Assimilation Exam.xls

169169105:09:4004/18/2023document.xlsSheet2document.xls

TRIGGERMAN by: Reyen C. BuenavistaArchitect, UAP

HISTORY OF ARCHITECTURE

In Egyptian architecture, the tomb of the pharaohs is the.

The great pyramid at Gizeh was built during the 4th dynasty by.

The beginner of the great hypostyle hall at karnak and the founder of the 19th dynasty.

The mineral of greatest importance to Greek architecture of which Greece and her

domains had ample supply of was.

Greek architecture was essentially.

Forming the imposing entrance to the acropolis and erected by the architect Mnesicles

is the.

The building in the acropolis generally considered as being the most nearly perfect

building ever erected is the.

With the use of concrete made possible by pozzolan, a native natural cement, the

Romans achieved huge interiors with the.

Which of the order was added by the Romans to the orders used by the Greeks.

From the 5th century to the present, the character of Byzantine architecture is the

practice of using.

The finest and remaining example of Byzantine architecture.

The architectural character of the Romanesque architecture is.

Romanesque architecture in Italy is distinguished from that of the rest of Europe by the

use of what material for facing walls.



The most famous and perfect preservation of all ancient buildings in Rome.

The space between the colonnade and the naos wall in Greek temple.

Amphitheaters are used for ___.

An ancient Greek Portico, a long colonnaded shelter used in public places.

The fortified high area or citadel of an ancient Greek City.

An upright ornament at the eaves of a tile roof, concealing the foot of a row of convex

tiles that cover the joints of the flat tiles.

Strictly, a pedestal at the corners or peak of a roof to support an ornament, more usually,

the ornament itself.

Also called a 'Honeysuckle' ornament.

In ancient Greece and Rome, a storeroom of any kind, but especially for storing wine.

The characteristic of Greek ornament.

The use of ___ for facing walls distinguishes Romanesque architecture in Italy from that

of the rest of Europe.

The outstanding group of Romanesque is found in ___.

The dining hall in a monastery, a convent, or a college.

The architecture of the curved line is known as ___.

The open court in an Italian palazzo.

The ornamental pattern work in stone, filling the upper part of a Gothic window.

Japanese tea house.

A Muslim temple, a mosque for public worship, also known as place for prostration.



Domical mound containing a relic.

Ifugao house (southern strain).

In Mesopotamian architecture, religion called for temples made of sun-dried bricks.

The style of the order with massive and tapering columns resting on a base of 3 steps.

Tomb of the pharaohs.

Earthen burial mounds containing upright and lintel stones forming chambers for

consecutive burials for several to a hundred persons.

A semi-circular or semi-polygonal space, usually in church, terminating in axis and

intended to house an altar.

Temples in Greece that have a double line of columns surrounding the naos.

Senate house for chief dignitaries in Greek architecture

Architect of the Einstein Tower.

Founder of the Bauhaus School of Art.

What architectural term is termed to be free from any historical style?

From what architecture is the Angkor Vat?

The architect of Chrysler building in N.Y.

Another term for crenel or intervals between merlon of a battlement.

Taj Mahal temple is located in ___.

In the middle kingdom, in Egyptian architecture, who consolidate the administrative

system, made a survey of the country, set boundaries to the provinces, and other helpful

works.



Who erected the earliest known obelisk at Heliopolis.

Jubilee festivals of the pharaohs.

The world's first large-scale monument in stone.

The highest sloped pyramid in Gizeh

A vault created when two barrel vaults intersect at the right angles.

Sarimanok is a décor reflecting the culture of the ___.

Caryatid porch is from what architecture?

Female statues with baskets serving as columns.

A small tower usually corbelled at the corner of the castle.

A hall built in Roman Empire for the administration of justice.

The Parthenon is from what architecture.

A roof in which 4 faces rests diagonally between the gables and converge at the roof.

A compound bracket or capital in Japanese architecture.

A concave molding approximately quarter round.

Architect of Iglesia ni Cristo.

A Filipino architect whose philosophy is 'the structure must be well oriented'.

What is not required as a feature in modern Muslim mosque.

Architect of Robinson's Galleria

Major contribution of the Renaissance Architecture.

A house is like a flower pot

Richly carved coffins of Greece and Mesopotamia.



King Zoser's architect who was deified in the 26th dynasty.

The council house in Greece.

Elizabethan Architecture is from what architecture.

Art Noveau style first appeared in what structure.

A faced without columns or pilaster in renaissance architecture.

Art Noveau is known as the international style, in Germany it is known as ___.

Less is more.

First school which offered architecture in the Philippines.

Embrasures.

Formal architecture, one of the principles of composition.

Different historical styles combined.

Architect of TWA airport.

The falling water by Frank Lloyd Wright is also known as ___.

First president and founder of PAS.

Modern architecture need not be western.

Architect of the national library, Philippines.

The xerxes hall of hundred columns was introduced during the Mesopotamian

architecture, which palace was it used.

Taj Mahal is a building example of what architecture.

The convex projecting molding of eccentric curve supporting the abacus of a Doric capital.

Pantiles used for Chinese roofings.



Greek equivalent of the Roman forum, a place of open air assembly or market.

A slight vertical curvature in the shaft of a column.

The very ornate style of architecture developed in the later renaissance period.

A multi-storied shrine like towers, originally a Buddhist monument of diminishing size with

corbelled cornice and moldings.

cubicula or bedroom is from what architecture.

From the Greek forms of temple, the three steps where it lies is known as ___.

From the Greek temples, a temple that have porticoes of columns at the front and rear.

Memorial monuments of persons buried elsewhere in Roman architecture.

The three pyramids in Gizeh

The cistern storage of collected rainwater underneath the azotea of the bahay na bato.

A shallow cistern or drain area in the center of a house.

In Greek temples, the equivalent of the crypt is the ___.

The tomb beneath a church.

A raised stage reserved for the clergy in early Christian churches.

A decorative bracket usually taking the form of a cyma reversa strap.

Semi-palatial house surrounded by an open site.

A roman house with a central patio.

Revival of classical Roman style



The style emerging in western Europe in the early 11th century, based on Roman and

Byzantine elements, characterized by massive articulated wall structures, round arches,

and powerful vaults, and lasting until the advent of Gothic architecture.

Architect and furniture designer.

First registered architect in the Philippines.

The public square of imperial Rome.

Architect of Manila Hilton Hotel.

Finest example of French-Gothic architecture

How many stained glass are there in the Chartres Cathedral?

Agora is from what architecture?

Sacred artificial mountains of Babylon and Assyria.

A plant whose leaves form the lower portions of the Corinthian capital.

Structure of wedge-shaped blocks over an opening.

The space between the sloping roof over the aisle and the aisle vaulting, so also called

a blind story.

A windowed wall that rises above the roof of adjacent walls that admit light into the

interior.

A standard, usually of length, by which the proportions of a building are determined.

The triangular or segmental space enclosed by a pediment or arch.

A line of counterthrusting arches on columns or piers.

In the classical order, the lowest part or member of the entablature; the beam that spans



from column to column.

In classical architecture, the elaborated beam member carried by the columns.

Parts of an entablature, in order from top to bottom.

Plan shape of a Chinese pagoda.

Usual number of stories for a Chinese pagoda.

A special feature of Japanese houses, used to display a flower arrangement or art.

Plan shape of a Japanese pagoda.

The most famous structure of Byzantine architecture and notable of its large dome.

Triangular piece of wall above the entablature.

A spherical triangle forming the transition from the circular plan of a dome to the poly-

gonal plan of its supporting structure.

A long arcaded entrance porch in an early Christian church.

The principal or central part of a church, extending from the narthex to the choir or

chancel and usually flanked by aisles.

The covered walk of an atrium.

A basin for ritual cleansing with water in the atrium of an early Christian basilica.

A large apsidal extension of the interior volume of a church.

An ornamental canopy of stone or marble permanently place over the altar in a church.

A decorative niche often topped with a canopy and housing a statue.



A recess in a wall to contain a statue or other small items.

A tower in the Muslim Mosque used to call people to prayer.

Coffers, sunken panels in the ceiling.

The Buddhist temple in ancient Cambodia which feature four faces of the compassionate

Buddha.

A term given to the mixture of Christian, Spanish, and Muslim 12th-16th century

architecture.

Projecting blocks of stone carved with foliage, typical in Gothic architecture.

A slab forming the crowning member of the capital.

The crowning member of a column.

A rectangular or square slab supporting the column at the base.

A low screen wall enclosing the choir in early Christian church.

The cold section of a Roman Bath.

This church in the Philippines is the seat of the Malolos Congress.

The palace proper in Assyrian palaces.

Holy mountains.

Architect of the famous propylaea, Acropolis.

Private family apartments in Assyrian palaces.

The most stupendous and impressive of the rock-cut-temples.

The four-seated colossal statues of Rameses II is carved in the pylon of the ___.

Favorite motifs of design of the Egyptians.



Two main classes of temples in Egyptian Architecture.

Egyptian temples for ministrations to deified pharaohs.

Structure whose corners are made to face the four cardinal points.

Structure whose sides are made to face the four cardinal points.

Egyptian temples for the popular worship of the ancient and the mysterious gods.

The use of monsters in doorways is prevalent in what architecture?

The Greek male statues used as columns.

A recessed or alcove with raised seats where disputes took place.

A single line of columns surrounding the Naos.

The uppermost step in the crepidoma.

The lowest step in the crepidoma.

A building in Greek and Roman for exercises or physical activities.

The three chamber of a Greek temple.

A Greek building that contains painted pictures.

Temple with a portico of columns arranged in front.

The clear space in between columns.

Intercolumniation of 2.25 diameters.

Intercolumniation of 4 diameters.

Intercolumniation of 2 diameters.

Pycnostyle intercolumniation has how many diameters?

Diastyle intercolumniation has how many diameters.



A kindred type to the theater.

Roman building which is a prototype of the hippodrome of the Greek.

Roman building for which gladiatorial battles took place.

What sporting event takes place in the Palaestra?

A foot race course in the cities.

A temple with 1-4 columns arranged between antae at the front.

A temple with 1-4 columns arranged between antae at the front and rear.

In Greek, it is the Roman prototype of the Thermae.

Greek order that has no base.

The most beautiful and best preserved of the Greek theaters.

What orders did the Etruscans and the Romans add making 5 in all?

What allowed the Romans to build vaults of a magnitude never equaled till the birth of

steel for buildings.

The finest of all illustrations of Roman construction.

The oldest and most important forum in Rome.

Who commenced the 'hall of hundred columns'?

Who completed the 'hall of hundred columns'?

Architects of the Parthenon.

Master sculptor of the Parthenon.

In Roman fountains, the large basin of water.

Spouting jets in Roman fountain.



The oldest circus in Rome.

The colosseum in Rome also known as the "flavian amphitheater" was commenced by

whom and completed by whom?

Architect of the Erechtheion.

A water clock or an instrument for measuring time by the use of water.

The finest of Greek Tombs, also known as the 'tomb of Agamemnon'.

Architect of the Temple of Zeus, Agrigentum

Architect of the Temples of Zeus, Olympia.

Roman architect of the Greek Temples of Zeus, Olympius.

Both the regula and the mutule has guttae numbering a total of ___.

A quadrigas is a ___.

The water-leaf and tongue is a usual ornament found in the ___.

The Corona is usually painted with the ___.

Greek sculptures may be classified as "architectural sculpture, free standing statuary,

and the ___".

One of the best examples of a surviving megaron type of Greek domestic building.

The molding that is often found in the Doric Order.

The wall or colonnade enclosing the Temenos

The private house of the Romans.

Roman rectangular temples stood on a ___.

Roman large square tiles.



A type of Roman wall facing with alternating courses of brickworks.

A type of Roman wall facing which is made of small stone laid in a loose pattern roughly

resembling polygonal work.

A type of Roman wall facing with a net-like effect.

A type of roman wall facing with rectangular block with or without mortar joints.

A Roman structure used as hall of justice and commercial exchanges.

A type of monument erected to support a tripod, as a prize for athletic exercises or

musical competitions in Greek festivals.

A type of ornament in classic or renaissance architecture consisting of an assemblage

of straight lines intersecting at right angles, and of various patterns.

Figures of which the upper parts alone are carved, the rest running into a parallelopiped

or diminishing pedestal.

Marble mosaic pattern used on ceilings of vaults and domes.

Conceptualized the Corinthian capital.

The sleeping room of the 'megaron'.

The origin of the door architrave.

The atrium type of house originated with the ___.

Roman apartment blocks.

A building in classic architecture decorated with flowers and plants with water for the

purpose of relaxation.

!5th to 18th century architecture.



Form follows function.

The dominating personality who became an ardent disciple of the Italian renaissance

style.

A pillared hall in which the roofs rests on the column in Egyptian temples.

Who began the building of the Great Hypostyle Hall at Karnak?

Architect of the Great Serapeum at Alexandria.

He created the Dymaxion House, "the first machine for living".

Tombs built for the Egyptian nobility rather than the royalty.

Architect of the Lung Center of the Philippines.

The warm room in the Thermae.

The Hot room of the Thermae.

