ATV UTV Snow Plow Tire Chain Catalog 2010

Home of The Eagle Plow and Manufacturer ofATV, UTV, Snowmobile, and Motorcycle Accessories

®

Our journey began in 2002 as American Manufacturing unveiled what the industry labeled, “The new plow on the block”. It was named The Eagle Plow. That same plow has since earned the reputation as the “BEST plow on the block” What else could a consumer expect with a plow designed by some of the best people in the industry? American Manufacturing has since developed additional products for the ATV, UTV, Snowmobiles, and Motorcycles. We continue to pride ourselves in superior Made in the USA products, prompt customer service and innovative technology. Keeping with these values we hope our journey to be a successful, long, and enjoyable one. Enjoy our catalog and join us for the journey.

Table of ContentsNew Products 3Anatomy of the Eagle Plow System 4What to order for original ATV plow 6Original Plow Mount Application Chart 7Gen. II Front Mount ATV Plow 8-9Blades 10-11UTV Snow Plow 12-13Plowing Accessories 14Replacement Plow Parts 15The Eagle Winch 16Winch Mount Application Chart 17Winch Replacement Parts 18-19Tire Chains 20ATV Draw Bars 21Hand Shifters 21Grilles and Racks 22

Rails 23Hitches and Receivers 24Utility Baskets and Accessories 25UTV Accessories 26-27Snowmobile Accessories 28-31Clutch Pullers 32Motorcycle Accessories 33Shop Tools 34Trailer Accessories 35Hunting Accessories 36Warranty Information 36

American Manufacturing | www.eagleplows.com�

American Manufacturing | www.eagleplows.com

NEW PRODUCTS

Gen. II Front Mount ATV Plow by Eagle

JSee PageS 8 & 9

V ForceV Blade by Eagle

See Page 11

JEagle Winch 3500#

• DC 12V • Synchronized planetary gear system • Solid Steel reducer gear • Free spooling clutch • Automatic brake • Simply the BEST solenoid on the market! • 1 year limited warranty

See Page 16

J

Eagle Motion Pac by KYBSee Page 15

J

�

• Flat plate stays on wheeler during the summer acting as a skid plate.• No loss of ground clearance.• Grade 5 carriage bolts.• Made of 11 gauge steel.

Quick Mount SySteM

� American Manufacturing | www.eagleplows.com

J

J

J

Quick Latch Bracket SySteMJ• No pins to line up.• Install your plow in minutes.• Just roll machine on and lock down.

The Anatomy of the Original Eagle Plow System

• 12 gauge tubing• 1/4” mounting brackets• Strongest in the industry• Two cross members.• V-shaped to prevent blade sway• V-shaped to prevent blade sway

PuSh tuBe #�906J

J

The patented EAGLE plow mount system is a culmination of over 30 years of “in the field” engineering. It is designed as a two plate system and constructed of high strength steal. The two plates are referred to as the Model specific plate and the Universal Plate. 1. The Model Specific Plate mounts directly onto the undercarriage of the ATV. The mounting plates are designed to mount between the floor boards or foot pegs. The plate does NOT affect the oil draining capabilities of the ATV. It is constructed of 12- gauge steel. This plate remains on the ATV after you remove your plow. The plate acts as a skid plate to help protect the undercarriage of the ATV. We hand fit all of our plates providing true and accurate fitments. 2. The Universal Mount plate fits onto the Model Specific Plate. The plate provides 5/8” diameter rods to mount the Push Tubes. Our thirty years of “in the field” experience has proven to us that the mounting rods that attach the Push Tubes receive a lot of stress while plowing. The EAGLE PLOW, again, has surpassed all in the industry, creating the strongest and finest attachment.

Collectively the unique Patented Eagle Plow Mount System is user friendly. It provides ease of installation, good use of material, and is fabricated and engineered to be the strongest in the industry.We can honestly say that after 5 years in the industry, we have not had one complaint on strength and design. What more would an ATV enthusiast expect from a MADE IN THE USA product.

1 2

J

J

BLaDe SkiDS

• 5/8” Blade Swivel Pivot Mount and pin• 1/2” Blade Mounting Pivots• Swivel is constructed of 3/8” thick material and 1-3/4” angle iron for strength and wear• Swivel attaches to blade 20” apart for the strongest blade mounting system• Built-in blade stops (prevents dented blade)• 5 pivot positions up to 26.5o angle adjustment• 4 position, 3/8” thick blade pitch stop

J

• One piece, solid ductile steel, powder coated.• Designed for long lasting wear.• 7 gauge skid bracket, welded on for durability.• Height of skid fully adjustable.• Sure Lock pins to hold hardware on.• 3 rubber bushings absorb shock

J

SwiveL conStruction

The Anatomy of the Original Eagle Plow System

American Manufacturing | www.eagleplows.com 5

6 American Manufacturing | www.eagleplows.com

Original ATV Eagle Plow System

Push Tube (part #2906a)

Plow Mount (see pg. 7)

Blade of choice (see pgs. 10 & 11)

Hand Lift Kit or Winch and Winch Mount.

Accessories

1

5

3

2

J

4

There is no question that The Eagle Plow is the superior choice of plows. If you own an ATV you have two choices of design; this one, The Original Eagle Plow, or The Gen II Plow by Eagle, on the following page. If your choice is the Original Eagle Plow, this is what you will need to order:

�American Manufacturing | www.eagleplows.com

Original Plow Mount Application ChartJ

The following chart is designed to help you choose the correct mount for your machine. Red lettering indicates a UTV.

Year Model Plow Mt.1998-05 250/300 20102002-04 300/375 20102008-09 366* 20122002-04 400i/400 ACT/400 Auto/400 20101996-01 400/454 4X4 20101996-02 500/500i 20102000-02 500 AUTO 20202005-09 400/500/550 20102004-08 650* 20102006-09 700/700 mud pro 20102006- PROWLER 650 H1 (rear mount for winch) 28602008-09 PROWLER 700 28602009- PROWLER 550 28602006-09 PROWLER 650 H1 2860

ARCTIC CAT

CAN/AM BOMBARDIERYear Model Plow Mt.1999-05 Trax 21052002-05 Quest 21052003-06 Outlander 330/400 21102007-09 Outlander 400 21112006-10 V-Twin 500/600/650/800 21112007-09 Renegade 800 2111

Year Model Plow Mt.2007-09 20 hp Kohler 4x4 2822

CUB CADET

HONDAYear Model Plow Mt.1993-00 TRX 300 22152000-07 Rancher 350/400 22102007-09 Rancher 420 22301995-04 Foreman 400/450 22102005-08 Foreman 500 S/ES/FPE 22252001-09 Rubicon 500 22052003-09 Rincon 650/680 22052009- BIG RED 675 UTV 2815

Year Model Plow Mt.2005- 250 Bayou 23351989-03 300 Bayou 23201999-02 300 Prairie 23252002-08 360 Prairie 23151997-02 400 Prairie 23252002-04 650 Prairie 23152005-08 650 Brute Force 23152006- 650i Brute Force 23302004-06 700 Prairie 23152005-09 750 Brute Force 23302001-08 Mule 3000 Series 28202005-09 Mule 610 UTV 28402009-10 Mule 4010 28212008-09 Teryx RUV 2842

KAWASAKI

KUBOTA

POLARIS

Year Model Plow Mt.2004-09 900 RTV 4X4 28122008-10 1100 RTV 4x4 28122009- 500 RTV 4X4 2812

Year Model Plow Mt.2008- 300 Sportsman 24251995- 300 4x4 24202003-06 330 Magnum 24102004-05 ATP 330 2410Pre-1995 Sportsman 24201996-1998 400 Sportsman **2001-07 400 Sportsman 24052008-09 400 Sportsman 24252005-06 450 Sportsman 24051996-1997 500 Sportsman 24101998-03 500 Sportsman 24052009- 500 X2 24102008-09 500 Sportsman Touring 24102009- 550 Sportsman XP 24142004-05 ATP 500 24102006- 500 X2 24252007-08 500 X2 24122005-07 600/700 Sportsman 24102008- 700 X2 24122005-07 800 Sportsman 24102007- 800 X2 24122009- 800 X2 24102008-09 800 Sportsman Touring 24102009- 850 Sportsman XP 24141991-1999 6X6 24202000-06 6X6 24201996-01 Explorer 24102006- Hawkeye 24251995-1998 Magnum 24202004-08 Ranger 28502008-09 Ranger Crew 28502009- Ranger XP 28512008- 800 RZR 2852

