MANAGING TIME The obvious, the blindingly obvious and the, hopefully, helpful.
ATA operates without obvious causeATA operates without obvious cause Topic number LI80.50-P-061700...
4
06-29-2018 8:35 PM JCAMARE © Copyright Daimler AG Page 1/4 ATA operates without obvious cause Topic number LI80.50-P-061700 Version 6 Function group 80.50 Anti-theft alarm system (ATA), Interior motion sen- sor/Tow sensor Date 06-29-2018 Validity BR453 with SA code V19 Reason for change Part number changed Reason for block Complaint: ATA operates without obvious cause, particularly in windy conditions. Cause: The engine hood contact switch is not depressed sufficiently by the contact plate. Small deviations in the tolerance re- sult in inadvertent actuation of the ATA. Remedy: • Open service flap • Press rubber cap (picture 1) all the way onto sensor (picture 2) • Sensor with rubber cap (picture 3 and picture 4) Attachments File Description Rubber cap.jpg Rubber cap (picture 1) Hood switch.jpg Hood switch (picture 2) Hood switch with rubber cap.jpg Hood switch with rubber cap (picture 3) Hood switch with rubber cap in the vehicle.jpg Hood switch with rubber cap in vehicle (picture 4) Symptoms Overall vehicle / Safety and locking system / Antitheft alarm system ATA / Function / Inadvertent activation Parts Part number ES1 ES2 Designation Quantity Note EPC A 000 998 13 23 Bleed valve dust cap 1 X Operation numbers/damage codes
Transcript of ATA operates without obvious causeATA operates without obvious cause Topic number LI80.50-P-061700...
06-29-2018 8:35 PM JCAMARE© Copyright Daimler AG Page 1/4
ATA operates without obvious cause
Topic number LI80.50-P-061700
Version 6
Function group 80.50 Anti-theft alarm system (ATA), Interior motion sen-sor/Tow sensor
Date 06-29-2018
Validity BR453 with SA code V19
Reason for change Part number changed
Reason for block
Complaint:ATA operates without obvious cause, particularly in windy conditions.
Cause:The engine hood contact switch is not depressed sufficiently by the contact plate. Small deviations in the tolerance re-sult in inadvertent actuation of the ATA.
Remedy:• Open service flap• Press rubber cap (picture 1) all the way onto sensor (picture 2)• Sensor with rubber cap (picture 3 and picture 4)AttachmentsFile DescriptionRubber cap.jpg Rubber cap (picture 1)Hood switch.jpg Hood switch (picture 2)Hood switch with rubber cap.jpg Hood switch with rubber cap (picture 3)Hood switch with rubber cap in the vehicle.jpg Hood switch with rubber cap in vehicle (picture 4)
SymptomsOverall vehicle / Safety and locking system / Antitheft alarm system ATA / Function / Inadvertent activation
PartsPart number ES1 ES2 Designation Quantity Note EPCA 000 998 13 23 Bleed valve dust cap 1 X
Operation numbers/damage codes
06-29-2018 8:35 PM JCAMARE© Copyright Daimler AG Page 2/4
Op. no. Operation text Time Damagecode
Note
82394 51
AttachmentsRubber cap.jpg:
06-29-2018 8:35 PM JCAMARE© Copyright Daimler AG Page 3/4
Hood switch.jpg:
Hood switch with rubbercap.jpg:
06-29-2018 8:35 PM JCAMARE© Copyright Daimler AG Page 4/4
Hood switch with rubbercap in the vehicle.jpg:
