ARCAT | Free Building Product CAD Details, BIM, Specs ... · Web view1.)Greater than or equal to 21...

SECTION 27 20 00

COMMUNICATION DISTRIBUTION SYSTEMS

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2018 - 2020 ARCAT, Inc. - All rights reserved

** NOTE TO SPECIFIER ** Suttle; network solutions for intelligent homes.This section is based on the products of Suttle, which is located at:1001 E. Highway 212Hector, MN 55342Toll Free Tel: 888-881-7875Tel: 604-881-7875Email: request info ([email protected])Web: https://www.suttlesolutions.com/product-category/mediamax [ Click Here ] for additional information.Suttle specializes in wired network solutions for the intelligent home and business as well as edge of network solutions for providers.Suttle solutions simplify network deployment with products that are service provider approved and future-proof for new technologies and market demands.With design and manufacturing in Hector, MN, our products are known for their quality construction, reliable performance, and long-lasting durability, in compliance with the highest industry standards. ANSI/TIA-968-A and ANSI/TIA-1096 (included formerly in FCC Part 68 Subpart F)ISO 9001:2008 TL9000 - (H) R. 5.5/5.0 CertifiedTelcordia and SCTE-IPC specificationsUnderwriter Laboratories (UL)National Electrical Code (NEC)RoHS compliant materialsFounded in 1910, Suttle is a Communications Systems Inc company (NASDAQ: JCS).

1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

1.1.1 Panels, enclosures, and covers.

1.1.2 Modules.

1.1.3 Patch panels.

1.1.4 Jacks.

1.1.5 Faceplates.

1.1.6 Accessories.

1.1.6.1 Couplers and adapters.

1.1.6.2 Fiber accessories.

1.1.6.3 Inline xDSL filters.

1.1.6.4 Modular plugs.

1.1.6.5 Patch cords.

1.1.6.6 Wall mount xDSL filters.

1.1.7 Contractor panel kits.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

1.2.1 Section 07 84 13 - Penetration Firestopping.

1.2.2 Section 26 05 00 - Common Work Results for Electrical.

1.2.3 Section 26 05 48 - Vibration and Seismic Controls for Electrical Systems.

1.2.4 Section 26 27 16 - Electrical Cabinets and Enclosures.

1.3 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

1.3.1 American Council for Terminal Attachments (ACTA).

1.3.2 American National Standards Institute (ANSI):

1.3.2.1 ANSI T1.421 - In-Line Filter for Use with Voiceband Terminal Equipment Operating on the Same Wire Pair with High Frequency (up to 12 MHz) Devices.

1.3.3 Electronic Industries Alliance (EIA).

1.3.4 Federal Communications Commission (FCC):

1.3.4.1 Part 68 of the FCC rules (47 C.F.R. Part 68) - Governs the direct connection of Terminal Equipment (TE) to the Public Switched Telephone Network (PSTN), and to wireline carrier-owned facilities used to provide private line services.

1.3.5 National Electrical Manufacturer Association (NEMA):

1.3.6 Society of Cable Engineers (SCTE):

1.3.6.1 ANSI/SCTE 02 - Specification for "F" Port, Female, Indoor.

1.3.7 Telecommunications General Requirements (GR):

1.3.7.1 GR-3123-CORE - Generic Requirements for Indoor Fiber Distribution Hubs.

1.3.7.2 GR-3125-CORE - Outdoor Fiber Distribution Hubs - new GR for FTTP.

1.3.8 Telecommunications Industry Association (TIA):

1.3.8.1 TIA 1096 - Telecommunications Telephone Terminal Equipment Connector Requirements for Connection of Terminal Equipment to the Telephone Network.

1.3.8.2 TIA/EIA 568-C.2 - Balanced Twisted-Pair Telecommunication Cabling and Components Standard.

1.3.9 Underwriters Laboratories (UL):

1.3.9.1 UL-94-V0 - Standard for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances; burning stops within 10 seconds on a vertical specimen; drips of particles allowed if they are not inflamed.

1.3.9.2 UL 1863 - Standard for Communications-Circuit Accessories.

1.3.9.3 UL 2416 - Standard for Audio/Video, Information and Communication Technology Equipment Cabinet, Enclosure and Rack Systems.

1.3.10 Underwriters Laboratories Canada (ULc):

1.4 SUBMITTALS

1.4.1 Submit under provisions of Section 01 30 00 - Administrative Requirements.

1.4.2 Product Data:

1.4.2.1 Manufacturer's data sheets on each product to be used.

1.4.2.2 Preparation instructions and recommendations.

1.4.2.3 Storage and handling requirements and recommendations.

1.4.2.4 Installation methods.

1.4.3 Verification Samples: Submit two full size glass block units of each type, size, pattern and color.

1.4.4 Manufacturer's Certificates and Test Reports: Certify products meet or exceed specified requirements. Test reports should be within 12 months of bid date.

1.5 QUALITY ASSURANCE

1.5.1 Manufacturer Qualifications: Company specializing in manufacturing products specified in this section with a minimum ten years documented experience.

1.5.2 Products: Listed and classified by Underwriters Laboratories, Inc. as suitable for the purpose specified and indicated.

** NOTE TO SPECIFIER ** Include a mock-up if the project size and/or quality warrant taking such a precaution. The following is one example of how a mock-up on might be specified. When deciding on the extent of the mock-up, consider all the major different types of work on the project.

1.5.3 Mock-Up: Prior to starting work assemble sample panels for Architect's inspection and acceptance. Build in locations acceptable to the Architect. Construct sample panels with required accessories. Provide special features as directed.

1.5.3.1 Build sample panels for each different situation.

1.5.3.2 Retain sample panels during construction as a standard for judging completed work. Do not alter, move, or destroy sample panels until work is completed or removal is authorized.

1.6 DELIVERY, STORAGE, AND HANDLING

1.6.1 Store products in manufacturer's unopened packaging until ready for installation.

1.6.2 Store and handle in strict compliance with manufacturer's written instructions and recommendations.

1.6.3 Protect from damage due to weather, excessive temperature, and construction operations.

1.7 SEQUENCING

1.7.1 Ensure that products of this section are supplied to affected trades in time to prevent interruption of construction progress.

1.8 PROJECT CONDITIONS

1.8.1 Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's recommended limits.

1.9 WARRANTY

1.9.1 Provide manufacturers 10 Year limited Warranty.

2 PRODUCTS

2.1 MANUFACTURERS

2.1.1 Acceptable Manufacturer: Suttle, which is located at: 1001 E. Highway 212; Hector, MN 55342; Toll Free Tel: 888-881-7875; Tel: 604-881-7875; Email: request info ([email protected]); Web: https://www.suttlesolutions.com/product-category/mediamax

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

2.1.2 Substitutions: Not permitted.

2.1.3 Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

** NOTE TO SPECIFIER ** Delete article if not required.

2.2 PANELS ENCLOSURES WITH COVERS

2.2.1 Basis of Design: MediaMAX Panels as manufactured and supplied by Suttle. For enhanced CAT6 and wireless connectivity and house ONT and residential gateways. Utilizes plastic components wherever possible to minimize wireless interference. Enclosure venting for heat dissipation. For greenfield and brownfield applications providing added space to secure gateways and next generation ONT and battery backup systems within new or existing media panels. Compatible with SOHO Access modules. Deep-lid covers allow use of space in front of and above wiring panels.

** NOTE TO SPECIFIER ** Delete part number options not required.

2.2.1.1 Part Number: MXE-15P-1G2. 15 in (381 mm) MediaMAX panel (empty).

2.2.1.2 Part Number: MXE-15C-1G2. 15 in (381 mm) MediaMAX panel hinged vented cover.

2.2.1.3 Part Number: MXE-15E-1G2. 15 in (381 mm) MediaMAX panel (empty) with hinged vented cover.

2.2.1.4 Part Number: MXE-15C-4G2. 15 in (381 mm) MediaMAX panel expanded hinged vented deep-lid cover, 4 in (102 mm) deep.




2.2.1.8 Part Number: MXE-30E-2G2. 30 in (762 mm) MediaMAX panel with hinged vented cover, equipment shelves, adjustable mounting brackets, cable tie-downs, mounting screws and installation instructions.

2.2.1.9 Part Number: MXE-30E-3G2. 30 in (762 mm) MediaMAX panel with hinged vented cover, MXM-521 Gateway Termination Module, equipment shelves, adjustable mounting brackets, cable tie-downs, mounting screws, and installation instructions.






2.2.1.15 Color: White.

2.2.1.16 Listed: UL 2416, Issue 2, and ULc.

2.2.1.17 Material: High impact, flame retardant thermoplastic, UL 94-V0 (indoor) rated.

** NOTE TO SPECIFIER ** Delete dimensions options not required.

2.2.1.18 Dimensions MXE-15 Series:

2.2.1.18.1 Enclosures (HxWxD): 15.36 x 14.25 x 4.0 in (390 x 362 x 102 mm).

2.2.1.18.2 Standard Covers (HxWxD): 17.8 x 17.5 x 1.11 (454 x 444 x 28 mm).

2.2.1.18.3 Deep Lid Covers (HxWxD): 17.8 x 17.5 x 4.21 (454 x 444 x 107 mm).









2.2.1.21 Panel Accessories:

** NOTE TO SPECIFIER ** Delete accessories options not required.

2.2.1.21.1 Part Number: MXE-ACC-1. 1 equipment shelf, 2 equipment brackets, 2 cable spools, 2 tie brackets, 4 cable ties, 12 screws.

2.2.1.21.2 Part Number: MXE-ACC-2. 2 equipment shelves, 4 equipment brackets, 1 hook & loop strap 30 in (762 mm), 4 cable ties, 16 screws.

2.2.1.21.3 Part Number: MXE-CCK. Cable connector kit.

2.2.1.21.4 Part Number: MXE-DMK. Door mounting kit.

2.2.1.21.5 Part Number: MXE-ESB. 1 equipment shelf, 1 tie bracket, 1 hook and loop strap, 30 in (762 mm), 6 screws, 6 push-pin fasteners.

2.2.1.21.6 Part Number: MXE-MDK. Microduct kit.

2.2.1.21.7 Part Number: SAE-CAN. AC outlet kit, non-surge protected.

2.2.1.21.8 Part Number: SAE-GMT8. 2.5 in (64 mm) rubber grommets for enclosure entry and exit holes; 8 rubber grommets.

2.2.1.21.9 Part Number: SAE-LOCK. Lock accessory kit.

2.2.1.21.10 Part Number: SAE-PS3. 3-outlet AC power-strip with 34 in (864 mm) cord.

2.2.1.22 Panel Features:

2.2.1.22.1 Housing Solution for Premise Equipment:

2.2.1.22.2 1.)Mount ONTs, gateways, battery backups and wiring modules in a single enclosure

2.2.1.22.3 2.)Unique mounting bracket and shelf design accepts wide variety of equipment dimensions.

2.2.1.22.4 3.)180 degree hinged cover for easy access.

2.2.1.22.5 Optimized for wireless connectivity: Plastic construction minimizes electrical interference to wireless components.

2.2.1.22.6 Improved heat dissipation and fire resistance design:

2.2.1.22.7 1.)Unique ventilation design improves airflow and heat dissipation.

2.2.1.22.8 2.)Material: High impact, flame retardant thermoplastic, UL 94-V0 (indoor) rated.

2.2.1.22.9 3.)Meets latest fire resistance criteria for in-wall installation (UL 2416, Issue 2, Section 12.5, Communications Equipment Racks, Cabinets and Enclosures).

2.2.1.22.10 4.)Meets applicable Telcordia Generic Requirements, GR-63, for indoor housings.

2.2.1.22.11 Modular design for new construction and retrofit:

2.2.1.22.12 1.)Multiple cable ports for fiber cable and micro-duct terminations and power outlet locations.

2.2.1.22.13 2.)Convenient cable-tie locations along cabinet sides.

2.2.1.22.14 3.)Modular door design allows for physical separation and security of equipment and modules.

2.2.1.22.15 Flexible future-proof design and light weight plastic reduce total cost of ownership:

2.2.1.22.16 1.)Designed to accommodate new GPON, G.hn and G.fast equipment.

2.2.1.22.17 2.)Accepts fiber, copper, coax cables and terminations.

2.2.1.22.18 3.)Nearly 40 percent lighter than equivalent metal enclosures.

2.2.2 Basis of Design: SOHO Access Home Networking Enclosures as manufactured and supplied by Suttle. Fast, flexible, and clean distribution management solution for voice, data, video, and audio connections. Feature-rich, rugged enclosures.

2.2.2.1 Part Number: SAE-28NY. 28 in (711 mm) high enclosure.

2.2.2.1.1 Dimensions (HxWxD): 28 x 14.25 x 3.75 in (711 x 362 x 95 mm).

2.2.2.2 Part Number: SAE-28DCNY. 28 in (711 mm) high enclosure with door cover.

2.2.2.2.1 Dimensions (HxWxD): 30.3 x 16.5 x 4.10 in (770 x 419 x 104 mm),

2.2.2.3 Part Number: SADC-28VZ. 28 in (711 x mm) high door cover.

2.2.2.3.1 Dimensions (HxWxD): 30.3 x 16.5 x 0.35 in (770 x 419 x 9 mm).

2.2.2.4 Part Number: SAE-42NY. 42 in (1067 mm) high enclosure.


2.2.2.5 Part Number: SAE-42DDCNY. 42 in (1067 mm) high enclosure and door cover.


2.2.2.6 Part Number: SADDC-1428. 42 in (1067 mm) high dual door cover.


2.2.2.7 Part Number: SAM-EPM Enclosure Partition Module

2.2.2.8 Panel Features:

2.2.2.8.1 Material: Steel. 16 gauge, 0.0598 in (1.519 mm).

2.2.2.8.2 1.)Finish: Powder coat.

2.2.2.8.3 Mounting: Flush mounted between sixteen inch centered studs or surface mounted via recessed mounting holes.

2.2.2.8.4 Numerous cable entry knock-outs.

2.2.2.8.5 Vertical and horizontal mounting hole pattern

2.2.2.8.6 Multiple cable tie attachment points.

2.2.2.8.7 UL listed for security alarm and fire signaling applications.

2.2.2.8.8 Enclosures ship with necessary installation hardware.

2.2.2.8.9 Door covers provide a knock-out for a security lock.

2.2.2.8.10 Not Fire Rated: Enclosures should not be installed in a fire rated wall.


2.3 MODULES

** NOTE TO SPECIFIER ** Delete basis of design paragraphs not required.

2.3.1 Basis of Design: Gateway Termination Module as manufactured and supplied by Suttle. Supports up to five CAT6 data outputs and four 2-line voice outputs. Cable terminations utilize tool-less IDCs for improved transmission. Allows for changes in wiring to be made quickly and easily with no tools. The signal is simply patched from the voice or data source to the desired outlet.


2.3.1.1 Part Number: MXM-521. CAT6 gateway termination module.

2.3.1.1.1 Listed: UL and ULc.

2.3.1.1.2 Input:

2.3.1.1.3 1.)Six RJ45 jacks.

2.3.1.1.4 2.)Two RJ14 jacks.

2.3.1.1.5 Output: Eight 4-pair tool-less IDCs.

2.3.1.1.6 Wiring: 568A and 568B.

2.3.1.1.7 Dimensions (HxWxD): 3.5 x 6.5 x 1 in (89 x 165 x 25 mm).

2.3.1.2 Part Number: SAM-D8. CAT5e data/voice networking module. Supports up to 8 outlets and are designed with front punch down terminations. Allows for changes in wiring to be made quickly and easily. The circuit is simply patched from the source to the desired outlet.


2.3.1.2.2 Input: Eight RJ45 jacks.

2.3.1.2.3 Output: Eight 4-pair 110 IDCs.

2.3.1.2.4 Wiring: 568A.


2.3.1.3 Part Number: SAM-D8-C6. CAT6 data/voice networking module. Supports up to 8 outlets and are designed with front punch down terminations. Allows for changes in wiring to be made quickly and easily. The circuit is simply patched from the source to the desired outlet.




2.3.1.3.4 Wiring: 568A.


2.3.1.4 Part Number: SAM-D8-TC5. CAT5e data/voice networking module. Supports up to 8 outlets and are designed with tool-less IDCs. Allows for changes in wiring to be made quickly and easily with no tools. The signal is simply patched from the source to the desired outlet.




2.3.1.4.4 Wiring: 568A and 568B.


2.3.1.5 Part Number: SAM-D8-TC6. CAT6 data/voice networking module. Supports up to 8 outlets and are designed with tool-less IDCs. Allows for changes in wiring to be made quickly and easily with no tools. The signal is simply patched from the source to the desired outlet.




2.3.1.5.4 Wiring: 568A and 568B.


2.3.2 Basis of Design: MediaMAX Data Modules as manufactured and supplied by Suttle. Supports up to five CAT6 data outputs and four 2-line voice outputs. Cable terminations utilize tool-less IDCs for improved transmission. This module allows for changes in wiring to be made quickly and easily with no tools. The signal is simply patched from the voice or data source to the desired outlet.


2.3.2.1 Part Number: MXM-521. CAT6 Gateway Termination module.


2.3.2.1.2 Input:

2.3.2.1.3 1.)Six RJ45 jacks.

2.3.2.1.4 2.)Two RJ14 jacks.


2.3.2.1.6 Wiring: 568A and 568B.


2.3.2.2 Part Number: SAM-D8. CAT5e data/voice networking module. Supports up to 8 outlets and are designed with front punch down terminations. Allows for changes in wiring to be made quickly and easily. The circuit is simply patched from the source to the desired outlet.




2.3.2.2.4 Wiring: 568A.


2.3.2.3 Part Number: SAM-D8-C6. CAT6 data/voice networking module. Supports up to 8 outlets and are designed with front punch down terminations. Allows for changes in wiring to be made quickly and easily. The circuit is simply patched from the source to the desired outlet.




2.3.2.3.4 Wiring: 568A.


2.3.2.4 Part Number: SAM-D8-TC5. CAT5e data/voice networking module. Supports up to 8 outlets and are designed with tool-less IDCs. Allows for changes in wiring to be made quickly and easily with no tools. The signal is simply patched from the source to the desired outlet.




2.3.2.4.4 Wiring: 568A and 568B.


2.3.2.5 Part Number: SAM-D8-TC6. CAT6 data/voice networking module. Supports up to 8 outlets and are designed with tool-less IDCs. Allows for changes in wiring to be made quickly and easily with no tools. The signal is simply patched from the source to the desired outlet.




2.3.2.5.4 Wiring: 568A and 568B.


2.3.3 Basis of Design: MediaMAX Voice Modules as manufactured and supplied by Suttle.


2.3.3.1 Part Number: SAM-V8. 4 line in / 8 output Voice Distribution Module. Configured for up to 8 outlets each with up to 4 lines for basic telephone, fax, and modem service. Includes an RJ31X interface for security alarm system and one jack for testing and expansion.


2.3.3.1.2 Input: 4-pair 110 IDC.

2.3.3.1.3 Output: 4-pair 110 IDC to 8 outlets.

2.3.3.1.4 Alarm: RJ31X jack allows alarm auto-dialing access to line 1.

2.3.3.1.5 Wiring: T568A.


2.3.3.2 Part Number: SAM-V8M. 4 line in / 8 output Modular Voice Distribution Module. Configured for up to 8 RJ45 outlets for home run terminations, each with up to 4 lines for basic telephone, fax and modem service. Includes an RJ31X interface for a security/alarm system and one test jack to test the service provider line and internal lines.


2.3.3.2.2 Input: 4-pair 110 IDC.

2.3.3.2.3 Output: 8 RJ45 jacks.


2.3.3.2.5 Wiring: T568A.


2.3.3.3 Part Number: SAM-V10. 4 line in / 10 output Voice Distribution Module. Configured for up to 10 outlets each with up to 4 lines of basic telephone, fax, and modem service. Includes an RJ31X interface for a security/alarm system and one expansion/test jack to either bridge service to a Voice Expansion Module or to test the service provider and internal lines.


2.3.3.3.2 Input: 4-pair 110 IDC.

2.3.3.3.3 Output: 4-pair 110 IDC to 10 outlets.

2.3.3.3.4 Test/Expansion: 1 RJ45.


2.3.3.3.6 Wiring: 568A.


2.3.3.4 Part Number: SAM-MP4. 4 line input / 6 output multi-provider voice distribution module. Accepts up to four incoming lines, routes them to six locations, and offers a security system interface jack (for signal from an alarm panel) and test jacks for input and output.


2.3.3.4.2 Input: 1 x 4-pair 110 IDC and 4 x RJ11.

2.3.3.4.3 Output: 6 x 4-pair 110 IDC.

2.3.3.4.4 Alarm: RJ45 jack (dip switch) allows alarm auto-dialing access to line 1.

2.3.3.4.5 Wiring: T568A.


2.3.4 Basis of Design: MediaMAX Video Modules as manufactured and supplied by Suttle. Video splitter modules provide high quality and reliable video distribution with industry approved, digital ready splitters that meet ANSI/SCTE standards. Angled mounting brackets maximize enclosure space, minimize cable strain, and facilitate better cable management and ease of installation.


2.3.4.1 Part Number: SAM-RF3. 1 x 3 RF splitter - 1 GHz.

2.3.4.1.1 Insertion Loss (Maximum): 7.0 dB.

2.3.4.1.2 Isolation (Minimum): 22 dB.

2.3.4.1.3 Return Loss In (Minimum): 20 dB.

2.3.4.1.4 Return Loss Out (Minimum): 20 dB.

2.3.4.2 Part Number: SAM-RF4. 1 x 4 RF splitter - 1G Hz.




2.3.4.2.4 Return Loss Out ((Minimum): 20 dB.







2.3.4.4.1 Insertion Loss (Maximum): 12 dB.




2.3.4.5 Part Number: SAM-RFH3. 1 x 3 RF splitter - 3 GHz.
















2.3.4.8.1 Insertion Loss (Maximum): 15 dB.




2.3.4.9 Frequency Range: 5 to 2400 MHz.

2.3.4.10 RFI Shielding: 130 dB.

2.3.4.11 Operating Temperature: Minus 40 to 140 degrees F.

2.3.4.12 "F" Ports: Meet ANSI/SCTE 02.

** NOTE TO SPECIFIER ** Delete dimension option not required.

2.3.4.13 Dimensions for SAM-RF3 (HxWxD): 3.0 x 6.5 x 2.0 in (76 x 165 x 51 mm).

2.3.4.14 Dimensions: (HxWxD): 2.75 x 6.5 x 2.8 in (70 x 165 x 71 mm).

2.3.5 Basis of Design: SOHO Access 8-port Universal Patch Module as manufactured and supplied by Suttle. For custom patch configurations for patching phone, data, video or even fiber using SpeedStar connectors. A great solution for accommodating CorroShield corrosion protection jacks, or CAT6 jacks that aren't available in a typical patch panel.

2.3.5.1 Part number: SAM-SP8. 8-port universal patch panel.

2.3.5.2 Listed UL and ULc.

2.3.5.3 For use with SOHO Access Enclosures.

2.3.5.4 Phone, Data, Video, or even fiber patching on a single panel.

2.3.5.5 Mix and Match SpeedStar jacks to get exactly what is needed.

2.3.5.6 CAT6 capable with STAR6000C6 jacks.

2.3.5.7 Accepts SpeedStar CorroShield jacks for added corrosion protection in humid environments.

2.3.5.8 Dimensions (HxWxD): 3.5 x 6.5 x 3 in (89 x 165 x 76 mm).

2.3.6 Basis of Design: 3 in (76 mm) Blank Mounting Plate as manufactured and supplied by Suttle.

2.3.6.1 Part number: SAM-B.

2.3.6.2 Blank mounting plate for MediaMAX Panels and SOHO Access enclosures.

2.3.6.3 Includes double-stick adhesive foam and mounting pins.

2.3.6.4 Dimensions (HxW): 3 x 5.5 in (76 x 140 mm) mounting surface.

2.3.7 Basis of design: Push-Pin Replacement Kit (10 pieces) as manufactured and supplied by Suttle.

2.3.7.1 Part Number: SAM-NYL.

2.3.7.2 Replacement push-pins, plungers and grommets.

2.3.7.3 One package of 10 push-pins.

2.3.7.4 Tool-less push-pin fasteners.

2.3.7.5 Plastic composition does not interfere with wireless devices.

2.3.7.6 Quickly secure modules, brackets, and equipment shelves into MediaMAX Panels.


2.4 PATCH PANELS

2.4.1 Basis of Design: Patch panel as manufactured and supplied by Suttle. Steel construction with rolled edges to eliminate flexing. Rear input connectors are 110 IDC, front output jacks are RJ-45. Connectors can be wired in either 568A or 568B configurations.


2.4.1.1 Part Number: STAR19110C6-12. 12-port, CAT6 patch panel, 568A/B wiring, wall-mount (bracket included) - 3.25 H x 10 W x 2 D in (83 H x 254 W x 51 D mm).

2.4.1.2 Part Number: STAR19110C6-24. 24-port, CAT6 patch panel, 568A/B wiring, 19 in (483 mm) rack-mountable - 1RU 19 in (483 mm) rack.

2.4.1.3 Part Number: STAR19110C6-48. 48-port, CAT6 patch panel, 568A/B wiring, 19 in (483 mm) rack-mountable - 2RU 19 in (483 mm) rack.

2.4.1.4 Part Number: STAR191RU-12B. 12-port blank patch panel accepts all SpeedStar Modular Jacks (Copper, Fiber and Coax) and includes an integrated cable management bracket.

2.4.1.4.1 Accessories:


2.4.1.4.2 1.)Part Number: STAR6000C6T. MediaMAX Jack - Tool-less Category 6 Jack

2.4.1.4.3 2.)Part Number: 2-7001. CAT5e Modular Data Jack

2.4.1.4.4 3.)Part Number: 2-7005. CAT3 Modular Voice Jack

2.4.1.4.5 4.)Part Number: STAR600V6-RC. CAT3 Modular Voice Jack with CorroShield gel.

2.4.1.4.6 5.)Part Number: STAR500F-C. 3GHz F81 Barrel Connector

2.4.1.4.7 6.)Part Number: STAR500SCGR-T. SC Fiber Adapter with trap door kit

2.4.1.5 Listed: UL and ULc.

2.4.1.6 Exceeds TIA/EIA-568-B Cat 6 performance specifications.

2.4.1.7 Supports bandwidth beyond 250 MHz.

2.4.1.8 Write-on label and number designations provide easy identification.

2.4.1.9 Rear cable management bar provides cable strain relief.

2.4.1.10 Multiple cable tie locations facilitate cable dressing.

2.4.1.11 Wiring: T568A or T568B.

2.4.1.12 Insertion: greater than 750 cycles.

2.4.1.13 Jack Housing: High impact, flame retardant thermoplastic, UL 94-V0 (indoor) rated.

2.4.1.14 IDC Blocks: Tin lead plated connector accepts 22-26 AWG solid UTP cable.

2.4.1.15 Contact Pressure: Greater than 0.22 lbs (100 grams).

2.4.1.16 Insulation Resistance: 500 megohms.

2.4.1.17 Contact Resistance: Less than 10 millohms.

2.4.1.18 Voltage/Current: Less than 140 VDC at 1.5 amps.

2.4.1.19 Dielectric Withstand: greater than 1000 VAC RMS at 60Hz.

2.4.1.20 Safety: Complies with Part 68, FCC Rules.


2.5 JACKS

** NOTE TO SPECIFIER ** Delete basis of design options not required.

2.5.1 Basis of Design: SpeedStar CAT5e Modular Data Jack as manufactured and supplied by Suttle. Exceeds TIA/EIA 568-C.2 specifications for Category 5e component performance. For use with SpeedStar faceplates, bezels and surface mount housings. Termination requires use of a punch down installation tool. Available in a white housing, each jack comes with multi-color bezels for your installation.

2.5.1.1 Part Number: 2-7001. 8-Position, 8-Conductor Jack, 568A/B, 110 IDC Block.

** NOTE TO SPECIFIER ** Delete color options not required.

2.5.1.2 Color: Green.

2.5.1.3 Color: Electrical ivory.

2.5.1.4 Color: Red.

2.5.1.5 Color: Yellow.

2.5.1.6 Color: Blue.

2.5.1.7 Color: Light almond.


2.5.1.9 Color: Orange.


2.5.1.11 Easy installation from rear of faceplate.

2.5.1.12 Compatible with SpeedStar products (bezels, faceplates, and surface mount housings).

2.5.1.13 Terminates with standard 110 termination tools.

2.5.1.14 Dust covers for IDC terminations.

2.5.1.15 Wiring: 568A or 568B.

2.5.1.16 Insertion Life: 750 insertions.

2.5.1.17 Housing: High impact, flame retardant thermoplastic, UL 94-V0 (indoor) rated.

2.5.1.18 Contacts: 50 micro-inch (0.00127 mm) hard gold plating minimum with 100 micro-inch (0.00254 mm) nickel.

2.5.1.19 Contact Pressure: greater than 0.22 lbs (0.22 lbs (100 grams).

2.5.1.20 Contact Resistance: Less than 10 milliohms.

2.5.1.21 Insulation Resistance: Greater than 500 megohms.

2.5.1.22 Current/Voltage:

2.5.1.22.1 140 VDC at 1.5 amps (2-7001).

2.5.1.22.2 140 VDC at 2 amps (STAR600V6 and 8),

2.5.1.23 Dielectric Withstand: 1000 VAC RMS at 60Hz.

2.5.2 Basis of Design: SpeedStar CAT3 Modular Voice Jack as manufactured and supplied by Suttle. Provide a modular solution for delivering multiple lines of voice service. Jacks with CorroShield gel protects against corrosion that can lead to loss of service and costly service calls. For use with SpeedStar faceplates, bezels and surface mount housings. The jack terminates up to 3-pair of 22 to 26 AWG wire.

** NOTE TO SPECIFIER ** Delete part number option not required.

2.5.2.1 Part Number: 2-7005. 6-Position, 6-Conductor Jack, 110 IDC Block.

2.5.2.2 Part number: STAR600V6-RCB. 6-Position, 6-Conductor Jack with Corroshield gel, 110 IDC Block.




2.5.2.5 Color: Red.








2.5.2.13 Compatible with SpeedStar products (bezels, faceplates, and surface mount housings.


2.5.2.15 Dust covers for IDC terminations.

2.5.2.16 CorroShield gel equipped jacks protects from dust, moisture, and other components.

2.5.2.16.1 Gelguard gel in the CorroShield products, is a nonhazardous mixture per OSHA's Hazard Communications Standard (29 CFR 1910.1200). An MSDS is not required. A product safety bulletin is available upon request.

2.5.2.17 Wiring: USOC.


2.5.2.19 Housing: High impact, flame retardant thermoplastic, UL 94-V0 rated.

2.5.2.20 Contacts: 50 micro-inch (0.00127 mm) hard gold plating minimum with 100 micro-inch (0.00254 mm) nickel.

2.5.2.21 IDC Blocks: Tin lead plated connector accepts 22-26 AWG solid and stranded UTP cable.

2.5.2.22 Wire Retention:

2.5.2.22.1 Horizontal AWG: 8 lbs (3.63 kg).

2.5.2.22.2 Vertical pullout force: 2 lbs (0.91 kg).

2.5.2.23 Contact Pressure: Greater than 0.22 lbs (0.22 lbs (100 grams).



2.5.2.26 Current/Voltage:

2.5.2.26.1 140 VDC at 1.5 amps (2-7005).

2.5.2.26.2 140 VDC at 2 amps (STAR600V6 and 8).

2.5.2.27 Dielectric Withstand: 1000 VAC RMS at 60Hz minimum.

2.5.3 Basis of Design: SpeedStar SC Adapter with trap door as manufactured and supplied by Suttle. Provides instant coupling of fiber connectors within a miniature housing. The integrated spring-loaded trap door automatically closes when a SC connector is not connected or is removed, shielding potentially harmful laser light. Its design enables the adapter to be installed into any SpeedStar faceplate or housing allowing for the product to be integrated into many different form factors and a variety of different architectures.


2.5.3.1 Part Number: STAR500SCGR-T. SC adapter with trap door.

2.5.3.2 Part Number: STAR500HSC-T. SC adapter housing with trap door only, no SC adapter.

** NOTE TO SPECIFIER ** Delete color option not required.



2.5.3.5 Integrated trap door shields potentially harmful laser light.

2.5.3.6 SpeedStar design allows for use in a wide variety of products for maximum flexibility.

2.5.3.7 Materials: High impact flame retardant thermoplastic, UL 94-V0 (indoor) rated.

2.5.3.8 Connector Type: SC / SC simplex fiber coupler.

2.5.3.9 Cable Retention: Greater than 15 lbs (6.8 kg).

2.5.3.10 Back Reflection (typical - limit): 65 dB - minus 60 dB.

2.5.3.11 Insertion Loss (typical - limit): 0.1 dB - 0.3 dB.

2.5.4 Basis of Design: CAT6 Modular Data Jack as manufactured and supplied by Suttle. Performance exceeding TIA/EIA-568-C.2 channel and link standards. Provides quicker and easier wire termination. Angled IDC connector pins aid in maintaining maximum Category 6 performance, providing a gas tight connection and improved cable retention.


2.5.4.1 Part Number: STAR6000C6. Category 6 jack, 8-position, 8-conductor module.

2.5.4.2 Part Number: STAR6000C6-SB. Category 6 jack, 8-position, 8-conductor module.




2.5.4.5 Color: Red.








2.5.4.13 Modules are compatible with SpeedStar or Series 2000 line of bezels, faceplates and surface mount housings.

2.5.4.14 IDC Cap provides protective strain relief.


2.5.4.16 Complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA.

2.5.4.17 Wiring: 568A/568B color-coded labeling for easy wire identification.


2.5.4.19 Housing: High impact, flame retardant thermoplastic, UL 94-V0 (indoor) rated.

2.5.4.20 Contacts: 100 micro-inch nickel with minimum 50 micro-inch of gold.

2.5.4.21 IDC Blocks: Tin lead plated connector accepts 22 to 26 AWG solid UTP cable.




2.5.4.25 Voltage/Current: 140 VDC at 2.0 amps.

2.5.4.26 Dielectric Withstand: 1000 VAC RMS at 60 Hz.

2.5.5 Basis of Design: MediaMAX Jack - Tool-less Category 6 Jack as manufactured and supplied by Suttle. Performance exceeding TIA/EIA-568-C.2 channel/link and component standards. Provides consistent, reliable, and easier wire termination. IDC with tool-less toggle connections aid in maintaining maximum Category 6 performance, providing a gas tight connection and improved cable retention.

2.5.5.1 Part Number: STAR6000C6T. Category 6 jack, 8-position, 8-conductor module, tool-less IDC with 8 color-coded bezels.




2.5.5.4 Color: Red.






2.5.5.10 Listed to UL and ULc.

2.5.5.11 Allows mounting to both SpeedStar and generic keystone wall plates.

2.5.5.12 Tool-less toggle eliminates individual wire punch-down and provides consistent IDC termination.

2.5.5.13 Unique "dual-toggle" design helps preserve wire twist during assembly.

2.5.5.14 Jack installs easily from rear of wall plate.

2.5.5.15 Complies with TIA 1096 (formerly Part 68 of FCC Rules).

2.5.5.16 Material: High impact, flame retardant thermoplastic, UL 94-V0 (indoor) rated.

2.5.5.17 Individually packaged with assorted color-coded bezels.

2.5.5.18 No extra parts required for wire termination.

2.5.5.19 No excess wire trimming required.

2.5.5.20 Wiring: 568A or 568B color-coded labeling for easy wire identification.



2.5.5.23 IDC Blocks: Tool-less toggles.

2.5.5.24 Conductor size: 22 to 24 gauge.




2.5.5.28 Voltage/Current: 140 VDC at 2.0 amps.

2.5.5.29 Dielectric Withstand: 1000 VAC RMS at 60 Hz.

2.5.6 Basis of Design: MediaMAX Category 6A 10 Gig Data Jack as manufactured and supplied by Suttle. Performance exceeding TIA/EIA-568-C.2 channel/link and component standards. Universal jack solution. Color coding bezels for network identification. Punch down functionality reducing material cost while providing ease of set-up and installation.

2.5.6.1 Part Number: STAR6APDJ. Category 6A 10 Gig data jack, 8-position, 8-conductor jack, 568/B wiring, 110 DC connections, includes color-coded bezels.

2.5.6.2 Part Number: STAR6APDJ-BP. Package of 20 jacks and 25 white bezels - Bulk pack.

2.5.6.3 Part Number: STARBEZ. Package of 25 color-coded bezels. Package contains 25 of the same color bezels




2.5.6.6 Color: Red.






2.5.6.12 Standards Compliance:

2.5.6.12.1 Listed to UL and ULc.

2.5.6.12.2 Part 68 of FCC Rules and requirements adopted by the ACTA.

2.5.6.12.3 Exceeds Category 6A TIA/EIA-568-C.2 specifications for channel and link performance.

2.5.6.13 Angled IDC Pins: Aid in maintaining maximum Cat 6A performance. Provides a gas tight connection and improved cable retention.

2.5.6.14 Termination Tools: Standard 110.

2.5.6.15 Compatible with Suttle SpeedStar bezels, faceplates and surface mount housings.

2.5.6.16 IDC Cap: Provides protective strain relief.

2.5.6.17 Easy installation from rear of faceplate

2.5.6.18 Wiring: 568A or 568B color-coded labels facilitate termination.


2.5.6.20 Housing: High impact, flame retardant thermoplastic, UL 94V-0 (indoor) rated.


2.5.6.22 IDC Blocks: Tin lead plated connector accepts 22-24 AWG solid UTP cable.




2.5.6.26 Pin to Pin Voltage: 1000 Volts DC or AC peak, 0.5 mA leakage current.

2.5.6.27 Pin to Shield Voltage: 1500 Volts DC or AC peak, 0.5 mA leakage current.

2.5.6.28 Fault Current:

2.5.6.28.1 600 Volts AC, 2.2 Amps, 50 to 60 Hz, 30 minutes.

2.5.6.28.2 700 Volts AC, 7.0 Amps, 50 to 60 Hz, 5 seconds.


2.6 FACEPLATES

** NOTE TO SPECIFIER ** Delete paragraph options not required.

2.6.1 Downward Facing Plates:

** NOTE TO SPECIFIER ** Delete basis of design paragraph options not required.

2.6.1.1 Basis of Design: Downward Oriented Faceplates as manufactured and supplied by Suttle. Employs jacks mounted at a 90 degree downward allowing cables to be run down, and out, at a much lower risk to damage. Smooth, shatter-resistant faceplate protects installation from collateral damage.


2.6.1.1.1 Part Number: 2-6500. Single gang plate with 4 insert styles.

2.6.1.1.2 Part Number: 2-6501. Single gang plate with 2-port F81 insert, connectors not included.

2.6.1.1.3 Part Number: 2-6502. Single gang plate with 2-port SpeedStar insert, connectors not included.

2.6.1.1.4 Part Number: 2-6503. Single gang plate with CablePass feed-through insert.

2.6.1.1.5 Part Number: 2-6504. Single gang plate with F81/SpeedStar insert, connectors not included.

2.6.1.1.6 Part Number: 2-6522D. Double gang plate with 3-port SpeedStar insert, connectors not included.

2.6.1.1.7 Part Number: 2-6523D. Double gang plate with CablePass feed-through


2.6.1.1.8 Color: Electric ivory.

2.6.1.1.9 Color: White.


2.6.1.1.11 Accommodates:

2.6.1.1.12 1.)F81 barrel connectors.

2.6.1.1.13 2.)SpeedStar connectors.

2.6.1.1.14 3.)CablePass feed-through.

2.6.1.1.15 New construction or replacement of existing plates.

2.6.1.1.16 Material: High impact, flame retardant thermoplastic, UL 94-V0 (indoor) rated.

2.6.1.1.17 Dimensions:

2.6.1.1.18 1.)Single Gang (HxWxD): 5.04 x 3.13 x 1 in (128 x 80 x 25 mm).

2.6.1.1.19 2.)Double Gang (HxWxD): 5.04 x 5 x 1 in (128 x 127 25 mm).

2.6.1.2 Basis of Design: Fiber Interface Wall Plate as manufactured and supplied by Suttle. In-home fiber interconnect point in a compact single gang size. Allows flexibility in access and storage. Access options include inside connections or external connections at end or at an angle.


2.6.1.2.1 Part Number: CON-13X5-85. Single gang fiber wall plate with two covers, SC/APC adapter and splice holder inside with fiber storage.

2.6.1.2.2 Part Number: CON-13X6-85. Single gang fiber wall plate with two covers, a SC/APC adapter exiting the right side at an angle, and splice holder inside with fiber storage.

2.6.1.2.3 Part Number: CON-13X5-85U. Single gang fiber wall plate with two covers, SC/UPC adapter and splice holder inside with fiber storage.

2.6.1.2.4 Part Number: CON-44X7-50. Single gang fiber wall plate with one cover, SC/APC adapter one blank exiting the right side, and internal splice holder with fiber storage.

2.6.1.2.5 Part Number: CON-44X7-85. Single gang fiber wall plate with one cover, fiber adapter one blank exiting the right side, and internal splice holder with fiber storage.

2.6.1.2.6 Listed: UL and ULC.

2.6.1.2.7 Junction box mounting platform.

2.6.1.2.8 Fiber slack storage spool with up to 5 ft (1524 mm) of 0.118 in (3 mm) fiber slack storage.

2.6.1.2.9 Can be configured for fiber connection accessible from outside or protected inside the cover.

2.6.1.2.10 Snap on cover with security screw.

2.6.1.2.11 Vertical or horizontal distribution.

2.6.1.2.12 Angled or straight exit.



2.6.1.3 Basis of Design: Convergence Wall Plate as manufactured and supplied by Suttle. For managing multiple cable types within a facility. Direct surface mounting on a wall or over an existing single or double gang junction box, with versions for managing connections with twisted pair wire (voice and data), coax cable or fiber cable. Ideal for managing inputs and outputs for FTTH deployments using desktop ONTs. Compatible with SpeedStar connectors.


2.6.1.3.1 Part number: CON-2216. Configured for use with a coax splitter (1x2, 1x3, 2x2, 2x3) or ground block and an external SC/APC adapter port, internal fiber management spools, and blanks for two additional SpeedStar connectors (voice or data jacks).

2.6.1.3.2 Part number: CON-2221. Configured with 6 blank openings on bottom for use with SpeedStar connectors (voice and data jacks, SC/APC fiber adapter) and fiber management spools.


2.6.1.3.3 Color: Electrical Ivory.


2.6.1.3.5 Standards Compliance:

2.6.1.3.6 1.)Listed: UL and ULc.

2.6.1.3.7 Distribution point for any combination of cabling (Fiber, Coax, Twisted Pair).

2.6.1.3.8 Configurations with slack management for up to 6 ft (1829 mm) of 900 im, 0.063 in (1.6 mm), 0.118 in (3 mm), and 0.189 in (4.8 mm) fiber optic cable.

2.6.1.3.9 Supports fiber adapters, voice jacks, data jacks and coax splitters or ground blocks together in a compact wall plate.

2.6.1.3.10 Convenient knockouts on cover and base.

2.6.1.3.11 Designed to use SpeedStar voice and data jacks.

2.6.1.3.12 Entry hole to allow a No. 10 AWG ground wire for coax devices (when configured for coax).

2.6.1.3.13 Slotted key mounting holes to prove easy installation onto a j-box.

2.6.1.3.14 Captive 3/8 in (9 mm) hex screw to secure the cover to the base with 216-tool.

2.6.1.3.15 Fiber Adapter: SC/APC.



2.6.1.4 Basis of Design: Flush Mount Open Back Retrofit Box as manufactured and supplied by Suttle. Flush mount retrofit junction box with open back, rotating clamp arms.

2.6.1.4.1 Part Number: 147-2.

2.6.1.4.2 Flush mount.

2.6.1.4.3 Rotating clamp arms.

2.6.1.4.4 Open back.

2.6.1.4.5 For retrofit applications.

2.6.2 Flush Mounting Faceplates:

** NOTE TO SPECIFIER ** Delete basis of design paragraph options not required.

2.6.2.1 Basis of Design: SpeedStar Single and Double Gang Smooth Faceplates: as manufactured and supplied by Suttle. For use with SpeedStar modular multimedia connectors. Each housing provides simple snap-in connector installation. Mounts over standard J-box (mounting screws included).


2.6.2.1.1 Part Number: 2-2501. 1-port faceplate, single gang, smooth finish.




2.6.2.1.5 Part Number: 2-2504A. Angled 4-port faceplate, single gang, smooth finish.


2.6.2.1.7 Part Number: 2-2501M. 1-port faceplate, oversized, single gang, smooth finish.




2.6.2.1.11 Part Number: 2-2501-S. 1-port faceplate, single gang, stainless steel.




2.6.2.1.14 Listed: UL and ULc

2.6.2.1.15 Material: High impact, flame retardant thermoplastic, UL 94-V0 (indoor) rated and 22 AWG stainless steel.

2.6.2.1.16 Dimensions (HxWxD):

2.6.2.1.17 1.)Single Gang: 4.57 x 2.81 in (116 x 71 mm).

2.6.2.1.18 2.)Oversized: 4.875 x 3.125 x 0.2 in (124 x 79 x 5 mm).

2.6.2.1.19 3.)Single Gang (Stainless): 4.5 x 2.75 x 0.29 (114 x 70 x 7 mm).

2.6.2.2 Basis of Design: SpeedStar Modular Multimedia Faceplates: as manufactured and supplied by Suttle. Commercial-grade faceplates for use with Suttle's line of rear-loading snap-in multimedia modules and colored bezels. Rugged, textured faceplates feature top and bottom label locations for quick identification.


2.6.2.2.1 Part Number: STAR500S1. 1-port, single gang.




2.6.2.2.5 Part Number: STAR500AF. 4-port angled, single gang.





2.6.2.2.9 Standard or insert style faceplates for flexible configuration.

2.6.2.2.10 Fits standard NEMA boxes.



2.6.2.3 Basis of Design: SpeedStar Mounting Frame, 2-Port as manufactured and supplied by Suttle. Fit standard floor and wall J-Box designs and utilize standard electrical faceplates. For use with Suttle's line of rear-loading snap-in multimedia modules and colored bezels.


2.6.2.3.1 Part Number: STAR1062. 2-port mounting frame.

2.6.2.3.2 Part Number: 860A. Duplex electrical style faceplate.





2.6.2.3.6 Fits standard NEMA boxes and electrical faceplates.


2.6.2.3.8 Write on label designations for easy identification.

2.6.2.3.9 Available in 2 or 4-ports.

2.6.2.3.10 Modules snap-fit from the rear.

2.6.2.3.11 Inserts provide versatile module configuration options.

2.6.2.4 Basis of Design: SpeedStar Barrel Connector 3GHz F81 as manufactured and supplied by Suttle.

2.6.2.4.1 For SpeedStar faceplates and housings.

2.6.2.4.2 Type F connector.

2.6.2.4.3 Frequency Range: 5 to 3000 MHz.

2.6.2.5 Basis of Design: SpeedStar Blank Connector Insert as manufactured and supplied by Suttle.

2.6.2.5.1 Part Number: STAR500B.




2.6.2.5.4 Fits SpeedStar faceplates, wall plates, and housings.

2.6.2.6 Basis of Design: Blank Faceplate, Single Gang as manufactured and supplied by Suttle. Flush mount design. Fits industry-standard J boxes. Includes color-matched mounting screws.


2.6.2.6.1 Part Number: 107. Single gang blank faceplate.

2.6.2.6.2 Part Number: 108. Double gang blank faceplate.






2.6.2.6.7 2.)Conforms to NEMA and ANSI standards.


2.6.2.7 Basis of Design: SpeedStar Oversized Surface Mounting Box as manufactured and supplied by Suttle. Countoured to match SpeedStar faceplates but oversized to accommodate most faceplates. Rear cable entry and mounting holes to fit most brackets and tear outs on top, bottom and sides for raceway entry. Mounting over a standard outlet box requires a 43A bracket.


2.6.2.7.1 Part Number: STARMBD. SpeedStar single gang oversized mounting box; includes two mounting screws and one adhesive pad.

2.6.2.7.2 1.)Dimensions (HxWxD): 5.25 x 3.34 x 2.25 in (133 x 85 x 57 mm).

2.6.2.7.3 Part Number: STARMBDD. SpeedStar double gang oversized mounting box; includes two mounting screws and one adhesive pad.

2.6.2.7.4 1.)Dimensions (HxWxD): 5.25 x 5.34 x 2.25 in(133 x 136 x 57 mm).



2.6.2.7.6 Color: Light almond.


2.6.2.7.8 Applications: Copper, coax and fiber.

2.6.2.7.9 Race way knockouts: 4 sides.

2.6.2.7.10 Faceplate Mounting: Threaded insert, 2 places.

2.6.2.7.11 Can be mounted on a flat surface.

2.6.2.7.12 Cable may be dressed on all sides, or through the back.

2.6.2.7.13 Supports STAR500S, STAR5501, STAR500AF, STAR5501MM and 107 faceplates.

2.6.2.7.14 1.)The outside contour matches SpeedStar face plates. However, the box is oversized to fit most conventional rectangular single gang faceplates.

2.6.2.7.15 Complies with TIA/EIA 568-A Cable Bend Radius.

2.6.2.8 Basis of Design: Wall Jack Assembly as manufactured and supplied by Suttle. For use with wall mounted, 8-conductor modular telephone sets. The stainless steel cover assembly has two lugs, which mate with the corresponding keyhole slots in the telephone base plate or adapter. Includes a STAR600B Channel Six Performance Jack Module wired 568B and matching bezel. Exceeds TIA/EIA-568-B.2 specifications for Category 5e component performance.

2.6.2.8.1 Part Number: STAR630B8. 8-Position, 8-Conductor, 568B, 110 IDC Block jack module, stainless steel faceplate.


2.6.2.8.3 Terminates with standard 110 termination tools.

2.6.2.8.4 Dust covers for IDC terminations.

2.6.2.8.5 Wiring: 568B pinout.

2.6.2.8.6 Insertion Life: 750 insertions.

2.6.2.8.7 Housing: High impact, flame retardant thermoplastic, UL 94-V0 (indoor) rated.

2.6.2.8.8 Contacts: 50 micro-inch (0.00127 mm) hard gold plating minimum with 100 micro-inch (0.00254 mm) nickel.

2.6.2.8.9 Connection: Binding screws.

2.6.2.8.10 Contact Pressure: Greater than 0.22 lbs (100 grams).

2.6.2.8.11 Insulation Resistance: Greater than 500 megohms.

2.6.2.8.12 Contact Resistance: Less than 10 milliohms.

2.6.2.8.13 Current/voltage: Less than 140 VDC at 2 amps.

2.6.2.9 Basis of Design: SpeedStar Flush Mount Connector Kits as manufactured and supplied by Suttle. Combine a faceplate with one or two voice grade, data, voice/data or gel filled, connectors with bezels. Flush mounting smooth finished faceplates that are compatible with SpeedStar modular connectors. Snap-in connector installation with colored bezels for identification. Mounts over standard J-box (mounting screws included).


2.6.2.9.1 Part Number: STAR2501-G1-52 Kit. 1-port faceplate with one gel filled STAR600V6-RCB voice grade connector. Electrical ivory.

2.6.2.9.2 Part Number: STAR2501-G1-85 Kit. 1-port faceplate with one gel filled STAR600V6-RCB voice grade connector. White.

2.6.2.9.3 Part Number: STAR2502-G2-52 Kit. 2-port faceplate with two gel filled STAR600V6-RCB voice grade connectors. Electrical ivory

2.6.2.9.4 Part Number: STAR2502-G2-85 Kit. 2-port faceplate with two gel filled STAR600V6-RCB voce grade connectors. White.

2.6.2.9.5 Part Number: STAR2501-V1-52 Kit. 1-port faceplate with one 2-7005 voice grade connector. Electrical ivory.

2.6.2.9.6 Part Number: STAR2501-V1-85 Kit. 1-port faceplate with one 2-7005 voice grade connector. White.

2.6.2.9.7 Part Number: STAR2502-V2-52 Kit. 2-port faceplate with two 2-7005 voice grade connectors. Electrical ivory.

2.6.2.9.8 Part Number: STAR2502-V2-85 Kit. 2-port faceplate with two 2-7005 voice grade connectors. White.

2.6.2.9.9 Part Number: STAR2501-D1-52 Kit. 1-port faceplate with one STAR6000C6T data connector. Electrical ivory.

2.6.2.9.10 Part Number: STAR2501-D1-85 Kit. 1-port faceplate with one STAR6000C6T data connector. White.

2.6.2.9.11 Part Number: STAR2502-D2-52 Kit. 2-port faceplate with two STAR6000C6T data connectors. Electrical ivory.

2.6.2.9.12 Part Number: STAR2502-D2-85 Kit. 2-port faceplate with two STAR6000C6T data connectors. White.

2.6.2.9.13 Part Number: STAR2502-DV-52 Kit. 2-port faceplate with one STAR6000C6T data and one 2-7005 voice grade connector. Electrical ivory.

2.6.2.9.14 Part Number: STAR2502-DV-85 Kit. 2-port faceplate with one STAR6000C6T data and one 2-7005 voice grade connector. White.

2.6.3 Surface Mount Faceplates:


2.6.3.1 Basis of Design: SpeedStar Barrel Connector 3GHz F81 as manufactured and supplied by Suttle.

2.6.3.1.1 For SpeedStar faceplates and housings.

2.6.3.1.2 Type F connector.

2.6.3.1.3 Frequency Range: 5 to 3000 MHz.

2.6.3.2 Basis of Design: SpeedStar Surface Mount Housings as manufactured and supplied by Suttle. Available in several configurations for use with Suttle's line of SpeedStar modular multimedia connectors. Snap-in connector installation with the use of versatile insert plates. Mounted with screws or double-sided adhesive pad.


2.6.3.2.1 Part Number: STAR558. 1- or 2-port surface mount housing.

2.6.3.2.2 1.)Dimensions (HxLxW): 1.17 x 2.70 x 2.50 in (30 x 69 x 64 mm).

2.6.3.2.3 Part Number: STAR107SM. Up to 3-port surface mount housing.


** NOTE TO SPECIFIER ** the two following items are not available in the light almond color.

2.6.3.2.5 Part Number: STAR108SM. Up to 6-port surface mount housing.


2.6.3.2.7 Part Number: STARMMB. Up to 12-port surface mount housing.




2.6.3.2.10 Color: Light almond.




2.6.3.3 Basis of design: Wall Mount Adaptort DSL Filter as manufactured and supplied by Suttle. Manage all connectivity in one plate. Smooth faceplate jacks visibly labeled "DATA" and "VIDEO" above each port respectively allowing user to distinguish between them.

2.6.3.3.1 Part Number: 2-5001-FC-C6. 2-port faceplate, single gang, one "Data" and one "Video" labeled port. Smooth finish.





2.6.3.3.5 Attractive one piece design.

2.6.3.3.6 Smooth, non-textured surface and rounded corners with painted head screws to match the faceplate.

2.6.3.3.7 Data jacks rated up to CAT6.

2.6.3.3.8 Connections to jacks are 110 IDC.

2.6.3.3.9 F connector 3GHz SCTE compliant.

2.6.3.3.10 Data Inputs: 8 conductor, CAT6.

2.6.3.3.11 Data Outputs: 110 IDC.

2.6.3.3.12 Video Inputs and Outputs: F81 barrel connectors.

2.6.3.3.13 1.)Standards: SCTE 02 compliant.

2.6.3.3.14 2.)Materials: Nickel plated free spinning brass.

2.6.3.3.15 3.)Frequency: 5-3000 MHz.

2.6.3.3.16 Wiring Data: TS68A.

2.6.3.3.17 Dimensions (LxW): 4.57 x 2.81 in (116 x 71 mm).

2.6.3.4 Basis of Design: Surface Mount Connector Kits as manufactured and supplied by Suttle. Combine a housing with one or two voice grade, data, voice/data or gel filled, connectors with bezels. Configurable for SpeedStar modular connectors. Attach using screws or double-sided adhesive pad. Includes snap-in 1 or 2 port insert plates for a custom installation.


2.6.3.4.1 Part Number: STAR558-G1-52 Kit. 1-port faceplate with one gel filled STAR600V6-RCB voice grade connector. Electrical ivory.

2.6.3.4.2 Part Number: STAR558-G1-85 Kit. 1-port faceplate with one gel filled STAR600V6-RCB voice grade connector. White.

2.6.3.4.3 Part Number: STAR558-G2-52 Kit. 2-port faceplate with two gel filled STAR600V6-RCB voice grade connectors. Electrical ivory

2.6.3.4.4 Part Number: STAR558-G2-85 Kit. 2-port faceplate with two gel filled STAR600V6-RCB voce grade connectors. White.

2.6.3.4.5 Part Number: STAR558-V1-52 Kit. 1-port faceplate with one 2-7005 voice grade connector. Electrical ivory.

2.6.3.4.6 Part Number: STAR558-V1-85 Kit. 1-port faceplate with one 2-7005 voice grade connector. White.

2.6.3.4.7 Part Number: STAR558-V2-52 Kit. 2-port faceplate with two 2-7005 voice grade connectors. Electrical ivory.

2.6.3.4.8 Part Number: STAR558-V2-85 Kit. 2-port faceplate with two 2-7005 voice grade connectors. White.

2.6.3.4.9 Part Number: STAR558-D1-52 Kit. 1-port faceplate with one STAR6000C6T data connector. Electrical ivory.

2.6.3.4.10 Part Number: STAR558-D1-85 Kit. 1-port faceplate with one STAR6000C6T data connector. White.

2.6.3.4.11 Part Number: STAR558-D2-52 Kit. 2-port faceplate with two STAR6000C6T data connectors. Electrical ivory.

2.6.3.4.12 Part Number: STAR558-D2-85 Kit. 2-port faceplate with two STAR6000C6T data connectors. White.

2.6.3.4.13 Part Number: STAR558-DV-52 Kit. 2-port faceplate with one STAR6000C6T data and one 2-7005 voice grade connector. Electrical ivory.

