AquaflexHybrid Adhesive Demonstration

Capo Beach, CA

March 14, 2012

VCT and LVT installed over part Terrazzo and concrete. RH >90%

Gondolas jacked out of the way and floor lifted with a Terminator

780 Diamatic, 3 head grinder (220v) with vacuum attachment over Terrazzo and concrete.

Setting Tile

Field was placed first, leaving perimeter for later. Section is set in wet adhesive in a walk-On-Work method after 20-25min

flash then rolled with 100lb roller. Perimeter tile is precut and set wet with 10-15min flash in a Walk-Off-Work (Wet Set)

method.

6 Months Later

Before After

The best part about the installation is that it occurred at night without 1 minute of disruption.

This alone saved Rite-Aid $1,000 in lost revenue and wages.

(6 months)