JOHN DEEREYear Model Plow Mt.2004-05 Buck/Ext 21052004-05 Trail Buck 21052004-06 Gator HPX 28302007-09 Gator XUV 2830

SUZUKIYear Model Plow Mt.1999-02 LTF 250 F 25251999-2002 LTF 300 King Quad 25252008-09 King Quad 400 25202007-09 King Quad 450 25301998-1999 LTF 500 25202009- King Quad 500 25302004-06 Twin Peaks 700 23152005-07 King Quad 700 25302008-09 King Quad 750 25302002-07 Eiger 25202002-06 Vinson 25202007- Vinson 20102005- QUV UTV 2820

YAMAHAYear Model Plow Mt.2005-06 Bruin 250 2620Thru-05 Wolverine 350 26202004-06 Bruin 350 26152007-09 Grizzly 350 26151994-1998 Kodiak 400 26301999- Kodiak 400 26202000-02 Kodiak 400 26151997-06 Big Bear 400 26202007- Big Bear 400 **2007-09 Big Bear 400i 26402003-06 Kodiak 450 26152006- Wolverine 450 4 X 4 26152007-09 Grizzly 450 26151998-01 Grizzly 600 26252002-08 Grizzly 660 26152007-08 Grizzly 700 26152006-09 Rhino 450 28352004-08 Rhino 660 28352006-09 Rhino 700 2835

MSRP For ATVs $84.13MSRP For UTVs $123.13

2906a ATV Push Tube $221.35

American Manufacturing | www.eagleplows.com8

JGen. II Front Mount ATV Plow by Eagle

Introducing the Second Generation Plow System from Eagle PlowsNEW!

Front MountJ

choice oF BLaDeJ

#�906J

Quick Latch Bracket SySteMJ• No pins to line up.• Install your plow in minutes.• Just roll machine on and lock down.

• Mounts to the front of the ATV frame. • Lift height up to 28 inches. • Quick, easy 30 minute initial installation. • No more crawling under the machine for installation. • Winch lift ONLY. • Designed for Eagle Blades 60 inches or less. • Made in the USA!

READY... SET... PLOW...

1 2 3taketaket S MereLy Ly L �0 SeconDS to Put on anD oFF.

00:00:00 00:00:3000:00:15


Year Model Plow Mt. Winch Mt.

J

J

J

J

Year Model Plow Mt. Winch Mt.$95.00 $75.10

CAN-AM 2006-10 Outlanders 400,500,650,800,Max 3911 1112

YAMAHA2009 Grizzly 550 3915 16252002-08 Grizzly 660 3914 16352003-09 Grizzly 700 3915 1635

HONDA2003-09 Rincon 650/680 3905 12302003-09 Foreman/Rubicon 500 3925 1235

Gen. II Front Mount Application Chart3906 Front Mount Push Tube $225.003908 Push Tube for Tracks * $315.30

What to Order1. Push tube (below)

2. Front mount for your machine (below)(below)

3. Winch mount for your machine (below)

4. Eagle Winch 2500 or 3500 (pg. 16)(pg. 16)

5. Plow blade of choice (pg. 10,11)

$95.00 $75.10SUZUKI

2007-09 King Quad 450/750 3930 15302002-07 Vinson 500 3910 1505

KAWASAKI2008-09 750 Brute 3931 1341

POLARIS2005-09 Sportsman V-Twin 3930 14152009- Sportsman XP 3940 1415

JGEN II SYSTEM

* (3908 push tube is 3” taller and 11 3/4” longer than the 2805 standard push tube.)

The BladesJ

Standard Blades (16” tall)

72”72”

66”66”

60”60”

54”54”

50”50”

• Designed for UTVs• Standard 12 gauge steel• Plows a wide path• End supports for added strength

• Designed for UTVs• Great value

• Most popular plow for ATVs• Can be used on UTV’s; very versatile

• Most Popular blade sold!• Good value

• Designed for sidewalk plowing• Great for suburban driveways

#2922 72” BLACK, STANDARD BLADE#2924 72” YELLOW, STANDARD BLADE



#2912 54” BLACK PLOW#2913 54” YELLOW PLOW

#2910 50” BLACK, STANDARD PLOW#2911 50” YELLOW, STANDARD PLOW

MSRP $315.68

MSRP $277.60

MSRP $236.47

MSRP $194.70

MSRP $194.70


All Standard Blades constructed of 12 gauge steel. Powder coated.

Country Blades

60”

50”

23”23”

23”23”

27”

27”• Designed for UTV’s and large ATV’s• Standard 12 gauge steel• Rolls snow away from path• Top rubber flap included

#2925 60” BLACK, COUNTRY PLOW#2926 60” YELLOW, COUNTRY PLOW

• Designed for the ATV• Long driveways and lakes• Top rubber flap included

#2915 50” BLACK, COUNTRY PLOW#2916 50” YELLOW, COUNTRY PLOW

V-Blade New Product!

• Formed blade. Stronger than rolled.• 11 gauge steel. • Mounts to the standard Eagle Swivel System. • 4 different height positions to accommodate over size tires. • 3 blade skids (right, left and center)• Quick lock pins allow converting from standard to V-position in 30 sec. • Center wear bars and rubber flap. • Black powder coat finish. • Easy to use.• Made in the USA!

#2929 V FORCE V BLADE BY EY EY AGLE

18”

58”

66”V-mode

Straight

MSRP $311.10

MSRP $240.92

MSRP $444.00

NEW!


1� American Manufacturing | www.eagleplows.com

UTV Snow Plow by EagleJ

J

PuSh tuBe #�805J

J

PLow Mount

BLaDe

utv eagLe Front Mount

• Single mounting plate.• 7 gauge steel with dual 1/4” thick mounting tabs.• Grade 5 hardware and instructions included.

• Strongest in the Industry!• Push tube V shaped for added stability!• Lifts up to 28 inches.• Winch Lift only.• Standard Eagle Plow Swivel.• MADE IN THE USA.


1�American Manufacturing | www.eagleplows.com


2006-09 Prowler 650 H1, 550 2860 18602008-09 Prowler 700 2860 1860

ARCTIC CAT


2007-09 20 hp Kohler 4x4 2822 1822

CUB CADET


2001-08 Mule 3000 Series 2820 **2009- Mule 4010 2821 **2005-09 Mule 610 UTV 2840 18402008-09 Teryx RUV 2842 1842

KAWASAKI

KUBOTA

POLARIS


2004-09 800-900 RTV 4x4 2812 18122008-09 1100 RTV 4x4 2812 1812


2002-04 Ranger call 18492005-08 Ranger 2850 18502009- Ranger XP 2851 18512008-09 Ranger Crew 2850 18502008-09 800 RZR 2852 1852

JOHN DEEREYear Model Plow Mt. Winch Mt.

$123.10 $75.152004-06 Gator HPX 2830 18312007-09 Gator XUV 2830 1831 SUZUKI

Year Model Plow Mt. Winch Mt.$123.10

2005- QUV UTV 2820 **

YAMAHAYear Model Plow Mt. Winch Mt.

$123.10 $75.152006-09 Rhino 450 2835 16352004-08 Rhino 660 2835 16352006-09 Rhino 700 2835 1635

UTV Plow and Winch Mount Application Chart2805 UTV Push Tube $248.692808 UTV Push Tube for Tracks* $315.30

1. UTV Push Tubes (part# 2805)

2. Plow Mount Model Specific (below)

3. Plow Blade of Choice (pgs. 10-11)

4. Winch (2500# or 3500#, pg. 16)

5. Winch Mount Model Specific (below)

What to Order

* (2808 push tube is 3” taller and 11 3/4” longer than the 2805 standard push tube.)

J

American Manufacturing | www.eagleplows.com1�

Plowing AccessoriesJ

#2991 PLOW LIGHTIGHT K KIGHT KIGHTIGHT KIGHT ITIT • Increase visibility while plowing snow. • Complete with wiring harness, and two 16” lights. • Attaches to the push tube.

#2938 REMOTE BLADE POSITION KIT#2800 REMOTE BLADE POSITION KIT FOR THE UTVDesigned to reposition the blade while remaining on your machine. Simply pull the spring loaded lever, mounted on your handlebar, this will pull the pin. Your blade is now free to swivel. Find your desired blade position by applying gentle external pressure to blade. Listen for pin to lock back into new position.

#2950 PAIRPAIRP OF PLOW MARKERS Increase visibility while plowing snow.visibility while plowing snow.

#2941 LEFT SEFT SEFT IDE SHIELD#2942 RIGHT SIGHT SIGHT IDE SHIELD

• Reduce the side overflow of snow while plowing.• Use on the Standard Blades Only. • When using left and right together, snow will be

more contained.

#2945 RUBBER FLAP, 50” MSRP $27.12 #2946 RUBBER FLAP, 60” MSRP $38.28#2947 RUBBER FLAP, 72” MSRP $44.30#2948 RUBBER FLAP, 54” MSRP $31.86#2949 RUBBER FLAP, 66” MSRP $38.28All rubber flaps are made from 3/16” x 6” masticated rubber and come with installation hardware and instructions.

#2951 AMBER MAGNETIC BEACON LIGHT

• Plugs into cigarette lighter location with 8 foot coiled cord

• Strong magnet on bottom holds light firmly in place

#2900 HAND LIFT KIFT KIFT IT • Simplicity in assembly! • New, stronger 3/8” short lift rod,

no longer 5/16”! • New Cable lift design. • Longer stroke bell crank provides

better lifting action.

NEWLY

DESIGNED

MSRP $72.53MSRP $83.65

MSRP $150.35

MSRP MSRP $21.75

MSRP $50.00

MSRP $59.33

MSRP $131.85

#2986 SKID REPLACEMENT HARDWARE • 2 rubber spacers • 1 lynch pin • 10 washers

#2987 SKID & HARDWARE • 2 rubber spacers • 1 lynch pin • 10 washers • Bracket • 2 bolts

#2989 SKID & HARDWARE

#2990 SPRING & EYE BOLT

Replacement Plow PartsJ

WEAR BARS

Part # Product MSRP2970 Wear Bar 50” 26.102970CC48 Wear Bar Cycle Cty 48” 26.102970CC52” Wear Bar Cycle Cty 52” 26.102970M50 Wear Bar Moose 50” 26.102972 Wear Bar 54” 37.752972CC54 Wear Bar Cycle Country 54” 37.752972M55 Wear Bar Moose 55” 37.752972W54 Wear Bar Warn 54” 37.502975 Wear Bar 60” 34.252975CC60 Wear Bar Cycle Cty 60” 34.252975M60 Wear Bar Moose 60” 34.252975W60 Wear Bar Warn 60” 34.252978 Wear Bar 66” 35.992978VR Wear Bar 66” V Plow Right 21.842978VL Wear Bar 66” V Plow Left 21.842978CC66 Wear Bar Cycle Cty 66” 35.992980 Wear Bar 72” 39.362980CC72 Wear Bar Cycle Cty 72” 39.362980M72 Wear Bar Moose 72” 39.362980W72 Wear bar Warn 72” 39.36

#2940 DOWN PRESSURE UNIT • Applies 100 lbs. of down force.• Must be used with winch lift system.• Requires 17”- 20” of distance from fairlead to plow swivel.

All wear bars are made out of 1/4” x 2-1/2” hot-rolled material for long wear, and are all punched to manufacturer’s specs.Mounting hardware not included.

MSRP $9.74MSRP $30.77

MSRP $15.22 MSRP $23.62

#2939a EAGLE MOTION PAC PAC P BY KYB (ATV)BY KYB (ATV)BY #2939u EAGLE MOTION PAC PAC P BY KYB (UTV)BY KYB (UTV)BY

MSRP $90.00

MSRP $995.00 (#2939a & #2939u)


Finally... a hydraulic turn system that surpasses all expectations. Made by KYB for American Mfg.Side mounted, single cylinder chrome Shaft• Internal overload protection to prevent cylinder damage.• Over 3 years of testing.• 1 Year Manufacturer Warranty.

The EMP by KYB kit includes:• Wiring harness• Thumb-operated rocker switch• The EMP• Push tube with mounting brackets for your ATV or UTV

NEW!NEW!

16 American Manufacturing | www.eagleplows.com

The Eagle WinchJ

#1925 EAGLE 3500 LB. WINCH

• 39 feet of 7/32” cable with hook • Heavy-Duty roller fairlead • Snatch block • 72” battery cable wires and connector • 72” motor cable wires and connectors • Handlebar-Mounted rocker switch • All mounting hardware and instructions

NEWLY

ENGINEERED!

#1920 EAGLE 2500 LB. WINCH • 42 feet of 3/16” cable with hook • Heavy-Duty roller fairlead • Snatch block • 72” Battery cable wire and connectors • 72” Motor cable wire and connectors • Handlebar-Mounted rocker switch • All mounting hardware and instructions

American Mfg has collaborated with the Engineering Dept of the University of Wisconsin, Stout, to develop this superior, economical winch, that is quality assured in the USA. AMI has the capability of testing winches with a sophisticated, one of a kind, machine developed in conjunction with the University of Wisconsin, Stout.

The Eagle Winch, both the 2500# and the 3500#, include standard features that distinguish them as uniquely powerful and reliable tools. The standard has been raised and it is The Eagle Winch.

FEATURES:

• DC 12V • DC 12V • Synchronized planetary gear system • Synchronized planetary gear system • Solid Steel reducer gear • Solid Steel reducer gear • Free spooling clutch • Free spooling clutch • Automatic brake • Automatic brake • Simply the BEST solenoid on the market! • Simply the BEST solenoid on the market! • 1 year limited warranty • 1 year limited warranty

Gear Reduction Ratio 170:1Drum Size (Dia. x L.) 1.46” x 3.15”Mounting Bolt Pattern 3.13” 4-M8Dimensions 2500# (L x W x H) 12.4” x 4.6” x 4.4”Dimensions 3500# (L x W x H) 13” x 4.6” x 4.4”

SPECIFICATIONS / DIMENSIONS:

MSRP $164.43 MSRP $271.87

American Manufacturing | www.eagleplows.com 1�

Winch Mount Application ChartJ

Year Model Winch Mt.1998-05 250/300 10052002-04 300/375 10102008-09 366* 10122002-04 400i/400 ACT/400 Auto/400 10101996-01 400/454 4X4 10051996-01 500CC 10052002- 500i 10102000-01 500 AUTO 10052005-08 400/500/550 10152004-08 650* 10152006-08 700/700 MUD PRO 10152008-09 1000 TRV 10152009- PROWLER 550 18602006- PROWLER 650 H1 (rear mount for winch) 18652008-09 PROWLER 700 18602006-07 PROWLER 650 H1 1860

ARCTIC CAT

Year Model Winch Mt.1993-00 TRX 300 12402000-07 Rancher 350/400 12202007-08 Rancher 420 1225A1995-04 Foreman 400/450 12152005-06 Foreman 500 1230a2007-09 Foreman 500 S/ES/FPE 12352001-04 Rubicon 500 12102005-06 Rubicon 500 1230a2007-09 Rubicon 500 1235a2003-09 Rincon 650/680 1230a2009- Big Red 675 1815

Year Model Winch Mt.2007-09 20 hp Kohler 4x4 1822

CUB CADET

HONDA

Year Model Winch Mt.2004-05 Buck/Ext 11052004-05 Trail Buck 11052004-06 Gator HPX 18312007-09 Gator XUV 1831

JOHN DEERE

Year Model Winch Mt.2005- 250 Bayou N/A1989-03 300 Bayou 13302002-08 360 Prairie 13201997-02 400 Prairie 13102002-04 650 Prairie 13052005-08 650 Brute Force 13152006- 650i Brute Force 13402004-06 700 Prairie 13352005-07 750 Brute Force 13402008-09 750 Brute Force 13412005-09 Mule 610 UTV 18402008-09 Teryx RUV 1842

KAWASAKI

KUBOTA

POLARIS

Year Model Winch Mt.2004-09 900 RTV 4X4 18122008-09 1100 RTV 4x4 1812

Year Model Winch Mt.2008- 300 Sportsman 14251999-06 330 Magnum 14102004-05 ATP 330 1410Pre-1995 Sportsman 14001996-1998 400 Sportsman 14002001-04 400 Sportsman 14102005-07 400 Sportsman 14152008-09 400 Sportsman 14252005-06 450 Sportsman 14151996-1997 500 Sportsman 14101998-03 500 Sportsman 14102004- 500 Sportsman 14072005-09 500 Sportsman 14152008-09 500 Sportsman Touring 14152004-05 ATP 500 14102006-09 500 X2 14152009 500 XP Sportsman 14152002-04 600/700 Sportsman 14072005-07 600/700 Sportsman 14152008- 700 X2 14152005-07 800 Sportsman 14152007-09 800 X2 14152008- 800 Sportsman Touring 14152009- 850 XP Sportsman 14141991-1999 6X6 14002000-06 6X6 14101996-01 Explorer 14102006- Hawkeye 14251995-1998 Magnum 14002004-08 Ranger 18502008-09 Ranger Crew 18502009- Ranger XP 18512008-09 800 RZR 1852

SUZUKIYear Model Winch Mt.1999-2000 LTF 300 King Quad 15202001-02 LTF 300 King Quad 15152008-09 King Quad 400 15102007-09 King Quad 450 15302009- King Quad 500 15302004-06 Twin Peaks 700 13352005-07 King Quad 700 15302008-09 King Quad 750 15302002-07 Eiger 15052002-06 Vinson 15052007- Vinson 1505

Year Model Winch Mt.Thru-05 Wolverine 350 16552004-06 Bruin 350 16152007-08 Grizzly 350 16152000-02 Kodiak 400 16202003-06 Kodiak 400 16151997-06 Big Bear 400 16502007- Big Bear 400 16402007-09 Big Bear 400i 16402003-06 Kodiak 450 16152006- Wolverine 450 4 X 4 16602007-08 Grizzly 450 16152009- Grizzly 550 16251998-01 Grizzly 600 16102002-08 Grizzly 660 16052007-09 Grizzly 700 16252006-09 Rhino 450 16352004-08 Rhino 660 16352006-09 Rhino 700 1635

YAMAHA

Year Model Winch Mt.1999-05 Trax 11052002-05 Quest 11052003-06 Outlander 330/400 11102007-09 Outlander 400 11122006-10 V-Twin 500/600/800 1112

CAN/AM BOMBARDIER

MSRP $75.15

The Eagle Winch Mount is constructed of 7 gauge high tensile steel. Strongest in the Industry! The Eagle Winch mounts in conjunction with the Eagle Winch surpass Industry standards. Each mount is custom fit to the specifications of each machine and is designed to be placed behind the vehicle’s bumper for protection. See the application chart below to find your specific part number.Red lettering indicates a UTV.


#1910 SNATCH BLOCK AND HOOKDouble your line pull with this superior Snatch Block and hook.

#1912 CABLE AND HOOKReplacement cable and hook for 2500# Winch. Includes 42 feet of 3/16” cable and cast G43 hook.

#1914 REPLACEMENT SEPLACEMENT SEPLACEMENT OLENOIDSuperior internal contacts for longevity. Most reliable solenoid on the market. Compatible with wireless remote.

#1915 WIRELESS REMOTE CONTROL KONTROL KONTROL ITOperate your winch from up to 50 feet away. Key fob key chain control. Works with 2500 or 3500 Eagle Winch.

#1913 ROCKER SWITCHCompact, durable rocker switch.

#1916 REPLACEMENT CEPLACEMENT CEPLACEMENT ABLE HOOKCast G43 steel hook with a spring loaded safety latch.

#1900 HEAVY DEAVY DEAVY UTY RUTY RUTY OLLER FAIRLEAD FAIRLEAD FMade from 11 gauge steel and has three 7/8” rollers and a 1 1/8” bottom roller for longer cable life when lifting your snow plow. Rollers have nylon bushings for smooth operation. The bolt patternis the standard bolt pattern.

Winch Replacement PartsJ

MSRP $25.00

MSRP $29.12

MSRP $37.67

MSRP $39.95

MSRP $18.83

MSRP $5.95

MSRP $39.51

#1911 SWITCH/SOLENOID COMBOMSRP $57.64

#1917 SYNTHETIC WINCH ROPENew 3/16” x 42’ synthetic winch rope is safer than traditional wire cables. Eliminates wire slivers and saves weight. To be used in conjunction with aluminum hawse and spools.

MSRP $79.00

#1918 CABLE GUIDE• Designed to guide your cable on the spool.

MSRP $16.20

#1919 ALUMINUM HAWSE• Solid cast aluminum hawse• Smooth edges all around to protect synthetic rope from damage• Comes complete with Hardware

MSRP $16.00

#1921 ROPE AND ALUMINUM HAWSE• Complete Synthetic rope conversion kit.• Synthetic rope, hawse and hardware.

MSRP $95.00


NEW!NEW!

NEW!NEW!

Ea gle Winch

American Manufacturing | www.eagleplows.com�0 American Manufacturing | www.eagleplows.com��0000000000000

Tire ChainsJ

Size A Tire Chains(chain size- 52”L x 14.5” W, 52”L x 14.5” W)Tire Size Chain # MSRP22x11x8 3301 41.2322x10x9 3301 41.2322x10x10 3301 41.2322x11x9 3301 41.2322x11x10 3301 41.2322x8x11 3301 41.2325x11x8 3301 41.23

Size B Tire Chains(chain size- 54”L x 14.5” W, 54” L x 14” W)Tire Size Chain # MSRP24x9x11 3302 43.9024x11x10 3302 43.9024x10x11 3302 43.9025x8x12 3302 43.90

Size C Tire Chains(chain size- 56” L x 16” W)Tire Size Chain # MSRP24x13x9 3303 43.3425x13x9 3303 43.3425x12x9 3303 43.3425x12x10 3303 43.3425x10x12 3303 43.3425x11x10 3303 43.3425x13.5x12 3303 43.34

Tire Size Chain # MSRPFor oversized 26” tires 3304 57.00

Size C+ Tire Chains(chain size- 61” L x 16” W)

Tire Size Chain # MSRPFor oversized 27” tires 3305 63.05

Size D Tire Chains(chain size- 66” L x 16” W)

Eagle Tire Chains come with hardened V-Bars welded to the chain links for greater traction in winter conditions.The deeper links will not fall between tire lugs.Chains come in a handy storage/display case.

®

American Manufacturing | www.eagleplows.com �1

®

#9000 RECEIVER HITCH DOUBLE STEPA great unit for getting in and out of the box with or without a camper• Three position adjustability going in and out of the receiver.• Heavy duty construction and diamond tread plate on steps.• Powder coated with a satin finish for long lasting wear.• Weight capacity of 300 pounds.

• Allows you to use a ball mount or pin pull hitch without changing hitches.• MADE IN THE USA.

#4676 UNIVERSAL DNIVERSAL DNIVERSAL RAW BARTwo holes, even plane. Comes with hole for 3/4” shank and 1/2” pin hole on end.Has a 3/8” pin up hole for the 1 1/4” ATV receiver hitches. Made out of 1/4” steel.

#4734 DROP DRAW BARSame as the 4676, but has a 2” offset. Offset is reversible for height adjustment.

#4877 UNIVERSAL 1 1/4” ATV NIVERSAL 1 1/4” ATV NIVERSAL RECEIVER HITCHBolts on to most current ATV hitches.Allows you to use the American Mfg. draw bar to provide enhanced versatility. Comes with 3/4” nut/bolt and 3/8” wire loop pin.

#4890 1 1/4” DRAW BARMade of 3/8” thick tongue material. Set for a 1” shank, 1 1/2” offset and this hitch has a 1/2” pin up hole.

Our Hand Shifters are the perfect fit for those of you who like to go mudding or exploring in deep water. They easily attach to your foot shifter lever and give you easy access to shifting while your ATV is partially submerged. You can keep you feet high and dry. Made from 5/8” tubing and a heavy duty clamp on system with an easy-grab round knob on top.

ATV Draw BarsJ

Hand ShiftersJ

Year Model 14 inch 20 inch2000-2002 250 2x4 4632 46202000-2002 250 4x4 4632 46202000-2001 300 2x4 4632 46202000-2001 300 4x4 4632 46202000-2001 400* 4632 46202000-2001 500* 4632 46202002* 500 4x4 4632 46202002* 500 I 4x4 4632 4620

Year Model 14 inch 20 inch1987-2002 Quadrunner LT 250 4x4 ** 46982002-2009 Ozark 250 ** 46981992-2001 King Quad LT 300 4x4 ** 46982008-09 King Quad 400 46981998-2002 Quadrunner LT 500 4x4 ** 46982002-2007 Vinson 4x4 Semi-Auto ** 46982002-2007 Eiger 4x4/2x2 semi-auto ** 4698

ARCTIC CAT

HONDA

KAWASAKI

Year Model 14 inch 20 inch1997-2009 TRX 250 S Recon 4632 46201988-2000 TRX 300 4632 46202000-2006 TRX 350 Rancher 4x4/2x2 4632 46201999-2003 TRX 400 Foreman 4632 46202004-2006 TRX 400 Rancher 4x4 4632 46202007-09 TRX, TM &TE 420 Rancher 4632 46201998-2009 TRX 450 S/FM Foreman 4X4 4632 4620

Year Model 14 inch 20 inch1995-2001 Bayou 220 2x4 4632 46202003* Bayou 250 (replaces 220) 4632 4620

SUZUKI

YAMAHAYear Model 14 inch 20 inch1999-2004 Beartracker 250 4632 46202005-2006 Bruin 250 4632 46201987-1999 Big Bear 350 4x4/2x2 ** 40542000-2005 Wolverine 350 4x4 4632 46201995-1997 YFM 350R 4632 46202000-2004 Big Bear 400 4x4/2x4 ** 40542005-2009 Big Bear 4x4 ** 4054

1995-2002 Lakota 300 4632 46201995-2003 Bayou 300 2x4 4632 46201995-2003 Bayou 300 4x4 4632 46201995-1999 KLF 400 4632 4620

KAWASAKI (cont.)

#4676 #4734

MSRP $32.95

MSRP $34.41

MSRP $35.35

MSRP $32.95

MSRP $67.85

#4841 UNIVERSAL RNIVERSAL RNIVERSAL ISER HITCH3” riser hitch. 5/16” thick with ball mount andtow hoop. All mounting hardware included.

MSRP $31.00

MSRP for all hand shifters $25.10

American Manufacturing | www.eagleplows.com��

RacksJ

ATV RacksThe ATV racks are specifically designed for each ATV application with custom mounting hardware. Built out of 7/8” round 16 gauge tubing- the largest in the industry.

Year Model Front Rear1993-01 TRX90 ** 41961990-on TRX 200L 4152B **1987-92 TRX 250 X 4164B **1993-03 TRX 300 EX 4164B **

Year Model Front Rear1995-03 Wolverine 350 4x4 4467 42621990-99 Timberwolf 4440 41811988-01 Blaster 7951B 40011989-03 Breeze 4061B 45751987-06 Warrior 350 4590 4589

Year Model Front Rear1997-09 Scrambler 500 4x4 4282B 42811995-02 Scrambler 400 4282B 42811997-99 Sport 400L 4282B 42811995-017 Trailblazer 250 4282B 42812008-09 Trailblazer 300 4282B 4281

POLARIS

YAMAHAHONDAFront & Rear Racks App. Chart

GrillesJ

#0400 SUPER GRILLThe American Mfg. grilles are designed to protect the stock plastic bumper and headlights. They are constructed of 1 1/2” round 16 gauge tubing, powder coated black. Protect your investment by adding this great grille. Each Make/Model Grille is the same design product #0400. Mounting kits vary. Does not replace the stock bumper. See application chart below.

KAWASAKI

Year Model Grille2005-07 400 4905

Year Model Grille2004-05 Outlander Standard/Max 4925 2006-09 Outlander Standard/Max 4920

Year Model Grille2004-06 350 Rancher 4777 2004-06 400 Rancher 4777 2007-09 420 Rancher 49852005-09 Foreman 500 S/ES/FPE 4981 2005-09 Rubicon 500 49812003-09 Rincon 650/680 4980

Year Model Grille2006 700 Prairie 4930

Year Model Grille2002-07 500 Vinson 4796 2009 500 King Quad 49102005-07 700 King Quad 4910 2008-09 750 King Quad 4910 2007-09 450 King Quad 4910

Year Model Grille2005-06 400/450 Kodiak 4784 2007-09 350 Grizzly 47842007-08 450 Grizzly 4784 2009 550 Grizzly 49452002-08 660 Grizzly 4940 2007-09 700 Grizzly 4945

ARCTIC CAT

HONDA

SUZUKI

YAMAHA

BOMBARDIER

MSRP for grille part #0400 $ 75.00MSRP for grille hardware $50.00

Front Rack MSRP $98.70Rear Rack MSRP $98.75

American Manufacturing | www.eagleplows.com ��

Front and Rear RailsThe perfect accessory for carrying extra equipment or gear. American Mfg. Rails are built from 3/4” round 16 gauge tubing and are custom fitted to each individual rack shape for a finished look and nice fit. Easily attaches to OEM racks with U-Clamps. All hardware is provided. Front extensions are 5” tall. Rear extensions are 8” tall.

RailsJ

YAMAHA

ARCTIC CAT

CAN/AM BOMBARDIER

HONDA

KAWASAKI

JOHN DEERE

POLARIS

SUZUKI

Year Model Front Rear2000-01 300cc ** 42932002* 375 4x4 Automatic 4814* 4257B2002* 400i 4814* 4257B2002* 400 4x4 4814* 4257B2005-07 400cc 5021* 50222000-01 400/500 4297* 42932002-04 400/500/650 5020* 50302008-09 400/500/550/650/700 5019* 50262005-07 500/650 5021* 50252002* 500 4x4 4814* 4257B2002* 500 4x4 TBX Automatic 4814* 4257B2006-07 700cc 5021* 50252009 550/700/1000 TRV 5019*

Year Model Front Rear2002-05 Traxter 500 5121* 42992001-05 Quest 650 5121* 42992003-05 Outlander 5120* 51222006-10 Outlander 5220* 5123

Year Model Front Rear1991-1996 TRX 200 Type II 4422* 42941997-06 TRX 250 Recon ** 42941988-01 TRX 300 4258* 4257B2000-03 TRX 350 Rancher 4759* 4257B2004-06 Rancher 350/450 5220* 48691999-04 TRX 400 Foreman 4424* 4275B2007-09 Rancher 420 FM/ES 5224* 52231998-04 TRX 450 Foreman 4424* 4257B2005-09 Foreman 500 S/ES/FPE 5224* 52212000-04 Rubicon 500 4760* 47492005-09 Rubicon 500 5220* 52212003-09 Rincon 650/680 4872* 4869

Year Model Front Rear2004-05 Buck 5121* 42992004-05 Trail Buck 5121* 4299

Year Model Front Rear1995-02 Lakota 300 ** 4257B1995-03 Prairie 300 4x4/2x4 4761* 4257B2004-08 Prairie 360 4761* 53301997-02 Prairie 400 ** 4257B1995-1999 KLF 400 Bayou ** 4257B2003-05 KVF 650 4x4 Prairie 4772* 4257B2004-08 Brute Force 650 5320* 53312006- Brute Force 650i 5321* 53322004-06 Prairie 700 5320* 53312006-07 Brute Force 750 5321* 53322008-09 Brute Force 750 5321 5333

Year Model Front Rear2004- Sportsman ALL 5420* 54302008- Sportsman 300 ** 54371999-02 Magnum 325 4287* 42881998-02 Xpedition 325/425 4296* 42881999-02 Trail Boss 325 4296* **1998-02 Sportsman 400 4296* 42992008-09 Sportsman 400 ** 54371999-02 Magnum 500 4287* 42881998-02 Sportsman 500 HO 4287* 42882006-09 500 x 2 5425* **2008-09 Sportsman 500 HO 5425* 54352008- 700 x 2 5425* **2007-09 800 x 2 5425* **2008-09 Sportsman Touring 500/800 5425* **2005-07 Sportsman ALL 5425* 54351999-02 Xplorer 4287* 4288

Year Model Front Rear1999-01 King Quad LT 250 4297* 4257B2000-01 Quadrunner LT 250/500 4639* 4257B2002-07 Eiger 400 4761* 48692007-09 King Quad 450 5220* 42561998-01 LT 500 4639* **2009 King Quad 500 5220* 42562002-06 Vinson 500 4 x 4 5520* 42562004-05 Twin Peaks 700 5320* 53312005-06 King Quad 700 5320* 42562007- King Quad 700 5220* 42562007-09 King Quad 750 5220* 42561999-01 King Quad LT 4x4 4297* 42572000-01 Quadmaster 4639* 4257B2000-01 Quadrunner LT-4x4 4639* 4257B

Year Model Front Rear1999-03 Beartracker 250 ** 42571987-99 Big Bear 350 4 x 4 ** 48692000-06 Big Bear 400 ** 48692007-09 Big Bear 400i 4259* 48692004-06 Bruin 250/350 4259* 44262007-09 Grizzly 350 4259* 44262007-09 Grizzly 450 4259* 48692009 Grizzly 550 4761* 48691998-01 Grizzly 600 4291* 48692002-08 Grizzly 660 4 x 4 4296* 48692007-09 Grizzly 700 4761* 48692004-06 Kodiak 400 4259* 48691993-03 Kodiak 400/Ultramatic 4291* 48692003-06 Kodiak 450 4259* 48691996-00 Timberwolf 4290* 44192000-05 Wolverine 350 4 x 4 ** 4419

MSRP for Front Rails $62.90 MSRP for Rear Rails $70.53

�� American Manufacturing | www.eagleplows.com

Hitches and ReceiversJ

Expand the use of your ATV. Try our Made in the USA hitches.Made in the USA hitches.Made in the USA Constructed of heavy gauge steel, powder coated black, and custom fit to each machine. All models have a 3/4” hole for standard size hitch balls. Instructions and hardware included.

