As NZS 4769.1-2000 Radiocommunications Equipment Used in the Paging Service Angle Modulated...
-
Upload
sai-global-apac -
Category
Documents
-
view
223 -
download
2
Transcript of As NZS 4769.1-2000 Radiocommunications Equipment Used in the Paging Service Angle Modulated...
-
7/31/2019 As NZS 4769.1-2000 Radiocommunications Equipment Used in the Paging Service Angle Modulated Equipment
1/12
AS/NZS 4769.1:2000(Incorporating Amendment No. 1)
Australian/New Zealand Standard
Radiocommunications equipment usedin the paging service
Part 1: Angle modulated equipment
[Modified and containing the full text of ETS 300 224:1998]
AS/NZS
4
769.1
-
7/31/2019 As NZS 4769.1-2000 Radiocommunications Equipment Used in the Paging Service Angle Modulated Equipment
2/12
AS/NZS 4769.1:2000
This Joint Australian/New Zealand Standard was prepared by Joint TechnicalCommittee RC/1, Radiocommunications EquipmentGeneral. It was approved on
behalf of the Council of Standards Australia on 31 January 2000 and on behalf ofthe Council of Standards New Zealand on 24 January 2000. It was published on20 April 2000.
The following are represented on Committee RC/1:
AirServices Australia
Australian Communications Authority
Australian Electrical and Electronic Manufacturers Association
Cable and Wireless Optus, AustraliaCommunications, Electrical Plumbing Union, Australia
Consumers Federation of AustraliaCSIRODivision of Applied Physics, Australia
Department of Defence, Australia
Federation of Australian Commercial Television Stations
Ministry of Commerce, New ZealandRadio Site Operators and Users Association, Australia
Telstra Corporation, AustraliaWireless Institute of Australia
Keeping Standards up-to-date
Standards are living documents which reflect progress in science, technology andsystems. To maintain their currency, all Standards are periodically reviewed, andnew editions are published. Between editions, amendments may be issued.Standards may also be withdrawn. It is important that readers assure themselvesthey are using a current Standard, which should include any amendments whichmay have been published since the Standard was purchased.
Detailed information about joint Australian/New Zealand Standards can be found byvisiting the Standards Australia web site at www.standards.com.au or Standards
New Zealand web site at www.standards.co.nz and looking up the relevant Standardin the on-line catalogue.
Alternatively, both organizations publish an annual printed Catalogue with fulldetails of all current Standards. For more frequent listings or notification ofrevisions, amendments and withdrawals, Standards Australia and Standards NewZealand offer a number of update options. For information about these services,users should contact their respective national Standards organization.
We also welcome suggestions for improvement in our Standards, and especiallyencourage readers to notify us immediately of any apparent inaccuracies orambiguities. Please address your comments to the Chief Executive of eitherStandards Australia International or Standards New Zealand at the address shownon the back cover.
This Standard was issued in draft form for comment as DR 97480.
http://www.standards.com.au/http://www.standards.com.au/ -
7/31/2019 As NZS 4769.1-2000 Radiocommunications Equipment Used in the Paging Service Angle Modulated Equipment
3/12
AS/NZS 4769.1:2000(Incorporating Amendment No. 1)
Australian/New Zealand Standard
Radiocommunications equipment usedin the paging service
Part 1: Angle modulated equipment
First published as AS /NZS 4769.1:2000.
Reissued incorporating Amendment No. 1 (August 2002).
COPYRIGHT
S tandards Aust ral ia /Standards New ZealandAll rights are reserved. No part of this work may be reproduced or copi ed in any formor by any means, electronic or mechanical, including photocopying, without the writtenpermission of the publisher.
Jointly published by Standards Austr alia International Ltd, PO Box 1055, Strathfield,NSW 2135 and Standards New Zealand, Private Bag 2439, W ellington 6020
ISBN 0 7337 3287 9
-
7/31/2019 As NZS 4769.1-2000 Radiocommunications Equipment Used in the Paging Service Angle Modulated Equipment
4/12
ii
PREFACE
This Standard was prepared by the Joint Standards Australia/Standards New Zealand
Committee RC/1, Radiocommunications EquipmentGeneral, as one of a series of Standards
intended to provide specification for spectrum management and minimum radio equipment
performance.
This Standard incorporates Amendment No.1 (August 2002). The changes required by the
Amendment are indicated in the text by a marginal bar and amendment number against the
clause, note, table, figure or part thereof affected.
