ASME IMECE 2018 Program...Download the ASME Crowd Compass Attendee Hub App and hold the entire...

CONFERENCENov 9 – 15, 2018

David L. Lawrence Convention Center, Pi�sburgh, PA

EXHIBITIONNov 11 – 14, 2018 IMECE

ONE GREAT LEARNING EXPERIENCE.INTERNATIONAL MECHANICAL ENGINEERING CONGRESS & EXPOSIT ION

The American Society of Mechanical Engineers® ASME®

Program

Core research competencies in the MEMS Department at Pitt include:

• Advanced Manufacturing and Design

• Biomechanics and Medical Technologies

• Energy System Technologies

• Materials for Extreme Conditions

• Modeling and Simulation

• Quantitative and In Situ Materials Characterization

Degree programs (with a nearly 100 percent placement rate):

• Materials Science and Engineering (BS, MS, PhD)

• Mechanical Engineering (BS, MS, PhD)

• Nuclear Engineering (BS, MS)

• Engineering Sciences (BS)

• Certificates in: Nuclear Engineering; Simulation in Design; and Processing, Properties, and Performance of Engineering Metals

• Graduate Certificate in Nuclear Engineering is also offered online

CELEBRATING 150 YEARS OF ENGINEERING EXCELLENCESince the founding of the mechanical engineering

program at the University of Pittsburgh in 1868, the

Department of Mechanical Engineering and Materials

Science has built a strong reputation for academic

excellence, innovation and advancing research.

U N I V E R S I T Y O F P I T T S B U R G H | S WA N S O N S C H O O L O F E N G I N E E R I N G

For more information visit engineering.pitt.edu/mems

COUNTY OF ALLEGHENY

RICH FITZGERALD

COUNTY EXECUTIVE

WHEREAS, the American Society of Mechanical Engineers (ASME) will host its International Mechanical Engineering Congress and Exposition (IMECE), the world’s largest interdisciplinary mechanical engineering conference, on November 9-15, 2018 at the David L. Lawrence Convention Center in Allegheny County; and

WHEREAS, ASME is a non-profit membership organization that enables collaboration, knowledge sharing, career enrichment, and skills development across all engineering disciplines; founded in 1880 by a small group of leading industrialists, ASME has growth through the decades to include more than 130,000 members in 151 countries – 32,000 of these members are students; and

WHEREAS, the ASME IMECE will feature more than 470 sessions over 16 technical tracks, 20 track plenary presentations, four technical tours, an exhibit hall and will honor 36 distinguished honorees at various luncheons and a special Honors Assembly; ASME will also commemorate the contributions of four distinguished academic leaders: Yehoshua (Shuki) Frostig of the Technion-Israel Institute of Technology, Devdas Pai of North Carolina A&T State University, Kirti (Karman) Ghia of the University of Cincinnati, and ASME Medalist and Honorary Member Frank Kreith; and

WHEREAS, this year, the ASME Auxiliary which provides financial support to 1,273 engineering students through its scholarship and student loan program, is celebrating its 95th anniversary; the National Science Foundation is providing a track to allow for interaction with its program directors from two divisions; students will once again have a forum to present their research, design projects, and other engineering solutions and endeavors; and ASME has dozens of other speakers and activities established for the attendees of the ASME IMECE.

NOW, THEREFORE, BE IT RESOLVED that I, Allegheny County Executive Rich Fitzgerald, by virtue of the authority vested in me, do hereby proclaim November 11-15, 2018 as “International Mechanical Engineering Congress and Exposition Week” in Allegheny County. As amechanical engineer by trade, I’m delighted to host such talented engineers and professionals.

IN WITNESS WHEREOF, I have hereunto set my hand and caused the Seal of the County of Allegheny to be affixed this 11th day of November, 2018.

RICH FITZGERALD

WELCOME.............................................................................................................vi

GENERAL INFORMATION........................................................................vii

FLOOR PLANS..................................................................................................xii

SPECIAL EVENTS.........................................................................................xix

TRACK PLENARY ....................................................................................xxxiii

TECHNICAL PROGRAM AT-A-GLANCE ......................................xlv

TECHNICAL PROGRAM ..............................................................................1

AUTHOR INDEX ...........................................................................................243

COMMITTEE MEETING PROGRAM .............................................301

EXHIBITOR PROGRAM ..........................................................................311

v

vi

Dear Distinguished Attendees:

Welcome to mighty Pittsburgh, Pennsylvania—The Steel City—for this year’s annual IMECE! We are thrilled to bring togethercolleagues in academia, industry, and government in a stimulatingenvironment to promote scholarship, innovation, and socialinvestment not only to advance the mechanical engineeringdiscipline but also to address technical challenges confronting theglobe.

Through the exchange of ideas and interdisciplinary collabora-tions, IMECE hopes to facilitate the creation of the next round ofengineering discoveries and developments to improve health care,transportation, space exploration, new product design andmanufacture, and energy. Our conference comprises 13 TechnicalTracks with over 2,500 presentations, representing high-impactscholarly work that encompasses a diverse range of topics fromthe fundamental to the applied. In addition to the technical sessions, our agenda seeks to build partnershipsamong our communities, promote leadership development, andengage with our students—the future of our society.

We kick off IMECE on Sunday with the Opening Reception & Undergraduate Research and Design Expo that includes StudentDesign and Poster Competitions. Monday morning will open withan exciting Breakfast Keynote from Frank DeMauro, VicePresident and General Manager of the Advanced ProgramsDivision of the Space Systems Group of Northrop Grumman. Thatevening, we will hold the Honors Reception and Assembly. Likelast year, we have scheduled the Track Plenary Sessions to bepresented each morning, running Tuesday through Thursday. Aspecial Breakfast and Plenary Presentation will be given onWednesday morning by Mark Hindsbo, Vice President andGeneral Manager of the Design Business Unit of ANSYS. OnWednesday as well, you can find the General Poster Session,along with an NSF Workshop, which includes One-on-OneMeetings with Program Managers, and NSF Student PosterCompetitions. To conclude the week on Thursday, our ClosingPlenary Luncheon will feature Vijay Kumar, Nemirovsky FamilyDean of Penn Engineering. As in the past, the Conference Exhibitruns from Sunday through Wednesday. We would also like tohighlight several Honoring Symposia, recognizing Prof. Frostig,the late Prof. Devdas Pai, the late Dr. Kirti (Karman) Ghia, and Prof.Frank Kreith.

The conference should provide a setting conducive forprofessional networking with your colleagues, as well asinvolvement opportunities with the society through ASME divisionsand technical committees, whose events you can find listed in theprogram. The ASME Crowd Compass Attendee Hub App canassist you with scheduling the various activities and social breaks.

As always, we are incredibly appreciative of the immense efforts of our dedicated volunteer organizers and the exceptional ASMEStaff. We thank you, the attendees, in advance for making the 2018 IMECE successful with your contributions, talents, and activeengagement.

We hope that you enjoy IMECE 2018 and our beautiful host “Cityof Bridges.” We look forward to meeting you and learning aboutyour professional interests at Congress throughout the week.

Sincerely,

Olesya I. Zhupanska2018 IMECE Technical Program Chair

Stephen D. Tse2018 IMECE General Conference Chair

Alberto Cuitino2018 IMECE Technical Program Vice Chair

Rama Koganti2018 Steering Committee Chair

Francine Battaglia2018 Steering Committee Vice Chair

Assimina Pelegri2018 Steering Committee Senate Chair

George Kardomateas2018 Steering Committee Senate Co-Chair

ASME 2018 International Mechanical Engineering Congress and Exposition (IMECE),November 9–15, 2018, Pittsburgh, PA, USA

viii

ASME CROWD COMPASS ATTENDEE HUB APPDownload the ASME Crowd Compass Attendee Hub App and hold the entire program atthe palm at your hand! The ASME Crowd Compass Attendee Hub App allows you to easilylook up sessions, search for papers or people, message with other attendees, and create your own schedule. Be sure to download the app for the latest information and chances to win prizes.

AUTHORSSPEAKERS’ PRACTICE ROOMRoom 322 on the third floor of the David L. Lawrence Convention Center is the Authors’/Speakers’ Practice Room. The schedule is Monday–Thursday, November 12–15, 7:00am–5:00pm. The room is equipped with two (2) LCD projectors, two (2) laptop computers, andtwo (2) screens for authors/speakers to practice their presentations.

SCANNINGAll authors are required to have their badge scanned before entering a technical session. Only fully registered authors are allowed to attend plenary and technical sessions.

AUDIOVISUAL EQUIPMENT IN SESSION ROOMSAll technical sessions are equipped with one LCD projector, one laptop, one screen, and a slideadvance. You may bring your presentation on USB flash drive and load it onto the laptop in thesession room.

BADGES ARE REQUIRED FOR ADMISSIONTO ALL ACTIVITIESAll conference attendees must wear their official IMECE 2018 conference badge in order to gainadmission to conference sessions, events, and activities. No one will be admitted to the technicalsessions unless he/she is registered and wearing a badge that shows “Full Conference.”

BUSINESS CENTER There is no business center located in the convention center. FedEx/Kinkos is located acrossfrom the Convention Center at 960 Penn Avenue, Pittsburgh, PA 15222. Services include, but are not limited to, laser and color printing, document scanning, and ground/air shipping.For more information, you can contact this location at (412) 391-2014.

Hours of OperationMonday–Friday7:30am–9:00pmSaturday 8:00am–6:00pmSunday Closed

CHILDCARE SERVICES (NEW BENEFIT FOR IMECE 2018)For those needing childcare services this year, we are pleased to be offering a new benefit forIMECE 2018.

ASME will reimburse up to a total of $250/per registered 2018 IMECE attendee for childcareservices incurred by a licensed service provider while attending IMECE November 9–15, 2018, between the hours of 8am–5pm. Below is a list of local companies, provided by Visit Pittsburgh.

Please note that neither Visit Pittsburgh nor ASME is recommending any one company.Additionally, ASME suggests you may wish to consult with your local hotel concierge foradditional licensed service provider suggestions.

Nanny Poppinz412-307-4914http://www.nannypoppinz.com/agency/nanny-childcare-pittsburgh-pennsylvania.html

East Wind Nannies412-467-6396https://eastwindnannies.com/pittsburgh

Urban SitterThis site will review each person, give their pricing, and list out their experience. You will needto join to see each person’s full profile. https://www.urbansitter.com/college-babysitters/university-of-pittsburgh

ASME (BOOTH 209)Two Park AvenueNew York, NY 10016-5990 USA+1 800-THE-ASME(800-843-2763)www.asme.org

ASME is a not-for-profitmembership organization thatenables collaboration, knowledgesharing, career enrichment, andskills development across allengineering disciplines, toward a goal of helping the globalengineering community developsolutions to benefit lives andlivelihoods. Founded in 1880 by a small group of leadingindustrialists, ASME has grownthrough the decades to includemore than 130,000 members in 151 countries. Thirty-twothousand of these members are students.

While at IMECE, take time to visitthe ASME booth in the ExhibitHall, Hall B on the second floor of the David L. LawrenceConvention Center. Learn aboutASME’s two newest Journals on Medical Diagnostics andNondestructive Evaluation, and pick up information aboutASME Transactions Journals,Proceedings, ASME Press books,Codes & Standards, Catalogs,and The ASME Digital Collection.Representatives from ASMEPublications and Membership will be present to answer yourquestions

ix

KinderCare412-765-3973They are not able to provide babysitting services off-property but they do provide child care intheir downtown location. They are open 6:30am-6:30pm.

CONTINENTAL BREAKFASTContinental breakfast will be served on Monday, November 12 & Wednesday, November 14,prior to the presentations in Ballroom A and Tuesday & Thursday, November 13 & 15, in theBallroom Foyer of the David L. Lawrence Convention Center. Fully paid attendees are entitledto attend. The schedule is as follows:Monday, November 12 7:30am–8:00am *Ballroom ATuesday, November 13 7:30am–8:00amWednesday, November 14 7:30am–8:00am *Ballroom AThursday, November 15 7:30am–8:00am

GIVE-BACK PROJECTSHelp us to help the community! This year we would like to support two important localcharities, see how you can participate.

Kids In Need FoundationThe Kids In Need Foundation provides low-income schools with the supplies needed toparticipate and engage in the classroom. Drop off crayons, glue sticks, markers, notebooks,pencils, and pens.

Women’s Center & Shelter of Greater PittsburghDonate your old smartphones and cell phones to Women’s Center & Shelter and you aresupporting victims of domestic violence. Donated phones are sent to the Shelter AllianceProgram, which will result in a monetary donation to Women’s Center & Shelter to benefitprograms and services for survivors of domestic abuse.

There are drop off locations for both charities in the registration areas at the Westin Hotel andDavid L. Lawrence Convention Center.

GUEST HOSPITALITY AND FAMILY MEETING ROOMThe hospitality room is located in Pennsylvania East, on the second floor of the Westin Hotel.The schedule is as follows:Sunday, November 11 7:00am–9:30amMonday, November 12 7:00am–9:30amTuesday, November 13 7:00am–9:30amWednesday, November 14 7:00am–9:30am

LUNCHConference lunches will be served Monday–Wednesday, November 12–14, in Hall B of theDavid L. Lawrence Convention Center. On Thursday, November 15, lunch is served in BallroomA on the third floor. Fully paid attendees are entitled to attend. The schedule is as follows:Monday, November 12 11:30am–12:30pmTuesday, November 13 11:45am–12:45pmWednesday, November 14 11:45am–12:45pmThursday, November 15 12:40pm–1:10pm

MEETING INFORMATION Main meeting information is located on the third floor area of the David L. Lawrence ConventionCenter. The operating hours are as follows:Sunday, November 11 7:00am–6:00pmMonday, November 12 7:00am–6:00pmTuesday, November 13 7:00am–6:00pmWednesday, November 14 7:00am–6:00pmThursday, November 15 7:00am–5:45pm

EXHIBITSINFORMATIONThe exhibits are located in Hall Bon the second floor of the DavidL. Lawrence Convention Center.The expo hall is your social hub!Be sure to visit the exhibitors andcheck out the Education Theater,poster sessions, and lounge.

The exhibit hours are as follows:

Sunday, November 115:30pm–7:00pm

Monday, November 1211:30am–4:00pm

Tuesday, November 1311:45am–4:00pm

Wednesday, November 1411:45am–4:00pm

EMERGENCYINFORMATIONAlert convention center staff bypicking up a white house phoneto report a medical or securityemergency. Describe the exactlocation of the incident and thenature of the emergency.Whenever an emergency situationis detected and announced,everyone is expected to evacuatethe facility and safely assembleoutside until the “All Clear” isgiven. Be sure to move to a safedistance and check the App forupdated information.

x

MEMBERSHIP TO ASME (ONE YEAR FREE) Registrants who paid the non-member conference registration fees will receive a one-yearASME Membership. ASME will automatically activate this complimentary membership forqualified attendees. Please allow approximately four weeks after the conclusion of theconference for your membership to become active. Visit www.asme.org/membership for moreinformation about the benefits of ASME Membership.

MOTHER’S ROOMThe David L. Lawrence Convention Center offers a dedicated space for parents of newborns/infants to be used as a private space for nursing mothers. When at the convention center,please ask a staff member for the location of the mother’s room on the second level and how to gain access.

OPENING RECEPTIONExhibit Hall Grand Opening and Opening Reception5:30pm–7:00pmHall B, David L. Lawrence Convention Center

All registrants are invited to this special event to celebrate the opening of the IMECE exhibits.Come grab a drink and some food, meet this year’s group of exhibitors, and learn about theirproducts and services.

POSTER PRESENTATIONSPoster presentations will be held at the following times:

Sunday, November 11, 20185:30pm–7:00pmHall B, David L. Lawrence Convention Center

Undergraduate Research and Design Expo Student Poster CompetitionPoster Setup: 2:30pm–3:30pmPoster Judging: 3:30pm–6:30pmExpo (General Viewing): 5:30pm–7:00pmWinners Announced: 6:30pm–7:00pm

Wednesday, November 14, 201811:45am–3:00pmHall B, David L. Lawrence Convention Center

NSF Student Competition (Posters Only)Poster Setup 10:00am–11:45am General Viewing/Judging 11:45am–2:30pmAwards 2:30pm–3:00pm

Virtual Podium (Posters Only)Poster Setup 10:00am–11:30amGeneral Viewing 11:45am–2:30pm

PRAYER ROOMRoom 415 on the fourth floor of the David L. Lawrence Convention Center is exclusively forthose who need to pray in between sessions. There will be dividers in the room to create asemi-private space.

PRESENTER ATTENDANCE POLICYAccording to ASME’s Conference Presenter Policy, if a paper is not presented at theConference by a fully registered author of the paper, the paper cannot be published in theofficial archival Proceedings, which are published on The ASME Digital Collection post-conference. Papers not presented at the conference cannot be cited.

PHOTOGRAPHYASME has retained the servicesof a photographer to capturephoto images of the events andactivities from the conference.The photographer will be takingphotos as assigned by the ASMECommunications Department. All photographs are the soleproperty of ASME, and ASMEretains all rights in and to saidphotographs. These photographsmay be used for promotionalpurposes only, including, but notlimited to, the ASME website. If you require more informationabout the use of IMECEphotographs, please go to themedia desk at ConferenceRegistration.

RIBBON CUTTINGJoin us on Sunday, Novmeber11th at 5:25pm for the ribboncutting ceremony outside ofExhibit Hall B.

xi

PUBLICATIONS: IMECE2018 CONFERENCE PAPERS ANDPROCEEDINGSTechnical papers accepted for publication for IMECE2018 will be available through a dedicatedOnline Papers site available to all fully paid attendees beginning a week before the conference.

• Post-conference, an ISO batch file and two zip files will be made available on the OnlinePapers site so that users can download to their personal computer systems.

• Post-conference, papers presented at the conference will be published as the officialProceedings of the conference on The ASME Digital Collection(asmedigitalcollection.asme.org). Authors may refer to The Collection for DOI links andcitation information for their papers.

All ASME conference Proceedings are disseminated worldwide and submitted for indexing toSCOPUS, COMPENDEX, the ISI Conference Proceedings Citation Index, and several otherindexing and discovery services. For further information about ASME Publications, please stopby the ASME Booth at the Exhibit Hall.

REFRESHMENT BREAKSMorning Break – Ballroom FoyerMonday, November 12 9:30am–9:45amTuesday, November 13 9:45am–10:00amWednesday, November 14 9:45am–10:00amThursday, November 15 10:40am–10:50am

Afternoon Break – Exhibit Hall B unless otherwise notedMonday, November 12 3:30pm–3:45pmTuesday, November 13 3:00pm–4:00pm *Join the University of Pennsylvania

for their break reception in the exhibit hall.Wednesday, November 14 3:30pm–3:45pm Thursday, November 15 3:50pm–4:00pm (Ballroom Foyer)

REGISTRATIONConference registration is located in the Exhibit Hall B foyer on the second floor of the David L.Lawrence Convention Center. The operating hours are as follows:Sunday, November 11 7:00am–6:00pmMonday, November 12 7:00am–6:00pmTuesday, November 13 7:00am–6:00pmWednesday, November 14 7:00am–6:00pmThursday, November 15 7:00am–5:45pm

Registration for committee meetings and special events is located in the Rotunda Area on thesecond floor of the Westin Hotel during the following hours:Friday, November 9 8:00am–5:00pmSaturday, November 10 7:00am–6:00pmSunday, November 11 7:00am–6:00pmMonday, November 12 7:00am–6:00pmTuesday, November 13 7:00am–6:00pmWednesday, November 14 7:00am–6:00pm

TECHNICAL SESSIONS All attendees are required to have their badge scanned before entering a technical session.Only fully registered conference attendees are allowed to attend plenary and technical sessions.

TICKET SALESMany division and society awards are given at IMECE. Tickets for these functions may bepurchased on-site at the ASME Registration Desk. Please purchase tickets as soon as possibleafter you register. In order to ensure accurate guarantees and avoid disappointment, tickets forall events will be sold up to 48 hours prior to the event or as long as there is flexibility to adjustthe guarantee.

SOCIAL MEDIA Let’s be social! We encourage youto use the hashtag #IMECE2018to tag your social media postsand photos throughout theconference.

WIFIFree Wi-Fi access is provided to IMECE conference attendeesthroughout the David L. LawrenceConvention Center. Free Wi-Fiaccess is also provided in thehotel rooms at the Westin Hoteland the Omni Penn Plaza. Toaccess the Wi-Fi in theconvention center and the WestinHotel use these credentials:

David L. Lawrence ConventionCenterNetwork: IMECEPassword: imece2018

Westin HotelNetwork: Westin_ConferencePassword: imece2018

xii

DA

VID

L. LA

WR

EN

CE

CO

NV

EN

TIO

N C

EN

TE

R –

SE

CO

ND

FLO

OR

xiii

DA

VID

L. L

AW

RE

NC

E C

ON

VE

NT

ION

CE

NT

ER

–S

EC

ON

D F

LOO

R

xiv

DA

VID

L. LA

WR

EN

CE

CO

NV

EN

TIO

N C

EN

TE

R –

FOU

RT

H F

LOO

R

xv

WESTIN HOTEL

SECOND FLOOR

THIRD FLOOR

GUESTTOURS

CITY TOUR OF PITTSBURGHSunday November 11th | 9:30am–12:30pmPrice: $55 per person

Check out the great city of Pittsburgh and see why it’s one of the hottest cities in the country.Our knowledgeable tour guide will host this three-hour bus tour that will highlight the following:

North Shore – featuring PNC Park and Heinz Field stadiums and a stunning view of downtownPittsburgh and its many golden bridges

Downtown – “Golden Triangle” with its diverse architecture of old and new. The city is shapedas a triangle with the beautiful Point State Park at the tip, where the confluence of two riversforms a third.

Strip District – The one-half square mile shopping district is chock full of ethnic grocers,produce stands, meat and fish markets, and sidewalk vendors.

Oakland – Pittsburgh’s “Meds and Eds” hub — This area is home to world-renowned hospitalsas well as the University of Pittsburgh, Carnegie Mellon University, and so much more.

Mt. Washington – Stand on one of the observation decks and take in the spectacularpanorama of the downtown skyline below and see how the Monongahela and Allegheny Riversform the Ohio River and at the city’s “Point.” USA Today named the view from Mt. Washingtonone of the 10 most beautiful views in America.

TOUR OF FALLINGWATERMonday November 12th | 9:30am–3:30pmPrice: $75 per person

Fallingwater is a house designed by architect Frank Lloyd Wright in 1935 in rural southwesternPennsylvania, 43 miles (69 km) southeast of Pittsburgh. The house was built partly over a water-fall on Bear Run in the Mill Run section of Stewart Township, Fayette County, Pennsylvania,located in the Laurel Highlands of the Allegheny Mountains. The house was designed as aweekend home for the family of Liliane Kaufmann and her husband, Edgar J. Kaufmann, Sr.,owner of Kaufmann's Department Store.

After its completion, Time called Fallingwater Wright’s “most beautiful job,” and it is listedamong Smithsonian’s “Life List of 28 places to visit before you die.” The house was designateda National Historic Landmark in 1966. In 1991, members of the American Institute of Architectsnamed Fallingwater the “best all-time work of American architecture” and in 2007, it wasranked 29th on the list of America’s Favorite Architecture according to the AIA.

This guided house tour will provide you full access to this iconic landmark. Stay and shop in thegift shop, tour the grounds, and have lunch in the café.

TECHNICAL TOURS

CARNEGIE MELLON UNIVERSITY LABORATORY TOUR – SOLD OUTMonday, November 121:00–4:00pmLimit 50 guests$25

Carnegie Mellon College of Engineering is world renowned and focuses on innovative,interdisciplinary, and global education and research. All visitors will tour various labs, including:

Makerspace: The TechSpark makerspace is Carnegie Mellon University’s focal point fortechnology innovation. This College of Engineering facility provides equipment for rapidfabrication of designs from idea to reality for coursework, research, and entrepreneurship,which includes Rabid Fabrication with Laser Machines.

Soft Machines Lab: The Soft Machines Lab develops materials and technologies that enablemachines and robots to be safe for human contact. We focus on creating soft multifunctionalmaterials that can act as artificial skin, muscle, and nervous tissue for applications in bio-inspired soft robotics, humanoid robotics, and wearable computing. Visitors will see the labspace and interact with some of the novel “soft-matter" technologies that we have recentlydiscovered.

xvi

ALL TOUR BUSES

LEAVE ATTHE DLCC,

CORNER OF 10TH &

FRENCH STREETS

Robomechanics Lab: The Robomechanics Lab works on designing robots that can operate inchallenging real-world environments. We will be showing several robotic platforms, includingthe four-legged Minitaur robot as well as a cheetah-inspired robot tail, a wheeled rover that candig trenches in sandy terrain, and new robotic hooves that will allow a robot to climb steeprocky terrain.

Additive Manufacturing Lab: Tour the newly renovated metals additive manufacturing (AM) labwithin the Mechanical Engineering Department and administered by the CMU NextManufacturing Center. Equipment includes Optomec Aerosol Jet, EOS Laser Sintering, ArcamE-Beam Sintering, and ExOne Binder Jet AM machines. Parts fabricated by these machinessupport both fundamental research and educational efforts, including new undergraduate minorand master’s degrees in AM.

Thermal Energy Engineering Lab: The Thermal Energy Engineering Labs seek to understandthe underlying physics of thermal energy transport. The tour will focus on thermoreflectancetechniques, which allow us to directly measure properties like thermal conductivity and thermalinterface resistance in both nano- and macroscale materials. These properties are critical tothermal management in next generation electronics and to optimize the efficiencies of solidstate energy conversion devices.

UNIVERSITY OF PITTSBURGH HUMAN ENGINEERING RESEARCH LABORATORIES –

SOLD OUTTuesday November 139:30am–12:00pmLimit 50 guests$25

The Human Engineering Research Laboratories (HERL) is a collaboration between theUniversity of Pittsburgh, the VA Pittsburgh Healthcare System, and UPMC Health System.HERL is dedicated to wheelchair and mobility research, specifically by improving the mobilityand function of all people with disabilities through advanced engineering in clinical researchand medical rehabilitation on local, national, and international levels. HERL also studiesrobotics in assistive technology, athletics in rehabilitation, assistive living spaces, wheelchairtransfer efficiency, clinician training, and force and vibration on wheelchair users. Attendees willgain an understanding of the work being done at the Laboratories.

WESTINGHOUSE WALTZ MILL OPERATIONS – The Center of Excellence forWestinghouse’s Global FieldServices in Americas and AsiaWednesday November 1412:30pm–4:00pmLimit 30 guests$25

Each spring and fall Westinghouse executes a series of outages at nuclear power plants across the United States. It is extremely important that these outages are executed efficientlyand that emergent issues are dealt with on an expedited basis. Westinghouse provides outageservices anywhere from approximately 20 to 40 customer sites each outage season (spring and fall). This requires Westinghouse to staff anywhere from 2,000 to 2,500 positions utilizingapproximately 800 personnel. In order to achieve efficiency and predictability in execution,Westinghouse has an extensive training program that utilizes two training bays equipped with mock-ups and equipment to effectively prepare personnel for site operations. Toolingsophistication varies from the simplistic to complex robotic systems. The deployment ofpersonnel and equipment along with the day-to-day response to ongoing outage operationsproves to be quite a logistical endeavor. Westinghouse has developed process and proceduresalong with a Westinghouse Outage Control Center to manage the complexity of outageoperations across multiple sites. Westinghouse invites you to come tour our facility and engagein outage service execution discussion. The tour is scheduled to take place from 1:30 to3:00pm. Visitors are reminded that they must wear closed-toed shoes and no photography is permitted on the premises. This tour will be open to the first 30 participants who register.Attendance will be subject to approval.

xvii

ALL TOUR BUSES

LEAVE AT THE DLCC,

CORNER OF 10TH &

FRENCH STREETS

ANSYS CORPORATE HEADQUARTERS – SOLD OUTThursday November 158:30am–11:30amLimit 50 guestsCost $25

Visit the world headquarters of ANSYS, global leader in engineering simulation. Here, advancedsoftware tools that help engineers simulate diverse physics such as fluid dynamics, structures,electronics, semiconductors, and embedded software are planned, developed, and marketed.In this “insider’s” tour, you will:

• Tour the workspace and meet the team that develops ANSYS Mechanical

• Learn about advanced simulation concepts and technologies

• Understand the process used to validate, verify, and demonstrate that simulation codesdeliver results that match physical testing

• Try ANSYS Discovery Live, an interactive experience in which you can manipulate geometry,materials types, or physics inputs, then instantaneously see changes in performance

• Read posters on a variety of advanced fluids, structures, and multiphysics topics

ASME LANDMARKSPittsburgh is a city of engineering innovation and home to the Duquesne and MonongahelaInclines—two official ASME Historical Landmarks. These funiculars have been in operation for over 140 years, transporting pedestrians from the uphill neighborhoods to the industry by the riverbanks. Designed by engineer John Endres, they are the oldest and last of theoriginal seventeen inclines in Pittsburgh and are examples of 19th and early 20th centurytransportation—still in action today! Designated Historical Landmarks in 1977, the city viewsare spectacular—offering sweeping views from Mt. Washington of the three rivers and thebeautiful city—and the engineering history speaks for itself. The landmarks are approximatelyone mile in distance from each other.

Traveling to Monongahela Incline – from Westin Convention Center

Parking is free.

8 minute drive from Westin Convention Center

Bus fares are only $2.50 one way, exact change only.

Bus from Liberty Avenue at 10th Street

Traveling to Duquesne Incline – from Westin Convention Center

Parking is free.

5 minute drive from Westin Convention Center

Bus fares are only $2.50 one way, exact change only.

xviii

** Share your photosof these engineering

marvels with the hashtag #ASMELandmarks **

xx

FRIDAY, NOVEMBER 9

ASME Business Meeting5:00–5:30pm

Allegheny Grand Ballroom III, Third Floor,The Westin Hotel

Call to order by Said Jahanmir, ASME President, 2018–2019

Report by the TreasurerMembership Report2017–2018 Annual ReportState of the Society VideoReport on Proxies ReceivedRatification of AuditorElection of 2019 Nominating CommitteeOther Business

SATURDAY, NOVEMBER 10

Old Guard Oral Presentation Competition9:00am–4:00pm

Westmoreland Central, Second Floor,The Westin Hotel

All are invited to attend the finals of the Society-level Old GuardOral Presentation Competition. Meet the engineering studentswho have successfully competed at the 2018 E-Fests and arenow vying for the $2,000 ASME Old Guard Prize foroutstanding presentation skills.

Like all effective professionals, engineers must possess a well-developed ability to synthesize issues and communicate bothorally and in writing. This competition is designed to emphasizethe value of an ability to deliver clear, concise, and effectiveoral presentations, particularly pertaining to some sphere inwhich an engineer is or should be involved. Presentation topicsmust address a technical, economic, or environmental aspectof engineering or other basic engineering theme, and oftenrelate to the students’ engineering design/analysis projects.

For more information, please visithttps://www.asme.org/events/competitions/old-guard-competitions/old-guard-prize-oral-presentation-competition/

Old Guard Committee Reception6:30–7:30pm

Somerset East, Second Floor,The Westin Hotel

Please join us for the 2018 ASME Old Guard CommitteeReception on Saturday, November 10. The ASME Old GuardCommittee will announce the Old Guard Oral Presentationwinners and present them with their award certificates.

SUNDAY, NOVEMBER 11

2018 Student Design Competition Finals @ IMECE Ballroom B, David L. Lawrence Convention Center

Run of Show | Staff POCs: Erin Dolan (646-369-7248) andBrandy Smith (917-596-0306)

The 2018 Student Design Competition has challenged theimagination and technical design skills of all its participants. At the Finals on Sunday, November 11, teams who’veparticipated in an SDC held at each E-Fest this year willcompete against each other in a modified, four-way football(soccer) competition. These teams will come equipped with astrategic game plan, robot(s), and a will to battle it out for theChampionship Title.

SCHEDULE7:00am–3:30pm SDC Finals (Preliminary Rounds) |

Ballroom B

7:00am–7:30am Staff set signs, tape course/field, etc.

7:30am–8:00am Team Arrivals and check in

8:00am–9:00am Robot Inspections

9:00am–10:30am Round 1 (on one playing field)

10:30am–12:00pm Round 2 (on the other playing field)

12:00pm–1:00pm LUNCH BREAK

1:00pm–1:45pm Semi Finals Round 1 (on one playing field)

1:45pm–2:30pm Semi Finals Round 2 (on the other playingfield)

3:00pm–3:30pm FINALS

Members and Students LuncheonSponsored by: Committee on Honors

12:00pm–1:30pmAllegheny Grand Ballroom II, Third Floor,The Westin Hotel

Ticket: $60

WILLIAM T. ENNOR MANUFACTURINGTECHNOLOGY AWARDScott Smith, Ph.D., FellowUniversity of North Carolina at Charlotte

CHARLES T. MAIN STUDENT LEADERSHIPAWARD

GOLD Brandon Graham, MemberRowan University

SILVER Joseph Pechstein, MemberMilwaukee School of Engineering

GUSTUS L. LARSON MEMORIAL AWARDKripa K. Varanasi, Ph.D., MemberMassachusetts Institute of Technology

PI TAU SIGMA GOLD MEDALNenad Miljkovic, Ph.D., MemberUniversity of Illinois at Urbana-Champaign

CHARLES RUSS RICHARDS MEMORIAL AWARDKon-Well Wang, Ph.D., FellowUniversity of Michigan

HENRY HESS EARLY CAREER PUBLICATIONAWARDArin M. Ellingson, Ph.D., MemberCasey P. Johnson, Ph.D.Mary H. FoltzCraig C. KageUniversity of Minnesota

OLD GUARD EARLY CAREER AWARDMichael P. ]of Standards & Technology

GEORGE WESTINGHOUSE GOLD MEDALTim Lieuwen, Ph.D., Fellow Georgia Institute of Technology

ARTHUR L. WILLISTON MEDALNoah M. Purdy, MemberDelta Systems Inc.

First-Time Attendees Orientation2:30pm–3:30pm

Room 407, David L. Lawrence Convention Center

First-time attendees to IMECE are cordially invited to thisinformal yet informative session to learn about how to navigatethe conference, how to use the program, the new App, andmore importantly, where all the best parties are. Snacks andrefreshments will be served.

VOLT Leadership Workshop IMECE 20182:00pm–4:00pm

Pennsylvania East, Second Floor,The Westin Hotel

Fostering an Innovative Environment

In order for ASME to meet the challenges of the future, wemust innovate. When we innovate and try new things, some of them are bound to fail. Failure is a necessary part of theprocess. The key is to recognize our failures, fail fast, and learnfrom our mistakes. In this workshop, we will explore how wecan foster an innovative environment that allows for failure andencourages learning.

ASME FutureME Mini-TalksPresented by the ASME Early Career EngineersProgramming Committee

4:00pm–5:00pmRooms 411/412,

David L. Lawrence Convention Center

Held at the 2018 ASME International Mechanical EngineeringCongress and Exposition (IMECE)

Join the ASME FutureME Community for an opportunity to hearfrom several experienced engineers as they present short andinspirational Mini-Talks. Our presenters will share their personalstories and experiences in career development and the choicesthey have made throughout their careers to becomesuccessful.

The Mini-Talks will focus on technical disciplines related toASME’s core technologies and enabling applications, likeadvanced manufacturing, bioengineering, robotics, materials,or design engineering. Presenters will discuss subjects such ascurrent trends in these technical industries, skills and trainingthat helped them be successful, and potential careeropportunities in these disciplines.

Exhibit Hall Grand Opening and Opening Reception5:30pm–7:00pm

Hall B, David L. Lawrence Convention Center

All registrants are invited to this special event to celebrate theopening of the IMECE exhibits. Come grab a drink and somefood, meet this year’s group of exhibitors, and learn about theirproducts and services.

xxi

THE ASME AUXILIARY ISTURNING 95YEARS OLD

In the past 95 years, the ASMEAuxiliary has assisted ASME andplayed a key role in financiallysupporting over 1,301 engineeringstudents through their scholarshipand student loan programs to anamount for more than $2,500,000.Recipients are working in the

fields of robotics and bio-mechanical engineering andemployed with major engineering and aerospacecorporations.

Perhaps you or someone you know are one of thesedeserving and lucky recipients. We would like to not onlycontinue but expand the program to help our students be more competitive in the global workplace. Please visit the ASME’s Auxiliary table at the IMECE’s OpeningReception and learn more about how you can getinvolved with our very important mission. You may askus how you can help the Auxiliary to excel in our mainmission: “To establish education funds for the purpose of assisting worthy students in the study of mechanicalengineering at the undergraduate and graduate level.”

Sara SahayASME Auxiliary President

International Undergraduate Research and DesignExposition

5:30pm–7:00pmHall B, David L. Lawrence Convention Center

Poster Setup: 2:30pm–3:30pm

Expo (General Viewing): 5:30pm–7:00pm

Winners Announced: 6:30pm–7:00pm

The Student Expo provides undergraduate engineeringstudents with a professional and technical forum for presentingtheir research, design project, and other engineering solutionsand endeavors to top researchers and scientists fromacademia, industry, government, prospective employers,entrepreneurs graduate schools, and potential faculty advisors.

ASME FutureME Social Meetup for Early CareerEngineersHosted by the ASME Early Career Engineers Programming Committee

7:00pm–9:00pmHosted at Bill’s Bar and Burger, 1001 Liberty Avenue

at The Westin Convention Center Hotel

Registration required: $10

Co-located with the 2018 ASME International MechanicalEngineering Congress and Exposition (IMECE)

Meet new people ● Join a community of like-minded engineers● Learn from others in engineering ● Share experiences ●Explore Pittsburgh

To register scan the QR code or go tohttp://bit.ly/SMREG18.

MONDAY, NOVEMBER 12

Keynote Event8:00am–9:30am

(breakfast served from 7:30am to 8:00am)Ballroom A, David L. Lawrence Convention Center

Welcome Remarks: Valerie McDonald Roberts, Chief UrbanAffairs Officer, Office of Mayor William Peduto, Pittsburgh, PA

Keynote Speaker: Frank DeMauro, Vice President andGeneral Manager, Advanced Programs Division, SpaceSystems Group, Northrop Grumman

“Longer Lifespan: The Value of Satellite Servicing and In Space Robotics”

Frank DeMauro will describe the various methods currently being developed by NorthropGrumman for in-orbit life extension and in-orbitspacecraft assembly. The status of thedevelopment of robotic and non-robotic capabilities will be presented along with

Northrop Grumman’s roadmap for commercial servicing vehicles.

Presenter Biography: Frank DeMauro is the Vice Presidentand General Manager of Northrop Grumman’s AdvancedPrograms Division, where he is responsible for the programexecution, business development, and financial performance ofthe company’s Human Space Systems, Satellite Servicing, andCommercial Communication Satellite business segments.These business segments include critical Northrop Grummanprograms such as NASA’s Commercial Resupply Services(CRS) and Mission Extension Vehicle (MEV) programs.

Previously, Mr. DeMauro managed the Human Space Systemsbusiness area and served as the Program Director of the CRSprogram where he managed the development, production, and delivery of multiple Cygnus spacecraft and oversaw

xxii

several successful cargo delivery missions. A long timeNorthrop Grumman employee, Mr. DeMauro has also held theposition of Vice President of Engineering as well as numerousleadership and program management positions in NorthropGrumman’s commercial communications satellite group. In his30 year career, he has also held positions in SubsystemDevelopment, Systems Engineering, and BusinessDevelopment.

Mr. DeMauro has received the NASA Exceptional PublicService Medal, the National Space Society Space PioneerAward, and the Pete Rustan Civil Space “Courage to Innovate”Award. As a member of the Cygnus team, he has also receivedthe AIAA Space Systems Award and the RNASA Stellar Awardfor the COTS Development Program.

A native of New Jersey, Mr. DeMauro holds a B.S. in Mechanicaland Aerospace Engineering from Rutgers University.

VOLT Leadership Workshop IMECE 201810:00am–12:00pm

Fayette, Second Floor,The Westin Hotel

Fostering an Innovative Environment

In order for ASME to meet the challenges of the future, wemust innovate. When we innovate and try new things, some of them are bound to fail. Failure is a necessary part of theprocess. The key is to recognize our failures, fail fast, and learnfrom our mistakes. In this workshop, we will explore how wecan foster an innovative environment that allows for failureand encourages learning.

President’s Luncheon12:00pm–1:30pm

Allegheny Grand Ballroom II, Third Floor,The Westin Hotel

PER BRUEL GOLD MEDAL FOR NOISE CONTROL ANDACOUSTICSSean F. Wu, Ph.D., FellowWayne State University

J. HALL TAYLOR MEDALDaniel T. Peters, FellowStructural Integrity Associates, Inc.

EDWARD F. OBERT AWARDAndrea Toffolo, Ph.D.Luleå University of TechnologyAndrea Lazzaretto, Ph.D., FellowUniversity of PadovaSergio Rech, Ph.D.University of Padova

SOICHIRO HONDA MEDALAshwani K. Gupta, Ph.D., FellowUniversity of Maryland

FRANK KREITH ENERGY AWARDWilliam Martin Worek, Ph.D., FellowTexas A&M University – Kingsville

JAMES HARRY POTTER GOLD MEDALRaj M. Manglik, Ph.D., FellowUniversity of Cincinnati

HENRY LAURENCE GANTT MEALTodd R. Allen, MemberAllen Research Tech-Services, Inc.

KATE GLEASON AWARDAwatef A. Hamed, Ph.D., FellowUniversity of Cincinnati

SPIRIT OF ST. LOUIS MEDALStephen P. Engelstad, Ph.D., MemberLockheed Martin Aeronautics Company

WORCESTER REED WARNER MEDALMartin Ostoja-Starzewski, Ph.D., FellowUniversity of Illinois at Urbana–Champaign

HENRY R. WORTHINGTON MEDALJaikrishnan R. Kadambi, Ph.D., FellowCase Western Reserve University

MCDAVID MENTORING AWARDRobert M. Wagner, Ph.D., FellowOak Ridge National Laboratory

ME/MET Department Heads Forum1:30pm–3:30pm

Westmoreland Central & East, Second Floor, The Westin Hotel

The Department Heads Forum is an annual event at the ASMECongress for mechanical engineering and mechanicalengineering technology department heads. The forum is achance to learn about some of the latest research fundingdevelopments, curricular innovations, accreditation issues, and upcoming ASME Engineering Education activities.

Noise Control and Acoustics Division: RayleighLecture

Dr. Roger Ohayon, Conservatoire National des Arts et Metiers,Structural Mechanics and Coupled Systems Laboratory

3:45pm–5:15pmRoom 409, David L. Lawrence Convention Center

After being Researcher at the aerospaceresearch laboratory in France (ONERA), RogerOhayon joined the Conservatoire National desArts et Metiers (CNAM/Structural Mechanicsand Coupled Systems Research Laboratory)as Professor Chair of Mechanics where he is

now Emeritus Professor. He is Fellow of several associations(AIAA, ASME, IACM) and the recipient of the HumboldtResearch Award, Lifetime Achievement SPIE Award,ASMS/ASME/AIAA Award, Prandtl Award from Eccomas, IACM Awards, EASD Senior Prize, and the French Academyof Science Award. His expertise lies in mechanical andcomputational modeling of fluid-structure and structuralacoustics interaction problems and smart structural systems.

xxiii

He is on the editorial board of thirteen international journals,such as IJNME, CMAME, Computational Mechanics, and theassociate editor of JIMSS and AIAA. He is the co-editor ofseveral books and co-author of more than one hundredpublications in refereed international journals.

Roger Ohayon has pioneered the development of mechanicaland computational methods for prediction of fluid-structurevibrations of coupled systems in fluid-structure interaction(hydroelasticity and sloshing) and in structural-acoustics (noise prediction). In this context of fluid-structure interaction(attenuation for liquids in reservoirs) and of structural-acoustics(for noise reduction), he proposed to reduce vibrations usingstructural devices for smart adaptive intelligent thin systemsand, more recently, has proposed an original dissipativeinterface modeling using passive/active and hybrid treatments.

Title: Computational Vibroacoustics in Low and MediumFrequency Bands

It is proposed to analyse, from predictive computational pointof view—finite element discretization and specially appropriatevarious reduced order models—the dynamic behaviour ofcomplex coupled systems and their adaptive intelligenttreatment of interfaces for vibration and noise reduction ofinterior fluid-structure interactions problems, such asliquid/gas-structure, in low and medium frequency domains.

The applications may be found, for example, in aerospaceengineering such as liquid propelled launchers for theattenuation of the vibrations of liquids in tanks, the attenuationof noise in fairings for the satellites as well as attenuation ofnoise in fuselage cabin of aircrafts or helicopters, andattenuation of noise in automotive industries.

The frequency domain of interest is quite important for thecomputational analysis in order to avoid a large number ofdegrees of freedom, which lead to prohibitive computer times.In effect, the coupled situation is quite different from theclassical problem of acoustic response to prescribed structuralinterface displacement/velocity fields because the dynamic ofthe structure can be very complex (composite structure, forinstance). The low-frequency regime is characterized by a low modal density for structural-acoustics systems in which a frequency-independent modeling of the structural dampingis, in most cases, satisfactory. The medium frequency range is characterized by a frequency-dependent damping in thestructure as well as in the fluid. A distinction should be clearly made between gas and/or liquids taking into accountincompressibility/compressibility as well as light fluids/heavyfluids considerations with gravity sloshing effects.

In parallel of direct symmetric variational formulations/ numerical finite elements for modal analysis of fluid-structureinterior vibrations, the construction of a family of appropriatereduced order models is of prime importance for sensitivityanalysis, multidisciplinary optimization, updating withexperiments, as well as hybrid active/passive vibrationreduction treatments of those systems for their control (as an example let us cite the modeling of “vibration and noise devices” acting as physical interfaces such asvisco/piezo layers).Therefore, attenuation of vibrations and

noise using smart materials such as piezoelectric andmagnetorheological devices will be considered.

The purpose of this presentation will be to give a reviewsynthesis of those aspects and perspectives.

Honors ReceptionSponsored by: Committee on Honors

5:30pm–6:30pmBallroom A Foyer,

David L. Lawrence Convention Center

All registered attendees are invited to attend this reception andmeet this year’s Honors Awards Recipients.

Honors Assembly6:30pm–7:30pm

Ballroom A, David L. Lawrence Convention Center

All registered attendees are cordially invited to attend the 2018ASME Honors Assembly. This multimedia program celebratessome of today’s leading engineers, educators, entrepreneurs,and innovators. This year’s Honors Awards Recipients are:

ASME MEDALThomas J.R. Hughes, Ph.D., FellowThe University of Texas at Austin

For the pioneering development of computer-aided engineering and design technologies disseminated in industrial and commercial software used throughout the world, thereby improving engineering product development;and for originating and leading new fields of computationalengineering research.

HONORARY MEMBERPortonovo Ayyaswamy, Ph.D., FellowUniversity of Pennsylvania

For exceptional contributions to mechanical engineeringthrough a career marked with seminal and groundbreakingresearch scholarship, which has engendered transformationaltechnology transfer for diverse applications; and for exemplaryprofessional service to the worldwide scientific and practicingthermal engineering community.

HONORARY MEMBERAlan Needleman, Ph.D., FellowTexas A&M University

For pioneering research in the fields of computationalmechanics and computational materials science.

HONORARY MEMBERRobert M. Nerem, Ph.D., Fellow

For outstanding contributions to the understanding ofdynamics of blood flow and blood vessels in health anddisease, and the development of tissue engineering forpalliative care; and for leadership in bridging and creatingopportunities for engineers to play a vital role in advancingmedicine.

xxiv

xxv

HONORARY MEMBERFrank E. Talke, Ph.D., FellowUniversity of California, San Diego

For contributions to information storage technology, color inkjet printing, and medical device technology.

M. EUGENE MERCHANT MANUFACTURING MEDAL OFASME/SMEKamlakar Rajurkar, Ph.D., FellowUniversity of Nebraska – Lincoln

For pioneering contributions to enhance the productivity ofnontraditional machining processes used in automobile,aerospace, and medical device manufacturing, includingelectrical discharge machining and electrochemical machiningat macro-, micro-, and nanoscales, through extensive researchin process modeling and in sensing and control techniques.

MELVIN R. GREEN CODES & STANDARDS MEDALRichard William Barnes, FellowANRIC Enterprises Inc.

For distinguished leadership and professionalism in theresearch, development, promotion, acceptance, andapplication of ASME codes and standards; and for directsenior management involvement in the design, construction,and operational support of nuclear power plants.

NANCY DELOYE FITZROY AND ROLAND V. FITZROYMEDALIvar Giaever, Ph.D., MemberApplied BioPhysics, Inc.

For innovative experimental work in superconductor tunnelingthat led to a major advance in the understanding of thephenomenon of superconductivity and to new scientificinstruments.

RALPH COATS ROE MEDALGwynne ShotwellSpaceX

For outstanding leadership in innovation for spacecommercialization and colonization; for technical contributionsto the design of reusable rockets; and for dedication to thepromotion of STEM education.

TUESDAY, NOVEMBER 13

ME/MET Department Heads ProfessionalDevelopment Workshop

10:30am–12:00pmWestmoreland Central & East,

Second Floor,The Westin Hotel

As part of our ongoing effort to provide resources anddevelopment opportunities for department heads/chairs, thisworkshop will explore many topics. Examples from previousworkshops are becoming a department head/chair, fundingpriorities and how to handle budget cuts as well asdevelopment, fund-raising, and alumni engagement.

Heat Transfer Division Awards LuncheonSponsored by: Heat Transfer Division

11:45am–1:45pmPennsylvania East & West,

Second Floor, The Westin Hotel

Ticket: $50

HTD Memorial Award (Science): Dr. Li Shi

HTD Memorial Award (General): Dr. Timothy Fisher

HTD Memorial Award (Art): Dr. M. Pinar Mengüç

Bergles-Rosenhow Young Investigator Award: Dr. AsegunHenry

Guest LuncheonSponsored by: ASME Auxiliary – Celebrating 95 Years!

1:00pm–3:00pmWestmoreland West, Second Floor,The Westin Hotel

Ticket: $40

The ASME Auxiliary welcomes ASME members to an afternoonof great food and refreshments at its semi-annual GuestLuncheon.

The ASME Auxiliary’s guest speaker and past scholarshipwinner will be Vickie Webster-Wood, Ph.D. from CarnegieMellon University. Dr. Webster-Wood’s presentation will be on“Living Machines: Bio-inspired, Bio-hybrid, and OrganicRobots.” Please join us for this exciting presentation.

Symposium for New and Prospective Faculty: Tips for Tenure and Promotion

1:30pm–3:00pmWestmoreland Central & East,

Second Floor,The Westin Hotel

This workshop is designed for junior faculty, postdocs, andPh.D. students. There will be a panel discussion in which thepanel will share insights into the job search, promotion, and thetenure process. The panelists will provide recommendationsfrom their own experience, including best practices and whatto avoid. They will also answer questions from the audience.

Materials Division Sia Nemat-Nasser Award Lectures3:45pm–4:45 pm


Tak-Sing Wong, Department of Mechanical and NuclearEngineering and Materials Research Institute, The PennsylvaniaState University, University Park, Pennsylvania

Tak-Sing Wong is currently an assistantprofessor of mechanical engineering andbiomedical engineering and the inauguralholder of Wormley Family Early CareerProfessorship in Engineering at ThePennsylvania State University. Dr. Wong was

a Croucher Foundation Postdoctoral Fellow at the WyssInstitute for Biologically Inspired Engineering at HarvardUniversity. He received his Ph.D. (2009) in the Mechanical and Aerospace Engineering Department at UCLA and hisB.Eng. (2003) in Automation and Computer-Aided Engineeringfrom The Chinese University of Hong Kong. Dr. Wong’sresearch focuses on surface and interface, micro- andnanomanufacturing, as well as designing multi-functionalbiologically inspired surfaces with applications in water, energy, and health. His research has been published in Nature, Nature Materials, Nature Communications, PNAS, andScience Advances. His work on bio-inspired materials hasbeen recognized with a R&D 100 Award, a National ScienceFoundation CAREER Award, a DARPA Young Faculty Award,as well as an invitation to the National Academy ofEngineering’s U.S. Frontiers of Engineering symposium.Dr. Wong has also been named one of the world’s top 35Innovators Under 35 (formerly TR35) by MIT TechnologyReview and was recognized with the IEEE NanotechnologyCouncil Early Career Award in Nanotechnology and the ASMESia Nemat-Nasser Early Career Award for his contributions inbioinspired materials engineering.

Title: Interfacial Engineering Inspired by Nature

Yihui Zhang, Department of Engineering Mechanics, TsinghuaUniversity, Beijing

Yihui Zhang is an Associate Professor ofEngineering Mechanics at Tsinghua University.He received his Ph.D. in engineeringmechanics from Tsinghua University in 2011.Then he worked as a Postdoctoral Fellow from2011 to 2014 and as a Research Assistant

Professor from 2014 to 2015, both at Northwestern University.He joined the Department of Engineering Mechanics atTsinghua University in 2015 and was tenured in 2018. Hisresearch interests include mechanically guided 3D assembly,soft composite materials, and stretchable electronics. He haspublished more than 90 peer-reviewed journal papers,including two in Science, eleven in Nature sister journals, threein Science Advances, four in PNAS, eight in the Journal of theMechanics and Physics of Solids, three in ACS Nano, and eightin Advanced Functional Materials. His recent awards includeASME Sia Nemat-Nasser Early Career Award (2018), Society ofEngineering Science’s Young Investigator Medal (2018),Eshelby Mechanics Award for Young Faculty (2017), ASME

Melville Medal (2017), Journal of Applied Mechanics Award(2017), MIT Technology Review's 35 Innovators Under 35(TR35 Award) (2016), and Qiu Shi Outstanding Young ScholarAward (2016). He is an associate editor of the Journal ofApplied Mechanics (ASME Transactions), and serves on theeditorial board of several academic journals, includingProceedings of the Royal Society A and npj FlexibleElectronics.

Title: Bio-inspired Soft Network Materials With UnusualMechanical Properties

Materials Division Nadai Medal Award Lecture 4:45pm–5:45pm


The Nadai Medal goes to George M. Pharr for “Measurementof Power Law Creep Parameters by Nanoindentation”

George M. Pharr is TEES Eminent ResearchProfessor in the Department of MaterialsScience and at Texas A&M University,College Station, TX. He received his B.S. inMechanical Engineering at Rice University in1975 and Ph.D. in Materials Science and

Engineering from Stanford in 1979. After one year ofpostdoctoral study at the University of Cambridge, England, he returned to Rice in 1980 as a faculty member in theDepartment of Mechanical Engineering and Materials Science.He moved to the Department of Materials Science andEngineering at the University of Tennessee (UT) in 1998, where he served he as Chancellor's Professor and McKameyProfessor of Engineering. While at UT, he also held a JointFaculty Appointment at the Oak Ridge National Laboratory(ORNL), was Head of the UT Materials Science andEngineering Department, and served as the Director of theUT/ORNL Joint Institute for Advanced Materials. He joined the faculty of Texas A&M in January 2017.

Dr. Pharr received ASM International’s Bradley StoughtonAward for Young Teachers of Metallurgy in 1985. His honorsalso include the Amoco Award for Superior Teaching at RiceUniversity (1994), a Humboldt Senior Scientist Award (2007),the Materials Research Society's inaugural Innovation inMaterials Characterization Award (2010), and the University ofTennessee Macebearer Award (2015). He is a member of theNational Academy of Engineering (2014) and a Fellow of ASMInternational (1995), the Materials Research Society (2012), andTMS (2016). Dr. Pharr has been an Associate Editor of theJournal of the American Ceramic Society since 1990 andPrincipal Editor of the Journal of Materials Research since2012. He is an author or co-author of more than 200 scientificpublications, including four book chapters. His researchfocuses on mechanisms of plasticity and fracture in solids,especially at small scales.

Measurement of Power Law Creep Parameters byNanoindentation

Great progress has been made over the past decade in makingmechanical property measurements at small scales by load-

xxvi

xxvii

and depth-sensing indentation methods, also known asnanoindentation. The ability to make such measurements with sharp pyramidal indenters allows for high point-to-pointspatial mapping of properties as well as the characterization of very thin films, thin surface layers, and even small particlesor individual phases in complex multiphase microstructures.Although most nanoindentation testing has been done at room temperature, recent advances in nanoindentation testing equipment have expanded the horizons to very high temperatures, thus paving the way for the small-scalemeasurement of parameters characteristic of time-dependentcreep deformation, such as the stress exponent, n, and the activation energy, Qc. However, in doing so, seriousexperimental difficulties are often encountered, and how oneconverts the data obtained in nanoindentation tests to theparameters normally used to characterize uniaxial creep is not at all straightforward because of the complex, nonuniformstress state produced during indentation contact.

In this presentation, we report on progress in makingmeaningful measurements of power law creep bynanoindentation based on recent experience with a new hightemperature nanoindentation system capable of testing attemperatures up to 1100°C. Special attention is given to themodels and data analysis procedures needed to convertnanoindentation load-displacement-time data into the creepparameters normally measured in uniaxial tension orcompression testing. The models and procedures areevaluated by comparison to several sets of creep data in whichthe material behavior has been probed both bynanoindentation and by uniaxial testing methods.

AESD Lecture and Reception5:00pm–7:00pm


Frank Kreith Energy Award

William M. Worek, Department of Mechanical and IndustrialEngineering, Texas A&M University—Kingsville, Texas

William M. Worek is Professor of MechanicalEngineering at Texas A&M University–Kingsville, TX. He received all three degrees,B.S., M.S. and Ph.D. from the Illinois Instituteof Technology in 1976, 1977 and 1980. He spent a majority of his career at the

University of Illinois–Chicago, where he was DepartmentHead of Mechanical and Industrial Engineering and Director of the Energy Resources Center.

He has been involved, over the last 35 years, in thedevelopment of desiccant materials for cooling systemsapplications, modeling of sorption processes, experimentaltesting of desiccant material performance and the use ofdesiccant processes in the design of cooling anddehumidification systems. He holds three patents on sorptionsystem design improvements and has published extensively inarchival journals and has given numerous lectures on thesubject. Recently he has expanded his research to investigatethe enhancement when nanofluids are boiled.

Professor Worek was chair of the American Society ofMechanical Engineer’s (ASME’s) Solar Energy Division, Vice-President of ASME’s Energy Resources Group and served as aMember of ASME’s Board of Governors. In addition, he is Fellowof ASME and ASHRAE and has received Edwin F. Church Medalfrom ASME recognizing his accomplishments in engineeringeducation. In addition, Professor Worek Co-editor of Mark’sHandbook for Mechanical Engineering, Executive Editor ofApplied Thermal Engineering and Editor-in-Chief of HeatTransfer – Asian Research.

Title: Challenges in Comfort Cooling: Separating Sensibleand Latent Loads—Material Constraints and NewOpportunities

As buildings have become tighter and as Net Zero EnergyBuildings are designed and implemented, the latent coolingload has increased, and improved performing heating systemsare desired. This presentation will present the status of currenttechnologies and the efforts to improve performance and thecapacity per unit volume (i.e., minimization of footprint) ofheating and cooling systems. Conventional heating systemshave limited efficiencies, many times less than one. Likewise,thermally-activated cooling/dehumidification systems also haverelatively poor efficiencies. This presentation will focus on workdone and new developments in materials and systems that areshowing that performance can be significantly improved.

Applied Mechanics Koiter Lecture5:30pm–6:30pm


Professor M. Taher A. Saif, Edward William and Jane Marr Gutgsell Professor at the University of Illinois Urbana–Champaign

Professor M. Taher A. Saif received his B.S.and M.S. in Civil Engineering from BangladeshUniversity of Engineering and Technology andWashington State University, respectively, in1984 and 1986. He obtained his Ph.D. inTheoretical and Applied Mechanics from

Cornell University in 1993. He worked as a Post DoctoralAssociate in Electrical Engineering and the NationalNanofabrication Facility at Cornell University during 1993–1997. He joined the Department of Mechanical Science andEngineering at the University of Illinois at Urbana–Champaign(UIUC) during 1997. He is currently the Gutgsell Professor inthe department. He is serving as the Associate Head ofGraduate Programs and Research.

Two of Saif's major contributions are: (1) discovery of plasticstrain recovery in nano grained metals and its underlyingmechanism. The finding opens the possibility of developingself-healing metal components; (2) discovery of mechanicaltension in neurons in vivo, and the link between this tensionand neurotransmission. This latter finding links mechanicalforce with memory and learning in animals. His currentresearch includes tumor micro environment, mechanics ofneurons and cardiac cells, development of biologicalmachines, and electro-thermo-mechanical behavior ofnanoscale metals and semiconductors.

xxviii

Saif is a Fellow of the American Society of MechanicalEngineers since 2011. He served as the President of theSociety of Engineering Science during the calendar year 2016.He was a member of the Scientific Advisory Board, Singapore-MIT Alliance for Research and Technology during 2010–2012.He received the Xerox Award for Faculty Research fromUniversity of Illinois at Urbana–Champaign (UIUC) during 2003and 2006. He was a Willett Faculty Scholar, College ofEngineering, UIUC, during 2003–2009.

Title: Living Machines

The industrial revolution of the 19th century marked the onsetof the era of machines that transformed societies. However, allof these machines are non-living and they do not have inherentintelligence. On the other hand, since the discovery of genes,there is a considerable body of knowledge on engineeringliving cells. It is thus appropriate to envision biohybridmachines that are made from engineered scaffolds and livingcells. These machines have the potential of unprecedentedcapabilities, as they would carry the footprints of millions ofyears of evolution. These machines may emerge from aninteraction between the living cells and the micro-nanoscaffolds. In this talk, we will present such an elementarymachine, a small scale swimmer, consisting of a soft slenderstring and rat cardiomyocytes. The string is made from a softpolymeric material by filling a microfabricated channel usingcapillary draw. Cells are cultured on one region of the string.These cells interact with the string as well as with each otherand beat in synchrony as a single actuator. This living actuatorbends the string, and a bending wave propagates from theactuator site toward the end, generating sufficient thrust forswimming. This artificial machine thus swims in fluids as theengineered living swimmer. These swimmers might be used invivo for autonomous intelligent drug delivery.

Noise Control and Acoustics Division Wine & CheeseReceptionSponsored by: Noise Control and Acoustics Division

5:30pm–7:00pmSomerset East, Second Floor,The Westin Hotel

Women in Engineering ReceptionSponsored by: Diversity & Inclusion StrategyCommittee

5:30pm–7:00 pmCrawford East & West,Third Floor,The Westin Hotel

The reception provides a focal point at the conference for agathering of women from the wide range of ASME activity fornetworking and a bit of casual relaxation at the end of aconference day. The event is open to all ASME womenengineers and engineering students.

Materials Division ReceptionSponsored by: Materials Division


Fluids Engineering Division ReceptionSponsored by: Fluids Engineering ExecutiveCommittee

6:30pm–8:30pmPennsylvania West, Second Floor, The Westin Hotel

Applied Mechanics Division Honors & AwardsBanquetSponsored by: Applied Mechanics Division

7:00pm–10:00pmWestmoreland Central & East,

Second Floor, The Westin Hotel

Tickets: $88

The evening’s events will include honoring and presenting thefollowing AMD awards to:

Thomas J.R. Hughes Young Investigator Award: Liping Liu

Ted Belytschko Applied Mechanics Award: Tayfun ErsinTezduyar

Thomas K. Caughey Dynamics Award: Firdaus E. Udwadia

Daniel C. Drucker Medal: David M. Barnett

Warner T. Koiter Medal: M. Taher A. Saif

Timoshenko Medal: Ares J. Rosakis

Journal of Applied Mechanics Best Paper Award: CharlesWojnar

Lloyd H. Donnell Applied Mechanics Reviews Paper Award:Tevis D. B. Jacobs and Ashlie Martini

WEDNESDAY, NOVEMBER 14

Plenary Presentation8:00am–8:45am

(breakfast served from 7:30am to 8:00am)Ballroom A, David L. Lawrence Convention Center

Mark HindsboVice President and General Manager, Design Business Unit,ANSYS

Presentation Title: Innovation in Engineering

Democratization of technology, from the printing press to thegraphical user interface of the PC, has driven profoundchanges to society and innovation. Many of these innovationswere driven by engineers, and now engineering technologiesthemselves are being democratized. Powerful tools such assimulation on-demand manufacturing, for decades the domainof highly specialized experts, are becoming accessible to all.

xxix

Industry veteran Mark Hindsbo will discuss how this newparadigm is reshaping engineering, from the classroom to theworkplace

Presenter Biography: Mark Hindsbo is theVice President and General Manager of theDesign Business Unit at ANSYS, on a missionto deliver “simulation for every engineer and every product.” He has a broad set ofbusiness and technical experiences across

sales, marketing, business strategy, software development,and physics. Mark originally joined ANSYS as the VicePresident of Marketing in June 2015. Prior to ANSYS, he wasmost recently the Sr. Vice President of Customer Success atParallels. He spent over 10 years at Microsoft in roles rangingfrom General Manager in the Server and Tools business group,to Vice President of the Developer business in the US. Prior tothis, he was at The Boston Consulting Group, co-founded adigital agency, and did scientific computing at Novo Nordisk.He holds a Master of Science from the Technical University ofDenmark and has done nuclear research at CERN.

NSF-CMMI Overview and Outreach Panel8:00am–9:45am


In the first part of this panel, an overview of the Civil,Mechanical and Manufacturing Innovation (CMMI) division willbe provided with emphasis on recent changes in organizationalstructure as well as funding opportunities, e.g., the new no-deadline rule. Relevant core programs from the AdvancedManufacturing Cluster, the Mechanics & Engineering MaterialsCluster, and the Resilient and Sustainable InfrastructuresCluster will also be highlighted. In the second part of the panel,the floor will then be opened to participants to addressprogram directors representing these clusters.

2018 IMECE Feedback Session10:00am–11:00am


NSF One-on One Meetings10:00am–5:30pm

NSF one-on-one meeting are arranged by appointment. Forschedule changes and cancellations, please go to the MeetingInformation desk on the third floor of the David L. LawrenceConvention Center.

NSF Proposal Development Workshop10:15am–12:15pm


In this workshop, the fundamentals of successful grantproposal writing for the National Science Foundation (NSF) willbe covered. Participants will learn about key topics, including

the components of a successful proposal and finding the righthome for the research. Critical aspects of the merit reviewprocess, funding profiles, and NSF programs, solicitations, andother opportunities will be presented. This workshop is gearedtoward early career investigators at U.S. institutions seeking tounderstand the NSF merit review process, but the informationprovided will be valuable to principal investigators in any stageof their career seeking to learn more about proposal writingand NSF funding opportunities.

Robert HenryThurston Lecture11:00am–12:00pm


Title: Dynamic Behavior of Materials at High-Strain Ratesand High-Pressures

Thurston Lecture Award to Guruswami (Ravi) Ravichandran forpioneering contributions to dynamic behavior of materials anddevelopment of novel experimental methods.

Dr. Guruswami Ravichandran, John E. Goode, Jr., Professorof Aerospace and Mechanical Engineering, Division ofEngineering and Applied Science California Institute ofTechnology

Guruswami (Ravi) Ravichandran is the John E. Goode, Jr., Professor of Aerospaceand Mechanical Engineering and the OtisBooth Leadership Chair of the Division ofEngineering and Applied Science at theCalifornia Institute of Technology. He received

his B.E. (Honors) in Mechanical Engineering from the Universityof Madras and his Sc.M. in Engineering and AppliedMathematics and Ph.D. in Engineering (Solid Mechanics andStructures) from Brown University. He has held visiting scholarappointments at Ecole Polytechnique, France (CNRS SeniorScientist), Tokyo Institute of Technology (Chair in InternationalCooperation), and Indian Institute of Science (Aditya BirlaChair). He is a member of the National Academy ofEngineering, Academia Europea, and European Academy ofSciences and Arts. He is a Fellow of the American Society ofMechanical Engineers (ASME), Society for ExperimentalMechanics (SEM), and American Academy of Mechanics(AAM). He was named Chevalier de l'ordre des PalmesAcademiques by the Republic of France. His awards includeA.C. Eringen Medal from the Society of Engineering Science,Warner T. Koiter Medal from ASME, and William M. MurrayLecture Award from SEM. His research interests includemechanics of materials (deformation, damage, and failure),dynamic behavior, wave propagation, composites, activematerials, micro-/nanomechanics, biomaterials and cellmechanics, and experimental methods.

Title: Dynamic Behavior of Materials at High-Strain Ratesand High Pressures

Impact, blast, and other dynamic loading events are ofsignificance in numerous engineering applications ranging fromaerospace to automotive to defense to security to space.

At the heart of transient loading events are the propagation ofstress/shock waves, which can cause significant deformationand catastrophic damage and failure. This lecture will focus on the dynamic behavior of materials, in particular, their high-strain rate and high-pressure properties. Experimental methodsbased on the split Hopkinson (Kolsky) compression bar and theplate impact technique are reviewed. These experimentalmethods have been used to investigate the dynamic materialbehavior under extreme conditions, strain rates ~1 million/s,and pressures ~100 GPa. Studies on the constitutive behaviorof ductile metals using the shear-compression specimen arediscussed. In situ temperature measurements using high-speed infrared thermography are used to determine thefraction of plastic work converted to heat. A plate impacttechnique based on the Mach lens concept to achieve highpressures is illustrated. For a given impact velocity, thistechnique can help increase the range of pressures fordetermining the equation of state for materials. Shock waveexperiments in heterogeneous materials illustrating their abilityto mitigate damage through dispersion are presented. Materialparameters controlling the rise time of the shock and theeffective viscosity are identified. Theoretical analysis andnumerical simulations are used to gain insights into shockwave propagation in heterogeneous composite materials.

NSF-CBET Program Overview and Initiatives1:30pm–3:15pm


In this event, an overview of the Chemical, Bioengineering,Environmental, and Transport Systems (CBET) Division will be provided with emphasis on programs and fundingopportunities. The floor will then be opened to participants to ask questions.

NSF Student Competition (Posters Only)Hall B, David L. Lawrence Convention Center

Poster Setup 10:00am–11:45amGeneral Viewing/Judging 11:45am–2:30pmAwards 2:30pm–3:00pm

Virtual Podium (Posters Only)Poster Setup 10:00am–11:45amGeneral Viewing 11:45am–2:30pm

2019 IMECE Track Organizers and Co-OrganizersMeeting


IMECE Volunteer and Student Recognition Reception5:30pm–7:00pm

Westmoreland Central, Second Floor,The Westin Hotel

Aerospace Division ReceptionSponsored by: Aerospace Division

5:45pm–7:15pmPennsylvania West, Second Floor,The Westin Hotel

THURSDAY, NOVEMBER 15

Closing Plenary Lunch12:40pm–2:00pm

(lunch served from 12:40pm to 1:10pm)Ballroom A, David L. Lawrence Convention Center

Vijay Kumar Nemirovsky Family Dean of Penn Engineering, University ofPennsylvania

Presentation Title: AI, Robotics, Automation, and the Futureof Work

We are living in a world where exponential growth incomputing, communication, and storage are driving a newirrational exuberance in technology. The graduating engineersin 2018 will see computers that are six orders of magnitudefaster than when they were born. Clearly no exponential can be forever! But there is no doubt that this growth is leading to automation, which is already having a transformationaleffect on our society. What does this mean for the future ofmechanical engineering and related disciplines? This talk willdebate the basis for the irrational exuberance, especially in the area of autonomous drones and self-driving cars, andopportunities for engineers and engineering education.

Presenter Biography: Vijay Kumar is theNemirovsky Family Dean of Penn Engineeringwith appointments in the Departments ofMechanical Engineering and AppliedMechanics, Computer and InformationScience, and Electrical and Systems

Engineering at the University of Pennsylvania. Since 1987, he has served Penn Engineering in many capacities, includingDeputy Dean for Research, Deputy Dean for Education,Chairman of the Department of Mechanical Engineering andApplied Mechanics, and Director of the GRASP Laboratory, amultidisciplinary robotics and perception laboratory. Dr. Kumarhas served as the assistant director of robotics and cyberphysical systems at the White House Office of Science andTechnology Policy (2012–2013). He received his Bachelor ofTechnology degree from the Indian Institute of Technology,Kanpur and his Ph.D. from The Ohio State University in 1987.

Dr. Kumar maintains an active research portfolio with interestsin robotics, specifically multi-robot systems, and micro aerialvehicles. He is a Fellow of the American Society of MechanicalEngineers (2003), a Fellow of the Institute of Electrical andElectronic Engineers (2005), and a member of the NationalAcademy of Engineering (2013). Dr. Kumar is also the recipientof the 1991 National Science Foundation Presidential YoungInvestigator award, the 1996 Lindback Award for Distinguished

xxx

Teaching (University of Pennsylvania), the 1997 FreudensteinAward for significant accomplishments in mechanisms androbotics, the 2012 ASME Mechanisms and Robotics Award,the 2012 IEEE Robotics and Automation Society DistinguishedService Award, a 2012 World Technology Network Award, a2014 Engelberger Robotics Award, and the 2017 IEEERobotics and Automation Society George Saridis LeadershipAward in Robotics and Automation.

HONORING SYMPOSIAMONDAY, NOVEMBER 12 9:45am–11:30am;

1:45pm–3:30pm; 3:45pm–5:30pm, Room 324David L. Lawrence Convention Center

Topic 10-60 Symposium in Honor of Prof. Frank Kreith

This Symposium is organized in honor and memory of the lateProfessor Frank Krieth, NAE, ASME Honorary Member, ASMEMedal and to celebrate his life, legacy, and the many years ofservice and contributions in heat transfer, solar energy,alternative energy, and sustainability, which have bridgedresearch in mechanical engineering with applications in mostother engineering disciplines.

HONORING SYMPOSIAWEDNESDAY, NOVEMBER 14

1:45pm–5:30pm, Room 326David L. Lawrence Convention Center

Topic 9-8 Kirti (Karman) Ghia Celebration of LifeSymposium

Over the past five decades, Professor Kirti (Karman) Ghia made significant contributions to ASME, AIAA, and APS fluidsactivities through his research publications, conference andsession organization, and committee administration. Karmanwas an effective teacher and researcher of Computational Fluid Dynamics and has published extensively on a number of topics. We as a community were saddened to learn ofKarman’s passing on June 13, 2017, following a suddenillness. This symposium has been organized to celebrate his life as a distinguished member of our fluids community.

HONORING SYMPOSIAWEDNESDAY, NOVEMBER 14

3:45pm–5:30pm, Room 318David L. Lawrence Convention Center

Topic 7-9 Pre-College (K-12) STEM, RET – University,School and Industry Alliance (In Honor of Late ProfessorDevdas Pai)

This topic welcomes K-12 outreach efforts by universities andtheir industry partners. Modules of research and principles ofengineering presented to the middle and high school studentsand teachers will be particularly beneficial to the audience.Similarly, outreach to high school students in the form ofinnovative engineering activities on college campuses can alsobe presented to the peers attending the sessions. ResearchExperiences for Teachers would be appropriate under thistopic.

HONORING SYMPOSIATHURSDAY, NOVEMBER 15

8:55am–12:35pm, Room 306David L. Lawrence Convention Center

Topic 3-6 Lightweight Sandwich Composites and LayeredStructures – (In Honor of Prof. Frostig)

This symposium will bring together prominent investigators inthe areas of sandwich structures and multilayered compositeshonoring the outstanding contribution of Professor Yehoshua(Shuki) Frostig from the Technion – Israel Institute ofTechnology to applied mechanics in general, and particularly,to higher-order theories of sandwich structures. Theoreticalmodels developed by Professor Frostig provide an accurateanalytical tool to characterize the global and local response of sandwich structures, accounting for realistic deformationsin the core. These contributions have been verified anduniversally accepted for the characterization of the response of sandwich structures to both global and local loads. Thecolleagues of Professor Frostig will present their original workpertinent to the areas of his research in acknowledgement ofhis original and valuable studies that have a lasting andprominent effect in our field of mechanics.

xxxi

NOTES

xxxii

xxxiii

Track 1: Acoustics, Vibration, and Phononics 1-13-1: ACOUSTICS, VIBRATION, AND PHONONICS

PLENARYTuesday, November 13, 8:00am–8:45am


Active Acoustic Metamaterials(IMECE2018-90090)

Amr Baz University of Maryland, College Park

Abstract: A class of active acoustic metamaterials (AAMM) isdeveloped with desirable controlled distributions of effectivedynamic properties or intensity of wave propagation. Theproposed AAMM consists of an array of acoustic cavitiesseparated by piezoelectric boundaries and arranged to formacoustic waveguides. The flexible piezoelectric boundaries arecontrolled to generate desirable acoustic properties or waveenergy distribution along the wave guide in an attempt todevelop acoustic cloaks or non-reciprocal diodes. Robustcontrol strategies are formulated to achieve the desirableclosed-loop control characteristics of this class of acousticmetamaterials while rejecting the effect the external wavepressure disturbances. The time response characteristics ofthe AAMM are investigated and presented for variousparameters of the robust controllers in order to demonstratethe merits of the proposed controllers. Applications of theproposed work are outlined, ranging from exterior and interioracoustic cloaks to non-reciprocal switching acousticmetamaterials.

Bio: Dr. Amr Baz is a Minta Martin Professor ofMechanical Engineering and the Director ofthe Smart Materials and Structures ResearchCenter at the University of Maryland, CollegePark. He holds a B.Sc.’66 from CairoUniversity, as well as M.Sc.’70 and Ph.D.’73

from the University of Wisconsin, Madison. Dr. Baz’s researchinterests span the areas of active and passive control ofvibration and noise using smart structures, constrained layerdamping treatments to control sound radiation in structures, aswell as active acoustic metamaterials. Dr. Baz has publishedmore than 150 archival journal papers, seven book chapters,and holds nine US patents. He is a Fellow of the AmericanSociety of Mechanical Engineers and a recipient of Egypt’sPresidential Award & First Class Medal for Best Achievementsin Science and Arts. Dr. Baz received the ASME AdaptiveStructures and Material Systems Prize (2009), the Pi-Tau-Sigma Purple Cam-Shaft Teaching Award (2009), the SPIESmart Structures Lifetime Achievement Award (2011), thePoole and Kent Teaching Award (2015), as well as theDistinguished Scholar award from UMD (2015). He serves onthe editorial boards of the following journals: Journal ofVibration and Control, Smart Structures and Systems, andMechanics of Advanced Materials and Structures. He alsoserved as Chairman of the ASME National Capital Chapter(1990–1991), Member of ASME Edwin Church Medal Award(1993–2002), and Chair and Co-Chair of the SPIE SmartStructures and Integrated Systems Conference (2002–2003).

Track 2: Advanced Manufacturing2-1: ADVANCED MANUFACTURING PLENARY

Wednesday, November 14, 9:00am–9:45amRoom 305, David L. Lawrence Convention Center

Manufacturing for X(IMECE2018-90091)

Jian CaoNorthwestern University

Abstract: The future of manufacturing is envisioned to be amixture of customized manufacturing and concentratedmanufacturing. To enable the versatility of manufacturingprocesses and to fully integrate design and manufacturing forsystem optimization, at the Advanced ManufacturingProcesses Laboratory of Northwestern, research efforts arerooted in discovering new processes and enhancing thepredictability of manufacturing processes using the ICME(integrated computational materials engineering) approach.This talk will provide an overview about those activities andthen focus on selective processes and their fundamentals,which may include metal-based powder-blown additivemanufacturing, laser processes for surface texturing,electrospinning, dieless sheet forming, carbon-fiber reinforcedcomposites forming, etc.

Bio: Dr. Jian Cao (MIT’95, MIT’92, SJTU’89)is the Cardiss Collins Professor, Director ofNorthwestern Initiative for ManufacturingScience and Innovation, and an AssociateVice President for Research (AVPR) atNorthwestern University. She was at the

National Science Foundation as a program director for twoyears. Professor Cao is an elected Fellow of ASME, SME, andthe International Academy for Production Engineering (CIRP).Her major awards include the Charles Russ Richards MemorialAward (2017) from ASME and Pi Tau Sigma, SME Frederick W.Taylor Research Medal (2016), ASME Blackall Machine Tooland Gage Award (2012, 2018), ASME Young Investigator Award(2006) from ASME Division of Applied Mechanics, and NSFCAREER Award. Prof. Cao is the Editor-in-Chief of Journal ofMaterials Processing Technology. She served as President ofthe SME North America Manufacturing Research Institute andChair of ASME Manufacturing Engineering Division. She is arecipient of the ASME Dedicated Service Award (2011). As anAVPR, Prof. Cao fosters the collaboration between the physicalsciences and engineering and the other disciplines across andbeyond Northwestern. She is a Board member of mHUB,Chicago's first innovation center focused on physical productdevelopment and manufacturing.

TRACK PLENARY

xxxiv

Track 3: Advances in Aerospace Technology3-20-1: ADVANCES IN AEROSPACETECHNOLOGY

PLENARY IWednesday, November 14, 9:00am–9:45am


Rapid, Physics-Based Reduced Order Modeling ofNonlinear Aerodynamics(IMECE2018-90092)

Marilyn SmithGeorgia Institute of Technology

Abstract: The ability to rapidly obtain accurate static andunsteady loads and moments on complex aerodynamic andbluff bodies has been one of the major deficiencies in nextgeneration vehicle design, including agile unmanned aerialsystems (UAS) and in tethered loads analysis such as slung,crane, towed, and parachute configurations. Two reduced-order models (ROM) that build up complex shape simulation ofquasi-steady loads and moments and then extend the quasi-steady analysis to unsteady applications have been developed.Because the ROMs are based on quasi-empirical theory, themethods are applicable to a wide range of configurations andrapid enough for use in early design and simulation tools.Validation with computations, wind tunnel experiments, andflight tests has demonstrated significant improvements inpredictions over current approaches for design and analysis.Demonstrations include control law design for agile UAS andhelicopter slung load handling qualities and stability analysis.

Bio: Dr. Marilyn Smith is a Professor in theSchool of Aerospace Engineering at theGeorgia Institute of Technology and AssociateDirector of the Georgia Tech Vertical LiftResearch Center of Excellence. She previouslyworked at Lockheed-Georgia Company

(Lockheed-Martin) and McDonnell-Douglas Helicopters(Boeing-Mesa). Her research encompasses computationalunsteady aerodynamics and aeroelasticity for complexconfigurations. She is currently developing reduced-ordermodels for nonlinear applications in active flow control, bluffbodies, and turbulence. She is a Technical Fellow of AHS andAIAA Fellow. She has twice been a team member for AHSAgustaWestland International Fellowship Awards and NASAGroup Achievement Awards. She currently serves on the AHSBoard of Directors and AHS Technical Council, as well asAssociate Editor for the Journal of Fluids and Structures, AIAAJournal, Journal of the American Helicopter Society, and theAeronautical Journal.

Track 3: Advances in Aerospace Technology3-20-2: ADVANCES IN AEROSPACE TECHNOLOGY

PLENARY IIWednesday, November 14, 8:00am–8:45am


On the Flightpath to Adaptive Aerospace Structures:Articulated Tensegrity(IMECE2018-90093)

George LesieutrePennsylvania State University

Abstract: Adaptive structures are flying and the field isadvancing. This talk will trace key developments in adaptiveflight structures technology from circa 1970 to present-day.Such developments include advances in materials, devices,control, structural integration, and design—as well asapplications to space and flight vehicles. Articulated tensegrityspace structures provide a recent example. A noveldeployment strategy for cylindrical tensegrity masts starts froma Class-1 configuration having high packaging efficiency and—through a multi-stage deployment process—ending as aClass-2 tensegrity having higher stiffness. Strut lengths arefixed and articulation is achieved via active cables. Designoptimization revealed packaging efficiency and deployedstiffness exceeding that of existing technology, and an initialbenchtop realization was demonstrated. The talk will alsoaddress the relatively slow process of technology maturationand adoption, and provide context from the historicaldevelopment of aeronautical materials and structures.Continuing advances promise a bright future. Such advancesinclude acoustic metamaterials for damping; energy harvesting,miniature sensors, and low-power electronics and software forconditioning monitoring and prognosis; and additive 3-Dmanufacturing for complex heterogenous structures.

Bio: Dr. George Lesieutre is Associate Deanfor Research and Graduate Studies andProfessor of Aerospace Engineering at PennState. He recently completed terms asDepartment Head and Director of the Centerfor Acoustics and Vibration. He earned a B.S.

in Aeronautics and Astronautics from MIT and a Ph.D. inAerospace Engineering from UCLA. Prior to joining Penn State,he held positions at SPARTA, Rockwell Satellite Systems,Allison Gas Turbines, and Argonne National Lab. His researchinterests include structural dynamics of aerospace systems,including passive damping, active structures, and energyharvesting. Dr. Lesieutre served as PI of several major DARPAprograms in adaptive structures and has received five societybest paper awards. He has advised more than 60 graduatestudents and has published more than 300 technical articlesand patents. Dr. Lesieutre is a Fellow of AIAA, served a term on the AIAA Board of Directors, and served as General Chair of the AIAA Science and Technology Forum (SciTech 2015). An instrument-rated private pilot, he once paddled a canoefrom Montreal to the Gulf of Mexico as part of a historicalreenactment and, more recently, ran a 50-mile ultramarathon.

TRACK PLENARY

xxxv

TRACK PLENARY

xxxvi

Track 4: Biomedical and BiotechnologyEngineering4-1-1: BIOMEDICAL AND BIOTECHNOLOGY PLENARY I


Acoustofluidics: Merging Acoustics and Microfluidics forBiomedical Applications(IMECE2018-90094)

Tony Jun Huang Duke University

Abstract: The past two decades have witnessed an explosionin lab-on-a-chip research with applications in biology,chemistry, and medicine. The continuous fusion of novelproperties of physics into microfluidic environments hasenabled the rapid development of this field. Recently, a newlab-on-a-chip frontier has emerged, joining acoustics withmicrofluidics, termed acoustofluidics. Here we summarize ourrecent progress in this exciting field and show the depth andbreadth of acoustofluidic tools for biomedical applicationsthrough many unique examples, from exosome separation tocell-cell communications to 3D bioprinting, from circulatingtumor cell isolation and detection to ultra-high-throughputblood cell separation for therapeutics, and from high-precisionmicro-flow cytometry to portable yet powerful fluidmanipulation systems. These acoustofluidic technologies arecapable of delivering high-precision, high-throughput, andhigh-efficiency cell/particle/fluid manipulation in a simple,inexpensive, cell-phone-sized device. More importantly, theacoustic power intensity and frequency used in theseacoustofluidic devices are in a similar range as those used inultrasonic imaging, which has proven to be extremely safe forhealth monitoring during various stages of pregnancy. As aresult, these methods are extremely biocompatible; i.e., cellsand other biospecimen can maintain their natural stateswithout any adverse effects from the acoustic manipulationprocess. With these unique advantages, acoustofluidictechnologies meet a crucial need for highly accurate andamenable disease diagnosis (e.g., early cancer detection andmonitoring of prenatal health) as well as effective therapy (e.g.,transfusion and immunotherapy).

Bio: Tony Jun Huang is William BevanProfessor of Mechanical Engineering andMaterials Science at Duke University.Previously, he was a Professor and The HuckDistinguished Chair in Bioengineering Scienceand Mechanics at The Pennsylvania State

University. He received his Ph.D. in Mechanical and AerospaceEngineering from the University of California, Los Angeles(UCLA) in 2005. His research interests are in the fields ofacoustofluidics, optofluidics, and micro/nano systems forbiomedical diagnostics and therapeutics. He has authored/co-authored over 190 peer-reviewed journal publications inthese fields. His journal articles have been cited more than11,000 times, as documented at Google Scholar (h-index: 59).He also has 20 patents and invention disclosures. He waselected a fellow of the following five professional societies:

the American Institute for Medical and Biological Engineering(AIMBE), the American Society of Mechanical Engineers (ASME),the Institute of Electrical and Electronics Engineers (IEEE), theInstitute of Physics (IOP), and the Royal Society of Chemistry(RSC). Huang’s research has gained international recognitionthrough numerous prestigious awards and honors, including a 2010 National Institutes of Health (NIH) Director’s NewInnovator Award; a 2012 Outstanding Young ManufacturingEngineer Award from the Society for Manufacturing Engineering;a 2013 American Asthma Foundation (AAF) Scholar Award;JALA Top Ten Breakthroughs of the Year Award in 2011, 2013, and 2016; the 2014 IEEE Sensors Council Technical AchievementAward from the Institute of Electrical and Electronics Engineers(IEEE); and the 2017 Analytical Chemistry Young InnovatorAward from the American Chemical Society (ACS).

Track 4: Biomedical and BiotechnologyEngineering4-1-2: BIOMEDICAL AND BIOTECHNOLOGY PLENARY II


New Directions in Medical Ultrasound(IMECE2018-90095)

Dr. Mostafa Fatemi Mayo Clinic

Abstract: Traditional diagnostic ultrasound has evolved from asimple anatomical imaging tool to a sophisticated technologythat involves quantifying tissue properties and function frommolecular level to the organ level. Many disease processescause microscopic changes in tissue that may includealteration of a tissue’s mechanical properties and, in somecases, changes in microvasculature network. Ultrasonicmethods for measuring such changes in the human body are of great interest. The fact that ultrasound is noninvasive andcapable of making measurements at sufficient depths in thebody makes this technology a prime candidate for developingnew diagnostic tools. This talk will cover some newmethodologies in medical ultrasound, including novel methodsin estimating tissue viscoelasticity and new techniques forimaging microvasculature networks with high definition andstudying their architecture in the targeted tissue.

Bio: Mostafa Fatemi received his Ph.D. in Electrical Engineeringfrom Purdue University. Currently, he is a Professor ofBiomedical Engineering at the Department of Physiology andBiomedical Engineering of Mayo Clinic College of Medicine inRochester, MN. At the Mayo Clinic, he is also a member of theMayo Clinic Cancer Center, Cancer Imaging Program, and theCenter for Clinical and Translational Science. In addition, he isa Professor of the Biomedical Informatics and ComputationalBiology graduate program at the University of MinnesotaRochester. Dr. Fatemi’s current research areas includeultrasonic methods for tissue viscoelasticity estimation and itsapplications in cancer imaging and bladder function evaluation.His past and current research activities have been funded bythe National Institutes of Health, National Science Foundation,Department of Defense Medical Research Program, Komen

Breast Cancer Foundation, and Minnesota PartnershipProgram. He has published extensively in the field of medicalultrasound and holds 11 patents in this field. Dr. Fatemi hasbeen awarded Fellow membership by these institutions:Institute of Electrical and Electronics Engineers (IEEE),American Institute of Medical and Biological Engineering(AIMBE), Acoustical Society of America (ASA), and AmericanInstitute of Ultrasound in Medicine (AIUM). He is also arecipient of the IEEE-UFFC Distinguished Lecturer award for2016–2017.

Track 5: Design, Reliability, Safety, and Risk5-19-1 DESIGN, RELIABILITY, SAFETY, AND RISK

PLENARYTuesday, November 13, 8:00am–8:45am


Autonomous Vehicle Safety: Tomorrow’s Rewards versusToday’s Reality(IMECE2018-90096)

Roger L. McCarthyMcCarthy Engineering

Abstract: No vehicle technology has caused more excitement,investment, than potential vehicle “autonomy” (SAE or NHTSAlevel 4 & 5). Since the “critical pre-crash event” of ~94% ofU.S. traffic accidents is a “driver critical reason(s),” vehiclesdriven by a fast-autonomous agent that does not blink, sleep,drink, etc., spawn “predictions” of unprecedented safetyimpact. Autonomous vehicle potential to revolutionize westerneconomies is inestimable. The 8% utilization of currentautomobiles could increase 10X as autonomous cabs. The vasttracts of real estate now dedicated to roadside parking,driveways, and garages could be reclaimed. Unfortunately, the“hype” surrounding all U.S. self-driving vehicles, even thoughthey are using somewhat different technologies, significantlyoverstates the current capabilities of the technology, and theforeseeable improvements in the next few years, to operate onnormal roads interacting with human drivers. This is apart fromhaving no demonstrated ability in snow or rain. The earlyoverall crash rates for self-driving prototype vehicles underideal conditions has been less than promising, even thoughvirtually always the fault of the other driver. Because of thesechallenges and issues of lability, security, and privacy, the mostsignificant active accident prevention will increasingly resultfrom the deployment of automatic “backup” systems thatmonitor the driver, automatically intervene to prevent crashes,but don’t actively drive. An example is 99% of new vehicles inthe U.S. market by 2022 will have an automatic emergencybraking (AEB) system.

Bio: Dr. Roger L. McCarthy is the founder andowner of McCarthy Engineering. Dr. McCarthyserves on the Board of Shui on Land (SOL),Ltd. ( ), which is publicly traded(stock code 0272) on the Hong KongExchange. Dr. McCarthy was formerly

employed by Exponent, Inc. (NASDAQ symbol “EXPO”),headquartered in Menlo Park, CA. Dr. McCarthy joined

Exponent, then Failure Analysis Associates, Inc., (FaAA) in1978, and retired in 2009 where, during his 30+-year tenure, he was variously CEO, Chairman, and Chairman Emeritus. Dr. McCarthy has published extensively on vehicle accidents,using large scale vehicle accident databases to addressquestions of automotive design. In 2004, Dr. McCarthy waselected to the U.S. National Academy of Engineering (NAE)with the citation: “For major contributions to improved vehiclesafety and for methods of quantitative assessment of thereliability of complex mechanical systems.” In 1992, thenPresident Bush appointed Dr. McCarthy to a two-year term onthe President’s Commission on the National Medal of Science.Dr. McCarthy holds a Ph.D. from the Massachusetts Institute of Technology (MIT) in Mechanical Engineering and four otheracademic degrees. Dr. McCarthy has investigated some of the major disasters of the current age, most recently theDeepwater Horizon Explosion, Fire, and Oil Spill in the Gulf ofMexico for Secretary of the Interior Salazar. He has appearedon The History Channel, Myth Busters, Discovery, ModernMarvels, and the National Geographic Channel.

Track 6: Dynamics, Vibration, and Control6-1-1 DYNAMICS, VIBRATION, AND CONTROL

PLENARYTuesday, November 13, 8:00am – 8:45am


Complex Modal Decomposition for Traveling Waves andNonsynchronous Oscillations(IMECE2018-90097)

Brian FeenyMichigan State University

Abstract: Characteristic patterns of nonsynchronousoscillations and traveling waves can be described in terms of complex modes. We extract complex modes from data byusing modal decompositions that are generalizations of properorthogonal decomposition. These decomposition methods are based on the availability of sampled sensed quantitiesdistributed across a structure of interest and may include, for example, displacements, velocities, and/or accelerations.An eigenvalue problem produces optimal weighted signalenergy distributions that are interpreted as modes. Basic ideas of three methods are discussed, as is the use of complexmodes and modal coordinates for quantifying features ofnonsynchronous and traveling-wave motion. The methods areapplied to a variety of systems, including structural wavepropagation and bio-locomotion.

Bio: Brian Feeny is a Professor in theDepartment of Mechanical Engineering atMichigan State University. He received hisB.S., M.S., and Ph.D. in Mechanics from theUniversity of Wisconsin—Madison (1984), the Virginia Polytechnic Institute and State

University (1986), and Cornell University (1990), respectively,and then held a postdoctoral position at the Institute ofRobotics, ETH in Zurich, Switzerland. He is a Fellow of theAmerican Society of Mechanical Engineers (ASME), for which

TRACK PLENARY

xxxvii

he has been an Associate Editor for the Journal of Vibrationand Acoustics and Journal of Computational and NonlinearDynamics, and has served as chair of the ASME TechnicalCommittee on Vibration and Sound. He is the director of hisdepartment’s student exchange program between MSU andRWTH Aachen. His research interests are in dynamics andvibration, with current activities in nonlinear dynamics, modaldecomposition, nonlinear waves, friction dynamics, and systemidentification, and with applications to wind turbines, pendulumvibration absorbers, and bio-locomotion.

Track 7: Engineering Education7-13-1 ENGINEERING EDUCATION PLENARY


Lessons and Perspectives on Transformational EngineeringEducation: Past, Present, and Future(IMECE2018-90098)

Harvey Borovetz University of Pittsburgh

Abstract: This plenary talk is dedicated to Dr. Devdas MizarPai, a longtime contributor to the Engineering Education trackat IMECE whose sudden demise on August 19, 2017 impactedus in many ways; his transformational vision of engineeringeducation lives on. Drawing from his life, Dr. Borovetz will paintthe vision for engineering education in the 21st century. Thelack and the need of a Science, Engineering, Technology, andMathematics (STEM) workforce has been emphasized morethan ever by the many initiatives undertaken by the NationalScience Foundation, such as its STEM Scholarships foracademically talented and financially disadvantaged students.There is quite a dearth of underrepresented minorities, includingwomen, in mechanical engineering and other engineeringdisciplines. Numerous and diverse outreach programs in K-16are quintessential in keeping the current generation of students engaged in our engineering education enterprise. These programsinclude student-mentor interaction, student-faculty interaction,peer learning, living learning communities, shadowingexperiences with engineers in industry, and above all, inclusiveexcellence. Besides programs such as Research Experiencesfor Undergraduates and Teachers, we need to invest in YoungScholar Institutes to impact engineering education. The holisticdevelopment of graduates is an important theme to sustain theSTEM workforce in the future. This talk will not only highlightDr. Pai’s many valuable contributions to STEM education andoutreach and their impact, but also the lessons for us regardinginclusive excellence and other strategies to address challengesand sustain transformational engineering education programsnationwide.

Bio: Dr. Harvey Borovetz is a distinguishedprofessor and former chair in the Departmentof Bioengineering, Swanson School ofEngineering at the University of Pittsburgh. He holds several other professorships innumerous departments in both engineering

and medicine. Dr. Borovetz is a Fellow of the American Institute

for Medical and Biological Engineering, a Fellow of the Councilon Arteriosclerosis, American Heart Association, and InauguralFellow of the Biomedical Engineering Society (BES). He servedon the BES Board of Directors. He led from the front onnumerous cutting-edge research and education initiatives inengineering education working with colleagues across manyU.S. institutions. Dr. Borovetz served on the Scientific AdvisoryBoards of the University of Louisville Speed Scientific School,the University of Massachusetts, the Departments ofBioengineering at Bucknell University, the Cleveland ClinicFoundation, UCLA, Rutgers University, and Pennsylvania StateUniversity. He has also served on numerous NIH and NSFstudy sections, as a member of the Literature SelectionTechnical Review Committee, National Library of Medicine, as an ad hoc reviewer on the Scientific Advisory Committee ofthe Whitaker Foundation, and as a reviewer for The WhitakerInternational Fellows and Scholars Program. Dr. Borovetz'scurrent research interests are focused on the design andclinical utilization of cardiovascular organ replacements forboth adult and pediatric patients. He will share examples ofinclusive excellence from his role as Executive Director of anNSF Engineering Research Center. His many students in theSTEM workforce, such as Dr. Mike Lowell, President ofMarquette University, are a testament to his leadership inengineering education. Dr. Borovetz’s distinguished record inengineering education includes many laurels, such as 2007Carnegie Science Center Life Sciences Award and the 2016Swanson School of Engineering Award for Diversity. He willspringboard his vast experience to guide us in how we cantransform engineering education for the students of the 21stcentury.

Track 8: Energy8-17 ENERGY PLENARY

Tuesday, November 13, 8:00am–8:45amRoom 302, David L. Lawrence Convention Center

Thoughts on the Future of Power Generation: A LowCarbon Perspective(IMECE2018-90099)

Ahmed F. GhoniemMassachusetts Institute of Technology

Abstract: Increasing environmental concerns related to energyuse are driving systems for electricity generation toward low-carbon alternatives. This presentation summarizes currentapproaches and outlines future developments and researchneeds for transitioning towards sustainable electricitygeneration. The speaker will present information regardingrenewables and CCS technologies, centralized anddecentralized generation, and advanced energy conversionsystems, and also highlighting the strategic role of formingfuture energy engineers in the field of advanced energysystems and approaches.

TRACK PLENARY

xxxviii

Bio: Ahmed Ghoniem the Ronald C. CraneProfessor of Mechanical Engineering, Directorof the Center for Energy and PropulsionResearch and the Reacting Gas DynamicsLaboratory at MIT. He received his B.Sc. andM.Sc. degree from Cairo University, and Ph.D.

at the University of California, Berkeley. His research coverscomputational engineering with application to turbulence andcombustion, multiphase flow and multiscale phenomena, clean energy technologies with focus on CO2 capture,renewable energy and alternative fuels. His research has made fundamental contributions to multiscale simulations,thermochemistry, combustion dynamics, energy systems andmaterials chemistry. He supervised more than 100 M.Sc., Ph.D.and post-doctoral students, many are leaders in academia,industry and governments; published more than 500 refereedarticles in leading journals and conferences; lecturedextensively around the World; and consulted for the aerospace,automotive and energy industry. He is fellow of the AmericanSociety of Mechanical Engineer (ASME), the American instituteof Physics (APS), the Combustion Institute (CI), and associatefellow of the American Institute of Aeronautics andAstronautics (AIAA). He received several prestigious awardsincluding the ASME James Harry Potter Award inThermodynamics, the AIAA Propellant and Combustion Award,the KAUST Investigator Award and the Committed to“Committed to Caring Professor” at MIT.

Track 9: Fluids9-17-1: FLUIDS ENGINEERING PLENARY I


Microfluidic Rheometry of Complex Fluids(IMECE2018-90100)

Gareth H. McKinley MIT

Abstract: The development and growth of microfluidics hasstimulated interest in the behavior of complex liquids inmicroscale geometries and provided a rich platform forrheometric investigations of non-Newtonian materialphenomena at small scales. Microfluidic techniques presentthe rheologist with new opportunities for measurement of fluidproperties and enable the systematic investigation of strongelastic effects at very high deformation rates without thecomplications of fluid inertia. In this presentation, we providean overview of the use of microfluidic devices to measure bulkrheology and onset of viscoelastic flow instabilities in bothshear and extensional flows, using a combination of localvelocimetric imaging, mechanical measurements of pressuredrop, and full-field optical probes of flow-inducedbirefringence. Steady and time-dependent flows of a range ofdilute polymer solutions and wormlike micellar fluids areconsidered. The ability to rapidly and precisely fabricatecomplex flow geometries also enables us to exploit thepredictions of computational optimization and design, from firstprinciples, an optimized shape cross-slot extensionalrheometer (or OSCER) that achieves homogeneous planar

extensional kinematics and large fluid strains. Localbirefringence measurements along the stagnation streamlines,combined with bulk measurements of the excess pressuredrop across the device, provide self-consistent estimates ofthe extensional viscosity over a wide range of deformationrates up to 1000 s–1. The results are also in close agreementwith numerical simulations based on a finitely extensiblenonlinear elastic (FENE) dumbbell model. As the imposedextension rate in the OSCER device is increased, thehomogeneous planar elongational flow ultimately becomesunstable. High-frame rate video-imaging of the birefringencefield is used to construct space-time diagrams of the evolutionin the flow for seven different polymer solutions and toconstruct the first stability diagram for planar extensional flowsin cross-slot devices. The mode of instability is found todepend on the elasticity number (El = Wi/Re) of the fluid, with asteady symmetry-breaking purely-elastic bifurcation observedat high El >> 1, and time-dependent three-dimensional inertio-elastic instabilities dominant for El < 1.

Bio: Gareth H. McKinley is the School ofEngineering Professor of Teaching Innovationwithin the Department of MechanicalEngineering at MIT. He received his B.A. andM.Eng. from the University of Cambridge andhis Ph.D. (1991) from the Chemical

Engineering Department at MIT. He taught in the Division ofEngineering and Applied Sciences at Harvard from 1991 to1997 and was an NSF Presidential Faculty Fellow from 1995 to1997. He won the Annual Award of the British Society ofRheology in 1995 and the Frenkiel Award from the APS Divisionof Fluid Dynamics in 2001. He served as Executive Editor ofthe Journal of Non-Newtonian Fluid Mechanics from 1999 to2009 and as Associate Editor of the Journal of Fluid Mechanicsfrom 2007 to 2009. He most recently served as the AssociateDepartment Head for Research of the Mechanical EngineeringDepartment at MIT from 2008 to 2013. He is also a co-founderof Cambridge Polymer Group. His research interests includeextensional rheology of complex fluids, non-Newtonian fluiddynamics, microrheology and microfluidics, field-responsivefluids, super-hydrophobicity, wetting of nanostructuredsurfaces, and the development of nanocomposite materials. He is the author of over 275 technical publications and wasone of the winners of the 2007 Publication Award of theSociety of Rheology. He is a Fellow of the American PhysicalSociety and President of the U.S. National Committee ofTheoretical and Applied Mechanics (USNC/TAM). He was therecipient of the 2013 Bingham Medal of the Society ofRheology and served as President of the Society from 2015 to2017. Most recently, he won the 2014 Gold Medal of the BritishSociety of Rheology.

TRACK PLENARY

xxxix

Track 9: Fluids9-17-2: FLUIDS ENGINEERING PLENARY II


Interface Actuations for Micro/Nano Fluidics(IMECE2018-90101)

Sung Kwon ChoUniversity of Pittsburgh

Abstract: Due to dominant interfacial tensions emerging inmicro/nano scale, controlling and actuating of interfaces are of critical importance in many micro/nano fluidic applications.On a quest to efficient interfacial actuations, Dr. Cho’s grouphas been studying and developing many mechanisms andmethods. In this talk, he will present two major topics oninterface actuations and their applications: (1) microswimmerpropelled by acoustically oscillating micro bubbles and (2) electrowetting and dielectrowetting for lab-on-a-chipapplications. Micro propulsion is a key element in the micro-swimmer that can be potentially applied to navigate insidehuman and animal bodies. Recently, we have developed amicro propulsion method where acoustically excited oscillatingbubbles generate streaming flows and propulsion forces. Avariety of propelling motions have been achieved by carefullydesigning/fabricating devices and controlling exciting conditions.For the second topic, he will present a variety of dropletmanipulations using dielectrowetting that highly localizes liquiddielectrophoresis to the three-phase contact line. In addition,he will also present how to mitigate bio-fouling (biomolecule adsorption), which is one of the critical hurdles against practicalapplications of droplet-based lab-on-a-chip systems. Detailedresults and discussions on the above topics will be presented.

Bio: Sung Kwon Cho earned B.S., M.S., andPh.D. from Mechanical Engineering at SeoulNational University in 1990, 1992 and 1998,respectively. After postdoctoral experience at the University of California, Los Angeles(UCLA), he joined the faculty of the

Department of Mechanical Engineering and Materials Scienceat the University of Pittsburgh in Fall 2003 as an AssistantProfessor and then was promoted to Associate Professor withtenure in 2009 and to Professor in 2018. Since Dr. Choestablished the “Microfluidic Systems Lab” in 2003, my primaryresearch focus is on “micro bubbles, micro drops, and microinterfaces as fluidic actuators,” with an emphasis on thedevelopment of a variety of micro/bio fluidic transducers andintegrated systems that enable us to efficiently handle a widerange of micro/bio substances. The nature of my research ishighly interdisciplinary, encompassing fluid mechanics,micro/nano manufacturing, interfacial science, electricalengineering, and bioengineering. In essence, my researchactivities heavily rely on micro/nano fabrication or MEMS(microelectromechanical system) technology, leveragingdevelopment and usage of the micro/nano facilities at theUniversity of Pittsburgh. Overall, Dr. Cho has published over 50 archival journal articles and book chapters in micro/biofluidics and MEMS areas mostly with financial supports from

federal grants (NSF, DARPA, NIH, DOD, DOE, HSARPA, andAHA) and the University of Pittsburgh.

Track 10: Heat Transfer10-64-1 HEATTRANSFER AND THERMAL

ENGINEERING PLENARY ITuesday, November 13, 8:00am–8:45am


Multiscale Modeling of Nanoparticle Transport:Applications to Targeted Drug(IMECE2018-90102)

Portnovo S. Ayyaswamy University of Pennsylvania

Abstract: This talk will describe methods based on equilibriumand non-equilibrium statistical mechanics to constructnumerical procedures that enable predictive models in cellbiology and bioengineering. The models described here haveparticular relevance to targeted drug delivery employing nano-sized carriers. The nano particle shape considered here iseither spherical or elliptical. Predictions from the simulations ofthe models are validated by comparison with experimental datawhere available.

Bio: Professor Portonovo S. Ayyaswamy isone of the most distinguished andinternationally recognized researcher andeducator today in the fields of Heat Transferand Thermal Science & Engineering. He isrecognized not only as an outstanding scholar

and educator but also as an immensely impactful contributor tomajor developments in industry. He has made many originaland seminal contributions to the science and art of heat andmass transfer, particularly in multi-phase flows, phase-changeheat and mass transfer, droplets and bubbles dynamics,ionized arc-plasma transport, bio heat and mass transfer, and nano-carrier thermal motion and transport. His very longlist of distinguished achievements in heat transfer research,education, and professional and industry service areacknowledged internationally. Dr. Ayyaswamy, Asa WhitneyProfessor of Dynamical Engineering, University ofPennsylvania, received his Ph.D. (1971) from UCLA, M.E.(1967), and M.S. (1965) from Columbia University, and B.E.(1962) from University of Mysore. He has co-authored thehighly regarded and extensively subscribed monograph:Transport Phenomena with Drops and Bubbles (Springer,1997). He has also contributed a significant chapter, entitled“Introduction to Biofluid Mechanics,” in the book, FluidMechanics, by P.K. Kundu and I.M. Cohen (Academic Press,MA, 2007). He has served as an expert on numerous NASA,NIH, NSF, NRC, and NAE. He is a Fellow of ASME andcurrently the Editor (2016–2021) of the ASME Journal of HeatTransfer. Dr. Ayyaswamy has been the recipient of the AIAAAerospace Professional of the Year award (1997), ASME HeatTransfer Memorial Award – Science (2001), ASME WorcesterReed Warner Medal (2007), 75th Anniversary Medal (2013) ofthe ASME Heat Transfer Division, and the ASME-AIChE MaxJakob Memorial Award (2015), among others. At the University

TRACK PLENARY

xl

TRACK PLENARY

xli

of Pennsylvania, he has received the Reid Warren Award andthe Lindback Award for Distinguished Teaching. In 2014, hewas celebrated with a Festschrift on his 70th birthday (P.Ayyaswamy’s 70th Birthday Tribute: Special Sessions on I –Interfacial Fluid Dynamics, and II – Devices and ModelingNanoparticles) at the 7th World Congress of Biomechanics,Boston, MA. He was also elected (2014) to the governing boardof the American Society for Gravitational and Space Research.

Track 10: Heat Transfer10-64-2 HEATTRANSFER ANDTHERMAL

ENGINEERING PLENARY IITuesday, November 13, 9:00am–9:45am


Aerospace Thermal Management: Challenges andOpportunities(IMECE2018-90103)

Andrew Bicos Office of Congressman Tom Reed (NY-23)

Abstract: This talk is focused on providing an overview ofthermal technology solutions for broader aerospaceapplications, which include hypersonic vehicle, commercialand military aircrafts, satellite and spacecraft systems, alongwith emerging areas of hybrid propulsion and more electricaircraft architecture. The anticipated thermal and power growthin aerospace systems in coming years is driving the need forever efficient, reliable, and affordable heat dissipation, storage,and waste heat to power conversion technology, capable ofmanaging thermal energy at the multi MW level. There is needfor an interdisciplinary and multifunctional research andproduct development approach to meet 21st century spaceand aviation challenges. Recent advances in materials andadvanced fabrication methods (including additivemanufacturing) have opened up significant designimprovement possibilities for development of “next generation”high performance, integrated thermal management solutions.Applications of this approach are illustrated by selectiveexamples, such as structurally integrated thermal managementfor hypersonic vehicle, air/liquid cooling, and thermal energystorage devices for pulsed power systems and use of novellightweight 3D printed materials in aircraft, satellite, andspacecraft systems. Finally, the need for synergeticcollaboration among academia, industry, and governmentresearch organizations is emphasized for rapid developmentof economically viable, next generation thermal technologiesfor aerospace applications.

Bio: Dr. Bicos is on leave from The BoeingCompany. His previous assignment was inBoeing Research & Technology, where he was director of the performance technologystrategy, where his responsibilities includeddeveloping the enterprise strategy for all

flight sciences R&D at Boeing and managing the portfolio of activities that develop and transition technologies andprocesses into Boeing’s wide array of products. He was alsothe chief engineer for the aeromechanics technology team,

where he ensured that the technologies transitioned to theproducts are technically sound and meet customerrequirements. Prior to this assignment, he was the director forenterprise manufacturing technology strategy and before thatfor the structures and materials technology strategy. Dr. Bicosjoined the company in 1987. His prior assignments includeproject leadership positions within the Boeing Satellite Systemsengineering design and analysis directorate, Delta rocketprogram mission assurance, and two years in supply chainmanagement. Prior to the Boeing and McDonnell Douglasmerger in 1997, he was senior manager responsible foradvanced structures R&D for the McDonnell Douglas PhantomWorks organization in which he specialized in composites andadaptive/multifunctional structures technology. Dr. Bicos haspublished more than 20 technical papers and articles oninnovative composites, adaptive structures, and vibrationreduction technologies. He has two patents, one for compositedamage detection and the other for a structural dampingdevice. He has received a B.S. in engineering and a MBA fromUCLA, as well as a M.S. and Ph.D. in aeronautics andastronautics from Stanford University. He has held positions onthe AIAA Structural Dynamics and ASME Adaptive Structuresand Material Systems technical committees and is a formerchairman of the ASME Aerospace Division. He is an AssociateFellow of the AIAA and the immediate past chair of the ASMEIndustry Advisory Board.

Track 11: Materials Genetics to Structures11-23-1 MATERIALS: GENETICS TO STRUCTURES

PLENARY ITuesday, November 13, 8:00am–8:45am

Room 307, David L. Lawrence ConventionCenter

Biological Materials and Mechanics: Challenges andOpportunities(IMECE2018-90108)

Marc A. Meyers UC San Diego

Abstract: Biological materials science is a new and vibrant fieldof materials science and engineering. Although biologists havebeen studying organisms for centuries, it is only recently thatmaterials scientists have started to use their fantasticexperimental, computational, and analytical arsenal of tools to reveal new features. This talk presents the Arzt eptahedron,which defines seven unique and defining characteristics ofbiological materials. The plethora of different structures andmechanical properties of biological materials is systematizedthrough a new paradigm: eight structural design elements,which are motifs appearing on different species and scales,and which enable analytical treatment and lead to enhanced understanding. We have applied this approach to approximatelytwenty different organisms. We illustrate our approach byapplying this knowledge to the toucan beak, rabbit and pigskin, fish scales, pangolin scales, and feathers. Current effortsat bioinspired materials and designs, including feathers, whalebaleen, seahorse tail, and gar scales, are also discussed.

Bio: Marc A. Meyers is DistinguishedProfessor of Materials Science at theUniversity of California, San Diego. Hisresearch field is the mechanical behavior ofmaterials, focused on dynamic behavior ofmaterials, nanocrystalline materials, and

biological materials. In the dynamic behavior of materials, the unifying theme is the high rate at which events occur. He initiated this work in 1972 and has dedicated 43 years to unifying it by emphasizing the physical and chemicalphenomena. This has been defined in his Dynamic Behavior of Materials (1994). His honors include Fellow, TMS, APS, and ASM, as well as awards in the U.S. (ASM Charles Barrett,Albert White, and Albert Sauveur Awards, TMS Mehl, MorrisCohen and Educator (Weertman) Awards, Acta MaterialiaMaterials and Society Award, SMD/TMS DistinguishedEngineer/Scientist and Service Awards, APS ShockCompression Science Award); Europe (Humboldt, DGM Heyn,and DYMAT Rinehart Awards); and China (Lee Hsung Award).He was co-founder of the Center for Explosives TechnologyResearch, New Mexico Tech, and of the EXPLOMETconference series (1980–2000). He is also the co-author ofMechanical Metallurgy, Mechanical Behavior of Materials, andBiological Materials Science, and approximately 400 papers.He is corresponding member of the Brazilian Academy ofSciences and of the Institut Grand Ducal (Luxembourg). In2014, he completed the kayak descent of the River of Doubt in honor of the 1914 Amazon expedition co-led by TheodoreRoosevelt and the Brazilian explorer Col. Rondon. He alsowrites fiction and is the author of Mayan Mars, ChechnyaJihad, D’amour et d’acier, and Yanomami.

Track 11: Materials Genetics to Structures11-23-2 MATERIALS: GENETICS TO STRUCTURES

PLENARY IITuesday, November 13, 9:00am–9:45am


The Future of Aerospace Materials: Challenges andOpportunities(IMECE2018-90109)

Richard A. Vaia Air Force Research Laboratory

Abstract: Over a hundred years ago, the pioneers of aviationtook flight in no small part due to material innovations rangingfrom novel casting of aluminum engine blocks to judiciousselection of natural materials. Unquestionably, the future ofaerospace will look as different from today as the Wright Flyerand Curtiss June Bug differ from UAVs and F35s. However, therole of materials will remain unchanged—they will be thecrucial ingredient that enables these future machines to pushthe performance envelope. Using examples from currentresearch within the Air Force Research Laboratory, the toolsnecessary to hasten the development of these vital materialswill be discussed. These range from embracing technologiesfrom the digital revolution to accelerate materials development,reduce qualification cost, and provide agile manufacturingmethods, to harvesting the potential at the intersection of

nano-based metamaterials, smart surfaces, nanostructureddevices, and biotechnology to enable autonomous systemsthat can execute complex tasks in evolving environments.

Bio: Richard A. Vaia is the Technical Directorof the Functional Materials Division at theU.S. Air Force Research Laboratory (AFRL).The 200+ scientists and engineers he leadsdeliver materials and processing solutions to revolutionize AF capabilities in Survivability,

Directed Energy, Reconnaissance, and Human Performance.Additionally, he has published more than 200 articles onnanomaterials, with honors including the AF McLucas Award for Basic Research, ACS Doolittle Award, Air ForceOutstanding Scientist, Air Force Office of Scientific ResearchStar Teams, and Fellow of the Materials Research Society,American Physical Society, American Chemical Society,NextFlex, and the Air Force Research Laboratory.

Track 12: Mechanics of Solids, Structures andFluids12-40-1 MECHANICS OF SOLIDS, STRUCTURES AND

FLUIDS PLENARY ITuesday, November 13, 8:00am–8:45am


The Isogeometric Approach to Analysis (IMECE2018-90104)

Thomas J.R. Hughes, JrUT Austin

Abstract: The vision of Isogeometric Analysis was firstpresented in a paper published October 1, 2005. Since then ithas become a focus of research within both the fields of finiteelement analysis (FEA) and computer aided design (CAD) andis rapidly becoming a mainstream analysis methodology and anew paradigm for geometric design. The key concept utilized in the technical approach is the development of a new foundation for FEA, based on rich geometric descriptions originating in CAD,resulting in a single geometric model that serves as a basis forboth design and analysis. In this overview, the talk will describesome areas in which progress has been made in developingimproved methodologies to efficiently solve problems that havebeen at the very least difficult, if not impossible, withintraditional FEA. It will also describe current areas of intenseactivity and areas where problems remain open, representingboth challenges and opportunities for future research.

Bio: Thomas J.R. Hughes holds a B.E. andM.E. in Mechanical Engineering from PrattInstitute and M.S. in Mathematics and Ph.D. in Engineering Science from the University ofCalifornia at Berkeley. He taught at Berkeley,Caltech, and Stanford before joining the

University of Texas at Austin. At Stanford, he served asChairman of the Division of Applied Mechanics, Chairman ofthe Department of Mechanical Engineering, and Chairman ofthe Division of Mechanics and Computation, and occupied theCrary Chair of Engineering. At Austin, he is Professor of

TRACK PLENARY

xlii

TRACK PLENARY

xliii

Aerospace Engineering and Engineering Mechanics and holdsthe Computational and Applied Mathematics Chair III. He is aFellow of the American Academy of Mechanics, ASME, AIAA,ASCE, AAAS; Founder, Fellow, and past President of USACMand IACM; past Chairman of the Applied Mechanics Division ofASME; past Chairman of the US National Committee onTheoretical and Applied Mechanics; and co-editor of theinternational journal Computer Methods in Applied Mechanicsand Engineering. Dr. Hughes is one of the most widely citedauthors in Engineering Science. He has received the HuberPrize and Von Karman Medal from ASCE; the Timoshenko,Worcester Reed Warner, and Melville Medals from ASME; theVon Neumann Medal from USACM; the Gauss-Newton Medalfrom IACM; and many other national and international awards.He is a member of the U.S. National Academy of Sciences; theU.S. National Academy of Engineering; the American Academyof Arts and Sciences; the Academy of Medicine, Engineeringand Science of Texas; and a Foreign Member of the RoyalSociety of London, the Austrian Academy of Sciences, and theIstituto Lombardo Accademia di Scienze e Lettere. Dr. Hughes has received honorary doctorates from the universities of Louvain,Pavia, Padua, Trondheim, Northwestern, and A Coruña.

Track 12: Mechanics of Solids, Structures andFluids12-40-2 MECHANICS OF SOLIDS, STRUCTURES AND

FLUIDS PLENARY IITuesday, November 13, 9:00am–9:45am


How to Design Quasibrittle and Lamellar BiomimeticStructures for Failure Probability <10-6: Gauss-Weibull andFishnet Statistics(IMECE2018-90105)

Zdenek P. Bazant Northwestern University

Abstract: Similar to nacre (or mother-of-pearl), imbricatedlamellar structures are widely found in natural and man-madematerials, and are of interest for biomimetics. These staggeredimbricated structures are known to be rather insensitive todefects and have strength and fracture toughness an order-of-magnitude higher than their constituents. Their deterministicbehavior has been intensely studied, while statistical studieshave been rare and no theoretical basis for the probabilitydensity function (pdf) of strength has yet been formulated. Thispaper presents a theoretical and numerical study of the pdf ofstrength and of the corresponding statistical size effect. Afterreasonable simplifications of the shear bonds, a lamellar axiallyloaded lamellar shell is statistically modelled as a fishnet pulleddiagonally. A FE model is developed and used in many millionsof Monte Carlo simulations of strength. An analytical model forfailure probability of the fishnet is developed and matched tothe computed statistical histograms of strength of fishnetstructures of various sizes. Based on fresh results atNorthwestern, post-peak progressive softening of fishnet linksis considered and its effect on the strength probabilitydistribution is analyzed on the basis of order statistics. It

appears that, with increasing size, the pdf of strength slowlytransits from Gaussian to Weilbull distribution but the transitionis different from that previously obtained at Northwestern forquasibrittle materials of random heterogeneous mesostructure.An important practical implication is that the staggered lamellararchitecture not only enhances the mean strength but alsocontributes an additional major strength increase at the failureprobability level of 10-6, which is what matters for structuralsafety.

Bio: Born and educated in Prague (Ph.D.1963), Zdenek P. Bazant joined Northwesternin 1969, where he has been W.P. MurphyProfessor since 1990 and, simultaneously,McCormick Institute Professor since 2002,and Director of Center for Geomaterials

(1981–1987). He was inducted to NAS, NAE, AmericanAcademy of Arts and Sciences, and Royal Society of London;to the academies of Italy, Austria, Spain, Czech Republic,Greece and Lombardy, and Academia Europaea. He is anhonorary Member of ASCE, ASME, ACI, and RILEM. Hereceived the Austrian Cross of Honor for Science and Art I.Class; seven honorary doctorates (Prague, Karlsruhe,Colorado, Milan, Lyon, Vienna, Ohio State); ASME Medal,ASME Timoshenko, Nadai and Warner Medals; ASCE vonKarman, Newmark, Biot, Mindlin and Croes Medals, andLifetime Achievement Award; SES Prager Medal; RILEML'Hermite Medal; Exner Medal (Austria); Torroja Medal (Madrid);Solin and Bazant, Sr. Medals (Prague); etc. He authored sixbooks: Scaling of Structural Strength, Inelastic Analysis,Fracture and Size Effect, Stability of Structures, Concrete atHigh Temperatures, and Concrete Creep. H-index: 115,citations: 58,000 (on Google, June 2017, incl. self-cit.), i10 index: 566. In 2015, ASCE established the ZP BazantMedal for Failure and Damage Prevention. He is one of theoriginal top 100 ISI Highly Cited Scientists in Engineering.(www.ISIhighlycited.com).

Track 13: Micro- and Nano-SystemsEngineering and Packaging13-2-1 MICRO- AND NANO-SYSTEMS ENGINEERING

AND PACKAGING PLENARY IWednesday, November 14, 9:00am–9:45am


The Role of Arrayed Sensor Systems-on-Chip in Next-Neneration MEMS Inertial Sensing(IMECE2018-90106)

Gary K. Fedder Carnegie Mellon University

Abstract: Two recent projects illustrate the continued push fortechnological innovation to improve inertial sensorperformance, generally measured by higher dynamic range,lower bias instability, and lower power. Bias drift compensationby observing on-chip “auxiliary” sensors is viable whenextrinsic factors, such as ambient temperature and packagingstress fluctuations, cause the drift. As one example, die stresscompensation, which augments temperature compensation,

resulted in a significant reduction in long-term drift in oursilicon-on-insulator mode-symmetric vibratory-rate gyroscope.In the second example, pushing the state-of-the-art in dynamicrange in a CMOS-MEMS high-g shock sensor presentschallenges met by maturation of a system-on-chip designcomprising an array of hundreds of individual accelerometercells and augmented by piezoFET die-level stress sensors.

Bio: Gary K. Fedder is the Howard M. WilkoffProfessor of Electrical and ComputerEngineering, Professor of The RoboticsInstitute, and Vice Provost for Research atCarnegie Mellon University. He previouslyserved in administrative roles at Carnegie

Mellon as Director of the Institute for Complex EngineeredSystems (2006–2014) and Associate Dean for Research in theCollege of Engineering (2013–2015). From 2011 to 2012, Dr.Fedder served as a technical co-lead in the U.S. AdvancedManufacturing Partnership where he worked with industry,academia, and government to generate recommendations that motivated the launch of the National Network forManufacturing Innovation, now called Manufacturing USA.He was founding president and later served as interim CEOof the Advanced Robotics for Manufacturing Institute in 2017.Dr. Fedder received his B.S. and M.S. in EECS from MIT in1982 and 1984, respectively, and his Ph.D. in EECS from theUniversity of California at Berkeley in 1994. He worked atHewlett-Packard as an R&D engineer from 1984 to 1989.His personal research lies in design and process integration of MEMS where he has contributed to over 280 researchpublications and holds 15 patents. He is an IEEE Fellow forcontributions to integrated MEMS. He served as subject editorfor the IEEE Journal of Microelectromechanical Systemsfrom 2002 to 2013 and currently serves on the executiveeditorial board for the IoP Journal of Micromechanics andMicroengineering, as a member of the editorial board for theIET Micro & Nano Letters, and as co-editor of the Wiley-VCHAdvanced Micro- and Nanosystems book series.

Track 13: Micro- and Nano-SystemsEngineering and Packaging13-2-2 MICRO- AND NANO-SYSTEMS ENGINEERING

AND PACKAGING PLENARY IIThursday, November 15, 8:00am–8:45am


2D Materials, Flexible Electrodes and Surfaces(IMECE2018-90107)

Eui-Hyeok YangStevens Institute of Technology, USA

Abstract: There has been a growing interest in two dimensional(2D) crystals beyond graphene, exhibiting novel properties and potential applications in next generation electronic andphotonic devices. Graphene has superior properties, includinghigh carrier mobility, ultrahigh surface area and excellentthermal conductivity. Whereas the lack of a band gap is acritical limitation for the use of graphene in electronic devices,monolayer semiconducting transition metal dichalcogenides

(TMDs) have shown highly promising prospects in electronicsand optoelectronics. Therefore, non-graphene 2D atomiclayers, such as hexagonal boron nitride (hBN) and TMDs, havebeen integrated into research scale devices, thereby probingmechanical, chemical, electrical and optoelectrical functions. I will present our investigation of chemical vapour deposition(CVD)-growth, achieving localized, patterned, single crystallineor polycrystalline monolayers of TMDs, including MoS2, WS2,WSe2 and MoSe2, as well as their heterostructures. Weparticularly focus on enabling the fabrication of epitaxiallygrown TMDs on other van der Waals materials towardssynthesizing TMDs with an ultralow-defect density. We performmicroscopic and macroscopic material characterization toprovide predictive strategies for TMD growth and in turn,illuminate the role of dissimilar 2D substrates in the preventionof interior defects in TMDs. We furthermore demonstrate thegrowth of TMD homobilayers with well-ordered stacking anglesby controlling edge structures of the underlying TMD layer.Other related projects include modelling to prevent theanomalies encountered in topographic images of TMDmonolayers in dynamic atomic force microscopy, andelucidating the effect of TMD surfaces and their geometricarrangements on cellular morphology and adhesion. We alsoinvestigate other nanomaterials, including vertically alignedcarbon nanotubes for stretchable supercapacitors. Building onthese results, our next step is to combine 2D materials withflexible substrates toward next generation wearable devices.Currently my group is collaborating with many top researchgroups in the US and around the world.

Biography: Eui-Hyeok Yang is a full professorin the Mechanical Engineering Department atStevens Institute of Technology. He receivedhis Ph.D. from Ajou University, Korea. After hispostdoctoral training at University of Tokyoand at California Institute of Technology, he

joined NASA’s Jet Propulsion Laboratory (JPL), where hebecame a Senior Member of the Engineering Staff. Inrecognition of his excellence in advancing the use of MEMS-based actuators for NASA’s space applications, he receivedthe prestigious Lew Allen Award for Excellence at JPL in 2003.He joined Stevens Institute of Technology as an AssociateProfessor in the Department of Mechanical Engineering in2006, established the Multi-User Micro Device Laboratory atStevens in 2008, and became a tenured full Professor inMechanical Engineering in 2014. Currently, his group’s researchcovers the growth and nanofabrication of graphene, carbonnanotubes and TMD heterostructures, as well as theimplementation of tunable wetting and surface interaction. Hehas received more than 35 major grants over the course of hiscareer from several federal agencies, including six NSF andthree AFOSR grants, and five NASA and three NRO contracts.Dr. Yang’s service to the professional community includesformal appointments, such as Editorial Board Member ofNature’s Scientific Reports, Associate Editor of IEEE SensorsJournal, and Editorial Board Member of the Elsevier journal,Nano-Structures & Nano-Objects. Dr. Yang has publishedhundreds of articles, books, and papers, as well as providedkeynotes, presentations, and seminars at various academicand industrial events.

TRACK PLENARY

xliv

Room 9:45am–11:30am PG. 1:45pm–3:30pm PG. 3:45pm–5:30pm PG.

301 1-1-1: Nonlinear Phononics 1 1-1-2: Micro and Nano Phononics 2 1-1-3: Design of Phononic Crystals 3and Metamaterials

302 1-2-1: General Noise and Vibration 1 1-3-1: Computational Acoustics 2 1-6-1: Flow-Induced Acoustics and 3Control Human Perception of Noise

303 5-1-1: Product and Process Design I 55 5-1-2: Product and Process Design II 57 5-1-3: Product and Process Design III 59

304 5-5-1: Product Optimization I 55 5-5-2: Product Optimization II 57 5-8-1: Reliability and Risk in Energy 59Systems

305 5-11-1: Failure and Forensic Analysis 55 5-12-1: Reliability Methods 58 5-13-1: Safety, Risk and Reliability of 60Emerging Technologies

306 8-5-1: Energy Systems Components 89 8-2-1: Energy and Exergy Analysis of 91 8-5-2: Energy Systems Components – 94– 1 Power Cycles 2

307 6-4-1: Robot Control I 65 6-4-2: Robot Control II 68 6-4-3: Robot Design I 70

308 6-4-7: Compliant Mechanisms 65 6-2-1: Dynamics, Vibration, and 67 6-2-2: Dynamics, Vibration, and 69Control – I Control – II

309 6-13-1: Control Theory and 66 6-8-1: Mechanics of Smart Structures 68 6-8-2: Energy Harvesting and 70Applications I Transducers

310 6-17-1: Multi-Physics Dynamics- 67 6-9-1: Novel Control of Dynamic 68 6-9-2: Novel Control of Dynamic 71Control & Diagnostics-Prognostics of System I System IIStructures I

311 6-15-1: Measurement and Analysis 66 6-19-1: Renewable Energy, Structural 69 6-11-2: Vibrations of Continuous 71Techniques in Nonlinear Dynamics I Health Monitoring, and Distributed Systems II

Structural Systems I

315 6-12-1: Mobile Service Robots and 65 6-12-2: Mobile Service Robots and 69 8-2-2: Thermodynamics of Cooling 94Unmanned Vehicles I Unmanned Vehicles II and Thermal Processe

316 8-15-1: CMS-Biofuel Systems and 90 8-16-1: CMS-Biofuels Production, 93 8-1-1: Energy-Related Multidisciplinary 93Processes Conversion, and Simulation – 1

317 8-4-1: Advanced Power Cycles 89 8-4-2: Improvement in Performance 91 8-4-3: Solar/Waste-Heat Power 94and Emissions of Energy Systems Generation

318 8-11-1: Lithium Ion Batteries – Design 90 8-11-2: Modeling Efforts in Batteries 92 8-11-3: Structural Analysis of Li-Ion 95and Performance Batteries

319 8-6-1: Low-Temperature Energy 89 8-10-1: Advanced Technologies for 92 8-10-2: Advanced Technologies for 95Conversion Systems Wind Energy Solar Energy

323 10-3-1: K6-2 Numerical Analysis and 123 10-4-1: System Analysis 126 10-32-1: CMS - Combustion Power 129Performance Assessment of Energy SystemSystems

324 10-60-1: Prof. Frank Kreith Memorial 125 10-60-2: Prof. Frank Kreith Memorial 128 10-60-3: Prof. Frank Kreith Memorial 130Symposium: Advances in Heat Symposium: Advances in Heat Symposium: Advances in Heat Transfer, Energy Systems & Transfer, Energy Systems & Transfer, Energy Systems &Sustainability – I Sustainability – II Sustainability – III

325 10-21-1: K9-1 Thermal Transport 123 10-21-2: K9-1 Thermal Transport 126 10-6-1: Batteries 128Across Hard/Soft Interfaces – I Across Hard/Soft Interfaces – II

326 10-59-1: Heat and Mass Transport 124 10-20-1: Panel on Fundamentals of 126 10-22-1: K9-2 Coupled Thermal 129Photogallery Non-Equilibrium Transport Transport by Electrons, Magnons, and

Phonons

327 10-4-2: Component/Material Design 123 10-40-1: K15-1 Transport Phenomena 127 10-8-1: Heat Transfer in Passive 129and Analysis in Manufacturing and Materials Thermal Control Systems

Processing – I

321 11-2-1: Nanomaterials for Energy I 157 11-2-2: Nanomaterials for Energy II 159 11-15-1: Multifunctional Nanomaterials 1611

320 11-7-1: Fracture and Damage: 157 11-7-2: Fracture and Damage: 159 11-9-1: Materials Processing and 161Nano- to Macro-Scale I Nano- to Macro-Scale II Characterization I

330 11-8-1: Material Processing of Flexible 158 11-8-2: Material Processing of Flexible 159 11-8-3: Material Processing of Flexible 161Electronics, Sensors, and Devices I Electronics, Sensors, and Devices II Electronics, Sensors, and Devices III

xlvi

Technical Program At-A-Glance

EXHIBIT HALL POSTER SESSIONS

Undergraduate Research and Design Expo Student Poster Competition Sunday, November 11 5:30pm–7:00pm

NSF Student Competition Wednesday, November 14 11:45am–2:30pm

Virtual Podium Wednesday, November 14 11:45am–2:30pm

MONDAY, NOVEMBER 12

Room 9:45am–11:30am PG. 1:45pm–3:30pm PG. 3:45pm–5:30pm PG.

331 12-15-1: Inaugural Symposium on 174 12-33-1: Congress-Wide Symposium 178 12-35-1: Congress-Wide Symposium 182the Constitutive Modeling of the on NDE & SHM – Nondestructive on NDE & SHM – Active and PassiveMechanical Behavior and Performance Characterization of Solids, Structures Health Monitoring of Structuresof Electronic, Photonic, MEMS, and and FluidsNEMS Materials, Assemblies, Packages, Modules, and Systems

333 12-1-1: Mechanics of Soft Materials: 173 12-1-2: Mechanics of Soft Materials: 176 12-1-3: Mechanics of Soft Materials: 179Structure Gels/Active Materials 1 Gels/Active Materials 2

334 12-28-1: Instabilities in Solids and 175 12-28-2: Instabilities in Solids and 177 12-28-3: Instabilties in Solids and 181Structures: Mechanics of Slender Structures: Numerical/Analytical Structures: Active and Soft MaterialsSolids Stability

335 12-10-1: Modeling and Experiments in 173 12-10-2: Modeling and Experiments in 176 12-10-3: Modeling and Experiments in 179Nanomechanics and Nanomaterials 1 Nanomechanics and Nanomaterials 2 Nanomechanics and Nanomaterials 3

336 12-18-1: Computational Modeling of 174 12-18-2: Computational Modeling of 177 12-13-1: Recent Advances and 180Extreme Events Extreme Events Applications in Meshfree and Particle

Methods

338 12-19-1: Computational Fluid- 175 12-19-2: Computational Fluid- 177 12-19-3: Computational Fluid- 180Structure Interaction Structure Interaction Structure Interaction

401 12-22-1: Deformation and Failure of 175 12-38-1: Young Medalist Symposium 179 12-38-2: Young Medalist Symposium 182Multifunctional Materials

402 12-6-1: In-Situ Techniques in 173 12-36-1: Keynote Lectures on 178 12-36-2: Keynote Lectures on 182Experimental Mechanics Computational Mechanics – 1 Computational Mechanics – 2

403 1-8-1: Vibration and Acoustic 1 1-8-2: Vibration and Acoustic 3 1-8-3: Vibration and Acoustic 4Measurements, Signal Processing, Measurements, Signal Processing, Measurements, Signal Processing,and Test Facilities I and Test Facilities II and Test Facilities III

404 10-51-1: Thermal Management of 124 10-54-1: Methods in Computational 127 10-42-1: K16-1: Heat Transfer in 130Electronic Equipment Heat Transfer Electronic Equipment – I

405 5-17-1: Structural Systems 56 5-17-2: Full Vehicle Crashworthiness 58 12-22-2: Deformation and Failure of 181Crashworthiness and Occupants Protection Multifunctional Materials

406 5-14-1: Testing for Product Reliability 56 5-16-1: Safety in Transportation, 58 5-16-2: Safety in Transportation, 60and Safety Agriculture, and Off-Road Vehicles Agriculture, and Off-Road Vehicles

407 11-11-1: Modeling, Simulation and 158 11-11-2: Modeling, Simulation and 160 11-4-1: Materials and 3D Printing for 160Design of Multifunctional Materials 1 Design of Multifunctional Materials 2 Biology and Medicine

Room 8:00am–9:45am PG. 10:00am–11:45am PG. 1:45pm–3:30pm PG. 3:45pm–5:30pm PG.

301 9-17-1: Fluids Engineering 109 1-12-1: NDE & SHM: 6 1-1-5: Topological 6 1-1-7: Control of 7Plenary I Ultrasonic Waves for Phononics II Phononic Crystals and9-17-2: Fluids Engineering 109 Material Characterization MetamaterialsPlenary II and Damage Assessment

302 8-17-1: Energy Plenary 96 1-1-4: Topological 5 1-1-6: Theory, 6 5-18-1: General 64Phononics I Computation, and

Experiments in Phononics

303 6-1-1: Dynamics, Vibration, 72 5-1-4: Product and 61 5-2-1: Social Context 62 5-18-2: General 64and Control Plenary Process Design IV Aware Design

304 5-19-1: Design, Reliability, 61 5-4-1: CAD, CAM and 61 5-4-2: CAD, CAM and 63 11-8-5: Material Processing 166Safety, and Risk Plenary CAE Design I CAE Design II of Flexible Electronics,

Sensors, and Devices V

305 1-13-1: Acoustics, 5 5-10-1: Topics on Safety 62 5-10-2: Topics on Risk 63 6-20-1: Dynamics, 79Vibration,and and Hazard Analysis and Hazard Analysis Vibration, and Control for Phononics Plenary Structural Health

Monitoring Applications I

306 10-64-1: Heat Transfer and 131 6-10-1: Multibody Dynamic 74 6-10-2: Multibody 76 6-10-3: Multibody 78Thermal Engineering Systems and Dynamic Systems and Dynamic Systems and Plenary I Applications I Applications II Applications III10-64-2: Heat Transfer and 131Thermal Engineering Plenary II

307 11-23-1: Materials: Genetics 162 6-4-4: Robot Design II 72 6-4-5: Mechanism 74 6-4-6: Mechanism 77to Structures Plenary I Design I Design II11-23-2: Materials: Genetics 162to Structures Plenary II

xlvii


MONDAY, NOVEMBER 12



308 12-40-1: Mechanics of 183 6-6-1: Vibration, Noise 73 6-6-2: Vibration, Noise 75 6-6-3: Vibration, Noise 77Solids, Structures and Control and Damping Control and Damping Control and DampingFluids Plenary I Technologies I Technologies II Technologies III12-40-2: Mechanics of 183Solids, Structures and Fluids Plenary II

309 6-7-1: Dynamics and 73 6-3-1: Nonlinear Dynamics, 74 6-3-2: Nonlinear Dynamics, 76Control in Micro/Nano Control, and Stochastic Control, and StochasticEngineering I Mechanics I Mechanics II

310 6-5-1: Fluid-Structure 72 6-5-2: Fluid-Structure 75 6-11-1: Vibrations of 78Interaction I Interaction II Continuous Systems I

311 8-2-3: Chemical 96 8-2-4: On Entropy and 98 8-8-1: Environmental 101Thermodynamic Processes Irreversibilities’ Minimization Aspects of Energy Systems

315 8-1-2: Energy-Related 96 8-14-1: Nuclear Power 99 8-7-1: Thermal Energy 101Multidisciplinary – 2 Plants: Design, Analysis, Storage – Devices I

and Safety

316 8-4-4: Engines Behaviour 97 8-4-5: Design and Analysis 98 8-4-6: Design and Analysis 100and Fuel Characteristics of Energy Systems – 1 of Energy Systems – 2

317 8-11-4: Thermal Aspects 97 8-11-5: Beyond Li-Ion 99 8-3-1: Thermoeconomics 100of Li-Ion Batteries Batteries

318 8-10-3: Advanced 97 8-10-4: Advanced 99 8-10-5: Advanced 102Technologies for Ocean Technologies for Wind Technologies for Solar Energy Energy II Energy II

319 9-3-1: Fluid Mechanics 109 9-3-2: Fluid Mechanics 111 9-3-3: Fluid Mechanics 112and Rheology of Nonlinear and Rheology of Nonlinear and Rheology of NonlinearMaterials and Complex Materials and Complex Materials and ComplexFluids – I Fluids – II Fluids – III

320 10-15-1: Fundamentals of 132 10-15-2: K8-1 134 10-15-3: K8-1 137Boiling and Evaporation Fundamentals of Boiling Fundamentals of Boiling,

Evaporation, and Condensation

321 10-7-1: Analysis of 131 10-7-2: Radiative 134 10-10-1: K6-9 Two Phase 137Radiative Transfer in Properties Transport in Energy Energy Systems Systems and Non-

Equilibrium and Dynamic Energy Systems

323 9-5-1: CFD Applications 109 9-5-2: CFD Applications 111 9-5-3: CFD Applications 113for Flow Optimization and for Flow Optimization for Flow OptimizationControl – I and Control – II and Control – III

324 9-9-1: Mathematical 110 9-9-2: Droplet 112 9-9-3: Fundamentals and 113Modeling in Microfluidics Microfluidics Applications of

Microfluidics

325 9-18-1: Young Engineers 110 9-11-1: Computational 112 9-11-2: Experimental 114Paper (YEP) Contest Modeling of Multiphase Characterization of

Flows Complex Multiphase Flows

326 10-33-1: CMS – Sprays 133 10-34-1: CMS – Applied 135 10-34-2: CMS – Applied 138and Emissions Combustion: Modeling Combustion: Improving

Heat Transfer and System PerformanceCombustion

327 10-42-2: K16-1: Heat 133 10-53-1: Applications of 136 10-53-2: Applications of 139Transfer in Electronic Computational Heat Computational HeatEquipment – II Transfer: Convection Transfer: Industrial

Applications

330 10-23-1: K9-3 Phononic 132 10-23-2: K9-3 Phononic 135 10-25-1: K9-5 Micro-/ 138Crystals and Crystals and Nanoscale Phase ChangeThermoelectrics – I Thermoelectrics – II Heat Transfer – I

331 11-9-2: Materials 163 11-9-3: Materials 164 11-9-4: Materials 166Processing and Processing and Processing and Characterization II Characterization III Characterization IV

333 11-8-4: Material 162 11-10-1: Bioinspired 164 11-10-2: Bioinspired 166Processing of Flexible Composites and Materials, Structures andElectronics, Sensors, and Structures ApplicationsDevices IV

334 11-12-1: Mechanics in 163 11-12-2: Mechanics in 165 11-14-1: Multifunctional 167Manufacturing of Manufacturing of Composite Materials Multifunctional Materials Multifunctional Materials and Structures 1and Structures I and Structures II

xlviii




335 12-10-4: Modeling and 184 12-17-1:Failure and 187 12-17-2:Failure and 190Experiments in Fracture of Additively Fracture of AdditivelyNanomechanics and Manufactured Materials Manufactured MaterialsNanomaterials 4 and Structures – 1 and Structures – 2

336 12-1-4: Mechanics of 183 12-1-5: Mechanics of 186 12-1-6: Mechanics of 188Soft Materials: Constitutive Soft Materials: Soft Materials: Electro/Modeling Bioinspiration and Magneto/Chemo-

Biomimetics Mechanics

338 12-28-4: Instabilities in 185 12-28-5: Instabilities in 187 12-13-2: Recent Advances 190Solids and Structures: Solids and Structures: and Applications in Stability of Composites, Phase Transformations/ Meshfree and ParticleFoams/Open-Cell Materials Transitions and Multi- Methods

stability

401 12-8-1: Multi-Scale 183 12-8-2: Multi-Scale 186 12-8-3: Multi-Scale 189Computations in Fluids, Computations in Fluids, Computations in Fluids,Structures, and Materials 1 Structures, and Materials 2 Structures, and Materials 3

402 12-19-4: Computational 184 12-31-1: Design of 187 12-31-2: Functionality of 191Fluid-Structure Interaction Mechanical Metamaterials Mechanical Metamaterials

403 12-39-1: Drucker Medal 185 12-39-2: Drucker Medal 188 12-39-3: Drucker Medal 191Symposium Symposium Symposium

404 12-12-1: Mechanics of 184 12-12-2: Mechanics of 186 12-12-3: Mechanics of 189Thin-Film and Multi-Layer Thin-Film and Multi-Layer Thin-Film and Multi-LayerStructures Structures Structures

405 1-4-1: Structural-Acoustic 5 1-11-1: NDE & SHM: 7 10-39-1: Gas Turbine 139System Identification Acoustic and Vibration Heat Transfer and Cooling

Methods in Structural Health Monitoring andNondestructive Testing

406 10-36-1: K13-1 Heat 133 10-36-2: K13-1 Heat 136 10-40-2: K15-1 Transport 139Transfer in Multiphase Transfer in Multiphase Phenomena in Systems – I Systems – II Manufacturing and

Materials Processing – II

407 10-6-2: Capacitors 137 11-14-4: Multifunctional 164 11-15-2: Multifunctional 165Composite Materials and Nanomaterials 2Structures 4


301 13-2-1: Micro- and Nano- 213 2-2-1: Congress-Wide 9 2-2-2: Congress-Wide 12 2-2-3: Congress-Wide 14Systems Engineering and Symposium on Additive Symposium on Additive Symposium on AdditivePackaging Plenary I Manufacturing: Metals- Manufacturing: Metals- Manufacturing: Metals –

Directed Energy Directed Energy Powder Bed Fusion IDeposition I Deposition II

302 7-13-1: Engineering 81 2-13-1: Congress-Wide 10 2-13-2: Manipulators and 13 2-13-3: Algorithms and 15Education Plenary Symposium on Additive Interfaces Optimization

Manufacturing: Robotic Additive Manufacturing

303 4-1-1: Biomedical and 39 2-15-1: Digital 11 2-15-2: Digital 13 2-15-3: Digital 16Biotechnology Plenary I Manufacturing in Cyber- Manufacturing in Digital Manufacturing in Industry

Manufacturing Aspects Twin Aspects 4.0 Aspects

304 3-20-1: Advances in 29 2-5-1: Mechanics and 9 2-5-2: Sensors and 12 2-5-3: Synthesis and 14Aerospace Technology Physics of 2D Materials Electronics of 2D Materials Processing of 2D MaterialsPlenary I

305 2-1-1: Advanced 9 2-6-1: Advanced Surface 10 2-6-2: Conventional 12 2-14-2: Laser-Matter 15Manufacturing Plenary Modification Using Machining Interaction and Its

Machining Applications in Materials Processing

306 2-14-1: Surface 11 3-12-1: Peridynamics 30 3-7-1: Dynamic Behavior 32Modification Based on Modeling – 1 of CompositesLaser Peening and Ablation

xlix


TUESDAY, NOVEMBER 7



307 3-18-1: Congress-Wide 29 3-19-1: Congress-Wide 31 3-2-1: Advances in 31Symposium on NDE & Symposium on NDE & SHM: AerodynamicsSHM: Structural Health Nondestructive EvaluationMonitoring of Aerospace and Structural Health Vehicles Monitoring of Composite

Materials and Structures

308 3-1-1: General Aerospace 29 3-4-1: Advances in 30 4-4-1: Tissue 42Aerospace Structures and CharacterisationsMaterials – 1

309 4-2-4: Damage 39 4-3-1: Vibration 40 4-3-2: Vibration 42Biomechanics IV: Characteristics and Applications to TherapyCavitation as a Mechanism Characterisations and Rehabilitationfor Brain Injury

310 4-8-1: Dynamics and 39 4-8-2: Dynamics and 41 4-8-3: Dynamics and 43Control of Biomechanical Control of Biomechanical Control of BiomechanicalSystems I Systems II Systems III

311 4-10-1: Biomedical 40 4-10-2: Biomedical 41 4-10-3: Biomedical 43Modeling I Modeling II Modeling III

315 4-11-1: Sports Related 40 4-11-2: Musculoskeletal 42 4-11-3: Musculoskeletal 44Brain Injury and Modeling Biomechanics and Sport Biomechanics

316 7-5-1: Applied Mechanics, 82 7-5-2: Applied Mechanics, 83 7-12-1: Engineering 85Dynamic Systems and Dynamic Systems and Research InnovationControl Engineering – I Control Engineering – II

317 7-2-1: Globalization of 81 7-1-1: Curriculum 82 7-1-2: Curriculum 84Engineering Innovations, Pedagogy Innovations, Pedagogy

and Learning and Learning Methodologies – I Methodologies – II

318 7-4-1: Systems Engineering 81 7-4-2: Systems Engineering 83 7-9-1: K-12 STEM, RET- 84and Sustainable and Sustainable University, School and Engineering Education – I Engineering Education – II Industry Alliance, Session

in Honor of Late Professor Devdas Pai

319 8-9-1: Cooling Technologies 103 8-9-2: Building Energy 104 8-9-3: Building Structure/ 106Generation Materials for Load

Reduction

320 10-25-2: K9-5 Micro-/ 141 10-26-1: Measurement of 143 10-26-2: Theoretical 144Nanoscale Phase Change Near-Field Thermal Prediction of ThermalHeat Transfer – II Radiation Emission and Energy

Conversion

321 9-13-1: Industrial Flows – I 115 9-13-2: Industrial Flows – II 116 9-13-3: Industrial Flows – III 118

323 8-7-2: Thermal Energy 102 8-7-3: Thermal Energy 104 8-7-4: Thermal Energy 106Storage – Materials Storage – Devices II Storage – Systems

Integration

324 8-12-1: PEM Fuel Cells – I 104 8-12-2: PEM Fuel Cells – II 105 8-12-3: Fuel Cell Systems 107and Infrastructure

325 8-10-6: Energy Storage, 103 8-10-7: Biomass, 105 8-10-8: Feasibility and 106Energy Harvesting, and Geothermal, and Small Techno-Economic Analysis Electric Cars Scale Generation of Renewable Energy

Technologies

326 9-5-4: CFD Applications 115 9-8-1: Kirti Ghia 116 9-8-2: Kirti Ghia 117for Flow Optimization and Celebration of Life – I Celebration of Life – IIControl – IV

327 9-11-3: Simulation of 115 9-11-4: Modeling of Slug 116 9-6-1: Computational or 117Multiphase Flows in Pumps Flows, Separators and Experimental Fluid and Complex Systems Shocks Dynamics? – A Dilemma

for Industries

330 10-36-3: K13-1 Heat 141 10-21-3: K9-1 Thermal 143 10-11-1: K6-10 Panel on 144Transfer in Multiphase Transport Across Hard/ the Key Role of Heat Systems – III Soft Interfaces – III Transfer Analysis and

Methodology in Research

331 10-16-1: K8-2 140 10-17-1: Fundamentals of 142 10-18-1: K8-4 144Fundamentals of Single Multi-Scale Modeling Fundamentals of Liquid/Phase Convection Solid Phase Change (Icing/

Deicing, Solidification)

333 10-44-1: Thermal Transport 142 10-29-7: Micro-/ 143 10-44-2: Thermal 145Under Microscale and Nanoelectronics and Transport UnderstandingRotating Features Related Issues and Its Applications

l




334 11-9-5: Materials 168 11-9-6: Materials 169 11-13-1: Multiphysics and 171Processing and Processing and Multiscale Modeling of Characterization V Characterization VI Lithium-Ion Batteries

335 11-14-2: Multifunctional 168 11-14-3: Multifunctional 169 11-20-1: Recent 171Composite Materials and Composite Materials and Developments in TribologyStructures 2 Structures 3

336 11-18-1: Phase 168 11-18-2: Phase 170 11-6-1: Nanoengineered, 170Transformations in Transformations in Hierarchical, Multi-ScaleMaterials Processing I: Materials Processing II: Materials and StructuresAdditive Manufacturing Microstructures and

Properties

338 12-1-7: Mechanics of Soft 192 12-1-8: Mechanics of Soft 194 12-26-1: Mechanics of 198Materials: Characterization Materials: Fracture, Soft Materials and Soft

Dissipation, and Self- RobotsHealing

401 12-31-3: Mechanics of 194 12-31-4: Reconfigurable 196 12-5-1: Quantitative 197Mechanical Metamaterials Mechanical Metamaterials Visualization Related to

Fracture & Crack Growth Processes

402 12-4-1: Mechanics of 192 12-4-2: Mechanics of 195 12-4-3: Mechanics of 197Adhesion and Friction Adhesion and Friction Adhesion and Friction

403 12-7-1: Multiscale Models 193 12-7-2: Multiscale Models 195 12-7-3: Multiscale Models 198and Experimental and Experimental and Experimental Techniques for Composite Techniques for Composite Techniques for CompositeMaterials and Structures Materials and Structures Materials and Structures

404 12-12-4: Mechanics of 193 12-29-1: Peridynamic 196 12-29-2: Peridynamics for 199Thin-Film and Multi-Layer Modelling and Analysis Composites, Fracture, andStructures Corrosion Damage

405 12-21-1: Fatigue Modeling 194 12-21-2: Fracture Modeling 196 12-21-3: Material Model 198in Engineering Materials in Engineering Materials and Fracture Theory

Development

406 13-3-1: Design and 213 13-3-2: Design and 213 13-4-1: Computational 214Fabrication, Analysis, Fabrication, Analysis, Studies on MEMS andProcesses, and Technology Processes, and Technology Nanostructures Ifor Micro and Nano for Micro and Nano Devices and Systems I Devices and Systems II

Room 8:00am–8:45am PG. 8:55am–10:40am PG. 10:50am–12:35pm PG. 2:05pm–3:50pm PG. 4:00pm–5:45pm PG.