Year Model Hitch2002-2005 Rally 48302007-2009 Renegade 800 5775

YAMAHA

Year Model Hitch1995-2002 Scrambler 400 4283a1996-2004 Scrambler 500 4x4 4283a

SUZUKI

Year Model Hitch1987- KSF 110 76281987- KSF 250 876721995-2002 Lakota 300 44512002-2005 KVF 650 4x4 Prairie 4825

Year Model Hitch1990- TRX 200L 41672003-2004 TRX 90 41971987-1992 TRX 250X,300X 42221997-2005 TRX 250 S/ES Recon 45092000-2001 TRX 350 Rancher 2x4, 4x4 47042000-2009 Rubicon 500 47042002-2009 Rincon 650/680 4870a

Year Model Hitch1989- YFM 80 Badger 40671989- YFM 100 Champ 40671989-2003 Warrior 350 44622004-2006 Bruin 350 42692000-2003 Wolverine 350 4x4 42682003-2004 Kodiak 400/450 42692006* Wolverine 450 4x4 42691998-2001 Grizzly 600 46751989-2003 Breeze 40631988- Blaster 79521987-1988 YFM 350X Warrior 7605

Year Model Hitch1987- LT 80 76501989- LT 230E Limited 41612002-2006 LT-F/Ozark 250 48382004-2007 LT-Z 250 4838

POLARIS

KAWASAKI

HONDA

CAN/AM BOMBARDIER

Our receiver hitches are constructed from heavy-grade steel and provide a 75 pound tongue weight capacity. These quality receiver hitches come standard with all mounting hardware and instructions. Powder coated black. Accepts 1 1/4” draw bar.

Hitch

App. Chart

Year Model 1.25 inch 2 inch2000-2001 300 4x4 47292002* 375 4x4 Automatic 47672000-2001 400* 46862002* 400 4x4 47672002* 500 4X4, 4X2 4767

YAMAHA

Year Model 1.25 inch 2 inch1999-2004 Traxter 500 47061999-2004 Traxter XT 47062001-2005 Quest 650 47062001-2005 Quest 650 XT 47062006-2010 Outlanders 5703 57042007-2009 Renegade 800 5700 5701

Year Model 1.25 inch 2 inch1997-2006 TRX 250 S Recon 46911988-2001 TRX 300 46682000-2006 TRX 350 Rancher ES 47041999-2003 TRX 400 Foreman 46921998-2003 TRX 450 Foreman 4X4 46842000-2009 Rubicon 500 47042004-2009 Foreman 500 47042003-2009 Rincon 650 5715 5716

Year Model 1.25 inch 2 inch1995-2003 Prairie 400 46941995-1999 KLF 400 46932004-2005 KVF 650 4x4 Prarie 48242005-2009 Mule 610 5961

Year Model 1.25 inch 2 inch1999-2002 Xplorer 250 4x4 46881998-2002 Xpedition 325 46811999-2002 Magnum 325 46811999-2002 Xplorer 400 46881998-2002 Sportsman 400 46951998-2002 Xpedition 425 46811998-2002 Sportsman 500 H.O. 46951999-2002 Magnum 500 46811998-2002 Sportsman 500 6x6 46952002* Sportsman 700 4695

Year Model 1.25 inch 2 inch1999-2001 King Quad LT 250, LT 4x4 46832000-2001 Quadrunner LT 250 4x4 46792000-2004 Quadrunner LT 500 4x4 46792000-2001 Quadrunner LT 4x4 46792000-2001 Quadmaster 46792002-2004 Vinson 500 4x4 48192002-2004 Quadrunner Eiger 4819

Year Model 1.25 inch 2 inch1999-2003 Beartracker 250 46971995-2005 Wolverine 350 4x4 47002007-2009 Grizzly 350 5710 57111999-2002 Big Bear 400 4x4 47171999-2002 Kodiak 400 4x4 46902007-2009 Big Bear 400i 5710 57112007* Grizzly 400 5710 57112006* Kodiak 400i/450i 5710 57112007* Grizzly 450 5710 57111998-2001 Grizzly 600 46752002* Grizzly 660 4x4 4822

ARCTIC CAT

CAN/AM BOMBARDIER

HONDA

KAWASAKI

POLARIS

SUZUKI

Rece

iver

Hitch

App. Chart

JOHN DEEREYear Model 1.25 inch 2 inch2004-2006 John Deere Gator HPX 5960

Hitches

Receiver Hitches

MSRP $30.80

MSRP for 1.25 in. $84.13MSRP for 2 in. MSRP for 2 in. $$123.13123.13


Utility Baskets & AccessoriesJ

These utility baskets are excellent for holding tools and hardware for projects. Baskets are made of perforated steel with solid corners. The baskets have a universal mounting hardware included and can easily be mounted to the front or rear ATV rack.

#5945 SMALL BMALL BMALL ASKET (17” X 12” X 4”)

#5946 LARGE B BASKET (29” X 12’ X 4”)

#4879 FRONT URONT URONT TILITY BTILITY BTILITY ASKETPowder coated in INNOTEK rubber coating to decrease noise and vibration.

#5940 UNIVERSAL DNIVERSAL DNIVERSAL ROP RACKThe drop rack is a two piece design built from 3/4” square 16 gauge tubing with a simple mounting system and solid bottom tray. The two piece design allows you to easily remove the drop section while leaving the other half on the ATV rack. Perfect for work around the yard or in the woods. Powder coated in INNOTEK rubber coating to decrease noise and vibration.

#4880 REAREAR UTILITY BTILITY BTILITY ASKETPowder coated in INNOTEKPowder coated in INNOTEK rubber coating to decrease noise andcoating to decrease noise andvibration.

These Utility Baskets are well constructed with a 3/4” square tubing frame and come with an easy bolt on hardware kit. These Baskets allow you to carry that extra load to get the job done.

#4541 LICENSE PLATE HOLDERAn easy way to display you license and state sticker. Black zinc plated and comes with 2 rubber-coated clamps and hardware for mounting to your rear rack.

#4234 ONE GAL. GAS CAN CARRIERSimple design carrier comes with a one gallon gas can. Adapter kit available for certain ATV’s. See below.

#4815 GAS CAN / COOLERThis unit easily mounts to the rack on your ATV and allows you carry a large gas can or cooler. Inside dimensions are 16 1/2” x 11 1/2” x 9” deep.

#4977 STEEL RACK ADAPTOR KIT(for ATV’s with no back rail or small back rail) Sold as a single.

#4974 05-08 POLARIS RACK MOUNT BRACKET

MSRP $233.43

MSRP $97.25

MSRP $85.85

MSRP $117.29 MSRP MSRP $135.75

MSRP $10.15

MSRP $49.43

MSRP $22.59MSRP $40.89

MSRP $62.90

American Manufacturing | www.eagleplows.com�6

UTV AccessoriesJ

UTV Rear Bumpers• Custom fit, Heavy Duty, rear bumper.• Powder coated black.• All hardware and instructions included.

Year Model BumperBumper MSRP2006-09 Yamaha Rhino 450 5980 $99.602004-07 Yamaha Rhino 660 59805980 $99.602007-09 Yamaha Rhino 700 5980 $99.602005-09 Kawasaki Mule 610 59815981 $99.602008-09 Kawasaki Teryx 750 5982 $99.602004-06 John Deere Gator HPX 59835983 $99.602007-09 John Deere Gator XUV 5983 $99.602006-09 Arctic Cat Prowler 5984 $99.602004-09 Polaris Ranger 5985 $99.60

UTV Box RailsLaser cut from heavy-duty 10 gauge steel, these box rails easily bolt on and provide extra tie down capabilities. Sold in pairs.

Year Model Rail MSRP2006-09 Yamaha Rhino 450 5976 $71.702004-07 Yamaha Rhino 660 5976 $71.702008-09 Yamaha Rhino 700 5976 $71.702008-09 Kawasaki Teryx 750Kawasaki Teryx 750 59755975 $71.702009 Honda Big Red 5974 $71.702009 Polaris Ranger XP 5991 $103.99

JOHN DEERE GATOR BOx RAILS• 3 piece design, two sides, one front. • Strong, square tubing.• Bolt onto existing holes.• Powder coated black.• Over 500 SOLD!• Made in the USA.

Year Model BumperBumper MSRP2002-09 XUV & HPX 4x4 & 4x6 5972 $222.302004-09 TS 4x2 59625962 $222.30

��American Manufacturing | www.eagleplows.com

UTV Front Bumpers• Heavy Duty Bumper to protect your UTV.• Some assembly required.• Bumpers work in conjunction with the Eagle Winch Mounts.• All hardware and instructions included.

Year Model Bumper MSRP2004-09 Polaris Ranger/ Crew 5986 $99.602009 Polaris Ranger XPPolaris Ranger XP 5989 $99.602008-09 Polaris Razor 5990 $88.752006-09 Yamaha Rhino 450 5978 $88.752004-07 Yamaha Rhino 660 5978 $88.752008-09 Yamaha Rhino 700 5978 $88.752006-09 Arctic Cat Prowler 5987 $88.752009 Honda Big Red 5969 $88.752004-09 John Deere Gator HPX/XUV 5988 $88.75

UTV Light Bars• Strong 1 1/2 inch,16 gauge tubing• 4 light tabs for lights of choice, lights not included.• Powder coated finish.

Year Model Bar MSRP2006-09 Yamaha Rhino 450 5977 $63.302004-07 Yamaha Rhino 660 5977 $63.30$63.302008-09 Yamaha Rhino 700 5977 $63.302008-092008-09 Kawasaki Teryx 750 5971 $63.30$63.302007-09 John Deere Gator XUV 5973 $63.30

American Manufacturing | www.eagleplows.com�8 American Manufacturing | www.eagleplows.com��8888888888888888888

#8010 SHOP DOLLY DELUXE, RED

SnowmobilesJ

The ORIGINAL shop dolly. This is truly the “grandaddy” of all! Designed and fabricated in 1966. Continuously improved to keep up with the changing snowmobiles but always Made in the USA.

• Lifts 25% easier than all the competition.• Soft Rubber pads accommodate 38-51” wide snowmobiles.• Adjustable lift strap secures sled.• Heavy Duty Steel construction can withstand the weight of the heaviest sleds.• “Feet” on the bottom aid in upright storage.• Exclusive Break apart design.• Heavy duty Knobby tires (480x4.0-8).• Powder coated red.• Long reach arms.• Will accommodate single and two up sleds.

Package size is 40” x 26” x 7” which is half the size of our competitors. No oversize shipping charges. U.S. PATENT# 7036832B2

MSRP $295.00

#8010-1 SHOP DOLLY PAD, ROD AND PIN MSRP $28.95#8015 SHOP DOLLY, TOLLY, TOLLY URF WHEEL, REPLACEMENT MSRP $55.00#8018 SHOP DOLLY, LOLLY, LOLLY IFT SIFT SIFT TRAP WITH HOOK, REPLACEMENT MSRP $25.00

American Manufacturing | www.eagleplows.com �9American Manufacturing | www.eagleplows.com ��999999999999

#8030 SNOWMOBILE WORK STAND • Strong, rectangle tubing construction with grade 5 hardware • Heavy duty 5000 lbs. jack • Rubber lifting points • Lifts up to 31” and collapses to 5 1/2” • Tough baked on powder coat finish

#8035 WHEEL KIT• Bolts on for easy mobility• Comes with 4 wheels and brackets and all mounting hardware.

#8028 REPLACEMENT JACK• 5000 pound jack

MSRP $300.00

#8031 REPLACEMENT CRANK

MSRP $92.50

MSRP $51.35

MSRP $20.00

American Manufacturing | www.eagleplows.com�0

Snowmobiles AccessoriesJ

#3330 TIE DOWN CRANKFeatures a 1/2”-13 thread size and is adaptable to most popular snowmobile trailers with the “screw down” style tie-downs. Has a 2” diameter swivel handle which allows for rapid tightening and improved leverage. 6” of thread and yellow zinc plating for corrosion resistance. (Sold individually)

#8040 EZ-TRAC STANDEasy and portable way to keep you track from freezing to the ground. Adjustable from 19 1/2” to 29 1/2”. Keeps load off rear suspension while stored.

#8045 JACK POD• Built from 1/2” material• Durable non-slip rubber coated finish• Post height at 26 1/2” for most long travel sleds• Perfect for off season storage storage

#8072 WARM UP STANDHeavy duty warm up stand with Heavy duty warm up stand with one-piece tubular formed frameone-piece tubular formed frameKeeps track from freezing downKeeps track from freezing downSet for 26” of lift for most long Set for 26” of lift for most long travel sleds.travel sleds.

#8074 LEVER LIFT STANDLEVER LIFT STAND• Lifts with ease up to 39”• Lifts with ease up to 39”• Post adjusts 9” to lift most sleds• Post adjusts 9” to lift most sleds• Easy lifting geometry• Easy lifting geometry• Heavy Duty steel frame• Heavy Duty steel frame• Black powder coated finish• Black powder coated finish

#3327 1 1/4” SQUARE TIE DOWN BAR1 1/4” tie down bar is a simple easy way to clamp your sleds down to you trailer. Comes with rubber covered end caps for ski protection.

#3328 1” X 2” RECTANGLE TIE DOWN BAR (same as above)

MSRP $108.00 MSRP $75.00

MSRP $36.60

MSRP $35.75

MSRP $17.00

MSRP $26.70

MSRP $26.70


PLASTIC SLED SLIDESThe plastic sled slides are molded from a high density plastic for strength. Each one has 4 snap in swivel caster wheels on each platform. Ideal for moving your sled around in your shop.#8056 BLACK PLACK PLACK LASTIC#8058 BLUE PLASTIC#8060 RED PLASTIC

#8070 STEEL SLED SLIDESThese sled slides are a must for moving your sled around in your garage. Constructed of heavy-duty steel alloy and a tough, black powder coat finish, they have a large non-slip surface and 2 1/2” swivel caster wheels. Designed to work with all skis and carbide arrangements, dual runners, tunnel and powder skis.

ski radius (rear)

#8100 FOLDING UTILITY SLEDThis Utility Sled is an easy choice for towing behind your snowmobile or ATV in the winter. It bolts together fast and easy. New ATV in the winter. It bolts together fast and easy. New Afolding design allows for easy storage when not in use. This sled is built to keep up with your snowmobile at any speed.

• Perforated dog sled standing platform• 45” x 24” deck space• Rubber cushioned hitch with snow shield

• Radiuses back ski corners• UPS shippable

#8105 REPLACEMENT SEPLACEMENT SEPLACEMENT KI #8130 REPLACEMENT HEPLACEMENT HEPLACEMENT ITCH TONGUE

MSRP $364.25

MSRP $31.40 MSRP $52.75

MSRP $60.40 MSRP $58.35

��

Clutch PullersJ

#9329 YAMAHAYAMAHAY YPZ-YXRAMAHA YPZ-YXRAMAHA• Hardened high-carbon steel machined to precise tolerances. Black oxide finish• 86 and up

#9321 ARCTIC CAT 9 BAT 9 BAT OLT• Hardened high-carbon steel machined to precise tolerances. Black oxide finish• Fits all new Arctic Cat clutches

#9322 ARCTIC CAT CAT CAT OMET• Hardened high-carbon steel machined to precise tolerances. Black oxide finish• Fits all Arctic Cat clutches

#9323 POLARIS• Hardened high-carbon steel machined to precise tolerances. Black oxide finish• For 1999-2001 XCR 700-800 Fuji• 2000-2001 Domestic Twins 500-600-700-800• 1999-2001 Edge-Pro-X 440

#9324 POLARIS• Hardened high-carbon steel machined to precise tolerances. Black oxide finish• For 1997-1999 Domestic Twins 440-500-600-700

#9327 SKI-DOO T.R.A. (through 2004)• Hardened high-carbon steel machined to precise tolerances. Black oxide finish• 95 MXZ All 670 and All Triples• Includes clutch button retainer clips

#9328 SKI-DOO T.R.A• Hardened high-carbon steel machined to precise tolerances. Black oxide finish• 1994 MXZ and most MX’s• All 583 enigines• Includes clutch button retainer clips

#9325 POLARIS/COMET• Hardened high-carbon steel machined to precise tolerances. Black oxide finish

MSRP $46.10

MSRP $37.60 MSRP $37.60

MSRP $37.60

MSRP $37.60MSRP $29.65


MSRP $37.60MSRP $32.55

American Manufacturing | www.eagleplows.com ��

#3342 QUICK RUICK RUICK ELEASE KITThe quick release is designed to be securely mounted to the floor and provide a quick and easy way to install and remove your wheel chock. Built from 10 gauge steel. Powder coat finish; all hardware included.

