Asme Ix Int Vol26
-
Upload
julio-castilhos -
Category
Documents
-
view
745 -
download
20
Transcript of Asme Ix Int Vol26
ASME Boiler and Pressure Vessel Code SECTION- IX
INTERPRETATIONS Volume 26
The interpretations to the Code will be issued twice a year up to the publication of the 1992 Edition of the Code: each July (designated 7/89, 7/90, and 7/91) and with each Addenda (designated A89, ,490, and A91). The Interpretations for each individual Section are published separately and are part of the update service to that Section; Interpretations of Section Ill, Divisions 1 and 2, are part of the update service to Section III, Subsection NCA. Interpretations are not part of the Code or the Addenda.
Interpretations Volumes 18 through 23 were included with the update service to the 1986 Edition of the Code; Volume 24 is the first Interpretations volume to be included with the update service to the 1989 Edition.
Section Vol. 24 Vol. 25 Vol. 26 Vol. 27 Vol. 28 Vol. 29
I 7/89 A89 7/90 I I-A 7/89 A89 7/90 Il-i3 ... ... ... Il-C ... . . . ..I
III-NCA 7/89 A89 7/90 IV 7/89 A89 ... V ... A89 7/90 VI ... . . . ... VI1 ... . . . ... VIII-1 7/89 A89 7/90 Vlll-2 7/89 A89 7/90 IX 7/89 A89 7/90 X ... ... 7/90 XI 7/89 A89 7/90
. ,
Copyright @ 1990 THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
All Rights Reserved TO9010
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^
^#^~
^^":~
::"^$
$^~@
""#:
$@^^
:"^$"
"*~~
$"^^
:@^^
^~~"
:\\
INTERPRETATIONS
NQ. 26 - SECTION IX
Replies to Technical Inquiries July 1, 1989, through December 31,1989
FOREWORD
General Information
This publication includes all written interpretations issued between the indicated dates by the ASME Staff on behalf of the ASME Boiler and Pressure Vessel Committee in response to inquiries concerning interpretations of the ASME Boiler and Pressure Vessel Code. A contents is also included which lists subjects specific to the interpretations covered in the individual volume. These interprefations are not a part of the Addenda or the Code.
The interpretations are taken verbatim from the original letters, except for a few typographical and editorial corrections made for the purpose of improved clarity. In some instances, a review of the interpretation revealed a need for corrections of a technical nature. In these cases, a revised interpretation is presented bearing the original Interpretation Number with the suffix R and the original file number with an asterisk. Following these revised interpretations, new interpretations and revisions to them issued during the indicated dates are assigned Interpretation Numbers in chronological order. Interpretations applying to more than one Code Section appear with the interpretations for each affected Section.
ASME procedures provide for reconsideration of these interpretations when or if additional information is available which the inquirer believes might affect the interpretation. Further, persons aggrieved by an interpretation may appeal to the cognizant ASME committee or subcommittee, As stated in the Statement of Policy in the Code documents, ASME does not "approve," "certify," "rate," or "endorse" any item, construction, proprietary device, or activity.
An interpretation applies either to the Edition and Addenda in effect on the date of issuance of the interpretation or the Edition and Addenda stated in the interpretation. Subsequent revisions to the Code may supersede the interpretation.
For detailed instructions on preparation of technical inquiries to the ASME Boiler and Pressure Vessel Committee, refer to Appendix B.
Subject and Numerical Indexes
Subject and numerical indexes have been prepared to assist the user in locating interpretations by subject matter or by location in the Code. They cover interpretations issued from Volume 12 up to and including the present volume, and will be updated with each volume.
199
. .
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^
^#^~
^^":~
::"^$
$^~@
""#:
$@^^
:"^$"
"*~~
$"^^
:@^^
^~~"
:\\
SECTION IX
Subject interpretation
QW-216 . s.. a , , - 6 . e . -. . a . - -. . * . QW-216.1.. - m . -. a . - * e - a . m * 1. . - - - . . * - . . . a . a . . . . . . . . . QW-301.4.. . . . * . - 9 . . - a . -. -. . . . . . . .
. *. . - - e . - .i. s . . *.i.. ..a... . . . . IX-89-29 IX-89-32
QW-218, Applied Linings.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QW-322fa) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :. . . . . . . . . ......... i.. . . . . . . QW-401.15 and QW-402.4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Welder Qualifications.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . ... . . . . .. .
IX-89-31
IX-89-27 Il(-89-28 IX-89-33
. . .. . . . . . ... 0 . . . . . . . . . . lX-89-30
File No. - EC89-176 BC89-287 EC89-178 EC89-177 EC89-100 EC89-174 \
BC89-175
201
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^
^#^~
^^":~
::"^$
$^~@
""#:
$@^^
:"^$"
"*~~
$"^^
:@^^
^~~"
:\\
Section IX- Interpretations No. 26
Interpretation: IX-89-27
Subject: Section IX, QW-322(a)
Date Issued: October 24, 1989
. File: BC89-1 O0
IX-89-27, IX-89-28
Question: When performance qualifications are extended for a particular welding process to six months by welding with another process, is the welder or welding operator required to be qualified in the other process that he is welding with?
Reply: Yes.
Interpretation: IX-89-28
Subject:
Date Issued: October 24, 1989
Section IX, QW-401 .I 5 and QW-402.4
File: BC89-I 74
Question (I 1: A welder has been qualified with the SMAW process using F-No. 3 eletitrodes for the root pass, and F-No. 4 electrodes for the fill and wash process. Is the F-No. 3 weld deposit for this qualification considered backing for the F-No. 4 electrode weld deposit?
Reply (I): Yes.
Question (2): Is the welder qualified to make the complete weld with the F-No.4 electrode?
Reply (2): Yes, provided backing is used,
203
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^^#^~^^":~::"^$$^~@""#:$@
^^:"^$""*~~$"^^:@^^^~~":\\
-
'ASNE * S E C * I X * I N T VOL*:26 48 aili 0759670 008077[3 i!
1X-89-29, IX-89-30, IX-89-31 Section IX-lnterpretdions No. 26
Interpretation: IX-89-29
Subject: Section IX, QW-216
Date Issued: October 24, 1989
File: BC89-176
Question (I): To qualify a WPS in accordance with QW-216, is it a requirement of Section IX that the electrodes to be used conform to F-No. 71 or F-No. 72 of QW-432.71
Reply (I): No.
Question (2): Is it.acceptable to qualify a WPS in accordance with QW-216 using electrodes with weld metal analysis conforming to A-No. 6, A-No. 8, or A-No. 9 per QW-442 on P-No. 6 and P-No. i base materials?