301 2-2-4: Congress- 16 2-2-5: Congress- 19 2-2-6: Congress- 22 2-2-7: Congress- 25Wide Symposium Wide Symposium Wide Symposium Wide Symposiumon Additive on Additive on Additive on Additive Manufacturing: Manufacturing: Manufacturing: Manufacturing: Metals – Powder Polymers I Polymers II Composites/Bed Fusion II Ceramics & Bio-

Applications

302 2-8-1: Novel 17 2-8-2: Formability 20 2-8-3: Formability 23 2-8-4: Testing and 26Processes – I – II Defects

303 13-2-2: Micro- and 214 2-11-1: Advanced 18 2-11-2: Advanced 21 2-11-3: Advanced 23 2-11-4: Advanced 27Nano-Systems Manufacturing Manufacturing Manufacturing ManufacturingEngineering and Processes- Processes- Processes- Processes-Packaging Plenary II Modeling and Modeling and Modeling and Modeling and

Simulation I Simulation II Simulation III Simulation V

304 4-1-2: Biomedical 45 2-4-1: 16 2-4-2: 19 2-4-3: 22 2-7-1: Bonded 26and Biotechnology Nanomanufacturing: Nanomanufacturing: Nanomanufacturing: Joint and BoltedPlenary II Spray or Print Nanomaterials Integration of Joint Technologies

Deposition Synthesis and NanoscaleTechniques for Assembly Materials or Nanomaterials and Textures for Nanostructures Enhanced

Performance

305 3-20-2: Advances in 32 2-6-3: Assisted 17 2-6-4: Nontraditional 20 2-6-5: Machinability 22 2-6-6: Cutting Tool 25Aerospace Machining Machnining of Engineering Performance and Technology Plenary II Techniques Processes Materials Treatment

li





306 3-6-1: Lightweight 32 3-6-2: Lightweight 34 3-4-2: Advances in 35 3-17-1: Nonlinear 37Sandwich Sandwich Aerospace Problems in Composites and Composites and Structures and AerospaceLayered Structures Layered Structures Materials – 2 Structures– 1 (in Honor of – 2 (in Honor ofProf. Frostig) Prof. Frostig)

307 3-8-1: Dynamics 33 3-12-2: 35 3-10-1: Impact, 36 3-12-3: 36and Control of Peridynamics Damage and PeridynamicsAerospace Modeling – 2 Fracture of Modeling – 3Structures Composite

Structures

308 4-4-2: Biomedical 45 4-2-3: Damage 47 4-2-2: Damage 49 4-2-1: Damage 51Imaging and Biomechanics III: Biomechanics II: Biomechanics I: Characterisation Materials Ballistic Impact Blunt Impact

Characterization, and Blast Effects Effects and Modeling and and Analysis AnalysisAnalysis

309 4-5-1: Biomaterials 45 4-5-2: Biomaterials 48 4-5-3: Biomaterials 50 4-5-4: Biomaterials 52and Tissue I: and Tissue II: and Tissue III: and Tissue IV: Fabrication Modelling Sythesis and Sythesis and

Characterization Characteriazation

310 4-7-1: Detection 46 4-7-2: Surgical 48 4-7-3: Fluid and 50 4-7-4: 53and Monitoring Assistive Devices Microfluid Rehabilitation and Biomedical Devices Biomedical Devices Treatment Devices

311 4-10-4: Biomedical 46 4-10-5: Biomedical 49 4-9-1: Clinical 51 4-9-2: Clinical 53Modeling IV Modeling V Applications of Applications of

Bioengineering I – Bioengineering IIExperimental Methods

315 4-14-1: Biotransport 47 4-14-2: Heat 49 7-7-1: Problem 87 7-7-2: Problem 88Transfer and Fluid Solving in Solving in

Engineering EngineeringEducation, Reseach Education, Reseachand Practice – I and Practice – II

316 7-10-1: Teaching 86 7-3-1: Engineering 86 7-3-2: Engineering 87 7-6-1: Fluid 87Laboratories, Accreditation, Accreditation, Mechanics, Machine Shop Data Collection, Data Collection, Heat Transfer, Experiences and Assessment and Assessment and Experiments andTechnology-Aided ABET Session I ABET Session II Energy SystemsLearning

317 7-8-1: Distance/ 85 7-8-2: Distance/ 86 9-2-1: Electric, 120 4-6-1: 52Online Engineering, Online Engineering, Magnetic & MechanobiologyModels and Models and Thermal Enabling Enabling PhenomenaTechnologies – I Technologies – II

318 9-12-1: Multiphase 118 9-4-1: 119 9-4-2: 121 9-4-3: Fundamental 122Flow with Fundamentals and Computational Fluids EngineeringBio-applications Basic Research Methods in Fluid and Applications

Mechanics

319 9-14-1: Symposium 118 9-16-1: Fluid 120 9-16-2: Fluid 121on Wind Turbines Measurements and Measurements andAerodynamics and Instrumentation – I Instrumentation – IIControl

320 12-26-2: Mechanics 201 12-26-3: Mechanics 204 12-26-4: Mechanics 207 12-26-5: Mechanics 210of Soft Materials of Soft Materials of Soft Materials of Soft Materialsand Soft Robots and Soft Robots and Soft Robots and Soft Robots

321 10-63-2: Multi- 148 12-41-1: Dynamic 205 12-41-2: Dynamic 209 12-32-1: High- 212Phase and Passive Failure of Failure of PerformanceEnhanced Heat Materials and Materials and NanostructuralTransfer Structures Structures Materials and

Nanocomposites

323 9-15-1: 18th 119 10-29-3: Transport 149 10-61-1: K8-7 152 10-61-2: K8-7 154International at Interfaces Fundamentals of Fundamentals ofSymposium on Boiling and Condensation, Measurement and Condensation – II-B Transient Boiling,Modeling of and Environmental Flows Dehumidification

lii




324 10-26-3: Radiative 147 10-27-1: Thermal 149 10-29-1: Heat 151 10-28-1: K9-8 153Properties and Metrology for Conduction in 2D Advances in Radiative Transfer Nanoscale Heat Materials/Devices Simulation Methodsin the Far Field Transfer

325 10-29-2: Heat 147 10-50-1: Heat 152 10-1-1: Analysis of 153Transfer Devices Transfer in HVAC Thermal Systemsand Engineering Systems and Air

Quality and Comfortin Confined Spaces

326 10-13-1: 146 10-14-1: 149 10-14-2: 151Measurements of Calculations of Calculations ofThermophysical Thermophysical ThermophysicalProperties Properties 1 Properties 2

327 10-47-1: Heat 148 10-62-1: Single- 153 10-63-1: Multi- 155Transfer and Phase Enhanced Phase and PassiveHeat Exchange Heat Transfer - Enhanced Heat

Applications Transfer

330 12-3-1: Mechanical 200 12-3-2: Mechanical 202 12-3-3: Mechanical 205Characterization Characterization Characterization in Extreme in Extreme in ExtremeEnvironments I Environments II Environments III

331 12-14-1: Plastic 200 12-14-2: Multi- 203 12-14-3: Numerical 206 12-27-4: 211Anisotropy Scale Modelling of Modeling With Multifunctional andModeling Plastic Anisotropy Applications to Micro-/Nano-

Forming structured Materials:Modeling and Characterization (IV)

333 12-2-1: 3D Printing 200 12-2-2: Mechanics 202 12-16-1: Multiscale 206 12-16-2: Multiscale 209of Novel Materials of 3D Printed Modeling and Modeling and

Materials Experimentation Experimentation of Geomaterials of Geomaterials

334 12-20-1: Multiscale 206 12-20-2: Multiscale 210Mechanics of Mechanics ofDuctile Failure Ductile Failure

335 12-25-1: Mechanics 201 12-25-2: Mechanics 204 12-30-1: 208 12-30-2: 211and Design of and Design of Symposium on Symposium onCellular Materials Cellular Materials Multiphyics Multiphyics

Simulations and Simulations and Experiments for Experiments for Solids Solids

336 12-27-1: 202 12-27-2: 204 12-27-3: 208 13-8-2: 217Multifunctional Multifunctional Multifunctional Microfluidics inand Micro-/Nano- and Micro-/Nano- and Micro-/Nano- Bioengineeringstructured Materials: Structured Materials: structured Materials: ApplicationsModeling and Modeling and Modeling andCharacterization (I) Characterization (II) Characterization (III)

338 13-1-1: General 214 13-6-1: Micro/ 215 13-7-1: Applied 215 13-3-3: Design and 216Topics of MEMS/ Nano Materials Mechanics and Fabrication, Analysis,NEMS and Devices Materials I Processes, and

Technology for Microand Nano Devices and Systems III

401 13-4-2: 215 2-7-2: Welding 23 2-9-2: Innovative 26Computational Performance Product Design IIStudies on MEMS Evaluation and and Nanostructures SimulationII

402 2-12-1: Variation 18 2-12-2: Variation 21 2-9-1: Innovative 24 12-14-4: 209Simulation and Simulation and Product Design I Experimental andDesign for Design for Theoretical ModelsAssembly I Assembly II for Anisotropic

Plasticity and Fracture

403 3-9-1: Materials 33 3-5-1: Beam, 34 3-3-1: Novel 35 3-13-1: Multibody 37and Structures at Plate, and Shell Aerodynamics and Dynamics SimulationHigh Temperature Structures Aerospace in Aerospaceand Extreme Propulsion Systems StructuresConditions

liii




404 12-21-4: Meso- 203 12-21-5: 207scale Modeling Uncertaintyand Material Modeling in Fracture Fracture andCharacterization Fatigue

405 10-29-5: Thermal 146 10-29-4: Thermal 150 13-8-1: Electric 216 13-7-2: Applied 217Engineering With Conductivity Field Driven Mechanics andPlasmonic Materials Microfluidics Materials II

406 10-30-2: Single- 150 10-30-1: Single- 152 10-30-3: Single- 154Phase Enhanced Phase Enhanced Phase EnhancedHeat Transfer: Heat Transfer: Heat Transfer:Numerical Studies Numerical Studies Numerical Studies– I – II – III

liv



1-1-1: Nonlinear Phononics

1-1-2: Micro and Nano Phononics

1-1-3: Design of Phononic Crystals and Metamaterials

1-1-4: Topological Phononics I

1-1-5: Topological Phononics II

1-1-6: Theory, Computation, and Experiments in Phononics

1-1-7: Control of Phononic Crystals and Metamaterials

1-11-1: NDE & SHM: Acoustic and Vibration Methods in Structural HealthMonitoring and Nondestructive Testing

1-12-1: NDE & SHM: Ultrasonic Waves for Material Characterization and DamageAssessment

1-13-1: Acoustics, Vibration, and Phononics Plenary

1-2-1: General Noise and Vibration Control

1-3-1: Computational Acoustics

1-4-1: Structural-Acoustic System Identification

1-6-1: Flow-Induced Acoustics and Human Perception of Noise

1-8-1: Vibration and Acoustic Measurements, Signal Processing, and TestFacilities I

1-8-2: Vibration and Acoustic Measurements, Signal Processing, and TestFacilities II

1-8-3: Vibration and Acoustic Measurements, Signal Processing, and TestFacilities III

Track OrganizersWeidong Zhu, University of Maryland,

United StatesMostafa Nouh, University at Buffalo,

United StatesShung H. Sung, SHS Consulting, LLC,

United States

Topic OrganizersMahmoud Hussein, University of

Colorado Boulder, United States Liang-Wu Cai, Kansas State University,

United StatesAlbert Kirwan, Electric Boat, United

StatesYousof Azizi, Bridgestone Americas,

United StatesMiao Yu, University of Maryland, United

States

Weidong Zhu, University of Maryland,Baltimore County, United States

Yongfeng Xu, University of Cincinnati,United States

Robert Tomko, Naval Nuclear Laboratory,United States

Kristin Cody, Naval Nuclear Laboratory,United States

Haijun Liu, Temple University, UnitedStates

Andrei Zagrai, New Mexico Institute ofMining & Technology, United States

Shiv Joshi, NextGen Aeronautics, UnitedStates

Session OrganizersMahmoud Hussein, University of

Colorado Boulder, United StatesAnkit Srivastava, Illinois Institute of

Technology, United States

Nicholas Boechler, University ofWashington, United States

Jinkyu Yang, University of Washington,United States

Kathryn Matlack, University of IllinoisUrbana-Champaign, United States

Brent Paul, Alion Science andTechnology, United States

Yongfeng Xu, University of Cincinnati,United States

Zhongquan Charlie Zheng, University ofKansas, United States

Firooz Bakhtiari-Nejad, AmirkabirUniversity of Technology, UnitedStates

TRACK 1 ACOUSTICS, VIBRATION, ANDPHONONICSMONDAY, NOVEMBER 12

1-1 PHONONIC CRYSTALS ANDMETAMATERIALS1-1-1 Nonlinear PhononicsThird Floor, David L. Lawrence Convention Center, Room 301

9:45am–11:30am

Session Chair: Mahmoud Hussein, University of ColoradoBoulder, Boulder, CO, United States

Session Co-Chair: Liang-Wu Cai, Kansas State University,Manhattan, KS, United States

9:45am – Nonlinear Wave Propagation in Reconfigurable 2DMultistable Lattices With Bistable SpringsTechnical Presentation. IMECE2018-89741Julien Meaud, Georgia Institute of Technology, Atlanta, GA,United States

10:06am – Switchable Phononics via Instabilities in SoftCompositesTechnical Presentation. IMECE2018-88467Stephan Rudykh, Technion - Israel Institute of Technology,Haifa, Israel

10:27am – Inter-Modal Energy Tunneling WithSubwavelength Characteristics in Nonlinear WaveguidesTechnical Presentation. IMECE2018-87877Weijian Jiao, Stefano Gonella, University of Minnesota,Minneapolis, MN, United States

10:48am – Conversion of Compressive Impact to TensileStress Waves via Origami-Based MechanicalMetamaterialsTechnical Presentation. IMECE2018-87767Hiromi Yasuda, Yasuhiro Miyazawa, Jinkyu Yang, Universityof Washington, Seattle, WA, United States

1-2 GENERAL NOISE AND VIBRATIONCONTROL1-2-1 General Noise and Vibration ControlThird Floor, David L. Lawrence Convention Center, Room 302

9:45am–11:30am

Session Chair: Albert Kirwan, Electric Boat, Groton, CT, UnitedStates

Session Co-Chair: Brent Paul, Alion Science and Technology,Harrisburg, PA, United States

9:45am – Numerical Investigation on Effects of StructureParameters on Acceleration Noise of Involute Spur GearSystem Under Different Operation ConditionsTechnical Paper Publication. IMECE2018-86955Changyin Wei, Jingang Wang, Hai Liu, Yong Chen, HebeiUniversity of Technology, Tianjin, China, Hanzhengnan Yu,China Automotive Technology & Research Center, Tianjin,China, Kunqi Ma, Hebei University of Technology, Tianjin,China

10:06am – An Improved Optimal Adaptive Control Methodfor MIMO Sine Vibration Control of a Multichannel CoupledSystemTechnical Paper Publication. IMECE2018-86983Li Chao, Zhangwei Chen, Zhejiang University, Hangzhou,China, Zu Hongfei, University of Pittsburgh, Pittsburgh, PA,United States, Zhao Yugang, Econ Technologies Co., Ltd.,Hangzhou, China

10:27am – Experimental Investigation on the Vibration andNoise Characteristics of the Vibration Damping AlloyMaterialTechnical Paper Publication. IMECE2018-87189Xiang Ji, Yong Chen, Hai Liu, Hebei University of Technology,Tianjin, China, Hanzhengnan Yu, China AutomotiveTechnology & Research Center, Tianjin, China, Changyin Wei,Zhibiao Yan, Hebei University of Technology, Tianjin, China

10:48am – Different Definitions of Entropy for StatisticalEnergy AnalysisTechnical Paper Publication. IMECE2018-87240Zahra Sotoudeh, Cal Poly Pomona, Pamona, CA, UnitedStates

11:09am – Objective Evaluation of FCV Interior SoundQuality During AccelerationTechnical Paper Publication. IMECE2018-87011Hai Liu, Hebei University of Technology, Tianjin, China,Yanyi Zhang, Dong Hao, China Automotive Technologyand Research Center, Tianjin, China, Yong Chen, Xiang Ji,Changyin Wei, Hebei University of Technology, Tianjin, China

1-8 VIBRATION AND ACOUSTICMEASUREMENTS, SIGNAL PROCESSING,AND TEST FACILITIES1-8-1 Vibration and Acoustic Measurements, SignalProcessing, andTest Facilities IFourth Floor, David L. Lawrence Convention Center, Room 403

9:45am–11:30am

Session Chair: Kristin Cody, Naval Nuclear Laboratory,Jefferson Hills, PA, United States

Session Co-Chair: Zhongquan Charlie Zheng, University ofKansas, Lawrence, KS, United States

9:45am – Analyzing Interrelationships Between StructuralDamping and Vibro-Acoustic Performances of ElasticMaterialsTechnical Presentation. IMECE2018-88778Antonio Figueroa, Mike Telenko, Shiloh Industries, Plymouth,MI, United States, Sean Wu, Lingguang Chen, Wayne StateUniversity, Detroit, MI, United States

10:06am – Parametric Study of Helmholtz ResonatorPerformance and Effect of Poroacoustic Material Use inResonator DesignTechnical Presentation. IMECE2018-88750Yasaman Esfandiari, Atul Kelkar, Shan Hu, Iowa StateUniversity, Ames, IA, United States

TRACK 1 ACOUSTICS, VIBRATION, AND PHONONICS – MONDAY, NOVEMBER 12

1

10:27am – On the Free Vibration Analysis of a SandwichBeam With Tip MassTechnical Paper Publication. IMECE2018-87535Eshagh Farzaneh Joubaneh, Oumar Rafiou Barry, CentralMichigan University, Mount Pleasant, MI, United States

10:48am – A Comprehensive Tool for Locating andAnalyzing Sound SourcesTechnical Presentation. IMECE2018-88800Yazhong Lu, Lingguang Chen, Wayne State University,Detroit, MI, United States

1-1 PHONONIC CRYSTALS ANDMETAMATERIALS1-1-2 Micro and Nano PhononicsThird Floor, David L. Lawrence Convention Center, Room 301

1:45pm–3:30pm

Session Chair: Ankit Srivastava, Illinois Institute of Technology,Chicago, IL, United States

1:45pm – Soft Opals Beyond Hypersonic PhononicsTechnical Presentation. IMECE2018-88712Yu Cang, Zuyuan Wang, Max Planck Institute for PolymerResearch, Mainz, Germany, Krzysztof Matyjaszewski,Micheal R. Bockstaller, Carnegie-Mellon University,Pittsburgh, PA, United States, George Fytas, Max PlanckInstitute for Polymer Research, Mainz, Germany

2:06pm – Direct Observation of Polymer Surface Mobilityvia Nanoparticle VibrationsTechnical Presentation. IMECE2018-88711Yu Cang, Eunsoo Kang, Bartlomiej Graczykowski, Max Planck Institute for Polymer Research, Mainz, Germany, Hojin Kim, University of Delaware, Newark, DE, United States,Maria Secchi, Maurizio Montagna, University of Trento,Trento, Italy, Rodney D. Priestley, Princeton University,Princeton, NJ, United States, Eric M. Furst, University ofDelaware, Newark, DE, United States, George Fytas, Max Planck Institute for Polymer Research, Mainz, Germany

2:27pm – The Effect of Randomness on the WavePropagation Characteristics of Open-Cell FoamsTechnical Presentation. IMECE2018-87861Alireza Bayat, Stavros Gaitanaros, Johns Hopkins University,Baltimore, MD, United States

2:48pm – Anisotropic Sub-GHz Phonon Propagation inFibrous Plant Cell WallsTechnical Presentation. IMECE2018-88622Maroun Abi Ghanem, University of California San Diego, LaJolla, CA, United States, Liliane Khoryati, Benaroya ResearchInstitute at Virginia Mason, Seattle, WA, United States, SamuelRaetz, Le Mans Université, Le Mans, France, AmeyKhanolkar, University of Washington, Seattle, WA, UnitedStates, Nicholas Boechler, University of California San Diego,La Jolla, CA, United States, Thomas Dehoux, UniversitéClaude Bernard Lyon 1, Villeurbanne, France

3:09pm – Thermal Conductivity Reduction by Full-SpectrumPhonon-Resonance HybridizationsTechnical Presentation. IMECE2018-87451Hossein Honarvar, Mahmoud Hussein, University ofColorado Boulder, Boulder, CO, United States

1-3 COMPUTATIONAL ACOUSTICS1-3-1 Computational AcousticsThird Floor, David L. Lawrence Convention Center, Room 302

1:45pm–3:30pm

Session Chair: Sue Sung, Ford, Dearborn, MI, United States

Session Co-Chair: Albert Kirwan, Electric Boat, Groton, CT,United States

1:45pm – Modeling the Wind Turbine Profiles Assuring theMaximum Lift Force With Low-Noise Operation for VariableWind VelocitiesTechnical Paper Publication. IMECE2018-86795Victorita Radulescu, University Politechnica of Bucharest,Bucharest, Romania

2:06pm – An Acoustic Analogy to Evaluate the TotalAcoustic Power of a Cooling Fan Using Mesh MorpherOptimizerTechnical Paper Publication. IMECE2018-86873Mike Kheirallah, Advanced Safety and Energy, Flint, MI,United States, Badih Jawad, Lawrence TechnologicalUniversity, Dearborn Heights, MI, United States, AbdallahHamieh, Liping Liu, Lawrence Technological University,Southfield, MI, United States

2:27pm – Structural-Acoustic Modeling and Optimization ofa Submarine Pressure HullTechnical Presentation. IMECE2018-89535James Spain, University of Michigan, Ann Arbor, MI, UnitedStates, Geng Zhang, Sergey Medyanik, MES, Ann Arbor, MI,United States, Nickolas Vlahopoulos, University of Michigan,Ann Arbor, MI, United States

2:48pm – Numerical Prediction of Hood Lift and Vibration ofTrailing AutomobilesTechnical Presentation. IMECE2018-89627Rodrigo Auza Gutierrez, Jack McNamara, Ohio StateUniversity, Columbus, OH, United States, Austin Kimbrell,Peter Kang, Honda R&D Americas, Inc., Raymond, OH, UnitedStates


2

1-8 VIBRATION AND ACOUSTICMEASUREMENTS, SIGNAL PROCESSING,AND TEST FACILITIES1-8-2 Vibration and Acoustic Measurements, SignalProcessing, and Test Facilities IIFourth Floor, David L. Lawrence Convention Center, Room 403

1:45pm–3:30pm

Session Chair: Robert Tomko, Naval Nuclear Laboratory,South Park, PA, United States

1:45pm – Use of Ultrasonic and Audio Signals to MonitorTemperature in Stratospheric BalloonsTechnical Paper Publication. IMECE2018-87131Matthew C. Jones, South Dakota School of Mines andTechnology, Westminster, CO, United States, Jason T. Ash,South Dakota School of Mines and Technology, Rapid City, SD,United States, Michael Smith, Raven Aerostar InternationalInc., Sulphur Springs, TX, United States, Charles R. Tolle,South Dakota School of Mines and Technology, Rapid City, SD,United States

2:06pm – The Study of Holey Cavity in the Application ofThermoacoustics ImagingTechnical Paper Publication. IMECE2018-87757Chang Liu, Ashkan Ghanbarzadeh Dagheyan, Juan HerediaJuesas, Ali Molaei, Jose Martinez Lorenzo, NortheasternUniversity, Boston, MA, United States

2:27pm – Application of a Resonant Metamaterial LineArray in Ultrasound Compressive ImagingTechnical Paper Publication. IMECE2018-88011Ashkan Ghanbarzadeh Dagheyan, Ali Molaei, Juan HerediaJuesas, Jose Martinez Lorenzo, Northeastern University,Boston, MA, United States

2:48pm – A Holey Cavity for High-Capacity UltrasoundImagingTechnical Paper Publication. IMECE2018-88028Ashkan Ghanbarzadeh Dagheyan, Juan Heredia Juesas,Chang Liu, Ali Molaei, Jose Martinez Lorenzo, NortheasternUniversity, Boston, MA, United States

1-1 PHONONIC CRYSTALS ANDMETAMATERIALS1-1-3 Design of Phononic Crystals andMetamaterialsThird Floor, David L. Lawrence Convention Center, Room 301

3:45pm–5:30pm

Session Chair: Nicholas Boechler, University of Washington,Seattle, WA, United States

3:45pm – Design of Acoustic Metamaterials Using GradientBased OptimizationTechnical Paper Publication. IMECE2018-88254Feruza Amirkulova, San Jose State University, San Jose, CA,United States, Andrew Norris, Rutgers University, Piscataway,NJ, United States

4:06pm – Broadening the Bandgaps of Sonic Crystals byVarying Shapes, Sizes, and Orientations of the ScatterersTechnical Paper Publication. IMECE2018-87398Debasish Panda, Amiya Ranjan Mohanty, Indian Institute ofTechnology Kharagpur, Kharagpur, West Bengal, India

4:27pm – Broadband Control of Propagating Waves UsingSmooth Changes in Flexural Rigidity: Lenses, Cloaks, andAcoustic PatternsTechnical Presentation. IMECE2018-87654Amir Darabi, Georgia Institute of Technology, Atlanta, GA,United States, Michael Leamy, Georgia Institute ofTechnology, Marietta, GA, United States

4:48pm – Tunable Tensegrity Metastructure forCompression-Torsion Coupled Wave ControlTechnical Presentation. IMECE2018-87338Rui Zhu, Yitian Wang, Xiaoning Liu, Gengkai Hu, BeijingInstitute of Technology, Beijing, China

5:09pm – A Metamaterials Design Approach From DiscreteModelsTechnical Presentation. IMECE2018-87903Kathryn Matlack, University of Illinois at Urbana-Champaign,Urbana, IL, United States, Marc Serra, ETH Zurich, Zurich,Switzerland, Antonio Palermo, California Institute ofTechnology, Pasadena, CA, United States, Sebastian Huber,ETH Zurich, Zurich, Switzerland, Chiara Daraio, CaliforniaInstitute of Technology, Pasadena, CA, United States

1-6 FLOW-INDUCED ACOUSTICS ANDHUMAN PERCEPTION OF NOISE1-6-1 Flow-Induced Acoustics and Human Perceptionof NoiseThird Floor, David L. Lawrence Convention Center, Room 302

3:45pm–5:30pm

Session Chair: Robert Tomko, Naval Nuclear Laboratory,South Park, PA, United States

Session Co-Chair: Haijun Liu, Temple University, Philadelphia,PA, United States

3:45pm – Human Response and Perception of UAV Noise inSimulated Warehouse EnvironmentsTechnical Presentation. IMECE2018-88081Jesse Callanan, Payam Ghassemi, James Dimartino,Christina Stocking, Souma Chowdhury, Mostafa Nouh,University at Buffalo, State University of New York, Buffalo, NY,United States

4:06pm – A Bio-Inspired Pressure Difference Receiver WithOptical DetectionTechnical Presentation. IMECE2018-88945Qian Dong, Haijun Liu, Temple University, Philadelphia, PA,United States


3

4:27pm – Quadruple Flow and Acoustic CoincidentResonance of Rotating Bladed Disks Interacting WithStationary ElementsTechnical Paper Publication. IMECE2018-86303Frank Kushner, Frank Kushner Consulting, Delmont, PA,United States

4:48pm – The Physics of Deep Surge in an AutomotiveTurbocharger Centrifugal Compression SystemTechnical Paper Publication. IMECE2018-87716Rick Dehner, Ahmet Selamet, Ohio State University,Columbus, OH, United States

5:09pm – Experimental Study on the Leakage andRotordynamic Coefficients of a Long Smooth Seal atLaminar Flow ConditionsTechnical Paper Publication. IMECE2018-88717Min Zhang, Praxair, Inc., Tonawanda, NY, United States,Dara Childs, Texas A&M University, College Station, TX,United States

1-8 VIBRATION AND ACOUSTICMEASUREMENTS, SIGNAL PROCESSING,AND TEST FACILITIES1-8-3 Vibration and Acoustic Measurements, SignalProcessing, and Test Facilities IIIFourth Floor, David L. Lawrence Convention Center, Room 403

3:45pm–5:30pm

Session Chair: Kristin Cody, Naval Nuclear Laboratory,Jefferson Hills, PA, United States

Session Co-Chair: Zhongquan Charlie Zheng, University ofKansas, Lawrence, KS, United States

3:45pm – On the Dynamic Loading Effects of Soil on PlasticWater Distribution Pipes and Its Significance for LeakDetection Using AcousticsTechnical Paper Publication. IMECE2018-87420Oscar Scussel, Michael J. Brennan, Universidade EstadualPaulista, Ilha Solteira, São Paulo, Brazil, Jennifer M.Muggleton, University of Southampton, Southampton, UnitedKingdom, Fabrício César Lobato de Almeida, UniversidadeEstadual Paulista, Tupã, São Paulo, Brazil, Amarildo TabonePaschoalini, Universidade Estadual Paulista, Ilha Solteira, São Paulo, Brazil

4:06pm – Capturing BW Zone in an Intact Rotor SystemTechnical Paper Publication. IMECE2018-87480Fatima Alhammadi, Mohammad AL-Shudeifat, OlegShiryayev, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emir.

4:27pm – Research on the Weak Signal Detection ofBearing Fault Based on Duffing OscillatorTechnical Paper Publication. IMECE2018-86892Long Hao, Dan Liu, Fei Liu, Qingxin Wang, Lin Liang,Guanghua Xu, Xi’an Jiaotong University, Xi’an, China

4:48pm – Deep Convolutional Neural Network for Early DiskCrack Diagnosis Under Variable SpeedTechnical Paper Publication. IMECE2018-87247Ruonan Liu, Ruqiang Yan, Meng Ma, Xuefeng Chen, Xi’anJiaotong University, Xi’an, Shaanxi, China


4


1-13 PLENARY1-13-1 Acoustics, Vibration, and Phononics PlenaryThird Floor, David L. Lawrence Convention Center, Room 305

8:00am–8:45am

8:00am – Active Acoustic MetamaterialsPlenary Presentation. IMECE2018-90090Amr Baz, University of Maryland, College Park, MD, UnitedStates

1-1 PHONONIC CRYSTALS ANDMETAMATERIALS1-1-4 Topological Phononics IThird Floor, David L. Lawrence Convention Center, Room 302

10:00am–11:45am

Session Chair: Mostafa Nouh, University at Buffalo, StateUniversity of New York, Buffalo, NY, United States

10:00am – Topological Phononic CrystalsTechnical Presentation. IMECE2018-87617Zeguo Chen, King Abdullah University of Science andTechnology, Thuwal, Saudi Arabia, Jun Mei, South ChinaUniversity of Technology, Guangzhou, China, Ying Wu,King Abdullah University of Science and Technology, Thuwal,Saudi Arabia

10:21am – One-Dimensional Linear Bidirectional AcousticDiodesTechnical Presentation. IMECE2018-86801Weiqiu Chen, Zhejiang University, Hangzhou, China

10:42am – Non-Reciprocal Wave Phenomena ThroughPump-Signal Wave Interaction in Discrete MetastructuresUndergoing Large DeformationTechnical Presentation. IMECE2018-87976Samuel P. Wallen, Benjamin M. Goldsberry, Michael R.Haberman, University of Texas at Austin, Austin, TX, UnitedStates

11:03am – Use of Betti-Reciprocity in MetamaterialsTechnical Presentation. IMECE2018-86358Amir Ashkan Mokhtari, Ankit Srivastava, Illinois Institute ofTechnology, Chicago, IL, United States

11:24am – Demonstration of Topological Waveguiding inLocally Resonant Plate StructuresTechnical Presentation. IMECE2018-87774Rajesh Chaunsali, Chun-Wei Chen, Jinkyu Yang, Universityof Washington, Seattle, WA, United States

1-4 STRUCTURAL-ACOUSTIC SYSTEMIDENTIFICATION1-4-1 Structural-Acoustic System IdentificationFourth Floor, David L. Lawrence Convention Center, Room 405

10:00am–11:45am

Session Chair: Weidong Zhu, University of Maryland,Baltimore County, Baltimore, MD, United States

Session Co-Chair: Yongfeng Xu, University of Cincinnati,Cincinnati, OH, United States

10:00am – Detection of Misfire in a Six-Cylinder DieselEngine Using Acoustic Emission SignalsTechnical Paper Publication. IMECE2018-86506Mohammad Jafari, Queensland University of Technology,Brisbane, Queensland, Australia, Pietro Borghesani,University of New South Wales, Sydney, New South Wales,Australia, Puneet Verma, Queensland University ofTechnology, Brisbane, Queensland, Australia, AshkanEslaminejad, North Dakota State University, Fargo, ND, UnitedStates, Zoran D. Ristovski, Richard J. Brown, QueenslandUniversity of Technology, Brisbane, Queensland, Australia

10:21am – An Acoustic Field Reconstruction Method ofNear-Field Acoustic Radiation Modes DecompositionTechnical Presentation. IMECE2018-88940Jie Wang, Zhejiang University of Technology, Zhejiang,Zhejiang, China, Zubin Liu, Zhejiang University of Technology,Hangzhou, Zhejiang, China, Liying Jiang, Zhejiang Universityof Technology, Zhejiang, China, Huancai Lu, ZhejiangUniversity of Technology, Hangzhou, China

10:42am – Operational Modal Analysis and DamageIdentification of Structures Undergoing Random VibrationUsing a Continuously Scanning Laser Doppler VibrometerSystemTechnical Paper Publication. IMECE2018-88058Daming Chen, University of Maryland, Baltimore County,Baltimore, MD, United States, Yongfeng Xu, University ofCincinnati, Cincinnati, OH, United States, Weidong Zhu,University of Maryland, Baltimore County, Baltimore, MD,United States

11:03am – Reducing Structure-Borne Sound Radiation viaVibro-Acoustic AnalysisTechnical Presentation. IMECE2018-88769Lingguang Chen, Sean Wu, Yazhong Lu, Wayne StateUniversity, Detroit, MI, United States

11:24am – Nonlinear Vibration Analysis of a FractionalViscoelastic Euler-Bernoulli MicrobeamTechnical Paper Publication. IMECE2018-87061Firooz Bakhtiari-Nejad, Ehsan Loghman, Mostafa Pirasteh,Amirkabir University of Technology, Tehran, MD, United States

TRACK 1 ACOUSTICS, VIBRATION, AND PHONONICS – TUESDAY, NOVEMBER 13

5

1-12 CONGRESS-WIDE SYMPOSIUM ONNDE & SHM: ULTRASONIC WAVES FORMATERIAL CHARACTERIZATION ANDDAMAGE ASSESSMENT1-12-1 NDE & SHM: Ultrasonic Waves for MaterialCharacterization and Damage AssessmentThird Floor, David L. Lawrence Convention Center, Room 301

10:00am–11:45am

Session Chair: Yongfeng Xu, University of Cincinnati,Cincinnati, OH, United States

Session Co-Chairs: Weidong Zhu, University of Maryland,Baltimore County, Baltimore, MD, United States, FiroozBakhtiari-Nejad, Amirkabir University of Technology, Tehran,MD, United States

10:00am – Elasto-Plastic Modeling of Beams forImpedance Based Structural Health MonitoringTechnical Paper Publication. IMECE2018-87910Naserodin Sepehry, Shahrood University of Technology,Shahrood, Iran, Firooz Bakhtiari-Nejad, Amirkabir Universityof Technology, Tehran, MD, United States, Weidong Zhu,University of Maryland, Baltimore County, Baltimore, MD,United States

10:21am – Real-Time Imaging of Damage Precursors inComplex CompositesTechnical Presentation. IMECE2018-88816Fatemeh Pourahmadian, University of Colorado Boulder,Boulder, CO, United States

10:42am – Computational Time- Domain Wave Modeling inAnisotropic PlateTechnical Presentation. IMECE2018-88863Sajan Shrestha, Sourav Banerjee, University of SouthCarolina, Columbia, SC, United States

11:03am – Passive Extraction of Green’s Function of Solidsand Application to High-Speed Rail InspectionTechnical Presentation. IMECE2018-89371Francesco Lanza Di Scalea, Albert Liang, Simone Sternini,Margherita Capriotti, University of California San Diego, LaJolla, CA, United States

11:24am – Generation and Propagation of Rayleigh SurfaceWave in Anisotropic Materials by Line-Focus UltrasonicTransducerTechnical Presentation. IMECE2018-88278Qiuyan Li, Chenglong Ji, Yuxiang Wang, Qing-Ming Wang,University of Pittsburgh, Pittsburgh, PA, United States

1-1 PHONONIC CRYSTALS ANDMETAMATERIALS1-1-5 Topological Phononics IIThird Floor, David L. Lawrence Convention Center, Room 301

1:45pm–3:30pm

Session Chair: Jinkyu Yang, University of Washington, Seattle,WA, United States

1:45pm – The Applicability of the Principle of Reciprocity inAcoustic MetamaterialsTechnical Presentation. IMECE2018-88611Allan Pierce, Retired, East Sandwich, MA, United States

2:06pm – Topological Mechanics of Edge Waves in KagomeLatticesTechnical Presentation. IMECE2018-88195Hui Chen, Hussein Nassar, Guoliang Huang, University ofMissouri, Columbia, MO, United States

2:27pm – Experimental Observation of Valley-Hall EdgeStates in Elastic Waveguides Based on Diatomic-Graphene-Like Phononic CrystalsTechnical Presentation. IMECE2018-89423Hongfei Zhu, Fabio Semperlotti, Ting-Wei Liu, PurdueUniversity, West Lafayette, IN, United States

2:48pm – Universal Wave Manipulation by Periodic Gyro-Elastic StructuresTechnical Presentation. IMECE2018-88926Mohammad Ali Attarzadeh, University at Buffalo, StateUniversity of New York, Tonawanda, NY, United States,Mostafa Nouh, University at Buffalo, State University of NewYork, Buffalo, NY, United States

1-1-6 Theory, Computation, and Experiments inPhononicsThird Floor, David L. Lawrence Convention Center, Room 302

1:45pm–3:30pm

Session Chair: Kathryn Matlack, University of Illinois Urbana-Champaign, Urbana, IL, United States

1:45pm – Study on Generation of Dual-Dirac Cone at k ? = 0and Its Features by Angle Based Tunable EngineeredPhononic CrystalTechnical Presentation. IMECE2018-89099Mustahseen Indaleeb, Hossain Ahmed, Sourav Banerjee,University of South Carolina, Columbia, SC, United States

2:06pm – Modeling and Experimentation on 3D PrintedDecoupled and Mixed Mode Mechanical MetamaterialsTechnical Presentation. IMECE2018-88336Alireza Amirkhizi, Fateme Aghighi, Joshua Morris, WeidiWang, University of Massachusetts, Lowell, Lowell, MA, UnitedStates


6

2:27pm – Deep Convolutional Neural Networks forEigenvalue Problems in MechanicsTechnical Presentation. IMECE2018-87281David Finol, Yan Lu, Illinois Institute of Technology, Chicago,IL, United States, Vijay Mahadevan, Amazon AWS AI, Seattle,IL, United States, Ankit Srivastava, Illinois Institute ofTechnology, Chicago, IL, United States

2:48pm – The Phononic Problem Under the SpectralTheoremTechnical Presentation. IMECE2018-89670Ankit Srivastava, Illinois Institute of Technology, Chicago, IL,United States

1-11 CONGRESS-WIDE SYMPOSIUM ONNDE & SHM: ACOUSTIC AND VIBRATIONMETHODS IN STRUCTURAL HEALTHMONITORING AND NONDESTRUCTIVETESTING1-11-1 NDE & SHM: Acoustic and Vibration Methodsin Structural Health Monitoring and NondestructiveTestingFourth Floor, David L. Lawrence Convention Center, Room 405

1:45pm–3:30pm


Session Co-Chair: Yongfeng Xu, University of Cincinnati,Cincinnati, OH, United States

1:45pm – Effect of Angular Acceleration and UnbalanceForce Orientation on the Backward Whirl in CrackedRotorsTechnical Paper Publication. IMECE2018-87476Fatima Alhammadi, Mohammad AL-Shudeifat, OlegShiryayev, Khalifa University of Science and Technology, AbuDhabi, United Arab Emir.

2:06pm – A Nondestructive Evaluation Method Based onthe Propagation of Nonlinear Solitary WavesTechnical Presentation. IMECE2018-87555Amir Nasrollahi, Piervincenzo Rizzo, University of Pittsburgh,Pittsburgh, PA, United States

2:27pm – Transmission of Information by AcousticCommunication Along Metal Pathways in Nuclear FacilitiesTechnical Presentation. IMECE2018-88155Alexander Heifetz, Richard Vilim, Sasan Bakhtiari, ArgonneNational Laboratory, Lemont, IL, United States

2:48pm – “Flute Without Flute” An Experiment inTurbulence ManagementTechnical Presentation. IMECE2018-88722B.G. Shiva Prasad, Fluid Thermal Technologies, Sidney, OH,United States

1-1 PHONONIC CRYSTALS ANDMETAMATERIALS1-1-7 Control of Phononic Crystals andMetamaterialsThird Floor, David L. Lawrence Convention Center, Room 301

3:45pm–5:30pm

Session Chair: Mahmoud Hussein, University of ColoradoBoulder, Boulder, CO, United States

Session Co-Chair: Liang-Wu Cai, Kansas State University,Manhattan, KS, United States

3:45pm – Active Acoustic Metamaterials withProgrammable Densities Using an H-∞ ControllerTechnical Paper Publication. IMECE2018-87749Amr Baz, University of Maryland, College Park, MD, UnitedStates

4:06pm – A Programmable Metasurface for Real TimeControl of Broadband Elastic RaysTechnical Presentation. IMECE2018-88554Yangyang Chen, Xiaopeng Li, Hussein Nassar, GuoliangHuang, University of Missouri, Columbia, MO, United States

4:27pm – The Auxetic Nature of Shunted PiezoelectricsTechnical Presentation. IMECE2018-89490Carson Willey, UES, Inc./AFRL, WPAFB, OH, United States,Philip Buskohl, Abigail Juhl, AFRL/RXAS, WPAFB, OH, UnitedStates

4:48pm – Tunable Phononic Crystals With Kirigami-BasedStructuresTechnical Presentation. IMECE2018-88877Ronghao Bao, Zhejiang Univeristy, Hangzhou, Zhejiang, China

5:09pm – 3D Printed Magnetorheological ElastomerMetastructures With Magnetically Tunable Band GapsTechnical Presentation. IMECE2018-89586Connor D. Pierce, University of Illinois at Urbana-Champaign,Urbana, IL, United States, Vincent Chen, James Hardin,Carson Willey, UES, Inc./AFRL, WPAFB, OH, United States,Dan Berrigan, Air Force Research Laboratory, WPAFB, OH,United States, Abigail Juhl, AFRL/RXAS, WPAFB, OH, UnitedStates, Kathryn Matlack, University of Illinois at Urbana-Champaign, Urbana, IL, United States


7

NOTES

8

2-1-1: Advanced Manufacturing Plenary2-11-1: Advanced Manufacturing Processes-Modeling and Simulation I2-11-2: Advanced Manufacturing Processes-Modeling and Simulation II2-11-3: Advanced Manufacturing Processes-Modeling and Simulation III2-11-4: Advanced Manufacturing Processes-Modeling and Simulation V2-12-1: Variation Simulation and Design for Assembly I2-12-2: Variation Simulation and Design for Assembly II2-13-1: Congress-Wide Symposium on Additive Manufacturing: Robotic Additive

Manufacturing2-13-2: Manipulators and Interfaces2-13-3: Algorithms and Optimization2-14-1: Surface Modification based on Laser Peening and Ablation2-14-2: Laser-Matter Interaction and Its Applications in Materials Processing2-15-1: Digital Manufacturing in Cyber-Manufacturing Aspects2-15-2: Digital Manufacturing in Digital Twin Aspects2-15-3: Digital Manufacturing in Industry 4.0 Aspects2-2-1: Congress-Wide Symposium on Additive Manufacturing: Metals – Directed Energy

Deposition I2-2-2: Congress-Wide Symposium on Additive Manufacturing: Metals – Directed Energy

Deposition II2-2-3: Congress-Wide Symposium on Additive Manufacturing: Metals – Powder Bed Fusion I2-2-4: Congress-Wide Symposium on Additive Manufacturing: Metals – Powder Bed Fusion II2-2-5: Congress-Wide Symposium on Additive Manufacturing: Polymers I2-2-6: Congress-Wide Symposium on Additive Manufacturing: Polymers II2-2-7: Congress-Wide Symposium on Additive Manufacturing: Composites/Ceramics &

Bio-Applications2-4-1: Nanomanufacturing: Spray or Print Deposition Techniques for Nanomaterials and

Nanostructures2-4-2: Nanomanufacturing: Nanomaterials Synthesis and Assembly2-4-3: Nanomanufacturing: Integration of Nanoscale Materials or Textures for Enhanced

Performance2-5-1: Mechanics and Physics of 2D Materials2-5-2: Sensors and Electronics of 2D Materials2-5-3: Synthesis and Processing of 2D Materials2-6-1: Advanced Surface Modification Using Machining2-6-2: Conventional Machining2-6-3: Assisted Machining Techniques2-6-4: Nontraditional Machnining Processes2-6-5: Machinability of Engineering Materials2-6-6: Cutting Tool Performance and Treatment2-7-1: Bonded Joint and Bolted Joint Technologies2-7-2: Welding Performance Evaluation and Simulation2-8-1: Novel Processes2-8-2: Formability – I2-8-3: Formability – II2-8-4: Testing and Defects2-9-1: Innovative Product Design I2-9-2: Innovative Product Design II

Track OrganizersJunghoon Yeom, Michigan State

University, United StatesRuth Jill Urbanic, University of Windsor,

CanadaWilliam Emblom, University of Louisiana-

Lafayette, United StatesMarriner Merrill, US Naval Research

Laboratory, United States

Topic OrganizersJunghoon Yeom, Michigan State

University, United StatesRuth Jill Urbanic, University of Windsor,

CanadaScott Thompson, Auburn University,

United StatesNima Shamsaei, Auburn University,

United StatesMehran Tehrani, University of New

Mexico, United StatesMatt Maschmann, University of Missouri,

United StatesDimitry Papkov, University of Nebraska-

Lincoln, United StatesChih-Hao Chang, North Carolina State

University, United StatesPilgyu Kang, George Mason University,

United StatesSungWoo Nam, University of Illinois,

Urbana-Champaign (UIUC), UnitedStates

Chi Hwan Lee, Purdue University, UnitedStates

Muhammad Jahan, Miami University,United States

Chang Ye, University of Akron, UnitedStates

Sathish Kannan, American University ofSharjah, United Arab Emirates

Yang Guo, Michigan State University,United States

Sayed Nassar, Oakland University,United States

Zhijun (Jason) Wu, Oakland University,United States

Thomas Whitney, University of Dayton,United States

Chetan Nikhare, Pennsylvania StateUniversity, United States

Scott Wagner, Michigan Tech, UnitedStates

Ricardo Jardim-Goncalves, UniversidadeNova De Lisboa - Faculdade DeCincias E Tecnologia, Portugal

Joao Silva, Universidade do Minho,Portugal

David Romero, ITEMS, MexicoSiddharthsinh Jadeja, Aditya Silver Oak

Institute of Technology, India

Jianfeng Ma, Saint Louis University,United States

Yucheng Liu, Mississippi StateUniversity, United States

Stephanie Wimmer, Naval ResearchLaboratory, United States

Kristina Wärmefjord, Chalmers Universityof Technology, Sweden

Hua Wang, Shanghai Jiao TongUniversity, China

Daniel Cox, Georgia Southern University,United States

Andrzej Nycz, Oak Ridge NationalLaboratory, United States

Chang Ye, University of Akron, UnitedStates

Xin Zhao, Clemson University, UnitedStates

Dong Lin, Kansas State University,United States

Wenda Tan, University of Utah, UnitedStates

Yeqing Wang, Mississippi StateUniversity, United States

David Guerra-Zubiaga, Kennesaw StateUniversity, United States

Germanico Gonzalez-Badillo,Universidad Autonoma De San LuisPotosi, Mexico

Kai He, Shenzhen Institutes of AdvancedTechnology, Chinese Academy ofSciences, China

Session OrganizersRoozbeh (Ross) Salary, Marshall

University, United StatesScott Thompson, Auburn University,

United States Nima Shamsaei, Auburn University,

United States Ruth Jill Urbanic, University of Windsor,

CanadaAlbert To, University of Pittsburgh, United

StatesMehran Tehrani, University of New

Mexico, United States Junghoon Yeom, Michigan State

University, United States Heather Lai, SUNY New Paltz, United

StatesDeborah D.L. Chung, University at

Buffalo, State University of NY, UnitedStates

Gretar Tryggvason, Johns HopkinsUniversity, United States

Matt Maschmann, University of Missouri,United States

Chih-Hao Chang, North Carolina StateUniversity, United States

Dimitry Papkov, University of Nebraska-Lincoln, United States

Pilgyu Kang, George Mason University,United States

Mike Cai Wang, University of SouthFlorida, United States

Pawan Tyagi, University of the District ofColumbia, United States

Muhammad Jahan, Miami University,United States

Lewis Payton, Auburn University, UnitedStates

P.V.M. Rao, IIT Delhi, IndiaSathish Kannan, American University of

Sharjah, United Arab Emir. Chang Ye, University of Akron, United

StatesGuha Manogharan, Penn State

University, United States Yang Guo, Michigan State University,

United StatesDerek Yip-Hoi, Western Washington

University, United StatesMuhammad Jahan, Miami University,

United States Ihab Ragai, Penn State University, United

StatesSayed Nassar, Oakland University,

United StatesThomas Whitney, University of Dayton,

United StatesChetan Nikhare, Pennsylvania State

University, United StatesMolla Hasan, Department of Mechanical

and Aerospace Engineering, Rutgers,United States

Ricardo Jardim-Goncalves, UniversidadeNova De Lisboa – Faculdade DeCincias E Tecnologia, Portugal

Joao Silva, Universidade do Minho,Portugal

Joao Sarraipa, UNINOVA –DEE/FCT/UNL, Portugal

Virginia DeGiorgi, Naval Research Lab,United States


Jose Teixeira, University of Minho,Portugal

Tien-Chien Jen, University ofJohannesburg, South Africa

Hua Wang, Shanghai Jiao TongUniversity, China

Sriharsha Srinivas Sundarram, FairfieldUniversity, United States

Germanico Gonzalez-Badillo,Universidad Autonoma De San LuisPotosi, Mexico

TRACK 2ADVANCED MANUFACTURINGWEDNESDAY, NOVEMBER 14

2-1 ADVANCED MANUFACTURINGPLENARY2-1-1 Advanced Manufacturing PlenaryThird Floor, David L. Lawrence Convention Center, Room 305

9:00am–9:45am

9:00am – Manufacturing for XPlenary Presentation. IMECE2018-90091Jian Cao, Northwestern University, Evanston, IL, United States

2-2 CONGRESS-WIDE SYMPOSIUM ONADDITIVE MANUFACTURING2-2-1 Congress-Wide Symposium on AdditiveManufacturing: Metals-Directed Energy Deposition IThird Floor, David L. Lawrence Convention Center, Room 301

10:00am–11:45am

Session Chair: Scott Thompson, Auburn University, Auburn,AL, United States

Session Co-Chairs: Nima Shamsaei, Auburn University,Auburn, AL, United States, Roozbeh (Ross) Salary, MarshallUniversity, Huntington, WV, United States

10:00am – Thermal-Mechanical Study of 3D PrintingTechnology for Rail RepairTechnical Paper Publication. IMECE2018-86315Ershad Mortazavian, Zhiyong Wang, University of Nevada,Las Vegas, Las Vegas, NV, United States, Hualiang Teng,University of Nevada, Las Vegas, Henderson, NV, United States

10:21am – Additive Manufacturing Bead Deposition BasedRotary Tool Path ApplicationsTechnical Paper Publication. IMECE2018-86461Ruth Jill Urbanic, University of Windsor, La Salle, ON,Canada, Robert Hedrick, CAMufacturing Solutions Inc., LaSalle, ON, Canada

10:42am – Directed Energy Deposition of Magnetic ShapeMemory Alloy Ni-Mn-Ga: Towards Epitaxial GrowthTechnical Presentation. IMECE2018-87160Jakub Toman, University of Pittsburgh, Pittsburgh, PA, UnitedStates, Peter Müllner, Boise State University, Boise, ID, UnitedStates, Markus Chmielus, University of Pittsburgh, Pittsburgh,PA, United States

11:03am – ODS Coating for Critical Turbine ComponentsUsing DED Additive ManufacturingTechnical Paper Publication. IMECE2018-87512Eric Chia, Bruce Kang, West Virginia University, Morgantown,WV, United States, Zheng Min, University of Pittsburgh,Wexford, PA, United States, Yang Li, Minking Chyu, Universityof Pittsburgh, Pittsburgh, PA, United States

11:24am – Effect of Welding Mode on Microstructure andMechanical Properties of Aluminum Fabricated by Wire andArc Additive ManufacturingTechnical Presentation. IMECE2018-88703Xuewei Fang, Lijuan Zhang, Bingheng Lu, Xi’An JiaotongUniversity, Xi’an, China

2-5 MANUFACTURING OF ATOMICALLY-THIN, TWO-DIMENSIONAL MATERIALS2-5-1 Mechanics and Physics of 2D MaterialsThird Floor, David L. Lawrence Convention Center, Room 304

10:00am–11:45am

Session Chair: Pilgyu Kang, George Mason University, Fairfax,VA, United States

Session Co-Chairs: SungWoo Nam, University of Illinois atUrbana-Champaign, Urbana, IL, United States, Mike Cai Wang,University of South Florida, Tampa, FL, United States

10:00am – Large-Area Solution-Manufactured Air-Stable 2DMaterial for High-Performance Electronics and SmartSensorsInvited Presentation. IMECE2018-86603Wenzhuo Wu, Purdue University, West Lafayette, IN, UnitedStates

10:42am – Large-Scale Nano-Manufacturing of Highly-Uniform 0D/1D/2D Heterostructures via Self-AssemblyTechnical Presentation. IMECE2018-89830Michael Cai Wang, University of South Florida, Tampa, FL,United States, Matthew Thomas Gole, Juyoung Leem,Wayne Lin, Rachel Ziran Zhou, Paolo Furlanetto Ferrari,Arend van der Zande, Catherine Jones Murphy, SungWooNam, University of Illinois at Urbana-Champaign, Urbana, IL,United States

11:03am – Spatial Nanomechanical Mapping of GrapheneMonolayers on Crystalline SubstratesTechnical Presentation. IMECE2018-89489Matt Robertson, Kaihao Zhang, Matt Poss, Sameh Tawfick,University of Illinois at Urbana-Champaign, Urbana, IL, UnitedStates

11:24am – Anomalous Corrosion Dynamics of Two-Dimensional (2D) Layered MaterialsTechnical Presentation. IMECE2018-89856Yu-ting Huang, Honk Kong University, Pok Fu Lam, HongKong, Hong Kong, Akhil Dodda, Pennsylvania State University,State College, PA, United States, Amritanand Sebastian,Pennsylvania State University, University Park, PA, UnitedStates, Daniel Schulman, Penn State University, UniversityPark, PA, United States, Saptarshi Das, Pennsylvania StateUniversity, State College, PA, United States

TRACK 2 ADVANCED MANUFACTURING – WEDNESDAY, NOVEMBER 14

9

2-6 ADVANCED MACHINING ANDFINISHING2-6-1 Advanced Surface Modification UsingMachiningThird Floor, David L. Lawrence Convention Center, Room 305

10:00am–11:45am

Session Chair: Pawan Tyagi, University of the District ofColumbia, Washington, DC, United States

Session Co-Chair: Muhammad Jahan, Miami University,Oxford, OH, United States

10:00am – Study on Grinding Force and Surface Roughnessof Ni3Al Based SuperalloyTechnical Paper Publication. IMECE2018-86959Xiaoxiang Zhu, Wenhu Wang, Ruisong Jiang, Xiaofen Liu,Northwestern Polytechnical University, Xi’an, Shaanxi, China

10:21am – Scanning Electron Microscopy and OpticalProfilometry of Electropolished Additively Manufactured316 Steel ComponentsTechnical Paper Publication. IMECE2018-88339Pawan Tyagi, Tobias Goulet, Denikka Brent, University of the District of Columbia, Washington, DC, United States,Francisco Garcia-Moreno, Department of Energy’s NationalSecurity Campus, managed by Honeywell, Kansas City, MO,United States, Kate Klein, University of the District ofColumbia, Washington, DC, United States

10:42am – Chemical Polishing Based Surface Finishing of3D Printed Steel ComponentsTechnical Paper Publication. IMECE2018-88378Pawan Tyagi, Tobias Goulet, Nitt Chuenprateep, RobertStephenson, Rudolph Knott, Antione Reddick, University ofthe District of Columbia, Washington, DC, United States, JustinSchlitzer, Francisco Garcia-Moreno, Cordell Benton, KansasCity National Security Campus, managed by Honeywell,Kansas City, MO, United States, Devdas Shetty, University ofthe District of Columbia, Washington, DC, United States

11:03am – Improved Mechanical Properties andHierarchical Surfaces of 316 Stainless Steel Processed byUltrasonic Nanocrystal Surface ModificationTechnical Presentation. IMECE2018-89950Xiaoning Hou, Jun Liu, Hao Zhang, Gary Doll, University ofAkron, Akron, OH, United States, Ashlie Martini, University ofCalifornia -Merced, Atwater, CA, United States, Yalin Dong,University of Akron, Akron, OH, United States, Chang Ye,University of Akron, Peninsula, OH, United States

11:24am – Influence of Surface Pretreatment on theHydrophobic Silane Coating on AISI 304 SteelTechnical Paper Publication. IMECE2018-86256Akinsanya Damilare Baruwa, University of Johannesburg,Johannesburg, Gauteng, South Africa, Oluseyi Philip Oladijo,Botswana International University of Science and Technology,Palapye, Palapye, Botswana, Nthabiseng Maledi, University ofthe Witwatersrand, Johannesburg, Gauteng, South Africa,Esther Akinlabi, University of Johannesburg, Johannesburg,South Africa

2-13 ROBOTICS & AUTOMATION INADVANCED MANUFACTURING2-13-1 Congress-Wide Symposium on AdditiveManufacturing: Robotic Additive ManufacturingThird Floor, David L. Lawrence Convention Center, Room 302

10:00am–11:45am

Session Chair: Daniel Cox, Georgia Southern University,Statesboro, GA, United States

Session Co-Chair: Andrzej Nycz, Oak Ridge NationalLaboratory, Oak Ridge, TN, United States

10:00am – High-Throughput 3D Metal PrintingTechnical Presentation. IMECE2018-87216Michael R. Sullivan, Deborah D.L. Chung, University atBuffalo, State University of New York, Buffalo, NY, UnitedStates

10:21am – The Effects of Direct Energy DepositionProcesses on the Thermal Properties of InvarTechnical Presentation. IMECE2018-89770Alex Arbogast, Oak Ridge National Laboratory, Knoxville, TN,United States, Mark W. Noakes, Christopher Masuo, AndrzejNycz, Oak Ridge National Laboratory, Oak Ridge, TN, UnitedStates

10:42am – Weld Pool and Bead Characterization for GravityAligned (GA) and Non-Gravity Aligned (NGA) Wire-ArcAdditive ManufacturingTechnical Presentation. IMECE2018-89787Joshua Penney, William Hamel, J.L. McNeil, University ofTennessee, Knoxville, TN, United States

11:03am – A Framework for Path Planning of Large ScaleAdditive Metals Manufacturing in Arbitrary DirectionsTechnical Presentation. IMECE2018-89824James McNeil, William Hamel, Josh Penney, University ofTennessee, Knoxville, TN, United States

11:24am – Effect of Shielding Gas on Metal Big AreaAdditive ManufacturingTechnical Presentation. IMECE2018-89723Bishal Silwal, Georgia Southern University, Statesboro, GA,United States, Andrzej Nycz, Mark W. Noakes, ChristopherMasuo, Oak Ridge National Laboratory, Oak Ridge, TN, UnitedStates, Derek Vaughan, University of Purdue, West Lafayette,IN, United States, David Marsh, Oak Ridge NationalLaboratory, Oak Ridge, TN, United States


10

2-14 LASER-BASED ADVANCEDMANUFACTURING AND MATERIALSPROCESSING2-14-1 Surface Modification based on Laser Peeningand AblationThird Floor, David L. Lawrence Convention Center, Room 306

10:00am–11:45am

Session Chair: Yeqing Wang, Mississippi State University,Mississippi State, MS, United States

Session Co-Chair: Chang Ye, University of Akron, Peninsula,OH, United States

10:00am – Ablation Characteristics of Nanosecond LaserPulsed Ablation of AluminumTechnical Paper Publication. IMECE2018-87635Yeqing Wang, Mississippi State University, Mississippi State,MS, United States, Daniel Diaz, David Hahn, University ofFlorida, Gainesville, FL, United States

10:21am – Improvement of Fatigue Life of Tool Steel byLaser Shock PeeningTechnical Presentation. IMECE2018-88868Sachin Patil, Bharat Forge Ltd., Pune, Maharashtra, India

10:42am – Microstructure Evolution in Ti64 Subjected toLaser-Assisted Ultrasonic Nanocrystal SurfaceModificationTechnical Presentation. IMECE2018-89553Jun Liu, University of Akron, Akron, OH, United States, SergeySuslov, Qatar Environment and Energy Research Institute,Doha, Qatar, Zhencheng Ren, Yalin Dong, University of Akron,Akron, OH, United States, Chang Ye, University of Akron,Peninsula, OH, United States

11:03am – The Effects of Laser Shock Peening on theMechanical Properties and Biomedical Behavior of AZ31BMagnesium AlloyTechnical Presentation. IMECE2018-89781Chang Ye, University of Akron, Peninsula, OH, United States,Ruixia Zhang, University of Akron, Akron, OH, United States,Xianfeng Zhou, Qingdao University of Science andEngineering, Qingdao, China, Hongyu Gao, SaarlandUniversity, Saarbrücken, Germany, Steven Mankoci, Universityof Akron, Akron, OH, United States, Yang Liu, North CarolinaState University, Raleigh, NC, United States, Xiahan Sang,Center for Nanophase Materials Sciences, ORNL, Oak Ridge,TN, United States, Haifeng Qin, Xiaoning Hou, ZhenchengRen, Gary Doll, University of Akron, Akron, OH, United States,Ashlie Martini, University of California-Merced, Atwater, CA,United States, Yalin Dong, Nita Sahai, University of Akron,Akron, OH, United States

11:24am – Effect of Electron Beam Weld Bead Geometry onthe Mechanical Properties of Ti6Al4V AlloyTechnical Presentation. IMECE2018-88866Sandeep Thakare, Kalyani Centre for Technology andInnovation, Bharat Forge Ltd., Pune, Maharashtra, India

2-15 DIGITAL MANUFACTURINGSIMULATION AND VALIDATION2-15-1 Digital Manufacturing in Cyber-Manufacturing AspectsThird Floor, David L. Lawrence Convention Center, Room 303

10:00am–11:45am

Session Chair: David Guerra-Zubiaga, Kennesaw StateUniversity, Marietta, GA, United States

Session Co-Chair: Kai He, Shenzhen Institutes of AdvancedTechnology, Chinese Academy of Sciences, China, Shenzhen,China, Germanico Gonzalez-Badillo, Universidad Autonoma deSan Luis Potosi, Rioverde San Luis Potosi, Mexico

10:00am – Taxonomy for Secure CyberManufacturingSystemsTechnical Paper Publication. IMECE2018-86091Mingtao Wu, Syracuse University, Fayetteville, NY, UnitedStates, Young Moon, Syracuse University, Syracuse, NY,United States

10:21am – A Novel Framework in ManufacturingAutomation to Implement Cyber-Manufacturing SystemsTechnical Paper Publication. IMECE2018-88243David Guerra-Zubiaga, Kennesaw State University, Marietta,GA, United States, Kathy Schwaig, Kennesaw StateUniversity, Kennesaw, GA, United States, Mason Felix, JohnCalfee, Aubrey Sims, Kennesaw State University, Marietta,GA, United States, Tu Vo, Kennesaw State University,Kennesaw, GA, United States

10:42am – CyberManufacturing System: A Solution forSustainable ManufacturingTechnical Paper Publication. IMECE2018-86092Zhengyi Song, Young Moon, Syracuse University, Syracuse,NY, United States

11:03am – An Internet-of-Things Based Framework forCollaborative Cyber Physical Tasks in Micro AssemblyTechnical Paper Publication. IMECE2018-88542J. Cecil, Aaron Cecil-Xavier, Sadiq Albuhamood, OklahomaState University, Stillwater, OK, United States

11:24am – A New Design of Cycloidal Planetary ReducerWith Internal Cycloidal ProfileTechnical Paper Publication. IMECE2018-86184He Mao, Guanyi Liu, Deqiang Zeng, Yaning Cao, Kai He,Shenzhen Institutes of Advanced Technology, ChineseAcademy of Sciences, Shenzhen, China, Ruxu Du, ChineseUniversity of Hong Kong, Hong Kong, Hong Kong


11

2-2 CONGRESS-WIDE SYMPOSIUM ONADDITIVE MANUFACTURING2-2-2 Congress-Wide Symposium on AdditiveManufacturing: Metals-Directed Energy Deposition IIThird Floor, David L. Lawrence Convention Center, Room 301

1:45pm–3:30pm


Session Co-Chairs: Nima Shamsaei, Auburn University,Auburn, AL, United States, Ruth Jill Urbanic, University ofWindsor, La Salle, ON, Canada

1:45pm – Application of Electrostatic Adhesion Method inMetal-Powder-Based Additive Manufacturing Layer-Forming ProcessTechnical Paper Publication. IMECE2018-88741Teng-Yueh Tsao, Jen-Yuan (James) Chang, National TsingHua University, Hsinchu, Hsinchu, Taiwan

2:27pm – Meshfree Simulation of Oxide Dispersion in Solid-State Additive Manufacturing of Aluminum AlloysTechnical Presentation. IMECE2018-89026Robert Escobar Jr., University of Alabama, Tuscaloosa, AL,United States, Kirk Fraser, National Research Council Canada,Saguenay, QC, Canada, J.B. Jordon, Paul Allison, Universityof Alabama, Tuscaloosa, AL, United States

2:48pm – Application of a Fast-Solving Semi-AnalyticalHeat Transfer Model to Additive Manufacturing AlloyDevelopmentTechnical Presentation. IMECE2018-89880Nicholas Jones, Jack Beuth, Bryan Webler, Yining He,Carnegie Mellon University, Pittsburgh, PA, United States

3:09pm – A Computational Fluid Dynamics (CFD) Study ofMaterial Transport and Deposition in Aerosol Jet Printing(AJP) ProcessTechnical Paper Publication. IMECE2018-87647Roozbeh (Ross) Salary, Marshall University, Huntington, WV,United States, Jack P. Lombardi III, Darshana L.Weerawarne, State University of New York at Binghamton,Vestal, NY, United States, Prahalad Rao, University ofNebraska–Lincoln, Lincoln, NE, United States, Mark D. Poliks,State University of New York at Binghamton, Vestal, NY, UnitedStates

2-5 MANUFACTURING OF ATOMICALLY-THIN, TWO-DIMENSIONAL MATERIALS2-5-2 Sensors and Electronics of 2D MaterialsThird Floor, David L. Lawrence Convention Center, Room 304

1:45pm–3:30pm


Session Co-Chairs: Mike Cai Wang, University of SouthFlorida, Tampa, FL, United States, SungWoo Nam, University ofIllinois at Urbana-Champaign, Urbana, IL, United States

1:45pm – 2D Materials Based Epidermal and ImplantableConformal BioelectronicsInvited Presentation. IMECE2018-89975Nanshu Lu, University of Texas at Austin, Austin, TX, UnitedStates

2:27pm – Air Stable Black Phosphourus Sensors forHumidity DetectionTechnical Presentation. IMECE2018-89891Jinshui Miao, Junghoon Yeom, Michigan State University,East Lansing, MI, United States, Chuan Wang, WashingtonUniversity in St. Louis, St. Louis, MO, United States

2:48pm – Crumple Nanostructuring of Atomically-Thin Two-Dimensional (2D) Materials for Flexible OptoelectronicDevices and Plasmonic MetamaterialsTechnical Presentation. IMECE2018-89943Pilgyu Kang, George Mason University, Fairfax, VA, UnitedStates

2-6 ADVANCED MACHINING ANDFINISHING2-6-2 Conventional MachiningThird Floor, David L. Lawrence Convention Center, Room 305

1:45pm–3:30pm

Session Chair: Lewis Payton, Auburn University, AuburnUniversity, AL, United States

Session Co-Chair: P.V.M. Rao, IIT Delhi, New Delhi, India

1:45pm – Determining Cutting Pressure Coefficients forAluminum 6061-T6 Using a Small Number of DrillingExperimentsTechnical Paper Publication. IMECE2018-86224Charbel Seif, American University of Beirut, Beirut, Lebanon,Ilige Hage, Notre Dame University-Louaize, Zouk Mosbeh,Lebanon, Ramsey Hamade, American University of Beirut,Beirut, Riad El Solh, Lebanon

2:06pm – Dislocation Theory of Orthogonal Metal Cutting ofCu-Zn AlloysTechnical Paper Publication. IMECE2018-87634Lewis Payton, Auburn University, Auburn University, AL,United States


12

2:27pm – Study on Turning of Non-Axisymmetric Three-Dimensional Curved SurfacesTechnical Paper Publication. IMECE2018-87377Taichi Mori, Yoshitaka Morimoto, Akio Hayashi, KanazawaInstitute of Technology, Nonoichi, Isikawa, Japan, YoshiyukiKaneko, Naohiko Suzuki, Ryo Hirono, Takamatsu MachineryCo., Ltd., Isikawa, Isikawa, Japan

2:48pm – Orthogonal Machining of Copper Alloy with aHardness GradientTechnical Paper Publication. IMECE2018-87524Lewis Payton, Auburn University, Auburn University, AL,United States

3:09pm – Process Planning Strategies to Reduce EnergyConsumption in MachiningTechnical Paper Publication. IMECE2018-87735Arun Unnikrishnan, P.V.M. Rao, IIT Delhi, New Delhi, India

2-13 ROBOTICS & AUTOMATION INADVANCED MANUFACTURING2-13-2 Manipulators and InterfacesThird Floor, David L. Lawrence Convention Center, Room 302

1:45pm–3:30pm



1:45pm – Additive Manufacturing-Based ManipulatorDesign, Fabrication, and TestingTechnical Presentation. IMECE2018-89800Mark W. Noakes, Bradley S. Richardson, Oak Ridge NationalLaboratory, Oak Ridge, TN, United States

2:06pm – VR-Mediated Teleoperation With Glove-LikeInterfacesTechnical Paper Publication. IMECE2018-87085Kun Chen, Prawesh Dahal, Mariam Avagyan, Kevin Huang,Trinity College, Hartford, CT, United States

2:27pm – Torch End-Effector and TIG Electrode ChangeoutDesign for a TIG Welding Robot Used in Metal Big AreaAdditive ManufacturingTechnical Paper Publication. IMECE2018-86726Christopher Masuo, Andrzej Nycz, Mark W. Noakes, OakRidge National Laboratory, Oak Ridge, TN, United States,Jared Bell, Justin Killian, Chandler Oakley, William Hamel,University of Tennessee, Knoxville, TN, United States

2:48pm – Welding Robotic Co-Worker Using BrainComputer InterfaceTechnical Paper Publication. IMECE2018-87503Yao Li, University of Illinois at Urbana-Champaign, Urbana, IL,United States, T. Kesavadas, University of Illinois Urbana-Champaign, Mahomet, IL, United States

3:09pm – Intelligent Decision Making Approach for PerformanceEvaluation of a Robot-Based Manufacturing CellTechnical Paper Publication. IMECE2018-86666Tavo Kangru, Tallinn University of Technology, Tallinn, Estonia,Jüri Riives, Innovative Manufacturing Engineering SystemsCompetence Centre, Tallinn, Estonia, Tauno Otto, MeelisPohlak, Kashif Mahmood, Tallinn University of Technology,Tallinn, Estonia

2-15 DIGITAL MANUFACTURINGSIMULATION AND VALIDATION2-15-2 Digital Manufacturing in Digital Twin AspectsThird Floor, David L. Lawrence Convention Center, Room 303

1:45pm–3:30pm

Session Chair: Germanico Gonzalez-Badillo, Universidad Autonoma De San Luis Potosi, Rioverde San Luis Potosi, Mexico

Session Co-Chairs: Kai He, Shenzhen Institutes of AdvancedTechnology, Chinese Academy of Sciences, China, Shenzhen,China, David Guerra-Zubiaga, Kennesaw State University,Marietta, GA, United States

1:45pm – Demonstration of an Industrial Framework for anImplementation of a Process Digital TwinTechnical Paper Publication. IMECE2018-87361J.M. Eyre, Advanced Manufacturing Research Centre,Sheffield, Yorkshire, United Kingdom, T.J. Dodd, University of Sheffield, Sheffield, United Kingdom, C. Freeman,R. Lanyon-Hogg, A.J. Lockwood, R.W. Scott, AdvancedManufacturing Research Centre, Sheffield, United Kingdom

2:06pm – Towards a Digital Twin for Cloud Manufacturing:Case StudyTechnical Paper Publication. IMECE2018-87688Diane Ngo, Kennesaw State University, Marietta, GA, UnitedStates, Reza Vatankhah-Barenji, Hacettepe University,Ankara, Turkey, Germanico Gonzalez-Badillo, UniversidadAutonoma de San Luis Potosi, Rioverde San Luis Potosi,Mexico, David Guerra-Zubiaga, Kennesaw State University,Marietta, GA, United States

2:27pm – Virtual Experimental Investigation for IndustrialRobotics in Gazebo EnvironmentTechnical Paper Publication. IMECE2018-87686Murat Aksu, Frederick Proctor, John Michaloski, The NationalInstitute of Standards and Technology, Gaithersburg, MD, UnitedStates

2:48pm – A Digital Twin Concept for ManufacturingSystemsTechnical Paper Publication. IMECE2018-87737Wesley Ellgass, Kennesaw State University, Kennesaw, GA,United States, Ali Vatankhah-Barenji, Guangdong Universityof Technology, Guangzhou, China, Hector S. Lemus, NathanHolt, Kennesaw State University, Kennesaw, GA, UnitedStates, Julian Richmond, Kennesaw State UniversityMarietta, GA, United States, Germanico Gonzalez-Badillo,Universidad Autonoma de San Luis Potosi, RioverPotosi, Mexico


13

3:09pm – Digital Twin Using Siemens PLCs and PLMSoftware: A Manufacturing Material System Case StudyTechnical Presentation. IMECE2018-87772David Guerra-Zubiaga, Steven Moser, Michael Fyfe,Kennesaw State University, Marietta, GA, United States,Sebastien Desarzens, Donato Laurent, Fribourg University,Fribourg, Switzerland

2-2 CONGRESS-WIDE SYMPOSIUM ONADDITIVE MANUFACTURING2-2-3 Congress-Wide Symposium on AdditiveManufacturing: Metals – Powder Bed Fusion IThird Floor, David L. Lawrence Convention Center, Room 301

3:45pm–5:09pm


Session Co-Chair: Nima Shamsaei, Auburn University,Auburn, AL, United States

3:45pm – Utilizing Advanced Manufacturing Technologiesto Develop a Reconfigurable Lumbar Puncture TrainingModelTechnical Paper Publication. IMECE2018-86851Besim Kalajdzic, University of Windsor, Windsor, ON, Canada,Ruth Jill Urbanic, University of Windsor, La Salle, ON,Canada, Andre Khayat, Anna Farias, University of Windsor,Windsor, ON, Canada

4:06pm – Porosity Analysis in Metal Additive Manufacturingby Micro-CTTechnical Paper Publication. IMECE2018-87897Subin Shrestha, Thomas Starr, Kevin Chou, University ofLouisville, Louisville, KY, United States

4:27pm – Comparison of Louvered Plate-Fin HeatExchangers Made via Additive ManufacturingTechnical Paper Publication. IMECE2018-87941Michael Bichnevicius, David Saltzman, Stephen Lynch,Pennsylvania State University, University Park, PA, UnitedStates

4:48pm – Optimize Additive Manufacturing Post-Build HeatTreatment and Hot Iso-Static Pressing Process Using anIntegrated Computational Materials EngineeringFrameworkTechnical Paper Publication. IMECE2018-88550Anahita Imanian, Kelvin Leung, Nagaraja Iyyer, TechnicalData Analysis, Falls Church, VA, United States, Derek H.Warner, Peipei Li, Cornell University, Ithaca, NY, United States

2-5 MANUFACTURING OF ATOMICALLY-THIN, TWO-DIMENSIONAL MATERIALS2-5-3 Synthesis and Processing of 2D MaterialsThird Floor, David L. Lawrence Convention Center, Room 304

3:45pm–5:30pm


Session Co-Chairs: SungWoo Nam, University of Illinois atUrbana-Champaign, Urbana, IL, United States, Mike Cai Wang,University of South Florida, Tampa, FL, United States

3:45pm – Electrochemical Polishing of Large Area Two-Dimensional Materials Grown by Physical Vapor TransportTechnical Presentation. IMECE2018-89854Amritanand Sebastian, Pennsylvania State University,University Park, PA, United States, Akhil Dodda, PennsylvaniaState University, State College, PA, United States, DanielSchulman, Pennsylvania State University, University Park, PA,United States, Saptarshi Das, Pennsylvania State University,State College, PA, United States

4:06pm – Strengthening and Toughening of Thin MetalLeaves by Graphene SynthesisTechnical Presentation. IMECE2018-89512Kaihao Zhang, Sameh Tawfick, University of Illinois at UrbanaChampaign, Urbana, IL, United States

4:27pm – Roll-to-Roll Plasma Chemical Vapor Depositionfor Scalable Nanomanufacturing of GrapheneTechnical Presentation. IMECE2018-86382Majed Alrefae, Purdue University, West Lafayette, IN, UnitedStates, Timothy Fisher, University of California, Los Angeles,Los Angeles, CA, United States

4:48pm – Large-Scale Dynamic Energy Driven Assembly ofTwo-Dimensional Layered Materials on Polymer SubstrateTechnical Presentation. IMECE2018-88881Dong Zhou, Bo Li, Villanova University, Villanova, PA, UnitedStates

5:09pm – Analysis of Multilayered Copper/Nickel/TitaniumDeposited Aluminum Alloys Using Electrochemical ProcessTechnical Presentation. IMECE2018-88889Mohammad Asaduzzaman Chowdhury, Dhaka University ofEngineering & Technology, Gazipur, Gazipur, Bangladesh,Bengir Ahmed Shuvho, Dhaka University of Engineering &Technology, Dhaka, Bangladesh, Uttam Kumar Debnath,Rajib Nandee, Dhaka University of Engineering & Technology,Gazipur, Gazipur, Gazipur, Bangladesh, Suman Das, Universityof Saskatchewan, Saskatchewan, SK, Canada, Mohi UddinAhmed, Dhaka University of Engineering & Technology,Gazipur, Bangladesh, Atiqur Rahman, Bangladesh RoadTransport Authority, Dhaka, Bangladesh


14

2-13 ROBOTICS & AUTOMATION INADVANCED MANUFACTURING2-13-3 Algorithms and OptimizationThird Floor, David L. Lawrence Convention Center, Room 302

3:45pm–5:30pm



3:45pm – Efficient Feedrate Optimization Method for SplineToolpath With Curvature-Base Planning and AccurateInterpolatingTechnical Paper Publication. IMECE2018-86162Yong Zhang, Mingyong Zhao, Peiqing Ye, Tsinghua, Beijing,China, Jiali Jiang, China University of Mining & Technology,Beijing, China, Hui Zhang, Tsinghua, Beijing, China

4:06pm – Adaptive Industrial Robots Using Machine VisionTechnical Paper Publication. IMECE2018-86720Vladimir Kuts, Tauno Otto, Toivo Tähemaa, KhuldoonBukhari, Tengiz Pataraia, Tallinn University of Technology,Tallinn, Harju, Estonia

4:27pm – A Collision-Free Motion Planning Approach forParallel Manipulator Assembly Based on Machine VisionTechnical Presentation. IMECE2018-88784Haodong Chen, Hefei University of Technology, Hefei, China,Zheng Guo, Shanghai Jiao Tong University, Shanghai, China,Yifan Wang, Ping Zhao, Hefei University of Technology, Hefei,China

4:48pm – Graphically Manipulating Procedurally GeneratedG-CodeTechnical Presentation. IMECE2018-89740Steven Patrick, Oak Ridge National Labratory, Knoxville, TN,United States, Andrzej Nycz, Mark W. Noakes, Oak RidgeNational Laboratory, Oak Ridge, TN, United States

5:09pm – Control of Continuous Polymer CompoundingFuse Filament ModelingTechnical Paper Publication. IMECE2018-87114Connor Armstrong, Thomas Carlacci, David Bigio,University of Maryland, College Park, MD, United States

2-14 LASER-BASED ADVANCEDMANUFACTURING AND MATERIALSPROCESSING2-14-2 Laser-Matter Interaction and Its Applicationsin Materials ProcessingThird Floor, David L. Lawrence Convention Center, Room 305

3:45pm–5:30pm

Session Chair: Leila Ladani, University of Texas at Arlington,Arlington, TX, United States

Session Co-Chair: Sriharsha Srinivas Sundarram, FairfieldUniversity, Fairfield, CT, United States

3:45pm – Multi-Physics Modeling of Laser Interaction WithSurface in Powder Bed Melting ProcessTechnical Paper Publication. IMECE2018-86566Faiyaz Ahsan, University of Texas at Arlington, Arlington, TX,United States, Jafar Razmi, University of Texas at Arlington,Fort Worth, TX, United States, Leila Ladani, University of Texasat Arlington, Arlington, TX, United States

4:06pm – Laser Triggered Alloying of Al-Shell/Ni-CoreEnergetic Nanoparticle: A Molecular Dynamics StudyTechnical Paper Publication. IMECE2018-86942Pengfei Ji, Mengzhe He, Yiming Rong, Southern Universityof Science and Technology, Shenzhen, Guangdong, China,Yuwen Zhang, University of Missouri, Columbia, MO, UnitedStates, Yong Tang, South China University of Technology,Guangzhou, Guangdong, China

4:27pm – Simulation and Characterization of 3D ShapeOptical Fiber Sensors Fabricated by Femtosecond LaserTechnical Presentation. IMECE2018-88130Seunghwan Jo, Hang-Eun Joe, Anmol Guram, Martin Jun,Purdue University, West Lafayette, IN, United States

4:48pm – Laser Foaming of Polyetherimide (PEI)Technical Paper Publication. IMECE2018-88623Sriharsha Srinivas Sundarram, Venkateshwarlu Kakumanu,Fairfield University, Fairfield, CT, United States

5:09pm – Synthesis of Molybdenum-Doped TiO2 by LaserAblation in Precursor SolutionTechnical Presentation. IMECE2018-89687Mustafa Mozael, Rutgers University, New Brunswick, NJ,United States, Stephen Tse, Bernard Kear, Rutgers, The StateUniversity of New Jersey, Piscataway, NJ, United States


15

2-15 DIGITAL MANUFACTURINGSIMULATION AND VALIDATION2-15-3 Digital Manufacturing in Industry 4.0 AspectsThird Floor, David L. Lawrence Convention Center, Room 303

3:45pm–5:30pm

Session Chair: Kai He, Shenzhen Institutes of AdvancedTechnology, Chinese Academy of Sciences, China, Shenzhen,China

Session Co-Chairs: Germanico Gonzalez-Badillo, UniversidadAutonoma de San Luis Potosi, Rioverde San Luis Potosi,Mexico, David Guerra-Zubiaga, Kennesaw State University,Marietta, GA, United States

3:45pm – Digital Factory: Simulation Enhancing Productionand Engineering ProcessTechnical Paper Publication. IMECE2018-88334Angella Thomas, John Cohran III, David Guerra-Zubiaga,Kennesaw State University, Marietta, GA, United States

4:06pm – A Novel Modeling Approach for Solving the CellFormation ProblemTechnical Paper Publication. IMECE2018-88128Taras Dmytryshyn, Mohamed Ismail, University of Regina,Regina, SK, Canada, Ola Rashwan, Pennsylvania StateUniversity, Middletown, PA, United States

4:27pm – Research on the Integrated Optimization for PathPlanning of Transfer Robots and Production Scheduling ofFlexible Job ShopsTechnical Presentation. IMECE2018-86759Xixing Li, Hubei University of Technology, Wuhan, Hubei,China, Baigang Du, Wuhan University of Technology, Wuhan,Hubei, China

4:48pm – Internet of Things in Manufacturing: An OverviewTechnical Paper Publication. IMECE2018-88262Hussam Alothman, Binghamton University, Johnston City, NY,United States, Mohammad Khasawneh, Nagen Nagarur,Binghamton University, Binghamton, NY, United States

5:09pm – AI Based Monitoring and Control of InjectionMolding Process for Consistent Product QualityTechnical Presentation. IMECE2018-89531Hong Seok Park, Saurabh Kumar, University of Ulsan, Ulsan,Korea (Republic)


2-2 CONGRESS-WIDE SYMPOSIUM ONADDITIVE MANUFACTURING2-2-4 Congress-Wide Symposium on AdditiveManufacturing: Metals – Powder Bed Fusion IIThird Floor, David L. Lawrence Convention Center, Room 301

8:55am–10:40am


Session Co-Chairs: Nima Shamsaei, Auburn University,Auburn, AL, United States, Albert To, University of Pittsburgh,Pittsburgh, PA, United States

8:55am – Mitigating Near-Surface Porosity in a LaserPowder Bed Fusion ProcessInvited Presentation. IMECE2018-89768Sneha Prabha Narra, Worcester Polytechnic Institute,Worcester, MA, United States, Luke Scime, Jack Beuth,Carnegie Mellon University, Pittsburgh, PA, United States

9:37am – Efficient Optimization of Build Orientation andSupport Structure Design for Laser Powder Bed AdditiveManufacturingTechnical Presentation. IMECE2018-89493Albert To, Lin Cheng, Qian Chen, Xuan Liang, University ofPittsburgh, Pittsburgh, PA, United States

9:58am – Microstructure Development After ThermalCycling by Adjacent Melt Pools in Ti-B AlloysTechnical Presentation. IMECE2018-89786Yining He, Jack Beuth, Bryan Webler, Nicholas Jones,Carnegie Mellon University, Pittsburgh, PA, United States

10:19am – Alloy Composition and Processing Changes toMitigate Melt Pool Balling Defects in Direct Metal AdditiveManufacturingTechnical Presentation. IMECE2018-89988Jack Beuth, Debomita Basu, Zachary Francis, NicholasJones, Bryan Webler, Carnegie Mellon University, Pittsburgh,PA, United States

2-4 NANOMANUFACTURING2-4-1 Nanomanufacturing: Spray or Print DepositionTechniques for Nanomaterials and NanostructuresThird Floor, David L. Lawrence Convention Center, Room 304

8:55am–10:40am

Session Chair: Matt Maschmann, University of Missouri,Columbia, MO, United States

Session Co-Chair: Chih-Hao Chang, North Carolina StateUniversity, Raleigh, NC, United States

8:55am – Harnessing the Versatility of Carbon Nanotubesas Printed Thin FilmsTechnical Presentation. IMECE2018-86495Aaron Franklin, Duke University

TRACK 2 ADVANCED MANUFACTURING – WEDNESDAY, NOVEMBER 14 / THURSDAY, NOVEMBER 15

16

9:16am – Obtaining Thickness-Limited ElectrosprayDeposition for 3D CoatingTechnical Presentation. IMECE2018-88299Lin Lei, Rutgers University, Piscataway, NJ, United States,Dylan Kovacevich, Rutgers University, Belle Mead, NJ, UnitedStates, Michael P. Nitzsche, Rutgers University, Piscataway,NJ, United States, Jihyun Ryu, Drexel University, Piscataway,NJ, United States, Kutaiba Al-Marzoki, Rutgers University,Piscataway, NJ, United States, Gabriela Rodriguez, CityUniversity of New York, Bronx, NY, United States, Lisa C.Klein, Rutgers University, Piscataway, NJ, United States,Andrei Jitianu, City University of New York, Bronx, NY, UnitedStates, Jonathan Singer, Rutgers University, Piscataway, NJ,United States

9:37am – Geometric Effects on 3D Coating by Self-LimitingElectrosprayTechnical Presentation. IMECE2018-89649Dylan Kovacevich, Rutgers University, Belle Mead, NJ, UnitedStates, Lin Lei, Jonathan Singer, Rutgers University,Piscataway, NJ, United States

9:58am – Modeling Electrosprays: Millions of ChargedDrops Evaporating, Fissioning, and Depositing on aSubstrateTechnical Presentation. IMECE2018-89841Marriner Merrill, US Naval Research Laboratory, Washington,DC, United States

2-6 ADVANCED MACHINING ANDFINISHING2-6-3 Assisted Machining TechniquesThird Floor, David L. Lawrence Convention Center, Room 305

8:55am–10:40am

Session Chair: Sathish Kannan, American University ofSharjah, Sharjah, United Arab Emir.

Session Co-Chair: Chang Ye, University of Akron, Peninsula,OH, United States

8:55am – A Numerical Study to Investigate the Influence ofEdge Preparation in Vibration Assisted MachiningTechnical Paper Publication. IMECE2018-87731Salman Pervaiz, Rochester Institute of Technology – DubaiCampus, Dubai, United Arab Emir., Sathish Kannan, AmericanUniversity of Sharjah, Sharjah, United Arab Emir., Wael Samad,Rochester Institute of Technology - Dubai Campus, Dubai,United Arab Emir.

9:16am – Improving the Fretting and Corrosion FatigueStrength of 300M Ultra-High Strength Steel Using theUltrasonic Surface Rolling ProcessTechnical Presentation. IMECE2018-89765Weidong Zhao, University of Akron, Akron, OH, United States,Chang Ye, University of Akron, Peninsula, OH, United States,Daoxin Liu, Xiaohua Zhang, Northwestern PolytechnicalUniversity, Xian, Shaanxi, China, Ruixia Zhang, Hao Zhang,University of Akron, Akron, OH, United States, Ying Zhou,INSA Rennes, Rennes, Bretagne, France

9:37am – Enhanced Plasticity for Metallic Glasses byElectropulsing-Assisted Surface Severe PlasticDeformationTechnical Presentation. IMECE2018-89780Chi Ma, University of Akron, Akron, OH, United States, SergeySuslov, Qatar Environment and Energy Research Institute,Doha, Qatar, Chang Ye, University of Akron, Peninsula, OH,United States, Yalin Dong, University of Akron, Akron, OH,United States

9:58am – The Effects of Electrically-Assisted UltrasonicNanocrystal Surface Modification on 3D-Printed Ti-6Al-4VAlloyTechnical Presentation. IMECE2018-89788Hao Zhang, Jingyi Zhao, Jun Liu, Haifeng Qin, ZhenchengRen, Gary Doll, University of Akron, Akron, OH, United States,Yalin Dong, University of Akron, Akron, OH, United States,Chang Ye, University of Akron, Peninsula, OH, United States

10:19am – Measuring Points Selection for Laser TrackerMeasurement of Five-Axis Machine ToolTechnical Paper Publication. IMECE2018-88314Qingzhao Li, Wei Wang, Hai Li, Jing Zhang, Zhong Jiang,University of Electronic Science and Technology of China,ChengDu, China

2-8 ADVANCED MATERIAL FORMING2-8-1 Novel ProcessesThird Floor, David L. Lawrence Convention Center, Room 302

8:55am–10:40am

Session Chair: William Emblom, University of Louisiana-Lafayette, Lafayette, LA, United States

Session Co-Chair: Ihab Ragai, Pennsylvania State University,Behrend College, Erie, PA, United States

8:55am – Friction Stir Back Extrusion: PreliminaryInvestigations on Through-Wall Characteristics for AL-1100-OTechnical Paper Publication. IMECE2018-86318William Emblom, Austin Menard, Clarissa Gallardo,University of Louisiana at Lafayette, Lafayette, LA, UnitedStates, Clayton Loehn, Louisiana State University, BatonRouge, LA, United States, Ayotunde Olayinka, University ofLouisiana at Lafayette, Lafayette, LA, United States, ScottWagner, Michigan Tech, Atlantic Mine, MI, United States,Muhammad Wahab, Louisiana State University, Baton Rouge,LA, United States, Daniel Seguin, Michigan TechnologicalUniversity, Houghton, MI, United States

9:16am – Effect of Process Parameters on the Electrically-Assisted Sintered Iron-Copper Powder MetalsTechnical Paper Publication. IMECE2018-86891Ihab Ragai, Matt Schwabenbauer, Pennsylvania StateUniversity, Behrend College, Erie, PA, United States,Seray Eser, Michael Müller, Rosenheim University of AppliedSciences, Rosenheim, Germany

TRACK 2 ADVANCED MANUFACTURING – THURSDAY, NOVEMBER 15

17

9:37am – Mechanical Response and Grain Size Effects inMicroscale Reverse Extrusion of CopperTechnical Presentation. IMECE2018-87996Bin Zhang, Yooseob Song, George Voyiadjis, Wen Meng,Louisiana State University, Baton Rouge, LA, United States,Kristian Juul, Kim L. Nielsen, Technical University ofDenmark, Kgs. Lyngby, Denmark

9:58am – Electroplasticity Behavior of Mg AZ31B SubjectedTo Electropulsing Assisted TensionTechnical Presentation. IMECE2018-89819Chang Ye, University of Akron, Peninsula, OH, United States,Zhencheng Ren, Jingyi Zhao, Jun Liu, Hao Zhang, YalinDong, University of Akron, Akron, OH, United States

10:19am – A Numerical Study on Rotational Tube FlaringProcessTechnical Paper Publication. IMECE2018-86918Chetan Nikhare, Pennsylvania State University, Erie, PA,United States

2-11 COMPUTATIONAL MODELING ANDSIMULATION FOR ADVANCEDMANUFACTURING2-11-1 Advanced Manufacturing Processes-Modelingand Simulation IThird Floor, David L. Lawrence Convention Center, Room 303

8:55am–10:40am

Session Chair: Virginia DeGiorgi, Naval Research Laboratory,Washington, DC, United States

Session Co-Chair: Yucheng Liu, Mississippi State University,Mississippi State, MS, United States

8:55am – Prediction of Residual Stress and Damage inThermal Spray Coatings Using Hybrid ComputationalApproachTechnical Paper Publication. IMECE2018-86504Abba Abubakar, Abul Fazal M. Arif, Khaled Al-Athel, SyedSohail Akhtar, King Fahad University of Petroleum & Minerals,Dhahran, Saudi Arabia

9:16am – Three-Dimensional Computational Modeling ofMicrostructure Defects in Thermal Barrier CoatingsTechnical Presentation. IMECE2018-88983Stephanie Wimmer, Virginia DeGiorgi, Naval ResearchLaboratory, Washington, DC, United States, John Drazin,ASEE, Washington, DC, United States, Edward Gorzkowski,Naval Research Laboratory, Washington, DC, United States

9:37am – Modeling and Experimental Verification of Torqueand Thrust Forces Generated by the Conventional Drill’sChisel EdgeTechnical Paper Publication. IMECE2018-86155Charbel Seif, American University of Beirut, Beirut, Lebanon,Ilige Hage, Notre Dame University-Louaize, Zouk Mosbeh,Lebanon, Ramsey Hamade, American University of Beirut,Beirut, Riad El Solh, Lebanon

9:58am – Statistically Validated and Optimized Tabu SearchEstimation of Cutting Tool Life in TurningTechnical Paper Publication. IMECE2018-86232Remi Hage, Ilige Hage, Chady Ghnatios, Notre DameUniversity-Louaize, Zouk Mosbeh, Lebanon, RamseyHamade, American University of Beirut, Beirut, Riad El Solh,Lebanon

10:19am – Flexible Fiber Motion in Fiber-ReinforcedComposite Material ProcessingTechnical Paper Publication. IMECE2018-86440Diwei Zhang, Prairie View A&M University, Cypress, TX, UnitedStates, Xiaobo Peng, Dongdong Zhang, Prairie View A&MUniversity, Prairie View, TX, United States

2-12 VARIATION SIMULATION ANDDESIGN FOR ASSEMBLY2-12-1 Variation Simulation and Design forAssembly IFourth Floor, David L. Lawrence Convention Center, Room 402

8:55am–10:40am

Session Chair: Kristina Wärmefjord, Chalmers University ofTechnology, Gothenburg, Sweden

Session Co-Chair: Hua Wang, Shanghai Jiao Tong University,Shanghai, China

8:55am – Geometry Assurance in a Digitally ConnectedEnvironmentTechnical Presentation. IMECE2018-89239Rikard Söderberg, Chalmers University of Technology,Gothenburg, Sweden

9:37am – Part Variation Simulations: An Industrial CaseStudy With an Experimental ValidationTechnical Paper Publication. IMECE2018-87329Narendra Akhadkar, Schneider Electric Industries SAS,Grenoble, France, Silvestre Cano, Schneider Electric,Apodaca, Mexico, Alain Van Hoecke, Jean Marie Maldjian,Christophe Gourru, Schneider Electric Industries SAS,Grenoble, France

9:58am – Convex Optimization Techniques as Applied toSimulation of Compliant AssemblyTechnical Presentation. IMECE2018-88963Maria Stefanova, Boris Grigoriev, Margarita Petukhova,Sergey Lupuleac, Stanislav Baklanov, Olga Minewitsch,Peter the Great St. Petersburg Polytechnic University, SaintPetersburg, Russia

10:19am – Tolerance Allocation With Simulation-BasedDigital Twin for CFRP-Metal Countersunk Bolt JointTechnical Paper Publication. IMECE2018-86645Hua Wang, Mengqian Zhou, Shanghai Jiao Tong University,Shanghai, China, Bo Liu, Chongqing Changan Automobile Co.,Ltd., Oushang Automobile Institute, Chongqing, China


18

2-2 CONGRESS-WIDE SYMPOSIUM ONADDITIVE MANUFACTURING2-2-5 Congress-Wide Symposium on AdditiveManufacturing: Polymers IThird Floor, David L. Lawrence Convention Center, Room 301

10:50am–12:35pm

Session Chair: Mehran Tehrani, University of New Mexico,Albuquerque, NM, United States

Session Co-Chairs: Junghoon Yeom, Michigan StateUniversity, East Lansing, MI, United States, Heather Lai, SUNYNew Paltz, New Paltz, NY, United States

10:50am – Direct and Converse Piezoelectric Behavior ofThree-Dimensionally Printed Polymer Without Filler orPolingTechnical Presentation. IMECE2018-86014Patatri Chakraborty, Chi Zhou, Deborah D.L. Chung,University at Buffalo, State University of New York, Buffalo, NY,United States

11:11am – In-Plane Molecular Alignment in 3D-PrintedPolymers Due to Printing-Process-Induced Shear StressTechnical Presentation. IMECE2018-86015Patatri Chakraborty, Naga B. Gundrati, Chi Zhou, ChongCheng, Deborah D.L. Chung, University at Buffalo, StateUniversity of New York, Buffalo, NY, United States

11:32am – Influence of the Weak Interfaces on the FractureToughness of 3D Printed PolymersTechnical Presentation. IMECE2018-86508L. Roy Xu, Mehran Tehrani, University of New Mexico,Albuquerque, NM, United States

11:53am – Effect of Process Parameters on CompressiveProperties of ULTEM 9085 Produced by FDM ProcessTechnical Paper Publication. IMECE2018-87523Aboma Wagari Gebisa, Hirpa G. Lemu, University ofStavanger, Stavanger, Rogaland, Norway

12:14pm – Fully Resolved Simulations of AdditiveManufacturing ProcessesTechnical Presentation. IMECE2018-87850Gretar Tryggvason, Huanxiong Xia, Jiacai Lu, Johns HopkinsUniversity, Baltimore, MD, United States

2-4 NANOMANUFACTURING2-4-2 Nanomanufacturing: Nanomaterials Synthesisand AssemblyThird Floor, David L. Lawrence Convention Center, Room 304

10:50am–12:35pm

Session Chair: Dimitry Papkov, University of Nebraska–Lincoln, Lincoln, NE, United States

Session Co-Chair: Matt Maschmann, University of Missouri,Columbia, MO, United States

10:50am – Numerical Investigation of Internal ForcesDuring Carbon Nanotube Forest Self-AssemblyTechnical Paper Publication. IMECE2018-86567Taher Hajilounezhad, Matt Maschmann, University ofMissouri-Columbia, Columbia, MO, United States

11:11am – Stochastic Growth of Tall Carbon NanotubeForest Using Rapid Thermal Chemical Vapor DepositionTechnical Presentation. IMECE2018-87644Jaegeun Lee, Moataz Abdulhafez, Mostafa Bedewy,University of Pittsburgh, Pittsburgh, PA, United States

11:32am – 3D Carbon Nanotube Microstructures FromMulti-Stage Chemical Vapor DepositionTechnical Presentation. IMECE2018-87840Ryan Hines, Matt Maschmann, University of Missouri-Columbia, Columbia, MO, United States, Cole Love-Baker,University of South Carolina, Columbia, SC, United States

11:53am – Focused Laser Dewetting of Gold Nanofilms andLaser Induced Localized Physical Vapor DepositionTechnical Presentation. IMECE2018-88208Jonathan Singer, Tiaxing Ma, Rutgers University, Piscataway,NJ, United States

12:14pm – 3D Compatible Sacrificial NanoimprintLithography for Tuning the Wettability of ThermoplasticMaterialsTechnical Presentation. IMECE2018-89823Molla Hasan, Jonathan Singer, Imrhankhan Shahjahan,Rutgers University, Piscataway, NJ, United States


19

2-6 ADVANCED MACHINING ANDFINISHING2-6-4 Nontraditional Machnining ProcessesThird Floor, David L. Lawrence Convention Center, Room 305

10:50am–12:35pm

Session Chair: Guha Manogharan, Pennsylvania StateUniversity, University Park, PA, United States

Session Co-Chair: Yang Guo, Michigan State University, EastLansing, MI, United States

10:50am – A Comparison of the Effects of Wire ElectricalDischarge Machining Parameters on the Processing ofTraditionally Manufactured and Additively Manufactured316L Stainless Steel SpecimensTechnical Paper Publication. IMECE2018-88014Gregory Bicknell, Pennsylvania State University, StateCollege, PA, United States, Guha Prasanna Manogharan,Pennsylvania State University, Boardman, OH, United States

11:11am – Experimental Study on Machining of HybridComposite Stacks Using Submerged Abrasive WaterjetMachining ProcessTechnical Paper Publication. IMECE2018-88179Sagil James, Mayur Sunil Narkhede, California StateUniversity Fullerton, Fullerton, CA, United States

11:32am – Methodology for the Control of the Volume ofMaterial Removal in the Plateau Honing ProcessTechnical Presentation. IMECE2018-88745Milton Fabian Coba-Salcedo, Universidad del Atlantico,Barranquilla, Colombia, Irene Buj-Corral, Joan Vivancos-Calvet, Universitat Politècnica de Catalunya, Barcelona, Spain

11:53am – Estimation of Machine Vision Parameters ofSurface Roughness and Wire Wear in Wire EDM of Al-8%Si3N4 Metal Matrix Composite Material UsingArtificial Neural NetworkTechnical Presentation. IMECE2018-89478Gurupavan H.R., Ravindra Holalu Venkatadas, DevegowdaT.M., P.E.S College of Engineering, Mandya, India

12:14pm – Geometric Tolerances Evaluation in HydrostaticRotary TableTechnical Presentation. IMECE2018-88986Jun Zha, Hangcheng Zhang, Yipeng Li, Yaolong Chen, Xi’an Jiaotong University, Xi’an, China

2-8 ADVANCED MATERIAL FORMING2-8-2 Formability-IThird Floor, David L. Lawrence Convention Center, Room 302

10:50am–12:35pm

Session Chair: Chetan Nikhare, Pennsylvania State University,Erie, PA, United States

Session Co-Chair: William Emblom, University of Louisiana-Lafayette, Lafayette, LA, United States

10:50am – Technology Development and Tool Concepts forHigh-Temperature Forming of TitaniumTechnical Paper Publication. IMECE2018-86660Frank Schieck, Fraunhofer Institute for Machine Tools &Forming Tech IWU, Chemnitz, Germany, Dirk Landgrebe,Matthias Demmler, Andre Albert, Fraunhofer IWU, Chemnitz,Germany, Martin Weber, Fraunhofer IST, Braunschweig,Germany

11:11am – The Effect of Local Force Control on PunchForces During Panel FormingTechnical Paper Publication. IMECE2018-86030William Emblom, University of Louisiana-Lafayette, Lafayette,LA, United States

11:32am – Tube Buckling: An Advantage to Tube ShapingTechnical Paper Publication. IMECE2018-86910Chetan Nikhare, Pennsylvania State University, Erie, PA,United States

11:53am – Determination of Thermal Parameters of a Work-Roll in Warm Rolling Using Inverse ModelingTechnical Paper Publication. IMECE2018-86106Vinod Yadav, North Eastern Regional Institute of Science &Technology, Nirjuli, Arunachal Pradesh, India

12:14pm – Effect of Pre-Bending on Formability of DQ Steeland Al 5182Technical Paper Publication. IMECE2018-87321Shabbir Memon, Hamid Lankarani, Obaidur RahmanMohammed, Wichita State University, Wichita, KS, UnitedStates


20

2-11 COMPUTATIONAL MODELING ANDSIMULATION FOR ADVANCEDMANUFACTURING2-11-2 Advanced Manufacturing Processes-Modelingand Simulation IIThird Floor, David L. Lawrence Convention Center, Room 303

10:50am–12:35pm

Session Chair: Muhammad Jahan, Miami University, Oxford,OH, United States


10:50am – Finite Element Simulation of Backward MicroExtrusion for Annealed CopperTechnical Paper Publication. IMECE2018-86755Md. Mosleh Uddin, Debabrata Mondal, Paul D. Herrington,University of New Orleans, New Orleans, LA, United States

11:11am – Effect of Size Distribution on Optical AbsorptionDuring Intense Pulsed Light Sintering of MetalNanoparticlesTechnical Paper Publication. IMECE2018-87038Harish Devaraj, Hyun-Jun Hwang, Rajiv Malhotra, Rutgers,The State University of New Jersey, Piscataway, NJ, UnitedStates

11:32am – Numerical Modeling of a Pure Water JetMachining of Ti-6Al-4V and Al 6061-T6 Using ABAQUS andSmoothed Particle HydrodynamicsTechnical Paper Publication. IMECE2018-87271Greg Pasken, Jianfeng Ma, Mark McQuilling, Saint LouisUniversity, Saint Louis, MO, United States, MuhammadJahan, Miami University, Oxford, OH, United States

11:53am – FEM Investigation of Phase Transformation inVibration Assisted Nano Impact Machining by LooseAbrasives (VANILA)Technical Paper Publication. IMECE2018-87274Nick Duong, Jianfeng Ma, Saint Louis University, Saint Louis,MO, United States, Muhammad Jahan, Miami University,Oxford, OH, United States, Shuting Lei, Kansas StateUniversity, Manhattan, KS, United States, Murali Sundaram,University of Cincinnati, Cincinnati, OH, United States

12:14pm – Cohesive Zone Modeling for Transfer Printing ofThin FilmsTechnical Presentation. IMECE2018-89426Shruti Jain, Roger Bonnecaze, Kenneth Liechti, University ofTexas at Austin, Austin, TX, United States

2-12 VARIATION SIMULATION ANDDESIGN FOR ASSEMBLY2-12-2 Variation Simulation and Design forAssembly IIFourth Floor, David L. Lawrence Convention Center, Room 402

10:50am–12:35pm

Session Chair: Hua Wang, Shanghai Jiao Tong University,Shanghai, China

Session Co-Chair: Kristina Wärmefjord, Chalmers Universityof Technology, Gothenburg, Sweden

10:50am – Efficient Variation Simulation of Spot-WeldedAssembliesTechnical Paper Publication. IMECE2018-87454Samuel Lorin, Fraunhofer Chalmers Centre, Gothenburg,Sweden, Björn Lindau, Roham Sadeghi Tabar, LarsLindkvist, Kristina Wärmefjord, Rikard Söderberg, ChalmersUniversity of Technology, Gothenburg, Sweden

11:11am – Simulation and Optimization of AirframeAssembly ProcessTechnical Paper Publication. IMECE2018-87058Sergey Lupuleac, Nadezhda Zaitseva, Maria Stefanova,Sergey Berezin, Julia Shinder, Margarita Petukhova, Peterthe Great St. Petersburg Polytechnic University, St. Petersburg,Russia, Elodie Bonhomme, Airbus SAS, Toulose, France

11:32am – Influence of Selective Laser Heat TreatmentPattern Position on Geometrical VariationTechnical Paper Publication. IMECE2018-86164Vaishak Ramesh Sagar, Kristina Wärmefjord, RikardSöderberg, Chalmers University of Technology, Gothenburg,Vastra Gotland, Sweden

11:53am – CAD-Based Tolerance Analysis in PreliminaryDesign Stages Enabling Early Tolerance EvaluationTechnical Paper Publication. IMECE2018-86396Stefan Goetz, Benjamin Schleich, Sandro Wartzack,Friedrich-Alexander-University Erlangen-Nürnberg, Erlangen,Germany

12:14pm – Compliant Variation Analysis for High-SpeedTrain With Consideration of Welding DistortionTechnical Paper Publication. IMECE2018-86619Tao Liu, Shanghai Jiao Tong University, Shanghai, China,Yongjun Li, Baowang Li, CRRC Tangshan Co., Ltd.,Tangshan, China, Zhimin Li, Limin Yao, Sun Jin, ShanghaiJiao Tong University, Shanghai, China


21

2-2 CONGRESS-WIDE SYMPOSIUM ONADDITIVE MANUFACTURING2-2-6 Congress-Wide Symposium on AdditiveManufacturing: Polymers IIThird Floor, David L. Lawrence Convention Center, Room 301

2:05pm–3:50pm


Session Co-Chair: Deborah D.L. Chung, University at Buffalo,State University of New York, Buffalo, NY, United States

2:05pm – Optimization of Design Process of FusedFilament Fabrication (FFF) 3D PrintingTechnical Paper Publication. IMECE2018-87916Jaeyoon Kim, Bruce Kang, West Virginia University,Morgantown, WV, United States

2:26pm – Mechanical Behavior of Octahedral and OctetStructures Produced From CLIP TechnologyTechnical Paper Publication. IMECE2018-88192Anil Saigal, Tufts University, Medford, MA, United States, Gian Calise, Tufts University, Cranston, RI, United States

2:47pm – Flexible Strain Sensor Using AdditiveManufacturing and Conductive Liquid Metal: Design,Fabrication, and CharacterizationTechnical Paper Publication. IMECE2018-88753Austin Smith, Hamzeh Bardaweel, Louisiana Tech University,Ruston, LA, United States

3:08pm – Novel Ink for Ambient Condition Printing of LiquidCrystal Elastomers for 4D PrintingTechnical Presentation. IMECE2018-88768Devin Roach, Devin J. Roach, H. Jerry Qi, Craig Hamel,Georgia Institute of Technology, Atlanta, GA, United States

3:29pm – Rapid Multi-Material 3D Printing With ProjectionMicro-Stereolithography Using an Enclosed PrintingChamber and a PumpTechnical Presentation. IMECE2018-89396Daehoon Han, Howon Lee, Rutgers, The State University ofNew Jersey, Piscataway, NJ, United States

2-4 NANOMANUFACTURING2-4-3 Nanomanufacturing: Integration of NanoscaleMaterials orTextures for Enhanced PerformanceThird Floor, David L. Lawrence Convention Center, Room 304

2:05pm–3:50pm

Session Chair: Chih-Hao Chang, North Carolina StateUniversity, Raleigh, NC, United States

Session Co-Chair: Dimitry Papkov, University of Nebraska–Lincoln, Lincoln, NE, United States

2:05pm – Advanced Nanomanufacturing and Hard-SoftMaterials Integration for Smart and ConnectedBioelectronicsTechnical Presentation. IMECE2018-86294Woon-Hong Yeo, Yun-Soung Kim, Georgia Institute ofTechnology, Atlanta, GA, United States

2:26pm – Regenerated Silk Fibroin Films With Reduced-Sheet Content by Microwave Processing and CarbonNanotube IncorporationTechnical Presentation. IMECE2018-87653Se Youn Cho, Moataz Abdulhafez, Mostafa Bedewy,University of Pittsburgh, Pittsburgh, PA, United States

2:47pm – Systematic Analysis of Pattern Precision andUniformity in Roll-to-Roll Colloidal Assembly SystemTechnical Presentation. IMECE2018-86895I-Te Chen, Elizabeth Schappell, Xiaolong Zhang, Chih-HaoChang, North Carolina State University, Raleigh, NC, UnitedStates

3:08pm – Modification of Structure and MechanicalBehavior of Continuous Nanofibers Through Addition ofSmall Amounts of NanoinclusionsTechnical Presentation. IMECE2018-89822Dimitry Papkov, Mohammad N. Andalib, Yuris Dzenis,University of Nebraska - Lincoln, Lincoln, NE, United States

2-6 ADVANCED MACHINING ANDFINISHING2-6-5 Machinability of Engineering MaterialsThird Floor, David L. Lawrence Convention Center, Room 305

2:05pm–3:50pm

Session Chair: Sathish Kannan, American University ofSharjah, Sharjah, United Arab Emir.

Session Co-Chair: Derek Yip-Hoi, Western WashingtonUniversity, Bellingham, WA, United States

2:05pm – Effect of Rake Angle and Feed Rate on theSurface Quality While Turning In Situ TiB2/7050 Al MetalMatrix CompositesTechnical Paper Publication. IMECE2018-87399Kunyang Lin, Wenhu Wang, Ruisong Jiang, Yifeng Xiong,Northwestern Ploytechnical University, Xi’an, Shaanxi, China


22

2:26pm – An Experimental Investigation of Inclined HoleDrilling for CFRP Under Various Lubrication TechniquesTechnical Paper Publication. IMECE2018-87550Sathish Kannan, American University of Sharjah, Sharjah,United Arab Emir., Salman Pervaiz, Abhishek Ghoshal,Rochester Institute of Technology - Dubai Campus, Dubai,Dubai, United Arab Emir.

2:47pm – Investigation and Modeling of Flag Generation inHoneycomb Sandwich Panel MachiningTechnical Paper Publication. IMECE2018-87706Derek Yip-Hoi, David Gill, Western Washington University,Bellingham, WA, United States

3:08pm – Delamination Area Prediction During MillingCarbon Fiber Reinforced Polymer Composites Based onFiber Cutting Process Geometry Simulation SoftwareTechnical Presentation. IMECE2018-87851Xingyu Fu, Kyeongeun Song, Purdue University, WestLafayette, IN, United States, Gyuho Kim, Byung-Kwon Min,Yonsei University, Seoul, Korea (Republic), Martin Jun, Purdue University, West Lafayette, IN, United States

3:29pm – Comparative Assessment of DelaminationControl Techniques in Machining of CFRPTechnical Presentation. IMECE2018-88901Kamlesh Phapale, Bharat Forge Ltd., Pune, Maharashtra,India

2-7 THIRD SYMPOSIUM ON FASTENINGAND JOINING TECHNOLOGY2-7-2 Welding Performance Evaluation andSimulationFourth Floor, David L. Lawrence Convention Center, Room 401

2:05pm–3:50pm

Session Chair: Thomas Whitney, University of Dayton, Dayton,OH, United States

Session Co-Chair: Sayed Nassar, Oakland University,Rochester, MI, United States

2:05pm – Numerical Investigation on the Effect of PintoolRotational Speed on the Coulomb and the ModifiedCoulomb Friction Model of Friction-Stir-Welding (FSW)Technical Presentation. IMECE2018-86673Saad Aziz, Louisiana State University, Baton Rouge, LA,United States, Washim Dewan, DUET, Gazipur, Dhaka,Bangladesh, Daniel Huggett, Louisiana State University,Ponchatoula, LA, United States, Muhammad Wahab, AymanOkeil, Warren Liao, Louisiana State University, Baton Rouge,LA, United States

2:26pm – Improvement of Joint Integrity in MIG WeldedSteel: A ReviewTechnical Paper Publication. IMECE2018-86788Timothy Odiaka, Nkosinathi Madushele, Stephen Akinlabi,University of Johannesburg, Johannesburg, Gauteng, SouthAfrica

2:47pm – Estimation and Comparison of WeldingPerformances Using MRA and GMDH in P-GMAW for SS316L MaterialTechnical Paper Publication. IMECE2018-88604Rudreshi Addamani, Ravindra Holalu Venkatadas, P E SCollege of Engineering, Mandya, Karnataka, India, UgrasenGonchikar, BMSC College of Engineering, Bangalore,Karnataka, India, Chethan Y.D., M I T Mysuru, Karnataka,Mandya, India

3:08pm – Mathematical Model to Predict Tensile Strengthof Underwater Friction Stir Welded (UFSW) on 5052Aluminium AlloysTechnical Paper Publication. IMECE2018-88610Srinivasa Rao Pedapati, Universiti Teknologi Petronas, PerakDarul Ridzuan, Perak, Malaysia, Dhanis Paramaguru,Mokhtar Awang, Hamed Mohebbi, Universiti TeknologiPetronas, Seri Iskandar, Perak, Malaysia

3:29pm – Improving the Heat Dissipation From a PressureWheel of a Laser Robotic End-of-Arm Tooling UsingDifferent Geometrical Designs and MaterialsTechnical Paper Publication. IMECE2018-86880Abdallah Hamieh, Lawrence Technological University,Southfield, MI, United States, Badih Jawad, LawrenceTechnological University, Dearborn Heights, MI, United States,Liping Liu, Vernon Fernandez, Lawrence TechnologicalUniversity, Southfield, MI, United States, Mike Kheirallah,Advanced Safety and Energy, Flint, MI, United States

2-8 ADVANCED MATERIAL FORMING2-8-3 Formability – IIThird Floor, David L. Lawrence Convention Center, Room 302

2:05pm–3:50pm

Session Chair: Chetan Nikhare, Pennsylvania State University,Erie, PA, United States

Session Co-Chair: Scott Wagner, Michigan Tech, AtlanticMine, MI, United States

2:05pm – A New Incremental Bending System to FormCurved Metal Plate by Experiment and Finite ElementSimulationTechnical Paper Publication. IMECE2018-86800Xiaobing Dang, Chinese University of Hong Kong, Hong Kong,Hong Kong, Kai He, Shenzhen Institutes of AdvancedTechnology, Chinese Academy of Sciences, China, Shenzhen,China, Feifei Zhang, Shenzhen Institutes of AdvancedTechnology, Shenzhen, P.R.China, China, Qiyang Zuo,Shenzhen Institutes of Advanced Technology, ChineseAcademy of Sciences, China, Shenzhen, China, Ruxu Du,Chinese University of Hong Kong, Hong Kong, Hong Kong

2:26pm – Utilization of Wavy Toolpath in Single-PointIncremental FormingTechnical Paper Publication. IMECE2018-86885Tyler Grimm, Ihab Ragai, John Roth, Pennsylvania StateUniversity, Behrend College, Erie, PA, United States


23

2:47pm – Development of Processing Map for SuperplasticDeformation of Ti-6Al-4V AlloyTechnical Paper Publication. IMECE2018-88631Abdul Wahed Mohd, Amit Kumar Gupta, Nitin Kotkunde,BITS Pilani Hyderabad Campus, Hyderabad, Telangana, India,Swadesh Kumar Singh, GRIET, Hyderabad, India

3:08pm – Effect of Preform During Low Pressure TubeHydroformingTechnical Paper Publication. IMECE2018-86090Ashley Trott, Chetan Nikhare, Pennsylvania State University,Erie, PA, United States

2-9 INNOVATIVE PRODUCT DESIGN2-9-1 Innovative Product Design IFourth Floor, David L. Lawrence Convention Center, Room 402

2:05pm–3:50pm

Session Chair: Ricardo Jardim-Goncalves, Universidade Novade Lisboa, Caparica, Portugal

Session Co-Chair: Siddharthsinh Jadeja, Aditya Silver OakInstitute of Technology, Rajkot Gujarat, India

2:05pm – The Design and Study of the Tensioned WholeCouplingTechnical Paper Publication. IMECE2018-86458Yaohui Li, A’ni Luo, Heping Liu, Harbin EngineeringUniversity, Harbin, China

2:26pm – Improve Enterprise Resources ManagementThrough the Usage of IoT in the ShopfloorTechnical Paper Publication. IMECE2018-87589Adriana Cunha, TecMinho/University of Minho, Guimarães,Portugal, Joao Silva, Universidade do Minho, Guimaraes,Portugal

2:47pm – Design of Damped Structures to IncreaseMachine Tool Dynamical PerformanceTechnical Paper Publication. IMECE2018-87912Francesco Aggogeri, Nicola Pellegrini, University of Brescia,Brescia, Lombardia, Italy, Angelo Merlo, CeSI, ColognoMonzese (MI), Italy, Alberto Borboni, Riccardo Adamini,Claudio Taesi, University of Brescia, Brescia, Lombardia, Italy

3:08pm – A Future Trend in Sensing Enterprise SystemsTechnical Paper Publication. IMECE2018-88530Majid Zamiri, Andreia Artifice, Elsa Marcelino-Jesus, Joao Sarraipa, Ricardo Jardim-Goncalves, UniversidadeNova De Lisboa, Caparica, Portugal

3:29pm – Improve Product Profitability While AcceleratingTime to MarketTechnical Presentation. IMECE2018-88732Stephanie Feraday, aPriori, Concord, MA, United States

2-11 COMPUTATIONAL MODELING ANDSIMULATION FOR ADVANCEDMANUFACTURING2-11-3 Advanced Manufacturing Processes-Modelingand Simulation IIIThird Floor, David L. Lawrence Convention Center, Room 303

2:05pm–3:50pm

Session Chair: Jose Teixeira, University of Minho, Guimaraes,Portugal


2:05pm – A Study on Evolution of Splat Radius andTemperature in Thermal Spray ProcessTechnical Paper Publication. IMECE2018-87303Manpreet Dash, Sangharsh Kumar, Partha P. Bandyopadhyay,Anandaroop Bhattacharya, Indian Institute of TechnologyKharagpur, Kharagpur, West Bengal, India

2:26pm – A Numerical Study of Solder Paste RollingProcess for PCB PrintingTechnical Paper Publication. IMECE2018-88035Ricardo Oliveira, Nelson Rodrigues, Jose Teixeira,University of Minho, Guimaraes, Portugal, Duarte Santos,Bosch Car Multimedia SA, Braga, Portugal, Delfim Soares,University of Minho, Guimaraes, Portugal, Maria Cerqueira,Physics Department, Braga, Portugal, Senhorinha Teixeira,University of Minho, Guimaraes, Portugal

2:47pm – Numerical and Experimental Characterization ofKerf Formation in Abrasive Waterjet MachiningTechnical Paper Publication. IMECE2018-88617Joseck Nyaporo Nyaboro, Egypt-Japan University of Scienceand Technology, New Borg Al Arab, Egypt, Mahmoud Ahmed,Assiut University, Assiut, Egypt, Hassan El-Hofy, Egypt-JapanUniversity of Science and Technology, New Borg Al Arab,Egypt, Mohamed El-Hofy, Advanced Manufacturing ResearchCentre with Boeing, University of Sheffield, Willis Way,Rotherm, United Kingdom

3:08pm – Multiphysics Modeling and Parametric Analysis ofan Inductor for Heating Thin Sheet MaterialsTechnical Paper Publication. IMECE2018-88676Alex Mazursky, Miami University, Oxford, OH, United States,Hee-Chang Park, Sung-Hyuk Song, Korea Institute ofMachinery and Materials, Daejeon, Korea (Republic), Jeong-Hoi Koo, Miami University, Oxford, OH, United States

3:29pm – Backpropagation Artificial Neural NetworkMethod for the Prediction of Nanostructured WaspaloyUnder Cryogenic and Hot DeformationTechnical Presentation. IMECE2018-88918Harrison Onovo, David Esezobor, Muideen Bodude,Adeyanju Sosimi, University of Lagos, Lagos, Nigeria


24

2-2 CONGRESS-WIDE SYMPOSIUM ONADDITIVE MANUFACTURING2-2-7 Congress-Wide Symposium on AdditiveManufacturing: Composites/Ceramics & Bio-ApplicationsThird Floor, David L. Lawrence Convention Center, Room 301

4:00pm–5:45pm


Session Co-Chairs: Gretar Tryggvason, Johns HopkinsUniversity, Baltimore, MD, United States, Scott Thompson,Auburn University, Auburn, AL, United States

4:00pm – Dynamic Behavior of Biologically Inspired 3DPrinted Visco-Elastic Heterogeneous StructuresTechnical Paper Publication. IMECE2018-87845Heather Lai, Jennifer Beahan, SUNY New Paltz, New Paltz,NY, United States

4:21pm – Additively Manufactured, Design OptimizedComposites for LightweightingTechnical Presentation. IMECE2018-88037Nekoda Van De Werken, Pouria Khanbolouki, University ofNew Mexico, Albuquerque, NM, United States, Chitrang Patel,Ali Tamijani, Embry-Riddle Aeronautical University, DaytonaBeach, FL, United States, Mehran Tehrani, University of NewMexico, Albuquerque, NM, United States

4:42pm – Direct Ink Writing of Graphene Oxide ReinforcedPDMS Matrix Composites for Improved MechanicalPropertiesTechnical Paper Publication. IMECE2018-88052Chao Liu, Junjun Ding, Alfred University, Alfred, NY, UnitedStates, Li Jiang, Tuskegee University, Tuskegee, AL, UnitedStates

5:03pm – Conformal 3D Printing of Tire Tread Using GroundTire Rubber (GTR) CompositesTechnical Presentation. IMECE2018-89615Faez Alkadi, Jae-Won Choi, University of Akron, Akron, OH,United States

5:24pm – Optimizing Process Parameters to Binder JetCeramicsTechnical Presentation. IMECE2018-89844Edgar Mendoza, Daming Ding, B. Reeja-Jayan, Jack Beuth,Carnegie Mellon University, Pittsburgh, PA, United States

2-6 ADVANCED MACHINING ANDFINISHING2-6-6 Cutting Tool Performance and TreatmentThird Floor, David L. Lawrence Convention Center, Room 305

4:00pm–5:24pm

Session Chair: Muhammad Jahan, Miami University, Oxford,OH, United States

Session Co-Chair: Ihab Ragai, Pennsylvania State University,Behrend College, Erie, PA, United States

4:00pm – Studies on Cryogenic Treated Drills Under Nano-Fluid Based Reduced Quantity Lubrication Conditions forMachining Ti6Al4VTechnical Paper Publication. IMECE2018-86941D. Samuel Raj, Aarthi Kumaran, Jerome Arul Praveen.C,Anna University, Chennai, Tamil Nadu, India

4:21pm – Acoustic Signal Analysis for Prediction of FlankWear During Conventional MillingTechnical Paper Publication. IMECE2018-86886Travis Roney, Anthony Bauccio, Derek Shaffer, PaigeLorson, Ihab Ragai, David Loker, Pennsylvania StateUniversity, Behrend College, Erie, PA, United States, ChetanNikhare, Pennsylvania State University, Erie, PA, United States

4:42pm – Investigating the Effect of Tool Coating on CuttingForces and Tool Wear During Micro-Milling ofPolycarbonate GlassTechnical Paper Publication. IMECE2018-87441Craig Hanson, Miami University, Oxford, OH, United States,Xingbang Chen, Saint Louis University, St. Louis, MO, UnitedStates, Muhammad Jahan, Miami University, Oxford, OH,United States, Jianfeng Ma, Saint Louis University, St. Louis,MO, United States, Gregory K. Arbuckle, Western KentuckyUniversity, Bowling Green, KY, United States

5:03pm – Experimental and Theoretical Investigations onTool Wear and Surface Quality in Micro Milling of SiCp/AlComposites Under Dry and MQL ConditionsTechnical Paper Publication. IMECE2018-86071Ben Deng, Hao Wei Wang, Fang Yu Peng, Rong Yan, LinZhou, Huazhong University of Science and Technology,Wuhan, China


25

2-7 THIRD SYMPOSIUM ON FASTENINGAND JOINING TECHNOLOGY2-7-1 Bonded Joint and Bolted Joint TechnologiesThird Floor, David L. Lawrence Convention Center, Room 304

4:00pm–5:45pm

Session Chair: Sayed Nassar, Oakland University, Rochester,MI, United States

Session Co-Chair: Thomas Whitney, University of Dayton,Dayton, OH, United States

4:00pm – The Effect of Temperature, Thickness, andWorking Time on Adhesive PropertiesTechnical Paper Publication. IMECE2018-86737Nick Aerne, John P. Parmigiani, Oregon State University,Corvallis, OR, United States

4:21pm – Finite Element Analysis of the Load Factor andDesign for Bolted T-Shape Flange Joints Consisting ofDissimilar Clamped PartsTechnical Paper Publication. IMECE2018-87335Shunichiro Sawa, Hardlock Industry Co., Ltd., Tokyo, Japan,Yasuhisa Sekiguchi, Hiroshima University, Hiroshima, Japan,Toshiyuki Sawa, Hiroshima University, Koto-City, Japan

4:42pm – Use of Tailored Fiber Placement (TFP) toReinforce Fastener Holes in CompositesTechnical Presentation. IMECE2018-87999Thomas Whitney, Gyaneshwar Tandon, University of Dayton,Dayton, OH, United States

5:03pm – Frequency Effect of Torsion on Rotating BendingFatigue Behavior of Gas Tungsten Arc (GTA) Welded AISI1018 and AISI 4140 Welded JointsTechnical Paper Publication. IMECE2018-88338Saad Aziz, Ahmet Eren, Muhammad Wahab, Louisiana StateUniversity, Baton Rouge, LA, United States

2-8 ADVANCED MATERIAL FORMING2-8-4 Testing and DefectsThird Floor, David L. Lawrence Convention Center, Room 302

4:00pm–5:45pm

Session Chair: Scott Wagner, Michigan Tech, Atlantic Mine,MI, United States

Session Co-Chair: Molla Hasan, Rutgers, The State Universityof New Jersey, Piscataway, NJ, United States

4:00pm – High-Throughput Fabrication and Testing ofMetallic Glass NanostructuresTechnical Presentation. IMECE2018-89835Molla Hasan, Rutgers, The State University of New Jersey,Piscataway, NJ, United States, Golden Kumar, Texas TechUniversity, Lubbock, TX, United States

4:21pm – Novel Approach for Tension Testing Micro TubesTechnical Paper Publication. IMECE2018-87244Scott Wagner, Michigan Tech, Atlantic Mine, MI, UnitedStates, William Emblom, University of Louisiana-Lafayette,Lafayette, LA, United States, Kevin M. Johnson, Kahaan P.Shah, Navrose Handa, Nihal Kapare, Michigan TechnologicalUniversity, Houghton, MI, United States

4:42pm – Experimental Analysis and Testing of theHemming Process Types Utilized in the AutomotiveIndustryTechnical Paper Publication. IMECE2018-87232Pablo Alberto Limon Leyva, Pedro De Jesus GarciaZugasti, Eder Hazael Govea Valladares, Instituto Tecnológicode San Luis Potosi, San Luis Potosi, Mexico, Antonio deJesus Balvantin Garcia, University of Guanajuato, Salamanca,Guanajuato, Mexico, Jose Angel Diosdado De La Pena,Universidad De Guanajuato, Salamanca, Mexico, Isidro deJesus Sanchez Arce, Instituto Tecnológico de San LuisPotosi, San Luis Potosi, Mexico

5:03pm – Springback Analysis in Hybrid MaterialDeformationTechnical Paper Publication. IMECE2018-86455Elizabeth Mamros, Pennsylvania State University, BehrendCollege, McMurray, PA, United States, Chetan Nikhare,Pennsylvania State University, Erie, PA, United States

5:24pm – Simulation and Experiment Research on SqueezeCasting Combined With Forging of Automobile Control ArmTechnical Paper Publication. IMECE2018-86006Liang Zhenglong, Zhang Qi, Xi’an Jiaotong University, Xi’an,China

2-9 INNOVATIVE PRODUCT DESIGN2-9-2 Innovative Product Design IIFourth Floor, David L. Lawrence Convention Center, Room 401

4:00pm–5:45pm

Session Chair: Joao Silva, Universidade do Minho,Guimaraes, Portugal

Session Co-Chair: Joao Sarraipa, UNINOVA - DEE/FCT/UNL,Caparica, Portugal

4:00pm – A Mathematical Functional DecompositionApproach Through Granularity Partition Process inQuotient SpaceTechnical Paper Publication. IMECE2018-86217Yu-Tong Li, China University of Petroleum, Qingdao, China,Yuxin Wang, China University of Petroleum, Huadong,Qingdao, Shandong, China

4:21pm – Visualization and Detection of Road Traffic EventsUsing Complex Event ProcessingTechnical Paper Publication. IMECE2018-87909Paulo Figueiras, Hugo Antunes, Guilherme Guerreiro,Ruben Costa, Ricardo Jardim-Goncalves, UniversidadeNova De Lisboa, Caparica, Portugal


26

4:42pm – Monitoring, Risk Assessment and Actuation forAlzheimer Patients: A Case StudyTechnical Paper Publication. IMECE2018-88166Fernando Luis-Ferreira, Joao Giao, Pedro Corista, JorgeCalado, Joao Sarraipa, UNINOVA, Caparica, Portugal

5:03pm – 3D Printing of Highly Thermal InsulatedThermosetsTechnical Presentation. IMECE2018-89539Biran Wang, Kristen Arias, Zimeng Zhang, Zhijian Pei,Shiren Wang, Texas A&M University, College Station, TX,United States

5:24pm – Effects of Environmental Conditions onGeometrical and Mechanical Properties of PolycarbonateSamples Made by the Fused Filament Fabrication ProcessTechnical Presentation. IMECE2018-89328Yishu Yan, Lichen Fang, Ojaswi Agarwal, Kevin Hemker,Sung Kang, Johns Hopkins University, Baltimore, MD, UnitedStates

2-11 COMPUTATIONAL MODELING ANDSIMULATION FOR ADVANCEDMANUFACTURING2-11-4 Advanced Manufacturing Processes-Modelingand Simulation VThird Floor, David L. Lawrence Convention Center, Room 303

4:00pm–5:45pm

Session Chair: Tien-Chien Jen, University of Johannesburg,Johannesburg, South Africa


4:00pm – Randoms Subspace Identification in ModalAnalysis of Port CraneTechnical Presentation. IMECE2018-86993Xiuzhong Xu, Shanghai Maritime University, Shanghai,Shanghai, China, Weidong Zhu, University of Maryland,Baltimore County, Baltimore, MD, United States, Xu Zhang,Shanghai Maritime University, Shanghai, China

4:21pm – Feasibility Study of Condition Monitoring forSome Event Around the Crosshead in a ReciprocatingCompressorTechnical Paper Publication. IMECE2018-87153Yoshifumi Mori, Tokuyama Corporation, Yamaguchi, Japan,Takashi Saito, Yu Mizobe, Yamaguchi University, Ube City/Yamaguchi, Japan

4:42pm – The Mechanistic Process Comparison Between aNovel Slotted Injection Manifold Versus the MultipleInjection Manifold of a Low Pressure Square Type AtomicLayer Deposition ReactorTechnical Paper Publication. IMECE2018-86401Rigardt A.M. Coetzee, Tien-Chien Jen, University ofJohannesburg, Johannesburg, South Africa

5:03pm – Generation Mechanism of Interfacial ResidualStress and its Effect on Mechanical Properties of HybridFiber-Reinforced Thermoplastic Polymer (HFRTP)Technical Paper Publication. IMECE2018-86523Wan Cao, Ning Kang, Lingyu Sun, Shanshu Xiang, XudongYang, Yiben Zhang, Beihang University, Beijing, China

5:24pm – Analysis of Tool Position Error Induced SurfaceTopography Changes in Five-Axis Flank MillingTechnical Paper Publication. IMECE2018-86898Hao Si, Liping Wang, Tsinghua University, Beijing, Beijing,China


27

NOTES

28

3-1-1: General Aerospace

3-2-1: Advances in Aerodynamics

3-3-1: Novel Aerodynamics and Aerospace Propulsion Systems

3-4-1: Advances in Aerospace Structures and Materials – 1

3-4-2: Advances in Aerospace Structures and Materials – 2

3-5-1: Beam, Plate, and Shell Structures

3-6-1; Lightweight Sandwich Composites and Layered Structures – 1 (in Honor ofProf. Frostig)

3-6-2: Lightweight Sandwich Composites and Layered Structures – 2 (in Honor ofProf. Frostig)

3-7-1: Dynamic Behavior of Composites

3-8-1: Dynamics and Control of Aerospace Structures

3-9-1: Materials and Structures at High Temperature and Extreme Conditions

3-10-1: Impact, Damage and Fracture of Composite Structures

3-12-1: Peridynamics Modeling – 1



3-13-1: Multibody Dynamics Simulation in Aerospace Structures

3-17-1: Nonlinear Problems in Aerospace Structures

3-18-1: Congress-Wide Symposium on NDE&SHM – Structural Health Monitoring ofAerospace Vehicles

3-19-1: Congress-Wide Symposium on NDE&SHM – Nondestructive Evaluation andStructural Health Monitoring of Composite Materials and Structures

3-20-1: Advances in Aerospace Technology Plenary I

3-20-2: Advances in AerospaceTechnology Plenary II

Track OrganizerWeihua Su, University of Alabama,

United StatesYingtao Liu, University of Oklahoma,

United States

Topic OrganizersJose C. Pascoa, Universidade Da Beira

Interior, PortugalMichele Trancossi, Sheffield Hallam

University – ACES, United KingdomJakson Augusto Leger Monteiro,

University of Cape Verde, Cape VerdeCarlos Xisto, Chalmers University of

Technology, SwedenAbdollah Afjeh, University of Toledo,

United StatesDianyun Zhang, University of

Connecticut, United StatesYingtao Liu, University of Oklahoma,

United StatesXin Ning, Pennsylvania State University,

United StatesZahra Sotoudeh, Cal Poly Pomona,

United StatesXin-Lin Gao, Southern Methodist

University, United StatesVictor Birman, Missouri University of

Science and Technology, United

StatesOded Rabinovitch, Technion – Israel

Institute of Technology, IsraelZhangxian Yuan, Georgia Inst of

Technology, United StatesWeiyi Lu, Michigan State University,

United StatesBaoxing Xu, University of Virginia, United

StatesMeng Wang, University of California, San

Diego, United StatesUttam Chakravarty, University of New

Orleans, United StatesNikolaos Xiros, University of New

Orleans, Naval Arch & Marine Eng.,United States

Evan Pineda, NASA Glenn ResearchCenter, United States

Natasha Vermaak, Lehigh University,United States

Pavana Prabhakar, University ofWisconsin-Madison, United States

Kwek Tze Tan, The University of Akron,United States

Ali Najafi, ANSYS Inc., United StatesErdogan Madenci, University of Arizona,

United StatesErkan Oterkus, University of Strathclyde,

United Kingdom

Jinwei Shen, University of Alabama,United States

Erasmo Carrera, Politecnico Di Torino,Italy

Matteo Filippi, Politecnico Di Torino, ItalyAlfonso Pagani, Politecnico Di Torino,

ItalyYiska Goldfeld, Technion – Israel Institute

of Technology, Israel Andrei Zagrai, New Mexico Institute of

Mining & Technology, United States Francesco Lanza Di Scalea, University of

California San Diego, United States Yanfeng Shen, Shanghai Jiao Tong

University, China

Session OrganizersCaglar Oskay, Vanderbilt University,

United StatesGeorge Kardomateas, Georgia Institute

of Technology, United States Charles Wojnar, Missouri S&T, United

States

TRACK 3 ADVANCES IN AEROSPACETECHNOLOGYWEDNESDAY, NOVEMBER 14

3-20 PLENARY3-20-1 Advances in AerospaceTechnology Plenary IThird Floor, David L. Lawrence Convention Center, Room 304

9:00am–9:45am

9:00am – Rapid, Physics-Based Reduced Order Modelingof Nonlinear AerodynamicsPlenary Presentation. IMECE2018-90092Marilyn Smith, Georgia Institute of Technology, Atlanta, GA,United States

3-1 GENERAL AEROSPACE3-1-1 General AerospaceThird Floor, David L. Lawrence Convention Center, Room 308

10:00am–11:45am

Session Chair: Yingtao Liu, University of Oklahoma, Norman,OK, United States

Session Co-Chair: Caglar Oskay, Vanderbilt University,Nashville, TN, United States

10:00am – Photo-Acoustic Based Non-Contact and Non-Destructive Evaluation for Detection of Damage Precursorsin CompositesTechnical Paper Publication. IMECE2018-86148Siqi Wang, Liangzhong Xiang, Yingtao Liu, Hong Liu,University of Oklahoma, Norman, OK, United States

10:21am – Fabrication, Optimization, and Characterizationof PDMS/CNF Nanocomposite Sensor ArraysTechnical Paper Publication. IMECE2018-86269Wenyuan Luo, Yingtao Liu, Mrinal Saha, University ofOklahoma, Norman, OK, United States, Steven Patterson,Thomas Robison, NNSA’s National Security Campus operatedby Honeywell, Kansas City, MO, United States

10:42am – Design and Optimization of a MultipurposeUrban Firefighting and Disaster Relief UAVTechnical Paper Publication. IMECE2018-86321Mohammed Mayeed, Kennesaw State University, Marietta,GA, United States

11:03am – About the Immediate Shift From Large-SizedMachine Boeing 747 to Boeing 777Technical Paper Publication. IMECE2018-86770Masako Shishido, IWATE University, Morioka, Japan

11:24am – EHSA Primary Flight Controls Seals WearDegradation ModelTechnical Paper Publication. IMECE2018-87080Antonio C. Bertolino, Rocco Gentile, Giovanni Jacazio,Francesco Marino, Massimo Sorli, Politecnico di Torino,Torino, Italy

3-18 CONGRESS-WIDE SYMPOSIUM ONNDE & SHM: STRUCTURAL HEALTHMONITORING OF AEROSPACE VEHICLES3-18-1 Congress-Wide Symposium on NDE & SHM:Structural Health Monitoring of Aerospace VehiclesThird Floor, David L. Lawrence Convention Center, Room 307

10:00am–11:45am

Session Chair: Yiska Goldfeld, Technion - Israel Institute ofTechnology, Haifa, Israel

Session Co-Chair: Andrei Zagrai, New Mexico Institute ofMining & Technology, Socorro, NM, United States

10:00am – INTEGRATING THREEINSPECTION/MONITORING METHODS FOR AEROSPACEAPPLICATIONSTechnical Presentation. IMECE2018-87548Amir Nasrollahi, Piervincenzo Rizzo, University of Pittsburgh,Pittsburgh, PA, United States

10:21am – Hybrid Carbon Based Textile Reinforcement forMonitoring Water InfiltrationTechnical Presentation. IMECE2018-89241Yiska Goldfeld, Gali Perry, Technion - Israel Institute ofTechnology, Haifa, Israel, Gözdem Dittel, Till Quadflieg,Thomas Gries, RWTH Aachen University, Aachen, Germany

10:42am – Disbond Detection in a Honeycomb CompositePlate Using an Ultrasonic MethodTechnical Presentation. IMECE2018-89310Ajit Mal, Fei Gao, Lifu Wang, Steffen Tai, Leonardo Araque,University of California, Los Angeles, Los Angeles, CA, UnitedStates, Jing Lin, Beihang University, Beijing, Beijing, China

11:03am – Development of in Orbit Guided WaveExperimentsTechnical Presentation. IMECE2018-89508John Sanchez, Andrei Zagrai, New Mexico Institute of Mining& Technology, Socorro, NM, United States

11:24am – A Piezoelectric-Based Wireless Sensor forMonitoring Strain Through Inductive CouplingTechnical Presentation. IMECE2018-89947Paul Ferri, Xiyue Zou, Rutgers, The State University of NewJersey, Piscataway, NJ, United States, Patrick V. Hull, NASAMarshall Space Flight Center, Huntsville, AL, United States,Aaron Mazzeo, Rutgers, The State University of New Jersey,Piscataway, NJ, United States

TRACK 3 ADVANCES IN AEROSPACE TECHNOLOGY – WEDNESDAY, NOVEMBER 14

29

3-4 ADVANCES IN AEROSPACESTRUCTURES AND MATERIALS3-4-1 Advances in Aerospace Structures andMaterials – 1Third Floor, David L. Lawrence Convention Center, Room 308

1:45pm–3:30pm

Session Chair: Dianyun Zhang, University of Connecticut,Storrs, CT, United States

Session Co-Chair: Xin Ning, Pennsylvania State University,Urbana, IL, United States

1:45pm – The Effects of Layer-by-Layer Thickness andFiber Volume Fraction Variation on the MechanicalPerformance of a Pressure VesselTechnical Paper Publication. IMECE2018-86468Emre Özaslan, Volkan Coskun, Ali Yetgin, Bülent Acar, Tarik Olgar, Roketsan Inc., Ankara, Turkey

2:06pm – Recent Advancements in Spikes Used inHypersonic Re-Entry Vehicles by Using CFDTechnical Paper Publication. IMECE2018-86550E.L.N. Rohit Madhukar, Koneru Lakshmaiah EducationalFoundation, Durg, Chhattisgarh, India, Harish Panjagala,Koneru Lakshmaiah Educational Foundation, Guntur, AndhraPradesh, India

2:27pm – Effect of Different Cutting Depths to the CuttingForces and Machining Quality of CFRP Parts in OrthogonalCutting: A Numerical and Experimental ComparisonTechnical Paper Publication. IMECE2018-87008Farid Miah, Institut Clement Ader, Toulouse, France,Emmanuel De-Luycker, Université de Toulouse, INP-ENIT,Tarbes, France, Frederic Lachaud, Yann Landon, RobertPiquet, Institut Clément Ader, Université de Toulouse, CNRS,INSA, ISAE-SUPAERO, Mines Albi, UPS, Toulouse, France

2:48pm – Development of Structural Neural NetworkDesign Tool for Buckling Behaviour of Skin-StringerStructures Under Combined Compression and ShearLoadingTechnical Paper Publication. IMECE2018-87970Aydin Okul, Turkish Aerospace Industry, Ankara, Turkey,Ercan Gurses, Middle East Technical University, Ankara,Turkey

3:09pm – Determination of Johnson Cook Material ModelConstants and Their Influence on Machining Simulations ofTungsten Heavy AlloyTechnical Paper Publication. IMECE2018-88270Kiran Sagar Chithajalu, Amrita Priyadarshini, Amit KumarGupta, Sidharth Kumar Shukla, BITS Pilani HyderabadCampus, Hyderabad, Telengana, India

3-12 PERIDYNAMICS MODELING3-12-1 Peridynamics Modeling – 1Third Floor, David L. Lawrence Convention Center, Room 306

1:45pm–3:30pm

Session Chair: Erdogan Madenci, University of Arizona,Tucson, AZ, United States

Session Co-Chair: Erkan Oterkus, University of Strathclyde,Glasgow, United Kingdom

1:45pm – Peridynamic Modeling Using a Commercial FiniteElement SoftwareTechnical Presentation. IMECE2018-86022Zhenghao Yang, Mingyang Li, Erkan Oterkus, SeldaOterkus, University of Strathclyde, Glasgow, United Kingdom

2:06pm – Peridynamics/Digital Imaging Correlation forTracking Crack Propagation PathsTechnical Presentation. IMECE2018-89721Erdogan Madenci, University of Arizona, Tucson, AZ, UnitedStates, Amin Yaghoobi, Atila Barut, Global EngineeringResearch and Technologies, Tucson, AZ, United States, Nam Phan, Naval Air Systems Command (NAVAIR), PatuxentRiver, MD, United States

2:27pm – Peridynamic Modelling of Fatigue Crack GrowthIn Welded JointsTechnical Presentation. IMECE2018-89663Kyutack Hong, Selda Oterkus, University of Strathclyde,Glasgow, United Kingdom

2:48pm – One Inclusion in the Infinite Peristatic MatrixTechnical Paper Publication. IMECE2018-86519Valeriy Buryachenko, Micromechanics & Composites LLC,Dayton, OH, United States

3:09pm – Fully Coupled Thermomechanical PeridynamicAnalysis of Composite StructuresTechnical Presentation. IMECE2018-89547Yan Gao, Selda Oterkus, University of Strathclyde, Glasgow,United Kingdom


30

3-19 CONGRESS-WIDE SYMPOSIUM ONNDE & SHM: NONDESTRUCTIVEEVALUATION AND STRUCTURAL HEALTHMONITORING OF COMPOSITE MATERIALSAND STRUCTURES3-19-1 Congress-Wide Symposium on NDE & SHM:Nondestructive Evaluation and Structural HealthMonitoring of Composite Materials and StructuresThird Floor, David L. Lawrence Convention Center, Room 307

1:45pm–3:30pm

Session Chair: Francesco Lanza Di Scalea, University ofCalifornia San Diego, La Jolla, CA, United States

Session Co-Chairs: Yanfeng Shen, Shanghai Jiao TongUniversity, Shanghai, China, Andrei Zagrai, New MexicoInstitute of Mining & Technology, Socorro, NM, United States

1:45pm – Application of Interface Guided Waves forInspection of Hybrid Bonded Joints: Semi Analytical FinalElement ApproachTechnical Presentation. IMECE2018-86075Mark Jahanbin, Villanova University / Boeing Company,Mukilteo, WA, United States, Sridhar Santhanam, VillanovaUniversity, Collegeville, PA, United States

2:06pm – Guided Wave Generation and Propagation in Self-Sensing Piezoelectric Composite Plates for StructuralHealth MonitoringTechnical Paper Publication. IMECE2018-86229Junzhen Wang, Yanfeng Shen, Shanghai Jiao Tong University,Shanghai, China

2:27pm – Advanced Structural Testing With OpticalMetrologyTechnical Presentation. IMECE2018-87519Jack Irwin, Trilion Quality Systems, King of Prussia, PA, UnitedStates

2:48pm – Guided Wave Techniques for Damage Detectionin Composite Aerospace StructuresTechnical Presentation. IMECE2018-89370Francesco Lanza Di Scalea, Margherita Capriotti, RantingCui, University of California San Diego, La Jolla, CA, UnitedStates, Antonino Spada, University of Palermo, Palermo, Italy

3-2 ADVANCES IN AERODYNAMICS3-2-1 Advances in AerodynamicsThird Floor, David L. Lawrence Convention Center, Room 307

3:45pm–5:30pm

Session Chair: Jose C. Pascoa, Universidade Da Beira Interior,Covilha, Portugal

Session Co-Chairs: Michele Trancossi, Sheffield HallamUniversity - ACES, Sheffield, Sheffield, United Kingdom,Jakson Augusto Leger Monteiro, University of Cape Verde,Praia, Cape Verde

3:45pm – Solution to Optimize the Airfoils Shapes PlacedInto a Supersonic Viscous FlowTechnical Paper Publication. IMECE2018-86781Victorita Radulescu, University Politechnica of Bucharest,Bucharest, Romania

4:06pm – Investigations on Unsteady Flow Excitation andMechanical Performance of Last Turbine Stage Long BladeUsing Fluid-Structure Interaction MethodTechnical Paper Publication. IMECE2018-86950Jun Li, Zhigang Li, Liming Song, Xian Jiaotong University,Xian, Shaanxi, China, Qinghua Deng, Xi’An JiaotongUniversity, Xi’An, China

4:27pm – Effects of Harmonic Vibration on Cycloidal RotorPerformanceTechnical Paper Publication. IMECE2018-87103Jakson Augusto Leger Monteiro, University of Cape Verde,Praia, Cape Verde, Jose C. Pascoa, Universidade Da BeiraInterior, Covilha, Portugal

4:48pm – CFD-Based Aerodynamic Analysis of the FlowPast an Airfoil With Passive Trapezoidal and PerforatedVortex GeneratorsTechnical Paper Publication. IMECE2018-87440Charbel Bou-Mosleh, Rawad Himo, Charbel Habchi, Notre Dame University - Louaize, Zouk Mosbeh, Lebanon

5:09pm – Experimental Analysis of Alternative DielectricMaterials for DBD Plasma ActuatorsTechnical Paper Publication. IMECE2018-87455Frederico Rodrigues, Jose C. Pascoa, Universidade da Beira Interior, Covilha, Portugal, Michele Trancossi, SheffieldHallam University, Sheffield, United Kingdom


31

3-7 DYNAMIC BEHAVIOR OF COMPOSITES3-7-1 Dynamic Behavior of CompositesThird Floor, David L. Lawrence Convention Center, Room 306

3:45pm–5:30pm

Session Chair: Weiyi Lu, Michigan State University,East Lansing, MI, United States

Session Co-Chairs: Baoxing Xu, University of Virginia,Charlottesville, VA, United States, Meng Wang, University of California, San Diego, La Jolla, CA, United States

3:45pm – Energy Capture Mechanism of Liquid Nanofoamfor Blast Wave MitigationTechnical Presentation. IMECE2018-89404Weiyi Lu, Michigan State University, East Lansing, MI, UnitedStates

4:06pm – Liquid Nanofoam System Under Compression:Competition Between Liquid Infiltration and NanoporeDeformationTechnical Presentation. IMECE2018-89110Yue Zhang, University of Virginia, Charlottesville, VA, UnitedStates, Mingzhe Li, Michigan State University, East Lansing,MI, United States, Baoxing Xu, University of Virginia,Charlottesville, VA, United States, Weiyi Lu, Michigan StateUniversity, East Lansing, MI, United States

4:27pm – Enhanced Interaction Between Filler and TubeWall in Liquid Nanofoam-Filled Thin-Walled TubesTechnical Presentation. IMECE2018-89287Mingzhe Li, Junfeng Li, Michigan State University, EastLansing, MI, United States, Saeed Barbat, Ford MotorCompany, Dearborn, MI, United States, Mohamed RidhaBaccouche, Ford, Ann Arbor, MI, United States, Weiyi Lu,Michigan State University, East Lansing, MI, United States

4:48pm – Behavior of Lithium-Ion Battery Pouch CellsUnder Dynamic PenetrationTechnical Presentation. IMECE2018-88858Meng Wang, University of California, San Diego, La Jolla, CA,United States

5:09pm – Static and Dynamic Mechanical Behavior ofSuspended Graphene/Silver NanoWire/Graphene(Gr/AgNW/Gr) CompositeTechnical Presentation. IMECE2018-89529Chenglin Wu, Chuanrui Guo, Yanxiao Li, Missouri Universityof Science and Technology, Rolla, MO, United States, David Veysset, Yuchen Sun, Steven E. Kooi, Keith A.Nelsom, Massachusetts Institute of Technology, Cambridge,MA, United States, Genda Chen, Missouri University ofScience and Technology, Rolla, MO, United States


3-20 PLENARY3-20-2 Advances in Aerospace Technology Plenary IIThird Floor, David L. Lawrence Convention Center, Room 305

8:00am–8:45am

8:00am – On the Flightpath to Adaptive AerospaceStructures: Articulated TensegrityPlenary Presentation. IMECE2018-90093George Lesieutre, Pennsylvania State University, UniversityPark, PA, United States

3-6 LIGHTWEIGHT SANDWICHCOMPOSITES AND LAYEREDSTRUCTURES—IN HONOR OF PROF.FROSTIG3-6-1 Lightweight Sandwich Composites andLayered Structures – 1 (in Honor of Prof. Frostig)Third Floor, David L. Lawrence Convention Center, Room 306

8:55am–10:40am

Session Chair: Victor Birman, Missouri University of Scienceand Technology, St. Louis, MO, United States

Session Co-Chair: George Kardomateas, Georgia Institute ofTechnology, Alpharetta, GA, United States

8:55am – Structural Modelling of Reinforced CementComposite Under Uniaxial LoadingTechnical Presentation. IMECE2018-88960Yiska Goldfeld, Technion - Israel Institute of Technology, Haifa,Israel

9:10am – Advanced Zig-Zag Beam Theories for SandwichStructures AnalysesTechnical Paper Publication. IMECE2018-86783Matteo Filippi, Erasmo Carrera, Politecnico Di Torino, Torino,Italy

9:25am – Higher-Order Shell Element for the Static andFree-Vibration Analysis of Sandwich StructuresTechnical Paper Publication. IMECE2018-86784Erasmo Carrera, Stefano Valvano, Matteo Filippi, Politecnicodi Torino, Torino, Italy

9:40am – Nonlocal Beam and Plate Models From Three-Dimensional Stress Gradient ElasticityTechnical Presentation. IMECE2018-87739Isaac Elishakoff, Florida Atlantic University, Boca Raton, FL,United States, Florian Hache, Florida Atlantic University,Moussy Le Neuf, France, Noel Challamel, University BritagneSud, Lorient, France


32

9:55am – Optimization of the Composite Airplane Fuselagefor an Optimum Structural IntegrityTechnical Paper Publication. IMECE2018-88215Athreya Nagesh, Penn State Harrisburg, Middletown, PA,United States, Ola Rashwan, Penn State University,Middletown, PA, United States, Ma’moun Abu-Ayyad, PennState Harrisburg, Middletwon, PA, United States

10:10am – Control of Fracture at the Interface of DissimilarMaterials Using Randomly Oriented Inclusions and FiberNetworksTechnical Presentation. IMECE2018-88664Victor Birman, Missouri University of Science and Technology,St. Louis, MO, United States

3-8 DYNAMICS AND CONTROL OFAEROSPACE STRUCTURES3-8-1 Dynamics and Control of AerospaceStructuresThird Floor, David L. Lawrence Convention Center, Room 307

8:55am–10:40am

Session Chair: Uttam Chakravarty, University of New Orleans,Kenner, LA, United States

Session Co-Chair: Nikolaos Xiros, University of New Orleans,New Orleans, LA, United States

8:55am – Active Vibration Control of a Helicopter RotorBlade by Using a Linear Quadratic RegulatorTechnical Paper Publication. IMECE2018-86319Md. Mosleh Uddin, Pratik Sarker, University of New Orleans,New Orleans, LA, United States, Colin R. Theodore, NASAAmes Research Center, Mountain View, CA, United States,Uttam Chakravarty, University of New Orleans, Kenner, LA,United States

9:10am – A Comparative Study Between Selective LaserMelting and Electron Beam Additive Manufacturing Basedon Thermal ModelingTechnical Paper Publication. IMECE2018-86428M. Shafiqur Rahman, Paul Schilling, Paul D. Herrington,University of New Orleans, New Orleans, LA, United States,Uttam Chakravarty, University of New Orleans, Kenner, LA,United States