2.6.3.4.14 Part Number: STAR558-DV-85 Kit. 2-port faceplate with one STAR6000C6T data and one 2-7005 voice grade connector. White.

2.6.3.5 Basis of Design: MediaMAX Decorator Faceplates as manufactured and supplied by Suttle. Designed to match and enhance modern look designs while reducing the number of assembly components.

2.6.3.5.1 Standards Compliance: Listed to UL and ULc.

2.6.3.5.2 Simple snap-in connector installation.

2.6.3.5.3 Mount over standard J-box or low voltage bracket.

2.6.3.5.4 Compatible with all SpeedStar connectors.

2.6.3.5.5 Compatible with all SpeedStar color bezels for color coding.

2.6.3.5.6 Materials: UL 94V-O Thermoplastic

2.6.3.5.7 Dimensions: Single Gang (H W x D): 4.57 x 2.81 x 0.2 inch (116 x 71 x 5 mm)

2.6.3.5.8 Screw-On, One-Piece White Faceplates:

2.6.3.5.9 1.)Part Number: FD-11-SCR-85. 1-port MediaMAX faceplate, single gang.



2.6.3.5.12 Snap-On Two-Piece White Faceplates:

2.6.3.5.13 1.)Part Number: FD-11-SNO-85. 1-port MediaMAX faceplate, single gang.




2.7 ACCESSORlES

** NOTE TO SPECIFIER ** Delete paragraphs not required.

2.7.1 Couplers and Adapters:


2.7.1.1 Basis of Design: 2-line Split and Bridge Inline Adapter as manufactured and supplied by Suttle. Four-conductor to 2/2/4-conductor, designed for connecting two items to an existing 2-line modular jack separating each line out to the center pair on its own jack while allowing a third item access to both lines.

2.7.1.1.1 Part Number: 173.

2.7.1.1.2 Labeling: L1 / L2 / L1 and L2.

2.7.1.2 Basis of Design: Inline T Adapters - 267 Series as manufactured and supplied by Suttle. Connect two telephones or associated equipment items to an existing modular jack. Allow for quick connection of two devices at a single jack location without rewiring.


2.7.1.2.1 Part Number: 267A4. 2 for 1 inline modular adapter, 4-conductor to 4/4-conductor.

2.7.1.2.2 Part Number: 267A. 2 for 1 inline modular adapter, 4-conductor to 6/6-conductor.

2.7.1.2.3 Part Number: 267B. Inline modular adapter, single 4-contact jack wired for termination of 2 lines.

2.7.1.2.4 Part Number: 267C. Inline modular adapter, Voice labeled: PHONE, Data labeled: MODEM.

2.7.1.2.5 Part Number: 267E. 2 for 1 inline modular adapter, 6-conductor to 6/6-conductor.


2.7.1.2.7 Modifies circuitry without rewiring.

2.7.1.2.8 Allows multiple connections from a single modular jack.


2.7.1.2.10 Contact Pressure: Greater than 0.22 lbs (100 grams).

2.7.1.2.11 Insulation Resistance: Greater than 500 megaohms.

2.7.1.2.12 Contact Resistance: Less than 10 milliohms.

2.7.1.2.13 Current/Voltage: 140 VDC at 2 Amps.

2.7.1.3 Basis of Design: 4-line Split Inline Adapter as manufactured and supplied by Suttle. Eight-conductor to 4/4-conductor, splits eight conductor premise wiring into two, four-conductor modular outputs.

2.7.1.3.1 Part Number: 400E.

2.7.1.3.2 Input: RJ61.

2.7.1.3.3 Output: RJ14.

2.7.1.3.4 Labeling: PAIR 1 and 2 / PAIR 3 and 4.

2.7.1.4 Basis of Design: 2 for 1, 8-conductor Inline Adapter as manufactured and supplied by Suttle. Eight-conductor plug to 8/8-conductor jacks, designed for connecting two items to an existing modular jack.

2.7.1.4.1 Part Number: 400S-50.

2.7.1.4.2 Input: RJ61.

2.7.1.4.3 Output: RJ61.

2.7.1.5 Basis of Design: 4-line Split Coupling Adapter as manufactured and supplied by Suttle. Four-line split coupling modular adapter, 8-conductor to 4/4-conductor, designed for splitting 4-lines on an 8-position jack into 2-lines on two 6-position jacks.

2.7.1.5.1 Part Number: 450A.

2.7.1.5.2 4 voice lines.

2.7.1.5.3 Input: RJ61 jack.

2.7.1.5.4 Output: RJ14 jack.

2.7.1.5.5 Labeling: PAIR 1 and 2 / PAIR 3 and 4.

2.7.1.6 Basis of Design: Telephony Couplersas manufactured and supplied by Suttle.An in-line device for connecting and/or extending two modular plug-ended line cords. Extends modular circuits without the hassle and expense of hardwired connecting blocks.


2.7.1.6.1 Part Number: 159MC-4. 4-conductor coupler, reverse wiring, ivory housing.

2.7.1.6.2 Part Number: 159MC-6. 6-conductor coupler, reverse wiring, ivory housing.

2.7.1.6.3 Part Number: 159MC-8A. 8-conductor coupler, straight wiring, gray housing.

2.7.1.6.4 Part Number: 159MC-8B. 8-conductor coupler, reverse wiring, gray housing.


2.7.1.6.6 Reverse or straight through wiring.


2.7.1.6.8 Contacts: Spring tempered phosphor-bronze 0.018 inch (0.46 mm) diameter 50 micro-inch (0.00127 mm) hard gold plating minimum 100 micro-inch (0.00254 mm) underplate with sulfamate nickel.

2.7.1.6.9 Contact Pressure: 0.22 lbs (0.22 lbs (100 grams) minimum.

2.7.1.6.10 Insulation Resistance: 500 megaohms.

2.7.1.6.11 Contact Resistance: 10 milliohms maximum.

2.7.1.6.12 Voltage/Current: 140 VDC at 2 amps.

2.7.2 Fiber Accessories:

2.7.2.1 Basis of Design: SpeedStar SC Adapter with trap door as manufactured and supplied by Suttle. Adapter provides instant coupling of fiber connectors within a miniature housing. The integrated spring-loaded trap door automatically closes when a SC connector is not connected or is removed, shielding potentially harmful laser light. Enables the adapter to be installed into any SpeedStar faceplate or housing allowing for the product to be integrated into many different form factors and a variety of different architectures.


2.7.2.1.1 Part number: STAR500SCGR-T SpeedStar SC adapter with trap door.

2.7.2.1.2 Part number: STAR500HSC-T SpeedStar SC adapter housing with trap door only, no SC adapter.




2.7.2.1.5 Integrated trap door shields potentially harmful laser light.

2.7.2.1.6 Design allows for use in a wide variety of products for maximum flexibility.


2.7.2.1.8 Connector Type: SC / SC simplex fiber coupler.

2.7.2.1.9 Cable Retention: Greater than 15 lbs (6.8 kg).

2.7.2.1.10 Back Reflection (typical - limit): 65 dB to minus 60 dB.

2.7.2.1.11 Insertion Loss (typical - limit): 0.1 dB to 0.3 dB.

2.7.3 Inline xDSL Filters:


2.7.3.1 Basis of Design: 1-line wall mount adapter DSL filter - Ivory as manufactured and supplied by Suttle. Allows residential alarm panels to take control of the main phone line via the RJ31X or RJ38X connector. Blocks DSL service to the alarm panel while providing uninterrupted DSL service to the household telephone wiring. Designed to plug into a RJ31X jack, including other similar jacks up to RJ38X.

2.7.3.1.1 Part Number: 900A.



2.7.3.1.4 2.)Part 68 of FCC Rules and requirements adopted by the ACTA.

2.7.3.1.5 Customer installable.

2.7.3.1.6 Automated alarm dialer compatible high-speed Internet device.

2.7.3.1.7 Stop-Band Isolation: Greater than 25 dB from 25 kHz to 1.2 MHz.

2.7.3.1.8 REN: 0.2 B (AC).

2.7.3.1.9 DC Resistance: Tip to tip, ring to ring; less than 20 Ohms.

2.7.3.1.10 Loading Capacity on Port: Less than 60 nF.

2.7.3.1.11 Attenuation Distortion: Less than 0.4 dB.

2.7.3.1.12 Dimensions (LxHxD): 3.0 x 1.0 x 0.8 in (76 x 25 x 20 mm).

2.7.3.2 Basis of Design: 2-Line Inline DSL Filter as manufactured and supplied by Suttle. Connects between the wall jack and voice device (e.g. phone, fax, answering machine, Caller ID) providing a single filtered jack. Eliminate erratic impedance from telephone equipment that interferes with DSL communications.

2.7.3.2.1 Part Number: 900LCC-2F-50.



2.7.3.2.4 2.)Part 68 of FCC Rules and requirements adopted by the ACTA.

2.7.3.2.5 3.)ANSI T1. 421.