Reply (2): Yes.
204
Interpretation: IX-89-30
Subject: Section IX, QW-301.4
Date Issued: October 24, 1989
File: BC89-I 77
' Question: In addition to the ranges in QW-452 as required by QW-301.4, is it a requirement to list the values or ranges for all other variables for which the welder is qualified (e.g. Materials Specification, P-Nos., F-Nos., etc.)?
Reply: No, additional information or limitations may be listed at the option of the Manufacturer,
Interpretation: 1X-89-31
Subject:
Date Issued: October 24, 1989
Section IX, QW-218, Applied Linings
File: BC89-I 78
Question: A carbon steel vessel requires the installation of an applied liner due to service conditions. If the weld is completed in such a way that it is essentially two fillet welds and a cover pass, would a weld procedure qualified for groove welding be acceptable?
Reply: No. See QW-218.
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^^#^~^^":~::"^$$^~@""#:$@^^:"^$""*~~$"^^:@^^^~~":\\
. IX-89-32, IX-89-33 . . Section IX- Interpretations No. 26
Interpretation: IX-89-32
Subject: Section IX, QW-216.1
Date Issued: October 24, 1989
File: . BC89-287
Question: Do the requirements of QW-216.1 define the minimum base metal thickness qualified with one PQR or does it impose two PQRs for a procedure if it is the users intent to use it on both components over one inch thick and components less than one inch thick using identical parameters?
Reply: Two PQRs would be required.
Interpretation: IX-89-33
Subject: Section IX, Welder Qualification
Date Issued: October 30, 1989
File: BC89-175
Question: Does the qualification of a welder using EXX 10 and EXX 18 electrode on P-No. i material also qualify him to weld P-No. 4 material with EXX 18 B 2L electrodes?
Reply: Yes.
205
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^^#^~^^":~::"^$$^~@""#:$@^^:"^$""*~~$"^^:@^^^~~":\\
Location
Q-11, 1971 Edition
Edition, Winter 1973 Addenda 9-1 1(5), 1971 Edition, Winter 1973 Addenda
Q-1 l(b)(31, 1971
Part QI3 I . .
QB-141.4 QB-181 QB-201.3 QB-203.1 QB-402.2 QB-402.3 QB-406.1 QB-406.3 QB-408.2
QB-452.1 [Note (111 QB-461 Q6-463 QB-466.3
Part QW QW-100.1
QW-100.3 QW-150 QW-151 QW-151.1 QW-151 .l(d) QW-151.2 QW-151.2(d) QW-153.1 QW-160 QW-162.1
QW-163
QW-181.1 QW-191
QW-191.2.2. QW-l91.2.2(b)(l) QW-191.2.2(b)(3)
Interpretation
IX-83-02 1X-83-41
1X-83-40
IX-86-73 IX-83-76 IX-83-76 IX-86-21 IX-86-62 IX-83-136 IX-83-49 IX-83-118 IX-83-118 IX-86-11 IX-86-22 IX-83-76 IX-86-02 IX-83-76 1X-86-38
IX-83-17 IX-89-03 IX-83-99 IX-83-11 O IX-83-38 IX-89-25 IX-83-119 1x43-120 IX-83-95 IX-89-04 IX-83-156 IX-83-115 IX-86-37 IX-83-60 IX-83-120 IX-86-42 IX-86-61 IX-86-40 IX-83-52 IX-83-142 IX-83-157 IX-83-174 IX-86-62 IX-83-173 IX-83-173
NU M ERICAL
File No. -
BCB1-704 8'32-796
8C82-794
BC86-332 BC83-248 BC83-248 BC86-O58 8C85-292 BC84-398 BC82-871 BC84-183 BC84-183 BC85-420 BC85-531 BC83-248 BC85-292 BC83-248 BC86-298
BC82-422 BC88-166A BC83-472 BC83-692 BC82-771 BC89-O99 BC84-253 BC83-474 BC83-301 BC88-167 8C84-697 BC83-279 BC86-297 BC82-749 8C83-474 BC86-33 1 BC86-515 8C86-329 BC83-O01 BC84-548 BC84-700 BC84-557 BC86-517 BC85-013 BC85-013
Page No.
6 28
-
27
159 44 44
126 113 87 33 78 78
116 126 44
113 44
140
13 182 63 69 26
197 79 79 61
182 98 77
139 38 79
141 153 141 34 89 98
107 153 106 106
INDEX
Location
QW-194.1 QW-200
QW-200.1
QW-200.1 (c)
QW-200.2
QW-200.2(b) QW-200.2(~) QW-200.2(0 QW-200.3 QW-200.4
QW-200.4ia) QW-201
QW-202.2
QW-202.3
QW-202.4
QW-211 QW-214 QW-214.1 QW-216 QW-2 16.1 QW-218 QW-250 QW-251.2 QW-254 QW-256
Interpretation
IX-86-18 IX-86-42 IX-89-17 IX-83-03 1X-89-03 IX-83-54 IX-83-111 IX-83-03 IX-83-72 1X-86-70 1x43647 IX-83-164 IX-83-171 IX-86-06 IX-83-115 1X-83-80 1x4343 1X-86-06 IX-66-08 IX-86-23 1X-86-33 IX-86-01 IX-83-03 IX-83-12 1X-83-25 IX-83-39 IX-83-68 1X-83-151 1X-86-49 IX-83-103 IX-86-74 IX-83-93 IX-83-114 IX-83-160 IX-86-56 IX-89-12 IX-83-123 IX-86-36 IX-86-43 IX-86-89 IX-83-15 IX-86-71 IX-83-48 IX-89-29 IX-89-32 IX-89-3 1 IX-89-11 IX-83-79 IX-83-27 IX-8 6-2 6
File No. -
BC85-585 BC86-331 8'38-473 BC82-O56 BC88-166A BC83-O42 BC84-O01 BC82-O56 BC83-269 8'37-089 BC87-490A BC85-023 BC85-132 BC85-328 BC83-279 BC83-388 BC83-394 8C85-328 BC85-134 BC85-553 BC86-262 BC85-O36 8C82-O56 BC82-341 BC81-160 BC83-792 BC83-O40 8'34-620 BC86-367 8'33-237 BC87-134 BC83-53 1 BC84-O70 8C84-219 BC86-429 BC88-401 BC84-O92 BC86-280 BC86-337 BC88-O89 BC82-388 BC87-O90 8C82-870 BC89-176 BC89-287 BC89-178 BC88-399 BC83-358 8'32-71 3 BC86-O59
Page No.
