Atmer 7373 - SpecialChem
Transcript of Atmer 7373 - SpecialChem
Effective anti-fog for polypropylene
Atmer 7373 is a unique anti-fog concentrate designed especially to deliver outstanding anti-fog performance in both hot and cold food packaging. Scientifically formulated for clear polypropylene films and containers, Atmer 7373 prevents droplet formation on plastic surfaces, keeping food looking fresher for longer.
AtmerTM 7373
For food with fresh appeal
Food contact approved
Croda Europe LtdTel +44 (0)1405 860551www.croda.com/[email protected]
At the heart of better plastics
Reasons to buy
No observable effect on hazeExcellent results in hot and
cold fogl
l
l
Atmer 7373 is a unique anti-fog concentrate designed to give excellent performance in polypropylene food packaging applications.
Polypropylene is extensively used in food packaging due to its excellent clarity and low temperature processing. In a crowded and ever competitive retail environment, food must look appealing to stand out from the competition. The unique formulation of Atmer 7373 effectively disperses water droplets on plastic surfaces, making food packaging clearer and giving food a fresh appeal.
Key benefits l Excellent hot and cold anti-fog performancel Food contact approvedl No observable effect on hazel Supplied as concentrate for easy dosing
Anti-fogging performanceAtmer 7373 gives outstanding results in both hot and cold fog applications. As a scientifically formulated 40% active concentrate, Atmer 7373 is recommended at addition levels of 2-5% to achieve optimum results.
Hot fog
Atmer 7373 has exceptional performance in hot fog applications. The data below clearly highlights that there is a dramatic improvement in anti-fog performance with the inclusion of Atmer 7373 when compared to blank polypropylene.
Cold fog
Atmer 7373 exhibits excellent performance in cold fog applications. The data below highlights that there is a significant improvement in anti-fog performance with the inclusion of Atmer 7373 when compared to blank polypropylene.
No observable difference in haze
Atmer 7373 showed no observable effect on the haze of the end product when compared to blank polypropylene.
Hot and cold fogging performancePolypropylene anti-fog additive
Non-warranty:The information in this publication is believed to be accurate and is given in good faith, but no representation or warranty as to its completeness or accuracy is made. Suggestions for uses or applications are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation or warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties of merchantability, fitness for a particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark and designs. Any trademarks identified herein are trademarks of the Croda group of companies. ©2012 Croda Europe Ltd 09/12 PAPF009/0
Figure 1: Comparative anti-fog performance of Atmer 7373 - hot fog test PP homopolymer film (50µm) 3.75% concentrate
*
*
Figure 2: Hot fog test - 50µm film tested at 60°C, time on test 10 minutes
Figure 4: Cold fog test - 50µm film tested at 4°C, time on test 10 minutes
Control Atmer 7373
Recommended applicationsl Salad and fruit display packaging
l Ready meal packaging
l Sandwich display packs
l Hot deli food packaging
Figure 3: Comparative anti-fog performance of Atmer 7373 - cold fog test PP homopolymer film (50µm) 3.75% concentrate
Control Atmer 7373
No Additive
No Additive
3.75% Atmer 7373
3.75% Atmer 7373
* Anti-fog rating scale
1-3 No anti-fogging performance
4-6 Moderate anti-fogging performance
7-9 Good anti-fogging performance