AS-P - se · 1 [SmartXController]03-18031-02-en June2016 Schneider Electric | Building Business ...

1

[SmartX Controller ]

03-18031-02-en June 2016

Schneider Electric | Building Business www.schneider-electric.com/buildings

©20

16S

chne

ider

Ele

ctric

.All

right

sre

serv

ed.

SmartStruxure solution

Trademarks and registered trademarks are the property of their respective owners.

AASS--PP

IntroductionAt the core of a SmartStruxure solution is aSmartStruxure server device, such as AS-P. AS-Pperforms key functionality, such as control logic,trend logging, and alarm supervision, and supportscommunication and connectivity to the I/O and fieldbuses. The distributed intelligence of theSmartStruxure solution ensures fault tolerance inthe system and provides a fully featured userinterface through WorkStation and WebStation.

FeaturesAS-P is a powerful device that can act as astandalone server and also control I/O modules andmonitor and manage field bus devices. In a smallinstallation, the embedded AS-P device acts as astandalone server, mounted with its I/O modules ina small footprint. In medium and large installations,functionality is distributed over multipleSmartStruxure server devices that communicateover TCP/IP.

Communications hubCapable of coordinating traffic from above andbelow its location, AS-P can deliver data directly toyou or to other servers throughout the site. AS-Pcan run multiple control programs, manage localI/O, alarms, and users, handle scheduling and

logging, and communicate using a variety ofprotocols. Because of this, most parts of thesystem function autonomously and continue to runas a whole even if communication fails or individualSmartStruxure servers or devices go offline.

Variety of connectivity optionsAS-P has numerous ports that enable it tocommunicate with a wide range of protocols,devices, and servers.

AS-P has the following ports:

• Two 10/100 Ethernet ports

• Two RS-485 ports

• One LonWorks TP/FT port

• One built-in I/O bus port

• One USB host port

• One USB device port

The USB device port allows you to upgrade andinteract with AS-P using Device Administrator. TheUSB host port can be used to provide power andcommunications for Advanced Display.

The two Ethernet ports are connected to a built-inEthernet switch. One port should be connected tothe site network. The other port can be used toconnect a single WorkStation or WebStation, aModbus TCP unit, or a BACnet/IP device, but notanother SmartStruxure server.

Authentication and permissionsA SmartStruxure solution provides a powerfulpermission system that is easy to manage, flexible,and adapts to all kinds of system sizes. Thepermission system provides a security level to thehighest standards. Authentication is done againstthe built-in user account management system oragainst Windows Active Directory Domains. Thebuilt-in account management system providespassword policies that meet the toughestrequirements. When Windows Active Directory isused, the administration costs are lower becauseusers do not have to be managed in multipledirectories.

2


03-18031-02-en June 2016


©20

16S

chne

ider

Ele

ctric

.All

right

sre

serv

ed.



WorkStation/WebStation interfaceThrough any client, the user experience is similarregardless of which SmartStruxure server the useris logged on to. The user can log directly on to AS-P to engineer, commission, supervise, and monitorAS-P as well as its attached I/O modules and fieldbus devices. See the WorkStation and WebStationdatasheets for additional information.

Open building protocol supportOne of the cornerstones of SmartStruxure solutionis support for open standards. AS-P can nativelycommunicate with three of the most popularstandards for buildings: BACnet, LonWorks, andModbus.

Native BACnet supportAS-P communicates directly to BACnet/IP andBACnet MS/TP networks. AS-P provides access toan extensive range of BACnet devices fromSchneider Electric and other vendors.

Native LonWorks supportAS-P has a built-in FTT-10 port to communicate tothe TP/FT-10 LonWorks network. IntegratedLonWorks functionality enables access toLonWorks devices from Schneider Electric andother vendors. LonWorks networks can becommissioned, bound, and configured from AS-Pusing the built-in LonWorks Network ManagementTool. No third-party tools are needed. A protocolanalyzer with powerful debugging and networkquality monitoring features can be achieved usingthird-party software, without additional hardwareneeded. To increase ease of use, LNS device plug-ins are supported. This allows for easier engineeringand maintenance of LonWorks devices fromSchneider Electric and other vendors. There aresome limitations on how LNS device plug-ins canbe used.

Native Modbus supportAS-P natively integrates Modbus RS-485 masterand slave configurations, as well as TCP client andserver. This allows full access to third-partyproducts and the range of Schneider Electricproducts that communicate on the Modbusprotocol, such as power meters, UPS, circuitbreakers, and lighting controllers.

Additional building protocol supportAS-P also supports integration and communicationwith Schneider Electric supplied BMS systems anddevices that use the following standards forbuildings: I/NET, MicroNet, and NETWORK 8000.

Web Services supportAS-P supports the use of Web Services based onopen standards, such as SOAP and REST, toconsume data into the SmartStruxure solution. Useincoming third-party data (temperature forecast,energy cost) over the Web to determine site modes,scheduling, and programming.

EcoStruxure Web Services supportEcoStruxure Web Services, Schneider Electric’sWeb Services standard, is natively supported in AS-P. EcoStruxure Web Services offers extra featuresbetween compliant systems whether withinSchneider Electric or other authorized systems.These features include system directory browsing,read/write of current values, alarm receipt andacknowledgement, and historical trend log data.EcoStruxure Web Services is secure. User nameand password are required to log on to the system.

Scalable custom configurationsAS-P and its family of I/O modules were designedto meet the unique needs of each installation.Depending on the configuration, each AS-P cancontrol up to 464 I/O points. Because power andcommunications are delivered along a commonbus, multiple modules can be plugged togetherwithout tools in a simple one-step process usingthe built-in connectors.

Two programming optionsUnique to the industry, AS-P has both Script andFunction Block programming options. This flexibilityassures that the best programming method can beselected for the application.

4 GB of eMMC memory for data and backupAS-P has an available capacity of 4 GB of eMMCmemory. This represents 2 GB for application andhistorical data and 2 GB dedicated for backupstorage. This ensures that all data is safe fromdamage, loss, or unintended edits. Users can alsomanually back up or restore AS-P to a storagelocation on a PC or network. Through theEnterprise Server, users have the ability to performscheduled backups of associated AS-P devices tonetwork storage for even greater levels ofprotection.

IT friendlyAS-P communicates using the networkingstandards. This makes installations easy,management simple, and transactions secure.

3

03-18031-02-en


June 2016


©20

16S

chne

ider

Ele

ctric

.All

right

sre

serv

ed.



TLS supportCommunication between clients and theSmartStruxure servers can be encrypted usingTransport Layer Security (TLS 1.0). The servers aredelivered with a default self-signed certificate.Commercial Certification Authority (CA) servercertificates are supported to lower the risk ofmalicious information technology attacks. Use ofencrypted communication can be enforced for bothWorkStation and WebStation access.

Supported protocols• IP addressing (IPv6 ready)

• TCP communications

• DHCP/DNS for rapid deployment and lookupof addresses

• HTTP/HTTPS for Internet access throughfirewalls, which enables remote monitoring andcontrol

• NTP (Network Time Protocol) for timesynchronization throughout the system

• SMTP with support for SSL/TLS basedauthentication, enables sending emailmessages triggered by schedule or alarm

• SNMP enables network supervision andreception of application alarms in designatednetwork management tools

Patented two-piece designEach module can be separated from its terminalbase to allow the site to be wired prior to theinstallation of the electronics. The patented lockingmechanism serves as handles for removing themodule from its base. All critical components havea protective cover that permits convection coolingto occur.

Figure: Two-piece design

Auto-addressingThe auto-addressing feature eliminates the need forsetting DIP switches or pressing commissionbuttons. Each module automatically knows its orderin the chain and assigns itself accordingly –significantly reducing engineering and maintenancetime.

Simple DIN-rail installationFasteners easily snap into a locked position forpanel installation. The fastener has a quick-releasefeature for easy DIN-rail removal.

SpecificationsElectrical

DC input supply power ....................................................................................................................... 10 W

DC input supply voltage ...................................................................................................................24 VDC

Environment

Ambient temperature, operating .............................................................................0 to 50 °C (32 to 122 °F)

Ambient temperature, storage .........................................................................-20 to +70 °C (-4 to +158 °F)

Maximum humidity...............................................................................................95 % RH non-condensing

Material

Plastic rating................................................................................................................................UL94-5VB

Enclosure .......................................................................................................................................PC/ABS

4

03-18031-02-en


June 2016


©20

16S

chne

ider

Ele

ctric

.All

right

sre

serv

ed.



Enclosure rating...................................................................................................................................IP 20

Mechanical

Dimensions including terminal base ..............................90 W x 114 H x 64 D mm (3.6 W x 4.5 H x 2.5 D in.)

Weight including terminal base......................................................................................... 0.321 kg (0.71 lb)

Weight excluding terminal base........................................................................................ 0.245 kg (0.54 lb)

Agency compliances

Emission ................................................................RCM; EN 61000-6-3; FCC Part 15, Sub-part B, Class A

Immunity ...............................................................................................................................EN 61000-6-2

Safety.................................................................................................EN 61010-1; UL 916 C-UL US Listed

Product ....................................................................................................................................EN 61326-1

Real-time clock backup

Inaccuracy, at 25 °C (77 °F)..................................................................................+/-52 seconds per month

Backup time....................................................................................................................................10 days

Communication ports

Ethernet ........................................................................................................... Dual 10/100BASE-TX RJ45

USB....................................................................... USB 2.0, 1 device port (mini-B) and 1 host port (type-A)

RS-485 .......................................................................................................Dual 2-wire ports, bias 5.0 VDC

LonWorks .....................................................................................................................................TP/FT-10

Communications

BACnet..................................................................BACnet/IP and MS/TP, port configurable, default 47808

Modbus .......................................................................................................Modbus TCP, client and server....................................................................................................................Serial, RS-485, master or slave

TCP.........................................................................................................................Binary, port fixed, 4444

HTTP.............................................................................................Non-binary, port configurable, default 80

HTTPS ............................................................Encrypted supporting TLS 1.0, port configurable default 443

SMTP........................................................................................Email sending, port configurable, default 25

SNMP............................................................................................................................................version 3...................................................................................................... Network supervision using poll and trap.......................................................................................................Application alarm distribution using trap

5

03-18031-02-en


June 2016


©20

16S

chne

ider

Ele

ctric

.All

right

sre

serv

ed.



Terminals

LNS

LNS version................................................................................................................................. OpenLNS.........................................................................................................................Installed on WorkStation PC

LonMark

Resource files version .........................................................................................................................14.00

CPU

Frequency .................................................................................................................................... 500 MHz

Type................................................................................................SPEAr1380, ARM Cortex-A9 dual-core

DDR3 SDRAM................................................................................................................................ 512 MB

eMMC memory ...................................................................................................................................4 GB

Memory backup ..................................................................................... Yes, battery-free, no maintenance

Part numbers

SmartX Controller – AS-P............................................................................................. SXWASPXXX10001TB-ASP-W1, Terminal Base for SmartX Controller – AS-P(Required for each SmartX Controller – AS-P).............................................................. SXWTBASW110002

Add-on options

SW-EWS-1, EcoStruxure Web Services (run-time) optionConsume only for one SmartStruxure server, no maintenance.....................................SXWSWEWSX00001

SW-EWS-2, EcoStruxure Web Services (run-time) optionServe & Consume for one SmartStruxure server, no maintenance ...............................SXWSWEWSX00002

6

03-18031-02-en


June 2016


©20

16S

chne

ider

Ele

ctric

.All

right

sre

serv

ed.



SW-EWS-3, EcoStruxure Web Services (run-time) optionServe & Consume, plus Historical trend log data for one SmartStruxure server, nomaintenance ...............................................................................................................SXWSWEWSX00003

SW-GWS-1, Web Services (Generic Consume) optionFor one SmartStruxure server, no maintenance ..........................................................SXWSWGWSX00001

SW-SNMP-1, Alarm notifications via SNMP optionFor one SmartStruxure server, no maintenance...........................................................SXWSWSNMP00001

SW-SMARTDRIVER-1, Communication to external devices via SmartDriverFor one SmartDriver license.........................................................................................SXWSWSDRV00001

Regulatory Notices

Federal Communications CommissionFCC Rules and Regulations CFR 47, Part 15, Class AThis device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference. (2) This device mustaccept any interference received, including interference that may cause undesiredoperation.

Industry CanadaThis Class A digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Regulatory Compliance Mark (RCM) - Australian Communications and MediaAuthority (ACMA)This equipment complies with the requirements of the relevant ACMA standards madeunder the Radiocommunications Act 1992 and the Telecommunications Act 1997. Thesestandards are referenced in notices made under section 182 of the RadiocommunicationsAct and 407 of the Telecommunications Act.

CE - Compliance to European Union (EU)2014/30/EU Electromagnetic Compatibility Directive2011/65/EU Restriction of Hazardous Substances (RoHS) DirectiveThis equipment complies with the rules, of the Official Journal of the European Union, forgoverning the Self Declaration of the CE Marking for the European Union as specified inthe above directive(s) per the provisions of the following standards: EN 61326-1 ProductStandard, EN 61010-1 Safety Standard.

WEEE - Directive of the European Union (EU)This equipment and its packaging carry the waste of electrical and electronic equipment(WEEE) label, in compliance with European Union (EU) Directive 2012/19/EU, governingthe disposal and recycling of electrical and electronic equipment in the Europeancommunity.

UL 916 Listed products for the United States and Canada, Open Class EnergyManagement Equipment. UL file E80146.

AS-P - se · 1 [SmartXController]03-18031-02-en June2016 Schneider Electric | Building Business ...

Documents

Transcript of AS-P - se · 1 [SmartXController]03-18031-02-en June2016 Schneider Electric | Building Business ...