125 141 193
7 182 35 70 7
43 157 175 103 105 115
77 50 53
115 116 127 138 113
7 11 16 26 . 41 96
144 65
165 56 71
1 O0 146 187 80
139 142 176
13 157 32
204 205 204 186 50 17
129
-
Cumulative Index - Interpretations Vols. 12-26 ia)
. . . .. Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^^#^~^^":~::"^$$^~@""#:$@^^:"^$""*~~$"^^:@^^^~~":\\
Location
Part QW (Cont'd)
QW-281.2(e)
QW-282.6(m)
QW-Zf31.2(~)
QW-282
QW-283 QW-300
QW-300.1
QW-300.2
QW-301
QW-301.1 QW-301.2
QW-301.4
QW-302.2
QW-303.1
QW-304
QW-304.1 QW-306
QW-3 10.1 QW-310.4 QW-310.5(~)
QW-311 (New QW-381)
QW-3ll ia) QW-312ía) QW-320 QW-321 QW-321.2(a) QW-322
Interpretation
IX-86-59 IX-83-129 IX-83-125 IX-83-09 IX-89-22 IX-83-2 1 IX-86-25 IX-86-05 IX-86-24 IX-86-25 IX-83-133 IX-83-151 IX-86-64 IX-89-1 O IX-83-103 IX-86-69 IX-83-153 IX-83-31 1X-83-149 IX-83-32 IX-83-163 IX-U6-13 IX-06-90 IX-89-30 IX-86-34 IX-86-79 IX-83-98 IX-83-155 IX-86-74 IX-83-19 IX-83-57 1X-83-91 IX-83-108 IX-86-85 IX-83-128 IX-83-83 IX-83-107 IX-86-23 IX-86-35 IX-83-42 1X-83-70 IX-83-101 IX-83-121 IX-83-132 IX-83-162 IX-86-27 IX-83-101 IX-83-134 IX-86-24 IX-83-13 IX-86-79 IX-83-58 IX-83-113 IX-83-117 IX-83-124 IX-83-128 IX-83-154 IX-83-166 IX-83-167 IX-83-170 IX-86-07 IX-86-19 IX-86-50
File No. -
BC86-458 BC84-251 BC84-151 BC82-279 BC89-O94 BC82-499 BC86-O18 BC85-306 BC86-O01 BC86-O18 8C84-370 BC84-620 BC86-395 BC88-398 BC83-237 BC87-O88 BC84-664 BC82-395 8C84-558 8C82-598 BC85-O22 BC85-507 BC88-O91 8C89-177 BC86-265 BC87-140 BC83-450 BC84-692 BC87-134 8C82-440 BC83-O79 BC83-528 BC83-639 BC87-492 8C84-226 8C83-394 BC83-550 BC85-553 BC86-266 8C83-803 BC83-270 BC83-529 BC84-134 BC84-366 BC84-663 BC86-O61 BC83-529 BC84-396 8C86-O01 BC82-346 BC87-140 BC83-O86 BC84-O55 BC84-133 BC84-149 BC84-226 BC84-689 BC85-030 8C85-O31 BC85-O91 BC85-560 BC85-587 8C86-309
Page No.
~
152 84 81 10
195 15
128 114 128 128 86 96
154 186 65
156 97 19 95 19
102 118 176 204 138 167 63 98
165 14 37 56 68
174 83 53 67
127 139
28 42 64 80 85
102 129 64 86
128 12
167 37 71 78 81 83 97
104 104 105 115 129 144
Location
Q W-3 2 2 (a)
QW-350 QW-351
QW-355
QW-356
QW-360 QW-381
QW-383 QW-400 QW-401.15 QW-402.3 QW-402.4 QW-402.5 QW-402.6 QW-402.1 O
QW-402.11 QW-403
QW-403.1
QW-403.5
QW-403.6
QW-403.8
QW-403.9 QW-403.11
QW-403.16 QW-403.18
QW-404
QW-404.4
QW-404.5
interpretation
IX-83-150 IX-83-159 IX-83-164 IX-86-52 IX-86-81 IX-86-82 IX-89-27 IX-86-51 IX-83-55 IX-83-77 IX-83-143 IX-89-02 IX-86-12 IX-86-46 IX-79-52R IX-83-116 IX-86-68 1X-86-68 IX-86-27 IX-86-58 1x46-66 IX-86-71 IX-8 6-3 2 IX-83-82 IX-89-28 IX-86-54 IX-89-28 IX-86-54 IX-83-04 IX-83-04 IX-83-71 IX-86-80 IX-83-20 IX-83-116 IX-83-45 IX-89-14 IX-83-92 IX-83-135 IX-86-15 IX-86-75 IX-86-78 IX-89-23 IX-89-26 IX-83-148 IX-89-07 IX-83-97 IX-83-127 IX-83-152 IX-83-11 IX-83 -3 5 IX-83-56 IX-06-75 IX-89-20 IX-83-106 IX-83-137 IX-86-41 IX-83-37 IX-86-03 lX-86-65 IX-86-76 IX-83-1 O IX-83-87 IX-83-176 IX-83-140R
File No. -
BC84-617 BC84-690 BC85-O23 BC86-394 BC87-242 8C87-252 8C89-1 O0 BC86-390 BC83-O59 8C83-253 BC84-581 8C88-O90 8C85-482 BC86-219 BC79-046' 8C84-O54 BC87-O39 BC87-O39 BC86-O61 BC86-457 8C87-O36 BC87-090 8C86-222 BC83-303 BC89-174 BC86-400 BC89-174 8686-400 BC82-O98 8C82-O98 8C83-230 BC87-253 8C82-496 BC84-054 8C82-385 BC88-403 BC83-530 8C84-397 8C85-532 8C87-136 BC87-139 BC89-096 BC89-103 BC84-417 BC88-171 8C83-444 0C84-224 8C84-648 8C82-300 8C82-599 BC83-078 BC87-136 BC88-478 BC83-630 BC84-399 BC86-330 BC82-770 BC85-293 BC87-O3 1 A 8C87-137 BC82-299 8C83-340 BC85-O88 BC84-250*
Cumulative index - Interpretations Vols
Page NO.