WHEEL CHOCKSWheel Chocks are made from 7/8”-16 gauge tubing and are one piece solid formed construction for strength. All wheel chocks have four mounting holes and a tough, baked on, powder coat finish.

#3310 MINI (4.25” INSIDE WIDTH) MSRP $18.45#3312 MOTO/STREET (5” inside width) MSRP $18.70#3316 ATV/CRUISER (10.75” inside width) MSRP $25.70

#3312#3316

#3312

DIRT BIKE RACKSEach Dirt Bike Rack is specifically designed to custom fit each application. The 69000 series are made from 16 gauge tubing and hand-welded. The 7000 series are laser cut from 10 gauge steel. Both series are custom-formed for each model. These racks are perfect for carrying light loads or a little extra gear.

Tubular Bike Rack App. ChartYear Model Rack MSRP1991- CT 70 69101 $50.351991-96 XR 250L 69102 $50.351996-06 XR 250 69701 $50.351996-06 XR 400 69701 $50.351992-09 XR 650L 69202 $50.35

Year Model Rack MSRP1991- KLR 250 69104 $50.35

Year Model RackRack MSRP1990-92 DR 250S 69103 $50.351990-93 DR 350S 69103 $50.35

Year Model Rack1987-06 TW 200 TrailwayTW 200 Trailway 69212 $50.351992-06 XT 225 69201 $50.351985-00 XT 350 69105 $50.35

KAWASAKI

HONDASUZUKI

YAMAHA

Laser Cut Bike Rack App. ChartYear Model Rack MSRP2008-09 CRF 230L 7007 $45.601996-06 XR 400/250R 7006 $45.601992-09 XR 650L 7005 $45.60

Year Model Rack MSRP2000-08 DR-Z 400 Dual SportDR-Z 400 Dual Sport 7000 $45.602001-08 DR 650 Dual Sport 7001 $45.60

Year Model Rack MSRP2008-09 XT 250 7010 $45.60

HONDA

SUZUKIYAMAHA

MotorcyclesJ

MSRP $40.10

American Manufacturing | www.eagleplows.com��

Shop ToolsJ

#8090 RING COMPRESSORFits piston rings from 52mm to 85mm. Has adjustable compression leaving both hands free to handle the cylinder. A nice accessory for any shop.

#8080 CLUTCH SERVICE TOOLCompresses all driven clutches. Comes with keyed hold down post and will work on many drive clutches. New knock down design. Baked on powder coat finish..

#8078 CLUTCH SPRING TOOLCompresses your Ski-Doo TRA clutch when servicing. Can be bolted down to table to prevent sliding around while in use.

#9320 CLUTCH BUTTON RETAINER CLIPSA must when disassembling your Ski-Doo TRA clutch. Holds buttons in place during assembly and disassembly. ( sold in pack of 3 )

#8076 SHOCK SPRING COMPRESSORLever action shock service tool that makes spring compressing easy while one hand is free to remove spring retainer. Works on most snowmobile, motorcycle and ATV shocks that require spring compressor.

#8085 ATV BEAD BREAKERThis tool will break the bead on most 8”, 9”, 10” and 11” wheels. Its convenient size makes it easy to bring along on trips or at the track.

Motorcycles (cont.)J

#3340 54” BIKE BARStrap your bike in the back of you truck with confidence and security. The Bike Bar bolts to the front of your pickup box at any height and stops the front of your box from bowing. It has three tire groves and tie down loops for securing you bike in any one of the positions. Black powder coated and come with mounting hardware.

#3345 BIKE BAR EXTENSIONThe Bike Bar Extension bolts to the bike bar in any of the tree locations with hardware provided. The extension allows you to stagger one bike back 10” to off set the handle bars.

MSRP $24.40

MSRP $79.55

MSRP $76.05

MSRP $64.10MSRP $21.20

MSRP $101.60

MSRP $42.30

MSRP $26.10


#3445 SPRAY CAN HOLDER MSRP $ 28.60#3446 QUART HOLDER MSRP $ 26.75#3447 SPRAY AND QUART HOLDER MSRP $ 27.35Organize your shop or trailer with these custom holders. These holders fit most spray cans and quart sized oil containers.

Trailer AccessoriesJ

#3440 GAS CAN HOLDERSimple design. Practical use. Attaches to the wall of trailer or shop.Prevents costly, messy spills. Hoop size is 13” x 13”. Fits most gas cans.

#3448 SINGLE FLASH LIGHT HOLDER#3449 DUAL FLASH LIGHT HOLDERMounts easily to your shop or trailer wall. Single holder has one 1-5/8” opening and the dual has an 1-5/8” and a 3/4” opening. Flash lights rest in a rubber grommet.

#3450 SINGLE GALLON JUG HOLDER#3451 GALLON JUG HOLDERSIdeal for shop or trailer, keep antifreeze out of reach of children and pets. Opening measures 4 1/4” x 7 3/4” to fit most containers.

MSRP for 3448 $21.75MSRP for 3449 $27.65

MSRP for 3450 $24.60MSRP for 3451 $31.99

MSRP $31.30

#3442 SPARE TIRE CARRIERAttaches to trailer tongue and holds spare trailer tire. Hardware and instructions included.

MSRP $80.00

#4475 TREE STAND/BOW CASE CARRIERMADE IN THE USA.MADE IN THE USA. The carrier attaches to the existing rack of your ATV. Carry a tree stand OR bow case.tree stand OR bow case. Clamps are covered with cushioned rubber for protection of Clamps are covered with cushioned rubber for protection of your items and also to decrease noise.your items and also to decrease noise. Some ATV racks may require an adaptor kit, Some ATV racks may require an adaptor kit, check below.check below. MSRP $78.3078.30

#4674 COMPOSITE RACK MOUNTING BRACKETFor Polaris 2004 and older or plastic rack Kawasaki PrairieFor Polaris 2004 and older or plastic rack Kawasaki Prairie MSRP $22.6022.60

#4974 2005-08 POLARIS REAR RACK MOUNT BRACKET MSRP $40.9040.90

#4978 STEEL RACK ADAPTOR KIT (2-piece)For racks with no back rail or small rail.For racks with no back rail or small rail. MSRP $40.9040.90

#4741 GUN RACK WITH FIN GRIPSSlides onto your tree stand carrier (#4475) and allows you to carry a gun or other tool Slides onto your tree stand carrier (#4475) and allows you to carry a gun or other tool Slides onto your tree stand carrier (#4475) and allows you to carry a gun or other tool with grip in soft clip with non slip fins. Sold as a pair.with grip in soft clip with non slip fins. Sold as a pair. MSRP $40.9040.90

American Manufacturing1 Enterprise Ave.Isanti, MN 55040phone (763) 444-9225fax (763) 444-7890

®

www.eagleplows.com

American ManufacturingWarranty and Return Policy

For the period of one year from the original purchase date American Mfg. will replace for original purchaser, any part or parts, when found upon examination by American Mfg. to be defective in material, workmanship or both.

All transportation cost must be incurred by the purchaser in submitting the part to American Mfg. forreplacement under this warranty, if the product must be returned. If American Mfg. determines that the part is covered by warranty, American Mfg. will replace the part at no cost to the consumer if the part is not covered by warranty the part may be sent back or the customer may purchase a replacement.

The warranty does not apply to parts that have been damaged by accident, alteration, abuse, normal The warranty does not apply to parts that have been damaged by accident, alteration, abuse, normal wear non lubrication, or other causes beyond American Mfg. control. Please call American Mfg. if you have any warranty questions (763) 444-9225.

American Manufacturing pricing and product are subject to change at anytime do to manufacturing capabilities and product requirements.

ONE YEAR LIMITED WARRANTY

ATV UTV Snow Plow Tire Chain Catalog 2010

Sports

Transcript of ATV UTV Snow Plow Tire Chain Catalog 2010