2.7.3.2.7 Two filtered lines (pins 3 and 4, 2 and 5).

2.7.3.2.8 Compatible with ADSL, ADSL2 plus, VDSL2 to 30 MHz (data only).

2.7.3.2.9 Filter Topology: 2-pole low pass.

2.7.3.2.10 Contacts (plug and jacks): Minimum 50 micro-inch (0.00127 mm) of gold and nickel.


2.7.3.2.12 Dielectric Withstand: 1000 VDC for 1 minute.

2.7.3.2.13 REN: 0.1B (ac).

2.7.3.2.14 Series DC Resistance: Less than 20 ohms (T to R with telephone port shorted).

2.7.3.2.15 Loading Capacity: 16 nF (T to R).

2.7.3.2.16 DC Loop Current: Operates from 0 to 90 mA.

2.7.3.2.17 Off-Hook Insertion Loss: Less than 0.2 dB at 1 KHz.

2.7.3.2.18 Off-Hook Insertion Loss Distortion: Less than 0.5 dB (200 Hz to 4KHz).

2.7.3.2.19 Off-Hook Impedance Distortion:

2.7.3.2.20 1.)ERL greater than 9 dB.

2.7.3.2.21 2.)SRL-LO greater than 13 dB.

2.7.3.2.22 3.)SRL-HI greater than 3 dB.

2.7.3.2.23 Envelope Delay: Less than 100 us (300 Hz to 2.8 kHz).

2.7.3.2.24 Stopband Attenuation:

2.7.3.2.25 1.)Greater than or equal to 21 dB at 25 to 50 kHz.

2.7.3.2.26 2.)Greater than or equal to 25 dB at 50 kHz to 30 MHz.


2.7.3.3 Basis of Design: Single-Line Inline DSL Filter as manufactured and supplied by Suttle. Connects between the wall jack and voice device (e.g. phone, fax, answering machine, Caller ID) providing a single filtered jack. Eliminates erratic impedance from telephone equipment that interferes with DSL communications.

2.7.3.3.1 Part Number: 900LCC-50.


2.7.3.3.3 1.)Listed Ul and ULc.

2.7.3.3.4 2.)Complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA.

2.7.3.3.5 3.)ANSI T1. 421.


2.7.3.3.7 Compatible with ADSL, ADSL2 plus, VDSL2 to 30 MHz (Data Only).

2.7.3.3.8 Filter topology: 2-pole low pass.

2.7.3.3.9 Contacts (Plug and Jacks): Minimum 50 micro-inch of gold and nickel.



2.7.3.3.12 REN: 0.1B (ac).

2.7.3.3.13 Series DC Resistance: 20 ohms max. (T to R with telephone port shorted).




2.7.3.3.17 Off-Hook Insertion Loss Distortion: Less than 0.5 dB (200 Hz to 4 KHz).







2.7.3.3.24 1.)Greater than or equal to 21 dB at 25 kHz to 50 kHz.


2.7.3.3.26 Dimensions (HxWxD): 1.24 x 3.82 x .76 in (31 x 97 x 19 mm).

2.7.3.4 Basis of Design: 2-Line Inline Adapter DSL Filter as manufactured and supplied by Suttle. Connects between the wall jack and voice device (e.g. phone, fax, answering machine, Caller ID) providing a filtered jack and an unfiltered jack. Filters eliminate erratic impedance from telephone equipment that interfere with DSL communications.

2.7.3.4.1 Part Number: 900LCCS-2F-50.



2.7.3.4.4 2.)Part 68 of the FCC Rules and the requirements adopted by the ACTA.

2.7.3.4.5 3.)ANSI T1. 421.

2.7.3.4.6 Flame retardant thermoplastic per UL-94-V0.

2.7.3.4.7 Two filtered lines through one jack (pins 3 and 4, 2 and 5) and unfiltered signal through the other jack.



2.7.3.4.10 Contacts (plug and jacks) minimum 50 micro-inch (0.00127 mm) of gold and nickel.


2.7.3.4.12 Dielectric Withstand: 1 000 VDC for 1 minute.

2.7.3.4.13 REN: 0.1B (ac).





2.7.3.4.18 Off-Hook Insertion Loss Distortion: Less than 0.5 dB (200 Hz to 4 KHz).










2.7.3.5 Basis of Design: 1-line ADSL/ADSL2 plus Filter with Unfiltered Jack as manufactured and supplied by Suttle. Plugs into a wall jack providing separate ports for filtered voice (POTS) and high-speed ADSL data signals. The filter/splitter has two jacks: one (unfiltered) for a DSL modem and another (filtered) for a voice-grade device (phone, fax, answering machine, etc.) It keeps the voice-grade devices from interfering with the performance of the DSL modem, and keeps noise from the data signal off the voice devices.

2.7.3.5.1 Part Number: 900LCCS-50.



2.7.3.5.4 2.)Complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA.

2.7.3.5.5 3.)ANSI T1. 421.


2.7.3.5.7 Compatible with ADSL and ADSL2 plus.


2.7.3.5.9 Contacts (Plug and Jacks) Minimum 50 micro-inch of gold and nickel.



2.7.3.5.12 REN: 0.1B (ac).





2.7.3.5.17 Off-Hook Insertion Loss Distortion: Less than 0.5dB (200 Hz to 4 KHz).





2.7.3.5.22 Envelope Delay: Greater than 100 us (300 Hz to 2.8 kHz).




2.7.3.5.26 Dimensions (HxWxD): 1.30 x 4.33 x .76 in (33 x 110 x 19 mm).

2.7.3.6 Basis of Design: 2-line filtered and auxiliary DSL jack as manufactured and supplied by Suttle. Connects between the wall jack and voice device (e.g. phone, fax, answering machine, Caller ID) providing both an unfiltered DSL jack for DSL connection and a filtered jack for a single line of voice device communications. Filters isolate telephone equipment impedances from ADSL, delivering high bandwidth ADSL transmission capabilities.

2.7.3.6.1 Part Number: 900LCS-2F-50E.


2.7.3.6.3 1.)FCC registered; complies with Part 68.





2.7.3.6.8 Contacts (Plug and Jacks) Minimum 50 micro-inch of gold and nickel.

2.7.3.6.9 Two filtered lines through one jack (pins 3 and 4, 2 and 5) and unfiltered signal through the other jack.

2.7.3.6.10 Small, compact design.



2.7.3.6.13 REN: 0.1B (ac).

2.7.3.6.14 Series DC Resistance: 20 ohms max. (T to R with telephone port shortened).



2.7.3.6.17 Off-hook Insertion Loss: Less than 0.2 dB at 1 KHz.

2.7.3.6.18 Off-hook Insertion Loss Distortion: Less than 0.5 dB (200 Hz to 4 KHz).


2.7.3.6.20 1.)Network Port:

2.7.3.6.21 a.)ERL: greater than 10 dB.

2.7.3.6.22 b.)SRL-LO: greater than 12 dB.

2.7.3.6.23 c.)SRL-HI: greater than 5 dB.

2.7.3.6.24 2.)Phone Port:




2.7.3.6.28 3.)Envelope Delay: Less than 100 us (300 Hz to 2.8 kHz).

2.7.3.7 Basis of Design: 1-line filtered and auxiliary DSL jack as manufactured and supplied by Suttle. Connects between the wall jack and voice device (e.g. phone, fax, answering machine, Caller ID) providing both an unfiltered DSL jack for DSL connection and a filtered jack for a single line of voice device communications. Filters isolate telephone equipment impedances from ADSL, delivering high bandwidth ADSL transmission capabilities.


2.7.3.7.1 Part Number: 900LCS-2F-50E.

2.7.3.7.2 Part Number: 900LCS-50ETX. Spanish labels (1 per pack).

2.7.3.7.3 Part Number: 04AG-003L000 Spanish labels (2 per pack).


2.7.3.7.5 1.)FCC registered; complies with Part 68.



2.7.3.7.8 Contacts: Plug and Jacks - Minimum 50 micro-inch of gold and nickel.

2.7.3.7.9 Small, compact design.



2.7.3.7.12 REN: 0.1B (ac).

2.7.3.7.13 Series DC Resistance: 20 ohms max. (T to R with telephone port shortened).



2.7.3.7.16 Off-hook Insertion Loss: Less than 0.2 dB at 1 KHz.

2.7.3.7.17 Off-hook Insertion Loss Distortion: Less than 0.5 dB (200 Hz to 4 KHz).


2.7.3.7.19 1.)Network Port:




2.7.3.7.23 2.)Phone Port:




2.7.3.7.27 3.)Envelope Delay: Less than 100 us (300 Hz to 2.8 kHz).

2.7.4 Modular Plugs:


2.7.4.1 Basis of Design: 4-position, 4-conductor Modular Plug as manufactured and supplied by Suttle. Meets FCC Part 68 requirements.

2.7.4.1.1 Part Number: 264. For handset cords.


2.7.4.2.1 Part Number: 266. For stranded wire.

2.7.4.3 Basis of Design: 6-position, 4-conductor Modular Plug for Solid Wire as manufactured and supplied by Suttle. Meets FCC Part 68 requirements.

2.7.4.3.1 Part Number: 266-4S. For solid wire only.


2.7.4.4.1 Part Number: 266-6. For stranded wire.

2.7.4.5 Basis of Design: 8-position, 8-conductor Keyed Modular Plug as manufactured and supplied by Suttle. Meets FCC Part 68 requirements.

2.7.4.5.1 Part Number: 266-8K. For stranded wire. Keyed plug.

2.7.4.6 Basis of Design: 8-position, 8-conductor Non-Keyed Modular Plug as manufactured and supplied by Suttle. Meets FCC Part 68 requirements.

2.7.4.6.1 Part Number: 266-8NK. For stranded wire. Non-Keyed plug.

2.7.5 Patch Cords:

2.7.5.1 Basis of Design: CAT6 Patch Cords as manufa

ARCAT | Free Building Product CAD Details, BIM, Specs ... · Web view1.)Greater than or equal to 21...

Documents

Transcript of ARCAT | Free Building Product CAD Details, BIM, Specs ... · Web view1.)Greater than or equal to 21...