96 99
103 145 173 173 203 145 36 49 89
181 117 143 49 77
156 1.56 129 152 155 157 138 52
203 146 203 146
8 8
43 167
14 77 30
187 56 87
123 165 166 196 197 95
184 62 83 96 11 25 36
165 194 67 87
141 26
114 155 166 10 54
107 137
1 2-26
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^^#^~^^":~::"^$$^~@""#:$@
^^:"^$""*~~$"^^:@^^^~~":\\
Location
Part QW (Cont'd)
QW-404.9
QW-404.13
QW-404.14 QW-404.22 QW-404.28 QW-404.30
QW-404.32 QW-405.1
QW-405.2 QW-405.3
QW-406.1 QW-406.1 QW-406.2 QW-407
QW-407.1
QW-407.1 (b)
QW-407.2
QW-407.4
QW-408 QW-408.3 QW-408.8 QW-408.9
QW-409 QW-409.1
QW-409.8 QW-410.7 QW-410.9 QW-410.15
QW-410.25 QW-410.26 QW-416
QW-422
QW-423
Cumulative Index
Interpretation
IX-86-57 IX-86-84 IX-83-46 IX-83-59 IX-83-61 IX-83-84 IX-83-96 IX-83-169 IX-83-06 IX-83-47 IX-83-97 IX-83-1 O0 IX-83-89 IX-83-22 IX-83-1 O 0 IX-89-20 IX-89-24 IX-83-112 IX-89-20 IX-89-24 lX-83-50 IX-83-177 I X-86-8 6 IX-83-161 IX-83-165 IX-83-161 IX-83-130 IX-86-04 IX-86-20 IX-86-76 IX-83-29 IX-83-30 IX-81-3 TR IX-86-47 IX-83-29 IX-83-86 IX-83-145 IX-83-11 IX-83-35 IX-86-23 IX-89-16 IX-86-67 IX-83-168 IX-83-146 IX-86-67 IX-83-26 IX-83-33 IX-83-175 IX-89-19 IX-86-55 IX-86-60 IX-86-44 IX-86-63 IX-83-69 IX-86-26 IX-86-72 IX-86-86 IX-83-34 IX-83-13 1 IX-86-88 IX-89-14 IX-86-17 IX-89-15
File No. -
BCB6-263 8C87-491 BC82-751 BC82-614 BC82-831 BC83-398 8C83-442 BC85-O89 BC82-245 BC82-790 BC83-444 BC83-563 BC83-402 8C82-516 BC83-563 ß C 8 8 - 4 7 8 8C89-O97 BC84-038 0C88-478 8C89-097 BC82-872 BC85-O92 8C87-494 BC84-618 BC85-O24 8C84-618 8C84-252 8C85-304 BC86-O1 O BC87-13 7 8C82-763 BC82-243 BC82-097' 8C86-223 BC82-763 BC83-294 8C84-584 BC82-300 BC82-599 8C85-553 8C88-405 BC87-O38 8C85-O59 8C84-619 8C87-O38 8C82-182 BC82-617 BC85-O38 B C 8 8 - 4 7 6 BC86-426 BC86-514A BC86-365 BC86-520 8C82-233 BC86-O59 BC87-O91 BC87-494 8C82-514 BC84-365 BC88-O41 BC88-403 BC85-554 BC88-404
Interpretations Vols. 12-26
Page No. -
151 174 31 37 39 53 62
105 9
32 62 63 55 15 63
194 196 70
194 196 33
108 175 1 o1 103 101 84
114 125 166
18 18 5
143 18 54 90 11 25
127 188 155 104 90
155 17 19
107 194 146 152 142 154 42
129 158 175 25 85
176 187 124 183
Location
QW-424
QW-432
QW-450 QW-450 VS QW-461 QW-45 1
QW-451.1
QW-451.3 QW-452
QW-452.1
QW-452.3
QW-461.1 (a) QW-461.9
QW-462 QW-462.1 QW-462.l(a)
QW-462.1 (d) QW-462.l(e) QW-462.3(a) QW-462.3(b) QW-463.l(b) QW-463.2(@ QW-466 QW-466.1
Interpretation
IX-89-05 IX-89-26 1X-83-24 IX-80-52R IX-83-14 IX-83-78 IX-83-01 IX-83-05 IX-83-08 IX-83-36 IX-83-64 IX-83-104 IX-83-105 IX-83-141 IX-83-177 IX-86-31 IX-89-07 IX-83-18 IX-83-43 IX-83-81 IX-83-88 IX-83-94 IX-83-102 IX-83-122 IX-86-36 IX-86-48 IX-89-18 IX-86-40 IX-83-07 IX-83-16 IX-83-67 IX-83-104 IX-86-30 IX-86-39 IX-89-02 IX-83-66 IX-83-88 IX-83-90 IX-89-06 IX-89-21 IX-83-22 IX-83-23 IX-83-66 IX-83-158 IX-86-29 IX-89-09 IX-83-65 IX-83-28 IX-83-44 IX-83-53 IX-83-134 IX-86-29 IX-86-09 IX-83-11 O 1X-86-45 IX-89-25 IX-83-139 IX-83-95 IX-83-144 IX-83-144 IX-83-15 IX-83-75 lX-83-51 IX-83-73
File No. -
BC88-168 BC89-103 BC82-588 BC80-435* BC82-302 BC83-300 BC81-702 BC82-237 BC82-265 BC82-757 BC83-222 BC83-349 BC83-471 8C84-434 BC85-O92 BC86-1 O1 BC88-171 8C82-423 BC82-822 BC83-395 BC83-396 BC83-284 BC83-551 BC83-645 BC86-280 BC86-281 BC88-474 BC86-329 BC82-246 BC82-396 BC83-123 BC83-349 BC86-104 BC86-299 BC88-O90 BC83-O58 BC83-396 8 C 8 3 - 4 O 7 BC88-169 BC89-O3 1 BC82-516 8C82-530 BC83-O58 BC84-368 8C86-103 8C88-397 BC83-225 BC82-748 BC82-838 BC83-O02 BC84-396 8C86-103 BC85-200 8C83-692 BC86-366 BC89-O99 BC83-629 8C83-301 8C84-583 BC84-583 BC82-388 8C83-149 BC83-881 BC82-866
Page No. - 188 197
16 49 12 50
5 8
10 25 40 66 66 89
108 137 184
14 29 51 54 61 65 80
139 143 193 141
9 13 41 66
131 140 181 41 54 55
183 195
15 15 41 99
130 185 40 18 29 35 86
130 116 69
142 197 88 61 90 90 13 44 34 43
(C)
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^
^#^~
^^":~
::"^$
$^~@
""#:
$@^^
:"^$"
"*~~
$"^^
:@^^
^~~"
:\\
Location Interpretation
Part QW (Cont’d) IX-83-74 IX-83-115
QW-46 6.3 IX-83-1 O9 IX-86-3 7
QW-482 IX-86-14 ix-89-01
QW-483 IX-86-14 IX-66-70
QW-484 IX-83-53 QW-492 IX-86-16
File No. -
BC82-867 BC83-279 8C83-689 8‘36-297 8C85-483 BC88-O42 BC85-483 BCO7-O89 BC83-002 BC85-533
Page No. -
44 77 68
139 123 181 123 157 35
124
Cumulative Index - Interpretations Vols. 12-26
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^^#^~^^":~::"^$$^~@""#:$@
^^:"^$""*~~$"^^:@^^^~~":\\
SU BJ ECT INDEX
Subject Interpretatio
Base Metals P-Number substitution ......................................................... 1X-83-20
lX-83-56 1X-83-96 IX-86-17 IX-86-18 1X-89-29
qualifying for notch toughness ................................................ IX-83-92
use of as filler metal .......................................................... 1x433437
Brazing Procedure Qualification for attaching small penetrations.. ............................................. 1X-86-73 qualification by proof test ..................................................... IX-86-53
Brazing Procedure Specification requalification of ............................................................... 1X-86-22
Certification of the PQR.. ................................................................... 1X-83-03 of the WPS.. ................................................................... IX-83-03
Consumable Inserts performance quaiification ...................................................... IX-83-06