It is produced in two parts, with Part 1 pertaining to angle modulated equipment reproduced
from European Telecommunication Standard ETS 300 224:1998, Electromagnetic compatibility
and Radio spectrum matters (ERM), On-site paging serviceTechnical and functional
characteristics for on-site paging systems, including test methods, drawn up by the EMC and
Radio Spectrum Matters (ERM) Technical Committee of the European Telecommunications
Standards Institute. Part 2 pertains to amplitude modulated systems and is of local origin to
align with other Australian/New Zealand AM Standards.
This Standard is Part 1 of AS/NZS 4769, Radiocommunications equipment used in the paging
service, which is published in parts as follows:
AS/NZS
4769 Radiocommunications equipment used in the paging service
Part 1: Angle modulated equipment (this Standard)
Part 2: Amplitude modulated equipment
This Standard differs from ETS 300 224:1994 in that some requirements are varied to reflect
local conditions and usage. A table is included providing Australian and New Zealand
requirements in addition to variations reflecting local environmental conditions.
Where the text of ETS 300 224 has been varied technically to accommodate different or
additional requirements for Australia and New Zealand, it is indicated by double vertical linesin the left hand margin against the clause affected. Australian and New Zealand variations to
ETS 300 224 are given in Appendix ZZ at the end of this publication.
The term normative has been used in this Standard to define the application of the appendix to
which it applies. A normative appendix is an integral part of a Standard.
As this Standard is reproduced from an International Standard, the following applies:
(a) Its number appears on the cover and title page while the European Standard number
appears only on the cover.
(b) In the source text this European Telecommunications Standard should read this
Australian/New Zealand Standard.
(c) A full point substitutes for a comma when referring to a decimal marker.
There are no Australian/New Zealand Standards equivalent to those international Standards
listed as normative references, thus the originally referenced Standards apply.
-
7/31/2019 As NZS 4769.1-2000 Radiocommunications Equipment Used in the Paging Service Angle Modulated Equipment
5/12
-
7/31/2019 As NZS 4769.1-2000 Radiocommunications Equipment Used in the Paging Service Angle Modulated Equipment
6/12
-
7/31/2019 As NZS 4769.1-2000 Radiocommunications Equipment Used in the Paging Service Angle Modulated Equipment
7/12
-
7/31/2019 As NZS 4769.1-2000 Radiocommunications Equipment Used in the Paging Service Angle Modulated Equipment
8/12
-
7/31/2019 As NZS 4769.1-2000 Radiocommunications Equipment Used in the Paging Service Angle Modulated Equipment
9/12
-
7/31/2019 As NZS 4769.1-2000 Radiocommunications Equipment Used in the Paging Service Angle Modulated Equipment
10/12
-
7/31/2019 As NZS 4769.1-2000 Radiocommunications Equipment Used in the Paging Service Angle Modulated Equipment
11/12
-
7/31/2019 As NZS 4769.1-2000 Radiocommunications Equipment Used in the Paging Service Angle Modulated Equipment
12/12
This is a free preview. Purchase the entire publication at the link below:
Looking for additional Standards? Visit SAI Global Infostore
Subscribe to ourFree Newsletters about Australian Standards in Legislation; ISO, IEC, BSI and more
Do you need to Manage Standards Collections Online?
Learn about LexConnect, All Jurisdictions, Standards referenced in Australian legislation
Do you want to know when a Standard has changed?
Want to become an SAI Global Standards Sales Affiliate?
Learn about other SAI Global Services:
LOGICOM Military Parts and Supplier DatabaseMetals Infobase Database of Metal Grades, Standards and Manufacturers
Materials Infobase Database of Materials, Standards and Suppliers
Database of European Law, CELEX and Court Decisions
Need to speak with a Customer Service Representative - Contact Us
AS/NZS 4769.1:2000, Radiocommunicationsequipment used in the paging service Anglemodulated equipment
http://infostore.saiglobal.com/store?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Newsletters/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Collections/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/StandardsWatch/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Affiliate/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/LOGICOM/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/LOGICOM/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Metals/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Materials/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/European-Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store/getpage.aspx?path=/InformationServices/shop/pages/ContactingUs.htm&utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store/Details.aspx?ProductId=386134&utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store/getpage.aspx?path=/InformationServices/shop/pages/ContactingUs.htm&utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/European-Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Materials/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Metals/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/LOGICOM/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Affiliate/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/StandardsWatch/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Collections/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Newsletters/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSites