ARCHITECTURAL FLOOR TACTILES, STAIR TREADS & EDGING SOLUTIONS

2021 PRODUCTS & SERVICES GUIDE

ARCHITECTURAL FLOOR TACTILES,STAIR TREADS & EDGING SOLUTIONS

DTAC PTY LTD

ABN 41 093 070 127ACN 093 070 127

DTAC PROJECT MANAGEMENT

PTY LTD

ABN 88 099 729 003ACN 009 972 9003

CONTACT DETAILS

T: 1300 793 478F: 1300 780 628

E: [email protected]

POSTAL ADDRESS

PO BOX 5059South MelbourneVIC Australia 3205

OFFICE ADDRESS

4/11-12 Phillip CourtPort Melbourne VIC

Australia 3207

www.dtac.com.au ABOUT DTAC | 1PEMKO®

ABOUT DTAC 2

SERVICES 4

WARNING TGSI’S 6Stainless Classic 8

Stainless Terraced 12

Black Top Classic 14

Black Top Terraced 15

Yellow Top Classic 16

Silicon Carbide Classic 17

Brass Classic 18

Brass Terraced 20

Colourmax® Classic 21

Urethane Classic 22

DIRECTIONAL TGSI’S 24Stainless Steel 26

Silicon Carbide Classic 26

Urethane Classic 28

INTEGRATED TGSI’S 30Stainless Classic 32

Black Top Classic 34

Ultimat® Tactile 36

DESIGNER STAIR EDGING 38Corduroy 40

Pinstripe 41

Pleat 42

Stitch 43

Suede 44

Urban 46

Urban Mill 48

Rugged™ 51

STAIR EDGING SYSTEMS FOR CARPET 52

URBAN EDGE PROTECTORS 56Button Round 58

Button Bevelled 59

Bar Thin 60

Bar Thick 61

HANDRAIL TACTILE INDICATORS 62Stainless Steel 64

INDEX 66

CONTENTS

2 | ABOUT DTAC © DTAC Pty Ltd 2021PEMKO®

ABOUT DTACAn Australian company with over 15 years in design and product innovation excellence, DTAC is a specialised team of professionals that focus on producing superior quality products to meet the challenges of Australia’s Tactile, Stair Tread and Edging compliance.

DTAC provides a complete service nationwide, facilitated through our trained experts and DTAC’s certified tactile and edging installers. We design, manufacture and install a leading range of tactile ground surface indicators (TGSI’s), stair treads and edging solutions along with anti-skate products for edge protection and handrail tactile indicators (HRTI’s).

We also provide a range of services to complement our product offering including design and layout consultation, access consultancy and risk management assessments or programs.

Our industry leading attention to detail ensures that architects, builders, designers and specifiers make the right selection, for aesthetics and product quality while maintaining regulatory compliance.

Disclaimer: All technical data and recommendations although based upon our research and believed to be reliable are given in good faith but without warranty. It is understood that users will independently determine the suitability of the DTAC’s website content shown herein for their purposes.


THE DTAC DIFFERENCE

When using DTAC products and services, you can be assured that:

• Products and solutions are designed to meet or even exceed certification and Australian and New Zealand Standards requirements

• Consultative support including layout and compliance services are provided throughout the life of the project including NCC interpretation

• DTAC manage the entire project from design and manufacturing to installation using our team of accredited professionals

• DTAC strive for excellence in design and craftsmanship but also back our products by warranty

• DTAC is part of the Raven Group of companies ensuring the highest quality products and services

HOW CAN DTAC HELP?

DTAC are a vertically integrated business that designs, installs and maintains their products to the exacting codes and standards of the applicable regulatory body. We have a team of trained personnel all of whom are experienced in the requirements of the relevant standards and codes.

WE CAN HELP:• Interpret and apply the relevant

standards and codes applicable to your project

• Design a solution to your project requirements

• Manufacture and install products on site

CONTACT US

If you have any questions in relation to the DTAC range, DTAC is ready and able to assist you in getting it right.

Email a DTAC representative at [email protected] or for a friendly voice you can call 1300 793 478.

4 | ABOUT DTAC © DTAC Pty Ltd 2021PEMKO®

SERVICESDTAC provides complete services nationwide, facilitated through our trained experts and DTAC’s certified tactile and edging installers.

Our industry leading attention to detail ensures that architects, builders, designers and specifiers make the right selection, for aesthetics and product quality while maintaining regulatory compliance.

SUPPLY & INSTALLATION

DTAC design and craft their own products and services in Australia. With a comprehensive range of tactiles and stair treads available you can be certain that DTAC have the right product and the right advice for your application.

Our range is designed to conform to the NCC and Disability Discrimination Act (DDA) requirements with extensive testing and certification available.

DTAC can supply product only as well as supply and install our own products, keeping records for each DTAC Project Management installation. DTAC installers are trained under the DTAC 18 Step Accreditation process known as ‘The Art of Tactile Certification™’


PRODUCT SELECTION & COMPLIANCE CONSULTATION

DTAC have a team of trained professionals who are experienced in the field of TGSI's and stair treads explicitly in the normative aspects of AS/NZS 1428.4.1. When you choose DTAC products, our experts are available to assist with product selection, specification as well as designing compliant layouts and installations.

By specifying DTAC products and utilising our layout and installation expertise, you can avoid costly project delays and ensure the highest level of compliance.

DTAC ACCESS CONSULTING

DTAC Access Consultants aim to provide architects and builders with practical and objective advice on the provision of access to premises (buildings) for people with disabilities. Specifically in the interpretation of AS/NZS 1428.4.1 and how this is applied to tactiles and stair tread installations.

RISK MANAGEMENT & MAINTENANCE

With the ever changing legislative environment and the legal requirement to maintain tactile and stair tread installations, DTAC can provide once off risk assessment services as well as ongoing maintenance programs.

6 | WARNING TGSI’s © DTAC Pty Ltd 2021

PEMKO®

WARNING TGSI’sWarning TGSI’s are a series of raised dots that are installed on pedestrian surfaces. They assist in the orientation of the vision impaired and give tactile warning so they may safely navigate the built environment.

Felt under foot, detected by cane, or even read as a light contrast between a surface and a hazard, TGSI's give information to the vision impaired on where they are, where they are going and where they have been.

With an extensive range of designs and colours, DTAC work closely with architects, specifiers and builders to exceed design and aesthetic expectations on every project.

• Available in a range of colours and designs to suit all applications

• Solutions for all stable surfaces and substrates

• Designed to comply with building codes and regulations

• Tested for compliance with luminance and slip resistance requirements

• Backed by 2 year warranty

DTAC's Warning TGSI's are identifiable by the unique registered "double lip" design, providing a distinct advantage when it comes to high slip resistance.

DTAC DT0100 INSTALLATION

Ø25 Ø25

5 5

18

Ø35 Ø35


STAINLESS CLASSIC

PEMKO®

SUITABLE FOR SUBSTRATESVitrified porcelain, ceramics, glass, metals

FIXINGDirect stick

LOCATIONIndoor or outdoor

APPROVALSSLIP RESISTANCE TESTING

AS 4586 Appendix A AS 4586 Appendix C AS 4586 Appendix D

LUMINANCE TESTING AS/NZS 1428.4.1 Appendix E3

STAINLESS STEEL CLASSIC WARNING TACTILE (SPIKED)

STAINLESS STEEL CLASSIC WARNING TACTILE (FLAT)

DTAC Classic Warning Tactiles combine a high quality finish with high slip resistance properties. Manufactured in 316 marine grade stainless steel, featuring a concentric circle design on the horizontal face with a smooth outer edge.

Registered Design

STAINLESS CLASSIC

PRODUCT CODE: DT0101PRODUCT CODE: DT0100

R12GRIP

R12GRIP

SUITABLE FOR SUBSTRATESStone, masonry, timber, vinyl, vitrified porcelain, ceramics, glass, metals

FIXINGDrill and pressure fit or diamond core and pressure fit





NCCCOMPLIANT

NCCCOMPLIANT

Ø25 Ø25

5 5

36

Ø35 Ø35

www.dtac.com.au WARNING TGSI’s | 9

STAINLESS CLASSIC

PEMKO®

SUITABLE FOR SUBSTRATESCarpet, carpet tiles

Note: Carpet plates supplied with carpet tactiles.

FIXINGDrill and screw






Note: Carpet plates supplied with carpet tactiles.










STAINLESS STEEL CLASSIC TACTILE CARPET SYSTEM (LOW PILE)

STAINLESS STEEL CLASSIC TACTILE CARPET SYSTEM (HIGH PILE)

CARPET PLATE (100X300MM)

CARPET PLATE (300X300MM)

PRODUCT CODE: DT0103 PRODUCT CODE: DT0106 PRODUCT CODE: DCS0010

PRODUCT CODE: DCS0020

R12GRIP

R12GRIP

NCCCOMPLIANT

NCCCOMPLIANT

Ø25

Ø25 5

5

25

18

Ø35

Ø35


STAINLESS CLASSIC

PEMKO®

SUITABLE FOR SUBSTRATESCarpet, carpet tiles, rubber

FIXINGDrill and pressure fit











STAINLESS STEEL CLASSIC ECOTAC® (HIGH PILE)

STAINLESS STEEL CLASSIC ECOTAC® (SPIKED)

PRODUCT CODE: DT0125PRODUCT CODE: DT0120

R12GRIP

R12GRIP

NCCCOMPLIANT

NCCCOMPLIANT

Ø25

5

18

Ø35

Ø25

5

Ø35


STAINLESS CLASSIC

PEMKO®





AS 4586 Appendix ALUMINANCE TESTING

AS/NZS 1428.4.1 Appendix E3

STAINLESS STEEL CLASSIC ECOTAC® PVD BLACK (SPIKED)

PRODUCT CODE: DT0122

P5GRIP

P5GRIP

NCCCOMPLIANT


FIXINGDirect stick





STAINLESS STEEL CLASSIC PVD BLACK (FLAT)


NCCCOMPLIANT

Ø25 Ø25

5 5

18

Ø35 Ø35


STAINLESS TERRACED

PEMKO®


FIXINGDirect stick





STAINLESS STEEL TERRACED WARNING TACTILE (SPIKED)

STAINLESS STEEL TERRACED WARNING TACTILE (FLAT)

DTAC Terraced Warning Tactiles combine a high quality finish with high slip resistance properties. Manufactured in 316 marine grade stainless steel, featuring a concentric circle design on the horizontal face and a terraced outer edge.

Registered Design.

STAINLESS TERRACED

PRODUCT CODE: DT0110 PRODUCT CODE: DT0111

R12GRIP

R12GRIP







NCCCOMPLIANT

NCCCOMPLIANT

Ø25 Ø25

5 5

3 6

Ø35 Ø35

Ø25

5

18

Ø35


STAINLESS TERRACED

PEMKO®


Note: Carpet plates supplied with carpet tactiles. Refer page 9.













STAINLESS STEEL TERRACED TACTILE CARPET SYSTEM (LOW PILE)

STAINLESS STEEL TERRACED TACTILE CARPET SYSTEM (HIGH PILE)


R12GRIP

R12GRIP







STAINLESS STEEL TERRACED ECOTAC® (SPIKED)


R12GRIP

NCCCOMPLIANT

NCCCOMPLIANT

NCCCOMPLIANT

Ø25 Ø25

5 5

18

Ø35 Ø35


BLACK TOP CLASSIC

PEMKO®


FIXINGDirect stick





BLACK TOP CLASSIC WARNING TACTILE (SPIKED)

BLACK TOP CLASSIC WARNING TACTILE (FLAT)

DTAC Classic Black Top Tactiles combine a high quality finish with high slip resistance properties. Manufactured in 316 marine grade stainless steel incorporating a moulded polymer insert, it features a concentric circle design on the horizontal face and a smooth outer edge.

Registered Design.

BLACK TOP CLASSIC


R12GRIP

R12GRIP







NCCCOMPLIANT

NCCCOMPLIANT

Ø25 Ø25

5 5

18

Ø35 Ø35


BLACK TOP TERRACED

PEMKO®


FIXINGDirect stick





BLACK TOP TERRACED WARNING TACTILE (SPIKED)

BLACK TOP TERRACED WARNING TACTILE (FLAT)

DTAC Terraced Black Top Tactiles combine a high quality finish with high slip resistance properties. Manufactured in 316 marine grade stainless steel incorporating a moulded polymer insert, it features a concentric circle design on the horizontal face and a terraced outer edge.

Registered Design.

BLACK TOP TERRACED


R11GRIP

R11GRIP







NCCCOMPLIANT

NCCCOMPLIANT

Ø25

5

18

Ø35


YELLOW TOP CLASSIC

PEMKO®

YELLOW TOP CLASSIC WARNING TACTILE (SPIKED)

DTAC Classic Yellow Top Tactiles combine a high quality finish with high slip resistance properties. Manufactured in 316 marine grade stainless steel incorporating a moulded polymer insert, it features a concentric circle design on the horizontal face and a smooth outer edge.

Registered Design.

YELLOW TOP CLASSIC

PRODUCT CODE: DT0200Y

P5GRIP







NCCCOMPLIANT

Ø25

5

18

Ø35

Ø25

5

Ø35


SILICON CARBIDE CLASSIC

PEMKO®

SILICON CARBIDE CLASSIC WARNING TACTILE (SPIKED)

DTAC Classic Silicon Carbide Warning Tactiles combine a high quality finish with high slip resistance properties. Manufactured in 316 marine grade stainless steel with hard wearing silicon carbide inserted into the horizontal face with a smooth machined outer edge.

Registered Design.

SILICON CARBIDE CLASSIC PRODUCT CODE: DT0212

P5GRIP







NCCCOMPLIANT


FIXINGDirect stick





SILICON CARBIDE CLASSIC WARNING TACTILE (FLAT)


P5GRIP

NCCCOMPLIANT

Ø25

5

18

Ø35

Ø25

5

Ø35


BRASS CLASSIC

PEMKO®

BRASS CLASSIC WARNING TACTILE (SPIKED)

DTAC Classic Brass Warning Tactiles combine a high quality finish with high slip resistance properties. Manufactured from solid brass it features a concentric circle design on the horizontal face with a smooth outer edge.

Registered Design.

BRASS CLASSIC


R12GRIP








FIXINGDirect stick





BRASS CLASSIC WARNING TACTILE (FLAT)


R12GRIP

NCCCOMPLIANT

NCCCOMPLIANT

Ø25

5

6

Ø35

Ø25

5

18

Ø35


BRASS CLASSIC

PEMKO®








BRASS CLASSIC TACTILE CARPET SYSTEM (HIGH PILE)


R12GRIP

DTAC DT0300 INSTALLATION

NCCCOMPLIANT







BRASS CLASSIC ECOTAC® (SPIKED)


R12GRIP

NCCCOMPLIANT

Ø25

5

18

Ø35

Ø25

5

Ø35


BRASS TERRACED

PEMKO®

BRASS TERRACED WARNING TACTILE (SPIKED)

DTAC Terraced Brass Warning Tactiles combine a high quality finish with high slip resistance properties. Manufactured from solid brass, featuring a concentric circle design on the horizontal face and a terraced outer edge.

Registered Design.

BRASS TERRACED


P5GRIP








FIXINGDirect stick





BRASS TERRACED WARNING TACTILE (FLAT)


P5GRIP

NCCCOMPLIANT

NCCCOMPLIANT

Ø25 Ø25

5 5

18 18

Ø35 Ø35

www.dtac.com.au WARNING TGSI’s | 21PEMKO®

COLOURMAX® CLASSIC

COLOURMAX® CLASSIC WARNING TACTILE (BLACK)

COLOURMAX® CLASSIC WARNING TACTILE (YELLOW)

DTAC Classic Colourmax® tactiles combine the flexibility of colour with durable polymers while ensuring high slip resistance properties. Manufactured in solid 316 marine grade stainless steel with a hardwearing outer polymer ring, it has a concentric circle design on the horizontal face and a smooth outer edge.

Registered Design.

COLOURMAX® CLASSIC

PRODUCT CODE: DT0400B PRODUCT CODE: DT0400Y

P5GRIP

P5GRIP













NCCCOMPLIANT

NCCCOMPLIANT

Ø25 Ø25

5 5

18 18

Ø35 Ø35


UREThANE CLASSIC

PEMKO®

URETHANE CLASSIC WARNING TACTILE (BLACK)

URETHANE CLASSIC WARNING TACTILE (LIGHT GREY)

DTAC Classic Urethane Warning tactiles combine a high quality finish and the flexibility of colour choice with durable high grade urethanes ensuring high slip resistance properties. Moulded in high impact UV stabilised urethane, featuring a concentric circle design on the horizontal face and a smooth outer edge.

Registered Design.

URETHANE CLASSIC

PRODUCT CODE: DT0600B PRODUCT CODE: DT0600LG

R11GRIP

R11GRIP







FIRE TESTING AS/ISO 9239.1








NCCCOMPLIANT

NCCCOMPLIANT

Ø25 Ø25 Ø25

5 5 5

18 18 18

Ø35 Ø35 Ø35


UREThANE CLASSIC

PEMKO®

URETHANE CLASSIC WARNING TACTILE (YELLOW)

URETHANE CLASSIC WARNING TACTILE (WHITE)

URETHANE CLASSIC WARNING TACTILE (BLUE)

PRODUCT CODE: DT0600Y PRODUCT CODE: DT0600W PRODUCT CODE: DT0600BL

R11GRIP

R11GRIP

P5GRIP




















NCCCOMPLIANT

NCCCOMPLIANT

NCCCOMPLIANT

24 | DIRECTIONAL TGSI’s © DTAC Pty Ltd 2021PEMKO®

DIRECTIONAL TGSI’sDirectional TGSI’s are a series of raised bars that are installed on pedestrian surfaces. They assist in the orientation of the vision impaired and give tactile warning so they may safely navigate the built environment.








DTAC DIR0120 INSTALLATION

STAINLESS STEEL


DTAC Directional tactiles combine a high quality finish with high slip resistance properties. Manufactured in 316 marine grade stainless steel with a grooved design on the horizontal face.

As part of DTAC's commitment to the environment, our Ecotac® range of tactiles use significantly less material whilst maintaining the highest performance.

The silicon carbide directional tactiles feature hard wearing silicon carbide inserted into the horizontal face for maximum slip resistance.

STAINLESS STEEL


280

5

18

290

STAINLESS STEEL

www.dtac.com.au DIRECTIONAL TGSI’s | 27PEMKO®

CLASSIC ECOTAC® DIRECTIONAL TACTILE (STAINLESS STEEL)

TERRACED ECOTAC® DIRECTIONAL TACTILE (STAINLESS STEEL)

SILICON CARBIDE CLASSIC DIRECTIONAL TACTILE (STAINLESS STEEL)

PRODUCT CODE: DIR0120 PRODUCT CODE: DIR0130 PRODUCT CODE: DIR0140

R13GRIP

R13GRIP

R13GRIP





AS 4586 Appendix A AS 4586 Appendix B AS 4586 Appendix C AS 4586 Appendix D














NCCCOMPLIANT

NCCCOMPLIANT

NCCCOMPLIANT

25

5

16

35

UREThANE CLASSIC


URETHANE CLASSIC DIRECTIONAL TACTILE (BLACK)

DTAC Classic Urethane Directional tactiles combine a high quality finish and the flexibility of colour choice with durable high grade urethanes ensuring high slip resistance properties. Moulded in high impact UV stabilised urethane, featuring an undulating groove design on the horizontal face with a smooth outer edge.

Registered Design.

Patent Pending.

URETHANE CLASSIC

PRODUCT CODE: DIRP0705B

R10GRIP








NCCCOMPLIANT

275

5

16

285

UREThANE CLASSIC

www.dtac.com.au DIRECTIONAL TGSI’s | 29PEMKO®

URETHANE CLASSIC DIRECTIONAL TACTILE (LIGHT GREY)

URETHANE CLASSIC DIRECTIONAL TACTILE (YELLOW)

URETHANE CLASSIC DIRECTIONAL TACTILE (YELLOW)

PRODUCT CODE: DIRP0705LG PRODUCT CODE: DIRP0705Y PRODUCT CODE: DIRP0705W

R10GRIP

R10GRIP

R10GRIP



















NCCCOMPLIANT

NCCCOMPLIANT

NCCCOMPLIANT

30 | INTEGRATED TGSI’s © DTAC Pty Ltd 2021PEMKO®

INTEGRATED TGSI’sIntegrated TGSI’s are a series of raised dots affixed to a backing plate that is installed on pedestrian surfaces as a complete unit. They assist in the orientation of the vision impaired and give tactile warning so they may safely navigate the built environment.








DTAC DIT0040 INSTALLATION

300

2

STAINLESS CLASSIC


STAINLESS STEEL CLASSIC INTEGRATED TACTILE (300X300)


DTAC Classic Integrated tactiles combine a high quality finish with high slip resistance properties. Manufactured in 316 marine grade stainless steel with a concentric circle design on the horizontal face and smooth outer edge, tactiles are affixed to a solid plate as a single complete unit.

STAINLESS CLASSIC

PRODUCT CODE: DIT0010 PRODUCT CODE: DIT0020

P5GRIP

P5GRIP

SUITABLE FOR SUBSTRATESStone, masonry, timber, vinyl, vitrified porcelain, ceramics, glass, metals, carpet, carpet tiles

FIXINGDrill and screw or direct stick











NCCCOMPLIANT

NCCCOMPLIANT

300

2

STAINLESS CLASSIC

www.dtac.com.au INTEGRATED TGSI’s | 33PEMKO®




P5GRIP

P5GRIP













NCCCOMPLIANT

NCCCOMPLIANT


300

2

BLACK TOP CLASSIC


BLACK TOP CLASSIC INTEGRATED TACTILE (300X300)


DTAC Classic Black Top Integrated tactiles combine a high quality finish with high slip resistance properties. Manufactured in 316 marine grade stainless steel with hard wearing silicon carbide inserted into the horizontal face with a smooth machined outer edge, the tactiles are affixed to a solid plate as a single complete unit.

BLACK TOP CLASSIC


P5GRIP

P5GRIP













NCCCOMPLIANT

NCCCOMPLIANT

300

2

BLACK TOP CLASSIC





P5GRIP

P5GRIP













NCCCOMPLIANT

NCCCOMPLIANT


300

2

ULTIMAT® TACTILE


ULTIMAT® TACTILE (BLACK)

ULTIMAT® TACTILE (YELLOW)

DTAC Ultimat® Tactiles combine a high quality finish and the flexibility of colour choice with durable high grade urethanes ensuring high slip resistance properties. Moulded in high impact UV stabilised urethane, featuring a concentric circle design on the horizontal face with a smooth outer edge.

Used in conjunction with adhesive to provide excellent adhesion eliminating the need for a butyl backing.

ULTIMAT® TACTILE

PRODUCT CODE: DWU0010 PRODUCT CODE: DWU0011

R11GRIP

R11GRIP


FIXINGDirect stick







FIXINGDirect stick






NCCCOMPLIANT

NCCCOMPLIANT

300

2

ULTIMAT® TACTILE


ULTIMAT® TACTILE (LIGHT GREY)

ULTIMAT® TACTILE (IVORY)

ULTIMAT® TACTILE (WHITE)

PRODUCT CODE: DWU0012 PRODUCT CODE: DWU0013 PRODUCT CODE: DWU0014

R11GRIP

R11GRIP

R11GRIP


FIXINGDirect stick







FIXINGDirect stick







FIXINGDirect stick





NCCCOMPLIANT

NCCCOMPLIANT

NCCCOMPLIANT

38 | DESIGNER STAIR EDGING © DTAC Pty Ltd 2021PEMKO®

DESIGNER STAIR EDGINGDTAC’s range of PEMKO® stair treads and edging has transformed the manner in which you can detail a stair edge, nosing or connection. DTAC's retrofit edging series delivers a practical and aesthetically pleasing approach to slip prevention and edge protection.

Discreet in appearance, uncompromised in their design functionality and pure material aesthetic, DTAC edging can be adapted for all architectural and joinery situations including carpet and stable finished surfaces and substrates.

With many designs and finishes available, our range of edging and stair treads provide an NCC compliant solution with a flawless finish.

• Premium quality flat or angle aluminium profiles satin hard anodised finish

• Suitable for all stable finished surfaces and substrates

• Designed to comply with AS 1428.1



DTAC DE0700C INSTALLATION

50 50

3 310

CORDuROy


BRIGHT GOLD ANODISED

NATURAL ANODISEDBLACK ANODISED

PEMKO® CORDUROY EDGING 50X3

PEMKO® CORDUROY EDGING 10X50X3

DTAC PEMKO® Corduroy edging and stair treads combine a high quality finish with high slip resistant properties. Manufactured from hard anodised T5 extruded aluminium it features a continuous engraving design extending for the entire length of the section.

CORDUROY

DE0100G DE0110GBRIGHT GOLD ANODISED

DE0100C DE0110CNATURAL ANODISEDDE0100B DE0110B

PRODUCT CODES: PRODUCT CODES:

BLACK ANODISED

P5GRIP

P5GRIP


FIXINGAdhesive


LENGTH2500mm (DE0100G) 3200mm (DE0100C & DE0100B)



LUMINANCE TESTING AS 1428.1 Appendix B3


FIXINGAdhesive






NCCCOMPLIANT

NCCCOMPLIANT

50 50

3 310

PINSTRIPE

www.dtac.com.au DESIGNER STAIR EDGING | 41PEMKO®

PEMKO® PINSTRIPE EDGING 50X3

PEMKO® PINSTRIPE EDGING 10X50X3

DTAC PEMKO® Pinstripe edging and stair treads combine a high quality finish with high slip resistant properties. Manufactured from hard anodised T5 extruded aluminium it features a continuous intermittent high and low smooth surface along the length of the section.

PINSTRIPE

P4GRIP

P4GRIP


FIXINGAdhesive

LOCATIONIndoor

LENGTH2500mm (DE0200C) 3200mm (DE0200B)





FIXINGAdhesive

LOCATIONIndoor

LENGTH3200mm




DE0200C DE0210CNATURAL ANODISED NATURAL ANODISEDDE0200B DE0210B


BLACK ANODISED BLACK ANODISED

NCCCOMPLIANT

NCCCOMPLIANT

NCCCOMPLIANT

NCCCOMPLIANT

50 50

3 310

PLEAT


PEMKO® PLEAT EDGING 50X3

PEMKO® PLEAT EDGING 10X50X3

DTAC PEMKO® Pleat edging and stair treads combine a high quality finish with high slip resistant properties. Manufactured from hard anodised T5 extruded aluminium it features a continuous intermittent high engraved surface and low smooth surface along the length of the section.

PLEAT

P5GRIP

P5GRIP


FIXINGAdhesive


LENGTH2500mm





FIXINGAdhesive


LENGTH2500mm







NCCCOMPLIANT

NCCCOMPLIANT

50 50

3 310

STITCh


PEMKO® STITCH EDGING 50X3

PEMKO® STITCH EDGING 10X50X3

DTAC PEMKO® Stitch edging and stair treads combine a high quality finish with high slip resistant properties. Manufactured from T5 extruded aluminium, the Stitch design features a continuous intermittent thin high engraved surface and low wide smooth surface along the length of the section.

STITCH

P5GRIP

P5GRIP


FIXINGAdhesive

LOCATIONIndoor

LENGTH2500mm





FIXINGAdhesive

LOCATIONIndoor

LENGTH2500mm







NCCCOMPLIANT

NCCCOMPLIANT

55 55

3 310

SuEDE


PEMKO® SUEDE EDGING 50X3

PEMKO® SUEDE EDGING 10X50X3

DTAC PEMKO® Suede edging and stair treads combine a high quality finish with high slip resistant properties. Manufactured from T5 extruded aluminium it features a continuous band of slip resistant insert.

SUEDE

P5GRIP

P5GRIP


FIXINGAdhesive

LOCATIONIndoor

LENGTH3200mm





FIXINGAdhesive

LOCATIONIndoor

LENGTH2500mm (DE0510C) 3200mm (DE0510B)




DE0500C DE0510CNATURAL ANODISEDSlip resistant insert

NATURAL ANODISEDSlip resistant insert

DE0500B DE0510B


BLACK ANODISEDSlip resistant insert

BLACK ANODISEDSlip resistant insert

NCCCOMPLIANT

NCCCOMPLIANT

SuEDE



58

58

5

5

10

uRBAN


DTAC PEMKO® urban edging and stair treads combine a high quality finish with high slip resistant properties. Manufactured from T5 extruded aluminium, the urban design features a continuous bar of silicon carbide infill.

URBAN PEMKO® URBAN EDGING 10X58X5

PEMKO® URBAN EDGING 58X5

P5GRIP

P5GRIP

SUITABLE FOR SUBSTRATESStone, masonry, timber, vinyl, vitrified porcelain, ceramics, glass, metalsFIXINGAdhesive. Optional screw-fix (colour matched screws and plugs supplied)LOCATIONIndoor or outdoorLENGTH2500mm (DE0680C) 3200mm (DE0680B)APPROVALSSLIP RESISTANCE TESTING




SUITABLE FOR SUBSTRATESStone, masonry, timber, vinyl, vitrified porcelain, ceramics, glass, metalsFIXINGAdhesive. Optional screw-fix (colour matched screws and plugs supplied)LOCATIONIndoor or outdoorLENGTH2500mmAPPROVALSSLIP RESISTANCE TESTING




DE0680C DE0690CNATURAL ANODISEDGrey silicon carbide infill

NATURAL ANODISEDGrey silicon carbide infill

DE0680B DE0690B


BLACK ANODISEDBlack silicon carbide infill


NCCCOMPLIANT

NCCCOMPLIANT

65 65

5 510 10

uRBAN


PEMKO® URBAN EDGING 10X65X5


P5GRIP

P5GRIP






FIXINGAdhesive. Optional screw-fix (screws and plugs supplied)


LENGTH3200mm



AS 1428.1 Appendix B3

DE0700C DE0700CYNATURAL ANODISEDGrey silicon carbide infill

NATURAL ANODISEDyellow silicon carbide infillDE0700B



NCCCOMPLIANT

NCCCOMPLIANT

DTAC DE0700B INSTALLATION

80 95

5 5

35 35

uRBAN


DTAC PEMKO® urban edging and stair treads combine a high quality finish with high slip resistant properties. Manufactured from T5 extruded aluminium, the urban design features alternate stripes of silicon carbide infill.

URBAN PEMKO® URBAN EDGING 35X80X5


P5GRIP

P5GRIP









DE0720MF DE0730MFMILL FINISHEDBlack silicon carbide infill

MILL FINISHEDBlack silicon carbide infill


75135

5510

35

uRBAN




P5GRIP

P5GRIP









DE0750MFDE0740MF MILL FINISHEDBlack silicon carbide infill

MILL FINISHEDBlack silicon carbide infill

PRODUCT CODES:PRODUCT CODES:

50 50

5 5

uRBAN




P5GRIP

P5GRIP






FIXINGAdhesive. Optional screw-fix (screws and plugs supplied)


LENGTH3000mm




DE0760MF DE0760MFYMILL FINISHEDBlack silicon carbide infill

MILL FINISHEDyellow silicon carbide infill



70 70

3 310 10

RuGGED™


DTAC PEMKO® Rugged™ Designer Stair Edging range has high slip resistance and excellent durability. Suitable for fixing to open grate metal stairs, making it suitable for most industrial applications and can be glue or screw fixed on concrete, timber and other substrates. Manufactured from fibre glass reinforced polymer, the design is available in yellow and black, featuring 1500mm and 1800mm lengths.

RUGGED™ PEMKO® RUGGED EDGING 10X70X3 (YELLOW)

PEMKO® RUGGED EDGING 10X70X3 (BLACK)

P5GRIP

P5GRIP


FIXINGScrew-fixed onto metal stairs and gratings (fixings not supplied). Adhesive fix for all other substrates.


LENGTH1500mm 1800mm





FIXINGScrew-fixed onto metal stairs and gratings (fixings not supplied). Adhesive fix for all other substrates.


LENGTH3200mm




DEF0010Y DEF0010BDEF0020Y

1500MM 3200MM1800MM


NCCCOMPLIANT

NCCCOMPLIANT

52 | STAIR EDGING SYSTEMS FOR CARPET © DTAC Pty Ltd 2021PEMKO®

STAIR EDGING SYSTEMS FOR CARPET

DTAC’s range of PEMKO® stair edging systems for carpet has transformed the manner in which you can detail a carpeted stair edge. The DTAC edging series provide a practical and aesthetically pleasing approach to slip prevention and carpet edge protection.

With several designs and finishes available for carpeted stairs, our range of edging and stair treads provides an NCC compliant solution with a flawless finish.

• Suitable for carpet thicknesses of 6-10mm

• Escutcheon plates available for stairs with exposed ends

• Designed to comply with AS 1428.1



DTAC DE0630G INSTALLATION

50 50 50

3 3 36.25 6.25 6.25

6.25 6.25 6.25

10 10 10

54 | STAIR EDGING SYSTEMS FOR CARPET © DTAC Pty Ltd 2021PEMKO®

CARPET SYSTEMS

PEMKO® CORDUROY CARPET EDGING SYSTEM 10X50X3

PEMKO® PINSTRIPE CARPET EDGING SYSTEM 10X50X3

PEMKO® PLEAT CARPET EDGING SYSTEM 10X50X3

DE0630GBRIGHT GOLD ANODISED

DE0630C DE0640C DE0650CNATURAL ANODISED NATURAL ANODISED NATURAL ANODISEDDE0630B

PRODUCT CODES: PRODUCT CODES: PRODUCT CODES:

BLACK ANODISED

P5GRIP

P4GRIP

P5GRIP


FIXINGScrew-fixed or adhesive (screws and plugs supplied).








LOCATIONIndoor

LENGTH2500mm







LENGTH2500mm




NCCCOMPLIANT

NCCCOMPLIANT

NCCCOMPLIANT

6550 55

33 36.256.25 6.25

6.256.25 6.25

1010 10

www.dtac.com.au STAIR EDGING SYSTEMS FOR CARPET | 55PEMKO®

CARPET SYSTEMS

PEMKO® URBAN CARPET EDGING SYSTEM 10X65X3

PEMKO® STITCH CARPET EDGING SYSTEM 10X50X3

PEMKO® SUEDE CARPET EDGING SYSTEM 10X55X3

DE0780CDE0660C DE0670C NATURAL ANODISEDGrey silicon carbide infill

NATURAL ANODISED NATURAL ANODISEDSlip resistant insert

DE0780B

PRODUCT CODES:PRODUCT CODES: PRODUCT CODES:


P5GRIP

P5GRIP

P5GRIP




LENGTH2500mm







LOCATIONIndoor

LENGTH2500mm






LOCATIONIndoor

LENGTH2500mm




NCCCOMPLIANT

NCCCOMPLIANT

NCCCOMPLIANT

56 | URBAN EDGE PROTECTORS © DTAC Pty Ltd 2021PEMKO®

URBAN EDGE PROTECTORSIn today’s modern landscape, seats, benches and garden beds are exposed to damage caused by skateboards, rollerblades and BMX bikes.

The damage and, in the most extreme cases, destruction of these unprotected surfaces, often render the exposed edge of a seat or bench unsafe and hazardous, costing thousands of dollars to repair or totally replace. In the case of timber seats, splinters are likely to occur. With stone and masonry cracks and chunks of material eventuate leaving the surface unsightly and very uncomfortable for the resting pedestrian.

DTAC Urban Edge Protectors assist in the deterrence and prevention of damage to exposed edges in urban environments.

Without DTAC Urban Edge Protectors, damage and injury may result requiring a vigilant monthly maintenance program to repair the constant destruction including chipping paint, cracked capping, waxed/marked walls and damaged handrails.

Positioned on the side of ledges, steps, planter boxes, garden edges, seating, benches and even handrails, the DTAC range of edge protectors can be placed at regular intervals in critical locations that are likely to be prone to damage. Installing DTAC bars and buttons will enable those in these situations to reclaim their spaces and avoid vast sums of time and money that would otherwise be spent cleaning and repairing their property.

DTAC’s edge protector range combines deterrence with asset protection. Their appearance is discreetly blended within their environment but pronounced enough to deter. Good building and urban design coupled with planning and appropriate installation can make DTAC Edge Protectors a design feature promoting a safe environment for all persons.

Prevention is always better than the cure. DTAC edge protectors whether incorporated at the conception of a project or retrofitted to an existing environment provide the opportunity for seamless integration through design, product selection and placement.

DTAC DEP0040 INSTALLATION

10 10

16 16

Ø35 Ø35

BUTTON ROUND


EDGE PROTECTOR BUTTON ROUND (STAINLESS STEEL)

EDGE PROTECTOR BUTTON ROUND (BRASS)

Manufactured in 316 marine grade stainless steel or solid brass, the DTAC round button edge protector helps to deter and prevent unwanted "grinding" damage from skateboards, rollerblades and BMX bikes.

BUTTON ROUND

PRODUCT CODE: DEP0010 PRODUCT CODE: DEP0300


FIXINGDrill and glue or diamond core and glue

LOCATIONOutdoor



LOCATIONOutdoor

10 10

16 16

Ø35 Ø35

BUTTON BEvELLED

www.dtac.com.au URBAN EDGE PROTECTORS | 59PEMKO®

EDGE PROTECTOR BUTTON BEVELLED (STAINLESS STEEL)

EDGE PROTECTOR BUTTON BEVELLED (BRASS)

Manufactured in 316 marine grade stainless steel or solid brass, the DTAC bevelled button edge protector helps to deter and prevent unwanted "grinding" damage from skateboards, rollerblades and BMX bikes.

BUTTON BEvELLED

PRODUCT CODE: DEP0020 PRODUCT CODE: DEP0301



LOCATIONOutdoor



LOCATIONOutdoor

5

5

16

16

110

15

BAR ThIN


EDGE PROTECTOR BAR (THIN)

Manufactured in 316 marine grade stainless steel, the DTAC thin bar edge protector helps to deter and prevent unwanted “grinding” damage from skateboards, rollerblades and BMX bikes.

BAR ThIN

PRODUCT CODE: DEP0040



LOCATIONOutdoor

10

10

16

16

15

110

BAR ThICK

www.dtac.com.au URBAN EDGE PROTECTORS | 61PEMKO®

EDGE PROTECTOR BAR (THICK)

Manufactured in 316 marine grade stainless steel, the DTAC thick bar edge protector helps to deter and prevent unwanted “grinding” damage from skateboards, rollerblades and BMX bikes.

BAR ThICK

PRODUCT CODE: DEP0060



LOCATIONOutdoor

62 | HANDRAIL TACTILE INDICATORS © DTAC Pty Ltd 2021PEMKO®

HANDRAIL TACTILE INDICATORSDTAC Handrail Tactile Indicators (HRTI’s) are used when handrails are not continuous and/or no tactile ground surface indicators are required.

HRTI's assist the visually impaired to safely negotiate stairs by indicating where a handrail and stairway ends and also help to deter and prevent unwanted "grinding" damage from skateboards, rollerblades and BMX bikes.

Handrails themselves should be designed and installed to comply with AS 1428.1 and with the NCC Section D3.8.

DTAC DHB0010 INSTALLATION

NCCCOMPLIANT

5

16

Ø10

STAINLESS STEEL

64 | HANDRAIL TACTILE INDICATORS © DTAC Pty Ltd 2021PEMKO®

HANDRAIL BUTTON (STAINLESS STEEL)

Manufactured in 316 marine grade stainless steel, the DTAC handrail button has been designed to meet the requirements of AS/NZS 1428.4.1.

STAINLESS STEEL

PRODUCT CODE: DHB0010

SUITABLE FOR SUBSTRATESMasonry, timber, metals

FIXINGDrill and glue


STAINLESS STEEL

66 | INDEX © DTAC Pty Ltd 2021PEMKO®

DCS0010 9DCS0020 9DE0100B 40DE0100C 40DE0100G 40DE0110B 40DE0110C 40DE0110G 40DE0200B 41DE0200C 41DE0210B 41DE0210C 41DE0300B 42DE0300C 42DE0310B 42DE0310C 42DE0400B 43DE0400C 43DE0410B 43DE0410C 43DE0500B 44DE0500C 44DE0510B 44DE0510C 44DE0630B 54DE0630C 54DE0630G 54DE0640C 54DE0650C 54DE0660C 55DE0670C 55DE0680B 46DE0680C 46DE0690B 46DE0690C 46DE0700B 47DE0700C 47DE0700CY 47DE0720MF 48DE0730MF 48DE0740MF 49DE0750MF 49DE0760MF 50DE0760MFY 50DE0780B 55DE0780C 55DEF0010B 51DEF0010Y 51DEF0020B 51

DEF0020Y 51DEP0010 58DEP0020 59DEP0040 60DEP0060 61DEP0300 58DEP0301 59DHB0010 64DIR0120 27DIR0130 27DIR0140 27DIRP0705B 28DIRP0705LG 29DIRP0705W 29DIRP0705Y 29DIT0010 32DIT0020 32DIT0030 34DIT0040 34DIT0070 33DIT0080 33DIT0090 35DIT0100 35DT0100 8DT0101 8DT0103 9DT0106 9DT0110 12DT0111 12DT0113 13DT0116 13DT0120 10DT0122 11DT0123 11DT0125 10DT0130 13DT0200 14DT0200Y 16DT0201 14DT0210 15DT0211 15DT0212 17DT0213 17DT0300 18DT0301 18DT0306 19DT0310 20DT0311 20DT0312 19

DT0400B 21DT0400Y 21DT0600B 22DT0600BL 23DT0600LG 22DT0600W 23DT0600Y 23DWU0010 36DWU0011 36DWU0012 37DWU0013 37DWU0014 37

INDEX

PEMKO® is a registered trademark of Raven Products Pty LtdDTAC® is a member of the Raven Group of companies

© DTAC Pty Ltd 2021 V10

DTAC PTY LTD

ABN 41 093 070 127ACN 093 070 127

DTAC PROJECT MANAGEMENT

PTY LTD

ABN 88 099 729 003ACN 009 972 9003

CONTACT DETAILS

T: 1300 793 478F: 1300 780 628

E: [email protected]

POSTAL ADDRESS

PO BOX 5059South MelbourneVIC Australia 3205

OFFICE ADDRESS

4/11-12 Phillip CourtPort Melbourne VIC

Australia 3207

ARCHITECTURAL FLOOR TACTILES, STAIR TREADS & EDGING SOLUTIONS

Documents

Transcript of ARCHITECTURAL FLOOR TACTILES, STAIR TREADS & EDGING SOLUTIONS