9:25am – An Analysis of Harmonic Airloads Acting onHelicopter Rotor BladesTechnical Paper Publication. IMECE2018-86625Iftekhar Alam Riyad, University of New Orleans, New Orleans,LA, United States, Uttam Chakravarty, University of NewOrleans, Kenner, LA, United States

9:40am – A Hybrid Energy Harvesting System Based onSolar Radiation and Mechanical VibrationTechnical Paper Publication. IMECE2018-86928M. Shafiqur Rahman, University of New Orleans, NewOrleans, LA, United States, Uttam Chakravarty, University ofNew Orleans, Kenner, LA, United States

9:55am – System Identification of Hydrokinetic EnergyHarvester Using Flow Induced OscillationsTechnical Paper Publication. IMECE2018-87059Ralph Saxton, Soumyadip Patra, Nikolaos Xiros, Universityof New Orleans, New Orleans, LA, United States, MichaelBernitsas, Hai Sun, University of Michigan, Ann Arbor, MI,United States

10:10am – Characterizations of Diagnostic Properties andDetection Techniques of Fentanyl and Related SyntheticOpioidsTechnical Paper Publication. IMECE2018-87803M. Shafiqur Rahman, University of New Orleans, NewOrleans, LA, United States, Uttam Chakravarty, University ofNew Orleans, Kenner, LA, United States

3-9 HIGH TEMPERATURE MATERIALS ANDSTRUCTURES3-9-1 Materials and Structures at High Temperatureand Extreme ConditionsFourth Floor, David L. Lawrence Convention Center, Room 403

8:55am–10:40am

Session Chair: Evan Pineda, NASA Glenn Research Center,Cleveland, OH, United States

Session Co-Chairs: Natasha Vermaak, Lehigh University,Bethlehem, PA, United States, Pavana Prabhakar, University ofWisconsin-Madison, Madison, WI, United States

8:55am – Method of Fundamental Solution inThermoelasticity of Random Structure Matrix CompositesTechnical Paper Publication. IMECE2018-86515Valeriy Buryachenko, Micromechanics & Composites LLC,Dayton, OH, United States

9:16am – Optimization of Spatially Tailored Metal-CeramicComposite Airframe in a High-Speed EnvironmentTechnical Presentation. IMECE2018-87960Phillip Deierling, University of Iowa, Iowa City, IA, UnitedStates, Emily Dryer, Ohio State University, Columbus, OH,United States, Olesya Zhupanska, University of Arizona,Tucson, AZ, United States

9:37am – Microstructure Based Constitutive Model for Two-Phase SuperalloysTechnical Presentation. IMECE2018-88358Masoud Ghorbani Moghaddam, Medical College ofWisconsin, Milwaukee, WI, United States, Ajit Achuthan,Clarkson University, Potsdam, NY, United States, Brett A.Bednarcyk, Steven Arnold, Evan Pineda, NASA GlennResearch Center, Cleveland, OH, United States

9:58am – Effects of Microstructure on the ViscoplasticResponse of Sea IceTechnical Presentation. IMECE2018-89408Shuvrangsu Das, Pedro Ponte Castañeda, University ofPennsylvania, Philadelphia, PA, United States


33

10:19am – A Novel Methodology for AccurateDetermination of Local Interphase Modulus Gradients inModel NanocompositesTechnical Presentation. IMECE2018-89667Pavan Kolluru, Duke University, Durham, NC, United States,Min Zhang, Northwestern University, Evanston, IL, UnitedStates, L. Catherine Brinson, Duke University, Durham, NC,United States

3-5 BEAM, PLATE, AND SHELLSTRUCTURES3-5-1 Beam, Plate, and Shell StructuresFourth Floor, David L. Lawrence Convention Center, Room 403

10:50am–12:35pm

Session Chair: Zahra Sotoudeh, Cal Poly Pomona, Ontario,CA, United States

Session Co-Chair: Xin-Lin Gao, Southern MethodistUniversity, Dallas, TX, United States

10:50am – Finite Element Modelling of TBC FailureMechanisms by Using XFEMTechnical Paper Publication. IMECE2018-86576Safa Mesut Bostanci, Aselsan A.S., Ankara, Turkey, ErcanGurses, Demirkan Coker, Middle East Technical University,Ankara, Turkey

11:11am – Mixed One-/Two-Dimensional Models With NodeDependent Kinematic Capabilities for the Analysis ofMetallic and Composite StructuresTechnical Paper Publication. IMECE2018-87490Enrico Zappino, Erasmo Carrera, Politecnico di Torino,Torino, Italy

11:32am – New Non-Classical Kirchhoff Rod ModelIncorporating the Microstructure EffectTechnical Presentation. IMECE2018-89994Gongye Zhang, Xin-Lin Gao, Southern Methodist University,Dallas, TX, United States

11:53am – Residual Strength Prediction of 3D TextileComposites Under Combined Mechanical Loading andHostile Environmental ConditionsTechnical Presentation. IMECE2018-89772Qingda Yang, Yuhang Yang, University of Miami, CoralGables, FL, United States

12:14pm – A Preliminary Design Method for Axial TurbineTechnical Paper Publication. IMECE2018-88251Fan Yang, Xi’an Jiaotong University, Xi’an, China, Lei Li,Shouyi Sun, Northwestern Polytechnical University, Xi’an,China

3-6 LIGHTWEIGHT SANDWICHCOMPOSITES AND LAYEREDSTRUCTURES—IN HONOR OF PROF.FROSTIG3-6-2 Lightweight Sandwich Composites andLayered Structures – 2 (in Honor of Prof. Frostig)Third Floor, David L. Lawrence Convention Center, Room 306

10:50am–12:35pm

Session Chair: Zhangxian Yuan, Georgia Institute ofTechnology, Atlanta, GA, United States

Session Co-Chair: Oded Rabinovitch, Technion - IsraelInstitute of Technology, Haifa, Israel

10:50am – Flexural Elastic Wave Propagation in a PeriodicComposite Plate Structure Incorporating Microstructure,Surface Energy and Foundation EffectsTechnical Presentation. IMECE2018-87262Gongye Zhang, Xin-Lin Gao, Southern Methodist University,Dallas, TX, United States

11:05am – Hygro-Thermal 2D Debonding in Sandwich-LikeTilesTechnical Presentation. IMECE2018-88718Shai Feldfogel, Oded Rabinovitch, Technion - Israel Instituteof Technology, Haifa, Israel

11:20am – Dynamic Stability Behavior of Sandwich PanelsUnder Impulsive Axial LoadsTechnical Presentation. IMECE2018-88946Zhangxian Yuan, Georgia Institute of Technology, Atlanta, GA,United States, George Kardomateas, Georgia Institute ofTechnology, Alpharetta, GA, United States

11:35am – A High Order Approach for Sandwich BeamsWith Face/Core debondsTechnical Presentation. IMECE2018-88947Zhangxian Yuan, Georgia Institute of Technology, Atlanta, GA,United States, George Kardomateas, Georgia Institute ofTechnology, Alpharetta, GA, United States, Leif Carlsson,Florida Atlantic University, Boca Raton, FL, United States

11:50am – Exact Analytical Buckling Loads Calculation ofThin Orthotropic PlatesTechnical Presentation. IMECE2018-88959Moshe Eisenberger, Technion - Israel Institute of Technology,Technion City, Israel, Joseph Tenenbaum, Aharon Deutsch,Technion - Israel Institute of Technology, Haifa, Israel

12:05pm – Influence of Core Deformation Constraints onEnergy Release Rate in Debonding of Honeycomb CoreSandwichTechnical Presentation. IMECE2018-89804Mohammad Tauhiduzzaman, Leif Carlsson, Florida AtlanticUniversity, Boca Raton, FL, United States


34


10:50am–12:35pm

Session Chair: Erkan Oterkus, University of Strathclyde,Glasgow, United Kingdom

Session Co-Chair: Erdogan Madenci, University of Arizona,Tucson, AZ, United States

10:50am – Peridynamic Modeling of Composite LaminatesTechnical Presentation. IMECE2018-89554Erdogan Madenci, Mehmet Dorduncu, University of Arizona,Tucson, AZ, United States, Nam Phan, Naval Air SystemsCommand (NAVAIR), Patuxent River, MD, United States

11:11am – Peridynamics Formulation for Beam StructuresTechnical Presentation. IMECE2018-89550Cong Tien Nguyen, Selda Oterkus, University of Strathclyde,Glasgow, United Kingdom

11:32am – Modeling Material Anisotropy withPeridynamics: Part ITechnical Presentation. IMECE2018-89962Pablo Seleson, Jeremy Trageser, Oak Ridge NationalLaboratory, Oak Ridge, TN, United States, Max Gunzburger,Florida State University, Tallahassee, FL, United States

11:53am – Modeling Material Anisotropy withPeridynamics: Part IITechnical Presentation. IMECE2018-89970Pablo Seleson, Jeremy Trageser, Oak Ridge NationalLaboratory, Oak Ridge, TN, United States, Max Gunzburger,Florida State University, Tallahassee, FL, United States

12:14pm – Generalized Mori-Tanaka Approach inMicromechanics of Random Structure PeristaticCompositesTechnical Presentation. IMECE2018-89218Valeriy Buryachenko, Micromechanics & Composites LLC,Dayton, OH, United States

3-3 NOVEL AEROSPACE PROPULSIONSYSTEMS3-3-1 Novel Aerodynamics and Aerospace PropulsionSystemsFourth Floor, David L. Lawrence Convention Center, Room 403

2:05pm–3:50pm

Session Chair: Jose C. Pascoa, Universidade Da Beira Interior,Covilha 6200, Portugal

Session Co-Chairs: Carlos Xisto, Chalmers University ofTechnology, Göteborg, Sweden, Abdollah Afjeh, University ofToledo, Toledo, OH, United States

2:05pm – Numerical Analysis of a Multi-Species MHDModel for Plasma Layer Control of Re-Entry VehiclesTechnical Paper Publication. IMECE2018-87467Filipe Dias, Universidade da Beira Interior, Covilhã, Portugal,Carlos Xisto, Chalmers University of Technology, Göteborg,Sweden, Jose C. Pascoa, Universidade da Beira Interior,Covilha, Portugal

2:26pm – Flight Load Analysis and Prediction Based onScaled Sequential Threshold Least-Squares (S2TLS)AlgorithmTechnical Presentation. IMECE2018-88993Shengwei Zhu, Yi Wang, University of South Carolina,Columbia, SC, United States

2:47pm – A Novel Approach for Satellite Attitude Control byUsing Solar SailingTechnical Paper Publication. IMECE2018-88311Ni Li, P. Arguelles, K. Chaput, S. Kenan, S. Kim, D. Li, Y. Vazquez, D. Viveros, T. Nye, California State University, Los Angeles, Los Angeles, CA, United States, K. Salinas,Northrop Grumman, Carson, CA, United States

3:08pm – A Review of Propulsion Systems for CubesatsTechnical Paper Publication. IMECE2018-88174Jose C. Pascoa, Odelma Teixeira, Gustavo Filipe,Universidade da Beira Interior, Covilhã, Portugal

3-4 ADVANCES IN AEROSPACESTRUCTURES AND MATERIALS3-4-2 Advances in Aerospace Structures andMaterials – 2Third Floor, David L. Lawrence Convention Center, Room 306

2:05pm–3:50pm

Session Chair: Yingtao Liu, University of Oklahoma, Norman,OK, United States

Session Co-Chair: Dianyun Zhang, University of Connecticut,Storrs, CT, United States

2:05pm – Method of Creating Composite ManufactureDrawingTechnical Presentation. IMECE2018-88823Chethan Rangaswamy, Rolls-Royce, Pune, India


35

2:26pm – Static Failure Analysis of Textile CompositeStructures Using Mechanics of Structure Genome inMSC.NASTRANTechnical Presentation. IMECE2018-89175Xin Liu, Purdue University, West Lafayette, IN, United States,Federico Gasco, Spirit AeroSystems, Inc., Wichita, KS, UnitedStates, Wenbin Yu, Purdue University, West Lafayette, IN,United States

2:47pm – Low-Velocity Impact and Interlaminar FractureToughness of Unidirectional and Quasi 3D BraidedCompositeTechnical Presentation. IMECE2018-89719Tony Wente, Wu Zhou, Xinyu Mao, Michigan State University,Lansing, MI, United States, Danielle Zeng, Ford, Dearborn, MI,United States, Xinran Xiao, Michigan State University, Lansing,MI, United States

3:08pm – Imperfection-Insensitive Axially LoadedCylindrical ShellsTechnical Presentation. IMECE2018-89894Xin Ning, Pennsylvania State University, Urbana, IL, UnitedStates

3:29pm – Homogenization Estimates for ViscoelasticComposites Based on an Incremental Variational PrincipleTechnical Presentation. IMECE2018-89598Jose E. Cotelo Alonso, Pedro Ponte Castañeda, Universityof Pennsylvania, Philadelphia, PA, United States

3-10 IMPACT, DAMAGE AND FRACTURE OFCOMPOSITE STRUCTURES3-10-1 Impact, Damage and Fracture of CompositeStructuresThird Floor, David L. Lawrence Convention Center, Room 307

2:05pm–3:50pm

Session Chair: Kwek Tze Tan, University of Akron, Akron, OH,United States

Session Co-Chair: Ali Najafi, ANSYS Inc., Houston, TX, UnitedStates

2:05pm – Mode-II Crack Initiation of Carbon Fiber EpoxyUnder Marine ConditionsTechnical Presentation. IMECE2018-89875Rodrigo Chavez, Veronica Eliasson, University of CaliforniaSan Diego, La Jolla, CA, United States

2:20pm – Composite Fan Case Damage From Fan BladeOut Replicated With Flat Panel Gas Gun TestingTechnical Presentation. IMECE2018-89178Andy VanderKlok, Williams International, Commerce CharterTownship, MI, United States, Jim Dorer, Xinran Xiao,Michigan State University, Lansing, MI, United States

2:35pm – Experimental Specimen for Classification ofMatrix Compression Damage in Carbon Fiber ReinforcedPolymersTechnical Paper Publication. IMECE2018-87132Taylor Rawlings, Kevin Carpenter, John P. Parmigiani,Oregon State University, Corvallis, OR, United States

2:50pm – Effect of Low Temperature Arctic Conditions onImpact and Post-Impact Mechanisms of CompositeSandwich StructuresTechnical Presentation. IMECE2018-88556Kwek Tze Tan, Mahfujul Khan, University of Akron, Akron,OH, United States

3:05pm – Lightning Strike Protection and EMI Shielding ofFiber Reinforced Composite Using Gold and SilverNanofilmsTechnical Paper Publication. IMECE2018-88639Praveen Bollavaram, Muhammad Rahman, RamazanAsmatulu, Wichita State University, Wichita, KS, United States

3:20pm – Elastic Metamaterial Design to Filter HarmonicMechanical Wave PropagationTechnical Paper Publication. IMECE2018-87753Gustavo Rodrigues, Universidade Estácio de Sá, Rio deJaneiro, Brazil, Hans Weber, Pontifical Catholic University ofRio de Janeiro, Rio de Janeiro, RJ, Brazil, Larissa Driemeier,University of São Paulo, São Paulo, Brazil


4:00pm–5:45pm

Session Chair: Erdogan Madenci, University of Arizona,Tucson, AZ, United States

Session Co-Chair: Erkan Oterkus, University of Strathclyde,Glasgow, United Kingdom

4:00pm – Peridynamic Model to Predict Fracture EvolutionDuring Lithiation ProcessTechnical Presentation. IMECE2018-89372Hanlin Wang, Erkan Oterkus, Selda Oterkus, University ofStrathclyde, Glasgow, United Kingdom

4:21pm – Peridynamic Modeling of Concrete PavementStructuresTechnical Presentation. IMECE2018-89515Nicolas Sau, Jose Medina, Universidad de Sonora,Hermosillo, Sonora, Mexico

4:42pm – Peridynamic Modeling of a Viscoelastic MaterialTechnical Presentation. IMECE2018-89659Yunke Huang, Selda Oterkus, University of Strathclyde,Glasgow, United Kingdom

5:03pm – Computational Homogenization in Peristatics ofPeriodic Structure CompositesTechnical Paper Publication. IMECE2018-86517Valeriy Buryachenko, Micr


36

3-13 MULTIBODY DYNAMICS SIMULATIONIN AEROSPACE STRUCTURES3-13-1 Multibody Dynamics Simulation in AerospaceStructuresFourth Floor, David L. Lawrence Convention Center, Room 403

4:00pm–5:45pm

Session Chair: Jinwei Shen, University of Alabama,Tuscaloosa, AL, United States

Session Co-Chair: Charles Wojnar, Missouri S&T, Rolla, MO,United States

4:00pm – Real Time Loading Test Rig for Flight ControlActuators Under PHM ExperimentationTechnical Paper Publication. IMECE2018-86967Piergiorgio Chiavaroli, Giuseppe Evangelista, Andrea deMartin, Giovanni Jacazio, Massimo Sorli, Politecnico diTorino, Torino, TO, Italy

4:21pm – Experimental Flight Validation of NATASHA’sResults for Aeroelastic Analysis of a HALE AircraftTechnical Presentation. IMECE2018-87878Ehsan Izadpanahi, Kishan Kalpoe, Florida InternationalUniversity, Miami, FL, United States, Pezhman Mardanpour,Florida International University, Weston, FL, United States

4:42pm – Fundamental Unstanding of Propeller WhirlFlutter Through Multibody Dynamics SimulationTechnical Presentation. IMECE2018-88792Christian Hoover, Jinwei Shen, University of Alabama,Tuscaloosa, AL, United States

5:03pm – Multibody Dynamics Study of Effects of Hub Typeon Tiltrotor Whirl Flutter and Rotor LoadsTechnical Presentation. IMECE2018-88793Kyle Nelson, Jinwei Shen, Christian Hoover, University ofAlabama, Tuscaloosa, AL, United States

5:24pm – Multibody Dynamics Analysis of Helicopter Rotor-Fuselage SystemsTechnical Presentation. IMECE2018-88795Jennifer Baggett, University of Alabama, Gardendale, AL,United States, Jinwei Shen, University of Alabama,Tuscaloosa, AL, United States

3-17 NONLINEAR PROBLEMS INAEROSPACE STRUCTURES3-17-1 Nonlinear Problems in Aerospace StructuresThird Floor, David L. Lawrence Convention Center, Room 306

4:00pm–5:45pm

Session Chair: Erasmo Carrera, Politecnico Di Torino, Torino,Italy

4:00pm – Comparative Study of Post-Buckling LoadRedistribution in Stiffened Aircraft Panel With and WithoutMaterial NonlinearityTechnical Paper Publication. IMECE2018-86346Enes Aydin, Turkish Aerospace Industries, Ankara, Ankara,Turkey, Altan Kayran, METU Center for Wind Energy, Ankara,Turkey

4:21pm – A Global-Local Strategy for the ElastoplasticAnalysis of Complex Metallic Structures via Component-Wise ApproachTechnical Paper Publication. IMECE2018-86564Erasmo Carrera, Ibrahim Kaleel, Manish Nagaraj, MarcoPetrolo, Politecnico di Torino, Torino, Italy

4:42pm – Evaluation of In-Plane and Out-of-Plane Stressesin Composite Structures Subjected to LargeDisplacements/RotationsTechnical Paper Publication. IMECE2018-86671Alfonso Pagani, Riccardo Augello, Erasmo Carrera,Politecnico di Torino, Torino, Italy

5:03pm – Virtual Vibration Correlation Technique (VCT) forNonlinear Analysis of Metallic and Composite StructuresTechnical Paper Publication. IMECE2018-86674Alfonso Pagani, Riccardo Augello, Erasmo Carrera,Politecnico di Torino, Torino, Italy

5:24pm – Nonlinear Dynamics of Rotating Structures andHelicopter BladesTechnical Paper Publication. IMECE2018-86786Matteo Filippi, Alfonso Pagani, Erasmo Carrera, Politecnicodi Torino, Torino, Italy


37

NOTES

38

4-1-1: Biomedical and Biotechnology Plenary I

4-1-2: Biomedical and Biotechnology Plenary II

4-2-1: Damage Biomechanics I: Blunt Impact Effects and Analysis

4-2-2: Damage Biomechanics II: Ballistic Impact and Blast Effects and Analysis

4-2-3: Damage Biomechanics III: Materials Characterization, Modeling andAnalysis

4-2-4: Damage Biomechanics IV: Cavitation as a Mechanism for Brain Injury

4-3-1: Vibration Characteristics and Characterisations

4-3-2: Vibration applications to Therapy and Rehabilitation

4-4-1: Tissue Characterisations

4-4-2: Biomedical Imaging and Characterisation

4-5-1: Biomaterials and Tissue I: Fabrication

4-5-2: Biomaterials andTissue II: Modelling

4-5-3: Biomaterials and Tissue III: Sythesis and Characteriazation

4-5-4: Biomaterials andTissue IV: Sythesis and Characteriazation

4-6-1: Mechanobiology

4-7-1: Detection and Monitoring Biomedical Devices

4-7-2: Surgical Assistive Devices

4-7-3: Fluid and Microfluid Biomedical Devices

4-7-4: Fluid and Microfluid Biomedical Devices

4-8-1: Dynamics and Control of Biomechanical Systems I

4-8-2: Dynamics and Control of Biomechanical Systems II

4-8-3: Dynamics and Control of Biomechanical Systems III

4-9-1: Clinical Applications of Bioengineering I – Experimental Methods

4-9-2: Clinical Applications of Bioengineering II

4-10-1: Biomedical Modeling I

4-10-2: Biomedical Modeling II

4-10-3: Biomedical Modeling III

4-10-4: Biomedical Modeling IV

4-10-5: Biomedical Modeling V

4-11-2: Musculoskeletal Biomechanics

4-11-3: Musculoskeletal and Sport Biomechanics

4-14-1: Biotransport

4-14-2: Heat Transfer and Fluid

Track OrganizersAhmed Al-Jumaily, Auckland University

of Technology, New Zealand Sara Wilson, University of Kansas,

United StatesLulu Wang, Hefei University of

Technology, China

Topic OrganizersAnil Saigal, Tufts University, United

States Seyed Allameh, Northern Kentucky Univ,

United States Karen Chang Yan, College of New

Jersey, United StatesXun Yu, New York Institute of

Technology, United States Maurizio Manzo, University of North

Texas, United States Shan Hu, Iowa State University, United

StatesMostafa Fatemi, Mayo Clinic, United

States Assimina Pelegri, Rutgers University,

United StatesXiaoning Jiang, NC State University,

United StatesCahit A Evrensel, Ankara University,

Turkey X. Gary Tan, U.S. Naval Research Lab,

United StatesDouglas E. Dow, Wentworth Institute of

Technology, United States Li-Hsin Han, Drexel University, United

States

Linxia Gu, University of Nebraska-Lincoln, United States

Shanzhong (Shawn) Duan, Saint Martin'sUniversity, United States

Yi Hua, University of Pittsburgh, UnitedStates

Reuben Kraft, Pennsylvania StateUniversity, United States

Karim Muci-Kuchler, South DakotaSchool of Mines and Technology,United States

Amit Bagchi, U.S. Naval ResearchLaboratory, United States

Dumitru Caruntu, University of Texas Rio Grande Valley, United States

Bogdan Epureanu, University ofMichigan, United States

Davide Piovesan, Gannon University,United States

Yuan Feng, Shanghai Jiao TongUniversity, China

Peyman Honarmandi, ManhattanCollege, United States

Parisa Saboori, Manhattan College,United States

Hai-Chao Han, University of Texas atSan Antonio, United States

Zhangli Peng, University of Notre Dame,United States

Ahmed Al-Jumaily, Auckland Universityof Technology, New Zealand

Toshihiko Shiraishi, Yokohama NationalUniversity, Japan

Takashi Saito, Yamaguchi University,Japan

Session OrganizersAnne Schmitz, Gannon University, United

States Ashfaq Adnan, University of Texas

Arlington, United StatesC.S. Florio, US Army ARDEC, United

StatesChao Liang, Praxair, Inc., United StatesDan Wang, Old Dominion University,

United StatesJunfei Tong, University of Nebraska

Lincoln, United StatesKalyani Nair, Bradley University, United

StatesLiandong Yu, Hefei University of

Technology, China Lara Thompson, University of the District

of Columbia, United StatesMargaret Nowicki, United States Military

Academy, United StatesMiri Weiss Cohen, Braude College of

Engineering, IsraelPing Zhao, Hefei University of

Technology, China Rika Carlsen, Robert Morris University,

United States Sikhanda S. Satapathy, ARL WMRD,

United StatesSouransu Nandi, University st Buffalo,

United States

TRACK 4 BIOMEDICAL & BIOTECHNOLOGYENGINEERINGWEDNESDAY, NOVEMBER 14

4-1 BIOMEDICAL AND BIOTECHNOLOGYPLENARY PRESENTATION4-1-1 Biomedical and Biotechnology Plenary IThird Floor, David L. Lawrence Convention Center, Room 303

9:00am–9:45am

9:00am – Acoustofluidics: Merging Acoustics andMicrofluidics for Biomedical ApplicationsPlenary Presentation. IMECE2018-90094Tony Jun Huang, Duke University, Durham, NC, United States

4-2 DAMAGE BIOMECHANICS4-2-4 Damage Biomechanics IV: Cavitation as aMechanism for Brain InjuryThird Floor, David L. Lawrence Convention Center, Room 309

10:00am–11:45am

Session Chair: Rika Carlsen, Robert Morris University, MoonTownship, PA, United States

Session Co-Chair: X. Gary Tan, U.S. Naval Research Lab,Washington, DC, United States

10:00am – Cavitation Nucleation in Tissue Simulant Due toMechanical ImpactTechnical Presentation. IMECE2018-88941Wonmo Kang, U.S. Naval Research Laboratory, Washington,DC, United States, Ashfaq Adnan, University of TexasArlington, Arlington, TX, United States, Amit Bagchi, U.S.Naval Research Laboratory, Washington, DC, United States

10:15am – Acceleration-Induced Pressure Gradient andCavitation in Soft Biomaterials During Mechanical ImpactTechnical Presentation. IMECE2018-88942Wonmo Kang, Marc Raphael, U.S. Naval ResearchLaboratory, Washington, DC, United States

10:30am – Computational Study of Cavitation Nucleation inGelatin Due to Impact and ShockTechnical Presentation. IMECE2018-89828Fuad Hasan, Siddarth Chintamani, Brian Dennis, Universityof Texas at Arlington, Arlington, TX, United States, AmitBagchi, Thomas O’Shaughnessy, Wonmo Kang, U.S. Naval Research Laboratory, Washington, DC, United States,Ashfaq Adnan, University of Texas Arlington, Arlington, TX,United States

10:45am – Computational Study of Mild Traumatic BrainInjury Due to Shock Induced Bubble Dynamics inViscoelastic Soft TissuesTechnical Presentation. IMECE2018-89820Fuad Hasan, Yuan Ting Wu, Ashfaq Adnan, University ofTexas at Arlington, Arlington, TX, United States

11:00am – Interfacial Shear Behavior of Collagen TripleHelix BundleTechnical Presentation. IMECE2018-89989Khandakar Mahmud, Yuan Ting Wu, Ashfaq Adnan,University of Texas Arlington, Arlington, TX, United States

4-8 DYNAMICS AND CONTROL OFBIOMECHANICAL SYSTEMS4-8-1 Dynamics and Control of BiomechanicalSystems IThird Floor, David L. Lawrence Convention Center, Room 310

10:00am–11:45am

Session Chair: Dumitru Caruntu, University of Texas Rio Grande Valley, Edinburg, TX, United States

Session Co-Chairs: Bogdan Epureanu, University of Michigan,Ann Arbor, MI, United States, Davide Piovesan, GannonUniversity, Erie, PA, United States

10:00am – Virtual Interaction Between Patients andOccupational Therapists Using an Assistive Robotic DeviceWith Cyber-Physical SystemTechnical Paper Publication. IMECE2018-87289Marvin Cheng, Embry-Riddle Aeronautical University,Morgantown, WV, United States, Po-Lin Huang, Hao-ChuanChu, Li-Han Peng, National Tsing Hua University, Hsinchu,Taiwan, Ezzat Bakhoum, University of West Florida,Pensacola, FL, United States

10:21am – Estimation of Hip and Ankle Visco-ElasticParameters During Quiet StandingTechnical Paper Publication. IMECE2018-87585Angel Cerda-Lugo, Alejandro González, UASLP, San LuisPotosi, Mexico, Antonio Cardenas, UASLP, San Luis Potosã ,Mexico, Davide Piovesan, Gannon University, Erie, PA, UnitedStates

10:42am – Viscoelastic Characterization of Woven Dacronfor Aortic Grafts by Using Direction-Dependent Quasi-Linear ViscoelasticityTechnical Paper Publication. IMECE2018-87806Eleonora Tubaldi, University of Arizona, Tucson, AZ, UnitedStates, Giovanni Ferrari, Prabakaran Balasubramanian, IvanBreslavskyi, Marco Amabili, McGill University, Montreal, QC,Canada

11:03am – 2-D Inverse Dynamics Knee Model: AligningAnatomical Knee Model With Squatting Kinematic DataUsing Ligament ForcesTechnical Paper Publication. IMECE2018-88123Jose M. Salinas, Dumitru Caruntu, University of Texas Rio Grande Valley, Edinburg, TX, United States

11:24am – A Dynamic Escape Problem of Molecular MotorsTechnical Paper Publication. IMECE2018-88612Dean Culver, Army Research Laboratory, Durham, NC, UnitedStates, Bryan Glaz, Army Research LaboratoryUnited States, Samuel C. Stanton, US Army ResearDurham, NC, United States

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – WEDNESDAY, NOVEMBER 14

39

4-10 COMPUTATIONAL MODELING INBIOMEDICAL APPLICATIONS4-10-1 Biomedical Modeling IThird Floor, David L. Lawrence Convention Center, Room 311

10:00am–11:45am

Session Chair: Yi Hua, University of Pittsburgh, Pittsburgh, PA,United States

Session Co-Chair: Chao Liang, Praxair, Inc., Tonawanda, NY,United States

10:00am – Hydrodynamic Recruitment of Leukocytes IsInfluenced by Adherent Cell MorphologyTechnical Paper Publication. IMECE2018-86502Dhananjay Subramaniam, University of Cincinnati, Cincinnati,OH, United States, David Gee, Gannon University, Erie, PA,United States

10:21am – Finite Element Modeling of Crimping and Sealingof Metallic Braided Stents for Endovascular Repair (EVAR)Technical Presentation. IMECE2018-87025Jayendiran Raja, Texas A&M University, Doha, Doha, Qatar,Annie Ruimi, Texas A&M University at Qatar, College Station,TX, United States, Bakr Nour, Weill Cornell Medicine, Doha,Doha, Qatar

10:42am – Degradation Modeling of Bioabsorbable PolymerStentTechnical Paper Publication. IMECE2018-88116Pengfei Dong, Longzhen Wang, Linxia Gu, University ofNebraska–Lincoln, Lincoln, NE, United States

11:03am – Multiscale and Multiphysics Modeling ofThrombus Biomechanics in CirculationTechnical Presentation. IMECE2018-88761Alireza Yazdani, George Karniadakis, Brown University,Providence, RI, United States

11:24am – Numerical Study of Passive Micromixers for DNAAnalysisTechnical Presentation. IMECE2018-89133Ritesh Agarwal, Tarek Abdel-Salam, Stephanie George,East Carolina University, Greenville, NC, United States

4-11 MUSCULOSKELETAL AND SPORTSBIOMECHANICS4-11-1 Sports Related Brain Injury and ModelingThird Floor, David L. Lawrence Convention Center, Room 315

10:00am–11:45am

Session Chair: Yuan Feng, Shanghai Jiao Tong University,Shanghai, China

Session Co-Chair: Parisa Saboori, Manhattan College,Riverdale, NY, United States

10:00am – Development of a Low-Cost Mechanical Modelof a Human HeadTechnical Paper Publication. IMECE2018-87129Grace Foltz, Elizabeth Tillotson, Beth Todd, University ofAlabama, Tuscaloosa, AL, United States

10:21am – Study of Head Concussions on Female SoccerPlayersTechnical Paper Publication. IMECE2018-88347Peyman Honarmandi, Alessandra Palmisano, ManhattanCollege, Riverdale, NY, United States, Iryna Stashuk, CityCollege of New York, New York, NY, United States, ShawnLadda, Manhattan College, Riverdale, NY, United States

10:42am – Neck Loading Model of a Child in a Car SeatTechnical Paper Publication. IMECE2018-88363Parisa Saboori, Gregory Bohn, Caitlin Hall, KathiaCoronado, Veronica Valerio, Manhattan College, Riverdale,NY, United States

11:03am – A New Scaling Relationship Between Humanand Mouse Brain to Study ConcussionTechnical Presentation. IMECE2018-90033Haojie Mao, Western University, Detroit, MI, United States,Lihong Lu, Kewei Bian, Western University, London, ON,Canada

11:24am – Age Related Brain Atrophy and Vulnerability toTBITechnical Presentation. IMECE2018-87498Arpad Bakonyi, Alan Faitelewicz, Siavash Hashemi, ShahabMansoorbaghaei, City College of New York, New York, NY,United States, Ali Sadegh, City University of New York, NewYork, NY, United States

4-3 VIBRATION AND ACOUSTICS INBIOMEDICAL APPLICATIONS4-3-1 Vibration Characteristics andCharacterisationsThird Floor, David L. Lawrence Convention Center, Room 309

1:45pm–3:30pm

Session Chair: Ping Zhao, Hefei University of Technology,Hefei, China

Session Co-Chair: Toshihiko Shiraishi, Yokohama NationalUniversity, Yokohama, Japan

1:45pm – Acoustic Radiation of Axially Stepped-ThicknessPiezoelectric Cylindrical ShellsTechnical Paper Publication. IMECE2018-86306Ata Meshkinzar, Ahmed M. Al-Jumaily, Auckland Universityof Technology, Auckland, New Zealand

2:06pm – Investigation of the Scattering of FocusedUltrasonic Waves at BonesTechnical Paper Publication. IMECE2018-87133Christoph Schaal, Vibhav Durgesh, California StateUniversity, Northridge, CA, United States

2:27pm – Influence of Brain Cooling on FrequencyCharacteristics of the Epileptic Focus and Its SurroundingAreaTechnical Paper Publication. IMECE2018-87288Saya Kumano, Yamaguchi University TakashiSaito, Yamagu KenyuUehara, Y


40

2:48pm – Determination of Mechanical Properties ofHuman Skull With Modal AnalysisTechnical Paper Publication. IMECE2018-88103Ashkan Eslaminejad, Mohammad Hosseini Farid,Mohammadreza Ramzanpour, Mariusz Ziejewski, GhodratKarami, North Dakota State University, Fargo, ND, UnitedStates

4-8 DYNAMICS AND CONTROL OFBIOMECHANICAL SYSTEMS4-8-2 Dynamics and Control of BiomechanicalSystems IIThird Floor, David L. Lawrence Convention Center, Room 310

1:45pm–3:30pm

Session Chair: Davide Piovesan, Gannon University, Erie, PA,United States

Session Co-Chairs: Dumitru Caruntu, University of Texas Rio Grande Valley, Edinburg, TX, United States, Bogdan Epureanu, University of Michigan, Ann Arbor, MI,United States

1:45pm – Develop a Flexible Regenerative Exoskeleton toAssist WalkingTechnical Paper Publication. IMECE2018-86779Longhan Xie, Xiaodong Li, South China University ofTechnology, Guangzhou, China

2:06pm – Is Linear Camera Space Manipulation Imperviousto Systematic Distortions?Technical Paper Publication. IMECE2018-87645Felipe Martinez, UASLP, San Luis Potosi, Mexico, AdamMihalko, Lillian Blum, Gannon University, Erie, PA, UnitedStates, Antonio Cardenas, UASLP, San Luis Potosã, Mexico,Davide Piovesan, Gannon University, Erie, PA, United States

2:27pm – Robust and Iterative Learning Control ofAgonist/Antagonist PairTechnical Presentation. IMECE2018-87939Patrick J. Schimoler, Allegheny General Hospital, Pittsburgh,PA, United States, Jeffrey S. Vipperman, University ofPittsburgh, Pittsburgh, PA, United States, Mark Carl Miller,Allegheny General Hospital, Pittsburgh, PA, United States

2:48pm – Design of Robotic System for CognitiveRehabilitation Based on Machine VisionTechnical Presentation. IMECE2018-88909Haodong Chen, Ping Zhao, Kangren Zhao, Wenxiu Chen,Hefei University of Technology, Hefei, Anhui, China

3:09pm – Design and Evaluation of Controllers for anElastically Strapped Lower Extremity ExoskeletonTechnical Presentation. IMECE2018-89965Xianlian Zhou, New Jersey Institute of Technology, Newark,NJ, United States, Xinyu Chen, CFD Research Corporation,Huntsville, AL, United States

4-10 COMPUTATIONAL MODELING INBIOMEDICAL APPLICATIONS4-10-2 Biomedical Modeling IIThird Floor, David L. Lawrence Convention Center, Room 311

1:45pm–3:30pm

Session Chair: Yi Hua, University of Pittsburgh, Pittsburgh, PA,United States


1:45pm – Evaluation of Soft Material Fracture Behavior viaIndentation Testing With a Needle-Like IndenterTechnical Paper Publication. IMECE2018-87199Takayuki Ishino, Atsushi Sakuma, Kyoto Institute ofTechnology, Kyoto, Japan

2:06pm – Validation of a Finite Element Model of theMechanical Performance of Surgical Knots of VaryingTopologyTechnical Paper Publication. IMECE2018-87868Arz Y. Qwam Alden, Andrew G. Geeslin, Peter A. Gustafson,Western Michigan University, Kalamazoo, MI, United States

2:27pm – The Influence of Primary Blast Wave on thePosterior Part of the EyeballTechnical Paper Publication. IMECE2018-88113Junfei Tong, Linxia Gu, University of Nebraska–Lincoln,Lincoln, NE, United States

2:48pm – A Computational Model of Continuous HollowCerebrovascular Arterioles Using a Fractal L-SystemTechnical Paper Publication. IMECE2018-88511Nicolas Cuitino, Rutgers University, Piscataway, NJ, UnitedStates, Assimina Pelegri, Rutgers University, East Brunswick,NJ, United States, Benjamin Johannesson, BoyceTechnologies, Long Island City, NJ, United States

3:09pm – A Machine Learning Approach for IntraoperativeReconstruction of Soft TissueTechnical Presentation. IMECE2018-89929Ye Han, Qi Wang, Yoed Rabin, Levent Burak Kara, CarnegieMellon University, Pittsburgh, PA, United States


41

4-11 MUSCULOSKELETAL AND SPORTSBIOMECHANICS4-11-2 Musculoskeletal BiomechanicsThird Floor, David L. Lawrence Convention Center, Room 315

1:45pm–3:30pm

Session Chair: Peyman Honarmandi, Manhattan College,Riverdale, NY, United States

Session Co-Chair: Yuan Feng, Shanghai Jiao Tong University,Shanghai, China

1:45pm – Evaluation of ACL Insertion Site LoadTransmissionTechnical Presentation. IMECE2018-86829Michael Smolinski, Brandon Marshall, Monica Linde,Freddie H. Fu, Patrick Smolinski, William Slaughter,University of Pittsburgh, Pittsburgh, PA, United States

2:06pm – Prophylactic Brace Design to Prevent ACLInjuriesTechnical Presentation. IMECE2018-88393Gregory Bohn, Parisa Saboori, Manhattan College, Riverdale,NY, United States, Lorraine Piccorelli, Manhattan College,Bronx, NY, United States

2:27pm – ACL Graft Position in the TunnelTechnical Presentation. IMECE2018-86835Junjun Zhu, Brandon Marshall, Xin Tang, Weimin Zhu,Michael Smolinski, Joon Ho Wang, Monica Linde, FreddieH. Fu, Patrick Smolinski, University of Pittsburgh, Pittsburgh,PA, United States

2:48pm – A Misoriented Biceps Tendon Repair Has NoEffect on StrengthTechnical Presentation. IMECE2018-87415Sean Delserro, University of Pittsburgh, Pittsburgh, PA, United States, Tyler Madonna, Rehab Neural EngineeringLabs, Pittsburgh, PA, United States, Stephen Liu, PennOrthopaedics, Exton, PA, United States, Michael Smolinski,University of Pittsburgh, Pittsburgh, PA, United States, Joseph Styron, Cleveland Clinic, Cleveland, OH, UnitedStates, Nicholas Vaudreuil, Brandon Brown, PatrickSmolinski, Mark Miller, University of Pittsburgh, Pittsburgh,PA, United States, Christopher Schmidt, OrthopaedicSpecialists, Pittsburgh, PA, United States

3:09pm – Assessing Non-Uniform Stiffening of the AchillesTendon Noninvasively Using Surface Wave ElastographyTechnical Presentation. IMECE2018-89879Muhammad Salman, Kennesaw State University, Marietta,GA, United States, Karim Sabra, Georgia Institute ofTechnology, Marietta, GA, United States

4-3 VIBRATION AND ACOUSTICS INBIOMEDICAL APPLICATIONS4-3-2 Vibration Applications to Therapy andRehabilitationThird Floor, David L. Lawrence Convention Center, Room 309

3:45pm–5:30pm

Session Chair: Takashi Saito, Yamaguchi University, Ube/Yamaguchi, Japan

Session Co-Chair: Toshihiko Shiraishi, Yokohama NationalUniversity, Yokohama, Japan

3:45pm – Design of Planar 1-DOF RehabilitationMechanisms via Kinematic-Mapping Motion SynthesisFrameworkTechnical Presentation. IMECE2018-88785Ping Zhao, Kangren Zhao, Wenxiu Chen, Haodong Chen,Hefei University of Technology, Hefei, China

4:06pm – Fluid Impact Under Various Tapping Conditionsfor Biomedical Application (Shirodhara)Technical Paper Publication. IMECE2018-87341Swathika M., Lakshmana Rao C., BalasubramanianVenkatesh, Indian Institute of Technology Madras, Chennai,Tamil Nadu, India

4:27pm – A Study of a Mechanism of Cell ProliferationPromotion of Cultured Osteoblasts by Mechanical VibrationTechnical Paper Publication. IMECE2018-87364Toshihiko Shiraishi, Akitoshi Nishijima, Yokohama NationalUniversity, Yokohama, Japan

4:48pm – Experimental Identification of Model Parametersand the Statistical Processing Using a Nonlinear OscillatorApplied to EEG AnalysisTechnical Paper Publication. IMECE2018-88112Kenyu Uehara, Yamaguchi University, Ube, Japan, TakashiSaito, Yamaguchi University, Ube/Yamaguchi, Japan

4-4 BIOMEDICAL IMAGING AND TISSUECHARACTERIZATION4-4-1 Tissue CharacterisationsThird Floor, David L. Lawrence Convention Center, Room 308

3:45pm–5:30pm

Session Chair: Margaret Nowicki, United States MilitaryAcademy, West Point, NY, United States

Session Co-Chair: Xiaoning Jiang, NC State University,Raleigh, NC, United States

3:45pm – Relating Bone Intra-Cortical Elastic Stiffness toEDX Spectroscopy Mineralization MeasurementsTechnical Paper Publication. IMECE2018-86233Ilige Hage, Remi Hage, Notre Dame University-Louaize, ZoukMosbeh, Lebanon, Charbel Seif, American University of Beirut,Beirut, Lebanon, Ramsey Hamade, American University ofBeirut, Beirut, Riad El Solh, Lebanon


42

4:06pm – Human Mandibular Bone Density Distribution:Image Analysis and Patient-Specific Bone RemodelingSimulationTechnical Presentation. IMECE2018-86866Kangning Su, Kayla Reigh, Pennsylvania State University,State College, PA, United States, Li Yuan, Shenzhen People’sHospital, 2nd Clinical Medical College of Jinan University,Shen Zhen, China, Jie Yang, Temple University, Philadelphia,PA, United States, Jing Du, Pennsylvania State University,State College, PA, United States

4:27pm – A Modular Test Platform for MicromechanicalTensile Testing of Soft BiomaterialsTechnical Paper Publication. IMECE2018-87259Wilson Eng, Max Kim, Anand Ramasubramanian, Sang-Joon (John) Lee, San Jose State University, San Jose, CA,United States

4:48pm – Compliance Effect on the Flow Condition inVascular In Vitro ExperimentsTechnical Paper Publication. IMECE2018-87362Masami Matsuura, Simon Tupin, Makoto Ohta, TohokuUniversity, Sendai, Miyagi, Japan

5:09pm – Temporal Evolution of Abdominal Aortic WallStress Using Image-Based Vascular MechanicalCharacterization (iV-MeCh) TechniqueTechnical Presentation. IMECE2018-88275Prahlad Menon, University of Pittsburgh, Pittsburgh, PA,United States, Mirunalini. Thirugnanasambandam, Universityof Texas at San Antonio, San Antonio, TX, United States,Stephane Avril, Ecole Nationale Supérieure Des Mines, Saint-Etienne, France, Ender Finol, Senol Piskin, Tejas Canchi,University of Texas at San Antonio, San Antonio, TX, UnitedStates, Christof Karmonik, The Methodist Hospital, Houston,TX, United States, Soroosh Sanatkhani, University ofPittsburgh, Pittsburgh, PA, United States

4-8 DYNAMICS AND CONTROL OFBIOMECHANICAL SYSTEMS4-8-3 Dynamics and Control of BiomechanicalSystems IIIThird Floor, David L. Lawrence Convention Center, Room 310

3:45pm–5:30pm

Session Chair: Dumitru Caruntu, University of TexasRio Grande Valley, Edinburg, TX, United States

Session Co-Chairs: Davide Piovesan, Gannon University, Erie,PA, United States, Souransu Nandi, University at Buffalo, StateUniversity of New York, Buffalo, NY, United States, Dan Wang,Old Dominion University, Norfolk, VA, United States

3:45pm – Arterial Wall Motion and its Dynamic Modeling forArterial Stiffness and DampingTechnical Paper Publication. IMECE2018-86883Dan Wang, Linda Vahala, Thomas Alberts, Old DominionUniversity, Norfolk, VA, United States, Zhili Hao, Old DominionUniversity, Virginia Beach, VA, United States

4:06pm – Material and Posture Modeling for Sleeping onSoft Low-Density Porous MaterialTechnical Paper Publication. IMECE2018-87249Takahiro Yamaguchi, Hajime Kimura, Atsushi Sakuma,Kyoto Institute of Technology, Kyoto, Japan, KazushigeTakahashi, Shigetoshi Mimura, Toyo Quality OneCorporation, Kawagoe, Japan

4:27pm – Hypo/Hyperglycemic Constrained Design of IVInsulin Control for Type 1 Diabetic Patients With Meal andInitial Condition Uncertainties Using Sequential QuadraticProgrammingTechnical Paper Publication. IMECE2018-87742Souransu Nandi, Tarunraj Singh, University at Buffalo, State University of New York, Buffalo, NY, United States

4:48pm – Chance Constraint Based Design of IV InsulinControl for Type 1 Diabetic Patients Under Model and MealUncertaintiesTechnical Paper Publication. IMECE2018-87759Souransu Nandi, Tarunraj Singh, University at Buffalo, StateUniversity of New York, Buffalo, NY, United States

4-10 COMPUTATIONAL MODELING INBIOMEDICAL APPLICATIONS4-10-3 Biomedical Modeling IIIThird Floor, David L. Lawrence Convention Center, Room 311

3:45pm–5:30pm

Session Chair: Junfei Tong, University of Nebraska–Lincoln,Lincoln, NE, United States


3:45pm – Fluid-Structure Interaction of Blood Flow inHuman Aorta Under Dynamic Conditions: A NumericalApproachTechnical Paper Publication. IMECE2018-87793Massimo Milani, Francesca Martelli, Luca Montorsi,University of Modena and Reggio Emilia, Reggio Emilia, Italy,Guido Ligabue, Pietro Torricelli, University of Modena andReggio Emilia, Modena, Italy

4:06pm – Reconstruction of Swirling Blood Flow in theHeart and Aorta on the Basis of Measurements of DynamicGeometry and Elastic Properties of the Flow ChannelTechnical Paper Publication. IMECE2018-87680Eugeny Talygin, Shota Zhorzholiani, Marina Tkhagapsova,Yuriy Tsygankov, Andrey Agafonov, Alexander Gorodkov,Gennadiy Kiknadze, Leo Bockeria, Bakulev Research Centerfor Cardiovascular Surgery, Moscow, Russia

4:27pm – Virtual Septoplasty Using Computational FluidDynamicsTechnical Presentation. IMECE2018-88153Masoud Ghorbani Moghaddam, Medical College ofWisconsin, Milwaukee, WI, United States, Julia S. Kimbell,University of North Carolina, Chapel Hill, NC, United States,Dennis O. Frank-Ito, Duke UniversityStates, John S. Rhee, Guilherme J.M. Garcia, Medical


43

4:48pm – Comparison of Ablation Volume Produced WithMulti-Tine Dry Type and Wet Type Electrodes During RadioFrequency Ablation: An In Vitro StudyTechnical Paper Publication. IMECE2018-88588Sundeep Singh, Ramjee Repaka, Indian Institute ofTechnology Ropar, Rupnagar, Punjab, India

5:09pm – Spatiotemporal Organization of Excitation andMechanical Waves During Life-Threatening Re-EntrantCardiac ArrhythmiasTechnical Presentation. IMECE2018-89458Amirhossein Molavi Tabrizi, Ata Mesgarnejad, NortheasternUniversity, Boston, MA, United States, Jan Christoph,Stephan Luther, Max Planck Institute for Dynamics and Self-Organization, Göttingen, Germany, Maher N. Bazzi, Universityof Kansas School of Medicine-Wichita, Wichita, KS, UnitedStates, Alain Karma, Northeastern University, Boston, MA,United States

4-11 MUSCULOSKELETAL AND SPORTSBIOMECHANICS4-11-3 Musculoskeletal and Sport BiomechanicsThird Floor, David L. Lawrence Convention Center, Room 315

3:45pm–5:30pm

Session Chair: Parisa Saboori, Manhattan College, Riverdale,NY, United States

Session Co-Chair: Peyman Honarmandi, Manhattan College,Riverdale, NY, United States

3:45pm – Anteior Cruciate Ligament Graft-Tunnel RelativeMotionTechnical Presentation. IMECE2018-86816Junjun Zhu, Brandon Marshall, Xin Tang, Weimin Zhu,Michael Smolinski, Monica Linde, Joon Ho Wang, FreddieH. Fu, Patrick Smolinski, University of Pittsburgh, Pittsburgh,PA, United States

4:06pm – Finite Element Analysis of Dynamics of HumanMuscle Compressed by Fabric SleeveTechnical Paper Publication. IMECE2018-87304Shodai Ueda, Atsushi Sakuma, Kyoto Institute of Technology,Kyoto, Japan

4:27pm – Assessment of Muscle Stiffness while UsingSingle Axis AccelerometersTechnical Presentation. IMECE2018-89728Carlos Munoz, Muhammad Salman, Kennesaw StateUniversity, Marietta, GA, United States

4:48pm – Computational Prediction of NeckMusculoskeletal Loading in Walking and Running withHead Supported MassTechnical Presentation. IMECE2018-89808Xianlian Zhou, New Jersey Institute of Technology, Newark,NJ, United States, Xinyu Chen, Paulien Roos, Phillip Whitley,CFD Research Corporation, Huntsville, AL, United States

5:09pm – Gait Analysis for Muscular Forces Evaluation inHuman Movement: Integration Protocol of TypicalMeasurement MethodsTechnical Paper Publication. IMECE2018-87670Massimo Milani, Luca Fontanili, Luca Montorsi, University ofModena and Reggio Emilia, Reggio Emilia, Italy, GiordanoValente, Medical Technology Laboratory, Rizzoli OrthopaedicInstitute, Bologna, Italy


44


4-1 BIOMEDICAL AND BIOTECHNOLOGYPLENARY PRESENTATION4-1-2 Biomedical and Biotechnology Plenary IIThird Floor, David L. Lawrence Convention Center, Room 304

8:00am–8:45am

8:00am – New Directions in Medical UltrasoundPlenary Presentation. IMECE2018-90095Mostafa Fatemi, Mayo Clinic, Rochester, MN, United States

4-4 BIOMEDICAL IMAGING AND TISSUECHARACTERIZATION4-4-2 Biomedical Imaging and CharacterizationThird Floor, David L. Lawrence Convention Center, Room 308

8:55am–10:40am

Session Chair: Mostafa Fatemi, Mayo Clinic, Rochester, MN,United States

Session Co-Chair: Assimina Pelegri, Rutgers University, EastBrunswick, NJ, United States

8:55am – Analysis of High Frequency Ultrasound PowerSpectrum Peak Density for Detecting Soft TissueMicrostructure/PathologyTechnical Presentation. IMECE2018-86568Jeremy Stromer, University of Connecticut, Storrs, CT, UnitedStates, Koushik Paul, Jorge Fernandez Losada, Leila Ladani,University of Texas at Arlington, Arlington, TX, United States

9:10am – Deep Convolutional Neural Networks for BreastImage Analysis on Holographic Microwave ImagingTechnical Paper Publication. IMECE2018-86765Lulu Wang, Jinzhang Xu, Hefei University of Technology,Hefei, China

9:25am – Investigating the Progression of Alzheimer’sDisease Using Digital Volume Correlation Algorithm andStrain as a MetricTechnical Paper Publication. IMECE2018-87563Annastacia McCarty, Sarah Bentil, Iowa State University,Ames, IA, United States

9:40am – Temporal Evolution of the Walls of Elastase-Induced Rabbit AneurysmsTechnical Presentation. IMECE2018-88290Chao Sang, University of Pittsburgh, Pittsburgh, PA, UnitedStates, David F. Kallmes, Mayo Clinic, Rochester, MN, UnitedStates, Simon C. Watkins, Anne M. Robertson, University ofPittsburgh, Pittsburgh, PA, United States

9:55am – A Computational Simulation of Brain White MatterAccounting for Structural Anisotropy in Frequency DomainTechnical Presentation. IMECE2018-88488Xuehai Wu, Daniel Sullivan, Rutgers University, Piscataway,NJ, United States, John Georgiadis, University of Illinois atUrbana-Champaign, Urbana, IL, United States, AssiminaPelegri, Rutgers University, East Brunswick, NJ, United States

10:10am – Optical Microlaser Sensing Devices for BrainActivity MonitoringTechnical Presentation. IMECE2018-89316Maurizio Manzo, University of North Texas, Denton, TX,United States

4-5 BIOMATERIALS AND TISSUE:MODELLING, SYNTHESIS, FABRICATIONAND CHARACTERIZATION4-5-1 Biomaterials and Tissue I: FabricationThird Floor, David L. Lawrence Convention Center, Room 309

8:55am–10:40am

Session Chair: Anil Saigal, Tufts University, Medford, MA,United States

Session Co-Chair: Seyed Allameh, Northern KentuckyUniversity, Newport, KY, United States

8:55am – Stretch-and-Folding Method to Mass ProduceBiomedical NanofibersTechnical Presentation. IMECE2018-87975Mingkun Wang, Lanziye He, Chunxiao Cui, Li-Hsin Han,Drexel University, Philadelphia, PA, United States

9:16am – Effect of Laser Texturing and Plasma Nitriding onTitaniumTechnical Presentation. IMECE2018-89446Mohammad Hossan, Morshed Khandaker, University ofCentral Oklahoma, Edmond, OK, United States

9:37am – In Situ Contactless 3D Printing of CellularStructuresTechnical Presentation. IMECE2018-89651Sarah Mishriki, Abdel Rahman Abdel Fattah, Elvira Meleca, McMaster University, Hamilton, ON, Canada,Tobias Kammann, Friedrich Schiller University Jena, Jena,Germany, Rakesh Sahu, Fei Geng, Ishwar K. Puri, McMasterUniversity, Hamilton, ON, Canada

9:58am – Biofabrication of Zonally-Stratified Construct forCartilage RepairTechnical Presentation. IMECE2018-89682Yang Wu, Pennsylvania State University, State College, PA,United States, Aman Dhawan, Pennsylvania State University,Hershey, PA, United States, Ibrahim Ozbolat, PennsylvaniaState University, University Park, PA, United States

10:19am – A New Aspiration-Assisted BioprintingTechnique for Tissue BiofabricationTechnical Presentation. IMECE2018-89799Bugra Ayan, Dong Nyoung Heo, Madhuri Dey, AdomasPavilianskas, Zhifeng Zhang, Mecit Altan Alioglu, Corina S.Drapaca, Ibrahim Ozbolat, Pennsylvania State University,University Park, PA, United States

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – THURSDAY, NOVEMBER 15

45

4-7 BIOMEDICAL DEVICES4-7-1 Detection and Monitoring Biomedical DevicesThird Floor, David L. Lawrence Convention Center, Room 310

8:55am–10:40am

Session Chair: Margaret Nowicki, United States MilitaryAcademy, West Point, NY, United States


8:55am – Design and Validation of a Low-Cost Non-InvasiveDevice to Detect Overnight HypoglycemiaTechnical Paper Publication. IMECE2018-86009Jonathan Lesko, Stephen Seibert, Yong Zhu, WilkesUniversity, Wilkes-Barre, PA, United States

9:16am – Design and Validation of a Low-Cost Heart HealthMonitoring DeviceTechnical Paper Publication. IMECE2018-86031Nuzhat Ahmed, Lucas Kline, Yong Zhu, Wilkes University,Wilkes-Barre, PA, United States

9:37am – A Numerical Study of the Influence of DifferentFactors on Mechanical Characterization of Tumors via a 2DTactile SensorTechnical Paper Publication. IMECE2018-87669Zhili Hao, Cristina Genoese-Zerbi, Old Dominion University,Virginia Beach, VA, United States, James Jobe, Old DominionUniversity, Williamsburg, VA, United States, Kylee Kohl, OldDominion University, Virginia Beach, VA, United States, NathanAbshier, Timothy Watjen, Old Dominion University, Norfolk,VA, United States, Charles Tison, Old Dominion University,Virginia Beach, VA, United States

9:58am – Smartphone-Based Device for MonitoringChemical Pollutants in WaterTechnical Paper Publication. IMECE2018-86893Samuel Ozeh, Purdue University Northwest, Hammond, IN,United States, A. G. Agwu Nnanna, University of Texas of thePermian Basin, Odessa, TX, United States, Justus C.Ndukaife, Vanderbilt University, Nashville, TN, United States

10:19am – A Small Radio Frequency Sensor for MicrowaveTumor AblationTechnical Paper Publication. IMECE2018-86766Lulu Wang, Hefei University of Technology, Hefei, China,Mengke Ge, Bensheng Qiu, University of Science andTechnology of China, Hefei, China

4-10 COMPUTATIONAL MODELING INBIOMEDICAL APPLICATIONS4-10-4 Biomedical Modeling IVThird Floor, David L. Lawrence Convention Center, Room 311

8:55am–10:40am

Session Chair: Shanzhong (Shawn) Duan, Saint Martin’sUniversity, Lacey, WA, United States


8:55am – Monte Carlo Simulation of the Laser-InducedTemperature Dynamics in Very Thin Scattering andAbsorbing Biological Layer PilesTechnical Paper Publication. IMECE2018-86545Reginald Eze, City University of New York, Long Island City,NY, United States

9:10am – Patellofemoral Pain Syndrome: SensitivityAnalysis of Muscle Parameters for Expedited RecoveryUtilizing an OpenSim Model for Lower ExtremitiesTechnical Paper Publication. IMECE2018-87042Adam Novotny, Manish Paliwal, The College of New Jersey,Ewing, NJ, United States

9:25am – Computational Modeling of Coagulopathy forDecision SupportTechnical Paper Publication. IMECE2018-87683Brandon Saltsman, Carey Balaban, Jeffrey S. Vipperman,University of Pittsburgh, Pittsburgh, PA, United States

9:40am – A Stochastic Finite Element Method forSimulating Trabecular BoneTechnical Paper Publication. IMECE2018-87869Saif Alrafeek, James R. Jastifer, Peter A. Gustafson,Western Michigan University, Kalamazoo, MI, United States

9:55am – A Biomechanical and Thermal Analysis for BoneAugmentation of the Proximal FemurTechnical Paper Publication. IMECE2018-88583Amirhossein Farvardin, Mahsan Bakhtiarinejad, MichaelPozin, Mehran Armand, Johns Hopkin University, Baltimore,MD, United States

10:10am – Thermal Analysis of Marginal Conditions toFacilitate Cryopreservation by VitrificationTechnical Presentation. IMECE2018-89607Purva Joshi, Yoed Rabin, Carnegie Mellon University,Pittsburgh, PA, United States


46

4-14 BIOTRANSPORT (FLUID. HEAT ANDMASS)4-14-1 BiotransportThird Floor, David L. Lawrence Convention Center, Room 315

8:55am–10:40am

Session Chair: Anne Schmitz, Gannon University, Erie, PA,United States

Session Co-Chair: Cahit A. Evrensel, Ankara University,Ankara, Turkey

8:55am – Efficient Uncertainty Quantification forBiotransport in Tumors With Uncertain Material PropertiesTechnical Paper Publication. IMECE2018-86216Alen Alexanderian, William Reese, Ralph C. Smith, North Carolina State University, Raleigh, NC, United States,Meilin Yu, University of Maryland Baltimore County, Baltimore,MD, United States

9:16am – Influence of Non-Newtonian Rheology on MassTransfer From a Biofluid in Separated and ReattachedFlowsTechnical Paper Publication. IMECE2018-86809Khaled J. Hammad, Central Connecticut State University,Simsbury, CT, United States

9:37am – CFD Model of White Thrombus Formation by HighShear Blood Flows With Consideration of TransportProcess of Concentration and Aggregation Process, andRelated Thrombus VisualizationTechnical Presentation. IMECE2018-88379Masaaki Tamagawa, Kyushu Institute of Technology,Kitakyushu, Japan

9:58am – Optimum Frequency Range for Enhancing CoughClerance Through Flow OscillationsTechnical Presentation. IMECE2018-89987Duygu L. Tuna, Altay Ünal, Fikret Ari, Ankara University,Ankara, Turkey, Peter Krumpe, University of Nevada, Reno,NV, United States, Cahit A. Evrensel, Ankara University,Ankara, Turkey

10:19am – Eletrokinetic Remediation of Contaminated SoilsWith ChromiumTechnical Paper Publication. IMECE2018-87552André Ribeiro, Jorge Araújo, CVR—Centro para a Valorizaçãode Resíduos, Guimarães, Portugal, Cândida Vilarinho, JoanaCarvalho, University of Minho, Guimarães, Portugal

4-2 DAMAGE BIOMECHANICS4-2-3 Damage Biomechanics III: MaterialsCharacterization, Modeling and AnalysisThird Floor, David L. Lawrence Convention Center, Room 308

10:50am–12:35pm

Session Chair: Sikhanda S Satapathy, ARL WMRD, APG, MD,United States

Session Co-Chair: Karim Muci-Kuchler, South Dakota Schoolof Mines and Technology, Rapid City, SD, United States

10:50am – Brain Tissue Material and Damage Properties forBlast TraumaTechnical Paper Publication. IMECE2018-88419Soroush Assari, Kurosh Darvish, Temple University,Philadelphia, PA, United States

11:05am – Characterization of Injured Brain Tissue AfterControlled Cortical Impact (CCI) Using a Mouse ModelTechnical Presentation. IMECE2018-86109Suhao Qiu, Shanghai Jiao Tong University, Shanghai, China,Wei Chen, Shanshan Qiu, Jianfeng Zeng, Mingyuan Gao,Luyang Tao, Soochow University, Suzhou, China, AnkushAggarwal, Swansea University, Swansea, United Kingdom,Chung-Hao Lee, University of Oklahoma, Norman, OK, UnitedStates, Yuan Feng, Shanghai Jiao Tong University, Shanghai,China

11:20am – A Comparison of Neuronal MembraneMechanoporation Strain Behavior forDilauroylphosphatidylcholine (DLPC) and 1-Palmitoyl-2-Oleoylphosphatidylcholine (POPC) PhospholipidsTechnical Presentation. IMECE2018-89831Folly Crawford, Michael Murphy, Mississippi State University,Starkville, MS, United States, S. Mun, Mississippi StateUniversity, Mississippi State, MS, United States, R.K. Prabhu,Mississippi State University, Starkville, MS, United States

11:35am – Failure and Damage of Mineralized Tissue UnderTensionTechnical Presentation. IMECE2018-89207Rizacan Sarikaya, Anil Misra, University of Kansas,Lawrence, KS, United States

11:50am – A Non-Linear Multi-Axial Fatigue Damage Modelfor the Intervertebral Disc AnnulusTechnical Presentation. IMECE2018-89755Adhitya Vikraman Subramani, Pennsylvania State University,University Park, PA, United States, Shruti Motiwale, TeslaMotors, Palo Alto, CA, United States, Xianlian Zhou, CFDRC,Huntsville, AL, United States, Reuben Kraft, PennsylvaniaState University, University Park, PA, United States

12:05pm – Towards a Better Understanding of Optic NerveBiomechanics Using a Multimaterial Finite Element ModelTechnical Presentation. IMECE2018-89874Rika Carlsen, Robert Morris University, Moon Township, PA,United States, Anirban Jana, PittsburCenter, Carnegie Mellon University, Pittsburgh, PA, UnitedStates


47

4-5 BIOMATERIALS AND TISSUE:MODELLING, SYNTHESIS, FABRICATIONAND CHARACTERIZATION4-5-2 Biomaterials andTissue II: ModellingThird Floor, David L. Lawrence Convention Center, Room 309

10:50am–12:35pm

Session Chair: Seyed Allameh, Northern Kentucky University,Newport, KY, United States

Session Co-Chair: Karen Chang Yan, The College of NewJersey, Ewing Township, NJ, United States

10:50am – Cellular Automaton and Finite Element HybridSimulation to Predict Axonal Extension Enhancement ofNerve Cell Under Mechanical StimulationTechnical Paper Publication. IMECE2018-86653Shota Takeda, Yoshihiro Tomita, Eiji Nakamachi, DoshishaUniversity, Kyotanabe, Kyoto, Japan

11:11am – Some Considerations for Hyperelastic Modelingof the Brain TissueTechnical Presentation. IMECE2018-87072Aref Samadi-Dooki, George Voyiadjis, Louisiana StateUniversity, Baton Rouge, LA, United States

11:32am – On Continuum Based Multiscale Modelling ofEngineered Soft Tissue ConstructsTechnical Paper Publication. IMECE2018-88482Karen Chang Yan, The College of New Jersey, EwingTownship, NJ, United States, Jacob Bennedsen, The Collegeof New Jersey, Lebanon, NJ, United States

11:53am – Brazier Buckling in Grain Stems: Modeling andUnderstanding the Role of Functional Grading and OtherStructural CharacteristicsTechnical Presentation. IMECE2018-89062Christopher Stubbs, New York University, Brooklyn, NY,United States, Wenhuan Sun, Carnegie Mellon University,Pittsburgh, PA, United States, Douglas D. Cook, BrighamYoung University, Provo, UT, United States

12:14pm – Nonlinear Contact Mechanics for the Indentationof Cellular Cylindrical BodiesTechnical Presentation. IMECE2018-89082Amy Dagro, K.T. Ramesh, Johns Hopkins University,Baltimore, MD, United States

4-7 BIOMEDICAL DEVICES4-7-2 Surgical Assistive DevicesThird Floor, David L. Lawrence Convention Center, Room 310

10:50am–12:35pm

Session Chair: Lulu Wang, Hefei University of Technology,Hefei, China

Session Co-Chair: Maurizio Manzo, University of North Texas,Denton, TX, United States

10:50am – Pre-Surgical Planning of Screw-PositionArrangement for the Femur Fractures With a Custom APPTechnical Paper Publication. IMECE2018-86013Chen-Yuan Chung, Jiing-Yih Lai, He-Kai Young, Han-YuanGao, National Central University, Taoyuan City, Taiwan

11:11am – Biomedical Devices Using Shape MemoryPolymer Foams for Treatment of Intracranial AneurysmsTechnical Paper Publication. IMECE2018-86120Jingyu Wang, Jishan Luo, Robert Kunkel, Yingtao Liu,University of Oklahoma, Norman, OK, United States, BradleyBohnstedt, University of Oklahoma, Oklahoma City, OK,United States, Chung-Hao Lee, University of Oklahoma,Norman, OK, United States

11:32am – Modified Laparoscopic Tool for Enhanced HapticFeedbackTechnical Paper Publication. IMECE2018-86345Rajesh Kumar, Sudipto Mukherjee, Indian Institute ofTechnology Delhi, New Delhi, India

11:53am – A Novel Stent Graft that Contains SuperelasticNitnol and Ultra-Stretchable ePTFE for the HemorrhageControlTechnical Presentation. IMECE2018-87829Moataz Elsisy, Yanfei Chen, Bryan Tillman, Catherine Go,Sung Kwon Cho, William Clark, Tae hur, Yicheng Ding,Youngjae Chun, University of Pittsburgh, Pittsburgh, PA,United States

12:14pm – Demonstration and Experimental Validation ofPlastic-Encased Resonant Ultrasonic PiezoelectricActuator for MRI-Guided Surgical RobotsTechnical Paper Publication. IMECE2018-87963Paulo Carvalho, Christopher Nycz, Katie Gandomi, GregoryFischer, Worcester Polytechnic Institute, Worcester, MA,United States


48

4-10 COMPUTATIONAL MODELING INBIOMEDICAL APPLICATIONS4-10-5 Biomedical Modeling VThird Floor, David L. Lawrence Convention Center, Room 311

10:50am–12:35pm



10:50am – The Wisdom of Crowds Approach to Influenza-Rate ForecastingTechnical Paper Publication. IMECE2018-86559Jeff Morgan, Joint Research and Development, Inc., Stafford,VA, United States, Otto Wilson, The Catholic University ofAmerica, Washington, DC, United States, Prahlad Menon,University of Pittsburgh, Pittsburgh, PA, United States

11:11am – Non-Linear Analysis of Bio-Structures ThroughRefined Beam ModelsTechnical Paper Publication. IMECE2018-86848Daniele Guarnera, Erasmo Carrera, Ibrahim Kaleel, AlfonsoPagani, Politecnico di Torino, Torino, Italy, Marco Petrolo,Politecnico di Torino, Turin, Italy

11:32am – Differential Plate Lengths in Long Bone FixationCan Increase Peak StrainsTechnical Presentation. IMECE2018-87557David Jordan, Mark Miller, University of Pittsburgh,Pittsburgh, PA, United States, Alexander Kharlamov,Allegheny General Hospital, Pittsburgh, PA, United States

11:53am – Modeling Heat Regulation With a StructuredMesh, Finite Volume Approach in a Voxelized DomainTechnical Paper Publication. IMECE2018-88036Rohan Amare, Steven Eckels, Amir Bahadori, Kansas StateUniversity, Manhattan, KS, United States

12:14pm – Analysis of Temperature in Surgical-Drilling ofEx-vivo Human Femurs Using Probabilistic ApproachTechnical Presentation. IMECE2018-88811Pandithevan Ponnusamy, PrasannavenkadesanVaratharajan, Vinayaga Muruga Pandy Natarajan, IndianInstitute of Information Technology Design and ManufacturingKancheepuram, Chennai, Tamilnadu, India

4-14 BIOTRANSPORT (FLUID. HEAT ANDMASS)4-14-2 Heat Transfer and FluidThird Floor, David L. Lawrence Convention Center, Room 315

10:50am–12:35pm

Session Chair: X. Gary Tan, U.S. Naval Research Lab,Washington, DC, United States

Session Co-Chair: Anne Schmitz, Gannon University, Erie, PA,United States

10:50am – Numerical Investigation of Heat Transfer inTissues During Therapeutic HyperthermiaTechnical Paper Publication. IMECE2018-86485Saeed Tiari, Mahboobe Mahdavi, Kinjalkumar Chauhan,Davide Piovesan, Gannon University, Erie, PA, United States

11:11am – Investigation of Radio-frequency Rewarming asa Means to Reduce Thermomechanical Stress During Ice-Free Rewarming From Cryopreservation StorageTechnical Presentation. IMECE2018-89224Prem Solanki, Yoed Rabin, Carnegie Mellon University,Pittsburgh, PA, United States

11:32am – Review of Diffusive Transport in the VitreousHumor: Experimental and Analytical StudiesTechnical Presentation. IMECE2018-89421Anita Penkova, Satwindar Sadhal, University of SouthernCalifornia, Los Angeles, CA, United States

11:53am – Thermal Conductivity of Cryoprotective Agentsin the Presence of Silica-Coated and Uncoated Iron-OxideNanoparticlesTechnical Presentation. IMECE2018-89584Lili Ehrlich, Carnegie Mellon University, Pittsburgh, PA, UnitedStates, Zhe Gao, John Bischof, University of Minnesota,Minneapolis, MN, United States, Yoed Rabin, Carnegie MellonUniversity, Pittsburgh, PA, United States

4-2 DAMAGE BIOMECHANICS4-2-2 Damage Biomechanics II: Ballistic Impact andBlast Effects and AnalysisThird Floor, David L. Lawrence Convention Center, Room 308

2:05pm–3:50pm

Session Chair: Reuben Kraft, Pennsylvania State University,University Park, PA, United States

Session Co-Chair: Ashfaq Adnan, University of TexasArlington, Arlington, TX, United States

2:05pm – The Strain Rates of the Brain and Skull UnderDynamic LoadingTechnical Paper Publication. IMECE2018-88300Mohammad Hosseini Farid, Ashkan Eslaminejad,Mohammadreza Ramzanpour, Mariusz Ziejewski, Ghodrat Karami, North Dakota State UniversityUnited States


49

2:20pm – Computational Analysis for Validation of BlastInduced Traumatic Brain Injury and Protection of CombatHelmetTechnical Paper Publication. IMECE2018-87689X. Gary Tan, Amit Bagchi, U.S. Naval Research Laboratory,Washington, DC, United States

2:35pm – Indent Depth in the Clay Backing for CeramicArmorTechnical Paper Publication. IMECE2018-88284Timothy Zhang, Sikhanda S. Satapathy, ARL WMRD, APG,MD, United States

2:50pm – Development of an Experiment to Visualize AirFlow Into Ballistics Gelatin Targets Shot With Small CaliberProjectilesTechnical Presentation. IMECE2018-89706Karim Muci-Kuchler, Steven Dixler, Aaron Bost, SouthDakota School of Mines and Technology, Rapid City, SD,United States

3:05pm – A Multiscale Approach to ModelMechanoporation Damage in NeuronsTechnical Presentation. IMECE2018-89588A.H. Bakhtiary, Mississippi State University, Mississippi State,MS, United States, Michael Murphy, Mississippi StateUniversity, Starkville, MS, United States, M.D. Jones, CardiffUniversity, Cardiff, Wales, D. Bammann, R.K. Prabhu,Mississippi State University, Starkville, MS, United States

3:20pm – Mapping Combat Helmet Design and OperationalParameter Trade Spaces Based on Ballistic Threats andHead Injury SeverityTechnical Presentation. IMECE2018-86725Peter Matic, Robert Saunders, U.S. Naval ResearchLaboratory, Washington, DC, United States

4-5 BIOMATERIALS AND TISSUE:MODELLING, SYNTHESIS, FABRICATIONAND CHARACTERIZATION4-5-3 Biomaterials andTissue III: Sythesis andCharacteriazationThird Floor, David L. Lawrence Convention Center, Room 309

2:05pm–3:50pm

Session Chair: Karen Chang Yan, The College of New Jersey,Ewing Township, NJ, United States

Session Co-Chair: Anil Saigal, Tufts University, Medford, MA,United States

2:05pm – Development of Chemotherapy System UsingPlasma Activated Medium to Enhance PC12 AxonalExtensionTechnical Paper Publication. IMECE2018-86630Takanobu Haccho, Hiroshi Ichikawa, Koji Yamamoto,Yusuke Morita, Eiji Nakamachi, Doshisha University, Kyoto,Japan

2:20pm – Development of Three-Dimensional DC ElectricField Stimulation Bio-Reactor for Axonal OutgrowthEnhancementTechnical Paper Publication. IMECE2018-86637Shohei Tanaka, Ryota Sakiyama, Yusuke Morita, KojiYamamoto, Eiji Nakamachi, Doshisha University, Kyoto,Japan

2:35pm – Development of Stretch Stimulation Device forThree-Dimensional Culture of PC12 CellsTechnical Paper Publication. IMECE2018-86643Madoka Imura, Ryota Sakiyama, Yusuke Morita, KojiYamamoto, Eiji Nakamachi, Doshisha University, Kyoto,Japan

2:50pm – Design and Fabrication of Pneumatic Soft GripperTechnical Paper Publication. IMECE2018-86648Zhonghua Guo, Xiaoning Li, Zhongsheng Sun, NanjingUniversity of Science and Technology, Nanjing, Jiangsu, China

3:05pm – Folding Artificial Mucosa With Cell-LadenHydrogels Guided by Mechanics ModelsTechnical Presentation. IMECE2018-89290Honfei Chan, Hongkong City University, Hongkong, China,Ruike Zhao, Xuanhe Zhao, Massachusetts Institute ofTechnology, Cambridge, MA, United States

3:20pm – Biomaterial Models Adjustment and Comparisonfor Ultra-High Molecular Weight Polyethylene in FiniteElement ModelsTechnical Paper Publication. IMECE2018-87719Humberto Corro Hernandez, Universidad de Guanajuato,Guanajuato, Mexico, Agustin Vidal-Lesso, Elias Ledesma,Antonio de Jesus Balvantin Garcia, University of Guanajuato,Salamanca, Mexico

4-7 BIOMEDICAL DEVICES4-7-3 Fluid and Microfluid Biomedical DevicesThird Floor, David L. Lawrence Convention Center, Room 310

2:05pm–3:50pm

Session Chair: Chao Liang, Praxair, Inc., Tonawanda, NY,United States

Session Co-Chair: Margaret Nowicki, U.S. Military Academy,West Point, NY, United States

2:05pm – Design of Forward-Looking IntravascularUltrasonic Transducer for Microbubble-MediatedThrombolysisTechnical Presentation. IMECE2018-86464Ho-Wuk Kim, Jinwook Kim, Huaiyu Wu, Xiaoning Jiang,North Carolina State University, Raleigh, NC, United States

2:26pm – An Approach to Capture Humidity From ExhaledAirTechnical Paper Publication. IMECE2018-86507Sandra Grau Bartual, Ahmed M. Al-Jumaily, AucklandUniversity of Technology, Auckland, New Zealand


50

2:47pm – Canal Design for SLA Printing of ClosedGeometriesTechnical Paper Publication. IMECE2018-87097Erin Petrosky, Anne Schmitz, Gannon University, Erie, PA,United States

3:08pm – Development of a Hybrid Blood Pump forExtracorporeal Blood Circulation DevicesTechnical Presentation. IMECE2018-87291Nahmkeon Hur, Sungwon Kang, Wonjung Kim, SogangUniversity, Seoul, Korea (Republic)

3:29pm – Continuous Cell Sorting by Dielectrophoresis in aStraight Microfluidic ChannelTechnical Paper Publication. IMECE2018-88156Yuhao Qiang, Jia Liu, Darryl Dieujuste, Katrina Ramsamooj,Sarah E. Du, Florida Atlantic University, Boca Raton, FL,United States

4-9 CLINICAL APPLICATIONS OFBIOENGINEERING4-9-1 Clinical Applications of Bioengineering I –Experimental MethodsThird Floor, David L. Lawrence Convention Center, Room 311

2:05pm–3:50pm

Session Chair: Douglas E. Dow, Wentworth Institute ofTechnology, Boston, MA, United States

Session Co-Chair: Lara Thompson, University of the District ofColumbia, Washington, DC, United States

2:05pm – Exploring Training Methodologies Towards theImprovement of Elderly BalanceTechnical Paper Publication. IMECE2018-86815Lara Thompson, Joao Augusto Renno Brusamolin, JelaniGuise, Mehdi Badache, Sandy Collado Estrada, LonikaBehera, Marzieh Savadkoohi, Tyra Coombs, Pablo SanchezGuerrero, Devdas Shetty, University of the District ofColumbia, Washington DC, United States

2:26pm – Investigation of Forces in Deep Hole Bone DrillingTechnical Paper Publication. IMECE2018-87064JuEun Lee, Serena Chu, Craig L. Chavez, University of thePacific, Stockton, CA, United States

2:47pm – A Clinical Experiment on Infant Applied PressuresDuring BreastfeedingTechnical Paper Publication. IMECE2018-87674Lin Jiang, Diana Alatalo, University of Texas at Dallas,Richardson, TX, United States, Donna Geddes, University ofWestern Australia, Crawley, WA, Australia, FatemehHassanipour, University of Texas at Dallas, Richardson, TX,United States

3:08pm – In Situ Tension of the Digital NervesTechnical Presentation. IMECE2018-87835Patrick J. Schimoler, Jacob Didesch, Peter Tang, Mark CarlMiller, Allegheny General Hospital, Pittsburgh, PA, UnitedStates

3:29pm – Experimental Study of Bio-Polymer Knee ImplantTechnical Paper Publication. IMECE2018-88479Maria Ramos Gonzalez, Brendan O’Toole, Zhiyong Wang,University of Nevada, Las Vegas, Las Vegas, NV, United States

4-2 DAMAGE BIOMECHANICS4-2-1 Damage Biomechanics I: Blunt Impact Effectsand AnalysisThird Floor, David L. Lawrence Convention Center, Room 308

4:00pm–5:45pm

Session Chair: C.S. Florio, U.S. Army ARDEC, PicatinnyArsenal, NJ, United States

Session Co-Chair: Amit Bagchi, U.S. Naval ResearchLaboratory, Washington, DC, United States

4:00pm – Ranking of Biomechanical Metrics to DescribeHuman Response to Impact-Induced DamageTechnical Paper Publication. IMECE2018-88007Nicholas DeVogel, Anjishnu Banerjee, Frank Pintar, MedicalCollege of Wisconsin, Milwaukee, WI, United States, NarayanYoganandan, Medical College of Wisconsin and VA MedicalCenter, Milwaukee, WI, United States

4:15pm – Computational Human Torso Model Validation forFrontal Blunt TraumaTechnical Paper Publication. IMECE2018-88382Carolyn Hampton, ORISE, Bel Air, MD, United States, Michael Kleinberger, ARL, Aberdeen Proving Ground, MD,United States

4:30pm – Cerebrospinal Fluid and Spherically ConvergentShear Waves During Blunt Head TraumaTechnical Presentation. IMECE2018-88389Martin Ostoja-Starzewski, Amit Madhukar, University ofIllinois at Urbana-Champaign, Urbana, IL, United States, Ying Chen, Simulia Corp., Katy, TX, United States

4:45pm – Computational Modeling of Blunt Impact to Headand Correlation of Biomechanical Measures With MedicalImagesTechnical Paper Publication. IMECE2018-88026X. Gary Tan, U.S. Naval Research Laboratory, Washington, DC,United States, Maria M. D’Souza, Subhash Khushu, INMAS,New Dehli, India, Raj K. Gupta, USMRMC, Fort Detrick, MD,United States, Virginia DeGiorgi, U.S. Naval ResearchLaboratory, Washington, DC, United States, Ajay K. Singh,INMAS, New Dehli, India, Amit Bagchi, U.S. Naval ResearchLaboratory, Washington, DC, United States

5:00pm – Monitoring Tissue Damage Using Cloud-BasedBrain BiomechanicsTechnical Presentation. IMECE2018-89984Ritika Menghani, Reuben Kraft, Pennsylvania StateUniversity, University Park, PA, United States


51

5:15pm – Pelvic Injury Survival Analysis for a Finite ElementHuman Body Model Using Multiple Data SetsTechnical Paper Publication. IMECE2018-88447Caitlin Weaver, Wake Forest University, Winston Salem, NC,United States, Anna Miller, Washington University, St. Louis,MO, United States, Joel Stitzel, Wake Forest University,Winston Salem, NC, United States

4-5 BIOMATERIALS AND TISSUE:MODELLING, SYNTHESIS, FABRICATIONAND CHARACTERIZATION4-5-4 Biomaterials andTissue IV: Sythesis andCharacteriazationThird Floor, David L. Lawrence Convention Center, Room 309

4:00pm–5:45pm

Session Chair: Anil Saigal, Tufts University, Medford, MA,United States


4:00pm – Reproduction of Kinematic Behavior of ElasticLamellae in the Thoracic Aortic MediaTechnical Paper Publication. IMECE2018-87242Atsutaka Tamura, Yuya Kato, Tottori University, Tottori, Japan

4:21pm – Mechanical Properties of the Human ElbowBones Measured by Nanoindentation and MicroindentationTechnical Paper Publication. IMECE2018-87406Dilpreet Singh, Pulak Mohan Pandey, DineshKalyanasundaram, Indian Institute of Technology Delhi, NewDelhi, India

4:42pm – Mechanical Property Determination of aStereolithographic Resin Subjected to CompressiveLoadingTechnical Paper Publication. IMECE2018-87600Christian Fry, Adam Mihalko, Robert Michael, DavidePiovesan, Gannon University, Erie, PA, United States

5:03pm – Correlation of Tumor Mechanical Rigidity toCancer Stage and Chemotherapeutic ResponseTechnical Presentation. IMECE2018-89317Brian Bush, National Institute of Standards and Technology,Gaithersburg, MD, United States

5:24pm – Self-Folding Microgels to Form Artificial CapillaryBlood Vessels and a Mathematical Model to Decipher theDynamics of Self-FoldingTechnical Presentation. IMECE2018-89784Chunxiao Cui, Devon Eichfeld, Sean Liu, Mingkun Wang, Li-Hsin Han, Drexel University, Philadelphia, PA, United States

4-6 SYMPOSIUM ON MECHANOBIOLOGY4-6-1 MechanobiologyThird Floor, David L. Lawrence Convention Center, Room 317

4:00pm–5:45pm

Session Chair: Hai-Chao Han, University of Texas at SanAntonio, San Antonio, TX, United States

Session Co-Chair: Zhangli Peng, University of Notre Dame,Notre Dame, IN, United States

4:00pm – Shear Stress Induced Calcium DependentNuclear Deformation in Epithelial CellsTechnical Paper Publication. IMECE2018-87650Deekshitha Jetta, Deepika Verma, Mohammad M. Maneshi,Susan Z. Hua, University at Buffalo, State University of NewYork, Buffalo, NY, United States

4:21pm – Pneumatic Microfluidic Cell Compression DeviceTechnical Presentation. IMECE2018-89141Donghee Lee, Alek G. Erickson, University of NebraskaMedical Center, Omaha, NE, United States, Taesun You, Texas Department of Transportation, Houston, TX, UnitedStates, Andrew T. Dudley, University of Nebraska MedicalCenter, Omaha, NE, United States, Sangjin Ryu, University of Nebraska–Lincoln, Lincoln, NE, United States

4:42pm – A Multi-Physics Model for Mechanosensing inCell MigrationTechnical Presentation. IMECE2018-89346Bahador Marzban, Hongyan Yuan, University of RhodeIsland, Kingston, RI, United States

5:03pm – A Model for Cellular Mechanotransduction andContractility at Finite StrainTechnical Presentation. IMECE2018-89389Nikolaos Bouklas, Cornell University, Ithaca, NY, UnitedStates, Selman Sakar, William Curtin, EPFL, Lausanne,Switzerland

5:24pm – A Coupled Reaction-Diffusion-Strain Model ofMesenchymal Stem Cell Differentiation Into OsteoblastsTechnical Presentation. IMECE2018-89761Matthew Dolack, Pennsylvania State University, State College,PA, United States


52

4-7 BIOMEDICAL DEVICES4-7-4 Rehabilitation andTreatment DevicesThird Floor, David L. Lawrence Convention Center, Room 310

4:00pm–5:45pm

Session Chair: Liandong Yu, Hefei University of Technology,Hefei, China

Session Co-Chair: Shan Hu, Iowa State University, Ames, IA,United States

4:00pm – Minimizing Pain in Below Knee Amputees’—Patients Wearing Prosthetic Socket by Increasing Flexibilityin Specific Relief AreasTechnical Paper Publication. IMECE2018-86450Gabi Nehme, Micheline Dib Nehme, Yousef Khalife, AntounChagoury, University of Balamand, El-Koura, Lebanon North,Lebanon

4:21pm – Development of a Passive Prosthetic Ankle WithSlope Adapting CapabilitiesTechnical Paper Publication. IMECE2018-86593Sandesh G. Bhat, Sangram Redkar, Arizona State University,Mesa, AZ, United States, Thomas Sugar, Arizona StateUniversity, Chandler, AZ, United States

4:42pm – Design of a Smart Glove Using FlexibleTechnology for Artificial GripperTechnical Paper Publication. IMECE2018-86620Vidya Nandikolla, Robin Bochen, Tristin Suhr, CaliforniaState University Northridge, Northridge, CA, United States

5:03pm – Design and Prototype Development of aReconfigurable Wheelchair With Stand-Sit-SleepConfigurationsTechnical Paper Publication. IMECE2018-87905Sumit Desai, Shankar Mantha, Vikas Phalle, Sangram Patil,Vishwadeep Handikherkar, Veermata Jijabai TechnologicalInstitute, Mumbai, Maharashtra, India

5:24pm – Neural Network Modeling of Maximum InsertionForce of Bevel-Tip Surgical NeedleTechnical Paper Publication. IMECE2018-88383Sai Teja Reddy Gidde, Tololupe Verissimo, Nuo Chen,Temple University, Philadelphia, PA, United States, Byoung-gook Loh, Hansung University, Seoul, Korea (Republic),Parsaoran Hutapea, Temple University, Philadelphia, PA,United States

4-9 CLINICAL APPLICATIONS OFBIOENGINEERING4-9-2 Clinical Applications of Bioengineering IIThird Floor, David L. Lawrence Convention Center, Room 311

4:00pm–5:45pm

Session Chair: Kalyani Nair, Bradley University, Peoria, IL,United States

Session Co-Chair: Li-Hsin Han, Drexel University,Philadlephia, PA, United States

4:00pm – Coupling Immunofluorescence andOptoelectrokinetic Technique for Escherichia ColiDetection and Quantification in WaterTechnical Paper Publication. IMECE2018-86749Uzumma O. Ozeh, Purdue University Northwest, Hammond,IN, United States, A.G. Agwu Nnanna, University of Texas ofthe Permian Basin, Odessa, TX, United States, Justus C.Ndukaife, Vanderbilt University, Nashville, TN, United States

4:21pm – Viscoelastic Properties of the L3-L4 MyofascialTissue in Ankylosing Spondylitis PatientsTechnical Paper Publication. IMECE2018-87906Allison White, Hannah Abbott, Bradley University, Peoria, IL,United States, Alfonse Masi, University of Illinois College ofMedicine, Peoria, IL, United States, Kalyani Nair, BradleyUniveristy, Peoria, IL, United States

4:42pm – Three-Dimensional Cephalometric Analysis UsingComputed Tomographic ImagingTechnical Paper Publication. IMECE2018-88259Prahlad Menon, Soroosh Sanatkhani, University ofPittsburgh, Pittsburgh, PA, United States

5:03pm – Deposition Control of a FDM 3D Printer BasedDirect Writing System for Hydrogel Molding in MicrofluidicDevices FabricationTechnical Paper Publication. IMECE2018-88267Karen Chang Yan, The College of New Jersey, EwingTownship, NJ, United States, Jacob Boyle, The College ofNew Jersey, Hillsdale, NJ, United States, Kristi Petersen, TheCollege of New Jersey, Ewing, NJ, United States

5:24pm – A New Wideband Microwave Antenna for BreastCancer DetectionTechnical Paper Publication. IMECE2018-87390Lulu Wang, Jinzhang Xu, Hefei University of Technology,Hefei, China


53

NOTES

54

5-1-1: Product and Process Design I

5-1-2: Product and Process Design II

5-1-3: Product and Process Design III

5-1-4: Product and Process Design IV

5-2-1: Social Context Aware Design

5-4-1: CAD, CAM and CAE Design I

5-4-2: CAD, CAM and CAE Design II

5-5-1: Product Optimization I

5-5-2: Product Optimization II

5-8-1: Reliability and Risk in Energy Systems

5-10-1: Topics on Safety and Hazard Analysis

5-10-2: Topics on Risk and Hazard Analysis

5-11-1: Failure and Forensic Analysis

5-12-1: Reliability Methods

5-13-1: Safety, Risk and Reliability of EmergingTechnologies

5-14-1: Testing for Product Reliability and Safety

5-16-1: Safety in Transportation, Agriculture, and Off-Road Vehicles

5-16-2: Safety in Transportation, Agriculture, and Off-Road Vehicles

5-17-1: Structural Systems Crashworthiness

5-17-2: Full Vehicle Crashworthiness and Occupants Protection

5-18-2: General

5-19-1: Design, Reliability, Safety, and Risk Plenary

Track OrganizersDumitru Caruntu, University of Texas

Rio Grande Valley, United StatesBogdan Epureanu, University of

Michigan, United StatesMarco Amabili, McGill University,

Canada

Topic OrganizersShuichi Fukuda, Keio University, JapanMasato Inoue, Meiji University, JapanCaterina Rizzi, University of Bergamo,

ItalyDaniele Regazzoni, University of

Bergamo, ItalyMarco Rossoni, Politecnico di Milano,

ItalyMiri Weiss Cohen, Braude College of

Engineering, IsraelAntonio Caputi, Università degli Studi di

Bergamo, ItalyGuangdong Zhu, NREL, United StatesZhiwen Ma, NREL, United StatesMihai Diaconeasa, UCLA, CA, United

StatesAlba Sofi, University “Mediterranea” of

Reggio Calabria, ItalyXiaobin Le, Wentworth Institute of

Technology, United StatesArun Veeramany, Pacific Northwest

National Laboratory, United StatesBin Zhou, FM Global, United States

Chimba Mkandawire, Exponent Inc.,United States

Mohammad Pourgol-Mohammad, JCI/Sahand University of Technology,United States

Enrique Droguett, University of Chile,Chile

Dengji Zhou, Shanghai Jiao TongUniversity, China

Jeremy Gernand, Pennsylvania StateUniversity, United States

John Wiechel, SEA, Limited, UnitedStates

Thomas Maull, SEA, Limited, UnitedStates

Mohamed Ridha Baccouche, Ford,United States

Saeed Barbat, Ford Motor Company,United States

Session OrganizersDaniele Regazzoni, University of

Bergamo, ItalyPooya Mahmoudian, Haskel

International, United StatesShuichi Fukuda, Keio University, JapanSina Mohsenian, University of

Massachusetts Lowell, United StatesAnthony D Angelo, US Army ARDEC,

United StatesOlga Sankowski, Hamburg University of

Technology, Germany

Giorgio Colombo, Politecnico Di Milano,Italy

Marco Rossoni, Politecnico di Milano,Italy

Ragavanantham Shanmugam, AnnaUniversity, India


Jorge D. Camba, Purdue University,United States

Antonio Caputi, Università degli Studi diBergamo, Italy

C.S. Florio, US Army ARDEC, UnitedStates

Miri Weiss Cohen, Braude College ofEngineering, Israel

Victorita Radulescu, UniversityPolitechnica of Bucharest, Romania

Guangdong Zhu, NREL, United StatesBin Zhou, FM Global, United StatesArun Veeramany, Pacific Northwest

National Laboratory, United StatesJohn Wiechel, SEA, Limited, United

StatesJavad Sattarvand, University of Nevada,

United StatesXiaobin Le, Wentworth Institute of

Technology, United StatesRudolf Reichert, George Mason

University, United States

TRACK 5 DESIGN, RELIABILITY, SAFETY, ANDRISKMONDAY, NOVEMBER 12

5-1 PRODUCT AND PROCESS DESIGN5-1-1 Product and Process Design IThird Floor, David L. Lawrence Convention Center, Room 303

9:45am–11:30am

Session Chair: Daniele Regazzoni, University of Bergamo,Dalmine (BG), Italy

Session Co-Chair: Pooya Mahmoudian, Haskel International,Burbank, CA, United States

9:45am – Method of Construction for High Cycle FatigueResistant Pressure Vessels in Hydrogen ServiceTechnical Paper Publication. IMECE2018-86292Pooya Mahmoudian, Haskel International, Burbank, CA,United States

10:06am – An Empirically Determined Design Guideline forRectangular Cross Section Nitinol Flexure Hinges With theFocus on Flexibility-Strength Trade-OffTechnical Paper Publication. IMECE2018-86551Suat Coemert, Mar Olmeda, Julia Fuckner, ChristophRehekampff, Sandra Vanessa Brecht, Tim Christian Lueth,Technical University of Munich, Garching bei Muenchen,Bavaria, Germany

10:27am – Comparing Contact Stress Estimates of SomeStraight Bevel Gears With ISO 10300 StandardsTechnical Paper Publication. IMECE2018-86572Edward Osakue, Texas Southern University, Houston, TX,United States, Lucky Anetor, Nigerian Defence Academy,Nigeria, Kaduna, Nigeria

10:48am – A Method for Constructing Standard InvoluteGear Tooth ProfileTechnical Paper Publication. IMECE2018-86573Edward Osakue, Texas Southern University, Houston, TX,United States, Lucky Anetor, Nigerian Defence Academy,Nigeria, Kaduna, Nigeria

11:09am – Introducing ISO to AGMA Conversion Factors forSteel Spiral Bevel Gears Design Under Bending FatigueTechnical Presentation. IMECE2018-89231Mehmet Onur Ogulata, Karamanoglu Mehmetbey University,Karaman, Turkey, Necdet Geren, University of Cukurova,Adana, Turkey

5-5 PRODUCT OPTIMIZATION5-5-1 Product Optimization IThird Floor, David L. Lawrence Convention Center, Room 304

9:45am–11:30am

Session Chair: Miri Weiss Cohen, Braude College ofEngineering, Karmiel, Israel

Session Co-Chair: C.S. Florio, U.S. Army ARDEC, PicatinnyArsenal, NJ, United States

9:45am – Structural Optimization of Truck Front-FrameUnder Multiple Load CasesTechnical Paper Publication. IMECE2018-86293Shuvodeep De, Karanpreet Singh, Berkan Alanbay, RakeshKapania, Virginia Tech, Blacksburg, VA, United States,Raymond Aguero, Metalsa, Roanoke, VA, United States

10:06am – Truss Design and Optimization Using StressAnalysis and NURBS CurvesTechnical Paper Publication. IMECE2018-87728Antonio Caputi, Università degli Studi di Bergamo, Dalmine(BG), Italy, Miri Weiss Cohen, Braude College of Engineering,Karmiel, Israel, Davide Russo, University of Bergamo,Dalmine, Italy, Caterina Rizzi, University of Bergamo, Rho (MI),Italy

10:27am – Optimization Methods for Controlling Stresses atContacting Surfaces of Interference Fit Assemblies UnderAxial and Torsional LoadsTechnical Paper Publication. IMECE2018-88180C.S. Florio, U.S. Army ARDEC, Picatinny Arsenal, NJ, UnitedStates

10:48am – A Novel Optimization Design Method of AdditiveManufacturing Oriented Porous StructuresTechnical Paper Publication. IMECE2018-86952Jiaqi Zhao, Ming Zhang, Yu Zhu, Xin Li, Leijie Wang,Tsinghua University, Beijing, China

11:09am – Static Stress and Thermal Analysis ofConnecting Rod Using FE-AnalysisTechnical Presentation. IMECE2018-88846Lalit Kumar Choudhary, Delhi Technological University, Delhi,Delhi, India

5-11 FAILURE AND FORENSIC ANALYSIS5-11-1 Failure and Forensic AnalysisThird Floor, David L. Lawrence Convention Center, Room 305

9:45am–11:30am

Session Chair: John Wiechel, SEA, Limited, Columbus, OH,United States

9:45am – Early Fault Warning of Spindle Based on theAdaptive Weighted Fuzzy Petri NetTechnical Paper Publication. IMECE2018-86042Hai Li, Wei Wang, Qingzhao Li, Lei Fan, Pu Huang,University Electrionic Science TChina

TRACK 5 DESIGN, RELIABILITY, SAFETY, AND RISK – MONDAY, NOVEMBER 12

55

10:06am – Test Results: Vehicle Responses to SimulatedDrag Caused by Front Tire Tread Detachment; The Effect ofScrub Radius and SpeedTechnical Paper Publication. IMECE2018-87609Mark W. Arndt, Transportation Safety, Technologies, Inc.,Phoenix, AZ, United States, Stephen Arndt, SafetyEngineering and Forensic Analysis, Phoenix, AZ, United States

10:27am – Life Prediction of L6 Steel Using Strain-LifeCurve and Strain Softening Phenomenon by Means of LowCycle Fatigue TestingTechnical Presentation. IMECE2018-88867Sanket Inamdar, Bharat Forge Ltd., Pune, Maharashtra, India

10:48am – Microstructure Characterization and Evaluationof Mechanical Properties for Friction Welded En-24 AlloySteelTechnical Presentation. IMECE2018-89043Vijay Gaikwad, Bharat Forge Ltd., KCTI, Pune, Mharashtra,India

5-14 TESTING FOR PRODUCT RELIABILITYAND SAFETY5-14-1 Testing for Product Reliability and SafetyFourth Floor, David L. Lawrence Convention Center, Room 406

9:45am–11:30am


9:45am – Sawing Status Prediction of Diamond SawbladeSawing Concrete Based on the Characteristics of MaterialCompositionTechnical Paper Publication. IMECE2018-86340Shanshan Hu, Fan Yang, Zili Yang, Feixiang Xiong, WeiweiShi, Hongqun Tang, Guangxi University, Nanning, Guangxi,China

10:06am – Testing for AM Products With RecycledFilamentsTechnical Presentation. IMECE2018-87112Serdar Tumkor, Jonathan Holman, University of Pittsburgh,Johnstown, PA, United States

10:27am – Product Design in a Global EconomyTechnical Paper Publication. IMECE2018-87685Dennis Guenther, SEA Limited, Columbus, OH, United States,Michael Arnett, Manuel Forero Rueda, SEA Limited, ElkGrove Village, IL, United States

10:48am – Statistical Time Domain Feature BasedApproach to Assess the Performance Degradation ofRotary SealsTechnical Paper Publication. IMECE2018-87857Madhumitha Ramachandran, Zahed Siddique, University ofOklahoma, Norman, OK, United States

11:09am – Considerations for Communications Systems inUnderground Refuge AlternativesTechnical Paper Publication. IMECE2018-87952Nicholas Damiano, Chenming Zhou, Bruce Whisner,National Institute for Occupational Safety and Health,Pittsburgh, PA, United States

5-17 CRASHWORTHINESS, OCCUPANTPROTECTION, AND BIOMECHANICS5-17-1 Structural Systems CrashworthinessFourth Floor, David L. Lawrence Convention Center, Room 405

9:45am–11:30am

Session Chair: Rudolf Reichert, George Mason University,Fairfax, VA, United States

Session Co-Chair: Mohamed Ridha Baccouche, Ford, AnnArbor, MI, United States

9:45am – Experimental and Numerical Studies on DynamicMechanical Properties of Metal-Polymer Hybrid MaterialsTechnical Paper Publication. IMECE2018-86521Yiben Zhang, Lingyu Sun, Lijun Li, Beihang University,Beijing, China, Taikun Wang, Yantao Wang, Henan KeyLaboratory of Underwater Intelligent Equipment, ZhengzhouElectromechanical Engineering Re, Zhengzhou, China

10:06am – Side Structure Integrity Research for PassengerRail EquipmentTechnical Paper Publication. IMECE2018-87700Shaun Eshraghi, Michael Carolan, A. Benjamin Perlman,Volpe National Transportation Systems Center, Cambridge,MA, United States

10:27am – Finite Element Analysis of the Passenger RailEquipment Workstation Table Sled TestTechnical Paper Publication. IMECE2018-87751Shaun Eshraghi, Kristine Severson, Volpe NationalTransportation Systems Center, Cambridge, MA, United States,David Hynd, Transport Research Laboratory, Wokingham,Berkshire, United Kingdom, A. Benjamin Perlman, VolpeNational Transportation Systems Center, Cambridge, MA,United States

10:48am – Dynamic Energy Absorption Characteristics ofAdditively-Manufactured Macrolattice MaterialsTechnical Paper Publication. IMECE2018-88521Keivan Davami, Mehrdad Mohsenizadeh, Michael Munther,Tyler Palma, Lamar University, Beaumont, TX, United States

11:09am – Numerical Study on Explosion Cutting Processof PMMA Plate and Key Factors Influence on CuttingPerformanceTechnical Paper Publication. IMECE2018-86793Lei Ge, Beihang University, Beijing, China, Yantao Wang,Huipeng Hu, Henan Key Laboratory of Underwater IntelligentEquipment, Zhengzhou Electromechanical Engineering Re,Zhengzhou, China, Lijun Li, Yiben Zhang, Beihang UniversityBeijing, China


56

5-1 PRODUCT AND PROCESS DESIGN5-1-2 Product and Process Design IIThird Floor, David L. Lawrence Convention Center, Room 303

1:45pm–3:30pm

Session Chair: Shuichi Fukuda, Keio University, Minato-ku,Tokyo, Japan

Session Co-Chair: Sina Mohsenian, University ofMassachusetts Lowell, Lowell, MA, United States

1:45pm – The Automatic Basketball Rebound SystemTechnical Paper Publication. IMECE2018-86715Thomas Smith, Vidya Nandikolla, California State UniversityNorthridge, Northridge, CA, United States

2:06pm – Journal Bearing With Controllable RadialClearanceTechnical Paper Publication. IMECE2018-86748Shahrbanoo Farkhondeh Biabnavi, Cleveland StateUniversity, Beachwood, OH, United States, Majid Rashidi,Cleveland State University, Pepper Pike, OH, United States

2:27pm – Cross Sectional Area Changes Due to PlasticBending of Prismatic BarsTechnical Paper Publication. IMECE2018-87608Michael Zielinski, Rotor Clip Co Inc., Somerset, NJ, UnitedStates, Ismail Soner Cinoglu, Lehigh University, Bethlehem,PA, United States

2:48pm – Numerical Analysis of the Contribution of ShotPeening in the Fatigue Strength of Multipass Welded JointsTechnical Paper Publication. IMECE2018-87720Unai Etxeberria, Jon Ander Esnaola, Ibai Ulacia, MondragonUniversitatea - Mondragon Goi Eskola Politeknikoa J.M.A.S.Coop., Mondragon, Spain, Done Ugarte, Iñigo Llavori, MirenLarrañaga, Mondragon Unibertsitatea, Mondragon, Spain,Arkaitz Lopez-Jauregi, Escuela Politécnica Superior,Mondragon Unibertsitatea, Mondragon, Spain

3:09pm – Reactive Nitrogen Plasma Spray Coating ofTitanium Nitride: Plasma Torch Design and CoatingAnalysisTechnical Presentation. IMECE2018-88813Sina Mohsenian, University of Massachusetts Lowell, Lowell,MA, United States

5-5 PRODUCT OPTIMIZATION5-5-2 Product Optimization IIThird Floor, David L. Lawrence Convention Center, Room 304

1:45pm–3:30pm

Session Chair: Antonio Caputi, Università degli Studi diBergamo, Dalmine (BG), Italy

Session Co-Chair: Victorita Radulescu, University Politechnicaof Bucharest, Bucharest, Romania

1:45pm – Optimal Reaction Wrench Measuring PlatformTechnical Paper Publication. IMECE2018-87057Rajesh Kumar, Aditya Jain, Jitendra Prasad Khatait, IndianInstitute of Technology Delhi, New Delhi, India

2:06pm – Systematic Study of the Effect of Non-UniformSeal Stiffness on the Contact Stress in Flat-Faced Soft-Seated Spring Operated Pressure Relief ValvesTechnical Paper Publication. IMECE2018-87926Alex Schimanowski, Arthur Seibel, Josef Schlattmann,Hamburg University of Technology, Hamburg, Germany

2:27pm – Automotive Headlamp Design Optimization andPhotometry Performance ImprovementTechnical Presentation. IMECE2018-89120Girish Kerur, Sachin M. Jadhao, Savitribai Phule PuneUniversity, Pune, Maharashtra, India

2:48pm – Numerical Modeling of the Intelligent HeatingSystems for Living SpaceTechnical Presentation. IMECE2018-89189Victorita Radulescu, University Politechnica of Bucharest,Bucharest, Romania

3:09pm – Advanced Modeling and Experimental Validationof an Optimized Power Transformer TankTechnical Paper Publication. IMECE2018-87769Hélder Fernando Gonçalves Mendes, Cristiano JoséPereira Coutinho, Sérgio Manuel Oliveira Tavares, LuísMiguel Ribeiro Félix, Agostinho Emanuel Nunes Martins deMatos, Efacec Energia, Máquinas e Equipamentos Eléctricos,S.A., Porto, Porto, Portugal, José Filipe Bizarro Meireles,António Costa Marques Pinho, Joel Ricardo da SilvaTeixeira, University of Minho, Guimarães, Portugal


57

5-12 RELIABILITY METHODS5-12-1 Reliability MethodsThird Floor, David L. Lawrence Convention Center, Room 305

1:45pm–3:30pm

Session Chair: Mohammad Pourgol-Mohammad, JCI/SahandUniversity of Technology, York, PA, United States

Session Co-Chair: Xiaobin Le, Wentworth Institute ofTechnology, Boston, MA, United States

1:45pm – Applications of the Monte Carlo Method forEstimating the Reliability of Components Under MultipleCyclic Fatigue LoadingsTechnical Paper Publication. IMECE2018-86130Xiaobin Le, Wentworth Institute of Technology, Boston, MA,United States

2:06pm – System Wear Life Estimation Under UncertaintyTechnical Paper Publication. IMECE2018-87015Mohammad Pourmostafaei, Sahand University of Technology,Tabriz, East Azarbaijan, Iran, Mohammad Pourgol-Mohammad, JCI/Sahand University of Technology, York, PA,United States, Mojtaba Yazdani, Hossein Salimi, SahandUniversity of Technology, Tabriz, East Azarbaijan, Iran

2:27pm – A Whole Operation Life Cycle Model of GasTurbine Blades Under Multi-Physics Based on Variation ofBlade Profile ParametersTechnical Paper Publication. IMECE2018-87040Dengji Zhou, Tingting Wei, Ma Shixi, Huisheng Zhang,Zhenhua Lu, Shilie Weng, Shanghai Jiao Tong University,Shanghai, China

2:48pm – Reliability-Based Optimal Design of a Micro-GridSystem Under Natural DisastersTechnical Paper Publication. IMECE2018-88139Zhetao Chen, Rutgers, The State University of New Jersey,Piscataway, NJ, United States, Zhimin Xi, Rutgers University -New Brunswick, Piscataway, NJ, United States

3:09pm – An Investigation for Operational ReliabilityAssessment of Rolling Bearings Using Ensemble StackedDeep Auto-encodersTechnical Presentation. IMECE2018-89518Qibin Wang, Xianguang Kong, Hongbo Ma, Lei Yin, JiantaoChang, Yao Liu, Xidian University, Xi’an, China

5-16 SAFETY IN TRANSPORTATION,AGRICULTURE, AND OFF-ROAD VEHICLES5-16-1 Safety in Transportation, Agriculture, and Off-Road VehiclesFourth Floor, David L. Lawrence Convention Center, Room 406

1:45pm–3:30pm


1:45pm – Road Guard: Innovative Use of Plastic WasteMaterial in Redesigning Road CurbsTechnical Paper Publication. IMECE2018-86021Ebenezer Ahiati, Kwame Nkrumah University of Science andTechnology, Kumasi, Ghana

2:06pm – Low-Cost Wi-Fi Navigation of Smart WheelchairsTechnical Paper Publication. IMECE2018-86277Wafa Batayneh, Khaled Hatamleh, Jordan University ofScience & Technology, Irbid, Jordan, Amjad Nusayr, Universityof Houston–Victoria, Victoria, TX, United States, RamaAlQuraan, Aseel Al-Khaleel, Ahmad Bataineh, JordanUniversity of Science & Technology, Irbid, Jordan

2:27pm – Variable Braking Force Using Intelligent TwinCalipersTechnical Paper Publication. IMECE2018-86594Ganesh Vinayaga Sundaram, Sri Venkateswara College ofEngineering, Chennai, India, Chidambaram Subramanian,Centre for Tire Research, Blacksburg, VA, United States

2:48pm – Optimal Design of a Conventional andMagnetorheological Fluid Brakes Using Sensitivity Analysisand Taguchi MethodTechnical Paper Publication. IMECE2018-86775Salwan Obaid Waheed Khafaji, Noah Manring, MohammedAl-Mudhafar, University of Missouri - Columbia, Columbia,MO, United States

5-17 CRASHWORTHINESS, OCCUPANTPROTECTION, AND BIOMECHANICS5-17-2 Full Vehicle Crashworthiness and OccupantsProtectionFourth Floor, David L. Lawrence Convention Center, Room 405

1:45pm–3:30pm

Session Chair: Lingyu Sun, Beihang University, Beijing, China

Session Co-Chair: Mohamed Ridha Baccouche, Ford, AnnArbor, MI, United States

1:45pm – Development of Structural Countermeasures forNHTSA’s Oblique ImpactTechnical Paper Publication. IMECE2018-86684Rudolf Reichert, Cing-Dao (Steve) Kan, George MasonUniversity, Fairfax, VA, United States


58

2:06pm – A New Crashworthiness Design Method forComplex Vehicular Structures Using Principal ComponentsAnalysis (PCA) and Data MiningTechnical Presentation. IMECE2018-87703Xianping Du, Feng Zhu, Embry-Riddle Aeronautical University,Daytona Beach, FL, United States

2:27pm – Finite Element Model Validation of the Hybrid-IIIRail Safety (H3-RS) Anthropomorphic Test Device (ATD)Technical Paper Publication. IMECE2018-87736Shaun Eshraghi, Kristine Severson, Volpe NationalTransportation Systems Center, Cambridge, MA, United States,David Hynd, Transport Research Laboratory, Wokingham,Berkshire, United Kingdom, A. Benjamin Perlman, VolpeNational Transportation Systems Center, Cambridge, MA,United States

2:48pm – Pedestrian Collision Responses Using LegformImpactor Subsystem and Full-Sized Pedestrian Model onDifferent WorkbenchesTechnical Paper Publication. IMECE2018-87904Obaidur Rahman Mohammed, Hamid Lankarani, ShabbirMemon, Wichita State University, Wichita, KS, United States

3:09pm – A Peak-Selection RBF Mesh Morphing Method forSubject-Specific Child Occupant ModelingTechnical Paper Publication. IMECE2018-88398Yunlei Yin, Wenxiang Dong, Chongqing University,Chongqing, China, Zhenfei Zhan, Chongqing University,Livonia, MI, United States, JunMing Li, Chongqing University,Chongqing, China

5-1 PRODUCT AND PROCESS DESIGN5-1-3 Product and Process Design IIIThird Floor, David L. Lawrence Convention Center, Room 303

3:45pm–5:30pm

Session Chair: Anthony D Angelo, U.S. Army ARDEC,Hillsborough, NJ, United States

Session Co-Chair: Olga Sankowski, Hamburg University ofTechnology, Hamburg, Hamburg, Germany

3:45pm – Effective Design Team Composition UsingIndividual and Group Cognitive AttributesTechnical Paper Publication. IMECE2018-86888Kaitlyn Fritz, Line Deschenes, Vijitashwa Pandey, OaklandUniversity, Rochester, MI, United States

4:06pm – Application of Moving Particle Simulation Methodto Transmission Design ProcessTechnical Presentation. IMECE2018-87310Chulmin Ahn, Hyundai Motor Group, Hwaseong-si, Gyeonggi-do, Korea (Republic)

4:27pm – Using Multi-Channel Human-System Interactionfor User-Centered Product DesignTechnical Paper Publication. IMECE2018-88091Olga Sankowski, Dieter Krause, Hamburg University ofTechnology, Hamburg, Hamburg, Germany

4:48pm – Hand Design Selection for Precision Grasping ofSmall Objects Based on Hand-object System WorkspaceTechnical Presentation. IMECE2018-89640Roshan Kumar Hota, Indian Institute of Technology,Kharagpur, Kharagpur, West Bengal, India, Kumar Cheruvu,Indian Institute of Technology Kharagpur, Kharagpur, India

5:09pm – A Systems Engineering Approach toIncorporating the Internet of Things to Reliability-RiskModeling for Ranking Conceptual DesignsTechnical Paper Publication. IMECE2018-86711Anthony D. Angelo, U.S. Army ARDEC, Hillsborough, NJ,United States, Edwin K.P. Chong, Colorado State University,Ft. Collins, CO, United States

5-8 RELIABILITY AND RISK IN ENERGYSYSTEMS5-8-1 Reliability and Risk in Energy SystemsThird Floor, David L. Lawrence Convention Center, Room 304

3:45pm–5:30pm

Session Chair: Guangdong Zhu, NREL, Englewood, CO,United States

3:45pm – A Novel Hybrid Strategy for Multimode OperationMapping and Feature Extraction on Data-Driven StatisticalFault Detection MethodsTechnical Paper Publication. IMECE2018-87417Horacio Pinzon, Cinthia Audivet, Melitsa Torres, MarlonConsuegra, Javier Alexander, Marco Sanjuan, Promigas,Barranquilla, Colombia

4:06pm – Seismic Probabilistic Risk Assessment of NuclearPower Plants: 10 CFR 50.69 Assumptions and Sources ofUncertaintyTechnical Paper Publication. IMECE2018-87677Sara Lyons, U.S. Nuclear Regulatory Commission,Kensington, MD, United States, Shilp Vasavada, U.S. NuclearRegulatory Commission, Washington, DC, United States

4:27pm – Life Assessment of Gas Turbine Blades UnderCreep Failure Mechanism Considering HumidityTechnical Paper Publication. IMECE2018-87883Bita Soltanmohammadlou, Sahand University of Technology,Tabriz, East Azarbaijan, Iran, Mohammad Pourgol-Mohammad, JCI/Sahand University of Technology, York, PA,United States, Mojtaba Yazdani, Sahand University ofTechnology, Tabriz, East Azarbaijan, Iran

4:48pm – Accelerated Degradation Testing of Rigid WetCooling Media to Analyse the Impact of Calcium ScalingTechnical Paper Publication. IMECE2018-88508Hemanth Narayan Dakshinamurthy, Ashwin Siddarth,University of Texas at Arlington, Arlington, TX, United States,Abhishek Guhe, Mestex, A Division of Mestek Inc., Dallas, TX,United States, Rajesh Kasukurthy, University of Texas atArlington, Arlington, TX, United States, James Hoverson,Mestex, A Division of Mestek Inc., Dallas, TX, United States,Dereje Agonafer, University of TTX, United States


59

5:09pm – Adhesion Durability in Photovoltaic Backsheetsas a Function of Indoor Accelerated Weathering ExposureTechnical Presentation. IMECE2018-89704Scott Julien, Jianfeng Sun, Northeastern University, Boston,MA, United States, Yu Wang, Case Western ReserveUniversity, Cleveland, OH, United States, Andrew Fairbrother,Xiaohong Gu, National Institute of Standards and Technology,Gaithersburg, MD, United States, Sophie Napoli, Arkema, Inc.,King of Prussia, PA, United States, Liang Ji, Kenneth P.Boyce, Underwriters Laboratories, LLC, Northbrook, IL, UnitedStates, Michael Kempe, National Renewable EnergyLaboratory, Golden, CO, United States, Roger H. French,Laura S. Bruckman, Case Western Reserve University,Cleveland, OH, United States, Gregory S. O’Brien, Adam W.Hauser, Arkema, Inc., King of Prussia, PA, United States, KaiTak Wan, Northeastern University, Boston, MA, United States

5-13 SAFETY, RISK AND RELIABILITY OFEMERGING TECHNOLOGIES5-13-1 Safety, Risk and Reliability of EmergingTechnologiesThird Floor, David L. Lawrence Convention Center, Room 305

3:45pm–5:30pm


Session Co-Chair: Jeremy M. Gernand, Pennsylvania StateUniversity, University Park, PA, United States

3:45pm – Examining Pulmonary Toxicity of EngineeredNanoparticles Using Clustering for Safe Exposure LimitsTechnical Paper Publication. IMECE2018-87431Vignesh Ramchandran, Pennsylvania State University,University Park, PA, United States, Jeremy Gernand,Pennsylvania State University, Port Matilda, PA, United States

4:06pm – Limit Load Analysis of As-Fabricated Pipe BendsWith Low Ovality Under In-Plane Closing Moment Loadingand Internal PressureTechnical Paper Publication. IMECE2018-88004Sherif Sorour, Mostafa Shazly, The British University in Egypt,El Sherouk City, Egypt, Mohammad Megahed, CairoUniversity, Giza, Cairo, Egypt

4:27pm – Real-Time Fault Diagnosis of Rotating MachineryBased on Improved 1-D Convolutional Neural NetworkUnder Noisy EnvironmentTechnical Presentation. IMECE2018-88878Liu Xingchen, Qi Caizhou, Zhao Jiong, Shen Hehong, XiongXiaolei, Tongji University, Shanghai, Shanghai, China

4:48pm – Flammability Risk Assessment of MildlyFlammable Refrigerant Leak From Roof Top UnitTechnical Presentation. IMECE2018-89011Ahmed Elatar, Ahmad Abu-Heiba, Mingkan Zhang, OakRidge National Laboratory, Oak Ridge, TN, United States,Kevin Dean Edwards, Oak Ridge National Laboratory,Knoxville, TN, United States, Viral Patel, Van Baxter, OakRidge National Laboratory, Oak Ridge, TN, United States,Omar Abdelaziz, Cleat Consulting, Dubai, United Arab Emir.

5:09pm – Uncertainty Optimization Design of Vehicle WheelMade of Long Glass Fiber Reinforced ThermoplasticTechnical Paper Publication. IMECE2018-86769Daijun Hu, Yingchun Shan, Xiandong Liu, Weihao Chai,Beihang University, Beijing, China, Xiaoyin Wang, Pan AsiaTechnical Automotive Center Co., Ltd., Shanghai, China

5-16 SAFETY IN TRANSPORTATION,AGRICULTURE, AND OFF-ROAD VEHICLES5-16-2 Safety in Transportation, Agriculture, and Off-Road VehiclesFourth Floor, David L. Lawrence Convention Center, Room 406

3:45pm–5:30pm


3:45pm – Vulnerability Analysis of Link-Weighted ShanghaiMetrorail Transit NetworkTechnical Paper Publication. IMECE2018-86863Yanjie Zhang, Tongji University, Shanghai, China, YaldaSaadat, University of Maryland College Park, College Park,MD, United States, Dongming Zhang, Tongji University,Shanghai, China, Bilal Ayyub, University of Maryland CollegePark, College Park, MD, United States, Hongwei Huang,Tongji University, Shanghai, China

4:06pm – Design, Installation, and Validation of a DataAcquisition SystemTechnical Paper Publication. IMECE2018-87071Yucheng Liu, Andrew LeClair, Matthew Doude, Reuben F.Burch V, Mississippi State University, Mississippi State, MS,United States

4:27pm – A Model Based Framework for Wheel LockSimulation in a Brake Dynamometer Towards Heavy RoadVehicle SafetyTechnical Paper Publication. IMECE2018-87230Indeevar Shyam Lanka, Akhil Challa, Nithya Sridhar, IndianInstitute of Technology Madras, Chennai, India, SankarganeshSankaralingam, Madras Engineering Industries PrivateLimited, Chennai, India, Shankar Coimbatore Subramanian,Indian Institute of Technology, Madras, Chennai, India,Gunasekaran Vivekanandan, Madras Engineering IndustriesPrivate Limited, Chennai, India

4:48pm – Post-Failure Recovery Strategies for MetrorailTransit Networks With Washington D.C. as a Case StudyTechnical Paper Publication. IMECE2018-87471Yalda Saadat, University of Maryland College Park, CollegePark, MD, United States, Yanjie Zhang, Dongming Zhang,Hongwei Huang, Tongji University, Shanghai, China, BilalAyyub, University of Maryland College Park, College Park, MD,United States

5:09pm – Analytical Vehicle KANO Model DevelopmentTechnical Paper Publication. IMECE2018-87825Jiaquan Chen, FAW, Rochester, MI, United States, Yin-pingChang, Oakland University


60


5-19 DESIGN, RELIABILITY, SAFETY, ANDRISK PLENARY5-19-1 Design, Reliability, Safety, and Risk PlenaryThird Floor, David L. Lawrence Convention Center, Room 304

8:00am–8:45am

8:00am – Autonomous Vehicle Safety: Tomorrow’s RewardsVersus Today’s RealityPlenary Presentation. IMECE2018-90096Roger McCarthy, McCarthy Engineering, Palo Alto, CA, UnitedStates

5-1 PRODUCT AND PROCESS DESIGN5-1-4 Product and Process Design IVThird Floor, David L. Lawrence Convention Center, Room 303

10:00am–11:45am

Session Chair: Giorgio Colombo, Politecnico di Milano, Milan,Italy

Session Co-Chair: Ragavanantham Shanmugam, AnnaUniversity, Chennai, India

10:00am – Design and Development of a Low-Cost RoofTop Solar VentilatorTechnical Paper Publication. IMECE2018-86997Ragavanantham Shanmugam, Anna University, Chennai,India, Umayakumar Vellaisamy, Larsen and Toubro Limited,Chennai, India, Karthikeyan Balasubramaniam, Wheels IndiaLimited, Chennai, India, Sathishkumar Mani, Anna University,Chennai, India

10:21am – A Small-Scale Robotic Spill Detection andCleaning MethodTechnical Paper Publication. IMECE2018-87180Hussain F. Alsaif, Houssam Antar, Demitri Baker, AshmitaTandon, Jack Manning, Guohua Ma, James McCusker,Wentworth Institute of Technology, Boston, MA, United States

10:42am – Unmanned Underwater Drone Design for OceanExplorationTechnical Paper Publication. IMECE2018-87649Rojitha Goonesekere, Yu Guo, Midwestern State University,Wichita Falls, TX, United States

11:03am – Nuclear Storage Cask Inspection Robotics as aCase Study in System Design ChallengesTechnical Paper Publication. IMECE2018-88374Jen Bracken, Sean N. Brennan, Ian Van Sant, PennsylvaniaState University, University Park, PA, United States, CliffLissenden, Pennsylvania State University, State College, PA,United States, Karl Reichard, Pennsylvania State University,University Park, PA, United States

11:24am – The Improved Model of Particle ShapePrediction Considering the Choke-Level Effect for ConeCrusherTechnical Paper Publication. IMECE2018-88603Wei Zhang, Wang Jixin, Jilin University, Changchun, China, Yu Xiangjun, Kunming University, Kunming, China

5-4 CAD, CAM AND CAE DESIGN5-4-1 CAD, CAM and CAE Design IThird Floor, David L. Lawrence Convention Center, Room 304

10:00am–11:45am

Session Chair: Marco Rossoni, Politecnico di Milano, Milan,Italy


10:00am – Computational Design and Analysis of Nitinol-Based Arch Wedge SupportTechnical Paper Publication. IMECE2018-86287Tyler N. Stranburg, Yucheng Liu, Harish Chander, AdamKnight, Mississippi State University, Mississippi State, MS,United States

10:21am – Analysis of Reciprocating Seals in the Wet-MateElectrical Connectors for Underwater ApplicationsTechnical Paper Publication. IMECE2018-86988Quan Han, Yan Zhang, Haiyang Chen, Juekuan Yang, Yunfei Chen, Southeast University, Nanjing, Jiangsu, China

10:42am – BIM Integration to Railway Projects —CaseStudyTechnical Presentation. IMECE2018-88851Mounir Bensalah, Ibn Tofail University, ENSAK - Colas RailMaroc, Casablanca, Morocco, Abdelmajid Elouadi, HassanMharzi, Ibn Tofail University, ENSAK, Kénitra, Morocco

11:03am – A Big Shift in Engineering: What Issues areExpected and How We Could Possibly Deal With ThemTechnical Presentation. IMECE2018-89170Shuichi Fukuda, Keio University, Minato-ku, Tokyo, Japan

11:24am – An Algorithm for Similar 3D Model DifferenceExamination Using Geometric MatchingTechnical Paper Publication. IMECE2018-86996Lianshui Guo, Yue Yin, Beihang University, Beijing, China

TRACK 5 DESIGN, RELIABILITY, SAFETY, AND RISK – TUESDAY, NOVEMBER 13

61

5-10 GENERAL TOPICS ON RISK, SAFETYAND RELIABILITY5-10-1 Topics on Safety and Hazard AnalysisThird Floor, David L. Lawrence Convention Center, Room 305

10:00am–11:45am

Session Chair: Bin Zhou, FM Global, Norwood, MA, UnitedStates

Session Co-Chair: Arun Veeramany, Pacific NorthwestNational Laboratory, Richland, WA, United States

10:00am – Occupational Safety Implications of theChanging Energy MixTechnical Paper Publication. IMECE2018-86678Jeremy Gernand, Pennsylvania State University, Port Matilda,PA, United States

10:21am – Track Shape, Resulting Dynamics, and InjuryRates of GreyhoundsTechnical Paper Publication. IMECE2018-87156Fatemeh Mahdavi, Md. Imam Hossain, Hasti Hayati, PaulKennedy, David Eager, University of Technology Sydney,Sydney, NSW, Australia

10:42am – Engineering a Pool Ladder to Prevent Drowningsin Above-Ground PoolsTechnical Paper Publication. IMECE2018-87875William Pierce, Richard Ziernicki, Knott Laboratory LLC,Centennial, CO, United States

11:03am – A Set of Preliminary Model Experiments forStudying Engineering Student Biases in the Assessmentand Prioritization of RisksTechnical Paper Publication. IMECE2018-87888Jeremy Gernand, Pennsylvania State University, Port Matilda,PA, United States

11:24am – Design and Testing of a Novel Human VibrationMeasurement System to Analyze the Connection BetweenVibration Exposure and Hearing LossTechnical Presentation. IMECE2018-89867Olivia Bridston, Gaelen Murray, Zac Oldham, GonzagaUniversity, Spokane, WA, United States

5-2 SOCIAL CONTEXT AWARE DESIGN5-2-1 Social Context Aware DesignThird Floor, David L. Lawrence Convention Center, Room 303

1:45pm–3:30pm

Session Chair: Shuichi Fukuda, Keio University, Minato-ku,Tokyo, Japan

Session Co-Chair: Marco Rossoni, Politecnico di Milano,Milano, Italy

1:45pm – Printed and 360 Head-Mounted DisplayRendering: A Cross-Cultural Study Comparing Utility,Spatial Representation and Emotional CapabilitiesTechnical Paper Publication. IMECE2018-87163Juan-Carlos Rojas, Tecnologico de Monterrey, Monterrey,Nuevo León, Mexico, Juan Luis Higuera-Trujillo, UniversitatPolitècnica de València, Valencia, Valencia, Spain, RobertoMora-Salinas, Tecnológico de Monterrey, Puebla, Puebla,Mexico, Jessica Galindo, Tecnologico de Monterrey, Puebla,Mexico, Susana Iñarra Abad, Universitat Politècnica deValència - I3B, Valencia, Spain

2:06pm – Binomial Parameter Estimation and Mapping forDemand Prediction: A Case Study of Bike Sharing StationExpansion DesignTechnical Paper Publication. IMECE2018-87865Bryan Watson, Cassandra Telenko, Georgia Institute ofTechnology, Atlanta, GA, United States

2:27pm – Scalability Considerations in the Design ofMicrogrids to Support Socioeconomic Development inRural CommunitiesTechnical Paper Publication. IMECE2018-88441Hailie Suk, University at Buffalo, State University of New York,Buffalo, NY, United States, Abhishek Yadav, University ofOklahoma, Norman, OK, United States, John Hall, Universityat Buffalo, State University of New York, Buffalo, NY, UnitedStates

2:48pm – Decision Making Under Severe Uncertainty inEngineering ProjectsTechnical Presentation. IMECE2018-89744Sara Naranjo Corona, Oakland University, Clarkston, MI,United States, Vijitashwa Pandey, Judson Estes, OaklandUniversity, Rochester, MI, United States

3:09pm – From Customer Requirements to Detailed Design:How Do Product Data Change?Technical Paper Publication. IMECE2018-87900Marco Rossoni, Giorgio Colombo, Luca Bergonzi,Politecnico di Milano, Milan, Italy


62

5-4 CAD, CAM AND CAE DESIGN5-4-2 CAD, CAM and CAE Design IIThird Floor, David L. Lawrence Convention Center, Room 304

1:45pm–3:30pm

Session Chair: Daniele Regazzoni, University of Bergamo,Dalmine (BG), Italy

Session Co-Chair: Jorge D. Camba, Purdue University, WestLafayette, IN, United States

1:45pm – A Study on Sampling Strategies to Determine theVariability of Parametric History-Based 3D CAD ModelsTechnical Paper Publication. IMECE2018-87404Manuel Contero, Ferran Naya, David Pérez-López,Universitat Politècnica de València, Valencia, Spain, PedroCompany, Universitat Jaume I, Castellón, Castellón, Spain,Jorge D. Camba, Purdue University, West Lafayette, IN, UnitedStates

2:06pm – Motion Capture and Data Elaboration to AnalyzeWheelchair Setup and Users’ PerformanceTechnical Paper Publication. IMECE2018-87531Daniele Regazzoni, Andrea Vitali, University of Bergamo,Dalmine (BG), Italy, Caterina Rizzi, University of Bergamo,Rho (MI), Italy, Filippo Colombo Zefinetti, University ofBergamo, Dalmine (BG), Italy

2:27pm – Research on a Multi-Fidelity Surrogate ModelBased Model Updating StrategyTechnical Paper Publication. IMECE2018-88421Ping Wang, Qingmiao Wang, Xin Yang, Chongqing University,Chongqing, China, Zhenfei Zhan, Chongqing University,Livonia, MI, United States

2:48pm – Extending Model Based Definition (MBD) toCapture Product Behavior and Contextual InformationUsing a Model Based Feature Information Network (MFIN)Technical Presentation. IMECE2018-89646Saikiran Gopalakrishnan, Kevin J. Del Re, Purdue University,West Lafayette, IN, United States, Daniel Campbell, Capvidia,Sugar Land, TX, United States, Rosemary Astheimer, MichaelD. Sangid, Nathan W. Hartman, Purdue University, WestLafayette, IN, United States

3:09pm – Identification, Modeling and ExperimentalCharacterization of Oil/Gas Drill Pipe FailureTechnical Presentation. IMECE2018-88815Jamil Abdo, Frostburg State University, Frostburg, MD, UnitedStates, Edris Hassan, Sultan Qaboos University, Muscat,Oman, Jan Kwak, Qatar University, Doha, Qatar

5-10 GENERAL TOPICS ON RISK, SAFETYAND RELIABILITY5-10-2 Topics on Risk and Hazard AnalysisThird Floor, David L. Lawrence Convention Center, Room 305

1:45pm–3:30pm


Session Co-Chair: Javad Sattarvand, University of Nevada,Reno, NV, United States

1:45pm – Escalator Risk and Assessment of Safety ReviewTechnical Paper Publication. IMECE2018-87889Thomas Bress, Exponent, Bowie, MD, United States, Eugenia Kennedy, Exponent, Natick, MA, United States, Rob Kupkovits, Exponent, Atlanta, GA, United States

2:00pm – Equipment Fault Diagnosis Based on ImageRecognition From Sensor Network Using Deep LearningTechnical Presentation. IMECE2018-89156Tingting Wei, Ma Shixi, Dengji Zhou, Shanghai Jiao TongUniversity, Shanghai, China

2:15pm – Flexible Parametric Proportional Hazard Modelfor Performance Assessment in Complex Systems: CaseStudy of Mining EquipmentTechnical Presentation. IMECE2018-89315Amin Moniri-Morad, Sahand University of Technology, Tabriz,East Azarbaijan, Iran, Mohammad Pourgol-Mohammad,JCI/Sahand University of Technology, York, PA, United States,Amid Agha Babaei, Sahand University of Technology, Tabriz,East Azarbaijan, Iran, Javad Sattarvand, University of Nevada,Reno, NV, United States

2:30pm – Study on the Structural Stability Evaluation ofTelescopic Boom Crane for ROV LarsTechnical Presentation. IMECE2018-89076Namsub Woo, Young Ju Kim, Hyunji Kim, Sangmok Han,Korea Institute of Geoscience and Mineral Resources, Pohang,Korea (Republic), Jiho Ha, Korea Institute of Geoscience andMineral Resources, Pohang-si, Gyeongsangbuk-do, Korea(Republic), Sunchul Huh, Gyeongsang National University,Tongyeong-si, Gyeongsangnam-do, Korea (Republic)

2:45pm – Numerical Analysis of PropagationCharacteristics of Hazard and Noxious Substance (HNS)Based on the Kriging ModelTechnical Presentation. IMECE2018-88830Seong Hyuk Lee, C.H. Jeong, Min Kyu Ko, Chung-AngUniversity, Seoul, Korea (Republic), Moonjin Lee, KRISO,Daejeon, Korea (Republic), Joo Hyun Moon, Chung-AngUniversity, Seoul, Korea (Republic)

3:00pm – Remaining Useful Life (RUL) Prediction of RollingElement Bearing Using Random Forest and GradientBoosting TechniqueTechnical Paper Publication. IMECE2018-87623Sangram Patil, Aum Patil, Vishwadeep Handikherkar, Sumit Desai, Vikas Phalle, Faruk Kazi, VTechnological Institute, Mumbai, Maharashtra, India


63

5-18 GENERAL5-18-1 GeneralThird Floor, David L. Lawrence Convention Center, Room 302

3:45pm–5:30pm


3:45pm – How Much Is Too Much for a Seatback Recline toPromote Occupant Submarining: A Study Using Rigid SeatSled Model and 5th Percentile Female ATDTechnical Paper Publication. IMECE2018-86258Chandra Thorbole, TST LLC, Rogers, AR, United States

4:27pm – Extension Injuries During Motor Vehicle Collisionsin Thoracic Spines With Pre-Existing PathologyTechnical Paper Publication. IMECE2018-86701Mathieu Davis, Jessica Isaacs, Exponent, Philadelphia, PA,United States, Sridhar Natarajan, Exponent, Phoenix, AZ,United States, Amy Mumbower, UT Health San Antonio, SanAntonio, TX, United States, Jacob Fisher, Exponent,Philadelphia, PA, United States

4:48pm – Assessing Occupant Motion and Seat BackPerformance of Contemporary Seats in Rear ImpactCollisionsTechnical Paper Publication. IMECE2018-87997Steven Meyer, Arin Nelson, Jeremy McMillin, Brian Herbst,Safety Analysis & Forensic Engineering (SAFE) LaboratoriesLLC, Goleta, CA, United States

5:09pm – Comparison Study on Reliability Index Approach,Performance Measure Approach and Monte CarloSimulation Method for Pipeline Reliability EvaluationTechnical Presentation. IMECE2018-87326Shabbir Memon, Obaidur Rahman Mohammed, HamidLankarani, Wichita State University, Wichita, KS, United States

5-18-2 GeneralThird Floor, David L. Lawrence Convention Center, Room 303

3:45pm–5:30pm


3:45pm – A Decision-Based Mobility Model and Value ofInformation for Autonomous Ground VehiclesTechnical Presentation. IMECE2018-89630Sam Kassoumeh, Line Deschenes, Vijitashwa Pandey,Oakland University, Rochester, MI, United States,David Gorsich, U.S. Army RDECOM - TARDEC, Warren, MI,United States

4:06pm – Design of Smart Electromagnetic Clutch andDevelopment of Control Algorithm for Implementation in a4-WheelerTechnical Presentation. IMECE2018-88759Vedanth Reddy, National institute of Technology Suratkal-Karnataka, Suratkal, Karnataka, India

4:27pm – Calculation of Neck Loads in Minor ImpactTechnical Paper Publication. IMECE2018-88655John Wiechel, SEA, Limited, Columbus, OH, United States

4:48pm – Mitigating Vehicle Incompatibility in Rear ImpactsTechnical Paper Publication. IMECE2018-88268Christopher Clarke, SAFE, Santa Barbara, CA, United States, Steven Meyer, SAFE LLC, Goleta, CA, United States, Brian Herbst, SAFE Laboratories LLC, Goleta, CA, UnitedStates, Lauren Bell, SAFE, Santa Barbara, CA, United States

5:09pm – Analysis of Deformation Induced Vehicle DoorLatch ActuationTechnical Paper Publication. IMECE2018-88205Christopher Clarke, SAFE, Santa Barbara, CA, United States,Steven Meyer, Brian Herbst, SAFE Laboratories LLC, Goleta,CA, United States, Lauren Bell, SAFE, Santa Barbara, CA,United States


64

6-1-1: Dynamics, Vibration, and Control Plenary

6-2-1: Dynamics, Vibration, and Control – I

6-2-2: Dynamics, Vibration, and Control – II

6-3-1: Nonlinear Dynamics, Control, and Stochastic Mechanics I

6-3-2: Nonlinear Dynamics, Control, and Stochastic Mechanics II

6-4-1: Robot Control I

6-4-2: Robot Control II

6-4-3: Robot Design I

6-4-4: Robot Design II

6-4-5: Mechanism Design I

6-4-6: Mechanism Design II

6-4-7: Compliant Mechanisms

6-5-1: Fluid-Structure Interaction I

6-5-2: Fluid-Structure Interaction II

6-6-1: Vibration, Noise Control and DampingTechnologies I

6-6-2: Vibration, Noise Control and DampingTechnologies II

6-6-3: Vibration, Noise Control and Damping Technologies III

6-7-1: Dynamics and Control in Micro/Nano Engineering I

6-8-1: Mechanics of Smart Structures

6-8-2: Energy Harvesting and Transducers

6-9-1: Novel Control of Dynamic System I

6-9-2: Novel Control of Dynamic System II

6-10-1: Multibody Dynamic Systems and Applications I

6-10-2: Multibody Dynamic Systems and Applications II

6-10-3: Multibody Dynamic Systems and Applications III

6-11-1: Vibrations of Continuous Systems I

6-11-2: Vibrations of Continuous Systems II

6-12-1: Mobile Service Robots and Unmanned Vehicles I

6-12-2: Mobile Service Robots and Unmanned Vehicles II

6-13-1: ControlTheory and Applications I

6-15-1: Measurement and Analysis Techniques in Nonlinear Dynamics I

6-17-1: Multi-Physics Dynamics-Control & Diagnostics-Prognostics of Structures I

6-19-1: Renewable Energy, Structural Health Monitoring, and DistributedStructural Systems I

6-20-1: Dynamics, Vibration, and Control for Structural Health MonitoringApplications I

Track OrganizersDumitru Caruntu, University of Texas

Rio Grande Valley, United States Bogdan Epureanu, University of

Michigan, United StatesMarco Amabili, McGill University,

Canada

Topic OrganizersDumitru Caruntu, University of Texas

Rio Grande Valley, United States Bogdan Epureanu, University of

Michigan, United States Marco Amabili, McGill University,

CanadaZhibin Lin, North Dakota State University,

United States Xiangqing Tangpong, North Dakota State

University, United States Ying Huang, North Dakota State

University, United StatesHong Zhou, Texas A&M University-

Kingsville, United States Puren Ouyang, Ryerson University,

CanadaKostas Karazis, Framatome Inc., United

StatesDennis Gottuso, AREVA, United States Farbod Alijani, Technical University of

Delft, NetherlandsBrian Painter, Framatome Inc., United

States Rinaldo Garziera, Universitry of Parma,

Italy Eleonora Tubaldi, University of Arizona,

United StatesHuancai Lu, Zhejiang University of

Technology, China Chin-An Tan, Wayne State University,

United States Donald Michael McFarland, University

of Illinois at Urbana-Champaign,United States

Hornsen(HS) Tzou, Nanjing University ofAeronautics and Astronautics, China

Hua Li, Zhejiang University, China Lifeng Wang, Nanjing University of

Aeronautics and Astronautics, ChinaC. Steve Suh, Texas A&M University,

United States Weidong Zhu, University of Maryland,

Baltimore County, United States

Shanzhong (Shawn) Duan, Saint Martin’sUniversity, United States

William Prescott, Siemens ProductLifecycle Management, United States

Ilie Talpasanu, Wentworth Institute ofTechnology, United States

Marco Amabili, McGill University,Canada

Giuseppe Quaglia, Politecnico DiTorino – DIMEAS, Italy

Luca Bruzzone, DIMEC – Università degliStudi di Genova, Italy

Giulio Reina, U Salento, Italy Renato Vidoni, Free University of

Bolzano, ItalyMajura Selekwa, North Dakota State

University, United States Dale McDonald, Gonzaga University,

United StatesPezhman Hassanpour, Loyola

Marymount University, United StatesIoannis Georgiou, Nat'l Tech University of

Athens, Greece Francesco Romeo, SAPIENZA Universita

of Roma, ItalyNikolaos Xiros, University of New


C. Steve Suh, Texas A&M University,United States


Session OrganizersChristopher Jobes, NIOSH, United

StatesAshkan Eslaminejad, North Dakota State

University, United StatesSohel Anwar, Indiana University-Purdue

University Indianapolis, United StatesIsaac Elishakoff, Florida Atlantic

University, United StatesHo-Hoon Lee, Southeastern LA

University, United States Yong Zhu, Wilkes University, United

StatesYoram Halevi, Tech-israel Institute of

Tech, Israel Wooram Park, University of Texas at

Dallas, United StatesVivek Sangwan, Indian Institute of

Technology Bombay, India

Kiwon Sohn, University of Hartford,United States

He Shen, California State University, LosAngeles, United States

Yin-ping Chang, Oakland University,United States

Sebastian Roa Prada, UniversidadAutonoma de Bucaramanga, Colombia

Hong Zhou, Texas A&M University-Kingsville, United States

Naoufel Azouz, University of Evry, FranceAyse Tekes, Kennesaw State University,

United StatesRobley G. Kirk, Virginia Tech, United

StatesAkintoye O. Oyelade, University of

Lagos, NigeriaAshok Belegundu, Pennsylvania State

Univ, United StatesSaad Ilyas, King Abdullah University of

Science & Tech, Saudi ArabiaHornsen(HS) Tzou, Nanjing University of

Aeronautics and Astronautics, ChinaC. Steve Suh, Texas A&M University,

United StatesShanzhong (Shawn) Duan, Saint Martin's

University, United States Isaac Elishakoff, Florida Atlantic

University, United StatesBerkan Alanbay, Virginia Tech, United

StatesIbrahim F Gebrel, University of Western

Ontario, CanadaAman Kumar, Indian Institute of

Technology Kharagpur, India Mustapha Fofana, Worcester Polytechnic

Inst, United StatesGiuseppe Quaglia, Politecnico Di

Torino – DIMEAS, ItalyJacob A. Farber, University of Pittsburgh,

United StatesPezhman Hassanpour, Loyola

Marymount University, United StatesNikolaos Xiros, University of New



TRACK 6 DYNAMICS, VIBRATION, ANDCONTROLMONDAY, NOVEMBER 12

6-4 DESIGN AND CONTROL OF ROBOTS,MECHANISMS AND STRUCTURES6-4-1 Robot Control IThird Floor, David L. Lawrence Convention Center, Room 307

9:45am–11:30am

Session Chair: Ho-Hoon Lee, Southeastern LouisianaUniversity, Hammond, LA, United States

Session Co-Chair: Yong Zhu, Wilkes University, Wilkes-Barre,PA, United States

9:45am – Control of a Robotic Prosthetic Hand Using anEMG Signal Based CounterTechnical Paper Publication. IMECE2018-86032Kyle Stanek, Nathan Barnhart, Yong Zhu, Wilkes University,Wilkes-Barre, PA, United States

10:06am – Dynamic Modeling and Control of the HexapodRobot Using Matlab SimMechanicsTechnical Paper Publication. IMECE2018-88226Sameh I. Beaber, Military Technical College, Cairo, Cairo,Egypt, Abdelrahman Zaghloul, McMaster University,Hamilton, ON, Canada, Mohamed Kamel, Wessam Hussein,Military Technical College, Cairo, Egypt

10:27am – Simultaneously Satisfying Multi-ObjectiveDesign of Structural and Control Systems Based onConsideration of Uncertainty by Set-Based ApproachTechnical Paper Publication. IMECE2018-86757Haruo Ishikawa, Naoko Sasaki, The Electro-Communications, Chofu, Japan

10:48am – Control for a Two-Link Planar Robot With anActuated TailTechnical Paper Publication. IMECE2018-86827Xinjia Yu, Carnegie Mellon University, Pittsburgh, PA, UnitedStates, Mark Bedillion, Carnegie Mellon University, Gibsonia,PA, United States

11:09am – A Path-Generating Motion Control Scheme for aMobile Robot in the Environment of ObstaclesTechnical Paper Publication. IMECE2018-86524Ho-Hoon Lee, Southeastern Louisiana University, Hammond,LA, United States

6-4-7 Compliant MechanismsThird Floor, David L. Lawrence Convention Center, Room 308

9:45am–11:30am

Session Chair: Hong Zhou, Texas A&M University-Kingsville,Kingsville, TX, United States

Session Co-Chair: Ayse Tekes, Kennesaw State University,Marietta, GA, United States

9:45am – Compliant Translational Double Exact DwellMechanismTechnical Paper Publication. IMECE2018-86073Ayse Tekes, Hongkuan Lin, Kennesaw State University,Marietta, GA, United States

10:06am – On Novel Dynamic Displacement AmplificationUsing Compliant MechanismsTechnical Paper Publication. IMECE2018-87638Abhijit Tanksale, Prasanna Gandhi, Indian Institute ofTechnology, Bombay, Mumbai, Maharashtra, India

10:27am – Reduction of Jerk Through Optimization of aKnee Assistive Device Designed Using Four-Bar ControlledCompliance ActuatorTechnical Paper Publication. IMECE2018-87012Saikat Sahoo, Aditya Jain, Dilip Pratihar, Indian Institute ofTechnology Kharagpur, Kharagpur, West Bengal, India

10:48am – Large Deformation Analysis and ExperimentsWith Double Parallelogram Compliant MechanismsTechnical Paper Publication. IMECE2018-87604Abhijit Tanksale, Prasanna Gandhi, Indian Institute ofTechnology, Bombay, Mumbai, Maharashtra, India

11:09am – Synthesizing Bidirectional Constant TorqueCompliant Mechanisms Using Precompressed BeamsTechnical Paper Publication. IMECE2018-86469Monik Thanaki, Hong Zhou, Texas A&M University-Kingsville,Kingsville, TX, United States

6-12 MOBILE SERVICE ROBOTS ANDUNMANNED VEHICLES6-12-1 Mobile Service Robots and UnmannedVehicles IThird Floor, David L. Lawrence Convention Center, Room 315

9:45am–11:30am

Session Chair: Giuseppe Quaglia, Politecnico di Torino, Torino,Italy

9:45am – Rese_Q: UGV for Rescue Tasks Functional DesignTechnical Paper Publication. IMECE2018-86395Giuseppe Quaglia, Paride Cavallone, Politecnico di Torino,Torino, Italy

TRACK 6 DYNAMICS, VIBRATION, AND CONTROL – MONDAY, NOVEMBER 12

65

10:06am – Image Identification of a Moving Object Basedon an Improved Canny Edge Detection AlgorithmTechnical Paper Publication. IMECE2018-86792Yang Liu, Lingyu Sun, Lijun Li, Yiben Zhang, BeihangUniversity, Beijing, China, Zongmiao Dai, Zhenkai Xiong,Zhengzhou Electromechanical Engineering Research Institute,Zhengzhou, China

10:27am – GA Optimized Formation Control of AutonomousUnderwater VehiclesTechnical Paper Publication. IMECE2018-87299Mansour Karkoub, Texas A&M University, College Station, TX,United States, Lotfi Romdhane, American University ofSharjah, Sharjah, United Arab Emir.

10:48am – Performance Analysis of UAV Visual LandmarkTracking Under Rapid MotionTechnical Paper Publication. IMECE2018-88345Eric Jacobson, Akin Tatoglu, University of Hartford, WestHartford, CT, United States

11:09am – On Self-Driving Car Safety: Occupancy MapModification With Rapid Emergency Vehicle DetectionTechnical Paper Publication. IMECE2018-88492Akin Tatoglu, Eoin King, Jarrett Lagler, University of Hartford,West Hartford, CT, United States

6-13 CONTROL THEORY ANDAPPLICATIONS6-13-1 Control Theory and Applications IThird Floor, David L. Lawrence Convention Center, Room 309

9:45am–11:30am

Session Chair: Jacob A. Farber, University of Pittsburgh,Pittsburgh, PA, United States

9:45am – Improving Boiler Efficiency Using PLC ControllerTechnical Paper Publication. IMECE2018-86100Hung Tang, TAI Engineering, York, PA, United States,Ma’moun Abu-Ayyad, Penn State Harrisburg, Middletwon, PA,United States

10:00am – Dynamic Exposure Model of Scanning BeamInterference LithographyTechnical Paper Publication. IMECE2018-86979Sen Lu, Kaiming Yang, Yu Zhu, Leijie Wang, Ming Zhang,Tsinghua University, Beijing, China

10:15am – Using Multiple-Model Adaptive Estimation andSystem Identification for Fault Detection in Nuclear PowerPlantsTechnical Paper Publication. IMECE2018-87616Jacob A. Farber, Daniel G. Cole, University of Pittsburgh,Pittsburgh, PA, United States

10:30am – Intelligent Adaptive Control for Anti-LockBraking SystemTechnical Paper Publication. IMECE2018-87659Wafa Batayneh, Jordan University of Science and Technology,Irbid, Jordan, Mohammad Jaradat, American University ofSharjah, Sharjah, United Arab Emir., Ahmad Bataineh, JordanUniversity of Science and Technology, Irbid, Jordan

10:45am – A Game-Theoretic Approach to DefendingNuclear Instrumentation and Control Systems From Cyber-ThreatsTechnical Paper Publication. IMECE2018-87713Lee T. Maccarone, Daniel G. Cole, University of Pittsburgh,Pittsburgh, PA, United States

11:00am – Application of the Levenberg-MarquardtAlgorithm to Control a Gough-Stewart PlatformTechnical Presentation. IMECE2018-89399David Gordon, Kevin Anderson, Nolan Tsuchiya, CaliforniaState Polytechnic University, Pomona, Pomona, CA, UnitedStates

6-15 MEASUREMENT AND ANALYSISTECHNIQUES IN NONLINEAR DYNAMIC6-15-1 Measurement and Analysis Techniques inNonlinear Dynamics IThird Floor, David L. Lawrence Convention Center, Room 311

9:45am–11:30am

Session Chair: Pezhman Hassanpour, Loyola MarymountUniversity, Los Angeles, CA, United States

9:45am – Effect of Eccentricity on the Nonlinear Dynamic Behavior of a Cam and Follower Mechanism With ClearanceTechnical Paper Publication. IMECE2018-86202Louay S. Yousuf, Auburn University, Walled Lake, MI, UnitedStates, Dan Marghitu, Auburn University, Auburn, AL, UnitedStates

10:06am – Numerical Modeling and Analysis of NonlinearDynamic Response for a Bolted Joint Beam ConsideringInterface Frictional ContactTechnical Paper Publication. IMECE2018-86743Dongwu Li, Chao Xu, Northwestern Polytechnical University,Xi’an, Shaanxi, China, Dong Wang, China Academy ofEngineering Physics, Mianyang, China, Lihua Wen,Northwestern Polytechnical University, Xi’an, Shaanxi, China

10:27am – An Improved Analytical Model of Friction andBall Motion in Linear Ball Bearings: With Application toBall-To-Ball Contact PredictionTechnical Paper Publication. IMECE2018-88033Bo Lin, Molong Duan, Chinedum Okwudire, University ofMichigan, Ann Arbor, MI, United States, Jason Wou, FordMotor Company, Dearborn, MI, United States

10:48am – Dynamic Characteristics of Resonant BeamsWith Passive Thermal Stress RegulatorsTechnical Paper Publication. IMECE2018-88536Tyler Kellar, Pezhman Hassanpour, Loyola Marymount


66

11:09am – Approximate Response of Beam-Type ResonantBiosensorsTechnical Paper Publication. IMECE2018-88535Pezhman Hassanpour, Loyola Marymount University, LosAngeles, CA, United States

6-17 MULTI-PHYSICS DYNAMICS-CONTROL& DIAGNOSTICS-PROGNOSTICS OFSTRUCTURES6-17-1 Multi-Physics Dynamics-Control &Diagnostics-Prognostics of Structures IThird Floor, David L. Lawrence Convention Center, Room 310

9:45am–11:30am

Session Chair: Nikolaos Xiros, University of New Orleans,Naval Arch & Marine Eng, New Orleans, LA, United States

9:45am – Toward a Contactless Hydrokinetic EnergyHarvester: A Computational Magnetic Field EstimationTechnical Paper Publication. IMECE2018-87063Georgios Tsakyridis, Nikolaos Xiros, University of NewOrleans, New Orleans, LA, United States, Michael Bernitsas,University of Michigan, Ann Arbor, MI, United States

10:06am – Research on a Mechanical Model of theConnecting and Sliding Parts in Motion for a ReciprocatingCompressorTechnical Paper Publication. IMECE2018-87392Yu Mizobe, Takashi Saito, Yamaguchi University,Ube/Yamaguchi, Japan, Yoshifumi Mori, TokuyamaCorporation, Yamaguchi, Japan

10:27am – Study on Dependency of Dynamic Properties ina Rolling Roller on Fine Coal Upon the Running VelocityTechnical Paper Publication. IMECE2018-87416Kentaro Oshiro, Yamaguchi University, Ube/Yamaguchi,Japan, Akira Kobayashi, Kazuhiro Watanabe, Emi Ohno,Makoto Echizenya, IHI Corporation, Koto-ku, Japan,Katsuhide Fujita, National Institute of Technology, UbeCollege, Ube, Japan, Takashi Saito, Yamaguchi University,Ube/Yamaguchi, Japan

10:48am – Shape Memory Alloy Based Rotational ActuatorTechnical Paper Publication. IMECE2018-87646Nicholas Hofmann, Michael Hennessey, University of St.Thomas, St. Paul, MN, United States

11:09am – System Identification for Control of a BowThruster With Brushless Motor and Shaft-Less PropellerTechnical Paper Publication. IMECE2018-88029Priyatham Sanjeeva Reddy Ramidi, Nikolaos Xiros,University of New Orleans, New Orleans, LA, United States,Stavros Lalizas, Anastasios Papavasileiou, VasileiosDouvris, Nikolas Theodorou, Alexandros Lalizas, LALIZASHellas, Piraeus, Piraeus, Greece

6-2 GENERAL6-2-1 Dynamics, Vibration, and Control-IThird Floor, David L. Lawrence Convention Center, Room 308

1:45pm–3:30pm

Session Chair: Christopher Jobes, NIOSH, Pittsburgh, PA,United States

Session Co-Chair: Ashkan Eslaminejad, North Dakota StateUniversity, Fargo, ND, United States

1:45pm – Identification of Lug Excitation Force by UsingThree-Dimensional Rigid Ring ModelTechnical Presentation. IMECE2018-86339Katsuhide Fujita, National Institute of Technology, UbeCollege, Ube, Japan, Takashi Saito, Yamaguchi University,Ube/Yamaguchi, Japan, Mitsugu Kaneko, Yanmar Co., Ltd.,Maibara, Japan

2:06pm – Development of Vehicle Seat by EmbeddingUrethane Within Air CellTechnical Paper Publication. IMECE2018-86389Shinichiro Ota, Yuji Nakamura, Okayama PrefecturalUniversity, Okayama, Japan

2:27pm – Dynamic Modeling System to Determine StoppingDistances of Mobile Underground Coal EquipmentTechnical Paper Publication. IMECE2018-86422Christopher Jobes, Jacob Carr, NIOSH, Pittsburgh, PA,United States

2:48pm – A Comparative Study of Rapid QuadrupedalSprinting and Turning Dynamics on Different Terrains andConditions: Racing Greyhounds Galloping DynamicsTechnical Paper Publication. IMECE2018-87144Hasti Hayati, University of Technology Sydney, Sydney,NSW, Australia, Paul Walker, Fatemeh Mahdavi, University of Technology Sydney, Ultimo, NSW, Australia, RobertStephenson, University of Technology Sydney, Sydney, NSW, Australia, Terry Brown, University of Technology Sydney, Ultimo, NSW, Australia, David Eager, University ofTechnology Sydney, Sydney, NSW, Australia

3:09pm – Numerical Research on Machining StabilitySubject to Delayed PID ControlTechnical Paper Publication. IMECE2018-87475Mingjie Li, Xiaojian Zhang, Yakun Xie, Huazhong Universityof Science and Technology, Wuhan City, China


67

6-4 DESIGN AND CONTROL OF ROBOTS,MECHANISMS AND STRUCTURES6-4-2 Robot Control IIThird Floor, David L. Lawrence Convention Center, Room 307

1:45pm–3:30pm

Session Chair: Yoram Halevi, Technion-Israel Institute ofTechnology, Technion City, Haifa, Israel

Session Co-Chair: Wooram Park, University of Texas at Dallas,Richardson, TX, United States

1:45pm – Brain-Computer Interface Application in RoboticGripper ControlTechnical Paper Publication. IMECE2018-86274Briana Landavazo, Vidya Nandikolla, California StateUniversity Northridge, Northridge, CA, United States

2:06pm – Minimum Energy Control of Redundant SystemsUsing Evolutionary Bi-Level OptimizationTechnical Paper Publication. IMECE2018-88709Uriel Nusbaum, Technion, Haifa, Israel, Miri Weiss Cohen,Braude College of Engineering, Karmiel, Israel, Yoram Halevi,Technion-Israel Institute of Technology, Technion City, Haifa,Israel

2:27pm – Light-Powered Soft RobotsTechnical Presentation. IMECE2018-89146Shengqiang Cai, University of California San Diego, La Jolla,CA, United States

2:48pm – Dynamic Analysis for Motor-Powered Periotomesin DentistryTechnical Paper Publication. IMECE2018-88196Jianping Lin, Om A. Sharma, Wooram Park, University ofTexas at Dallas, Richardson, TX, United States

3:09pm – Functional Design of a Robust Dynamic Positionand Data Acquisition SystemTechnical Paper Publication. IMECE2018-87993James Meyers, U.S. Coast Gaurd, Quincy, MA, United States,Tooran Emami, U.S. Coast Gaurd Academy, East Lyme, CT,United States

6-8 SMART STRUCTURES ANDSTRUCTRONIC SYSTEMS: SENSING,ENERGY GENERATION AND CONTROL6-8-1 Mechanics of Smart StructuresThird Floor, David L. Lawrence Convention Center, Room 309

1:45pm–3:30pm

Session Chair: Hornsen (HS) Tzou, Nanjing University ofAeronautics and Astronautics, Nanjing, Jiangsu, China

1:45pm – Development of Soft Body Rescue-Bot Using 3DPrintingTechnical Paper Publication. IMECE2018-86860Cody Lewis, Jared Legg, Minchul Shin, Georgia SouthernUniversity, Statesboro, GA, United States

2:00pm – Inductance of Twisted Nylon Actuators WithConductive WiresTechnical Presentation. IMECE2018-87214Hua Li, Haochen Ye, K.M. Hu, Zhejiang University, Hangzhou,China

2:15pm – Structural Self-Sensing by CapacitanceMeasurementTechnical Presentation. IMECE2018-87748Deborah D.L. Chung, Kairong Shi, Yulin Wang, Asma A.Eddib, University at Buffalo, State University of New York,Buffalo, NY, United States

2:30pm – Study on Large Deformation of LaminatedPiezoelectric Rectangular PlateTechnical Paper Publication. IMECE2018-88599Lihua Chen, Shoujie Cui, Beijing University of Technology,Beijing, China, Xiaozhi Zhang, University of Vermont,Burlington, VT, United States, Wei Zhang, Beijing University ofTechnology, Beijing, China

2:45pm – Frequency Control of Simply Supported Beam byLight-Activated Shape Memory PolymersTechnical Presentation. IMECE2018-88814Yang Yunze, Yuan Jihai, Fan Mu, Nanjing University ofAeronautics and Astronautics, Nanjing, Jiangsu, China

3:00pm – Mesh-Free Vibration Analysis of SuspendedStrain Gradient Nano-PlateTechnical Paper Publication. IMECE2018-87428Wang Li, Lifeng Wang, Jingnong Jiang, Nanjing University ofAeronautics and Astronautics, Nanjing, Jiangsu, China

6-9 NOVEL CONTROL OF DYNAMICSYSTEM AND6-9-1 Novel Control of Dynamic System IThird Floor, David L. Lawrence Convention Center, Room 310

1:45pm–3:30pm

Session Chair: C. Steve Suh, Texas A&M University, CollegeStation, TX, United States

1:45pm – A Novel Nonlinear Time-Frequency Strategy forStabilizing Inverted Pendulum Cart SystemTechnical Paper Publication. IMECE2018-86758Zilong Zhang, C. Steve Suh, Texas A&M University, CollegeStation, TX, United States

2:06pm – An Experimental Study of Periodic Motions in aDuffing OscillatorTechnical Paper Publication. IMECE2018-86833Yu Guo, Midwestern State University, Wichita Falls, TX, UnitedStates, Albert Luo, Southern Illinois University, Edwardsville,IL, United States, Abigail Reyes, Zeltzin Reyes, MidwesternState University, Wichita Falls, TX, United States

2:27pm – Period Motions in a Periodically Forced, DampedDouble PendulumTechnical Paper Publication. IMECE2018-86849Chuan Guo, Albert Luo, SoutherEdwards


68

2:48pm – On the Proper Description of Complex NetworkDynamicsTechnical Paper Publication. IMECE2018-88051Chun-Lin Yang, C. Steve Suh, Texas A&M University, CollegeStation, TX, United States

3:09pm – An Optimization Model of High-Speed and High-Precision Machining Based on Model Predictive ControlTechnical Paper Publication. IMECE2018-88326Jing Zhang, Jiexiong Ding, Qingzhao Li, Qicheng Ding,Zhong Jiang, Li Du, Wei Wang, University of ElectrionicScience and Technology of China, Chengdu, China

6-12 MOBILE SERVICE ROBOTS ANDUNMANNED VEHICLES6-12-2 Mobile Service Robots and UnmannedVehicles IIThird Floor, David L. Lawrence Convention Center, Room 315

1:45pm–3:30pm

Session Chair: Giuseppe Quaglia, Politecnico di Torino, Torino,Italy

1:45pm – Iterative Modeling of a Small UnderwaterTethered Remotely Operated VehicleTechnical Paper Publication. IMECE2018-88501Andrés F. Aldana, Helio Sneyder Esteban Villegas,Universidad Autonóma de Bucaramanga, Bucaramanga,Colombia, Sebastian Roa Prada, Universidad Autonoma deBucaramanga, Bucaramanga, Santander, Colombia

2:06pm – Design of a Robust Yaw Rate Controller UsingSliding Mode Control and Extended State Observer forNavigation of an Autonomous Ground VehicleTechnical Paper Publication. IMECE2018-88752Suraj Borate, Defence Institute of Advanced Technology,Pune, India, Shubhashisa Sahoo, Center for ArtificialIntelligence and Robotics, Bangalore, India, Devika K.B.,Shankar Coimbatore Subramanian, Indian Institute ofTechnology, Madras, Chennai, India, K.K. Mangrulkar,Defence Institute of Advanced Technology, Pune, India

2:27pm – Low-Light Pedestrian Recognition SystemTechnical Presentation. IMECE2018-88835Fei Lin, John E. Ball, Mississippi State University, Starkville,MS, United States

2:48pm – Advances in Multirobot Adaptive Navigation ofEnvironmental Scalar FieldsTechnical Presentation. IMECE2018-88910Christopher Kitts, Santa Clara University, Santa Clara, CA,United States

6-19 RENEWABLE ENERGY, STRUCTURALHEALTH MONITORING, ANDDISTRIBUTED STRUCTURAL SYSTEMS6-19-1 Renewable Energy, Structural HealthMonitoring, and Distributed Structural Systems IThird Floor, David L. Lawrence Convention Center, Room 311

1:45pm–3:30pm


1:45pm – Effectiveness of Using Mixed Coordinates inModeling Wind TurbinesTechnical Paper Publication. IMECE2018-87493Ayman A. Nada, Ali S. Al-Shahrani, Jazan University, Jazan,Saudi Arabia

2:06pm – Effect of Damage on the Normalized Frequency ofBeam-Like Structures Using Vibration Based TechniqueTechnical Presentation. IMECE2018-88788Putti Srinivasa Rao, Andhra University, Visakhapatnam,Andhra Pradesh, India, Siva Sankara Babu Chinka, LakireddyBalireddy College of Engineering, Mylavaram, India,Balakrishna Adavi, SRKR College of Engineering,Bhimavaram, India

2:27pm – Damage Recognition in Plate-Form StructuresUsing Changes in Modal Strain EnergyTechnical Presentation. IMECE2018-88798Putti Srinivasa Rao, Andhra University, Visakhapatnam,Andhra Pradesh, India, Ramesh Lanka, GudlavalleruEngineering College, Gudlavalleru, India

2:48pm – Proof Mass Study for Low Frequency VibrationEnergy Harvesting of Piezoelectric CantileverTechnical Paper Publication. IMECE2018-88163Lu Wang, Xi’an Jiaotong University, Xi’an, Shaanxi, China,Libo Zhao, Dejiang Lu, Chen Jia, Zhuangde Jiang, Xi’anJiaotong University, Xi’an, Shaanxi, China

3:09pm – Absolute Vibration Suppression (AVS) Control forFractional Order SystemsTechnical Presentation. IMECE2018-88710Yoram Halevi, Technion-Israel Institute of Tech, Technion City,Haifa, Israel

6-2 GENERAL6-2-2 Dynamics, Vibration, and Control-IIThird Floor, David L. Lawrence Convention Center, Room 308

3:45pm–5:30pm

Session Chair: Sohel Anwar, Indiana University-PurdueUniversity Indianapolis, Carmel, IN, United States

3:45pm – Sommerfeld Effect and Passive EnergyReallocation in a Self-Synchronizing SystemTechnical Paper Publication. IMECE2018-87559Anubhab Sinha, Saurabh Kumar Bharti, Arun KumarSamantaray, Ranjan Bhattacharyya, Indian Institute ofTechnology Kharagpur


69

4:06pm – Finite Element Analysis (FEA) for Optimization theDesign of a Baja SAE ChassisTechnical Paper Publication. IMECE2018-87564Jessica Gissella Maradey Lazaro, Helio Sneyder EstebanVillegas, Braulio José Blanco Caballero, UniversidadAutonóma de Bucaramanga, Bucaramanga, Colombia

4:27pm – A Virtual Sensor for Soot Load Estimation inDiesel Particulate FiltersTechnical Paper Publication. IMECE2018-88094Pratik V. Magar, Afshin Izadian, Indiana University-PurdueUniversity Indianapolis, Indianapolis, IN, United States, Sohel Anwar, Indiana University-Purdue UniversityIndianapolis, Carmel, IN, United States

4:48pm – Analysis of Magneto Electro Elastic CircularPlates Based on DQ MethodTechnical Presentation. IMECE2018-88782Saeed Amir, University of Kashan, Kashan, Isfahan, Iran,Abbasn Loghman, Ehsan Arshid, Kashan University, Kashan,Iran, Ali Haghshenas, Louisiana State University, LouisianaState, LA, United States

5:09pm – An Efficient Layerwise Theory Based Facet ShellElement for Modeling of Composite and Sandwich ShellsWith Multiple Delaminations Using a Hybrid ContinuityMethodTechnical Presentation. IMECE2018-89558Adnan Ahmed, Santosh Kapuria, Indian Institute ofTechnology Delhi, New Delhi, India

6-4 DESIGN AND CONTROL OF ROBOTS,MECHANISMS AND STRUCTURES6-4-3 Robot Design IThird Floor, David L. Lawrence Convention Center, Room 307

3:45pm–5:30pm

Session Chair: Vivek Sangwan, Indian Institute of TechnologyBombay, Mumbai, India

Session Co-Chair: Kiwon Sohn, University of Hartford, WestHartford, CT, United States

3:45pm – Development of Lower Body for Vehicle DrivingRobot, HARTTechnical Paper Publication. IMECE2018-86470Kiwon Sohn, Mark Markiewicz, Stefan Keilich, University ofHartford, West Hartford, CT, United States

4:06pm – An Accurate On-Line Correction Strategy forGravity Compensation Aiming at Teaching by Touch ofCollaborative RobotsTechnical Paper Publication. IMECE2018-86649Yunfei Dong, Tianyu Ren, Dan Wu, Ken Chen, TsinghuaUniversity, Beijing, Beijing, China

4:27pm – Optimal Mechatronic Design of a QuadrupedRobot With Compliant LegsTechnical Paper Publication. IMECE2018-88055Jaime Arcos-Legarda, Khunsa Hisham, Indiana University-Purdue University Indianapolis, Indianapolis, IN, United States,Sohel Anwar, Indiana University-Purdue UniversityIndianapolis, Carmel, IN, United States, Andres Tovar, IndianaUniversity-Purdue University Indianapolis, Indianapolis, IN,United States

4:48pm – Paper-Based Robotic Systems With StackableInflatable ActuatorsTechnical Presentation. IMECE2018-89611Xiyue Zou, Michael Yang, Cora LoPresti, Rutgers, The StateUniversity of New Jersey, Piscataway, NJ, United States, Smit Shukla, Birla Institute of Technology, Mesra, India,Tongfen Liang, Rutgers, The State University of New Jersey,Piscataway, NJ, United States, Meriem Akin, BraunschweigUniversity of Technology, Braunschweig, Germany,Aaron Mazzeo, Rutgers, The State University of New Jersey,Piscataway, NJ, United States

5:09pm – Study of Symmetric Solutions of anUnderactuated Bipedal RobotTechnical Paper Publication. IMECE2018-87723Prachi Shah, Vivek Sangwan, Indian Institute of TechnologyBombay, Mumbai, Maharashtra, India

6-8 SMART STRUCTURES ANDSTRUCTRONIC SYSTEMS: SENSING,ENERGY GENERATION AND CONTROL6-8-2 Energy Harvesting and TransducersThird Floor, David L. Lawrence Convention Center, Room 309

3:45pm–5:30pm

Session Chair: Hornsen (HS) Tzou, Nanjing University ofAeronautics and Astronautics, Nanjing, Jiangsu, China

3:45pm – Multi-Stable Magnetic Spring-Based EnergyHarvester Subject to Harmonic Excitation: ComparativeStudy and Experimental EvaluationTechnical Paper Publication. IMECE2018-86157Hieu Nguyen, Hamzeh Bardaweel, Louisiana Tech University,Ruston, LA, United States

4:06pm – Study on Motor-Driven Gyroscopic Generator:Part 1 — Characteristics at Constant VelocityTechnical Paper Publication. IMECE2018-86390Hiroshi Hosaka, Yoshinori Oonishi, Yuki Tajima, University ofTokyo, Kashiwa-City, Chiba, Japan, Akira Yamashita, SeigiKanagata Co., Ltd., Shiroi-City, Chiba Prefecture, Japan

4:27pm – Study on Motor-Driven Gyroscopic Generator:Part 2 — Self-Acceleration by Power FeedbackTechnical Paper Publication. IMECE2018-86444Yuki Tajima, Yoshinori Oonishi, Hiroshi Hosaka, University ofTokyo, Kashiwa-City, Chiba, Japan


70

4:48pm – Energy Partition of Coupled and High FrequencyVibrations of Quartz Crystal PlatesTechnical Presentation. IMECE2018-88333Qi Huang, Rongxing Wu, Longtao Xie, Ningbo University,Ningbo, Zhejiang, China, Guoliang Huang, University ofMissouri, Columbia, MO, United States, Jianke Du, Ji Wang,Ningbo University, Ningbo, Zhejiang, China

5:09pm – Control-Based Power Amplification inThermoacoustic-Piezoelectric Energy Harvesting DevicesTechnical Presentation. IMECE2018-88125Jesse Callanan, Mostafa Nouh, University at Buffalo, StateUniversity of New York, Buffalo, NY, United States

6-9 NOVEL CONTROL OF DYNAMICSYSTEM AND6-9-2 Novel Control of Dynamic System IIThird Floor, David L. Lawrence Convention Center, Room 310

3:45pm–5:30pm

Session Chair: C. Steve Suh, Texas A&M University, CollegeStation, TX, United States

3:45pm – Periodic Motions in a First-Order, Time-Delayed,Nonlinear SystemTechnical Paper Publication. IMECE2018-86824Siyuan Xing, Albert Luo, Southern Illinois UniversityEdwardsville, Edwardsville, IL, United States

4:06pm – Periodic Motions in a Van Der Pol OscillatorTechnical Paper Publication. IMECE2018-86842Yeyin Xu, Albert Luo, Southern Illinois University Edwardsville,Edwardsville, IL, United States

4:27pm – Period Motions and Stability in a Nonlinear SpringPendulumTechnical Paper Publication. IMECE2018-86862Albert Luo, Yaoguang Yuan, Southern Illinois UniversityEdwardsville, Edwardsville, IL, United States

4:48pm – On the Temporal Network Analysis With LinkPredictionTechnical Paper Publication. IMECE2018-88101Bin Wu, C. Steve Suh, Texas A&M University, College Station,TX, United States

5:09pm – Low Cost Robotic Arm Manipulator ControllerWith Single Stage Fluid ValvesTechnical Paper Publication. IMECE2018-88435Claudio Campana, Akin Tatoglu, University of Hartford, WestHartford, CT, United States

6-11 VIBRATIONS OF CONTINUOUSSYSTEMS6-11-2 Vibrations of Continuous Systems IIThird Floor, David L. Lawrence Convention Center, Room 311

3:45pm–5:30pm

Session Chair: Ibrahim F. Gebrel, University of WesternOntario, London, ON, Canada

Session Co-ChairS: Aman Kumar, Indian Institute ofTechnology Kharagpur, Khargapur, India, Mustapha Fofana,Worcester Polytechnic Institute, Worcester, MA, United States

3:45pm – Dynamic Analysis and Design of a Novel Ring-Based Vibratory Energy HarvesterTechnical Paper Publication. IMECE2018-87164Ibrahim F. Gebrel, University of Western Ontario, London, ON,Canada, Ligang Wang, Harbin Engineering University, Harbin,Heilongjiang, China, Samuel Asokanthan, University ofWestern Ontario, London, ON, Canada

4:06pm – Modal Identification and Nonlinear Vibration ofFlexible Manipulator With Revolute Pair IncorporatingGeneric PayloadTechnical Paper Publication. IMECE2018-88527Pravesh Kumar, Barun Pratiher, Indian Institute of TechnologyJodhpur, Jodhpur, Rajasthan, India

4:27pm – Evaluation of Vibration Performance of OverheadLine Conductor and Insulator String for 800 KV HVDCSystemTechnical Presentation. IMECE2018-86105Gnanavel B.K., Saveetha Engineering College, Chennai,Tamilnadu, India, Anantha Babu M.D., Vibration LaboratoryMechanical Engineering Division, Bangalore, Karnataka, India,Raja Rajeswari N., Lakshmanan Singaram, SaveethaEngineering College, Chennai, Tamailnadu, India, Kamesh K.,Murugappa Polytechnic College, Chennai, Tamilnadu, India

4:48pm – Generation of Traveling Waves in Beams UsingSearch Based OptimizationTechnical Presentation. IMECE2018-88719Aman Kumar, Anirvan Dasgupta, Indian Institute ofTechnology Kharagpur, Khargapur, India

5:09pm – Impact Vibration Analysis of a Continuous SystemColliding With Elastic Bodies at an Arbitrary PositionTechnical Presentation. IMECE2018-88742Yuji Suzuki, Tatsuhito Aihara, Hosei University, Tokyo, Tokyo,Japan


71


6-1 PLENARY PRESENTATIONS6-1-1 Dynamics, Vibration, and Control PlenaryThird Floor, David L. Lawrence Convention Center, Room 303

8:00am–8:45am

8:00am – Complex Modal Decomposition for TravelingWaves and Nonsynchronous OscillationsPlenary Presentation. IMECE2018-90097Brian Feeny, Michigan State University, East Lansing, MI,United States

6-4 DESIGN AND CONTROL OF ROBOTS,MECHANISMS, AND STRUCTURES6-4-4 Robot Design IIThird Floor, David L. Lawrence Convention Center, Room 307

10:00am–11:45am

Session Chair: He Shen, California State University,Los Angeles, Los Angeles, CA, United States

Session Co-Chair: Kiwon Sohn, University of Hartford, West Hartford, CT, United States

10:00am – Service Robot Design for Uses in HumanCentered EnvironmentsTechnical Paper Publication. IMECE2018-86479Kiwon Sohn, Ethan Morris, Obioma Ulebor, Thomas Currier,Shaun Merrill, University of Hartford, West Hartford, CT,United States

10:21am – Motion Planning for Handspring Maneuver Usinga Two Link RobotTechnical Paper Publication. IMECE2018-87809Raunaq Bhirangi, Vivek Sangwan, Indian Institute ofTechnology Bombay, Mumbai, Maharashtra, India

10:42am – Low Cost Optical Mechanical System for HumanRobot InteractionTechnical Paper Publication. IMECE2018-87885Yulai Weng, Andrew Specian, Mark Yim, University ofPennsylvania, Philadelphia, PA, United States

11:03am – Enhancing the Path Planning Generation of aFive DOF Manipulator Using Low-Cost Camera-LaserTriangulation TechniqueTechnical Paper Publication. IMECE2018-88144Ahmed Y. AbdelHamid, Military Technical College, Cairo,Egypt, Maged M. Abou Elyazed, Technical Research Center,Cairo, Egypt, Mohamed H. Mabrouk, Mootaz E. Abo Elnor,Military Technical College, Cairo, Egypt

11:24am – Development and Analysis of Robotic Arms forHumanoid MeloTechnical Paper Publication. IMECE2018-87987He Shen, California State University, Los Angeles, LosAngeles, CA, United States, Salvador Rojas, California StateUniversity, Los Angeles, Whittier, CA, United States, EduardoMolina, Francisco Moxo Galicia, Ni Li, California StateUniversity, Los Angeles, Los Angeles, CA, United States

6-5 FLUID-STRUCTURE INTERACTION6-5-1 Fluid-Structure Interaction IThird Floor, David L. Lawrence Convention Center, Room 310

10:00am–11:45am

Session Chair: Marco Amabili, McGill University, Montreal,QC, Canada

10:00am – Developing an Advance Tire Hydroplaning ModelUsing Co-Simulation of Fully Coupled FEM and CFD Codesto Estimate Cornering ForceTechnical Paper Publication. IMECE2018-86581Ashkan Nazari, Virginia Tech, Blacksburg, VA, United States,Lu Chen, Francine Battaglia, University at Buffalo, StateUniversity of New York, Buffalo, NY, United States, SaiedTaheri, Virginia Tech, Blacksburg, VA, United States

10:21am – Experimental and CFD Investigation ofAerodynamic Forces and Moments in a Linear TurbineBlade CascadeTechnical Paper Publication. IMECE2018-86667Vaclav Slama, Doosan Skoda Power, Pilsen, Czech Republic,Jiri Ira, NUM Solution s.r.o., Prague, Czech Republic,Petr Eret, University of West Bohemia, Pilsen, Czech Republic,Bartolomej Rudas, Doosan Skoda Power, Pilsen, CzechRepublic, Ales Macalka, NUM Solution, Prague, CzechRepublic, Volodymyr Tsymbalyuk, University of WestBohemia, Pilsen, Czech Republic

10:42am – Effect of Speed on the PerformanceCharacteristics of Non-Recessed Worn Hybrid ConicalJournal Bearing for Different Semi Cone AnglesTechnical Paper Publication. IMECE2018-87734Sanjay Pawar, Vikas Phalle, Sangram Patil, Veermata Jijabai Technologicacl Institute, Mumbai, Maharashtra, India

11:03am – Experiments on Nonlinear Vibrations of aNuclear Fuel Rod in Air and in WaterTechnical Presentation. IMECE2018-88755Marco Amabili, Prabakaran Balasubramanian, Giovanni Ferrari, McGill University, Montreal, QC, Canada,Kostas Karazis, Framatome, Lychburg, VA, United States,Brian Painter, Framatome Ltd., Lychburg, VA, United States

11:24am – A Numerical Study of VIV Suppression Using aRotative Non-Linear Vibration Absorber (NVA) and a Wake-Oscillator ModelTechnical Presentation. IMECE2018-88767Tatiana Ueno, University of São Paulo, Lins, São Paulo, Brazil,Guilherme Franzini, University of São Paulo, São Paulo, SãoPaulo, Brazil

TRACK 6 DYNAMICS, VIBRATION, AND CONTROL – TUESDAY, NOVEMBER 13

72

6-6 VIBRATION, NOISE CONTROL ANDDAMPING TECHNOLOGIES6-6-1 Vibration, Noise Control and DampingTechnologies IThird Floor, David L. Lawrence Convention Center, Room 308

10:00am–11:45am

Session Chair: Robley G. Kirk, Virginia Tech, Christiansburg,VA, United States

10:00am – Maxwell-Voigt and Voigt Models for VibrationIsolation: Influence of Fractional Damping and Time DelayTechnical Paper Publication. IMECE2018-86089Sudhir Kaul, Western Carolina University, Cullowhee, NC,United States

10:21am – A Vertical Seismometer With Build-inRetroreflector for Absolute GravimetryTechnical Paper Publication. IMECE2018-86136Meiying Guo, Kang Wu, Jiamin Yao, Jin Qian, Lijun Wang,Tsinghua University, Beijing, China

10:42am – Improved Design Tool for Thermal SynchronousInstabilityTechnical Paper Publication. IMECE2018-86142Robley G. Kirk, Virginia Tech, Christiansburg, VA, UnitedStates, Wen Jeng Chen, Eigen Technologies, Inc., Davidson,NC, United States

11:03am – An Energy-Regenerative Suspension SystemTechnical Paper Publication. IMECE2018-86143Thomas Lato, University of Ontario Institute of Technology,Oshawa, ON, Canada, Huiyong Zhao, Hubei University ofAutomotive Technology, Shiyan, Hubei Province, China,Lin Zhao, Yuping He, University of Ontario Institute ofTechnology, Oshawa, ON, Canada

11:24am – Energy Absorption Mechanisms and CrashAnalysis of Helicopter SeatsTechnical Paper Publication. IMECE2018-86220Gulce Ozturk, Turkish Aerospace Industries, Ankara, Ankara,Turkey, Altan Kayran, METU Center for Wind Energy, Ankara,Turkey

6-7 DYNAMICS AND CONTROL INMICRO/NANO ENGINEERING6-7-1 Dynamics and Control in Micro/NanoEngineering IThird Floor, David L. Lawrence Convention Center, Room 309

10:00am–11:45am

Session Chair: Dumitru Caruntu, University of Texas Rio Grande Valley, Edinburg, TX, United States

Session Co-Chairs: Marco Amabili, McGill University,Montreal, QC, Canada, Saad Ilyas, King Abdullah University of Science & Tech, Thuwal, Saudi Arabia

10:00am – Bouncing Dynamics of Cantilever-Type NEMSwitches Considering Tip-Substrate ContactTechnical Paper Publication. IMECE2018-87124Mohamed Bognash, Samuel Asokanthan, University ofWestern Ontario, London, ON, Canada

10:21am – Evaluation of Tribological Properties ofGraphene Oxide Dispersed Liquid Paraffin OilTechnical Paper Publication. IMECE2018-87346Bhavyanidhi Vats, Monika Singh, Moradabad Institute ofTechnology, Moradabad, India, Anuj Gupta, Gautam BudddhaUniversity, Delhi, Delhi, India

10:42am – Frequency Response for MEMS Circular PlateResonators Under Superharmonic Resonance of theSecond OrderTechnical Paper Publication. IMECE2018-87823Martin Botello, Julio Beatriz, Dumitru Caruntu, University of Texas Rio Grande Valley, Edinburg, TX, United States

11:03am – Investigating Simulteneous Excitation of Primaryand Subharmonic Resonance on a Doubly Clamped MemsMicrobeamTechnical Presentation. IMECE2018-88976Saad Ilyas, Feras Alfosail, Mohammad Younis, KingAbdullah University of Science & Tech, Thuwal, Saudi Arabia

11:24am – Analytical Study of Vibratory Transport UnderSpatially Asymmetric MotionTechnical Presentation. IMECE2018-88707Jyayasi Nath, Anirvan Dasgupta, Indian Institute ofTechnology Kharagpur, Khargapur, India


73

6-10 MULTIBODY DYNAMIC SYSTEMS ANDAPPLICATIONS6-10-1 Multibody Dynamic Systems andApplications IThird Floor, David L. Lawrence Convention Center, Room 306

10:00am–11:45am


10:00am – A New Approach for Locating the InstantaneousCenters of Zero Velocity for 1-DOF Planar LinkagesTechnical Paper Publication. IMECE2018-86341Nadim Diab, Rafik Hariri University, Mount Lebanon, Lebanon

10:21am – Identification of Vehicle Inertia Parameters:From Test Bench Design to Movement TrajectoryOptimizationTechnical Paper Publication. IMECE2018-87545Di Yao, Kay Büttner, Günther Prokop, Dresden University ofTechnology, Dresden, Germany

10:42am – Vibration Suppression in Two-DimensionalOscillation Dynamical SystemsTechnical Paper Publication. IMECE2018-87858Adnan S. Saeed, Mohammad Al-Shudeifat, KhalifaUniversity, Abu Dhabi, Abu Dhabi, United Arab Emir.

11:03am – Multibody Dynamics Approaches for Study onGood and Bad Whole-Body VibrationsTechnical Paper Publication. IMECE2018-88485Shanzhong (Shawn) Duan, Saint Martin’s University, Lacey,WA, United States

11:24am – Real-Time Simulation of Flexible MultibodyModels in Real-TimeTechnical Presentation. IMECE2018-89504William Prescott, Siemens Product Lifecycle Management,Coralville, IA, United States

6-3 NONLINEAR DYNAMICS, CONTROL,AND STOCHASTIC MECHANICS6-3-1 Nonlinear Dynamics, Control, and StochasticMechanics IThird Floor, David L. Lawrence Convention Center, Room 309

1:45pm–3:30pm


Session Co-ChairS: Marco Amabili, McGill University,Montreal, QC, Canada, Bogdan Epureanu, University ofMichigan, Ann Arbor, MI, United States

1:45pm – Design and Development of an UnmannedUnderwater Vehicle (UUV) in the Form of a CuttlefishTechnical Paper Publication. IMECE2018-86530Susheelkumar Cherangara Subramanian, Thao Le, JasonOlson, Sandesh G. Bhat, Sangram Redkar, Arizona StateUniversity, Mesa, AZ, United States

2:06pm – Modal Damping and Frequency Variations inNonlinearly Coupled Oscillators With Negative LinearStiffness ComponentsTechnical Paper Publication. IMECE2018-87474Fatima Alhammadi, Mohammad Al-Shudeifat, KhalifaUniversity of Science and Technology, Abu Dhabi, Abu Dhabi,United Arab Emir.

2:27pm – Nonlinear Damping in Nonlinear VibrationsTechnical Presentation. IMECE2018-87718Marco Amabili, McGill University, Montreal, QC, Canada

2:48pm – Voltage Response of Circular Plate MEMSResonators Under Superharmonic ResonanceTechnical Paper Publication. IMECE2018-87766Martin Botello, Julio Beatriz, Dumitru Caruntu, University ofTexas Rio Grande Valley, Edinburg, TX, United States

3:09pm – Dynamic Model and Control Design for aNonlinear Hydraulic ActuatorTechnical Paper Publication. IMECE2018-88320Carlos Borrás Pinilla, José L. Sarmiento, Juan F. Ortíz,Universidad Industrial de Santander, Bucaramanga, Colombia

6-4 DESIGN AND CONTROL OF ROBOTS,MECHANISMS AND STRUCTURES6-4-5 Mechanism Design IThird Floor, David L. Lawrence Convention Center, Room 307

1:45pm–3:30pm

Session Chair: Yin-ping Chang, Oakland University, Rochester,MI, United States

Session Co-Chair: Sebastian Roa Prada, UniversidadAutonoma de Bucaramanga, Bucaramanga, Santander,Colombia

1:45pm – Improving Motion Stability of the Plane 3-RPRParallel Manipulator at Singular ConfigurationTechnical Paper Publication. IMECE2018-86218Yu-Tong Li, Yuxin Wang, China University of Petroleum,Huadong, Qingdao, Shandong, China

2:06pm – Computational Design of a Bird-Inspired PerchingLanding Gear MechanismTechnical Paper Publication. IMECE2018-86615Paul Nadan, Christopher Lee, Frankln W. Olin College ofEngineering, Needham, MA, United States

2:27pm – Motion Capture of the Selective Hand PickingMovements as the Basis for the Design of MechanicallyAssisted Picking Tools in Coffee Plantations in ColombiaTechnical Paper Publication. IMECE2018-88428Jeyson Andres Hernandez Barbosa, Sebastian Roa Prada,Dario J. Hernandez Bolivar, Brajan Nicolas Ruiz Romero,Oscar E. Rueda, Universidad Autonoma de Bucaramanga,Bucaramanga, Santander, Colombia


74

2:48pm – Design and Construct a Portable, Low Cost,Ankle Foot Rehabilitation DeviceTechnical Presentation. IMECE2018-89433Ahmad Alshorman, Jordan University of Science andTechnology, Irbid, Jordan

3:09pm – The Virtual Cam: Hexagon Method Authenticationon Locating Key Instant Centers of All Planar Single Degreeof Freedom Kinematically Indeterminate Linkages up toTen-BarTechnical Paper Publication. IMECE2018-87802Zhengqi Liu, FCA, Rochester, MI, United States, Yin-pingChang, Oakland University, Rochester, MI, United States

6-5 FLUID-STRUCTURE INTERACTION6-5-2 Fluid-Structure Interaction IIThird Floor, David L. Lawrence Convention Center, Room 310

1:45pm–3:30pm


1:45pm – Aerodynamics Analysis for Optimization theDesign of a Baja SAE ChassisTechnical Paper Publication. IMECE2018-88027Jessica Gissella Maradey Lazaro, Sergio Andrés ArdilaGómez, Helio Sneyder Esteban Villegas, UniversidadAutonóma de Bucaramanga, Bucaramanga, Colombia

2:06pm – Active Control of a Two-Dimensional NonlinearWing Encountering a GustTechnical Paper Publication. IMECE2018-88456Xiaoyang Zhang, Mojtaba Kheiri, Wen-Fang Xie, ConcordiaUniversity, Montreal, QC, Canada

2:27pm – Investigation of Temperature Effect on CrackedPressurized PipesTechnical Paper Publication. IMECE2018-88572Karim Egab, University of Mazaya, Nassiriyah, Nassiriyah,Iraq, Saad Oudah, Yeasin Bhuiyan, University of SouthCarolina, Columbia, SC, United States, Ameen Nassar,University of Basrah, Basrah, Iraq, H.R. Hassan, MazayaUniversity, Thiqar, Iraq

2:48pm – 2 DOF Vortex-Induced Vibration Response andEnergy Harvesting of Slender Marine StructuresTechnical Presentation. IMECE2018-89060Jing Xu, Menglan Duan, Yingying Wang, China University ofPetroleum (Beijing), Beijing, China

3:09pm – Research Efforts on Aeroelasticity Effects inAirborne Diesel Engine TurbochargersTechnical Presentation. IMECE2018-89589Ryan C. McGowan, Muthuvel Murugan, Michael T.Szedlmayer, Kenneth S. Kim, Kurt M. Kruger, David J.Gondol, Chol-Bum M. Kweon, U.S. Army ResearchLaboratory, Aberdeen Proving Ground, MD, United States,Peter J. Clerkin, Environmental Research Group, AberdeenProving Ground, MD, United States, Rik D. Meininger, ScienceApplications International Corporation, Redstone Arsenal, AL,United States, Joseph A. Gibson, Khanh Q. Dang,Christopher A. Lindsey, Bernard N. Acker, U.S. ArmyAviation and Missile Research, Development, and EngineeringCenter, Redstone Arsenal, AL, United States, Marshall R.Musser, Sigmatech, Inc., Huntsville, AL, United States

6-6 VIBRATION, NOISE CONTROL ANDDAMPING TECHNOLOGIES6-6-2 Vibration, Noise Control and DampingTechnologies IIThird Floor, David L. Lawrence Convention Center, Room 308

1:45pm–3:30pm

Session Chair: Akintoye O. Oyelade, University of Lagos,Lagos, Nigeria

1:45pm – Energy Harvesting From a Vehicle Damper byUsing Electromagnetic TransducersTechnical Paper Publication. IMECE2018-86774Longhan Xie, Jiehong Li, South China University ofTechnology, Guangzhou, China

2:06pm – Rigid-Flexible Coupling Dynamic Modeling andSimulation of Ravigneaux Compound Planetary GearSystemsTechnical Paper Publication. IMECE2018-86787Yigong Lv, Yanfang Liu, Junbin Lai, Peng Dong, BeihangUniversity, Beijing, China

2:27pm – Frequency Domain Non-Linear Modeling andAnalysis of Liquid Filled Column DampersTechnical Paper Publication. IMECE2018-86850H. Sefa Kizilay, Ender Cigeroglu, Middle East TechnicalUniversity, Ankara, Turkey

2:48pm – Vibration Prediction of Horizontal Axis WashingMachine Through FEA on Wooden and Concrete FloorTechnical Paper Publication. IMECE2018-87001Sachin Nilawar, Vasudeo Patil, Sushilkumar Vishwakarma,Whirlpool of India Ltd., Pune, Maharashtra, India

3:09pm – Numerical and Analytical Analyses of Bi-StableElement as Negative StiffnessTechnical Paper Publication. IMECE2018-87175Akintoye O. Oyelade, University of Lagos, Lagos, Nigeria


75

6-10 MULTIBODY DYNAMIC SYSTEMS ANDAPPLICATIONS6-10-2 Multibody Dynamic Systems andApplications IIThird Floor, David L. Lawrence Convention Center, Room 306

1:45pm–3:30pm

Session Chair: Shanzhong (shawn) Duan, Saint Martin’sUniversity, Lacey, WA, United States

1:45pm – Modeling Stablization of Crane and Ship byGyroscopic Control Using the Moving Frame MethodTechnical Paper Publication. IMECE2018-86165Josef Flatlandsmo, Torbjoern Smith, Ørjan OmmedalHalvorsen, Western Norway University of Applied Sciences,Bergen, Norway, Johnny Vinje, Western Norway University ofApplied Sciences, Flora, Sogn og Fjorande, Norway, ThomasImpelluso, Western Norway University of Applied Sciences,Bergen, Norway

2:06pm – Modeling Crane Induced Ship Motion Using theMoving Frame MethodTechnical Paper Publication. IMECE2018-86190Øystein Haveland, Paulo Alexander Jacobsen Jardim, JanTore Rein, Thomas Impelluso, Western Norway University ofApplied Sciences, Bergen, Norway

2:27pm – Dynamic Comparison of a 3-Degrees-of-FreedomParallel Manipulator With Multiple Dry Clearance Jointsand With Lubricated JointsTechnical Paper Publication. IMECE2018-87016Haodong Zhang, Xianmin Zhang, Xuchong Zhang, ZhenhuiZhan, South China University of Technology, Guangzhou,China

2:48pm – A Variational Derivation of Equations of MotionWith Contact Constraints Using SE(3)Technical Paper Publication. IMECE2018-87126Hidenori Murakami, University of California, San Diego, SanDiego, CA, United States, Takeyuki Ono, The National DefenseAcademy, Yokosuka, Japan

3:09pm – Development of Equations of Motion for aStewart Platform Under Prescribed Mount MotionTechnical Paper Publication. IMECE2018-87253Takeyuki Ono, Ryosuke Eto, Junya Yamakawa, The NationalDefense Academy, Yokosuka, Japan, Hidenori Murakami,University of California, San Diego, San Diego, CA, UnitedStates

6-3 NONLINEAR DYNAMICS, CONTROL,AND STOCHASTIC MECHANICS6-3-2 Nonlinear Dynamics, Control, and StochasticMechanics IIThird Floor, David L. Lawrence Convention Center, Room 309

3:45pm–5:30pm


Session Co-Chairs: Bogdan Epureanu, University of Michigan,Ann Arbor, MI, United States, Isaac Elishakoff, Florida AtlanticUniversity, Boca Raton, FL, United States

3:45pm – A Time-Frequency Domain Adaptive ControlApproach for Vibration of Active Magnetic Bearing SystemTechnical Paper Publication. IMECE2018-86110Xuan Yao, Zhaobo Chen, Harbin Institute of Technology,Harbin, Heilongjiang, China, Xiaoxiang Liu, Beijing Institute ofControl Engineering, Beijing, China, Yinghou Jiao, HarbinInstitute of Technology, Harbin, Heilongjiang, China

4:06pm – Optimal Vibration Control and Energy ScavengingUsing Collocated Nonlinear Energy Sinks and PiezoelectricElementsTechnical Paper Publication. IMECE2018-86299Zahra Nili Ahmadabadi, Dana Incorporated, Maumee, OH,United States, Siamak Esmaeilzadeh Khadem, TarbiatModares University, Tehran, Tehran, Iran

4:27pm – Control Analysis of a 3D Self-Balancing InvertedPendulum and Cart System for Stability in the Event of aSensor FailureTechnical Paper Publication. IMECE2018-87586Sarah Lamb, Stanley Black & Decker, Inc., New Britain, CT,United States, Patricia Mellodge, Kiwon Sohn, Akin Tatoglu,University of Hartford, West Hartford, CT, United States

4:48pm – Multidimensional Integration Methods Used forCatastrophic Event Prediction Associated With NonlinearDynamic Responses of Road VehiclesTechnical Paper Publication. IMECE2018-88009Jesus Gonzalez Anaya, Julian Dunne, University of Sussex,Brighton, United Kingdom

5:09pm – Rigorous Implementation of the Galerkin Mechodfor Stepped ColumnsTechnical Presentation. IMECE2018-87779Isaac Elishakoff, Florida Atlantic University, Boca Raton, FL,United States, Damien Boutur, Sigma Clermont, Aubiere,France


76

6-4 DESIGN AND CONTROL OF ROBOTS,MECHANISMS AND STRUCTURES6-4-6 Mechanism Design IIThird Floor, David L. Lawrence Convention Center, Room 307

3:45pm–5:30pm

Session Chair: Hong Zhou, Texas A&M University-Kingsville,Kingsville, TX, United States

Session Co-Chair: Naoufel Azouz, University of Evry, Evry-Courcouronnes, France

3:45pm – Modeling Subsea ROV Motion Using the MovingFrame MethodTechnical Paper Publication. IMECE2018-86191Katrine Oen Austefjord, Linn-Kristin Skeide Larsen, WesternNorway University of Applied Sciences, Bergen, Hordaland,Norway, Martin Hestvik, Høgskolen på Vestlandet,Kristiansund, MORE OG ROMSDAL, Norway, ThomasImpelluso, Western Norway University of Applied Sciences,Bergen, Norway

4:06pm – Modelling and Design of an Airship CraneTechnical Paper Publication. IMECE2018-87587Naoufel Azouz, University of Evry, Evry-Courcouronnes,France, Mahmoud Khamlia, Fida Benabdallah, University ofEvry Paris-Saclay, Evry-Courcouronnes, France, FatmaGuesmi, Polytechnic School of Tunis, La Marsa, Tunisia

4:27pm – Path Generation Algorithm Verification of FiveDOF Robotic Arm With Linear Actuator Using MATLABSim-MechanicsTechnical Paper Publication. IMECE2018-88185Ahmed Y. AbdelHamid, Military Technical College, Cairo,Egypt, Maged M. Abou Elyazed, Technical Research Center,Cairo, Egypt, Abdelrahman Zaghloul, McMaster University,Hamilton, ON, Canada

4:48pm – Locomotion of Two-Mass Robot Using anImpulsive actuatorTechnical Presentation. IMECE2018-89432Ahmad Alshorman, Jordan University of Science andTechnology, Irbid, Jordan

5:09pm – Linkage Synthesis for Solar TrackingTechnical Paper Publication. IMECE2018-86471Kavan Jani, Hong Zhou, Chung Leung, Texas A&MUniversity-Kingsville, Kingsville, TX, United States

6-6 VIBRATION, NOISE CONTROL ANDDAMPING TECHNOLOGIES6-6-3 Vibration, Noise Control and DampingTechnologies IIIThird Floor, David L. Lawrence Convention Center, Room 308

3:45pm–5:30pm

Session Chair: Ashok Belegundu, Pennsylvania StateUniversity, University Park, PA, United States

3:45pm – Optimized Vibration Suppression of StructuralFloor Using Passive TMDTechnical Paper Publication. IMECE2018-87488Zaman Chini, Haifeng Zhang, University of North Texas,Denton, TX, United States

4:00pm – Vibration Analysis of Washing Machines inRotating Plane of DrumTechnical Paper Publication. IMECE2018-88632Cem Baykal, Ender Cigeroglu, Yigit Yazicioglu, Middle EastTechnical University, Ankara, Turkey

4:15pm – Optimal Design of a Segmented Tube With SideBranches for Noise ReductionTechnical Paper Publication. IMECE2018-88691Ashok Belegundu, Pennsylvania State University, UniversityPark, PA, United States, Michael Grissom, Soundless, LLC,State College, PA, United States

4:30pm – Quenching of Friction Induced Vibration byTangential Acceleration Feedback ControlTechnical Presentation. IMECE2018-88894Jyayasi Nath, IIT Kharagpur, Kharagpur, India, ShyamalChatterjee, IIEST SHIBPUR, Howrah, India

4:45pm – Theoretical Model for Vibration Reduction inHuman Body-Wheelchair SystemTechnical Presentation. IMECE2018-89523Akihiro Yamamoto, Shinichiro Ota, Okayama PrefecturalUniversity, Souja, Okayama, Japan

5:00pm – Dynamic Analysis Rectangular Aluminium PlateUnder Transverse Loading Using Finite DifferenceAlgorithmTechnical Paper Publication. IMECE2018-86198Michael Agarana, Covenant University., Ota, Ogun State,Nigeria, Esther Akinlabi, University of Johannesburg,Johannesburg, Gauteng Province, South Africa


77

6-10 MULTIBODY DYNAMIC SYSTEMS ANDAPPLICATIONS6-10-3 Multibody Dynamic Systems andApplications IIIThird Floor, David L. Lawrence Convention Center, Room 306

3:45pm–5:30pm


Session Co-Chair: Isaac Elishakoff, Florida Atlantic University,Boca Raton, FL, United States

3:45pm – Steering Strategy for a Multi-Axle WheeledVehiclesTechnical Paper Publication. IMECE2018-86323Waqar Ahmed, Sana Fatima, Raja Amer Azim, NationalUniversity of Sciences and Technology, Islamabad, Pakistan

4:06pm – Finite Element Analysis of Contact Force ModelsDuring Solid Elastic and Plastic Bodies ImpactTechnical Paper Publication. IMECE2018-87458Gustavo Rodrigues, Universidade Estácio de Sá, Rio deJaneiro, Brazil, Hans Weber, Pontifical Catholic University ofRio de Janeiro, Rio de Janeiro, RJ, Brazil, Larissa Driemeier,University of São Paulo, São Paulo, Brazil

4:27pm – Topology Optimization of an Anti Roll Bar of aHeavy Commercial Truck for Vehicle Dynamics andDurabilityTechnical Paper Publication. IMECE2018-87862Ece Yenilmez, Ali Yasar, Polat Sendur, Ozyegin University,Cekmekoy, Istanbul, Turkey

4:48pm – Design Optimization and Dynamic Analysis ofElliptical Cross-Section Helical SpringTechnical Presentation. IMECE2018-89537Majdi Gzal, Oleg Gendelman, Technion, Israel Institute ofTechnology, Haifa, Israel

5:09pm – Uncertainty Quantification of Edwards High-Pressure Pipe Behavior Using Complex SystemThermal-Hydraulics CodesTechnical Paper Publication. IMECE2018-88053Mojtaba Raheli Kaleibar, Sahand University of Technology,Tabriz, East Azarbaijan, Iran, Mohammad Pourgol-Mohammad, JCI/Sahand University of Technology, York, PA,United States, Rahim Khoshbakhti Saray, Sahand Universityof Technology, Tabriz, East Azarbaijan, Iran, Seyed MohsenHoseyni, KTH Royal Institute of Technology, Stokholm,Sweden

6-11 VIBRATIONS OF CONTINUOUSSYSTEMS6-11-1 Vibrations of Continuous Systems IThird Floor, David L. Lawrence Convention Center, Room 310

3:45pm–5:30pm


Session Co-Chairs: Marco Amabili, McGill University,Montreal, QC, Canada, Berkan Alanbay, Virginia Tech,Blacksburg, VA, United States

3:45pm – Vibration of Curvilinearly Stiffened Plates UsingRitz Method With Orthogonal Jacobi PolynomialsTechnical Paper Publication. IMECE2018-86871Berkan Alanbay, Karanpreet Singh, Rakesh Kapania,Virginia Tech, Blacksburg, VA, United States

4:06pm – Dynamic Analysis and Parametric Excitation of aMulti-Span Beam Structure Coupled With a Sequence ofMoving Rigid BodiesTechnical Paper Publication. IMECE2018-87181Hao Gao, Bingen (Ben) Yang, University of SouthernCalifornia, Los Angeles, CA, United States

4:27pm – Parametric Instability of Planetary GearTransmission Mounted on Discrete Support Struts WithMinimum Ring Gear Rim Thickness DesignTechnical Paper Publication. IMECE2018-87220Peng Guan, University of Tennessee, Dublin, OH, UnitedStates, Hans Desmidt, University of Tennessee, Knoxville, TN,United States

4:48pm – Parametric Resonance of ElectrostaticallyActuated MEMS Cantilever Resonators: HomotopyAnalysis Method Versus the Method of Multiple ScalesTechnical Paper Publication. IMECE2018-88015Dumitru Caruntu, Christopher Reyes, University of Texas Rio Grande Valley, Edinburg, TX, United States

5:09pm – A Simple Spring-Loaded Inverted Pendulum (Slip)Model of a Bio-Inspired Quadrupedal Robot OverCompliant TerrainsTechnical Paper Publication. IMECE2018-87134Hasti Hayati, Paul Walker, Terry Brown, Paul Kennedy,David Eager, University of Technology Sydney, Sydney, NSW,Australia


78

6-20 CONGRESS-WIDE SYMPOSIUM ONNDE & SHM: DYNAMICS, VIBRATION, ANDCONTROL FOR STRUCTURAL HEALTHMONITORING APPLICATIONS6-20-1 Dynamics, Vibration, and Control forStructural Health Monitoring Applications IThird Floor, David L. Lawrence Convention Center, Room 305

3:45pm–5:30pm

Session Chair: Andrei Zagrai, New Mexico Institute of Mining& Technology, Socorro, NM, United States

3:45pm – Interfacial Strength Evaluation of SurfaceCoatings by Using Repeated Pulsed Laser IrradiationsTechnical Presentation. IMECE2018-86494Takeshi Yamada, Yusaku Saito, Kohei Kanamori, Akio Yonezu, Chuo University, Tokyo, Japan

4:06pm – A Phase Spectrum Method for the Measurementof Liquid-Layer ThicknessTechnical Paper Publication. IMECE2018-87201Wenbin Huang, Quanchang Li, Junkai Ding, ChongqingUniversity, Chongqing, China

4:27pm – Negative Effective Stiffness Content in CrackedRotorsTechnical Paper Publication. IMECE2018-87470Mohammad Al-Shudeifat, Fatima Alhammadi, KhalifaUniversity of Science and Technology, Abu Dhabi, Abu Dhabi,United Arab Emir.

4:48pm – Electromechanical-Resonance-Based Self-Sensing in Metal-Cement StructuresTechnical Presentation. IMECE2018-88325Zhong Liang, Deborah D.L. Chung, University at Buffalo,State University of New York, Buffalo, NY, United States

5:09pm – Application of Electromechanical ImpedanceMethod to Structural Health Monitoring of CompositeElements of Aerospace StructuresTechnical Presentation. IMECE2018-89507Aaron Misla, Andrei Zagrai, New Mexico Institute of Mining &Technology, Socorro, NM, United States


79

NOTES

80

7-1-1: Curriculum Innovations, Pedagogy and Learning Methodologies – I

7-1-2; Curriculum Innovations, Pedagogy and Learning Methodologies – II

7-2-1: Globalization of Engineering

7-3-1: Engineering Accreditation, Data Collection, Assessment and ABET Session I

7-3-2: Engineering Accreditation, Data Collection, Assessment and ABETSession II

7-4-1: Systems Engineering and Sustainable Engineering Education – I

7-4-2: Systems Engineering and Sustainable Engineering Education – II

7-5-1: Applied Mechanics, Dynamic Systems and Control Engineering – I

7-5-2: Applied Mechanics, Dynamic Systems and Control Engineering – II

7-6-1: Fluid Mechanics, Heat Transfer, Experiments and Energy Systems

7-7-1: Problem Solving in Engineering Education, Research and Practice – I

7-7-2: Problem Solving in Engineering Education, Research and Practice – II

7-8-1: Distance/Online Engineering, Models and Enabling Technologies – I

7-8-2: Distance/Online Engineering, Models and Enabling Technologies – II

7-9-1: K-12 STEM, RET- University, School and Industry Alliance, Session in Honor of Late Professor Devdas Pai

7-10-1: Teaching Laboratories, Machine Shop Experiences and Technology-AidedLearning

7-12-1: Engineering Research Innovation

Track OrganizersSubha Kumpaty, Milwaukee School of

Engineering, United States Mohammad Naraghi, Manhattan College,

United States

Topic OrganizersAnabela Alves, University of Minho,

Portugal Amir Karimi, University of Texas-San

Antonio, United StatesHephzibah Kumpaty, University of

Wisconsin–Whitewater, United StatesNael Barakat, Texas A&M Kingsville,

United StatesMohammad Mahinfalah, Milwaukee

School of Engineering, United States

Wael Mokhtar, Grand Valley StateUniversity, United States

Zbigniew Bzymek, University ofConnecticut, United States

Reza Mirshams, University of NorthTexas, United States

Emine Celik Foust, York College ofPennsylvania, United States

Salim Azzouz, Midwestern StateUniversity, United States

Session OrganizersAnabela Alves, University of Minho,

PortugalSalim Azzouz, Midwestern State

University, United StatesCelina P. Leao, University of Minho,

Portugal

Subha Kumpaty, Milwaukee School ofEngineering, United States

Amir Karimi, University of Texas–SanAntonio, United States

Nael Barakat, Texas A&M Kingsville,United States

Emine Celik Foust, York College ofPennsylvania, United States

Mohammad Mahinfalah, MilwaukeeSchool of Engineering, United States

Wael Mokhtar, Grand Valley StateUniversity, United States

Mohammad Naraghi, Manhattan College,United States

Nazmul Islam, University of Texas Rio Grande Valley, United States

TRACK 7 ENGINEERING EDUCATIONWEDNESDAY, NOVEMBER 14

7-13 ENGINEERING EDUCATION PLENARY7-13-1 Engineering Education PlenaryThird Floor, David L. Lawrence Convention Center, Room 302

9:00am–9:45am

9:00am – Lessons and Perspectives on TransformationalEngineering Education: Past, Present, and FuturePlenary Presentation. IMECE2018-90098Harvey Borovetz, University of Pittsburgh, Pittsburgh, PA,United States

7-2 GLOBALIZATION OF ENGINEERING7-2-1 Globalization of EngineeringThird Floor, David L. Lawrence Convention Center, Room 317

10:00am–11:45am

Session Chair: Subha Kumpaty, Milwaukee School ofEngineering, Milwaukee, WI, United States

10:00am – Temperature and Heat Flux Data-Logger for Usein Tunnel Ovens: An International Partnered ProjectTechnical Paper Publication. IMECE2018-86076Alexander Watt, Jason Wichert, Justine Staniszewski,Nathaniel Nakles, Yvonne English, Mike Bright, Grove CityCollege, Grove City, PA, United States, Michel Havet, ONIRIS,Nantes, France, Erik Bardy, Mark Reuber, Grove City College,Grove City, PA, United States

10:21am – Study on Functionally Gradient Materials UnderInternational Research Experiences for UndergraduatesProgram: US–South Africa CollaborationTechnical Paper Publication. IMECE2018-86288Subha Kumpaty, Milwaukee School of Engineering,Milwaukee, WI, United States, Esther Akinlabi, University ofJohannesburg, Johannesburg, South Africa, Sisa Pityana,Council of Scientific and Industrial Research, Pretoria, SouthAfrica, Andrew Gray, Kevin Sivak, Milwaukee School ofEngineering, Milwaukee, WI, United States, Mutiu F. Erinosho,University of Johannesburg, Johannesburg, South Africa

10:42am – Curricular Structure for a MechanicalEngineering Undergrad Program Based on HumanCapabilities and Professional CompetencesTechnical Paper Publication. IMECE2018-88240Diego A. Flórez, Universidad Pontificia Bolivariana, Medellin,Colombia

11:03am – Motivational Tools for Engineering Students inPrivileged Developing Countries: Examples From UAETechnical Paper Publication. IMECE2018-88499Bashar El-Khasawneh, Khalifa University, Abu Dhabi, UnitedArab Emir.

11:24am – Gender Climate and Gender Experience inEngineering EducationTechnical Presentation. IMECE2018-86385Jan Fertig, Subha Kumpaty, Milwaukee School ofEngineering, Milwaukee, WI, United States

7-4 SYSTEMS ENGINEERING ANDSUSTAINABLE ENGINEERING EDUCATION7-4-1 Systems Engineering and SustainableEngineering Education – IThird Floor, David L. Lawrence Convention Center, Room 318

10:00am–11:45am

Session Chair: Nael Barakat, Texas A&M Kingsville, Kingsville,TX, United States

10:00am – Application of Systems Engineering to MachineDesign for Technology StudentsTechnical Paper Publication. IMECE2018-86713Anthony D. Angelo, U.S. Army ARDEC, Hillsborough, NJ,United States, Edwin K.P. Chong, Colorado State University,Ft. Collins, CO, United States

10:21am – Technology on Trial: The Social Framework ofSafe DesignTechnical Paper Publication. IMECE2018-87017W.P. Munsell, University of Oklahoma, Norman, OK, UnitedStates

10:42am – Assessing the Educational Effectiveness of aSystem Engineering Software in Capstone Design ProjectsTechnical Paper Publication. IMECE2018-87640Angran Xiao, New York City College of Technology, YorktownHeights, NY, United States, Gaffar Gailani, Shaojin Zhang,New York City College of Technology, Brooklyn, NY, UnitedStates

11:03am – Development of a New Course on Microgridsand Distributed Energy ResourcesTechnical Paper Publication. IMECE2018-88506Sasan Haghani, University of the District of Columbia,Washington, DC, United States

TRACK 7 ENGINEERING EDUCATION – WEDNESDAY, NOVEMBER 14

81

7-5 APPLIED MECHANICS, DYNAMICSYSTEMS AND CONTROL ENGINEERING7-5-1 Applied Mechanics, Dynamic Systems andControl Engineering – IThird Floor, David L. Lawrence Convention Center, Room 316

10:00am–11:45am

Session Chair: Mohammad Mahinfalah, Milwaukee School ofEngineering, Milwaukee, WI, United States

10:00am – Inspiring Learning: Assessment of Friction in aReal-World Model Using the Moving Frame Method inDynamicsTechnical Paper Publication. IMECE2018-86189Thorstein R. Rykkje, University of Bergen, Bergen, Hordaland,Norway, Erlend Bergaas, Western Norway University ofApplied Sciences, Bergen, Norway, Andreas Skjelde,Høgskolen på Vestlandet, Bergen, Hordaland, Norway, Daniel Leinebø, Thomas Impelluso, Western NorwayUniversity of Applied Sciences, Bergen, Norway

10:21am – Interactive Educational Testbed for Statics andMechanics of MaterialsTechnical Paper Publication. IMECE2018-87938Zhelong He, Qingchang Liu, Katherine Yang, Niemann Pest,Baoxing Xu, Jason Kerrigan, Marek-Jerzy Pindera,University of Virginia, Charlottesville, VA, United States

10:42am – Developing and Implementing a ProjectileLaunching Mechanism During a Senior EngineeringCapstone Project to Demonstrate Advanced ProjectileMotion PrinciplesTechnical Presentation. IMECE2018-87173Edward Bednarz III, Debbie A. French, Wilkes University,Wilkes-Barre, PA, United States

11:03am – Derivation of Rotation Matrix for Axis-AngleRepresentation of Rotation Based on an IntuitiveInterpretation of Rotation Matrix to Be Taught in RobotKinematics CoursesTechnical Presentation. IMECE2018-89645Roshan Kumar Hota, Kumar Cheruvu, Indian Institute ofTechnology Kharagpur, Kharagpur, India

7-1 CURRICULUM INNOVATIONS,PEDAGOGY, AND LEARNINGMETHODOLOGIES7-1-1 Curriculum Innovations, Pedagogy, andLearning Methodologies – IThird Floor, David L. Lawrence Convention Center, Room 317

1:45pm–3:30pm

Session Chair: Anabela Alves, University of Minho,Guimareves, Portugal

Session Co-Chair: Salim Azzouz, Midwestern State University,Wichita Falls, TX, United States

1:45pm – Traditional, Active, and Problem-Based LearningMethods Used to Improve an Undergraduate BiomechanicsCourseTechnical Paper Publication. IMECE2018-87478Sally Shady, Stevens Institute of Technology, Hoboken, NJ,United States

2:06pm – User Centered Design Applied to theImprovement of Fine Motor SkillsTechnical Paper Publication. IMECE2018-88407Carolina Castro Alarcon, Santiago Eduardo CastilloCadena, Daniel Haro Mendoza, National AutonomousUniversity of Mexico, Mexico City, Mexico, AlejandroRamirez-Reivich, National Autonomous University of Mexico,Distrito Federal, Mexico, Vicente Borja Ramírez, NationalAutonomous University of Mexico, Distrito Federal, Mexico,Arturo Treviño Arizmendi, National Autonomous University ofMexico, Periodista, Mexico, Jessica Daniela Vega Bello,National Autonomous University of Mexico, VenustianoCarranza, Mexico, Yesica Escalera Matamoros, NationalAutonomous University of Mexico, Coyoacan, Mexico

2:27pm – Integrating Collaborative Robots in Engineeringand Engineering Technology ProgramsTechnical Paper Publication. IMECE2018-88147Ana Djuric, Jeremy Rickli, Wayne State University, Detroit,MI, United States, John P. Sefcovic, Donald Hutchison,Michael M. Goldin, Oakland Community College, Auburn Hills,MI, United States

2:48pm – Understanding Mathematical Definitions ofCircularity/Roundness in ASME GD&T Y14.5 As Related toPart FunctionalityTechnical Paper Publication. IMECE2018-87148Chittaranjan Sahay, University of Hartford, Glastonbury, CT,United States, Suhash Ghosh, University of Hartford, WestHartford, CT, United States


82

7-4 SYSTEMS ENGINEERING ANDSUSTAINABLE ENGINEERING EDUCATION7-4-2 Systems Engineering and SustainableEngineering Education- IIThird Floor, David L. Lawrence Convention Center, Room 318

1:45pm–3:30pm

Session Chair: Emine Celik Foust, York College ofPennsylvania, York, PA, United States

1:45pm – Devices to Aid Mobility: Biomedical Engineering-Focused Undergraduate Senior Capstone Design ProjectsTechnical Paper Publication. IMECE2018-86826Lara Thompson, Jiajun Xu, Devdas Shetty, University of theDistrict of Columbia, Washington DC, United States

2:06pm – Measuring the Impact of a New MechanicalEngineering Sophomore Design Course on Students’Systems Thinking SkillsTechnical Paper Publication. IMECE2018-87624Cassandra Degen, Karim H. Muci-Kuchler, South DakotaSchool of Mines and Technology, Rapid City, SD, UnitedStates, Mark Bedillion, Carnegie Mellon University, Gibsonia,PA, United States, Shaobo Huang, South Dakota School of Mines and Technology, Rapid City, SD, United States, Marius D. Ellingsen, VRC Metal Systems, Rapid City, SD,United States

2:27pm – Student Learning Projects in Sustainable Energy:Solar-Powered Algae Culture, Photovoltaics, and CO2

CaptureTechnical Paper Publication. IMECE2018-88404Michael Mauk, Richard Chiou, Carlos Ruiz, Jean Espaillat,Senyu Wang, Ainhoa Garcia, Robert Surrette, DrexelUniversity, Philadelphia, PA, United States

2:48pm – Revolutionizing Mechanical EngineeringDepartmentsTechnical Presentation. IMECE2018-89725Yen-Lin Han, Seattle University, Seattle, WA, United States,Edward Berger, Elizabeth Briody, Purdue University, WestLafayette, IN, United States, Kathleen Cook, Greg Mason,Seattle University, Seattle, WA, United States, EdwardMorrison, Purdue University, West Lafayette, IN, United States,Teodora Shuman, Seattle University, Seattle, WA, UnitedStates, Jennifer Turns, University of Washington, Seattle, WA,United States, Elizabeth Wirtz, Purdue University, WestLafayette, IN, United States

7-5 APPLIED MECHANICS, DYNAMICSYSTEMS AND CONTROL ENGINEERING7-5-2 Applied Mechanics, Dynamic Systems andControl Engineering- IIThird Floor, David L. Lawrence Convention Center, Room 316

1:45pm–3:30pm

Session Chair: Mohammad Mahinfalah, Milwaukee School ofEngineering, Milwaukee, WI, United States

1:45pm – Rattlebacks for Undergraduate Engineers:Modelling Complex Behavior Using Introductory Dynamicsand Numerical MethodsTechnical Paper Publication. IMECE2018-86580Simon Jones, Kirby Kern, Rose-Hulman Institute ofTechnology, Terre Haute, IN, United States

2:06pm – Robotic Polishing of Free-Form Surfaces WithControlled Force and Effective Path PlanningTechnical Paper Publication. IMECE2018-87371Imran Mohsin, Kai He, Shenzhen Institutes of AdvancedTechnology, Chinese Academy of Sciences, Shenzhen, China,Ruxu Du, Chinese University of Hong Kong, Hong Kong, HongKong

2:27pm – A Consistent Approach to Problem Solving inMechanical VibrationsTechnical Paper Publication. IMECE2018-88241Amir Danesh Yazdi, Yi Wu, Oladipo Onipede, Penn StateUniversity Erie, Erie, PA, United States

2:48pm – A Material Model Fitting for RecycledPolyethylene Terephthalate Implemented in the FiniteElement ModelingTechnical Paper Publication. IMECE2018-88305Diego Fernando Mesa Vargas, Universidad de Guanajuato,Salamanca, Mexico, Agustin Vidal-Lesso, Universidad deGuanajuato-Dicis, Salamanca, Mexico, Jorge Arturo AlfaroAyala, Universidad de Guanajuato, Guanajuato, Guanajuato,Mexico


83

7-1 CURRICULUM INNOVATIONS,PEDAGOGY AND LEARNINGMETHODOLOGIES7-1-2 Curriculum Innovations, Pedagogy andLearning Methodologies – IIThird Floor, David L. Lawrence Convention Center, Room 317

3:45pm–5:30pm

Session Chair: Anabela Alves, University of Minho,Guimareves, Portugal

Session Co-Chair: Celina P. Leao, University of Minho,Guimaraes, Portugal

3:45pm – Dealing With the Students’ Profile Diversity in anIndustrial Engineering and Management Program: PBLversus Non-PBLTechnical Paper Publication. IMECE2018-86368Anabela Alves, Francisco Moreira, Celina P. Leao, Universityof Minho, Guimarães, Portugal

4:06pm – Blended Learning by Gamification in a Second-Year Introductory Engineering Design CourseTechnical Paper Publication. IMECE2018-86879Alyona Sharunova, Ahmed Ead, Christopher Robson, MishaAfaq, Pierre Mertiny, University of Alberta, Edmonton, AB,Canada

4:27pm – Effectiveness of Evidence-Based Active LearningPedagogies in Engineering Technology CoursesTechnical Paper Publication. IMECE2018-87656Mohsen Ayoobi, Mukasa Ssemakula, Ana Djuric, WayneState University, Detroit, MI, United States

4:48pm – A Reflection of a Pedagogic Approach in anEngineering CourseTechnical Paper Publication. IMECE2018-88538Manuel Eduardo Ferreira, University of Minho, Guimarães,Portugal, Joao Ferreira, Metrics, Guimarães, Portugal, Celina P. Leao, University of Minho, Guimarães, Portugal

5:09pm – Development of a Hybrid Heat and Mass TransferCourseTechnical Paper Publication. IMECE2018-87934Julie Mendez, Indiana University-Purdue University Columbus,Columbus, IN, United States

7-9 PRE-COLLEGE (K-12) STEM, RET—UNIVERSITY, SCHOOL AND INDUSTRYALLIANCE (IN HONOR OF LATEPROFESSOR DEVDAS PAI)7-9-1 K-12 STEM, RET—University, School andIndustry Alliance, Session in Honor of Late ProfessorDevdas PaiThird Floor, David L. Lawrence Convention Center, Room 318

3:45pm–5:30pm

Session Chair: Subha Kumpaty, Milwaukee School ofEngineering, Milwaukee, WI, United States

3:45pm – Development of a Multidisciplinary EngineeringResearch Program for Middle/High School TeachersTechnical Paper Publication. IMECE2018-86411Wen Li, Joshua Kim, Drew Kim, Michigan State University,East Lansing, MI, United States, Adam Alster, RenaissanceHigh School, Detriot, MI, United States, Marianne Livezey,Pontiac High School, Pontiac, MI, United States, TuyenDuddles, Macomb Math and Science, Warren, MI, UnitedStates

4:06pm – Collaborative Multidisciplinary EngineeringDesign Experiences in IoT (Internet of Things) for TeachersThrough Summer Research Site ProgramTechnical Paper Publication. IMECE2018-87491Hyoung Jin Cho, Alireza Karbalaei, Damla Turgut,Melissa Dagley, Eleazar Vasquez III, University of CentralFlorida, Orlando, FL, United States

4:27pm – Mechanical Engineering Student Developed LegoEngineering Design Learning Activity for 6th Grade ScienceStudentsTechnical Paper Publication. IMECE2018-87499Heather Lai, SUNY New Paltz, New Paltz, NY, United States,Laura Bryant, New Paltz Middle School, New Paltz, NY, UnitedStates

4:48pm – A Project-Based Learning Stem Program forMiddle and High School StudentsTechnical Paper Publication. IMECE2018-88647Mohamed Gharib, G. Benjamin Cieslinski, Jowaher Al-Marri, Brady Creel, Texas A&M University at Qatar, Doha,Qatar

5:09pm – Experiential Learning in STEM at the University ofthe District of Columbia (UDC) Through the Implementationof the First UDC Firebird Rover for the NASA HumanExploration Rover ChallengeTechnical Presentation. IMECE2018-88700Jiajun Xu, Sasan Haghani, University of the District ofColumbia, Washington, DC, United States


84

7-12 ENGINEERING RESEARCHINNOVATION AND RESEARCHEXPERIENCES FOR UNDERGRADUATES7-12-1 Engineering Research InnovationThird Floor, David L. Lawrence Convention Center, Room 316

3:45pm–5:30pm

Session Chair: Nazmul Islam, Univ of Texas Rio Grande Valley,Edinburg, TX, United States

3:45pm – Development and Testing of a Lab-Scale Air-GapMembrane Distillation Unit for Water DesalinationTechnical Paper Publication. IMECE2018-87088Reza Baghaei Lakeh, Keaton Cornell, Benny Ly, AaronChan, Cal Poly Pomona, Pomona, CA, United States, SepidehJankhah, Sterlitech Corp., Kent, WA, United States

4:06pm – Design of Instruments for Mechanical Testing of3D Printed PartsTechnical Presentation. IMECE2018-87115Serdar Tumkor, Jonathan Holman, Jace M. Rearick,University of Pittsburgh, Johnstown, PA, United States

4:27pm – Outcomes of the Student Mentoring andResearch Training (SMART) ProgramTechnical Paper Publication. IMECE2018-88684Nazmul Islam, Amy Weimer, University of Texas Rio GrandeValley, Edinburg, TX, United States

4:48pm – 3D Food Printing Insights and Opportunities: ACapstone Design Case StudyTechnical Presentation. IMECE2018-88770Joseph Piacenza, University of West Florida, Pensacola, FL,United States, Hope Weiss, Monika Patel, Sean Moore, TamNguyen, California State University Fullerton, Fullerton, CA,United States

5:09pm – The Concept of Integrated Research inEngineering EducationTechnical Presentation. IMECE2018-88887Mohammad Asaduzzaman Chowdhury, Dhaka University ofEngineering & Technology, Gazipur, Gazipur, Bangladesh,Bengir Ahmed Shuvho, Dhaka University of Engineering &Technology, Dhaka, Bangladesh, Uttam Kumar Debnath,Rajib Nandee, Dhaka University of Engineering & Technology,Gazipur, Gazipur, Bangladesh, Suman Das, University ofSaskatchewan, Saskatchewan, SK, Canada, Atiqur Rahman,Bangladesh Road Transport Authority, Dhaka, Bangladesh


7-8 DISTANCE/ONLINE ENGINEERINGEDUCATION, MODELS AND ENABLINGTECHNOLOGIES7-8-1 Distance/Online Engineering, Models andEnabling Technologies – IThird Floor, David L. Lawrence Convention Center, Room 317

8:55am–10:40am

Session Chair: Mohammad Naraghi, Manhattan College,Bronx, NY, United States

8:55am – Immersive Educational Systems With Procedure-Oriented Combinations of Real and Virtual EnvironmentsTechnical Paper Publication. IMECE2018-86597Zhou Zhang, CUNY New York City College of Technology,Jersey City, NJ, United States, Shaojin Zhang, New York CityCollege of Technology, Brooklyn, NY, United States, MingshaoZhang, Southern Illinois University Edwardsville, Edwardsville,IL, United States, Sven Esche, Stevens Institute of Technology,Hoboken, NJ, United States

9:16am – Virtual Teach Pendant Interface for AndroidCellphones (VTPAC)Technical Paper Publication. IMECE2018-86865Giulia A. Ferri, Federal University of Techology, Curitiba,Parana, Brazil, Scott Walter, Asiri Tennakoon, VisualComponents, Lake Orion, MI, United States, Ana Djuric,Wayne State University, Detroit, MI, United States

9:37am – Real-Time Distance Courses to ImproveSatisfaction and Competence: A Case Study ofInternational Professors and Local StudentsTechnical Paper Publication. IMECE2018-86877Martha Elena Núñez, Tecnologico de Monterrey, Puebla,Puebla, Mexico, Juan-Carlos Rojas, Tecnologico deMonterrey, Monterrey, Nuevo León, Mexico

9:58am – Assessing the Impact of Using EducationalVideos in Teaching Engineering CoursesTechnical Paper Publication. IMECE2018-88216Essam Zaneldin, Waleed Ahmed, United Arab EmiratesUniversity, Al Ain, United Arab Emir.

10:19am – Development of a Virtual Objects Tool toEnhance Pedagogy of Thermodynamic ConceptsTechnical Presentation. IMECE2018-89415Sathyanarayanan Subramanian, Diana Bairaktarova, Scott Huxtable, Virginia Polytechnic Institute and StateUniversity, Blacksburg, VA, United States

TRACK 7 ENGINEERING EDUCATION – WEDNESDAY, NOVEMBER 14 / THURSDAY, NOVEMBER 15

85

7-10 TEACHING LABORATORIES, MACHINESHOP EXPERIENCES, AND TECHNOLOGY-AIDED LECTURING7-10-1 Teaching Laboratories, Machine ShopExperiences and Technology-Aided LearningThird Floor, David L. Lawrence Convention Center, Room 316

8:55am–10:40am

Session Chair: Salim Azzouz, Midwestern State University,Wichita Falls, TX, United States

8:55am – Incorporating Student-Led Design Projects inInstrumentation and Measurements LaboratoryTechnical Paper Publication. IMECE2018-86055Emine Celik Foust, York College of Pennsylvania, York, PA,United States

9:16am – Introduction of Prevention Engineering inMechanical Engineering CurriculumTechnical Presentation. IMECE2018-86447Zbigniew Bzymek, University of Connecticut, Storrs, CT,United States

9:37am – A Gear-Chain Based Transmission for theMachine Elements Design LaboratoryTechnical Paper Publication. IMECE2018-87107Salim Azzouz, Guy Bernard, Midwestern State University,Wichita Falls, TX, United States

9:58am – Manufacturing Science Laboratory: RoboticUltrasonic WeldingTechnical Paper Publication. IMECE2018-88437Michael Mauk, Richard Chiou, Carlos Ruiz, Prashant Yadav,Drexel University, Philadelphia, PA, United States

10:19am – A Proposed Engineering Curriculum for At-RiskStudentsTechnical Presentation. IMECE2018-88921Louis Everett, University of Texas El Paso, El Paso, TX, UnitedStates

7-3 ENGINEERING ACCREDITATION, DATACOLLECTION, ASSESSMENT AND ABET7-3-1 Engineering Accreditation, Data Collection,Assessment and ABET Session IThird Floor, David L. Lawrence Convention Center, Room 316

10:50am–12:35pm

Session Chair: Amir Karimi, University of Texas-San Antonio,San Antonio, TX, United States

10:50am – Sensitising Core Employability Skill ThroughPeer Assessment ApproachTechnical Paper Publication. IMECE2018-86056Siddharthsinh Jadeja, Aditya Silver Oak Institute ofTechnology, Rajkot Gujarat, India, Sujata Wadhwa, FSO,Ahmedabad, India, Kapil Shukla, Silver Oak College ofEngineering & Technology, Ahmedabad, India, Amit Ved,Marwadi University, Rajkot, India

11:11am – An Excel Add-in for Accreditation DataCollection and Auto Grading Sheets (AGS): A CanadianExperienceTechnical Paper Publication. IMECE2018-88096Mohamed Ismail, University of Regina, Regina, SK, Canada

11:32am – Improving Engineering Students’ College MathReadiness by MSEIP Summer Bridge ProgramTechnical Paper Publication. IMECE2018-88685Nazmul Islam, Yong Zhou, University of Texas Rio GrandeValley, Edinburg, TX, United States

11:53am – Implementation of a New Student OutcomeAssessment and Continuous Improvement Procedure forABET-ETAC at SUNY MorrisvilleTechnical Presentation. IMECE2018-88855Mehmet Murat Baysal, SUNY Morrisville State College,Morrisville, NY, United States

7-8 DISTANCE/ONLINE ENGINEERINGEDUCATION, MODELS AND ENABLINGTECHNOLOGIES7-8-2 Distance/Online Engineering, Models andEnabling Technologies- IIThird Floor, David L. Lawrence Convention Center, Room 317

10:50am–12:35pm

Session Chair: Mohammad Naraghi, Manhattan College,Bronx, NY, United States

10:50am – Development of Telepresence Teaching RobotsWith Social CapabilitiesTechnical Paper Publication. IMECE2018-86686Mingshao Zhang, Pengji Duan, Southern Illinois UniversityEdwardsville, Edwardsville, IL, United States, Zhou Zhang,CUNY New York City College of Technology, Jersey City, NJ,United States, Sven Esche, Stevens Institute of Technology,Hoboken, NJ, United States

11:11am – The Positive Effects of Using Social Networks inCourses of Applied Mechanics on Students’ PerformanceTechnical Paper Publication. IMECE2018-87217Miguel X. Rodriguez-Paz, Jorge A. Gonzalez-Mendivil, J.Asuncion Zarate-Garcia, Luis O. Peña-Ortega, Tecnologicode Monterrey, Puebla, Puebla, Mexico

11:32am – Assessment of Three-Dimensional CAD ModelsUsing CAD Application Programming InterfaceTechnical Paper Publication. IMECE2018-87776Sung-hwan Joo, Grand Valley State University, Grand Rapids,MI, United States

11:53am – Student Engagement Through Service LearningProjectTechnical Presentation. IMECE2018-89923Shah Alam, Ulan Dakeev, Texas A&M University - Kingsville,Kingsville, TX, United States

TRACK 7 ENGINEERING EDUCATION – THURSDAY, NOVEMBER 15

86

7-3 ENGINEERING ACCREDITATION, DATACOLLECTION, ASSESSMENT AND ABET7-3-2 Engineering Accreditation, Data Collection,Assessment and ABET Session IIThird Floor, David L. Lawrence Convention Center, Room 316

2:05pm–3:50pm

Session Chair: Amir Karimi, University of Texas-San Antonio,San Antonio, TX, United States

2:05pm – OBACIS Analytics: The CatalogsTechnical Paper Publication. IMECE2018-88168Mohamed Ismail, University of Regina, Regina, SK, Canada

2:26pm – Cooperation of Three Faculty Members inAssessment of Student Knowledge in Two Sections of anUndergraduate CourseTechnical Presentation. IMECE2018-89562Amir Karimi, Ender Finol, Randall Manteufel, University ofTexas at San Antonio, San Antonio, TX, United States

2:47pm – Implementing the Wright State Model forEngineering Mathematics at University of Detroit MercyTechnical Presentation. IMECE2018-89513Shuvra Das, University of Detroit Mercy, Detroit, MI, UnitedStates

3:08pm – Mechanical Systems Senior Capstone DesignCourse ExperiencesTechnical Presentation. IMECE2018-89261Raghu Echempati, Kettering University, Flint, MI, UnitedStates

7-7 PROBLEM SOLVING IN ENGINEERINGEDUCATION, RESEARCH AND PRACTICE7-7-1 Problem Solving in Engineering Education,Reseach and Practice – IThird Floor, David L. Lawrence Convention Center, Room 315

2:05pm–3:50pm

Session Chair: Zbigniew Bzymek, University of Connecticut,Storrs, CT, United States

2:05pm – Finite Element Educational Program ImprovesMechanical Engineering Technology Student Performancein the Finite Element ClassTechnical Paper Publication. IMECE2018-86583Serdar Ozlek, New York City College of Technology, CUNY,Brooklyn, NY, United States

2:26pm – Effective Approach to Teaching Stress andDeformation Analysis in Mechanical Engineering DesignTechnical Paper Publication. IMECE2018-86732Zbigniew Bzymek, University of Connecticut, Storrs, CT,United States

2:47pm – Post-Graduation Assessment of the Effectivenessof an Industrially Sponsored Senior Design CapstoneCourseTechnical Paper Publication. IMECE2018-86812Vito Moreno, Bryan Weber, Thomas Barber, University ofConnecticut, Storrs, CT, United States

3:08pm – The Effect of Psychological Strategies inEngineering EducationTechnical Presentation. IMECE2018-88925Mohammad Asaduzzaman Chowdhury, Dhaka University ofEngineering & Technology, Gazipur, Gazipur, Bangladesh,Bengir Ahmed Shuvho, Dhaka University of Engineering &Technology, Dhaka, Bangladesh, Uttam Kumar Debnath,Rajib Nandee, Dhaka University of Engineering & Technology,Gazipur, Gazipur, Bangladesh, Suman Das, University ofSaskatchewan, Saskatchewan, SK, Canada, Md. Mir SakibAhmed, Dhaka University of Engineering & Technology,Gazipur, Gazipur, Bangladesh

3:29pm – Real (Out of This) World Education and Research:A Decade of Experience in Operating Professional SpaceMissionsTechnical Presentation. IMECE2018-89122Christopher Kitts, Santa Clara University, Santa Clara, CA,United States

7-6 FLUID MECHANICS, HEAT TRANSFER,EXPERIMENTS AND ENERGY SYSTEMS7-6-1 Fluid Mechanics, Heat Transfer, Experimentsand Energy SystemsThird Floor, David L. Lawrence Convention Center, Room 316

4:00pm–5:45pm

Session Chair: Wael Mokhtar, Grand Valley State University,Grand Rapids, MI, United States

4:00pm – Fabrication and Plumbing Works Using PipeFusion Thermal Technology: A Mechanical EngineeringExtension Service for the Drug DependentsTechnical Presentation. IMECE2018-89183Ronald Galindo, Cebu Technological University, Cebu City,Philippines

4:21pm – An Experimental and Numerical Study on AirfoilFlow Characteristics: Evaluating the Problem-Solving Skillsof StudentsTechnical Presentation. IMECE2018-89475Sanjivan Manoharan, Dylan DiGiovanni, Jordan O’Hearn,Grand Valley State University, Grand Rapids, MI, United States

4:42pm – Macgyvering and Entrepreneurial MindsetLearning: Examples for the Thermodynamics ClassroomTechnical Presentation. IMECE2018-89579Natasha Vermaak, Yaozhong Zhang, Yangze Sun, LehighUniversity, Bethlehem, PA, United States


87

5:03pm – Examples of Undergraduate Research Project inThermodynamics: Generalized Correlations of VaporPressure and Enthalpy of VaporizationTechnical Presentation. IMECE2018-89747Amir Karimi, Joseph Stephen Fernandez, University of Texasat San Antonio, Victoria, TX, United States

7-7 PROBLEM SOLVING IN ENGINEERINGEDUCATION, RESEARCH AND PRACTICE7-7-2 Problem Solving in Engineering Education,Reseach and Practice – IIThird Floor, David L. Lawrence Convention Center, Room 315

4:00pm–5:45pm

Session Chair: Zbigniew Bzymek, University of Connecticut,Storrs, CT, United States

4:00pm – Using Engineering Equation Solver (EES) to SolveEngineering Problems in Mechanical EngineeringTechnical Paper Publication. IMECE2018-86078Haifa El-Sadi, Wentworth Institute of Technology, Boston, MA,United States

4:21pm – Problem Based Learning: Generating a 3DEducational Brain Model to Engage UndergraduateEngineering Honors StudentsTechnical Paper Publication. IMECE2018-87197Connie Gomez, Sheema Nasir, San Jacinto College, Houston,TX, United States

4:42pm – Hands-on Experiences for Problem Solving inEngineering Education Based on Trees and PlantsTechnical Paper Publication. IMECE2018-87583Gustavo Vargas-Silva, University of the Basque Country, SanSebastian, Gipuzkoa, Spain, Mariappan Jawaharlal, CaliforniaState Polytechnic University, Pomona, Pomona, CA, UnitedStates

5:03pm – Strategies to Address “Design Thinking” inEngineering CurriculumTechnical Paper Publication. IMECE2018-87816Devdas Shetty, Jiajun Xu, University of the District ofColumbia, Washington, DC, United States


88

8-1-1: Energy-Related Multidisciplinary – 1

8-1-2: Energy-Related Multidisciplinary – 2

8-2-1: Energy and Exergy Analysis of Power Cycles

8-2-2: Thermodynamics of Cooling and Thermal Processes

8-2-3: Chemical Thermodynamic Processes

8-2-4: On Entropy and Irreversibilities’ Minimization

8-3-1: Thermoeconomics

8-4-1: Advanced Power Cycles

8-4-2: Improvement in Performance and Emissions of Energy Systems

8-4-3: Solar/Waste-Heat Power Generation

8-4-4: Engines Behaviour and Fuel Characteristics

8-4-5: Design and Analysis of Energy Systems – 1

8-4-6: Design and Analysis of Energy Systems – 2

8-5-1: Energy Systems Components – 1

8-5-2: Energy Systems Components – 2

8-6-1: Low-Temperature Energy Conversion Systems

8-7-1: Thermal Energy Storage – Devices I

8-7-2: Thermal Energy Storage – Materials

8-7-3: Thermal Energy Storage – Devices II

8-7-4: Thermal Energy Storage – Systems Integration

8-8-1: Environmental Aspects of Energy Systems

8-9-1: CoolingTechnologies

8-9-2: Building Energy Generation

8-9-3: Building Structure/Materials for Load Reduction

8-10-1: Advanced Technologies for Wind Energy

8-10-2: Advanced Technologies for Solar Energy

8-10-3: Advanced Technologies for Ocean Energy

8-10-4: Advanced Technologies for Wind Energy II

8-10-5: AdvancedTechnologies for Solar Energy II

8-10-6: Energy Storage, Energy Harvesting, and Electric Cars

8-10-7: Biomass, Geothermal, and Small Scale Generation

8-10-8: Feasibility andTechno-Economic Analysis of Renewable Energy Technologies

8-11-1: Lithium Ion Batteries – Design and Performance

8-11-2: Modeling Efforts in Batteries

8-11-3: Structural Analysis of Li-Ion Batteries

8-11-4: Thermal Aspects of Li-Ion Batteries

8-11-5: Beyond Li-Ion Batteries

8-12-1: PEM Fuel Cells – I

8-12-2: PEM Fuel Cells – II

8-12-3: Fuel Cell Systems and Infrastructure

8-14-1: Nuclear Power Plants: Design, Analysis, and Safety

8-15-1: CMS-Biofuel Systems and Processes

8-16-1: CMS-Biofuels Production, Conversion, and Simulation

8-17-1: Energy Plenary

8-13-1 Plenary

Track OrganizersRoberto Carapellucci, University of

L’Aquila, ItalyYunho Hwang, University of Maryland,

United StatesChristopher Depcik, University of

Kansas, United States

Topic OrganizersClaudia Toro, University of Rome

Sapienza DMA, Italy Mahmoud Elsharafi, Midwestern State

University, United StatesIrene Koronaki, NTUA, Greece Michael Nitsas, National Technical

University of Athens, GreeceVittorio Verda, Politecnico di Torino –

Dip Energetica Politech, ItalyRoberto Capata, University of Rome,

ItalyAndrea Lazzaretto, University of Padua,

ItalyAdriano Sciacovelli, University of

Birmingham, United KingdomHelena Navarro, University of

Birmingham, United KingdomJeyhoon Khodadadi, Auburn University,

United StatesElisa Guelpa, Politecnico di Torino –

DENERG, ItalyYoshiharu Amano, Waseda University,

Tokyo, JapanNavid Goudarzi, UNCC, United States Jim Kuo, California State University –

Los Angeles, United StatesSoumik Banerjee, Washington State

University, United States George Nelson, University of Alabama in

Huntsville, United States Partha Mukherjee, Purdue University,

United States

Soumik Banerjee, Washington StateUniversity, United States

Hakan Ozaltun, Idaho NationalLaboratory, United States

Jovica Riznic, Canadian Nuclear SafetyCommission, Canada

Yunye Shi, St. Ambrose University,United States

Seyed Allameh, Northern KentuckyUniversity, United States

Albert Ratner, University of Iowa, UnitedStates


Mohsen Saffari Pour, KTH Royal Instituteof Technology, Sweden

Ahmed Emara, Faculty of EngineeringMattaria –Cairo, Egypt

Session OrganizersMahmoud Elsharafi, Midwestern State

University, United States Claudia Toro, University of Rome

Sapienza DMA, ItalyMichael Nitsas, National Technical

University of Athens, GreeceTatiana Morosuk, Technical University

Berlin, GermanyGeorge Tsatsaronis, Technical University

of Berlin, GermanyVittorio Verda, Politecnico di Torino – Dip

Energetica Politech, ItalyKhamid Mahkamov, Northumbria

University, United Kingdom Gregory Kowalski, Northeastern

University, United StatesQun Chen, Tsinghua University, ChinaAuteliano A Santos, Universidade

Estadual de Campinas, BrazilYousef Haseli, Central Michigan

University, United States

Andrea Lazzaretto, University of Padua,Italy

Adriano Sciacovelli, University ofBirmingham, United Kingdom

Maike Johnson, German AerospaceCenter (DLR), Germany

Peiwen Li, University of Arizona, UnitedStates

Angel D. Ramirez, Escuela SuperiorPolitécnica del Litoral, ESPOL,Ecuador

Elisa Guelpa, Politecnico di Torino –DENERG, Italy

Sayed M. Metwalli, Cairo University,Egypt

Hohyun Lee, Santa Clara University,United States

Navid Goudarzi, UNCC, United StatesEmrah Celik, University of Miami, United

StatesLea-Der Chen, Texas A&M University-

Corpus Christi, United StatesJose C. Pascoa, Universidade Da Beira

Interior, PortugalSoumik Banerjee, Washington State

University, United States Partha Mukherjee, Purdue University,

United StatesJovica Riznic, Canadian Nuclear Safety

Commission, Canada Hakan Ozaltun, Idaho National

Laboratory, United States Grant Hawkes, Idaho National

Laboratory, United StatesYunye Shi, St. Ambrose University,

United States Seyed Allameh, Northern Kentucky

University, United StatesAlbert Ratner, University of Iowa, United

States

TRACK 8 ENERGYMONDAY, NOVEMBER 12

8-4 DESIGN AND ANALYSIS OF ENERGYCONVERSION SYSTEMS8-4-1 Advanced Power CyclesThird Floor, David L. Lawrence Convention Center, Room 317

9:45am–11:30am

Session Chair: Khamid Mahkamov, Northumbria University,Newcastle upon Tyne, United Kingdom

Session Co-Chair: Roberto Carapellucci, University ofL’Aquila, L’Aquila, IT, Italy

9:45am – Power and Efficiency Optimizations for an OpenCycle Two-Shaft Gas Turbine Power PlantTechnical Paper Publication. IMECE2018-86246Huijun Feng, Wanli Zhang, Lingen Chen, Shaojun Xia, NavalUniversity of Engineering, Wuhan, China

10:06am – Novel Twin-Screw Stirling Cycle Machine forCryogenic and Refrigeration ApplicationsTechnical Paper Publication. IMECE2018-86853Khamid Mahkamov, Irina Makhkamova, Fadi Kahwash,Northumbria University, Newcastle upon Tyne, United Kingdom

10:27am – Thermal Design and Performance Prediction of aShell Condenser for Closed-Cycle Underwater VehiclesTechnical Paper Publication. IMECE2018-86999Peiyu Chen, Hongbin Yan, Gongnan Xie, NorthwesternPolytechnical University, Xi’an, China, Bengt Sunden, LundUniversity, Lund, Sweden

10:48am – Heat Pump-Organic Rankine Cycle (HP-ORC)Integrated Systems for Energy Storage ApplicationsTechnical Presentation. IMECE2018-87442Claudia Toro, University of Rome Sapienza DMA, Rome, Italy,Roberto Capata, Enrico Sciubba, Univerersity of Rome,Rome, Italy

11:09am – Thermodynamic Modeling of Allam CycleTechnical Paper Publication. IMECE2018-88079Najmus Saquib Sifat, Yousef Haseli, Central MichiganUniversity, MT Pleasant, MI, United States

8-5 ENERGY SYSTEMS COMPONENTS8-5-1 Energy Systems Components – 1Third Floor, David L. Lawrence Convention Center, Room 306

9:45am–11:30am

Session Chair: Roberto Capata, University of Rome, Roma, Italy

9:45am – On Numerical Investigation of Water Injection toScrew CompressorsTechnical Paper Publication. IMECE2018-86463Sham Rane, University of Oxford, Oxford, England, UnitedKingdom, Ahmed Kovacevic, Nikola Stosic, City UniversityLondon, London, United Kingdom, Graham Stupple, JaecklinGmbH, Augsburg, Bavaria, Germany

10:06am – A Performance Comparison for Electric andHydraulic MotorsTechnical Paper Publication. IMECE2018-86761Mohammed Al-Mudhafar, Noah Manring, University ofMissouri – Columbia, Columbia, MO, United States

10:27am – Design and Analysis of the Self-Powered Two-Lobe and Three-Lobe Continuous Mud-Pulse Turbo SirenTechnical Paper Publication. IMECE2018-87733Xiaobo Peng, Prairie View A&M University, Prairie View, TX,United States, Diwei Zhang, Prairie View A&M University,Cypress, TX, United States

10:48am – A Reforming Characteristics of a Mid-Temperature Methane-Steam Reformer With VariousConfigurationsTechnical Paper Publication. IMECE2018-88260Kyungin Cho, Sangseok Yu, Jinwon Yun, Chungnam NationalUniversity, Daejeon, Korea (Republic)

11:09am – Translator Dynamics and PerformanceComparison on One- and Two-Cylinder Free Piston EnginesTechnical Paper Publication. IMECE2018-88689Mehar Bade, Nigel Clark, Parviz Famouri, PriyaankaDeviGuggilapu, West Virginia University, Morgantown, WV, UnitedStates

8-6 LOW-TEMPERATURE ENERGYCONVERSION SYSTEMS8-6-1 Low-Temperature Energy Conversion SystemsThird Floor, David L. Lawrence Convention Center, Room 319

9:45am–11:30am

Session Chair: Andrea Lazzaretto, University of Padua, Italy,Padova, Italy

9:45am – Preliminary Design of a Lab-Scale OrganicRankine Cycle for Waste Heat Recovery ApplicationsTechnical Paper Publication. IMECE2018-86434Carlos Cabezas, José Mendoza, Iván Ponce, RafaelCantorin, Daniel Gonzales, Jessica Estrella, Sergio Peralta,Cesar Celis, Pontificia Universidad Católica del Perú, Lima,Peru

10:06am – Comparative Exergy-Based Analysis of the LNGRegasification Integrated Into Air Separation Units WithExternal or Internal Compression ProcessTechnical Presentation. IMECE2018-87551Tatiana Morosuk, Stefanie Tesch, George Tsatsaronis,Technical University of Berlin, Berlin, Germany

10:27am – Exergy-Based and Economic Evaluation ofCryogenics-Based Energy StorageTechnical Presentation. IMECE2018-87572Tatiana Morosuk, Sarah Hamdy, George Tsatsaronis,Technical University of Berlin, Berlin, Germany

TRACK 8 ENERGY – MONDAY, NOVEMBER 12

89

10:48am – Low-Temperature Thermal Energy HarvestingUsing Solid/Liquid Phase Change MaterialsTechnical Paper Publication. IMECE2018-87956Guangyao Wang, Dong Sam Ha, Kevin G. Wang, VirginiaTech, Blacksburg, VA, United States

11:09am – Design and Optimization of Flow Thermo-Electrochemical Cell to Harvest Low Temperature WasteHeatTechnical Presentation. IMECE2018-89546Ali Hussain Kazim, Aqib Javaid, Asif Mutahir, MuhammadFaraz, University of Engineering and Technology, Lahore,Lahore, Punjab, Pakistan

8-11 ELECTROCHEMICAL ENERGYCONVERSION AND STORAGE8-11-1 Lithium Ion Batteries—Design andPerformanceThird Floor, David L. Lawrence Convention Center, Room 318

9:45am–11:30am

Session Chair: Soumik Banerjee, Washington State University,Pullman, WA, United States

Session Co-Chair: George Nelson, University of Alabama inHuntsville, Huntsville, AL, United States

9:45am – Discovery and Development of a Fast ChargingLi-Ion BatteryTechnical Paper Publication. IMECE2018-87661Teng Liu, Xiao-Guang Yang, Pennsylvania State University,State College, PA, United States, Chao-Yang Wang,Pennsylvania State University, University Park, PA, UnitedStates

10:06am – Predicting Second-Life Aging in Lithium-IonBatteries Repurposed From Electric Vehicles Battery PacksTechnical Presentation. IMECE2018-88842Daniela Galatro, Carlos Da Silva, Olivier Trescases, ZheGong, Cristina H. Amon, University of Toronto, Toronto, ON,Canada

10:27am – A Comprehensive Review of DeformationInduced Short Circuit (ISC) in Li-Ion BatteriesTechnical Presentation. IMECE2018-88952Golam Newaz, Wayne State University, Ann Arbor, MI, UnitedStates, Leela Mohana Reddy Arava, Wayne State University,Farmington Hills, MI, United States, Sanket Mundhe, WayneState University, Detroit, MI, United States, Min Zhu, OmarFaruque, James Cheng, Saeed Barbat, Ford MotorCompany, Dearborn, MI, United States

10:48am – Characterization of Transport Parameters inNMC Cathode Phases Using X-ray Microtomography DataTechnical Presentation. IMECE2018-88285Thushananth Rajendra, University of Alabama in Huntsville,Huntsville, AL, United States, Aashutosh Mistry, PurdueUniversity, West Lafayette, IN, United States, Xianghui Xiao,Argonne National Laboratory, Lemont, IL, United States,Partha Mukherjee, Purdue University, West Lafayette, IN,United States, George Nelson, University of Alabama inHuntsville, Huntsville, AL, United States

11:09am – Measurement of Mechanical Properties andAssessment of Mechanical Degradation of Solid ElectrolyteInterphase (SEI) Formed With Carbonate-BasedElectrolytesTechnical Presentation. IMECE2018-89471Insun Yoon, Pradeep Guduru, Brown University, Providence,RI, United States

8-15 CMS-BIOFUEL PRODUCTION,GASIFICATION, AND COMBUSTION8-15-1 CMS-Biofuel Systems and ProcessesThird Floor, David L. Lawrence Convention Center, Room 316

9:45am–11:30am

Session Chair: Yunye Shi, St. Ambrose University, Davenport,IA, United States


9:45am – Modeling Woody Biomass Torrefaction ProcessTechnical Paper Publication. IMECE2018-87974Mahmudul Hasan, Yousef Haseli, Central MichiganUniversity, Mt. Pleasant, MI, United States

10:06am – Experimental and Simulation Studies of CornKernel Gasification in a Double Air Stage DowndraftReactorTechnical Paper Publication. IMECE2018-88010Yunye Shi, St. Ambrose University, Davenport, IA, UnitedStates, Diego M. Yepes Maya, Regis Nascimento, FederalUniversity of Itajuba, Itajuba, MG, Brazil, Tejasvi Sharma,Albert Ratner, University of Iowa, Iowa City, IA, United States,Electo E. Silva Lora, Federal University of Itajuba, Itajuba, MG,Brazil

10:27am – Physical (Steam) Activation of Post-GasificationBiochar Derived From Peach PitsTechnical Paper Publication. IMECE2018-88386Andres Munoz-Hernandez, Sina Dehghan, Gerardo Diaz,University of California – Merced, Merced, CA, United States

10:48am – Design, Flame Analysis and PerformanceEvaluation of a Laboratory Scale Bio Lantern Fueled UsingCow-Tallow Bio-DieselTechnical Presentation. IMECE2018-88991Onyemazuwa A. Azaka, Emmanuel C. Nwadike, NnamdiAzikiwe University, Awka, Anambra State/South-EasterNigerian, Nigeria


90

11:09am – Design and Construction of a Laboratory ScaleLantern for bio Fuel-Biodiesel Combustion and FlameStructure AnalysisTechnical Presentation. IMECE2018-88992Emmanuel C. Nwadike, Onyemazuwa A. Azaka, NnamdiAzikiwe University, Awka, Southeastern Nigeria, Nigeria

8-2 FUNDAMENTALS AND APPLICATIONSOF THERMODYNAMICS8-2-1 Energy and Exergy Analysis of Power CyclesThird Floor, David L. Lawrence Convention Center, Room 306

1:45pm–3:30pm

Session Chair: Michael Nitsas, National Technical University ofAthens, Zografou, Greece

1:45pm – Modeling and Performance Analysis of a Dual-Shaft Counter-Rotating Gas TurbineTechnical Paper Publication. IMECE2018-86146Qiao Zhou, Chinese Academy of Sciences, Beijing, China,Zhao Yin, Chunqing Tan, Qing Gao, Yongsheng Tian,Institute of Engineering Thermophysics, Chinese Academy ofSciences, Beijing, China

2:06pm – Triaxial Gas Turbine Performance Analysis forVariable Power Turbine Inlet Guide Vane Control LawOptimizationTechnical Paper Publication. IMECE2018-86161Tao Wang, Chinese Academy of Sciences, Beijing, China,Yongsheng Tian, Zhao Yin, Qing Gao, Chunqing Tan,Institute of Engineering Thermophysics, Chinese Academy ofSciences, Beijing, China

2:27pm – Performance Comparison and ParametricAnalysis of sCO2 Power Cycles ConfigurationsTechnical Paper Publication. IMECE2018-86843Ali Alsagri, University of Dayton, Beavercreek, OH, UnitedStates, Andrew Chiasson, Ahmad A. Aljabr, University ofDayton, Dayton, OH, United States

2:48pm – Thermo-Economic Analysis of an IntegratedSupercritical CO2 Brayton Cycle and Multiple EffectDesalination SystemsTechnical Paper Publication. IMECE2018-88409Sattam Alharbi, Mohamed L. Elsayed, Louis Chow,University of Central Florida, Orlando, FL, United States

3:09pm – Exergy and Energy Analysis of a Combined PowerCycleTechnical Presentation. IMECE2018-88917Almandhar AlNaamani, Sultan Qaboos University, Muscat,Muscat, Oman, Nabeel AlRawahi, Sultan Qaboos University,Al Khoud, Muscat, Oman

8-4 DESIGN AND ANALYSIS OF ENERGYCONVERSION SYSTEMS8-4-2 Improvement in Performance and Emissions ofEnergy SystemsThird Floor, David L. Lawrence Convention Center, Room 317

1:45pm–3:30pm

Session Chair: Gregory Kowalski, Northeastern University,Boston, MA, United States


1:45pm – Thermodynamic Performance Study of the SOFC-GT-RC System Fueled by LNG With Zero-CO2-EmissionTechnical Paper Publication. IMECE2018-86115Xiaoyu Yang, Hongbin Zhao, China University of Petroleum,Beijing, Beijing, China

2:06pm – MCFC-Based System for Active CO2 CaptureFrom Flue GasesTechnical Paper Publication. IMECE2018-86881Roberto Carapellucci, Roberto Cipollone, Davide DiBattista, University of L’Aquila, L’Aquila, Italy

2:27pm – Methanol Production From Coal—Performanceand Exergy Analysis of Synthesis Routes With an Entrainedand a Moving Bed GasifierTechnical Presentation. IMECE2018-87560Tatiana Morosuk, Timo Blumberg, George Tsatsaronis,Technical University of Berlin, Berlin, Germany

2:48pm – Energy and Exergy Analysis of a Biomass BasedCeramic PlantTechnical Paper Publication. IMECE2018-88046Diogo Esteves, Cândida Vilarinho, Manuel EduardoFerreira, Joana Carvalho, University of Minho, Guimarães,Portugal, Jorge Araújo, CVR - Centro para a Valorização deResíduos, Guimarães, Portugal, Jose Teixeira, University ofMinho, Guimarães, Portugal

3:09pm – Effect of Thermal Storage on the Performance ofResidential Scale Hybrid Tri-Generation SystemTechnical Presentation. IMECE2018-88213Varun Gaur, Vaibhav Sahdev, Northeastern University, Boston,MA, United States, Mansour Zenouzi, Wentworth Institute ofTechnology, Boston, MA, United States, Gregory Kowalski,Northeastern University, Boston, MA, United States


91

8-10 RENEWABLE ENERGY8-10-1 AdvancedTechnologies for Wind EnergyThird Floor, David L. Lawrence Convention Center, Room 319

1:45pm–3:30pm

Session Chair: Christopher Depcik, University of Kansas,Lawrence, KS, United States

Session Co-Chair: Navid Goudarzi, UNCC, Charlotte, NC,United States

1:45pm – Large-Eddy Simulation of Offshore Wind Farmsfor Power PredictionTechnical Paper Publication. IMECE2018-87965Micah Sandusky, Boise State University, Boise, ID, UnitedStates, Rey DeLeon, University of Idaho, Moscow, ID, UnitedStates, Inanc Senocak, University of Pittsburgh, Pittsburgh,PA, United States

2:06pm – Variable Twist Blade Transformation to ImproveWind Turbine PerformanceTechnical Paper Publication. IMECE2018-88433Hamid Khakpour Nejadkhaki, John Hall, University atBuffalo, State University of New York, Buffalo, NY, UnitedStates

2:27pm – Wind Farm Micrositing Layout Optimization UsingStackelberg Game Theory ApproachTechnical Presentation. IMECE2018-88978Ramin Farajifijani, Alfred University, Alfred, NY, United States,Saeed Ahmadian, University of Houston, Houston, TX, UnitedStates, Ehsan Ghotbi, Alfred University, Alfred, NY, UnitedStates

2:48pm – Numerical Investigation and Optimization ofConventional VAWT in Combination with ConvergentNozzleTechnical Presentation. IMECE2018-88765Mst Sunzida Ferdoues, Krishna Vijayaraghavan, SimonFraser University, North York, ON, Canada

3:09pm – Mini Wind Turbine for Small Scale PowerGeneration and Storage (Archimedes Wind Turbine Model)Technical Paper Publication. IMECE2018-88455Michael Ozeh, Ashreet Mishra, Xiuling Wang, PurdueUniversity Northwest, Hammond, IN, United States

8-11 ELECTROCHEMICAL ENERGYCONVERSION AND STORAGE8-11-2 Modeling Efforts in BatteriesThird Floor, David L. Lawrence Convention Center, Room 318

1:45pm–3:30pm


Session Co-Chair: Partha Mukherjee, Purdue University, WestLafayette, IN, United States

1:45pm – Machine Learning Based Understanding ofLithium-Ion Battery Performance DecayTechnical Presentation. IMECE2018-87162Ankit Verma, Partha Mukherjee, Purdue University, WestLafayette, IN, United States

2:06pm – Sodium Ion Transport in Sodium ThiophosphateGlasses: An Ab Initio Molecular Dynamics StudyTechnical Presentation. IMECE2018-88224Aniruddha Dive, Scott Beckman, Soumik Banerjee,Washington State University, Pullman, WA, United States

2:27pm – A Computer Experiment Based Real TimeSimulation Model for a Spirally-Wounded Lithium-Ion CellTechnical Presentation. IMECE2018-88509Chao Li, Rutgers University, Piscataway, NJ, United States,Assimina Pelegri, Rutgers University, East Brunswick, NJ,United States

2:48pm – Machine Learning Analysis of Degradation—Safety Interaction in Li-Ion CellsTechnical Presentation. IMECE2018-87819Daniel Juarez-Robles, Partha Mukherjee, Purdue University,West Lafayette, IN, United States, Judith Jeevarajan,Underwriters Laboratories Inc., Northbrook, IL, United States

3:09pm – Reactive Force Field Based Molecular DynamicsSimulations to Investigate Sodium Ion Transport in GlassyElectrolytesTechnical Presentation. IMECE2018-88207Aniruddha Dive, Scott Beckman, Soumik Banerjee,Washington State University, Pullman, WA, United States


92

8-16 CMS-BIOFUELS PRODUCTION,CONVERSION, AND SIMULATION8-16-1 CMS-Biofuels Production, Conversion, andSimulationThird Floor, David L. Lawrence Convention Center, Room 316

1:45pm–3:30pm

Session Chair: Albert Ratner, University of Iowa, Iowa City, IA,United States


1:45pm – A Life Cycle Assessment of Biofuel ProducedFrom Waste Cooking OilTechnical Paper Publication. IMECE2018-86301Sierra Spencer, Malia Scott, Nelson Macken, SwarthmoreCollege, Swarthmore, PA, United States

2:06pm – Understanding the Effect of Oxygenated BiofuelsAddition on Combustion Characteristics of GasolineTechnical Paper Publication. IMECE2018-86490Shrabanti Roy, Mississippi State University, Starkville, MS,United States, Saeid Zare, Omid Askari, Mississippi StateUniversity, Mississippi State, MS, United States

2:27pm – The Development of a Simple Alternative HybridEngine for Gasoline, LPG and BiogasTechnical Paper Publication. IMECE2018-86552Anchasa Pramuanjaroenkij, Amarin Tongkratoke, SirilukPhankhoksoong, Kasetsart University, Sakon Nakhon, SakonNakhon, Thailand, Sadik Kakac, Tobb University of Economicsand Technology, Ankara, Turkey

2:48pm – Effect of Diethyl Ether on the Performance andEmission Characteristics of Diesel “Rice Bran MethylEster” Biogas Fueled Dual Fuel Diesel EngineTechnical Presentation. IMECE2018-89362S.K. Mahla, IKG Punjab Technical University, Hoshiarpur,India, Haeng Muk Cho, Kongju National University, SouthKorea, Cheonan, Korea (Republic), Bhupendra SinghCahauhan, Lovely Professional University, Phagwara, Punjab,India

8-1 ENERGY-RELATEDMULTIDISCIPLINARY8-1-1 Energy-Related Multidisciplinary – 1Third Floor, David L. Lawrence Convention Center, Room 316

3:45pm–5:30pm

Session Chair: Mahmoud Elsharafi, Midwestern StateUniversity, Wichita Falls, TX, United States

Session Co-Chair: Claudia Toro, University of Rome SapienzaDMA, Roma, Italy

3:45pm – Deep Decarbonization of Total Global Energy:Hydrogen and Ammonia C-free Fuels versus Electricity asIntegrated CO2-Emission-Free Energy SystemsTechnical Presentation. IMECE2018-86186William Leighty, The Leighty Foundation, Juneau, AK, UnitedStates

4:06pm – Experimental Study of the Sustainability of aRenewable-Energy-Driven Residential System With HeatingLoadsTechnical Paper Publication. IMECE2018-86242Takao Kakizaki, Kosuke Hirano, Norio Morohashi, MasahitoOguma, Nihon University, Koriyama, Fukushima, Japan

4:27pm – Wet Gas Compressor Operation and PerformanceTechnical Paper Publication. IMECE2018-86562Martin Bakken, Tor Bjorge, Lars Eirik Bakken, NorwegianUniversity of Science and Technology, Trondheim, Norway

4:48pm – Energy Mix Forecasting in Abu Dhabi Using MixedInteger Linear ProgramTechnical Paper Publication. IMECE2018-87575Moza Al Naimi, Mohamed Ali, Khalifa University of Scienceand Technology, Masdar City, Abu Dhabi, United Arab Emir.,Gento Mogi, University of Tokyo, Tokyo, Japan

5:09pm – Energy Efficient Metal Mesh Fog Filters toSimultaneously Harness Atmospheric Fog-Water andRemove VOCsTechnical Presentation. IMECE2018-89731Ritwick Ghosh, Rakesh Sahu, Igor Zhitomirsky, McMasterUniversity, Hamilton, ON, Canada, Ranjan Ganguly, JadavpurUniversity, Kolkata, West Bengal, India, Ishwar K. Puri,McMaster Universiy, Hamilton, ON, Canada


93

8-2 FUNDAMENTALS AND APPLICATIONSOF THERMODYNAMICS8-2-2 Thermodynamics of Cooling and ThermalProcessesThird Floor, David L. Lawrence Convention Center, Room 315

3:45pm–5:30pm

Session Chair: Michael Nitsas, National Technical University ofAthens, Zografou, Greece

3:45pm – Thermoeconomic Analysis of a Solar MVCDesalination SystemTechnical Paper Publication. IMECE2018-86212Lei Gao, Gyeong Sung Kim, Yunho Hwang, University ofMaryland, College Park, MD, United States

4:06pm – A Comparative Study of Solar-Driven AbsorptionRefrigeration Cycles- Effect of the Utilized Working PairTechnical Presentation. IMECE2018-86864Michael Nitsas, Irene Koronaki, National Technical Universityof Athens, Zografou, Greece

4:27pm – Thermal Analysis of Phase Change Materials byUtilizing NanoparticlesTechnical Paper Publication. IMECE2018-87026Michael Nitsas, Irene Koronaki, Athanasios Beliotis,National Technical University of Athens, Athens, Greece

4:48pm – First and Second Law Analysis of a Flat PlateCollector Working With NanofluidsTechnical Paper Publication. IMECE2018-87782Michael Nitsas, Irene Koronaki, Loukia Prentza, NationalTechnical University of Athens, Athens, Greece

5:09pm – Experimental Investigation of EjectorRefrigeration System With Double CondensersTechnical Paper Publication. IMECE2018-88671H.H. Sait, King Abdulaziz University, Rabigh, Makkah, SaudiArabia, B.A. Habibullah, Nadim Turkman, King AbdulazizUniversity, Jeddah, Saudi Arabia, Hongbin Ma, University ofMissouri, Columbia, MO, United States

8-4 DESIGN AND ANALYSIS OF ENERGYCONVERSION SYSTEMS8-4-3 Solar/Waste-Heat Power GenerationThird Floor, David L. Lawrence Convention Center, Room 317

3:45pm–5:30pm

Session Chair: Tatiana Morosuk, Technical University Berlin,Berlin, Germany


3:45pm – Thermodynamic Performance Study on Solar-Assisted SOFC - GT Distributed Energy System Fueled byMethanolTechnical Paper Publication. IMECE2018-86114Qinlong Hou, Hongbin Zhao, China University of Petroleum,Beijing, Beijing, China

4:06pm – Supercritical CO2 Cycle Combined WithConcentrated Solar Tower TechnologyTechnical Presentation. IMECE2018-87578Tatiana Morosuk, Mohamed Noaman, George Tsatsaronis,Technical University of Berlin, Berlin, Germany

4:27pm – Exergy-Based Evaluation of a Waste-Heat DrivenTri-Generation System With CO2 as Working FluidTechnical Presentation. IMECE2018-87584Tatiana Morosuk, Jing Luo, George Tsatsaronis, TechnicalUniversity of Berlin, Berlin, Germany

4:48pm – Retrofitting Gas Turbine Units Parabolic TroughConcentrated Solar Power for Sustainable ElectricityGenerationTechnical Paper Publication. IMECE2018-87673Mohamed Ali, Wael Alnahdi, Sara Al Shamsi, WafaaAlantali, Shaikha Al Shehhi, Khalifa University of Science andTechnology, Masdar City, Abu Dhabi, United Arab Emir.

5:09pm – Development and Investigation of a Solar-BiogasHybrid Brayton Cycle for 100 kW Power GenerationTechnical Paper Publication. IMECE2018-87678Saad Alshahrani, Abraham Engeda, Michigan StateUniversity, East Lansing, MI, United States

8-5 ENERGY SYSTEMS COMPONENTS8-5-2 Energy Systems Components – 2Third Floor, David L. Lawrence Convention Center, Room 306

3:45pm–5:30pm

Session Chair: Roberto Capata, University of Rome, Roma, Italy

3:45pm – Design and Testing of a Micro-Bubble SeparationSystemTechnical Paper Publication. IMECE2018-86104Jordan Farina, Christopher Manderson, Phillip Tran,Heather Dillon, University of Portland, Portland, OR, UnitedStates

4:06pm – Experimental Study of a Robust Foil Regeneratorin the Oscillating FlowTechnical Paper Publication. IMECE2018-86702Koji Yanaga, Songgang Qiu, Pawan Yadav, West VirginiaUniversity, Morgantown, WV, United States

4:27pm – Effect of Geometric Configuration and Back PlateAddition in Minichannel Solar CollectorsTechnical Paper Publication. IMECE2018-87852Julio Perez, Sai Kiran Hota, Gerardo Diaz, University ofCalifornia – Merced, Merced, CA, United States

4:48pm – A Study of Water Transport of Hollow FiberMembranes Over Various Operating ConditionsTechnical Paper Publication. IMECE2018-88067Jongmin Chae, Sangseok Yu, Chungnam National University,Daejeon, Korea (Republic)


94

5:09pm – Structural Analysis of Ground Mounted SolarPanel ArrayTechnical Paper Publication. IMECE2018-88526Ashhar Tufail Mohammmad, Barun Pratiher, Indian Instituteof Technology Jodhpur, Jodhpur, Rajasthan, India

8-10 RENEWABLE ENERGY8-10-2 AdvancedTechnologies for Solar EnergyThird Floor, David L. Lawrence Convention Center, Room 319

3:45pm–5:30pm



3:45pm – Thermal Modeling of Concentrated PhotovoltaicThermal System at Different Operating ConditionsTechnical Paper Publication. IMECE2018-86899Shah Alam, Rahul C. Yelamanchili, Texas A&M University -Kingsville, Kingsville, TX, United States

4:06pm – Harnessing of Solar Energy With and WithoutTrackingTechnical Presentation. IMECE2018-89922Mehmet Sozen, Grand Valley State University, Grand Rapids,MI, United States, Md. Nahid Pervez, Ford Motor Company,Palo Alto, CA, United States

4:27pm – Optimization of Nano-Texture Parameters ofCdTe/CdS Thin Film Solar CellsTechnical Paper Publication. IMECE2018-86858Joshua Smay, Ola Rashwan, James Then, Penn State-Harrisburg, Middletown, PA, United States

4:48pm – Solar Photovoltaic Power Plant Development fora Desert ClimateTechnical Paper Publication. IMECE2018-86588Abdullah Alanezi, Mohammad Naraghi, Manhattan College,Bronx, NY, United States

5:09pm – Photovoltaic Solar Energy: Potentials andOutlooksTechnical Paper Publication. IMECE2018-86991Williams S. Ebhota, Tien-Chien Jen, University ofJohannesburg, Johannesburg, South Africa

8-11 ELECTROCHEMICAL ENERGYCONVERSION AND STORAGE8-11-3 Structural Analysis of Li-ion BatteriesThird Floor, David L. Lawrence Convention Center, Room 318

3:45pm–5:30pm

Session Chair: George Nelson, University of Alabama inHuntsville, Huntsville, AL, United States

3:45pm – In Situ Measurement of Plane Strain Modulus ofthe Solid Electrolyte Interphase (SEI) on Lithium MetalAnodes in Ionic Liquid ElectrolytesTechnical Presentation. IMECE2018-89473Insun Yoon, Pradeep Guduru, Brown University, Providence,RI, United States

4:06pm – Tuning Electrode Structure to Improve the RateCapability of Energy Dense Lithium Ion BatteriesTechnical Presentation. IMECE2018-89998Prehit Patel, Thushananth Rajendra, George Nelson,University of Alabama in Huntsville, Huntsville, AL, UnitedStates

4:27pm – Local Strain Assessment in Li-Ion Battery LayersSubjected to External DeformationTechnical Presentation. IMECE2018-88962Golam Newaz, Wayne State University, Ann Arbor, MI, UnitedStates, Leela Mohana Reddy Arava, Wayne State Univeristy,Farmington Hills, MI, United States, Sanket Mundhe, WayneState Univeristy, Detroit, MI, United States, Min Zhu, OmarFaruque, James Cheng, Saeed Barbat, Ford MotorCompany, Dearborn, MI, United States

4:48pm – Real-Time Measurement of Phase Transformationin Electrode Materials by Integrating In Situ PicosecondUltrasonics and Atomic Force MicroscopyTechnical Presentation. IMECE2018-89477Shaghayegh Rezazadeh Kalehbasti, LiWei Liu, HumphreyMaris, Pradeep Guduru, Brown University, Providence, RI,United States

5:09pm – Effect of Stress on the Li Diffusivity in GeElectrodeTechnical Presentation. IMECE2018-89295Siva P.V. Nadimpalli, Rajasekhar Tripuraneni, SubhajitRakshit, New Jersey Institute of Technology, Newark, NJ,United States


95


8-17 ENERGY PLENARY8-17-1 Energy PlenaryThird Floor, David L. Lawrence Convention Center, Room 302

8:00am–8:45am

8:00am – Thoughts on the Future of Power Generation: A Low Carbon PerspectivePlenary Presentation. IMECE2018-90099Ahmed Ghoniem, Massachusetts Institute of Technology,Cambridge, MA, United States

8-1 ENERGY-RELATEDMULTIDISCIPLINARY8-1-2 Energy-Related Multidisciplinary – 2Third Floor, David L. Lawrence Convention Center, Room 315

10:00am–11:45am

Session Chair: Claudia Toro, University of Rome SapienzaDMA, Roma, Italy

Session Co-Chair: Mahmoud Elsharafi, Midwestern StateUniversity, Wichita Falls, TX, United States

10:00am – Measurements of the Contact Angles for VariousFluids Which Are Widely Used in the Oilfields to Improve OilRecoveryTechnical Paper Publication. IMECE2018-86717Mahmoud Elsharafi, Kelton Vidal, Rumelia Thomas,Midwestern State University, Wichita Falls, TX, United States

10:21am – On-Board State of Health Estimation of LithiumIon Batteries With Incremental Capacity Analysis Based onGaussian FunctionTechnical Paper Publication. IMECE2018-86902Tongyi Liang, Lingjun Song, Beihang University, Beijing,China

10:42am – Effect of Nonlinear Characteristic of the GasTurbine Engine Fuel System With Hardware-in-the-LoopTechnical Paper Publication. IMECE2018-86922Jinwei Chen, Jingxuan Li, Shengnan Sun, Huisheng Zhang,Shanghai Jiao Tong University, Shanghai, China

11:03am – High Voltage Plasma Reactor for Treatment ofCarbon Dioxide and Oxygen GenerationTechnical Paper Publication. IMECE2018-87610Kamau Wright, University of Hartford, West Hartford, CT,United States

11:24am – Mechanical Testing and Modeling of theGraphite Anode of Lithium-Ion BatteriesTechnical Presentation. IMECE2018-89468Wei Li, Tsinghua University, Beijing, Beijing, China, Juner Zhu,Massachusetts Institute of Technology, Cambridge, MA, UnitedStates, Xia Yong, Tsinghua University, Beijing, Beijing, China,Elham Sahraei Esfahani, George Mason University, Fairfax,VA, United States

8-2 FUNDAMENTALS AND APPLICATIONSOF THERMODYNAMICS8-2-3 Chemical Thermodynamic ProcessesThird Floor, David L. Lawrence Convention Center, Room 311

10:00am–11:45am

Session Chair: George Tsatsaronis, Technical University ofBerlin, Berlin, Germany

Session Co-Chair: Michael Nitsas, National TechnicalUniversity of Athens, Zografou, Greece

10:00am – Ecological Performance of a GeneralizedRadiative System Light-Driven Engine (LDE) With [A]f [B]Reacting System Improved by Controlling Piston MotionTechnical Paper Publication. IMECE2018-86252Huijun Feng, Kang Ma, Lingen Chen, Shaojun Xia, NavalUniversity of Engineering, Wuhan, China

10:21am – Avoidable and Unavoidable ExergeticDestruction Analysis of a Nitric Acid Production PlantTechnical Paper Publication. IMECE2018-87495Juan Fajardo, Universidad Tecnológica de Bolívar, Cartagena,Colombia, Harold Valle, University of Puerto Rico, Cartagena,Cartagena, Colombia, Ana Buelvas, Universidad Tecnológicade Bolívar, Catagena de Indias, Bolivar, Colombia

10:42am – Advances in Combustion Irreversibility Analysisby Using a Heuristic Finite Increment MethodTechnical Presentation. IMECE2018-89270Yuejun Yan, Noam Lior, University of Pennsylvania,Philadelphia, PA, United States

11:03am – Influence of Advanced Injection Timing onExergy Anaysis of DI Diesel Engine Fuelled With WasteCooking Oil BiodieselTechnical Presentation. IMECE2018-89534Veena Chaudhary, Indian Institute of Technology Roorkee,Roorkee, Uttrakhand, India

11:24am – Extending Degree of Disequilibrium Analysis forAutomatic Selection of Kinetic Constraints in the Rate-Controlled Constrained-Equilibrium MethodTechnical Paper Publication. IMECE2018-86509Fatemeh Hadi, Tennessee State University, Nashville, TN,United States, Vreg Yousefian, Tennessee State University,Carlisle, MA, United States, Ehsan Sarfaraz, Tennessee StateUniversity, Nashville, TN, United States, Gian Paolo Beretta,Universita di Brescia, Brescia, Italy

TRACK 8 ENERGY – TUESDAY, NOVEMBER 13

96

8-4 DESIGN AND ANALYSIS OF ENERGYCONVERSION SYSTEMS8-4-4 Engines Behaviour and Fuel CharacteristicsThird Floor, David L. Lawrence Convention Center, Room 316

10:00am–11:45am

Session Chair: Qun Chen, Tsinghua University, Beijing, China


10:00am – Development of Test Rigs to Investigate FluidFlow and Heat Transfer in a Stirling Engine Heater HeadTechnical Paper Publication. IMECE2018-86378Pawan Yadav, Songgang Qiu, Koji Yanaga, West VirginiaUniversity, Morgantown, WV, United States

10:21am – Power Flow Topology of Supercritical CarbonDioxide Power Generation System and Its Application inModeling and OptimizationTechnical Paper Publication. IMECE2018-87272Qun Chen, Xia Li, Xi Chen, Tsinghua University, Beijing, China

10:42am – Improvement in Thermal Efficiency of a FuelReforming Engine System Using Low ConcentrationHydrous EthanolTechnical Presentation. IMECE2018-87402Yuzo Shirakawa, Atsushi Shiamda, Takao Ishikawa, Hitachi,Ltd., Ibaraki, Japan, Toshio Shudo, Tokyo MetropolitanUniversity, Tokyo, Japan

11:03am – Lean-Burn Characteristics of a Heavy-DutyDiesel Engine Retrofitted to Natural Gas Spark IgnitionTechnical Paper Publication. IMECE2018-87761Jinlong Liu, Cosmin Dumitrescu, West Virginia University,Morgantown, WV, United States

11:24am – Effect of Piston Crevices on 3D Simulation of aHeavy-Duty Diesel Engine Retrofitted to Natural Gas SparkIgnitionTechnical Paper Publication. IMECE2018-87783Iolanda Stocchi, University of Perugia, Morgantown, WV,United States, Jinlong Liu, Cosmin Dumitrescu, West Virginia University, Morgantown, WV, United States, Michele Battistoni, Carlo N. Grimaldi, University of Perugia,Perugia, Italy

8-10 RENEWABLE ENERGY8-10-3 Advanced Technologies for Ocean EnergyThird Floor, David L. Lawrence Convention Center, Room 318

10:00am–11:45am

Session Chair: Navid Goudarzi, UNCC, Charlotte, NC, UnitedStates

10:00am – Gyroscopic Wave Energy Generator for FishFarms and RigsTechnical Paper Publication. IMECE2018-86188Alexandra Norbach, Western Norway University of AppliedSciences, Ågotnes, Norway, Kotryna Bedrovaite Fjetland,Western Norway University of Applied Sciences, Kverneland,Norway, Gina Hestetun, Thomas Impelluso, Western NorwayUniversity of Applied Sciences, Bergen, Bergen, Norway

10:21am – River Turbines Controlled by Mechanical SpeedConvertersTechnical Paper Publication. IMECE2018-88417Navid Goudarzi, UNCC, Charlotte, NC, United States, KyungSoo Han, DDMotion, Owings Mills, MD, United States

10:42am – Design and Optimization of a Tidal Turbine andFarmTechnical Paper Publication. IMECE2018-86264Mohammed Mayeed, Kennesaw State University, Marietta,GA, United States

11:03am – Effect of Oscillating Water Column ChamberInclination on the Performance of a Savonius RotorTechnical Paper Publication. IMECE2018-87313Deepak Prasad, Mohammed Rafiuddin Ahmed, University ofthe South Pacific, Suva, Fiji, Young-Ho Lee, Korea Maritimeand Ocean University, Busan, Korea (Republic)

11:24am – An Energy Harvester for Kuroshio PowerTechnical Presentation. IMECE2018-88870Bang-Fuh Chen, Shang-Yu Tsai, Wei-Ren Chen, NationalSun Yat-Sen University, Kaohsiung, Taiwan

8-11 ELECTROCHEMICAL ENERGYCONVERSION AND STORAGE8-11-4 Thermal Aspects of Li-ion BatteriesThird Floor, David L. Lawrence Convention Center, Room 317

10:00am–11:45am

Session Chair: Dervis Demirocak, Texas A&M University-Kingsville, Kingsville, TX, United States

10:00am – Effect of Thermal Gradient on LithiumElectrodepositionTechnical Presentation. IMECE2018-87621Conner Fear, Purdue University, Lafayette, IN, United States


97

10:21am – A Hybrid Thermal Management System WithNegative Parasitic Losses for Electric Vehicle BatteryPacksTechnical Paper Publication. IMECE2018-86111Shashank Arora, Kari Tammi, Aalto University, Espoo, Finland

10:42am – A Novel Technique for Estimation of the SolidElectrolyte Interphase Film Resistance for Li-Ion BatteriesTechnical Paper Publication. IMECE2018-87311Shashank Arora, Aalto University, Espoo, Finland

11:03am – Low-Temperature Energy Efficiency of Lithium-Ion BatteriesTechnical Paper Publication. IMECE2018-86582Ashkan Nazari, Virginia Tech, Blacksburg, VA, United States,Roja Esmaeeli, Seyed Reza Hashemi, HaniphAliniagerdroudbari, Siamak Farhad, University of Akron,Akron, OH, United States

8-2 FUNDAMENTALS AND APPLICATIONSOF THERMODYNAMICS8-2-4 On Entropy and Irreversibilities’ MinimizationThird Floor, David L. Lawrence Convention Center, Room 311

1:45pm–3:30pm

Session Chair: Tatiana Morosuk, Technical University Berlin,Berlin, Germany

Session Co-Chair: Michael Nitsas, National TechnicalUniversity of Athens, Zografou, Greece

1:45pm – An Easier Approach to Introduce Entropy inUndergraduate Thermodynamics ClassesTechnical Paper Publication. IMECE2018-86510Yousef Haseli, Central Michigan University, MT Pleasant, MI,United States

2:06pm – Exergy Analysis of a Machining Operation UsingFinite Element (FE) Assisted SimulationsTechnical Paper Publication. IMECE2018-88494Mohamed Gadalla, American University of Sharjah, Sharjah,United Arab Emir., Salman Pervaiz, Rochester Institute ofTechnology - Dubai, Dubai, Dubai, United Arab Emir.

2:27pm – Entropy Generation Minimization for Energy-Efficient DesalinationTechnical Paper Publication. IMECE2018-88543John Lienhard V, Massachusetts Institute of Technology,Cambridge, MA, United States

2:48pm – Spontaneous Violations of the Second Law ofThermodynamics, Nanoscale Fluid Mechanics, andPoromechanicsTechnical Presentation. IMECE2018-88826Martin Ostoja-Starzewski, University of Illinois at Urbana-Champaign, Urbana, IL, United States

3:09pm – Generalized Thermodynamic Dynamic-Optimization of Irreversible ProcessesTechnical Presentation. IMECE2018-88893Lingen Chen, Naval University of Engineering, Wuhan, China

8-4 DESIGN AND ANALYSIS OF ENERGYCONVERSION SYSTEMS8-4-5 Design and Analysis of Energy Systems – 1Third Floor, David L. Lawrence Convention Center, Room 316

1:45pm–3:30pm

Session Chair: Auteliano A. Santos, Universidade Estadual deCampinas, Campinas, SP, Brazil


1:45pm – Ecological Optimization for an EndoreversibleChemical Pump With Three Mass ReservoirsTechnical Paper Publication. IMECE2018-86250Lingen Chen, DAn Xia, Huijun Feng, Shaojun Xia, NavalUniversity of Engineering, Wuhan, China

2:06pm – Mechanical Design of Magnetic GearboxesOptimized for AssemblyTechnical Paper Publication. IMECE2018-86878Sina Modaresahmadi, Casey Nichols, Wesley Williams,University of North Carolina at Charlotte, Charlotte, NC, UnitedStates

2:27pm – Design of a Ducted Cross-Flow Turbine forMarine Current Energy ExtractionTechnical Paper Publication. IMECE2018-87324Jai N. Goundar, Deepak Prasad, Mohammed RafiuddinAhmed, University of the South Pacific, Suva, Fiji

2:48pm – Vibration Energy Harvesting to Power UltrasonicSensors in Heavy Haul Railway CarsTechnical Paper Publication. IMECE2018-87836Auteliano A. Santos, Matheus V. Lopes, Vanessa V.Goncalves, Jony Eckert, University of Campinas, Campinas,SP, Brazil, Thiago S. Martins, VALE S.A., Vitoria, ES, EspiritoSanto, Brazil

3:09pm – Reverberatory Furnace CFD Modeling forEfficient Design: Burners and Chimney LocationTechnical Paper Publication. IMECE2018-87843Mohamed Ali, Saeed Alshehhi, Khalifa University of Scienceand Technology, Masdar City, Abu Dhabi, United Arab Emir.


98

8-10 RENEWABLE ENERGY8-10-4 AdvancedTechnologies for Wind Energy IIThird Floor, David L. Lawrence Convention Center, Room 318

1:45pm–3:30pm


Session Co-Chair: Christopher Depcik, University of Kansas,Lawrence, KS, United States

1:45pm – Self-Excited Induction Generator (SEIG) forHydrogen and Ammonia C-Free Fuel Production WithoutElectricity Grid ConnectionTechnical Presentation. IMECE2018-87527William Leighty, The Leighty Foundation, Juneau, AK,United States, Eduard Muljadi, Auburn University, Auburn,AL, United States

2:06pm – CFD Analysis of a Cross-Flow Turbine for Windand Hydrokinetic ApplicationsTechnical Paper Publication. IMECE2018-88469Arian Hosseini, KTH Royal Institute of Technology, Stockholm,Sweden, Navid Goudarzi, UNCC, Charlotte, NC, United States

2:27pm – Wind Energy Assessment of Michigan City, UnitedStatesTechnical Paper Publication. IMECE2018-88412Michael Okorie, Uzumma O. Ozeh, Xiuling Wang, PurdueUniversity Northwest, Hammond, Armenia

2:48pm – The Value of Energy Flexibility: Integrating WindResources in New York StateTechnical Paper Publication. IMECE2018-87521Terence Conlon, Vijay Modi, Michael Waite, ColumbiaUniversity, New York, NY, United States

8-11 ELECTROCHEMICAL ENERGYCONVERSION AND STORAGE8-11-5 Beyond Li-ion BatteriesThird Floor, David L. Lawrence Convention Center, Room 317

1:45pm–3:30pm


1:45pm – Development of a Membraneless Organic RedoxFlow BatteryTechnical Paper Publication. IMECE2018-88024Korey Cook, Andre Benard, Michigan State University, East Lansing, MI, United States, Tom Guarr, Shane Mann,Michigan State University Bioeconomy Institute, Holland, MI,United States, Ethan Lau, Jordan Thayer, Michigan StateUniversity, East Lansing, MI, United States

2:06pm – CNT Reinforced Polymer Nanocomposites forThermochemical Energy Conversion and StorageTechnical Presentation. IMECE2018-89525Oluwafunmilola Ola, Yanqiu Zhu, University of Exeter, Exeter,United Kingdom

2:27pm – Robust Nitrogen-Doped Graphene on MetalReduced Organic Framework Catalyst for OxygenReduction ReactionsTechnical Presentation. IMECE2018-88936Harsimranjit Singh, Eon Soo Lee, Bharath Babu Nunna,Ashok Pullamsetty, New Jersey Institute of Technology,Newark, NJ, United States

2:48pm – The Effect of Nanoscale Architecture on IonicDiffusion in rGO/Aramid Nanofiber Structural Electrodesfor SupercapacitorsTechnical Presentation. IMECE2018-88911Sarah Aderyani, Haleh Ardebili, University of Houston,Houston, TX, United States

3:09pm – Improving Oil and Gas Operations by Integrationof Solid Oxide Fuel Cells in a Sustainable MannerTechnical Presentation. IMECE2018-88919Khalid Al-Khori, Yusuf Bicer, Muammer Koc, Hamad BinKhalifa University, Doha, Qatar

8-14 NUCLEAR POWER PLANTS: DESIGN,ANALYSIS, AND SAFETY8-14-1 Nuclear Power Plants: Design, Analysis, andSafetyThird Floor, David L. Lawrence Convention Center, Room 315

1:45pm–3:30pm

Session Chair: Jovica Riznic, Canadian Nuclear SafetyCommission, Ottawa, ON, Canada

Session Co-Chairs: Hakan Ozaltun, Grant Hawkes, IdahoNational Laboratory, Idaho Falls, ID, United States

1:45pm – Probabilistic Properties of Steel for NuclearPipingTechnical Paper Publication. IMECE2018-87054Kleio Avrithi, University of Houston - Downtown, Houston, TX,United States

2:00pm – Thermal Transport in Defective Actinide OxidesTechnical Paper Publication. IMECE2018-87605Alex Resnick, Katherine Mitchell, Jungkyu Park, HannahMaier, Eduardo Farfan, Tien Yee, Christian Velasquez,Kennesaw State University, Marietta, GA, United States

2:15pm – Thermo-Hydro-Chemo-Mechanical Modeling ofBentonite Extrusion in the Near Borehole CrackTechnical Presentation. IMECE2018-87944Mohammad Islam, National Energy Technology Laboratory,Pittsburgh, PA, United States

2:30pm – Thermal Model of the AGR-5/6/7 ExperimentTechnical Presentation. IMECE2018-88628Grant Hawkes, Idaho National Laboratory, Idaho Falls, ID,United States


99

2:45pm – Numerical Simulation of Sub-Cooled WaterFlashing Flow From Nuclear Steam Generator SecondarySide Through Broken Feed Water PipesTechnical Presentation. IMECE2018-88849Jong Chull Jo, Pusan National University/Korea Institute ofNuclear Safety, Busan, Korea (Republic), Jae Jun Jeong,Byong Jo Yun, Pusan National University, Busan, Korea(Republic), Soon-ho Kang, Korea Institute of Nuclear Safety,Daejon, Korea (Republic)

3:00pm – Thermo-Mechanical Performance Assessment ofSelected Plates From MP-1 Low Power ExperimentsTechnical Paper Publication. IMECE2018-86010Hakan Ozaltun, Barry H. Rabin, Idaho National Laboratory,Idaho Falls, ID, United States

8-3 THERMOECONOMICS8-3-1 ThermoeconomicsThird Floor, David L. Lawrence Convention Center, Room 317

3:45pm–5:30pm

Session Chair: Vittorio Verda, Politecnico di Torino, Torino,Italy

3:45pm – Thermoeconomic Analysis of Reverse BraytonCycle Based CryocoolerTechnical Paper Publication. IMECE2018-87190Aman Kumar Dhillon, Parthasarathi Ghosh, Indian Instituteof Technology Kharagpur, Kharagpur, West Bengal, India

4:06pm – Ground Level Integrated Diverse Energy Storage(GLIDES) Cost AnalysisTechnical Paper Publication. IMECE2018-87517Saiid Kassaee, University of Tennessee, Knoxville, TN, UnitedStates, Adewale Odukomaiya, Oak Ridge NationalLaboratory/Georgia Tech, Oak Ridge, TN, United States,Ahmad Abu-Heiba, Xiaobing Liu, Oak Ridge NationalLaboratory, Oak Ridge, TN, United States, Matthew M.Mench, University of Tennessee, Knoxville, TN, United States,Patrick W. O’Connor, Ayyoub M. Momen, Oak Ridge NationalLaboratory, Oak Ridge, TN, United States

4:27pm – Exergoeconomic Analysis Applied to a NovelConcept of Integrated Solar Combined CycleTechnical Presentation. IMECE2018-87596Tatiana Morosuk, Louay Elmorsy, George Tsatsaronis,Technical University of Berlin, Berlin, Germany

4:48pm – MED-MVC Systems: Exergy and Thermo-Economic Analysis ApproachTechnical Presentation. IMECE2018-88361Mohamed L. Elsayed, University of Central Florida, Orlando,FL, United States, Osama Mesalhy, Zagazig University,Zagazig, Sharkia, Egypt, Ramy Mohammed, Louis Chow,University of Central Florida, Orlando, FL, United States

5:09pm – Exergoeconomic Analysis of Intercooled,Reheated and Recuperated Gas Turbine Cycles With AirFilm Blade CoolingTechnical Paper Publication. IMECE2018-88483Mohamed Gadalla, Waleed El-Damaty, American Universityof Sharjah, Sharjah, United Arab Emir.

8-4 DESIGN AND ANALYSIS OF ENERGYCONVERSION SYSTEMS8-4-6 Design and Analysis of Energy Systems – 2Third Floor, David L. Lawrence Convention Center, Room 316

3:45pm–5:30pm

Session Chair: Yousef Haseli, Central Michigan University, MTPleasant, MI, United States


3:45pm – Specific Entropy Generation: A Measure ofInefficiencies in Power PlantsTechnical Presentation. IMECE2018-88730Yousef Haseli, Central Michigan University, MT Pleasant, MI,United States

4:06pm – A Novel Silica-Gel/Foam Packed Bed forAdsorption Cooling ApplicationsTechnical Presentation. IMECE2018-88913Ramy Mohammed, University of Central Florida, Orlando, FL,United States, Osama Mesalhy, Zagazig University, Zagazig,Sharkia, Egypt, Mohamed L. Elsayed, Louis Chow, Universityof Central Florida, Orlando, FL, United States

4:27pm – Development of Dynamic Model for MechanicalVapor Recompression System SimulationTechnical Presentation. IMECE2018-89124Le Wang, Hefei General Machinery Research Institute Co. Ltd.,Hefei, China, Guangbin Liu, Qingdao University of Scienceand Technology, Qingdao, China, Jun Xiao, Hefei GeneralMachinery Research Institute Co. Ltd., Hefei, China

4:48pm – Studying the Degradation of Platinum BasedProton Exchange Membrane Fuel Cells Using theNanoscale X-Ray Computed Tomography MethodTechnical Presentation. IMECE2018-89572Jonathan Braaten, Shohei Ogawa, Carnegie MellonUniversity, Pittsburgh, PA, United States, Venkata Yarlagadda,General Motors/University of Michigan, Ann Arbor, MI, UnitedStates, Anusorn Kongkanand, General Motors Company, FuelCell Activities, Pontiac, MI, United States, Shawn Litster,Carnegie Mellon University, Pittsburgh, PA, United States


100

8-7 THERMAL ENERGY STORAGE8-7-1 Thermal Energy Storage—Devices IThird Floor, David L. Lawrence Convention Center, Room 315

3:45pm–5:30pm

Session Chair: Adriano Sciacovelli, University of Birmingham,Birmingham, United Kingdom

3:45pm – Longer Passage of Airflow in Multiple Packed-Bed Thin Tanks Versus in a Short Big Tank for ImprovedThermal Storage PerformanceTechnical Paper Publication. IMECE2018-86123Yan Wang, Institute of Electrical Engineering, ChineseAcademy of Sciences, Beijing, China, Peiwen Li, University ofArizona, Tucson, AZ, United States, Zhifeng Wang, Bei Yang,Guofeng Yuan, Institute of Electrical Engineering, ChineseAcademy of Sciences, Beijing, China, Wenxun Tang,Guangdong Five Star Solar Energy, Dongguan, China

4:06pm – Design and Integration of High TemperatureLatent Heat Thermal Energy Storage for High Power LevelsTechnical Paper Publication. IMECE2018-86281Maike Johnson, German Aerospace Center (DLR), Stuttgart,Germany, Bernd Hachmann, F. W. Brökelmann AluminiumwerkGmbH & Co. KG, Ense, Germany, Andreas J. Dengel, SteagNew Energies GmbH, Saarbruecken, Germany, Michael Fiß,Matthias Hempel, Dan Bauer, German Aerospace Center(DLR), Stuttgart, Germany

4:27pm – Numerical Study of High TemperatureThermochemical Energy Storage Using Co3O4/CoOTechnical Paper Publication. IMECE2018-86329Nasser Vahedi, Qasim A. Ranjha, Alparslan Oztekin, Lehigh University, Bethlehem, PA, United States

4:48pm – Analytical and Computational Thermal Analysis of a Latent Heat Storage and Cooling System (LHSCS)Technical Presentation. IMECE2018-86565Francisco Montero, Mario Di Capua, Amador Guzmán,Pontificia Universidad Católica de Chile, Santiago, Chile,Daming Chen, Loreto Canales, Pontificia UniversidadCatolica de Chile, Macul, Region Metropolitana, Chile

8-8 ENVIRONMENTAL ASPECTS OFENERGY SYSTEMS8-8-1 Environmental Aspects of Energy SystemsThird Floor, David L. Lawrence Convention Center, Room 311

3:45pm–5:30pm

Session Chair: Angel D. Ramirez, Escuela Superior Politécnicadel Litoral, Guayaquil, Guayas, Ecuador

Session Co-Chair: Elisa Guelpa, Politecnico di Torino, Torino,Italy

3:45pm – Modelling Produced Water Re-Injection ScalingCompability Performance in Matured Hydrocarbon Aquifer,NigeriaTechnical Paper Publication. IMECE2018-86126Kingsley Abhulimen, Theophilus. A. Fashanu, University ofLagos, Nigeria, Nigeria, Peter Idialu, Department of SystemEngineering, Lagos, Nigeria

4:06pm – Some Studies on NOX Reduction From a DieselEngine Using Stabilized EmulsionTechnical Paper Publication. IMECE2018-87374Naveen Kumar, Delhi Technological University, Delhi, Delhi,India, Harveer Singh Pali, JSS Academy of TechnicalEducation, Noida, UP, India, SIdharth Bansal, MAIT, NewDelhi, Delhi, India

4:27pm – Mitigation of Greenhouse Gas Emissions Throughthe Shift From Fossil Fuels to Electricity in the MassTransport System in Guayaquil, EcuadorTechnical Paper Publication. IMECE2018-87732Angel D. Ramirez, Danilo Arcentales, Andrea J. Boero,Escuela Superior Politecnica del Litoral, Guayaquil, Guayas,Ecuador

4:48pm – Water Recovery in Cooling TowersTechnical Presentation. IMECE2018-88687Maher Damak, Karim Khalil, Kripa Varanasi, MassachusettsInstitute of Technology, Cambridge, MA, United States

5:09pm – Life-Cycle-Analysis of Novel Heat Exchanger forDry Cooling of Power Plants Based on Encapsulated PhaseChange MaterialsTechnical Presentation. IMECE2018-89633Lige Zhang, Swanand Bhagwat, Sabrina Spatari, Ying Sun,Drexel University, Philadelphia, PA, United States


101

8-10 RENEWABLE ENERGY8-10-5 AdvancedTechnologies for Solar Energy IIThird Floor, David L. Lawrence Convention Center, Room 318

3:45pm–5:30pm



3:45pm – Development of a Low Cost Self-Sustaining WaterDistillation System Using Activated Carbon NanofluidsTechnical Paper Publication. IMECE2018-86906Ashreet Mishra, Purdue University Northwest, Hammond, IN,United States, A.G. Agwu Nnanna, University of Texas of thePermian Basin, Odessa, TX, United States

4:06pm – Design and Testing of a Solar-Driven WastewaterTreatment Unit for Off-Grid ApplicationsTechnical Paper Publication. IMECE2018-87090Reza Baghaei Lakeh, California State Polytechnic University,Pomona, Pomona, CA, United States, Daniel Andrade,California State Polytechnic University, Pomona, Los Angeles,CA, United States, Kyle Miller, Mohammad Modabernia,Thuan Nguyen, Elbon Flanagan, Johnny Baradii, John Kest,David Jacobo, Justine Nguyen, Laura Lopez, Binh Phun,California State Polytechnic University, Pomona, Pomona, CA,United States, Saied Delagah, U.S. Bureau of Reclamation,Denver, CO, United States, Mohammadali Sharbatmaleki,California State Polytechnic University, Pomona, Pomona, CA,United States

4:27pm – Numerical Study of Nanofluid-Based SolarCollector for Humidification-Dehumidification (HDH)DesalinationTechnical Paper Publication. IMECE2018-87318Kapil Garg, Indian Institute of Technology Ropar, Rupnagar,PB, Punjab, India, Vikrant Khullar, Thapar Institute ofEngineering and Technology, Patiala, India, Patiala, Pujab,India, Sarit Kumar Das, Himanshu Tyagi, Indian Institute ofTechnology Ropar, Rupnagar, PB, Punjab, India

4:48pm – Performances Investigation of a SOFC-BasedDistributed Energy System Integrated With SolarThermochemical ProcessTechnical Presentation. IMECE2018-88392Taixiu Liu, Qibin Liu, Institute of Engineering Thermophysics,Chinese Academy of Sciences, Beijing, China, Jing Lei, NorthChina Electric Power University, Beijing, China, Jun Sui,Hongguang Jin, Institute of Engineering Thermophysics,Chinese Academy of Sciences, Beijing, Beijing, China


8-7 THERMAL ENERGY STORAGE8-7-2 Thermal Energy Storage—MaterialsThird Floor, David L. Lawrence Convention Center, Room 323

10:00am–11:45am

Session Chair: Maike Johnson, German Aerospace Center(DLR), Stuttgart, Germany

Session Co-Chair: Adriano Sciacovelli, University ofBirmingham, Birmingham, United Kingdom

10:00am – The Origin of Hydrophilic SurfaceFunctionalization-Induced Thermal ConductanceEnhancement across Solid-Water InterfacesTechnical Presentation. IMECE2018-86409Dezhao Huang, Ruimin Ma, University of Notre Dame, SouthBend, IN, United States, Tengfei Luo, University of NotreDame, Notre Dame, IN, United States, Teng Zhang,Schrodinger Inc., New York, NY, United States

10:21am – Experimental Study of Hygroscopy of Single andDifferent Mixtures of MgCl2, KCl, NaCl, ZnCl2 forApplication as Heat Transfer Fluids in CSPTechnical Paper Publication. IMECE2018-86416Xiaoxin Wang, Qichao Hu, Xiankun Xu, Peiwen Li, Gil-PyoKim, Dominic Gervasio, University of Arizona, Tucson, AZ,United States

10:42am – Thermal Analysis of a High-Temperature HeatPipe-Assisted Thermal Energy Storage System With Nano-Enhanced Phase Change MaterialTechnical Paper Publication. IMECE2018-86481Saeed Tiari, Mahboobe Mahdavi, Virensinh Thakore, StacyJoseph, Gannon University, Erie, PA, United States

11:03am – Non-Isothermal Phase Change Behaviors ofBinary Mixtures of D-Dulcitol and Pentaerythritol as NovelHeat Storage MaterialsTechnical Paper Publication. IMECE2018-87643Xuefeng Shao, Jun Wang, Liwu Fan, Zhejiang University,Hangzhou, Zhejiang, China

11:24am – Atomistic Modelling and ExperimentalCharacterization of Water Sorption OntoSilicoaluminophosphate Zeolites for Low TemperatureThermal Storage ApplicationsTechnical Presentation. IMECE2018-89000Eliodoro Chiavazzo, Matteo Fasano, Gabriele Falciani,Politecnico di Torino, Torino, Italy, Vincenza Brancato, CNR -Istituto di Tecnologie Avanzate per l’Energia “Nicola Giordano,”Messina, Italy, Valeria Palomba, Università di Messina,Messina, Italy, Pietro Asinari, Politecnico di Torino, Torino,Italy, Andrea Frazzica, CNR - Istituto di Tecnologie Avanzateper l’Energia “Nicola Giordano,” Messina, Italy

TRACK 8 ENERGY – TUESDAY, NOVEMBER 13 / WEDNESDAY, NOVEMBER 14

102

8-9 ENERGY SYSTEMS FOR BUILDINGS8-9-1 Cooling TechnologiesThird Floor, David L. Lawrence Convention Center, Room 319

10:00am–11:45am

Session Chair: Yunho Hwang, University of Maryland, CollegePark, MD, United States

10:00am – Thermal Performance of Earth-Air HeatExchanger Systems for Cooling Applications in ResidentialBuildingsTechnical Paper Publication. IMECE2018-86974Fadi Ghaith, Heriot Watt University Dubai Campus, Dubai,United Arab Emir., Habib Ur Razzaq, Heriot Watt University,Dubai, United Arab Emir.

10:21am – Using Adsorption Cooling and Thermal SolarCollection for Residential Cooling Applications in CanadaTechnical Paper Publication. IMECE2018-87246Jordan McNally, Christopher Baldwin, Cynthia A.Cruickshank, Carleton University, Ottawa, ON, Canada

10:42am – Thermal Modeling of a Building IntegratedRadiative Cooler for Space Cooling ApplicationsTechnical Paper Publication. IMECE2018-87456Ravita Lamba, Indian Institute of Technology Delhi, New Delhi,Delhi, India, Mehdi Zeyghami, David Young, D. YogiGoswami, University of South Florida, Tampa, FL, UnitedStates, S.C. Kaushik, Indian Institute of Technology Delhi, NewDelhi, New Delhi, India

11:03am – Economical and Non-Invasive ResidentialHuman Presence Sensing via Temperature MeasurementTechnical Paper Publication. IMECE2018-88211Chenli Wang, Hohyun Lee, Santa Clara University, SantaClara, CA, United States

11:24am – Neural Network Based Bin Analysis forIndirect/Direct Evaporative Cooling of Modular DataCentersTechnical Paper Publication. IMECE2018-88502Abhishek Uday Walekar, Ashwin Siddarth, University ofTexas at Arlington, Arlington, TX, United States, AbhishekGuhe, Mestex, A Division of Mestek Inc., Dallas, TX, UnitedStates, Nikita R. Sukthankar, Dereje Agonafer, University ofTexas at Arlington, Arlington, TX, United States

8-10 RENEWABLE ENERGY8-10-6 Energy Storage, Energy Harvesting, andElectric CarsThird Floor, David L. Lawrence Convention Center, Room 325

10:00am–11:45am

Session Chair: Emrah Celik, University of Miami, Pinecrest, FL,United States

10:00am – Increasing Energy Efficiency in Vehicles byHarvesting Wasted Engine HeatTechnical Paper Publication. IMECE2018-88253Emrah Celik, University of Miami, Pinecrest, FL, United States,Mutabe Aljaghtham, University of Miami, Miami, FL, UnitedStates

10:21am – Enhancement of Thermoelectric Figure of Meritof Bi2Te3 Using Carbon DotsTechnical Paper Publication. IMECE2018-88280Emrah Celik, University of Miami, Pinecrest, FL, United States,Cagri Oztan, University of Miami, Coral Gables, FL, UnitedStates, Yiqun Zhou, Roger LeBlanc, University of Miami,Miami, FL, United States, Sedat Ballikaya, Oguz Genc,Istanbul University, Istanbul, Turkey

10:42am – Design and Fabrication of Three Stages SolarStill With Two Focal Concentric CollectorsTechnical Presentation. IMECE2018-89027Fayadh Abed, Khalil Farhan, Muhammad Eleiwi, TikritUniversity, Tikrit, SalahAdeen, Iraq

11:03am – Evaluation of Thermal Energy Storage (TES)Systems on Thermo-Economic Characteristics of PTSCSolar-Based Power Generation PlantsTechnical Paper Publication. IMECE2018-88477Mohamed Gadalla, Adnan Alashkar, American University ofSharjah, Sharjah, United Arab Emir.

11:24am – Magnets for TommorowTechnical Presentation. IMECE2018-89047Anish B. Soman, Balendu Divakar, SCMS School ofEngineering and Technology, Ernakulam, Kerala, Kerala, India,Anoop Anilkumar, Soorya Nath K.U., SCMS School ofEngineering and Technology, Kerala, Kerala, India

TRACK 8 ENERGY – WEDNESDAY, NOVEMBER 14

103

8-12 FUEL CELL SYSTEMS DESIGN ANDAPPLICATIONS8-12-1 PEM Fuel Cells – IThird Floor, David L. Lawrence Convention Center, Room 324

10:00am–11:45am


10:00am – Investigation of Cell Reversal of PolymerElectrolyte Fuel Cells in Freezing ConditionsTechnical Presentation. IMECE2018-89394Leiming Hu, Carnegie Mellon University, Pittsburgh, PA, UnitedStates, Bo Ki Hong, Jong-Gil Oh, Hyundai Motor Company,Yongin-si, Gyeonggi-do, Korea (Republic), Shawn Litster,Carnegie Mellon University, Pittsburgh, PA, United States

10:21am – Electrode and Membrane Development for AnionExchange Membrane Fuel CellsTechnical Presentation. IMECE2018-89428Dylan Ritter, Leiming Hu, Megan Treichel, Tyler Womble,Kevin Noonan, Shawn Litster, Carnegie Mellon University,Pittsburgh, PA, United States

10:42am – Enhanced Water Management for PlatinumGroup Metal-Free Polymer Electrolyte Fuel Cells byEngineered Gas Diffusion LayersTechnical Presentation. IMECE2018-89565Lisa Langhorst, Aman Uddin, Carnegie Mellon University,Pittsburgh, PA, United States, Hanguang Zhang, Gang Wu,University at Buffalo, State University of New York, Buffalo, NY,United States, Shawn Litster, Carnegie Mellon University,Pittsburgh, PA, United States

11:03am – Structural Analysis of MEA Considering CatalystLayer MicrostructureTechnical Presentation. IMECE2018-87385Tomaru Ogawa, Norio Saito, Shinichi Takahashi, AtsushiOhma, Nissan Motor Co., Ltd., Yokosuka, Kanagawa, Japan

11:24am – Nonequilibrium Thermodynamics ExplainsThermal Osmosis in PEM Fuel CellsTechnical Presentation. IMECE2018-87853Nicholas Ingarra, Xia Wang, Oakland University, Rochester,MI, United States

8-7 THERMAL ENERGY STORAGE8-7-3 Thermal Energy Storage—Devices IIThird Floor, David L. Lawrence Convention Center, Room 323

1:45pm–3:30pm

Session Chair: Adriano Sciacovelli, University of Birmingham,Birmingham, United Kingdom

Session Co-Chair: Maike Johnson, German Aerospace Center(DLR), Stuttgart, Germany

1:45pm – Heat Transfer Analysis of a Low-TemperatureHeat Pipe-Assisted Latent Heat Thermal Energy StorageSystem With Nano-Enhanced PCMTechnical Paper Publication. IMECE2018-86609Mahboobe Mahdavi, Saeed Tiari, Vivek Pawar, GannonUniversity, Erie, PA, United States

2:06pm – Experimental and Numerical Study on Melting ofSolar Salt in a Finned Metallic ContainerTechnical Paper Publication. IMECE2018-88072Sol-Carolina Costa, Khamid Mahkamov, Murat Kenisarin,Mohammad Ismail, Northumbria University, Newcastle uponTyne, United Kingdom, Elvedin Halimic, David Mullen, KevinLynn, Thomas Werner, Aavid Thermacore Europe Ltd.,Ashington, United Kingdom

2:27pm – Layout of Phase Change Materials in a ThermalEnergy Storage SystemTechnical Paper Publication. IMECE2018-88636Habeeb Ur Rahman Khan, Taha Aldoss, MuhammadRahman, Wichita State University, Wichita, KS, United States

2:48pm – Numerical Investigation of Thermal Performancefor Plate Type PCM Thermal Storage UnitTechnical Paper Publication. IMECE2018-88667Chen Mengdong, Yang Cenyu, Jin Yi, Hu Xiao, GlobalEnergy Interconnection Research Institute, Beijing, China

8-9 ENERGY SYSTEMS FOR BUILDINGS8-9-2 Building Energy GenerationThird Floor, David L. Lawrence Convention Center, Room 319

1:45pm–3:30pm

Session Chair: Sayed M. Metwalli, Cairo University, Cairo,Egypt

1:45pm – Energy Demand, Efficiency Measures andEmbodied Energy in the Italian Residential SectorTechnical Paper Publication. IMECE2018-86400Sara Abd Alla, Vincenzo Bianco, Scarpa Federico, LucaTagliafico, University of Genoa, Genoa, Italy

2:06pm – Feasibility Analysis of Distributed GenerationSystem for Large University CampusTechnical Paper Publication. IMECE2018-86477Amy Allen, Moncef Krarti, University of Colorado BoulderBoulder, CO, United States


104

2:27pm – Evaluation of Optimal Designs for HybridRenewable Energy Systems Specific to ResidentialCommunities in Saudi ArabiaTechnical Paper Publication. IMECE2018-88090Ammar H.A. Dehwah, Moncef Krarti, University of ColoradoBoulder, Boulder, CO, United States

2:48pm – Potential Aggregate Effects of Net-Zero EnergyHomes (NZEHs) With Distributed Energy Generation on theU.S. Electrical GridTechnical Paper Publication. IMECE2018-88359Dongsu Kim, Heejin Cho, Rogelio Luck, Pedro Mago,Mississippi State University, Mississippi State, MS, UnitedStates

3:09pm – Towards Net-Zero Energy Buildings: A CaseStudy in Humid Subtropical ClimateTechnical Paper Publication. IMECE2018-88518Owen G. Betharte, Hamidreza Najafi, Troy Nguyen, FloridaInstitute of Technology, Melbourne, FL, United States

8-10 RENEWABLE ENERGY8-10-7 Biomass, Geothermal, and Small-ScaleGenerationThird Floor, David L. Lawrence Convention Center, Room 325

1:45pm–3:30pm


Session Co-Chair: Lea-Der Chen, Texas A&M University-Corpus Christi, Corpus Christi, TX, United States

1:45pm – Radiative Transport and Hydrodynamic Modelingof Microalgae Photosynthesis in Bio-Flow ReactorsTechnical Paper Publication. IMECE2018-87116Lea Der Chen, Texas A&M University - Corpus Christi, CorpusChristi, TX, United States

2:06pm – Hot Surface Ignition Properties of Jet-A/CanolaMethyl Ester Blends in a Constant Volume ChamberTechnical Paper Publication. IMECE2018-87544Bach Duong, University of Oklahoma, Norman, OK, UnitedStates, Ramkumar N. Parthasarathy, SubramanyaGollahalli, University of Oklahoma, Norman, OK, United States

2:27pm – Combustion Modelling of a 20 kW Pellet BoilerTechnical Paper Publication. IMECE2018-88063Joao Silva, University of Minho, Guimaraes, Portugal, LelisFraga, National University of East Timor, Dili, East Timor,Manuel Eduardo Ferreira, University of Minho, Guimaraes,Portugal, Sergio Chapela, Jacobo Porteiro, University ofVigo, Vigo, Spain, Senhorinha Teixeira, Jose Teixeira,University of Minho, Guimaraes, Portugal

2:48pm – Improvement in Compost Waste Heat RecoverySystem Using LDPE InsulationTechnical Paper Publication. IMECE2018-88597Nikhil Shrikant Mane, PVPIT, Budhgaon, Sangli, Maharashtra,India, Narayanrao Hargude, RIT Sakharale, BudhgaonMaharashtra, India, Manoj Yadav, PVPIT, Budhgaon, Sangli,Maharashtra, India, Avinash Patil, SBGI, Miraj, Sangali,Maharashtra, India, Mukund L. Harugade, PVPIT, Budhgaon,Sangli, Maharashtra, India

3:09pm – Exploration of Solar Hybridization and ThermalEnergy Storage to Enhance Geothermal Power Generationand DispatchabilityTechnical Presentation. IMECE2018-89596Guangdong Zhu, NREL, Englewood, CO, United States,Joshua Dominic McTigue, NREL, Golden, CO, United States,Kevin Kitz, Kitzworks, Boise, ID, United States, Greg Mungas,Hyperlight Energy, Riverside, CA, United States, Daniel Wendt,INL, Idaho Springs, ID, United States

8-12 FUEL CELL SYSTEMS DESIGN ANDAPPLICATIONS8-12-2 PEM Fuel Cells – IIThird Floor, David L. Lawrence Convention Center, Room 324

1:45pm–3:30pm

Session Chair: Partha Mukherjee, Purdue University, WestLafayette, IN, United States

1:45pm – Improving Thermal Performance of a PEMFC WithWavy Serpentine Flow Channels: A Parametric StudyTechnical Paper Publication. IMECE2018-86145Yuxin Jia, Hongbin Yan, Northwestern PolytechnicalUniversity, Xi’an, China, Bengt Sunden, Lund University, Lund,Sweden, Gongnan Xie, Northwestern Polytechnical University,Xi’an, China

2:06pm – Numerical Simulation of Droplet Emergence andGrowth From Gas Diffusion Layers (GDLs) in ProtonExchange Membrane (PEM) Fuel Cell Flow ChannelsTechnical Paper Publication. IMECE2018-86579Jingru Benner, Anthony Santamaria, Mehdi Mortazavi,Western New England University, Springfield, MA, UnitedStates

2:27pm – Modeling Three-Dimensional Complex Flow-Fields of Proton Exchange Membrane Fuel Cells With GasDensity Change in CathodeTechnical Paper Publication. IMECE2018-88388Jinyong Kim, Chao-Yang Wang, Pennsylvania StateUniversity, University Park, PA, United States


105

2:48pm – Catalyst-scale Simulation of Transport andReaction on 3D STEM-CT Images of Carbon-Supported PtCatalyst for Polymer Electrolyte Fuel CellsTechnical Presentation. IMECE2018-89664Shohei Ogawa, Carnegie Mellon University, Pittsburgh, PA,United States, Elliot Padgett, David A. Muller, CornellUniversity, Ithaca, NY, United States, Anusorn Kongkanand,General Motors Company, Fuel Cell Activities, Pontiac, MI,United States, Shawn Litster, Carnegie Mellon University,Pittsburgh, PA, United States

3:09pm – Optimization of Triple Phase Boundary Length inYSZ-Carbon-Nanotube CompositesTechnical Presentation. IMECE2018-86946Shiuan-Duo Chiang, Jordan Miller, Leila Ladani, Universityof Texas at Arlington, Arlington, TX, United States

8-7 THERMAL ENERGY STORAGE8-7-4 Thermal Energy Storage—Systems IntegrationThird Floor, David L. Lawrence Convention Center, Room 323

3:45pm–5:30pm

Session Chair: Peiwen Li, University of Arizona, Tucson, AZ,United States

3:45pm – Examining Ice Storage and Solar PV as aPotential Push Toward Sustainability for QatarTechnical Paper Publication. IMECE2018-86709Ibraheam Al-Aali, Vijay Modi, Columbia University, New York,NY, United States

4:06pm – Analysis of Phase Change Thermal StorageConfigurations for Minichannel-Based Solar CollectorsTechnical Paper Publication. IMECE2018-87837Sai Kiran Hota, Julio Perez, Gerardo Diaz, University ofCalifornia – Merced, Merced, CA, United States

4:27pm – Using Forecasted Daily Maximum Temperaturesto Control a Chiller Thermal Storage SystemTechnical Paper Publication. IMECE2018-88307Christopher Baldwin, Cynthia A. Cruickshank, CarletonUniversity, Ottawa, ON, Canada

4:48pm – Novel Thermochemical Heat Storage System forMedium Temperature RangeTechnical Presentation. IMECE2018-89845Arpit Dwivedi, Manjunath Rajagopal, University of Illinois atUrbana-Champaign, Urbana, IL, United States, SrirupaGanguly, B.K. Sharma, Kishore Rajagopalan, IllinoisSustainable Technology Center, Champaign, IL, United States,Sanjiv Sinha, University of Illinois at Urbana-Champaign,Urbana, IL, United States

8-9 ENERGY SYSTEMS FOR BUILDINGS8-9-3 Building Structure/Materials for LoadReductionThird Floor, David L. Lawrence Convention Center, Room 319

3:45pm–5:30pm

Session Chair: Hohyun Lee, Santa Clara University, SantaClara, CA, United States

3:45pm – Influence of Façade Area on ThermalPerformance of Building for Cooling PurposesTechnical Paper Publication. IMECE2018-86033Hamad Almutairi, Abdulrahman Almutairi, Jaber H.Almutairi, Public Authority for Applied Education and Training,Kuwait, Kuwait

4:06pm – Effect of Inlet Location on Ventilation FlowThrough a Room Fitted With Solar ChimneyTechnical Paper Publication. IMECE2018-87051Kashif Nazir, University of Technology Sydney, Ultimo, NSW,Australia, B. Phuoc Huynh, University of Technology Sydney,Broadway NSW, Australia

4:27pm – Wood–Concrete Composite for ThermallyInsulated Building Construction MaterialTechnical Paper Publication. IMECE2018-87340Anuj Gupta, Harishchandra Thakur, Gautam BuddhaUniversity, Gautam Budh Nagar, Uttar Pradesh, India

4:48pm – A Numerical Approach for the Evaluation of theEnergy Efficiency in Ventilated FaçadeTechnical Paper Publication. IMECE2018-87525Massimo Milani, Luca Montorsi, Matteo Venturelli,University of Modena and Reggio Emilia, Reggio Emilia, Italy

5:09pm – Thermal Behavior of Soils Under Tidal Effect: A Case Study in Guayaquil, EcuadorTechnical Paper Publication. IMECE2018-87738Daniel Moreira, Ruben Hidalgo-Leon, Escuela SuperiorPolitecnica del Litoral, Guayaquil, Ecuador, Jose Macias,Instituto Nacional de Eficiencia Energética y EnergíasRenovables INER, Guayaquil, Ecuador, Guillermo E. Soriano,ESPOL Polytechnic University, Guayaquil, Guayas, Ecuador

8-10 RENEWABLE ENERGY8-10-8 Feasibility and Techno-Economic Analysis ofRenewable Energy TechnologiesThird Floor, David L. Lawrence Convention Center, Room 325

3:45pm–5:30pm

Session Chair: Jose C. Pascoa, Universidade Da Beira Interior,Covilha 6200, Portugal

3:45pm – Disc Turbine for Energy HarvestingTechnical Paper Publication. IMECE2018-88143Jose C. Pascoa, Sílvio Cândido, Fernando Charrua-Santos,Antonio Espirito-Santo, Marco Canario, Universidade daBeira Interior, Covilhã, Portugal


106

4:06pm – How Solar and Storage Can Reduce CoincidentPeak Loads and Payments: A Case Study in Austin, TXTechnical Paper Publication. IMECE2018-86482Arkasama Bandyopadhyay, Joshua D. Rhodes, Julia P.Conger, Michael E. Webber, University of Texas at Austin,Austin, TX, United States

4:27pm – Annual Performance Investigation of FinnedDouble-Pass Solar Air Heater Installed in SudanTechnical Presentation. IMECE2018-89024Mohand H. Mohamed, Pennsylvania State UniversityHarrisburg, Harrisburg, PA, United States, Issam Abu-Mahfouz, Pennsylvania State University Harrisburg,Middletown, PA, United States

4:48pm – Deep Decarbonization of Total Global Energy:Hydrogen and Ammonia C-Free Fuels Versus Electricity asIntegrated CO2-Emission-Free Energy SystemsTechnical Presentation. IMECE2018-86187William Leighty, The Leighty Foundation, Juneau, AK, UnitedStates

5:09pm – Performance of a Greenhouse Equipped WithLight-Splitting Material and Desalination UnitTechnical Presentation. IMECE2018-89337Sina Jahangiri Mamouri, James Klausner, Michigan StateUniversity, East Lansing, MI, United States, Ronggui Yang,University of Colorado, Boulder, CO, United States, AndreBenard, Michigan State University, East Lansing, MI, UnitedStates

8-12 FUEL CELL SYSTEMS DESIGN ANDAPPLICATIONS8-12-3 Fuel Cell Systems and InfrastructureThird Floor, David L. Lawrence Convention Center, Room 324

3:45pm–5:30pm

Session Chair: George Nelson, University of Alabama inHuntsville, Huntsville, AL, United States

3:45pm – Dynamic Behavior of a Solid Oxide SteamElectrolyzer System Using Transient PhotovoltaicGenerated Power for Renewable Hydrogen ProductionTechnical Paper Publication. IMECE2018-86685Alireza Saeedmanesh, University of California, Irvine, Irvine,CA, United States, Paolo Colombo, Politecnico di Torino,Torino, Italy, Jack Brouwer, University of California, Irvine,Irvine, CA, United States

4:06pm – Resolving the Electrochemical Equations of aSolid Oxide Fuel Cell for Use in Transient Simulation andIntegration Into Cyber-Physical SystemsTechnical Paper Publication. IMECE2018-87770Jesus Arias, Comas Haynes, Aklilu Giorges, GeorgiaInstitute of Technology, Atlanta, GA, United States

4:27pm – Electrolyzer Exergy Analysis for an EnvironmentalControl and Life Support SystemTechnical Paper Publication. IMECE2018-88119Raymond Chow, University of Alabama in Huntsville,Huntsville, AL, United States, Jay Perry, NASA Marshall SpaceFlight Center, Huntsville, AL, United States, George Nelson,University of Alabama in Huntsville, Huntsville, AL, UnitedStates

4:48pm – Gaseous Fuel Leakage From Natural GasInfrastructureTechnical Paper Publication. IMECE2018-88271Nohora Hormaza Mejia, Jack Brouwer, National Fuel CellResearch Center/University of California, Irvine, Irvine, CA,United States

5:09pm – Assessments From an Expert ElicitationWorkshop on the Cost, Performance, and Market Viabilityof Solid Oxide Fuel CellsTechnical Presentation. IMECE2018-89895Michael Whiston, Inês Azevedo, Shawn Litster, ConstantineSamaras, Kate S. Whitefoot, Jay F. Whitacre, CarnegieMellon University, Pittsburgh, PA, United States


107

NOTES

108

9-11-1: Computational Modeling of Multiphase Flows

9-11-2: Experimental Characterization of Complex Multiphase Flows

9-11-3: Simulation of Multiphase Flows in Pumps and Complex Systems

9-11-4: Modeling of Slug Flows, Separators and Shocks

9-12-1: Multiphase Flow with Bio-Applications

9-13-1: Industrial Flows – I

9-13-2: Industrial Flows – II

9-13-3: Industrial Flows – III

9-14-1: Symposium on Wind Turbines Aerodynamics and Control

9-15-1: 18th International Symposium on Measurement and Modeling ofEnvironmental Flows

9-16-1: Fluid Measurements and Instrumentation – I

9-16-2: Fluid Measurements and Instrumentation – II

9-17-1: Fluids Engineering Plenary

9-17-2: Fluids Engineering Plenary II

9-18-1: Young Engineers Paper (YEP) Contest

9-2-1: Electric, Magnetic & Thermal Phenomena

9-3-1: Fluid Mechanics and Rheology of Nonlinear Materials and Complex Fluids – I

9-3-2: Fluid Mechanics and Rheology of Nonlinear Materials and Complex Fluids – II

9-3-3: Fluid Mechanics and Rheology of Nonlinear Materials and Complex Fluids – III

9-4-1: Fundamentals and Basic Research

9-4-2: Computational Methods in Fluid Mechanics

9-4-3: Fundamental Fluids Engineering and Applications

9-5-1: CFD Applications for Flow Optimization and Control – I

9-5-2: CFD Applications for Flow Optimization and Control – II

9-5-3: CFD Applications for Flow Optimization and Control – III

Track OrganizersMark Duignan, Savannah River National

Laboratory, United States Judith Bamberger, Pacific Northwest

National Laboratory, United States

Topic OrganizersDennis A. Siginer, Botswana International

University of Science and Technology &Universidad de Santiago de Chile

Boris Khusid, New Jersey Inst of Tech,United States

Mhamed Boutaous, Universite de Lyon,France

Sayavur Bakhtiyarov, New Mexico Instituteof Mining and Technology, United States

Wayne Strasser, Eastman Chemical Co,United States

Stefan aus der Wiesche, University ofApplied Sciences Muenster, Germany

Khaled J. Hammad, Central ConnecticutState University, United States

Jun Chen, Purdue University, United StatesZhongquan Charlie Zheng, University of

Kansas, United States Ning Zhang, McNeese State University,

United States Philipp Epple, Coburg University of Applied

Sciences, GermanyEmma Frosina, University of Naples, ItalyElia Merzari, Argonne National Laboratory,

United StatesSurya Vanka, University of Illinois, United

States S.A. Sherif, University of Florida, United

States Yu-Tai Lee, United States Javid Bayandor, State University of New

York, United StatesKhaled J. Hammad, Central Connecticut

State University, United StatesJingsen Ma, Dynaflow, Inc., United StatesMohammad Hossan, University of Central

Oklahoma, United StatesJacek Wrobel, poltechresearch.com,

United States Hongwei Sun, University of Massachusetts

Lowell, United StatesJoseph Katz, Johns Hopkins University,

United States

Tim O’Hern, Sandia National Laboratories,United States

Marianne Francois, Los Alamos NationalLaboratory, United States

Robert Kunz, Penn State University, UnitedStates

Jingsen Ma, Dynaflow, Inc., United StatesZhongquan Charlie Zheng, University of

Kansas, United States Ning Zhang, McNeese State University,

United StatesAlexandrina Untaroiu, Virginia Tech, United

StatesGeorge Chamoun, Eastman Kodak, United

States Ivaylo Nedyalkov, University of New

Hampshire, United States Nikhil Kumar Palakurthi, University of

Cincinnati, United States Lyes Khezzar, Khalifa University of Science

and Technology, United Arab Emir.Henry Foust, University of St. Thomas,

United States Kevin Anderson, California State Polytech

University, United StatesMajid Rashidi, Cleveland State University,

United States Jinkook Lee, Eaton, United States Jaikrishnan Kadambi, Case University,

United States Upendra Rohatgi, Brookhaven National

Laboratory, United StatesKashif Nawaz, Oak Ridge National

Laboratory | ORNL, United StatesStamatios Pothos, TSI Incorporated, United

States Martin Wosnik, University of New

Hamshire, United States Joel Park, Naval Surface Warfare Center

Carderock Division, United StatesJudith Bamberger, Pacific Northwest

National Laboratory, United StatesB. Terry Beck, Kansas State Univ, United

States D. Keith Walters, University of Oklahoma,

United States

Session OrganizersDennis A. Siginer, Botswana International

University of Science and Technology &Universidad de Santiago de Chile, Chile

Boris Khusid, New Jersey Inst of Tech,United States

Mhamed Boutaous, Universite de Lyon,France

John Buchanan, UNNPP, United StatesWayne Strasser, Eastman Chemical Co,

United StatesTaewoo Lee, Arizona State Univ, United

StatesZhongquan Charlie Zheng, University of

Kansas, United StatesNing Zhang, McNeese State University,

United StatesPhilipp Epple, Coburg University of Applied

Sciences, GermanyEmma Frosina, University of Naples, ItalySurya Vanka, University of Illinois, United

States Jae Sung Park, University of Nebraska-

Lincoln, United States Nazmul Islam, University of Texas

Rio Grande Valley, United StatesHongwei Sun, University of Massachusetts

Lowell, United StatesJacek Wrobel, poltechresearch.com,

United StatesMarianne Francois, Los Alamos National

Laboratory, United StatesRobert Kunz, Penn State University, United

States Alexandrina Untaroiu, Virginia Tech, United

States Kevin Anderson, California State Polytech

Univ, United StatesIvaylo Nedyalkov, University of New

Hampshire, United StatesNikhil Kumar Palakurthi, University of

Cincinnati, United StatesMajid Rashidi, Cleveland State University,

United StatesKashif Nawaz, Oak Ridge National

Laboratory | ORNL, United StatesStamatios Pothos, TSI Incorporated, United

States Ivaylo Nedyalkov, University of New

Hampshire, United States

TRACK 9 FLUIDS ENGINEERINGTUESDAY, NOVEMBER 13

9-17 FLUIDS ENGINEERING PLENARIES9-17-1 Fluids Engineering Plenary IThird Floor, David L. Lawrence Convention Center, Room 301

8:00am–8:45am

8:00am – Interface Actuations for Micro/Nano FluidicsPlenary Presentation. IMECE2018-90100Sung Kwon Cho, University of Pittsburgh, Pittsburgh, PA,United States

9-17 FLUIDS ENGINEERING PLENARIES9-17-2 Fluids Engineering Plenary IIThird Floor, David L. Lawrence Convention Center, Room 301

9:00am–9:45am

9:00am – Microfluidic Rheometry of Complex FluidsPlenary Presentation. IMECE2018-90101Gareth McKinley, Massachusetts Institute of Technology,Cambridge, MA, United States

9-3 25th SYMPOSIUM ON FLUIDMECHANICS AND RHEOLOGY OFNONLINEAR MATERIALS AND COMPLEXFLUIDS9-3-1 Fluid Mechanics and Rheology of NonlinearMaterials and Complex Fluids – IThird Floor, David L. Lawrence Convention Center, Room 319

10:00am–11:45am

Session Chair: Dennis A. Siginer, Botswana InternationalUniversity of Science and Technology & Universidad deSantiago de Chile, Santiago in Chile & Palapye in Botswana,Chile

Session Co-Chair: Mhamed Boutaous, Universite de Lyon,Villeurbanne, France

10:00am – Brownian Dynamics Simulations of AggregationPhenomena in a Magnetic Particle Suspension With anAlternating Magnetic Field (Relationship Between theAggregate Structure and the Heat Production)Technical Paper Publication. IMECE2018-86544Seiya Suzuki, Akira Satoh, Muneo Futamura, AkitaPrefectural University, Yuri-Honjo, Akita, Japan

10:21am – The Effect of Porous Support Layer in ForwardOsmosis Membranes: A Computational Fluid DynamicsSimulationTechnical Paper Publication. IMECE2018-86328Ahmed M. Alshwairekh, Abdullah A. Alghafis, Mustafa Usta,Anas Alwatban, Robert M. Krysko, Alparslan Oztekin,Lehigh University, Bethlehem, PA, United States

10:42am – 3D Modeling of the Thermal Phenomena DuringLaser Melting of PolymersTechnical Paper Publication. IMECE2018-87549Mhamed Boutaous, Universite de Lyon, Villeurbanne, France,Aoulaiche Mokrane, Shihe Xin, INSA de Lyon, Villeurbanne,France, Dennis A. Siginer, Botswana International Universityof Science and Technology & Universidad de Santiago deChile, Santiago in Chile & Palapye in Botswana, Chile

11:03am – Analysis of Melt Flows in an Electric HeatingFurnace for Quartz Glass SynthesisTechnical Paper Publication. IMECE2018-86112Qianli Ma, Haisheng Fang, Huazhong University of Science &Technology, Wuhan, Hubei, China, Chunli Shang, HubeiFeilihua Quartz Glass Co., Ltd., Jingzhou, Hubei, China,Zhongyi Liu, Jing Wang, Huazhong University of Science &Technology, Wuhan, Hubei, China

11:24am – 3D Monte Carlo Simulations on the PreferredConfiguration of Cubic Hematite Particles in the AggregateStructuresTechnical Presentation. IMECE2018-86635Kazuya Okada, Akira Satoh, Muneo Futamura, AkitaPrefectural University, Yuri-honjo, Akita, Japan

9-5 SYMPOSIUM ON CFD APPLICATIONSFOR OPTIMIZATION AND CONTROLS9-5-1 CFD Applications for Flow Optimization andControl – IThird Floor, David L. Lawrence Convention Center, Room 323

10:00am–11:45am

Session Chair: Zhongquan Charlie Zheng, University ofKansas, Lawrence, KS, United States

Session Co-Chairs: Ning Zhang, McNeese State University,Lake Charles, LA, United States, Philipp Epple, CoburgUniversity of Applied Sciences, Coburg, Bavaria, Germany

10:00am – Investigation of Three-Dimensional LagrangianCoherent Structures in Flow Past Single and Arrays ofPlate: Linear Energy Harvesting ApplicationsTechnical Paper Publication. IMECE2018-86332Bashar Attiya, I-Han Liu, Cosan Daskiran, MuhannadAltimemy, Alparslan Oztekin, Lehigh University, Bethlehem,PA, United States

10:21am – High Resolution Overset Structured Grid RANSSimulations of Flow Past a Surface Mounted Cube UsingEddy Viscosity Closure ModelsTechnical Paper Publication. IMECE2018-86480Marc Goldbach, University of North Carolina at Charlotte,Tega Cay, SC, United States, Mesbah Uddin, North CarolinaMotorsports and Automotive Research Center, Charlotte, NC,United States

TRACK 9 FLUIDS ENGINEERING – TUESDAY, NOVEMBER 13

109

10:42am – Method to Reduce Drag Coefficient for FuelEfficiency in Semi-Truck Trailer and Trailer StabilityTechnical Paper Publication. IMECE2018-86584Anu Nair, Fred Barez, San Jose State University, San Jose,CA, United States, Metin Ozen, Ozen Engineering, Inc., SanJose, CA, United States, Ernie Thurlow, San Jose StateUniversity, San Jose, CA, United States

11:03am – Effect of Underbody Geometry on the FuelEfficiency of Gasoline and Electric VehiclesTechnical Paper Publication. IMECE2018-86629Krishnaswamy Mahadevan, Fred Barez, DavoodAbdollahian, Ernie Thurlow, San Jose State University, SanJose, CA, United States

11:24am – CFD Simulation of Multiphase Flow inConcentric AnnuliTechnical Paper Publication. IMECE2018-86640Amina Shynybayeva, Luis Rojas-Solorzano, NazarbayevUniversity, Astana, Kazakhstan, Kristian J. Sveen, Institute forEnergy Technology, Kjeller, Norway

9-9 MICROFLUIDICS 2018—FLUIDENGINEERING IN MICRO- ANDNANOSYSTEMS9-9-1 Mathematical Modeling in MicrofluidicsThird Floor, David L. Lawrence Convention Center, Room 324

10:00am–11:45am

Session Chair: Jae Sung Park, University of Nebraska–Lincoln, Lincoln, NE, United States

Session Co-Chair: Nazmul Islam, University of Texas Rio Grande Valley, Edinburg, TX, United States

10:00am – Modelling on Predicting Pressure Distributionand Capacity of Foil Thrust BearingTechnical Paper Publication. IMECE2018-86085Zheng Xu, Fenzhu JI, Yu Zhou, Shuiting Ding, Fanyong Wu,Beihang University, Beijing, China

10:21am – Combined Magnetohydrodynamic/PressureDriven Flow of Multi-Layer Pseudoplastic Fluids Through aParallel Flat Plates MicrochannelTechnical Paper Publication. IMECE2018-86676Juan R. Gomez, Juan P. Escandon, Instituto PolitecnicoNacional, SEPI-ESIME Unidad Azcapotzalco, Cuidad deMéxico, Mexico

10:42am – Theoretical and Numerical Analysis of Mixing ofConfined NanodropletsTechnical Presentation. IMECE2018-87826Alireza Karbalaei, Hyoung Jin Cho, University of CentralFlorida, Orlando, FL, United States

11:03am – A Passive Stokes Flow Rectifier for NewtonianFluidsTechnical Presentation. IMECE2018-89658Aryan Mehboudi, Junghoon Yeom, Michigan State University,East Lansing, MI, United States

11:24am – Spray Performance of Alternative Jet Fuel BasedNanofuels at High-Ambient ConditionsTechnical Paper Publication. IMECE2018-87387Mohamed Soltan, Buthaina Al Abdulla, Al Reem Al-Dosari,Kumaran Kannaiyan, Texas A&M University at Qatar, Doha,Qatar, Reza Sadr, Texas A&M University, College Station, TX,United States

9-18 YOUNG ENGINEERS PAPER (YEP)CONTEST9-18-1 Young Engineers Paper (YEP) ContestThird Floor, David L. Lawrence Convention Center, Room 325

10:00am–11:45am

Session Chair: B. Terry Beck, Kansas State University,Manhattan, KS, United States

Session Co-Chair: D. Keith Walters, University of Oklahoma,Norman, OK, United States

10:00am – Downwind Two-Bladed Wind TurbineAerodynamic Performance Evaluation ImplementingActuator Line ModelTechnical Paper Publication. IMECE2018-86549Sebastian Henao, National University of Colombia, Marinilla,Antioquia, Colombia, Aldo G. Benavides, National Universityof Colombia, Medellín, Antioquia, Colombia, Omar D. López,Los Andes University, Bogota, Cundinamarca, Colombia

10:21am – The Effect of a Spanwise Body Force on Skin-Friction Reduction and Its Connections to Low-Drag Statesin Turbulent FlowTechnical Paper Publication. IMECE2018-86610Jae Sung Park, Thomas Hafner, University of Nebraska–Lincoln, Lincoln, NE, United States

10:42am – Pulsatory Mixing of Laminar Flow Using Bubble-Driven Micro-PumpsTechnical Paper Publication. IMECE2018-86937Brandon Hayes, Austin Hayes, Matthew Rolleston, James Krisher, Alexander Ferreira, Rochester Institute ofTechnology, Rochester, NY, United States

11:03am – The Impact of Adding a Labyrinth Surface to anOptimal Helical Seal DesignTechnical Paper Publication. IMECE2018-87089Wisher Paudel, Cori Watson, Houston G. Wood, University ofVirginia, Charlottesville, VA, United States

11:24am – Comparing Fish-Inspired Ram Filters forCollection of Harmful AlgaeTechnical Paper Publication. IMECE2018-88797Lauren Marshall, Adam Schroeder, Brian Trease, Universityof Toledo, Toledo, OH, United States


110

9-3 25th SYMPOSIUM ON FLUIDMECHANICS AND RHEOLOGY OFNONLINEAR MATERIALS AND COMPLEXFLUIDS9-3-2 Fluid Mechanics and Rheology of NonlinearMaterials and Complex Fluids – IIThird Floor, David L. Lawrence Convention Center, Room 319

1:45pm–3:30pm

Session Chair: Mhamed Boutaous, Universite de Lyon,Villeurbanne, France

Session Co-Chair: Dennis A. Siginer, Botswana InternationalUniversity of Science and Technology & Universidad deSantiago de Chile, Santiago in Chile & Palapye in Botswana,Chile

1:45pm – Numerical Modeling of Phan-Thien-TannerViscoelastic Fluid Flow Through a Square Cross-SectionDuct: Heat Transfer Enhancement due to Shear-ThinningEffectsTechnical Paper Publication. IMECE2018-87568Mhamed Boutaous, Universite de Lyon, Villeurbanne, France,Fouad Hagani, Shihe Xin, Ronnie Knikker, INSA de Lyon,Villeurbanne, France, Dennis A. Siginer, BotswanaInternational University of Science and Technology &Universidad de Santiago de Chile, Santiago in Chile & Palapyein Botswana, Chile

2:06pm – Resonance in Laminar Pipe Flow of Non-LinearViscoelastic FluidsTechnical Paper Publication. IMECE2018-87973Mario Letelier, University of Santiago of Chile, Santiago, Chile, Dennis A. Siginer, Botswana International University of Science and Technology & Universidad de Santiago deChile, Santiago in Chile & Palapye in Botswana, Chile, Diego Almendra, Juan Stockle, Universidad de Santiago de Chile, Santiago, Chile

2:27pm – Rheology of Non-Dilute Suspensions ofDeformable Particles in Newtonian Solvents Under LargeAmplitude Oscillatory Shear (LAOS)Technical Presentation. IMECE2018-89194Christoph Kammer, Pedro Ponte Castañeda, University ofPennsylvania, Philadelphia, PA, United States

2:48pm – Rheological Characteristics of Surfactant-BasedFluids: A Comprehensive StudyTechnical Paper Publication. IMECE2018-86044Ahmed Kamel, University of Texas of the Permian Basin,Odessa, TX, United States

3:09pm – Study on the Numerical Analysis of In-Line TypeSubsea Separator for Liquid-Liquid Mixture FlowTechnical Paper Publication. IMECE2018-87301Young Ju Kim, Namsub Woo, Hyunji Kim, Sangmok Han,Jiho Ha, Korea Institute of Geoscience and Mineral Resources,Pohang, Gyeongsangbuk-do, Korea (Republic), Sunchul Huh,Gyeongsang National University, Tongyeong-si,Gyeongsangnam-do, Korea (Republic)

9-5 SYMPOSIUM ON CFD APPLICATIONSFOR OPTIMIZATION AND CONTROLS9-5-2 CFD Applications for Flow Optimization andControl – IIThird Floor, David L. Lawrence Convention Center, Room 323

1:45pm–3:30pm



1:45pm – Optimization of Curved Spacer Prototype Designfor Flow Improvement in Centrifugal Pump ImpellerTechnical Paper Publication. IMECE2018-87075Munther Hermez, Lawrence Technological University,Southfield, MI, United States, Badih Jawad, LawrenceTechnological University, Dearborn Heights, MI, United States,Liping Liu, Sabah Abro, Lawrence Technological University,Southfield, MI, United States

2:06pm – Influence of Blade Shape Geometry on Very LowSpecific Speed Centrifugal Pump PerformanceTechnical Paper Publication. IMECE2018-87119Muhamed Elsayed Albadawi, Ihab Adam, Sherif Haddara,Ahmed Elsherif, Alexandria University, Alexandria, Egypt

2:27pm – Efficiency Variation on a 4-Stage Low SpeedResearch Compressor With a Redesigned CantileveredStatorTechnical Paper Publication. IMECE2018-87166Zhenzhou Ju, Jinfang Teng, Shanghai Jiao Tong University,Shanghai, China, Lin Fan, Yongjian Zhong, AECC CommercialAircraft Engine Company, Shanghai, China, Xiao-Qing Qiang,Shanghai Jiao Tong University, Shanghai, China

2:48pm – Surrogate Model Based Optimization for ChevronFoil Thrust BearingTechnical Presentation. IMECE2018-87778Gen Fu, Alexandrina Untaroiu, Virginia Tech, Blacksburg, VA,United States

3:09pm – Comparison of Experimental,Thermoelastohydrodynamic (TEHD) and Thermal, Non-Deforming Computational Fluid Dynamics (CFD) Results forThrust Bearings: Part IITechnical Paper Publication. IMECE2018-87798Xin Deng, Cori Watson, Minhui He, Houston G. Wood,Roger Fittro, University of Virginia, Charlottesville, VA, UnitedStates


111

9-9 MICROFLUIDICS 2018—FLUIDENGINEERING IN MICRO- ANDNANOSYSTEMS9-9-2 Droplet MicrofluidicsThird Floor, David L. Lawrence Convention Center, Room 324

1:45pm–3:30pm

Session Chair: Hongwei Sun, University of MassachusettsLowell, Lowell, MA, United States

1:45pm – Experimental Investigation on Newtonian DropFormation in Different Continuous Phase FluidsTechnical Paper Publication. IMECE2018-86602Ashkan Nazari, Virginia Tech, Blacksburg, VA, United States,Arash Nazari, K.N. Toosi University of Technology, Tehran, Iran

2:06pm – Droplet Mixing Based on ThermotaxisTechnical Presentation. IMECE2018-87730Alireza Karbalaei, Ranganathan Kumar, Hyoung Jin Cho,University of Central Florida, Orlando, FL, United States

2:27pm – Forced Wetting of Liquids Using UltrasonicSurface VibrationTechnical Paper Publication. IMECE2018-87832Matthew Trapuzzano, Nathan Crane, Rasim Guldiken,Andres Tejada-Martinez, University of South Florida, Tampa,FL, United States

2:48pm – Preliminary Investigation of the Effect ofDielectrophoresis on Colloidal Transport and Deposition inEvaporating DropletsTechnical Paper Publication. IMECE2018-88054Xi Li, Kara L. Maki, Michael Schertzer, Rochester Institute ofTechnology, Rochester, NY, United States

3:09pm – Study of Gas-Liquid Droplet Microfluidics inConfined Flow Focusing Geometries for Enhanced DropletGenerationTechnical Presentation. IMECE2018-89904Pooyan Tirandazi, Julian D. Arroyo, Dac Duc Ho, Carlos H.Hidrovo, Northeastern University, Boston, MA, United States

9-11 14th FORUM ON RECENTDEVELOPMENTS IN MULTIPHASE FLOW9-11-1 Computational Modeling of Multiphase FlowsThird Floor, David L. Lawrence Convention Center, Room 325

1:45pm–3:30pm

Session Chair: Joseph Katz, Johns Hopkins University,Baltimore, MD, United States

Session Co-Chair: Marianne Francois, Los Alamos NationalLaboratory, Los Alamos, NM, United States

1:45pm – An Accurate Unstructured Finite Volume DiscreteBoltzmann MethodTechnical Paper Publication. IMECE2018-87136Leitao Chen, Laura Schaefer, Rice University, Houston, TX,United States, Xiaofeng Cai, University of Delaware, Newark,DE, United States

2:06pm – A Hyperbolicity Analysis of the 1991 OLGA’sModel for Isothermal FlowTechnical Paper Publication. IMECE2018-87513Carina N. Sondermann, Raphael V. Freitas, RodrigoPatricio, Aline B. Figueiredo, Gustavo C.R. Bodstein,Federal University of Rio de Janeiro, Rio de Janeiro, Brazil,Felipe B. De F. Rachid, Fluminense Federal University(PGMEC/UFF), Rio de Janeiro, Brazil, Renan MartinsBaptista, Petrobras, Rio de Janeiro, Brazil

2:27pm – Numerical Study of Two-Phase Flow in aHorizontal Pipeline Using an Unconditionally HyperbolicTwo-Fluid ModelTechnical Paper Publication. IMECE2018-87571Raphael V. Freitas, Carina N. Sondermann, RodrigoPatricio, Aline B. Figueiredo, Gustavo C.R. Bodstein,Federal University of Rio de Janeiro, Rio de Janeiro, Brazil,Felipe B. De F. Rachid, Fluminense Federal University(PGMEC/UFF), Rio de Janeiro, Brazil, Renan MartinsBaptista, Petrobras, Rio de Janeiro, Brazil

2:48pm – Interfacial Mobility Calculations From RandomAtomistic WalksTechnical Presentation. IMECE2018-87957Paul Barclay, Jennifer Lukes, University of Pennsylvania,Philadelphia, PA, United States

3:09pm – Investigation of Power-Law Shear Thinning FluidWicking in Capillary Channels by Two-Phase DirectNumerical Simulation With Volume-of-Fluid (VOF) MethodTechnical Presentation. IMECE2018-89580An Fu, Nikhil Kumar Palakurthi, University of Cincinnati,Cincinnati, OH, United States, James Comer, The Procter &Gamble Company, Cincinnati, OH, United States, Milind Jog,University of Cincinnati, Cincinnati, OH, United States

9-3 25th SYMPOSIUM ON FLUIDMECHANICS AND RHEOLOGY OFNONLINEAR MATERIALS AND COMPLEXFLUIDS9-3-3 Fluid Mechanics and Rheology of NonlinearMaterials and Complex Fluids – IIIThird Floor, David L. Lawrence Convention Center, Room 319

3:45pm–5:30pm

Session Chair: Mhamed Boutaous, Universite de Lyon,Villeurbanne, France

Session Co-Chair: Dennis A. Siginer, Botswana InternationalUniversity of Science and Technology & Universidad deSantiago de Chile, Santiago in Chile & Palapye in Botswana,Chile

3:45pm – The Flow Structure of Annular Yield-Pseudoplastic Non-Newtonian JetsTechnical Presentation. IMECE2018-89383Khaled J. Hammad, Central Connecticut State UniversitySimsbury, CT, United States


112

4:06pm – The Effect of the Fluid Film Variable Viscosity onthe Hydrostatic Thrust Spherical Bearing Performance inthe Presence of Centripetal Inertia and Surface Roughness:Part 2—Recessed Fitted BearingTechnical Paper Publication. IMECE2018-86029Ahmad W.Y. Elescandarany, Alex University, Alexandria,Egypt

4:27pm – Herschel-Bulkley Fluid Flow Characteristics in aDuct With an ObstacleTechnical Paper Publication. IMECE2018-87092Nariman Ashrafi, IAU, Tehran, Iran, Ali Sadeghi, ArminChegini, SRBIAU, Tehran, Iran, Mehdi Shafahi, IAU, Tehran,Iran

4:48pm – Mixing Enhancement in a Novel Type of “Split andRecombine” Static MixerTechnical Paper Publication. IMECE2018-88030Charbel Habchi, Notre Dame University - Louaize, ZoukMosbeh, Lebanon, Thierry Lemenand, University of Angers,Angers, France, Fouad Azizi, American University of Beirut,Beirut, Lebanon

5:09pm – Viscoplastic Fluid Flow Between Parallel PlatesWith Triangular ObstaclesTechnical Paper Publication. IMECE2018-87105Nariman Ashrafi, IAU, Tehran, Iran, Ali Sadeghi, ArminChegini, SRBIAU, Tehran, Iran

9-5 SYMPOSIUM ON CFD APPLICATIONSFOR OPTIMIZATION AND CONTROLS9-5-3 CFD Applications for Flow Optimization andControl – IIIThird Floor, David L. Lawrence Convention Center, Room 323

3:45pm–5:30pm



3:45pm – LES and Hybrid RANS-LES Simulation of aPulsating Channel FlowTechnical Paper Publication. IMECE2018-87990Tausif Jamal, University of Oklahoma, Norman, OK, UnitedStates, Huiyu Wang, University of Oklahoma, Norman, OK,United States, D. Keith Walters, University of Oklahoma,Norman, OK, United States

4:06pm – Transient Analysis of Air Flow in a Channel forUnconventional RadiatorTechnical Paper Publication. IMECE2018-88327Wahidul Islam, Jobaidur Khan, University at Buffalo, StateUniversity of New York, Buffalo, NY, United States

4:27pm – On Fine Tuning the SST K - ω Turbulence ModelClosure Coefficients for Improved Prediction of AutomotiveExternal FlowsTechnical Paper Publication. IMECE2018-88328Chunhui Zhang, University of North Carolina at Charlotte,Charlotte, NC, United States, Mesbah Uddin, North CarolinaMotorsports and Automotive Research Center, Charlotte, NC,United States, Christian Selent, University of North Carolina atCharlotte, Charlotte, NC, United States

4:48pm – Experimental Analysis of Air Flow in a Channel forUnconventional RadiatorTechnical Paper Publication. IMECE2018-88332Saad Salman, Rishabh Sharma, Kanishk Suri, ZeshanKhetani, Muhammad Taha Junaidy, Jonatan Meza,Jobaidur Khan, University at Buffalo, State University of NewYork, Buffalo, NY, United States

5:09pm – Effects of Double Noise Barriers on HighwayPollutant Dispersion Under Various Atmospheric BoundaryConditionsTechnical Presentation. IMECE2018-88444Liyuan Gong, Xiuling Wang, Purdue University Northwest,Hammond, IN, United States

9-9 MICROFLUIDICS 2018—FLUIDENGINEERING IN MICRO- ANDNANOSYSTEMS9-9-3 Fundamentals and Applications ofMicrofluidicsThird Floor, David L. Lawrence Convention Center, Room 324

3:45pm–5:30pm

Session Chair: Nazmul Islam, University of Texas Rio GrandeValley, Edinburg, TX, United States

Session Co-Chair: Jacek Wrobel, Poltechresearch.com, GreatFalls, VA, United States

3:45pm – Transition From Planar Stratified Flow inConverging MicrochannelsTechnical Paper Publication. IMECE2018-86289Zachary Lamberty, Minseo Park, Nelson Macken,Swarthmore College, Swarthmore, PA, United States,Adam Melvin, Louisiana State University, Baton Rouge, LA,United States

4:06pm – Experimental Study of the Suspension Flow PastConfined Low-Aspect-Ratio Cylinder ArrangedMicrochannelsTechnical Paper Publication. IMECE2018-86980Xiao Cheng, Zhenhai Pan, Huiying Wu, Shanghai Jiao TongUniversity, Shanghai, China

4:27pm – Degradation of Hydrophobic Surface CoatingsUnder Water ExposureTechnical Paper Publication. IMECE2018-87860Matthew Trapuzzano, Rasim Guldiken, Andres Tejada-Martinez, Nathan Crane, University of South Florida, TFL, United States


113

4:48pm – A Quick and Easy Fabrication Method forMicrofluidics Using Solid Ink PrintingTechnical Presentation. IMECE2018-89139Sara Hopper, Endicott College, Beverly, MA, United States,Haipeng Zhang, Sangjin Ryu, University of Nebraska–Lincoln,Lincoln, NE, United States

5:09pm – Micropattern-Controlled Wicking Enhancement inHierarchical Micro-/NanostructuresTechnical Presentation. IMECE2018-89192Arif Rokoni, Dong-Ook Kim, Ying Sun, Drexel University,Philadelphia, PA, United States

9-11 14th FORUM ON RECENTDEVELOPMENTS IN MULTIPHASE FLOW9-11-2 Experimental Characterization of ComplexMultiphase FlowsThird Floor, David L. Lawrence Convention Center, Room 325

3:45pm–5:30pm

Session Chair: Marianne Francois, Los Alamos NationalLaboratory, Los Alamos, NM, United States

Session Co-Chair: Mark R Duignan, Savannah River NationalLaboratory, Aiken, SC, United States

3:45pm – Parametric Study and Improvement of PhaseSeparation in Intermediate Headers of MicrochannelCondensersTechnical Paper Publication. IMECE2018-88438Jun Li, Pega Hrnjak, University of Illinois at Urbana-Champaign, Urbana, IL, United States

4:06pm – Experimental Study of Chamber Volume Effect onBubble Formation From Orifice Plates Submerged in WaterTechnical Paper Publication. IMECE2018-87652Omkar Gokhale, Milind Jog, Raj M. Manglik, University ofCincinnati, Cincinnati, OH, United States

4:27pm – Using Experimental Fluid Dynamics andComputational Fluid Dynamics for Evaluating PeriodicMixingTechnical Paper Publication. IMECE2018-88531Judith Bamberger, Leonard Pease, Kurtis Recknagle, Carl Enderlin, Michael Minette, Pacific Northwest NationalLaboratory, Richland, WA, United States

4:48pm – Experimental Analysis of Two Phase Flow in aQuasi-Homogeneous Porous Inclined Hele-Shaw CellTechnical Presentation. IMECE2018-88633Luis Luviano-Ortiz, University of Guanajuato,Salamanca/Guanajuato, Guanajuato, Mexico, GustavoGuerrero-Arellano, University of Guanajuato, Santa Cruz deJuventino Rosas, Guanajuato, Mexico, Nubia Sanchez,University of Guanajuato, Salamanca, Guanajuato, Mexico,Eduardo Ramos, Universidad Nacional Autónoma de México,Temixco, Morelos, Mexico, Abel Hernandez-Guerrero,University of Guanajuato, Salamanca, Guanajuato, Guanajuato,Mexico

5:09pm – Understanding Transport of Microgels Through aConstrictive ChannelTechnical Presentation. IMECE2018-89990Shuaijun Li, Florian Crepin, Alimohammad Anbari, Jing Fan,City College of New York, New York, NY, United States


114


9-5 SYMPOSIUM ON CFD APPLICATIONSFOR OPTIMIZATION AND CONTROLS9-5-4 CFD Applications for Flow Optimization andControl – IVThird Floor, David L. Lawrence Convention Center, Room 326

10:00am–11:45am



10:00am – Numerical Analysis of Breakwaters TurbulenceUnder Coastal Wave ActionsTechnical Paper Publication. IMECE2018-88613Huanrong Ouyang, Joshua Hantz, Tam Nguyen, McNeese State University, Lake Charles, LA, United States,Amy Harrington, McNeese State University, Winnie, TX,United States, Ning Zhang, McNeese State University, LakeCharles, LA, United States

10:21am – New Design Method for Spiral CasingsConsidering the Properties of the Impeller and SpiralCasing at Design and Off-Design Conditions and NumericalVerification With CFDTechnical Paper Publication. IMECE2018-88673Philipp Epple, Manuel Fritsche, Michael Steppert, MichaelSteber, Coburg University of Applied Sciences, Coburg,Bavaria, Germany

10:42am – The Impact of the Gas Temperature and of theRelative Humidity on the Performance of Fans Operating inDrying PlantsTechnical Paper Publication. IMECE2018-88674Manuel Fritsche, Philipp Epple, Coburg University of AppliedSciences, Coburg, Bavaria, Germany, Antonio Delgado,Friedrich-Alexander University of Erlangen-Nuernberg,Erlangen, Germany

11:03am – Numerical Investigation to the Influence ofUpstream Components on the Pressure Fluctuation in DraftTube of Francis TurbineTechnical Presentation. IMECE2018-88818Wen-Tao Su, Harbin Institute of Technology, Harbin,Heilongjiang, China, You-Ning Xu, Shenyang Institute ofEngineering, Shenyang, Liaoning, China

9-11 14th FORUM ON RECENTDEVELOPMENTS IN MULTIPHASE FLOW9-11-3 Simulation of Multiphase Flows in Pumps andComplex SystemsThird Floor, David L. Lawrence Convention Center, Room 327

10:00am–11:45am

Session Chair: Robert Kunz, Pennsylvania State University,University Park, PA, United States

Session Co-Chair: Joseph Katz, Johns Hopkins University,Baltimore, MD, United States

10:00am – Large Eddy Simulation of Ventilated Pump-Turbine for Wastewater TreatmentTechnical Paper Publication. IMECE2018-86330Cosan Daskiran, Bashar Attiya, Muhannad Altimemy, I-HanLiu, Alparslan Oztekin, Lehigh University, Bethlehem, PA,United States

10:21am – A Reduced-Order Model for Predicting thePerformance of a Liquid-Ring Vacuum PumpTechnical Paper Publication. IMECE2018-86710Irsha Pardeshi, Ashutosh Pandey, Tom Shih, PurdueUniversity, West Lafayette, IN, United States

10:42am – Effect of Particle Parameters on Erosion Wearand Performance of Screw Centrifugal PumpTechnical Paper Publication. IMECE2018-88586Zhengjing Shen, Wuli Chu, Northwestern PolytechnicalUniversity, Xi’an, China

11:03am – Numerical and Experimental Investigation of theManufacturing Process of Ball Bearings Focusing onEnhancing the Aesthetics of the Outer SurfaceTechnical Presentation. IMECE2018-89614Abdullah Alsairafi, Stefan Moldovan, Youngstown StateUniversity, Youngstown, OH, United States

9-13 27th SYMPOSIUM ON INDUSTRIALFLOWS9-13-1 Industrial Flows – IThird Floor, David L. Lawrence Convention Center, Room 321

10:00am–11:45am

Session Chair: Alexandrina Untaroiu, Virginia Tech,Blacksburg, VA, United States

Session Co-Chairs: George Chamoun, Eastman Kodak, Gray,TN, United States, Kevin Anderson, California State PolytechUniversity, Pomona, CA, United States

10:00am – Full Scale Testing of Pulse Jet Mixer OperatingControlTechnical Paper Publication. IMECE2018-87866Leolein Moualeu, Aaron Wand, Klemme Herman, MichaelaTrenidad, Bethany Springer, Michael Hall, Bechtel NationalInc., Richland, WA, United States, Nathan McAdams, BechtelNational Inc., Reston, VA, United States, Langdon Holton,U.S. Department of Ener

TRACK 9 FLUIDS ENGINEERING – WEDNESDAY, NOVEMBER 14

115

10:42am – Numerical Investigations of a Rotating Wire-Wrapped CylinderTechnical Paper Publication. IMECE2018-86672Assma Begum, Komal Gada, Hamid Rahai, California StateUniversity-Long Beach, Long Beach, CA, United States

11:03am – The Effect of PTFE Membrane Properties onVacuum Membrane Distillation Module PerformanceTechnical Paper Publication. IMECE2018-86327Mustafa Usta, Robert M. Krysko, Ali E. Anqi, Ahmed M.Alshwairekh, Alparslan Oztekin, Lehigh University,Bethlehem, PA, United States

11:24am – Assessment of Different Turbulence Models onSimulations of Confined Jets in a Crossflow at SupercriticalPressureTechnical Paper Publication. IMECE2018-87894Saeid Janani, Komal Gada, Hamid Rahai, California StateUniversity-Long Beach, Long Beach, CA, United States,Farhad Davoudzadeh, Air Force Research Laboratory,Lancaster, CA, United States

9-8 KIRTI (KARMAN) GHIA CELEBRATIONOF LIFE SYMPOSIUM9-8-1 Kirti Ghia Celebration of Life – IThird Floor, David L. Lawrence Convention Center, Room 326

1:45pm–3:30pm

Session Chair: Surya Vanka, University of Illinois, Champaign,IL, United States

Session Co-Chair: S.A. Sherif, University of Florida,Gainesville, FL, United States

1:45pm – Flow in Driven Cavities: Building on KarmanGhia’s LegacyTechnical Presentation. IMECE2018-89029Surya Vanka, University of Illinois, Champaign, IL, UnitedStates

2:06pm – In Memory of Prof. Kirti Ghia: A Tribute to Life-Long Learning and EvolutionTechnical Presentation. IMECE2018-90010Ameer G., Department of Homeland Security, Arlington, VA,United States

2:27pm – LOW-Emission Combustion Research at NASAGlennTechnical Presentation. IMECE2018-89025Dhanireddy Reddy, NASA Glenn Research Center, Cleveland,OH, United States

2:48pm – GlennICE: A Next Generation Computational IceAccretion SolverTechnical Presentation. IMECE2018-89142Christopher Porter, NASA Glenn Research Center, Cleveland,OH, United States

9-11 14th FORUM ON RECENTDEVELOPMENTS IN MULTIPHASE FLOW9-11-4 Modeling of Slug Flows, Separators, andShocksThird Floor, David L. Lawrence Convention Center, Room 327

1:45pm–3:30pm

Session Chair: Mark R. Duignan, Savannah River NationalLaboratory, Aiken, SC, United States

Session Co-Chair: Robert Kunz, Pennsylvania StateUniversity, University Park, PA, United States

1:45pm – The Investigation of the Kinetic Energy of Slug ina Horizontal Channel Using VOF MethodTechnical Paper Publication. IMECE2018-87108Nariman Ashrafi, IAU, Tehran, Iran, Mohammad Reza Ansari,Tarbiat Modares University, Tehran, Iran, Armin Chegini, AliSadeghi, SRBIAU, Tehran, Iran

2:06pm – Analysis of Two-Phase Flow Slug Regime WithEngineering ApproachTechnical Paper Publication. IMECE2018-87118Nariman Ashrafi, IAU, Tehran, Iran, Armin Chegini, AliSadeghi, SRBIAU, Tehran, Iran

2:27pm – Mechanistic Modeling of Dynamic Zero-NetLiquid Holdup (ZNLH) in Gas-Liquid Cylindrical Cyclone(GLCC©) SeparatorTechnical Paper Publication. IMECE2018-88481Srinivas Swaroop Kolla, Megharaj Praneeth Karpurapu,Ram Mohan, Ovadia Shoham, University of Tulsa, Tulsa, OK,United States

2:48pm – On the Aspects of a Convergent Shock WaveImpinging a Perturbed Density InterfaceTechnical Paper Publication. IMECE2018-88098Erik Proano, Bertrand Rollin, Dongeun Seo, Embry-RiddleAeronautical University, Daytona Beach, FL, United States

9-13 27th SYMPOSIUM ON INDUSTRIALFLOWS9-13-2 Industrial Flows – IIThird Floor, David L. Lawrence Convention Center, Room 321

1:45pm–3:30pm

Session Chair: Kevin Anderson, California State PolytechUniversity, Pomona, CA, United States

Session Co-Chairs: Alexandrina Untaroiu, Virginia Tech,Blacksburg, VA, United States, Ivaylo Nedyalkov, University of New Hampshire, Durham, NH, United States

1:45pm – Pressure Fluctuation Mitigation in a FrancisTurbine With Water Injection: Computational StudyTechnical Paper Publication. IMECE2018-86333Muhannad Altimemy, Cosan Daskiran, Bashar Attiya,I-Han Liu, Alparslan Oztekin, Lehigh UniversityPA, United States


116

2:06pm – Development of the Pneumatic Non-ContactHolderTechnical Paper Publication. IMECE2018-86618Tetsuhiro Tsukiji, Sophia University, Tokyo, Japan, RyosukeKondo, Sophia University, Tokorozawa-shi, Saitama, Japan

2:27pm – Experimental Characterization of Particle-LadenAir Flow Across Horizontal Pipe JunctionsTechnical Paper Publication. IMECE2018-87833Tariq Khan, Mohamed Alshehhi, The Petroleum Institute, AbuDhabi, Abu Dhabi, United Arab Emir., Xu Rumin, KhalifaUniversity of Science and Technology, Abu Dhabi, Abu Dhabi,United Arab Emir., Saqib Salam, The Petroleum Institute, AbuDhabi, Abu Dhabi, United Arab Emir

2:48pm – Numerical Analysis on the Hydraulic Performanceof the Auxiliary Impeller in Large Capacity Canned-MotorPumpTechnical Paper Publication. IMECE2018-87285Shengde Wang, Zhenqiang Yao, Hong Shen, Guohu Luo,Shanghai Jiao Tong University, Shanghai, China

3:09pm – An Assessment of Health Hazards in Valves forGaseous Oxygen Service: Sources and PreventiveMeasuresTechnical Paper Publication. IMECE2018-86018Anil Kumar, Independent Author, Pune, India, Younus Sheikh,Army Institute of Technology, Savitribai Phule Pune University,Pune, India

9-6 PANEL: CFD/EFD CHOICE? —A DILEMMA FOR INDUSTRIES9-6-1 Computational or Experimental FluidDynamics?—A Dilemma for IndustriesThird Floor, David L. Lawrence Convention Center, Room 327

3:45pm–5:30pm

Session Chair: Philipp Epple, Coburg University of AppliedSciences, Coburg, Bavaria, Germany

Session Co-Chair: Emma Frosina, University of Naples,Naples, Italy

3:45pm – CFD and EFD in the Design Process of Fans andBlowersPanel Presentation. IMECE2018-88829Philipp Epple, Coburg University of Applied Sciences, Coburg,Bavaria, Germany

4:06pm – How Do You Know It’s Accurate? An Insider’sGuide to CFD Validation and VerificationPanel Presentation. IMECE2018-88844William Kulp, ANSYS, Canonsburg, PA, United States

4:27pm – Prediction of Both Aeration and Cavitation inAxial Piston Pumps Using a 3D-CFD Numerical ApproachPanel Presentation. IMECE2018-88969Emma Frosina, University of Naples, Naples, Italy

4:48pm – Evaluating Periodic Mixing With Experimental andComputational Fluid DynamicsPanel Presentation. IMECE2018-89407Judith Bamberger, Pacific Northwest National Laboratory,Richland, WA, United States

9-8 KIRTI (KARMAN) GHIA CELEBRATIONOF LIFE SYMPOSIUM9-8-2 Kirti Ghia Celebration of Life – IIThird Floor, David L. Lawrence Convention Center, Room 326

3:45pm–5:30pm

Session Chair: Surya Vanka, University of Illinois, Champaign,IL, United States

Session Co-Chair: Mark R. Duignan, Savannah River NationalLaboratory, Aiken, SC, United States

3:45pm – CFD for the Development of Bio-InspiredUnmanned VehiclesTechnical Presentation. IMECE2018-88982Ravi Ramamurti, Jason Geder, Naval Research Laboratory,Washington, DC, United States

4:06pm – Flow and Heat Transfer Past Turbine AirfoilsTechnical Presentation. IMECE2018-89591Sumanta Acharya, Yousef Kanani, Illinois Institute ofTechnology, Chicago, IL, United States

4:27pm – Multiphase Boundary Layer Models for AircraftIcing SimulationTechnical Presentation. IMECE2018-89605Alric Rothmayer, Iowa State University, Ames, IA, UnitedStates

4:48pm – Automated Hybrid Volume Mesh Generation WithAdaptive Surface/Volume RefinementTechnical Presentation. IMECE2018-89624John Steinbrenner, Steve Karman, Jr., Nick Wyman,Pointwise, Inc., Fort Worth, TX, United States

5:09pm – Utilization of The StreamVane for Boundary LayerIngestion TestingTechnical Presentation. IMECE2018-89753Mark Celestina, Julia Stephens, NASA Glenn ResearchCenter, Cleveland, OH, United States


117

9-13 27th SYMPOSIUM ON INDUSTRIALFLOWS9-13-3 Industrial Flows – IIIThird Floor, David L. Lawrence Convention Center, Room 321

3:45pm–5:30pm

Session Chair: George Chamoun, Eastman Kodak, Gray, TN,United States

Session Co-Chairs: Kevin Anderson, California State PolytechUniversity, Pomona, CA, United States, Nikhil KumarPalakurthi, University of Cincinnati, Cincinnati, OH, UnitedStates

3:45pm – Analyzing the Flow in Annular Gap With aRestrictor Mounted on Outer CylinderTechnical Paper Publication. IMECE2018-87207Guohu Luo, Zhenqiang Yao, Hong Shen, Shengde Wang,Shanghai Jiao Tong University, Shanghai, China

4:06pm – Bench Scale Experimental Study of Slug FlowPhenomena Using PID ControlTechnical Paper Publication. IMECE2018-88564Derek Staal, Daniel Schmidt, Jeffery McClung, Mark Behl,Mayank Tyagi, Louisiana State University, Baton Rouge, LA,United States

4:27pm – Pilot Scale Experimental Study of Slug FlowPhenomena Using PID ControlTechnical Paper Publication. IMECE2018-88565Daniel Schmidt, Jeffery McClung, Mark Behl, Derek Staal,Mayank Tyagi, Louisiana State University, Baton Rouge, LA,United States

4:48pm – Numerical Simulation and Analysis of HeatRecovery for Multi-Stage Air CompressorsTechnical Presentation. IMECE2018-89705Yiming Ma, Yi Chu, FS-Elliott CN Co., Shanghai, China,Rongxin Zhang, Brad Hayes, FS-Elliott LLC, Export, PA,United States, Xuyang Chi, FS-Elliott CN Co., Shanghai,Shanghai, China


9-12 4th FORUM ON MULTIPHASE FLOWWITH BIO-APPLICATIONS9-12-1 Multiphase Flow With Bio-ApplicationsThird Floor, David L. Lawrence Convention Center, Room 318

8:55am–10:40am

Session Chair: Ning Zhang, McNeese State University, Lake Charles, LA, United States

8:55am – Multiphase Fluid Flow Modeling for BiomedicalApplication (Shirodhara)Technical Presentation. IMECE2018-87432Swathika M., Indian Institute of Technology Madras, Chennai,Tamil Nadu, India, B.T. Kannan, Independent Trainer/Consultant, Chennai, Tamil Nadu, India, L. Sugumar, Sukra Helitek Pvt. Ltd., Chennai, Tamil Nadu, India,Lakshmana Rao C., Balasubramanian Venkatesh, IndianInstitute of Technology Madras, Chennai, Tamil Nadu, India

9:16am – Modelling of the Transport of Salinity and OrganicMatters in Sabine LakeTechnical Presentation. IMECE2018-89896Ning Zhang, McNeese State University, Lake Charles, LA,United States

9:37am – Interaction and Coalescence on a Pair of Laser-Induced BubblesTechnical Presentation. IMECE2018-89903Yiwei Wang, Hongchen Li, Jingzhu Wang, Institute ofMechanics, Chinese Academy of Sciences, Beijing, China

9-14 SYMPOSIUM ON WIND TURBINESAERODYNAMICS AND CONTROL9-14-1 Symposium on Wind Turbines Aerodynamicsand ControlThird Floor, David L. Lawrence Convention Center, Room 319

8:55am–10:40am

Session Chair: Majid Rashidi, Cleveland State University,Pepper Pike, OH, United States

8:55am – Aerodynamic Shape Optimization of DiffuserAugmented Wind Turbine Shrouds Using AsynchronousDifferential EvolutionTechnical Paper Publication. IMECE2018-86820Stavros Leloudas, Georgios Lygidakis, Giorgos Strofylas,Ioannis Nikolos, Technical University of Crete, Chania, Greece

9:16am – The Impact of the Wind Power Plant on the AirRadar’s FunctioningTechnical Paper Publication. IMECE2018-86823Victorita Radulescu, University Politechnica of Bucharest,Bucharest, Romania


118

9:37am – Genetic Algorithm-Based Design of Airfoil for theRoot Region of Small Wind Turbines and PerformanceAnalysis With Gurney FlapsTechnical Paper Publication. IMECE2018-87327Mohammed Rafiuddin Ahmed, Krishnil R. Ram, University of the South Pacific, Suva, Fiji, Bum-Suk Kim, Jeju NationalUniversity, Jeju, Korea (Republic), Sunil P. Lal, MasseyUniversity, Palmerston, New Zealand

9:58am – Numerical Simulation on AerodynamicPerformance of Ram Air Turbine Based on Mixed FlowFieldTechnical Paper Publication. IMECE2018-88304Xiangbo Zhang, Shuiting Ding, Fenzhu Ji, Farong Du,Beihang University, Beijing, China, Shengrong Guo, NanjingEngineer Institute of Aircraft System Jincheng, Nanjing, China

9-15 18th INTERNATIONAL SYMPOSIUM ONMEASUREMENT AND MODELING OFENVIRONMENTAL FLOWS9-15-1 18th International Symposium onMeasurement and Modeling of Environmental FlowsThird Floor, David L. Lawrence Convention Center, Room 323

8:55am–10:40am

Session Chair: S.A. Sherif, University of Florida, Gainesville,FL, United States

Session Co-Chair: Kashif Nawaz, Oak Ridge NationalLaboratory, Oak Ridge, TN, United States

8:55am – PittPack: Open-Source FFT-Based Poisson’sEquation Solver for Computing With AcceleratorsTechnical Paper Publication. IMECE2018-87697Jaber Javanshir Hasbestan, University of Pittsburgh, EastRidge, TN, United States, Inanc Senocak, University ofPittsburgh, Pittsburgh, PA, United States

9:16am – Front Dynamics in Miscible Displacement Flow ina Curved PipeTechnical Paper Publication. IMECE2018-88449Mohammadreza Yavari, Majid Bazargan, Khaje Nassir ToosiUnivesrity of Technology, Tehran, Iran, Elaheh Bagherizadeh,Stony Brook University, Stony Brook, NY, United States

9:37am – Effect of Wind Speed on Ventilation Flow Througha Two Dimensional Room Fitted With a WindcatcherTechnical Paper Publication. IMECE2018-88666Rahil Taghipour, Peter Abdo, University of TechnologySydney, Sydney, Australia, B. Phuoc Huynh, University ofTechnology Sydney, Broadway NSW, Australia

9:58am – Large Eddy Simulation of TurbulentFreestream/Bed Interactions With CoupledSurface/Subsurface Momentum BalanceTechnical Presentation. IMECE2018-89196Y. P. Lian, J. D. Dallmann, B. H. Sonin, K. R. Roche,A. I. Packman, Gregory Wagner, Northwestern University,Evanston, IL, United States

10:19am – Interference of Straight and Tapered CylinderPairs Near the First Critical SpeedTechnical Presentation. IMECE2018-89883Rishav Rishav, Srinivas V. Veeravalli, Indian Institute ofTechnology Delhi, Delhi, Delhi, India, Suhail Ahmad, IndianInstitute of Technology Delhi, Hauz Khas, New Delhi, Delhi,India

9-4 24th SYMPOSIUM ON FUNDAMENTALISSUES AND PERSPECTIVES IN FLUIDMECHANICS9-4-1 Fundamentals and Basic ResearchThird Floor, David L. Lawrence Convention Center, Room 318

10:50am–12:35pm

Session Chair: John Buchanan, UNNPP, Pittsburgh, PA,United States

Session Co-Chair: Wayne Strasser, Eastman Chemical Co.,Kingsport, TN, United States

10:50am – Extracting Substantial Free Energy From StaticAmbient Potential Energy Using Distance, Time-LapseChaos, and Coriolis PrinciplesTechnical Paper Publication. IMECE2018-86128Jim Surjaatmadja, Halliburton, Duncan, OK, United States

11:11am – Liquid Sloshing in a Partially-Filled Enclosuredue to Sudden Impact or Periodic MotionTechnical Presentation. IMECE2018-86724Bakhtier Farouk, Drexel University, Philadelphia, PA, UnitedStates

11:32am – The Reynolds Stress in Turbulence From anAlternate PerspectiveTechnical Paper Publication. IMECE2018-86870Taewoo Lee, Arizona State University, Tempe, AZ, UnitedStates

11:53am – Force Decomposition of Medium ReynoldsNumber Oscillating Flow Over a Submerged SphereTechnical Paper Publication. IMECE2018-88187Aibek Bekkulov, University of Texas Rio Grande Valley,Edinburg, TX, United States, Shehua Huang, WuhanUniversity, Wuhan, Hubei, China, Ben Xu, University of TexasRio Grande Valley, Edinburg, TX, United States

12:14pm – Effect of Slip Length on Drag Reduction andDelayed Transition in Laminar Channel FlowTechnical Presentation. IMECE2018-89179Ethan Davis, Jae Sung Park, University of Nebraska–Lincoln,Lincoln, NE, United States


119

9-16 11th FORUM ON FLUID MEASUREMENTSAND INSTRUMENTATION9-16-1 Fluid Measurements and Instrumentation – IThird Floor, David L. Lawrence Convention Center, Room 319

10:50am–12:35pm

Session Chair: Stamatios Pothos, TSI Incorporated,Shoreview, MN, United States

10:50am – Digital Processors’ Algorithms Used in LaserBased Pointwise Measurement TechniquesTechnical Presentation. IMECE2018-86837Stamatios Pothos, Daniel Troolin, TSI Incorporated,Shoreview, MN, United States

11:11am – Effect of Passive Green Wall Modules on AirTemperature and HumidityTechnical Paper Publication. IMECE2018-86963Peter Abdo, University of Technology Sydney, Sydney,Australia, B. Phuoc Huynh, Univesrity of Technology Sydney,Broadway NSW, Australia

11:32am – Volumetric Velocity and Sizing Using Imaging inTwo Phase FlowsTechnical Presentation. IMECE2018-87831Daniel Troolin, Aaron Boomsma, Stamatios Pothos, TSIIncorporated, Shoreview, MN, United States

11:53am – Stereoscopic Particle Shadow VelocimetryTechnical Paper Publication. IMECE2018-88013Jeff Harris, Christine Truong, Pennsylvania State University,State College, PA, United States, Michael McPhail, MayoClinic, Phoenix, AZ, United States, Arnie Fontaine,Pennsylvania State University, State College, PA, United States

12:14pm – Settling Characteristics of Polymeric Additivesin DodecaneTechnical Paper Publication. IMECE2018-88555Gurjap Singh, Stephen Pitts, University of Iowa, Iowa City, IA,United States, Elio Lopes, Santa Catarina State University,Joinville, Santa Catarina, Brazil, Albert Ratner, University ofIowa, Iowa City, IA, United States

9-2 16th SYMPOSIUM ON ELECTRIC,MAGNETIC AND THERMAL PHENOMENAIN MICRO- AND NANO-SCALE SYSTEMS9-2-1 Electric, Magnetic & Thermal PhenomenaThird Floor, David L. Lawrence Convention Center, Room 317

2:05pm–3:50pm

Session Chair: Dennis A. Siginer, Botswana InternationalUniversity of Science and Technology & Universidad deSantiago de Chile, Santiago in Chile & Palapye in Botswana,Chile

Session Co-Chair: Boris Khusid, New Jersey Institute ofTechnology, Newark, NJ, United States

2:05pm – Characterizing Microfluidic OperationsUnderlying an Electrowetting Heat Pipe on the InternationalSpace StationTechnical Paper Publication. IMECE2018-86223Enakshi Wikramanayake, Renee Hale, John Elam, ArjangShahriari, Vaibhav Bahadur, University of Texas at Austin,Austin, TX, United States, Angel R. Alvarez-Hernandez,Nathan Howard, NASA Johnson Space Center, Houston, TX,United States

2:26pm – Dielectrophoretic Control of a Droplet at theInterface of Two Liquids in a Three Liquid SystemTechnical Paper Publication. IMECE2018-86487Manojkumar Lokanathan, Enakshi Wikramanayake,Vaibhav Bahadur, Roger Bonnecaze, University of Texas atAustin, Austin, TX, United States

2:47pm – Enhancement in Gas Pumping to GenerateCorona Wind by an EHD Gas PumpTechnical Presentation. IMECE2018-86958A.K.M. Monayem Mazumder, Saginaw Valley State University,Saginaw, MI, United States

3:08pm – Electric Field Control of Propulsion Force ofChemically Driven Marangoni LocomotorTechnical Presentation. IMECE2018-87233Shigeki Tsuchitani, Takumi Ikebe, Hirofumi Miki, KunitomoKikuchi, Wakayama University, Wakayama, Japan


120

9-4 24th SYMPOSIUM ON FUNDAMENTALISSUES AND PERSPECTIVES IN FLUIDMECHANICS9-4-2 Computational Methods in Fluid MechanicsThird Floor, David L. Lawrence Convention Center, Room 318

2:05pm–3:50pm

Session Chair: Taewoo Lee, Arizona State University, Tempe,AZ, United States


2:05pm – A Central Difference Finite Volume LatticeBoltzmann Method for Simulation of 2D InviscidCompressible Flows on Triangular MeshesTechnical Paper Publication. IMECE2018-86302Alireza Karbalaei, University of Central Florida, Orlando, FL,United States, Kazem Hejranfar, Sharif University ofTechnology, Tehran, Tehran, Iran

2:26pm – Finite Element Models of One-Dimensional FlowsWith Node-Dependent AccuracyTechnical Paper Publication. IMECE2018-86852Daniele Guarnera, Enrico Zappino, Alfonso Pagani, ErasmoCarrera, Politecnico di Torino, Torino, Italy

2:47pm – Characterization of Model-Based Uncertainties inIncompressible Turbulent Flows by Machine LearningTechnical Paper Publication. IMECE2018-87178Mustafa Usta, Lehigh University, Bethlehem, PA, UnitedStates, Ali Tosyali, Rutgers, The State University of NewJersey, Piscataway, NJ, United States

3:08pm – Computational Investigation of Flow OverGeometry Compliant Lattice StructuresTechnical Paper Publication. IMECE2018-87846James Tinsley, Honeywell FM&T, Kansas City, MO, UnitedStates, Kelly Homan, Missouri University of Science &Technology, Rolla, MO, United States, Gregory Vernon,Honeywell FM&T, Kansas City, MO, United States

3:29pm – Bridging Method of Turbulence for High ReynoldsNumber Separated Flows Past Bluff BodiesTechnical Presentation. IMECE2018-89693Sagar Saroha, Sawan S. Sinha, Indian Institute of TechnologyDelhi, Delhi, Delhi, India, Sunil Lakshmipathy, Gexcon AS,Bergen, Norway

9-16 11th FORUM ON FLUIDMEASUREMENTS ANDINSTRUMENTATION9-16-2 Fluid Measurements and Instrumentation – IIThird Floor, David L. Lawrence Convention Center, Room 319

2:05pm–3:50pm

Session Chair: Ivaylo Nedyalkov, University of NewHampshire, Durham, NH, United States

2:05pm – Practical Considerations for Simultaneous LDVand PIV MeasurementsTechnical Presentation. IMECE2018-86841Stamatios Pothos, Daniel Troolin, Aaron Boomsma, TSIIncorporated, Shoreview, MN, United States

2:26pm – An Experimental Setup to Characterize BoundaryLayer Asymmetry on a Spinning Projectile Using MagneticResonance VelocimetryTechnical Paper Publication. IMECE2018-87472Kevin Sullivan, U.S. Military Academy, Avon Lake, OH, UnitedStates, Aaron P. Schlenker, U.S. Military Academy,Lenhartsville, PA, United States, Noah W. Siegel, U.S. MilitaryAcademy, Las Vegas, NV, United States, Isaiah Valdez, U.S.Military Academy, Aztec, NM, United States, Bret Van Poppel,Michael Benson, U.S. Military Academy, West Point, NY,United States, Gregory Rodebaugh, Armament ResearchDevelopment and Engineering Center, Picatinny, NJ, UnitedStates, Christopher Elkins, Stanford University, Palo Alto, CA,United States, Chase Snow, U.S. Army, West Point, NY, UnitedStates

2:47pm – Weep Hole and Interlayer Gap Flow WithinLayered Pressure VesselsTechnical Paper Publication. IMECE2018-87948Cameron Coates, Timothy Chastain, Georgia SouthernUniversity, Savannah, GA, United States

3:08pm – CFD Analysis of Vortex Shedding of an IsolatedRolling TireTechnical Presentation. IMECE2018-88443Navid Goudarzi, UNCC, Charlotte, NC, United States

3:29pm – Optical Measurement Techniques to DevelopmentCardiovascular DevicesTechnical Presentation. IMECE2018-88630Keefe Manning, Pennsylvania State University, UniversityPark, PA, United States


121

9-4 24th SYMPOSIUM ON FUNDAMENTALISSUES AND PERSPECTIVES IN FLUIDMECHANICS9-4-3 Fundamental Fluids Engineering andApplicationsThird Floor, David L. Lawrence Convention Center, Room 318

4:00pm–5:45pm

Session Chair: John Buchanan, UNNPP, Pittsburgh, PA,United States


4:00pm – The Effect of Delta Winglet Inclination Angle onthe Vortical Flow DownstreamTechnical Paper Publication. IMECE2018-86331Junguo Wang, David Ting, University of Windsor, Windsor,ON, Canada, Steve Ray, Essex Energy, Oldcastle, ON, Canada

4:21pm – Numerical Investigation of Velocity Coefficient forOrganic Turbine Nozzles Using MM as Working FluidTechnical Paper Publication. IMECE2018-87212Laihe Zhuang, Guoqiang Xu, Jie Wen, Bensi Dong, BeihangUniversity, Beijing, China

4:42pm – Analyzing the Shear Heating Effects in Modelingthe Hydrodynamic Lubrication of High Torque Low SpeedDiesel Engine by Considering Different Viscosity-GradeLubricantsTechnical Paper Publication. IMECE2018-88238Saqib Naseer, NUST College of Electrical and MechanicalEngineering, Rawalpindi, Pakistan, Syed Adnan Qasim,NUTECH School of Engineering & Technologies, Islamabad,Punjab, Pakistan, Raja Amer Azim, NUST College of E&ME,Rawalpindi, Punjab, Pakistan, Kishwat Ijaz Malik, University ofWah, Wah Cant, Punjab, Pakistan

5:03pm – Performance Evaluation of Coefficient ofPerformance of Variable Refrigerants Using VapourCompression Refrigeration System ModelTechnical Presentation. IMECE2018-88774Cyril Okorowo, Institute of Management and Technology,Enugu, Enugu, Nigeria, Okechukwu T. Onah, Enugu StateUniversity of Science and Technology, Enugu, Enugu, Nigeria

5:24pm – Organized Motion of Turbulent Flow at LowReynolds Number in a Square DuctTechnical Presentation. IMECE2018-89560Hamid Hassan Khan, Indian Institute of Technology Delhi,New Delhi, India, Syed Fahad Anwer, Nadeem Hasan, AligarhMuslim University, Aligarh, Uttar Pradesh, India, SanjeevSanghi, Indian Institute of Technology Delhi, New Delhi, Delhi,India


122

10-1-1: Analysis of Thermal Systems10-3-1: K6-2 Numerical Analysis and Performance

Assessment of Energy Systems10-4-1: System Analysis10-4-2: Component/Material Design and Analysis10-6-1: Batteries10-6-2: Capacitors10-7-1: Analysis of RadiativeTransfer in Energy

Systems10-7-2: Radiative Properties10-8-1: Heat Transfer in PassiveThermal Control

Systems10-10-1: K6-9Two Phase Transport in Energy Systems

and Non-Equilibrium and Dynamic EnergySystems

10-11-1: K6-10 Panel on the Key Role of Heat TransferAnalysis and Methodology in Research

10-13-1: Measurements of Thermophysical Properties10-14-1: Calculations of Thermophysical Properties 110-14-2: Calculations of Thermophysical Properties 210-15-1: Fundamentals of Boiling and Evaporation10-15-2: K8-1 Fundamentals of Boiling10-15-3: K8-1 Fundamentals of Boiling, Evaporation,

and Condensation10-16-1: K8-2 Fundamentals of Single Phase

Convection10-17-1: Fundamentals of Multi-Scale Modeling10-18-1: K8-4 Fundamentals of Liquid/Solid Phase

Change (Icing/Deicing, Solidification)10-20-1: Panel on Fundamentals of Non-Equilibrium

Transport10-21-1: K9-1 Thermal Transport across Hard/Soft

Interfaces – I10-21-2: K9-1Thermal Transport across Hard/Soft

Interfaces – II10-21-3: K9-1Thermal Transport across Hard/Soft

Interfaces – III10-22-1: K9-2 CoupledThermalTransport by Electrons,

Magnons, and Phonons10-23-1: K9-3 Phononic Crystals andThermoelectrics –

I10-23-2: K9-3 Phononic Crystals and Thermoelectrics –

II10-25-1: K9-5 Micro/Nanoscale Phase Change Heat

Transfer – I10-25-2: K9-5 Micro/Nanoscale Phase Change Heat

Transfer – II10-26-1: Measurement of Near-FieldThermal Radiation10-26-2: Theoretical Prediction of Thermal Emission

and Energy Conversion10-26-3: Radiative Properties and Radiative Transfer in

the Far Field10-27-1: Thermal Metrology for Nanoscale Heat

Transfer10-28-1: K9-8 Advances in Simulation Methods10-29-1: Heat Conduction in 2D Materials/Devices10-29-2: Heat Transfer Devices and Engineering10-29-3: Transport at Interfaces10-29-4: Thermal Conductivity10-29-5: Thermal Engineering with Plasmonic

Materials10-29-7: Micro-/Nanoelectronics and Related Issues10-30-1: Single-Phase Enhanced Heat Transfer –

Numerical Studies – II10-30-2: Single-Phase Enhanced Heat Transfer –

Numerical Studies – I

10-30-3: Single-Phase Enhanced Heat Transfer –Numerical Studies – III

10-32-1: CMS – Combustion Power System10-33-1: CMS – Sprays and Emissions10-34-1: CMS – Applied Combustion – Modeling Heat

Transfer and Combustion10-34-2: CMS – Applied Combustion – Improving

System Performance10-36-1: K13-1 Heat Transfer in Multiphase Systems – I10-36-2: K13-1 Heat Transfer in Multiphase Systems

– II10-36-3: K13-1 Heat Transfer in Multiphase Systems

– III10-39-1: GasTurbine HeatTransfer and Cooling10-40-1: K15-1Transport Phenomena in

Manufacturing and Materials Processing – I10-40-2: K15-1 Transport Phenomena in

Manufacturing and Materials Processing – II10-42-1: K16-1: Heat Transfer in Electronic

Equipment – I0-42-2: K16-1: Heat Transfer in Electronic Equipment – II

10-44-1: Thermal Transport under Microscale andRotating Features

10-44-2: Thermal Transport Understanding and ItsApplications

10-47-1: HeatTransfer and Heat Exchange10-50-1: Heat Transfer in HVAC Systems and Air

Quality and Comfort in Confined Spaces10-51-1: Thermal Management of Electronic

Equipment10-53-1: Applications of Computational Heat

Transfer: Convection10-53-2: Applications of Computational Heat

Transfer: Industrial Applications10-54-1: Methods in Computational Heat Transfer10-55-1: Heat Transfer and Fluid Flow Roundtable:

Navigating the Code Landscape10-55-2: HeatTransfer and Fluid Flow Roundtable:

Navigating the Code Landscape10-56-1: Panel on Recent Advances in Heat Transfer

Education10-59-1: Heat and Mass Transport Photogallery10-60-1: Prof. Frank Kreith Memorial Symposium:

Advances in Heat Transfer, Energy Systems & Sustainability – I

10-60-2: Prof. Frank Kreith Memorial Symposium:Advances in Heat Transfer, Energy Systems & Sustainability – II

10-60-3: Prof. Frank Kreith Memorial Symposium: Advances in Heat Transfer, Energy Systems & Sustainability – III

10-61-1: K8-7 Fundamentals of Boiling andCondensation – II-B

10-61-2: K8-7 Fundamentals of Condensation,Transient Boiling, and Dehumidification

10-62-1: Single-Phase Enhanced Heat Transfer –Applications

10-63-1: Multi-Phase and Passive Enhanced HeatTransfer

10-63-2: Multi-Phase and Passive Enhanced HeatTransfer

10-64-1: HeatTransfer andThermal EngineeringPlenary I

10-64-2: HeatTransfer andThermal EngineeringPlenary II

Track OrganizersJohn Maulbetsch, Maulbetsch Consulting, United

States Kevin Dowding, Sandia National Laboratories,

United States Peiwen Li, University of Arizona, United States

Topic OrganizersMitra Sexton, Knolls Atomic Power Lab, United

States Matthew Schifano, Naval Nuclear Laboratory,

United StatesAlexander Rattner, The Pennsylvania State

University, United States Hohyun Lee, Santa Clara University, United

StatesLeitao Chen, Rice University, United States Laura Schaefer, Rice University, United StatesMatthew R. Jones, Brigham Young University,

United States Rydge Mulford, Brigham Young University, United

StatesDavid Pratt, USAF, United StatesNesrin Ozalp, University of Minnesota Duluth,

United StatesNicholas Roberts, Utah State University, United

StatesXianming Bai, Virginia Tech, United StatesAmitabh Narain, Michigan Tech University, United

StatesVaibhav Bahadur, University of Texas at Austin,

United States Navdeep Singh Dhillon, California State

University Long Beach, United States Sajjad Bigham, Michigan Technological

University, United States Alan McGaughey, Carnegie Mellon University,

United StatesPatrick Oosthuizen, Queen's University, Canada Chris Kobus, Oakland University, United States Oronzio Manca, Università degli Studi della

Campania, Italy Amitabh Narain, Michigan Tech University, United

States Nicholas Roberts, Utah State University, United

States Vaibhav Bahadur, University of Texas at Austin,

United StatesYan Wang, University of Nevada, Reno, United

StatesXiulin Ruan, Purdue University, United StatesLiping Wang, Arizona State University, United

States Sanjiv Sinha, University of Illinois, United States Sangyeop Lee, University of Pittsburgh, United

States Dong Liu, University of Houston, United StatesSandra Boetcher, Embry-Riddle Aeronautical

University, United States Subramanyaravi Annapragada, United

Technologies Research, United States Gongnan Xie, Northwestern Polytechnical

University, China Kashif Nawaz, Oak Ridge National Laboratory |

ORNL, United States Cheng-xian Lin, Florida International University,

United StatesOmid Askari, Mississippi State University, United

States Like Li, Mississippi State University, United

States Albert Ratner, University of Iowa, United States Mehdi Esmaeilpour, Marshall University, United

StatesMohsen Ghamari, Wilkes University, United

States Kris Jorgensen, A. O. Smith, Brookfield, WI,

United StatesAbhijit Mukherjee, California State University,

United StatesVinod Srinivasan, UMN, Minneapolis, MN, United

States Scott Thompson, Auburn University, United

States

Stephen Lynch, Penn State University, UnitedStates

John Blanton, Classic Engineering, LLC, UnitedStates

Andrew Nix, West Virginia University, UnitedStates

Phillip M. Ligrani, University of Alabama InHuntsville, United States

Minking Chyu, University of Pittsburgh, UnitedStates

Patrick Mensah, Southern University, UnitedStates

Ying Sun, Mechanical Engineering, DrexelUniversity, United States

Seungbae Park, Binghamton University, UnitedStates

Hendrik PJ De Bock, GE Global Research, UnitedStates

Ankur Jain, UTA, United StatesQiuwang Wang, Xi'an Jiaotong University, China Xinwei Wang, Iowa State University, United

StatesS. A. Sherif, University of Florida, United States Michael Pate, Texas A&M University, United

States Columbia Mishra, Intel Corporation, United

States Shima Hajimirza, Texas A&M University, United

States Sandip Mazumder, Ohio State University, United

StatesAaron Wemhoff, Villanova University, United

StatesSamuel Subia, Sandia National Laboratories,

United StatesJohn Tencer, Sandia National Laboratories,

United States Xiuling Wang, Purdue University Northwest,

United StatesCheng-xian Lin, Florida International University,

United StatesElia Merzari, Argonne National Laboratory, United

StatesLeitao Chen, Rice University, United StatesNenad Miljkovic, University of Illinois at Urbana-

Champaign, United States Chang Kyoung Choi, Michigan Technological

University, United StatesRaj M. Manglik, University of Cincinnati, United

StatesSatwindar Sadhal, University of Southern

California, United States Navdeep Singh Dhillon, California State

University Long Beach, United StatesSandra Boetcher, Embry-Riddle Aeronautical

University, United StatesSubramanyaravi Annapragada, United

Technologies Research, United StatesEbrahim Al-Hajri, Petroleum Institute of Abu

Dhabi, United Arab Emir. Amanie Abdelmessih, California Baptist

University, United States Mark Kedzierski, NIST, United StatesA. G. Agwu Nnanna, University of Texas of the

Permian Basin, United States Ahmed Elatar, Oak Ridge National Laboratory,

United States

Session OrganizersMitra Sexton, Knolls Atomic Power Lab, United

StatesLeitao Chen, Rice University, United States Diana-Andra Borca-Tasciuc, Rensselaer Polytech

Instit, United States C. Thomas Avedisian, Cornell University, United

StatesIsaac Perez-Raya, Rochester Institute of

Technology, United StatesNavdeep Dhillon, California State University Long

Beach, United StatesChris Kobus, Oakland University, United StatesAlan McGaughey, Carnegie Mellon University,

United StatesEnakshi Wikramanayake, University of Texas at

Austin, United States

Shalabh Maroo, Syracuse University, UnitedStates

Yan Wang, University of Nevada, Reno, UnitedStates

Xiulin Ruan, Purdue University, United StatesBladimir Ramos, Penn State University, United

States Hasan Babaei, University of Pittsburgh, Carnegie

Mellon University, United StatesYee Kan Koh, National University of Singapore,

SingaporeAnil Yuksel, IBM Corporation, United StatesTengfei Luo, University of Notre Dame, United

States Ruiqiang Guo, Caltech, United StatesYanliang Zhang, University of Notre Dame,

United States Tianli Feng, Vanderbilt University/Oak Ridge

National Laboratory, United StatesRuiqiang Guo, Caltech, United StatesDong Liu, University of Houston, United States Chuanhua Duan, Boston University, United

StatesBo Zhao, Stanford University, United StatesSheng Shen, Carnegie Mellon University, United

States Sheila Edalatpour, University of Maine, United

StatesZhen Chen, Southeast University, ChinaYongjie Hu, University of California, Los Angeles

(UCLA), United StatesSanjiv Sinha, University of Illinois, United StatesYaguo Wang, University of Texas, United States Michael Pettes, LANL MPA-CINT, United StatesNeil Zuckerman, Seagate Technologies, United

StatesYan Wang, University of Nevada, Reno, United

StatesYee Kan Koh, National University of Singapore,

SingaporeEdward Kinzel, Missouri University of Science

and Technology, United States Yu-bin Chen, National Tsing Hua University,

TaiwanYanbao Ma, University California, Merced, United

StatesMaulik Shelat, Praxair, United StatesAhmed Elatar, Oak Ridge National Laboratory,

United StatesOmid Askari, Mississippi State University, United

StatesMohsen Ghamari, Wilkes University, United

States Mohsen Ayoobi, Wayne State University, United

StatesMehdi Esmaeilpour, Marshall University, United

StatesAbhijit Mukherjee, California State University

Northridge, United StatesStephen Akwaboa, Southern University and A&M

College, United StatesShima Hajimirza, Texas A&M University, United

StatesSamuel Subia, Sandia National Laboratories,

United States Aaron Wemhoff, Villanova University, United

StatesLeitao Chen, Rice University, United StatesShreyas Chavan, University of Illinois at Urbana-

Champaign, United States Muhammad Jahidul Hoque, University of Illinois

Urbana-Champaign, United StatesSajjad Bigham, Michigan Technological

University, United States Enakshi Wikramanayake, University of Texas at

Austin, United StatesMark Kedzierski, NIST, United States Yaroslav Chudnovsky, Gas Technology Institute,

United StatesAmanie Abdelmessih, California Baptist

University, United StatesAhmed Elatar, Oak

United States

TRACK 10 HEAT TRANSFER AND THERMALENGINEERINGMONDAY, NOVEMBER 12

10-3 K6-2 NUMERICAL ANALYSIS ANDPERFORMANCE ASSESSMENT OF ENERGYSYSTEMS 10-3-1 K6-2 Numerical Analysis and PerformanceAssessment of Energy SystemsThird Floor, David L. Lawrence Convention Center, Room 323

9:45am–11:30am

Session Chair: Mitra Sexton, Knolls Atomic Power Lab, CliftonPark, NY, United States

9:45am – Numerical Simulation of Convection and HeatTransfer in Unsteady Transverse Tube BanksTechnical Paper Publication. IMECE2018-86897Ling ling, Wenjie Wang, Mo Yang, University of Shanghai forScience and Technology, Shanghai, China

10:06am – Forced Convection Enhancement in a SquareChannel by an EHD Gas PumpTechnical Presentation. IMECE2018-86961A.K.M. Monayem Mazumder, Saginaw Valley State University,Saginaw, MI, United States

10:27am – Numerical Investigation on Simultaneous Effectsof Surface Roughness and Variable Properties on LaminarFlow in Annular TubesTechnical Paper Publication. IMECE2018-88288Morteza Heydari, Amirhossein Bagheri, Hamid Sadat,Huseyin Bostanci, Seifollah Nasrazadani, University of NorthTexas, Denton, TX, United States

10:48am – Accelerating Evaluation of Converged LatticeThermal ConductivityTechnical Presentation. IMECE2018-89007Guangzhao Qin, Ming Hu, University of South Carolina,Columbia, SC, United States

11:09am – The Adiabatic Analysis on Rotary DisplacerStirling EngineTechnical Paper Publication. IMECE2018-87758Amirhossein Bagheri, William C. Mullins, Phillip R. Foster,Huseyin Bostanci, University of North Texas, Denton, TX,United States

10-4 K6-3 HEAT TRANSFER ANALYSIS INWASTE HEAT RECOVERY SYSTEMS10-4-2 Component/Material Design and AnalysisThird Floor, David L. Lawrence Convention Center, Room 327

9:45am–11:30am

Session Chair: Hohyun Lee, Santa Clara University, SantaClara, CA, United States

9:45am – Studies on the Hard Chrome Plating inReciprocating Air CompressorsTechnical Paper Publication. IMECE2018-86532Aadhithiyan Amutha Kulasekaran, National Institute ofTechnology, Sundergarh, Odisha, India, AnbarasuSubramanian, National Institute of Technology, Rourkela,Rourkela, Odisha, India

10:06am – Experimental Investigation of Heat Pipe HeatExchanger (HPHE) for Waste Heat Recovery ApplicationTechnical Presentation. IMECE2018-88031Md. Farhan Shakil, A.K.M.M. Morshed, BangladeshUniversity of Engineering & Technology, Dhaka, Bangladesh,Azzam Salman, University of South Carolina, West Columbia,SC, United States, Titan Paul, University of South CarolinaAiken, Aiken, SC, United States

10:27am – Thermomechanical Reliability in ThermoelectricPower Generators Consisting of Low Thermal ConductivityMaterialsTechnical Presentation. IMECE2018-86606Hee Seok Kim, University of South Alabama, Mobile, AL,United States

10:48am – Thermal and Phonon Transport Analysis in 2DMaterials Systems With Record-High Efficiency for WastHeat RecoveryTechnical Presentation. IMECE2018-86053Joon Sang Kang, Man Li, Yongjie Hu, University of California,Los Angeles, Los Angeles, CA, United States

10-21 K9-1 THERMAL TRANSPORT ACROSSHARD/SOFT INTERFACES10-21-1 K9-1 Thermal Transport Across Hard/SoftInterfaces – IThird Floor, David L. Lawrence Convention Center, Room 325

9:45am–11:30am

Session Chair: Xiulin Ruan, Purdue University, West Lafayette,IN, United States

Session Co-Chair: Sangyeop Lee, University of Pittsburgh,Pittsburgh, PA, United States

9:45am – Achieving Huge Thermal Conductance of MetallicNitride on Graphene Through Enhanced Elastic andInelastic Phonon TransmissionTechnical Presentation. IMECE2018-89402Weidong Zheng, Bin Huang, Hongkun Li, Yee Kan Koh,National University of Singapor ngapor

TRACK 10 HEAT TRANSFER AND THERMAL ENGINEERING – MONDAY, NOVEMBER 12

123

10:06am – Nonequilibrium Landauer Approach for ThermalInterfacesTechnical Presentation. IMECE2018-89938Jingjing Shi, Xiaolong Yang, Purdue University, WestLafayette, IN, United States, Timothy Fisher, University ofCalifornia, Los Angeles, Los Angeles, CA, United States, XiulinRuan, Purdue University, West Lafayette, IN, United States

10:27am – Fullerene-Based Superatomic Crystals? ThermalTransport Controlled by Orientation DisorderTechnical Presentation. IMECE2018-87762Matthew Bartnof, Alexander D. Christodoulides, CarnegieMellon University, Pittsburgh, PA, United States, Wee-LiatOng, ZJU-UIUC, Zhejiang University, Haining, ZhejiangProvince, China, Evan O’Brien, Xavier Roy, ColumbiaUniversity, New York, NY, United States, Alan McGaughey,Jonathan Malen, Carnegie Mellon University, Pittsburgh, PA,United States

10:48am – Strain Effect on Thermal Transport in CarbonNanotube-Graphene JunctionsTechnical Paper Publication. IMECE2018-87764Jungkyu Park, Paul Pena, Kennesaw State University,Marietta, GA, United States

11:09am – Implication of 1D-2D van der WaalsHeterostructures for Pressure SensorsTechnical Presentation. IMECE2018-89083Yuan Gao, Baoxing Xu, University of Virginia, Charlottesville,VA, United States

10-51 K20-1 THERMAL MANAGEMENT OFELECTRONIC EQUIPMENT10-51-1 Thermal Management of ElectronicEquipmentFourth Floor, David L. Lawrence Convention Center, Room 404

9:45am–11:30am

Session Chair: Columbia Mishra, Intel Corporation, Hillsboro,OR, United States

Session Co-Chairs: Vaibhav Bahadur, University of Texas atAustin, Austin, TX, United States, Shima Hajimirza, Texas A&MUniversity, College Station, TX, United States

9:45am – Design and Testing of Liquid Cooled ThermalSolution for High Loading (Socket P) ProcessorsTechnical Paper Publication. IMECE2018-86730Anali Soto, Veronica Torreblanca, Intel, Zapopan, Jalisco,Mexico, Devdatta Kulkarni, Intel, Hillsboro, OR, United States

10:06am – Spray Cooling-Based Thermal Management ofExtreme Power Densities Using Orthotropic CompositeHeat SpreadersTechnical Presentation. IMECE2018-87708Huseyin Bostanci, Sai S. Obuladinne, University of NorthTexas, Denton, TX, United States

10:27am – Raising Inlet Air Temperature for a Hybrid-Cooled Server Retrofitted With Liquid Cooled Cold PlatesTechnical Paper Publication. IMECE2018-88497Uschas Chowdhury, Ashwin Siddarth, Manasa Sahini,Dereje Agonafer, University of Texas at Arlington, Arlington,TX, United States

10:48am – Feasibility Study of Effective Cooling ThroughMicrochannel Heat Sink (MCHS) and NanofluidApplicationsTechnical Paper Publication. IMECE2018-88690Darryl Jennings, Jr., Sonya Smith, Howard University,Washington, DC, United States

11:09am – Wake Vortex Regimes in Airflows Generated byPiezoelectric Fans and Their Effect on the Mean Air JetTechnical Presentation. IMECE2018-89181Navid Dehdari Ebrahimi, Y. Sungtaek Ju, University ofCalifornia, Los Angeles, Los Angeles, CA, United States

10-59 K22-1 HEAT AND MASS TRANSPORTPHOTOGALLERY10-59-1 Heat and Mass Transport PhotogalleryThird Floor, David L. Lawrence Convention Center, Room 326

9:45am–11:30am

Session Chair: Shreyas Chavan, University of Illinois atUrbana-Champaign, Urbana, IL, United States

Session Co-Chair: Muhammad Jahidul Hoque, University ofIllinois at Urbana-Champaign, Urbana, IL, United States

Coalescence-Induced Droplet Jumping onSuperhydrophobic Nanostructured, SuperhydrophobicHierarchical, and Biphilic Hierarchical SurfacesPoster Presentation. IMECE2018-86903Xiao Yan, Soumyadip Sett, Lezhou Feng, Leicheng Zhang,University of Illinois at Urbana-Champaign, Urbana, IL, UnitedStates, Zhiyong Huang, Feng Chen, Tsinghua University,Beijing, Beijing, China, Nenad Miljkovic, University of Illinois atUrbana-Champaign, Urbana, IL, United States

Dynamic Defrosting on Superhydrophobic and Bi-PhilicSurfacesPoster Presentation. IMECE2018-86943Shreyas Chavan, Kalyan Boyina, Kirk Fortelka, Maury Lira,Peter Sokalski, Deokgeun Park, Nenad Miljkovic, Universityof Illinois at Urbana-Champaign, Urbana, IL, United States

Water Vapor Condensation on Bi-Conductive SurfacesPoster Presentation. IMECE2018-87081Moonkyung Kim, Xiao Yan, Sean Ebihara, Irene Andsager,Nenad Miljkovic, University of Illinois at Urbana-Champaign,Urbana, IL, United States


124

Flow Visualization of Microscale Effusion and TranspirationCooling on Semi-Cylinder for Gas Turbine CoolingApplicationTechnical Presentation. IMECE2018-87257Dong Hwan Shin, Seongsik Moon, Jin Sub Kim, Do WonKang, Jeong Lak Sohn, Jungho Lee, Korea Institute ofMachinery & Materials, Deajeon, Korea (Republic)

Visualization of Two-phase Bursting Flow inside the EntireThermosyphon at Different Filling RatiosTechnical Presentation. IMECE2018-87269Yeonghwan Kim, Dong Hwan Shin, Jin Sub Kim, KoreaInstitute of Machinery & Materials, Deajeon, Korea (Republic),Seung M. You, The University of Texas at Dallas, Richardson,TX, United States, Jungho Lee, Korea Institute of Machinery &Materials, Deajeon, Korea (Republic)

Dropwise Condensation of Ethanol on Lubricant-InfusedSurfacesPoster Presentation. IMECE2018-87283Soumyadip Sett, Longnan Li, Kalyan Boyina, PeterSokalski, Xiao Yan, Nenad Miljkovic, University of Illinois atUrbana-Champaign, Urbana, IL, United States

Visualization Study on Hydrodynamics and MaterialDeformation of Zirconium Wire by Transient Pool BoilingPoster Presentation. IMECE2018-87287Jun-young Kang, SeungHyun Hong, Byong-Guk Jeon, YongSeok Choi, Seok Cho, Jong-Kuk Park, Sang-Ki Moon,Korea Atomic Energy Research Institute, Daejeon, Korea(Republic)

Cicada-Inspired Self-Cleaning Superhydrophobic SurfacesPoster Presentation. IMECE2018-87924Junho Oh, Sabrina Yin, Shreyas Chavan, Catherine Dana,University of Illinois at Urbana-Champaign, Urbana, IL, UnitedStates, Sungmin Hong, Jessica Roman, Kyoo Jo, Donald M.Cropek, Army Construction Engineering Research Laboratory,Champaign, IL, United States, Marianne Alleyne, NenadMiljkovic, University of Illinois at Urbana-Champaign, Urbana,IL, United States

Visualization of Droplet Nucleation on Patterned HybridSurfacesPoster Presentation. IMECE2018-88092Muhammad Jahidul Hoque, Seok Kim, Nenad Miljkovic,University of Illinois at Urbana-Champaign, Urbana, IL, UnitedStates

Visualizing Confined Boiling of Self-Assembled LiquidBridges for Electronics CoolingTechnical Presentation. IMECE2018-88922Thomas Foulkes, Shreyas Chavan, Junho Oh, University ofIllinois at Urbana-Champaign, Urbana, IL, United States,Robert Pilawa, University of California, Berkeley, Berkeley, CA,United States, Nenad Miljkovic, University of Illinois atUrbana-Champaign, Urbana, IL, United States

10-60 PROF. FRANK KREITH MEMORIALSYMPOSIUM: ADVANCES IN HEATTRANSFER, ENERGY SYSTEMS &SUSTAINABILITY10-60-1 Prof. Frank Kreith Memorial Symposium:Advances in Heat Transfer, Energy Systems &Sustainability – IThird Floor, David L. Lawrence Convention Center, Room 324

9:45am–11:30am

Session Chair: Raj M. Manglik, University of Cincinnati,Cincinnati, OH, United States

Session Co-Chairs: Satwindar Sadhal, University of SouthernCalifornia, Los Angeles, CA, United States, John Maulbetsch,Maulbetsch Consulting, Menlo Park, CA, United States

9:45am – Sunrise Delayed but the Sun Shines Brightly: The Legacy of Professor Frank KreithTechnical Presentation. IMECE2018-86304Raj M. Manglik, University of Cincinnati, Cincinnati, OH,United States

10:06am – Thirst for Power: Energy, Water and HumanSurvivalTechnical Presentation. IMECE2018-86320Michael E. Webber, University of Texas at Austin, Austin, TX,United States

10:27am – Multi-Scale Modeling of Power PlantPerformance Enhancement Using Asynchronous ThermalStorage and Heat RejectionTechnical Paper Publication. IMECE2018-88107Lauren B. Gagnon, Dre Helmns, Van P. Carey, University ofCalifornia, Berkeley, Berkeley, CA, United States

10:48am – How Long is the Lull? Supply and DemandResponses to Wind and Solar VariabilityTechnical Presentation. IMECE2018-89623Robert Socolow, Princeton University, Princeton, NJ, UnitedStates

11:09am – Bringing Solar Hot Water to a Navajo School inBreadsprings, New Mexico Using CPC StationaryConcentratorsTechnical Presentation. IMECE2018-90055Joseph J. O’Gallagher, Alternative Energy Solutions,Flossmoor, IL, United States, Roland Winston, University ofCalifornia, Merced, Merced, CA, United States


125

10-4 K6-3 HEAT TRANSFER ANALYSIS INWASTE HEAT RECOVERY SYSTEMS10-4-1 System AnalysisThird Floor, David L. Lawrence Convention Center, Room 323

1:45pm–3:30pm

Session Chair: Alexander Rattner, Pennsylvania StateUniversity, University Park, PA, United States

1:45pm – Thermodynamic Analysis and Multi-ObjectiveOptimizations of a Combined Recompression sCO2

Brayton Cycle: tCO2 Rankine Cycles for Waste HeatRecoveryTechnical Paper Publication. IMECE2018-86844Ali Alsagri, University of Dayton, Beavercreek, OH, UnitedStates, Andrew Chiasson, Ahmad A. Aljabr, University ofDayton, Dayton, OH, United States

2:06pm – Simple Analytic Model for Optimally SizingThermoelectric Generator Module ArraysTechnical Presentation. IMECE2018-87145Alexander Rattner, Pennsylvania State University, UniversityPark, PA, United States

2:27pm – Efficiency Improvement in Small InternalCombustion Engine Using Exhaust Heat Recovery SystemTechnical Paper Publication. IMECE2018-87565Shashank Rai, Selin Arslan, Lawrence TechnologicalUniversity, Southfield, MI, United States, Badih Jawad,Lawrence Technological University, Dearborn Heights, MI,United States

2:48pm – Uniquely Designed Solar Tube in a Natural/ForcedMini-Water Heating SystemTechnical Paper Publication. IMECE2018-86896Amanie Abdelmessih, California Baptist University, DiamondBar, CA, United States, Siddiq/S.S. Mohammed, CaliforniaBaptist University, Riverside, CA, United States

3:09pm – Performance Prediction Modeling of a Full-ScaleElectrostatic PrecipitatorTechnical Presentation. IMECE2018-89748Abu Nayem Md. Asraf Siddiquee, Arkansas State University,Jonesboro, AR, United States, Kwangkook Jeong, ArkansasState University, State University, AR, United States, ShinkuLee, Eungchul Lee, Doosan Heavy Industries & ConstructionCo. Ltd., Gyeongnam, Korea (Republic)

10-20 K8-6 PANEL ON FUNDAMENTALS OFNON-EQUILIBRIUM TRANSPORT (JOINTWITH K9)10-20-1 Panel on Fundamentals of Non-EquilibriumTransportThird Floor, David L. Lawrence Convention Center, Room 326

1:45pm–3:30pm

Session Chair: Yan Wang, University of Nevada, Reno, Reno,NV, United States

Session Co-Chair: Xiulin Ruan, Purdue University, WestLafayette, IN, United States

1:45pm – Non-Equilibrium Transport in Two-DimensionalMaterialsPanel Presentation. IMECE2018-90005Xianfan Xu, Purdue University, West Lafayette, IN, UnitedStates

2:06pm – Optical Generation and Detection of Non-Equilibrium Phonons and MagnonsPanel Presentation. IMECE2018-90032Li Shi, University of Texas, Austin, TX, United States

2:27pm – Role of Ballistic Electron Transport and Electron-Injection on thermal Conductance Across Metal/Non-MetalInterfacesPanel Presentation. IMECE2018-90063Patrick E. Hopkins, University of Virginia, Charlottesville, VA,United States

2:48pm – A Multi-Temperature Model for Non-EquilibriumThermal TransportPanel Presentation. IMECE2018-90058Xiulin Ruan, Purdue University, West Lafayette, IN, UnitedStates

10-21 K9-1 THERMAL TRANSPORT ACROSSHARD/SOFT INTERFACES10-21-2 K9-1 Thermal Transport Across Hard/SoftInterfaces – IIThird Floor, David L. Lawrence Convention Center, Room 325

1:45pm–3:30pm

Session Chair: Bladimir Ramos, Pennsylvania State University,University Park, PA, United States

Session Co-Chair: Hasan Babaei, University of Pittsburgh,Carnegie Mellon University, Pittsburgh, PA, United States

1:45pm – Prediction of Spectral Contribution to ThermalBoundary Conductance Between Dissimilar MaterialsExhibiting Extreme Interfacial Bond StrengthsTechnical Presentation. IMECE2018-87554James Moughamian, William Yorgason, Nicholas Roberts,Utah State University, Logan, UT, United States


126

2:06pm – Heat Transfer Across Crystalline and AmorphousSilicon Surfaces in Contact With Water and the Effects ofthe Interfacial Liquid StructuringTechnical Paper Publication. IMECE2018-86497Luis E. Paniagua-Guerra, C. Ulises Gonzalez-Valle,Pennsylvania State University, State College, PA, UnitedStates, Bladimir Ramos, Pennsylvania State University,University Park, PA, United States

2:27pm – Interfacial Heat Transfer Between Erythritol andXylitol Crystals as a Mixture Heat Storage MaterialTechnical Paper Publication. IMECE2018-87195Biao Feng, Liwu Fan, Zhejiang University, Hangzhou,Zhejiang, China

2:48pm – Heat Transfer Across 3C-SiC-Water Interfaces:Solid-Liquid Affinity, Interfacial Structuring, and SpectralCharacteristicsTechnical Presentation. IMECE2018-88890C. Ulises Gonzalez-Valle, Pennsylvania State University, StateCollege, PA, United States, Bladimir Ramos, PennsylvaniaState University, University Park, PA, United States

3:09pm – TX-100 Capped Iron Oxide NanoparticleTransformation and Implications for Induction Heating andHyperthermia TreatmentTechnical Presentation. IMECE2018-87556Hayden Carlton, David Huitink, University of Arkansas,Fayetteville, AR, United States

10-40 K15-1 TRANSPORT PHENOMENA INMANUFACTURING AND MATERIALSPROCESSING10-40-1 K15-1 Transport Phenomena inManufacturing and Materials Processing – IThird Floor, David L. Lawrence Convention Center, Room 327

1:45pm–3:30pm

Session Chair: Patrick Mensah, Southern University, BatonRouge, LA, United States

Session Co-Chair: Stephen Akwaboa, Southern Universityand A&M College, Baton Rouge, LA, United States

1:45pm – Defects Evaluation of Selective Laser MeltingStainless Steel 316 Parts Using Positron AnnihilationLifetime MeasurementTechnical Paper Publication. IMECE2018-86729Hong Yao, Louisiana State University, Baton Rouge, LA,United States, Ryan Katona, University of Virginia,Charlottesville, VA, United States, Jianren Zhou, LouisianaState University, Baton Rouge, LA, United States, Md. Islam,Louisiana State University, Baton Rouge, LA, United States,Jonathan Raush, ULL, Lafayette, LA, United States,Fengyuan Lu, Shengmin Guo, Louisiana State University,Baton Rouge, LA, United States

2:06pm – Scale Up of Powder Flow and Heat Transfer inRotary KilnsTechnical Presentation. IMECE2018-89951Bereket Yohannes, Anna Nachtigal, William Borghard,Fernando Muzzio, Benjamin Glasser, Alberto Cuitino,Rutgers University, Piscataway, NJ, United States

2:27pm – Phase Evolution and Corrosion Performance ofLaser Processed Oxide Dispersion Strengthened FerriticAlloysTechnical Paper Publication. IMECE2018-86736Ali Hemmasian Ettefagh, Hao Wen, Fengyuan Lu, ShengminGuo, Louisiana State University, Baton Rouge, LA, UnitedStates

2:48pm – Atomistic Modeling of Ga Doping of Crystalline Siby Focused Ion BeamTechnical Presentation. IMECE2018-89933Srilok Srinivasan, Iowa State University, Ames, IA, UnitedStates, Ganesh Balasubramanian, Lehigh University,Bethlehem, PA, United States, Zayd Leseman, Kansas StateUniversity, Manhattan, KS, United States

10-54 K20-4 METHODS INCOMPUTATIONAL HEAT TRANSFER10-54-1 Methods in Computational Heat TransferFourth Floor, David L. Lawrence Convention Center, Room 404

1:45pm–3:30pm

Session Chair: Cheng-xian Lin, Florida International University,Miami, FL, United States

Session Co-Chair: Xiuling Wang, Purdue University Northwest,Hammond, IN, United States

1:45pm – Effects of Vacancy Cluster Defects on PhononTransport of the Phase Change Material GeTe Using aNeural Network Interatomic PotentialTechnical Presentation. IMECE2018-89390Ruiqiang Guo, Sangyeop Lee, University of Pittsburgh,Pittsburgh, PA, United States

2:06pm – A Transient Approach to Determine Heat SourceStrength and Location in a Wall PlumeTechnical Presentation. IMECE2018-89809Ardeshir Bangian Tabrizi, Rutgers University, New Brunswick,NJ, United States, Yogesh Jaluria, Rutgers University,Piscataway, NJ, United States

2:27pm – Applying a Radiative Heat Transfer Finite-VolumeMethodology to a Geometrically Complex FurnaceTechnical Paper Publication. IMECE2018-86831Georgios Lygidakis, Stavros Leloudas, Ioannis Nikolos,Technical University of Crete, Chania, Greece

2:48pm – An Integrated Method of FVM and SPH forTreating Melting Process of Quartz IngotTechnical Paper Publication. IMECE2018-86113Zhongyi Liu, Jing Wang, Qianli Ma, Haisheng Fang,Huazhong University of Science & TChina


127

3:09pm – Heat Transfer Enhancement in Wavy Micro-Channels Through Multiharmonic SurfacesTechnical Paper Publication. IMECE2018-86425Justin Moon, California State University, Los Angeles, LosAngeles, CA, United States, J. Rafael Pacheco, SAP AmericaInc., Tempe, AZ, United States, Arturo Pacheco-Vega,California State University, Los Angeles, Los Angeles, CA,United States

10-60 PROF. FRANK KREITH MEMORIALSYMPOSIUM: ADVANCES IN HEATTRANSFER, ENERGY SYSTEMS &SUSTAINABILITY10-60-2 Prof. Frank Kreith Memorial Symposium:Advances in Heat Transfer, Energy Systems &Sustainability – IIThird Floor, David L. Lawrence Convention Center, Room 324

1:45pm–3:30pm

Session Chair: Satwindar Sadhal, University of SouthernCalifornia, Los Angeles, CA, United States

Session Co-Chairs: John Maulbetsch, Maulbetsch Consulting,Menlo Park, CA, United States, Raj M. Manglik, University ofCincinnati, Cincinnati, OH, United States

1:45pm – Recent Advances in Thermal Energy StorageUsing Phase Change MaterialsTechnical Presentation. IMECE2018-88900D. Yogi Goswami, University of South Florida, Tampa, FL,United States

2:06pm – Experimental and Economic Evaluation of SomePromising Flat Plate Solar CollectorsTechnical Presentation. IMECE2018-88779Noam Lior, University of Pennsylvania, Philadelphia, PA,United States

2:27pm – Future Scenarios for Emissions From Energy andPower Production in the Rocky Mountain RegionTechnical Paper Publication. IMECE2018-87614Rene Nsanzineza, Jana Milford, University of ColoradoBoulder, Boulder, CO, United States

2:48pm – Near Term Prospects for Solar Syngas andHydrogenTechnical Presentation. IMECE2018-89758Jane Davidson, University of Minnesota, Wayzata, MN, UnitedStates

3:09pm – Forced Convection in High Porosity Metal Foamsin a Square Duct in Presence of an Array of Impinging JetsTechnical Presentation. IMECE2018-88939Roop Mahajan, Virginia Tech, Blacksburg, VA, United States,Prashant Singh, North Carolina State University, Raleigh, NC,United States

10-6 K6-5 THERMAL MANAGEMENT OFBATTERY SYSTEMS10-6-1 BatteriesThird Floor, David L. Lawrence Convention Center, Room 325

3:45pm–5:30pm

Session Chair: Leitao Chen, Rice University, Houston, TX,United States

Session Co-Chair: Laura Schaefer, Rice University, Houston,TX, United States

3:45pm – In Situ Characterization of the Thermal, Ionic, andMechanical Behaviors of Lithium Ion Batteries forAdvanced Thermal ManagementTechnical Presentation. IMECE2018-86049Yongjie Hu, Joon Sang Kang, Ming Ke, University ofCalifornia, Los Angeles, Los Angeles, CA, United States

4:06pm – 3D-Printed PCM/HDPE Composites for BatteryThermal ManagementTechnical Paper Publication. IMECE2018-86081Thomas Freeman, Embry-Riddle Aeronautical University,Carthage, NC, United States, Kaloki Nabutola, David Spitzer,Patrick Currier, Sandra Boetcher, Embry-Riddle AeronauticalUniversity, Daytona Beach, FL, United States

4:27pm – A Comprehensive Parametric Study ofMinichannel Based Liquid Cooling of Li-Ion Battery PackTechnical Paper Publication. IMECE2018-87923Zhoujian An, Krishna Shah, University of California, Merced,CA, United States, Yanbao Ma, University of California,Merced, Merced, CA, United States, Jia Li, Beijing JiaotongUniversity, Beijing, China

4:48pm – Development of a Nine-Cell Hybrid Heat Sink forThermal Management of Hot-Spots—ConcentratedPhotovoltaic ApplicationsTechnical Presentation. IMECE2018-88839Ibrahim Hassan, Ahmad Almomani, Danish Rahman, Aziz Rahman, Texas A&M University at Qatar, Doha, Qatar,Yasser Al Hamidi, Texas A&M University, College Station, TX,United States


128

10-8 K6-7 HEAT TRANSFER IN PASSIVETHERMAL CONTROL SYSTEMS10-8-1 Heat Transfer in Passive Thermal ControlSystemsThird Floor, David L. Lawrence Convention Center, Room 327

3:45pm–5:30pm

Session Chair: Rydge Mulford, Brigham Young University,Provo, UT, United States

3:45pm – A 1-kW Day-and-Night Radiative Cooling Systemfor Cold Water GenerationTechnical Presentation. IMECE2018-88495Ablimit Aili, Dongliang Zhao, Yao Zhai, Jiatao Lu, DillonKidd, Nicolas Seitz, Alexander Savage, University ofColorado Boulder, Boulder, CO, United States, Gang Tan,University of Wyoming, Laramie, WY, United States, XiaoboYin, Ronggui Yang, University of Colorado Boulder, Boulder,CO, United States

4:06pm – Dynamic Temperature Control via Actuation of aDeployable/Retractable RadiatorTechnical Presentation. IMECE2018-88891Rydge Mulford, Lance Hyatt, Samuel Salt, Ernest Lee,Brigham Young University, Provo, UT, United States, VivekDwivedi, NASA Goddard, Greenbelt, MD, United States,Matthew R. Jones, Brian D. Iverson, Brigham YoungUniversity, Provo, UT, United States

4:27pm – Sub-Ambient Passive Daytime Radiative CoolingUsing a Directional ApproachTechnical Presentation. IMECE2018-89481Bikram Bhatia, Arny Leroy, Yichen Shen, Lin Zhao, MelissaGianello, Duanhui Li, Tian Gu, Juejun Hu, Marin Soljacic,Evelyn Wang, Massachusetts Institute of Technology,Cambridge, MA, United States

4:48pm – The Solid-State Electrocaloric Refrigeration WithUnimorph Beam and Its Analytical ModelTechnical Paper Publication. IMECE2018-88634Zhimin Sun, Qing-Ming Wang, William Slaughter, Universityof Pittsburgh, Pittsburgh, PA, United States

5:09pm – Device-Level Thermodynamic Model for anElectrocaloric CoolerTechnical Presentation. IMECE2018-86433Jie Gong, Alan McGaughey, Carnegie Mellon University,Pittsburgh, PA, United States

10-22 K9-2 COUPLED THERMALTRANSPORT BY ELECTRONS, MAGNONS,AND PHONONS10-22-1 K9-2 Coupled Thermal Transport byElectrons, Magnons, and PhononsThird Floor, David L. Lawrence Convention Center, Room 326

3:45pm–5:30pm

Session Chair: Tengfei Luo, University of Notre Dame, NotreDame, IN, United States

Session Co-Chair: Ruiqiang Guo, Caltech, Pasadena, CA,United States

3:45pm – Crystalline Polymer Nanofibers With Ultra-HighThermal Conductivity and StrengthInvited Presentation. IMECE2018-89242Sheng Shen, Carnegie Mellon University, Pittsburgh, PA,United States

4:27pm – Magnon and Phonon Dispersion, Lifetime andThermal Conductivity of Iron From Spin-Lattice DynamicsSimulationsTechnical Presentation. IMECE2018-86297Xufei Wu, Zeyu Liu, Tengfei Luo, University of Notre Dame,Notre Dame, IN, United States

4:48pm – Atomistic Simulations of Phononic and MagnonicThermal Transport in Magnetic MaterialsTechnical Presentation. IMECE2018-88860Yanguang Zhou, University of California, Los Angeles, LosAngeles, CA, United States, Julien Tranchdia, Sandia NationalLaboratories, Albuquerque, NM, United States, Yijun Ge,Timothy S. Fisher, Jayathi Murthy, University of California,Los Angeles, Los Angeles, CA, United States

5:09pm – Tuning Electronic Heat Transport inGraphene/Metal Heterostructures With Ultralow ThermalConductivityTechnical Presentation. IMECE2018-89400Bin Huang, Weidong Zheng, Yee Kan Koh, NationalUniversity of Singapore, Singapore, Singapore

10-32 K11-1 CMS—COMBUSTION POWERSYSTEMS10-32-1 CMS—Combustion Power SystemThird Floor, David L. Lawrence Convention Center, Room 323

3:45pm–5:30pm

Session Chair: Omid Askari, Mississippi State University,Mississippi State, MS, United States

3:45pm – An Integrated Design for a Portable MethanolFuel Microcombustion-Thermoelectric Coupled PowerDeviceTechnical Presentation. IMECE2018-88186Bhanu Prakash Reddy Guggilla, Alexander Rusted, BruceBarrett, Ryan Moran, Navroop Kaur, Smitesh Bakrania,Rowan University,


129

4:06pm – Automated Engine Calibration Optimization UsingOnline Extremum SeekingTechnical Paper Publication. IMECE2018-87911Ripudaman Singh, Andrew Mansfield, MargaretWooldridge, University of Michigan, Ann Arbor, MI, UnitedStates

4:27pm – Characteristics of a Non-Premixed RotatingDetonation Combustor Using Natural Gas-Hydrogen Blendat Elevated Air-Preheat Temperature and BackpressureTechnical Paper Publication. IMECE2018-88569Arnab Roy, Donald Ferguson, Todd Sidwell, Peter Strakey,National Energy Technology Laboratory, Morgantown, WV,United States

4:48pm – Micro Combustor Development Using Hydrogenas FuelTechnical Paper Publication. IMECE2018-88659Ronak Shah, ADIT, Anand, Gujarat, India, DigvijayKulshreshtha, Nisarg Chaudhari, C K Pithawala College ofEngineering and Technology, Surat, Gujarat, India

5:09pm – Performance and Emissions Analysis of PartiallyPre-Mixed Charge Compression Ignition CombustionTechnical Paper Publication. IMECE2018-86410Charu V. Srivatsa, Jonathan Mattson, Christopher Depcik,University of Kansas, Lawrence, KS, United States

10-42 K16-1: HEAT TRANSFER INELECTRONIC EQUIPMENT10-42-1 K16-1: Heat Transfer in ElectronicEquipment – IFourth Floor, David L. Lawrence Convention Center, Room 404

3:45pm–5:30pm

Session Chair: Seungbae Park, Binghamton University,Binghamton, NY, United States

Session Co-Chair: Hendrik PJ De Bock, GE Global Research,Schenectady, NY, United States

3:45pm – Two-Wavelength Thermoreflectance and ItsApplication in Temperature Measurement of Micro-Electronic DevicesTechnical Paper Publication. IMECE2018-87989Hongjie Zhang, Sy-Bor Wen, Texas A&M University, CollegeStation, TX, United States

4:06pm – Experimental Evaluation of a Dual Taper Manifoldin a Thermosiphon Loop for Data Center ApplicationTechnical Presentation. IMECE2018-88799Aranya Chauhan, Satish Kandlikar, Rochester Institute ofTechnology, Rochester, NY, United States

4:27pm – Heat Transfer Analysis of a High CapacityThermal BatteryTechnical Presentation. IMECE2018-89187Mun Goung Jeong, KAIST, Daejeon, Korea (Republic), Jang-Hyeon Cho, Agency for Defense Development, Daejeon,Korea (Republic), Bong Jae Lee, KAIST, Daejeon, Korea(Republic)

4:48pm – Temperature Measurement of M.2 NVMe SolidState Drive Using Infrared ThermometryTechnical Presentation. IMECE2018-89153Eung Chang Lee, Jinsung Rho, KAIST, Daejeon, Korea(Republic), Heeyoub Kang, Samsung Electronics, Suwon,Korea (Republic), Bong Jae Lee, KAIST, Daejeon, Korea(Republic)

5:09pm – Constructal Design Development in ChinaTechnical Presentation. IMECE2018-88892Lingen Chen, Naval University of Engineering, Wuhan, China

10-60 PROF. FRANK KREITH MEMORIALSYMPOSIUM: ADVANCES IN HEATTRANSFER, ENERGY SYSTEMS &SUSTAINABILITY10-60-3 Prof. Frank Kreith Memorial Symposium:Advances in Heat Transfer, Energy Systems &Sustainability – IIIThird Floor, David L. Lawrence Convention Center, Room 324

3:45pm–5:30pm

Session Chair: John Maulbetsch, Maulbetsch Consulting,Menlo Park, CA, United States

Session Co-Chairs: Satwindar Sadhal, University of SouthernCalifornia, Los Angeles, CA, United States, Raj M. Manglik,University of Cincinnati, Cincinnati, OH, United States

3:45pm – Toward Optimal Operation of Thermal SystemsTechnical Presentation. IMECE2018-88920Yogesh Jaluria, Rutgers University, Piscataway, NJ, UnitedStates

4:06pm – Challenges in the Heat and Mass TransferAspects of Comfort Cooling: Separating Sensible andLatent Loads—Material Constraints and New OpportunitiesTechnical Presentation. IMECE2018-86719William Worek, Texas A&M University - Kingsville, CorpusChristi, TX, United States

4:27pm – Interdisciplinary Network of SustainableEngineering and Its Application to Built EnvironmentTechnical Presentation. IMECE2018-88789Cem Keskin, M. Pinar Menguc, Ozyegin University, Istanbul,Turkey

4:48pm – Improvements in Distributed Power Generationand Waste Heat Recovery (Including Data Center Cooling)Based on Significantly Reduced Air-Side ThermalResistances and Enhanced Flow-BoilingTechnical Presentation. IMECE2018-86344Amitabh Narain, Michigan Tech University, Houghton, MI,United States, Vibhu Vivek, Vivek Technologies LLC, SantaClara, CA, United States, Hrishikesh Ranga Prasad, NikhilShinde, Soroush Sepahyar, Michigan TechnologicalUniversity, Houghton, MI, United States


130

5:09pm – Array Jet Impingement Onto High Porosity ThinMetal Foams at Zero Jet-to-Foam SpacingTechnical Paper Publication. IMECE2018-87915Prashant Singh, North Carolina State University, Raleigh, NC,United States, Mingyang Zhang, Jaideep Pandit, RoopMahajan, Virginia Polytechnic Institute & State University,Blacksburg, VA, United States


10-64 HEAT TRANSFER AND THERMALENGINEERING PLENARIES10-64-1 Heat Transfer and Thermal EngineeringPlenary IThird Floor, David L. Lawrence Convention Center, Room 306

8:00am–8:45am

8:00am – Multiscale Modeling of Nanoparticle Transport:Applications to Targeted DrugPlenary Presentation. IMECE2018-90102Portonovo Ayyaswamy, University of Pennsylvania,Philadelphia, PA, United States

10-64 HEAT TRANSFER AND THERMALENGINEERING PLENARIES10-64-2 Heat Transfer and Thermal EngineeringPlenary IIThird Floor, David L. Lawrence Convention Center, Room 306

9:00am–9:45am

9:00am – Aerospace Thermal Management: Challenges andOpportunitiesPlenary Presentation. IMECE2018-90103Andrew Bicos, Boeing Co., Huntington Beach, CA, UnitedStates

10-7 K6-6 RADIATIVE HEAT TRANSFERAND RADIATIVE PROPERTIES OF ENERGYSYSTEMS10-7-1 Analysis of RadiativeTransfer in EnergySystemsThird Floor, David L. Lawrence Convention Center, Room 321

10:00am–11:45am

Session Chair: Matthew R. Jones, Brigham Young University,Provo, UT, United States

10:00am – Design and Evaluation of the Fresnel-LensBased Solar Concentrator System Through a Statistical-Algorithmic ApproachTechnical Paper Publication. IMECE2018-87023Hassan Qandil, Weihuan Zhao, University of North Texas,Denton, TX, United States

10:21am – Non-Gray Radiation Exchange: The InternalFractional Function ReconsideredTechnical Paper Publication. IMECE2018-86386John Lienhard V, Massachusetts Institute of Technology,Cambridge, MA, United States

10:42am – Radiation Characterization of Packed BedsUsing Artificial Neural NetworksTechnical Presentation. IMECE2018-89013Hynn Hee Kang, Shima Hajimirza, TCollege Station, TX, United States

TRACK 10 HEAT TRANSFER AND THERMAL ENGINEERING – MONDAY, NOVEMBER 12 / TUESDAY, NOVEMBER 13

131

11:03am – Orthogonal Function Extension to the HottelZone MethodTechnical Presentation. IMECE2018-88771Daniel Wanegar, Ofodike Ezekoye, University of Texas,Austin, TX, United States

11:24am – Uncertainty in Optical Particulate CountersTechnical Presentation. IMECE2018-87781Jared Blanchard, Jacob Thomas, Nicholas J. Wallace,Connan Wu, Randy S. Lewis, Matthew R. Jones, BrighamYoung University, Provo, UT, United States

10-15 K8-1 FUNDAMENTALS OF BOILINGAND CONDENSATION – I10-15-1 Fundamentals of Boiling and EvaporationThird Floor, David L. Lawrence Convention Center, Room 320

10:00am–11:45am

Session Chair: Vijay Dhir, University of California, Los Angeles,Los Angeles, CA, United States

Session Co-Chairs: Diana-Andra Borca-Tasciuc, RensselaerPolytech Institute, Troy, NY, United States, C. ThomasAvedisian, Cornell University, ithaca, NY, United States

10:00am – Mechanism Interaction During DropletEvaporation on Nanostructured Hydrophilic SurfacesTechnical Paper Publication. IMECE2018-87991Van P. Carey, University of California, Berkeley, CA, UnitedStates, Claire K. Wemp, University of California, San Jose, CA,United States, Emma R. McClure, Samuel Cabrera,University of California, Berkeley, CA, United States

10:21am – Nanoscale Wetting and Energy Transmission atSolid-Liquid InterfacesTechnical Presentation. IMECE2018-89801John A. Tomko, Ashutosh Giri, David Olson, John Gaskins,University of Virginia, Charlottesville, VA, United States, SeanO’Malley, Rutgers University, Camden, NJ, United States,Patrick E. Hopkins, University of Virginia, Charlottesville, VA,United States

10:42am – Origin and Evolution of Microlayer in a VaporBubble During Pool BoilingTechnical Presentation. IMECE2018-88965An Zou, Manish Gupta, Shalabh Maroo, Syracuse University,Syracuse, NY, United States

11:03am – Simulation of Nucleate Boiling With InterfacialTemperature Gradients and Sharp InterfaceTechnical Paper Publication. IMECE2018-87998Satish Kandlikar, Isaac Perez-Raya, Rochester Institute ofTechnology, Rochester, NY, United States

11:24am – Role and Enhancement of Micro-Nucleation inAnnular Flow-BoilingTechnical Presentation. IMECE2018-86343Amitabh Narain, Patcharapol Gorgitrattanagul, MichiganTechnological University, Houghton, MI, United States,Ritunesh Kumar, Indian Institute of Technology, Indore, India,Hrishikesh Ranga Prasad, Sunil Mehendale, SoroushSepahyar, Michigan Technological University, Houghton, MI,United States

10-23 K9-3 PHONONIC CRYSTALS ANDTHERMOELECTRICS10-23-1 K9-3 Phononic Crystals andThermoelectrics – IThird Floor, David L. Lawrence Convention Center, Room 330

10:00am–11:45am

Session Chair: Yanliang Zhang, University of Notre Dame,Notre Dame, IN, United States

Session Co-Chair: Tianli Feng, Vanderbilt University/OakRidge National Laboratory, Oak Ridge, TN, United States

10:00am – Lattice Thermal Conductivity of NanostructuredThermoelectric MaterialsTechnical Presentation. IMECE2018-87177Bo Fu, Guihua Tang, Xi’an Jiaotong University, Xi’an, Shaanxi,China

10:21am – Thermal and Thermoelectric Transport inAdditive Printed Nanostructured Flexible ThermoelectricFilmsTechnical Presentation. IMECE2018-87729Yanliang Zhang, University of Notre Dame, Notre Dame, IN,United States, Tony Varghese, Boise State University, Boise,ID, United States, Nick Kempf, Mortaza Saeidi-Javash,University of Notre Dame, Notre Dame, IN, United States

10:42am – Interatomic Potential Development for ThermalConductivity Prediction Of Materials: The Complex BinaryCompound Sb2Te3

Technical Presentation. IMECE2018-88650Prabudhya Roy Chowdhury, Purdue University, WestLafayette, IN, United States, Tianli Feng, VanderbiltUniversity/Oak Ridge National Laboratory, Oak Ridge, TN,United States, Xiulin Ruan, Purdue University, West Lafayette,IN, United States

11:03am – Thermoelectric Transport in Bismuth TellurideNanoribbon With Surface Protection by Organic MoleculeCoatingTechnical Presentation. IMECE2018-89557Wei Wu, Michael Pettes, University of Connecticut, Storrs, CT,United States

TRACK 10 HEAT TRANSFER AND THERMAL ENGINEERING – TUESDAY, NOVEMBER 13

132

11:24am – Thermal Conductivity in CdO Modulation-DopedSingle Lattice Films (MoDSiLFs)Technical Presentation. IMECE2018-89890Elizabeth Radue, University of Virginia, Charlottesville, VA,United States, Evan L. Runnerstrom, NCSU, Raleigh, NC,United States, Christina M. Rost, University of Virginia,Charlottesville, VA, United States, Brian F. Donovan, U.S.Naval Academy, Annapolis, MD, United States, Everett D.Grimley, James M. LeBeau, NCSU, Raleigh, NC, UnitedStates, Jon-Paul Maria, Pennsylvania State University,University Park, PA, United States, Patrick Hopkins, Universityof Virginia, Charlottesville, VA, United States

10-33 K11-2 CMS- SPRAYS AND EMISSIONS10-33-1 CMS—Sprays and EmissionsThird Floor, David L. Lawrence Convention Center, Room 326

10:00am–11:45am

Session Chair: Mohsen Ghamari, Wilkes University, Wilkes-Barre, PA, United States

Session Co-Chair: Mohsen Ayoobi, Wayne State University,Detroit, MI, United States

10:00am – Cubic Formula for Determination of the DropSize During Atomization of Liquid Jets in Co- and Cross-Flow of AirTechnical Paper Publication. IMECE2018-86372Taewoo Lee, Jung Eun Park, Arizona State University, Tempe,AZ, United States, Ryoichi Kurose, Kyoto University, Kyoto,Japan

10:21am – Nitrogen-Bearing Emissions From Combustionof Raw and Torrefied Corn Straw in a Fixed-Bed ReactorTechnical Paper Publication. IMECE2018-86612Xiaohan Ren, Shandong University, Jinan, Shandong, China,Emad Rokni, Northeastern University, Brookline, MA, UnitedStates, Yu Liu, Zheng Cui, Shandong University, Jinan,Shandong, China, Yiannis Levendis, Northeastern University,Boston, MA, United States

10:42am – Influence of Injection Angle on PollutantEmissions and Combustion Temperature on a CFM56-3EngineTechnical Paper Publication. IMECE2018-87353Pedro C. Moreira, Universidade da Beira Interior, Covilhã,Portugal, Francisco Brojo, Universidade da Beira Interior,Beira, Portugal

11:03am – Preliminary Development of a MeasurementStandard Using a Research Simplex AtomizerTechnical Paper Publication. IMECE2018-87940Scott Leask, Alice Li, Vincent McDonell, Scott Samuelsen,University of California, Irvine, CA, United States

11:24am – Thermal Conductivity of Colloidal Suspensionsof Jet Fuel and Carbon-Based Nanoparticles and Its Effecton Evaporation RateTechnical Paper Publication. IMECE2018-88618Mohsen Ghamari, Ahmed Aboalhamayie, Wilkes University,Wilkes-Barre, PA, United States

10-36 K13-1 HEAT TRANSFER INMULTIPHASE SYSTEMS10-36-1 K13-1 HeatTransfer in Multiphase Systems – IFourth Floor, David L. Lawrence Convention Center, Room 406

10:00am–11:45am

Session Chair: Abhijit Mukherjee, California State UniversityNorthridge, Northridge, CA, United States

10:00am – Experimental Investigation on Heat TransferCharacteristics of Smooth Water Wall Tube of an Ultra-Supercritical CFB BoilerTechnical Paper Publication. IMECE2018-86137Wenyu Wang, Ziyu Liang, Li Wan, Dan Liu, Dong Yang, Xi’an Jiaotong University, Xi’an, China

10:21am – A Correlation for Maximum Heat Transfer toCylinders and Spheres in Gas-Fluidized BedsTechnical Paper Publication. IMECE2018-86586Mirza Mohammed Shah, Engineering Research Associates,Redding, CT, United States

10:42am – General Correlation for Heat Transfer DuringTwo-Component Gas-Liquid Flow in Horizontal PipesTechnical Paper Publication. IMECE2018-86589Mirza Mohammed Shah, Engineering Research Associates,Redding, CT, United States

11:03am – A Correlation for Heat Transfer to Two-Component Gas-Liquid Flowing in Vertical ChannelsTechnical Paper Publication. IMECE2018-86590Mirza Mohammed Shah, Engineering Research Associates,Redding, CT, United States

11:24am – CFD Analysis of Direct Contact Condensation(DCC) of Subsonic Steam Jets in a Cross-Flow of WaterUsing a Two-Fluid ModelTechnical Paper Publication. IMECE2018-87382Jayachandran K. N., Arnab Roy, Parthasarathi Ghosh,Indian Institute of Technology Kharagpur, Kharagpur, WestBengal, India

10-42 K16-1: HEAT TRANSFER INELECTRONIC EQUIPMENT10-42-2 K16-1: HeatTransfer in Electronic Equipment – IIThird Floor, David L. Lawrence Convention Center, Room 327

10:00am–11:45am

Session Chair: Seungbae Park, Binghamton University,Binghamton, NY, United States

Session Co-Chair: Hendrik PJ De Bock, GE Global Research,Schenectady, NY, United States

10:00am – Thermal Transport at Ga2O3/Metal Interfaces andBulk Ga2O3 PolymorphsTechnical Presentation. IMECE2018-86459Henry Aller, Xiaoxiao Yu, Andrew Gellman, Jonathan Malen,Alan McGaughey, CarUnited States


133

10:21am – Thermal Analysis of a Subscale Flux FocusingMagnetic GearboxTechnical Paper Publication. IMECE2018-86876Sina Modaresahmadi, Javad Khalesi, Josh Kadel, WesleyWilliams, University of North Carolina at Charlotte, Charlotte,NC, United States

10:42am – Validation and Evaluation of Turbulence Modelsin Thermal Predictions of a Small Data Center FacilityTechnical Paper Publication. IMECE2018-87479Beichao Hu, Long Phan, Cheng-Xian Lin, FloridaInternational University, Miami, FL, United States

11:03am – An Experimental Study on the Convective HeatTransfer Behavior of Diamond Nanofluids in ElectronicCooling ApplicationsTechnical Paper Publication. IMECE2018-87481Farzin Mashali, Ethan Languri, Tennessee TechnologicalUniversity, Cookeville, TN, United States, Jim Davidson, DavidKerns, FemtoScience, Nashville, TN, United States, FahadAlkhaldi, Tennessee Technological University, Cookeville, TN,United States

11:24am – Micron Variations of the Thermal Conductivity ofCopper-Tin IntermetallicsTechnical Presentation. IMECE2018-88551Matthias Daeumer, Scott Schiffres, SUNY Binghamton,Binghamton, NY, United States, Charles L. Arvin, IBM,Hopewell Junction, NY, United States

10-7 K6-6 RADIATIVE HEAT TRANSFERAND RADIATIVE PROPERTIES OF ENERGYSYSTEMS 10-7-2 Radiative PropertiesThird Floor, David L. Lawrence Convention Center, Room 321

1:45pm–3:30pm

Session Chair: Rydge Mulford, Brigham Young University,Provo, UT, United States

1:45pm – Directional Radiative Properties of ThinPolytetrafluoroethylene (PTFE) Sheets on a Silver FilmTechnical Presentation. IMECE2018-87882Peiyan Yang, Zhuomin Zhang, Chuyang Chen, GeorgiaInstitute of Technology, Atlanta, GA, United States

2:06pm – How to Make Silica Aerogel Transparent?Technical Presentation. IMECE2018-88885Tiphaine Galy, University of California, Los Angeles, LosAngeles, CA, United States, Mu Du, Guihua Tang, Xi’anJiaotong University, Xi’an, China, Laurent Pilon, University ofCalifornia, Los Angeles, Los Angeles, CA, United States

2:27pm – Selective Thermal Radiation From NanoribbonsTechnical Presentation. IMECE2018-89679Mahmoud Elzouka, Ravi Prasher, Lawrence BerkeleyNational Laboratory, Berkeley, CA, United States

2:48pm – Measurement of the Radiative Surface Propertiesof Opaque MaterialsTechnical Presentation. IMECE2018-87771Christopher Brooks, Matthew R. Jones, Brigham YoungUniversity, Provo, UT, United States

10-15 K8-1 FUNDAMENTALS OF BOILINGAND CONDENSATION ? I10-15-2 K8-1 Fundamentals of BoilingThird Floor, David L. Lawrence Convention Center, Room 320

1:45pm–3:30pm

Session Chair: Amitabh Narain, Michigan Tech University,Houghton, MI, United States

Session Co-Chair: Isaac Perez-Raya, Rochester Institute ofTechnology, Rochester, NY, United States

1:45pm – A Novel Multiscale Wick Structure for DelayedCritical Heat Flux in Microchannel Flow Boiling ProcessTechnical Presentation. IMECE2018-88292Mojtaba Hosseinnia, Sajjad Bigham, Michigan TechnologicalUniversity, Houghton, MI, United States

2:06pm – Boiling Heat Transfer on a Two-Tier CopperStructure of Nanowires and MicrogroovesTechnical Presentation. IMECE2018-88825Guanglei Chen, Calvin Hong Li, Villanova University,Villanova, PA, United States

2:27pm – Molecular Dynamics Simulation of ExplosiveBoiling on Concave Nanostructured SurfaceTechnical Paper Publication. IMECE2018-86965Pengfei Ji, Mengzhe He, Yiming Rong, Southern Universityof Science and Technology, Shenzhen, Guangdong, China,Yuwen Zhang, University of Missouri, Columbia, MO, UnitedStates, Yong Tang, South China University of Technology,Guangzhou, Guangdong, China

2:48pm – Investigation of Bubble Departure Radius inSubcooled Pool Boiling Under Microgravity ConditionTechnical Paper Publication. IMECE2018-87741Xueli Wang, Xi’an Jiaotong University, Xi’an, China, Zan Wu,Lund University, Lund, Sweden, Jinjia Wei, Xi’an JiaotongUniversity, Xi’an, China, Bengt Sunden, Lund University, Lund,Sweden

3:09pm – Multi-Fractal Analysis of Surface TemperatureTime Series to Predict the Critical Heat FluxTechnical Presentation. IMECE2018-89500Ankit Saini, Vinod Srinivasan, University of Minnesota,Minneapolis, MN, United States


134

10-23 K9-3 PHONONIC CRYSTALS ANDTHERMOELECTRICS10-23-2 K9-3 Phononic Crystals andThermoelectrics – IIThird Floor, David L. Lawrence Convention Center, Room 330

1:45pm–3:30pm

Session Chair: Tianli Feng, Vanderbilt University/Oak RidgeNational Laboratory, Oak Ridge, TN, United States

Session Co-Chair: Ruiqiang Guo, Caltech, Pasadena, CA,United States

1:45pm – Anisotropic Thermal Transport in Single-CrystalGroup-III Nitride Films Extrinsically Induced by Highly-Oriented DislocationsTechnical Presentation. IMECE2018-89505Bo Sun, National University of Singapore, Singapore,Singapore, Georg Haunschild, Technical University of Munich,Garching, Germany, Carlos Polanco, Oak Ridge NationalLaboratory, Oak Ridge, TN, United States, James (Zi-Jian) Ju,Technical University of Munich, Garching, Germany, LucasLindsay, Oak Ridge National Laboratory, Oak Ridge, TN,United States, Gregor Koblmueller, Technical University ofMunich, Garching, Germany, Yee Kan Koh, National Universityof Singapore, Singapore, Singapore

2:06pm – Probing the Lower Limit of Lattice ThermalTransport in One-Dimensional Phononic CrystalsTechnical Presentation. IMECE2018-89708Pranay Chakraborty, Lei Cao, Yan Wang, University ofNevada, Reno, Reno, NV, United States

2:27pm – Investigations of Encapsulated Phase ChangeMaterial in Boron Nitride NanotubesTechnical Presentation. IMECE2018-89778Nastaran Barhemmati-Rajab, Weihuan Zhao, University ofNorth Texas, Denton, TX, United States

2:48pm – Thermal Conductivity Measurement ofMethylammonium Lead Iodide Based Ruddlesden PopperPerovskite PhasesTechnical Presentation. IMECE2018-87814Alexander D. Christodoulides, Carnegie Mellon University,Pittsburgh, PA, United States, Peijun Guo, Argonne NationalLaboratory, Lemont, IL, United States, ConstantinosStoumpos, Mercouri G. Kanatzidis, Northwestern University,Evanston, IL, United States, Richard Schaller, ArgonneNational Laboratory/Northwestern University, Lemont, IL,United States, Jonathan Malen, Carnegie Melon University,Pittsburgh, PA, United States

10-34 K11-3 CMS- APPLIED COMBUSTION10-34-1 CMS—Applied Combustion: Modeling HeatTransfer and CombustionThird Floor, David L. Lawrence Convention Center, Room 326

1:45pm–3:30pm

Session Chair: Mehdi Esmaeilpour, Marshall University,Huntington, WV, United States

Session Co-Chair: Kris Jorgensen, A. O. Smith, Brookfield,WI, United States

1:45pm – Numerical Modeling of Water Impingement andHeat Transfer With Solid Slabs During Secondary Coolingin a Continuous CasterTechnical Paper Publication. IMECE2018-86691Haibo Ma, Kaile Tang, Purdue University Northwest CIVS,Hammond, IN, United States, Rui Liu, Michael Lowry,ArcelorMittal, East Chicago, IN, United States, Armin Silaen,Purdue University Northwest CIVS, Hammond, IN, UnitedStates, Chenn Zhou, Purdue University Calumet, Hammond,IN, United States

2:06pm – Optimization of Heat Transfer Process in aWalking Beam Reheat Furnace Using Computational FluidDynamicsTechnical Paper Publication. IMECE2018-88117Yuchao Chen, Purdue University Northwest, Hammond, IN,United States, Armin Silaen, Purdue University NorthwestCIVS, Hammond, IN, United States, Nicholas Walla, PurdueUniversity Northwest, Hammond, IN, United States, KurtJohnson, ArcelorMittal Global Research and Development,East Chicago, IN, United States, Chenn Zhou, PurdueUniversity Calumet, Hammond, IN, United States

2:27pm – CFD Modelling of NOx and Soot Formation inAluminum Anode Baking FurnaceTechnical Paper Publication. IMECE2018-88390Abdul Raouf Tajik, Khalifa University of Science andTechnology, Masdar City, Abu Dhabi, United Arab Emir., TariqShamim, University of Michigan-Flint, Flint, MI, United States,Ahmed Ghoniem, Massachusetts Institute of Technology,Cambridge, MA, United States, Rashid K. Abu Al-Rub, KhalifaUniversity of Science and Technology, Abu Dhabi, Abu Dhabi,United Arab Emir.

2:48pm – Modeling for Mineral Redistribution of CoalBlending During Pulverized Coal CombustionTechnical Paper Publication. IMECE2018-87834Md. Saifujjaman, Arkansas State University, Jonesboro, AR,United States, Kwangkook Jeong, Arkansas State University,State University, AR, United States, Shinku Lee, DoosanHeavy Industries & Construction Co., Ltd., Gyeongnam, Korea(Republic)

3:09pm – CFD Analysis of Premixed Combustion in a TwoStroke Polygon EngineTechnical Presentation. IMECE2018-89361Christian Mendez, Kevin Anderson, CaliforUniversity, Pomona, CA, United States


135

10-36 K13-1 HEAT TRANSFER INMULTIPHASE SYSTEMS10-36-2 K13-1 HeatTransfer in Multiphase Systems – IIFourth Floor, David L. Lawrence Convention Center, Room 406

1:45pm–3:30pm


1:45pm – Effect of Particle-Laden Flow on Heat TransferTechnical Presentation. IMECE2018-88005Sarah R. Masters, Michael Manahan, Jr., Pennsylvania StateUniversity, State College, PA, United States

2:06pm – Functional Coating DurabilityTechnical Presentation. IMECE2018-88110Muhammad Jahidul Hoque, Longnan Li, Nenad Miljkovic,University of Illinois at Urbana-Champaign, Urbana, IL, UnitedStates

2:27pm – Three-Dimensional Multiple-Relaxation-TimeLattice Boltzmann Simulation of Vapor Condensation onSubcooled WallTechnical Paper Publication. IMECE2018-88490Wandong Zhao, Nanchang University, Nanchang, Jiangxi,China, Ben Xu, University of Texas Rio Grande Valley,Edinburg, TX, United States, Ying Zhang, NanchangUniversity, Nanchang, Jiangxi, China

2:48pm – Temperature Profile Across Liquid-VaporInterface With Phase Change: Results From MolecularDynamics SimulationsTechnical Presentation. IMECE2018-89202Arif Rokoni, Ying Sun, Drexel University, Philadelphia, PA,United States

3:09pm – Numerical Study of Bubble Dynamics DuringNucleate Pool Boiling of NanofluidsTechnical Presentation. IMECE2018-89266Abhijit Mukherjee, Goutham Kumar Reddy Burla, CaliforniaState University Northridge, Northridge, CA, United States,Yash Jawanjal, Indian Institute of Technology Bombay,Mumbai, Maharashtra, India

10-53 K20-3 APPLICATIONS OFCOMPUTATIONAL HEAT TRANSFER10-53-1 Applications of Computational HeatTransfer: ConvectionThird Floor, David L. Lawrence Convention Center, Room 327

1:45pm–3:30pm

Session Chair: Samuel Subia, Sandia National Laboratories,Albuquerque, NM, United States

Session Co-Chair: Aaron Wemhoff, Villanova University,Villanova, PA, United States

1:45pm – Numerical Modeling for a Supercritical CO2-Liquid Sodium Hybrid Compact Heat ExchangerTechnical Paper Publication. IMECE2018-86682Sean Kissick, Hailei Wang, Oregon State University, Corvallis,OR, United States

2:06pm – Calibration of External Heat Transfer CoefficientsDuring Cooling of a Partially-Filled Water Tank UsingMeasured Temperature-Time DataTechnical Paper Publication. IMECE2018-86716Vishal Ramesh, Sandip Mazumder, Ohio State University,Columbus, OH, United States, Gurpreet Matharu, DhavalVaishnav, Syed Ali, Don Lawrence, Jatin Desai, MohsenEhteshami, Ford Motor Company, Dearborn, MI, United States

2:27pm – Preliminary Heat Transfer Simulation Model of aNovel Dynamic Thermal Ablation ProbeTechnical Paper Publication. IMECE2018-86874Joseph Nakao, Yen-Lin Han, Seattle University, Seattle, WA,United States

2:48pm – Analysis of Flow and Thermal Stress in a BlastFurnace BlowpipeTechnical Paper Publication. IMECE2018-88468Yuhan Cui, Justina Lee, Nicholas Walla, Purdue UniversityNorthwest, Hammond, IN, United States, Armin Silaen,Purdue University Northwest CIVS, Hammond, IN, UnitedStates, Dale Goodloe, ArcelorMittal, East chicago, IN, UnitedStates, Chenn Zhou, Purdue University Calumet, Hammond,IN, United States

3:09pm – Numerical Heat Transfer Study of CombinedWater and Air Cooling in a High-Speed Electric MotorTechnical Presentation. IMECE2018-89401Jun Lin, Kevin Anderson, California State Polytech University,Pomona, CA, United States


136

10-6 K6-5 THERMAL MANAGEMENT OFBATTERY SYSTEMS10-6-2 CapacitorsFourth Floor, David L. Lawrence Convention Center, Room 407

3:45pm–5:30pm

Session Chair: Leitao Chen, Rice University, Houston, TX,United States

3:45pm – Heat Generation Rate Measurements in HybridSupercapacitors DevicesTechnical Presentation. IMECE2018-88886Obaidallah Munteshari, Jonathan Lau, AmpolLikitchatchawankun, Bing-Ang Mei, Christopher Choi,Bruce Dunn, Laurent Pilon, University of California, Los Angeles, Los Angeles, CA, United States

4:06pm – Heat Generation in All-Solid-StateSupercapacitors With Graphene Electrodes and GelElectrolytesTechnical Presentation. IMECE2018-88899Ampol Likitchatchawankun, University of California, Los Angeles, Los Angeles, CA, United States, Arpan Kundu,Purdue University, West Lafayette, IN, United States,Obaidallah Munteshari, Timothy Fisher, Laurent Pilon,University of California, Los Angeles, Los Angeles, CA, United States

4:27pm – Continuum Modeling of Heat Generation inPorous Electrical Double-Layer Capacitors DuringGalvanostatic Charge/DischargeTechnical Presentation. IMECE2018-88903Arpan Kundu, Purdue University, West Lafayette, IN, UnitedStates, Laurent Pilon, Timothy Fisher, University of California,Los Angeles, Los Angeles, CA, United States

10-10 K6-9 TWO PHASE TRANSPORT IN ENERGY SYSTEMS AND NON-EQUILIBRIUMAND DYNAMIC ENERGY SYSTEMS10-10-1 K6-9 Two Phase Transport in Energy Systemsand Non-Equilibrium and Dynamic Energy SystemsThird Floor, David L. Lawrence Convention Center, Room 321

3:45pm–5:30pm

Session Chair: David Pratt, USAF, WPAFB, OH, United States

3:45pm – Calculation of Evaporation From Fukushima NPPSpent Fuel PoolsTechnical Paper Publication. IMECE2018-86561Mirza Mohammed Shah, Engineering Research Associates,Redding, CT, United States

4:06pm – An Influence of the Numerical Modeling of theTransition Between the Stator and Rotor on theThermodynamic Condensation Loss in the Low-PressurePart of a Steam TurbineTechnical Paper Publication. IMECE2018-86571Guk-chol Jun, Czech Technical University in Prague, Prague,Czech Republic, Lukas Mrozek, University of West Bohemia,Pilsen, Czech Republic

4:27pm – Pool Boiling Heat Transfer of N-Pentane andAcetone on Nanostructured Surfaces by ElectrophoreticDepositionTechnical Paper Publication. IMECE2018-87752Zan Wu, Anh Duc Pham, Zhen Cao, Lund University, Lund,Sweden, Cathrine Albèr, Peter Falkman, Tautgirdas Ruzgas,Malmö University, Malmö, Sweden, Bengt Sunden, LundUniversity, Lund, Sweden

4:48pm – Supply Air Temperature Prediction in an Air-Handling Unit Using Artificial Neural NetworkTechnical Paper Publication. IMECE2018-88507Nikita R. Sukthankar, Abhishek Uday Walekar, DerejeAgonafer, University of Texas at Arlington, Arlington, TX,United States

5:09pm – Numerical Study on the PerformanceCharacteristics of Cylindrical Heat Pipes With DifferingWick TypeTechnical Paper Publication. IMECE2018-86607Mahboobe Mahdavi, Saeed Tiari, Ajaysinh B. Solanki, Vivek Pawar, Gannon University, Erie, PA, United States

10-15 K8-1 FUNDAMENTALS OF BOILINGAND CONDENSATION – I10-15-3 K8-1 Fundamentals of Boiling, Evaporation,and CondensationThird Floor, David L. Lawrence Convention Center, Room 320

3:45pm–5:30pm

Session Chair: Diana-Andra Borca-Tasciuc, RensselaerPolytech Institute, Troy, NY, United States

Session Co-Chair: Navdeep Dhillon, California StateUniversity Long Beach, Long Beach, CA, United States

3:45pm – Electrowetting-Induced Rapid Coalescence andShedding of Droplets During Condensation of Moist AirTechnical Presentation. IMECE2018-88973Enakshi Wikramanayake, Vaibhav Bahadur, University ofTexas at Austin, Austin, TX, United States

4:06pm – Hierarchical Microporous Surfaces for EnhancingCapillary Boiling Heat TransferTechnical Presentation. IMECE2018-87270Rongfu Wen, Shanshan Xu, Yung-Cheng Lee, RongguiYang, University of Colorado Boulder, Boulder, CO, UnitedStates

4:27pm – Producing Syngas From Glycerol by Film BoilingTechnical Presentation. IMECE2018-87613Pushan Sharma, C. Thomas Avedisian, Jordan D. Brunson,Cornell University, Ithaca, NY, United States, Wing Tsang,National Institute of Standards and Technology, Gaithersburg,MD, United States, Ivan Keresztes, Cornell University, Ithaca,NY, United States


137

4:48pm – Theoretical Model of Droplets Motions on SolidSurface With Radial Wettable and Evaporation RateGradientsTechnical Paper Publication. IMECE2018-87890Yanjie Yang, Zan Wu, Lund University, Lund, Sweden,Xiaoqian Chen, National University of Defense Technology,Changsha, China, China, Bengt Sunden, Lund University,Lund, Sweden, Yiyong Huang, National University of DefenseTechnology, Changsha, China

5:09pm – Molecular Simulation of Steady-state Evaporationand Condensation in the Presence of a Non-CondensableGasTechnical Presentation. IMECE2018-86180Zhi Liang, California State University, Fresno, Clovis, CA,United States, Pawel Keblinski, RPI, Troy, NY, United States

10-25 K9-5 MICRO/NANOSCALE PHASECHANGE HEAT TRANSFER10-25-1 K9-5 Micro-/Nanoscale Phase Change HeatTransfer – IThird Floor, David L. Lawrence Convention Center, Room 330

3:45pm–5:30pm

Session Chair: Dong Liu, University of Houston, Houston, TX,United States

Session Co-Chair: Tengfei Luo, University of Notre Dame,Notre Dame, IN, United States

3:45pm – Fast Evaporation From Single GrapheneNanoporeTechnical Presentation. IMECE2018-89652Siyang Xiao, Boston University, Allston, MA, United States,Chuanhua Duan, Boston University, Boston, MA, UnitedStates

4:06pm – Effects of Size, Shape and Porosity onEvaporation From NanoporesTechnical Presentation. IMECE2018-89669Haowen Chen, Chuanhua Duan, Boston University, Boston,MA, United States

4:27pm – Computational Study of Thermodynamics andTransport of Water Confined Between GrapheneTechnical Presentation. IMECE2018-89864Ujash Shah, Timothy Fisher, University of California, LosAngeles, Los Angeles, CA, United States

4:48pm – Molecular Dynamics Simulation of Thin-FilmEvaporation From Nanocoated Surfaces: An Investigationof the Role of Surface Wettability Interfacial ThermalResistance on the Evaporate RateTechnical Presentation. IMECE2018-90017Binjian Ma, Washington University in St. Louis, CollegeStation, TX, United States, Li Shan, Washington University in St. Louis, St. Louis, MO, United States, Baris Dogruoz, Cisco Systems Inc., Santa Clara, CA, United States, Damena Agonafer, Washington University in St. Louis, Saint Louis, MO, United States

5:09pm – Fundamental Mechanisms of EvaporationKinetics of Non-Spherical Microdroplets Confined byAsymmetric Micropillar StructuresTechnical Presentation. IMECE2018-90018Li Shan, Washington University in St. Louis, St. Louis, MO, United States, Binjian Ma, Washington University in St. Louis, College Station, TX, United States, Baris Dogruoz,Cisco Systems Inc., Santa Clara, CA, United States, DamenaAgonafer, Washington University in St. Louis, Saint Louis, MO, United States

10-34 K11-3 CMS- APPLIED COMBUSTION10-34-2 CMS—Applied Combustion: ImprovingSystem PerformanceThird Floor, David L. Lawrence Convention Center, Room 326

3:45pm–5:30pm

Session Chair: Kris Jorgensen, A. O. Smith, Brookfield, WI,United States

Session Co-Chair: Mehdi Esmaeilpour, Marshall University,Huntington, WV, United States

3:45pm – Correlating Thermal Characteristics From Flow-Reactor Experiments With Primary Reference FuelTechnical Paper Publication. IMECE2018-88042Jun-Chun Wong, Super Micro Computer, Inc., San Jose, CA,United States, Lea Der Chen, Texas A&M University - CorpusChristi, Corpus Christi, TX, United States

4:06pm – Influence of Renewable Gas Addition to NaturalGas on the Combustion Performance of Cooktop BurnersTechnical Paper Publication. IMECE2018-87932Yan Zhao, Shiny Choudhury, Vincent McDonell, University ofCalifornia, Irvine, CA, United States

4:27pm – Preheat Limits in Practical Combustor Design:Experiments and SimulationsTechnical Paper Publication. IMECE2018-88111Aleksandr Fridlyand, Brian Sutherland, Paul Glanville, GasTechnology Institute, Des Plaines, IL, United States

4:48pm – Water/Steam Injection for NOx Reduction inProcess BurnersTechnical Paper Publication. IMECE2018-88688Steve Londerville, Coen, Hayward, CA, United States, Kevin Anderson, Coen, Sacramento, CO, United States,Charles Baukal, John Zink Co. LLC, Tulsa, OK, United States,Wes Bussman, John Zink Hamworthy Combustion, Tulsa, OK,United States

5:09pm – Infrared Thermography to Measure Heat Transferof a Heated Curved Thin SheetTechnical Paper Publication. IMECE2018-86172Gaofeng Wang, Liang Zhong, Yifan Xia, Zhejiang University,Hangzhou, Zhejiang, China


138

10-39 K14-1 GAS TURBINE HEAT TRANSFERAND COOLING10-39-1 Gas Turbine Heat Transfer and CoolingFourth Floor, David L. Lawrence Convention Center, Room 405

3:45pm–5:30pm

Session Chair: Stephen Lynch, Pennsylvania State University,University Park, PA, United States

Session Co-Chair: Andrew Nix, West Virginia University,Morgantown, WV, United States

3:45pm – Effect of Nozzle-to-Target Spacing on FinEffectiveness and Convective Heat Transfer Coefficient forArray Jet Impingement Onto Novel Micro-RoughnessStructuresTechnical Paper Publication. IMECE2018-86501Prashant Singh, North Carolina State University, Raleigh, NC,United States, Mingyang Zhang, Virginia Tech, Blacksburg,VA, United States, Shoaib Ahmed, Srinath Ekkad, NorthCarolina State University, Raleigh, NC, United States

4:06pm – Simulation of Film Cooling Heat Transfer andSimulation Improvement With a Modified DES TurbulenceModelTechnical Paper Publication. IMECE2018-86887Feiyan Yu, Savas Yavuzkurt, Pennsylvania State University,University Park, PA, United States

4:27pm – Large Eddy Simulations of Discrete Film CoolingWith Different Freestream Turbulence LevelsTechnical Presentation. IMECE2018-89763Yousef Kanani, Sumanta Acharya, Illinois Institute ofTechnology, Chicago, IL, United States

4:48pm – Large-Eddy Simulations of Low Pressure TurbineEndwall Flow and Heat TransferTechnical Paper Publication. IMECE2018-87876Stephen Lynch, Pennsylvania State University, University Park,PA, United States

5:09pm – A Novel Air-Air Heat Exchanger Design andExperimental Validation for Aero-EnginesTechnical Paper Publication. IMECE2018-87169Yinlong Liu, Yanchen Fu, Haoran Huang, Jie Wen, Guoqiang Xu, Beihang University, Beijing, China

10-40 K15-1 TRANSPORT PHENOMENA INMANUFACTURING AND MATERIALSPROCESSING10-40-2 K15-1 Transport Phenomena inManufacturing and Materials Processing – IIFourth Floor, David L. Lawrence Convention Center, Room 406

3:45pm–5:30pm

Session Chair: Patrick Mensah, Southern University, BatonRouge, LA, United States

Session Co-Chair: Ying Sun, Drexel University, Philadelphia,PA, United States

3:45pm – Thermal Stress Associated With Non-Fourier HeatConduction in Femtosecond Laser Heating of MultilayerMetallic FilmsTechnical Paper Publication. IMECE2018-86144Swarup Bag, IIT Guwahati, Guwahati, India, M. Ruhul Amin,Montana State University, Bozeman, MT, United States

4:06pm – A Study of Photo-Thermal-Fluids TransportPhenomena With Marangoni Effect of Laser Micro-Patterning ProcessTechnical Presentation. IMECE2018-88808Ming-Tsang Lee, National Tsing Hua University, Hsinchu,Taiwan

4:27pm – An Experimental Setup for Multiple Air JetImpingement Over a SurfaceTechnical Paper Publication. IMECE2018-87995Flávia Barbosa, Joao Silva, Pedro Ribeiro, SenhorinhaTeixeira, Delfim Soares, University of Minho, Guimarães,Portugal, Duarte Santos, Bosch Car Multimedia SA, Braga,Portugal, Maria Cerqueira, Physics Department, Braga,Portugal, Jose Teixeira, University of Minho, Guimarães,Portugal

10-53 K20-3 APPLICATIONS OFCOMPUTATIONAL HEAT TRANSFER10-53-2 Applications of Computational HeatTransfer: Industrial ApplicationsThird Floor, David L. Lawrence Convention Center, Room 327

3:45pm–5:30pm

Session Chair: Samuel Subia, Sandia National Laboratories,Albuquerque, NM, United States

Session Co-Chair: Aaron Wemhoff, Villanova University,Villanova, PA, United States

3:45pm – Study on Cutting Temperature Modeling ofMachined Workpiece in End Milling In Situ TiB2/7050AlMMCsTechnical Paper Publication. IMECE2018-87319Yifeng Xiong, Wenhu Wang, Ruisong Jiang, Kunyang Lin,Northwestern Polytechnical University, Xi’an, Shaanxi, China


139

4:06pm – Air Flow Velocity Field Validation and TurbulenceStudies on a Single Rack Model in Data CentersTechnical Paper Publication. IMECE2018-86575Long Phan, Beichao Hu, Cheng-xian Lin, FloridaInternational University, Miami, FL, United States

4:27pm – CFD Model of the Turboprop Engine Hot Part: Bay CoolingTechnical Paper Publication. IMECE2018-87066Goran Simeunovic, Petr Hatschbach, Lukas Popelka, Czech Technical University in Prague, Prague, Czech Republic

4:48pm – Combined Computational and ExperimentalAnalysis of Cooldown of a Surrogate Engine MountAssemblyTechnical Paper Publication. IMECE2018-87139Navni N. Verma, Andrei Iacob, Sandip Mazumder, AhmetSelamet, Ohio State University, Columbus, OH, United States

5:09pm – Dynamic Numerical Simulation of Heat Transferand Fluid Flow in Sustainable Farming CompartmentTechnical Presentation. IMECE2018-89254Jae Sung Park, Siamak Mirfendereski, University ofNebraska–Lincoln, Lincoln, NE, United States, M. SinaMousavi, Jongwan Eun, University of Nebraska–Lincoln,Omaha, NE, United States


10-16 K8-2 FUNDAMENTALS OF SINGLEPHASE CONVECTION10-16-1 K8-2 Fundamentals of Single PhaseConvectionThird Floor, David L. Lawrence Convention Center, Room 331

10:00am–11:45am

Session Chair: Patrick Oosthuizen, Queen’s University,Kingston, QC, Canada

Session Co-Chairs: Chris Kobus, Oakland University,Rochester, MI, United States, Diana-Andra Borca-Tasciuc,Rensselaer Polytech Institute, Troy, NY, United States

10:00am – Measurement of Heat Transfer Coefficient inInteraction Zone of Multiple Liquid Jet ImpingementTechnical Presentation. IMECE2018-88888Chaitanya Ghodake, Bharat Forge, Pune, Maharshtra, India

10:21am – Utilizing the Integral Technique to Determine theSimilarity Variable in Classical Heat Transfer Problems:Thermal Boundary Layer TheoryTechnical Paper Publication. IMECE2018-88662Chris Kobus, Oakland University, Rochester, MI, United States

10:42am – Numerical Study on Apparent Permeability ofPorous Media in Slip Gas Flows Based on LatticeBoltzmann MethodTechnical Paper Publication. IMECE2018-87152Zhenyu Liu, Zhiyu Mu, Huiying Wu, Shanghai Jiao TongUniversity, Shanghai, China

11:03am – Nonlinear Analysis of Convection inFerromagnetic Liquids: Effect of RotationTechnical Paper Publication. IMECE2018-87367Anthony Christy Melson, G.N. Sekhar, BMS College ofEngineering, Bengaluru, Karnataka, India

11:24am – Experimental Investigation of VaporCompression Cycle Under Influence ofMagnetohydrodynamic ForceTechnical Paper Publication. IMECE2018-88528Nikhil Shrikant Mane, PVPIT, Budhgaon, Sangli, Maharashtra,India, Narayanrao Hargude, RIT Sakharale, BudhgaonMaharashtra, India, Nutan Hargude, Adarsh Collge, Vita,Sangli, Maharashtra, India

TRACK 10 HEAT TRANSFER AND THERMAL ENGINEERING – TUESDAY, NOVEMBER 13 / WEDNESDAY, NOVEMBER 14

140

10-25 K9-5 MICRO/NANOSCALE PHASECHANGE HEAT TRANSFER10-25-2 K9-5 Micro-/Nanoscale Phase Change HeatTransfer – IIThird Floor, David L. Lawrence Convention Center, Room 320

10:00am–11:45am

Session Chair: Chuanhua Duan, Boston University, Boston,MA, United States

Session Co-Chair: Dong Liu, University of Houston, Houston,TX, United States

10:00am – Local Measurement of the Evaporative HeatTransfer Coefficient in Thin Films Using Frequency DomainThermoreflectanceTechnical Presentation. IMECE2018-86605Xiaoman Wang, Xiaoyue Zhao, Alan McGaughey, JonathanMalen, Carnegie Mellon University, Pittsburgh, PA, UnitedStates

10:21am – Interfacial DefrostingTechnical Presentation. IMECE2018-86939Shreyas Chavan, Kazi Fazle Rabbi, Thomas Foulkes,Kalyan Boyina, Robert Pilawa-Podgurski, Nenad Miljkovic,University of Illinois at Urbana-Champaign, Urbana, IL, UnitedStates

10:42am – Hybrid Surface Derived From PDMS StampingTechnical Presentation. IMECE2018-88106Muhammad Jahidul Hoque, Seok Kim, Nenad Miljkovic,University of Illinois at Urbana-Champaign, Urbana, IL, UnitedStates

11:03am – Thermal Transport Crossover From Crystalline to Partial-Crystalline Partial-Liquid StateTechnical Presentation. IMECE2018-88862Yanguang Zhou, University of California, Los Angeles, LosAngeles, CA, United States, Shiyun Xiong, SoochowUniversity, China, Soochow, China, Xiaoliang Zhang, DalianUniversity of Technology, China, Dalian, China, Sebastian Volz,University of Tokyo, Japan, Chatenay, France, Ming Hu,University of South Carolina, Columbia, DC, United States

11:24am – Contact Line and Microlayer Movement in aVapor Bubble During Pool BoilingTechnical Presentation. IMECE2018-88966An Zou, Shalabh Maroo, Syracuse University, Syracuse, NY,United States

10-36 K13-1 HEAT TRANSFER INMULTIPHASE SYSTEMS10-36-3 K13-1 HeatTransfer in Multiphase Systems – IIIThird Floor, David L. Lawrence Convention Center, Room 330

10:00am–11:45am

Session Chair: Vinod Srinivasan, UMN, Minneapolis, MN,United States

10:00am – Transient Ash Deposition Modeling in Full-scaleLow Temperature Heat Exchangers for Pulverized Coal-fired Power Plant ApplicationsTechnical Presentation. IMECE2018-89694Sandeep Aryal, Kwangkook Jeong, Arkansas StateUniversity, State University, AR, United States, Shinku Lee,Eungchul Lee, Doosan Heavy Industries & Construction Co.Ltd., Gyeongnam, Korea (Republic)

10:21am – Analytical Modeling on Multiphase Heat andMass Transfer in Full-Scale Gas-to-Gas Cooler forPulverized Coal-Fired Power Plant ApplicationsTechnical Presentation. IMECE2018-89698Santosh Tamang, Arkansas State University, Jonesboro, AR,United States, Kwangkook Jeong, Arkansas State University,State University, AR, United States, Shinku Lee, EungchulLee, Doosan Heavy Industries & Construction Co. Ltd.,Gyeongnam, Korea (Republic)

10:42am – Thermal Performance of Slurry Flow WithMicroencapsulated Phase Change Material in Circular TubeTechnical Presentation. IMECE2018-89940Weiwei Zhu, Hamidreza Shabgard, University of Oklahoma,Norman, OK, United States

11:03am – Substrate Thermal Conductivity Controls theAbility to Manufacture Microstructures via Laser-InducedDirect WriteTechnical Presentation. IMECE2018-89797John A. Tomko, David Olson, Jeffrey Braun, AndrewKelliher, University of Virginia, Charlottesville, VA, UnitedStates, Bryan Kaehr, Sandia National Laboratories,Albuquerque, NM, United States, Patrick E. Hopkins,University of Virginia, Charlottesville, VA, United States

11:24am – Integrated Wick System in Evaporatively-CooledHeat Sink for Thermal Management of ThermoelectricGeneratorsTechnical Paper Publication. IMECE2018-86904Michael Ozeh, Purdue University Northwest, Hammond, IN,United States, A. G. Agwu Nnanna, University of Texas of thePermian Basin, Odessa, TX, United States

TRACK 10 HEAT TRANSFER AND THERMAL ENGINEERING – WEDNESDAY, NOVEMBER 14

141

10-44 K18-1 THERMAL TRANSPORT UNDERHIGH TEMPERATURE AND/OR PRESSURECONDITIONS10-44-1 Thermal Transport Under Microscale andRotating FeaturesThird Floor, David L. Lawrence Convention Center, Room 333

10:00am–11:45am

Session Chair: Qiuwang Wang, Xi’an Jiaotong University,Xi’an, Shaanxi, China

10:00am – Experimental Investigation on Flow Field in aRotating Channel With a New TR-PIV SystemTechnical Paper Publication. IMECE2018-86976Shengjun Zhou, Haiwang Li, Zhi Tao, Ruquan You, Haoyu Duan, Beihang University, Beijing, China

10:21am – Computational Investigation of the Effects ofPseudo-Boiling on Microscale Supercritical CO2 HeatTransferTechnical Presentation. IMECE2018-87140Mahdi Nabil, Alexander Rattner, Pennsylvania StateUniversity, University Park, PA, United States

10:42am – Experimental Investigation on Boundary LayerFlow Under the Effect of Temperature Gradient in a SmoothRotating Channel Using Hot-WireTechnical Paper Publication. IMECE2018-87183Gangfu Li, Zhi Tao, Huijie Wu, Ruquan You, Haiwang Li,Beihang University, Beijing, China

11:03am – Numerical Study on Influencing Factors of FilmCooling on Turbine Blade Leading Edge Under RotatingStateTechnical Paper Publication. IMECE2018-87258Yiwen Ma, Haiwang Li, Meisong Yang, Min Wu, HuiminZhou, Beihang University, Beijing, Beijing, China

11:24am – Rotating Film Cooling Performance of the HoleNear the Leading Edge on the Suction Side of the TurbineBladeTechnical Paper Publication. IMECE2018-86929Zhiyu Zhou, Haiwang Li, Haichao Wang, Guoqin Zhao, Feng Han, Min Wu, Beihang University, Beijing, Beijing, China

10-17 K8-3 FUNDAMENTALS OF MULTI-SCALE MODELING10-17-1 Fundamentals of Multi-Scale ModelingThird Floor, David L. Lawrence Convention Center, Room 331

1:45pm–3:30pm

Session Chair: Nicholas Roberts, Utah State University,Logan, UT, United States

Session Co-Chair: Alan McGaughey, Carnegie MellonUniversity, Pittsburgh, PA, United States

1:45pm – Long-Wave Homogenization of Porous MediaElectromagnetic Heat ExchangersTechnical Presentation. IMECE2018-87408Joseph Gaone, Burt Tilley, Vadim Yakovlev, WorcesterPolytechnic Institute, Worcester, MA, United States

2:06pm – From Discrete Ordinate Method to InterpolationSupplemented Lattice Boltzmann Modeling of in-PlanePhonon TransportTechnical Paper Publication. IMECE2018-87590Dongyang Zhao, Yangyu Guo, Tsinghua University, Beijing,Beijing, China

2:27pm – Stochastic Homogenization of RandomlyPerturbed, Multiscale Periodic Heat Conduction ProblemsTechnical Presentation. IMECE2018-89762Kelechi Ogbuanu, R. Valery Roy, University of Delaware,Newark, DE, United States

2:48pm – Multiscale Investigation of Thickness DependentMelting Thresholds of Nickel Film Under FemtosecondLaser HeatingTechnical Paper Publication. IMECE2018-86947Pengfei Ji, Mengzhe He, Yiming Rong, Southern Universityof Science and Technology, Shenzhen, Guangdong, China,Yuwen Zhang, University of Missouri, Columbia, MO, UnitedStates, Yong Tang, South China University of Technology,Guangzhou, Guangdong, China

3:09pm – A Combined GCMC and FVM Simulation Methodfor CO2 Adsorption in 13X Zeolite Adsorption BedTechnical Paper Publication. IMECE2018-87009Hui Wang, Jun-Qiang Bai, Northwestern PolytechnicalUniversity, Xi’an, China, Zhiguo Qu, Xi’an Jiaotong University,Xi’an, Shaanxi, China, Yu Wang, Northwestern PolytechnicalUniversity, Xi’an, China, Yang Zhang, Xi’an Jiaotong University,Xi’an, China


142

10-21 K9-1 THERMAL TRANSPORT ACROSSHARD/SOFT INTERFACES 10-21-3 K9-1 Thermal Transport Across Hard/SoftInterfaces – IIIThird Floor, David L. Lawrence Convention Center, Room 330

1:45pm–3:30pm

Session Chair: Yee Kan Koh, National University of Singapore,Singapore, Singapore

Session Co-Chair: Anil Yuksel, IBM Corporation, Austin, TX,United States

1:45pm – Fundamental Study of Multiple Slopes Exhibitedby Measured Thermal Contact Conductance (TCC) VersusLoad Data for Metal-Metal ContactsTechnical Paper Publication. IMECE2018-86722Navni N. Verma, Sandip Mazumder, Ohio State University,Columbus, OH, United States

2:06pm – Transient Heat and Mass Transfer During GasAdsorption Into Metal-Organic FrameworksTechnical Presentation. IMECE2018-88057Hasan Babaei, University of Pittsburgh, Carnegie MellonUniversity, Pittsburgh, PA, United States, Christopher E.wilmer, University of Pittsburgh, Pittsburgh, PA, United States

2:27pm – Heat Transfer Modeling of Nanoparticle Packingson a SubstrateTechnical Paper Publication. IMECE2018-88642Anil Yuksel, IBM Corporation, Austin, TX, United States,Edward Yu, Michael Cullinan, University of Texas at Austin,Austin, TX, United States, Jayathi Murthy, University ofCalifornia, Los Angeles, Los Angeles, CA, United States

2:48pm – Monitoring Heat Transport Across Organic-Inorganic Heterojunctions With Atomic Spatial ResolutionTechnical Presentation. IMECE2018-89393Yuexiang Yan, Yee Kan Koh, National University of Singapore,Singapore, Singapore

10-26 K9-6 NANOSCALE RADIATION HEATTRANSFER 10-26-1 Measurement of Near-Field ThermalRadiationThird Floor, David L. Lawrence Convention Center, Room 320

1:45pm–3:30pm

Session Chair: Liping Wang, Arizona State University, Tempe,AZ, United States

Session Co-Chair: Bo Zhao, Stanford University, Stanford, CA,United States

1:45pm – Near-Field Based Energy Transfer and Conversionin Nanoscale GapsInvited Presentation. IMECE2018-89363Pramod Sangi Reddy, University of Michigan, Ann Arbor, MI,United States

2:27pm – Experimental Measurement of the Spectrum ofNear-Field Thermal EmissionTechnical Presentation. IMECE2018-88834Saman Zare, Carl Tripp, Sheila Edalatpour, University ofMaine, Orono, ME, United States

2:48pm – Conversion of Heat to Electricity Using a NanoGap Near-Field Thermophotovoltaic DeviceTechnical Presentation. IMECE2018-89352Linxiao Zhu, Anthony Fiorino, Dakotah Thompson, RohithMittapally, Pramod Sangi Reddy, Edgar Meyhofer, Universityof Michigan, Ann Arbor, MI, United States

3:09pm – Near-Field Radiative Thermal Regulation WithElectrically Tunable Monolayer GrapheneTechnical Presentation. IMECE2018-89213Xiaoyan Ying, Liping Wang, Arizona State University, Tempe,AZ, United States

10-29 K9-9 NANOSCALE HEAT TRANSPORTIN PRACTICAL SYSTEMS 10-29-7 Micro-/Nanoelectronics and Related IssuesThird Floor, David L. Lawrence Convention Center, Room 333

1:45pm–3:30pm

Session Chair: Sanjiv Sinha, University of Illinois at Urbana-Champaign, Urbana, IL, United States

Session Co-Chair: Yanbao Ma, University of California,Merced, Merced, CA, United States

1:45pm – Phonon Transport Properties of Pristine andDefective Beta-Ga2O3

Invited Presentation. IMECE2018-89447Zhequan Yan, Satish Kumar, Georgia Institute of Technology,Atlanta, GA, United States

2:27pm – 3D Anisotropic Thermal Conductivity Tensor ofBeta-Ga2O3 Measured Using an Elliptical-Beam TDTRApproachTechnical Presentation. IMECE2018-87569Puqing Jiang, Xin Qian, Ronggui Yang, University ofColorado Boulder, Boulder, CO, United States

2:48pm – Ultra-Compliant Heterogeneous Copper-TinNanowire Arrays Making a Super-SolderTechnical Presentation. IMECE2018-89168Wei Gong, Pengfei Li, Yunheng Zhang, Carnegie MellonUniversity, Pittsburgh, PA, United States, Xuhui Feng, NationalRenewable Energy Laboratory, Golden, CO, United States,Joshua Major, Douglas DeVoto, Paul Paret, Charles King,Sreekant Narumanchi, National Renewable EnergyLaboratory, Golden, CO, United States, Sheng Shen, CarnegieMellon University, Pittsburgh, PA, United States

3:09pm – Multi-Length Scale Electrothermal Simulations ofGaN-Based Field Effect TransistorsTechnical Presentation. IMECE2018-88133Qing Hao, Hongbo Zhao, Yue Xiao, University of Arizona,Tucson, AZ, United Stat


143

10-11 K6-10 PANEL ON THE KEY ROLE OFHEAT TRANSFER ANALYSIS IN ENERGYSYSTEMS RESEARCH10-11-1 K6-10 Panel on the Key Role of Heat TransferAnalysis and Methodology in ResearchThird Floor, David L. Lawrence Convention Center, Room 330

3:45pm–5:30pm

Session Chair: Nesrin Ozalp, University of Minnesota Duluth,Duluth, MN, United States

3:45pm – The Key Role of Heat Transfer Analysis in EnergySystems ResearchPanel Presentation. IMECE2018-89073Patrick Oosthuizen, Queen’s University, Kingston, QC,Canada

4:06pm – Panel on the Key Role of Heat Transfer Analysis inEnergy Systems ResearchPanel Presentation. IMECE2018-90046Debjyoti Banerjee, Texas A&M University, College Station, TX,United States

4:27pm – Panel on the Key Role of Heat Transfer Analysis inEnergy Systems ResearchPanel Presentation. IMECE2018-90047Yaroslav Chudnovsky, Gas Technology Institute, Des Plaines,IL, United States

4:48pm – Panel on the Key Role of Heat Transfer Analysis inEnergy Systems ResearchPanel Presentation. IMECE2018-90048Kashif Nawaz, Oak Ridge National Laboratory, Oak Ridge, TN,United States

10-18 K8-4 FUNDAMENTALS OFLIQUID/SOLID PHASE CHANGE(ICING/DEICING, SOLIDIFICATION)10-18-1 K8-4 Fundamentals of Liquid/Solid PhaseChange (Icing/Deicing, Solidification)Third Floor, David L. Lawrence Convention Center, Room 331

3:45pm–5:30pm

Session Chair: Enakshi Wikramanayake, University of Texas atAustin, Austin, TX, United States

Session Co-Chair: Shalabh Maroo, Syracuse University,Syracuse, NY, United States

3:45pm – Extreme Icephobicity of Passive Anti-IcingMaterialsTechnical Presentation. IMECE2018-86360Rukmava Chatterjee, University of Illinois at Chicago,Chicago, IL, United States, Daniel Beysens, ESPCI PMMH,École Supérieure de Physique et de Chimie Industrielles, Paris,France, Sushant Anand, University of Illinois at Chicago,Chicago, IL, United States

4:06pm – Exploration of Variable Conductance EffectsDuring Input and Extraction of Heat From Phase ChangeThermal StorageTechnical Paper Publication. IMECE2018-88078Zachary Theroff, Dre Helmns, Van P. Carey, University ofCalifornia Berkeley, Berkeley, CA, United States’

4:27pm – Pore-Scale Modeling on Solidification of ParaffinWith Volume Change in High Porosity Open-Cell MetalFoamTechnical Presentation. IMECE2018-88875Yuanpeng Yao, Huiying Wu, Shanghai Jiao Tong University,Shanghai, China

4:48pm – Molecular Dynamics Simulations of DropletCondensation on Nano-Structured SurfacesTechnical Presentation. IMECE2018-88981Shalabh Maroo, Manish Gupta, Syracuse University,Syracuse, NY, United States, M. Fernandino, C.A. Dorao,Norwegian University of Science and Technology, Trondheim,Norway

10-26 K9-6 NANOSCALE RADIATION HEATTRANSFER10-26-2 Theoretical Prediction of Thermal Emissionand Energy ConversionThird Floor, David L. Lawrence Convention Center, Room 320

3:45pm–5:30pm

Session Chair: Sheng Shen, Carnegie Mellon University,Pittsburgh, PA, United States

Session Co-Chair: Sheila Edalatpour, University of Maine,Orono, ME, United States

3:45pm – Near-Field Thermal Emission by Periodic ArraysTechnical Presentation. IMECE2018-86335Sheila Edalatpour, University of Maine, Orono, ME, UnitedStates

4:06pm – Dipolar Radiative Thermal Conductivity inNanoparticle ArraysTechnical Presentation. IMECE2018-89069Eric Tervo, Baratunde Cola, Zhuomin Zhang, GeorgiaInstitute of Technology, Atlanta, GA, United States

4:27pm – Near-Field Thermophotonic Systems for Low-Grade Waste Heat RecoveryTechnical Presentation. IMECE2018-86723Bo Zhao, Parthiban Santhanam, Kaifeng Chen, SiddharthBuddhiraju, Shanhui Fan, Stanford University, Stanford, CA,United States

4:48pm – Quasi-Normal Mode Theory for Resonant ThermalInfrared Emitters in Near- and Far-FieldsTechnical Presentation. IMECE2018-89227Jiayu Li, Sheng Shen, Liu Baoan, Carnegie Mellon UniversityPittsburgh, PA, United States


144

5:09pm – Directional and Narrow-Band Thermal EmissionFrom NanoantennasTechnical Presentation. IMECE2018-89391Bowen Yu, Jiayu Li, Sheng Shen, Carnegie Mellon University,Pittsburgh, PA, United States

10-44 K18-1 THERMAL TRANSPORT UNDERHIGH TEMPERATURE AND/OR PRESSURECONDITIONS10-44-2 Thermal Transport Understanding and ItsApplicationsThird Floor, David L. Lawrence Convention Center, Room 333

3:45pm–5:30pm


3:45pm – Tunable Thermal Transport and ReversibleThermal Conductivity Switching in Topologically NetworkedBio-Inspired MaterialsTechnical Presentation. IMECE2018-89793John A. Tomko, University of Virginia, Charlottesville, VA,United States, Abdon Pena-Francesch, Huihun Jung,Pennsylvania State University, State College, PA, UnitedStates, Madhusudan Tyagi, National Institute of Standards,Gaithersburg, MD, United States, Benjamin Allen,Pennsylvania State University, State College, PA, UnitedStates, Melik Demirel, Pennsylvania State University,University Park, PA, United States, Patrick E. Hopkins,University of Virginia, Charlottesville, VA, United States

4:06pm – Lattice Thermal Transport in SuperhardHexagonal Diamond and Wurtzite Boron Nitride Under High Temperature and/or High PressureTechnical Presentation. IMECE2018-89714Pranay Chakraborty, Guoping Xiong, Lei Cao, Yan Wang,University of Nevada, Reno, Reno, NV, United States

4:27pm – Numerical Simulation With LB Method forPropane Combustion Within Catalytic Micro-Porous Media CombustorTechnical Paper Publication. IMECE2018-86754X.B. Feng, Zhiguo Qu, Xi’an Jiaotong University, Xi’an,Shaanxi, China

4:48pm – Fruit Ripeness Estimation for Avocado UsingThermal ImagingTechnical Paper Publication. IMECE2018-86290Sathish Kumar Gurupatham, Nick Jacob, Kevin Van DerHorn, Fahad Fahad, Erhan Ilksoy, Kennesaw State Univeristy,Marietta, GA, United States

5:09pm – Incubation Phenomenon Induced by MultipleFemtosecond Laser Pulses Burst From a Single Pulse toProcess AluminumTechnical Paper Publication. IMECE2018-86960Pengfei Ji, Mengzhe He, Yiming Rong, Southern Universityof Science and Technology, Shenzhen, Guangdong, China,Yuwen Zhang, University of Missouri, Columbia, MO, UnitedStates, Yong Tang, South China University of Technology,Guangzhou, Guangdong, China


145


10-29 K9-9 NANOSCALE HEAT TRANSPORTIN PRACTICAL SYSTEMS 10-29-5 Thermal Engineering With PlasmonicMaterialsFourth Floor, David L. Lawrence Convention Center, Room 405

8:00am–8:45am


Session Co-Chairs: Edward Kinzel, Missouri University ofScience and Technology, Rolla, MO, United States, Yu-binChen, National Tsing Hua University, Hsinchu, Taiwan

8:00am – Ultrathin Liquid Film Thickness MeasurementUsing Surface Plasmon Resonance ImagingTechnical Presentation. IMECE2018-89269Iltai (Isaac) Kim, Texas A&M University-Corpus Christi, CorpusChristi, TX, United States

8:21am – Surface Plasmon Effects on the Interfacial HeatTransport Processes in Gold NanorodsTechnical Presentation. IMECE2018-89712Andrew Kelliher, John A. Tomko, University of Virginia,Charlottesville, VA, United States, Brian B. Lynch, Joseph B.Tracy, North Carolina State University, Raleigh, NC, UnitedStates, Patrick Hopkins, University of Virginia, Charlottesville,VA, United States

8:42am – Optimization of External Quantum Efficiency ofThin Film Solar Cells Using Surrogate Modeling ofAbsorptivityTechnical Presentation. IMECE2018-89012Mine Kaya, Shima Hajimirza, Texas A&M University, CollegeStation, TX, United States

10-13 K7-1 MEASUREMENTS OFTHERMOPHYSICAL PROPERTIES10-13-1 Measurements ofThermophysical PropertiesThird Floor, David L. Lawrence Convention Center, Room 326

8:55am–10:40am


8:55am – Picosecond Transient ThermoreflectanceTechnique for Measuring Thermal Conductivity in ThinFilmsTechnical Presentation. IMECE2018-87712Jihoon Jeong, Xianghai Meng, Jung-Fu Lin, Yaguo Wang,University of Texas at Austin, Austin, TX, United States

9:16am – The Thermal Properties of Pristine and LoadedMetal Organic Framework Thin Films Under DifferentEnvironmental ConditionsTechnical Presentation. IMECE2018-89240Mallory E. DeCoster, University of Virginia, Charlottesville, VA,United States, Hasan Babaei, University of Pittsburgh,Carnegie Mellon University, Pittsburgh, PA, United States,Minyoung Jeong, Carnegie Mellon University, Pittsuburg, PA,United States, Zeinab Hassan, Karlsruhe Institute ofTechnology, Baden-Wurttemberg, Baden-Wurttemberg,Germany, Timur Islamoglu, Northwestern University,Evanston, IL, United States, Christopher E. Wilmer, Universityof Pittsburgh, Pittsburgh, PA, United States, HelmutBaumgart, Old Dominion University, Newport News, VA,United States, Jonathan Malen, Carnegie Melon University,Pittsburgh, PA, United States, Engelbert Redel, KarlsruheInstitute of Technology, Baden-Wurttemberg, Baden-Wurttemberg, Germany, Patrick Hopkins, University ofVirginia, Charlottesville, VA, United States

9:37am – Thermal Transport in Electrospun Vinyl PolymerNanofibers: Effects of Molecular Weight and Side ChainGroupsTechnical Presentation. IMECE2018-89769Yin Zhang, Southeast University, Nanjing, China, Xin Zhang,Lin Yang, Qian Zhang, Matthew Fitzgerald, VanderbiltUniversity, Nashville, TN, United States, Akira Ueda, FiskUniversity, Nashville, TN, United States, Yunfei Chen,Southeast University, Nanjing, China, Richard Mu, TennesseeState University, Nashville, TN, United States, Deyu Li, LeonBellan, Vanderbilt University, Nashville, TN, United States

9:58am – Microstructural and Thermal Characterization ofDiamond NanofluidsTechnical Paper Publication. IMECE2018-87496Farzin Mashali, Ethan Languri, Gholamreza Mirshekari,Tennessee Technological University, Cookeville, TN, UnitedStates, Jim Davidson, David Kerns, FemtoScience, Nashville,TN, United States

10:19am – Evaluation of Heat Transfer Kinetics on Layers ofAir-Rich Soft Materials in Their Natural StateTechnical Paper Publication. IMECE2018-87268Hiroki Kaneko, Atsushi Sakuma, Kyoto Institute ofTechnology, Kyoto, Japan

TRACK 10 HEAT TRANSFER AND THERMAL ENGINEERING – THURSDAY, NOVEMBER 15

146

10-26 K9-6 NANOSCALE RADIATION HEATTRANSFER 10-26-3 Radiative Properties and Radiative Transferin the Far FieldThird Floor, David L. Lawrence Convention Center, Room 324

8:55am–10:40am

Session Chair: Liping Wang, Arizona State University, Tempe,AZ, United States

Session Co-Chair: Zhen Chen, Southeast University, Nanjing,Jiangsu, China

8:55am – Simultaneously and Synergistically HarvestEnergy From the Sun and Outer SpaceTechnical Presentation. IMECE2018-86538Zhen Chen, Southeast University, Nanjing, Jiangsu, China,Linxiao Zhu, University of Michigan, Ann Arbor, Ann Arbor, MI,United States, Wei Li, Shanhui Fan, Stanford University,Stanford, CA, United States

9:16am – Scalable Metal-Free Paint for Passive RadiativeCooling Under Direct Sunlight in Daytime and NighttimeTechnical Paper Publication. IMECE2018-88658Xiangyu Li, Purdue University, West Lafayette, IN, UnitedStates, Zhifeng Huang, Wuhan University, Wuhan, China,Joseph Peoples, Purdue University, West Lafayette, IN, UnitedStates, Jun Qiu, Harbin Institute of Technology, Harbin, China,Xiulin Ruan, Purdue University, West Lafayette, IN, UnitedStates

9:37am – Hierarchical Approach of Nanoparticle SizeSelection for Enhancing Reflectance of the Solar IrradiationTechnical Presentation. IMECE2018-89973Joseph Peoples, Xiangyu Li, Purdue University, WestLafayette, IN, United States, Yaobing Lv, Jun Qiu, HarbinInstitute of Technology, Harbin, China, Zhifeng Huang, WuhanUniversity, Wuhan, China, Xiulin Ruan, Purdue University, WestLafayette, IN, United States

9:58am – Thermochromic VO2-Based Variable EmittanceCoatings for Spacecraft Thermal ControlTechnical Presentation. IMECE2018-89215Sydney Taylor, Liping Wang, Arizona State University, Tempe,AZ, United States

10:19am – Hundred-Fold Enhancement in Far-FieldRadiative Heat Transfer Over the Blackbody LimitTechnical Presentation. IMECE2018-89312Dakotah Thompson, Linxiao Zhu, Rohith Mittapally, SeidSadat, University of Michigan, Ann Arbor, MI, United States,Zhen Xing, Patrick McArdle, Mumtaz Qazilbash, College ofWilliam and Mary, Williamsburg, VA, United States, PramodSangi Reddy, Edgar Meyhofer, University of Michigan, AnnArbor, MI, United States

10-29 K9-9 NANOSCALE HEAT TRANSPORTIN PRACTICAL SYSTEMS 10-29-2 Heat Transfer Devices and EngineeringThird Floor, David L. Lawrence Convention Center, Room 325

8:55am–10:40am


Session Co-Chair: Neil Zuckerman, Seagate Technologies,Bloomington, MN, United States

8:55am – Flow Characteristics of Nitrogen (N2) in Micro-Channels of Printed Circuit Heat Exchanger (PCHE)Technical Paper Publication. IMECE2018-86617Jeong-Heon Shin, Seok Ho Yoon, Jun Seok Choi, KoreaInstitute of Mechinery & Materials, Daejeon, Korea (Republic)

9:16am – Enhanced Heat Convection in NanochannelsThrough Surface EngineeringTechnical Presentation. IMECE2018-89827Pranay Chakraborty, Tengfei Ma, Yan Wang, University ofNevada, Reno, Reno, NV, United States

9:37am – Simulation and Fabrication of AdditivelyManufactured Heat PipesTechnical Presentation. IMECE2018-89839Daniel Hsieh, Oluseyi Babatola, Sanjiv Sinha, University ofIllinois at Urbana-Champaign, Urbana, IL, United States

9:58am – Optimization of Heat Transfer Using Nano-CuttingFluidsTechnical Presentation. IMECE2018-89618Ali Hussain Kazim, Marriyam Shabbir, Faiza Mansoor,Sumaira Gulfam, University of Engineering and Technology,Lahore, Lahore, Punjab, Pakistan

10:19am – Thermomechanical Design Optimization of Roll-to-Roll Manufactured Hybrid Metal-Polymer HeatExchanger Pipes for Waste Heat RecoveryTechnical Presentation. IMECE2018-89791Manjunath Rajagopal, Yuquan Meng, Timothy Man,Harikrishnan Kumar, Arpit Dwivedi, Dhruv Gelda, ChenhuiShao, Sanjiv Sinha, University of Illinois at Urbana-Champaign, Urbana, IL, United States


147

10-47 K18-4 THERMAL ANALYSIS OFINDUSTRIAL EQUIPMENT AND SYSTEMSOPERATING UNDER EXTREME PROCESSCONDITIONS10-47-1 Heat Transfer and Heat ExchangeThird Floor, David L. Lawrence Convention Center, Room 327

8:55am–10:40am


8:55am – Performance Analysis of Multi-Pass Cross-FlowHeat ExchangersTechnical Paper Publication. IMECE2018-87049Kiran Lankalapalli, Ahmed ElSawy, Stephen Idem,Tennessee Technological University, Cookeville, TN, UnitedStates

9:16am – The Cooling Process of Agricultural ProductsAfter Boxing and PalletizingTechnical Paper Publication. IMECE2018-87788Aklilu Giorges, John Pierson, Georgia Institute of Technology,Atlanta, GA, United States

9:37am – Turbulent Multi-Jet Air Impingement forApplications in Commercial CookingTechnical Paper Publication. IMECE2018-88635Shantanu Shevade, University of South Florida, Tampa, FL,United States, Muhammad Rahman, Wichita State University,Wichita, KS, United States, Rasim Guldiken, University ofSouth Florida, Tampa, FL, United States

9:58am – Heat Transfer Aspect of a Counter-Current TwoPhase Flow System for Harvesting Natural Gas FromSeafloor HydratesTechnical Presentation. IMECE2018-88853Boyun Guo, Univiversity of Louisiana, Lafayette, LA, UnitedStates

10:19am – Experimental Comparison of 50 kW and 200 kWPrinted Circuit Heat Exchangers (PCHE)Technical Presentation. IMECE2018-89521Jeong-Heon Shin, Korea Institute of Machinery and Materials,Daejeon, Daejeon, Korea (Republic), Joo Ha Ahn, TankTech,Busan, Korea (Republic), Jungchul Kim, Sangho Sohn, SeokHo Yoon, Korea Institute of Machinery and Materials, Daejeon,Korea (Republic)

10-63 K10-4 MULTI-PHASE AND PASSIVEENHANCED HEAT TRANSFER10-63-2 Multi-Phase and Passive Enhanced HeatTransferThird Floor, David L. Lawrence Convention Center, Room 321

8:55am–10:40am

Session Chair: Amanie Abdelmessih, California BaptistUniversity, Diamond Bar, CA, United States

Session Co-Chair: Ahmed Elatar, Oak Ridge NationalLaboratory, Oak Ridge, TN, United States

8:55am – Enhanced Heat Transfer in Radial Heat Sinks forLED LampsTechnical Paper Publication. IMECE2018-87958Fernando Cano-Banda, University of Guanajuato, IrapuatoGuanajuato, Guanajuato, Mexico, Ana Gallardo-Gutierrez,Luis Luviano-Ortiz, Abel Hernandez-Guerrero, University ofGuanajuato, Salamanca, Guanajuato, Guanajuato, Mexico,Jesus Garcia-Gonzalez, Grupo SSC, San Miguel de Allende,Guanajuato, Mexico

9:16am – Influence of Pattern Geometry of Hybrid Surfaceson Dropwise Condensation Heat Transfer and DropletDynamicsTechnical Paper Publication. IMECE2018-88571Karim Egab, University of Mazaya, Nassiriyah, Nassiriyah,Iraq, Saad Oudah, Mohammad Alwazzan, Jamil Khan, ChenLi, University of South Carolina, Columbia, SC, United States

9:37am – Effects of Surface Microstructure Parameters onSpray Cooling EfficiencyTechnical Presentation. IMECE2018-89510Sankarganesh Muthukrishnan, University of Minnesota TwinCities, Minneapolis, MN, United States, Vinod Srinivasan,UMN, Minneapolis, MN, United States

9:58am – Direct Numerical Simulation of EvaporatingMeniscus in Capillary ChannelTechnical Presentation. IMECE2018-89931Mohammad Naghashnejad, Hamidreza Shabgard,University of Oklahoma, Norman, OK, United States


148

10-14 K7-2 COMPUTATIONS OFTHERMOPHYSICAL PROPERTIES10-14-1 Calculations of Thermophysical Properties 1Third Floor, David L. Lawrence Convention Center, Room 326

10:50am–12:35pm


10:50am – The Effects of Neutron Irradiation Damage onthe Lattice Thermal Conductivity of Beta-Silicon CarbideTechnical Presentation. IMECE2018-87896William Yorgason, Arden Barnes, Nicholas Roberts, UtahState University, Logan, UT, United States

11:11am – Effective Electronics Cooling ThroughMicrochannel Heat Sink (MCHS) ApplicationsTechnical Presentation. IMECE2018-88802Sonya Smith, Darryl Jennings, Jr., Howard University,Washington, DC, United States

11:32am – A Reliable Approach to Calculation ofThermophysical Properties of Liquid Using MolecularDynamics SimulationsTechnical Presentation. IMECE2018-88837Seyed Aliakbar Mirmohammadi, University of Sydney,Sydney, New South Wales, Australia

11:53am – Tunable Thermal Conductivity of Two-Dimensional PolymersTechnical Presentation. IMECE2018-89117Hao Ma, Erica O’Donnel, Zhiting Tian, Virginia Tech,Blacksburg, VA, United States

12:14pm – Evaluating the Accuracy of Neural NetworkPotential for Thermal Transport Properties of SiliconTechnical Presentation. IMECE2018-89487Hasan Babaei, University of Pittsburgh, Carnegie MellonUniversity, Pittsburgh, PA, United States, Sangyeop Lee,University of Pittsburgh, Pittsburgh, PA, United States

10-27 K9-7 ADVANCES IN METROLOGY10-27-1 Thermal Metrology for Nanoscale HeatTransferThird Floor, David L. Lawrence Convention Center, Room 324

10:50am–12:35pm

Session Chair: Yongjie Hu, University of California, LosAngeles, Los Angeles, CA, United States

Session Co-Chair: Sanjiv Sinha, University of Illinois atUrbana-Champaign, Urbana, IL, United States

10:50am – Nanoscale Thermal Metrology Using Electronsand PhotonsInvited Presentation. IMECE2018-89876Chris Dames, UC Berkeley, Berkeley, CA, United States

11:32am – A Multi-Frequency 3 Omega Method for TrackingMoving Phase Boundaries in Real TimeTechnical Presentation. IMECE2018-89632Wyatt Hodges, Chris Dames, UC Berkeley, Berkeley, CA,United States

11:53am – Reflection of Gigahertz Acoustic Phonons inSilicon at a Nanowire-Bulk InterfaceTechnical Presentation. IMECE2018-89743Dhruv Gelda, University of Illinois at Urbana-Champaign,Urbana, IL, United States, Marc Ghossoub, Intel, Hillsboro,OR, United States, Manjunath Rajagopal, Sanjiv Sinha,University of Illinois at Urbana-Champaign, Urbana, IL, UnitedStates

12:14pm – A New Experimental Metrology Based onAsymmetric Time-Domain Thermoreflectance Method forAnisotropic Thermal Conductivity MeasurementTechnical Presentation. IMECE2018-86052Man Li, Joon Sang Kang, Yongjie Hu, University of California,Los Angeles, Los Angeles, CA, United States

10-29 K9-9 NANOSCALE HEAT TRANSPORTIN PRACTICAL SYSTEMS 10-29-3 Transport at InterfacesThird Floor, David L. Lawrence Convention Center, Room 323

10:50am–12:35pm


Session Co-Chair: Yan Wang, University of Nevada, Reno,Reno, NV, United States

10:50am – Phonon-Mediated Thermal Transport at BridgedSolid-Solid InterfacesTechnical Presentation. IMECE2018-88883Rouzbeh Rastgar, Jingjie Zhang, University of Virginia,Charlottesville, VA, United States, Carlos Polanco, Oak RidgeNational Laboratory, Oak Ridge, TN, United States, Nam Q. Le,NRL, Washington, DC, United States, Avik W. Ghosh, PamelaM. Norris, University of Virginia, Charlottesville, VStates


149

11:11am – The Impact of Interdiffusion of Metal AdhesionLayers on Thermal Interface ConductanceTechnical Presentation. IMECE2018-86379Dipanjan Saha, Xiaoxiao Yu, Minyoung Jeong, MohamedDarwish, Carnegie Mellon University, Pittsburgh, PA, UnitedStates, Jeffrey Weldon, University of Hawaii, Honolulu, HI,United States, Andrew Gellman, Jonathan Malen, CarnegieMellon University, Pittsburgh, PA, United States

11:32am – Non-Equilibrium and Non-Diffusive PhononTransport Near Al/GaN InterfaceTechnical Presentation. IMECE2018-87185Xin Qian, University of Colorado Boulder, Boulder, CO, UnitedStates, Xiaokun Gu, Shanghai Jiao Tong University, Shanghaii,China, Puqing Jiang, Ronggui Yang, University of ColoradoBoulder, Boulder, CO, United States

11:53am – The Influence of Titanium Adhesion LayerOxygen Stoichiometry on Thermal Boundary Conductanceat Gold ContactsTechnical Presentation. IMECE2018-89135David Olson, Keren M. Freedy, Patrick Hopkins, Stephen J.McDonnel, University of Virginia, Charlottesville, VA, UnitedStates

12:14pm – Spatial Mapping and Analysis of ThermalBoundary Conductance of Metal–MoSe2 Interfaces UsingTime-Domain ThermoreflectanceTechnical Presentation. IMECE2018-89746David B. Brown, Georgia Institute of Technology, Atlanta, GA,United States, Xufan Li, Kai Xiao, David B. Geohegan, OakRidge National Laboratory, Oak Ridge, TN, United States,Satish Kumar, Georgia Institute of Technology, Atlanta, GA,United States

10-29-4 Thermal ConductivityFourth Floor, David L. Lawrence Convention Center, Room 405

10:50am–12:14pm


Session Co-Chair: Yee Kan Koh, National University ofSingapore, Singapore, Singapore

10:50am – Effect of Loading the MOF HKUST-1 With Water,Methanol and Ethanol on Its Thermal ConductivityInvited Presentation. IMECE2018-88286Hasan Babaei, University of Pittsburgh, Carnegie MellonUniversity, Pittsburgh, PA, United States, Minyoung Jeong,Jonathan Malen, Carnegie Mellon University, Pittsburgh, PA,United States, Christopher E. Wilmer, University of Pittsburgh,Pittsburgh, PA, United States

11:32am – Thermal Conductivity of ALD Grown PbTe/PbSeSuperlattice Thin FilmsTechnical Presentation. IMECE2018-89249Mallory E. DeCoster, University of Virginia, Charlottesville, VA,United States, Xin Chen, Kai Zhang, Helmut Baumgart, OldDominion University, Newport News, VA, United States,Patrick Hopkins, University of Virginia, Charlottesville, VA,United States

11:53am – TX-100 Capped Iron Oxide NanoparticleTransformation and Implications for Induction Heating andHyperthermia TreatmentTechnical Presentation. IMECE2018-87556Hayden Carlton, David Huitink, University of Arkansas,Fayetteville, AR, United States

12:14pm – Thermal Conductivity of Poly (3,4-ethylenedioxythiophene) Films Engineered by OxidativeChemical Vapor Deposition (oCVD)Technical Presentation. IMECE2018-89324Phil M. Smith, Laisuo Su, Wei Gong, Nathan Nakamura, B. Reeja-Jayan, Sheng Shen, Carnegie Mellon University,Pittsburgh, PA, United States

10-30 K10-1 SINGLE-PHASE ENHANCEDHEAT TRANSFER – NUMERICAL STUDIES10-30-2 Single-Phase Enhanced Heat Transfer:Numerical Studies – IFourth Floor, David L. Lawrence Convention Center, Room 406

10:50am–12:35pm

Session Chair: Maulik Shelat, Praxair, Williamsville, NY, UnitedStates

Session Co-Chair: Ahmed Elatar, Oak Ridge NationalLaboratory, Oak Ridge, TN, United States

10:50am – Heat Transfer Analyses of a 3D Graphene-Carbon Nanotube Pillared StructureTechnical Paper Publication. IMECE2018-87029Khaled Almahmoud, Weihuan Zhao, University of NorthTexas, Denton, TX, United States

11:11am – Shape Optimization of Microchannels UsingSurrogate ModellingTechnical Paper Publication. IMECE2018-87780Muhammad Ansab Ali, Tariq Saeed Khan, The PetroleumInstitute, Khalifa University of Science and Technology, AbuDhabi, Abu Dhabi, United Arab Emir., Saqib Salam, EbrahimAl-Hajri, Petroleum Institute of Abu Dhabi, Abu Dhabi, UnitedArab Emir.

11:32am – Effect of Inter-Connector on Thermo-HydraulicCharacteristics of Parallel and Counter Flow Mini-ChannelHeat SinkTechnical Paper Publication. IMECE2018-88273Amitav Tikadar, Saad Oudah, University of South Carolina,Columbia, SC, United States, Azzam Salman, University ofSouth Carolina, West Columbia, SC, United States, A.K.M.Monjur Morshed, Bangladesh University of Engineering andTechnology, Dhaka, Bangladesh, Titan Paul, University ofSouth Carolina Aiken, Aiken, SC, United States, Jamil Khan,University of South Carolina, Columbia, SC, United States


150

11:53am – Heat Transfer Enhancement in Minichannel FlowTechnical Paper Publication. IMECE2018-88539Luis Serrano, Universidad del Turabo, Villalba, PR, UnitedStates, Jose G. Pedro, Universidad del Turabo, Canovanas,PR, United States, Jahian Rodríguez, Universidad del Turabo,Cidra, PR, United States, Gerardo Carbajal, Universidad delTurabo, Caguas, PR, United States

10-14 K7-2 COMPUTATIONS OFTHERMOPHYSICAL PROPERTIES10-14-2 Calculations ofThermophysical Properties 2Third Floor, David L. Lawrence Convention Center, Room 326

2:05pm–3:50pm


2:05pm – One, Two, and Three-Dimensional Crossover ofthe Thermal Transport in ZrTe5Technical Presentation. IMECE2018-86753Tianli Feng, Sokrates Pantelides, Vanderbilt University,Nashville, TN, United States

2:26pm – Thermal Characterization of Carbon NanofiberStructures Based on Their Aspect RatioTechnical Presentation. IMECE2018-87558Amir Behbahanian, Nicholas Roberts, Utah State University,Logan, UT, United States

2:47pm – Computation of Thermophysical Properties of JetImpingement Heat TransferTechnical Presentation. IMECE2018-89519Anuj Kumar Shukla, Anupam Dewan, Indian Institute ofTechnology, Delhi, New Delhi, Delhi, India

3:08pm – Giant Reduction of Thermal Transport inPolyvinylidene Fluoride Under Tensile StrainsTechnical Presentation. IMECE2018-89789Tengfei Ma, Lei Cao, Yan Wang, University of Nevada, Reno,Reno, NV, United States

3:29pm – Anomalously Temperature-Dependent ThermalConductivity of Monolayer GaN With Large DeviationsFrom the Traditional 1/T LawTechnical Presentation. IMECE2018-89008Guangzhao Qin, University of South Carolina, Columbia, SC,United States, Zhenzhen Qin, Zhengzhou University,Zhengzhou, Henan, China, Huimin Wang, NortheasternUniversity, Shenyang, Liaoning, China, Ming Hu, University ofSouth Carolina, Columbia, SC, United States

10-29 K9-9 NANOSCALE HEAT TRANSPORTIN PRACTICAL SYSTEMS 10-29-1 Heat Conduction in 2D Materials/DevicesThird Floor, David L. Lawrence Convention Center, Room 324

2:05pm–3:50pm


Session Co-Chairs: Yaguo Wang, University of Texas, Austin,TX, United States, Michael Pettes, LANL MPA-CINT,Albuquerque, NM, United States

2:05pm – Phonon Hydrodynamic Viscosity in SuspendedGrapheneTechnical Presentation. IMECE2018-89594Xun Li, Sangyeop Lee, University of Pittsburgh, Pittsburgh,PA, United States

2:26pm – Crossover of Phonon Transport Regimes inSuspended GrapheneTechnical Presentation. IMECE2018-89595Xun Li, Sangyeop Lee, University of Pittsburgh, Pittsburgh,PA, United States

2:47pm – Exploring Nanoscale Heat Transport in EmergingHigh Thermal Conductivity Materials for Advanced ThermalManagementTechnical Presentation. IMECE2018-86051Joon Sang Kang, Huan Wu, Man Li, Yongjie Hu, University ofCalifornia, Los Angeles, Los Angeles, CA, United States

3:08pm – Nanoscale Heat Transfer and Phonon SpectralMapping in Novel 2D Materials for Thermal Regulation andEnergy HarvestingTechnical Presentation. IMECE2018-86054Joon Sang Kang, Man Li, Ming Ke, Yongjie Hu, University ofCalifornia, Los Angeles, Los Angeles, CA, United States

3:29pm – Two-Dimensional Heat Transfer Considerationsfor Thermoreflectance MeasurementsTechnical Paper Publication. IMECE2018-88657Dipta Sarkar, Partha P. Chakraborty, B. Terry Beck, ZaydLeseman, Kansas State University, Manhattan, KS, UnitedStates


151

10-30 K10-1 SINGLE-PHASE ENHANCEDHEAT TRANSFER—NUMERICAL STUDIES10-30-1 Single-Phase Enhanced Heat Transfer:Numerical Studies IIFourth Floor, David L. Lawrence Convention Center, Room 406

2:05pm–3:50pm

Session Chair: Maulik Shelat, Praxair, Williamsville, NY, UnitedStates

2:05pm – An Eight-Passage Serpentine Design for NegatingCoriolis Force Effect on Heat TransferTechnical Paper Publication. IMECE2018-86354Prashant Singh, Srinath Ekkad, North Carolina StateUniversity, Raleigh, NC, United States

2:26pm – High Porosity and High Pore Density Thin CopperFoams for Compact Electronics CoolingTechnical Paper Publication. IMECE2018-86355Sanskar Panse, Prashant Singh, Srinath Ekkad, NorthCarolina State University, Raleigh, NC, United States

2:47pm – Thermohydraulic Effect of Aspect Ratio onCombination Angled Dimpled in a Rectangular ChannelTechnical Paper Publication. IMECE2018-86558Samson A. Aasa, University of Johanessburg, Johannessburg,Gauteng, South Africa, Tien-Chien Jen, University ofJohannesburg, Johannesburg, South Africa

3:08pm – A Numerical Analysis of Heat TransferEnhancement by Turbulence Generated From Swirl Flow byTwisted TapeTechnical Paper Publication. IMECE2018-86616Muhammad Azmain Abdullah, City University, Dhaka, Dhaka,Bangladesh, M. Ruhul Amin, Montana State University,Bozeman, MT, United States, Mohammad Ali, BangladeshUniversity of Engineering and Technology, Dhaka, Bangladesh

10-50 K19-3 HEAT TRANSFER IN HVACSYSTEMS AND AIR QUALITY ANDCOMFORT IN CONFINED SPACES10-50-1 Heat Transfer in HVAC Systems and AirQuality and Comfort in Confined SpacesThird Floor, David L. Lawrence Convention Center, Room 325

2:05pm–3:50pm

Session Chair: Kashif Nawaz, Oak Ridge National Laboratory,Oak Ridge, TN, United States

Session Co-ChairS: S.A. Sherif, University of Florida,Gainesville, FL, United States, Michael Pate, Texas A&MUniversity, College Station, TX, United States

2:05pm – Cooling Systems for Refuge Alternatives in HotMine ConditionsTechnical Paper Publication. IMECE2018-87507Lincan Yan, David Yantek, Miguel Reyes, Nicholas Damiano,Justin Srednicki, Joseph Bickson, Bruce Whisner,CDC/NIOSH, Pittsburgh, PA, United States, Eric Bauer, BCS Life Support LLC, Titusville, FL, United States

2:26pm – An Embedded Mechatronic Device for Real-TimeMonitoring and Prediction of Occupants—Thermal ComfortTechnical Paper Publication. IMECE2018-87632Boris Pavlin, Giovanni Carabin, Giovanni Pernigotto,Renato Vidoni, Andrea Gasparella, Free University ofBolzano, Bolzano, Italy

2:47pm – Net-Zero Water (NZW) Reuse Desiccant AssistedEvaporative Cooling System for Data CentersTechnical Presentation. IMECE2018-89738David Okposio, Purdue University Northwest, Hammond, IN,United States, A.G. Agwu Nnanna, University of Texas of thePermian Basin, Odessa, TX, United States

3:08pm – Sublimating Paradichlorobenzene Spheres in aNatural Convection EnvironmentTechnical Presentation. IMECE2018-86427William S. Janna, University of Memphis, Memphis, TN,United States, Willi P. Anderson, University of TennesseeKnoxville, Knoxville, TN, United States, Jeffrey G. Marchetta,William Janna, University of Memphis, Memphis, TN, UnitedStates

3:29pm – Thermal Properties of a Concrete Aerogel PasteCompositeTechnical Paper Publication. IMECE2018-88660Chris Kobus, J. David Schall, Oakland University, Rochester,MI, United States

10-61 K8-7 FUNDAMENTALS OF BOILINGAND CONDENSATION – II10-61-1 K8-7 Fundamentals of Boiling andCondensation – II-BThird Floor, David L. Lawrence Convention Center, Room 323

2:05pm–3:50pm

Session Chair: Sajjad Bigham, Michigan TechnologicalUniversity, Houghton, MI, United States

Session Co-Chair: Enakshi Wikramanayake, University ofTexas at Austin, Austin, TX, United States

2:05pm – Theoretical Analysis of Moisture Condensation ona Cold Heat SinkTechnical Paper Publication. IMECE2018-86228Run Yan, Hongbin Ma, University of Missouri, Columbia, MO,United States

2:26pm – Membranes for Microscale Phase Separation ofCompletely Wetting LiquidsTechnical Presentation. IMECE2018-88296Mojtaba Hosseinnia, Sajjad Bigham, Michigan TechnologicalUniversity, Houghton, MI, United States

2:47pm – Sucking-Flow Condensation Heat Transfer onHierarchical Structured SurfacesTechnical Presentation. IMECE2018-87265Rongfu Wen, Yung-Cheng Lee, Ronggui Yang, University ofColorado Boulder, Boulder, CO, United States


152

3:08pm – Critical Radius of Bubble Nucleation in PoolBoilingTechnical Presentation. IMECE2018-88972Manish Gupta, Shalabh Maroo, Syracuse University,Syracuse, NY, United States

10-62 K10-3 SINGLE-PHASE ENHANCEDHEAT TRANSFER—APPLICATIONS ANDEXPERIMENTS10-62-1 Single-Phase Enhanced Heat Transfer—ApplicationsThird Floor, David L. Lawrence Convention Center, Room 327

2:05pm–3:50pm

Session Chair: Mark Kedzierski, NIST, Gaithersburg, MD,United States

Session Co-Chairs: Kashif Nawaz, Oak Ridge NationalLaboratory, Oak Ridge, TN, United States, YaroslavChudnovsky, Gas Technology Institute, Des Plaines, IL, UnitedStates

2:05pm – Heat Transfer Augmentation From ExtendedSurface Using DimplesTechnical Paper Publication. IMECE2018-87345Jay Mehta, Fay Nicole Colah, Anurag Rao, Vineeta Pendse,University of Mumbai, Mumbai, Maharashtra, India,Vyankatesh Bagal, Dwarkadas J. Sanghvi College ofEngineering, Mumbai, Maharashtra, India, Kevin Ajmera,University of Mumbai, Mumbai, Maharashtra, India

2:26pm – An Experimental and Numerical Study of HeatTransfer and Flow Characteristics of Laminar Flow in aCircular Tube With Wedge-Shaped Wavy-Tape InsertsTechnical Paper Publication. IMECE2018-88335Yunmin Liang, Peng Liu, Nianben Zheng, Feng Shan,Zhichun Liu, Wei Liu, Huazhong University of Science &Technology, China, Wuhan, China

2:47pm – Heat Transfer by a Rotating Liquid JetImpingement Cooling SystemTechnical Paper Publication. IMECE2018-88377Qi Lu, Sivapathas Parameswaran, Beibei Ren, Texas TechUniversity, Lubbock, TX, United States

3:08pm – Waterblock Modelling for GPU Liquid CoolingTechnical Paper Publication. IMECE2018-88567Jose-Carlos Vargas-Vazquez, Jose-Angel Gutierrez-Garcia,Luis Luviano-Ortiz, Abel Hernandez-Guerrero, University ofGuanajuato, Salamanca, Guanajuato, Guanajuato, Mexico,Jose-Luis Zuñiga-Cerroblanco, Juventino Rosas PolytechnicUniversity, Guanajuato, Aguascalientes, Mexico

3:29pm – Correlating Friction Factors and Nusselt Numbersfor Laminar Simultaneously Developing Flow inRectangular Plain Plate-Fin ChannelsTechnical Presentation. IMECE2018-89137Kuan-Ting Lin, Dantong Shi, Milind Jog, Raj M. Manglik,University of Cincinnati, Cincinnati, OH, United States

10-1 GENERAL10-1-1 Analysis ofThermal SystemsThird Floor, David L. Lawrence Convention Center, Room 325

4:00pm–5:45pm

Session Chair: Kevin Dowding, Sandia National Laboratories,Albuquerque, NM, United States

4:00pm – CFD Modelling of Counter-Current Packed Bedfor HDH Desalination SystemTechnical Presentation. IMECE2018-89749Clement Roy, James Klausner, Andre Benard, Sina Jahangirimamouri, Michigan State University, EastLansing, MI, United States

4:21pm – Experimental Investigation of Heat/Mass Transferand Pressure Drop in a Multi-String HumidifierTechnical Presentation. IMECE2018-89274Zezhi Zeng, Abolfazl Sadeghpour, Y. Sungtaek Ju, Universityof California, Los Angeles, Los Angeles, CA, United States

4:42pm – Measurement of Heat Transfer Coefficient inInteraction Zone of Multiple Liquid Jet ImpingementsTechnical Presentation. IMECE2018-89186Chaitanya Ghodake, Bharat Forge, Pune, Maharshtra, India

5:03pm – Numerical Study of Forced Convection inDifferent Fluids From Stationary Heated Cylinders in aSquare EnclosureTechnical Paper Publication. IMECE2018-87032Srishti Mishra, Mukul Tomar, Adeel Ahmad, Satvik Jain,Naveen Kumar, Delhi Technological University, Delhi, India

10-28 K9-8 ADVANCES IN SIMULATIONMETHODS10-28-1 K9-8 Advances in Simulation MethodsThird Floor, David L. Lawrence Convention Center, Room 324

4:00pm–5:45pm

Session Chair: Dong Liu, University of Houston, Houston, TX,United States

4:00pm – Prediction of Four-Phonon Scattering and RelatedThermal PropertiesInvited Presentation. IMECE2018-89439Tianli Feng, Purdue University, West Lafayette, IN, UnitedStates, Lucas Lindsay, Oak Ridge National Lab, Oak Ridge,TN, United States, Xiulin Ruan, Purdue University, WestLafayette, IN, United States

4:42pm – Mapping of Phonon Modes Between Two-Dimensional and Three-Dimensional SystemsTechnical Presentation. IMECE2018-86938Hyun-Young Kim, Alan McGaughey, Carnegie MellonUniversity, Pittsburgh, PA, United States


153

5:03pm – Quantifying Uncertainty in First-PrinciplesPredictions of Phonon Dispersion RelationsTechnical Presentation. IMECE2018-89140Holden Parks, Venkat Viswanathan, Alan McGaughey,Carnegie Mellon University, Pittsburgh, PA, United States

5:24pm – Determining Influential Descriptors for PolymerChain Conformation Based on Empirical Force-Fields andMolecular Dynamics SimulationsTechnical Presentation. IMECE2018-86305Ruimin Ma, Tengfei Luo, University of Notre Dame, NotreDame, IN, United States

10-30 K10-1 SINGLE-PHASE ENHANCEDHEAT TRANSFER—NUMERICAL STUDIES10-30-3 Single-Phase Enhanced Heat Transfer:Numerical Studies – IIIFourth Floor, David L. Lawrence Convention Center, Room 406

4:00pm–5:45pm

Session Chair: Sandra Boetcher, Embry-Riddle AeronauticalUniversity, Daytona Beach, FL, United States

4:00pm – Three-Tier Impingement Cooling Design for GasTurbine Blade Trailing EdgeTechnical Paper Publication. IMECE2018-86430Kishore Ranganath Ramakrishnan, Prashant Singh, SrinathEkkad, North Carolina State University, Raleigh, NC, UnitedStates

4:21pm – Experimental Investigation of Heat TransferEnhancement Through Array Jet Impingement on VariousConfigurations of High Porosity Thin Metal FoamsTechnical Paper Publication. IMECE2018-86432Srivatsan Madhavan, Prashant Singh, Srinath Ekkad, NorthCarolina State University, Raleigh, NC, United States

4:42pm – Heat Dissipator With Aztec Inspired RadialGeometryTechnical Paper Publication. IMECE2018-88570Alheli Perez-Hernandez, Luis Luviano-Ortiz, AbelHernandez-Guerrero, University of Guanajuato, Salamanca,Guanajuato, Guanajuato, Mexico, Israel Botello-Arredondo,Universidad Autónoma de Ciudad Juárez, Ciudad Juarez,Chihuahua, Mexico

10-61 K8-7 FUNDAMENTALS OF BOILINGAND CONDENSATION – II10-61-2 K8-7 Fundamentals of Condensation,Transient Boiling, and DehumidificationThird Floor, David L. Lawrence Convention Center, Room 323

4:00pm–5:45pm

Session Chair: Alexander Rattner, Pennsylvania StateUniversity, University Park, PA, United States

Session Co-Chair: Enakshi Wikramanayake, University ofTexas at Austin, Austin, TX, United States

4:00pm – Heat Transfer During Condensing DropletCoalescenceTechnical Presentation. IMECE2018-87618Sanjay Adhikari, Alexander Rattner, Pennsylvania StateUniversity, University Park, PA, United States

4:21pm – Cavitation Corrosions in Capillary Pulsating HeatPipeTechnical Paper Publication. IMECE2018-88088Steve Cai, Independent Author, Manlius, NY, United States

4:42pm – Development of In-Water, Transient BoilingDetectorTechnical Presentation. IMECE2018-88932Ezekiel Villarreal, University of Pittsburgh, Pittsburgh, PA,United States, Austin Fleming, Eric D. Larsen, Colby Jensen,Idaho National Laboratory, Idaho Falls, ID, United States, Heng Ban, University of Pittsburgh, Pittsburgh, PA, UnitedStates

5:03pm – Sodium Pumping via Condensation Within aNon-Wetting Porous StructureTechnical Presentation. IMECE2018-89197Alexander Limia, Peter Kottke, Ritesh Bhatt, Andrei G.Fedorov, Shannon K. Yee, Georgia Institute of Technology,Atlanta, GA, United States

5:24pm – Multi-String Dehumidifier, an Experimental StudyTechnical Presentation. IMECE2018-89491Abolfazl Sadeghpour, Zezhi Zeng, Y. Sungtaek Ju, Universityof California, Los Angeles, Los Angeles, CA, United States

5:45pm – Reducing Contact Time of a Bouncing Drop inJanus StateTechnical Presentation. IMECE2018-87279Chu-Yao Chou, Venkataraman Sahoo, Ching-Wen Lo, Ming-Chang Lu, National Chiao Tung University, Hsinchu,Taiwan


154

10-63 K10-4 MULTI-PHASE AND PASSIVEENHANCED HEAT TRANSFER10-63-1 Multi-Phase and Passive Enhanced HeatTransferThird Floor, David L. Lawrence Convention Center, Room 327

4:00pm–5:45pm

Session Chair: Kashif Nawaz, Oak Ridge National Laboratory,Oak Ridge, TN, United States

4:00pm – Natural Convection Heat Transfer With HorizontalRectangular Fin Array Using Straight Knurling Patterns onFins: An Experimental StudyTechnical Paper Publication. IMECE2018-86449Rahul Chikurde, Basavraj Kothavale, Maeer’s - MIT COE,Pune, Maharashtra, India, Narayan Sane, Walchand College ofEngineering, Sangli, India

4:21pm – Numerical Study of Microencapsulated PhaseChange Material SlurriesTechnical Presentation. IMECE2018-86681Jonathan Young, Western New England University, Ludlow,MA, United States, Anthony Santamaria, Jingru Benner,Western New England University, Springfield, MA, UnitedStates

4:42pm – Natural Convection in a Square Cavity UtilizingDifferent Nanofluids in Presence of Constant MagneticField With Brownian Motion EffectTechnical Paper Publication. IMECE2018-87123Misarah Abdelaziz, Wael El-Maghlany, Ashraf S. Ismail,Alexandria University, Alexandria, Egypt

5:03pm – Pool Boiling Heat Transfer Enhancement of Waterby Gold Nanoparticles With an Electrophoretic DepositionMethodTechnical Paper Publication. IMECE2018-87356Zhen Cao, Anh Duc Pham, Zan Wu, Lund University, Lund,Sweden, Tautgirdas Ruzgas, Cathrine Albèr, MalmöUniversity, Malmö, Sweden, Bengt Sunden, Lund University,Lund, Sweden

5:24pm – Experimental Study of Convective Heat Transferin Standard and Cross-Drilled Brake Discs With RadialVane and X-Lattice CoresTechnical Paper Publication. IMECE2018-86195Hongbin Yan, Northwestern Polytechnical University, Xi’an,China, Shangsheng Feng, Xi’an Jiaotong University, Xi’an,China, Wei-Tao Wu, Nanjing University of Science andTechnology, Nanjing, China, Tian Jian Lu, Xi’an JiaotongUniversity, Xi’an, China, Gongnan Xie, NorthwesternPolytechnical University, Xi’an, China


155

NOTES

156

11-2-1: Nanomaterials for Energy I

11-2-2: Nanomaterials for Energy II

11-4-1: Materials and 3D Printing for Biology and Medicine

11-6-1: Nanoengineered, Hierarchical, Multi-Scale Materials and Structures

11-7-1: Fracture and Damage: Nano- to Macro-Scale I

11-7-2: Fracture and Damage: Nano- to Macro-Scale II

11-8-1: Material Processing of Flexible Electronics, Sensors, and Devices I

11-8-2: Material Processing of Flexible Electronics, Sensors, and Devices II

11-8-3: Material Processing of Flexible Electronics, Sensors, and Devices III

11-8-4: Material Processing of Flexible Electronics, Sensors, and Devices IV

11-8-5: Material Processing of Flexible Electronics, Sensors, and Devices V

11-9-1: Materials Processing and Characterization I

11-9-2: Materials Processing and Characterization II

11-9-3: Materials Processing and Characterization III

11-9-4: Materials Processing and Characterization IV

11-9-5: Materials Processing and Characterization V

11-9-6: Materials Processing and Characterization VI

11-10-1: Bioinspired Compsoites and Structures

11-10-2: Bioinspired Materials, Structures and Applications

11-11-1: Modeling, Simulation and Design of Multifunctional Materials 1

11-11-2: Modeling, Simulation and Design of Multifunctional Materials 2

11-12-1: Mechanics in Manufacturing of Multifunctional Materials and Structures I

11-12-2: Mechanics in Manufacturing of Multifunctional Materials and Structures II

11-13-1: Multiphysics and Multiscale Modeling of Lithium-Ion Batteries

11-14-1: Multifunctional Composite Materials and Structures 1




11-15-1: Multifunctional Nanomaterials 1

11-15-2: Multifunctional Nanomaterials 2

11-18-1: Phase Transformations in Materials Processing I: Additive Manufacturing

11-18-2: PhaseTransformations in Materials Processing II: Microstructures andProperties

11-20-1: Recent Developments in Tribology

11-23-1: Materials: Genetics to Structures Plenary I

11-23-2: Materials: Genetics to Structures Plenary II

Track OrganizersToshio Nakamura, SUNY at Stony Brook,

United States Markus Buehler, MIT, United States

Topic OrganizersHanqing Jiang, Arizona State University,

United States Arunkumar Subramanian, University of

Illinois at Chicago, United States Michael Pettes, University of

Connecticut, United StatesLijie Grace Zhang, George Washington

University, United StatesShida Miao, George Washington

University, United StatesRam Mohan, North Carolina A & T

University, United States Wayne Hodo, US Army – ERDC, United

States Raghu Prakash, Indian Institute of

Technology Madras, IndiaVikram Jayaram, Indian Institute of

Science, India Ashok Saxena, University of Arkansas,

United StatesAaron Mazzeo, Rutgers, The State

University of New Jersey, UnitedStates

Qiming Wang, University of SouthernCalifornia, United States

Jianliang Xiao, University of ColoradoBoulder, United States

Woon-Hong Yeo, Georgia Institute ofTechnology, United States

Yuris Dzenis, University of Nebraska,United States

Cunjiang Yu, University of Houston,United States

Sridhar Santhanam, Villanova University,United States


Zhenhai Xia, University of North Texas,United States

Travis Shihao Hu, California StateUniversity, Los Angeles, United States

Ling Liu, Utah State University, UnitedStates


Charles Wojnar, Missouri S&T, UnitedStates

Baoxing Xu, University of Virginia, Schoolof Engineering and Applied Sciences,United States

Kevin Turner, University of Pennsylvania,United States

Weiyi Lu, Michigan State University,United States

Xianqiao Wang, University of Georgia,United States

Jun Xu, Beihang University, China Elham Sahraei Esfahani, George Mason

University, United States Junfeng Xiao, Huazhong University of

Science and Technology, ChinaJun Xu, Beihang University, China Sha Yin, Beihang University, ChinaWei Gao, University of Texas at San

Antonio, United States Pei Dong, George Mason University,

United States Baoxing Xu, University of Virginia, School

of Engineering and Applied Sciences,United States

Mohsen Asle Zaeem, Colorado School ofMines, United States

Mahmood Mamivand, Boise StateUniversity, United States

Adrian Sabau, Oak Ridge NationalLaboratory, United States

Patricia Iglesias, Rochester Institute ofTechnology, United States

Ana Eva Jimenez Ballesta, TechnicalUniversity of Cartagena, Spain

Session OrganizersRobabeh Jazaei, University of Nevada,

Las Vegas, United StatesEric Markvicka, Carnegie Mellon

University, United States Cunjiang Yu, University of Houston,

United States

Patrick Brewick, US Naval ResearchLaboratory, United States

Zahabul Islam, Pennsylvania StateUniversity, United States

Mauricio Cornejo, Escuela SuperiorPolitecnica del Litoral, Ecuador

Frank J. Shih, Seattle University, UnitedStates

Delfim Soares, University of Minho,Portugal

Muhammad Rahman, Wichita StateUniversity, United States

Philippe Geubelle, University of Illinois,United States

Nicholas J. Morris, UES, Inc./AFRL,United States



Ling Liu, Utah State University, UnitedStates

Charles Wojnar, Missouri S&T, UnitedStates

Baoxing Xu, University of Virginia, Schoolof Engineering and Applied Sciences,United States

Weiyi Lu, Michigan State University,United States

Binghe Liu, Beijing University ofAeronautics and Astronautics, China

Sha Yin, Beihang University, ChinaAkio Yonezu, Chuo University, JapanSha Yin, Beihang University, ChinaPei Dong, George Mason University,

United States Wei Gao, University of Texas at San

Antonio, United States Mohsen Asle Zaeem, Colorado School of

Mines, United States Siddhartha Pathak, University of Nevada,

Reno, United StatesPatricia Iglesias, Rochester Institute of

Technology, United States Hong Guo, Rochester Institute of

Technology, United States

TRACK 11 MATERIALS: GENETICS TOSTRUCTURESMONDAY, NOVEMBER 12

11-2 NANOMATERIALS FOR ENERGY11-2-1 Nanomaterials for Energy IThird Floor, David L. Lawrence Convention Center, Room 321

9:45am–11:30am

Session Chair: Michael Pettes, University of Connecticut,Storrs, CT, United States

Session Co-Chair: Arunkumar Subramanian, University ofIllinois at Chicago, Glen Allen, VA, United States

9:45am – Thermal Characteristic Study on Si-GeHeterostructure Interface Formed by Film-Wafer BondingTechnical Presentation. IMECE2018-86443Sien Wang, Dongchao Xu, Yue Xiao, Qing Hao, University ofArizona, Tucson, AZ, United States

10:06am – Understanding Processing DependentMorphology of P3HT:PCBM Bulk-Heterojunction Thin Filmsby Coarse-Grained Molecular SimulationsTechnical Presentation. IMECE2018-86438Joydeep Munshi, Lehigh University, Bethlehem, PA, UnitedStates, Wei Chen, Northwestern University, Evanston, IL,United States, TeYu Chien, University of Wyoming, Laramie,WY, United States, Ganesh Balasubramanian, LehighUniversity, Bethlehem, PA, United States

10:27am – Electrochemical-Mechanical Modeling andDegradation Analysis of Li-ion Batteries: Part ITechnical Presentation. IMECE2018-87409Wei Lu, University of Michigan, Ann Arbor, MI, United States

10:48am – Electrochemical-Mechanical Modeling andDegradation Analysis of Li-Ion Batteries: Part IITechnical Presentation. IMECE2018-87410Wei Lu, University of Michigan, Ann Arbor, MI, United States

11:09am – Stabilization of Graphene Dispersions byCellulose Nanocrystals ColloidsTechnical Paper Publication. IMECE2018-87830Danny Illera, Universidad del Norte, Barranquilla, Colombia,Chatura Wickramaratne, Diego Guillen, Chand Jotshi,University of South Florida, Tampa, FL, United States,Humberto Gomez, Universidad del Norte, Barranquilla,Colombia, D. Yogi Goswami, University of South Florida,Tampa, FL, United States

11-7 FRACTURE AND DAMAGE: NANO- TO MACRO-SCALE11-7-1 Fracture and Damage: Nano- to Macro-Scale IThird Floor, David L. Lawrence Convention Center, Room 320

9:45am–11:30am

Session Chair: Raghu Prakash, Indian Institute of TechnologyMadras, Chennai, India

Session Co-Chair: Robabeh Jazaei, University of Nevada, LasVegas, Las Vegas, NV, United States

9:45am – Effect of Hold-Time Interspersed With CyclicLoading on Corrosion Fatigue Crack Growth Rate of aSteel in Sodium Chloride SolutionTechnical Paper Publication. IMECE2018-86417Raghu Prakash, Indian Institute of Technology Madras,Chennai, India, Dhinakaran Sampath, University ofManchester, Manchester, United Kingdom

10:06am – Degradation of the Strength of a Grain and aGrain Boundary Due to the Accumulation of the StructuralDefects of CrystalTechnical Paper Publication. IMECE2018-87264Guoxiong Zheng, Yifan Luo, Hideo Miura, Tohoku University,Sendai, Miyagi, Japan

10:27am – Crystallinity-Induced Variation of the ElectronicCharacteristics of Electroplated Gold Thin FilmsTechnical Paper Publication. IMECE2018-87278Yutaro Nakoshi, Tohoku University, Aoba-ku, Seidai, Japan,Hideo Miura, Tohoku University, Sendai, Miyagi, Japan

10:48am – A Crack Detection and Evaluation Method forSelf-Piercing RivetingTechnical Paper Publication. IMECE2018-88403Xuyang Wang, Yudong Fang, Chongqing University,Chongqing, China, Zhenfei Zhan, Chongqing University,Livonia, MI, United States

11:09am – Energy Absorption of Cementitious CompositeIncorporating Polypropylene and Cold-Drawn Shaved SteelFiber Under Low-Velocity Impact TestTechnical Presentation. IMECE2018-88514Robabeh Jazaei, Samad Gharehdaghi, Fatemeh Azari,University of Nevada, Las Vegas, Las Vegas, NV, United States

TRACK 11 MATERIALS: GENETICS TO STRUCTURES – MONDAY, NOVEMBER 12

157

11-8 MATERIAL PROCESSING OF FLEXIBLEELECTRONICS, SENSORS, AND DEVICES11-8-1 Material Processing of Flexible Electronics,Sensors, and Devices IThird Floor, David L. Lawrence Convention Center, Room 330

9:45am–11:30am

Session Chair: Cunjiang Yu, University of Houston, Houston,TX, United States

Session Co-Chair: Jianliang Xiao, University of ColoradoBoulder, Boulder, CO, United States

9:45am – Flexible, Stretchable and Healable ElectronicsInvited Presentation. IMECE2018-89522Fabio Cicoira, Polytechnique Montréal, Montréal, QC, Canada

10:27am – Fully Rubbery Integrated Electronics andSensorsTechnical Presentation. IMECE2018-89840Cunjiang Yu, Kyoseung Sim, University of Houston, Houston,TX, United States

10:48am – Motion Artifact Free Monitoring of EMG/ECGBiopotentials Using Sub-300 nm Self-Adhesive and Ultra-Conformable Au/Parylene Thin-Film ElectrodesTechnical Presentation. IMECE2018-89610Robert Nawrocki, Purdue University, West Lafayette, IN,United States, Hanbit Jin, Sunghoon Lee, Tomoyuki Yokota,Masaki Sekino, Takao Someya, University of Tokyo, Tokyo,Japan

11:09am – Transparent, Stretchable Conductor With DirectLaser WritingTechnical Presentation. IMECE2018-89805Chengfeng Pan, Kitty Kumar, Carnegie Mellon University,Pittsburgh, PA, United States, Jianzhao Li, Unversity ofToronto, Toronto, ON, Canada, Eric Markvicka, CarnegieMellon University, Pittsburgh, PA, United States, PeterHerman, Unversity of Toronto, Toronto, ON, Canada, CarmelMajidi, Carnegie Mellon University, Pittsburgh, PA, UnitedStates

11-11 MODELING, SIMULATION, ANDDESIGN OF MULTIFUNCTIONALMATERIALS11-11-1 Modeling, Simulation and Design ofMultifunctional Materials 1Fourth Floor, David L. Lawrence Convention Center, Room 407

9:45am–11:30am

Session Chair: Ling Liu, Utah State University, Logan, UT,United States

Session Co-Chairs: Charles Wojnar, Missouri S&T, Rolla, MO,United States, Zhenhai Xia, University of North Texas, Denton,TX, United States

9:45am – Metal-Organic-Frameworks as EfficientElectrocatalysts for Oxygen Evolution Reaction: InsightsInto the Active CentersTechnical Presentation. IMECE2018-86624Chun-Yu Lin, University of North Texas, Denton, TX, UnitedStates, Shuangyin Wang, Hunan University, Changsha, China,Zhenhai Xia, University of North Texas, Denton, TX, UnitedStates

10:06am – Dimensional Control of Defect Dynamics inPerovskite Oxide SuperlatticesTechnical Presentation. IMECE2018-89356Lipeng Zhang, Beijing University of Chemical Technology,Beijing, China, Haixuan Xu, Isaac Bredeson, University ofTennessee, Knoxville, TN, United States, Valentino R. Cooper,Paul R. Kent, Oak Ridge National Laboratory, Oak Ridge, TN,United States

10:27am – Numerical Investigation on PercolationThreshold of CNT-Reinforced Conductive CompositesBased on Three-Dimensional Monte Carlo MethodTechnical Paper Publication. IMECE2018-86794Zhuangzhuang He, Lijun Li, Beihang University, Beijing,China, Taikun Wang, Yantao Wang, Henan Key Laboratory of Underwater Intelligent Equipment, ZhengzhouElectromechanical Engineering, Zhengzhou, China,Xudong Yang, Wenming Yang, Beihang University, Beijing,China

10:48am – Dexterous Hybrid Robotics for High PrecisionApplicationsTechnical Paper Publication. IMECE2018-86856Mitch Crowther, Nolan Jackson, Minchul Shin, GeorgiaSouthern University, Statesboro, GA, United States

11:09am – Uncertainty Quantification of Artificial NeuralNetwork Based Machine Learning PotentialsTechnical Paper Publication. IMECE2018-88071Yumeng Li, Weirong Xiao, Pingfeng Wang, University ofIllinois at Urbana-Champaign, Urbana, IL, United States


158

11-2 NANOMATERIALS FOR ENERGY11-2-2 Nanomaterials for Energy IIThird Floor, David L. Lawrence Convention Center, Room 321

1:45pm–3:30pm

Session Chair: Arunkumar Subramanian, University of Illinoisat Chicago, Glen Allen, VA, United States

Session Co-Chair: Michael Pettes, University of Connecticut,Storrs, CT, United States

1:45pm – Energy Sensitivity of Charge Carriers forDetecting Scattering and TransportTechnical Presentation. IMECE2018-88970Shuang Tang, State University of New York, Utica, NY, UnitedStates

2:06pm – Guiding Principles for Designing Highly-EfficientMetal-Free Carbon CatalystsTechnical Presentation. IMECE2018-89358Lipeng Zhang, Beijing University of Chemical Technology,Beijing, China, Zhenhai Xia, University of North Texas, Denton,TX, United States

2:27pm – Advanced FeOOH-MWCNTS Composite NegativeElectrodes With High Areal Capacitance for AsymetricSupercapacitorsTechnical Presentation. IMECE2018-89814Ri Chen, Rakesh Sahu, Igor Zhitomirsky, Ishwar K. Puri,McMaster University, Hamilton, ON, Canada

2:48pm – Entropy Generation Minimization in PolyurethaneSilica Nano-Composite MembraneTechnical Presentation. IMECE2018-89848Omar Almahmoud, Tae-Youl Choi, University of North Texas,Denton, TX, United States

3:09pm – Oxygen and Water Vapor Effects onPhotoelectronic Properties of Monolayer TungstenDisulfide via Chemical Vapor DepositionTechnical Presentation. IMECE2018-89869Hanyu Zhang, Jeremy Dunklin, Obadiah Reid, SanjiniNanayakkara, Jeffrey Blackburn, Elisa M. Link, NationalRenewable Energy Laboratory, Golden, CO, United States

11-7 FRACTURE AND DAMAGE: NANO-TO MACRO-SCALE11-7-2 Fracture and Damage: Nano- to Macro-Scale IIThird Floor, David L. Lawrence Convention Center, Room 320

1:45pm–3:30pm

Session Chair: Eric Markvicka, Carnegie Mellon University,Pittsburgh, PA, United States

Session Co-Chair: Ram Mohan, North Carolina A&TUniversity, Greensboro, NC, United States

1:45pm – Tensile Deformation Mechanisms in Nickel-CobaltCore-Shell Nanowires via Molecular Dynamics SimulationsTechnical Presentation. IMECE2018-89138Ali Shiave, University of North Carolina at Greensboro,Greensboro, NC, United States, Ram Mohan, North CarolinaA&T University, Greensboro, NC, United States

2:06pm – Stiffness Percolation at High Crack Densities:Fragmentation and InterlockingTechnical Presentation. IMECE2018-89298Anirban Pal, Catalin Picu, Rensselaer Polytechnic Institute,Troy, NY, United States

2:27pm – Damage Detection and Localization in Soft-Matter SystemsTechnical Presentation. IMECE2018-89585Eric Markvicka, Carnegie Mellon University, Pittsburgh, PA,United States, Michael D. Bartlett, Ravi Tutika, Iowa StateUniversity, Ames, IA, United States, Carmel Majidi, CarnegieMellon University, Pittsburgh, PA, United States

2:48pm – Investigating Damage Initiation Sites in MetallicMicrostructures Using Atomistic Modeling of InterfacesTechnical Presentation. IMECE2018-89613Jacob Tavenner, Colorado School of Mines, Golden, CO,United States, Ian Bakst, Colorado State University, FortCollins, CO, United States, Garritt Tucker, Colorado School ofMines, Golden, CO, United States, Christopher Weinberger,Colorado State University, Fort Collins, CO, United States

3:09pm – Influences of Plasticity-Induced Crack Closure onFatigue Crack Healing of Carbon Steel With Heat TreatmentTechnical Paper Publication. IMECE2018-86650Eiichi Hamada, Yuto Furuya, Atsushi Hosoi, WasedaUniversity, Tokyo, Shinjuku, Japan, Yuji Morita, NipponPneumatic Mfg. Co., Ltd., Mie, Nabari, Japan, HiroyukiKawada, Waseda University, Tokyo, Shinjuku, Japan

11-8 MATERIAL PROCESSING OF FLEXIBLEELECTRONICS, SENSORS, AND DEVICES11-8-2 Material Processing of Flexible Electronics,Sensors, and Devices IIThird Floor, David L. Lawrence Convention Center, Room 330

1:45pm–3:30pm

Session Chair: Jianliang Xiao, University of Colorado Boulder,Boulder, CO, United States

Session Co-Chair: Qiming Wang, University of SouthernCalifornia, Los Angeles, CA, United States

1:45pm – Cellulose in Electrical and ElectrochemicalFlexible DevicesInvited Presentation. IMECE2018-89411Luis Pereira, CENIMAT/I3N, Caparica, Portugal

2:27pm – Nanoporous Paper-Based Electrodes forBiosensingTechnical Presentation. IMECE2018-89592Ramendra Pal, Tongfen Liang, Thomas McGovern,Samantha Moy, Mehdi Javanmard, Aaron Mazzeo, Rutgers,The State University of New Jersey, Piscataway, NJ, UnitedStates


159

2:48pm – Rehealable, Fully Recyclable and MalleableElectronic SkinTechnical Presentation. IMECE2018-89028Zhanan Zou, Jianliang Xiao, Wei Zhang, University ofColorado Boulder, Boulder, CO, United States

3:09pm – A Field Deployable Biosensor for Virus DetectionUsing DNA HybridizationTechnical Presentation. IMECE2018-89833Jessica Snyder, Trevor Kalkus, Universities Space ResearchAssociation, Sunnyvale, CA, United States, Jesica Urbina,Nils Averesch, Universities Space Research Association,Mountain View, CA, United States, David Biehert, USGeological Survey, Madison, WI, United States, LynnRothschild, NASA, Moffett Field, CA, United States

11-11 MODELING, SIMULATION, ANDDESIGN OF MULTIFUNCTIONALMATERIALS11-11-2 Modeling, Simulation and Design ofMultifunctional Materials 2Fourth Floor, David L. Lawrence Convention Center, Room 407

1:45pm–3:30pm

Session Chair: Ling Liu, Utah State University, Logan, UT,United States

Session Co-Chairs: Charles Wojnar, Missouri S&T, Rolla, MO,United States, Zhenhai Xia, University of North Texas, Denton,TX, United States

1:45pm – A Multiphysics Thermoelastoviscoplastic DamageCoupled With a Magnetism Internal State Variable ModelTechnical Presentation. IMECE2018-87945Mounia Malki, Mark Horstemeyer, Michael Baskes,Yucheng Liu, Lei Chen, Mississippi State University, Starkville,MS, United States

2:06pm – Viscoelastic Behavior of Carbon Nanotube Yarnsand Twisted CoilsTechnical Paper Publication. IMECE2018-88095Pouria Khanbolouki, Mehran Tehrani, University of NewMexico, Albuquerque, NM, United States

2:27pm – Multi-field, Multi-layer, and SegmentedComposite Beam Optimization for Shape, Work, and CostTechnical Presentation. IMECE2018-89910Anil Erol, Mary Frecker, Paris Von Lockette, PennsylvaniaState University, University Park, PA, United States

2:48pm – A Thermo-Electro-Elasto-Viscoplastic DamageInternal State Variable (ISV) Model for Ductile MetalsTechnical Paper Publication. IMECE2018-86598Nikolay Dimitrov, Yucheng Liu, Mark Horstemeyer,Mississippi State University, Starkville, MS, United States

3:09pm – Hybrid Alumina Composites for Cutting ToolInserts: Material Design and DevelopmentTechnical Paper Publication. IMECE2018-87255Taha Waqar, Syed Sohail Akhtar, Abul Fazal M. Arif, KhaledAl-Athel, King Fahd University of Petroleum & Minerals,Dhahran, Saudi Arabia

11-4 MATERIALS AND 3D PRINTING FORBIOLOGY AND MEDICINE11-4-1 Materials and 3D Printing for Biology andMedicineFourth Floor, David L. Lawrence Convention Center, Room 407

3:45pm–5:30pm

Session Chair: Lijie Grace Zhang, George WashingtonUniversity, Washington, DC, United States

3:45pm – 3D Printed Shape-Changing CardiovascularImplants for Accommodating GrowthTechnical Presentation. IMECE2018-89032Ozan Erol, Johns Hopkins University, Aberdeen, MD, UnitedStates, Emilio Bachtiar, Azra Horowitz, Sung Kang, JohnsHopkins University, Baltimore, MD, United States

4:06pm – Four Dimensional Printing of Smart TissueConstructsTechnical Presentation. IMECE2018-86412Shida Miao, Haitao Cui, Se Jun Lee, Xuan Zhou, Lijie GraceZhang, George Washington University, Washington, DC,United States

4:27pm – A Pufferfish-Inspired Ingestible Hydrogel MachineTechnical Presentation. IMECE2018-88955Xinyue Liu, Shaoting Lin, Christoph Steiger, Xuanhe Zhao,Massachusetts Institute of Technology, Cambridge, MA, UnitedStates

4:48pm – A Novel Microlaser Based Plasmonic-PolymerHybrid ResonatorTechnical Paper Publication. IMECE2018-86998Maurizio Manzo, Ryan Schwend, University of North Texas,Denton, TX, United States

5:09pm – 3D Bioprinting of Thick Cardiac Constructs WithPerfusable VesselsTechnical Presentation. IMECE2018-86261Lijie Grace Zhang, Haitao Cui, George Washington University,Washington, DC, United States, Muhammad Mohiuddin,University of Maryland, Baltimore, MD, United States


160

11-8 MATERIAL PROCESSING OF FLEXIBLEELECTRONICS, SENSORS, AND DEVICES11-8-3 Material Processing of Flexible Electronics,Sensors, and Devices IIIThird Floor, David L. Lawrence Convention Center, Room 330

3:45pm–5:30pm

Session Chair: Qiming Wang, University of SouthernCalifornia, Los Angeles, CA, United States

Session Co-Chair: Yuris Dzenis, University of Nebraska–Lincoln, Lincoln, NE, United States

3:45pm – Flexible Beta-Ga2O3 High Power ElectronicsInvited Presentation. IMECE2018-89204Jung-Hun Seo, University at Buffalo, State University of NewYork, Buffalo, NY, United States

4:27pm – Printed Electronics From Low-DimensionalNanomaterials—Toward Low-Cost Transistors, Sensors,and Energy DevicesTechnical Presentation. IMECE2018-89991Changyong Cao, Michigan State University, East Lansing, MI,United States

4:48pm – Stretchable Silver Nanowire Micro-Conductors byDirect Inkjet PrintingTechnical Presentation. IMECE2018-89251Qijin Huang, Karam N. Al-Milaji, Hong Zhao, VirginiaCommonwealth University, Richmond, VA, United States

5:09pm – Tunable Electrical Properties of Embossed,Cellulose-Based PaperTechnical Presentation. IMECE2018-89695Tongfen Liang, Xiyue Zou, Jiaqi Liu, Maame Assasie,Wei-Jian Guo, Chuyang Chen, Jingjin Xie, Max Tenorio,Rutgers, The State University of New Jersey, Piscataway,NJ, United States, Assimina Pelegri, Rutgers, The StateUniversity of New Jersey, East Brunswick, NJ, United States,Aaron Mazzeo, Rutgers, The State University of New Jersey,Piscataway, NJ, United States

11-9 MATERIALS PROCESSING ANDCHARACTERIZATION11-9-1 Materials Processing and Characterization IThird Floor, David L. Lawrence Convention Center, Room 320

3:45pm–5:30pm

Session Chair: Sridhar Santhanam, Villanova University,Collegeville, PA, United States

Session Co-Chair: Raghu Prakash, Indian Institute ofTechnology Madras, Chennai, India

3:45pm – Influence of Thermal Ratcheting on the Creep andMechanical Properties of High Density Polyethylene (HDPE)Technical Paper Publication. IMECE2018-86043Rahul Palaniappan Kanthabhabha Jeya, Abdel-HakimBouzid, École Technologie Superieure, Montreal, QC, Canada

4:06pm – Investigation of Process Parameters on DrySliding Wear of Self-Lubricating Metal Matrix CompositesTechnical Paper Publication. IMECE2018-86248Senthil Kumar Velukkudi Santhanam, College OfEngineering, Guindy, Chennai, India, Dhanashekar Manickam,Karthikeyan S., Anna University, Chennai, Tamil Nadu, India

4:27pm – Effect of Micro (Banana) and Nano (SiC) Fillers onMechanical Behaviors of Basalt/Epoxy Hybrid CompositesTechnical Paper Publication. IMECE2018-86268Senthil Kumar Velukkudi Santhanam, College of Engineering,Guindy, Chennai, India, Bharani Srikanth P., PrakashSampath, Mohan Bangaru, Anna University, Chennai, India

4:48pm – Localized Fatigue Response Evaluation of WeldRegions Through Cyclic Indentation StudiesTechnical Paper Publication. IMECE2018-86420Raghu Prakash, Indian Institute of Technology Madras,Chennai, India, Krishna Madhavan, SASTRA University,Thanjavur, India, Anirudh Prakash, National Institute ofTechnology Tiruchirappalli, Tiruchirappalli, India, PankajDhaka, Indian Institute of Technology Madras, Chennai,Tamilnadu, Tamilnadu, India

5:09pm – Investigations on the Structure and Properties ofthe Hot Extruded AA2014-Nano SiCp CompositeTechnical Paper Publication. IMECE2018-87237Karibeeran Shanmuga Sundaram, Raja Manickam S,Ramaiyan Sankar, Anna University, Chennai, Tamilnadu, India,Dhanalakshmi Sathishkumar, CVRDE, Chennai, Tamilnadu,India

11-15 MULTIFUNCTIONALNANOMATERIALS11-15-1 Multifunctional Nanomaterials 1Third Floor, David L. Lawrence Convention Center, Room 321

3:45pm–5:30pm

Session Chair: Pei Dong, George Mason University, Fairfax,VA, United States

Session Co-Chair: Wei Gao, University of Texas at SanAntonio, San Antonio, TX, United States

3:45pm – An Elastothermoviscoplasticity AnisotropicDamage Model for Short Fiber Reinforced PolymerCompositesTechnical Paper Publication. IMECE2018-86286Ge He, Yucheng Liu, Mississippi State University, MississippiState, MS, United States, Mark Horstemeyer, Douglas J.Bammann, Mississippi State University, Starkville, MS, UnitedStates

4:06pm – Tailoring the Property of Nanocomposites UsingNickel Coated Carbon Nanotube and Magnetic FieldTechnical Presentation. IMECE2018-89727Ahmed M. Abdalla, Rakesh Sahu, Ishwar K. Puri, McMasterUniversity, Hamilton, ON, Canada


161

4:27pm – Hybrid Nanomaterials and Their Applications inEnergy and Water AreasTechnical Presentation. IMECE2018-86585Pei Dong, George Mason University, Fairfax, VA, UnitedStates, Jun Lou, Rice University, Houston, TX, United States

4:48pm – Functionalized Cellulose Nanocrystals forImproving the Mechanical Properties of Poly(Lactic Acid)Technical Paper Publication. IMECE2018-87691Jamileh Shojaeiarani, Dilpreet Bajwa, North Dakota StateUniversity, Fargo, ND, United States

5:09pm – Phase Transition of Monolayer MoTe2: The Roleof StressTechnical Presentation. IMECE2018-87969Wei Gao, University of Texas at San Antonio, San Antonio, TX,United States


11-23 PLENARY11-23-1 Materials: Genetics to Structures Plenary IThird Floor, David L. Lawrence Convention Center, Room 307

8:00am–8:45am

8:00am – Biological Materials and Mechanics: Challengesand OpportunitiesPlenary Presentation. IMECE2018-90108Marc Meyers, University of California San Diego, La Jolla, CA,United States

11-23 PLENARY11-23-2 Materials: Genetics to Structures Plenary IIThird Floor, David L. Lawrence Convention Center, Room 307

9:00am–9:45am

9:00am – The Future of Aerospace Materials: Challengesand OpportunitiesPlenary Presentation. IMECE2018-90109Richard Vaia, Air Force Research Labortory, FunctionalMaterials Division, WPAFB, OH, United States

11-8 MATERIAL PROCESSING OF FLEXIBLEELECTRONICS, SENSORS, AND DEVICES11-8-4 Material Processing of Flexible Electronics,Sensors, and Devices IVThird Floor, David L. Lawrence Convention Center, Room 333

10:00am–11:45am

Session Chair: Yuris Dzenis, University of Nebraska–Lincoln,Lincoln, NE, United States

Session Co-Chair: Woon-Hong Yeo, Georgia Institute ofTechnology, Atlanta, GA, United States

10:00am – Large-Scale Hybrid MonolithicNanomanufacturing of Liquid-Solid Heterojunction Devicesfor Self-Powered Smart SkinInvited Presentation. IMECE2018-89581Wenzhuo Wu, Purdue University, West Lafayette, IN, UnitedStates

10:42am – EGaIn–Metal Interfacing for MicroelectronicsIntegration in Liquid Metal-Based Stretchable ElectronicsTechnical Presentation. IMECE2018-89634Kadri Bugra Ozutemiz, James Wissman, O. BurakOzdoganlar, Carmel Majidi, Carnegie Mellon University,Pittsburgh, PA, United States

11:03am – Molecular Configuration of Solution-ProcessedInterfaces Between Inorganic-Organic Hybrid Perovskiteand Electron Transport LayerTechnical Presentation. IMECE2018-88120M.F.N. Taufique, Washington State University Pullm WA,United States, Samrat Choudhury, University of Idaho,Moscow, ID, United States, Soumik Banerjee, WState University

TRACK 11 MATERIALS: GENETICS TO STRUCTURES – MONDAY, NOVEMBER 12 / TUESDAY, NOVEMBER 13

162

11:24am – Additive Manufacturing of PolymerNanocomposites With In Situ Strain Sensing CapabilityTechnical Paper Publication. IMECE2018-86263Mohammad Abshirini, Mohammad Charara, Yingtao Liu,Mrinal Saha, M. Cengiz Altan, University of Oklahoma,Norman, OK, United States

11-9 MATERIALS PROCESSING ANDCHARACTERIZATION11-9-2 Materials Processing and Characterization IIThird Floor, David L. Lawrence Convention Center, Room 331

10:00am–11:45am

Session Chair: Patrick Brewick, U.S. Naval ResearchLaboratory, Washington, DC, United States

Session Co-Chair: Zahabul Islam, Pennsylvania StateUniversity, State College, PA, United States

10:00am – Low Temperature Annealing of Metals WithElectrical Wind Force EffectsTechnical Presentation. IMECE2018-86350Daudi Waryoba, Pennsylvania State University, DuBois, PA,United States, Zahabul Islam, Baoming Wang, PennsylvaniaState University, State College, PA, United States, Md. Haque,Pennsylvania State University, University Park, PA, UnitedStates

10:21am – Influence of Ca-Ba and Sr Base Inoculants onMetallurgical and Mechanical Properties of Grey andDuctile Cast IronsTechnical Paper Publication. IMECE2018-86448Dhruv Patel, Aditya Silver Oak Institute of Technology,Ahmedabad, India, Devendra Parmar, Silver Oak College ofEngineering and Technology, Rajkot, India, SiddharthsinhJadeja, Aditya Silver Oak Institute of Technology, RajkotGujarat, India

10:42am – Modeling the Influence of Microstructure onStress Distributions and Concentrations in PittingCorrosionTechnical Paper Publication. IMECE2018-86465Patrick Brewick, Andrew Geltmacher, U.S. Naval ResearchLaboratory, Washington, DC, United States, Siddiq Qidwai,National Science Foundation, Arlington, VA, United States

11:03am – Hardness Improvement of Binderless BoronNitride Composites Through Hybrid CO2 Laser–WaterjetHeat TreatmentTechnical Presentation. IMECE2018-86740Jingnan Zhao, Tianjin University of Science and Technology,Tianjin, China, Pranav Shrotriya, Iowa State University, Ames,IA, United States, Jian Guo, Xiaolei Ma, Tianjin University ofScience and Technology, Tianjin, China

11:24am – Fatigue Crack Growth Rate Studies on StainlessSteel WeldsTechnical Paper Publication. IMECE2018-86915Manuel Thomas, Raghu Prakash, Ganesh Sundararaman,Indian Institute of Technology Madras, Chennai, Tamilnadu,India, Vasudevan Muthukumaran, Indira Gandhi Centre forAtomic Research, Kalpakkam, Tamilnadu, India

11-12 MECHANICS IN MANUFACTURING OFMULTIFUNCTIONAL MATERIALS ANDSTRUCTURES11-12-1 Mechanics in Manufacturing ofMultifunctional Materials and Structures IThird Floor, David L. Lawrence Convention Center, Room 334

10:00am–11:45am

Session Chair: Baoxing Xu, University of Virginia,Charlottesville, VA, United States

Session Co-Chair: Weiyi Lu, Michigan State University,East Lansing, MI, United States

10:00am – Material Interactions and Self-AssemblyThrough a Dual-Droplet Inkjet Printing ProcessInvited Presentation. IMECE2018-88766Hong Zhao, Virginia Commonwealth University, Richmond, VA,United States

10:21am – Structurally Robust Thermal Insulating Coatingfor Improving Building Energy EfficiencyTechnical Presentation. IMECE2018-86599Rui Kou, Ying Zhong, Meng Wang, Yu Qiao, University ofCalifornia San Diego, La Jolla, CA, United States

10:42am – Scale-Up Processing and Testing ofMultifunctional Current Collector in Large Format Lithium-Ion Battery Pouch CellsTechnical Presentation. IMECE2018-86107Meng Wang, Yu Qiao, University of California San Diego, La Jolla, CA, United States

11:03am – Strain Engineering of 2D Materials: The EssentialRole of InterfaceTechnical Presentation. IMECE2018-89079Zhaohe Dai, University of Texas at Austin, Austin, TX, UnitedStates

11:24am – Liquid Evaporation-Driven Self-Folding of Free-Standing GrapheneTechnical Presentation. IMECE2018-89109Qingchang Liu, University of Virginia, Charlottesville, VA,United States

TRACK 11 MATERIALS: GENETICS TO STRUCTURES – TUESDAY, NOVEMBER 13

163

11-14 MULTIFUNCTIONAL COMPOSITEMATERIALS AND STRUCTURES11-14-4 Multifunctional Composite Materials andStructures 4Fourth Floor, David L. Lawrence Convention Center, Room 407

10:00am–11:45am

Session Chair: Jun Xu, Beihang University, Beijing, China

Session Co-Chair: Sha Yin, Beihang University, Beijing, China

10:00am – Effect of Nail Penetration Rate on Short Circuitand Thermal Runaway Behavior of Lithium-Ion BatteryTechnical Presentation. IMECE2018-87453Zhiguo Hong, Sha Yin, Jun Xu, Beihang University, Beijing,China

10:21am – A Detailed Mechanical Model of 18650 Lithium-Ion BatteryTechnical Presentation. IMECE2018-89127Lubing Wang, Jun Xu, Jia Yikai, Beihang University, Beijing,China

10:42am – Fabrication and Properties Characterization ofComposite Structural ElectrolyteTechnical Presentation. IMECE2018-89945Zihan Hu, Sha Yin, Huitian Wang, Haoyu Chen, BeihangUniversity, Beijing, Beijing, China

11:03am – Flatwise Mechanical Behavior and EnergyAbsorption of Tube Integrated HoneycombsTechnical Presentation. IMECE2018-89942Yaobo Wu, Haoyu Chen, Huitian Wang, Sha Yin, BeihangUniversity, Beijing, China

11:24am – Damping Characterization of HierarchicalCompositesTechnical Presentation. IMECE2018-89641Suma Ayyagari, Marwan Al-Haik, Embry-Riddle AeronauticalUniversity, Daytona Beach, FL, United States

11-9 MATERIALS PROCESSING ANDCHARACTERIZATION11-9-3 Materials Processing and Characterization IIIThird Floor, David L. Lawrence Convention Center, Room 331

1:45pm–3:30pm

Session Chair: Mauricio Cornejo, Escuela Superior Politecnicadel Litoral, Guayaquil, Ecuador

Session Co-Chair: Frank J. Shih, Seattle University, Seattle,WA, United States

1:45pm – Anti-Corrosive Coating Using Recycled HighDensity Polyethylene for Automotive ChassisTechnical Paper Publication. IMECE2018-86498Joshua Bachert, Ahm Rahman, Ma’moun Abu-Ayyad,Pennsylvania State Harrisburg, Middletwon, PA, United States

2:06pm – A Study on the Corrosion and MechanicalProperties of an Al6063 Reinforced With Egg Shell Ash andRice Husk AshTechnical Paper Publication. IMECE2018-86662Nosa Idusuyi, University of Ibadan, Ibandan, Oyo, Nigeria,Peter Oviroh, University of Johannesburg, Johannesburg,South Africa, Adetoye Henry Adekoya, University of Ibadan,Ibandan, Oyo, Nigeria

2:27pm – Assessment of Induced Delamination During End-Milling of Natural Fiber Reinforced Composites: A Statistical AnalysisTechnical Paper Publication. IMECE2018-86978Khalid Alzebdeh, Mahmoud Nassar, Nasr Al-Hinai, SultanQaboos University, Al-Khod, Oman

2:48pm – Effect of Calcium Hydroxide and Water to SolidRatio on Compressive Strength of Mordenite-BasedGeopolymer and the Evaluation of Its ThermalTransmission PropertyTechnical Paper Publication. IMECE2018-87625Mauricio Cornejo, Bolivar Togra, Haci Baykara, GuillermoE. Soriano, Cecilia Paredes, Escuela Superior Politecnica delLitoral, Guayaquil, Guayas, Ecuador, Jan Elsen, KatholiekeUniversitiet Leuven, Leuven, Belgium

3:09pm – Recycling of Thermoplastic Waste in the IndustryTechnical Presentation. IMECE2018-87979Sadek Salem Cherif, University of Sciences and Technologyof Oran Mohamed Boudiaf, Tizi-Ouzou, Algeria

11-10 BIOINSPIRED MATERIALS,STRUCTURES AND APPLICATIONS11-10-1 Bioinspired Composites and StructuresThird Floor, David L. Lawrence Convention Center, Room 333

1:45pm–3:30pm

Session Chair: Seyed Allameh, Northern Kentucky University,Highland Heights, KY, United States

Session Co-Chair: Zhenhai Xia, University of North Texas,Denton, TX, United States

1:45pm – Mechanical Properties of 3D Printed BiomimickedCompositesTechnical Paper Publication. IMECE2018-86309Seyed Allameh, Northern Kentucky University, Newport, KY,United States, Roger Miller, Hadi Allameh, Northern KentuckyUniversity, Highland Heights, KY, United States

2:06pm – Bioinspired Materials for Water Vapor HarvestingTechnical Presentation. IMECE2018-86828Yiyang Wan, University of North Texas, Denton, TX, UnitedStates, Yong Gao, Northwestern Polytechnical University,Xi’an, Shannxi, China, Zhenhai Xia, University of North Texas,Denton, TX, United States


164

2:27pm – Magnetically Actuated Dynamic IridescenceInspired by the Neon TetraTechnical Presentation. IMECE2018-87100Zhiren Luo, North Carolina State University, Raleigh, NC,United States, Benjamin Evans, Elon University, Elon, NC,United States, Chih-Hao Chang, North Carolina StateUniversity, Raleigh, NC, United States

2:48pm – Enhancing Light Transmission in Nacre-InspiredMultilayer Composites Using Interfacial NanostructuresTechnical Presentation. IMECE2018-87506Yi-An Chen, Chih-Hao Chang, North Carolina StateUniversity, Raleigh, NC, United States, Sharan/S.V. Naidu,GlobalFoundries, Raleigh, NC, United States, Zhiren Luo,North Carolina State University, Raleigh, NC, United States

11-12 MECHANICS IN MANUFACTURING OFMULTIFUNCTIONAL MATERIALS ANDSTRUCTURES11-12-2 Mechanics in Manufacturing ofMultifunctional Materials and Structures IIThird Floor, David L. Lawrence Convention Center, Room 334

1:45pm–3:30pm

Session Chair: Weiyi Lu, Michigan State University, EastLansing, MI, United States

Session Co-Chair: Baoxing Xu, University of Virginia,Charlottesville, VA, United States

1:45pm – Micro- and Macro-Modeling and Applications ofSoft Magneto-Active ElastomersInvited Presentation. IMECE2018-89993Yin Liu, Changyong Cao, Michigan State University, EastLansing, MI, United States

2:06pm – Adhesion Tuning Through Embedded PneumaticChannelsTechnical Presentation. IMECE2018-89897Aoyi Luo, University of Pennsylvania, Philadelphia, PA, UnitedStates, Amir M. Nasab, University of Nevada, Reno, Reno, NV,United States, Wanliang Shan, University of Nevada Reno,Reno, NV, United States, Kevin Turner, University ofPennsylvania, Philadelphia, PA, United States

2:27pm – Mechanics of Liquid-Assisted Mechanical Peelingof 2D MaterialsTechnical Presentation. IMECE2018-89108Yue Zhang, University of Virginia, Charlottesville, VA, UnitedStates

2:48pm – Perturbation Analysis of Surface AmorphousLayer FomationTechnical Presentation. IMECE2018-88854Rahul Basu, VTU, Bangalore, Ka, India

3:09pm – Analytical Investigation of the Stiffness ofHomogenous Isotropic Mechanical Materials With DifferentCross SectionsTechnical Paper Publication. IMECE2018-86197Michael Agarana, Covenant University, Ota, Ogun State,Nigeria, Esther Akinlabi, University of Johannesburg,Johannesburg, Gauteng Province, South Africa

11-15 MULTIFUNCTIONALNANOMATERIALS11-15-2 Multifunctional Nanomaterials 2Fourth Floor, David L. Lawrence Convention Center, Room 407

1:45pm–3:30pm

Session Chair: Wei Gao, University of Texas at San Antonio,San Antonio, TX, United States

1:45pm – Application of Cellulose Nanocrystals and ZincOxide as Green Fire Retardant in High Density PolyethyleneTechnical Presentation. IMECE2018-88214Ghazal Vahidi, Dilpreet Bajwa, Jamileh Shojaeiarani, NorthDakota State University, Fargo, ND, United States

2:06pm – Investigating Effects of Graphene Nanoinclusionsfor Improved Desalination Rates of Salt Water Under SolarHeatTechnical Paper Publication. IMECE2018-88637Vinay Patil, Aybala Usta, Muhammad Rahman, RamazanAsmatulu, Wichita State University, Wichita, KS, United States

2:27pm – One-Step Flame Synthesis of W/Moly/N DopedTitanium Dioxide Nanoparticles With EnhancedPhotocatalytic ActivityTechnical Presentation. IMECE2018-89617Yuqian Zhang, Zhizhong Dong, Gang Xiong, Stephen Tse,Bernard Kear, Rutgers, The State University of New Jersey,Piscataway, NJ, United States

2:48pm – Designing Stiffness-Switching ThermoplasticNanocomposites for Wearable and Robotic ApplicationsTechnical Presentation. IMECE2018-89671Steven Rich, Carmel Majidi, Carnegie Mellon University,Pittsburgh, PA, United States


165

11-8 MATERIAL PROCESSING OF FLEXIBLEELECTRONICS, SENSORS, AND DEVICES11-8-5 Material Processing of Flexible Electronics,Sensors, and Devices VThird Floor, David L. Lawrence Convention Center, Room 304

3:45pm–5:30pm

Session Chair: Woon-Hong Yeo, Georgia Institute ofTechnology, Atlanta, GA, United States

Session Co-Chair: Aaron Mazzeo, Rutgers, The StateUniversity of New Jersey, Piscataway, NJ, United States

3:45pm – A Highly Scalable Additive Printing Process forHigh-Performance and Flexible Thermoelectric Materialsand DevicesTechnical Presentation. IMECE2018-87747Yanliang Zhang, University of Notre Dame, Notre Dame, IN,United States, Tony Varghese, Boise State University, Boise,ID, United States, Mortaza Saeidi-Javash, University of NotreDame, Notre Dame, IN, United States

4:06pm – Processing of Surface Modified Barium TitanateFlexible Nanocomposite FilmsTechnical Presentation. IMECE2018-90025Kimberly Cook-Chennault, Rutgers, The State University ofNew Jersey, Piscataway, NJ, United States

4:27pm – Piezoelectric Polymer Thin Films With ArchitectedCuts for Enhancing Flexibility and Ambient Wind EnergyHarvestingTechnical Presentation. IMECE2018-89034Lichen Fang, Jing Li, Zeyu Zhu, Sung Kang, Johns HopkinsUniversity, Baltimore, MD, United States

4:48pm – An Integrated Wearable Device based on SilverNanowire NanocompositesTechnical Presentation. IMECE2018-89918Shanshan Yao, Bryan Vogel, Yong Zhu, North Carolina StateUniversity, Raleigh, NC, United States

11-9 MATERIALS PROCESSING ANDCHARACTERIZATION11-9-4 Materials Processing and Characterization IVThird Floor, David L. Lawrence Convention Center, Room 331

3:45pm–5:30pm

Session Chair: Delfim Soares, University of Minho, Guimaraes,Portugal

Session Co-Chair: Raghu Prakash, Indian Institute ofTechnology Madras, Chennai, India

3:45pm – Experimental Investigating the Impact of IonicLiquid on PET’s PropertiesTechnical Paper Publication. IMECE2018-86854Waleed Ahmed, United Arab Emirates University, Al Ain,United Arab Emir.

4:06pm – Exploring the Use of Cinnamate Derivatives forBulk-Mediated Photo-Alignment of Liquid CrystalElastomersTechnical Presentation. IMECE2018-87111Matthew L. Smith, Brian D. Simonich, Erik Johnsen, Alyssa VanZanten, Hope College, Holland, MI, United States

4:27pm – Effect of Constrained Groove Pressing onMechanical Properties of Nitinol AlloyTechnical Paper Publication. IMECE2018-87295Shanthan Kumar Padisala, Akhil Bhardwaj, Kamal Poluri,Amit Kumar Gupta, BITS Pilani Hyderabad Campus,Hyderabad, India

4:48pm – Influence of the Microstructure on the CreepBehaviour of Tin-Silver-Copper SolderTechnical Paper Publication. IMECE2018-87789Pedro Ribeiro, Delfim Soares, University of Minho,Guimarães, Portugal, Maria Cerqueira, Physics Department,Braga, Portugal, Senhorinha Teixeira, Daniel Barros, JoseTeixeira, Pauline Capela, University of Minho, Guimarães,Portugal, Francisco Macedo, University of Minho, Braga,Portugal

5:09pm – A Three-Dimensional Nested Reinforcing Mesh inElastomers for Crashworthy ApplicationsTechnical Paper Publication. IMECE2018-88471David J. Traina, Thomas C. Ekstrom, Owen F. VanValkenburgh, Jean-Paul R. Wallis, David S. Schulman, Emily R. Mather, Nathan K. Yasuda, Frank J. Shih, SeattleUniversity, Seattle, WA, United States

11-10 BIOINSPIRED MATERIALS,STRUCTURES AND APPLICATIONS11-10-2 Bioinspired Materials, Structures andApplicationsThird Floor, David L. Lawrence Convention Center, Room 333

3:45pm–5:30pm

Session Chair: Zhenhai Xia, University of North Texas, Denton,TX, United States


3:45pm – Fiber Reorientation Behavior of FunctionalGraded Bouligand ArchitecturesTechnical Presentation. IMECE2018-88222Di Wang, Purdue University, West Lafayette, IN, United States, Alireza Zaheri, Northwestern University, Evanston, IL,United States, Benjamin Russell, University of Cambridge,Cambridge, United Kingdom, Horacio Espinosa,Northwestern University, Evanston, IL, United States, Pablo Zavattieri, Purdue University, West Lafayette, IN, United States


166

4:06pm – Bioinspired Microstructures and Guided CrackPropagation in Photopatterned Dual-Cure PolymerNetworksTechnical Presentation. IMECE2018-89354Lewis Cox, NIST, Boulder, CO, United States, AdrienneBlevins, Yifu Ding, University of Colorado Boulder, Boulder,CO, United States, Jasper Drisko, Jason Killgore, NIST,Boulder, CO, United States

4:27pm – Tunable Thermal Transport and ReversibleThermal Conductivity Switching in Topologically NetworkedBio-inspired MaterialsTechnical Presentation. IMECE2018-89795John A. Tomko, University of Virginia, Charlottesville, VA,United States, Abdon Pena-Francesch, Huihun Jung,Pennsylvania State University, State College, PA, UnitedStates, Madhusudan Tyagi, National Institute of Standards,Gaithersburg, MD, United States, Benjamin Allen,Pennsylvania State University, State College, PA, UnitedStates, Melik Demirel, Pennsylvania State University,University Park, PA, United States, Patrick E. Hopkins,University of Virginia, Charlottesville, VA, United States

4:48pm – Seedcoat-Inspired Arcitectured Materials WithSutural TessellationTechnical Presentation. IMECE2018-90038Yaning Li, Chao Gao, Benjamin Hasseldine, University ofNew Hampshire, Durham, NH, United States, Ling Li,University of Virginia, Blacksburg, VA, United States, James Weaver, Harvard University, Cambridge, MA, UnitedStates

5:09pm – Experimental Analysis and Characterization ofBioplastic Materials Reinforced With Nanofibers andNanoparticlesTechnical Presentation. IMECE2018-88857Mohammad Asaduzzaman Chowdhury, Bengir AhmedShuvho, Rajib Nandee, Uttam Kumar Debnath, Mohi UddinAhmed, Dhaka University of Engineering & Technology,Gazipur, Bangladesh, Suman Das, University ofSaskatchewan, Saskatchewan, SK, Canada, Md. Ruhul Amin,Dhaka University of Engineering & Technology, Gazipur,Bangladesh

11-14 MULTIFUNCTIONAL COMPOSITEMATERIALS AND STRUCTURES11-14-1 Multifunctional Composite Materials andStructures 1Third Floor, David L. Lawrence Convention Center, Room 334

3:45pm–5:30pm


Session Co-Chair: Sha Yin, Beihang University, Beijing, China

3:45pm – Stochastic Modeling of a High Speed CompositeFlywheel for Energy StorageTechnical Paper Publication. IMECE2018-86484Matthew Riley, Rose-Hulman Institute of Technology, TerreHaute, IN, United States, Justin Pettingill, University of Idaho,Moscow, ID, United States

4:06pm – Determination of Key Influencing Factors onThermal Conductivity Enhancement of Graphene Nano-Platelets Reinforced EpoxyTechnical Paper Publication. IMECE2018-86847Maximilian Rieger, Balakrishnan Nagarajan, University ofAlberta, Edmonton, AB, Canada, Mario Vollmer, TechnicalUniversity of Munich, Garching, Germany, Pierre Mertiny,University of Alberta, Edmonton, AB, Canada

4:27pm – A Finite Element Study of the Impact ofInterphase on the Damping Properties of PolymerCompositesTechnical Presentation. IMECE2018-88066Satyam Shukla, Shank S. Kulkarni, Alireza Tabarraei,University of North Carolina at Charlotte, Charlotte, NC, UnitedStates

4:48pm – Prediction of Gas Permeation in PolymericMaterials Used in Oil and Gas IndustryTechnical Paper Publication. IMECE2018-87211Nooshin Nassr, University of Oklahoma, Hackensack, NJ,United States, Zahed Siddique, University of Oklahoma,Norman, OK, United States

5:09pm – Numerical Analysis About Hierarchical LatticeMaterials With Different ConstructionsTechnical Presentation. IMECE2018-89155Haoyu Chen, Sha Yin, Xiang Gao, Beihang University, Beijing,China


167


11-9 MATERIALS PROCESSING ANDCHARACTERIZATION11-9-5 Materials Processing and Characterization VThird Floor, David L. Lawrence Convention Center, Room 334

10:00am–11:45am

Session Chair: Muhammad Rahman, Wichita State University,Wichita, KS, United States

Session Co-Chair: Philippe Geubelle, University of Illinois atUrbana-Champaign, Urbana, IL, United States

10:00am – Advanced Recycled Materials for EconomicProduction of Fire Resistant FabricsTechnical Paper Publication. IMECE2018-88640Tamseel Ahmed, Zaara Ali, Muhammad Rahman, EylemAsmatulu, Wichita State University, Wichita, KS, United States

10:21am – Processing and Characterization of Filler SiliconCarbide, Aluminum Oxide, and Titanium Oxide Particles onGlass Fiber Hybrid CompositeTechnical Presentation. IMECE2018-88852Mohammad Asaduzzaman Chowdhury, Uttam KumarDebnath, Benjir Ahmed Shuvho, Rajib Nandee, DhakaUniversity of Engineering and Technology, Gazipur, Gazipur,Gazipur, Bangladesh, Suman Das, University ofSaskatchewan, Saskatchewan, SK, Canada, Atiqur Rahman,Bangladesh Road Transport Authority, Dhaka, Bangladesh

10:42am – Faster, Energy-Efficient Manufacturing of Fiber-Reinforced Composites Using Frontal PolymerizationTechnical Presentation. IMECE2018-88994Philippe Geubelle, Elyas Goli, Sagar Vyas, University ofIllinois at Urbana-Champaign, Urbana, IL, United States

11:03am – Trade-off between Boron Doping and Stiffness,Strength and Damage Tolerance of GrapheneTechnical Presentation. IMECE2018-89089Zhaohe Dai, University of Texas at Austin, Austin, TX, UnitedStates

11:24am – In Situ Characterization of Residual Stress andPrimary Creep in NiW Thin Films Using Wafer CurvatureTechnical Presentation. IMECE2018-89821Prince Singh, Ryan Pocratsky, Maarten P. De Boer, CarnegieMellon University, Pittsburgh, PA, United States


10:00am–11:45am

Session Chair: Akio Yonezu, Chuo University, Tokyo, Japan

Session Co-Chair: Jun Xu, Beihang University, Beijing, China

10:00am – Effect of Porous Structure on TensileDeformation of Porous Polymer Membranes: FEMComputations of Periodic and Random Pore StructuresTechnical Presentation. IMECE2018-86656Kanako Emori, Yoshiki Nishiyama, Takumi Nagakura, Akio Yonezu, Chuo University, Tokyo, Japan

10:21am – Deformation Modeling of Porous PolymerMaterials With 3D Random Pore StructureTechnical Presentation. IMECE2018-86492Hiroshi Kishida, Shugo Fushimi, Takumi Nagakura, Kanako Emori, Akio Yonezu, Chuo University, Tokyo, Japan

10:42am – Anisotropic Deformation Behavior of PolymericMicrofiltration Membranes: Experiment and FEM ModelingTechnical Presentation. IMECE2018-86655Takumi Nagakura, Kanako Emori, Hiroshi Kishida, Akio Yonezu, Chuo University, Tokyo, Japan

11:03am – Bonding Strength Evaluation of Al Alloy andEpoxy Resin by Using Laser Induced Ultrasonic WaveTechnical Presentation. IMECE2018-86658Yusaku Saito, Takeshi Yamada, Akio Yonezu, Chuo University, Tokyo, Japan

11:24am – Nano Surface Adhesion and DeformationBehaviors of Polymer Blend Membranes for WaterPurification by Using Atomic Force MicroscopyTechnical Presentation. IMECE2018-87302Kazunori Miyamoto, Daiki Ikeshima, Kenji Furuya, Hiroshi Yamamura, Akio Yonezu, Chuo University, Tokyo,Japan

11-18 PHASE TRANSFORMATIONS INMATERIALS PROCESSING11-18-1 Phase Transformations in MaterialsProcessing I: Additive ManufacturingThird Floor, David L. Lawrence Convention Center, Room 336

10:00am–11:45am

Session Chair: Mohsen Asle Zaeem, Colorado School ofMines, Golden, CO, United States

10:00am – Additive Manufacturing, 3D Printing, Porosityand Synchrotron ExperimentsInvited Presentation. IMECE2018-86665Anthony Rollett, Carnegie Mellon University, Pittsburgh, PA,United States

TRACK 11 MATERIALS: GENETICS TO STRUCTURES – WEDNESDAY, NOVEMBER 14

168

10:21am – An Overview of Additive Manufacturing ofFunctional Magnetic Shape Memory Alloys andMetamagnetic Materials With Magnetocaloric PropertiesInvited Presentation. IMECE2018-88140Markus Chmielus, Jakub Toman, Amir Mostafaei, EricaStevens, Katerina A. Kimes, University of Pittsburgh,Pittsburgh, PA, United States

10:42am – Optimizing Additively-Manufactured Inconel 625for Reliable Mechanical Properties and CorrosionResistanceInvited Presentation. IMECE2018-88848Mark Stoudt, Richard Ricker, Eric Lass, National Institute ofStandards and Technology, Gaithersburg, MD, MD, UnitedStates

11:03am – Nano-Scale Spatiotemporal ResolutionTransmission Electron Microscopy of Multicomponent AlloyMicrostructure Evolution During Rapid Thermal TransientsInvited Presentation. IMECE2018-86718Jorg Wiezorek, University of Pittsburgh, Pittsburgh, PA, UnitedStates, Joseph McKeown, Lawrence Livermore NationalLaboratory, Livermore, CA, United States, VishwanadhBathula, University of Pittsburgh, Pittsburgh, PA, United States

11:24am – Binder Jet 3D Printing of Metamagnetic Ni-Mn-Based Alloys for Magnetocaloric ApplicationsTechnical Presentation. IMECE2018-88204Erica Stevens, Katerina A. Kimes, Aaron Acierno, RafaelRodriguez, Amir Mostafaei, Markus Chmielus, University ofPittsburgh, Pittsburgh, PA, United States

11-9 MATERIALS PROCESSING ANDCHARACTERIZATION11-9-6 Materials Processing and Characterization VIThird Floor, David L. Lawrence Convention Center, Room 334

1:45pm–3:30pm

Session Chair: Raghu Prakash, Indian Institute of TechnologyMadras, Chennai, India

Session Co-Chair: Nicholas J. Morris, UES, Inc./AFRL,Dayton, OH, United States

1:45pm – PH level of Pore Solution in Alkali Activated Fly-Ash Geopolymer Concrete and Its Effect on ASR ofAggregates With Wide Silicate ContentsTechnical Presentation. IMECE2018-89053Shree Paudel, Mijia Yang, North Dakota State University,Fargo, ND, United States

2:06pm – Influence of Steel Fiber on Mechanical Propertiesof Elevated Temperature Cured Fly-Ash Based GeopolymerMortarTechnical Presentation. IMECE2018-89054Shree Paudel, Mijia Yang, North Dakota State University,Fargo, ND, United States

2:27pm – Correlating Chemistry and Mechanics to DesignLiquid Metal Nanoparticles for Self-Healing ElectronicsTechnical Presentation. IMECE2018-89549Nicholas J. Morris, Zachary J. Farrell, UES, Inc./AFRL,Dayton, OH, United States, Christopher E. Tabor, Air ForceResearch Laboratory, WPAFB, OH, United States

2:48pm – Scalable Manufacturing Routes to Develop BoronNitride Nanotubes Based Metal Matrix CompositesTechnical Presentation. IMECE2018-89722Pranjal Nautiyal, Benjamin Boesl, Arvind Agarwal, FloridaInternational University, Miami, FL, United States

3:09pm – Assessing Interlayer Adhesion Degradation inPhotovoltaic Backsheets Using the Single Cantilever BeamTestTechnical Presentation. IMECE2018-89668Scott Julien, Northeastern University, Boston, MA, UnitedStates, Xiaohong Gu, Jae Hyun Kim, National Institute ofStandards and Technology, Gaithersburg, MD, United States,Kai Tak Wan, Northeastern University, Boston, MA, UnitedStates


1:45pm–3:30pm

Session Chair: Sha Yin, Beihang University, Beijing, China

Session Co-Chair: Akio Yonezu, Chuo University, Tokyo,Japan

1:45pm – Thermal Resistance of Polystyrene-SeededConcrete for Better Insulative ValueTechnical Paper Publication. IMECE2018-88661Chris Kobus, Michael Huyssen, Ryan Piper, J. David Schall,Oakland University, Rochester, MI, United States, LailaGuessous, Oakland University, Bloomfield, MI, United States,Xia Wang, Oakland University, Rochester, MI, United States

2:06pm – Ordered Carbon Nanotube-Polymer CompositesFrom Lyotropic Liquid Crystal TemplatingTechnical Presentation. IMECE2018-89476Shanju Zhang, Cal Poly, San Luis Obispo, CA, United States

2:27pm – Mechanical and Morphological Properties ofNickel-Plated Luffa SpongeTechnical Presentation. IMECE2018-89946Huitian Wang, Haoyu Chen, Zihan Hu, Yaobo Wu, Sha Yin,Beihang University, Beijing, China

2:48pm – Investigating the Mechanical Behaviour of Al6063Stir Cast With Coconut HuskTechnical Presentation. IMECE2018-88953Patrick Adebisi Olusegun Adegbuyi, Lagos State UniversityLagos, Lagos, Nigeria


169

3:09pm – Micromechanical Modeling of NonlinearResponses of Active Woven CompositesTechnical Presentation. IMECE2018-88354Wen-chen Lin, Chien-hong Lin, National Cheng KungUniversity, Tainan, Taiwan

11-18 PHASE TRANSFORMATIONS INMATERIALS PROCESSING11-18-2 Phase Transformations in MaterialsProcessing II: Microstructures and PropertiesThird Floor, David L. Lawrence Convention Center, Room 336

1:45pm–3:30pm


Session Co-Chair: Siddhartha Pathak, University of Nevada,Reno, Reno, NV, United States

1:45pm – New Insights Into Metallic Alloy MicrostructuralEvolution by In Situ CharacterizationInvited Presentation. IMECE2018-88880Amy Clarke, Colorado School of Mines, Golden, CO, UnitedStates

2:06pm – Structure and Properties of bcc Mg SynthesizedUsing Interface Strain EngineeringInvited Presentation. IMECE2018-88968Siddhartha Pathak, Manish Jain, University of Nevada, Reno,Reno, NV, United States, Marko Knezevic, University of NewHampshire, Durham, NH, United States, Nenad Velisavljevic,Los Alamos National Laboratory, Los Alamos, NM, UnitedStates, Nathan Mara, University of Minnesota, Minneapolis,MN, United States, Irene Beyerlein, University of California,Santa Barbara, Santa Barbara, CA, United States

2:27pm – Understanding Nucleation Phenomena and PhaseFormation in Rapid Solidification of Al and Al-Cu AlloysTechnical Presentation. IMECE2018-88934Avik Mahata, Missouri S&T, Rolla, MO, United States, Michael Baskes, University of California, San Diego, La Jolla,CA, United States, Mohsen Asle Zaeem, Colorado School ofMines, Golden, CO, United States

2:48pm – Effect of Non-Equilibrium Cooling on PhaseTransformations and Morphology of Second Phases in Al-Rich Al-Cu AlloysTechnical Presentation. IMECE2018-87574Vishwanadh Bathula, Subarna Khanal, Jorg Wiezorek,University of Pittsburgh, Pittsburgh, PA, United States

3:09pm – A Comparative Assessment of the Structural,Elastic and Electronic Properties of Nb3Pt and NbPt3Phases Through First-Principles StudyTechnical Paper Publication. IMECE2018-86911Romeo Sephyrin Fono-Tamo, Tien-Chien Jen, University ofJohannesburg, Johannesburg, South Africa, Oliver Bhila,University of South Africa, Johannesburg, Gauteng, SouthAfrica

11-6 NANOENGINEERED, HIERARCHICAL,MULTI-SCALE MATERIALS ANDSTRUCTURES11-6-1 Nanoengineered, Hierarchical, Multi-ScaleMaterials and StructuresThird Floor, David L. Lawrence Convention Center, Room 336

3:45pm–5:30pm

Session Chair: Ram Mohan, North Carolina A&T University,Greensboro, NC, United States

3:45pm – Integrating an Analytical UncertaintyQuantification Approach to Multi-Scale Modeling ofNanocompositesTechnical Paper Publication. IMECE2018-86227Pinar Acar, Virginia Tech, Blacksburg, VA, United States

4:06pm – Simulation of Liquid Crystal PolymerDirectionality During Cast Film ExtrusionTechnical Paper Publication. IMECE2018-86855Anthony Sullivan, Anil Saigal, Michael Zimmerman, Tufts University, Medford, MA, United States

4:27pm – Hydrostatic Compression Constitutive MaterialModeling of Two-Phase Cement Paste Composite MaterialChemistry StructuresTechnical Presentation. IMECE2018-89136Ingrid Padilla Espinosa, Ram Mohan, North Carolina A&TUniversity, Greensboro, NC, United States, Wayne Hodo, U.S. Army - ERDC, Vicksburg, MS, United States, John RivasMurillo, North Carolina A&T State University, Greensboro, NC,United States

4:48pm – Multiscale Finite Element Modeling of Ultra-HighPerformance ConcreteTechnical Presentation. IMECE2018-89167K.E. Bryan, Y. Hammi, Mississippi State University, Starkville,MS, United States, M.Q. Chandler, USACE-ERDC, Vicksburg,MS, United States, R.D. Moser, U.S. Army Engineer Researchand Development Center, Vicksburg, MS, United States, M.N. Burcham, Mississippi State University, Huntsville, AL,United States, D. Scott, U.S. Army Research and DevelopmentCenter, Vicksburg, MS, United States, T.W. Stone, Mark Horstemeyer, Mississippi State University, Starkville,MS, United States

5:09pm – 3D Graphene Foam for Engineering AdvancedComposites and MetamaterialsTechnical Presentation. IMECE2018-89688Pranjal Nautiyal, Benjamin Boesl, Arvind Agarwal, FloridaInternational University, Miami, FL, United States


170

11-13 MULTIPHYSICS AND MULTISCALEMODELING OF LITHIUM-ION BATTERIES11-13-1 Multiphysics and Multiscale Modeling ofLithium-Ion BatteriesThird Floor, David L. Lawrence Convention Center, Room 334

3:45pm–5:30pm


Session Co-Chair: Binghe Liu, Beijing University ofAeronautics and Astronautics, Beijing, China

3:45pm – A Detailed Mechanical Model of Lithium-IonPouch BatteriesTechnical Presentation. IMECE2018-89465Juner Zhu, Massachusetts Institute of Technology, Cambridge,MA, United States, Wei Li, Tsinghua University, Beijing, Beijing,China, Tomasz Wierzbicki, Massachusetts Institute ofTechnology, Cambridge, MA, United States

4:06pm – Multiphysics Modeling of 18650 Battery UnderMechanical LoadingTechnical Presentation. IMECE2018-89129Chunhao Yuan, Jun Xu, Lubing Wang, Beihang University,Beijing, China

4:27pm – Assessing Battery Safety Using a CombinedSimulation Approach From Cell to Vehicle LevelTechnical Presentation. IMECE2018-89190Bernhard Brunnsteiner, AVL, Graz, Austria

4:48pm – State-of-Charge Dependence of MechanicalResponse of Lithium-Ion Batteries: A Result of InternalStressTechnical Presentation. IMECE2018-89392Wei Li, Xia Yong, Tsinghua University, Beijing, Beijing, China,Juner Zhu, Massachusetts Institute of Technology, Cambridge,MA, United States, Hailing Luo, Tsinghua University, Beijing,China

5:09pm – A Multiscale and Multiphysics Model for Lithium-Ion Full Cells With Silicon-Containing AnodesTechnical Presentation. IMECE2018-89125Binghe Liu, Beijing University of Aeronautics and Astronautics,Beijing, China, Jun Xu, Beihang University, Beijing, China,Hanqing Jiang, Arizona State University, Tempe, AZ, UnitedStates

11-20 RECENT DEVELOPMENTS INTRIBOLOGY11-20-1 Recent Developments in TribologyThird Floor, David L. Lawrence Convention Center, Room 335

3:45pm–5:30pm

Session Chair: Patricia Iglesias, Rochester Institute ofTechnology, Rochester, NY, United States

Session Co-Chair: Hong Guo, Rochester Institute ofTechnology, Rochester, NY, United States

3:45pm – The Effects of Single-Walled Carbon Nanotubesand Ionic Liquids in Reduction of Friction and WearTechnical Paper Publication. IMECE2018-86703Hong Guo, John Ackerman, Steven Keil, Ivan Puchades,Brian Landi, Patricia Iglesias, Rochester Institute ofTechnology, Rochester, NY, United States

4:06pm – Effect of Carbon Nanotube-Phosphinate IonicLiquid Thin Boundary Layer on the Tribological Behavior ofAluminum Alloy in Steel-on-Aluminum ContactTechnical Paper Publication. IMECE2018-86875Miguel Gutierrez, Michael Gydesen, Caitlin Marcellus, Ivan Puchades, Brian Landi, Patricia Iglesias, RochesterInstitute of Technology, Rochester, NY, United States

4:27pm – Estimation of Energy Conservation in InternalCombustion Engine Vehicles Using Ionic Liquid as anAdditiveTechnical Paper Publication. IMECE2018-87002Sameer A. Magar, Hong Guo, Patricia Iglesias, RochesterInstitute of Technology, Rochester, NY, United States

4:48pm – Surface Characterization of Trim Dies andTrimmed Edges in Sheet Metal ShearingTechnical Presentation. IMECE2018-89542Xin Wu, Ameer Al-Shawk, Wayne State University, Detroit, MI,United States

5:09pm – Ionic Liquids as Additives of Cutting Fluids toReduce Machine Tool Friction and WearTechnical Paper Publication. IMECE2018-86810Patricia Iglesias, Christopher Ferri, Sydney Lizarazo,Michael Troise, Rochester Institute of Technology, Rochester,NY, United States


171

NOTES

172

12-1-1: Mechanics of Soft Materials: Structure12-1-2: Mechanics of Soft Materials: Gels/Active

Materials 112-1-3: Mechanics of Soft Materials: Gels/Active

Materials 212-1-4: Mechanics of Soft Materials: Constitutive

Modeling12-1-5: Mechanics of Soft Materials: Bioinspiration and

Biomimetics12-1-6: Mechanics of Soft Materials:

Electro/magneto/Chemo-Mechanics12-1-7: Mechanics of Soft Materials: Characterization12-1-8: Mechanics of Soft Materials: Fracture,

Dissipation, and Self-Healing12-2-1: 3D Printing of Novel Materials12-2-2: Mechanics of 3D Printed Materials12-3-1: Mechanical Characterization in Extreme

Environments I12-3-2: Mechanical Characterization in Extreme

Environments II12-3-3: Mechanical Characterization in Extreme

Environments III12-4-1: Mechanics of Adhesion and Friction12-4-2: Mechanics of Adhesion and Friction12-4-3: Mechanics of Adhesion and Friction12-5-1: Quantitative Visualization Related to Fracture &

Crack Growth Processes12-6-1: In-Situ Techniques in Experimental Mechanics12-7-1: Multiscale Models and Experimental Techniques

for Composite Materials and Structures12-7-2: Multiscale Models and ExperimentalTechniques

for Composite Materials and Structures12-7-3: Multiscale Models and Experimental Techniques

for Composite Materials and Structures12-8-1: Multi-Scale Computations in Fluids, Structures,

and Materials 112-8-2: Multi-Scale Computations in Fluids, Structures,

and Materials 212-8-3: Multi-Scale Computations in Fluids, Structures,

and Materials 312-10-1: Modeling and Experiments in Nanomechanics

and Nanomaterials 112-10-2; Modeling and Experiments in Nanomechanics

and Nanomaterials 212-10-3: Modeling and Experiments in Nanomechanics

and Nanomaterials 312-10-4: Modeling and Experiments in Nanomechanics

and Nanomaterials 412-12-1: Mechanics of Thin-Film and Multi-Layer

Structures12-12-2: Mechanics ofThin-Film and Multi-Layer

Structures12-12-3: Mechanics ofThin-Film and Multi-Layer

Structures12-12-4: Mechanics of Thin-Film and Multi-Layer

Structures12-13-1: Recent Advances and Applications in Meshfree

and Particle Methods12-13-2: Recent Advances and Applications in Meshfree

and Particle Methods12-14-1: Plastic Anisotropy Modeling12-14-2: Multi-Scale Modelling of Plastic Anisotropy12-14-3: Numerical Modeling with Applications to

Forming12-14-4: Experimental andTheoretical Models for

Anisotropic Plasticity and Fracture12-15-1: Inaugural Symposium on the Constitutive

Modeling of the Mechanical Behavior andPerformance of Electronic, Photonic, MEMS, andNEMS Materials, Assemblies, Packages, Modules,and Systems

12-16-1: Multiscale Modeling and Experimentation ofGeomaterials

12-16-2: Multiscale Modeling and Experimentation ofGeomaterials

12-17-1: Failure and Fracture of Additively ManufacturedMaterials and Structures – 1

12-17-2: Failure and Fracture of Additively ManufacturedMaterials and Structures – 2

12-18-1: Computational Modeling of Extreme Events12-18-2: Computational Modeling of Extreme Events12-19-1: Computational Fluid-Structure Interaction12-19-2: Computational Fluid-Structure Interaction12-19-3: Computational Fluid-Structure Interaction12-19-4: Computational Fluid-Structure Interaction12-20-1: Multiscale Mechanics of Ductile Failure12-20-2: Multiscale Mechanics of Ductile Failure12-21-1: Fatigue Modeling in Engineering Materials12-21-2: Fatigue Modeling in Engineering Materials12-21-3: Material Model and Fracture Theory Development12-21-4: Meso-Scale Modeling and Material Fracture

Characterization12-21-5: Uncertainty Modeling in Fracture and Fatigue12-22-1: Deformation and Failure of Multifunctional

Materials12-22-2: Deformation and Failure of Multifunctional

Materials12-25-1: Mechanics and Design of Cellular Materials12-25-2: Mechanics and Design of Cellular Materials12-26-1: Mechanics of Soft Materials and Soft Robots12-26-2: Mechanics of Soft Materials and Soft Robots12-26-3: Mechanics of Soft Materials and Soft Robots12-26-4: Mechanics of Soft Materials and Soft Robots12-26-5: Mechanics of Soft Materials and Soft Robots12-27-1: Multifunctional and Micro/Nano-Structured

Materials: Modeling and Characterization (I)12-27-2: Multifunctional and Micro/Nano-Structured

Materials: Modeling and Characterization (II)12-27-3: Multifunctional and Micro/Nano-Structured

Materials: Modeling and Characterization (III)12-27-4: Multifunctional and Micro/Nano-Structured

Materials: Modeling and Characterization (IV)12-28-1: Instabilities in Solids and Structures: Mechanics

of Slender Solids12-28-2: Instabilities in Solids and Structures: Numerical/

Analytical Stability12-28-3: Instabilties in Solids and Structures: Active and

Soft Materials12-28-4: Instabilities in Solids and Structures: Stability of

Composites, Foams/Open-Cell Materials12-28-5: Instabilities in Solids and Structures: Phase

Transformations/Transitions and Multi-Stability12-29-1: Peridynamic Modelling and Analysis12-29-2: Peridynamics for Composites, Fracture, and

Corrosion Damage12-30-1: Symposium on Multiphyics Simulations and

Experiments for Solids12-30-2: Symposium on Multiphyics Simulations and

Experiments for Solids12-31-1: Design of Mechanical Metamaterials12-31-2: Functionality of Mechanical Metamaterials12-31-3: Mechanics of Mechanical Metamaterials12-31-4: Reconfigurable Mechanical Metamaterials12-32-1: High-Performance Nanostructural Materials and

Nanocomposites12-33-1: Congress-Wide Symposium on NDE &SHM –

Nondestructive Characterization of Solids,Structures and Fluids

12-35-1: Congress-Wide Symposium on NDE &SHM –Active and Passive Health Monitoring ofStructures

12-36-1: Keynote Lectures on Computational Mechanics –1

12-38-1: Young Medalist Symposium12-38-2: Young Medalist Symposium12-39-1: Drucker Medal Symposium12-39-2: Drucker Medal Symposium12-39-3: Drucker Medal Symposium12-40-1: Mechanics of Solids, Structures and Fluids

Plenary I12-40-2: Mechanics of Solids, Structures and Fluids

Plenary II12-41-1: Dynamic Failure of Materials and Structures12-41-2: Dynamic Failure of Materials and Structures

Track OrganizersYuri Bazilevs, University of California, San Diego,

United States Pradeep Guduru, Brown University, United States

Topic OrganizersShawn Chester, New Jersey Institute of Technology,

United States Shengqiang Cai, UC San Diego, United States Qiming Wang, University of Southern California,

United StatesHowon Lee, Rutgers University, United StatesQiming Wang, University of Southern California,

United States Kai Yu, University of Colorado – Denver, United

StatesRyan Berke, Utah State University, United StatesNatasha Vermaak, Lehigh University, United States Owen Kingstedt, University of Utah, United StatesJianliang Xiao, University of Colorado Boulder,

United States Chenglin Wu, Missouri University of Science and

Technology, United States Brian Bush, National Institute of Standards and

Technology, United StatesLeslie Lamberson, Drexel University, United States Ali Ghahremaninezhad, University of Miami, United

States Charles Wojnar, Missouri S&T, United StatesDianyun Zhang, University of Connecticut, United

StatesCaglar Oskay, Vanderbilt University, United States Evan Pineda, NASA Glenn Research Center, United

StatesYozo Mikata, Bechtel, United States Jeffrey Kysar, Columbia University, United StatesShuodao Wang, Oklahoma State University, United

StatesHuanyu (Larry) Cheng, Pennsylvania State University,

United States Jizhou Song, Zhejiang University, ChinaSheng-Wei Chi, University of Illinois at Chicago,

United States Jiun-Shyan Chen, University of California, San

Diego, United States Michael Hillman, Pennsylvania State University,

United States C.T. Wu, LSTC, United StatesOana Cazacu, University of Florida, United States H. Eliot Fang, Sandia National Laboratories, United

States Martin Ostoja-Starzewski, University of Illinois

Urbana, United StatesEphraim Suhir, Portland State University, United

States Abhijit Dasgupta, CALCE, University of Maryland,

United States M.Q. Chandler, USACE-ERDC, United States Jesse Sherburn, US Army Engineer Research and

Development Center, United States Paul Allison, University of Alabama, United StatesAshfaq Adnan, University of Texas Arlington, United

StatesJason Roth, U.S. Army - ERDC, United States Joe Bishop, Sandia National Labs, United States Artem Korobenko, University of Calgary, Canada Ming-Chen Hsu, Iowa State University, United States Kenji Takizawa, Waseda University, Japan Tayfun Tezduyar, Rice University, United StatesJustin Wilkerson, Texas A&M University, United

States Ankit Srivastava, Texas A&M University, United

States Shailendra Joshi, University of Houston, United

States Huijuan Zhao, Clemson University, United States Gang Li, Clemson University, United States Qingda Yang, University of Miami, United States Mohsen Asle Zaeem, Colorado School of Mines,

United StatesTheocharis Baxevanis, University of Houston, United

States Dimitris Lagoudas, Texas A&M University, United

States

Ibrahim Karaman, Texas A & M University, UnitedStates

Charles Wojnar, Missouri S&T, United States Russell Mailen, Auburn University, United StatesMuhammad Ali, Ohio University, United States Huanyu (Larry) Cheng, Pennsylvania State University,

United StatesShaoxing Qu, Zhejiang University, Zhejiang, China Tiefeng Li, Zhejiang University, ChinaXin-Lin Gao, Southern Methodist University, United

States Vinu Unnikrishnan, University of Alabama, United

States Haifeng Zhao, Chinese Academy of Sciences, ChinaRyan Elliott, University of Minnesota, United States Edmundo Corona, Sandia National Laboratories,

United States Dai Okumura, Osaka University, Japan Kostas Danas, LMS, CNRS, Ecole Polytechnique,

FranceFlorin Bobaru, University of Nebraska-Lincoln,

United States Ibrahim Guven, Virginia Commonwealth University,

United States Erdogan Madenci, University of Arizona, United

States Pablo Seleson, Oak Ridge National Laboratory,

United States Stewart Silling, Sandia National Lab, United StatesQian Qian, University of Texas at Dallas, United

StatesHanqing Jiang, Arizona State University, United

StatesHarold Park, Boston University, United States Gang Li, Clemson University, United States Xianqiao Wang, University of Georgia, United StatesJongmin Shim, University at Buffalo, United States Lifeng Wang, Stony Brook University, United StatesJie Yin, Temple University, United States Yaning Li, University of New Hampshire, United

StatesSung Kang, Johns Hopkins University, United States Eduard Karpov, University of Illinois at Chicago,

United States Jaehyung Ju, Shanghai Jiao Tong University, ChinaYuris Dzenis, University of Nebraska, United States Dimitry Papkov, University of Nebraska-Lincoln,

United States Mohammad Naraghi, Texas A & M University, United

StatesSourav Banerjee, University of South Carolina,

United States Andrei Zagrai, New Mexico Institute of Mining &

Technology, United StatesYanfeng Shen, Shanghai Jiao Tong University, ChinaSridhar Santhanam, Villanova University, United

States Tribikram Kundu, University of Arizona, United States Scott Bland, NextGen Aeronautics, United StatesQian Qian, University of Texas at Dallas, United

States Ashfaq Adnan, University of Texas Arlington, United

States Caglar Oskay, Vanderbilt University, United StatesL. Roy Xu, University of New Mexico, United States Jun Xu, Beihang University, China

Session OrganizersShengqiang Cai, UC San Diego, United StatesShawn Chester, New Jersey Institute of Technology,

United StatesQiming Wang, University of Southern California,

United States Sung Kang, Johns Hopkins University, United StatesRobert L. Lowe, University of Dayton, United StatesAurelie Azoug, Oklahoma State University, United

States Kai Yu, University of Colorado – Denver, United

StatesOwen Kingstedt, University of Utah, United States Natasha Vermaak, Lehigh University, United States Ryan Berke, Utah State University, United StatesJianliang Xiao, University of Colorado Boulder,

United States

Glaucio Paulino, University of Illinois, United StatesKarel Matouš, University of Notre Dame, United

StatesHuijuan Zhao, Clemson University, United StatesAhmad Najafi, Drexel University, United StatesJeffrey Kysar, Columbia University, United States Scott Price, G E Research Center, United States Changhong Ke, State University of NY, United StatesYingchao Yang, University of Maine, United StatesGeorge Voyiadjis, Louisiana State University, United

States Tarek Ragab, Arkansas State University, United

StatesYashashree Kulkarni, University of Houston, United

StatesShuodao Wang, Oklahoma State University, United

States Sheng-Wei Chi, University of Illinois at Chicago,

United StatesPablo Seleson, Oak Ridge National Laboratory,

United States C.T. Wu, LSTC, United States Michael Hillman, Pennsylvania State University,

United States William Scherzinger, Sandia National Laboratories,

United States Brian Lester, Sandia National Laboratories, United

States Nitin Chandola, University of Florida, United States William Lawrimore, US Army Engineer Research and

Development Center, United StatesAshfaq Adnan, University of Texas Arlington, United

StatesJustin Wilkerson, Texas A&M University, United

States Ke Li, Schlumberger, TX, United States Huijuan Zhao, Clemson University, United States Rui Zhang, University of Texas at Dallas, United

States Qingda Yang, University of Miami, United States Alireza Amirkhizi, University of Massachusetts,

Lowell, United States Kazem Alidoost, University of Illinois at Urbana-

Champaign, United States Xiaoyao Peng, Carnegie Mellon University, United

States Sevan Goenezen, Texas A&M University, United

States Bahador Bahmani, University of Tennessee,

Knoxville, United StatesHaifeng Zhao, Chinese Academy of Sciences, ChinaVinu Unnikrishnan, University of Alabama, United

StatesStavros Gaitanaros, Johns Hopkins University,

United StatesPedro Reis, EPFL (Switzerland), Switzerland Xin Ning, Pennsylvania State University, United

States Nicolas Triantafyllidis, Ecole Polytechnique, FranceStelios Kyriakides, University of Texas, United States Dai Okumura, Nagoya University, Japan Victor Lefevre, Northwestern University, United

States George Kardomateas, Georgia Institute of

Technology, United States Katia Bertoldi, Harvard University, United States Hiro Tanaka, Osaka University, Japan Rui Zhang, University of Texas at Dallas, United

States Jongmin Shim, University at Buffalo, United States Jie Yin, Temple University, United StatesJaehyung Ju, Shanghai Jiao Tong University, China Eduard Karpov, University of Illinois at Chicago,

United States Jie Yin, Temple University, United States Yaning Li, University of New Hampshire, United

States Soumik Banerjee, Washington State University,

United StatesSridhar Santhanam, Villanova University, United

States Yihui Zhang, Tsing Un ChinaDennis Kochmann, ETHWei Cai, Stanfor

TRACK 12 MECHANICS OF SOLIDS,STRUCTURES AND FLUIDSMONDAY, NOVEMBER 12

12-1 MECHANICS OF SOFT MATERIALS12-1-1 Mechanics of Soft Materials: StructureThird Floor, David L. Lawrence Convention Center, Room 333

9:45am–11:30am

Session Chair: Shengqiang Cai, University of California SanDiego, La Jolla, CA, United States

9:45am – Origomu: The Geometry and Mechanics ofFolding Polymer Films and ShellsInvited Presentation. IMECE2018-89449Ryan Hayward, University of Massachusetts Amherst,Amherst, MA, United States

10:27am – Origami/Kirigami-Guided Morphing ofComposite SheetsTechnical Presentation. IMECE2018-89357Jianxun Cui, Carnegie Mellon University, Pittsburgh, PA,United States, Felipe Poblete, Yong Zhu, North Carolina StateUniversity, Raleigh, NC, United States

10:48am – Nonlinear Mechanics of Soft Substrates WithSurface TopologyTechnical Presentation. IMECE2018-88272Ranajay Ghosh, Hossein Ebrahimi, Hessein Ali, University ofCentral Florida, Orlando, FL, United States

11:09am – Deformation of Radially Symmetric ShapeMemory Polymer DiscsTechnical Presentation. IMECE2018-89289Russell Mailen, Auburn University, Auburn, AL, United States,Catherine Wagner, Jan Genzer, Michael D. Dickey, North Carolina State University, Raleigh, NC, United States,Mohammed Zikry, North Carolina State University, Raleigh,NC, United States

12-6 IN-SITU TECHNIQUES INEXPERIMENTAL MECHANICS12-6-1 In-Situ Techniques in Experimental MechanicsFourth Floor, David L. Lawrence Convention Center, Room 402

9:45am–11:30am

Session Chair: Ryan Berke, Utah State University, Logan, UT,United States

9:45am – Experimental Characterization of Polymer Filmsand Fabrics at Intermediate Strain RatesTechnical Presentation. IMECE2018-89739Alireza Amirkhizi, Fateme Aghighi, David Roux, University ofMassachusetts, Lowell, Lowell, MA, United States

10:06am – Real-Time Visualization of GaN/AlGaN HighElectron Mobility Transistor Failure at Off-StateTechnical Presentation. IMECE2018-89116Zahabul Islam, Pennsylvania State University, State College,PA, United States, Md. Haque, Pennylvania State University,University Park, PA, United States, Nicholas Glavin, Air ForceResearch Laboratory, Ohio, OH, United States

10:27am – Characterization of the MicromechanicalEvolution of Ti-7Al Under the Cyclic Loading Using HighEnergy X-Ray Diffraction MicroscopyTechnical Presentation. IMECE2018-89152Rachel E. Lim, Carnegie Mellon University, Pittsburgh, PA,United States, Darren C. Pagan, Cornell High EnergySynchrotron Source, Ithaca, NY, United States, Vahid Tari,Yufeng Shen, Robert M. Suter, Anthony D. Rollett, CarnegieMellon University, Pittsburgh, PA, United States

10:48am – In Situ Observation on Temperature Dependenceof Martensitic Transformation and Plastic Deformation inSuperelastic NiTi AlloyTechnical Presentation. IMECE2018-88828Yao Xiao, Pan Zeng, Liping Lei, Tsinghua University, Beijing,China

12-10 MODELING AND EXPERIMENTS INNANOMECHANICS AND NANOMATERIALS12-10-1 Modeling and Experiments inNanomechanics and Nanomaterials 1Third Floor, David L. Lawrence Convention Center, Room 335

9:45am–11:30am

Session Chair: Yozo Mikata, Bechtel, Niskayuna, NY, UnitedStates

Session Co-Chairs: Jeffrey Kysar, Columbia University, NewYork, NY, United States, Scott Price, GE Research Center,Niskayuna, NY, United States, Changhong Ke, State Universityof New York at Binghamton, Binghamton, NY, United States

9:45am – Post-Buckled Deformation of GrapheneTechnical Presentation. IMECE2018-88585Yozo Mikata, Bechtel, Niskayuna, NY, United States

10:06am – Material Design for Nanosized FePdFerromagnetic Shape Memory Alloy Nano-Materials byThermodynamics and Dislocation Punching ModelsTechnical Presentation. IMECE2018-89454Minoru Taya, University of Washington, Seattle, WA, UnitedStates

10:27am – Probing the Structural and MechanicalProperties of Boron Nitride NanosheetsTechnical Presentation. IMECE2018-87093Wenyang Qu, Feilin Gou, State University of New York atBinghamton, Binghamton, NY, United States, Xiaoming Chen,Xi’an Jiaotong University, Xi’an, Shaanxi, China, ChanghongKe, State University of New York at Binghamton, Binghamton,NY, United States

TRACK 12 MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS – MONDAY, NOVEMBER 12

173

10:48am – Probing Mechanics of Monolayer Two-Dimensional NanomaterialsTechnical Presentation. IMECE2018-86296Yingchao Yang, University of Maine, Orono, ME, United States

11:09am – Mechanics of Nanofiber Packing in Vesicles:Effects of Fiber Length, Radius, and ElasticityTechnical Presentation. IMECE2018-88975Xin Yi, Peking University, Beijing, China, Guijin Zou, HuajianGao, Brown University, Providence, RI, United States

12-15 INAUGURAL SYMPOSIUM ON THECONSTITUTIVE MODELING OF THEMECHANICAL BEHAVIOR ANDPERFORMANCE OF ELECTRONIC,PHOTONIC, MEMS, AND NEMSMATERIALS, ASSEMBLIES, PACKAGES,MODULES, AND SYSTEMS12-15-1 Inaugural Symposium on the ConstitutiveModeling of the Mechanical Behavior andPerformance of Electronic, Photonic, MEMS, andNEMS Materials, Assemblies, Packages, Modules,and SystemsThird Floor, David L. Lawrence Convention Center, Room 331

9:45am–11:30am

Session Chair: Martin Ostoja-Starzewski, University of Illinoisat Urbana-Champaign, Urbana, IL, United States

9:45am – Equivalent Material Properties for Thermo-Mechanical Modeling of Microelectronic PackagesTechnical Presentation. IMECE2018-86238Yu-Lin Shen, University of New Mexico, Albuquerque, NM,United States

10:00am – Does a Fractal Microstructure Require aFractional Viscoelastic Model?Technical Presentation. IMECE2018-88369Martin Ostoja-Starzewski, Jun Zhang, University of Illinois atUrbana-Champaign, Urbana, IL, United States

10:15am – Anisotropic Hill Constants for Steady-StateCreep Behavior of Single Crystal SnAgCu Joints Based onMulti-scale ModelingTechnical Presentation. IMECE2018-88791Qian Jiang, Abhijit Dasgupta, University of Maryland, CollegePark, MD, United States

10:30am – Constitutive Model for Pressure-SensitiveAdhesive (PSA) JointsTechnical Presentation. IMECE2018-88796Hao Huang, Abhijit Dasgupta, University of Maryland, CollegePark, MD, United States

10:45am – Alleviating Thermomechanical Wrinkling inFunctionally Graded Sandwich Panels Using NanoscaleReinforcement of the Core MaterialTechnical Presentation. IMECE2018-88817Victor Birman, Missouri University of Science and Technology,St. Louis, MO, United States

11:00am – An Overview of Thermomechanical Fatigue in CuInterconnects: Probabilistic and Statistical Considerationsfor Robust Design and QualificationTechnical Presentation. IMECE2018-88843John Evans, NASA, Washington, DC, United States, Bhanu Sood, NASA, Greenbelt, MD, United States, Michael Osterman, University of Maryland, College Park, MD,United States

12-18 COMPUTATIONAL MODELING OFEXTREME EVENTS12-18-1 Computational Modeling of Extreme EventsThird Floor, David L. Lawrence Convention Center, Room 336

9:45am–11:30am

Session Chair: Jason Roth, U.S. Army - ERDC, Vicksburg, MS,United States

9:45am – Data-Driven, Co-Designed Simulations andExperiments of Shock SynthesisInvited Presentation. IMECE2018-88032Karel Matouš, University of Notre Dame, Notre Dame, IN,United States

10:27am – Modeling and Simulations on Coupled PlasticFlows and Plastic Strain-Induced Phase Transformations inDiamond Anvil CellsTechnical Presentation. IMECE2018-89055Biao Feng, Los Alamos National Laboratory, Los Alamos, NM,United States, Valery Levitas, Iowa State University, Ames, IA,United States

10:48am – Dynamic Fragmentation of Brittle MaterialsUsing Eulerian MethodsTechnical Presentation. IMECE2018-89448Vinamra Agrawal, Auburn University, Auburn, AL, UnitedStates

11:09am – A Comparison of Mesh-Free and Mesh-BasedLagrangian Approximations of Manufactured Shear-Dominated Deformation FieldsTechnical Presentation. IMECE2018-89219Joseph Bishop, Sandia National Laboratories, Albuquerque,NM, United States


174

12-19 COMPUTATIONAL FLUID-STRUCTURE INTERACTION12-19-1 Computational Fluid-Structure InteractionThird Floor, David L. Lawrence Convention Center, Room 338

9:45am–11:30am

Session Chair: Artem Korobenko, University of Calgary,Calgary, AB, Canada

9:45am – Fluid-Structure Interaction Between PulsatileBlood Flow and a Curved Stented Coronary Artery on aBeating Heart: A Four Stent Computational StudyTechnical Presentation. IMECE2018-88827Suncica Canic, University of California, Berkeley, Berkeley,Houston, TX, United States, Martina Bukac, University ofNotre Dame, South Bend, IN, United States, Josip Tambaca,University of Zagreb, Zagreb, Croatia (Hrvatska), Yifan Wang,University of California, Berkeley, Berkeley, CA, United States

10:06am – Fluid-Structure Interaction Modeling ofTranscatheter Heart Valve ReplacementsTechnical Presentation. IMECE2018-90003Ming-Chen Hsu, Michael C.H. Wu, Iowa State University,Ames, IA, United States

10:27am – Fluid-Structure Interaction in Abdominal AorticAneurysmTechnical Presentation. IMECE2018-89030Siyeong Ju, Linxia Gu, Shengmao Lin, University ofNebraska–Lincoln, Lincoln, NE, United States, Xinwei Han,Yonghua Bi, Zhengzhou University, Zhengzhou, China

10:48am – An Open-source Framework for FSI of Bio-Inspired Flows at High Reynolds NumberTechnical Presentation. IMECE2018-89308Andrew Guarendi, Christin Murphy, Naval Undersea WarfareCenter, Newport, RI, United States, Jennifer Franck,University of Wisconsin-Madison, Madison, WI, United States

11:09am – Optimum Pitching-Heaving of a Foil forExtracting Power From an Incident FreestreamTechnical Presentation. IMECE2018-89680Shreyas Mandre, Kenny Breuer, Brown University,Providence, RI, United States, Michael Miller, BrownUniversity, Pawtucket, RI, United States

12-22 DEFORMATION AND FAILURE OFMULTIFUNCTIONAL MATERIALS12-22-1 Deformation and Failure of MultifunctionalMaterialsFourth Floor, David L. Lawrence Convention Center, Room 401

9:45am–11:30am

Session Chair: Charles Wojnar, Missouri S&T, Rolla, MO,United States

9:45am – Study of the Effect of Large Deformation Througha Finite Deformation Based Constitutive Model for MetallicGlassesTechnical Paper Publication. IMECE2018-86063Shank S. Kulkarni, University of North Carolina at Charlotte,Charlotte, NC, United States, Tanmay K. Bhandakkar, IndianInstitute of Technology Bombay, Mumbai, India

10:06am – A Finite Strain Constitutive Model forPolycrystalline Shape Memory Alloys Accounting forPseudoelasticity, One Way Shape Memory Effect,Orientation, Reorientation, Ferroelasticity, and Latent HeatTechnical Presentation. IMECE2018-88820Theocharis Baxevanis, Mengqian Zhang, University ofHouston, Houston, TX, United States

10:27am – Asymptotic Analysis of Sponge Spicules’Sensitivity to Geometric Imperfection Regarding toBuckling InstabilityTechnical Presentation. IMECE2018-89173Wenqiang Fang, Michael Monn, Haneesh Kesari,Brown University, Providence, RI, United States

10:48am – On Buckling Analysis for Biomedical ShapeMemory Alloy Stent Graft Under Axial, Lateral andCombined LoadingsTechnical Presentation. IMECE2018-89457Lei Xu, Hector Larin, Dimitris Lagoudas, Texas A&MUniversity, College Station, TX, United States

12-28 INSTABILITIES IN SOLIDS ANDSTRUCTURES12-28-1 Instabilities in Solids and Structures:Mechanics of Slender solidsThird Floor, David L. Lawrence Convention Center, Room 334

9:45am–11:30am

Session Chair: Stavros Gaitanaros, Johns Hopkins University,Baltimore, MD, United States

Session Co-Chair: Pedro Reis, École Polytechnique Fédéralede Lausanne, Lausanne, VD, Switzerland

9:45am – Untangling the Mechanics of Elastic KnotsTechnical Presentation. IMECE2018-89092Pedro Reis, Paul Johanns, Paul Grandgeorge, ÉcolePolytechnique Fédérale de Lausanne, Lausanne, VD,Switzerland


175

10:06am – Bistable Inflatable Origami-Inspired StructuresTechnical Presentation. IMECE2018-89330Katia Bertoldi, David Melancon, Chuck Hoberman, HarvardUniversity, Cambridge, MA, United States, Jason Ku, ErikDemaine, Massachusetts Institute of Technology, Cambridge,MA, United States

10:27am – Exploiting Structural Buckling: A NovelManufacturing Approach to Three-Dimensional FunctionalMesostructuresTechnical Presentation. IMECE2018-89859Xin Ning, Pennsylvania State University, Urbana, IL, UnitedStates, John Rogers, Northwestern University, Evanston, IL,United States

10:48am – Tunable Bistablity of Clamped Elastic BeamsTechnical Presentation. IMECE2018-89925Yin Liu, Zhe Xu, Lin Dong, Xiaomin Han, John X.J. Zhang, Zi Chen, Dartmouth College, Hanover, NH, United States

11:09am – Mechanically-Guided Assembly of Complex 3DMesostructures by Compressive Buckling: Kirigami-Inspired 3D Membranes and Strain Engineering ofElastomer SubstratesTechnical Presentation. IMECE2018-89161Haiwen Luan, Northwestern University, Evanston, IL, UnitedStates, Yihui Zhang, Tsinghua University, Beijing, China,Yonggang Huang, Northwestern University, Evanston, IL,United States

12-1 MECHANICS OF SOFT MATERIALS12-1-2 Mechanics of Soft Materials: Gels/ActiveMaterials 1Third Floor, David L. Lawrence Convention Center, Room 333

1:45pm–3:30pm

Session Chair: Shawn Chester, New Jersey Institute ofTechnology, North Caldwell, NJ, United States

1:45pm – Micro-Mechanical Modeling of the StressSoftening in Double-Network HydrogelsTechnical Paper Publication. IMECE2018-88252Vahid Morovati, Roozbeh Dargazany, Michigan StateUniversity, East Lansing, MI, United States

2:00pm – Poroelastic Effects on Fracture of GelsTechnical Presentation. IMECE2018-88961Yalin Yu, Chad Landis, Rui Huang, University of Texas atAustin, Austin, TX, United States

2:15pm – Anti-Fatigue-Fracture Hydrogels by DesigningCrystalline DomainsTechnical Presentation. IMECE2018-89088Shaoting Lin, Xuanhe Zhao, Massachusetts Institute ofTechnology, Cambridge, MA, United States

2:30pm – Modeling Fiber-reinforced Polymeric GelsTechnical Presentation. IMECE2018-89417Nikola Bosnjak, New Jersey Institute of Technology, Newark,NJ, United States, Howon Lee, Rutgers, The State Universityof New Jersey, Piscataway, NJ, United States, Shawn Chester,New Jersey Institute of Technology, North Caldwell, NJ, UnitedStates

2:45pm – A WENO Finite-Difference Scheme for a NewClass of Hamilton-Jacobi Equations in Nonlinear SolidMechanicsTechnical Presentation. IMECE2018-89236Victor Lefevre, Northwestern University, Evanston, IL, UnitedStates, Oscar Lopez-Pamies, University of Illinois at Urbana-Champaign, Urbana, IL, United States

3:00pm – Liquid Metal Elastomer Composites for LowTemperature ApplicationsTechnical Presentation. IMECE2018-89665Mohammad H. Malakooti, Navid Kazem, Carmel Majidi,Carnegie Mellon University, Pittsburgh, PA, United States


1:45pm–3:30pm


Session Co-Chairs: Jeffrey Kysar, Columbia University, NewYork, NY, United States, Yingchao Yang, University of Maine,Orono, ME, United States

1:45pm – Nano-Emitter Mass-Loss Mechanisms andPredicted Damage PatternsTechnical Presentation. IMECE2018-88076Scott Price, G E Research Center, Niskayuna, NY, UnitedStates, Yozo Mikata, Bechtel, Niskayuna, NY, United States

2:06pm – Direct Nanomechanical Measurements of CarbonNanotube-Metal InterfacesTechnical Presentation. IMECE2018-87078Chenglin Yi, Christopher M. Dmuchowski, Feilin Gou, StateUniversity of New York at Binghamton, Binghamton, NY, UnitedStates, Xiaoming Chen, Xi’an Jiaotong University, Xi’an,Shaanxi, China, Cheol Park, NASA Langley Research Center,Hampton, VA, United States, Changhong Ke, State Universityof New York at Binghamton, Binghamton, NY, United States

2:27pm – Structural and Mechanical Properties of BoronNitride Nanotubes in High Temperature EnvironmentsTechnical Presentation. IMECE2018-87074Xiaoming Chen, Xi’an Jiaotong University, Xi’an, Shaanxi,China, Christopher M. Dmuchowski, State University of NewYork at Binghamton, Binghamton, NY, United States, CheolPark, Catharine C. Fay, NASA Langley ResearHampton, VA, United States, Changhong Ke, State University


176

2:48pm – Mechanical and Electrical Properties of GrapheneNano Mesh HeterojunctionsTechnical Presentation. IMECE2018-87021Ji Zhang, Weixiang Zhang, University at Buffalo, StateUniversity of New York, Buffalo, NY, United States, Tarek Ragab, Arkansas State University, State University,AR, United States, Cemal Basaran, University at Buffalo, State University of New York, Buffalo, NY, United States

3:09pm – Electron-Induced Wind Forces in MetallicGraphene NanoribbonsTechnical Presentation. IMECE2018-87022Ji Zhang, University at Buffalo, State University of New York,Buffalo, NY, United States, Tarek Ragab, Arkansas StateUniversity, State University, AR, United States, CemalBasaran, University at Buffalo, State University of New York,Buffalo, NY, United States

12-18 COMPUTATIONAL MODELING OFEXTREME EVENTS12-18-2 Computational Modeling of Extreme EventsThird Floor, David L. Lawrence Convention Center, Room 336

1:45pm–3:30pm

Session Chair: Jason Roth, U.S. Army - ERDC, Vicksburg, MS,United States

1:45pm – Constitutive Models and Their Application toPredict Geomaterial Failure Resulting From EmbeddedDetonationsInvited Presentation. IMECE2018-86714Andy Frank, Jessica Fulk, Jason Roth, Mike Hammons,U.S. Army - ERDC, Vicksburg, MS, United States

2:27pm – Dislocation Mobility and Non-Schmid Effects inHMX Under High PressuresTechnical Presentation. IMECE2018-89294Anirban Pal, Mohammad Khan, Catalin Picu, RensselaerPolytechnic Institute, Troy, NY, United States

2:48pm – Modeling Plastic Slip, Twinning, and PhaseTransformation in Single Crystal Titanium Under DynamicLoading ConditionsTechnical Presentation. IMECE2018-89056Biao Feng, Curt Bronkhorst, Los Alamos National Laboratory,Los Alamos, NM, United States

3:09pm – Simulation of Delayed Hydride Cracking Behaviorin Zircaloy Cladding Tubes Considering Irradiation DamageEffectsTechnical Presentation. IMECE2018-89541Shurong Ding, Zhongjia Xia, Jingyu Zhang, Fudan University,Shanghai, China


1:45pm–3:30pm


1:45pm – A Dual-Solver Hybrid Approach for Fluid-Structure Interaction of Rotating SystemsTechnical Presentation. IMECE2018-89309Marilyn Smith, Georgia Institute of Technology, Atlanta, GA,United States, Glen Whitehouse, Continuum Dynamics Inc.,Ewing, NJ, United States

2:06pm – Computational Aeroelasticity for Systems WithFlexible WingsTechnical Presentation. IMECE2018-88847Balakumar Balachandran, University of Maryland, CollegePark, Rockville, MD, United States

2:27pm – Constructal Approach in Design of High Aspect-Ratio Aircraft: The Concept of Flow of Stresses andAeroelastic StabilityTechnical Presentation. IMECE2018-87824Pezhman Mardanpour, Florida International University,Weston, FL, United States, Ehsan Izadpanahi, SiavashRastkar, Florida International University, Miami, FL, UnitedStates, Sylvie Lorente, University of Toulouse, INSA, Toulouse,France, Adrian Bejan, Duke University, Durham, NC, UnitedStates

2:48pm – Fluid-Structure Interaction Framework forCompressible FlowsTechnical Presentation. IMECE2018-90045Artem Korobenko, University of Calgary, Calgary, AB, Canada,Yuri Bazilevs, Brown University, Providence, RI, United States,Ming-Chen Hsu, Iowa State University, Ames, IA, UnitedStates, David Kamensky, Georgios Moutsanidis, BrownUniversity, Providence, RI, United States

12-28 INSTABILITIES IN SOLIDS ANDSTRUCTURES12-28-2 Instabilities in Solids and Structures:Numerical/Analytical StabilityThird Floor, David L. Lawrence Convention Center, Room 334

1:45pm–3:30pm

Session Chair: Xin Ning, Pennsylvania State University,Urbana, IL, United States

Session Co-Chair: Nicolas Triantafyllidis, Ecole Polytechnique,Palaiseau, France

1:45pm – Hierarchical Honeycomb Material Design andOptimization: Beyond Linearized BehaviorTechnical Presentation. IMECE2018-89386Christelle Combescure, Université Paris-Est MarChamps-sur-Marne, France, Ryan Elliott, University of


177

2:06pm – Numerical Energy Relaxation and AssociatedMicrostructure Formation in Problems With Non-ConvexEnergetic PotentialsTechnical Presentation. IMECE2018-89532Siddhant Kumar, Vidyasagar Ananthan, California Institute ofTechnology, Pasadena, CA, United States, Dennis Kochmann,ETH Zurich, Zurich, Switzerland

2:27pm – Fracture and Healing in Elastomers: A Phase-Transition Theory and Numerical ImplementationTechnical Presentation. IMECE2018-89171Aditya Kumar, University of Illinois at Urbana-Champaign,Urbana, IL, United States, Krishnaswamy Ravi-Chandar,University of Texas at Austin, Austin, TX, United States, Gilles A. Francfort, Courant Institute of MathematicalSciences, New York, NY, United States, Oscar Lopez-Pamies,University of Illinois at Urbana-Champaign, Urbana, IL, UnitedStates

2:48pm – Post-Buckling Analysis of Wide BeamsTechnical Presentation. IMECE2018-89367Yuzhen Chen, Lihua Jin, University of California, Los Angeles,Los Angeles, CA, United States

3:09pm – Stability Analysis of Step Dynamics in CrystalGrowthTechnical Presentation. IMECE2018-89128Laurent Guin, Michel Jabbour, Nicolas Triantafyllidis, EcolePolytechnique, Palaiseau, France

12-33 CONGRESS-WIDE SYMPOSIUM ONNDE & SHM—NONDESTRUCTIVECHARACTERIZATION OF SOLIDS,STRUCTURES AND FLUIDS12-33-1 Congress-Wide Symposium on NDE &SHM—Nondestructive Characterization of Solids,Structures and FluidsThird Floor, David L. Lawrence Convention Center, Room 331

1:45pm–3:30pm


1:45pm – Integrity Evaluation of Composite CylindricalStructuresTechnical Paper Publication. IMECE2018-87158Jikai Du, University at Buffalo, State University of New York,Buffalo, NY, United States

2:06pm – Locating and Quantifying Through CircularDamage in CNT/GFRP Composite Panel Using Gaussian FitTechnical Paper Publication. IMECE2018-87681Kerim Ikikardaslar, CCNY/CUNY, New York, NY, UnitedStates, Feridun Delale, City College of New York, New York,NY, United States, Mahmoud Ardebili, Borough of ManhattanCommunity College/CUNY, New York, NY, United States, SalihYildiz, Kenneth Gollins, City College of New York, New York,NY, United States

2:27pm – Analysis Alkali-Silica Reaction in Concrete WithElectromagnetic MethodsTechnical Presentation. IMECE2018-88034Alexander Heifetz, Argonne National Laboratory, Lemont, IL,United States, Anthony Bentivegna, CTLGroup, Skokie, IL,United States, Sasan Bakhtiari, Argonne National Laboratory,Lemont, IL, United States

2:48pm – Entropy as an Indicator of Stress-Relaxation inCompositesTechnical Presentation. IMECE2018-89100Subir Patra, Sourav Banerjee, University of South Carolina,Columbia, SC, United States

3:09pm – Prediction of Leak Rates Through PorousMaterials Using Analytical and Numerical ApproachesTechnical Paper Publication. IMECE2018-88683Ali Salah Omar Aweimer, Abdel-Hakim Bouzid, ÉcoleTechnologie Superieure, Montreal, QC, Canada, Zijian Zhao,Skyeetech Ltd., Shenyang, China

12-36 KEYNOTE LECTURES ONCOMPUTATIONAL MECHANICS12-36-1 Keynote Lectures on ComputationalMechanics – 1Fourth Floor, David L. Lawrence Convention Center, Room 402

1:45pm–3:30pm

Session Chair: Qian Qian, University of Texas at Dallas,Richardson, TX, United States


1:45pm – Coupled Shock-Plasticity-Damage Modeling ofExplosive Welding by RKPMInvited Presentation. IMECE2018-88929Jiun-Shyan Chen, Jonghyuk Baek, University of California,San Diego, La Jolla, CA, United States

2:27pm – Computational Design of Phononic TopologicalInsulatorsInvited Presentation. IMECE2018-89015Harold Park, Boston University, Brookline, MA, United States,Nanthakumar Subbiah, Xiaoying Zhuang, Leibniz UniversityHannover, Hannover, Germany, Timon Rabczuk, Bauhaus-University Weimar, Weimar, Germany

3:09pm – Emerging Trends in Computational Mechanics—Data-Driven Computation and MechanicsTechnical Presentation. IMECE2018-88908Ashfaq Adnan, University of Texas at Arlington, Arlington, TX,United States


178

12-38 YOUNG MEDALIST SYMPOSIUM12-38-1 Young Medalist SymposiumFourth Floor, David L. Lawrence Convention Center, Room 401

1:45pm–3:30pm

Session Chair: Yihui Zhang, Tsinghua University, Beijing, China

1:45pm – Propagating Transition Fronts in (Meta-)Materials:From Simple Chains to 2D PatternsTechnical Presentation. IMECE2018-89052Dennis Kochmann, Romik Khajehtourian, ETH Zurich,Zurich, Switzerland, Michael Frazier, University of California,San Diego, La Jolla, CA, United States, Katia Bertoldi,Harvard University, Cambridge, MA, United States

2:06pm – Evolution of Stress and Structure DuringElectrochemical Cycling of Sulfur CathodesTechnical Presentation. IMECE2018-89256Matt Pharr, Texas A&M University, College Station, TX, UnitedStates

2:27pm – Energy Localization in Nonlinear DynamicalSystems: Design, Measurement, and ControlTechnical Presentation. IMECE2018-88949Edmon Perkins, Auburn University, Auburn, AL, United States

2:48pm – Coarse-Graining Out of Equilibrium: FromParticles to Dissipative PDEsTechnical Presentation. IMECE2018-88948Celia Reina, Xiaoguai Li, University of Pennsylvania,Philadelphia, PA, United States, Nicolas Dirr, PeterEmbacher, University of Cardiff, Cardiff, United Kingdom,Johannes Zimmer, University of Bath, Bath, United Kingdom

12-1 MECHANICS OF SOFT MATERIALS12-1-3 Mechanics of Soft Materials: Gels/ActiveMaterials 2Third Floor, David L. Lawrence Convention Center, Room 333

3:45pm–5:30pm

Session Chair: Shawn Chester, New Jersey Institute ofTechnology, North Caldwell, NJ, United States

3:45pm – Phase Separation in Elastomeric GelsTechnical Presentation. IMECE2018-88670Wei Hong, Iowa State University, Ames, IA, United States

4:06pm – New Insights on the Viscoelastic Behavior ofPolymeric GelsTechnical Presentation. IMECE2018-89413Nikola Bosnjak, Justin Newkirk, New Jersey Institute ofTechnology, Newark, NJ, United States, Shawn Chester, New Jersey Institute of Technology, North Caldwell, NJ, UnitedStates

4:27pm – Swelling, Drying and Viscoelasticity of HydrogelsTechnical Presentation. IMECE2018-89286Si Chen, Krishnaswamy Ravi-Chandar, University of Texas atAustin, Austin, TX, United States

4:48pm – Comparison Between Temperature-DependentMechanical Properties of Thermo-Responsive Poly (VinylAlcohol) Poly (N-Isopropyl Acrylamide) Hydrogel and Non-Thermo-Responsive Alginate HydrogelTechnical Presentation. IMECE2018-87790Yuqi Jin, Shuai Ju, Hyeonu Heo, University of North Texas,Denton, TX, United States, Ezekiel Walker, Echonovus Inc.,Denton, TX, United States, Haifeng Zhang, Tae-Youl Choi,Arup Neogi, University of North Texas, Denton, TX, UnitedStates

5:09pm – A New Scaling Law for Describing How WaterContent Affects Elastic Modulus and Fracture Energy ofHydrogelsTechnical Presentation. IMECE2018-89158Zishun Liu, Ziqian Li, Xi’an Jiaotong University, Xi’an, China


3:45pm–5:30pm


Session Co-Chairs: Jeffrey Kysar, Columbia University, NewYork, NY, United States, George Voyiadjis, Louisiana StateUniversity, Baton Rouge, LA, United States, Tarek Ragab,Arkansas State University, State University, AR, United States

3:45pm – Modeling of Indentation Size Effect in AmorphousPolymersTechnical Presentation. IMECE2018-87076George Voyiadjis, Leila Malekmotiei, Aref Samadi-Dooki,Louisiana State University, Baton Rouge, LA, United States

4:06pm – Frictional Properties of Graphene Nano Flakes onDiamond SubstrateTechnical Presentation. IMECE2018-89268Ji Zhang, Ehsan Osloub, Fatima Siddiqui, Weixiang Zhang,University at Buffalo, State University of New York, Buffalo, NY,United States, Tarek Ragab, Arkansas State University, StateUniversity, AR, United States, Cemal Basaran, University atBuffalo, State University of New York, Buffalo, NY, UnitedStates

4:27pm – Tuning the Contact Angle and Evaporation Rateof Water Droplets on Laser Processed Graphene FlakesTechnical Presentation. IMECE2018-89949Srilok Srinivasan, Iowa State University, Ames, IA, UnitedStates, Ganesh Balasubramanian, Lehigh University,Bethlehem, PA, United States, Suprem Das, Kansas StateUniversity, Manhattan, KS, United States


179

4:48pm – Mechanistic Insights Into Crystalline Interfacesvia Thermal FluctuationsTechnical Presentation. IMECE2018-89997Dengke Chen, Georgia Institute of Technology, Atlanta, GA,United States, Yashashree Kulkarni, University of Houston,Houston, TX, United States

5:09pm – OpenKIM: Reliable Interatomic Models forMultiscale SimulationsTechnical Presentation. IMECE2018-89384Ryan Elliott, University of Minnesota, Saint Paul, MN, UnitedStates, Ellad Tadmor, Daniel Karls, University of Minnesota,Minneapolis, MN, United States, James Sethna, CornellUniversity, Ithaca, NY, United States

12-13 RECENT ADVANCES ANDAPPLICATIONS IN MESHFREE ANDPARTICLE METHODS12-13-1 Recent Advances and Applications inMeshfree and Particle MethodsThird Floor, David L. Lawrence Convention Center, Room 336

3:45pm–5:30pm

Session Chair: Sheng-Wei Chi, University of Illinois atChicago, Chicago, IL, United States

Session Co-Chair: Pablo Seleson, Oak Ridge NationalLaboratory, Oak Ridge, TN, United States

3:45pm – Methods and Challenges of Material FailureModeling and Multiscale Computation in IndustrialApplicationsTechnical Presentation. IMECE2018-88772C.T. Wu, Wei Hu, Bo Ren, Youcai Wu, Yong Guo, XiaofeiPan, Zeliang Liu, Livermore Software Technology Corporation,Livermore, CA, United States

4:20pm – Generalized Reproducing Kernel PeridynamicsTechnical Presentation. IMECE2018-89871Michael Hillman, Pennsylvania State University, UniversityPark, PA, United States

4:35pm – Convergence Studies in Meshfree PeridynamicSimulationsTechnical Presentation. IMECE2018-89982Pablo Seleson, Oak Ridge National Laboratory, Oak Ridge,TN, United States, David Littlewood, Sandia NationalLaboratories, Albuquerque, NM, United States

4:50pm – On the Stability of the Generalized, Ordinary,Finite Deformation Constitutive Correspondence Model ofPeridynamicsTechnical Presentation. IMECE2018-89917Masoud Behzadinasab, John Foster, University of Texas atAustin, Austin, TX, United States

5:05pm – Consistent Strong Enforcement of EssentialBoundary Conditions in Meshfree MethodsTechnical Presentation. IMECE2018-89937Kuan-Chung Lin, Pennsylvania State University, State College,PA, United States, Michael Hillman, Pennsylvania StateUniversity, University Park, PA, United States


3:45pm–5:30pm


3:45pm – A Corrected Point-Particle Method for Simulationof Particle-Laden FlowsTechnical Presentation. IMECE2018-88559Mahdi Esmaily, Cornell University, Ithaca, NY, United States,Jeremy A. Horwitz, Stanford University, Stanford, CA, UnitedStates

4:06pm – An Adaptive Robin Transmission Condition forFluid-Structure Coupled SimulationsTechnical Presentation. IMECE2018-89280Shunxiang Cao, Virginia Tech, Blacksburg, VA, United States,Alex Main, Duke University, Durham, NC, United States, Kevin G. Wang, Virginia Tech, Blacksburg, VA, United States

4:27pm – Partitioned Coupling Method Between Three-Dimensional Heat Conduction Analysis andOne-Dimensional Analysis of Cooling Pipe ModelTechnical Presentation. IMECE2018-88979Naoto Mitsume, Tomonori Yamada, Shinobu Yoshimura,University of Tokyo, Tokyo, Japan

4:48pm – Computational Fluid Structure InteractionSimulation and Validation of Crossflow Through a TubeBundleTechnical Presentation. IMECE2018-89759Landon Brockmeyer, Texas A&M University, College Station,TX, United States, Elia Merzari, Argonne National Laboratory,Lemont, IL, United States, Jerome Solberg, LLNL, Livermore,CA, United States, Yassin Hassan, Texas A&M University,College Station, TX, United States

5:09pm – Fluid-Structure Interactions Using an ImmersedBoundary Method: A Turbulence GeneratorTechnical Presentation. IMECE2018-89305Siamak Mirfendereski, Jae Sung Park, University ofNebraska–Lincoln, Lincoln, NE, United States


180

12-22 DEFORMATION AND FAILURE OFMULTIFUNCTIONAL MATERIALS12-22-2 Deformation and Failure of MultifunctionalMaterialsFourth Floor, David L. Lawrence Convention Center, Room 405

3:45pm–5:30pm

Session Chair: Russell Mailen, Auburn University, Auburn, AL,United States

3:45pm – Mechanics of Fracture in Lithium-Ion StorageMaterialsTechnical Presentation. IMECE2018-89837Xueju Wang, University of Missouri, Columbia, Columbia, MO,United States, Min Zhou, Shuman Xia, Georgia Institute ofTechnology, Atlanta, GA, United States

4:06pm – Design and Characteristic Analysis ofAmalgamated Transparent Materials for Armor StructuresUsing Defeating Ballistic ExperimentationTechnical Paper Publication. IMECE2018-86122Emad Attalla, Lawrence Technological University, Southfield,MI, United States, Steven Grate, AM General LLC, AuburnHills, MI, United States, Badih Jawad, Lawrence TechnologicalUniversity, Dearborn Heights, MI, United States, VernonFernandez, Sabah Abro, Liping Liu, Lawrence TechnologicalUniversity, Southfield, MI, United States

4:27pm – Experimental Determination of Crack GrowthRates During Actuation of NiTi and NiTiHf Shape MemoryAlloysTechnical Presentation. IMECE2018-89010Ceylan Hayrettin, Benjamin Young, Texas A&M University,College Station, TX, United States, Theocharis Baxevanis,University of Houston, Houston, TX, United States, IbrahimKaraman, Dimitris Lagoudas, Texas A&M University, CollegeStation, TX, United States

4:48pm – Failure Mechanism of CementitiousNanocomposites Reinforced by Multi-Walled and Single-Walled Carbon Nanotubes Under Splitting Tensile TestTechnical Paper Publication. IMECE2018-88512Robabeh Jazaei, Moses Karakouzian, Brendan O’Toole,Jaeyun Moon, Samad Gharehdaghi, University of Nevada,Las Vegas, Las Vegas, NV, United States

12-28 INSTABILITIES IN SOLIDS ANDSTRUCTURES12-28-3 Instabilties in Solids and Structures: Activeand Soft MaterialsThird Floor, David L. Lawrence Convention Center, Room 334

3:45pm–5:30pm

Session Chair: Stelios Kyriakides, University of Texas atAustin, Austin, TX, United States

Session Co-Chair: Dai Okumura, Nagoya University, Nagoya,Japan

3:45pm – Swelling-Induced Strain Softening of SwollenElastomersTechnical Presentation. IMECE2018-89159Dai Okumura, Nagoya University, Nagoya, Japan

4:06pm – Nonlinear Electroelastic Deformations of SoftLayered Composites Containing Space Charges, WithApplication to ElectretsTechnical Presentation. IMECE2018-89237Victor Lefevre, Northwestern University, Evanston, IL, UnitedStates, Oscar Lopez-Pamies, University of Illinois at Urbana-Champaign, Urbana, IL, United States

4:27pm – Bifurcation Analysis of Twisted Liquid CrystalBilayersTechnical Presentation. IMECE2018-89046Dipayan Mukherjee, Ecole Polytechnique, CNRS, Palaiseau,Ile-de-France, France, Kostas Danas, LMS, CNRS, EcolePolytechnique, Palaiseau, Ile-de-France, France, NicolasTriantafyllidis, Ecole Polytechnique, Palaiseau, France

4:48pm – Rayleigh-Taylor Instability in a Confined ElasticSoft CylinderTechnical Presentation. IMECE2018-89162Yue Zheng, Shengqiang Cai, University of California SanDiego, La Jolla, CA, United States

5:09pm – Freestanding 3D Mesostructures and FunctionalDevices Based on Mechanically Induced Assembly ofShape Memory PolymersTechnical Presentation. IMECE2018-89948Xueju Wang, University of Missouri, Columbia, Columbia, MO,United States, Xiaogang Guo, Tsinghua University, Beijing,China, Yonggang Huang, Northwestern University, Evanston,IL, United States, Yihui Zhang, Tsinghua University, Beijing,China, John Rogers, Northwestern University, Evanston, IL,United States


181

12-35 CONGRESS-WIDE SYMPOSIUM ONNDE & SHM—ACTIVE AND PASSIVEHEALTH MONITORING OF STRUCTURES12-35-1 Congress-Wide Symposium on NDE &SHM—Active and Passive Health Monitoring ofStructuresThird Floor, David L. Lawrence Convention Center, Room 331

3:45pm–5:30pm

Session Chair: Sridhar Santhanam, Villanova University,Collegeville, PA, United States

3:45pm – Acoustic Emission Low-TemperaturePerformance Grade Evaluation of Asphalt RoadwaysMaterialsTechnical Paper Publication. IMECE2018-86067Lihui Sun, University of Illinois at Urbana-Champaign, Urbana,IL, United States, Behzad Behnia, Clarkson University, NewYork, NY, United States, William Buttlar, University of Missouri,Columbia, Columbia, MO, United States, Henrique Reis,University of Illinois at Urbana-Champaign, Urbana, IL, UnitedStates

4:06pm – Amplitude and Sweeping Direction DependentNonlinear Ultrasonic Resonance Spectroscopy for FatigueCrack DetectionTechnical Paper Publication. IMECE2018-86221Yanfeng Shen, Nipon Roy, Junzhen Wang, Zixuan Liu,Danyu Rao, Wu Xu, Shanghai Jiao Tong University, Shanghai,China

4:27pm – Improved Nonlinear Ultrasonic Guided WaveDamage Detection Using a Bandgap Meta-SurfaceTechnical Paper Publication. IMECE2018-86222Yiran Tian, Yanfeng Shen, Shanghai Jiao Tong University,Shanghai, China

4:48pm – Coupling Behaviors in Remotely Bonded FiberBragg Grating Sensors for Lamb Wave DetectionTechnical Presentation. IMECE2018-87972Junghyun Wee, Drew Hackney, Kara Peters, North CarolinaState University, Raleigh, NC, United States

5:09pm – Acoustoelastic Dispersion Curves for LambWaves in the Presence of Stress GradientsTechnical Presentation. IMECE2018-89278Kranthi Prakash Peddeti, FLSmidth Inc./Villanova University,Bethlehem, PA, United States, Sridhar Santhanam, VillanovaUniversity, Collegeville, PA, United States

12-36 KEYNOTE LECTURES ONCOMPUTATIONAL MECHANICS12-36-2 Keynote Lectures on ComputationalMechanics – 2Fourth Floor, David L. Lawrence Convention Center, Room 402

3:45pm–5:30pm

Session Chair: Ashfaq Adnan, University of Texas at Arlington,Arlington, TX, United States


3:45pm – Efficient Iterative Solvers for Multiscale andMultiphysics ProblemsInvited Presentation. IMECE2018-88805Suvranu De, Rensselaer Polytechnic Institute, Troy, NY, UnitedStates

4:27pm – Dynamic Fracture of Metals: A Unified ModelingApproachInvited Presentation. IMECE2018-88904Haim Waisman, Columbia University, New York, NY, UnitedStates

5:09pm – Advances in Multiscale and Multiphysics MethodsTechnical Presentation. IMECE2018-88907Qian Qian, University of Texas at Dallas, Richardson, TX,United States

12-38 YOUNG MEDALIST SYMPOSIUM12-38-2 Young Medalist SymposiumFourth Floor, David L. Lawrence Convention Center, Room 401

3:45pm–5:30pm

Session Chair: Dennis Kochmann, ETH Zurich, Zurich,Switzerland

3:45pm – Morphable 3D Mesostructures andMicroelectronic Devices by Multistable BucklingMechanicsTechnical Presentation. IMECE2018-89279Yihui Zhang, Tsinghua University, Beijing, China

4:06pm – Structural and Microstructural Influence onDeformation and Fracture of Dual-Phase SteelsTechnical Presentation. IMECE2018-89288Xinzhu Zheng, Texas A&M University, College Station, TX,United States, Shmuel Osovski, Technion – Israeli Institute ofTechnology, Haifa, Israel, Ankit Srivastava, Texas A&MUniversity, College Station, TX, United States

4:27pm – Combining High-Stiffness and High-Damping inCeramics via the Domain Switching Mechanism inFerroelectricsTechnical Presentation. IMECE2018-89771Charles Wojnar, Missouri S&T, Rolla, MO, United States


182


12-40 PLENARY12-40-1 Mechanics of Solids, Structures and FluidsPlenary IThird Floor, David L. Lawrence Convention Center, Room 308

8:00am–8:45am

8:00am – The Isogeometric Approach to AnalysisPlenary Presentation. IMECE2018-90104Thomas Hughes, Jr., University of Texas at Austin, Austin, TX,United States

12-40 PLENARY12-40-2 Mechanics of Solids, Structures and FluidsPlenary IIThird Floor, David L. Lawrence Convention Center, Room 308

9:00am–9:45am

9:00am – How to Design Quasibrittle and LamellarBiomimetic Structures for Failure ProbabilityPlenary Presentation. IMECE2018-90105Zdenek Bazant, Northwestern University, Evanston, IL, UnitedStates

12-1 MECHANICS OF SOFT MATERIALS12-1-4 Mechanics of Soft Materials: ConstitutiveModelingThird Floor, David L. Lawrence Convention Center, Room 336

10:00am–11:45am


10:00am – Conjugate Stress/Strain Pair Approach forAnisotropic MaterialsTechnical Presentation. IMECE2018-87172Alan Freed, Veysel Erel, Mingliang Jiang, Texas A&MUniversity, College Station, TX, United States

10:21am – A Generalized Approach to ImproveApproximation of Inverse Langevin FunctionTechnical Paper Publication. IMECE2018-88228Vahid Morovati, Roozbeh Dargazany, Hamid Mohammadi,Michigan State University, East Lansing, MI, United States

10:42am – An Improved Non-Gaussian Statistical Theory ofRubber Elasticity for Short ChainsTechnical Paper Publication. IMECE2018-88234Vahid Morovati, Roozbeh Dargazany, Michigan StateUniversity, East Lansing, MI, United States

11:03am – Modeling Tensile-Torsion Response of DoubleTwisted Helical YarnsTechnical Paper Publication. IMECE2018-88265Roozbeh Dargazany, Michigan State University, East Lansing,MI, United States, Jiaqi Lin, Massachusetts Institute ofTechnology, Cambridge, MI, United States, HamidMohammadi, Vahid Morovati, Michigan State University, EastLansing, MI, United States

11:24am – Micromechanics to Macroscale ConstitutiveModeling of Flexible FoamsTechnical Presentation. IMECE2018-89349Kevin Long, Dan Bolintineanu, Sharlotte L.B. Kramer,Robert Waymel, Enrico Quintana, Sandia NationalLaboratories, Albuquerque, NM, United States, MichaelNeilsen, Sandia National Laboratories, Lawrence, KS, UnitedStates

12-8 MULTI-SCALE COMPUTATIONS INFLUIDS, STRUCTURES, AND MATERIALS12-8-1 Multi-Scale Computations in Fluids,Structures, and Materials 1Fourth Floor, David L. Lawrence Convention Center, Room 401

10:00am–11:45am


Session Co-Chairs: Glaucio Paulino, University of Illinois atUrbana-Champaign, Urbana, IL, United States, Karel Matouš,University of Notre Dame, Notre Dame, IN, United States

10:00am – Fatigue Crack Propagation for Semi-EllipticalCracksTechnical Presentation. IMECE2018-87188Yozo Mikata, Bechtel, Niskayuna, NY, United States

10:21am – Multiresolution Modeling and Error Control Withan Adaptive Wavelet AlgorithmTechnical Presentation. IMECE2018-88577Cale Harnish, Karel Matouš, University of Notre Dame, NotreDame, IN, United States, Daniel Livescu, Los Alamos NationalLaboratory, Los Alamos, NM, United States

10:42am – Computational Mechanics of the Size Effectsand Shearbands Based on Coupled Thermo-MechanicalStrain Gradient Plasticity FrameworkTechnical Presentation. IMECE2018-87095George Voyiadjis, Yooseob Song, Louisiana State University,Baton Rouge, LA, United States

11:03am – Simultaneous Spatial and Temporal Coarse-Graining: From Particle Dynamics to ContinuumThermoelasticityTechnical Presentation. IMECE2018-89482Celia Reina, Xiaoguai Li, University of Pennsylvania,Philadelphia, PA, United States

11:24am – Supercoiling of Kirchhoff Rods UnderContinuously Distributed Electrostatic Charge and ItsApplication to DNATechnical Presentation. IMECE2018-89277Raushan Singh, Ajeet Kumar, Indian Institute of TechnologyDelhi, New Delhi, Delhi, India

TRACK 12 MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS – TUESDAY, NOVEMBER 13

183


10:00am–11:45am


Session Co-Chairs: Jeffrey Kysar, Columbia University, NewYork, NY, United States, Ryan Elliott, University of Minnesota,Saint Paul, MN, United States, Yashashree Kulkarni, Universityof Houston, Houston, TX, United States

10:00am – Mechanical Properties of P3HT:PCBM Bulk-Heterojunction Thin Films by Coarse-Grained MolecularDynamicsTechnical Presentation. IMECE2018-86446Joydeep Munshi, Ganesh Balasubramanian, LehighUniversity, Bethlehem, PA, United States

10:21am – Effect of Size and Crystallography in SiCNanowireTechnical Presentation. IMECE2018-89979Fazle Elahi, Md. Hossain, University of Delaware, Newark, DE,United States

10:42am – Crack Deflection-Penetration at a NanoscaleInterface of Graphene/hBN HeterostructureTechnical Presentation. IMECE2018-89981Tousif Ahmed, Md. Hossain, University of Delaware, Newark,DE, United States

11:03am – 2D Crystallization of Poly(Vinyl Alcohol)Monolayer on Graphene Oxide (GO) and Its Role inImproving Interfacial Shear Strength in GO at DifferentTemperatureTechnical Presentation. IMECE2018-89996Wei Gao, Arman Ghasemi, University of Texas at San Antonio,San Antonio, TX, United States

11:24am – In Silico Preparation and Mesoscopic Modellingof Carbon Nanotube Thin Films With Covalent Cross-LinksTechnical Presentation. IMECE2018-87658Alexey Volkov, Md. Abu Horaira Banna, University ofAlabama, Tuscaloosa, AL, United States

12-12 MECHANICS OF THIN-FILM ANDMULTI-LAYER STRUCTURES12-12-1 Mechanics of Thin-Film and Multi-LayerStructuresFourth Floor, David L. Lawrence Convention Center, Room 404

10:00am–11:45am

Session Chair: Shuodao Wang, Oklahoma State University,Stillwater, OK, United States

10:00am – Buckling of a Stiff Thin Film on an Elastic GradedCompliant SubstrateTechnical Presentation. IMECE2018-89232Jizhou Song, Zhejiang University, Hangzhou, Zhejiang, China

10:21am – Wrinkling and Cracking/Folding for MultiscaleHierarchical Surface MorphologiesTechnical Presentation. IMECE2018-89524Jianliang Xiao, University of Colorado Boulder, Boulder, CO,United States

10:42am – On Bistability of a Plate Driven by GeometricAsymmetryTechnical Presentation. IMECE2018-89980Guangchao Wan, Dartmouth College, Hanover, NH, UnitedStates, Qiaohang Guo, FuJian University of Technology,Fuzhou, China, Xiaomin Han, Shicheng Huang, Zi Chen,Dartmouth College, Hanover, NH, United States

11:03am – Spontaneous Buckling-Driven PeriodicDelamination of Thin Films on Soft Substrates Under LargeCompressionTechnical Presentation. IMECE2018-89248Qiuting Zhang, Temple University, Philadelphia, PA, UnitedStates, Jie Yin, Temple University, Haverford, PA, United States

11:24am – Understanding the Bending Behaviors ofMultilayer 2D MaterialsTechnical Presentation. IMECE2018-89090Zhaohe Dai, Nanshu Lu, University of Texas at Austin, Austin,TX, United States

12-19 COMPUTATIONAL FLUID-STRUCTURE INTERACTION12-19-4 Computational Fluid-Structure InteractionFourth Floor, David L. Lawrence Convention Center, Room 402

10:00am–11:45am


10:00am – Isogeometric Analysis of Thermal Multi-PhaseFlows and Its Applications to Bubble Dynamics andManufacturing ProcessesTechnical Presentation. IMECE2018-89506Jinhui Yan, University of Illinois at Urbana-Champaign,Urbana, IL, United States


184

10:21am – Analysis of the Fluid Motion Induced by aVibrating Lamina Through Free Surface-Lattice BoltzmannCoupled MethodTechnical Paper Publication. IMECE2018-87715Daniele Chiappini, Giovanni Di Ilio, University of RomeNiccoló Cusano, Rome, Rome, Italy, Gino Bella, University ofRome Tor Vergata, Rome, Rome, Italy

10:42am – Study on Acoustic Phenomena of Drop Impacton Elastic WallTechnical Presentation. IMECE2018-88974Wen Cheng, Beijing Institute of Technology, Beijing, China

11:03am – Numerical Modeling and Approximation of theCoupling Lamb Wave Propagation With Fluid-StructureInteraction ProblemTechnical Paper Publication. IMECE2018-87448Bhuiyan Shameem Mahmood Ebna Hai, Markus Bause,Helmut Schmidt University, Hamburg, Germany

11:24am – Wind Turbine Tower Inspection Improvementand Fatigue AnalysisTechnical Presentation. IMECE2018-89071Afshin H. Zahraee, Purdue University Northwest, Chicago, IL,United States

12-28 INSTABILITIES IN SOLIDS ANDSTRUCTURES12-28-4 Instabilities in Solids and Structures:Stability of Composites, Foams/Open-Cell MaterialsThird Floor, David L. Lawrence Convention Center, Room 338

10:00am–11:45am

Session Chair: Victor Lefevre, Northwestern University,Evanston, IL, United States

Session Co-Chair: George Kardomateas, Georgia Institute ofTechnology, Alpharetta, GA, United States

10:00am – Nonlinear High Order Analysis for the Bucklingand Post-Buckling Behavior of Sandwich CompositesTechnical Presentation. IMECE2018-89711Zhangxian Yuan, Georgia Institute of Technology, Atlanta, GA,United States, George Kardomateas, Georgia Institute ofTechnology, Alpharetta, GA, United States

10:21am – Numerical Modeling of Multiaxial Crushing ofOpen-Cell FoamsTechnical Presentation. IMECE2018-89131Chenglin Yang, Stelios Kyriakides, University of Texas atAustin, Austin, TX, United States

10:42am – Mechanics of Brittle FoamsTechnical Presentation. IMECE2018-89735Sirui Bi, Stavros Gaitanaros, Johns Hopkins University,Baltimore, MD, United States

11:03am – Macroscopic Instabilities and Domain Formationin Neo-Hookean LaminatesTechnical Presentation. IMECE2018-89307Joshua Furer, Pedro Ponte Castaòeda, University ofPennsylvania, Philadelphia, PA, United States

11:24am – Breaking Symmetry in Externally PressurizedSpherical Shells for Imperfection-Insensitive DesignsTechnical Presentation. IMECE2018-89888Xin Ning, Pennsylvania State University, Urbana, IL, UnitedStates

12-39 DRUCKER MEDAL SYMPOSIUM12-39-1 Drucker Medal SymposiumFourth Floor, David L. Lawrence Convention Center, Room 403

10:00am–11:45am

Session Chair: Wei Cai, Stanford University, Stanford, CA,United States

10:00am – Properties of the Eshelby Tensor and Existenceof the Equivalent Ellipsoidal Inclusion SolutionTechnical Presentation. IMECE2018-89382Wei Cai, Stanford University, Stanford, CA, United States,David Barnett, Stanford University, Sunnyvale, CA, UnitedStates

10:21am – Liquid Inclusions in Soft Materials: CapillaryEffect, Mechanical Stiffening and EnhancedElectromechanical ResponseTechnical Presentation. IMECE2018-89074Sana Krichen, University of Houston, Houston, TX, UnitedStates, Liping Liu, Rutgers, The State University of New Jerey,Piscataway, NJ, United States, Pradeep Sharma, University ofHouston, Houston, TX, United States

10:42am – The Waves of Phase ChangeTechnical Presentation. IMECE2018-89061Xanthippi Markenscoff, University of California, San Diego, La Jolla, CA, United States

11:03am – A Piezoelectric Inclusion of Arbitrary Shape WithWeakly and Highly Conducting Imperfect InterfaceTechnical Presentation. IMECE2018-89865Les Sudak, University of Calgary, Calgary, AB, Canada, Daniel McArthur, Becht Engineering, Calgary, AB, Canada

11:24am – Discrete Shear Transformation Zone (STZ)PlasticityTechnical Presentation. IMECE2018-89101Alan Needleman, Babak Kondori, Manish Vasoya, AhmedAmine Benzerga, Texas A&M University, College Station, TX,United States


185

12-1 MECHANICS OF SOFT MATERIALS12-1-5 Mechanics of Soft Materials: Bioinspirationand BiomimeticsThird Floor, David L. Lawrence Convention Center, Room 336

1:45pm–3:30pm

Session Chair: Sung Kang, Johns Hopkins University,Baltimore, MD, United States

1:45pm – Slack Lengths of the Bands of the Medial UlnarCollateral Ligament: Experiment and ModelTechnical Presentation. IMECE2018-87494David Jordan, Mark Carl Miller, University of Pittsburgh,Pittsburgh, PA, United States, Alexander Kharlamov,Allegheny General Hospital, Pittsburgh, PA, United States

2:06pm – Understanding the Tunable Adhesion of WrinkledSurfaces via a Lattice ModelTechnical Presentation. IMECE2018-87812Teng Zhang, Syracuse University, Syracuse, NY, United States

2:27pm – Bioinspired Materials With Self-AdaptableMechanical Properties and Self-Regeneration by CouplingMechanics and Chemistry Using Soft Stimuli-ResponsiveScaffoldsTechnical Presentation. IMECE2018-89038Santiago Orrego, Urszula Krekora, Decheng Hou, ZhezhiChen, Eugene Kang, Sung Kang, Johns Hopkins University,Baltimore, MD, United States

2:48pm – Elasticity as the Basis of Allostery in DNATechnical Presentation. IMECE2018-89049Jaspreet Singh, Prashant K. Purohit, University ofPennsylvania, Philadelphia, PA, United States

3:09pm – Nonlinear Elasticity of Scale Covered BiomimeticSubstrateTechnical Presentation. IMECE2018-89900Ranajay Ghosh, Hossein Ebrahimi, Hessein Ali, RyanHorton, University of Central Florida, Orlando, FL, UnitedStates


1:45pm–3:30pm


Session Co-Chairs: Glaucio Paulino, University of Illinois atUrbana-Champaign, Urbana, IL, United States, Yucheng Liu,Mississippi State University, Mississippi State, MS, UnitedStates

1:45pm – SH-Waves in 1D Phononic MetamaterialsTechnical Presentation. IMECE2018-88301Yozo Mikata, Bechtel, Niskayuna, NY, United States

2:06pm – Thermodynamically Consistent and PhysicallyMotivated Finite Deformation Strain Gradient PlasticityFrameworkInvited Presentation. IMECE2018-89259George Voyiadjis, Yooseob Song, Louisiana State University,Baton Rouge, LA, United States

2:48pm – Crystal Orientations Effects of Copper SingleCrystals Simulated by LAMMPS Employing ModifiedEmbedded Atomic MethodTechnical Presentation. IMECE2018-86284Yangqing Dou, Yucheng Liu, Mark Horstemeyer, MississippiState University, Starkville, MS, United States

3:09pm – Quantification of Material Degradation due toVoids and Fiber Breakage in Composite MaterialTechnical Presentation. IMECE2018-89503Vahid Tavaf, Mohammadsadegh Saadatzi, Sourav Banerjee,University of South Carolina, Columbia, SC, United States


1:45pm–3:30pm


1:45pm – Scaling Analyses for Mixed-Mode Transfer of 2DMaterialsTechnical Presentation. IMECE2018-89425Shruti Jain, Roger Bonnecaze, Kenneth Liechti, University ofTexas at Austin, Austin, TX, United States

2:06pm – Modeling the Granular/Metal Multi-LayeredStructure of Lithium-Ion BatteriesTechnical Presentation. IMECE2018-89467Juner Zhu, Massachusetts Institute of Technology, Cambridge,MA, United States, Wei Li, Tsinghua University, Beijing, Beijing,China, Tomasz Wierzbicki, Massachusetts Institute ofTechnology, Cambridge, MA, United States

2:27pm – Thermal Shrinkage Behavior of Battery SeparatorTechnical Paper Publication. IMECE2018-86621Shutian Yan, Michigan State University, East Lansing, MI,United States, Jie Deng, Chulheung Bae, Ford MotorCompany, Dearborn, MI, United States, Xinran Xiao, MichiganState University, Lansing, MI, United States

2:48pm – Measuring Adhesion between SiO2 and 2DTitanium Carbides (MXenes)Technical Presentation. IMECE2018-89405Chenglin Wu, Yanxiao Li, Vadym Mochalin, Shuohan Huang,Missouri University of Science and Technology, Rolla, MO,United States


186

3:09pm – Use of a Trilayer Shell Model to DetermineIntrinsic Stress Within Titanium-Silicon CarbonitrideCoatingTechnical Paper Publication. IMECE2018-87929Anurag Chakraborty, Forest Thompson, Jason Ash, PhilAhrenkiel, Frank Kustas, Robert Anderson, South DakotaSchool of Mines & Technology, Rapid City, SD, United States

12-17 CONGRESS-WIDE SYMPOSIUM ONADDITIVE MANUFACTURING: FAILURE OFADDITIVELY MANUFACTUREDMATERIALS12-17-1 Failure and Fracture of AdditivelyManufactured Materials and Structures – 1Third Floor, David L. Lawrence Convention Center, Room 335

1:45pm–3:30pm

Session Chair: H. Eliot Fang, Sandia National Laboratories,Albuquerque, NM, United States

Session Co-Chair: Ashfaq Adnan, University of Texas atArlington, Arlington, TX, United States

1:45pm – Deformation and Failure of an AdditivelyManufactured Casing With Optimized Graded Lattice InfillsTechnical Presentation. IMECE2018-89126Matthew Lynch, United Technologies Research Center, EastHartford, CT, United States, Lin Cheng, Albert To, Universityof Pittsburgh, Pittsburgh, PA, United States

2:06pm – Deformation and Failure of an AdditivelyManufactured Casing With Optimized Graded Lattice InfillsPart IITechnical Presentation. IMECE2018-90000Matthew Lynch, United Technologies Research Center, EastHartford, CT, United States, Lin Cheng, Albert To, Universityof Pittsburgh, Pittsburgh, PA, United States

2:27pm – Topology Optimization Design of TransmissionStructure in Flapping-Wing Micro Aerial Vehicle via 3DPrintingTechnical Presentation. IMECE2018-88787Zuyong Chen, Jianghao Wu, Beihang University, Beijing,Beijing, China

2:48pm – Predicting Performance and Failure in AdditivelyManufactured Stainless Steel PartsTechnical Presentation. IMECE2018-89336Kyle L. Johnson, John M. Emery, Chris I. Hammetter, JudithA. Brown, Spencer Grange, Kurtis R. Ford, Joseph Bishop,Sandia National Laboratories, Albuquerque, NM, United States

3:09pm – Prediction of Failure for Multi-Phase CompositesFabricated via Multi-Material 3D PrintingTechnical Presentation. IMECE2018-90039Yaning Li, Lei Lui, Richard Nash, University of NewHampshire, Durham, NH, United States

12-28 INSTABILITIES IN SOLIDS ANDSTRUCTURES12-28-5 Instabilities in Solids and Structures: PhaseTransformations/Transitions and Multi-StabilityThird Floor, David L. Lawrence Convention Center, Room 338

1:45pm–3:30pm

Session Chair: Katia Bertoldi, Harvard University, Cambridge,MA, United States

Session Co-Chair: Hiro Tanaka, Osaka University, Osaka,Japan

1:45pm – Effect of Phase Transformation on the Stability ofPseudoelastic NiTi Tubes Under BendingTechnical Presentation. IMECE2018-89095Karlos Kazinakis, Stelios Kyriakides, Chad Landis,University of Texas at Austin, Austin, TX, United States

2:06pm – Instability and Self-Folding of One-DimensionalNanomaterials by Liquid EvaporationTechnical Presentation. IMECE2018-89107Qingchang Liu, Baoxing Xu, University of Virginia,Charlottesville, VA, United States

2:27pm – Propagation of Non-Linear Waves in 2DMechanical Metamaterials Based on Bistable ShallowArchesTechnical Presentation. IMECE2018-89431Gabriele Librandi, Harvard University, Cambridge, MA, UnitedStates, Eleonora Tubaldi, University of Arizona, Tucson, AZ,United States, Katia Bertoldi, Harvard University, Cambridge,MA, United States

2:48pm – Elastic and Viscoelastic Transition Responses ofSpecific Repetitive Structural Systems Subjected toUniaxial Compressive LoadingTechnical Presentation. IMECE2018-88760Hiro Tanaka, Kazutoshi Hamada, Gakuto Yamanokuchi, Yoji Shibutani, Osaka University, Osaka, Japan

12-31 MECHANICAL METAMATERIALS12-31-1 Design of Mechanical MetamaterialsFourth Floor, David L. Lawrence Convention Center, Room 402

1:45pm–3:30pm

Session Chair: Jongmin Shim, University at Buffalo, StateUniversity of New York, Buffalo, NY, United States

Session Co-Chair: Jie Yin, Temple University, Haverford, PA,United States

1:45pm – Computational Design of Multistable PrismaticArchitected MaterialsInvited Presentation. IMECE2018-89021Johannes T.B. Overvelde, Agustin Iniguez-Rabago, AMOLF,Amsterdam, Netherlands


187

2:27pm – Accelerated Search and Design for StretchableGraphene Kirigami Using Machine LearningTechnical Presentation. IMECE2018-88956Harold Park, Boston University, Brookline, MA, United States,Paul Hanakata, Boston University, Boston, MA, United States,Ekin Cubuk, Google Brain, Mountain View, CA, United States,David Campbell, Boston University, Boston, MA, UnitedStates

2:48pm – Heterogeneously Architected Meta-Structures byMechanics DesignTechnical Presentation. IMECE2018-89033Baoxing Xu, University of Virginia, Charlottesville, VA, UnitedStates

3:09pm – 3D Construction of a Tilted Cuboid MechanicalMetamaterialTechnical Paper Publication. IMECE2018-87050Yunfang Yang, Zhong You, University of Oxford, Oxford,United Kingdom


1:45pm–3:30pm


1:45pm – Is There a Universal Exponent for the ActivationEnergy of Dislocation Nucleation?Technical Presentation. IMECE2018-89587Christopher Weinberger, Anik H.M. Faisal, Colorado StateUniversity, Fort Collins, CO, United States

2:06pm – A Phase Field Model for Brittle Fracture Based onHomogenizationTechnical Presentation. IMECE2018-89188Yongxing Shen, Cheng Cheng, Shanghai Jiao TongUniversity, Shanghai, China

2:27pm – Architecture in Biological Materials: A Templatefor Toughness Enhancement or a Siren Song?Technical Presentation. IMECE2018-89885Haneesh Kesari, Brown University, Providence, RI, UnitedStates

2:48pm – Dislocation Dynamics Simulations of MaterialsWith Complex PhysicsTechnical Presentation. IMECE2018-89319Sylvie Aubry, Lawrence Livermore National Laboratory,Livermore, CA, United States

3:09pm – Probing Defect-Controlled Plasticity at SmallScale via Multiscale Discrete Defect Element MethodTechnical Presentation. IMECE2018-89502Ill Ryu, University of Texas at Dallas, Richardson, TX, UnitedStates, Taejoon Park, Ohio State University, Columbus, OH,United States, Cuong Nguyen, University of Texas at Dallas,Richardson, TX, United States, Farhang Pourboghrat, OhioState University, Columbus, OH, United States

12-1 MECHANICS OF SOFT MATERIALS12-1-6 Mechanics of Soft Materials: Electro/Magneto/Chemo-MechanicsThird Floor, David L. Lawrence Convention Center, Room 336

3:45pm–5:30pm

Session Chair: Robert L. Lowe, University of Dayton, Dayton,OH, United States

3:45pm – The Effect of Terfenol-D Particles on theElectroactive Properties of PVDF-TrFE CompositesTechnical Presentation. IMECE2018-89969Scott Newacheck, George Youssef, San Diego StateUniversity, San Diego, CA, United States

4:00pm – Micro-Mechanical Model for Thermo-OxidativeAging of ElastomersTechnical Paper Publication. IMECE2018-88109Hamid Mohammadi, Roozbeh Dargazany, Michigan StateUniversity, East Lansing, MI, United States

4:15pm – Chemo-Mechanically Coupled Constitutive Modelfor High Temperature Oxidation in PolymersTechnical Presentation. IMECE2018-89009Shabnam Konica, Trisha Sain, Michigan TechnologicalUniversity, Houghton, MI, United States

4:30pm – Adaptable Liquid Crystal Elastomers WithTransesterification-Based Bond Exchange ReactionsTechnical Presentation. IMECE2018-89235Kai Yu, University of Colorado Denver, Denver, CO, UnitedStates

4:45pm – Large-Strain Constitutive Modeling of SoftMultiferroic Magnetoelectric MaterialsTechnical Presentation. IMECE2018-89583Robert L. Lowe, Hafez Tari, University of Dayton, Dayton, OH,United States

5:00pm – Modeling Hysteresis in Magneto/Electro-Active,Soft Elastomeric, and Shape Memory MaterialsTechnical Presentation. IMECE2018-89647Hafez Tari, University of Dayton, Dayton, OH, United States


188


3:45pm–5:30pm


Session Co-Chairs: Glaucio Paulino, University of Illinois atUrbana-Champaign, Urbana, IL, United States, Huijuan Zhao,Clemson University, Clemson, SC, United States, AhmadNajafi, Drexel University, Philadelphia, PA, United States

3:45pm – Multi-Scale Design of Periodic NonlinearMaterials Using a Gradient-Based Shape OptimizationTechnical Presentation. IMECE2018-88080Ahmad Najafi, Drexel University, Philadelphia, PA, UnitedStates, Masoud Safdari, University of Illinois at Urbana-Champaign, Champaign, IL, United States

4:06pm – Constructal Approach for Stability Analysis ofInitially Twisted Beam Under Distributed Follower ForcesTechnical Presentation. IMECE2018-88020Shanae Powell, Ehsan Izadpanahi, Siavash Rastkar, FloridaInternational University, Miami, FL, United States, PezhmanMardanpour, Florida International University, Weston, FL,United States

4:27pm – Analysis of Parametric Uncertainty and Sensitivityin Multi-Scale Modeling of Shock Response of a PressedEnergetic MaterialTechnical Presentation. IMECE2018-89057Sangyup Lee, Oishik Sen, Nirmal Kumar Rai, H.S.Udaykumar, University of Iowa, Iowa City, IA, United States

4:48pm – Molecular Dynamics Simulation on Fused SilicaUnder Shock ImpactTechnical Presentation. IMECE2018-89569Huijuan Zhao, Clemson University, Clemson, SC, UnitedStates

5:09pm – Development and Computational AnalysisEvaluation of Miscible Fluids Into a Flow MixerTechnical Presentation. IMECE2018-89048Jeniffer A.M. Lopes, Altibano Ortenzi, Londrina StateUniversity, Londrina, Paran, Brazil


3:45pm–5:30pm


3:45pm – Composite Fabric Blankets for Plastic GearsTechnical Paper Publication. IMECE2018-86074Hany Ghoneim, Alfonso Fuentes-Aznar, Sachin Kini,Rochester Institute of Technology, Rochester, NY, United States

4:00pm – Vacancy Engineering and Phase Transformationin Zirconium Thin FilmsTechnical Presentation. IMECE2018-86351Zahabul Islam, Baoming Wang, Pennsylvania StateUniversity, State College, PA, United States, Md. Haque,Pennsylvania State University, University Park, PA, UnitedStates

4:15pm – Numerical Prediction of Fatigue Life of CompositeHybrid JointTechnical Presentation. IMECE2018-89913Shah Alam, Vishveshwara Chitturi, Texas A&M University -Kingsville, Kingsville, TX, United States

4:30pm – Indentation-Induced Deformation and Damage inMetal-Ceramic Multilayer Thin FilmsTechnical Presentation. IMECE2018-86239Yu-Lin Shen, University of New Mexico, Albuquerque, NM,United States

4:45pm – Experimental Research on Tensile and Tearing ofThin-Wall Polymer Scraps of End-of-Life Vehicles andHousehold AppliancesTechnical Paper Publication. IMECE2018-86036Jianxiong Liu, Kunming University of Science and Technology,Kunming, Yunnan, China, Anmin Chang, Valmont Industries(China) Ltd., Shanghai, Shanghai, China, Wei Liu, KunmingUniversity of Science and Technology, Kunming, Yunnan, China

5:00pm – Finite Element Simulation of Cracks Propagationin Rolling Contact Applications With and Without CoatingApplied in Industrial FieldTechnical Paper Publication. IMECE2018-86308Monzer Al Esber, University of Balamand, Tripoli, LebanonNorth, Lebanon, Gabi Nehme, University of Balamand, El-Koura, Lebanon North, Lebanon


189

12-13 RECENT ADVANCES ANDAPPLICATIONS IN MESHFREE ANDPARTICLE METHODS12-13-2 Recent Advances and Applications inMeshfree and Particle MethodThird Floor, David L. Lawrence Convention Center, Room 338

3:45pm–5:30pm

Session Chair: C.T. Wu, Livermore Software TechnologyCorporation, Livermore, CA, United States

Session Co-Chair: Michael Hillman, Pennsylvania StateUniversity, University Park, PA, United States

3:45pm – Gradient Reproducing Kernel Collocation Methodfor High Order PDEsTechnical Presentation. IMECE2018-88725Sheng-Wei Chi, Ashkan Mahdavi, University of Illinois atChicago, Chicago, IL, United States

4:00pm – A Coupled Immersed IGA-RKPM Formulation forAir-Blast-Structure InteractionTechnical Presentation. IMECE2018-89855Georgios Moutsanidis, University of California, San Diego,San Diego, CA, United States, Yuri Bazilevs, Brown University,Providence, RI, United States

4:15pm – The Conforming Reproducing Kernel Method foran Agile Design-to-Simulation WorkflowTechnical Presentation. IMECE2018-90041Jacob Koester, Sandia National Laboratories, Albuquerque,NM, United States, Jiun-Shyan Chen, University of California,San Diego, La Jolla, CA, United States, Michael Tupek, ScottMitchell, Joseph Bishop, Sandia National Laboratories,Albuquerque, NM, United States

4:30pm – A Conforming Reproducing Kernel Finite VolumeMethodTechnical Presentation. IMECE2018-89884Michael Hillman, Pennsylvania State University, UniversityPark, PA, United States, Saili Yang, Pennsylvania StateUniversity, State College, PA, United States

4:45pm – Advances in RVE Large Deformation Analysis ofHeterogeneous Structures Using an Immersed ParticleModeling Method and Mechanistic Machine LearningTechnologyTechnical Presentation. IMECE2018-88773Zeliang Liu, C.T. Wu, Livermore Software TechnologyCorporation, Livermore, CA, United States

5:00pm – A Comparison Between ANCF and SPH Methodsfor Liquid Sloshing ProblemsTechnical Presentation. IMECE2018-89660Mohammed Mujtaba Atif, Emanuele Grossi, University ofIllinois at Chicago, Chicago, IL, United States

12-17 CONGRESS-WIDE SYMPOSIUM ONADDITIVE MANUFACTURING: FAILURE OFADDITIVELY MANUFACTUREDMATERIALS12-17-2 Failure and Fracture of AdditivelyManufactured Materials and Structures – 2Third Floor, David L. Lawrence Convention Center, Room 335

3:45pm–5:30pm

Session Chair: Ashfaq Adnan, University of Texas Arlington,Arlington, TX, United States

Session Co-Chair: H. Eliot Fang, Sandia NationalLaboratories, Albuquerque, NM, United States

3:45pm – Role of Build Architecture and Loading Rate onQuasi-Static and Dynamic Fracture Behaviors of AdditivelyPrinted ABS Studied Using DICTechnical Presentation. IMECE2018-87028John P. Isaac, Hareesh Tippur, Auburn University, Auburn,AL, United States

4:06pm – Characterizing the Increase in Inter-Bead BondStrength of FDM Parts Due to Thermal AnnealingTechnical Presentation. IMECE2018-89193Rhugdhrivya Rane, Robert M. Taylor, University of Texas atArlington, Arlington, TX, United States

4:27pm – AFM Analysis of Polybutadiene Distribution in theWeld Zones of FDM-Printed ABS DogbonesTechnical Presentation. IMECE2018-89732David Collinson, Northwestern University, Evanston, IL, UnitedStates

4:48pm – Additive Manufacturing and MechanicalProperties of Bonelike Ultra-Light NanocompositeStructuresTechnical Presentation. IMECE2018-89773Sheikh Ferdous, University of Massachusetts Dartmouth,Dartmouth, MA, United States, Ashfaq Adnan, SushmaPothana, University of Texas at Arlington, Arlington, TX, UnitedStates

5:09pm – Thermal Modeling and Meltpool Monitoring ofLaser Melting of SS 17-4 PHTechnical Presentation. IMECE2018-89960Adrian Lew, Stanford University, Stanford, CA, United States


190

12-31 MECHANICAL METAMATERIALS12-31-2 Functionality of Mechanical MetamaterialsFourth Floor, David L. Lawrence Convention Center, Room 402

3:45pm–5:30pm

Session Chair: Lifeng Wang, Stony Brook University, StonyBrook, NY, United States

Session Co-Chair: Jaehyung Ju, Shanghai Jiao TongUniversity, Shanghai, China

3:45pm – An Origami-Based Metamaterial WithProgrammable Multi-Stability and Anisotropic BehaviorTechnical Presentation. IMECE2018-87142Soroush Kamrava, Northeastern University, Allston, MA,United States, Ashkan Vaziri, Northeastern University, Boston,MA, United States

4:06pm – Pseudo-Bistable Mechanics of 3D-PrintedMetastructures And Metamaterials With Snap-ThroughInstabilitiesTechnical Presentation. IMECE2018-89745Julien Meaud, Kaikai Che, Georgia Institute of Technology,Atlanta, GA, United States

4:27pm – Temperature-Triggered Metamaterial Platformsfor Biomedical ApplicationsTechnical Presentation. IMECE2018-89794Sahab Babaee, Simo Pajovic, Ameya R. Kirtane, Jiuyun Shi,Kaitlyn Hess, Ester Caffarel-Salvador, Joy E. Collins,Siddartha Tamang, Aniket V. Wahane, Alison M. Hayward,Hormoz Mazdiyasni, Giovanni Traverso, Robert Langer,Massachusetts Institute of Technology, Cambridge, MA, UnitedStates

4:48pm – Metabiomaterials Based on Minimal SurfaceSkeletal NetsTechnical Presentation. IMECE2018-89302Sebastien Callens, DeAmir Abbas Zadpoor, Delft Universityof Technology, Delft, Netherlands

5:09pm – Fabrication, Characterization and MechanicalBehaviors of Three-Dimensional High-Entropy Alloy-Polymer Composite NanolatticesTechnical Presentation. IMECE2018-89230Xiaoyan Li, Xuan Zhang, Tsinghua University, Beijing, China


3:45pm–5:30pm


3:45pm – Growth, Characterization and Modeling of SingleCrystalline and Bi-Crystalline Thin Films of Gold onAmorphous Insulating SubstratesTechnical Presentation. IMECE2018-89374William Nix, Rui Yang, Rachel Traylor, Stanford University,Stanford, CA, United States, Ill Ryu, University of Texas atDallas, Richardson, TX, United States, Jonathan Fan, StanfordUniversity, Stanford, CA, United States

4:06pm – Mechanical Behavior of Solder InterconnectsUnder High Current DensityTechnical Presentation. IMECE2018-89121Leon Keer, Northwestern University, Evanston, IL, UnitedStates, Yao Yao, Northwestern Polytechnical University, Xi’an,China

4:27pm – Mechanics of Metallic Nanowires—StressRelaxation and Diffusion-Mediated FailureTechnical Presentation. IMECE2018-89385Horacio D. Espinosa, Northwestern University, Evanston, IL,United States, Wei Cai, Stanford University, Stanford, CA,United States, Rajaprakash Ramachandramoorthy,Northwestern University, Evanston, IL, United States, Yanming Wang, Amin Aghaei, Stanford University, Palo Alto,CA, United States, Gunther Richter, Max Planck Institute,Stuttgart, Germany

4:48pm – Mechanical Properties of Metallic Nanocubes:Bimetallic Interfaces and Controlled PorosityTechnical Presentation. IMECE2018-89102Wendy Gu, Stanford University, Palo Alto, CA, United States,Mehrdad Kiani, Radhika Patil, Wei Cai, Yifan Wang, StanfordUniversity, Stanford, CA, United States

5:09pm – A New Type of Superelastic and Shape MemoryMaterials: ThCr2Si2-Structured Intermetallic Compound atSmall Length ScalesTechnical Presentation. IMECE2018-90040Seok-Woo Lee, University of Connecticut, Storrs, CT, UnitedStates


191


12-1 MECHANICS OF SOFT MATERIALS12-1-7 Mechanics of Soft Materials: CharacterizationThird Floor, David L. Lawrence Convention Center, Room 338

10:00am–11:45am


10:00am – Synchrotron In Situ Tomography Observation ofDamage Mechanism Transition in UV Aged Polyamide-6Technical Presentation. IMECE2018-89616Kenneth Noel Cundiff, Texas A&M University, College Station,TX, United States, Yazid Madi, Mines ParisTech, Paris, France,Ahmed Amine Benzerga, Texas A&M University, CollegeStation, TX, United States

10:21am – Limitations of Tensile Test for Modeling ComplexDeformations of Hyperelastic MaterialsTechnical Presentation. IMECE2018-89014Kshitiz Upadhyay, Ghatu Subhash, Douglas Spearot,University of Florida, Gainesville, FL, United States

10:42am – Novel AFM-Based Dynamic IndentationExperiments to Capture Local Viscoelastic MechanicalProperty Distributions in Soft Heterogeneous MaterialsTechnical Presentation. IMECE2018-89653Pavan Kolluru, Duke University, Durham, NC, United States,Matthew Eaton, David Collinson, David Delgado, KennethShull, Northwestern University, Evanston, IL, United States, L.Catherine Brinson, Duke University, Durham, NC, UnitedStates

11:03am – High Strain Rate Dynamic Behavior ofMechanophore Embedded Silicone ElastomersTechnical Presentation. IMECE2018-89750Logan Shannahan, Army Research Laboratory, Aberdeen, MD,United States, James Berry, SURVICE Engineering, Inc.,Aberdeen Proving Ground, MD, United States, Yangju Lin,Meredith Barbee, Stephen Craig, Duke University, Durham,NC, United States, Muge Fermen-Coker, Army ResearchLaboratory, Aberdeen Proving Ground, MD, United States

11:24am – Characterization of a Polyurea MicrosphereReinforced Polyurea Matrix CompositeTechnical Presentation. IMECE2018-89766Sophia Do, George Youssef, San Diego State University, San Diego, CA, United States

12-4 MECHANICS OF ADHESION ANDFRICTION12-4-1 Mechanics of Adhesion and FrictionFourth Floor, David L. Lawrence Convention Center, Room 402

10:00am–11:45am

Session Chair: Jianliang Xiao, University of Colorado Boulder,Boulder, CO, United States

10:00am – Mechanics of Adhesion and Friction in 2DMaterialsInvited Presentation. IMECE2018-89143Frank DelRio, National Institute of Standards and Technology,Louisville, CO, United States, Bien-Cuong Tran Khac, Koo-Hyun Chung, University of Ulsan, Ulsan, Korea (Republic)

10:42am – Frictional Characteristics of Graphene WrappedNanodiamond and Graphitized Nanodiamond UsingMolecular Dynamics SimulationTechnical Presentation. IMECE2018-89928Srilok Srinivasan, Iowa State University, Ames, IA, UnitedStates, Diana Berman, University of North Texas, Denton, TX,United States, Ganesh Balasubramanian, Lehigh University,Bethlehem, PA, United States, Subramanian K.R.S.Sankaranarayanan, Argonne National Laboratory, Lemont, IL,United States, Ali Erdemir, Argonne National Laboratory,Argonne, IL, United States, Anirudha Sumant, ArgonneNational Laboratory, Lemont, IL, United States

11:03am – Nanoscale Probing of Interaction in AtomicallyThin Layered MaterialsTechnical Presentation. IMECE2018-88319Hossein Rokni, Wei Lu, University of Michigan, Ann Arbor, MI,United States

11:24am – Atomic-Scale Tribology Elucidated by In SituApproachesTechnical Presentation. IMECE2018-89544Robert W. Carpick, University of Pennsylvania, Philadelphia,PA, United States

TRACK 12 MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS – WEDNESDAY, NOVEMBER 14

192

12-7 MULTISCALE MODELS ANDEXPERIMENTAL TECHNIQUES FORCOMPOSITE MATERIALS ANDSTRUCTURES12-7-1 Multiscale Models and ExperimentalTechniques for Composite Materials and StructuresFourth Floor, David L. Lawrence Convention Center, Room 403

10:00am–11:45am


10:00am – Damage Characterization of Carbon and GlassFiber Composite Plates Subjected to Low-Velocity ImpactUsing ThermographyTechnical Paper Publication. IMECE2018-86543Khaled Al-Athel, King Fahd University of Petroleum &Minerals, Dhahran, Saudi Arabia, Ahmed Alomari, SaudiAramco, Dammam, Saudi Arabia, Abul Fazal M. Arif, KingFahd University of Petroleum & Minerals, Dhahran, SaudiArabia

10:21am – Analysis of Coated Fibrous MultiferroicComposites Subjected to Large Electric Driving FieldTechnical Presentation. IMECE2018-86968Sheng-hsiang Chen, Chien-hong Lin, National Cheng KungUniversity, Tainan, Taiwan

10:42am – Utility of 2D Finite Element Simulations forPredicting Effective Thermomechanical Properties ofParticle-Reinforced CompositesTechnical Paper Publication. IMECE2018-87031Kamran Makarian, Villanova University, Ardmore, PA, UnitedStates, Sridhar Santhanam, Villanova University, Collegeville,PA, United States

11:03am – Development of Novel Compact CompressionSpecimen for Matrix Compression Damage Initiation andPropagation Behavior in Fiber Reinforced CompositesTechnical Paper Publication. IMECE2018-87106Tim McKinley, Kevin Carpenter, John P. Parmigiani, OregonState University, Corvallis, OR, United States

11:24am – A Multi-Scale Processing Model for PredictingCure-Induced Residual Stress in Thermoset CompositesTechnical Presentation. IMECE2018-89866Weijia Chen, Dianyun Zhang, University of Connecticut,Storrs, CT, United States


10:00am–11:45am


10:00am – An Analysis of Metal-Composite Hybrid Joint forStatic LoadingTechnical Presentation. IMECE2018-89625Shah Alam, Ulan Dakeev, Mohammad Saquib, Texas A&MUniversity - Kingsville, Kingsville, TX, United States

10:21am – Effects of Plasticity on the Creping Process inthe Manufacturing of Tissue PaperTechnical Presentation. IMECE2018-89265Kui Pan, A. Srikantha Phani, Sheldon Green, University ofBritish Columbia, Vancouver, BC, Canada

10:42am – Experimental investigation Into EnergyAmplification in Tri-Layer Polymer/Polymer CompositesTechnical Presentation. IMECE2018-89958George Youssef, Brian Wang, San Diego State University, SanDiego, CA, United States

11:03am – Study on Dynamic Performance of the Non-Circular Bearings Using Fourier AnalysisTechnical Paper Publication. IMECE2018-88420Jiale Tian, Baisong Yang, Lie Yu, Jian Zhou, Xi’an JiaotongUniversity, Xi’an, China

11:24am – Research on Topology Optimization of Level SetMethod Based on Incompatible ElementTechnical Presentation. IMECE2018-88915Dongyue Qu, Haibing Zhang, Jianan Xu, Qiang Chen, HarbinEngineering University, Harbin City, China


193

12-21 SYMPOSIUM ON MODELING OF THEFRACTURE, FAILURE AND FATIGUE INSOLIDS12-21-1 Fatigue Modeling in Engineering MaterialsFourth Floor, David L. Lawrence Convention Center, Room 405

10:00am–11:45am

Session Chair: Ke Li, Schlumberger, Sugar Land, TX, UnitedStates

Session Co-Chair: Huijuan Zhao, Clemson University,Clemson, SC, United States

10:00am – Characterizing the Fatigue Behavior of WroughtFe-Co-2V Using Experimental, Computational, andAnalytical TechniquesTechnical Presentation. IMECE2018-89185Matthew J. Mills, University of California, Davis, Davis, CA,United States, Jacob Biddlecom, Clemson University,Clemson, SC, United States, Benedict Pineyro, Embry-RiddleAeronautical University, Daytona Beach, FL, United States,Tariq Khraishi, University of New Mexico, Albuquerque, NM,United States, Kyle L. Johnson, Scott Grutzik, Adam Brink,Sandia National Laboratories, Albuquerque, NM, United States,Matthew Brake, Rice University, Houston, TX, United States

10:21am – Numerical Evaluation of Fatigue Crack Growth inIonomer Membrane Based on Plastically Dissipated EnergyTechnical Presentation. IMECE2018-89674Morshed Hasan, University of Dealware, Newark, DE, UnitedStates, Jixin Chen, Ford Motor Company, Dearborn, MI,United States, Anette Karlsson, Cleveland State University,Cleveland, OH, United States, Michael Santare, University ofDelaware, Newark, DE, United States

10:42am – Fatigue Life Prediction of Cold Rolled RotaryShouldered Threaded ConnectionsTechnical Paper Publication. IMECE2018-87801Fei Song, Michael Du, Ke Li, Schlumberger, Sugar Land, TX,United States

11:03am – Mechanics of Fatigue Failure of AluminumCenter Crack Tension Specimens and Repair Using LowModulus Composite PatchesTechnical Presentation. IMECE2018-87205Hugh Bruck, University of Maryland, College Park, MD, UnitedStates, Daniel Hart, Paul Lara, NSWC Carderock, WestBethesda, MD, United States

12-31 MECHANICAL METAMATERIALS12-31-3 Mechanics of Mechanical MetamaterialsFourth Floor, David L. Lawrence Convention Center, Room 401

10:00am–11:45am

Session Chair: Eduard Karpov, University of Illinois atChicago, Glenview, IL, United States

Session Co-Chair: Sung Kang, Johns Hopkins University,Baltimore, MD, United States

10:00am – Auxetic Composite Metamaterials WithEnhanced Mechanical PropertiesTechnical Presentation. IMECE2018-89285Lifeng Wang, Stony Brook University, Stony Brook, NY, UnitedStates

10:21am – Study on the Phononic Band-Structure of SoftGranular CrystalsTechnical Presentation. IMECE2018-89097Nidhish Jain, Jongmin Shim, University at Buffalo, StateUniversity of New York, Buffalo, NY, United States

10:42am – Undulated Lattice Structures by Vertices—Torsion for Elastic Wave FilteringTechnical Presentation. IMECE2018-89091Zhihao Yuan, Jaehyung Ju, Shanghai Jiao Tong University,Shanghai, China

11:03am – Strain Energy Transformation Pathways in HighlyNonlocal Mechanical MetamaterialsTechnical Presentation. IMECE2018-89974Eduard Karpov, University of Illinois at Chicago, Glenview, IL,United States, Larry Danso, John Klein, University of Illinois atChicago, Chicago, IL, United States

11:24am – Mimicking Pseudo-Elastic Behavior and ShapeMemory Effect Using Architectured MetamaterialsTechnical Presentation. IMECE2018-87239Yunlan Zhang, Mirian Velay, Kristiaan Hector, PurdueUniversity, West Lafayette, IN, United States, David Restrepo,San Antonio University, San Antonio, TX, United States,Nilesh Mankame, General Motors Research & Development,Warren, MI, United States, Pablo Zavattieri, Purdue University,West Lafayette, IN, United States

12-1 MECHANICS OF SOFT MATERIALS12-1-8 Mechanics of Soft Materials: Fracture,Dissipation, and Self-HealingThird Floor, David L. Lawrence Convention Center, Room 338

1:45pm–3:30pm

Session Chair: Aurelie Azoug, Oklahoma State University,Stillwater, OK, United States

1:45pm – Self-Healing Mechanics of Soft PolymersTechnical Presentation. IMECE2018-89726Qiming Wang, University of Southern California, Los Angeles,CA, United States


194

2:06pm – Material Sink Approach for Modeling Fracture ofSoft SolidsTechnical Presentation. IMECE2018-89031Konstantin Volokh, Technion - Israel Institute of Technology,Haifa, Israel

2:27pm – A Gradient Damage Model of PolydispersePolymersTechnical Presentation. IMECE2018-89388Bin Li, Nikolaos Bouklas, Cornell University, Ithaca, NY,United States

2:48pm – Dissipations in Liquid Crystal Elastomers at theNematic-Isotropic TransitionTechnical Presentation. IMECE2018-89590Aurelie Azoug, Jeb Wallace, Oklahoma State University,Stillwater, OK, United States

3:09pm – Rehealable, Fully Recyclable and MalleableElectronic Skin Enabled by Dynamic Covalent ThermosetNanocompositeTechnical Presentation. IMECE2018-89639Zhanan Zou, Jianliang Xiao, University of Colorado Boulder,Boulder, CO, United States


1:45pm–3:30pm

Session Chair: Chenglin Wu, Missouri University of Scienceand Technology, Rolla, MO, United States

1:45pm – Atomic Scale Friction in DNA PlectonemesTechnical Presentation. IMECE2018-89023Prashant K. Purohit, Yifei Min, University of Pennsylvania,Philadelphia, PA, United States

2:06pm – Surface Roughness Dependent Adhesion: FiniteElement Modeling and AnalysisTechnical Presentation. IMECE2018-89081Weilin Deng, Haneesh Kesari, Brown University, Providence,RI, United States

2:27pm – Crater-enabled dry adhesionTechnical Presentation. IMECE2018-89209Liu Wang, Kyoungho Ha, Shutao Qiao, Nanshu Lu,University of Texas at Austin, Austin, TX, United States

2:48pm – Characterizing Adhesion of Silver Nano WireGraphene Composite in Multi-Layered StructureTechnical Presentation. IMECE2018-89403Chenglin Wu, Yanxiao Li, Congjie Wei, Missouri University ofScience and Technology, Rolla, MO, United States

3:09pm – Tunable Dry Adhesion of Elastomeric PostsEnabled by Stiffness Tuning of Microfluidic SerpentineChannel of LMPATechnical Presentation. IMECE2018-89834Amir Mohammadi Nasab, University of Nevada, Reno, Reno,NV, United States, Patrick Stampfli, NevadaNano, Sparks, NV,United States, Aoyi Luo, Kevin Turner, University ofPennsylvania, Philadelphia, PA, United States, Wanliang Shan,University of Nevada Reno, Reno, NV, United States


1:45pm–3:30pm


1:45pm – Effective Property Estimation of CMCMinicomposites Considering PorosityTechnical Paper Publication. IMECE2018-87337Abhilash M. Nagaraja, Suhasini Gururaja, Indian Institute ofScience, Bangalore, Karnataka, India

2:06pm – Phantom-Element Technique for PeriodicDeformation Analysis of Plain Fabrics Using LS-DYNATechnical Paper Publication. IMECE2018-87459Hikaru Miyaki, Atsushi Sakuma, Kyoto Institute ofTechnology, Kyoto, Japan

2:27pm – Evaluation of Transverse Shear Moduli ofComposite Sandwich Beams Through Three-Point BendingTestsTechnical Paper Publication. IMECE2018-87636Ozgun Sener, Oguzhan Dede, Oguz Atalay, Middle EastTechnical University, Ankara, Turkey, Mert Atasoy, ASELSANInc., Ankara, Turkey, Altan Kayran, Middle East TechnicalUniversity, Ankara, Turkey

2:48pm – A Combined CFD-Solid Finite Element Model toStudy the Mechanics of Sand Erosion Damage in CoatedGlass Fiber Reinforced PolymerTechnical Paper Publication. IMECE2018-87966Mohamed Tawfik Eraky, Tarek Elmelegy, Mostafa Shazly,Nabil Eltayeb, British University in Egypt, Cairo, Egypt

3:09pm – Multiscale Simulation of Uni-Directional CarbonFiber Reinforced Polymer CompositesTechnical Presentation. IMECE2018-89956Mahsa Tajdari, Wing Liu, Northwestern University, Evanston,IL, United States


195

12-21 SYMPOSIUM ON MODELING OF THEFRACTURE, FAILURE AND FATIGUE INSOLIDS12-21-2 Fracture Modeling in Engineering MaterialsFourth Floor, David L. Lawrence Convention Center, Room 405

1:45pm–3:30pm

Session Chair: Rui Zhang, University of Texas at Dallas,Richardson, TX, United States

Session Co-Chair: Qingda Yang, University of Miami, CoralGables, FL, United States

1:45pm – 3D Augmented Finite Element Analysis ofCoupled Ply Cracking and Delamination in CurvedComposite LaminatesTechnical Presentation. IMECE2018-89783Qingda Yang, University of Miami, Coral Gables, FL, UnitedStates

2:06pm – Multiscale Fracture Simulation Based on CoupledSpace-Time Finite Element Method and PeridynamicsTechnical Presentation. IMECE2018-89257Rui Zhang, Shogo Wada, Clint Nicely, Qian Qian, Universityof Texas at Dallas, Richardson, TX, United States

2:27pm – Multiscale Virtual Testing and Validation of aDARPA TuFF MaterialTechnical Presentation. IMECE2018-89767Qingda Yang, Garret Nygren, Liang Wang, RyanKarkkainen, University of Miami, Coral Gables, FL, UnitedStates

2:48pm – Numerical Simulation of Lithiation Driven Phase-Change and Fracture in SiliconTechnical Presentation. IMECE2018-89851Ataollah Mesgarnejad, Alain Karma, Northeastern University,Boston, MA, United States

12-29 PERIDYNAMIC MODELING OFMATERIALS—BEHAVIOR12-29-1 Peridynamic Modelling and AnalysisFourth Floor, David L. Lawrence Convention Center, Room 404

1:45pm–3:30pm

Session Chair: Hailong Chen, University of Kentucky,Lexington, KY, United States

Session Co-Chairs: Erdogan Madenci, University of Arizona,Tucson, AZ, United States, Florin Bobaru, University ofNebraska–Lincoln, Lincoln, NE, United States

1:45pm – Study of Spurious Wave Reflection at theInterface of Peridynamics and Finite Element RegionsTechnical Paper Publication. IMECE2018-86129Shank S. Kulkarni, University of North Carolina at Charlotte,Charlotte, NC, United States, Xiaonan Wang, ANSYS,Cannonsburg, PA, United States, Alireza Tabarraei, Universityof North Carolina at Charlotte, Charlotte, NC, United States

2:06pm – Peridynamic Modelling of Crack NucleationTechnical Presentation. IMECE2018-88149Sina Niazi, Florin Bobaru, University of Nebraska–Lincoln,Lincoln, NE, United States

2:27pm – Peridynamics as a Module in the MOOSEFrameworkTechnical Presentation. IMECE2018-89098Hailong Chen, University of Kentucky, Lexington, KY,United States, Benjamin Spencer, Idaho National Laboratory,Idaho Falls, ID, United States

2:48pm – Peridynamic Unit Cell for Effective Properties ofDifferent Microstructure ScalesTechnical Presentation. IMECE2018-89683Erdogan Madenci, University of Arizona, Tucson, AZ, UnitedStates, Atila Barut, Amin Yaghoobi, Global EngineeringResearch and Technologies, Tucson, AZ, United States, Nam Phan, Naval Air Systems Command (NAVAIR), PatuxentRiver, MD, United States

12-31 MECHANICAL METAMATERIALS12-31-4 Reconfigurable Mechanical MetamaterialsFourth Floor, David L. Lawrence Convention Center, Room 401

1:45pm–3:30pm

Session Chair: Jie Yin, Temple University, Haverford, PA,United States

Session Co-Chair: Yaning Li, University of New Hampshire,Durham, NH, United States

1:45pm – The Connection Effect of a Snapology-BasedModular Origami Structure on Its ReconfigurabilityTechnical Presentation. IMECE2018-89119Kai Xiao, Jaehyung Ju, Shanghai Jiao Tong University,Shanghai, China

2:06pm – Design of Reconfigurable Kirigami MetamaterialsTechnical Presentation. IMECE2018-89351Yanbin Li, Yaoye Hong, Temple University, Philadelphia, PA,United States, Jie Yin, Temple University, Haverford, PA,United States

2:27pm – Kirigami-Inspired Materials for TunableMechanical and Adhesive SystemsTechnical Presentation. IMECE2018-89798Doh-Gyu Hwang, Katie Trent, Michael D. Bartlett, Iowa StateUniversity, Ames, IA, United States

2:48pm – Harnessing Multistable Kirigami forReconfigurable Mechanical MetamaterialsTechnical Presentation. IMECE2018-89329Yi Yang, Boston University, Boston, MA, United States,Marcelo Dias, Aarhus University, Aarhus, Denmark, DouglasHolmes, Boston University, Boston, MA, United States


196

3:09pm – Geometric Role in Designing PneumaticallyActuated Pattern-Transforming MetamaterialsTechnical Presentation. IMECE2018-89368Yuzhen Chen, Lihua Jin, University of California, Los Angeles,Los Angeles, CA, United States


3:45pm–5:30pm

Session Chair: Brian Bush, National Institute of Standards andTechnology, Gaithersburg, MD, United States

3:45pm – Rate Dependent Tensile and Shear InteractionsBetween Silicon and EpoxyTechnical Presentation. IMECE2018-89461Tianhao Yang, Rui Huang, Kenneth Liechti, University ofTexas, Austin, TX, United States

4:06pm – Development of Empirical Asperity Contact Modelfor Oil-Lubricated Friction MaterialTechnical Presentation. IMECE2018-88698Hiral Haria, Ford Motor Company, Farmington Hills, MI, UnitedStates, Yuji Fujii, Gregory M. Pietron, Ford Motor Company,Dearborn, MI, United States, Masatoshi Miyagawa, TakahiroTsuchiya, F.C.C. Co., Ltd., Hamamatsu-Shi, Shizuoka-Ken,Japan, Shinji Nakamura, Hiroya Miyoshi, F.C.C. Co., Ltd.,Livonia, MI, United States, Shiyang Hou, Pengchuan Wang,Nikolaos D. Katopodes, University of Michigan, Ann Arbor,MI, United States

4:27pm – Interface-Derived ViscoelasticityTechnical Presentation. IMECE2018-88680Deborah D.L. Chung, University at Buffalo, State University ofNew York, Buffalo, NY, United States

4:48pm – Adhesive Contact of a Weierstrass Surface ProfileTechnical Presentation. IMECE2018-86366Harish Radhakrishnan, Sreekanth Akarapu, ANSYS Inc.,Houston, TX, United States

5:09pm – Experimental and Numerical Study of ContactMechanics of Bolted L-BracketsTechnical Presentation. IMECE2018-87033Samet Emre Yilmaz, FNSS Defence Systems Inc., Ankara,Turkey, Altan Kayran, Ercan Gurses, Demirkan Coker,Middle East Technical University, Ankara, Turkey

12-5 QUANTITATIVE VISUALIZATION OFFRACTURE AND FAILURE12-5-1 Quantitative Visualization Related to Fracture& Crack Growth ProcessesFourth Floor, David L. Lawrence Convention Center, Room 401

3:45pm–5:30pm

Session Chair: Leslie Lamberson, Drexel University,Philadelphia, PA, United States

Session Co-Chairs: Natasha Vermaak, Lehigh University,Bethlehem, PA, United States, Ryan Berke, Utah StateUniversity, Logan, UT, United States, Ali Ghahremaninezhad,University of Miami, Coral Gables, FL, United States

3:45pm – Identifying the Crack Initiation Site inPolycrystalline Nickel Through Surface Profile ChangesUsing Scanning White Light Interferometry (SWLI)Technical Presentation. IMECE2018-87176jalal fathi sola, Haiying Huang, University of Texas atArlington, Arlington, TX, United States

4:06pm – Disappearance of Strengthened Micro Texture ofModified 9Cr-1Mo Steel Caused by Stress-InducedAcceleration of Atomic Diffusion at Elevated TemperaturesTechnical Paper Publication. IMECE2018-87368Yifan Luo, Hideo Miura, Tohoku University, Sendai, Miyagi,Japan

4:27pm – Observation of Cracking and Measurement ofFracture Toughness in GraphiteTechnical Presentation. IMECE2018-87962Cheng Liu, Carl Cady, Bob Stevens, Los Alamos NationalLaboratory, Los Alamos, NM, United States

4:48pm – Crack Tip Fields and Location From Full FieldMolecular Dynamics DataTechnical Presentation. IMECE2018-88897Mark Wilson, Michael Chandross, Scott Grutzik, SandiaNational Laboratories, Albuquerque, NM, United States

5:09pm – Full-Field Quantitative Visualization of ImpactInduced Deformations and Stresses in Ceramics and GlassUsing Digital Gradient SensingTechnical Presentation. IMECE2018-89035Chengyun Miao, Hareesh Tippur, Auburn University, Auburn,AL, United States


197


3:45pm–5:30pm


3:45pm – Multiscale Reduced Order Modeling of Failure inComposites Based on Discrete InterfacesTechnical Presentation. IMECE2018-88984Caglar Oskay, Zimu Su, Berkcan Kapusuzoglu, VanderbiltUniversity, Nashville, TN, United States

4:06pm – Mesoscale Material Strength Characterization forUse in Fracture ModelingTechnical Paper Publication. IMECE2018-88249Katherine A. Acton, University of St. Thomas, St. Paul, MN,United States, Bahador Bahmani, University of Tennessee,Knoxville, Tullahoma, TN, United States, Reza Abedi,University of Tennessee, Tullahoma, TN, United States

4:27pm – Multiscale Characterization of FabricationDefects and Their Effects in Composite StructuresTechnical Presentation. IMECE2018-88541Jim Lua, Global Engineering and Materials, Inc., Kendall Park,NJ, United States, Xiaodong Cui, Ali Sadeghirad, GlobalEngineering and Materials, Inc., Princeton, NJ, United States,Alden Hyde, Ling Liu, Utah State University, Logan, UT, UnitedStates

4:48pm – Nacre-Inspired Architected Interface Leads toStructural Materials With Superior Mechanical PropertiesTechnical Presentation. IMECE2018-89379Grace X. Gu, University of California, Berkeley, Berkeley, CA,United States, Flavia Libonati, Politecnico di Milano/MIT,Cambridge, MA, United States, Daly Wettermark, MarkusBuehler, Massachusetts Institute of Technology, Cambridge,MA, United States

12-21 SYMPOSIUM ON MODELING OF THEFRACTURE, FAILURE AND FATIGUE INSOLIDS12-21-3 Material Model and Fracture TheoryDevelopmentFourth Floor, David L. Lawrence Convention Center, Room 405

3:45pm–5:30pm

Session Chair: Alireza Amirkhizi, University of Massachusetts,Lowell, Lowell, MA, United States

Session Co-Chair: Kazem Alidoost, University of Illinois atUrbana-Champaign, Champaign, IL, United States

3:45pm – Energy Release Rate Approximation for SurfaceCracks in Three-Dimensional Domains Using theTopological DerivativeTechnical Presentation. IMECE2018-89429Kazem Alidoost, University of Illinois at Urbana-Champaign,Champaign, IL, United States, Meng Feng, MassachusettsInstitute of Technology, Cambridge, MA, United States,Philippe Geubelle, Daniel Tortorelli, University of Illinois atUrbana-Champaign, Urbana, IL, United States

4:06pm – A Constitutive Model for Ductile and BrittleFailures of Semicrystalline PolymersTechnical Presentation. IMECE2018-87750Anu Tripathi, Susan Mantell, Jia-Liang Le, University ofMinnesota, Twin Cities, MN, Minneapolis, MN, United States

4:27pm – Failure of Elastomeric Coatings Under CavitationErosionTechnical Presentation. IMECE2018-88401Alireza Amirkhizi, Vahidreza Alizadeh, University ofMassachusetts, Lowell, Lowell, MA, United States

4:48pm – Structural Transitions in Torsionally ConstrainedDNA and Their Dependence on Solution ElectrostaticsTechnical Presentation. IMECE2018-89050Jaspreet Singh, Prashant K. Purohit, University ofPennsylvania, Philadelphia, PA, United States

12-26 MECHANICS OF SOFT MATERIALSAND SOFT ROBOTS12-26-1 Mechanics of Soft Materials and SoftRobotsThird Floor, David L. Lawrence Convention Center, Room 338

3:45pm–5:30pm

Session Chair: Shaoxing Qu, Zhejiang University, Hangzhou,Zhejiang, China

3:45pm – Computational Mechanics Modeling of aContinuum Soft RobotTechnical Presentation. IMECE2018-86141Hongyan Yuan, Bahador Marzban, Richard Sperling,University of Rhode Island, Kingston, RI, United States


198

4:06pm – Numerical Simulation Tools for Data-DrivenStructural Design of Soft RobotsTechnical Presentation. IMECE2018-87679Mohammad Khalid Jawed, Weicheng Huang, University ofCalifornia, Los Angeles, Los Angeles, CA, United States,Xiaonan Huang, Carmel Majidi, Carnegie Mellon University,Pittsburgh, PA, United States

4:27pm – Constitutive Modeling of Property EvolutionDuring Photopolymerization and 3D PrintingTechnical Presentation. IMECE2018-89216Jiangtao Wu, Georgia Institute of Technology, Atlanta, GA,United States, Zeang Zhao, Peking University, Beijing, Beijing,China, H. Jerry Qi, Georgia Institute of Technology, Atlanta,GA, United States, Daining Fang, Beijing Institute ofTechnology, Beijing, Beijing, China

4:48pm – Addictive Manufacturing: From 3D to 4D PrintingInvited Presentation. IMECE2018-89221Daining Fang, Peking University, Beijing, China, Weili Song,Haosen Chen, Beijing Institute of Technology, Beijing, China,Yihui Zhang, Tsinghua University, Beijing, China, H. Jerry Qi,Georgia Institute of Technology, Atlanta, GA, United States

12-29 PERIDYNAMIC MODELING OFMATERIALS? BEHAVIOR12-29-2 Peridynamics for Composites, Fracture, andCorrosion DamageFourth Floor, David L. Lawrence Convention Center, Room 404

3:45pm–5:30pm

Session Chair: Pablo Seleson, Oak Ridge National Laboratory,Oak Ridge, TN, United States

Session Co-Chair: Florin Bobaru, University of Nebraska–Lincoln, Lincoln, NE, United States

3:45pm – Anisotropy in Two-Dimensional and PlaneElasticity Bond-Based PeridynamicsTechnical Presentation. IMECE2018-89977Jeremy Trageser, Pablo Seleson, Oak Ridge NationalLaboratory, Oak Ridge, TN, United States

4:06pm – Dynamic Fracture at an Interface: A PeridynamicAnalysisTechnical Presentation. IMECE2018-86933Javad Mehrmashhadi, Quang Le, Florin Bobaru, Universityof Nebraska–Lincoln, Lincoln, NE, United States

4:27pm – Peridynamic Modeling of Intergranular CorrosionDamageTechnical Presentation. IMECE2018-86728Siavash Jafarzadeh, University of Nebraska–Lincoln, Lincoln,NE, United States, Ziguang Chen, Huazhong University ofScience and Technology, Wuhan, Hubei, China, Florin Bobaru,University of Nebraska–Lincoln, Lincoln, NE, United States

4:48pm – The Peridynamic Coupling of Fracture, Diffusion,and CorrosionTechnical Presentation. IMECE2018-88250Jiangming Zhao, Siavash Jafarzadeh, University ofNebraska–Lincoln, Lincoln, NE, United States, Ziguang Chen,Huazhong University of Science and Technology, Wuhan,Hubei, China, Florin Bobaru, University of Nebraska–Lincoln,Lincoln, NE, United States


199


12-2 3D PRINTED SOFT MATERIALS12-2-1 3D Printing of Novel MaterialsThird Floor, David L. Lawrence Convention Center, Room 333

8:55am–10:40am


8:55am – Multimaterial 3D Printing Toward AdditiveManufacturing Functional Devices ApplicationsTechnical Presentation. IMECE2018-89212H. Jerry Qi, Georgia Institute of Technology, Atlanta, GA,United States

9:37am – Physics and Mechanics in 3D Printing ofAdvanced Functional MaterialsTechnical Presentation. IMECE2018-86275Hyunwoo Yuk, Xuanhe Zhao, Massachusetts Institute ofTechnology, Cambridge, MA, United States

9:58am – Additive Manufacturing of Self-healingElastomersTechnical Presentation. IMECE2018-89815Kun Hao Yu, Qiming Wang, University of Southern California,Los Angeles, CA, United States

9:48am – 3D Printing Soft Conductors Using Liquid MetalsTechnical Presentation. IMECE2018-89916Taylor Neumann, Michael D. Dickey, North Carolina StateUniversity, Raleigh, NC, United States

9:38am – Autonomous Actuation of 3D Printed BistableBeam-Based StructuresTechnical Presentation. IMECE2018-88619Yijie Jiang, Lucia M. Korpas, Jordan R. Raney, University ofPennsylvania, Philadelphia, PA, United States

9:59am – Ferromagnetic 4D Printing of Shape-Programmable Soft Active MatterTechnical Presentation. IMECE2018-87182Yoonho Kim, Hyunwoo Yuk, Ruike Zhao, MassachusettsInstitute of Technology, Cambridge, MA, United States, Shawn Chester, New Jersey Institute of Technology, Newark,NJ, United States, Xuanhe Zhao, Massachusetts Institute ofTechnology, Cambridge, MA, United States

10:20am – Environmentally Responsive Composites Printedby a Multi-Phase 3D PrinterTechnical Presentation. IMECE2018-87376Xiying Li, Jia Ming Zhang, Zhongyi Huang, Pengyu Lv, XinYi, Huiling Duan, Peking University, Beijing, China

12-3 MECHANICAL CHARACTERIZATIONIN EXTREME ENVIRONMENTS12-3-1 Mechanical Characterization in ExtremeEnvironments IThird Floor, David L. Lawrence Convention Center, Room 330

8:55am–10:40am

Session Chair: Owen Kingstedt, University of Utah, Salt LakeCity, UT, United States

Session Co-Chairs: Natasha Vermaak, Lehigh University,Bethlehem, PA, United States, Ryan Berke, Utah StateUniversity, Logan, UT, United States

8:55am – Amorphization in Boron Carbide: Experimentaland Computational StudyInvited Presentation. IMECE2018-89063Ghatu Subhash, Amnaya Awasthi, University of Florida,Gainesville, FL, United States

9:37am – Finite Element Analysis of Thermal ShockResistance of Refractory Ceramic CompositesTechnical Presentation. IMECE2018-87034Kamran Makarian, Villanova University, Ardmore, PA, UnitedStates, Sridhar Santhanam, Villanova University, Collegeville,PA, United States

9:58am – Experimental Evaluation of Effect of Temperatureon Puncture Resistance of Glass Fiber ReinforcedPolyester CompositeTechnical Presentation. IMECE2018-88869Saad Ahmed, Sanjeev Khanna, University of Missouri,Columbia, Columbia, MO, United States

10:19am – High Density Grating Fabrication Techniques forHigh-Temperature Deformation MeasurementTechnical Presentation. IMECE2018-89130Huimin Xie, Wei He, Bozhao Fan, Xianglu Dai, TsinghuaUniversity, Beijing, China

12-14 ANISOTROPIC PLASTICITY OFTEXTURED AND MICROSTRUCTURALLYHETEROGENEOUS MATERIALS12-14-1 Plastic Anisotropy ModelingRoom 331 8:55am–10:40am

Session Chair: H. Eliot Fang, Sandia National Laboratories,Albuquerque, NM, United States

Session Co-Chair: Oana Cazacu, University of Florida,Shalimar, FL, United States

8:55am – Continuum Description of Anisotropic PlasticityBased on Lower ScalesInvited Presentation. IMECE2018-86236Frederic Barlat, POSTECH, Pohang, Gyeongbuk, Korea(Republic)

TRACK 12 MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS – THURSDAY, NOVEMBER 15

200

9:37am – A Quantitative Measure of Yield SurfaceCurvature and Its Effects on Problems in PlasticityTechnical Presentation. IMECE2018-87637William Scherzinger, Sandia National Laboratories,Albuquerque, NM, United States

9:58am – Aspects of Anisotropic Yield Model Form:Calibration and SimulationsTechnical Presentation. IMECE2018-87692Edmundo Corona, William Scherzinger, Sharlotte L.B.Kramer, Amanda Jones, Sandia National Laboratories,Albuquerque, NM, United States

10:19am – Exploration of Anisotropic Plasticity ModelsTechnical Presentation. IMECE2018-89602Jake Ostien, Sandia National Laboratories, Livermore, CA,United States, William Scherzinger, Brian Lester, SandiaNational Laboratories, Albuquerque, NM, United States

12-25 MECHANICS AND DESIGN OFCELLULAR MATERIALS12-25-1 Mechanics and Design of Cellular MaterialsThird Floor, David L. Lawrence Convention Center, Room 335

8:55am–10:40am

Session Chair: Muhammad Ali, Ohio University, Athens, OH,United States

8:55am – A Verified Non-Linear Regression Model forElastic Stiffness Estimates of Finite Composite DomainsConsidering Combined Effects of Volume Fractions,Shapes, Orientations, Locations, and Number of MultipleInclusionsTechnical Paper Publication. IMECE2018-86231Ilige Hage, Notre Dame University-Louaize, Zouk Mosbeh,Lebanon, Charbel Seif, American University of Beirut, Beirut,Lebanon, Remi Hage, Notre Dame University-Louaize, ZoukMosbeh, Lebanon, Ramsey Hamade, American University ofBeirut, Beirut, Riad El Solh, Lebanon

9:16am – Control of Interfacial Crack Behavior via InternalLattices in 3D Printed StructuresTechnical Presentation. IMECE2018-86563Chengyang Mo, Jordan R. Raney, University of Pennsylvania,Philadelphia, PA, United States

9:37am – Study of Energy Absorption Characteristics ofSquare Tube With Composite Cellular CoreTechnical Paper Publication. IMECE2018-86916Muhammad Ali, Eboreime Ohioma, Khairul Alam, OhioUniversity, Athens, OH, United States

9:58am – Effect of Discrete Sectional Bonding of CellularCore on Impact Performance of Square Tubes: A FiniteElement StudyTechnical Paper Publication. IMECE2018-86921Muhammad Ali, Eboreime Ohioma, Khairul Alam, OhioUniversity, Athens, OH, United States

10:19am – Perception Thresholding for Noise Removal inMicrographs of Cellular Tissues Acquired by FluorescenceMicroscopyTechnical Paper Publication. IMECE2018-87231Saad Manzur, Mohammad Shawon, Mahmuda Naznin,Bangladesh University of Engineering & Technology, Dhaka,Dhaka, Bangladesh, Tanvir Faisal, Northwestern University,Chicago, IL, United States


8:55am–10:40am


8:55am – Soft Active Materials, Soft Machines, andMechanicsTechnical Presentation. IMECE2018-89191Shaoxing Qu, Zhejiang University, Hangzhou, Zhejiang, China

9:16am – Adhesive Tough Magnetic Hydrogels With HighMagnetic Nanoparticle ContentTechnical Presentation. IMECE2018-89234Xiaocheng Hu, Guodong Nian, Zhejiang University,Hangzhou, China

9:37am – Monolithic Dual-pH Responsive CopolymerActuator Inspired by DroseraTechnical Presentation. IMECE2018-89398Zilong Han, Zhejiang University, Hangzhou, China

9:58am – Programmable Wrinkling of Shape MemoryPolymers With Applications in Tunable Adhesion andNonuniform Optical GratingsTechnical Presentation. IMECE2018-89526Yu Wang, Houston Methodist Research Institute, Houston, TX,United States, Jianliang Xiao, University of Colorado Boulder,Boulder, CO, United States

10:19am – Tunable Dry Adhesion Through Static andDynamic Stiffness TuningTechnical Presentation. IMECE2018-89968Wanliang Shan, University of Nevada Reno, Reno, NV, UnitedStates, Kevin Turner, University of Pennsylvania, Philadelphia,PA, United States


201

12-27 MULTIFUNCTIONAL AND MICRO-/NANO-STRUCTURED MATERIALS:MODELING AND CHARACTERIZATION12-27-1 Multifunctional and Micro-/NanostructuredMaterials: Modeling and Characterization (I)Third Floor, David L. Lawrence Convention Center, Room 336

8:55am–10:40am

Session Chair: Xin-Lin Gao, Southern Methodist University,Dallas, TX, United States

Session Co-Chair: Haifeng Zhao, Chinese Academy ofSciences, Beijing, China

8:55am – Numerical and Experimental Studies on theDevelopment of Variable Density Nanocomposites forStructural ApplicationsTechnical Paper Publication. IMECE2018-87252Jayaram Pothnis, Indian Institute of Science, Bangalore,Karnataka, India, Dinesh Kalyanasundaram, Indian Institute ofTechnology Delhi, New Delhi, Delhi, India, Suhasini Gururaja,Indian Institute of Science, Bangalore, Karnataka, India

9:16am – A New Method for Solving the Fission GasDiffusion Equation With Time-Varying Diffusion Coefficientand Source Term Considering Recrystallization of FuelGrainsTechnical Presentation. IMECE2018-89576Yunmei Zhao, Shurong Ding, Fudan University, Shanghai,China

9:37am – Mechanical Behavior of MicroscalePolycrystalline Silver PillarsTechnical Presentation. IMECE2018-86623Sadeq Saleh, Carnegie Mellon University, Pittsburgh, PA,United States, Mehdi Hamid, Hussein Zbib, Washington StateUniversity, Pullman, WA, United States, Rahul Panat, CarnegieMellon University, Pittsburgh, PA, United States

9:58am – Nanoscale Mechanical Characterization ofGraphene- and h-BN-Reinforced PMMATechnical Presentation. IMECE2018-89654Arab Hammadi, Zhizhong Dong, Bernard Kear, Rutgers,Piscataway, NJ, United States, Stephen Tse, Rutgers, TheState University of New Jersey, Piscataway, NJ, United States,Assimina Pelegri, Rutgers, The State University of NewJersey, East Brunswick, NJ, United States

12-2 3D PRINTED SOFT MATERIALS12-2-2 Mechanics of 3D Printed MaterialsThird Floor, David L. Lawrence Convention Center, Room 333

10:50am–12:35pm

Session Chair: Kai Yu, University of Colorado Denver, Denver,CO, United States

10:50am – Additive Manufacturing and ArchitectedMaterialsTechnical Presentation. IMECE2018-89696Christopher M. Spadaccini, Lawrence Livermore NationalLaboratory, Livermore, CA, United States

11:32am – Design of Active Smart Materials via AdditiveManufacturing: From Stimuli-Response to Self-HealingTechnical Presentation. IMECE2018-89742Qiming Wang, University of Southern California, Los Angeles,CA, United States

11:53am – 12:14pm – 3D Printing of Electroactive Hydrogelfor Soft Robotic Manipulation and LocomotionTechnical Presentation. IMECE2018-89387Daehoon Han, Cindy Farino, Chen Yang, Tracy Scott,Daniel Browe, Rutgers, The State University of New Jersey,Piscataway, NJ, United States, Wonjoon Choi, KoreaUniversity, Seoul, Korea (Republic), Joseph Freeman, Howon Lee, Rutgers, The State University of New Jersey,Piscataway, NJ, United States

12-3 MECHANICAL CHARACTERIZATIONIN EXTREME ENVIRONMENTS12-3-2 Mechanical Characterization in ExtremeEnvironments IIThird Floor, David L. Lawrence Convention Center, Room 330

10:50am–12:35pm

Session Chair: Ryan Berke, Utah State University, Logan, UT,United States

Session Co-Chairs: Natasha Vermaak, Lehigh University,Bethlehem, PA, United States, Owen Kingstedt, University ofUtah, Salt Lake City, UT, United States

10:50am – Location-Specific Dynamic Response of As-Builtand Heat-Treated Laser Powder Bed Fusion Inconel 718Technical Presentation. IMECE2018-89314Nadia Kouraytem, RaphaÎl Chanut, Ashley Spear, OwenKingstedt, University of Utah, Salt Lake City, UT, United States

11:11am – Experimental and Numerical Analyses ofUniaxial Shakedown Behavior of 316 Stainless SteelTechnical Presentation. IMECE2018-89790Ismail Soner Cinoglu, Ali Charbal, Natasha Vermaak, Lehigh University, Bethlehem, PA, United States

11:32am – Numerical and Experimental Investigations ofMultiaxial Shakedown of Inconel 625 at High TemperatureTechnical Presentation. IMECE2018-89812Ali Charbal, Ismail Soner Cinoglu, Natasha Vermaak, Lehigh University , P


202

11:53am – A Customized UV Lens for In Situ Measurementsat High Temperature and High MagnificationTechnical Presentation. IMECE2018-90028Robert Hansen, Adam Smith, Ren Voie, Ryan Berke, Utah State University, Logan, UT, United States

12:14pm – Effect of Exposure Time on Ultraviolet DIC atExtreme TemperaturesTechnical Presentation. IMECE2018-90029Thinh Thai, Robert Hansen, Adam Smith, Utah StateUniversity, Logan, UT, United States, Paul Gradl, NASA,Huntsville, AL, United States, Ryan Berke, Utah StateUniversity, Logan, UT, United States

12-14 ANISOTROPIC PLASTICITY OFTEXTURED AND MICROSTRUCTURALLYHETEROGENEOUS MATERIALS12-14-2 Multi-Scale Modelling of Plastic AnisotropyThird Floor, David L. Lawrence Convention Center, Room 331

10:50am–12:35pm

Session Chair: William Scherzinger, Sandia NationalLaboratories, Albuquerque, NM, United States

Session Co-Chair: Brian Lester, Sandia National Laboratories,Albuquerque, NM, United States

10:50am – Plastic Anisotropy of Mg Single Crystal: TheEffect of Slip and TwinTechnical Presentation. IMECE2018-86706Soondo Kweon, Daniel Selvakum Raja, Southern IllinoisUniversity Edwardsville, Edwardsville, IL, United States

11:11am – The Relationship Between Average Grain ProfileHeights and Plastic Strains in Nickel Polycrystals UnderTensile Plastic LoadingTechnical Paper Publication. IMECE2018-88197Kranthi Balusu, Haiying Huang, University of Texas atArlington, Arlington, TX, United States

11:32am – Multiscale Modeling of the Plastic Behavior in Single Crystal Tungsten: From Atomistic to CrystalPlasticity SimulationsTechnical Presentation. IMECE2018-87626David Cereceda, Villanova University, Villanova, PA, UnitedStates, Martin Diehl, Franz Roters, Dierk Raabe, Max-Planck-Institut für Eisenforschung, Dusseldorf, Germany, Jose Manuel Perlado, Instituto de Fusion Nuclear, Madrid,Spain, Jaime Marian, University of California, Los Angeles,Los Angeles, CA, United States

11:53am – Plastic Anisotropy in Dynamic Impact Tests of Single- and Polycrystalline TantalumTechnical Presentation. IMECE2018-86499Hojun Lim, Jay Carroll, Corbett Battaile, Sandia NationalLaboratories, Albuquerque, NM, United States, Hyuk JongBong, Korean Institute of Material Science, Changwon, Korea(Republic), Shuh Rong Chen, Los Alamos National Laboratory,Los Alamos, NM, United States, Matthew Lane, SandiaNational Laboratories, Albuquerque, NM, United States

12:14pm – New Polycrystalline Modelling of TexturedSheetsTechnical Presentation. IMECE2018-86079Nitin Chandola, Benoit Revil-Baudard, Oana Cazacu,University of Florida, Shalimar, FL, United States

12-21 SYMPOSIUM ON MODELING OF THEFRACTURE, FAILURE AND FATIGUE INSOLIDS12-21-4 Meso-scale Modeling and Material FractureCharacterizationFourth Floor, David L. Lawrence Convention Center, Room 404

10:50am–12:35pm


Session Co-Chair: Xiaoyao Peng, Carnegie Mellon University,Pittsburgh, PA, United States

10:50am – A Phase Field Model of Dislocation Dynamics inBCC CrystalsTechnical Presentation. IMECE2018-89338Xiaoyao Peng, Carnegie Mellon University, Pittsburgh, PA,United States, Abigail Hunter, Los Alamos NationalLaboratory, Los Alamos, NM, United States, Kaushik Dayal,Carnegie Mellon University, Pittsburgh, PA, United States

11:11am – Phase Field Damage Modeling of MechanicalDegradation in Polymers Under Hydro-ThermomechanicalLoading ConditionsTechnical Presentation. IMECE2018-89456Vinamra Agrawal, Auburn University, Auburn, AL, UnitedStates

11:32am – Quantitative Simulation of Crack Propagation in Single-Phase and Composite Materials by a ModifiedPhase-Field ModelTechnical Presentation. IMECE2018-89051Arezoo Emdadi, Missouri University of Science andTechnology, Rolla, MO, United States, Mohsen Asle Zaeem,Colorado School of Mines, Golden, CO, United States

11:53am – Effective Toughness in Materials With InterfacesTechnical Presentation. IMECE2018-89149Kaushik Vijaykumar, Haneesh Kesari, Brown University,Providence, RI, United States


203

12-25 MECHANICS AND DESIGN OFCELLULAR MATERIALS12-25-2 Mechanics and Design of Cellular MaterialsThird Floor, David L. Lawrence Convention Center, Room 335

10:50am–12:35pm

Session Chair: Muhammad Ali, Ohio University, Athens, OH,United States

10:50am – Investigation of Non-Pneumatic Tires Based onHelical Hexagonal Cellular StructureTechnical Paper Publication. IMECE2018-87631Mihir Mangesh Pewekar, Pranit Sandye, Kiran Chaudhari,Rajiv Gandhi Institute of Technology, Mumbai, Maharashtra,India

11:05am – Behavior of Soft 3D-Printed Auxetic StructuresUnder Various Loading ConditionsTechnical Paper Publication. IMECE2018-87859Mahmoud Ardebili, Erik Chauca, Borough of ManhattanCommunity College/CUNY, New York, NY, United States,Kerim Ikikardaslar, CCNY/CUNY, New York, NY, UnitedStates, Feridun Delale, City College of New York, New York,NY, United States

11:20am – Phase Transitions in a Compressed CNT ForestWith Atomic Layer DepositionTechnical Presentation. IMECE2018-89020Prashant K. Purohit, University of Pennsylvania, Philadelphia,PA, United States

11:35am – Unraveling the Mechanical Behavior ofStochastic Cellular Materials at Intermediate RelativeDensitiesTechnical Presentation. IMECE2018-89528Antonia Antoniou, Georgia Institute of Technology, Atlanta,GA, United States

11:50am – Mechanical Properties of a 3D Cellular StructureWith Semi-Closed CellsTechnical Presentation. IMECE2018-89619Hassan Bahaloo, Northeastern University, Boston, MA, UnitedStates, Masoud Olia, Wentworth Institute of Technology,Boston, MA, United States, Hamid Nayeb Hashemi,Northeastern University, Boston, MA, United States

12:05pm – 3D Printed Reconfigurable Hybrid SquareLattices for Unique Pattern Transformation Under Bi-AxialCompressionTechnical Presentation. IMECE2018-90037Yaning Li, Yunyao Jiang, University of New Hampshire,Durham, NH, United States


10:50am–12:35pm


10:50am – Impact of the Chamber Shape on a Soft ActuatorMechanism to Mimic the Esophageal Swallowing ProcessTechnical Paper Publication. IMECE2018-86592Alberto Caballero Ruiz, Juan Alejandro Hernandez Angulo,Gabriel Ascanio Gasca, Leticia Vega Alvarado, LeopoldoRuiz Huerta, Universidad Nacional Autûnoma de Mèxico,Ciudad de Mèxico, Ciudad de Mèxico, Mexico, EdmundoBrito-de la Fuente, Fresenius Kabi Deutschland GmbH, BadHomburg, Germany

11:11am – Integrated Curvature Sensing of Soft BendingActuators Using Inertial Measurement UnitsTechnical Paper Publication. IMECE2018-87104Arthur Seibel, Lars Schiller, Hamburg University ofTechnology, Hamburg, Germany

11:32am – Chemomechanically Controlled InhomogeneousLarge Deformation of a Bi-Layered Spherical HydrogelTechnical Presentation. IMECE2018-89154Huiming Wang, Zhejiang University, Hangzhou, China

11:53am – Different Mechanical Responses of SoftAdhesion Layer by Partitioning and Initial DefectsTechnical Presentation. IMECE2018-89233Danming Zhong, Zhejiang University, HangZhou, Zhejiang,China

12:14pm – Effects of Defect Size on Cavitation In GelatinTechnical Presentation. IMECE2018-89397Yimou Fu, Zhejiang University, Hangzhou, Zhejiang, China

12-27 MULTIFUNCTIONAL AND MICRO-/NANO-STRUCTURED MATERIALS:MODELING AND CHARACTERIZATION12-27-2 Multifunctional and Micro-/Nano-StructuredMaterials: Modeling and Characterization (II)Third Floor, David L. Lawrence Convention Center, Room 336

10:50am–12:35pm


Session Co-Chair: Vinu Unnikrishnan, University of Alabama,Tuscaloosa, AL, United States

10:50am – Modelling of Fracture Mechanisms at theNanoscale Using the Atomistic J-IntegralInvited Presentation. IMECE2018-89174Samit Roy, Anubhav Roy, University of Alabama, TAL, United States


204

11:32am – Influence of Strain States on the ThermalTransport Properties of Single and Multiwalled CarbonNanostructuresTechnical Paper Publication. IMECE2018-88620Sushan Nakarmi, Vinu Unnikrishnan, University of Alabama,Tuscaloosa, AL, United States

11:53am – Study of Local Interfacial Dielectric Properties inPolymer Nanodielectrics From First PrinciplesTechnical Presentation. IMECE2018-88061Yumeng Li, University of Illinois at Urbana-Champaign,Urbana, IL, United States

12:14pm – Band Gaps for Elastic Wave Propagation in aPeriodic Composite Beam Structure Incorporating SurfaceEnergy, Transverse Shear and Rotational Inertia EffectsTechnical Paper Publication. IMECE2018-87236Robert Gao, Greenhill School, Addison, TX, United States,Gongye Zhang, Tindaro Ioppolo, Southern MethodistUniversity, Dallas, TX, United States

12-41 DYNAMIC FAILURE OF MATERIALSAND STRUCTURES12-41-1 Dynamic Failure of Materials and StructuresThird Floor, David L. Lawrence Convention Center, Room 321

10:50am–12:35pm

Session Chair: L. Roy Xu, University of New Mexico,Albuquerque, NM, United States

10:50am – Combining Nanoindentation Tests andComputational Mechanics to Predict Impact Behavior ofComposite LaminatesTechnical Presentation. IMECE2018-86601L. Roy Xu, University of New Mexico, Albuquerque, NM,United States, Mark Flores, Air Force Research Laboratory,Dayton, OH, United States

11:11am – Full Frontal Impact Comparison of Steel andCarbon Fiber Composite Front Bumper Crush Can (FBCC)StructuresTechnical Paper Publication. IMECE2018-87110Yash Dixit, Paul Begeman, Wayne State University, Detroit,MI, United States, Golam Newaz, Wayne State University, AnnArbor, MI, United States, Derek Board, Ford Motor Company,Dearborn, MI, United States, Yijung Chen, Optimal CAE, Inc.,Plymouth, MI, United States, Omar Faruque, Ford MotorCompany, Dearborn, MI, United States

11:32am – Adhesive Joints Under Impacting Shock WaveLoadingTechnical Paper Publication. IMECE2018-87855Salih Yildiz, Yiannis Andreopoulos, Feridun Delale, City College of New York, New York, NY, United States

11:53am – Comparison of Interfacial and ContinuumModels for Dynamic Fragmentation AnalysisTechnical Paper Publication. IMECE2018-88294Bahador Bahmani, University of Tennessee, Knoxville,Tullahoma, TN, United States, Reza Abedi, University ofTennessee, Tullahoma, TN, United States, Philip L. Clarke,University of Tennessee, Knoxville, Tullahoma, TN, UnitedStates

12-3 MECHANICAL CHARACTERIZATIONIN EXTREME ENVIRONMENTS12-3-3 Mechanical Characterization in ExtremeEnvironments IIIThird Floor, David L. Lawrence Convention Center, Room 330

2:05pm–3:50pm

Session Chair: Natasha Vermaak, Lehigh University,Bethlehem, PA, United States

Session Co-Chairs: Owen Kingstedt, University of Utah, Salt Lake City, UT, United States, Ryan Berke, Utah StateUniversity, Logan, UT, United States

2:05pm – Low Temperature Seawater Effects on theMechanical, Fracture, and Dynamic Behavior of E-Glassand Carbon Fiber LaminatesTechnical Presentation. IMECE2018-90056James LeBlanc, Paul Cavallaro, Jahn Torres, Eric Warner,Andrew Hulton, Ryan Saenger, David Ponte, Naval UnderseaWarfare Center, Newport, RI, United States

2:26pm – Development of a Single Walled Tank UnderCryogenic Conditions Made of CompositeTechnical Paper Publication. IMECE2018-86365Philipp Werner Kutz, Frank Otremba, Jan Werner, ChristianSklorz, Bundesanstalt für Materialforschung und -prüfung,Berlin, Berlin, Germany

2:47pm – Analysis of Temperature Field and Stress Field on Brake Disc During BrakingTechnical Paper Publication. IMECE2018-86767Yu Liu, Xiandong Liu, Yingchun Shan, Tian He, BeihangUniversity, Beijing, China

3:08pm – Material Properties of Hybridized Polymer MatrixComposites at Sub-Ambient TemperaturesTechnical Presentation. IMECE2018-89709Matthew Mordasky, Xuemei Wang, United TechnologiesResearch Center, East Hartford, CT, United States, Paul Cavallaro, Naval Undersea Warfare Center, Newport,RI, United States, Mahmoud M. Salama, JPS CompositeMaterials, Anderson, SC, United States

3:29pm – Mechanical Performance Analysis of ULTEM 9085in a Heated, Irradiated EnvironmentTechnical Paper Publication. IMECE2018-88181Matthew Ng, Pennsylvania State University, State College, PUnited States, Sean Brennan, Pennsylvania State UniversityUniversity Park, PA, United States


205

12-14 ANISOTROPIC PLASTICITY OFTEXTURED AND MICROSTRUCTURALLYHETEROGENEOUS MATERIALS12-14-3 Numerical Modeling With Applications toFormingThird Floor, David L. Lawrence Convention Center, Room 331

2:05pm–3:50pm

Session Chair: Nitin Chandola, University of Florida, Shalimar,FL, United States

Session Co-Chair: Oana Cazacu, University of Florida,Shalimar, FL, United States

2:05pm – Effect of the Ratio Between the Yield Stresses inUniaxial Tension and Pure Shear on the Size of the PlasticZone Near a CrackTechnical Presentation. IMECE2018-86083Benoit Revil-Baudard, Oana Cazacu, Nitin Chandola,University of Florida, Shalimar, FL, United States

2:26pm – Anisotropic Property of Dual-Phase Steel:Measurement and SimulationTechnical Presentation. IMECE2018-89551Xin Wu, Pengyan Lu, Qingyu Yang, Wayne State University,Detroit, MI, United States

2:47pm – Numerical Prediction of the Earing in the CupDrawing of an AA3104 Aluminum Alloy: Process ConditionsVersus Yield CriterionTechnical Presentation. IMECE2018-88998Marta C. Oliveira, Pedro D. Barros, Diogo M. Neto,University of Coimbra, Coimbra, Coimbra, Portugal, Robert E.Dick, Alcoa Technical Center, New Kensington, PA, UnitedStates, Josè L. Alves, University of Minho, Guimarães,Portugal, Luìs F. Menezes, University of Coimbra, Coimbra,Coimbra, Portugal

3:08pm – Plasticity-Damage Couplings in PolycrystallineMaterials: Importance of Consideration of the Specificitiesof the Plastic Flow of the Matrix on the MechanicalResponse of Porous SolidsTechnical Presentation. IMECE2018-86082Benoit Revil-Baudard, Oana Cazacu, University of Florida,Shalimar, FL, United States

12-16 MULTISCALE MODELING ANDEXPERIMENTATION OF GEOMATERIALS12-16-1 Multiscale Modeling and Experimentation ofGeomaterialsThird Floor, David L. Lawrence Convention Center, Room 333

2:05pm–3:50pm

Session Chair: Jesse Sherburn, U.S. Army Engineer Researchand Development Center, Vicksburg, MS, United States

2:05pm – Mesoscale Finite Element Modeling of ConcreteMaterialsTechnical Presentation. IMECE2018-86267William Lawrimore, Jay Shannon, M.Q. Chandler, Charles A.Burchfield, Zackery B. McClelland, R.D. Moser, U.S. ArmyEngineer Research and Development Center, Vicksburg, MS,United States

2:26pm – Multi Scale Modeling of Rubber Friction on theRough Pavements Using Finite Element MethodTechnical Presentation. IMECE2018-87724Ashkan Nazari, Arash Nouri, Saied Taheri, Maryam Shakiba,Sunish Vadakkeveetil, Virginia Tech, Blacksburg, VA, UnitedStates, Mehran Shams Kondori, Virginia Tech, Black, VA,United States

2:47pm – Statistical Volume Elements for theCharacterization of Angle-Dependent Fracture StrengthsTechnical Paper Publication. IMECE2018-88257Justin Garrard, University of Tennessee Space Institute,Tullahoma, TN, United States, Reza Abedi, University ofTennessee, Tullahoma, TN, United States, Philip L. Clarke,University of Tennessee Space Institute, Tullahoma, TN, United States

3:08pm – Evaluation of a Computational Model for Ultra-High Performance Concrete in ShearTechnical Presentation. IMECE2018-89022Andrew Groeneveld, M.Q. Chandler, Robert Walker, C. Kennan Crane, U.S. Army Engineer Research andDevelopment Center, Vicksburg, MS, United States

12-20 MULTISCALE MECHANICS OFDUCTILE FAILURE12-20-1 Multiscale Mechanics of Ductile FailureThird Floor, David L. Lawrence Convention Center, Room 334

2:05pm–3:50pm

Session Chair: Justin Wilkerson, Texas A&M University,College Station, TX, United States

2:05pm – How Plastic Anisotropy Influences DynamicFailure in Magnesium AlloysTechnical Presentation. IMECE2018-89751Jeffrey Lloyd, U.S. Army Research Laboratory, AberdeenProving Ground, MD, United States


206

2:26pm – Multiscale Mechanics of Ductile Damage in HCPMaterialsTechnical Presentation. IMECE2018-89292Padmeya Prashant Indurkar, National University ofSingapore, Singapore, Singapore, Shailendra Joshi, Universityof Houston, Houston, TX, United States