qualifying viewing windows ................................................... IX-83-104
Cover Pass remelting of .................................................................... 1X-83-89
Diameters, Pipe performance qualification.. ................................... .:. .............. 1X-83-55 ranges listed on the WPS ..................................................... IX-83-44
Dust amount in powdered filler metal.. ............................................ IX-83-09
Essential Variables (See Variables)
IX-86-48
1X-83-22
F-Numbers change in. ...................................................................... IX-83-10
1X-89-28 ciassification of martensitic materials ......................................... 1X-83-24 use of electrodes to conform F-No.. ......... ,...ii. ......................... IX-89-29
Filler Materials (See also SFA Specifications) change in electrode classification ............................................. 1X-83-84 change in wire classification .................................................. IX-83-84
chemical analysis of weld deposit.. .......................................... IX-86-57 electrode spacing ............................................................... IX-86-44
IX-83-169
Cumulative -,index - Interpretations Vois. 12-26
File No.
BC82-496 BC83-078 BC83-442 BC85-554 8C85-585 BC89-176 8C83-530 BC86-281 BC83-340
BC86-332 BC86-399
BC85-531
BC82-O56 BC82-O56
BC82-245 BC82-516 BC83-349
BC83-402
BC83-O59 BC82-838
BC82-279
BC82-299 BC89-174 BC82-588 8C89-T76
BC83-303 803-398 BC85-O89 8'36-263 BC86-365
- Page O. -
14 36 62
124 125 204
54 143 56
159 145
126
7 7
9 15 66
55
29 36
10
i o 203
16 204
53 53
105 151 142
(e)
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^^#^~^^":~::"^$$^~@""#:$@^^:"^$""*~~$"^^:@^^^~~":\\
Subject Interpretation
Filler Materials (Cont'd) nonferrous ...................................................................... IX-83-176 qualifying as a welded buildup ............................................... IX-83-114 without SFA specification ...................................................... IX-86-03
Flux active/neytral ................................................................... IX-86-16
Interpass Temperatures listing of on the WPS ......................................................... IX-83-41
- IX-83-161 qualification of ................................................................. IX-83-41
IX-83-129
Multiprecess Welds qualified thickness range for performance qualification ..................... qualified thickness range for procedure qualification ........................ required test specimens for procedure qualification ......................... root pass without backing ..................................................... with notch-toughness requirements ........................................... IX-83-33
ranges for ....................................................................... IX-83-04
IX-83-14 1x433433 IX-83-01 IX-89-01
Nonessential Variables (See also Variables)
Normalized Materials qualified by non-normalized materials ........................................ IX-83-86
Nozzle Joint Design base metal thickness ........................................................... IX-86-31
Operational Control change in company name ..................................................... IX-83-25 contractor's associations ....................................................... IX-83-68 of welding procedures ......................................................... IX-83-03
IX-83-151 IX-86-64
organizations not involved in Code applications., ........................... IX-83-39
Performance Qualification A-number substitution .......................................................... IX-86-84
IX-89-29 IX-86-25 1X-86-81
change in angle groove ....................................................... IX-86-69 consumable inserts ............................................................. IX-83-06
corrosion-resistant weld metal overlay ........................................ IX-86-32
by several contractors simultaneously ........................................
IX-83-22
IX-86-58 IX-86-66
diameter limitation ............................................................. IX-89-09 effective operational control of ............................................... IX-89-1 O fillet welds ...................................................................... IX-83-04
IX-83-103 1x4628 IX-83-16 IX-83-98 IX-86-74 IX-89-3 1
fillet welds qualified by groove welds ........................................
F-Number qualification ......................................................... IX-79-52R
further training ................................................................. IX-83-13 IX-80-52R
groove welds. .................................................................. IX-83-16 . IX-89-20
maintenance of ................................................................. 1x4642
File No .
BC85-088 BC84-O70 B€85-293
BC85-533
BC82-796 BC84-618 BC82-796 BC84-251
BC83-302 BC83-394 BC81-702 BC88-O42 BC82-617
BC82-O98
BC83-294
BC86-101
BC81-160 BC83-O40 BC82-O56 BC84-620 BC86-395 BC82-792
BC87-491 BCB9-176 BC86-O18 BC87-242 BC87-O88 BC82-245 BC82-516 BC86-222 BC86-457 BC87.036 . BC88-397 BC88-398 BC82-O98 BC83-237 BC86-062 BC82-396 BC84-450 BC87-134 BC89-178 BC79-046* BC80-435* BC82-346 8C82-396 BC88-478 BC87-252
Page No .
107 71
114
124
28 1 o1 28 84
12 53
5 181
19
8
54
137
16 41
7 96
154 26
174 204 128 173 156
9 15
138 152 155 185 186
8 65
130 13 63
165 204 49 49 12 13
194 173
(0 Cumulative Index . Interpretations Vols . 12-26
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^^#^~^^":~::"^$$^~@""#:$@^^:"^$""*~~$"^^:@^^^~~":\\
Subject Interpretation
Performance Qualification (Cont'd) manual/machine welding substitution ......................,.... ............... 1X-86-68 multiprocess . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . 1X-83-14
IX-83-107 IX-86-13 1X-86-23 1X-86-39
operator variables.. .. . . .. , . . . . . . . . . . . . . , . . , . . . . . . . . . . . . . . . . . - .. . . . . . . . , . . . . . , . . IXz83-163
partial-penetration groove welds .. . . . . . . , . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . , 1X-83-155 P-Number substitutions .. . . . . . . , . . . . . . . . . , , , , . . . . . .. . , . . . .... .-... .... ...... . . 1X-83-40
1X-86-05
1X-83-42 1X-83-63 1X-83-70 IX-83-116 IX-83-137 IX-86-17 IX-86-18 1X-86-41 1X-86-51 IX-86-72 IX-89-15 1X-89-33
position ,. .. . , . , , . . . . . . . . . .. . . . .. . . . ... . . . . . .. . . . .. . . . . . . . . . . . . . . . . . . . . . .. . . .. . . . IX-83-28 IX-83-108 1X-83-162 IX-83-170 IX-83-177 1X-86-29 1X-86-30 1X-86-35 IX-89-24
process substitution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . , . 1X-86-46 questioning of ability. .. .. . . . . . . . .. . . . . . .. . .. . . ,.. .. .. . . . . . . . . . . . . .. . . . .. . .. . . . . IX-86-24 recording information on WPQ . . .. . . . . .. . . . . . . . . . . . . . . . . . . -. . . , . . . . . . . . . . . . . . lx-86-13
1X-86-72 IX-89-30
renewal of.. . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . , , . . . , . . . , . IX-83-154 IX-83-159 IX-83-164 IX-83-166 IX-83-167 IX-86-07 IX-86-19 IX-86-50 1X-86-52 IX-89-27
requalifying for Addenda changes.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..... i.. . . . . lx-83-112 responsibility for.. , . . . . . . . . . . . . . . . . . . . . . , . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IX-83-21
IX-83-100 , IX-83-1 O1 IX-83-106 IX-83-113 IX-83-117 IX-83-121 IX-83-124 IX-83-128 IX-83-131 IX-83-132 IX-83-133 IX-83-134
test specimen movement . . . . . . .. . . . .. . . . . . , . . . . .. . , . . . . . . . . . . .. . . . . .. .. . . . . . . , IX-86-77 thickness limitation.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1X-83-90
1X-83-158
Cumulative Index - Interpretations Vols. 12-26
File No.
BC87-O39 BC82-302 BC83-550 BC85-507 BC85-553 BC86-299 BC85-022 BC85-306 804-692 BC82-794 BC82-803 8C83-122 BC83-270 BC84-O54 BC84-399 BC85-554 BC85-585 BC86-330 BC86-390 BC87-O91 BC88-404 BC89-175 BC82-748 BC83-639 BC84-663 BC85-O91 BC85-O92 BC86-103 BC86-104 BC86-266 BC89-O97 BC86-219 BC86-O01 BC85-507 BC87-O91 BC89-177 BC84-689 BC84-690 BC85-O23 8C85-O30 8C85-O31 BC85-560 BC85-587 BC86-389 8'36-394 BC89-1 O 0 BC84-038 BC82-499 BC83-563 BC83-529 BC83-630 BC83-O55 BC84-133 BC84-I 34 BC84-149 8034-226 BC84-365 BC84-366 BC84-370 BC84-396 BC87-138 BC83-407 BC84-368
Page No.
156 12 67
118 127 140 102 114 98 27 28 40 42 77 87
124 125 141 145 158 188 205
18 68
102 105 108 130 131 139 196 143 128 118 158 204 97 99
103 104 104 115 125 144 145 203
70 15 63 64 67 71 78 80 81 83 85 85 86 86
166 55 99
(g)
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^
^#^~
^^":~
::"^$
$^~@
""#:
$@^^
:"^$"
"*~~
$"^^
:@^^
^~~"
:\\
Subject
ASME *SEC*IX*INT VOL*2b 90 W 0759b713 013813979 9 W
Interpretation
Performance Qualification (Cont'd) IX-89-02 1X-89-24 IX-89-32
using radiography ... .. ,. .... ,. .. .. .,.. ..... ..... ..... ....... ... .... .. ..... ..... lX-83-T9 IX-83-52 IX-83-57 1X-83-91 IX-83-142 IX-83-173
- IX-83-174 1X-86-34 1X-86-79 IX-86-85 IX-89-21
welderloperator identification . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . IX-83-138 welding of joint by more than one welder., . . . .. . . . . . . . . . . . . . . .. . ,. . . .. . . . . IX-89-06 when welding PQR coupon., . . , . . . . . . . . . . . . . . . . . . . . , . , . , . . . . . . . . . . . . . . . . . . . . . IX-83-3 1
with a tube end gun ,.............. ..... .. ...... .. .. ... .... . .. .... .... ....... . IX-83-67 with/without backing .. . . . . . . . . , . . . . . , . . . , . . . . . . . . . . , , . . . . . .. . . . . . . . . . . . . . . . , . . IX-83-168
1X-86-90
1X-86-23
P-Numbers chemical analysis/mechanical properties of . , , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IX-86-88 classification of., .. . . . , . . . , .. . , , .. . , , , . . . . .. . . . . . . . . . . . . .. .. . . , . . . . . .. . . .. . . . . . . IX-83-156 welding of non-pressure retaining attachments.. . . . , . . . . . . . . , . . . . . . . . . . . . . . . . IX-89-05
Positions, Brazing qualification of flow positions ,. .. , . . . . . . . . . . . . . . . . .. , . , . . . . . . . . . . . . . . . . . . , . .. . IX-86-02
Positions, Welding fillet welds in vertical-up progression. .. ... . . . . .. ... . . . . . . . . . . . . . . . . . . . . . . . . . . . 1X-83-82 listing on the WPS ............................................................. IX-83-44 qualification of 2C position . . . . . . . , , . . . . . . . . . . . . . . , . . , . . . . . . . . . . . . . . . . , . . . . . . . IX-83-75 recording welder qualification for.. . . . . . . . . .. ... . . . . . , . . . , . . . , . . . . . . . . . . , . .., IX-83-53 vertical-up progression .. . , , . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . , . . . . 1X-83-50
IX-86-86
Postweld Heat Treatment addition of.. . . . . . . . . . . , . . . , . , . . . , . . , . . . . . . . . . . . . . . . . . . .. . . .. . . . .. . . . . . . . . . . . , . .. IX-86-47 change in soaking time.. . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . , . . . . IX-83-130 limit on maximum time .... . . . , . . . . . . . . . . . . . . . . . . . . . . . . .. .. . . . .. . . .. . . , . . . . . . . 1X-83-145 temperature ranges.. . . . . , . . . . . . . . . , . . . . . . . , . . . , , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IX-81-30R
transformation temperatures . , . , . . . . . . . , , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IX-83-11 IX-83-30
IX-86-23 IX-86-76
versus post heating ...... .....,.. .. ,. ....... ...... .. .. ... ......... ... ...... .... 1X-83-29
when lower critical temperature has been exceeded.. . . . . . , . . . . . . . . . . . . . . . . IX-83-35 IX-86-20
Preheat Temperature maintenance of ... . . . .. . , . . . , . . . .. . .. . . . . . . . . . . . , . . . . . . . . . . . . . .. . .. . . . .. . . . . . . . . IX-83-82
IX-83-161
Procedure Qualification impact testing . . . . . . . , . , . . . . . . . . , . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IX-89-23
Procedure Qualification Record additions/corrections to.. . . . . . . . , . . . . . . . . . . . . . . . , . . . . . . . . . . , . . . . . . . . . . . . . . . . . . . IX-83-171 certification of.. . , . , . . . . . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . , . . IX-83-03 combining PQRs . . . . . . . . . .. . . . . . , . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . , . . . IX-83-47
IX-86-15
File No.
BC88-O90 BC89-O97 BC89-287 BC82-440 BC83-O01 BC83-O79 BC83-528 8C84-548 BC85-O13 BC84-557 BC86-265 BC87-I40 BC87-492 BC89-031 N184-058 BC88-169 BC82-395 8C88-O91 BC83-123 BC85-O59 BC85-553
8C88-041 BC84-697 BC88-168
BC85-292
8C83-303 BC82-830 BC83-149 BC83-002 BC82-872 8C87-494
BC86-223 BC84-252 BC84-584 BC82-097* 8C82-243 BC82-300 BC85-553 BC87-137 BC82-763 BC86-O1 O BC82-599
8C83-303 BC84-618
BC89-096
BC85-132 BC82-O56 BC82-790 BC85-532
Page No.
181 196 205
14 34 36 56 89
106 107 138 167 174 195 88
183 19
176 41
104 127
176 98
183
113
52 29 44 35 33
175
143 84 90
5 18 11
127 166
18 125 25
52 101
196
105 7
32 123
íh) Cumu ...tive index - Interpretations . As. 12-26
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^
^#^~
^^":~
::"^$
$^~@
""#:
$@^^
:"^$"
"*~~
$"^^
:@^^
^~~"
:\\
Subject . Interpretation
Procedure Qualification Record (Cont'd) information on .................................. :. ...................... P . , .... IX-66-70
listing of backing. .............................................................. IX-86-33 listing of preheat temperature.. ............................................... IX-83-165 meeting requirements of older editions.. ..................................... IX-83-99
notch toughness testing.. ...................................................... IX-86-75
recording test results.. ............................................... L.. ....... IX-83-26
IX-89-16
IX-83-148
IX-86-78
IX-83-139 IX-83-172 IX-83-175
Process definition of .................................................................... 1X-83-58 performance qualification ...................................................... IX-83-69 variables for .................................................................... IX-86-12
Qualified Thickness Range performance
for different positions ........................................................ IX-83-23
for dissimilar base metal thicknesses.. ..................................... IX-83-123 for pipe ...................................................................... IX-83-66
for weld overlays ............................................................ IX-83-101
weld reinforcement,. ........................................................ IX-63-07
IX-66-30
IX-86-29
IX-86-27
IX-83-143 procedure
changes in later editions .................................................... IX-83-88 effect of PWHT ............................................................. IX-63-11 for brazed laps .............................................................. IX-83-49
for cladding .................................................................. IX-83-48 for double-bevel groove welds ............................................. IX-63-90 for dissimilar base metal thickness ......................................... IX-86-89 for multiprocess procedures.. ............................................... IX-83-83
for weld repair .............................................................. IX-83-93
IX-86-21
IX-83-126
IX-83-126 1X-83-141 IX-86-28
impact testing., .............................................................. IX-83-81 limitation when using CMAW-S ............................................ IX-83-18 limitations for combined procedures ....................................... IX-83-60 limitations of QW-451 ...................................................... IX-83-102
IX-83-152 IX-86-36
minimum for weld metal ................................................... IX-83-81 ranges qualified by PQR ..................................................... IX-83-36
1x4344 IX-69-11
thickness for determining weld reinforcement ............................. IX-63-05 IX-83-06
thickness used to determine range ......................................... IX-83-94 IX-86-43
. IX-89-18
Records (See also Procedure Qualification Record) maintenance of performance qualification .................................... IX-83-32
Cumulative Index - Interpretations Vols. 12-26
File No.
BC87-O89 8C88-405 BC82-262 BC85-O24 BC83-472 BC84-417 BC87-136 BC87-139 BC82-182 BC83-629 BC85-135 BC85-038
BC83-O86 8C83-233 BC85-482
BC82-530 BC86-104 BC84-O92 8C83-O58 BC86-103 BC83-529 BC86-O61 8'32-246 BC84-581
BC83-396 BC82-300 BC82-871 BC86-O58 BC82-870 8'33-407 BC88-O89 BC83-394 8'34-221 BC83-531 BC84-22 1 BC84-434 BC86-O62 BC83-395 BC82-423 BC83-388 BC83-551 BC84-648 BC86-280 BC83-395 8C82-757 BC83-222 BC88-399 BC82-23 7 BC82-265 BC83-2 84 BC86-337 BC88-474
8C82-598
Page No.
157 188 138 103 63 95
165 166
12 88
106 107
37 42
117
15 131 80 41
130 64
129 9
89
54 11 33
126 32 55
176 53 82 56 82 89
130 51 14 50 65 96
139 51 25 40
186 8
10 61
142 193
19
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^
^#^~
^^":~
::"^$
$^~@
""#:
$@^^
:"^$"
"*~~
$"^^
:@^^
^~~"
:\\
Subject __.
Interpretation
Root Gap
use of term. .................................................................... IX-83-04 qualification of ................................................................. IX-83-71 .
SFA Specifications AWS classification change ..................................................... change of designations in a classification .................................... change of electrode classification ............................................. Chemistry deviation ............................................................ electrode spacing .............................................................. 7 heat treatment conditions., .................................................... use of ........................................................................... use of different electrode brands .............................................
IX-83-147 IX-83-59 lX-83-61 IX-89-13 IX-89-08 IX-86-63 IX-83-46 IX-83-27 IX-86-65
Shielding Gases procedure qualification using .................................................. IX-83-02
SI Units use of., ......................................................................... 1x43435
Supplementary Essential Variables (See also Variables) qualifying changes in .......................................................... lX-83-79
IX-83-122 IX-83-135
Test Specimens acceptance criteria for bend specimens ...................................... IX-83-60
IX-83-115 IX-86-61
acceptance criteria for section .test ........................................... IX-83-76 IX-83-120
bending of ......................................................................
cold straightening of ........................................................... determining coupon thickness .................................................
brazing joint clearance ......................................................... calibration of testing machines ................................................
dimensions recorded on PQR ................................................. failure of ........................................................................ for multiprocess welds ......................................................... for peel or section tests ....................................................... grinding of overlay specimens ................................................. mandrel size ....................................................................
lX-83-51 IX-86-11 1X-83-109 IX-83-60 IX-83-77 IX-83-78 IX-83-143 IX-83-26 1X-83-144 IX-83-153 IX-86-09 IX-83-43 IX-83-76 IX-83-60 IX-83-74 IX-86-71
method of restraint ............................................................ 1X-86-37
nondestructive testing of., ..................................................... 1x4643 product form ................................................................... IX-86-40
reduced section ................................................................ IX-83-65
removal ......................................................................... IX-83-15
roll planishing .................................................................. IX-86-26 size of specimen required. .................................................... 1X-83-38
IX-86-38
1X-69-07
IX-89-25
IX-83-119
IX-83-73 IX-86-45
using radiography .............................................................. IX-83-157
visual requirements ............................................................. IX-83-149 IX-86-62
Ci) Cumulativ
File No .
BC83-230 BC82-O98
BC84-249 BC82-614 BC82-831 BC88-402 BC88-172 BC86-520 8C82-75 1 BC82-713 BC87-O3 1 A
BC81-704
BC83-O03
BC83-358 BC83-645 BC84-397
BC82-749 BC83-279 BC86-5 1 5 BC83-248 BC83-474 BC82-881 BC85-420 BC83-689 BC82-749 BC83-253 BC83-300 BC84-581 BC82-182 8'34-583 BC84-664 BC85-200 BC82-822 BC83-248 BC82-749 BC82-867 BC87-O90 BC86-297 BC86-298 BC87-489A BC86-329 BC88-171 BC83-225 BC89-O99 BC82-388 BC84-253 BC86-059 BC82-771 BC82-866 BC86-366 BC84-700 BC86-517 BCB4-558
Page No .
43 8
95 37 39
187 185 154 31 17
155
6
53
50 80 87
38 77
153 44 79 34
117 68 38 49 50 89 17 90 97
116 29 44 38 44
157 139 140 174 141 184 40
197 13 79
129 26 43
142 98
153 95
Index . Interpretations Vols . 12-26
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^^#^~^^":~::"^$$^~@""#:$@
^^:"^$""*~~$"^^:@^^^~~":\\
ASME * S E C * I X * I N T VOL*26 70 E 0757670 8880982 '1 m
Subject Interpretation
Unlisted Materials (Non-Code Material) A-Number classification.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . , . . . , . . IX-83-140R P-Numbers for . . . , . . . . . . . . . . . . . , . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . .. . IX-83-34
IX-83-62 IX-83-115 IX-83-13 1
qualification of .. .. .... .. .. ... .. .. . .. .. ,. ....... ,. ... , ..... .. ...... ..... .. ...... IX-83-45
SAW f luxhire combinations.. .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . , . IX-83-46 use of filler metais. I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . . . . . . . . .. . . .. . . . .. . IX-83-25
IX-83-136
- 1X-86-76
Variables changes to the WPS ........................................................... IX-83-54 flexible welding back-up tape.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IX-86-80 listing on the WPS ............................................................. IX-83-03
ranges demonstrated on the PQR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IX-83-40 recording on the PQR.. . . . . . . . . . . . . . . . . .. . .. . . . . , . . . . . . . . . . . . . _. . . . . . . . . . . . , . . IX-83-26
IX-86-14
Welder Qualification (See Performance Qualification Testing)
Welding Operator Qualification (See Performance Qualification Testing)
Welding Procedure Specification certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . changes in ......................................................................
combination of processes.. . . . , . . . . . . . . .. . . . . . . . . .. . . . . . , . . . . , . . . . .. . . . . . .. . . . .
combining of ................................................................... for corrosion-resistant weld metal overlay.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . for weld repairlbuildup.. . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . , . . . . information recorded on. ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . :. .
qualification, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . , . . . . . . . . . . . . . . , . . requalification of . . . . . . . . . . , . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . , . . . . . . . , . . . . .. . . . supplied to welder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . support of ......................................................................
use of at job sites ............................................................. use of by subcontractor.. . . . :. . . . . . . . . i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1X-83-03 IX-83-37 IX-83-118 IX-83-125 IX-83-150 IX-86-67 IX-83-164 IX-86-01 IX-86-06 IX-86-23 IX-86-56 IX-86-60 IX-86-87 IX-89-26 IX-86-08 IX-86-59 IX-89-12 IX-83-160 IX-83-127 IX-86-04 IX-86-1 O IX-86-14 IX-86-54 IX-89-03 IX-89-16 IX-89-19 IX-89-04 IX-89-14 IX-89-17 IX-83-17 IX-83-146 IX-86-42 IX-86-55 IX-89-26 IX-83-12 IX-86-49
File No.
BC84-250* BC82-514 N183-004 BC83-279 BC84-365 BC82-385 BC84-398 BC82-751 BC81-160 BC87-137
BC83-O42 BC87-253 BC82-O56 BC85-483 BC82-794 BC82-182
BC82-O56 BC82-770 BC84-183 BC84-151 BC84-617 BC87-O38 BC85-O23 BC85-O36 BC85-328 BC85-553 BC86-429 BC86-514A BC87-490A BC89-103- BC85-134 BC86-458 BC88-401 BC84-219 BC84-224 BC85-304 BC85-307 BC85-483 BC86-400 BC88-166A BC88-405 BC88-476 BC88-167 BC88-403 BC88-473 BC82-422 BC84-619 BC86-331 BC86-426 BC89-103 BC82-341 BC86-367
. Page No.
137 25 39 77 85 30 87 31 16
166
35 167
7 126 27 17
7 26 78 81 96
155 103 113 115 127 146 152 175 197 116 152 187 1 O 0 83
114 117 123 146 182 188 194 182 187 193
13 90
141 146 197 11
144
Cumulative Index - Interpretations Vols. 12-26
Copyright ASME International (BPVC) Provided by IHS under license with ASME
Not for ResaleNo reproduction or networking permitted without license from IHS
--`,,```,,,,````-`-`,,`,,`,`,,`---
//^:^
^#^~
^^":~
::"^$
$^~@
""#:
$@^^
:"^$"
"*~~
$"^^
:@^^
^~~"
:\\