The cold or unheated pool in the Thermae.

The dry or sweating room in the Thermae.

The dressing room of the Thermae.

The room for oils and unguents in the thermae.

Orientation of the Roman temple is towards the ___.

Orientation of the Greek temple is towards the ___.

Orientation of the Etruscan temple is towards the ___.

Orientation of the Medieval Church.

The space for the clergy and choir is separated by a low screen wall from the body of the

church called ___.



On either side of the choir, pulpits for the reading of the epistle and the gospel are

called.

In some churches, there is a part which is raised as part of the sanctuary which later

developed into the transept, this is the ___.

In early Christian churches, the bishop took the central place at the end of the church

called ___.

The iconoclastic movement during the Byzantine period forbade the use of ___.

Type of plan of the Byzantine churches.

Architects of the Hagia Sophia. (St. Sophia, Constantinople)

The supreme monument of Byzantine architecture.

Smallest cathedral in the world. (Byzantine period)

One of the few churches of its type to have survived having a square nave and without

cross-arms, roofed by a dome which spans to the outer walls of the building.

A tower raised above a roof pierced to admit light.

the covered passage around an open space or garth, connecting the church to the chapter

house, refectory and other parts of the monastery.

The prominent feature of the facades in Romanesque Central Italy.

The best example of a German Romanesque church with apses at both east and west

ends.

The term applied to the Episcopal church of the diocese and also the important structure

of the Gothic period.



The first plan shape of the St. Peter's Basilica by Bramante.

The final plan shape of the St. Peter's Basilica by Carlo Maderna.

He erected the entrance Piazza at St. Peter's Basilica.

Used as food storage in the Bahay na Bato.

The granary in traditional Bontoc House.

Architect of the World Trade Center.

The Erechtheion of Mnesicles is from what architecture?

The part of the Corinthian capital without flower.

The Pantheon is from what architecture.

The architect of the Pantheon.

The senate house of the Greeks.

Architect of the Bi-Nuclear House, the H-Plan.

Mexican Architect/Engineer who introduced thin shell construction.

In the Doric Order, the shaft terminates in the ___.

In what Order is the Parthenon.

In what Order is the temple of Nike Apteros, Athens.

This temple is dedicated to 'Wingless Victory'.

This structure in Greece was erected by Andronikos Cyrrhestes for measuring time by

means of a clepsydra internally and sun dial externally.

In the Cyma Reversa molding of the Romans, what ornaments are usually found?

From what architecture is the Stoa?



The Egyptian Ornament symbolizing fertility.

Egyptian Temple for popular worship of the ancient and mysterious gods.

A small private bath found in Roman houses or palaces.

Corresponds to the Greek naos.

The large element in the frieze.

A house is a machine to live in.

Architect of the Chicago Tribune Tower.

Architecture is Organic.

Invented reinforced concrete in France.

First elected U.A.P. president.

Designer of the Bonifacio Monument.

Sculptor for the Bonifacio Monument.

Designer of the Taj Mahal.

Male counterpart of the Caryatids.

Like Caryatids and Atlantes, this is a three-quarter length figures.

This is a pedestal with human, animal, or mythological creatures at the top.

A small payer house in Egyptian architecture.

Where "Constructivism" originated?

Expressionist Architect.

Founders of the "Art Noveau".

Combination of the new art and the graphing of the old art.



Return in the use of Roman Orders in modern age.

Scheme or solution of a problem in architecture.

Architect of the Batasang Pambansa.

Architect of the Philippine Heart Center.

Architect of the Rizal Memorial Stadium.

The architect of the Quiapo Church before its restoration.

Built by the Franciscan priest Fr. Blas dela Madre, this church in Rizal whose design

depicts the heavy influence of Spanish Baroque, was declared a national treasure.

This church, 1st built by the Augustinian Fr. Miguel Murguia, has an unusually large bell

which was made from approximately 70 sacks of coins donated by the towns people.

Architect of SM Megamall.

Central Bank of the Philippines, Manila.

G.S.I.S. Building, Roxas Boulevard.

The tower atop the torogan where the princess and her ladies in waiting hide during

occasions.

Found in the ground floor of the bahay na bato, it is where the carriages and floats are

kept.

The emergency hideout found directly behind the neadboard of the Sultan's bed.

The flat, open terrace open to the toilet, bath, and kitchen areas and also used as a

laundry and drying space and service area for the servants.

In the kitchen of the bahay kubo, the table on top of which is the river stone, shoe-shaped



stove or kalan is known as ___.

ARCHITECTURAL PLANNING

A wide area of parks of undeveloped land surrounding a community.

The process in which a piece of land, referred to as the parent tract, is subdivided into

two or more parcels.

Angles measured clockwise from any meridian, usually north; however, the National

Geodetic Survey uses south.

Usually the last stage of the final site development process prior to issuance of building

permit.

A 20th century problem emanating from rapid urbanization of areas surrounding a city

which eats up the remaining adjacent rural open spaces.

A type of planning which emphasizes that the proper role of the planner is not to serve

the general public interest but rather to serve the interests of the least fortunate or least

well represented groups in society.

In the Philippines, this type of land use planning emphasizes the proper management of

land resources to ensure that the present generation can benefit from its continued use

without compromising future generations.

This code mandates that all Local Government Units shall prepare their comprehensive



land use plans and enact them through zoning ordinances.

Reason for planning.

Phrase used to characterize development that meets the needs of the present

generation without compromising the needs of the future generations.

First Planner and developed the Gridiron.

A locale with a sizeable agglomeration of people having characteristics of an urban being.

The main reason why the nomadic existence of early man metamorphosed to village

settlement and later to the birth of cities.

The rough equivalent of the present tenement cities that existed in ancient Rome, which

resulted from the population growth of the city and the congestion that existed in streets.

In urban geography, a concept where urban settlement is confined to the area within the

legal limits of the city and the congestion and virtually all of this area is occupied by

urban residents.

A Land Development Decision is also what kind of decision.

The orderly arrangement of urban streets and public spaces.

He conceptualized the 'City Beautiful Movement'.

A tool used to control the manner in which raw kind is subdivided and placed on the

marker for residential development.

A profession which falls between planning and architecture. It deals with the large-scale

organization and design of the city, with the massing and organization and the space

between them, but not with the design of the individual buildings.



The science of human settlement.

By definition, settlement inhabited by man.

Planning for roads, bridges, schools, parking structures, pubic buildings, water supply,

and waste disposal facilities.

The container of man, which consists of both the natural and man-made or artificial

element.

A spatial organization concept a general view of the pattern of land use in a city

developed by Ernest W. Burgess. The city is conceived as a series of five concentric

zones with the cores as the central business district and fanning out from which are the

residential and commuter zones.

The remaining space in a lot after deducting the required minimum open spaces.

A habitable room for 1 family only with facilities for living, sleeping, cooking, and eating.

This is a type of a retaining wall made of rectangular baskets made of galvanized steel

wire or pvc coated wire hexagonal mesh which are filled with stones to form a wall.

A very steep slope of rock or clay.

A piece of grassy land, especially one used for growing hay or as pasture for grazing

animals; low grassy land near a river or stream.

A long, narrow chain of hills or mountains.

A long, deep, narrow valley eroded by running water.

On land, an encumbrance limiting its use, usually imposed for community or mutual

protection.



Of land, a contiguous land area which is considered as a unit, which is subject to a

single ownership, and which is legally recorded as a single piece.

A wall that serves 2 dwelling units, known also as party wall.

Niemeyer believed that relating large areas to each other is freedom as in the planned

city of___.

In architectural terms, it is the relationship of the number of residential structures and

people to a given amount of space.

The government arm responsible for the development and implementation of low cost

housing in the Philippines.

Housing provided for low-income groups generally through government intervention and

characterized by substantial subsidies and direct assistance.

A written agreement between parties, but it allows a specific period during which the

buyer can investigate the property and make a decision.

Sometimes called "subscription money", this is a deposit given to the seller to show that

the potential buyer has serious intentions.

A provision made in advance for the gradual liquidation of a future obligation by periodic

charges against the capital account.

Written document to transfer the property to one person to another.

They develop or improve the land as well as construct houses.

Determines the value of the house and also is familiar with trends in the local market and

in the industry.



Helps people find a place to live, specializing and matching wants of buyers with the

local supply.

Are usually large concrete slabs or otherwise panelized units fabricated in a shop and

assembled at the site.

Codes that deal with the use, occupancy, and maintenance of existing buildings.

Designed to regulate land use, to ban industry and commerce from residential areas and

to separate different types of living units.

Construct three-dimensional volumetric units in a plant on a production line then hauled

to the site.

System building is the complete integration of all ___.

The improvement of slum, deteriorated, and underutilized areas of a city.

An area which is within the city limits, or closely linked to it by common use of public

utilities and services.

Two major hindrances to the prefabrication industry.

Three general types of structures.

A piece of land with an economic use for farming.

Lands for well-being like parks, plazas, and of similar nature.

Similarly as the cost of the land, neighborhood character have this effect.



Minimum road width in a neighborhood development to ease traffic flow.

Which building component receives priority over the location to have the morning sun.

Urban Planning is defined briefly as the guidance of ___.

A lattice structure that serves as a summer house.

In landscaping, ground cover is represented by ___.

The art of arranging buildings and other structures in harmony with the landscape.

The study of the dynamic relationship between a community of organisms and its habitat.

Preparations of an accurate base map for urban planning starts with ___.

Appraisal of adequacy of a city's water and sewer systems needs of future land uses are

embodied in the ___.

Also called the blood-stream of a city.

A form of absence of all the principles and organized development of a community.

The city of Washington conforms to the plan type of ___.

An efficient and rapid transport system for automobiles to circulate across urban to urban

areas.

A monument, fixed object, or marker used to designate the location of a land boundary on

the ground.

A narrow passageway bordered by trees, fences, or other lateral barrier

The projection of a future pattern of use within an area, as determined by development

goals.

The part of the surface of the earth not permanently covered by water.



A line of demarcation between adjoining parcels of land.

A survey of landed property establishing or reestablishing lengths and directions of

boundary line.

The study of an existing pattern of use, within an area, to determine the nature and

magnitude of deficiencies which might exist and to assess the potential of the pattern

relative to development goals.

A study and recording of the way in which land is being used in an area.

In surveying, the North-South component of a traverse course.

An open space of ground of some size, covered with grass and kept smoothly mown.

A contract transferring the right of possession of buildings, property, etc., for a fixed

period of time, usually for periodical compensation called 'rent'.

A tenure by lease; real estate held under a lease.

BUILDING UTILITIES

The amount of heat which is absorbed or evolved in changing the state of a substance

without changing its temperature.

A system of devices, usually installed below ground level, to scatter or spray water



droplets over a lawn, golf course, or the like.

Minimum width of a septic tank.

Minimum length of a septic tank.

Minimum liquid depth for a septic tank.

Maximum liquid depth for septic tank.

Minimum capacity, in cubic meters, of the secondary compartment of a septic tank.

Minimum dimension of a manhole access to a septic tank.

Minimum length of the secondary compartment of a septic tank with a capacity of more

than 6 cubic meters.

Wooden septic tanks are allowed, true or false.

Minimum distance of a water supply well from a septic tank.

Minimum distance of a water supply well from a seepage pit or cesspool.

Minimum distance of a water supply well from a disposal field.

Minimum Gauge of galvanized sheet used for downspouts.

Minimum height of a water seal for each fixture trap.

Maximum height of a water seal for each fixture trap.

Maximum length of the tailpiece from any fixture.

Minimum extension of the VSTR above the roof.

Minimum extension of the VSTR above an openable window, door opening, air intake,

or vent shaft.

Minimum trap diameter for a bathtub



Minimum trap diameter for a shower stall.

Required number of water closets for females for an auditorium serving 16-35.

Required number of water closets for males for an auditorium serving 16-35.

Required number of urinals for an auditorium serving 10-50.

Required number of water closets for females for a theater serving 51-100.

Classifications of copper pipes.

A rough or sharp edge left on metal by a cutting tool.

Two types of passenger elevator.

Minimum elevator width of single slide door elevator for small commercial or residential

building.

A device that is basically a double throw switch of generally 3-pole connection that will

automatically transfer the power from the standby generator to the building circuitry

during electrical power failure.

TW in electrical wire specification means.

Another name for passenger elevator.

The minimum face to face distance between elevators in three and four car grouping.

Collection line of a plumbing system is sometimes referred to as.

Maximum height of a dumbwaiter.

A type of lighting that provides illumination to special objects like sculptures, flower



arrangements, etc.

XHHN in wire specification means.

Standard length of an electrical metal conduit.

An assembly consisting of a pulley wheel, side plates, shaft, and bearings over which a

cable or roped is passed.

The other type of flame detector other than the ultraviolet type.

PABX or PBX means.

Farad is the unit capacity of a ___.

Another name for distribution panel.

Type of plastic pipe other than polyvinyl chloride and polybutylene.

Standard size of wire for a circuit line.

Standard size of wire for a switch line.

A device for converting alternating current to direct current.

Another name for a Rectifier.

A controller sensitive to the degree of moisture in the air.

Another name for Humidistat.

Consist of a flyball or flyweight device designed to stop an elevator.

A stop valve placed in the service pipe close to the connection at the water main.

A vent with a function to provide circulation if air between drainage and vent system.

Flange used on a pipe to cover a hole or opening in a floor or wall which the pipe pass.



Length along the centerline of the pipe and fitting.

A valve used in a flush tank controlling the flushing of fixture.

Any liquid waste containing animal or vegetable matter in suspension or solution.

Component of fire extinguisher.

Interrelationship between value of voltage and current with the same frequency.

Descriptive of any material such as synthetic resin which hardens when heated or cured,

and does not soften when reheated.

An Instrument which responds to changes in temperature, and directly or indirectly

controls temperature.

Thin sheets that are used for controlling heat in drywall construction.

Conveys storm water and terminates into a natural drainage such as lakes or rivers.

A machine that converts mechanical energy into electrical energy, a generator of

alternating current.

Freon in air-con must be compressed and liquefied in order to absorb ___.

Standard size of a wet standpipe outlet for each floor.

A type of pipe fitting for a Yoke Vent.

A device installed on an electric water heater used to detect the working temperature

to activate a switch.

Minimum size of trap or branch for a bidet.

Minimum fixture supply pipe diameter for tank type water closet.

True or false, 1 3/4" diameter is 'not' a commercial size of G.I. Pipe for water supply.



True or false, 3" diameter is 'not' a commercial size of G.I. Pipe for water supply.

Term applied to the interconnection of the same fixtures in one soil or waste branch with

one branch vent.

A single vent that ventilates multiple traps in the case of a back to back vent.

Minimum size of a standpipe for a building in which the highest outlet is 23 meters or less

from the fire service connection.

Minimum size of a wet standpipe for a riser of more than 15 meters from the source.

Single lever valves used in kitchen sink and lavatory faucets or at shower valves works by

the principle of a ___.

Treats hard water.

Minimum height of a branch vent above the fixture it is venting.

Minimum wire size in square millimeter for a branch circuit with a 30 ampere rating using

Type THW stranded copper conductor in a raceway.

Standard frequency of power supplied by the local power utility company like Meralco.

The overhead service conductors from the last pole or other aerial support to and including

splices, if any, connecting to the service entrance conductors at the building.

Unit of loudness level.

The process of dissipating sound energy by converting it to heat.

Distance sound travels during each cycle of vibration.

The reduction in the intensity or in the sound pressure level of sound which is transmitted



from one point to another.

Unit of sound absorption equivalent to 1 square foot of perfectly absorptive material.

Acoustical phenomenon which causes sound wave to be bent or scattered around.

Minimum sound pressure level that is capable of being detected by the human ear.

Fluctuation in pressure, a particle displacement in an elastic medium.

Sound sensation in a single frequency.

Wave produced by a pure tone.

Synonymous with a lighting fixture.

The luminous intensity of light is expressed in ___.

It refers to an individual who worked in the sanitary field of ancient Rome.

In Latin, it means 'lead'.

A specially designed system of waste piping embodying the horizontal wet venting of one

or more sinks or floor drains by means of a common waste and vent pipe adequately

sized to provide free movement of air above the flow line of the drain.

Vertical flow of air used to separate different functions of spaces.

Type of lighting dealing with relatively large area lighting.

During elevator emergency, to rescue passengers, this part of the elevator is used to open

the doors from the outside.

A device which extends across at least 1/2 the width of each door leaf which will open if

subjected to pressure.

Sanitary sewage from buildings shall be discharged directly to the nearest ___.



Receptacles intended to receive and discharge water, water-carried waste into a drainage

system with which they are connected.

The simplest type of building automation system.

Standard size of an outlet for a dry standpipe located at each floor.

A vent pipe connected to a vent stack.

A vent pipe connected to a stack vent.

Instrument used for measuring atmospheric pressure.

Bets type of fire detection that can detect fire during the incipient stage.

Condensing unit is a part of a ___.

A fire detector installed in a fire alarm system which uses low melting point solders or

metal that expands when exposed to heat to detect a fire.

A faucet fitted with a nozzle curving downward used as a draw-off tap.

Heat rating for a fixed temperature heat detector.

Reference in measuring the depth of a trap seal of a trap.

A pipe fitting shaped like 'S'.

Minimum size of trap and waste branch for a shower stall.

Minimum size of trap and waste branch for a pedestal urinal.

Ratio of water closets for male population for elementary and secondary school.

Ratio of water closets for female population for elementary and secondary school.

Ratio of urinals for elementary school.

Ratio of water closets for female population for Principal Worship Places.



Minimum required number of water closets for female for office and public buildings

serving 55 occupants for employees.

Where there is exposure to skin contamination due to poisonous materials, what is the

ratio of lavatory to number of occupants.

Minimum head of water, in meters, required for each section of plumbing for water test.

How many days, at least, shall be given before any plumbing work inspection is done

after written notice for inspection.

Minimum time, in minutes, required for water to stay in the system or pipes for a water

test without any leaks to satisfy said testing.

Consist of a body, a checking member, and an atmospheric opening.

Minimum lead content in percent for pipes and fittings safe for humans.

Minimum vertical distance from the bottom of water pipes to the top of sewer or drain pipe

if laid in the same trench on top of the other.

Minimum distance of water pipings from any regulating equipment, water heater,

conditioning tanks, and similar equipment requiring union fittings.

Maximum spacing of pipe supports at intervals.

Equivalent of 1/6 bend in degrees.

True or false, 60˚ branches or offsets may be used only when installed in a true vertical

position.

Cleanouts may be omitted on a horizontal drain less than 1.5 meters in length unless

such line is serving sinks or urinals, true or false.



Minimum clearance in front of any cleanout in meters for pipes 51mm or less in diameter.

Minimum clearance in front of any cleanout in meters for pipes larger than 51 mm. Dia.

Maximum distance of any underfloor cleanout from any access door, crawl space, or

crawl hole.

Maximum length of a tailpiece.

Minimum length of any branch requiring separate venting.

True or false, no galvanized wrought iron or galvanized steel pipe shall be used

underground and shall be kept at least 15 cms above ground.

Minimum extension of a vent stack through roof above the roof.

Minimum extension of a vent stack through roof above any other vertical surface.

Minimum vertical distance of VSTR from above of any openable window or opening.

Minimum vertical extension of VSTR from any roofdeck where it is protruded.

Minimum horizontal distance of any VSTR from a roofdeck used for other purposes aside

from protection from weather.

Minimum number of stories served by a waste stack requiring a parallel ventstack.

The rate of flow of light through a surface.

The luminous intensity of any surface in a given direction per unit of projected area.

A unit of illumination equivalent to 1 lumen per square foot.

A unit of illumination equivalent to 1 lumen per square meter.

Type of lighting system where 90-100% of light output is directed to the ceiling and upper

walls of the room.



The material used for filament in an incandescent bulb.

The equivalent of filament in a fluorescent lamp.

An automatic device used for converting high, fluctuating inlet water pressure to a lower

constant pressure.

An air-operated device used to open or close a damper or valve.

In theater stage house, a weight usually of iron or sand used to balance suspended

scenery, or the like.

On elevators, a gear-driven machine having a drum to which the wire ropes that hoist the

car are fastened, and on which they wind.

Vertical tracks that serves as a guide for the car and the counterweight.

Under NBC, the clearance between the underside of the car and the bottom of the pit

shall not be less than ___.

Under NBC, the minimum diameter of hoisting and counterweight rope.

Under NBC, the minimum width between balusters in an escalator.

Under NBC, the maximum rated speed of an escalator along the angle of travel.

The effective room temperature in air-conditioning.

A private telephone system that interconnects with public telephone systems.

Resistance in alternating current system.

The reciprocal of conductance.

The rate of flow of sound energy

Lighting used primarily to draw attention to particular points of interest.



A means of producing light from gaseous discharge.

A type of High-Intensity-Discharge lamp (HID).

Sound system input device that reacts to and converts variable sound pressure into

variable electrical current.

A rate of rise type detector.

Light originating from sources not facing each other, as from windows in adjacent walls.

The process of removing calcium and magnesium deposits in water.

A lighting unit consisting of one or more electrical lamps.

A louvered construction divided into cell-like areas and used for redirecting the light

emitted by an overhead source.

A graph used in air-conditioning and showing the properties of air-system mixtures.

Heat that raises air temperature.

The transmission of heat energy from one place to another by circulatory movement of a

mass of fluid.

A lamp designed to project and diffuse a uniform level of illumination over a large area.

In boilers, they function only when exceeds prescribed unsafe operating conditions.

What type of sound absorbent is best for lower band frequencies.

The bending of sound wave when traveling forward changes direction as it passes through

different densities.

True or false, number of fixture unit is one parameter in sizing a drainage pipe.

Water distribution system which constantly rely its pressure from the main water pipe



applied only if the highest fixture is supplied continuously with the flow rate and minimum

required working pressure.

What combination of pipe fittings is installed at the base of a soil stack?

What is the rating index of an air-conditioning/refrigeration system which rates the unit for

the number of BTU's of heat removed per watt of electrical input energy?

What mechanical equipment, coupled with a central air-conditioning system, is used to

to dehumidify and cool the air stream injected to a conditioned space.

A rigid metal housing for a group of heavy conductors insulated from each other and the

enclosure, also called Busduct.

A heavy conductor, usually in the form of a solid copper bar, used for collecting, carrying,

and distributing large electric currents, also called a busbar.

An approved assembly of insulated conductors with fitting and conductor terminations in

completely enclosed ventilated protective metal housing where the assembly is designed

to carry fault current and to withstand the magnetic forces of such current.

A type of perimeter detector which detects object in heat range of body temperature.

A type of perimeter detector which detects interruption of light beam.

A type of perimeter detector which detects change in sound wave pattern.

Women's urinal fixture.

True or false, brass and cast iron body cleanouts shall not be used as a reducer or

adapter.



A box with a blank cover which serves the purpose of joining one different runs of

raceways or cables and provided with sufficient space for connection and branching of the

enclosed conductors.

A type of water closet that is least efficient, subject to clogging, noisy, and use a simple

washout action through a small irregular passageway.

This type of water closet is similar to that of the siphon-jet except that it has a smaller

trap passageway and smaller water surface area, moderately noisy.

A type of water closet that is noisy but highly efficient. Strong jet into up leg forces

contents out. Use only with flush valve, requires higher pressure.

Water closet that is quiet, extremely sanitary, water is directed through the rim. It scours

bowl, folds over into jet; siphon.

A water closet that is sanitary, efficient, and very quiet. Water enters through the rim and

through the down leg.

A toilet bowl similar to the siphon-jet, but having the flushing water directed to the rim to

create circular motion or vortex which scours the bowl.

A toilet bowl in which the flushing water enters through the rim and a siphonic action

initiated by a water jet draws the contents of the bowl through the trapway.

A water closet similar to that of the siphon jet but with a smaller water surface and

trapway.

This type of water closet is prohibited by some health codes.

The concussion and banging noise that results when a volume of water moving in a pipe



suddenly stops or loses momentum.

The length of a pipeline measured along the centerline of the pipe and pipe fittings.

A shutoff valve closed by lowering a wedge-shaped gate across the passage.

A valve closed by a disk seating on an opening in an internal wall.

Liquid sewage that has been treated in a septic tank or sewage treatment plant.

The centerline of pipe.

The interior top surface of a pipe.

The interior bottom surface of a pipe.

A type of perimeter detector which is subject to false alarm from aircraft radar and from

movement outside building through window, wood doors, and the like. It uses radio waves.

This type of perimeter detector uses both the Passive infrared and Ultrasonic or

Microwave system.

This type of perimeter detector detects a change in capacitance of the area covered,

caused by intrusion.

Color code for pipes containing acid.

A high intensity discharge lamp in which the light is produced by the radiation from a

mixture of a metallic vapor, similar to that of a mercury lamp in construction.

A type of lamp popular for lighting commercial interiors, uses argon gas to ease starting,

it produces light by means of an electric discharge in mercury vapor.

A type of lamp which produces light by means of the reaction of halogen additive in the

bulb reacts with chemically with tungsten.



A type of lamp generally used for roadways and sidewalks, uses sodium gas.

Building with fire alarm and suppression system.

This shows the vertical relationships of all panels, feeders, switches, switchboards, and

major components are shown up to, but not including, branch circuiting, it is an electrical

version of a vertical section taken through the building.

In elevator, it detects the obstacles during the door closing, and reopens the door if there

is something. Photocell can be used together with this.

It prevents passengers from falling into the hoistway when they try to get out

of the car which is stopped between the floors.

In elevator, it makes the buzzer alarm when the car is overloaded and the door remains

open until overloading is eliminated.

In elevator, it protects the equipment from over current.

In elevator, these prevent the excessive car travel at the highest and lowest floor.

In escalators, these stop the escalator if a foreign object becomes wedged at the guard.

In escalators, this is located at the bottom truss of the escalator and provided with on and

off positions to stop or prevents the escalator from starting during maintenance service.

This device, in escalators, is provided at the drive unit location to protect against

accidental movement of the escalator during inspection of the drives or during general

maintenance.

This device, in escalators, stops the escalator automatically if an abnormal current is

supplied to the motor.



This switch cuts off all current supply to the escalator for inspection, maintenance, or

repairs.

In a lightning protection system, the combination of a metal rod and its brace or footing,

on the upper part of a structure.

One of the earlier plastic to be developed in 1938, a du pont trade name for the white,

soft, waxy, and non-adhesive polymer of tetrafluoroethylene.

The number of cycles per unit time of a wave or oscillations expressed in hertz of cycles

per second.

Of a partition, the number of decibels by which sound is reduced in transmission through

it; a measure of the sound insulation value of the partition, the higher the number, the

greater the insulation value.

The cooling effect obtained when 1 ton of ice at 32 oF (0 oC) melts to water at the same

tmeperature in 24 hrs. (equivalent to 12,000 Btu/hr)

AS - STRUCTURAL



The procedures and limitations for the design of structures shall be determined by the

following factors.

Minimum number of stories recommended to be provided with at least 3 approved

recording accelerographs.

Maintenance and service of accelerographs shall be provided by the___.

Who shall be responsible for keeping the actual live load below the allowable limits and

shall be liable for any failure on the structure due to overloading.

The period of continuous application of a given load or the aggregate of periods of

intermittent application of the same load.

Minimum area in square meters a member supports which the design live load may be

reduced.

Minimum height of any wall requiring structural design to resist loads onto which they are

subjected.

Maximum deflection of a brittle finished wall subjected to a load of 250 Pascal applied

perpendicular to said wall.

Maximum deflection of a flexible finished wall subjected to a load of 250 Pascal applied

perpendicular to said wall.

Maximum floor area for a low-cost housing unit.

The level at which the earthquake motions are considered to be imparted to the structure

or the level at which the structure, as a dynamic vibrator, is supported.



A member or an element provided to transfer lateral forces from a portion of a structure

to vertical elements of the lateral force resisting system.

A horizontal or nearly horizontal system acting to transmit lateral forces to the vertical

resisting elements, it includes horizontal bracing system.

The total designed lateral force or shear at the base of a structure.

An element at edge of opening or at perimeters of shear walls or diaphragm.

An essentially vertical truss system of the concentric or eccentric type which is provided

to resist lateral forces.

An essentially complete space frame which provides supports for gravity loads.

A combination of a Special or Intermediate Moment Resisting Space Frame and Shear

Walls or Braced Frames.

That form of braced frame where at least one end of each brace intersects a beam at a

point away from the column girder joint.

The entire assemblage at the intersection of the members.

The horizontal member in a frame system, a beam.

An element of a diaphragm parallel to the applied load which collects and transfers

diaphragm shear to vertical resisting elements or distributes loads within the diaphragm.

Such members may take axial tension or compression.

The boundary element of a diaphragm or a shear wall which is assumed to take axial

stresses analogous to the flanges of a beam

Those structures which are necessary for emergency post-earthquake operations.



That part of the structural system assigned to resist lateral forces.

Moment resisting space frame not meeting special detailing requirements for ductile

behavior.

The displacement of one level relative to the level above or below.

The usable capacity of a structure or its members to resist loads within the deformation

limits prescribed in this document.

The lower rigid portion of a structure having a vertical combination of structural system.

Horizontal truss system that serves the same function as a diaphragm.

An assemblage of framing members designed to support gravity loads and resist lateral

forces.

A structural system without complete vertical load carrying space frame. This system

provide support for gravity loads. Resistance to lateral load is provided by shear walls

or braced frames.

A structural system with essentially complete space frame providing support for gravity

loads. Resistance to lateral load is provided by shear walls or braced frames.

A structural system with an essentially complete space frame providing support for gravity

loads. Moment resisting space frames provide resistance to lateral load primarily by

flexural action of members.

Is one in which the story strength is less than 80% of that of the story above.

An elastic or inelastic dynamic analysis in which a mathematical model of the

structure is subjected to a ground motion time history. The structure's time-dependant



dynamic response to these motion is obtained through numerical integration of its

equations of motions.

The effects on the structure due to earthquake motions acting in directions other than

parallel to the direction of resistance under consideration.

The secondary effect on shears and moments of frame members induced by the

vertical loads acting on the laterally displaced building frame.

Material other than water, aggregate, or hydraulic cement, used as an ingredient of

concrete and added to concrete before or during its mixing to modify its properties.

Concrete that does not conform to definition of reinforced concrete.

Upright compression member with a ratio of unsupported height to average least lateral

dimension of less than three.

Ratio of normal stress to corresponding strain for tensile or compressive stresses below

proportional limit of material.

In prestressed concrete, temporary force exerted by device that introduces tension into

prestressing tendons.

Length of embedded reinforcement provided beyond a critical section.

Stress remaining in prestressing tendons after all losses have occurred, excluding effects

of dead load and superimposed loads.

Length of embedded reinforcement required to develop the design strength of

reinforcement at a critical section.

Friction resulting from bends or curves in the specified prestressing tendon profile.



Concrete containing lightweight aggregate.

prestressing tendon that is bonded to concrete either directly or through grouting.

ASTM A36

High-Yield Strength Quenched and Tempered Alloy Steel Plate, Suitable for Welding.

True or False, Bar larger than 32mm in diameter shall not be bundled in beams.

Minimum concrete cover for a Prestressed concrete for beams and columns for

primary reinforcements.

In a material under tension or compression, the absolute value of the ratio of transverse

strain to the corresponding longitudinal strain.

In column, the ratio of its effective length to its least radius of gyration.

A quantity which measures the resistance of the mass to being revolved about a line.

A type of concrete floor which has no beam.

The tendency for one part of a beam to move vertically with respect to an adjacent part.

A change in shape of a material when subjected to the action of force.

The maximum value of tension, compression, or shear respectively the material sustain

without failure.

It means that by which a body develops internal resistance to 'stress'.

The greatest stress which a material is capable of developing without permanent

deformation remaining upon the complete release of stress.

Intensity of force per unit area.

Loop of reinforcing bar or wire enclosing longitudinal reinforcement.



The measure of stiffness of a material.

The failure in a base when a heavily loaded column strikes a hole through it.

The deformation of a structural member as a result of loads acting on it.

Nominal thickness of of a timber.

The sum of forces in the othorgonal directions and the sum of all moments about any

points are zero.

The complete records of tests conducted (slump, compression test, etc.) shall be

preserved and made available for inspection during the progress of construction and after

completion of the project for a period of not less than.

Wood board should have a thickness specification of.

The distance from the first to the last riser of a stair flight.

A high-speed rotary shaping had power tool used to make smooth cutting and curving

on solid wood.

The major horizontal supporting member of the floor system.

Wood defects are: heart shake, cup shake, star shake, and___.

Dressed lumber is referred to ___.

The other kind of handsaw other than rip-cut saw.

It refers to the occupancy load which is either partially or fully in place or may not be

present at all.

The distance between inflection points in the column when it breaks.

The amount of space measured in cubic units.



In the formula e=PL/AE, E stands for___.

An expansion joint of adjacent parts of a structure to permit expected movements

between them.

the total of all tread widths in a stair.

The force adhesion per unit area of contact between two bonded surfaces.

A structural member spanning from truss to truss or supporting a rafter.

Size of camber for a 25 meters steel truss.

A connector such as a welded strut, spiral bar, or short length of channel which resists

horizontal shear between elements.

The force per unit area of cross section which tends to produce shear.

Size of camber for a 25 meters steel truss.

The law that relates the linear relationship between stresses and strains

Minimum spacing of Bolts in timber connectionn measured from center of bolts parallel

for parallel to grain loading is equal to ___.

According to the provisions of the NSCP on timber connections and fastenings, the

lodaed edge distance for perpendicular to grain loading shall be at least ___.

NSCP specifies spacing between rows of bolts for perpendicular to grain loading shall be

at least ___ times bolt diameter for L/d ratio of 2.

Minimum diameter of bolts to be used in timber connections and fastening in accordance

with NSCP specifications.

Simple solid timber columns have slenderness ratio not exceeding ___.



Nails or spikes for which the wire gauges or lengths not set forth in the NSCP

specifications shall have a required penetration of not less than ___.

Notches in sawn lumber bending members in accordance with the NSCP specifications

shall not exceed.

Notches in sawn lumber shall not be located in the ___.

Notches in the top and bottom of joists shall not exceed ___.

Allowable stresses for tension in structural steel in terms of gross area.

Allowable tensile stress of structural steel based on effective area.

Allowable stress for tension on pin connected members based on net area.

Allowable shear stress on structural steel on the cross sectional area effective in

resisting shear.

For structures carrying live loads which induce impact, the assumed live load shall be

increased sufficiently to provide for same, for supports of elevators the increase shall be.

The slenderness ratio of compression members shall not exceed ___.

The slenderness ratio main members in tension shall not exceed ___.

Concrete cover for pipes, conduits, and fittings shall not be less than ___ for concrete

exposed to earth or weather.

Concrete cover for pipes, conduits, and fittings shall not be less than ___ for concrete

not exposed to earth or weather.

Curing of concrete (other than high-early strength) shall be maintained above 10°C and



in moist condition for at least the first ___ days after placement.

If concrete in structure will dry under service conditions, cores shall be air-dried for ___

days before test and shall be tested dry.

Curing for high-early strength concrete shall be maintained above 10°C and in moist

condition for at least the ___ days after palcement.

The minimum clear spacing between parallel bars in layer shall be db (diameter of bar)

but not less than ___.

Standard hooks used in reinforced concrete beam shall mean.

Standard hooks for stirrups and tie hooks 16mm bar and smaller.

Standard hooks for stirrups and tie hooks 20-25mmbar.

Allowable tolerance on minimum concrete cover for depths greater than 200mm

Allowable tolerance for longitudinal location of bends and ends of reinforcement.

Individual bars with a bundle terminated within the span of flexural members shall

teminate at different points with a stagger of at least ___.

Clear distance between pre-tensioning tendons at each end of member shall not be less

than ___ for strands.

Clear distance between pre-tensioning tendons at each end of member shall not be less



than ___ for wire.

Minimum concrete cover provided for reinforcement of cast in place against permanently

exposed to earth or weather using bars larger than 36mm.

NATIONAL BUILDING CODE

P.D.. 1096

Maximum height of a combustible stand.

Minimum spacing for seats in a chair type measurement from back to back.

Maximum line of travel to an exit of an aisle.

Maximum slope of an aisle.

In standard seating, the minimum spacing of rows measured from back to back.

Minimum width of any seat.

Minimum area of a double acting door view panel.

Minimum clear width of an exit doorway.

Maximum width of an exit door leaf.

Minimum width of an exit corridor.



Minimum number of exit for floors above the first storey having an occupant load of

more than 10

Number of exit for occupant load of 599-999.

Minimum downward projection of a draft curtain

Maximum floor area for an attic made of combustible materials.

Maximum center to center spacing of a draft curtain sprinkler.

Maximum floor area for an attic made of incombustible materials.

Standard gauge for metal hoods in barbeques.

Minimum height of a Siamese connection above grade.

Standard maximum distance of a standpipe from an opening in a stairway.

Minimum wall thickness of a fireplace.

Minimum number of exit for a projection room.

Minimum extended portion of a chimney above the roof.

Minimum air space between walls of a masonry chimney above the roof.

Minimum thickness of glass used for floors.

Maximum rise of one row of seat to the next.

Minimum number of exit for stands within a building serving an occupant load of 300.

Minimum height of a guard rail located in front of the grandstand.

Minimum width of a run in a stand stair.

Minimum spacing for seats with backrests measured from back to back.

Minimum spacing for seats without backrests measured from back to back.



Minimum width of an exit door in an aisle.

Minimum intensity of lights for exits.

Minimum width of side aisles.

Minimum increase in width of aisles for every linear meter.

Minimum width of an aisle serving only one side.

Open space requirement for an interior lot.

Open space requirement for a corner lot or a through lot.

Bounded on all sides or around its periphery by building lines.

Minimum stair width for a residence.

Standard minimum area of a toilet.

Minimum dimension of a kitchen.

Minimum area for vent shafts.

Air space requirement for a school room per person.

Air space requirement for a habitable room per person.

Minimum area of opening of an air duct.

Maximum projection beyond the property line of a footing along the national road and at

least 2.40 mts. In depth.

Minimum clearance of a canopy or a marquee from the sidewalk.

Minimum stair width for occupant load of less than 50.

Minimum width of a temporary walkway.

Minimum clearance of an arcade above sidewalk.



Vacant space left between the building and lot lines less than 2.00 mts in width.

Minimum horizontal dimension of a court.

Minimum width of a passageway connecting a street and a court.

Standard air space requirement per person for factories.

Minimum headroom clearance for a mezzanine.

Air supply per person per minute for auditoriums.

Minimum total area of a window or an opening for a room without artificial ventilation.

Minimum dimension for a vent shaft.

Minimum horizontal clearance of the curb line to the outermost edge of the marquee.

Minimum clearance of the lowest portion of an awning to the ground.

Minimum height of a construction fence.

Minimum live load bearing capacity of a construction canopy.

Minimum height of a protective railing in a construction.

Minimum wind load capacity for roofs for vertical projection.

Maximum height of a handrail above the stair thread.

Minimum ceiling height for naturally ventilated rooms.

Minimum height of a handrail above the stair thread.

Maximum dimension of a stair landing.

Maximum slope of an exit court.

Minimum width of run for circular stair.

Minimum headroom clearance for any stair.



Maximum slope for an exit passageway.

Maximum height of a Siamese connection above the ground.

Maximum distance of any portion of a building from the nozzle of a 23 mts fire hose.

Minimum number of exit for any stage.

Minimum extension of a proscenium wall above the roof.

Minimum width of a stair in a stage egress.

Minimum thickness of glass for jalousies.

Maximum length of glass for jalousies.

Minimum width of exit in a stage.

Minimum lateral spacing for plastic skylights.

A store window in which goods are displayed.

Maximum width of a business sign.

Minimum distance of a sign from any electrical post or telephone wires.

Minimum open space requirement for a corner lot.

Minimum size of thread for an entrance or exit step.

Maximum slope for an entrance or exit ramp.

Minimum number of steps for an entrance or exit stair.

Standard turn circle of a wheelchair.

Office building parking ratio.

Standard size of a perpendicular parking slot.

Hotel building parking ratio.



Hospital building parking ratio.

Maximum distance of a handicapped parking from the facility being served.

Colleges and university parking ratio.

Theaters, cinemas, auditoria, and stadia parking ratio.

Minimum number of wheelchair seating space for 51-300 seating capacity for auditoriums.

Minimum width of a dropped curb.

Minimum Dimensions of an accessible elevator.

Maximum distance of an accessible elevator from the entrance of a building.

Minimum height of signs on walls and doors for the disabled to see comfortable.

Minimum door width for an accessible elevator.

Minimum dimensions for an accessible water closet stall.

Maximum height of signs on walls and doors for the disabled to see comfortably.

Minimum width of a parking slot for the disabled.

Minimum run of a stair for Group A dwellings (residential)

Minimum ceiling height from 3rd floor to succeeding floors with artificial ventilation.

Minimum area of rooms for human habitation.

Least dimension of rooms for human habitation.

Least dimension of an air duct.

Maximum encroachment into a public sidewalk of a foundation at least 600 mm below

the grade line.

Minimum width of an exit door.



Maximum width reduced by handrails and doors fully opened to balconies and

corridors

Minimum width of stairs serving more than 50 occupants.

Minimum width of stairs serving less than 10 occupants.

Maximum reduction in width of a stair due to trims and handrails.

Minimum run of a winding stair.

Maximum run of a winding stair.

Allowable tolerance in the rise and run of every step.

Width of stair requiring an intermediate handrail.

Minimum width of an aisle serving both sides.

Maximum number of seats between the wall and the aisle.

Maximum distance between the back of each seat to the front of the seat behind it.

Maximum width of seat in a stand.

Maximum projection of a penthouse or other projections above the roof.

Maximum ratio of a penthouse area to that of the supporting roof.

Minimum thickness of masonry chimney for residentials.

Minimum thickness of rubble stone masonry chimney for residentials.

Minimum firebox wall thickness.

Minimum thickness of smoke chamber back walls.

minimum thickness of front and side smoke chamber walls.

Minimum number of storeys requiring one (1) or more dry standpipes.



Minimum volume of water a dry standpipe should provide.

Diameter of a dry standpipe requiring a two-way Siamese connection.

Diameter of a dry standpipe requiring a three-way Siamese connection.

Diameter of a dry standpipe requiring a four-way Siamese connection.

Minimum volume of water an interior wet standpipe should provide.

Minimum diameter of a wet standpipe.

Standard diameter of a dry standpipe opening.

Standard length of a fire hose.

Maximum distance of a hose nozzle to any portion of a building.

Standard diameter of a wet standpipe valve.

Maximum projection into a sidewalk of a sign 4.50 mts. above grade.

Minimum vertical clearance from the bottom of a signage to an arcaded sidewalk.

Minimum vertical clearance from the bottom of a signage to non-arcaded sidewalk.

Number of days of work abandonment of stoppage for a building permit to expire.

Width of planting strip for sidewalks 2.00 mts in width.

Minimum horizontal distance of the curb line to the outermost face of an arcade.

Maximum vertical clearance of an arcade above grade.

Slope of ramp of road-way to sidewalk.

Slope of driveway to sidewalk where the height of curb is 200 mm and above.

Minimum vertical clearance of primary lines from the crown of the pavement when

crossing the highway.



Minimum vertical clearance of primary lines from top of sidewalk when installed along

the side of the highway.

Vertical clearance of secondary lines from sidewalks along or crossing the street.

Minimum clearance of conductors from the highest point of a roof.

Maximum height of a dumbwaiter.

Maximum area of a dumbwaiter.

Minimum clearance of conductors from any platform or ground or projection from which

they might be reached.

Minimum vertical clearance of service drop of communication lines above ground at its

point of attachment to than building or pedestal.

Vertical clearance of a service drop communication line when crossing a street.

Maximum capacity of a dumbwaiter.

Minimum width of an access road to a cul-de-sac.

Unit area per occupant for dwellings.

Unit area per occupant for Hotels.

Unit area per occupant for offices and garages.

Unit area per occupant for class rooms.

Unit area per occupant for stores - retail sales rooms upper floors.

Unit area per occupant for nurseries for children.

Unit area for stores -retail sales room for basement and ground floor.

Unit area for hospitals and sanitaria.



Unit area per occupant for aircraft hangars without repairs.

Unit area per occupant for warehouses and mechanical equipment room.

Unit area per occupant for theaters and the like.

Parking requirement for Hotels.

Parking requirement for public assembly buildings such as cinemas, auditoria, theaters,

and the like.

Parking requirement for multi family living unit of 50 sqm floor area.

Parking requirement for multi family living unit above 100 sqm floor area.

Parking requirement for multi family living unit for 50-100 sqm floor area.

Parking requirement for clubhouses, beach houses, and the like.

Parking requirement for motels.

Minimum parking requirement for the handicapped.

Parking requirement for colleges and universities.

Parking requirement for elementary, secondary, and vocational schools.

In BP344, the required width of a corridor.

Maximum slope of a drop curb towards the street.

Maximum slope of a drop curb towards adjoining curb.

Maximum spacing for wheelchair turnabouts.

Maximum slope of a ramp.

Maximum distance of handicapped parking from the structure served.

Preferred width of corridor for the disabled.



Maximum height of a water closet from the floor.

Preferred height of switches from the floor.

Minimum height of a switch from the floor.

Maximum height of a switch from the floor.

Least dimension for a parking slot for the disabled.

In BP344, the minimum height of a handrail.

Maximum length of a ramp for wheelchair.

Minimum length of a ramp landing for wheelchairs.

One or more habitable rooms which are occupied or which are intended or designated to

be occupied by one family with facilities for cooking , sleeping, living, and eating.

That portion of the foundation of a structure which spreads and transmits loads directly

to the ground or soil.

A continuous horizontal layer of masonry units.

A room or suite of two or more rooms, designed and intended for , or occupied by one

family for living, sleeping, eating, and cooking purposes.

A stationary open hearth or brazier, either fuel-fired or electric, used for food preparation.

A portion of the seating space of an assembly room, the lowest part of which is raised

1.20 mts or more above the level of the main floor.

The pipe which connects a flue-burning appliance to a chimney.

A hearth and fire chamber or similarly prepared place in which a fire may be made and

which is built in conjunction with a chimney.



A horizontal structural piece which supports the end of the floor beams or joists or walls

over opening.

Same as heliport except that no refueling, maintenance, repairs, or storage of

helicopters is permitted.

The vertical supports, such as posts or stanchions, as used in indigenous or traditional

type of construction.

Any surface or underground construction covered on top, or any fire-proof construction

intended for the storage of valuables.

A term which may be used synonymously with a partition.

The unit area per occupant for hotels.

The unit area per occupant for dining establishments.

The unit area per occupant for theaters.

A building permit shall expire if work authorized is abandoned or suspended at any time

after commencement for a period of.

Front yards for commercial buildings abutting a road-right-of-way of 25-29 meters shall

have a minimum width of

Offices shall be provided how many cubic meters of air per person?

Multiple living units of up to 6 units built on the same lot shall have an access road

directly connecting said building to a public street a width of.

Sidewalks of 2 mts or more in width shall include on its outer side a planting strip of not

less than how many millimeters in width?



Arcades shall be cantilevered from the building line over the sidewalk and the horizontal

clearance between the curb line and the outermost face of any part of the arcade shall

not be less than.

Printing plants shall be classified under what type of occupancy.

Power plants shall be classified under what type of occupancy.

Convents shall be classified under what type of occupancy.

Repair garages shall be classified under what type of occupancy.

Reformatories shall be classified under what type of occupancy.

Turnabout should also be provided at or whithin how many meters of dead end.

In B.P. 344, the maximum slope a ramp is.

Under B.P. 344, a level area of not less than how many meters shall be provided at the

top and bottom of any ramp.

Under what classification of occupancy does Mental Hospitals fall?

Under what classification of occupancy does Monasteries fall?

Under what classification of occupancy does Aircraft hagars fall?

Under what classification of occupancy does cold storage and creameris fall?

Under what classification of occupancy does private garage fall?

Minimum loading slot requirement for Hospitals and hotels.

Minimum travel distance from handicapped parking to facility being served.



Percentage required for number of parking if parking garages are available within 200

meters of structure.

Parking requirement for amusement centers.

Parking requirement for markets.

Parking requirement for neigborhood shopping centers.

Parking requirement for multi-family living units of more than 100 sqm of living unit area.

Parking requirement for multi-family living units of up to 50 sqm of living unit area.

Parking requirement for places of worhip.

Maximum projection of a balcony over a street of over 3 meters but not more than 6 mts.

Maximum projection of a balcony over a street of 10 mts to less than 11 mts in width.

Maximum height of 1st the floor for a 2-story wood structure with a height of 7 mts.

Maximum spacing of posts for 2-story wooden structure with a height of 8 mts.

Under what classification of occupancy does fences of over 1.80 mts in height fall?

Under what classification of occupancy does Aircraft repair hangars fall?

Under what classification of occupancy does factories and workshops using

incombustible and non-explosive materials.

Under what classification of occupancy does wood working establishements fall?

Under what classification of occupancy does police and fire stations fall?

Standard length of a Wheelchair.

Standard width of a wheelchair.

How many meters above the floor is the comfortable reach of persons confined to a



wheelchair.

How many meterd is the comfortable clearance for knee and leg space under tables for

wheelchair users.

Accessibility, reachability, usability, orientation, workability and efficiency, and ___ are

the basic planning requirements of BP344.

Number of wheelchair seating for an assembly seating capacity of 51-300.

R.A. 7277

A long interior passageway providing access to several rooms.

A raised rim of concrete, stone or metal which forms the edge of street, sidewalk, etc.

FIRE CODE OF THE PHILIPPINES

Minimum exit door width.

Minimum floor to ceiling height.

Maximum stair rise height for a class A stair.

Maximum height between landings for class A stair.



Minimum headroom for class A & B stairs.

Unit area per person for waiting areas or standing rooms.

Number of exits for place of assembly for 1000 occupants

Travel distance to an exit without fire sprinkler system.

Travel distance to an exit with fire sprinkler system.

Minimum spacing of rows of seats from back to back for a public assembly building.

Maximum number of seats in a row in between aisles.

Maximum number of seats in a row opening on to an aisle at one side.

Standard width of a seat without dividing arms for places of assembly.

Minimum width of an aisle serving an occupant of 60.

Minimum headroom created by any projection from the ceiling.

Minimum clear width of turnstiles.

Minimum dimension of landings in direction of travel for class A & B stairs.

Minimum number of risers in any one (1) flight of stairs.

Minimum height of a handrail above the upper surface of the tread.

Minimum clearance of a handrail from any wall.

Minimum height of a guard rail.

Maximum height of a guard rail.

Minimum inner radius of a monumental stair.

Minimum width of any balcony or bridge.

Minimum width of a class A ramp.



Maximum rise of any floor from the balcony floor to which an access door leads.

Maximum vertical height in floors for an escalator.

Minimum width of a fire escape stair for existing stairs.

Minimum width of landing for a fire escape stair for existing stairs.

Minimum tread for a fire escape stair for small buildings.

Maximum rise of fire escape stair for a small building.

Maximum rise of fire escape stair for existing stairs.

Maximum height between landings for a fire escape stair for existing stairs.

Minimum headroom clearance for a fire escape stair for existing stairs.

Minimum headroom clearance for a fire escape stair for small buildings.

Number of exits for place of assembly for 600-1000 occupants.

Maximum occupant load for a class C public assembly.

Minimum number of exit for an Institutional type of structure.

Maximum travel distance between room door intended as exit access and exit with

sprinkler system for institutional use.

Maximum travel distance from the door of any room to exit for hotels with sprinkler.

Maximum travel distance from the main entrance door to exit for apartments with sprinkler.

Minimum increase in width for an aisle per linear meter.

Minimum width of an aisle serving an occupant of 60 or more serving one side for a

public assembly building.

Minimum width of an aisle serving an occupant of 60 or more serving two sides for a



public assembly building.

Minimum width of an aisle serving an occupant of below 60 for a public assembly building.

Minimum width of an aisle for an educational use building.

Minimum width of an aisle for hospitals or nursing homes.

Minimum width of an aisle for custodial care institutions.

Minimum width of an aisle for business use structure.

Minimum width of an aisle for an industrial building.

Occupant load per person for laboratories.

Jails are classified under what classification of occupancy.

Courtrooms with an occupant load of more than 100 are classified under what

classification of occupancy.

Armories with an occupant load of more than 100 are classified under what classification

of occupancy

Libraries are classified under what classification of occupancy.

Rooms where baled, bundled or piled materials segregated into desired sizes or groups.

Buildings or structures 15 meters or more in height.

Buildings or structures used for the storage of explosives, shells, projectile, etc.

An air compartment or chamber to which 1 or more ducts are connected and which form

part of an air distribution system.

A kind of stable explosive compound which explodes by percussion.

Descriptive of any substance that ignites spontaneously when exposed to air.



A material that readily yields oxygen in quantities sufficient to stimulate or support

combustion.

A process where a piece of metal is heated prior to changing its shape and dimension.

The process of first raising the temperature to separate the more volatile from the less

volatile parts and then cooling and condensing the result vapor so as to produce a nearly

purified substance.

A finely powdered substance which, when mixed with air in the proper proportion and

ignited will cause an explosion.

Temperature rating at flash point.

A class of fire with flammable liquid and gasses.

The temperature at which a liquid is transformed or converted into vapor.

Minimum fire resistance rating for a firewall.

A continuous passageway for the transmission of air.

The minimum temperature at which any material gives off vapor in sufficient

concentration to form an ignitable mixture with air.

A gas, fume or vapor used for the destruction or control of insects, fungi, vermin, germs,

rodents or other pests.

Minimum width of any driveway in and around a lumber yard / piles.

Minimum height of fence for a lumber yard for exterior storage of lumbers.

Maximum width of sumps for the retention of oil and petroleum products.

For Refineries, distilleries, and chemical plants, the minimum height for a fence.



Minimum travel distance from any individual room subject to occupancy by not more

6 persons.

Maximum distance of travel from the high hazard area to an exit.

Minimum distance of an incinerator from any structure used other than a single family

dwelling.

Maximum reduction in width of a stair by a handrail.

Minimum door width of a single door in a door way.

Maximum change in elevation between the interior of a door to the outside of it other than

a balcony.

Maximum force in kilograms required for a panic hardware.

Maximum height required for a panic hardware installation.

Minimum height required for a panic hardware installation.

Maximum number of occupant for a subdivided room or space by a folding partition.

Minimum width of a door for family day care homes.

Minimum stair width for a class B stair serving an occupant load of less than 50.

Length of a nosing or effective projection over the level immediately below it for tread

below 25 cms in dimension.

Maximum height of a handrail.

A combustible liquid is any liquid having a flash point at or above.

The time duration that a material or construction can withstand the effect of standard

fire test is known as.



Any material which by its nature or as a result of its reaction with other elements

produces a rapid drop in temperature of the immediate surrounding.

Classified as mercantile occupancies, the travel distance from exits shall be.

Under what classification of occupancy does pool rooms fall.

Under what classification of occupancy does home for the aged fall.

Under what classification of occupancy does court houses fall.

Under what classification of occupancy does refineries fall.

Under what classification of occupancy does drugstores fall.

Minimum width of an aisle in a store for mercantile occupancies.

Minimum number of aisles for Class 'A' stores.

Minimum clear width of aisles for a Class 'A' store.

Minimum clear width of an exit access through a covered mall.

Minimum height of buildings requiring automatic sprinkler protection.

Standard inner radius of a curved stair in business occupancies.

Maximum height of riser for Class 'A' stairs.

Maximum height of riser for Class 'B' Stairs.

Minimum width of stair for Class 'B' stairs serving more than 50 persons.

Minimum width of stair for Class 'B' stairs serving 50 persons and below.

Maximum horizontal projection of a handrail over a stair.

Minimum width of a stair width for Class 'A' stairs.

Maximum height between landings for a Class 'B' stairs.



Minimum width of landings in direction of travel for Class 'A / B' stairs.

Minimum width of Class 'A' ramp.

Minimum width of Class 'B' ramp.

Standard slope of Class 'B' ramp in percentage.

Maximum height between landings for Class 'A' ramp.

Maximum height between landings for Class 'B' ramp.

Minimum width of ramps of 3 stories or more in height.

Minimum width for fire escape for existing stairs.

Minimum horizontal dimension of any landing of platform for existing stairs for fire escape.

Maximum rise for a fire escape for very small buildings.

Maximum height between landings for fire escape for existing stairs.

Minimum distance travel to an exit for storage occupancies of high hazard commodities.

Class of fire involving combustible metals, such as magnesium, sodium, potassium, and

other similar materials.

Class of fire involving ordinary combustible materials, such as wood, papers, cloth,

rubber, and plastics.

A tank, vat or container of flammable or combustible liquid in which articles or materials

are immersed for the purpose of coating, finishing, treating or similar processes.

An integrated system of under ground or overhead piping or both connected to a source

of extinguishing agents or medium and designed in accordance with fire protection

engineering standards which when actuated by its automatic detecting device,



suppresses fire within the area protected.

A continuous and unobstructed route of exit from any point in a building to a public way.

Minimum distance of an incinerator containing kindled fire or rubbish fire or bonfires.

Under what classification of occupancy does museums fall?

Under what classification of occupancy does town halls fall?

Maximum width of a single door in a doorway.

Minimum tread for a fire escape stair for existing stairs.

Maximum spacing of rungs for a fire escape ladder.

Minimum spacing of rungs for a fire escape ladder.

Class III combustible liquids shall mean any liquid having a flash point at how many

degrees Celsius?

In standard seating, the minimum spacing from back to back.

Minimum space from the back of chair to the front of the chair behind.

Maximum slope for aisles for public assembly structures.

Size of standpipe provided for each stage for public assembly building.

Occupant load per person for classrooms.

Where exterior corridors or balconies are provided as means of exit, they shall open to the

outside and shall be spaced ___ meters apart. (Educational)

Minimum dimension of a rescue window for educational occupancies.

Maximum height from the floor for a rescue window for educational occupancies.

Minimum width of corridors, aisles, and ramps for exits in hospitals and nursing homes.



Minimum width of corridors, aisles, and ramps for exits in residential-custodial care.

Any room for sleeping in institutional occupancies if subdivided shall have a maximum

area of how many square meters?

Includes buildings or groups of building under the same management in which there are

more than 15 sleeping accommodations for hire.

Includes buildings containing three or more living units independent cooking and bathroom

facilities, whether designed as rowhouse, apartment house, tenement, garden apartment,

or by any other name.

Minimum number of stories of apartment buildings requiring fire alarm system.

Minimum number of apartment units requiring fire alarm system.

PROFESSIONAL PRACTICE

The third phase of an architect's regular services.

Project financing falls under what kind of service of the architect.

Comprehensive planning falls under what service of the architect.

The fee of the architect for design-build services on a guaranteed maximum cost aside



from his fee for regular design services.

What percentage of an architect's work is liability under the civil code.

For interior design services, the architect shall be paid what percentage of the fee upon

submission of the final design.

When the owner fails to implement the plans and documents for construction as

prepared by the architect, the architect is entitled to receive what percentage of his fee.

The minimum fee per appearance of an architect when rendering service as an expert

witness shall be.

The minimum basic fee for specialized decorative building.

The minimum basic fee for industrial buildings with a project cost below 50 million pesos.

The minimum basic fee for hospitals with a project cost below 50 million pesos.

In design-build services, the single-point-responsibility of project delivery puts the legal

liability for both the design and construction on the.

The release of 10% retention by the owner shall be done after how many months from

the date of final payment.

Printed documents stipulating the procedural and administrative aspect of the contract.

An outline specification enumerating the type and trade names of materials to be used.

A price given by a contractor, sub-contractor, material supplier or vendor to furnish

materials, labor or both.

A statement from the architect confirming the amount of money due the contractor for

work accomplished.



A bond furnished by the contractor and his surety as a guarantee to execute the work in

accordance with the terms of the contract.

An offer to perform the work prescribed in a contract at a specified cost.

The fee of the architect for design-build services by administration.

A stipulation of the use of specific products or processes without provision for substitution.

A list of instructions stipulating the manner on which bids are to be prepared.

The performance and Payment Bonds shall be released by the owner after the expiration

of how many months from the final acceptance of the work.

The Guarantee Bond is released how many months after the date of final payment.

How many days shall the Building Official issue a certificate of occupancy after final

inspection of the project.

A statute specifying the period of time within which legal action must be brought for

alleged damage or injury.

A bond, the form or content of which is prescribed by statute.

A rule that certain kinds of contracts are enforceable unless signed and in writing or

unless there is a written memorandum of their terms signed by the party to be charged.

A contract transferring the right of possession of buildings, property, etc., for a fixed

period of time, usually for periodical compensation called 'rent'.

A tenure by lease; real estate held under a lease.

The person receiving a possessory interest in buildings, property, etc., by lease.

The person granting a possessory interest in buildings, property, etc., by lease.



Range of the multiplier for Multiple of Direct Personnel Expense.

This type of compensation is only applied to non-creative work.

Supervision Work is a non-creative work, true or false.

A world-wide used method of compensation for architectural services.

This method of compensation is applied only to pre-design services, supervision work,

and other works which the Architect may perform other than the regular and specialized

allied services.

This type of compensation is similar to the concept being charged by realtors,

developers, and lawyers.

For reimbursable expenses, how many kilometers from the Architect's office shall a work

be located to allow reimbursable expenses.

This method of compensation is frequently used where there is continuing relationship

on a series of projects.

The full-time construction inspector shall be under the technical control and supervision

of the ___.

Submission of shop drawings shall be accompanied by a ___ in duplicate.

How many sets of shop drawings for approval shall the contractor submit to the Architect?

Who shall have the responsibility of securing, but not liable for non-issuance, of the final

occupancy permit.

True or false, can the owner relegate to the contractor the responsibility of establishing



the lot lines, boundary lines, easements, and benchmarks provided that the owner pays

the contractor for such works?

Who shall have the responsibility for establishing lot lines, boundary lines, easements,

and benchmarks?

Who shall pay for the services of a licensed surveyor for confirmation and certification of

the location of column centers, piers, walls, pits, trenches, pipe work, culvert work, utility

lines, and other similar works required by the contract.

Professional Fee for the Architect as a full-time supervisor.

Professional fee for the Construction Manager.

Four types of Contracts for construction management

Under PD 1096, what should be the proportion of sidewalk width to that of the road right-

of-way?

At what interest rate per month should a client pay the architect should the former fail to

pay the latter beyond 30 days from receipt of billing?

What code holds the architect responsible for the building/structure he designed for a

certain period of time.

What type of compensation is applied to cases where the architect's personal time is

required, such as conferences, joint venture activities, etc.?



What type of bond guarantees payment on all obligations arising from the contract?

What type of compensation is applied to most of Gov't projects and entails more paper

works and is advantageous to both client and architect.

Professional Fee for the Project Manager.

If the Project Manager is hired by the owner, who shall have the responsibility of hiring

the Construction Manager?

True or false, based on the Civil Code, the Project Manager has no legal responsibility

insofar as design and construction is concerned.

His primary responsibility is the exercise of overall cost control which relieves the owner

of many of the anxieties that usually beset , particularly those concerned with forecasting

cost and completion dates.

In the architect's code of ethics, to whom does the architect has responsibility to seek

opportunities for constructive service in civic and urban affairs?

What PD created the PRC which regulates the practice of various professionals.

Architect XYZ uses paid advertisements without sanction by professional consensus and

years of experience. His action is unethical with respect to his relation to whom?

Additional information on contract documents issued to bidders before date of bidding.

The offer of a bidder to perform the work described by the contract documents when made

out and submitted on the prescribed proposal form, properly signed and sealed.

The cashier's check or surety bond accompanying the proposal submitted by the bidder,

as a guarantee that the bidder will enter into a contract with the owner for the construction



of the work, if the contract is awarded to him.

Instructions which may be issued prior to the bidding to supplement and/or modify

drawings, specifications, and/or general conditions of the contract.

Written or printed description of work to be done describing qualities of material and mode

of construction.

Means information, advice or notification pertinent to the project delivered in person or

sent by registered mail to the individual, firm or corporation at the last known business

address of such individual, firm or corporation.

Includes labor or materials or both as equipment, transportation, or other facilities

necessary to commence and complete the construction called for in the contract.

Means to build-in, mount in position, connect or apply any object specified ready for the

intended use.

Means to purchase and/or fabricate and deliver to jobsite.

Means to furnish and install.

No further retention shall be made on the balance of the contract when how many percent

of the contract has been completed?

No payment shall be made on contracts in excess of how many percent of the contract

price.

The guarantee bond is equal to how many percent of the contract price?

How many percent of the architect's fee is payable to the architect upon completion of the

preparation of the schematic design phase and up to final design development phase?



Standard factor computed for changes and/or revisions made on completed contracts.

Approximately, how many square meters of office space for the architect is built by the

contractor as temporary facilities for the project.

All trees and other plants that need to be transplanted elsewhere within ___ meters

shall be done by the ___ at his own expense.

If there is a variance/discrepancy between the drawings and specifications, what shall

be followed?

How many days prior to bidding shall the contractor seek the architect's

clarification as to the particular areas of work which requires evaluation of the architect?

How many days upon written notice can a contractor terminate a contract with a valid

reason?

Suspension of work for ___ days by order of any court or other public authority through

no act or fault of the contractor gives the him the right to terminate contract.

True or false, the contractor can terminate contract if the owner should fail to pay the

contractor any sum within 15 days after its award by arbitration

True or false, the contractor can terminate contract if the owner should fail to act upon

any request for payment within 30 days after its certification by the architect.

Who declares bankruptcy as a valid reason for the termination of a contract?

True or false, upon termination of contract and upon the decision of the architect that

materials and equipment left by the contractor which do not belong to him can be used

and rent of such shall be borne by the failing contractor.



True or false, in case of suspension of work, all unpaid work executed including expenses

incurred during suspension shall be evaluated by the architect and charged to the owner.

True or false, the owner has no right to claim liquidated damages if he takes over the

work from the contractor for failure to complete the project.

How many days prior to canceling an insurance be given to the owner stipulating the

intention to cancel?

How many percent of the contract amount is the Performance Bond?

How many percent of the contract amount is the Payment Bond?

A contract provision setting forth the damages a party must pay in the event of his breach.

Basic Fee for Physical Planning Type 1 or site such as industrial estates, commercial

centers, sports complex, resorts, etc.

Predecessor of PD 1096

What presidential decree institutionalized the profession of environmental planning?

It is a right enfoeceable against specific property to secure payment of an obligation.

Minimum basic fee for simple projects.

Minimum basic fee for alterations/renovations.

When the architect is engaged to render opinion or advise, clarification or explanation

on technical matters pertaining to his profession, the minimum basic fee shall be ___.

When rendering service as an expert witness, the architect is compensated ___/ hr.

Minimum basic fee for Group 5 Projects (monumental).

What is Group 6 Project classification?



Minimum Basic fee for housing projects.

Under what classification of Project does Hospitals and Medical Buildings fall?

Under what classification of Project does Stadium fall?

Minimum Per diem paid to the architect if work is beyond 50 kms. From office.

On the remaining 15% work fee of the architect, where does the 5% go.

Repairs and corrective works at the expense of the contractor should be done within how

many days after written notice by owner?

Failure on the part of the contractor to remove condemned work shall give the owner right

to remove said work at contractor's exepense and contractor shall pay the owner the

expenses incurred within how many days from removal by the owner of said work?

Contract time reckoning shall commence on the ___ from receipt of ___.

An area of a city where municipal buildings are grouped.

Any article of property not consisting of or affixed to land plus any interest in land that is

less than a freehold.

No person who is not a citizen of the Philippines may take the board exams or practice

the profession unless the country of his relation allows the same ___.

1

1



1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1



1

1



Pyramid

Cheops

Rameses 1

Marble

Columnar trabeated

Propylaea

Parthenon

Arch and vault

Composite

Domical roof construction

St. Sophia, Constantinople

Sober and dignified

Marble



Pantheon

Pteroma

Gladiatorial Contests

Stoa

Acropolis

Antefix (Antefixae)

Acroterion / Acroterium

Anthemion

Apotheca

Anthemion

Marble

Pisa

Refectory

Baroque

Cortel

Tracery

Cha-sit-su

Masjid



Stupa

Bale

Ziggurat

Doric

Pyramid

Tumuli

Apse

Dipteral

Prytaneion

Erich Mendelsohn

Walter Gropius

Art Noveau

Cambodian

Van Alen

Embrasures

Agra

Amenemhat I



Senusret I

Heb-sed

Pyramid of Zoser

Pyramid of Khufu

Groin Vault

Visayan

Greek

Canephora

Bartizan

Basilica

Greek

Helm Roof

Masu-gumi

Cavetto

Carlos Santos Viola

Caesar Homer Concio

Pinnacle

William Cosculluela

Baroque for of Ornamentation

Richard Josef Neutra

Sarcophagus



Imhotep

Bouleuterion

U.S. / English Renaissance

Tussel House

Astylar

Jugendstijl

Ludwig Mies Van Der Rohe

Liceo de Manila

Crenel

Balance

Eclecticism

Eero Saarinen

Kaufman House

Juan Nakpil

Kenzo Tange

Felipe Mendoza

Palace of Persepolis

Saracenic Architecture

Echinus

S-tiles



Agora

Entasis

Baroque

Pagoda

Roman

Crepidoma

Amphi-Prostyle

Cenotaphs

Cheops

Chefren

Mykerinos

Aljibe

Impluvium

Naos

Crypt

Bema

Console

Villa

Atrium House

Romanesque



Romanesque

Alvar Aalto

Tomas Mapua

Forum

Welton Becket

Chartres Cathedral

176

Greek

Ziggurat

Acanthus

Arch

Triforium

Clerestory

Module

Tympanum

Arcade

Architrave



Entablature

Cornice

Frieze

Architrave

Octagonal

13

Tokonama

Square

Hagia Sophia

Pediment

Pendentive

Narthex

Nave

Ambulatory

Cantharus

Exedra

Baldachino

Tabernacle



Niche

Minaret

Lacunaria

Bayon

Mudejar

Crocket

Abacus

Capital

Plinth

Chancel

Frigidarium

Barasoain Church

Seraglio

Ziggurat

Mnesicles

Harem

Great Temple, Abu Simbel

Great Temple, Abu Simbel

Palm, Lotus, and Papyrus



Mortuary and Cult Temples

Mortuary Temple

Ziggurat

Pyramid

Cult Temple

Persian

Atlantes

Exedra

Peripteral

Stylobate

Stereobate

Gymnasium

Pronaos, Naos, and Epinaos

Pinacotheca

Prostyle

Intercolumniation

Eustyle

Areostyle

Systyle

1.5 Diameters

3 Diameters



Odeion

Circus

Colosseum

Wrestling

stadium

In Antis

Amphi-Antis

Gymnasium

Doric

Epidauros

Tuscan and Composite

Use of Concrete

Pantheon

Forum Romanum

Xerxes

Artaxerxes

Callicrates and Ictinus

Phidias

Lacus

Salientes



Circus Maximus

Vespasian / Domitian

Mnesicles

Clepsydra

Treasury of Atreus

Theron

Libon

Cossutius

18

4-horse Chariot

Cyma Reversa

Key Pattern

Sculptured Reliefs

House #33

Bird's Beak

Peribolus

Domus

Podium

Bepidales



Opus Mixtum

Opus Incertum

Opus Recticulatum

Opus Quadratum

Basilica

Choragic Monument

Fret

Termini

Opus Tesselatum

Callimachus

Thalamus

Timber-enframed Portal

Etruscans

Insula

Nymphaeum

Renaissance



Louis Sullivan

Iñigo Jones

Hypostyle Hall

Thothmes I

Ptolemy III

Buckminster Fuller

Rock-Hewn Tombs

George Ramos

Tepidarium

Calidarium

Frigidarium

Sudatorium

Apodyteria

Unctuaria

Forum

East

South

West

Cancelli



Ambo

Bema

Apse

Statues

Centralized

Anthemius and Isidorus

St. Sophia, Constantinople

Little Metropole Cath., Athens

Nea Moni

Lantern

Cloisters

Ornamental Arcades

Worms Cathedral

Cathedral



Greek Cross

Latin Cross

Bernini

Dispensa

Falig

Minoru Yamasaki

Greek

Balteus

Roman

Agrippa

Prytaneion

Marcel Lajos Breuer

Felix Outerino Candela

Hypotrachelion

Doric

Ionic

Temple of Nike Apteros, Athens

Tower of the Winds, Athens

Acanthus and Dolphin

Greek



Papyrus

Cult Temple

Balneum

Cella

Triglyph

Le Corbusier

Eliel Saarinen

Frank Lloyd Wright

Hennevique

Jose Herrera

Juan Nakpil

Guillermo Tolentino

Shah Jahan

Telamones or Atlantes

Herms

Terms

Madrassah

Moscow

Erich Mendelsohn

John Ruskin and William Moris

Eclecticism



Neo-Classism

Parti

Felipe Mendoza

George Ramos

Juan Nakpil

Juan Nakpil

Morong Church

Panay Capiz

Antonio Sin Diong

Gabriel Formoso

George Ramos

Lamin

Zaguan

Bilik

Azotea

Dapogan



Greenbelt

Platting

Azimuths

Final Plat

Urban Sprawl

Advocacy Planning

Sustainable Land Use Planning

Local Government Code, 1991



R.A. 7160

Promote Human Growth

Sustainable Development

Hippodamus of miletus

City

Agricultural Surplus

Insula

Truebounded City

Traffic.

City Planning

Daniel Burnham

Subdivision Regulations

Urban Design



Ekistics

Human Settlement

Capital Facilities Planning

Physical Settlement

Concentric Zone Concept

Buildable Area

Dwelling Unit

Gabion Wall

Cliff

Meadow

Ridge

Ravine

Restriction



Parcel

Common Wall

Brasilia

Density

National Shelter Program

Social Housing

Option to Buy

Earnest Money

Amortization

Deed

Developers

Appraiser



Real Estate Broker

Total System

Housing Codes

Zoning

Prefabrication Manufacturer

Subsystems

Urban Renewal

Urban Area

Code of Multiplicities and

Tradition

Primitive

Vernacular

Grand

Productive Use

Health and General Use

Social Implications



6.00 mts.

Bedrooms

Growth and Change

Gazebo

Grass and Plants

Site Planning

Ecology

Accurate Aerial Mosaic

Comprehensive Plan

Transportation System

Urban Blight

Star

Freeways

Landmark

Lane

Land-use Plan

Land



Land Boundary

Land Survey

Land-use Analysis

Land-use Survey

Latitude

Lawn

Lease

Leasehold

Latent Heat

Lawn Sprinkler System



90 cms.

1.50 mts.

60 cms.

1.80 mts.

1 cum.

508 mm.

1.50 mts.

0

15.20 mts.

45.70 mts.

30.50 mts.

26

51 mm.

102 mm.

60 cms.

15 cms.

0.90 mtr.

38 mm. (11/2"- 2")



51 mm. (2")

1

1

1

1

Rigid and Flexible

Burr

Electric and Hydraulic

0.60 mtr.

Automatic Transfer Switch (ATS)

Moisture resistant, in wet and

dry location

Lift

2 mts.

House Drain

1.20 mts.

Specific Lighting



Moisture and Heat Resistant-

Cross-Linked Thermosetting

10' or 3 mts

Sheave

Infra Red

Pvt. Automatic Branch Exchange

Capacitor

Power Panel

Polyethylene

No. 12

No. 14

Rectifier

D.C. Generator

Humidistat

Hygrostat

Governor

Corporation Stop

Relief Vent

Escutcheon



Developed Length

Flush Valve

Sewage

Carbon Monoxide

Phase

Thermosetting

Thermostat

Rigid Board Insulation

Strom Sewer

Alternator

Heat

1 1/2" (38mm)

1/8 Bend

Thermostat

1 1/2"

3/8"

1



0

Battery of Fixtures

Common Vent

4" (102mm)

4" (102mm)

Ball Valve

Zeolite

6" (150mm)

5.5 sqmm

60 Cycles

Service Drop

Phon

Sound Absorption

Wavelength

Sound Attenuation



Sabin

Sound Diffraction

Threshold of Audibility

Sound

Pure Tone

Sine Wave

Luminaire

Candela

Plumbarius

Plumbum

Combination

Waste

and Vent system

Air curtain

General Lighting

Outside Door Latch

Panic Bar

Sanitary Sewer Main



Fixture

Telecommunication System

2 1/2" (64mm)

Circuit Vent

Loop Vent

Barometer

Ionization

Refrigeration

Fixed Temperature

Heat Detector

Bibbcock

135-160˚F

Top Dip to Crown Weir

Double Bend

2"

3"

(1:100)

(1:35 & 1: 45)

(1:30)

(1:75)



3

(1:5)

3

3

15 minutes

Atmospheric Vacuum Breaker

8%

300 mm

300 mm

4'

60˚

1

1



0.305 mtr. / 305 mm

0.45 mtr. / 450 mm

6.10 mts.

600 mm

4.60 mts.

1

150 mm / 15 cms.

300 mm

0.90 mtr.

2.10 mts.

3.00 mts.

10

Luminous Flux

Luminance

Foot-Candle

Lux

Indirect Lighting



Tungsten

Cathode

Pressure Regulating Valve

Air Motor

Counterweight

Winding-Drum Machine

Guiderails

600 mm

30 mm

558 mm

38 Meters/Min

68-74 ˚F

PABX

Impedance

Resistance

Sound Intensity

Accent Lighting



Fluorescense

High-Pressure-Sodium (HPS)

Microphone

Thermal Detector

Cross Light

Softening

Luminaire

Eggcrate

Psychrometric Chart

Sensible Heat

Convection

Floodlight

Limit Controls and Interlocks

Porous Absorbents

Refraction

1

Upfeed System / Direct Method



Wye and 1/8 Bend

Energy Efficiency Rating (EER)

Fan Coil Unit

Busway

Bus

Busway

Passive Infrared

Light Beam

Ultrasonic

Washdown

1



Junction Box

Washdown (WD)

Reverse Trap (RT)

Blowout (BO)

Siphon Vortex (SV)

Siphon Jet (SJ)

Siphon Vortex (SV)

Siphon Jet (SJ)

Reverse Trap (RT)

Washdown (WD)

Water Hammer



Developed Length

Gate Valve

Globe Valve

Effluent

Spring Line

Crown

Invert

Microwave

Passive Infrared with

Ultrasonic (or Microwave)

Proximity / Capacitance

Black

Metal Halide Lamp

Mercury Lamp

Tungsten Halogen Lamp



High-Pressure-Sodium (HPS)

Intelligent Building

Riser Diagram

Safety Shoe

Fascia Plate

Weighing Device

Circuit Breaker

Limit Switches

Handrail Guard Switches

Disconnect Switch

Mechanical

Maintenance

Locking Device

Current Overload Safety Switch



Knife Switch

Air Terminal

Teflon

Frequency

Transmission Loss

Ton of Refrigeration

Zoning, site characteristics



Occupancy, configuring

structural system, and

height

14

Owner

Occupant of the building

Load duration

14 sqm.

1.50 mts.

1/240 of wall span

1/120 of wall span

60 sqm.

Base



Collector

Diaphragm

Base Shear, V

Boundary Element

Braced Frame

Building Frame System

Dual System

Eccentric Braced Frame (EBF)

Joint

Girder

Diaphragm Strut

Diaphragm Chord

Essential facilities



Lateral Force Resisting System

Ordinary Moment Resisting

Space Frame

Story Drift

Strength

Platform

Horizontal Bracing System

Structure

Bearing Wall System

Building Frame System

Moment Resisting Frame System

Weak Story

Time History Analysis



Orthogonal Effect

P-delta Effect

Admixture

Plain Concrete

Pedestal

Modulus of Elasticity

Jacking Force

Embedment Length

Effective Prestress

Development Length

Curvature Friction



Structural Lightweight Concrete

Bonded Tendon

Structural Steel

ASTM A514

1

40 mm

Poisson's Ratio

Slenderness Ratio

Torsion

Flat Slab

Shear

Deformation

Yielding Stress

Stress

Allowable Stress

Stress

Tie / Stirrup



Stiffness Ratio

Punching Shear

Deflection

6 inches

Equilibrium

2 years

not less than 1"X4"

Run

Portable Hand router

Girder

Knots

Smoothed or planed lumber

Cross-cut saw

Live load

Effective length

Volume



Modulus of Elasticity

Contraction joint

Total run

Bond Stress

Purlin

Size of Dead Load Defelection

Shear Connector

Shear Stress / Shearing Stress

Size of Dead Load Defelection

Hook's Law

4 X diameter of bolt

4 X diameter of bolt

2.5

12 mm

50



11 diameters

1/6 depth of member

Middle Third Span

1/4 the depth

0.60 of specified min. yield stress

0.50 of specified minimum

tensile strength

0.45 Fy

0.40 Fy

100%

200

240

40 mm

20 mm

7



7

3

25 mm

180° bend + 4db extension

but not less than 65mm at free

end of bar


at free end


at free end

–12 mm

± 50 mm

40db

3db

4db



75 mm

National Building Code

2.70 mts.

0.85 mtr.

45.00 mts.

One is to Eight (1:8)

0.84 mtr.

0.45 mtr.

1,300 sqmm / 1.30 sqm.

0.70 mtr.

1.20 mts.

1.10 mts.



2

3

0.30 mtr.

250.00 sqm

1.80 mts.

750.00 sqm.

Ga. 18

300 mm

300 mm

200 mm

2

600 mm

2" / 50 mm

12.5 mm

400 mm / 0.40 mtr.

3

0.90 mtr

0.28 mtr.

0.75 mtr.

0.60 mtr.



1.70 mts.

10.70 lux

1.10 mts.

30 mm

800 mm / 0.80 mtr.

50% of lot area

10% of lot area

Inner court

750 mm / 0.75 mtr.

1.20 sqm.

1.50 mts.

1.00 sqm.

3.00 cum.

14.00 cum.

300 sqmm / 0.30 sqm

300 mm

3.00 mts.

0.90 mtr.

1.20 mts.

3.00 mts.



Setback

2.00 mts.

1.20 mts.

12.00 cum.

1.80 mts.

0.30 cum

10% of flr. Area

0.60 mtr.

300 mm

2.40 mts.

2.40 mts.

600 kgs./sqm.

1.00 mtr.

120 kgs./sqm.

0.90 mtr.

2.70 mts.

0.80 mtr.

1.20 mts.

One is to ten (1:10)

250 mm

2.00 mts.




1.20 m

6.00 mts.

2

1.20 mts.

750 mm

5.60 mm

1.20 mts.

900 mm

2.50 mts.

Show window

1.20 mts.

1.00 mtr.

10% of lot area

300 mm

One is to ten (1:10)

2

1.50 mts.

1:125 sqm. Of gross floor area

2.40 X 5.00 mts.

1:10 bedrooms



1:25 beds

60.00 mts.

1:5 classrooms

1:50 sqm. Of spectators' area

4

0.90 mtr.

1.10 X 1.40 mts.

30.00 mts.

1.40 mts.

0.80 mtr.

1.70 X 1.80 mts.

1.60 mts.

3.70 mts.

200 mm

2.10 mts.

6.00 sqm.

2.00 mts.

300 mm

500 mm

0.90 mts.



200 mm

1.10 mts.

750 mm

100 mm

150 mm

300 mm

5 mm

3.00 mts.

1.00 mts.

7

300 mm

480 mm

8.40 mts

one third (1/3)

100 mm

300 mm

250 mm

150 mm

200 mm

4



900 liters/minute

4" (100mm)

5" (125mm)

6" (150mm)

190 liters/minute

2" (50mm)

2 1/2" (63mm)

23.00 mts

6.00 mts.

38 mm (11/2")

1.00 mtr.

5.00 mts.

3.00 mts.

120 days

0.80 mtr.

500 mm

6.00 mts.

1/3 - 1/4


10.00 mts.



7.5 mts.

7.5 mts.

2.50 mts.

1.20 mts.

3,861 sqcms.

3.00 mts.

3.00 mts.

5.50 mts.

277 kgs.

3.00 mts.

28.00 sqm.

18.6 sqm.

9.30 sqm.

1.80 sqm.

5.60 sqm.

3.25 sqm.

2.80 sqm.

8.40 sqm.



46.50 sqm.

28.00 sqm.

0.65 sqm.

1 slot/5 rooms

1 slot/50 sqm. Of spectators' area

1slot/8 units

1 slot/unit

1 slot/4 units

1 slot/100 sqm of gross flr.area

1 slot/unit

1 slot/50 parking slots

1 slot/5 classrooms

1 slot/10 classrooms

1.20 mts.

1:20

1:12

12.00 mts.

1:12

60.00 mts.

1.50 mts.



0.50 mts.

1.10 mts.

0.90 mts.

1.20 mts.

3.70 mts.

0.70 mtr.

6.00 mts.

1.50 mts.

Dwelling unit

Footing

Course

Apartment

Barbecue

Balcony

Chimney connector

Fireplace



Girder

Helistop

Suportales

Vault

Cross wall

18.60 sqm.

1.40 sqm.

0.65 sqm.

120 days / 4 mos.

8.00 mts.

12.00 cum.

3.00 mts.

800 mm / 0.80 mtr.



500 mm

Business and mercantile

Industrial

Residentials, hotels

and apartments.

Storage and hazardous

Institutional

3.50 mts.

1:12

1.80 mts.

Institutional

Residentials, hotels

and apartments.


Industrial

Accessory

1 truck loading slot

60 mts.



20%

1/50 sqm of gross floor area

1/150 sqm of shopping flr area

1/100 sqm of shopping flr area

1/living unit

1/8 living units

1/50 sqm of congregation are

0.60 mtr.

1.00 mtr.

4.50 mts.

4.50 mts.

Accessory


Industrial



1.10 - 1.30 mts.

0.60 - 0.75 mts.

0.70 - 1.20 mts.



0.74 mts.

Safety

4

Magna Carta for Disabled

Persons

Corridor

Curb

0.71 mtr.

2.30 mts.

0.19 mtr.

2.75 mts.



2.00 mts.

0.28 sqm.

4

46.00 mts.

61.00 mts.

0.83 mtr.

14

7

60 cms.

91 cms.

2.00 mts.

56 cms.

112 cms.

3

76 cms.

38 mm.

91 cms.

106 cms.

7.50 mts.

112 cms.

112 cms.



20.3 cms

1floor

55.9 cms.

55.9 cms.

15.25 cms.

30.5 cms.

22.9 cms.

3.66 mts.

2.13 mts.

1.98 mts.

3

50-300

2

30 mts.

30 mts.

31 mts.

2.5 cms.

91 cms.

1.00 mtr.



76 cms.

1.80 mts.

2.44 mts.

1.83 mts.

112 cms.

112 cms.

4.60 sqm.

Institutional

Assembly

Assembly

Business

Picking rooms.

High rise building

Explosive magazine

Plenum

Fulminate

Phyrophoric



Oxidizing material

Forging

Distillation

Dust

37.8 oC (100 oF)

Class B

Boiling Point

4 hrs.

Duct System

Flash Point

Fumigant

4.50 mts.

1.80 mts.

3.70 mts.

1.50 mts.



15.00 mts.

23.00 mts.

3.00 mts.

9 cms.

71 cms.

20.5 cms.

7 kgs.

112 cms.

76 cms.

20

61 cms.

91 cms.

25 mm

86.5 cms.

37.8 oC (100 oF)

Fire resistance rating



Cryogenic

30.50 mts.

Assembly

Institutional

Business

Industrial

Mercantile

71 cms.

1

1.50 mts.

3.66 mts.

15 mts.

763 cms.

19 cms.

20 cms.

112 cms.

91 cms.

38 mm.

25 mm.

3.70 mts.



112 cms.

112 cms.

76 cms.

10-17%

No limit

3.66 mts.

1.20 mts.

55.9 cms.

55.9 cms.

30.5 cms.

3.66 mts.

23 mts.

Class D

Class A

Dip Tank

Automatic

Fire

Suppression



System

Means of Egress

5.00 mts.

Assembly

Business

1.22 mts.

22.9 cms.

30.5 cms.

25 cms.

60 oC

0.83 mtr.

30 cms.

(1:8) 12.5%

63.5 mm.

1.8 sqm.

76.25 mts.

55 cms.

82 cms.

2.44 mts.



1.83 mts.

465 sqm.

Hotel

Apartment Buildings

3

12

Contract documents phase

Pre-design services

Specialized allied services

10%



10%

50%

85%

PHP 500.00

12%

6%

8%

Architect

3 months

General conditions

Schedule of material and finishes

Quotation

Certificate of payment



Performance bond

Bid

7%

Closed specification

Instruction to bidders

2 months

12 months / 1 yr

30 days

Statute of Limitation

Statutory Bond

Statute of Frauds

Lease

Leasehold

Lessee

Lessor



2-2.5

Multiple of Direct

Personnel Expenses

1

Percentage of Construction Cost

Multiple of Direct

Personnel

Expenses

Percentage of Construction Cost

50 kms.

Professional Fee Plus Expenses

Architect

Letter of transmittal

3

Contractor

1



Owner

Contractor

1-1.5%

1.5-3%

Firm Fixed Price

Fixed Price Incentive

CPIF / CPAF

Cost Plus Fixed Fee

(1/6)

2%

Civil Code

Per Diem+Reimb. Expenses



Payment Bond

Lump Sum / Fixed Fee

2-5%

Project Manager

1

Project Manager

Public / People

PD 223

People / Public

Bid Bulletin

Proposal

Proposal Bond



Special Provisions

Specifications

Written Notice

Work

Install

Furnish

Provide

50%

65%

30%

30%



2.5

12 sqm.

50 / Contractor

Specifications

15 Days

15 Days

90 Days

False (30 days)

False (15 days)

Contractor

1



1

0

10 days

15%

15%

Penalty Clause

5,000 for First 50 Hectares

R.A. 6451

PD 1308

Liens

6%

150%

200 / hr

500

12%

Repetitive Construction



10% of 1st unit

60% 2nd-10th Unit

30% 11th and above

Group 3 (Exceptional Character)

Group 3 (Exceptional Character)

PHP 750.00

Construction Phase Service

5 days

10 days

7th day / Notice to Proceed

Civic Center

Chattel

Reciprocity

Assimilation Exam.xls

Documents

Transcript of Assimilation Exam.xls