2:47pm – On the Orientation Dependence of IntergranularSpall FailureTechnical Presentation. IMECE2018-89245Justin Wilkerson, Thao Nguyen, Texas A&M University,College Station, TX, United States, Darby Luscher, LosAlamos National Laboratory, Los Alamos, NM, United States

3:08pm – Dynamics of Necking and Ductile Fracture inPorous MetalsTechnical Presentation. IMECE2018-89284Xinzhu Zheng, Texas A&M University, College Station, TX,United States, Komi Espoir N’souglo, University Carlos III ofMadrid, Leganès, Spain, Shmuel Osovski, Technion – IsraeliInstitute of Technology, Haifa, Israel, Jose Rodrìguez-Martìnez, University Carlos III of Madrid, Leganès, Spain,Ankit Srivastava, Texas A&M University, College Station, TX,United States

3:29pm – A Comparative Study of the DynamicFragmentation of Non-Linear Elastic and Elasto-PlasticRingsTechnical Presentation. IMECE2018-89276Alvaro Vaz Romero Santero, Jose Rodrìguez-Martìnez,University Carlos III of Madrid, Leganès, Madrid, Spain,Sèbastien Mercier, Alain Molinari, University of Lorraine,METZ, Lorraine, France

12-21 SYMPOSIUM ON MODELING OF THEFRACTURE, FAILURE AND FATIGUE INSOLIDS12-21-5 Uncertainty Modeling in Fracture andFatigueFourth Floor, David L. Lawrence Convention Center, Room 404

2:05pm–3:50pm

Session Chair: Sevan Goenezen, Texas A&M University,College Station, TX, United States

Session Co-Chair: Bahador Bahmani, University ofTennessee, Knoxville, Tullahoma, TN, United States

2:05pm – Accelerating Hierarchical Materials Discovery andDesign Through a Combined Machine Learning andExperimental FrameworkTechnical Presentation. IMECE2018-89376Grace X. Gu, University of California, Berkeley, Berkeley, CA,United States, Chun-Teh Chen, Deon Richmond, MarkusBuehler, Massachusetts Institute of Technology, Cambridge,MA, United States

2:26pm – Establishing Uncertainty Quantification andPropagation Techniques Within a Process-Structure-Property Framework for Uncertainty Informed MaterialsDesign and DevelopmentTechnical Presentation. IMECE2018-89201Gary Whelan, David L. McDowell, Georgia Institute ofTechnology, Atlanta, GA, United States

2:47pm – An Integrated Approach for Statistical MicroscaleHomogenization to Macroscopic Dynamic FractureAnalysisTechnical Paper Publication. IMECE2018-88429Bahador Bahmani, University of Tennessee, Knoxville,Tullahoma, TN, United States, Ming Yang, Anand Nagarajan,Ohio State University, Columbus, OH, United States, Philip L.Clarke, University of Tennessee, Knoxville, Tullahoma, TN,United States, Soheil Soghrati, Ohio State University, Dublin,OH, United States, Reza Abedi, University of Tennessee,Tullahoma, TN, United States

3:08pm – Utilizing Surface Displacement Fields From aDigital Image Correlation System and Inverse Algorithms toMap the Spatial Distribution of the Shear Modulus in 3DTechnical Presentation. IMECE2018-89889Sevan Goenezen, Texas A&M University, College Station, TX,United States, Yue Mei, Swansea University, Swansea, UnitedKingdom, Ping Luo, Baik Jin Kim, Maulik Kotecha, TexasA&M University, College Station, TX, United States


2:05pm–3:50pm


2:05pm – Programmable Multi-Functional Soft RobotBlends Into the BackgroundTechnical Presentation. IMECE2018-89144Zhanan Zou, Jianliang Xiao, University of Colorado Boulder,Boulder, CO, United States, Kai Yu, University of ColoradoDenver, Denver, CO, United States

2:26pm – Mechanics-Guided Design of Active Material:Hard-Magnetic Soft ActuatorTechnical Presentation. IMECE2018-89291Ruike Zhao, Yoonho Kim, Massachusetts Institute ofTechnology, Cambridge, MA, United States, Shawn Chester,New Jersey Institute of Technology, North Caldwell, NJ, UnitedStates, Xuanhe Zhao, Massachusetts Institute of Technology,Cambridge, MA, United States


207

2:47pm – Soft Electrically Actuated Actuators forUntethered Soft RobotsTechnical Presentation. IMECE2018-89644Xiaonan Huang, Kitty Kumar, Carnegie Mellon University,Pittsburgh, PA, United States, Mohammad Khalid Jawed,University of California, Los Angeles, Los Angeles, CA, UnitedStates, Amir M. Nasab, University of Nevada, Reno, Reno, NV,United States, Zisheng Ye, Carnegie Mellon University,Pittsburgh, PA, United States, Wanliang Shan, University ofNevada Reno, Reno, NV, United States, Carmel Majidi,Carnegie Mellon University, Pittsburgh, PA, United States

3:08pm – A Soft Origami Robot Driven by ElectrostaticForcesTechnical Presentation. IMECE2018-89905Jisen Li, Hareesh Godaba, National University of Singapore,Singapore, Singapore, Zhiqian Zhang, Choon Chiang Foo,Institute of High Performance Computing, Singapore,Singapore, Jian Zhu, National University of Singapore,Singapore, Singapore

3:29pm – A Thermosensitive Chameleon Hydrogel FabricWith Fast Response, Good Reversibility and AdjustableTemperature SensitivityTechnical Presentation. IMECE2018-89273Tonghao Wu, Tenghao Yin, Zhejiang University, Hangzhou,Zhejiang, China

12-27 MULTIFUNCTIONAL AND MICRO-/NANO-STRUCTURED MATERIALS:MODELING AND CHARACTERIZATION12-27-3 Multifunctional and Micro-/Nano-structuredMaterials: Modeling and Characterization (III)Third Floor, David L. Lawrence Convention Center, Room 336

2:05pm–3:50pm


2:05pm – Pave the Path for New Architectured Materials viaMulti-Material 3D PrintingTechnical Presentation. IMECE2018-90036Yaning Li, University of New Hampshire, Durham, NH, UnitedStates

2:26pm – Two Extended Versions of Hill’s Lemma Based onthe Modified Couple Stress TheoryTechnical Presentation. IMECE2018-88198Ahmad Gad, Xin-Lin Gao, Southern Methodist University,Dallas, TX, United States

2:47pm – Mechanically Mediated Asymmetric ThermalTransports in in-Plane HeterostructuresTechnical Presentation. IMECE2018-89065Yuan Gao, Baoxing Xu, University of Virginia, Charlottesville,VA, United States

3:08pm – Average Behavior of Nonlinear Magneto-Electro-Elastic Particulate CompositesTechnical Presentation. IMECE2018-86970You-shu Zhan, Chien-hong Lin, National Cheng KungUniversity, Tainan, Taiwan

3:29pm – A Microstructure-Based Modeling Approach forElectrostriction in Relaxor Ferroelectric PolymersTechnical Presentation. IMECE2018-89912Anil Erol, Paris Von Lockette, Pennsylvania State University,University Park, PA, United States

12-30 SYMPOSIUM ON MULTIPHYICSSIMULATIONS AND EXPERIMENTS FORSOLIDS12-30-1 Symposium on Multiphyics Simulations andExperiments for SolidsThird Floor, David L. Lawrence Convention Center, Room 335

2:05pm–3:50pm

Session Chair: Qian Qian, University of Texas at Dallas,Richardson, TX, United States

2:05pm – Multiscale, Data-Driven Process-Structure-Property Modeling for Additive Manufacturing in Metals:Part 1Technical Presentation. IMECE2018-89263Gregory Wagner, Zhengtao Gan, Yanping Lian, Wing Liu,Northwestern University, Evanston, IL, United States

2:26pm – Multiscale, Data-Driven Process-Structure-Property Modeling for Additive Manufacturing in Metals:Part 2Technical Presentation. IMECE2018-89264Gregory Wagner, Zhengtao Gan, Yanping Lian, Wing Liu,Northwestern University, Evanston, IL, United States

2:47pm – Influence of Lattice Mismatch and NucleationAnisotropy on Inoculating Efficiency at Various CoolingRates: Insights Into Grain Refinement of AdditivelyManufactured MetalsTechnical Presentation. IMECE2018-89455Zhuo Wang, Mississippi State University, Starkville, MS,United States, Yaohong Xiao, Mississippi State University,Mississippi State, MS, United States, Lei Chen, MississippiState University, Starkville, MS, United States

3:08pm – Stress Corrosion Cracking Effects in a RolledHomogeneous Armor Steel AlloyTechnical Presentation. IMECE2018-89636Brian Sprow, Center for Advanced Vehicular Systems,Starkville, MS, United States, Luke Peterson, MississippiState University, Starkville, MS, United States, Lydia Jordan,Center for Advanced Vehicular Systems, Starkville, MS, UnitedStates


208

3:29pm – A Multi-Temporal Scale Approach toThermomechanical Fatigue Failure PredictionTechnical Presentation. IMECE2018-89262Rui Zhang, University of Texas at Dallas, Richardson, TX,United States, Lihua Wen, Northwestern PolytechnicalUniversity, Xi’an, Shaanxi, China, Qian Qian, University ofTexas at Dallas, Richardson, TX, United States

12-41 DYNAMIC FAILURE OF MATERIALSAND STRUCTURES12-41-2 Dynamic Failure of Materials and StructuresThird Floor, David L. Lawrence Convention Center, Room 321

2:05pm–3:50pm

Session Chair: L. Roy Xu, University of New Mexico,Albuquerque, NM, United States

2:05pm – Couple Diffusion-Thermo-Mechanical Model forLife Prediction of a Turbine Engine BladeTechnical Paper Publication. IMECE2018-88461Samir Naboulsi, AFRL - DSRC; Engility, Beavercreek, OH,United States

2:26pm – Modeling of Dynamic Failure of Metals at theAtomic Scales and the MesoscalesTechnical Presentation. IMECE2018-88749Avinash Dongare, University of Connecticut, Storrs, CT,United States

2:47pm – Modeling on Fracture of Core-Shell Structured SiNanoparticles During Charging/Discharging CyclingTechnical Presentation. IMECE2018-89123Xiang Gao, Jun Xu, Chunhao Yuan, Beihang University,Beijing, China

12-14 ANISOTROPIC PLASTICITY OFTEXTURED AND MICROSTRUCTURALLYHETEROGENEOUS MATERIALS12-14-4 Experimental andTheoretical Models forAnisotropic Plasticity and FractureFourth Floor, David L. Lawrence Convention Center, Room 402

4:00pm–5:45pm

Session Chair: Oana Cazacu, University of Florida, Shalimar,FL, United States

Session Co-Chair: H. Eliot Fang, Sandia NationalLaboratories, Albuquerque, NM, United States

4:00pm – Anisotropic Fracture Criterion for MetalsInvited Presentation. IMECE2018-88780Jeong Whan Yoon, KAIST, Daejeon, Korea (Republic)

4:42pm – Theoretical and Numerical Formulation of anEfficient Anisotropic Distortional Hardening ModelTechnical Presentation. IMECE2018-87968Brian Lester, William Scherzinger, Sandia NationalLaboratories, Albuquerque, NM, United States

5:03pm – An Experimental Investigation on the TensileDeformation and Diffuse Necking of an Anisotropic BarTechnical Presentation. IMECE2018-87893Wei Tong, Xu Nie, Southern Methodist University, Dallas, TX,United States, Bo Song, Sandia National Laboratories,Albuquerque, NM, United States

5:24pm – Prediction of Plastic Flow Localization With ShellElement in Thick AHSS SheetsTechnical Presentation. IMECE2018-86535Minsu Wi, JaeHyun Choi, Frederic Barlat, Postech, Pohang,Gyeongbuk, Korea (Republic)

12-16 MULTISCALE MODELING ANDEXPERIMENTATION OF GEOMATERIALS12-16-2 Multiscale Modeling and Experimentation ofGeomaterialsThird Floor, David L. Lawrence Convention Center, Room 333

4:00pm–5:45pm

Session Chair: William Lawrimore, U.S. Army EngineerResearch and Development Center, Vicksburg, MS, UnitedStates

4:00pm – Failure Prediction Using Gibbs Formulation ofGranular MicromechanicsTechnical Presentation. IMECE2018-89206Anil Misra, Rizacan Sarikaya, University of Kansas,Lawrence, KS, United States, Payam Poorsolhjouy, PurdueUniversity, West Lafayette, IN, United States

4:21pm – New Penetration Models for Ballistic ClayIncorporating Strain Hardening, Rate Dependence andTemperature EffectsTechnical Presentation. IMECE2018-89622Yongqiang Li, Xin-Lin Gao, Southern Methodist University,Dallas, TX, United States, Adam Fournier, Program ExecutiveOffice - Soldier, Fort Belvoir, VA, United States, Ricardo Vega,NCI Inc., Fort Belvoir, VA, United States

4:42pm – Modeling of Ultra-High Performance ConcreteFlyer Plate ExperimentsTechnical Presentation. IMECE2018-89898Jesse Sherburn, William F. Heard, U.S. Army EngineerResearch and Development Center, Vicksburg, MS, UnitedStates

5:03pm – Discrete Element Method Simulations of Fracturein ConcreteTechnical Presentation. IMECE2018-89966T.W. Stone, Tyrone McDonald, Bohumir Jelinek, MississippiState University, Starkville, MS, United States


209

12-20 MULTISCALE MECHANICS OFDUCTILE FAILURE12-20-2 Multiscale Mechanics of Ductile FailureThird Floor, David L. Lawrence Convention Center, Room 334

4:00pm–5:45pm

Session Chair: Justin Wilkerson, Texas A&M University,College Station, TX, United States

4:00pm – Modeling the Nucleation, Growth andCoalescence Behavior of Voids During Spall Failure of AlMicrostructures at Mesoscales Using Quasi-Coarse-Grained Dynamics (QCGD) SimulationsTechnical Presentation. IMECE2018-89921Garvit Agarwal, Avinash Dongare, University of Connecticut,Storrs, CT, United States

4:21pm – Dynamic Failure of Nanostructured Metals WithSupersaturated VacanciesTechnical Presentation. IMECE2018-89901Sara Adibi, Texas A&M University, Austin, TX, United States,Justin Wilkerson, Texas A&M University, College Station, TX,United States

4:42pm – Prediction of Strain Rate, Stress State, andTemperature Dependent Plasticity and Damage Evolution in an Aluminum 7085-T711 Alloy Using an Internal StateVariable Based Constitutive ModelTechnical Presentation. IMECE2018-89318Luke Peterson, Mark Horstemeyer, Thomas E. Lacy,Mississippi State University, Starkville, MS, United States

5:03pm – Ductile Fracture of Multiphase Steel SheetsUnder BendingTechnical Presentation. IMECE2018-89304Yu Liu, Ankit Srivastava, Texas A&M University, CollegeStation, TX, United States

5:24pm – Finite-Strain Homogenization Models forViscoplastic Polycrystals Incorporating Void Growth andTexture EvolutionTechnical Presentation. IMECE2018-89409Shuvrangsu Das, Dawei Song, Pedro Ponte Castaòeda,University of Pennsylvania, Philadelphia, PA, United States


4:00pm–5:45pm


4:00pm – Thin Film Electrostatic-Actuator-Based SoftRobotsTechnical Presentation. IMECE2018-89353Congran Jin, Dartmouth College, Hanover, NH, United States,Jinhua Zhang, Xi’an Jiaotong University, Xi’an, Shanxi, China,Shicheng Huang, Ian Trase, Zhe Xu, John X.J. Zhang, ZiChen, Dartmouth College, Hanover, NH, United States

4:21pm – Shape Controllable Soft Bilayer PneumaticActuatorsTechnical Presentation. IMECE2018-89355Yinding Chi, Temple University, Philadelphia, PA, UnitedStates, Jie Yin, Temple University, Haverford, PA, United States

4:42pm – Switchable Adhesion Actuator for AmphibiousClimbing Soft RobotTechnical Presentation. IMECE2018-89443Yichao Tang, Temple University, Philadelphia, PA, UnitedStates, Jie Yin, Temple University, Haverford, PA, United States

5:03pm – Hybrid Liquid Metal-Microelectronics Sensor SkinIntegration for Soft RobotsTechnical Presentation. IMECE2018-89643Tess Hellebrekers, Kadri Bugra Ozutemiz, Jessica Yin,Carmel Majidi, Carnegie Mellon University, Pittsburgh, PA,United States

5:24pm – Bioinspired Design of Thermally-Driven VascularArtificial MuscleTechnical Presentation. IMECE2018-89147Shengqiang Cai, University of California, San Diego, La Jolla,CA, United States


210

12-27 MULTIFUNCTIONAL AND MICRO-/NANO-STRUCTURED MATERIALS:MODELING AND CHARACTERIZATION12-27-4 Multifunctional and Micro-/Nano-structuredMaterials: Modeling and Characterization (IV)Third Floor, David L. Lawrence Convention Center, Room 331

4:00pm–5:45pm


Session Co-Chair: Haifeng Zhao, Chinese Academy ofSciences, Beijing, China

4:00pm – Simulation of Mouse Brain Tissue UnderControlled Coritical ImpactTechnical Paper Publication. IMECE2018-88790Haifeng Zhao, Chinese Academy of Sciences, Beijing, China,Changxin Lai, Shanghai Jiao Tong University, Shanghai, China,Ke Wang, Chinese Academy of Sciences, Beijing, China,Suhao Qiu, Shanghai Jiao Tong University, Shanghai, China,Tianyao Wang, The Fifth People’s Hospital of Shanghai,Shanghai, China, Wenheng Jiang, Soochow University,Shanghai, China, Jun Liu, The Fifth People’s Hospital ofShanghai, Fudan University, Shanghia, China, Xiangdong Li,First Affiliated Hospital of Soochow University, Shanghai,China, Jianfeng Zeng, Soochow University, Suzhou, China,Yuan Feng, Shanghai Jiao Tong University, Shanghai, China

4:21pm – A Finite Element Approach for Study of WaveAttenuation Characteristics of Epoxy Polymer CompositeTechnical Paper Publication. IMECE2018-87873Shank S. Kulkarni, Alireza Tabarraei, Pratik Ghag, Universityof North Carolina at Charlotte, Charlotte, NC, United States

4:42pm – Dynamic Behavior of Cellular Graphene AerogelTechnical Presentation. IMECE2018-89366Zihao Yuan, Haifeng Zhao, Chinese Academy of Sciences,Beijing, China

5:03pm – Computational Modeling of Head Injuries Inducedby Golf Ball ImpactsTechnical Presentation. IMECE2018-87229Yongqiang Li, Xin-Lin Gao, Southern Methodist University,Dallas, TX, United States

12-30 SYMPOSIUM ON MULTIPHYICSSIMULATIONS AND EXPERIMENTS FORSOLIDS12-30-2 Symposium on Multiphyics Simulations andExperiments for SolidsThird Floor, David L. Lawrence Convention Center, Room 335

4:00pm–5:45pm

Session Chair: Rui Zhang, University of Texas at Dallas,Richardson, TX, United States

4:00pm – Modeling the Behavior of HeterogeneousSystems Subjected to the Coupled Effects ofElectromagnetic and Mechanical FieldsTechnical Presentation. IMECE2018-89566Mohamed Elbadry, Michael Steer, Mohammed Zikry, NorthCarolina State University, Raleigh, NC, United States

4:21pm – Modeling Nano-Architected Electrodes WithElastic Instabilities: The Role of Buckling onElectrochemical PerformanceTechnical Presentation. IMECE2018-89238Claudio Di Leo, Arman Afshar, Georgia Institute ofTechnology, Atlanta, GA, United States, Xiaoxing Xia, Julia R.Greer, California Institute of Technology, Pasadena, CA, UnitedStates

4:42pm – Heat Built Up During Dynamic MechanicalAnalysis (DMA) Testing of Rubber SpecimensTechnical Paper Publication. IMECE2018-88627Roja Esmaeeli, University of Akron, Akron, OH, United States,Ashkan Nazari, Virginia Tech, Blacksburg, VA, United States,Haniph Aliniagerdroudbari, Seyed Reza Hashemi, Universityof Akron, Akron, OH, United States, Muapper Alhadri, WaleedZakri, Siamak Farhad, University of Akron, Akron, OH, UnitedStates

5:03pm – Simulating Eddy Current Sensors in Blade TipTiming Application: Modeling and Experimental ValidationTechnical Paper Publication. IMECE2018-87414Nidhal Jamia, Michael I. Friswell, Swansea University, BayCampus, Swansea, United Kingdom, Sami El-Borgi, PrakashRajendran, Texas A&M University at Qatar, Doha, Qatar

5:24pm – Mechanics of non-collagenous interfaces in boneTechnical Presentation. IMECE2018-89438Yang Wang, Seyedreza Mosali, University of Texas at Dallas,Richardson, TX, United States, Zhengwei Dai, JiaxingUniversity, Jiaxing, China, Majid Minary, Qian Qian, Universityof Texas at Dallas, Richardson, TX, United States


211

12-32 HIGH-PERFORMANCENANOSTRUCTURAL MATERIALS ANDNANOCOMPOSITES12-32-1 High-Performance Nanostructural Materialsand NanocompositesThird Floor, David L. Lawrence Convention Center, Room 321

4:00pm–5:45pm

Session Chair: Yuris Dzenis, University of Nebraska, Lincoln,NE, United States

4:00pm – Effect of Graphene on Mechanical Performanceof Pin-Loaded Circular Hole in Laminated CompositesTechnical Paper Publication. IMECE2018-87566Olanrewaju Aluko, University of Michigan-Flint, Flint, MI,United States

4:15pm – Atomistic Simulations of Mechanical Propertiesof Circular and Collapsed Carbon Nanotubes With CovalentCross-LinksTechnical Paper Publication. IMECE2018-88172Alexey Volkov, Arun Thapa, University of Alabama,Tuscaloosa, AL, United States

4:30pm – Learning From Nature: Use Material Architectureto Break the Performance Trade-Offs in Bulk MaterialsTechnical Presentation. IMECE2018-89685Zian Jia, Stonybrook University, Setauket, NY, United States,Yang Yu, Beijing Institute of Technology, Beijing, China,Shaoyu Hou, Lifeng Wang, Stony Brook University, StonyBrook, NY, United States

4:45pm – Effect of Crystallizability on MechanicalProperties of Continuous Polymer NanofibersTechnical Presentation. IMECE2018-89829Yan Zou, Dimitry Papkov, Yuris Dzenis, University ofNebraska–Lincoln, Lincoln, NE, United States

5:00pm – Ultrastrong/Tough Continuous BionanofibersTechnical Presentation. IMECE2018-89847Mohammad Andalib, Yuris Dzenis, University of Nebraska–Lincoln, Lincoln, NE, United States

5:15pm – Incorporating Electrospun Nanofibers IntoStructural High-Temperature NanocompositesTechnical Presentation. IMECE2018-89926Taylor Stockdale, Dimitry Papkov, Mohammad N. Andalib,Yuris Dzenis, University of Nebraska–Lincoln, Lincoln, NE,United States


212

13-1-1: General Topics of MEMS/NEMS

13-2-1: Micro- and Nano-Systems Engineering and Packaging Plenary I

13-2-2: Micro- and Nano-Systems Engineering and Packaging Plenary II

13-3-1: Design and Fabrication, Analysis, Processes, and Technology for Micro andNano Devices and Systems I

12-3-2: Design and Fabrication, Analysis, Processes, and Technology for Micro andNano Devices and Systems II

13-3-3: Design and Fabrication, Analysis, Processes, and Technology for Micro andNano Devices and Systems III

13-4-1: Computational Studies on MEMS and Nanostructures I

13-4-2: Computational Studies on MEMS and Nanostructures II

13-6-1: Micro/Nano Materials and Devices

13-7-1: Applied Mechanics and Materials I

13-7-2: Applied Mechanics and Materials II

13-8-1: Electric Field Driven Microfluidics

13-8-2: Microfluidics in Bioengineering Applications

Track OrganizersIoana Voiculescu, City College of New

York, United States Byoung Hee You, Texas State University-

San Marcos, United States

Topic OrganizersJong Hyun Choi, Purdue University,

United States Namwon Kim, Texas State University,

United StatesAaron Mazzeo, Rutgers, The State

University of New Jersey, UnitedStates

Po-hao Huang, University of Arkansas,United States

Mohammed Mayeed, Kennesaw StateUniversity, United States

Grzegorz (Greg) Hader, U.S. ArmyRDECOM-ARDEC, United States

Ibrahim Alhomoudi, King Abdulaziz Cityfor Science and Tech, Saudi Arabia

Daniel Kaplan, U.S. Army RDECOM-ARDEC, United States

Jungkyu Park, Kennesaw StateUniversity, United States

Ayse Tekes, Kennesaw State University,United States

Sathish Kumar Gurupatham, KennesawState University(formerly SouthernPolytechnic State University), UnitedStates

Tonfiz Mahmood, Zodiac Aerospace,United States

Wei Xue, Rowan University, UnitedStates

Byungki Kim, University ofMassachusetts, United States

Seok Kim, University of Illinois atUrbana-Champaign, United States

Jeong Tae Ok, Midwestern StateUniversity, United States

Ahsan Mian, Wright State University,United States

Awlad Hossain, Eastern WashingtonUniversity, United States

Hongwei Sun, University ofMassachusetts Lowell, United States

Michael Schertzer, Rochester Institute ofTechnology, United States

Mohammad Hossan, University ofCentral Oklahoma, United States

Session OrganizersNamwon Kim, Texas State University,

United StatesKe Du, Rochester Institute of

Technology, United States Mitsuaki Kato, Toshiba Corporation,

JapanZahabul Islam, Pennsylvania State

University, United States Wenbin Yu, Purdue University, United

StatesRyan Pocratsky, Carnegie Mellon

University, United States Nazmul Islam, University of Texas

Rio Grande Valley, United States

TRACK 13 MICRO- AND NANO-SYSTEMSENGINEERING AND PACKAGINGWEDNESDAY, NOVEMBER 14

13-2 PLENARY PRESENTATIONS INMEMS/NEMS ENGINEERING ANDPACKAGING13-2-1 Micro- and Nano-Systems Engineering andPackaging Plenary IThird Floor, David L. Lawrence Convention Center, Room 301

9:00am–9:45am

9:00am – The Role of Arrayed Sensor Systems-on-Chip inNext-Generation MEMS Inertial SensingPlenary Presentation. IMECE2018-90106Gary Fedder, Carnegie Mellon University, Pittsburgh, PA,United States

13-3 DESIGN AND FABRICATION,ANALYSIS, PROCESSES, AND TECHNOLOGYFOR MICRO AND NANO DEVICES ANDSYSTEMS13-3-1 Design and Fabrication, Analysis, Processes,and Technology for Micro and Nano Devices andSystems IFourth Floor, David L. Lawrence Convention Center, Room 406

10:00am–11:45am

Session Chair: Po-hao Huang, University of Arkansas,Fayetteville, AR, United States

10:00am – Rapid Preparation of BiOCl/BiOI for Degradationof Tartrazine and Pharmaceuticals Under Simulated Solarand LED Visible Light IrradiationTechnical Paper Publication. IMECE2018-86913Ukoha Emekwo, Purdue Water Institute/Purdue UniversityNorthwest, Hammond, IN, United States, A. G. Agwu Nnanna,University of Texas of the Permian Basin, Odessa, TX, UnitedStates, John D. Vargo, Nicholas Baumhover, State HygienicLaboratory at the University of Iowa, Coralville, IA, UnitedStates

10:21am – Micro-Mechanical Punching by a Double-SidedHot Embossing ProcessTechnical Presentation. IMECE2018-89096Devanda Lek, Joseph Miller, In-Hyouk Song, Texas StateUniversity, San Marcos, TX, United States, Du Hwan Chun,Yeungnam University, Gyongsan, Korea (Republic), ByoungHee You, Texas State University, San Marcos, TX, UnitedStates

10:42am – Strain-Amplifiying Cellular Microstructure forFlexible Piezo-Powered ActuatorTechnical Presentation. IMECE2018-89556E.J. Carron, R. Valery Roy, University of Delaware, Newark,DE, United States

11:03am – Fabrication of Hair-Like Surface Nanostructureson Elastomeric Films for Highly Sensitive ResistivePressure sensorsTechnical Presentation. IMECE2018-89934Kwanoh Kim, Eunju Yeo, Minhee Son, Jae Sung Yoon,Yeong-Eun Yoo, Jeong Hwan Kim, Doo-Sun Choi, KoreaInstitute of Machinery and Materials, Daejeon, Korea (Republic)

11:24am – Progress in Process Development of TantalumThin Film as a Micro-/Nanoscale Structural MaterialTechnical Presentation. IMECE2018-89952Longchang Ni, Ryan Pocratsky, Maarten De Boer, CarnegieMellon University, Pittsburgh, PA, United States

13-3 DESIGN AND FABRICATION,ANALYSIS, PROCESSES, AND TECHNOLOGYFOR MICRO AND NANO DEVICES ANDSYSTEMS13-3-2 Design and Fabrication, Analysis, Processes,and Technology for Micro and Nano Devices andSystems IIFourth Floor, David L. Lawrence Convention Center, Room 406

1:45pm–3:30pm

Session Chair: Byoung Hee You, Texas State University, SanMarcos, TX, United States

1:45pm – Methods of Mass-Flow Characterization of Water-Glycol Mixtures Through Micro-/Nano-ChannelsTechnical Paper Publication. IMECE2018-87928John B. Lee, Po-hao Huang, University of Arkansas,Fayetteville, AR, United States

2:06pm – Design and Fabrication of a Microfluidic Modulefor Solid Phase Extraction of Nucleic Acids and AffinitySelection of ExosomesTechnical Presentation. IMECE2018-88293Daniel Park, Louisiana State University, Baton Rouge, LA,United States, J.M. Jackson, C.D.M. Campos, S.A. Soper,University of Kansas, Lawrence, KS, United States, MichaelMurphy, Louisiana State University, Baton Rouge, LA, UnitedStates

2:27pm – Fabrication of Optically Transparent,Superhydrophobic Films on Plastic Surfaces FromRaspberry-Shaped ParticlesTechnical Presentation. IMECE2018-88462Xiaoxiao Zhao, Daniel Park, Michael Murphy, LouisianaState University, Baton Rouge, LA, United States

2:48pm – Wormlike Micellar Solutions Passing Through aSudden Contraction MicrochannelTechnical Presentation. IMECE2018-89345Emad Jafari Nodoushan, Texas State University, San Marcos,TX, United States, Taeil Yi, Kyungnam University, Changwon,Gyeongsangnam-do, Korea (Republic), Young Ju Lee,Namwon Kim, Texas State University, San Marcos, TX, UnitedStates

TRACK 13 MICRO- AND NANO-SYSTEMS ENGINEERING AND PACKAGING – WEDNESDAY, NOVEMBER 14

213

3:09pm – Demonstrating the Potential of a Hybrid Model toIncrease the 360 Degrees Rotational Motion Freedom ofIronless Permanent Magnet Planar MotorsTechnical Paper Publication. IMECE2018-87007Ding Yuan, Ming Zhang, Yu Zhu, Xin Li, Leijie Wang,Tsinghua University, Beijing, China

13-4 COMPUTATIONAL STUDIES ON MEMSAND NANOSTRUCTURES13-4-1 Computational Studies on MEMS andNanostructures IFourth Floor, David L. Lawrence Convention Center, Room 406

3:45pm–5:30pm

Session Chair: Grzegorz (Greg) Hader, U.S. Army RDECOM-ARDEC, Picatinny Arsenal, NJ, United States

3:45pm – Effect of Polydispersity on the Morphology ofP3HT:PCBM Organic Solar Cells by Coarse-GrainedMolecular SimulationsTechnical Presentation. IMECE2018-86439Joydeep Munshi, Lehigh University, Bethlehem, PA, UnitedStates, Wei Chen, Northwestern University, Evanston, IL,United States, TeYu Chien, University of Wyoming, Laramie,WY, United States, Ganesh Balasubramanian, LehighUniversity, Bethlehem, PA, United States

4:06pm – Electrostatic Doping Based GrapheneNanoribbon Tunneling Transistor: A Simulation StudyTechnical Presentation. IMECE2018-86608Weixiang Zhang, University at Buffalo, State University of New York, Buffalo, NY, United States, Tarek Ragab, ArkansasState University, State University, AR, United States, CemalBasaran, University at Buffalo, State University of New York,Buffalo, NY, United States

4:27pm – Biomimetic Membrane Simulation for WaterDesalinationTechnical Paper Publication. IMECE2018-86664Peter Oviroh, Rokhsareh Akbarzadeh, Tien-Chien Jen,University of Johannesburg, Johannesburg, South Africa

4:48pm – Multiscale Modeling of PEEK Using ReactiveMolecular Dynamics Modeling and MicromechanicsTechnical Presentation. IMECE2018-88935Will Pisani, Matthew Radue, Michigan TechnologicalUniversity, Houghton, MI, United States, SorayotChinkanjanarot, National Metals and Materials TechnologyCenter, Khlong Nueng, Pathum Thani, Thailand, Brett A.Bednarcyk, Evan Pineda, NASA Glenn Research Center,Cleveland, OH, United States, Kevin Waters, RavindraPandey, Julie King, Gregory Odegard, MichiganTechnological University, Houghton, MI, United States


13-2 PLENARY PRESENTATIONS INMEMS/NEMS ENGINEERING ANDPACKAGING13-2-2 Micro- and Nano-Systems Engineering andPackaging Plenary IIThird Floor, David L. Lawrence Convention Center, Room 303

8:00am–8:45am

8:00am – 2D Materials, Flexible Electrodes and SurfacesPlenary Presentation. IMECE2018-90107Eui-Hyeok Yang, Stevens Institute of Technology, Hoboken,NJ, United States

13-1 GENERAL TOPICS OF MEMS/NEMS13-1-1 General Topics of MEMS/NEMSRoom 338 8:55am–10:40am

Session Chair: Jong Hyun Choi, Purdue University, WestLafayette, IN, United States

8:55am – Experimental and Thermal Investigation of FlowBehavior in Mini Channel Heat SinkTechnical Presentation. IMECE2018-88924Harshit M. Trivedi, ITM Universe, Vadodara, Gujarat, India

9:16am – Preliminary Exploration of Cell-Based SAWDetection for Water ToxicityTechnical Paper Publication. IMECE2018-86436Kun-Lin Lee, City College of New York, New York, NY, UnitedStates, Fang Li, New York Institute of Technology, New York,NY, United States, Anis Nurashikin Nordin, InternationalIslamic University Malaysia, Kuala Lumpur, Malaysia, IoanaVoiculescu, City College of New York, New York, NY, UnitedStates

9:37am – Mechanical Properties of 3D Printed MetalsTechnical Paper Publication. IMECE2018-86310Seyed Allameh, Northern Kentucky University, Newport, KY,United States, Bailey Leininger, Brianna Harbin, NorthernKentucky University, Highland Heights, KY, United States

9:58am – Additively Manufactured Sensors and HeatExchangers for Gas Flow Using Novel Binder JetProcessingTechnical Presentation. IMECE2018-89570Xiaolu Huang, Truong Do, Tyler J. Bauder, Hawke Suen,Patrick Kwon, Junghoon Yeom, Michigan State University,East Lansing, MI, United States

TRACK 13 MICRO- AND NANO-SYSTEMS ENGINEERING AND PACKAGING – WEDNESDAY, NOVEMBER 14 / THURSDAY, NOVEMBER 15

214

13-4 COMPUTATIONAL STUDIES ON MEMSAND NANOSTRUCTURES13-4-2 Computational Studies on MEMS andNanostructures IIFourth Floor, David L. Lawrence Convention Center, Room 401

10:50am–12:35pm

Session Chair: Grzegorz (Greg) Hader, U.S. Army RDECOM-ARDEC, Picatinny Arsenal, NJ, United States

10:50am – Micro-Cantilever Beam Battery for Measurementof Viscosity in Extremely Small Volumes of FluidInvited Presentation. IMECE2018-86522Amin Changizi, Intelliquip, Breinigsville, PA, United States, M. Amin Changizi, Intelliquip, Bethlehem, PA, United States,Ion Stiharu, Concordia University, Montreal, Canada

11:32am – Simulation of Fluid Flow in a Microchannel atLow Reynolds Number Using Dissipative Particle DynamicsTechnical Paper Publication. IMECE2018-87622Waqas Waheed, Khalifa University, Abu Dhabi, United ArabEmir., Anas Alazzam, Khalifa University of Science,Technology & Research, Abu Dhabi, United Arab Emir., AshrafAl-Khateeb, Eiyad Abu-Nada, Khalifa University, Abu Dhabi,United Arab Emir.

11:53am – Capillary-Controlled Thermal Diode inHeterogeneous Nanoporous StructuresTechnical Presentation. IMECE2018-89713Tadeh Avanessian, Gisuk Hwang, Evan Boutz, Wichita StateUniversity, Wichita, KS, United States

13-6 MICRO AND NANO DEVICES13-6-1 Micro/Nano Materials and DevicesThird Floor, David L. Lawrence Convention Center, Room 338

10:50am–12:35pm

Session Chair: Ke Du, Rochester Institute of Technology,Rochester, NY, United States

10:50am – The Relationship Between Young’s Modulus andthe Dry Etching Rate of Polydimethylsiloxane (PDMS)Technical Presentation. IMECE2018-89760Matthew Fitzgerald, Sara Tsai, Yang Zhao, Deyu Li,Vanderbilt University, Nashville, TN, United States

11:11am – A Scalabale Microfluidic Device for Switching of Microparticles Using DielectrophoresisTechnical Paper Publication. IMECE2018-87664Waqas Waheed, Khalifa University, Abu Dhabi, United ArabEmir., Anas Alazzam, Khalifa University of Science,Technology & Research, Abu Dhabi, United Arab Emir.,Bobby Mathew, UAE University, Al Ain, Abu Dhabi, UnitedArab Emir., Eiyad Abu-Nada, Ashraf Al-Khateeb, Khalifa University, Abu Dhabi, United Arab Emir.

11:32am – Photosensitivity of Monolayer Graphene-BaseField Effect TransistorTechnical Paper Publication. IMECE2018-87245Jowes H. Goundar, Tohoku University, Sendai, Japan,Ken Suzuki, Hideo Miura, Tohoku University, Sendai, Miyagi,Japan

11:53am – Atomically-Precise Graphene Etch Masks for 3DIntegrated Systems From 2D Material HeterostructuresTechnical Presentation. IMECE2018-87721Jangyup Son, University of Illinois at Urbana-Champaign,Urbana, IL, United States, Junyoung Kwon, YonseiUniversity, Seoul, Korea (Republic), SunPhil Kim, Yinchun Lv,Jaehyung Yu, University of Illinois at Urbana-Champaign,Urbana, IL, United States, Jong-Young Lee, Huije Ryu, YonseiUniversity, Seoul, Korea (Republic), Kenji Watanabe, TakashiTaniguchi, National Institute for Materials Science, Namiki,Japan, Rita Garrido-Menacho, Nadya Mason, Elif Ertekin,Pinshane Huang, University of Illinois at Urbana-Champaign,Urbana, IL, United States, Gwan-Hyoung Lee, YonseiUniversity, Seoul, Korea (Republic), Arend van der Zande,University of Illinois at Urbana-Champaign, Urbana, IL, UnitedStates

13-7 APPLIED MECHANICS ANDMATERIALS IN MICRO- AND NANO-SYSTEMS13-7-1 Applied Mechanics and Materials IThird Floor, David L. Lawrence Convention Center, Room 338

2:05pm–3:50pm

Session Chair: Mitsuaki Kato, Toshiba Corporation, Kawasaki-Shi, Japan

Session Co-Chair: Zahabul Islam, Pennsylvania StateUniversity, State College, PA, United States

2:05pm – Investigation of Moisture Damage Behavior ofWarm-Mix Asphalt (WMA) With Chemical WMA AdditivesTowards Repeated Load-Deformation AnalysisTechnical Paper Publication. IMECE2018-86273Biswajit Bairgi, Rafiqul A. Tarefder, University of NewMexico, Albuquerque, NM, United States

2:26pm – Strain Induced Grain Growth and LowTemperature Annealing of Palladium Thin FilmTechnical Presentation. IMECE2018-86352Zahabul Islam, Pennsylvania State University, State College,PA, United States, Md. Haque, Pennsylvania State University,University Park, PA, United States

2:47pm – Evaluation Method for Performance of SiC PowerModule by Electro-Thermal-Anisotropic Stress CoupledAnalysisTechnical Paper Publication. IMECE2018-86626Mitsuaki Kato, Akihiro Goryu, Akira Kano, Kazuto Takao,Kenji Hirohata, Toshiba Corporation, Kawasaki, Japan,Satoshi Izumi, University of Tokyo, Bunkyo-ku, Japan

TRACK 13 MICRO- AND NANO-SYSTEMS ENGINEERING AND PACKAGING – THURSDAY, NOVEMBER 15

215

3:08pm – Levy’s Solution for Strain Gradient Plates UnderTransverse Loading: Nonlocal Boundary Value ProblemsTechnical Presentation. IMECE2018-89427Bishweshwar Babu, B.P. Patel, Indian Institute of TechnologyDelhi, New Delhi, Delhi, India

3:29pm – Natural Fibrous Catcher of LiquidTechnical Presentation. IMECE2018-89514Moxiao Li, Tianjian Lu, Xi’an Jiaotong University, Xi’an, China,Feng Xu, Xi’an Jiaotong University/China, Shaanxi, China

13-8 MICROFLUIDICS IN MICRO- ANDNANOSYSTEMS13-8-1 Electric Field Driven MicrofluidicsFourth Floor, David L. Lawrence Convention Center, Room 405

2:05pm–3:50pm

Session Chair: Nazmul Islam, University of Texas Rio GrandeValley, Edinburg, TX, United States

2:05pm – Viscoelectric Effect on the Electroosmotic Flow in Nanochannels With Heterogeneous Zeta PotentialsTechnical Paper Publication. IMECE2018-86384Edson M. Jimenez, Universidad Nacional Autûnoma deMexico, Ciudad de Mexico, Mexico, Juan P. Escandon,Instituto Politecnico Nacional, SEPI-ESIME UnidadAzcapotzalco, Cuidad de Mexico, Mexico, Federico Mèndez,Universidad Nacional Autûnoma de Mexico, Ciudad de Mexico,Mexico

2:26pm – Improving the Micropump Velocity for OrthogonalElectrode PatternTechnical Paper Publication. IMECE2018-88629Nazmul Islam, Rakesh Guduru, Chu-Wen Cheng, Universityof Texas Rio Grande Valley, Edinburg, TX, United States

2:47pm – Knudsen Pump Powered Micro-HovercraftsTechnical Presentation. IMECE2018-89552John Cortes, Christopher Stanczak, Igor Bargatin,University of Pennsylvania, Philadelphia, PA, United States

3:08pm – Analysis of AC Electrokinetic Flow With MultipleElectrodes by Direct Measurement of Velocity FieldsTechnical Presentation. IMECE2018-89803Tharun Srinivas Karnam Reddy, Choongbae Park, TexasA&M University–Kingsville, Kingsville, TX, United States

3:29pm – Magnetic Antibody Functionalized CarbonNanotube Ink for Rapid Printing of BiosensorsTechnical Presentation. IMECE2018-89666Sarah Mishriki, Abdel Rahman Abdel Fattah, Ahmed M.Abdalla, Elvira Meleca, Fei Geng, Suvojit Ghosh, Ishwar K.Puri, McMaster University, Hamilton, ON, Canada

13-3 DESIGN AND FABRICATION,ANALYSIS, PROCESSES, AND TECHNOLOGYFOR MICRO AND NANO DEVICES ANDSYSTEMS13-3-3 Design and Fabrication, Analysis, Processes,and Technology for Micro and Nano Devices andSystems IIIThird Floor, David L. Lawrence Convention Center, Room 338

4:00pm–5:45pm

Session Chair: Namwon Kim, Texas State University, San Marcos, TX, United States

4:00pm – Design and Analysis of Electrostatically ActuatedMechanical Sensor for GrapheneTechnical Paper Publication. IMECE2018-86407Ayse Tekes, Jungkyu Park, Kennesaw State University,Marietta, GA, United States

4:21pm – Mechanical, Electrical and Electro-MechanicalProperties of CNTs/Carbon Black/ SEBS-Based TPENanocomposites for Large Deformation SensorApplicationsTechnical Presentation. IMECE2018-86460Xudong Yang, Lingyu Sun, Cheng Zhang, Bincheng Huang,Beihang University, Beijing, China

4:42pm – 3D Numerical Model for Prediction of PercolationThreshold and Piezoresistive Characteristics of ConductivePolymer Filled With CNTTechnical Paper Publication. IMECE2018-86528Jun Han, Lingyu Sun, Lijun Li, Beihang University, Beijing,China, Taikun Wang, Henan Key Laboratory of UnderwaterIntelligent Equipment, Zhengzhou ElectromechanicalEngineering, Zhengzhou, China, Bincheng Huang, XudongYang, Beihang University, Beijing, China

5:03pm – Area-Arrayed Graphene Nano-Ribbon-Base StrainSensorTechnical Paper Publication. IMECE2018-87277Ryohei Nakagawa, Zhi Wang, Ken Suzuki, Tohoku University,Sendai, Miyagi, Japan

5:24pm – Theoretical Study of Electronic Band Structure ofDumbbell-Shape Graphene Nanoribbons for Highly-Sensitive Strain SensorsTechnical Paper Publication. IMECE2018-88431Qinqiang Zhang, Takuya Kudo, Ken Suzuki, TohokuUniversity, Sendai, Miyagi, Japan


216

13-7 APPLIED MECHANICS ANDMATERIALS IN MICRO- AND NANO-SYSTEMS13-7-2 Applied Mechanics and Materials IIFourth Floor, David L. Lawrence Convention Center, Room 405

4:00pm–5:45pm

Session Chair: Wenbin Yu, Purdue University, West Lafayette,IN, United States

Session Co-Chair: Ryan Pocratsky, Carnegie MellonUniversity, Pittsburgh, PA, United States

4:00pm – Development of a Flexible Tactile Sensor UsingArea-Arrayed Bundle Structures of Multi-Walled CarbonNanotubesTechnical Paper Publication. IMECE2018-87275Ryusaku Osada, Ken Suzuki, Tohoku University, Sendai,Miyagi, Japan

4:21pm – Negative Poisson’s Ratio in Two-DimensionalHoneycomb StructuresTechnical Presentation. IMECE2018-89006Guangzhao Qin, University of South Carolina, Columbia, SC,United States, Zhenzhen Qin, Zhengzhou University,Zhengzhou, Henan, China

4:42pm – Multiscale Analysis of Multilayer Printed CircuitBoard Using Mechanics of Structure GenomeTechnical Presentation. IMECE2018-89326Fei Tao, Wenbin Yu, Purdue University, West Lafayette, IN,United States

5:03pm – A Test Chamber for Characterizing the Thermo-Mechanical Properties of Thin Films Under HarshConditionsTechnical Presentation. IMECE2018-89764Ryan Pocratsky, Longchang Ni, Prince Singh, Maarten DeBoer, Carnegie Mellon University, Pittsburgh, PA, United States

13-8 MICROFLUIDICS IN MICRO- ANDNANOSYSTEMS13-8-2 Microfluidics in Bioengineering ApplicationsThird Floor, David L. Lawrence Convention Center, Room 336

4:00pm–5:45pm

Session Chair: Mohammad Hossan, University of CentralOklahoma, Edmond, OK, United States

4:00pm – Capillary Force Driven Single-Cell SpikingApparatus for Studying Circulating Tumor CellsTechnical Paper Publication. IMECE2018-87109Jacob Amontree, Kangfu Chen, Jose Varillas, Z. Hugh Fan,University of Florida, Gainesville, FL, United States

4:21pm – The Development and Characterization of a“Store and Create” Microfluidic Device to Study IceNucleation ParticlesTechnical Presentation. IMECE2018-89479Thomas Brubaker, Carnegie Mellon University, Pittsburgh, PA, United States, Michael Polen, McDaniel College,Pittsburgh, PA, United States, Leif Jahn, Perry Cheng, Vinay Ekambaram, Shelley Anna, Ryan Sullivan, CarnegieMellon University, Pittsburgh, PA, United States

4:42pm – Deformable Shallow Microfluidics: Physics of theFluid Flow and Novel Particle Manipulation Platform forFiltration, Isolation, and Controlled ReleaseTechnical Presentation. IMECE2018-89655Aryan Mehboudi, Junghoon Yeom, Michigan State University,East Lansing, MI, United States

5:03pm – A Novel Microfluidic Device for High-ThroughputImmobilization and Mechanostimulation of SmallMulticellular OrganismsTechnical Presentation. IMECE2018-89718Utku Sonmez, Ardon Z. Shorr, John S. Minden, Philip R.LeDuc, Carnegie Mellon University, Pittsburgh, PA, UnitedStates

5:24pm – The Effect of Electric Field on Cell FunctionsDuring DC Dielectrophoretic Cell ManipulationTechnical Presentation. IMECE2018-86949Mohammad Hossan, Nicholas Walker, Melville Vaughan,Amalie L. Moyna, University of Central Oklahoma, Edmond,OK, United States


217

NOTES

218

Track OrganizersZahra Sotoudeh, Cal Poly Pomona, United States

Eleonora Tubaldi, University of Arizona, United States

Topic OrganizerEleonora Tubaldi, University of Arizona, United States

TRACK 14 ASME INTERNATIONALUNDERGRADUATE RESEARCH AND DESIGNEXPO (POSTERS ONLY)SUNDAY, NOVEMBER 11

14-1 GENERAL14-1-1Exhibit Hall B 5:30pm–7:00pm

1. Effects of Forced Upstream Flow Fluctuations on VortexShedding Intensity in a Normal Triangular Tube ArrayUndergrad Expo. IMECE2018-88557Kazybek Kassym, Aida Iskaliyeva, Luis Rojas-Solorzano,Nazarbayev University, Astana, Astana, Kazakhstan

2. Design, Analysis and Realization of a Novel CompliantBistable MechanismUndergrad Expo. IMECE2018-88896Hongkuan Lin, Niko Giannakakos, Ayse Tekes, KennesawState University, Marietta, GA, United States

3. Take Home Lab Equipment Design to Study FreeResponse of Single DOF and 2 DOF Vibratory MechanismsUndergrad Expo. IMECE2018-88906Zach Marr, Michael Weitzel, Ayse Tekes, Julia Ortiz,Kennesaw State University, Marietta, GA, United States

4. Design and Analysis of a Novel Semi CompliantSwashplate MechanismUndergrad Expo. IMECE2018-88927Niko Giannakakos, Ayse Tekes, Adeel Khalid, KennesawState University, Marietta, GA, United States

5. Design, Analysis, Modeling and Experimental Validationof Compliant Five Bar MechanismUndergrad Expo. IMECE2018-89085Michael Weitzel, Ayse Tekes, Kennesaw State University,Marietta, GA, United States

6. Design and Experimental Validation of a LargeDisplacement Compliant Folded Beam MechanismUndergrad Expo. IMECE2018-89150Hunter Horner, Sergio Canchola, Cody Delarosa, AyseTekes, Kennesaw State University, Marietta, GA, United States

7. Engineering Graphene-Based Membranes forElectromechanical SensorsUndergrad Expo. IMECE2018-89195Owen D. Pearl, Adam N. Brock, Quang N. Tran,Gordon B. Walbert, Owen D. Papa, Dmitriy A. Dikin, Temple University, Philadelphia, PA, United States

8. Effect of Microfluidic Boundary Conditions on FlowTopology OptimizationUndergrad Expo. IMECE2018-89434Gabriel Garneau, Matthew Owen, Georg Pingen, UnionUniversity, Jackson, TN, United States, Kurt Maute, Universityof Colorodo Boulder, Boulder, CO, United States

9. Flow Over a Smooth Sphere, Sphere With Dimples andSphere With Double DimplesUndergrad Expo. IMECE2018-89440Andreina De La Cruz, Kinnari Shah, LaGuardia CommunityCollege-CUNY, Long Island City, NY, United States

10. Design of a 3D Printed Modular RobotUndergrad Expo. IMECE2018-89445Mark Bedillion, Carnegie Mellon University, Gibsonia, PA,United States, Xuan Chen, Jason Liu, Carnegie MellonUniversity, Pittsburgh, PA, United States

11. Developing Methods for Measuring Thermal Propertiesof Polyimide SubstratesUndergrad Expo. IMECE2018-89472Carlos Vargas Venegas, Pennsylvania State University, StateCollege, PA, United States, Shawn Siroka, Pennsylvana StateUniversity, West Hazleton, PA, United States, Reid A.Berdanier, Pennsylvania State University, State College, PA,United States

12. Using Surface Wave Elastography to InvestigateAchilles Tendon StiffnessUndergrad Expo. IMECE2018-89536Alan Palmer, Kennesaw State University, Canton, GA, UnitedStates

13. Design and Fabrication of a UAV Protection SystemUndergrad Expo. IMECE2018-89577Renato Rodriguez, Joseph Franke, Sijan Shrestha, Anthony Nguyen, Matthew Bishop, Robert Gallo, DamoonSoudbakhsh, George Mason University, Fairfax, VA, UnitedStates

14. High Temperature Digital Image Correlation forPropulsion Materials TestingUndergrad Expo. IMECE2018-89593John Kershner, Natasha Bradley, Michael Walock, Anindya Ghoshal, Muthuvel Murugan, U.S. Army ResearchLaboratory, Aberdeen Proving Ground, MD, United States

15. Three-Dimensional Voxel-Based Finite Element Analysisof Dental ImplantsUndergrad Expo. IMECE2018-89620Kayla Reigh, Kangning Su, Pennsylvania State University,State College, PA, United States, Qiyuan Mao, ChangzhouInstitute of Light Industry, Changzhou, China, Mehran H.Zadeh, Temple University, Philadelphia, PA, United States,Greg Lewis, Pennsylvania State College of Medicine and M.S.Hershey Medical Center, Hershey, PA, United States, Jing Du,Pennsylvania State University, State College, PA, United States

16. Sponge Material Made of Reduced Graphene Oxide:Synthesis and PropertiesUndergrad Expo. IMECE2018-89637Gordon B. Walbert, Adam N. Brock, Owen Pearl,Owen D. Papa, Quang N. Tran, Dmitriy A. Dikin, Temple University, Philadelphia, PA, United States

TRACK 14 ASME INTERNATIONAL UNDERGRADUATE RESEARCH AND DESIGN EXPO (POSTERS ONLY) – SUNDAY, NOVEMBER 11

219

17. Techno-Economic Analysis of MSW BioenergyUndergrad Expo. IMECE2018-89717Miranda Noack, St. Ambrose University, Davenport, IA, UnitedStates

18. Numerical Insights of Fluid-Thermal Characteristics in aHybrid Microjet Liquid-Cooled Heat SinkUndergrad Expo. IMECE2018-89720Shitiz Sehgal, Matthew Schultz, Bladimir Ramos,Pennsylvania State University, University Park, PA, UnitedStates

19. Laser-Induced Graphene SupercapacitorsUndergrad Expo. IMECE2018-89734Robert Sitbon, Queensborough Community College,Westwood, NJ, United States, Alex Sullivan, QueensboroughCommunity College, Little Neck, NY, United States, TriciaMarchese, Queensborough Community College, OaklandGardens, NY, United States

20. Thermal Properties of a Concrete Aerogel PasteCompositeUndergrad Expo. IMECE2018-89775Chris Kobus, Oakland University, Rochester, MI, United States

21. Powering Small Satellites and Robots Using ExternalLaser BeamsUndergrad Expo. IMECE2018-89843Carter Hoffman, University of Arizona, Phoenix, AZ, UnitedStates, Jekan Thanga, University of Arizona, Tucson, AZ,United States

22. Dynamics of Mechanical Power Amplification Systemsin InvertebratesUndergrad Expo. IMECE2018-89849Jennifer Beahan, SUNY New Paltz, New Paltz, NY, UnitedStates

23. Highly Sensitive, Wireless Gas Sensing Based on 3DNonporous Graphene and RFIDUndergrad Expo. IMECE2018-89860Farbod Moghaddam, George Mason University, Fairfax, VA,United States, Daniel Mitchell, George Mason University,Chantilly, VA, United States, Pilgyu Kang, George MasonUniversity, Fairfax, VA, United States, Byoung Gok Kim, Minsu Kim, Korea Research Institute of Chemical Technology,Yuseong-gu, Daejeon, Korea (Republic)

24. Mechanical Optimization of Composite CoatingsDeposited by Self-Limiting Electrospray DepositionUndergrad Expo. IMECE2018-89899Christianna Kuznetsova, Lin Lei, Daehoon Han, Howon Lee,Jonathan Singer, Rutgers, The State University of New Jersey,Piscataway, NJ, United States

25. Energy Absorption Analysis of Additively ManufacturedLattice Mechanical MetamaterialsUndergrad Expo. IMECE2018-89930John Recktenwald, George Mason University, Roanoke, VA,United States, Ali Beheshti, George Mason University, Fairfax,VA, United States

26. Thermal Characterization of GaN-based Electronicsand OptoelectronicsUndergrad Expo. IMECE2018-90001Yiwen Song, Pennsylvania State University, University Park,PA, United States, Tae Kyoung Kim, Moon Uk Cho, Jae MinLee, Joon Seop Kwak, Sunchon National University, Sunchon,Jeonnam, Korea (Republic), Sukwon Choi, Pennsylvania StateUniversity, University Park, PA, United States

27. A Propulsion System for the Asteroid Mobile Imagerand Geologic Observer (AMIGO)Undergrad Expo. IMECE2018-90004Gregory Wilburn, Jekan Thanga, University of Arizona,Tucson, AZ, United States

28. Design and Implementation of Real Time WaterMonitoring SystemUndergrad Expo. IMECE2018-90007H.H. Sait, Khalid AlJudaybi, Abdullah Alkirithi, MohammedAlbarakati, Faiz Khadra, King Abdulaziz University, Rabigh,Makkah, Saudi Arabia

29. Using Time Domain Indentation Data to Characterizethe Poroelasticity of Gels in Frequency DomainUndergrad Expo. IMECE2018-90008Alvin Maningding, Mojtaba Azadi, San Francisco StateUniversity, San Francisco, CA, United States

30. Leidenfrost PhenomenonUndergrad Expo. IMECE2018-90011Nazanin Farokhnia, University of Houston, New York, NY,United States, Nazanin Farokhnia, NanoTherm ResearchGroup, University of Houston, Houston, TX, United States

31. Uterus Material Properties Explored via Atomic ForceMicroscopyUndergrad Expo. IMECE2018-90012Jose Rivera, Alvin Maningding, Victor Emmanuel, SanFrancisco State University, San Francisco, CA, United States,Paolo Rinaudo, University of California at San Francisco, SanFrancisco, CA, United States, Mojtaba Azadi, San FranciscoState University, San Francisco, CA, United States

32. A Comparative Investigation of Sintering Methods forPolymer 3D Printing Using Selective Separation Shaping(SSS)Undergrad Expo. IMECE2018-90022Hadis Nouri, University of Southern California, Los Angeles,CA, United States

33. Thermal Properties and Microstructure Investigation ofNatural Particulate Blended High Density PolyethylenecompositeUndergrad Expo. IMECE2018-90024Balaji Ayyanar Chinnappan, Coimbatore Institute ofTechnology, Coimbatore, India


220

34. The Effect of Multi-Walled Carbon Nanotube AdditivesInto Diesel-Camphor Biofuel Blend on Diesel EnginePerformance, Combustion and EmissionUndergrad Expo. IMECE2018-90030Rahul Kumar Tiwari, Hyundai, Chennai, Tamil Nadu, India,Sanat Kumar, Texas A&M University, College Station, TX,United States

35. Self Powered Orthosis For Stroke PatientUndergrad Expo. IMECE2018-90031Rahul Kumar Tiwari, Hyundai, Chennai, Tamil Nadu, India,Sanat Kumar, Texas A&M University, College Station, TX,United States

36. Performance and Surface Integrity of Wire ElectricalDischarge Machining of Thin Ti6Al4V Plate Using Coatedand Uncoated WiresUndergrad Expo. IMECE2018-90034Luca Watanabe Reolon, Carlos Augusto Laurindo, RicardoDiego Torres, Fred Lacerda Amorim, Pontifìcia UniversidadeCatolica do Parana, Curitiba, PR, Brazil

37. Pave the Path for New Architectured Materials viaMulti-Material 3D PrintingUndergrad Expo. IMECE2018-90035Yaning Li, University of New Hampshire, Durham, NH, UnitedStates

38. An Inflatable Aircraft for Mars ExplorationUndergrad Expo. IMECE2018-90042Andrew Okonya, Aman Chandra, Jekan Thanga, Universityof Arizona, Tucson, AZ, United States

39. Robotic Construction on the Moon and Mars UsingSelective Melting and SinteringUndergrad Expo. IMECE2018-90043Andrew Okonya, Erik Jensen, Aman Chandra, JekanThanga, University of Arizona, Tucson, AZ, United States

40. Fatigue Life Assessment of Dissimilar Aluminum AlloysWeld Joints Under Four Point Rotating Bending ConditionUndergrad Expo. IMECE2018-90049Muhammad Hashir, Riffat Asim Pasha, University ofEngineering and Technology Taxila, Taxila Rawalpindi, Punjab,Pakistan

41. Microstructure-Based Material Sensitive DesignFrameworkUndergrad Expo. IMECE2018-90050Bryan Melara, Yan Li, Marcos Rodriguez, Anh Phung, JunCao, California State University, Long Beach, Long Beach, CA,United States

42. Investigation of Thermocapillary-Induced DepositedShape in Fused-Coating Additive Manufacturing Process of Aluminum AlloyUndergrad Expo. IMECE2018-90060Jun Du, Zhengying Wei, Xi’an Jiaotong University, Xi’an,China

43. Optimization of Process Parameters and SectionalShape of Samples in Single-Layer Single-Pass Sn63Pb37Fused Coating Additive ManufacturingUndergrad Expo. IMECE2018-90061Jun Du, Zhengying Wei, Xi’an Jiaotong University, Xi’an,China

44. Preliminary System Development and ExperimentalStudy of a Robotic Composite Prepreg Layup ProcessUndergrad Expo. IMECE2018-90071Vincent Legnetto, Andrew Wichelns, Yu Zhou, SUNYPolytechnic Institute, Utica, NY, United States

45. Numerical Simulation of Visco-Plastic Fluid FlowBetween Two Parallel Plates With Triangular ObstaclesUndergrad Expo. IMECE2018-90074Nariman Ashrafi, IAU, Tehran, Iran

46. Computational Design of a Bird-Inspired PerchingLanding Gear MechanismUndergrad Expo. IMECE2018-90081Paul Nadan, Christopher Lee, Frankln W. Olin College ofEngineering, Needham, MA, United States

47. Defect Structure Induced Strength and ToughnessAnisotropy in Hexagonal Boron Nitride (hBN)Undergrad Expo. IMECE2018-90085Allison Procak, University of Delaware, Newark, DE, UnitedStates

48. Material Testing of Skeletal Muscle Under Simple ShearUndergrad Expo. IMECE2018-90086Joelle Andres-Beck, Bucknell University, Merlin, OR, UnitedStates

49. Investigating a Framework for Visualizing ReinforcementLearning Algorithms via Quadrupedal Robotic SimulationUndergrad Expo. IMECE2018-90087Brendan Bogar, Paul Reverdy, University of Arizona, Tucson,AZ, United States

50. Assessment of Ultrasonic Vibration Assisted Grindingof CSiC CompositesUndergrad Expo. IMECE2018-90077Yan Wang, Jingnan Zhao, Yinghuai Dong, Chang Shi, TianjinUniversity of Science and Technology, Tianjin, China

51. Hole Shielding: An FEA Study in Optimizing StressReduction Around a HoleUndergrad Expo. IMECE2018-90078Russell Oehlert, Leidos, Oaks, PA, United States, Austin C.Prete, University of Maryland, New Market, MD, United States,Daniel Longenecker, Honda R&D, Dublin, OH, United States,Stephen Kuchnicki, York College of Pennsylvania, York, PA,United States

52. An Object-Oriented Framework for Fast Developmentand Testing of Mobile Robot Control AlgorithmsUndergrad Expo. IMECE2018-90080David Chan, Paul Reverdy, Minh Nguyen, OshadhaGunasekara, Randall Kliman, University of Arizona, T


221

53. Advanced Methods in Computational MechanicsModelling Using Learning Algorithms and Decision SupportSystemsUndergrad Expo. IMECE2018-90068Kingsley Abhulimen, University of Lagos, Lagos, Nigeria

54. A Model for Gas-Liquid Slug Flow in a Horizontal DuctUndergrad Expo. IMECE2018-90075Nariman Ashrafi, IAU, Tehran, Iran

55. Energy Audit in Mechanical DepartmentUndergrad Expo. IMECE2018-90076K.S. Venkatesh, Mar Baselios College of Engineering andTechnology, Trivandrum, Kerala, India, Ashhad Noushad,College, Kollam, Kerala, India, Arjun Rakesh, Aswin S., GokulS. Jain, Mar Baselios College of Engineering and Technology,Trivandrum Kerala, Kerala, India

56. CFD Simulation of Structure of Small Scale PrototypeSolar Chimney Power PlantUndergrad Expo. IMECE2018-90079Premendra Bansod, G.H. Raisoni College of Engineering &Management Wagholi Pune, Pune, Maharashtra, India

57. Developing a Quantitate Tester That Detects HumanSkin Property in Microscale on Live HumanUndergrad Expo. IMECE2018-90088Ed Mo, Miguel Coto, Alvin Maningding, Mojtaba Azadi, SanFrancisco State University, San Francisco, CA, United States

58. Finite Element Modeling of NPS Knee MorphologyUndergrad Expo. IMECE2018-90089Margo E. Yancey, Bucknell University, Lewisburg, PA, UnitedStates, Mark A. Seeley, Geisinger Health Systems, Danville,PA, United States, Benjamin B. Wheatley, Bucknell University,Lewisburg, PA, United States

59. Implementation of a Screw-Drive Extruder in a Desktop 3D-Printing SystemUndergrad Expo. IMECE2018-90110Hongyu Wang, Yujing Zhou, Bucknell University, Lewisburg,PA, United States

60. Inhomogeneous Composition Fields in SiGe/Si(001)Quantum DotsUndergrad Expo. IMECE2018-90111Shawn Egan, Jinye Liu, Md Hossain, University of Delaware,Newark, DE, United States

61. Thermomechanical Stability of Alloy Quantum Dots onThin-FilmsUndergrad Expo. IMECE2018-90112Tianyi Weng, Md Hossain, University of Delaware, Newark,DE, United States

62. Controlling Effective Mechanical Properties ofNanocomposites via Atomic StitchingUndergrad Expo. IMECE2018-90114Colin McDermitt, Md Hossain, University of Delaware,Newark, DE, United States

63. Laser Assisted Ultrasonic Nanocrystal SurfaceModification of AISI 4140 SteelUndergrad Expo. IMECE2018-90115Eman Hassan, Jun Liu, Chang Ye, Yalin Dong, University ofAkron, Akron, OH, United States

64. Three-Dimensional Full-Field Strain Mapping in TotalShoulder ReplacementUndergrad Expo. IMECE2018-90116Yuxiao Zhou, Chujie Gong, Penn State University, StateCollege, PA, United States, Greg Lewis, Penn State College of Medicine and M.S. Hershey Medical Center, Hershey, PA,United States, April Armstrong, Penn State Hershey Bone and Joint Institute, Hershey, PA, United States, Jing Du, Penn State University, State College, PA, United States

65. Blueprint 3D: A Collapsible and Portable 3D PrinterUndergrad Expo. IMECE2018-90117Thomas Van Fossen, Rose-Hulman Institute of Technology,Terre Haute, IN, United States

66. Analysis of Inherent Residual Stress DevelopedThrough Direct Metal Laser Sintering of 316L StainlessSteelUndergrad Expo. IMECE2018-90118Bailey Stillman, Joe Fahmy, Ethan Stiles, Jacob Lewallen,Jerome Suminski, Tyrele Adams, Western Carolina University,Cullowhee, NC, United States

67. Rule-based Control of Micro-Combined Heat andPower SystemsUndergrad Expo. IMECE2018-90119Catherine Weaver, Neera Jain, Purdue University, WestLafayette, IN, United States

68. A Study of the Effect of Fatigue Loading on theBehavior of Additive Manufactured PartsUndergrad Expo. IMECE2018-90120Patricia Cupay, Constance Ziemian, Bucknell University,Lewisburg, PA, United States

69. Geometric Effects on 3D Coating by Self-LimitingElectrosprayUndergrad Expo. IMECE2018-90121Dylan Kovacevich, Rutgers University, Belle Mead, NJ,United States, Lin Lei, Jonathan Singer, Rutgers University,Piscataway, NJ, United States

70. Mathematically Modeling Hysteresis of Polymer-Derived CeramicsUndergrad Expo. IMECE2018-90122J. Lin, California State University, Los Angeles, Los Angeles,CA, United States

71. Computational Hydrodynamic Analysis ofReconfigurable Origami RobotsUndergrad Expo. IMECE2018-90123Andres Zambrano, University of Pennsylvania, Philadelphia,PA, United States


222

72. Limits in trajectory-based deblurringUndergrad Expo. IMECE2018-90124Beatriz Fusaro, Georgia Institute of Technology, Atlanta, GA,United States

73. Development of High-Performance Nanofibers fromWorm Silk: Nanomanufacturing, Characterization, andNanomechanical TestingUndergrad Expo. IMECE2018-90125Iakov Golman, University of Nebraska Lincoln, Lincoln, NE,United States, Mohammad N. Andalib, University ofNebraska – Lincoln, Lincoln, NE, United States, Yuris Dzenis,Univ of Nebraska, Lincoln, NE, United States

74. Development of a Robotic Coffee Harvester Usingcomputer aided design and virtual reality methodsUndergrad Expo. IMECE2018-90126Jeyson Andres Hernandez Barbosa, Universidad Autonomade Bucaramanga, Bucaramanga, Santander, Colombia, Helio Sneyder Esteban Villegas, Universidad Autonóma deBucaramanga, Bucaramanga, Colombia, Andrés F. Aldana,Universidad Autónoma de Bucaramanga, Bucaramanga,Colombia, Brajan Nicolas Ruiz Romero, Sebastian RoaPrada, Oscar E. Rueda, Universidad Autonoma deBucaramanga, Bucaramanga, Santander, Colombia

75. Underground and Overhead Transmission of ElectricPower SystemsUndergrad Expo. IMECE2018-90127Harshitha Gadangi, Rutgers University, Piscataway, NJ,United States, Assimina Pelegri, Rutgers University, EastBrunswick, NJ, United States


223

NOTES

224

Track OrganizerStephen Tse, Rutgers University, United States

Topic OrganizersPo-hao Huang, University of Arkansas, United States

Zhiting Tian, Virginia Tech, United States

TRACK 15 NSF (INCLUDES NSF STUDENTCOMPETITION (POSTERS ONLY))WEDNESDAY, NOVEMBER 14

15-1 NSF-FUNDED RESEARCH15-1-1Exhibit Hall B 11:45am–2:30pm

1. Transfer Printing of Integrated Electronics Onto Cross-Linked CollagenPoster Presentation. IMECE2018-88523Salvador Moreno, Manuel Lopez-Quevedo, Majid Minary,University of Texas at Dallas, Richardson, TX, United States

2. Preparing for Academic Careers: Efficacy of ContinuousHolistic Faculty DevelopmentPoster Presentation. IMECE2018-88895Louis Everett, University of Texas at El Paso, El Paso, TX,United States

3. Radiative Thermal Conduction by Plasmonic ResonatorChains in Semiconductor NanowiresPoster Presentation. IMECE2018-89066Eric Tervo, Michael Gustafson, Baratunde Cola, Zhuomin Zhang, Michael Filler, Georgia Institute ofTechnology, Atlanta, GA, United States

4. Two Part Natural Adhesive at Nano-Interfaces in BonePoster Presentation. IMECE2018-89072Seyedreza Morsali, Yang Wang, Qian Qian, Majid Minary,University of Texas at Dallas, Richardson, TX, United States

5. Nature’s Strategy to Enhance Mechanical and FractureProperties of Nacre (Mother of Pearl)Poster Presentation. IMECE2018-89080Sina Askarinejad, University of Cambridge, Cambridge,United Kingdom, Nima Rahbar, Worcester PolytechnicInstitute, Worcester, MA, United States

6. Role of Circumferential and Longitudinal Smooth Musclein Murine Vaginal TissuePoster Presentation. IMECE2018-89132Gabrielle L. Clark, Dylan J. Lawrence, Sarah H. Lindsey,Tulane University, New Orleans, LA, United States, LaurephileDesrosiers, Leise R. Knoepp, Ochsner Clinical School, NewOrleans, LA, United States, Carolyn L. Bayer, Kristin S. Miller,Tulane University, New Orleans, LA, United States

7. Classification of Activities of Daily Living Based on HandKinematics Obtained Using an IR Depth SensorPoster Presentation. IMECE2018-89169Hajar Sharif, Pramod Chembrammel, University of Illinois atUrbana Champaign, Urbana, IL, United States, T. Kesavadas,University of Illinois at Urbana-Champaign, Mahomet, IL,United States

8. On the Multi-Field Processing of MagnetoactiveElastomeric CompositesPoster Presentation. IMECE2018-89182Md. Abdulla Al Masud, Zoubeida Ounaies, ParisvonLockette, Pennsylvania State University, State College, PA,United States

9. Interfacial and Transport Property Measurements ofLiquid Sodium Within a Porous StructurePoster Presentation. IMECE2018-89199Alexander Limia, Peter Kottke, Daniel Silverstein, Andrei G. Fedorov, Shannon K. Yee, Georgia Institute ofTechnology, Atlanta, GA, United States

10. Suction Effects in Crater ArraysPoster Presentation. IMECE2018-89205Liu Wang, Kyoungho Ha, Shutao Qiao, Nanshu Lu,University of Texas at Austin, Austin, TX, United States

11. Adhesion and Friction Control the Aspect Ratio andStrain in 2D Material BlistersPoster Presentation. IMECE2018-89210Zhaohe Dai, Nanshu Lu, University of Texas at Austin, Austin,TX, United States

12. Self-Cleaning, High Transmission, Near Unity HazeOTS/Silica Nanostructured GlassPoster Presentation. IMECE2018-89211Sajad Haghanifar, Paul Leu, University of Pittsburgh,Pittsburgh, PA, United States

13. Flexible Nanograss With Highest Combination ofTransparency and Haze for Optoelectronic PlasticSubstratesPoster Presentation. IMECE2018-89243Sajad Haghanifar, Paul Leu, University of Pittsburgh,Pittsburgh, PA, United States

14. Exploring Biases Between Human and MachineGenerated DesignsPoster Presentation. IMECE2018-89244Christian Lopez, Pennsylvania State University, Newport, PA,United States, Conrad Tucker, Pennsylvania State University,State College, PA, United States, Scarlett Miller, PennsylvaniaState University, University Park, PA, United States

15. Atomistic Simulations of Mechanical Properties ofCircular and Collapsed Carbon Nanotubes With CovalentCross-LinksPoster Presentation. IMECE2018-89260Arun Thapa, Alexey Volkov, University of Alabama,Tuscaloosa, AL, United States

16. Numerical Investigation of Internal Forces DuringCarbon Nanotube Forest Self-AssemblyPoster Presentation. IMECE2018-89293Taher Hajilounezhad, Matthew Maschmann, University ofMissouri, Columbia, MO, United States

TRACK 15 NSF (INCLUDES NSF STUDENT COMPETTION (POSTERS ONLY)) – WEDNESDAY, NOVEMBER 14

225

17. Electric Field Effects on KTN Ferroelectric PhaseTransitions Studied by Ultrasound Pulse-Echo TechniquePoster Presentation. IMECE2018-89300Robert Mech, Gordon College, Wenham, MA, United States

18. The Path to Optical Sorting of Large DielectricMicroparticles With Whispering Gallery ModesPoster Presentation. IMECE2018-89301Alexander King, Nathan J. Jordan, Gordon College, Wenham,MA, United States

19. Maximizing Energy Efficiency and Minimizing ThermalDose in Electrosurgical Tissue Joining ProcessesPoster Presentation. IMECE2018-89311Scott Phillips, Washington State University, Bellevue, WA,United States, Che-Hao Yang, Roland Chen, WashingtonState University, Pullman, WA, United States

20. Numerical Studies on Dynamic Interactions BetweenLugged Wheel and Granular MediaPoster Presentation. IMECE2018-89313Preethi Ravula, Gizem Dilber Acar, University of Maryland,College Park, College Park, MD, United States, BalakumarBalachandran, University of Maryland, College Park, Rockville,MD, United States

21. Effects of Target Thickness on Interfaces of ImpactWeldsPoster Presentation. IMECE2018-89320Taeseon Lee, Anupam Vivek, Glenn Daehn, Ohio StateUniversity, Columbus, OH, United States

22. Scalable Pulsed Light Sintering of NanomaterialsPoster Presentation. IMECE2018-89334Michael Dexter, Rutgers, The State University of New Jersey,Middlesex, NJ, United States, Hyun-Jun Hwang, RajivMalhotra, Rutgers, The State University of New Jersey,Piscataway, NJ, United States, Chih-Hung Chang, OregonState University, Corvallis, OR, United States

23. Tunable Granular Metamaterials Based Upon WavePropagation Analysis Using Granular MicromechanicsPoster Presentation. IMECE2018-89335Nima Nejadsadeghi, Anil Misra, University of Kansas,Lawrence, KS, United States

24. Additive Manufacturing Aids the Verification of GranularMicromechanics ModelPoster Presentation. IMECE2018-89339Nima Nejadsadeghi, Anil Misra, University of Kansas,Lawrence, KS, United States

25. Effects of Environmental Conditions on Geometricaland Mechanical Properties of Polycarbonate SamplesMade by the Fused Filament Fabrication ProcessPoster Presentation. IMECE2018-89344Yishu Yan, Lichen Fang, Ojaswi Agarwal, Kevin Hemker,Sung Kang, Johns Hopkins University, Baltimore, MD, UnitedStates

26 Titanium Oxynitride Thin Films With Large PowerConversion Efficiency in Photovoltaic Solar CellsPoster Presentation. IMECE2018-89348Nikhil Reddy Mucha, Surabhi Shaji, Panupong Jaipan, NorthCarolina A&T State University, Greensboro, NC, United States,Monica Kathiyar, Indian Institute of Technology, Kanpur, India,Jeffrey Shield, University of Nebraska Lincoln, Lincoln, NE,United States, Hemali Rathnayake, University of NorthCarolina at Greensboro, Greensboro, NC, United States,Dhananjay Kumar, North Carolina A&T State University,Greensboro, NC, United States

27. Rate Dependent Fracture Under Mixed-Mode LoadingConditions for an Epoxy/Silicon InterfacePoster Presentation. IMECE2018-89365Tianhao Yang, Rui Huang, Kenneth Liechti, University ofTexas at Austin, Austin, TX, United States

28. Validated Nonlinear Finite Element Analysis of WireRope Isolators Under Dynamic ExcitationsPoster Presentation. IMECE2018-89381Hamid Ghasemi, Claudia Marin, Howard University,Washington, DC, United States

29. Contactless Ultrafast Actuation by UsingPhotomechanical Instabilities in Azobenzene-Functionalized PolymersPoster Presentation. IMECE2018-89395Junfeng Gao, University of Pittsburgh, Pittsburgh, PA, UnitedStates, Matthew L. Smith, Hope College, Holland, MI, UnitedStates, M. Ravi Shankar, University of Pittsburgh, Pittsburgh,PA, United States

30. Homogenization and Stochastic Fracture Simulation ofQuasi-Brittle MaterialsPoster Presentation. IMECE2018-89436Bahador Bahmani, University of Tennessee, Knoxville,Tullahoma, TN, United States, Reza Abedi, University ofTennessee, Tullahoma, TN, United States, Philip L. Clarke,University of Tennessee Space Institute, Tullahoma, TN, UnitedStates, Anand Nagarajan, Ming Yang, Ohio State University,Columbus, OH, United States, Soheil Soghrati, Ohio StateUniversity, Dublin, OH, United States, Katherine A. Acton,University of St. Thomas, St. Paul, MN, United States

31. Understanding and Predicting Properties andPerformance of Additively Manufactured Nickel-BasedSuperalloysPoster Presentation. IMECE2018-89437Weitao Shan, Grace V. de Leon Nope, University ofPittsburgh, Pittsburgh, PA, United States

32. Adaptive Space-Time Deep-Learning EnabledMultiscale PoromechanicsPoster Presentation. IMECE2018-89460Kun Wang, Waiching Sun, Columbia University, New York, NY,United States


226

33 Effects of Varying Processing Parameters on theThermo-Physical Properties of 316L Stainless SteelFabricated by Selective Laser MeltingPoster Presentation. IMECE2018-89463Nigel Amoafo-Yeboah, Southern University and A&M College,Baton Rouge, LA, United States, Patrick Mensah, SouthernUniversity, Baton Rouge, LA, United States, StephenAkwaboa, Southern University and A&M College, BatonRouge, LA, United States, Samuel Ibekwe, SouthernUniversity, Baker, LA, United States

34. Modeling of Multiphase Heat Transfer in MicroscaleHeat SinksPoster Presentation. IMECE2018-89466Kojo Asiamah Osafo, Southern University A&M College,Baton Rouge, LA, United States, Patrick Mensah, SouthernUniversity, Baton Rouge, LA, United States, StephenAkwaboa, Southern University and A&M College, BatonRouge, LA, United States

35. Experimental Investigation of Structural Power Flow in2D Locally Resonant Elastic MetamaterialsPoster Presentation. IMECE2018-89483Hasan Al Ba’ba’a, Mostafa Nouh, University at Buffalo, StateUniversity of New York, Buffalo, NY, United States

36. 3D Printing of Molecularly Ordered HeterogeneousActive MatterPoster Presentation. IMECE2018-89486Mohsen Tabrizi, University of Pittsburgh, Pittsburgh, PA,United States, Mohand Saed, Taylor Ware, University of Texasat Dallas, Richardson, TX, United States, M. Ravi Shankar,University of Pittsburgh, Pittsburgh, PA, United States

37. Competitive Two-Stage Location and Pricing Decisionson a Network: An Air Transportation Case StudyPoster Presentation. IMECE2018-89517Reed Harder, Vikrant Vaze, Dartmouth College, Hanover, NH,United States

38. Design of Tribological Composites for Multi-FunctionalApplicationsPoster Presentation. IMECE2018-89520Xiu Jia, Tomas Grejtak, Brandon A. Krick, NatashaVermaak, Lehigh University, Bethlehem, PA, United States

39. Pro-Environmental Social Influence via RandomizedIncentive ProgramsPoster Presentation. IMECE2018-89540John Edgar Fontecha Garcia, University at Buffalo, StateUniversity of New York, Buffalo, NY, United States, ManjunathJois, U.S. Coast Guard, Elizabeth City, NC, United States,Jose L. Walteros, Alexander Nikolaev, University at Buffalo,State University of New York, Buffalo, NY, United States

40. Microelasticity Modeling of MicrostructuresPoster Presentation. IMECE2018-89555Zachary J. Morgan, Yongmei M. Jin, Michigan TechnologicalUniversity, Houghton, MI, United States

41. Scaling Laws for Porous Solids With IntermediateRelative DensitiesPoster Presentation. IMECE2018-89575Timothy Ibru, Georgia Institute of Technology, Decatur, GA,United States, Vadim Roytershteyn, Space Science Institute,Boulder, CO, United States, Garritt Tucker, Colorado Schoolof Mines, Golden, CO, United States, Antonia Antoniou,Georgia Institute of Technology, Atlanta, GA, United States

42. Parameter Identification Through Analysis of Electro-Elastic Nonlinearities in Ultrasound Acoustic EnergyTransfer SystemsPoster Presentation. IMECE2018-89578Vamsi Chandra Meesala, Virginia Tech, Blacksburg, VA,United States, Muhammad Hajj, Stevens Institute ofTechnology, Hoboken, NJ, United States, Shima Shahab,Virginia Tech, Blacksburg, VA, United States

43. X-Ray Analysis of Melt-Spun Nanostructured NiTiCuShape Memory RibbonsPoster Presentation. IMECE2018-89603Prashant Gunai, Pranav Bhale, Pnina Ari-Gur, WesternMichigan University, Kalamazoo, MI, United States

44. Second-Order Homogenization Estimates for theMacroscopic Behavior and Field Fluctuations inViscoplastic Composites and Comparisons With Full-FieldSimulationsPoster Presentation. IMECE2018-89609Joshua Furer, Pedro Ponte Castaòeda, University ofPennsylvania, Philadelphia, PA, United States

45. Origin of Nanoscale Friction Contrast BetweenGraphene and MoS2

Poster Presentation. IMECE2018-89612Han Ye, University of Pennsylvania, Philadelphia, PA, UnitedStates, Zhijiang Ye, Miami University, Oxford, OH, UnitedStates, Mohammad R. Vazirisereshk, University of California,Merced, Merced, CA, United States, Mengqiang Zhao, A.T. Charlie Johnson, University of Pennsylvania, Philadelphia,PA, United States, Ashlie Martini, University of California,Merced, Atwater, CA, United States, Robert W. Carpick,University of Pennsylvania, Philadelphia, PA, United States

46. A Comprehensive Study of Soft Porous Lubrication,From Red Cells to Skiing/SnowboardingPoster Presentation. IMECE2018-89621Zenghao Zhu, Qianhong Wu, Villanova University, Villanova,PA, United States

47. Optimizing the Input Parameters of Binder Jetting forthe Additive Manufacturing (AM) of Aluminum OxidePoster Presentation. IMECE2018-89628Edgar Mendoza, Carnegie Mellon University, Pittsburgh, PA,United States

48. The Taylor-Culick Profile for Spinning Rocket MotorsPoster Presentation. IMECE2018-89629Orie Cecil, Joseph Majdalani, AuburUniversity, AL, United States


227

49. Effects of Surface Energy Reducing Agents onAdhesion Force in Liquid Bridge MicrostereolithographyPoster Presentation. IMECE2018-89638Aslan Bafahm Alamdari, Jeongwoo Lee, Md. Omar FarukEmon, Jae-Won Choi, University of Akron, Akron, OH, UnitedStates

50. Chance-Constrained Optimal Control Approach toOptimal Path PlanningPoster Presentation. IMECE2018-89648Rachit Aggarwal, Mrinal Kumar, Ohio State University,Columbus, OH, United States

51. Hydrodynamic Performance of Optimal FlexibleHydrofoil Kinematics for Biomimetic DesignPoster Presentation. IMECE2018-89656Hisham Shehata, Craig Woolsey, Muhammad Hajj, VirginiaTech, Blacksburg, VA, United States

52. In Situ Monitored Self-Assembly of 3D Graphene-BasedNanostructuresPoster Presentation. IMECE2018-89662Chunhui Dai, Kriti Agarwal, Jeong-Hyun Cho, University ofMinnesota, Minneapolis, Minneapolis, MN, United States

53. Design of 2D/3D-Helmholtz Coil Systems for DrivingFePd Nanohelix Nanorobots for Cancer Treatment and ofDynamic Mechanical Tester System for Layered Structureof Agarose Gel and Cancer CellsPoster Presentation. IMECE2018-89684Minoru Taya, Cerwyn Chiew, Satomi Takao, University ofWashington, Seattle, WA, United States

54. A Comprehensive Study of Fluid Flow in a Soft PorousMaterial Under CompactionPoster Presentation. IMECE2018-89700Qiuyun Wang, Villanova University, Chesterbrook, PA, UnitedStates, Qianhong Wu, Villanova University, Villanova, PA,United States

55. New Design of a Mechanical Transducer in AtomicForce Microscopy for Imaging Beyond TopographyPoster Presentation. IMECE2018-89724Sajith Dharmasena, Ohio State University, Columbus, OH,United States, Randi Potekin, Purdue University, Purdue, IN,United States, Zining Yang, Seok Kim, Lawrence Bergman,Alexander Vakakis, University of Illinois at Urbana-Champaign, Urbana, IL, United States, Hanna Cho, Ohio StateUniversity, Columbus, OH, United States

56. Novel Supply Chain and Process Modeling for CellTherapy Manufacturing and DistributionPoster Presentation. IMECE2018-89756Yi Liu, Robert Bishop, Aubrey Incorvaia, Georgia Institute ofTechnology, Atlanta, GA, United States, Amritava Das,University of Wisconsin-Madison, Madison, WI, United States,Bhavya Divvela, Georgia Institute of Technology, Atlanta, GA,United States, Krishanu Saha, University of Wisconsin-Madison, Madison, WI, United States, Aaron Levine, KanWang, Chelsea White, Ben Wang, Georgia Institute ofTechnology, Atlanta, GA, United States

57. High Prandtl Number Facility for Study of Rayleigh-Benard Convection in Various Container ShapesPoster Presentation. IMECE2018-89757Jessica Imgrund, Hamed Ziad Ammar, Stephen R.Johnston, Georgia Institute of Technology, Atlanta, GA, UnitedStates, Enrico Fonda, New York University, Brooklyn, NY,United States, Devesh Ranjan, Georgia Institute ofTechnology, Atlanta, GA, United States, Katepalli R.Sreenivasan, New York University, Brooklyn, NY, United States

58. Fuzzy Logic Utilization for UAV Path PlanningPoster Presentation. IMECE2018-89777Zoe Lee, Manish Kumar, Kelly Cohen, University ofCincinnati, Cincinnati, OH, United States

59. Theoretical and Experimental Study of TransientSqueezing FlowPoster Presentation. IMECE2018-89813Ji Lang, Qianhong Wu, Villanova University, Villanova, PA,United States

60. Atomistic Simulation and Classical Nucleation Theoryof Edge Dislocation Jog-Pair Formation in AluminumPoster Presentation. IMECE2018-89816Anas Abu-Odeh, Maeva Cottura, Mark Asta, University ofCalifornia, Berkeley, Berkeley, CA, United States

61. Adhesion Study for Robotic 3D PrintingPoster Presentation. IMECE2018-89836Arriana Nwodu, Florida Agricultural & Mechanical University,Tallahassee, FL, United States, Raquel Werner, Jolie Frketic,Florida State University, Tallahassee, FL, United States, Tarik Dickens, Florida Agricultural & Mechanical University,Tallahassee, FL, United States

62. Magnetocaloric Properties of Fe90Ta10 Thin FilmsPoster Presentation. IMECE2018-89850Surabhi Shaji, North Carolina A&T State University,Greensboro, NC, United States, Prakash Giri, University ofNebraska–Lincoln, Lincoln, NE, United States, Nikhil ReddyMucha, North Carolina A&T State University, Greensboro, NC,United States, Christian Binek, University of Nebraska–Lincoln, Lincoln, NE, United States, Dhananjay Kumar, NorthCarolina A&T State University, Greensboro, NC, United States

63. Experimental Assessment of Miniature AccelerometersDesigned for Sensing Middle Ear MotionPoster Presentation. IMECE2018-89857Alison Hake, Chuming Zhao, University of Michigan, AnnArbor, MI, United States, Wang-Kyung Sung, VesperTechnologies Inc., Boston, MA, United States, Karl Grosh,University of Michigan, Ann Arbor, MI, United States

64. Influence of Gold Catalyst on the Growth of TitaniumNitride NanowiresPoster Presentation. IMECE2018-89858Panupong Jaipan, Chandra Nannuri, Nikhil Reddy Mucha,Kaushik Sarkar, North Carolina A&T State UniversityGreensboro, NC, United States, Adele Moatti, Jay Narayan,North Carolina State UniversitySvitlana Fialkova, Dhananjay Kumar, North Car


228

65. Design and Validation of New Cryogenic NitrogenFacility for Exploration of Rayleigh-Benard Convection atHigh Rayleigh NumbersPoster Presentation. IMECE2018-89861Stephen R. Johnston, Jessica Imgrund, Georgia Institute ofTechnology, Atlanta, GA, United States, Enrico Fonda,Katepalli R. Sreenivasan, New York University, Brooklyn, NY,United States, Devesh Ranjan, Georgia Institute ofTechnology, Atlanta, GA, United States

66. Dependence of Mechanical Characteristics of Polymer-Grafted Particle Films on Chain ArchitecturePoster Presentation. IMECE2018-89868Jaejun Lee, Zongyu Wang, Tingwei Deng, Robert F. Davis,Krzysztof Matyjaszewski, Micheal R. Bockstaller, CarnegieMellon University, Pittsburgh, PA, United States

67. A Combined Experimental and Computational Study onthe Process-Structure-Property Relationship of AdditivelyManufactured Bi-Continuous PiezocompositesPoster Presentation. IMECE2018-89872Zhuo Wang, Mississippi State University, Starkville, MS,United States, Li He, University of Iowa, Iowa City, IA, UnitedStates, Wenhua Yang, Mississippi State University, Starkville,MS, United States, Xuan Song, University of Iowa, Iowa City,IA, United States, Lei Chen, Mississippi State University,Starkville, MS, United States

68. Additive Manufacturing of Complex Micro-ArchitectedGraphene AerogelsPoster Presentation. IMECE2018-89882Ryan Hensleigh, Huachen Cui, Virginia Tech, Blacksburg, VA,United States, James Oakdale, Jianchao Ye, PatrickCampbell, Eric Duoss, Christopher M. Spadaccini,Lawrence Livermore National Laboratory, Livermore, CA,United States, Xiaoyu Zheng, Virginia Tech, Blacksburg, VA,United States, Marcus Worsley, Lawrence Livermore NationalLaboratory, Livermore, CA, United States

69. Phase Transforming Architectured/Cellular MaterialsUnder Biaxial/Multiaxial Loading ConditionsPoster Presentation. IMECE2018-89887Yunlan Zhang, Mirian Velay, Pablo Zavattieri, PurdueUniversity, West Lafayette, IN, United States, David Restrepo,San Antonio University, San Antonio, TX, United States, Nilesh Mankame, General Motors Research &Devevelopment, Warren, MI, United States

70. A Comparative Study on Selective Laser Melting andElectron Beam Additive Manufacturing ProcessesPoster Presentation. IMECE2018-89915M. Shafiqur Rahman, Paul D. Herrington, Paul Schilling,University of New Orleans, New Orleans, LA, United States,Uttam Chakravarty, University of New Orleans, Kenner, LA,United States

71. A Microstructure-Based Modeling Approach forElectrostriction in RelaxorPoster Presentation. IMECE2018-89919Anil Erol, Paris Von Lockette, Pennsylvania State University,University Park, PA, United States

72. Mapping of Phonon Modes Between Two-Dimensionaland Three-Dimensional SystemsPoster Presentation. IMECE2018-89920Hyun-Young Kim, Alan McGaughey, Carnegie MellonUniversity, Pittsburgh, PA, United States

73. Assessment of Angiogenesis and Cell Survival of aMulti-Layered Bio-printed Aortic ConstructPoster Presentation. IMECE2018-89932Beu P. Oropeza, Luis H. Solis, Daisy Alvarado, JesusCastor, Mirsa Gonzalez Favela, Alba Leyva, Emilio Loera,Gisela Lopaz, Fernanda Lugo, Erik Munoz, PaolaRodriguez, Leila Subia, Valeria Altamirano, Jesus Cedeno,Dante Chaparro Vega, Octavio Cordova, Isaac Deaguero,Erwin Delgado, Michael Furth, Mario Garcia, TaniaMiramontes, Carlos Serna, Arahim Zuniga Herrera, ThomasBoland, University Texas at El Paso, El Paso, TX, United States

74. Removal of Off-Flavor Compounds in AquacultureEnvironment: Optimizing New Techniques for SustainableAquaculture SystemsPoster Presentation. IMECE2018-89944Tunan Peng, Norma Alcantar, University of South Florida,Tampa, FL, United States

75. Continuous Phase Transition Control of VanadiumDioxide Using Feedback MechanismPoster Presentation. IMECE2018-89955Jiguo Dai, Chandika Annasiwatta, Jordan Berg, AyrtonBernussi, Zhaoyang Fan, Beibei Ren, Texas Tech University,Lubbock, TX, United States

76. Design and Additive Manufacturing of Self-SensingArchitected MetamaterialsPoster Presentation. IMECE2018-89986Amanda Wei, Xiaoyu Zheng, Virginia Tech, Blacksburg, VA,United States

77. Welding Robotic Co-Worker: Autonomous WeldingSeam ExtractionPoster Presentation. IMECE2018-90020Yao Li, University of Illinois at Urbana-Champaign, Urbana, IL,United States, T. Kesavadas, University of Illinois at Urbana-Champaign, Mahomet, IL, United States

15-2 NSF RESEARCH EXPERIENCES FORUNDERGRADUATES (REU)15-2-1

11:45am–2:30pm

78. Custom Instrumentation for Vibration Assisted NanoAbrasive Machining ProcessPoster Presentation. IMECE2018-89111Nathan Darkins, University of Cincinnati, Cincinnati, OH,United States, Anne Brant, University of Cincinnati, Blue Ash,OH, United States, Murali Sundaram, University of Cincinnati,Cincinnati, OH, United States


229

79. Printing of Three Dimensional Metal Structures byElectrochemical Additive ManufacturingPoster Presentation. IMECE2018-89112Narek Manukyan, University of Cincinnati, Cincinnati, OH,United States, Anne Brant, University of Cincinnati, Blue Ash,OH, United States, Murali Sundaram, University of Cincinnati,Cincinnati, OH, United States

80. Dispersion Mechanics of Inertially Amplified AcousticMetamaterialsPoster Presentation. IMECE2018-89484David DePauw, Mostafa Nouh, University at Buffalo, StateUniversity of New York, Buffalo, NY, United States

81. Water Desalination Using UV-Polymerizable LyotropicLiquid Crystal-Carbon Nanotube Composite MembranesPoster Presentation. IMECE2018-89492Dominique Porcincula, California Polytechnic State University,San Luis Obispo, CA, United States, Chris Kasprzak, VirginiaTech, Blacksburg, VA, United States, Alejandro Madriz,Shanju Zhang, California Polytechnic State University, SanLuis Obispo, CA, United States

82. Failure Resilient Design of an Electro-HydrostaticActuator Based Flight Control SystemPoster Presentation. IMECE2018-89635Samuel Zelman, Pingfeng Wang, University of Illinois atUrbana-Champaign, Urbana, IL, United States

83 Nanoporous Copper in Dentin Resin CompositesPoster Presentation. IMECE2018-89642Sarah Violante, Georgia Institute of Technology, Atlanta, GA,United States, Timothy Ibru, Georgia Institute of Technology,Decatur, GA, United States, Antonia Antoniou, GeorgiaInstitute of Technology, Atlanta, GA, United States

84. Research Experience for Teachers: Similarities WithREU ExperiencePoster Presentation. IMECE2018-89776Chris Kobus, Xia Wang, Oakland University, Rochester, MI,United States

85. Mechanical Behavior of Poly(lactic Acid) UndergoingDegradationPoster Presentation. IMECE2018-89792Anton Venediktov, New Jersey Institute of Technology,Newark, NJ, United States, Shawn Chester, New JerseyInstitute of Technology, North Caldwell, NJ, United States

86. Optimizing Microrobotic Flight With Two-PhotonPolymerizationPoster Presentation. IMECE2018-89802Lisa Soderlind, Igor Paprotny, University of Illinois atChicago, Chicago, IL, United States

87. Fabrication and Characterization of ColoredNanoporous Sol-Gel GlassesPoster Presentation. IMECE2018-89878Chih-Hung Chang, Alvin Chang, Yujuan He, Oregon StateUniversity, Corvallis, OR, United States, Maria Torres Arango,West Virginia University, Morgantown, WV, United States, Rajiv Malhotra, Rutgers, The State University of New Jersey,New Brunswick, NJ, United States, Kostas Sierros, WestVirginia University, Morgantown, WV, United States, ZhenxingFeng, Maoyu Wang, Oregon State University, Corvallis, OR,United States, Yang Ren, APS, Argonne, IL, United States

88. Papertronic Leak DetectorsPoster Presentation. IMECE2018-89961Mauroof Khan, Ramendra Pal, Xiyue Zou, Rutgers, The StateUniversity of New Jersey, Piscataway, NJ, United States,Urvish Patel, Rutgers, The State University of New Jersey,Carteret, NJ, United States, Aaron Mazzeo, Rutgers, The StateUniversity of New Jersey, Piscataway, NJ, United States

89. Flexible and Conformal Paper-Based, Force-SensingPadsPoster Presentation. IMECE2018-89978Cora LoPresti, Tongfen Liang, Xiyue Zou, Aaron Mazzeo,Rutgers, The State University of New Jersey, Piscataway, NJ,United States


230

16-1-1: Acoustics, Vibration, and Phononics

16-2-1: Advanced Manufacturing

16-4-1: Biomedical & Biotechnology Engineering

16-5-1: Design, Reliability, Safety, and Risk

16-6-1: Dynamics, Vibration, and Control

16-7-1: Engineering Education

16-8-1: Energy

16-9-1: Fluids Engineering

16-10-1: Heat Transfer and Thermal Engineering

16-11-1: Materials: Genetics to Structures

16-12-1: Mechanics of Solids, Structures and Fluids

16-13-1: Society-Wide Micro and Nanotechnology Forum

16-14-1: Best Student Poster Competition on Computational Mechanics

Track OrganizerAlbert Ratner, University of Iowa, United States

Topic OrganizersQian Qian, University of Texas at Dallas, United States

Ganesh Balasubramanian, Lehigh University, United States Jun Liu, North Carolina State University, United States

Bo Li, Villanova University, United States Caglar Oskay, Vanderbilt University, United States

TRACK 16 VIRTUAL PODIUM (POSTERS)WEDNESDAY, NOVEMBER 14

16-1 ACOUSTICS, VIBRATION, ANDPHONONICS16-1-1 Acoustics, Vibration, and PhononicsExhibit Hall B 11:45am–2:30pm

90. On the Role of Geometry Parameters in the DynamicCharacteristic and Stability of Wave Journal BearingsPoster Paper Publication. IMECE2018-88258Baisong Yang, Xi’an Jiaotong Unviersity, Shaanxi, China,Sheng Feng, Haipeng Geng, Jian Zhou, Lie Yu, Xi’anJiaotong University, Xi’an City, China

91. Origami-Based Elastic Metamaterials for LowFrequency Vibration Suspension and Flexural Wave ControlPoster Presentation. IMECE2018-88516Mingkai Zhang, Beijing Institute of Technology, Beijing,Beijing, China, Rui Zhu, University of Washington, Seattle, WA,United States

92. Vorticoacoustic Stability Analysis of the BidirectionalVortex EnginePoster Presentation. IMECE2018-89037Paul Kovacic, Auburn University, Auburn, AL, United States

93. Analyzing the Interaction of Neural Signals in theAuditory Brain Structures With Applied Signal ProcessingTechnologiesPoster Presentation. IMECE2018-89283Na Zhu, Casey Chisnell, University of Michigan–Flint, Flint, MI,United States, Hao Luo, Jinsheng Zhang, Wayne StateUniversity, Detroit, MI, United States

16-2 ADVANCED MANUFACTURING16-2-1 Advanced Manufacturing

11:45am–2:30pm

94. Solution-Gated Ion-Sensitive Field Effect TransistorWith Polymer Selective Membrane for Nitrate DetectionPoster Paper Publication. IMECE2018-87918Jungyoon Kim, Qingyuan Liu, Tianhong Cui, University ofMinnesota, Minneapolis, MN, United States

95. Development of a Low Coefficient of ThermalExpansion Composite Tooling via 3D PrintingPoster Paper Publication. IMECE2018-88594Pedro Cortes, Michael Maravola, Michael Juhasz, DouglasRutana, Bridger Kowalczyk, Brett Conner, Eric Macdonald,Youngstown State University, Youngstown, OH, United States

96. Dynamic Testing of Polymeric AM Parts With DifferentInfill ConditionsPoster Presentation. IMECE2018-88702Serdar Tumkor, Jonathan Holman, Jace, M. Rearick,Mitchell, D. Krinock, Joe Doerfler, University of Pittsburgh,Johnstown, PA, United States

97. Design Innovation in a Water Well Potable DrillingMachinePoster Presentation. IMECE2018-88776Rufus Chime, Institute of Management and Technology, EnuguState, Nigeria

98. Design Innovation in Palm Kernel Cracking Machine:Design for ManufacturingPoster Presentation. IMECE2018-88777Rufus Chime, Institute of Management and Technology, EnuguState, Nigeria

99. Machining and Bio-Machining ConsiderationsPoster Presentation. IMECE2018-88989Satya Prasad Paruchuru, VNRVJIET, Hyderabad, India

100. Considerations for Bulk-Manufacturing SimulatorsPoster Presentation. IMECE2018-88996Satya Prasad Paruchuru, VNRVJIET, Hyderabad, India

101. Microscale 3D Printing by Additive NanoparticleAssembly for Energy Storage Systems and BiomedicalDevicesPoster Presentation. IMECE2018-89039Sadeq Saleh, Mark Nicholas, Rit Bezbaruah, Eric Yttri,Rahul Panat, Carnegie Mellon University, Pittsburgh, PA,United States

102. Integrative Additive Manufacturing for HermeticallySealed Functional ComponentsPoster Presentation. IMECE2018-89992Marquese Pollard, Florida Agricultural and MechanicalUniversity, Tallahassee, FL, United States

16-4 BIOMEDICAL & BIOTECHNOLOGYENGINEERING16-4-1 Biomedical & Biotechnology Engineering

11:45am–2:30pm

103. Estimation Method of 3D Position of Guidewire inEndovascular TreatmentPoster Paper Publication. IMECE2018-86392Hirohito Yamamoto, Yamaguchi University, Yamaguchi,Japan, Koji Mori, Takashi Saito, Hiroko Kadowaki,Yamaguchi University, Ube/Yamaguchi, Japan

104. The Effect of Shoe Sole Stiffness on Trunk LeanPoster Presentation. IMECE2018-86496Garrett Sutton, Matthew Yough, Travis Schmeling, CaseyVollmer, Abdulhamid Khawajah, Anne Schmitz, GannonUniversity, Erie, PA, United States

TRACK 16 VIRTUAL PODIUM (POSTERS) – WEDNESDAY, NOVEMBER 14

231

105. A Numerical Bioheat Transfer Model to Estimate Timeof Death With Application in Forensic SciencePoster Presentation. IMECE2018-86614Saeed Tiari, Madeline Carnell, Rebecca Red Horse, OliviaRose, Gannon University, Erie, PA, United States

106. Computational Study of Onset Dynamics in Neuron-Spiking With Threshold AdaptationPoster Paper Publication. IMECE2018-86689Loabat Shojaei Kavan, Abhijeet Wadkar, SamuelAsokanthan, University of Western Ontario, London, ON,Canada

107. Reproduction Analysis of Injury Condition Using FiniteElement Modeling of the Head in Cases With TraumaticHigher Brain Dysfunction Caused by Traffic AccidentsPoster Paper Publication. IMECE2018-86945Shigeto Hayashi, Hyogo Emergency Medical Center,Japanese Red Cross Kobe Hospital, KOBE, Japan, HiromichiNakadate, Shinshu University, Ueda, Japan, Yuelin Zhang,Sophia University, Tokyo, Japan, Kojiro Mekata, HaruoYamashita, Japanese Red Cross Kobe Hospital, Kobe, Japan,Shinichi Nakayama, Hyogo Emergency Medical Center, Kobe,Japan, Eiji Kohmura, Kobe University, Kobe, Japan, YasuhiroMatsui, National Traffic Safety and Environment Laboratory,Chofu, Japan, Hong Ji, Beijing Computing Center, Beijing,China, Shigeru Aomura, Tokyo Metoropolitan University, Hino,Japan

108. Development of a Low-Cost Hip Flexion AssistiveDevicePoster Presentation. IMECE2018-87101Grace McGrath, Madeline Carnell, Stacy Joseph, AnneSchmitz, Gannon University, Erie, PA, United States

109. Effects of Prosthetic Simulator on Muscle ActivityPoster Presentation. IMECE2018-87161Olivia Rose, Benjamin Reed, Rebecca Red Horse, AaronMandrake, Mohammed Ashmouni, Gannon University, Erie,PA, United States

110. Monte Carlo Simulation for High-k MOSFETDosimetersPoster Presentation. IMECE2018-87170Hui Niu, Ansys Inc., Canonsburg, PA, United States

111. Simulation of the Strain Amplification in Sulci Due toBlunt Impact to the HeadPoster Presentation. IMECE2018-88176Brian Fagan, ARL WMRD, Adelphi, MD, United States,Timothy Zhang, Sikhanda S. Satapathy, ARL WMRD, APG,MD, United States

112. Developing Activated Carbon From Date Seeds andCarbon Fiber for Use in Liver Support DevicesPoster Paper Publication. IMECE2018-88233Ali Hilal-Alnaqbi, Asel Mwafy, Ameereh Seyedzadeh,Waleed Ahmed, Aisha Hilal Alnaqbi, United Arab EmiratesUniversity, Al Ain, United Arab Emir.

113. Development of a Novel 3D Printing for PorousBioceramic ScaffoldsPoster Presentation. IMECE2018-88256Maohua Lin, Yunqing Kang, Chi-tay Tsai, Xuesong Wang,Florida Atlantic University, Boca Raton, FL, United States

114. In Silico Analysis of the Failure of Uniaxial TestingSpecimensPoster Presentation. IMECE2018-88381Ronald Fortunato, University of Pittsburgh, Venetia, PA,United States, Chao Sang, Spandan Maiti, Anne M.Robertson, University of Pittsburgh, Pittsburgh, PA, UnitedStates

115. Breaking BonesPoster Presentation. IMECE2018-88735Rebekah Eberle, Bashayr Alturkestani, Anne Schmitz,Gannon University, Erie, PA, United States

116. Development of a Lizard PBT Data CollectionApparatusPoster Presentation. IMECE2018-88809Jeong Tae Ok, Colton Dorion, William Hendrickson, KennanMarino, Kevin Tracy, Salim Azzouz, Yu Guo, CharlesWatson, Midwestern State University, Wichita Falls, TX, UnitedStates

117. Three-Dimensional Full-Field Strain Mapping in TotalShoulder ReplacementPoster Presentation. IMECE2018-88902Yuxiao Zhou, Chujie Gong, Pennsylvania State University,State College, PA, United States, Gregory Lewis, AprilArmstrong, Pennsylvania State University, Hershey, PA, UnitedStates, Jing Du, Pennsylvania State University, State College,PA, United States

118. A Microfluidics-Based Impedimetric Platform forStudying Placental MalariaPoster Presentation. IMECE2018-88995Jia Liu, Irina Oleinikov, Olga Chesnokov, Yuhao Qiang,Andrew Oleinikov, Sarah E. Du, Florida Atlantic University,Boca Raton, FL, United States

119. Analysis of Precise-Drives for Bio-InstrumentationPoster Presentation. IMECE2018-88999Satya Prasad Paruchuru, VNRVJIET, Hyderabad, India

120. Unconventional Machining Methods forBioengineeringPoster Presentation. IMECE2018-89017Satya Prasad Paruchuru, VNRVJIET, Hyderabad, India

121. Manufacturing and Maintenance Aspects of ProcessesUsed for ProsthesesPoster Presentation. IMECE2018-89019Satya Prasad Paruchuru, VNRVJIET, Hyderabad, India


232

122. Manufacturing and Continuous-Evaluation of TissuePoster Presentation. IMECE2018-89078Satya Prasad Paruchuru, VNRVJIET, Hyderabad, India

123. Protective Capabilities of Metal-Frame Versus Plastic-Frame Softball Fielder’s MasksPoster Presentation. IMECE2018-89084John Strickland, Grant Bevill, University of North Florida,Jacksonville, FL, United States

124. Computational Modeling of Cough and MucusClearance in Patients With Total Laryngectomy UnderExpiratory Muscle Strenth TrainingPoster Presentation. IMECE2018-89086Nadun Kuruppumullage, University of Central Florida, Oviedo,FL, United States

125. Robust Control Design for Type 1 DiabetesPoster Presentation. IMECE2018-89246Souransu Nandi, University at Buffalo, State University of NewYork, Buffalo, NY, United States, Tarunraj Singh, University atBuffalo, State University of New York, Buffalo, NY, UnitedStates

126. Is Cell Alignment Modulated by Cell-Matrix Interactionor Cell-Cell Interaction?Poster Presentation. IMECE2018-89267Stephen Coyle, Philip R. LeDuc, Kuen Hsia, Carnegie MellonUniversity, Pittsburgh, PA, United States

127. Biological Inspiration From Salt-exclusion inMangroves Toward Anti-Biofouling Reverse OsmosisMembranesPoster Presentation. IMECE2018-89303Adam Wood, Carnegie Mellon University, Verona, PA, UnitedStates, Kyle Justus, Eric Parigoris, Alan Russell, Philip R.LeDuc, Carnegie Mellon University, Pittsburgh, PA, UnitedStates

128. In Situ Bioprinting of Bone Tissue Constructs forCraniomaxillofacial RepairPoster Presentation. IMECE2018-89380Kazim Kerim Moncal, Pennsylvania State University, StateCollege, PA, United States

129. 3D Tumor-on-a-Chip With Vasculature for ChemotaxisPoster Presentation. IMECE2018-89441Li Wan, Philip R. LeDuc, Carnegie Mellon University,Pittsburgh, PA, United States, Carola Neumann, University ofPittsburgh, Pittsburgh, PA, United States

130. Mechanically-Induced Cholesterol Removal FromMacrophage Cells Using UltrasoundPoster Presentation. IMECE2018-89498Justin Urso, Chandrakala Aluganti Narasimhulu, SampathParthasarathy, Alain Kassab, Subith Vasu, University ofCentral Florida, Orlando, FL, United States

131. A Nerve-Integrated 3D Tissue on a Chip System toStudy the BrainPoster Presentation. IMECE2018-89626Justin Bobo, Carnegie Mellon University, Pittsburgh, PA,United States, Manoj Puthenveedu, Zara Weinberg,University of Michigan, Ann Arbor, MI, United States, Philip R.LeDuc, Carnegie Mellon University, Pittsburgh, PA, UnitedStates

132. Optimization of Storage Conditions and Evaluation ofStored Drag Reducing Polymer (DRP) Solutions Used inPreclinical Animal StudiesPoster Presentation. IMECE2018-89806Dan Crompton, Sarah Tolaymat, Salim Olia, MarinaKameneva, University of Pittsburgh, Pittsburgh, PA, UnitedStates

133. Switching Super Twisting Sliding Mode Controller forFollowing Virtual Constraints: Application to a HybridNeuroprosthesisPoster Presentation. IMECE2018-89892Vahidreza Molazadeh, Zhiyu Sheng, Nitin Sharma, Universityof Pittsburgh, Pittsburgh, PA, United States

134. PhysioNet-LabView InterfacePoster Presentation. IMECE2018-89959Andrew-Dave E. Simpson, Douglas E. Dow, WentworthInstitute of Technology, Boston, MA, United States

16-5 DESIGN, RELIABILITY, SAFETY, ANDRISK16-5-1 Design, Reliability, Safety, and Risk

11:45am–2:30pm

135. Analysis of Temperature Sensor Failure Mechanism forSemiconductor Front-End Equipment Using Finite ElementModelsPoster Presentation. IMECE2018-89533Seung Il Park, Jacobs Somnic, Changwoon Han, StateUniversity of New York, Korea, Incheon, Korea (Republic)

136. Emerging Trends in the Measurement of EngineeredSurfaces in Aerospace and Weapons System From Roughto Nano Measurement RangePoster Presentation. IMECE2018-89983Devdas Shetty, Pawan Tyagi, University of the District ofColumbia, Washington, DC, United States


233

16-6 DYNAMICS, VIBRATION, ANDCONTROL16-6-1 Dynamics, Vibration, and Control

11:45am–2:30pm

137. Commodities and Rail DamagePoster Paper Publication. IMECE2018-86008Josè A. Romero, Queretaro Autonomous University, San Juandel Rio, Queretaro, Mexico, Frank Otremba, Bundesanstalt fürMaterialforschung und -prüfung, Berlin, Germany, Alejandro A.Lozano-Guzman, Applied Science and Advanced TechnologyResearch Center Queretaro Unit, Queretaro, Mexico

138. The Higher Inharmonic Overtone Vibrations of aPiezoelectric PlatePoster Presentation. IMECE2018-86622Zi-Gui Huang, National Formosa University, Yunlin County,Taiwan, Ke-Cheng Zhuang, Chien-Cheng Yang, TaitienElectronics Co., Ltd., New Taipei City, Taiwan

139. Vibratory System Identification of 3D PrintedCantileverPoster Paper Publication. IMECE2018-86840Daniel Crifasi, Matthew Ergle, Huseyin Ozdes, EdmonPerkins, Auburn University, Auburn, AL, United States

140. New Mixed Scheme for Rotor Blade Structural LoadCalculationPoster Presentation. IMECE2018-88916Jie Wu, Jiangsu University of Science & Technology, Zhenjiang,China

141. Payload Design for Orbital Structural HealthMonitoring ExperimentsPoster Presentation. IMECE2018-89430Arjun Tandon, Daniel Pacheco, Shane McKinney, MichaelUnderwood, Carl Bancroft, Douglas MacNinch, JohnSanchez, Andrei Zagrai, New Mexico Institute of Mining andTechnology, Socorro, NM, United States

142. Bio-Inspired High Aerodynamic Tail for RobotReorientation and StabilizationPoster Presentation. IMECE2018-89710Cameron Selby, Carnegie Mellon University, Pittsburgh, PA,United States, Amir Patel, Johns Hopkins University,Baltimore, MD, United States, Peter Li, Aaron Johnson,Carnegie Mellon University, Pittsburgh, PA, United States

143. Spring Mass Model Control for 3D Dynamic Runningon the ATRIAS BipedPoster Presentation. IMECE2018-89782Lin Song, William Martin, Hartmut Geyer, Carnegie MellonUniversity, Pittsburgh, PA, United States

16-7 ENGINEERING EDUCATION16-7-1 Engineering Education

11:45am–2:30pm

144. Design and Control of a High Precision Laser-CuttingMachinePoster Paper Publication. IMECE2018-88131Mason Van Bibber, Behnam Bahr, California StatePolytechnic University, Pomona, CA, United States

145. Experience of Multiple Instructors About StudentPresentation Based Teaching (SPET) ApproachPoster Paper Publication. IMECE2018-88410Pawan Tyagi, Morris Thomas, Carl Moore, PamelaHampton-Garland, Jiajun Xu, Lara Thompson, SasanHaghani, University of the District of Columbia, Washington,DC, United States

146. Student Presentation Based Teaching (SPET)Approach for Classes With Higher EnrollmentPoster Paper Publication. IMECE2018-88463Pawan Tyagi, University of the District of Columbia,Washington, DC, United States

147. A Portable Laboratory for Dynamic Systems andControlsPoster Presentation. IMECE2018-89494Xiaorui Li, Carnegie Mellon University, Pittsburgh, PA, UnitedStates, Mark Bedillion, Carnegie Mellon University, Gibsonia,PA, United States

148. Use of Advanced Manufacturing for Better ToolingPerformance in the Capstone ExperiencePoster Presentation. IMECE2018-89729Hazel Marie, Youngstown State University, Boardman, OH,United States, Stefan Moldovan, Youngstown State University,Youngstown, OH, United States

16-8 ENERGY16-8-1 Energy

11:45am–2:30pm

149. Optimization of Hot Side Housing Component for aRotary Displacer Stirling EnginePoster Presentation. IMECE2018-87981William C. Mullins, Amirhossein Bagheri, Phillip R. Foster,Huseyin Bostanci, University of North Texas, Denton, TX,United States

150. Conductive Heating of Li-Ion Batteries at LowTemperaturesPoster Paper Publication. IMECE2018-88235Zhibang Xu, Meng Xu, Xia Wang, Peng Zhao, OaklandUniversity, Rochester Hills, MI, United States


234

151. Development of a Self-Sustaining Water DistillationSystem Using Activated Carbon NanofluidsPoster Presentation. IMECE2018-88756Ashreet Mishra, Purdue University Northwest, Hammond, IN,United States, A.G. Agwu Nnanna, University of Texas of thePermian Basin, Odessa, TX, United States

152. Rack Level Cooling of a Dynamic Cold Plate Using SelfRegulating Flow Control DevicePoster Presentation. IMECE2018-88832Amrutha Rachakonda, Rajesh Kasukurthy, DerejeAgonafer, University of Texas at Arlington, Arlington, TX,United States

153. Influence of the Tilt Angle of All-Glass Vacuum TubeCollectors on the Thermal Performance of Tube SolarWater HeatersPoster Presentation. IMECE2018-88985Elder Mendoza, Universidad Nacional de Trujillo, Trujillo, Peru

154. Performance Improvement of Cathode Electrodes inLithium Ion Batteries by Nanoscale Surface Engineering viaChemical Vapor Deposition PolymerizationPoster Presentation. IMECE2018-89113Laisuo Su, Phil M. Smith, B. Reeja-Jayan, Carnegie MellonUniversity, Pittsburgh, PA, United States

155. Numerical and Experimental Investigation of Effects ofMetal Foam on the Melting of PCM Inside a HorizontalCylinderPoster Presentation. IMECE2018-89114Saurabh Mali, Subrata Sengupta, Suvil C. Kundapur,Abhishek Mangoli, University of Michigan Dearborn,Dearborn, MI, United States

156. Practical Benefit Analysis of Heat Recovery for Multi-Stage Air CompressorsPoster Presentation. IMECE2018-89160Yiming Ma, Yi Chu, FS-Elliott CN Co., Shanghai, China,Rongxin Zhang, Brad Hayes, FS-Elliott LLC, Export, PA,United States, Xuyang Chi, FS-Elliott CN Co., Shanghai,Shanghai, China

157. A Novel Method to Store Thermal Energy in a BTESSystemPoster Presentation. IMECE2018-89275Seung Joo Lee, Sarng Woo Karng, Jinsoo Park, KoreaInstitute of Science and Technology, Seoungbook-gu, Seoul,Korea (Republic), Sungho Choi, Syngkyunkwan University,Suwon, Korea (Republic)

158. Analysis of Cytochrome C Oxidase Oxygen ReductionReaction to Develop a Catalyst for Hydrogen Fuel CellsPoster Presentation. IMECE2018-89333Rudy Torres, Philip R. LeDuc, Carnegie Mellon University,Pittsburgh, PA, United States

159. New Decal Transfer Method for the Fabrication ofPGM-Free Polymer Electrolyte Fuel CellPoster Presentation. IMECE2018-89375Yuqi Guo, Leiming Hu, Aman Uddin, Carnegie MellonUniversity, Pittsburgh, PA, United States, Hanguang Zhang,Gang Wu, University at Buffalo, State University of New York,Buffalo, NY, United States, Shawn Litster, Carnegie MellonUniversity, Pittsburgh, PA, United States

160. Influence of Ionomer on Platinum Group Metal-FreeCatalyst Activity as Evaluated by Rotating Disk ElectrodeMeasurementsPoster Presentation. IMECE2018-89422Xiaomin Xu, Aman Uddin, Jonathan Braaten, CarnegieMellon University, Pittsburgh, PA, United States, HanguangZhang, Gang Wu, University at Buffalo, State University ofNew York, Buffalo, NY, United States, Shawn Litster, CarnegieMellon University, Pittsburgh, PA, United States

161. In-Operando Imaging of Copper Dendrites GrowthBased on Planar Micro-cell Using Ultra-High Resolution X-ray Computed TomographyPoster Presentation. IMECE2018-89462Hanwei Zhou, Tianwen Chen, Paul Choi, BharathyParimalam, Yubai Li, Shawn Litster, Carnegie MellonUniversity, Pittsburgh, PA, United States

162. Design of a Borehole Thermal Energy Storage SystemPoster Presentation. IMECE2018-89474Sarng Woo Karng, Jinsoo Park, Seung Joo Lee, KoreaInstitute of Science and Technology, Seoul, Seoul, Korea(Republic)

163. CFD Study of the Dual Vertical Axis Wind TurbinePoster Presentation. IMECE2018-89571Shreyas P. Shetty, Manipal Academy of Higher Education,Hyderabad, Telangana, India

164. Carbon-Based Nanomaterials for Surface Propertiesand Energy StoragePoster Presentation. IMECE2018-89573Ziyu Zhou, Tongchuan Gao, Paul Leu, University ofPittsburgh, Pittsburgh, PA, United States

165. Hardware and Software Development for Telemetry-Intensive Solar ForecastingPoster Presentation. IMECE2018-89846Hugo T.C. Pedro, David Larson, Jeremy Orosco, Universityof California San Diego, La Jolla, CA, United States, Carlos Coimbra, University of California, San Diego,San Diego, CA, United States

166. Direct Spectral Estimation of Cloud Optical PropertiesFrom GOES-R ImageryPoster Presentation. IMECE2018-89853David Larson, Mengying Li, Hugo T.C. Pedro, University of California, San Diego, La Jolla, CA, United States,Carlos Coimbra, University of California, San Diego, San Diego, CA, United States


235

167. Transition Metal Dichalcogenides (TMDs) forApplication as Supercapacitor ElectrodesPoster Presentation. IMECE2018-89877Kennith Mcloud, Jonathan Turnley, Santanu Mukherjee,Zhongkan Ren, Gurpreet Singh, Kansas State University,Manhattan, KS, United States

168. Optimization of Nano-Texturing Parameters toMaximize the Light Trapping of Thin Film Solar CellsPoster Presentation. IMECE2018-90019Ola Rashwan, Pennsylvania State University, Middletown, PA,United States, Nur Khairina Khairu Najhan, Andrew Newill,Pennsylvania State - Harrisburg, Middletown, PA, United States

16-9 FLUIDS ENGINEERING16-9-1 Fluids Engineering

11:45am–2:30pm

169. Modeling and Simulation of Laser Fabrication ofMicrofluidic ChannelsPoster Presentation. IMECE2018-86951Mohammad Hossan, Matthew Benton, Haley Allen,Abdellah Ait Moussa, University of Central Oklahoma,Edmond, OK, United States

170. Experimental Facility Design for Air-Water Two PhaseFlow Phenomena Measurement in Research ReactorCooling SystemPoster Presentation. IMECE2018-87308Ki-Jung Park, Minkyu Jung, Kyoungwoo Seo, Seong HoonKim, Korea Atomic Energy Research Institute, Daejeon, Korea(Republic)

171. Numerical Examination of Jets Induced by Multi-Bubble InteractionsPoster Paper Publication. IMECE2018-87606Joydip Mondal, Arpit Mishra, Rajaram Lakkaraju,Parthasarathi Ghosh, Indian Institute of TechnologyKharagpur, Kharagpur, West Bengal, India

172. Proper Orthogonal Decomposition Applied to aConvergent Shock Wave Dynamically Interacting With aCylindrical Density InterfacePoster Presentation. IMECE2018-88175Erik Proano, Dongeun Seo, Bertrand Rollin, Embry-RiddleAeronautical University, Daytona Beach, FL, United States

173. Droplet Nucleation and Growth in CryogenicTurboexpandersPoster Paper Publication. IMECE2018-88343Ashish Alex Sam, Keerthi Raj Kunniyoor, JayachandranK.N., Arpit Mishra, Parthasarathi Ghosh, Indian Institute ofTechnology Kharagpur, Kharagpur, West Bengal, India

174. Numerical Analysis of Heat Transfer and Fluid Flow inMicro-Welding Using CFDPoster Paper Publication. IMECE2018-86363Divyaj Shah, Indian Institute of Technology, Bombay, Pune,Maharashtra, India, Chandrashekhar M. Sewatkar, College ofEngineering, Pune, Pune, Maharashtra, India, Ketaki Godbole,Bajaj Auto Ltd., Pune, Pune, Maharashtra, India

16-10 HEAT TRANSFER AND THERMALENGINEERING16-10-1 Heat Transfer and Thermal Engineering

11:45am–2:30pm

175. Realization of Energy-Saving Glass Using PhotonicCrystalsPoster Presentation. IMECE2018-86185Yen-Hsiang Chen, Yu-bin Chen, National Tsing HuaUniversity, Hsinchu City, Taiwan

176. Experimental Studies of Enhanced Tubes for FloodedEvaporator Using R-1233zd(E) RefrigerantPoster Presentation. IMECE2018-86265Ho Won Byun, Dong Ho Kim, Seok Ho Yoon, Chan Ho Song,Kong Hoon Lee, Ook Joong Kim, Korea Institute ofMachinery and Materials, Daejeon, Korea (Republic)

177. Numerical and Experimental Investigations ofCombustion and NOx Emission Characteristics of a 330MWUtility Boiler With Swirl BurnersPoster Presentation. IMECE2018-86777Wenhua Liu, Mo Yang, University of Shanghai for Science andTechnology, Shanghai, China, Yuwen Zhang, Zheng Li,University of Missouri, Columbia, MO, United States, HongJin, Wenshuai Wang, University of Shanghai for Science andTechnology, Shanghai, China

178. Quantifying Uncertainty in First-Principles Predictionsof Phonon Dispersion RelationsPoster Presentation. IMECE2018-87933Holden Parks, Venkat Viswanathan, Alan McGaughey,Carnegie Mellon University, Pittsburgh, PA, United States

179. Visualization of Nanoengineered Coating LongevityDuring CondensationPoster Presentation. IMECE2018-88077Muhammad Jahidul Hoque, Longnan Li, Nenad Miljkovic,University of Illinois at Urbana-Champaign, Urbana, IL, UnitedStates

180. Individual Phonon Branch Contribution to ThermalConductivity of 3C-SiC Using the Monte Carlo MethodPoster Paper Publication. IMECE2018-88083Arden Barnes, Nicholas Roberts, Utah State University,Logan, UT, United States


236

181. Flow and Heat Transfer of Mist/Steam Two-PhaseFlow in Two-Pass Rectangular Channels With Paralleledand V-Shaped Rib TurbulatorsPoster Paper Publication. IMECE2018-88532Guangwen Jiang, Jianmin Gao, Xiaojun Shi, Xi’an JiaotongUniversity, Xi’an, Shaanxi, China, Zhao Wang, Yunlong Li,State Key Laboratory for Manufacturing Systems Engineering,Xi’an Jiaotong University, Xi’an, China

182. Experimental Investigation of an R134a LoopThermosiphon for Shaft CoolingPoster Paper Publication. IMECE2018-88548Fajing Li, Jianmin Gao, Xi’an Jiaotong University, Xi’an,Shanxi, China, Liang Xu, State Key Laboratory forManufacturing Systems Engineering, Xi’an Jiaotong University,Xi’an, Shaanxi, China, Feng Liang, Xi’an Jiaotong University,Xi’an, Shaanxi, China, Guangwei Jiang, State Key Laboratoryfor Manufacturing Systems Engineering, Xi’an JiaotongUniversity, Xi’an, Shaanxi, China

183. Investigation of Cure process of Carbon EpoxyComposite BlockPoster Presentation. IMECE2018-88758Kibum Kim, JinSang Yoon, Chungbuk National University,Cheoungju, Korea (Republic)

184. Total Variation Regularization for Temperature FieldReconstruction Based on the Light-Field ImagingTechniquePoster Presentation. IMECE2018-88786Xing Huang, Hong Qi, Xiang-Yang An, Li-Ming Ruan, HarbinInstitute of Technology, Harbin, China

185. The Origin of Hydrophilic Surface Functionalization-Induced Thermal Conductance Enhancement AcrossSolid-Water InterfacesPoster Presentation. IMECE2018-89075Dezhao Huang, Ruimin Ma, University of Notre Dame, SouthBend, IN, United States, Teng Zhang, Schrodinger Inc., NewYork, NY, United States, Tengfei Luo, University of NotreDame, Notre Dame, IN, United States

186. Thermal Transport of Fullerene-Based SuperatomicCrystals Controlled by Orientational DisorderPoster Presentation. IMECE2018-89253Matthew Bartnof, Alexander D. Christodoulides, CarnegieMellon University, Pittsburgh, PA, United States, Wee-LiatOng, Zhejiang University, Haining, Zhejiang, China, EvanO’Brien, Xavier Roy, Columbia University, New York, NY,United States, Alan McGaughey, Jonathan Malen, CarnegieMellon University, Pittsburgh, PA, United States

187. The Effect of Adhesion Layer on the Thermal BoundaryConductancePoster Presentation. IMECE2018-89406Kiumars Aryana, Rouzbeh Rastgar, David Olson, JohnGaskins, Ashutosh Giri, Pamela M. Norris, Patrick E.Hopkins, University of Virginia, Charlottesville, VA, UnitedStates

188. Nanoscale to Megascale Thermal Engineering: A Pathto Sustainable EnergyPoster Presentation. IMECE2018-89715Bikram Bhatia, Massachusetts Institute of Technology,Cambridge, MA, United States

189. Metal Sulfides for Thermochemical Energy StoragePoster Presentation. IMECE2018-89779Gwendolyn Wang, University of California, San Diego, SanDiego, CA, United States

190. Heterogeneous Monolayer Wick Structures for HighHeat Flux Thermal Management SystemsPoster Presentation. IMECE2018-89957Nathan Albu, Athul J. Pai, Gisuk Hwang, Wichita StateUniversity, Wichita, KS, United States

191. Enhanced Flow Boiling Using Columnar-Post WickPoster Presentation. IMECE2018-89971Athul J. Pai, Yahya Nasersharifi, Gisuk Hwang, Wichita StateUniversity, Wichita, KS, United States

192. Advanced Passive Thermal Management of Li-IonBatteries Operating at Various Environmental TemperaturesPoster Presentation. IMECE2018-89999Derek Barnes, Xianglin Li, University of Kansas, Lawrence,KS, United States

16-11 MATERIALS: GENETICS TOSTRUCTURES16-11-1 Materials: Genetics to Structures

11:45am–2:30pm

193. Metal-Organic-Frameworks as EfficientElectrocatalysts for Oxygen Evolution Reaction: InsightsInto the Active CentersPoster Presentation. IMECE2018-86176Chun-Yu Lin, University of North Texas, Denton, TX, UnitedStates, Shuangyin Wang, Hunan University, Changsha, China,Zhenhai Xia, University of North Texas, Denton, TX, UnitedStates

194. Molecular Dynamics Simulation for Dislocation onLead Titanate FilmsPoster Presentation. IMECE2018-86882Cooper Gray, Razak Adeniji, Zhi Wang, University of St.Thomas, St. Paul, MN, United States, Jeong Ho You,University of St. Thomas, Woodbury, MN, United States

195. First-Principle Investigation of Structural, Elastic,Electronic and Thermal Properties of Dysprosium HafnateOxidesPoster Paper Publication. IMECE2018-87099Hui Niu, Ansys Inc., Canonsburg, PA, United States


237

196. Effect of Nano Silica on Compressive Strength ofConcretePoster Paper Publication. IMECE2018-87799Waleed Ahmed, United Arab Emirates University, Al Ain,United Arab Emir., Wail Al-Rifaie, Abdalmjeed Alawaneh,Mohammed Al-Bajawi, Philadelphia University, Amman,Jordan

197. Study of Buckling of Plate Under Shear ComparedUnder Compression ResultsPoster Presentation. IMECE2018-87986Sadek Salem Cherif, University of Sciences and Technologyof Oran Mohamed Boudiaf, Tizi-Ouzou, Algeria

198. Effect of Stress Triaxiality on Creep Deformation andDamage in Mod.9Cr-1Mo SteelPoster Presentation. IMECE2018-88957Katsutaka Yamada, Chiba Institute of Technology, Funabashi,Chiba, Japan, Takashi Ogata, Chiba Institute of Technology,Chiba, Japan

199. Creep Strength Evaluation of Long-Term Used WeldedJoint on Mod.9Cr-1Mo Steel by Using a MiniatureSpecimenPoster Presentation. IMECE2018-89002Hiroki Yamazaki, Chiba Institute of Technology, Narashino,Japan, Takashi Ogata, Chiba Institute of Technology, Chiba,Japan

200. Investigation of Mechanical Strength of Gallium BasedAlloysPoster Presentation. IMECE2018-89094Courtney Titus, Stephen P. Stagon, University of NorthFlorida, Jacksonville, FL, United States

201. Crack Paths in Anisotropic Biomimetic CompositesTextured by Magnetic NanoparticlesPoster Presentation. IMECE2018-89964Chunzhou Pan, Ata Mesgarnejad, Sandra Shefelbine, Alain Karma, Randall Erb, Northeastern University, Boston,MA, United States

16-12 MECHANICS OF SOLIDS,STRUCTURES AND FLUIDS16-12-1 Mechanics of Solids, Structures and Fluids

11:45am–2:30pm

202. Experimental Investigation on Dynamic FractureBehavior of 5A06 Aluminum AlloyPoster Presentation. IMECE2018-88879Peng Ren, Jiangsu University of Science & Technology,Zhenjiang, China

203. Development of a Moving Window MolecularDynamics Framework to Model Shock Wave Interaction at Microstructural FeaturesPoster Presentation. IMECE2018-89306Alexander Davis, Vinamra Agrawal, Auburn University,Auburn, AL, United States

204. Mesoscopic Modelling of Carbon Nanotube Thin FilmsWith Covalent Cross-LinksPoster Presentation. IMECE2018-89373Md. Abu Horaira Banna, Alexey Volkov, University ofAlabama, Tuscaloosa, AL, United States

205. Modifying the Mechanical Response of a ColdDrawing Polymer Film by the Addition of a PerfectlyBonded Hyperelastic LayerPoster Presentation. IMECE2018-89377Rahul Gopalan Ramachandran, Hariharakrishnan S.,Steven D. Abramowitch, Spandan Maiti, Sachin S. Velankar,University of Pittsburgh, Pittsburgh, PA, United States

206. Simple Model for Tool Interaction on a ContinuouslyDeformable EnvironmentPoster Presentation. IMECE2018-89452Wooshik Kim, Aaron Johnson, Carnegie Mellon University,Pittsburgh, PA, United States

207. Computational Modeling of Electrically ActuatedShape Memory PolymersPoster Presentation. IMECE2018-89927Midhan Siwakoti, Russell Mailen, Auburn University, Auburn,AL, United States

16-13 SOCIETY-WIDE MICRO ANDNANOTECHNOLOGY FORUM16-13-1 Society-Wide Micro and NanotechnologyForum

11:45am–2:30pm

208. Systematic Analysis of Pattern Precision andUniformity in Roll-to-Roll Colloidal Assembly SystemPoster Presentation. IMECE2018-88840I-Te Chen, Elizabeth Schappell, Xiaolong Zhang, Chih-HaoChang, North Carolina State University, Raleigh, NC, UnitedStates

209. Tensile Properties of P3HT:PCBM Bulk-heterojunctionThin Films by Coarse-Grained Molecular DynamicsPoster Presentation. IMECE2018-88872Joydeep Munshi, Ganesh Balasubramanian, LehighUniversity, Bethlehem, PA, United States

210. Role of Processing on the Morphology of P3HT:PCBMBulk-Heterojunction Thin Films by Coarse-grainedMolecular SimulationsPoster Presentation. IMECE2018-88873Joydeep Munshi, Lehigh University, Bethlehem, PA, UnitedStates, Umar Farooq Ghumman, Akshay Iyer, NorthwesternUniversity, Evanston, IL, United States, Rabindra Dulal,University of Wyoming, Laramie, WY, United States, Wei Chen,Northwestern University, Evanston, IL, United States, TeYuChien, University of Wyoming, Laramie, WY, United States,Ganesh Balasubramanian, Lehigh University, Bethlehem, PA,United States


238

211. Role of Polydispersity on the Morphology ofP3HT:PCBM Organic Solar Cells by Coarse-GrainedMolecular SimulationsPoster Presentation. IMECE2018-88874Joydeep Munshi, Lehigh University, Bethlehem, PA, UnitedStates, Umar Farooq Ghumman, Akshay Iyer, NorthwesternUniversity, Evanston, IL, United States, Rabindra Dulal,University of Wyoming, Laramie, WY, United States, Wei Chen,Northwestern University, Evanston, IL, United States, TeYuChien, University of Wyoming, Laramie, WY, United States,Ganesh Balasubramanian, Lehigh University, Bethlehem, PA,United States

212. Large-Scale Dynamic Energy Driven Assembly of Two-Dimensional Layered Materials on Polymer SubstratePoster Presentation. IMECE2018-88882Dong Zhou, Bo Li, Villanova University, Villanova, PA, UnitedStates

213. Magnetically Actuated Dynamic Iridescence Inspiredby the Neon TetraPoster Presentation. IMECE2018-88898Zhiren Luo, North Carolina State University, Raleigh, NC,United States, Benjamin Evans, Elon University, Elon, NC,United States, Chih-Hao Chang, North Carolina StateUniversity, Raleigh, NC, United States

214. The Stability and Diffusion of Lithium Affected by a 60°Shuffle Dislocation in SiliconPoster Presentation. IMECE2018-88923Wei Zhao, Jiangsu University of Science and Technology, ZhenJiang, China

215. Heat Transfer Across 3C-SiC-Water Interfaces: Solid-Liquid Affinity, Interfacial Structuring, and SpectralCharacteristicsPoster Presentation. IMECE2018-88943C. Ulises Gonzalez-Valle, Pennsylvania State University, StateCollege, PA, United States, Bladimir Ramos, PennsylvaniaState University, University Park, PA, United States

216. Determining Influential Descriptors for Polymer ChainConformation Based on Empirical Force-Fields andMolecular Dynamics SimulationsPoster Presentation. IMECE2018-88958Ruimin Ma, University of Notre Dame, South Bend, IN, UnitedStates, Tengfei Luo, University of Notre Dame, Notre Dame,IN, United States

217. Multiscale Modeling of PEEK Using ReactiveMolecular Dynamics Modeling and MicromechanicsPoster Presentation. IMECE2018-88967Will Pisani, Matthew Radue, Michigan TechnologicalUniversity, Houghton, MI, United States, SorayotChinkanjanarot, National Metals and Materials TechnologyCenter, Khlong Nueng, Pathum Thani, Thailand, Brett A.Bednarcyk, Evan Pineda, NASA Glenn Research Center,Cleveland, OH, United States, Kevin Waters, RavindraPandey, Julie King, Gregory Odegard, MichiganTechnological University, Houghton, MI, United States

218. Demonstration of the Magnetic Polaritons in Deep AlGratings in Off-Plane LayoutTechnical Presentation. IMECE2018-88977Peiyan Yang, Zhuomin Zhang, Georgia Institute ofTechnology, Atlanta, GA, United States, Hong Ye, University ofScience and Technology of China, Hefei, China

219. Achieving Low Lattice Thermal Conductivity byStereochemically Activating Lone-Pair Electrons: A CaseStudy of Boron ArsenideTechnical Presentation. IMECE2018-89003Guangzhao Qin, University of South Carolina, Columbia, SC,United States, Zhenzhen Qin, Zhengzhou University,Zhengzhou, Henan, China, Huimin Wang, NortheasternUniversity, Shenyang, Liaoning, China, Ming Hu, University ofSouth Carolina, Columbia, SC, United States

220. External Electric Field Driving the Ultra-Low ThermalConductivity of SiliceneTechnical Presentation. IMECE2018-89004Guangzhao Qin, Ming Hu, University of South Carolina,Columbia, SC, United States

221. A Modified Theoretical Model to Accurately Accountfor Interfacial Roughness in Predicting the InterfacialThermal ConductancePoster Presentation. IMECE2018-89040Yingying Zhang, University of Minnesota, St. Paul, MN, UnitedStates, Dengke Ma, Yi Zang, Huazhong University of Scienceand Technology, Wuhan, China, Xiaojia Wang, University ofMinnesota, Minneapolis, MN, United States, Nuo Yang,Huazhong University of Science and Technology, Wuhan,Hubei, China

222. Thermal Transport in ZnO Nanocrystal NetworksSynthesized by Nonthermal PlasmaPoster Presentation. IMECE2018-89041Xuewang Wu, Ben Greenberg, University of Minnesota,Minneapolis, MN, United States, Yingying Zhang, University ofMinnesota, St. Paul, MN, United States, Uwe Kortshagen,James Kakalios, Eray S. Aydil, Xiaojia Wang, University ofMinnesota, Minneapolis, MN, United States

223. Enhancing Light Transmission in Nacre-InspiredMultilayer Composites Using Interfacial NanostructuresPoster Presentation. IMECE2018-89093Yi-An Chen, Chih-Hao Chang, North Carolina StateUniversity, Raleigh, NC, United States, Sharan/S.V. Naidu,GlobalFoundries, Raleigh, NC, United States, Zhiren Luo,North Carolina State University, Raleigh, NC, United States

224. Failure Prediction Using Gibbs Formulation of GranularMicromechanicsPoster Presentation. IMECE2018-89208Anil Misra, Rizacan Sarikaya, University of Kansas,Lawrence, KS, United States, Payam Poorsolhjouy, PurdueUniversity, West Lafayette, IN, United States


239

225. Tunable Near-Field Radiative Heat Transfer byElectrically Gating Monolayer GraphenePoster Presentation. IMECE2018-89214Xiaoyan Ying, Liping Wang, Arizona State University, Tempe,AZ, United States

226. Thermochromic VO2-Based Variable EmittanceCoatings for Spacecraft Thermal ControlPoster Presentation. IMECE2018-89217Sydney Taylor, Liping Wang, Arizona State University, Tempe,AZ, United States

227. Combined Effects of Liquid Wicking andHydrodynamic Instability on Pool Boiling Critical Heat Fluxby Two-Tier Structures of Nanowires and MicrogroovesPoster Presentation. IMECE2018-89226Guanglei Chen, Calvin Hong Li, Villanova University,Villanova, PA, United States

228. Local Measurement of the Evaporative Heat TransferCoefficient in Thin Films Using Frequency DomainThermoreflectancePoster Presentation. IMECE2018-89250Xiaoman Wang, Xiaoyue Zhao, Alan McGaughey, JonathanMalen, Carnegie Mellon University, Pittsburgh, PA, UnitedStates

229. Synthesis and Characterization of ElectrodepositedNi-Co Core-Shell NanowiresPoster Presentation. IMECE2018-89321Ali Shiave, University of North Carolina at Greensboro,Greensboro, NC, United States, Ram Mohan, North CarolinaA&T University, Greensboro, NC, United States

230. Additive Manufacturing of Multi-Material MicroStructural Features—Comparison of Print Part Quality andCharacteristics From Voxel and Stereolithography DigitalDesignsPoster Presentation. IMECE2018-89332Furkan Ulu, Ravi Pratap Singh Tomar, Ram Mohan, NorthCarolina A&T University, Greensboro, NC, United States

231. Additive Manufacturing Aids the Verification ofGranular Micromechanics ModelPoster Presentation. IMECE2018-89340Nima Nejadsadeghi, Anil Misra, University of Kansas,Lawrence, KS, United States

232. Tunable Granular Metamaterials Based Upon WavePropagation Analysis Using Granular MicromechanicsPoster Presentation. IMECE2018-89342Nima Nejadsadeghi, Anil Misra, University of Kansas,Lawrence, KS, United States

233. Experimental Measurement of the Spectrum of Near-Field Thermal EmissionPoster Presentation. IMECE2018-89369Saman Zare, Carl Tripp, Sheila Edalatpour, University ofMaine, Orono, ME, United States

234. Wavevector and Polarization Resolved Analysis ofPhonon Scattering From Embedded NanoparticlesTechnical Presentation. IMECE2018-89410Rohit Kakodkar, Joseph P. Feser, University of Delaware,Newark, DE, United States

235. Thermal Transport Across Gallium Oxide/MetalInterfacesPoster Presentation. IMECE2018-89509Henry Aller, Alan McGaughey, Jonathan Malen, AndrewGellman, Xiaoxiao Yu, Carnegie Mellon University, Pittsburgh,PA, United States

236. Microfluidics to Study Multiscale PorosityPoster Presentation. IMECE2018-89559Mohammad Mehdi Salek, ETH Zurich, Zurich, Switzerland,Jiande Zhou, EPFL, Lausanne, Switzerland, Roman Stocker,Joaquin Jimenez-Martinez, ETH Zurich, Zurich, Switzerland

237. Mechanical and Electrostatic Properties of SyntheticCollagen Molecules via Molecular Dynamics ModelingPoster Presentation. IMECE2018-89568Atul Rawal, Kristen Rhinehardt, Ram Mohan, North CarolinaA&T University, Greensboro, NC, United States

238. Laser-Induced Surface Treatment of PMMA forCapillary Driven FlowsPoster Presentation. IMECE2018-89601Md. Shamim Mahmud, Bahador Farshchian, Texas StateUniversity, San Marcos, TX, United States, Hakjin Kim,Convert, Chuncheon, Korea (Republic), Hyunghoon Kim,Boditech Med, Chuncheon, Korea (Republic), HeonyoungKim, Kangwon National University, Chuncheon, Korea(Republic), Namwon Kim, Texas State University, San Marcos,TX, United States

239. Mechanical Behavior of Cement Paste at Nanoscale—Experimental Characterization and Reactive MolecularDynamics ModelingPoster Presentation. IMECE2018-89606Ingrid Padilla Espinosa, Ram Mohan, North Carolina A&TUniversity, Greensboro, NC, United States

240. Suspended Thermo-Reflectance Measurements of theThermal Properties of Silicon Micro- and Nano-CantileverBeamsPoster Presentation. IMECE2018-89657Dipta Sarkar, Zayd Leseman, Kansas State University,Manhattan, KS, United States

241. Deformable Shallow Microfluidics: Fluid FlowRectification and Novel Particle Manipulation PlatformPoster Presentation. IMECE2018-89661Aryan Mehboudi, Junghoon Yeom, Michigan State University,East Lansing, MI, United States

242. Tailoring the Property of Nanocomposites Using NickelCoated Carbon Nanotube and magnetic FieldPoster Presentation. IMECE2018-89678Ahmed M. Abdalla, Rakesh Sahu, Ishwar K. Puri, McMasterUniversity, Hamilton, ON, Canada


240

243. In Situ Contactless 3D Printing of Cellular StructuresPoster Presentation. IMECE2018-89701Sarah Mishriki, Abdel Rahman Abdel Fattah, Elvira Meleca,McMaster University, Hamilton, ON, Canada, TobiasKammann, Friedrich Schiller University Jena, Jena, Germany,Rakesh Sahu, Fei Geng, Ishwar K. Puri, McMaster University,Hamilton, ON, Canada

244. Magnetic Antibody Functionalized Carbon NanotubeInk for Rapid Printing of BiosensorsPoster Presentation. IMECE2018-89703Sarah Mishriki, Abdel Rahman Abdel Fattah, Ahmed M.Abdalla, Elvira Meleca, Fei Geng, Suvojit Ghosh, Ishwar K.Puri, McMaster University, Hamilton, ON, Canada

245. Energy Efficient Metal Mesh Fog Filters toSimultaneously Harness Atmospheric Fog-Water andRemove VOCsPoster Presentation. IMECE2018-89736Ritwick Ghosh, Rakesh Sahu, Igor Zhitomirsky, McMasterUniversity, Hamilton, ON, Canada, Ranjan Ganguly, JadavpurUniversity, Kolkata, West Bengal, India, Ishwar K. Puri,McMaster University, Hamilton, ON, Canada

246. Spatial Mapping and Analysis of Thermal BoundaryConductance of Metal–MoSe2 Interfaces Using Time-Domain ThermoreflectancePoster Presentation. IMECE2018-89754David B. Brown, Georgia Institute of Technology, Atlanta, GA,United States, Xufan Li, Kai Xiao, David B. Geohegan, OakRidge National Laboratory, Oak Ridge, TN, United States,Satish Kumar, Georgia Institute of Technology, Atlanta, GA,United States

247. Hundred-Fold Enhancement in Far-Field RadiativeHeat Transfer Over the Blackbody LimitPoster Presentation. IMECE2018-89796Dakotah Thompson, Linxiao Zhu, Rohith Mittapally, SeidSadat, University of Michigan, Ann Arbor, MI, United States,Zhen Xing, Patrick McArdle, Mumtaz Qazilbash, College ofWilliam and Mary, Williamsburg, VA, United States, PramodSangi Reddy, Edgar Meyhofer, University of Michigan, AnnArbor, MI, United States

248. Advanced FeOOH-MWCNTS Composite NegativeElectrodes With High Areal Capacitance for AsymetricSupercapacitorsPoster Presentation. IMECE2018-89817Ri Chen, Rakesh Sahu, Igor Zhitomirsky, Ishwar K. Puri,McMaster University, Hamilton, ON, Canada

249. Conversion of Heat to Electricity Using a Nano GapNear-Field Thermophotovoltaic DevicePoster Presentation. IMECE2018-89852Linxiao Zhu, Anthony Fiorino, Dakotah Thompson, RohithMittapally, Pramod Sangi Reddy, Edgar Meyhofer, Universityof Michigan, Ann Arbor, MI, United States

250. Transient Thermoreflectance Techniques forMeasuring Thermal ConductivityPoster Presentation. IMECE2018-89886Jihoon Jeong, Yaguo Wang, University of Texas at Austin,Austin, TX, United States

251. Comparison of Friction in Graphene WrappedNanodiamond and Graphitized NanodiamondPoster Presentation. IMECE2018-89914Srilok Srinivasan, Iowa State University, Ames, IA, UnitedStates, Diana Berman, University of North Texas, Denton, TX,United States, Ganesh Balasubramanian, Lehigh University,Bethlehem, PA, United States, Subramanian K.R.S.Sankaranarayanan, Argonne National Laboratory, Lemont, IL,United States, Ali Erdemir, Argonne National Laboratory,Argonne, IL, United States, Anirudha Sumant, ArgonneNational Laboratory, Lemont, IL, United States

252. Thermal Conductivity of Ga Doped Crystalline Si UsingMolecular DynamicsPoster Presentation. IMECE2018-89939Srilok Srinivasan, Iowa State University, Ames, IA, UnitedStates, Ganesh Balasubramanian, Lehigh University,Bethlehem, PA, United States, Zayd Leseman, Kansas StateUniversity, Manhattan, KS, United States

253. Atomistic Modeling of Wetting and Evaporation onNanostructured Printed GraphenePoster Presentation. IMECE2018-89963Srilok Srinivasan, Iowa State University, Ames, IA, UnitedStates, Ganesh Balasubramanian, Lehigh University,Bethlehem, PA, United States, Suprem Das, Kansas StateUniversity, Manhattan, KS, United States

254. Heat Transport Mechanism in 2D Hybrid PerovskitePoster Presentation. IMECE2018-89972Md. Abu Jafar Rasel, Joseph P. Feser, University ofDelaware, Newark, DE, United States

16-14 BEST STUDENT POSTERCOMPETITION ON COMPUTATIONALMECHANICS16-14-1 Best Student Poster Competition onComputational Mechanics

11:45am–2:30pm

255. Peridynamic Modeling of Intergranular CorrosionDamagePoster Presentation. IMECE2018-86735Siavash Jafarzadeh, University of Nebraska–Lincoln, Lincoln,NE, United States, Ziguang Chen, Huazhong University ofScience and Technology, Wuhan, Hubei, China, Florin Bobaru,University of Nebraska–Lincoln, Lincoln, NE, United States


241

256. Dynamic Fracture at an Interface: A PeridynamicAnalysisPoster Presentation. IMECE2018-86936Javad Mehrmashhadi, Quang Le, Florin Bobaru, Universityof Nebraska–Lincoln, Lincoln, NE, United States

257. Sharp Volumetric Billboard Based Multilevel MultigridMethodPoster Presentation. IMECE2018-88073Dewen Yushu, Karel Matouš, University of Notre Dame, Notre Dame, IN, United States

258. Peridynamic Modelling of Crack NucleationPoster Presentation. IMECE2018-88164Sina Niazi, Florin Bobaru, University of Nebraska–Lincoln,Lincoln, NE, United States

259. The Peridynamic Coupling of Fracture, Diffusion, andCorrosionPoster Presentation. IMECE2018-88218Jiangming Zhao, Siavash Jafarzadeh, University ofNebraska–Lincoln, Lincoln, NE, United States, Ziguang Chen,Huazhong University of Science and Technology, Wuhan,Hubei, China, Florin Bobaru, University of Nebraska–Lincoln,Lincoln, NE, United States

260. Multiresolution Modeling and Error Control With anAdaptive Wavelet AlgorithmPoster Presentation. IMECE2018-88289Cale Harnish, Karel Matouš, University of Notre Dame,Notre Dame, IN, United States, Daniel Livescu, Los AlamosNational Lab, Los Alamos, NM, United States

261. Impact Induce Behavior of HTPB/HMX BasedEnergetic Materials Using Cohesive Finite Element MethodPoster Presentation. IMECE2018-88950Ayotomi Olokun, Chandra Prakash, Ibrahim Gunduz, Vikas Tomar, Purdue University, West Lafayette, IN, UnitedStates

262. Lone-Pair Electrons Lead to Strong PhononAnharmonicity and Anomalous Strain Enhancement ofThermal ConductivityPoster Presentation. IMECE2018-89005Guangzhao Qin, Ming Hu, University of South Carolina,Columbia, SC, United States

263. Multiscale Fracture Simulation Based on CoupledSpace-Time Finite Element Method and PeridynamicsPoster Presentation. IMECE2018-89258Rui Zhang, Shogo Wada, Clint Nicely, Qian Qian, Universityof Texas at Dallas, Richardson, TX, United States


242

ASME IMECE 2018 Program...Download the ASME Crowd Compass Attendee Hub App and hold the entire...

Documents

Transcript of ASME IMECE 2018 Program...Download the ASME Crowd Compass Attendee Hub App and hold the entire...