Aps

Air Products forImmediate shipment airprodsales.com

STOCK CATALOG

Access DoorsAccessoriesActuatorsBackdraft DampersControl DampersDiffusers/ScreensDuct Silencers

Fire/Smoke DampersLouversRegisters/GrillesSmoke DetectorsTerminal UnitsValves

323-728-0004858-583-0807

STOCK CATALOG

For over 70 years, the ability to deliver

quality products in record time has been

at the heart of Pottorff-Air Product Sales

exceptional customer service. Recognizing

the need for fast delivery, Pottorff-Air

Product Sales compliments its industry

leading service with a “Quick-Ship”

capability that is second to none.

Performance is serious business to us.

Automated processing, specialized

manufacturing systems and a fundamental

business philosophy built on exceeding

customer expectations are key to our

continued success.

Pottorff - Air Product Sales

6501 Flotilla Street

Commerce, CA 90040

Los Angeles Phone: 323-728-0004

San Diego Phone: 858-583-0807

Fax: 323-889-4825

www.airprodsales.com

Call Us at: 323-728-0004

STOCK CATALOG



323-728-0004858-583-0807

M A N U F A C T U R E R S R E P R E S E N T A T I V E S

S O U T H E R N C A L I F O R N I A S A L E S

Serving the HVAC Industry Since 1928

6501 Flotilla Street • Commerce, CA 90040 • Phone: 323-728-0004 • Fax: 323-889-4825San Diego Phone: 858-583-0807 • Fax: 760-599-1097


• Access Doors & Panels• Air Control Dampers• Air Doors• Air Distribution• Architectural Louvers & Penthouses• Architectural Screens & Grilles• Backdraft Dampers• Fans & Blowers• Roof/Smoke Hatches

• Electric Duct Heaters

• Fire & Smoke Dampers

• Gravity Ventilators

• Kitchen Exhaust Systems

• Motors, Controls & Damper Accessories

• Sound Attenuators & Enclosures

• VAV Terminal Units

• Security Grilles & Bars

REPRESENTING

PRODUCT LINES

Architectural Louvers

Architectural Louvers

A Division of PCI Industries, Inc.Sound Traps

Acoustical LouversSound Panels

A Division of PCI Industries, Inc.Louvers

A Division of PCI Industries, Inc.Louvers and Dampers

A Division of PCI Industries, Inc.Linear Slots and Security ProductsRoof Hatches and Access Doors

Fans and Blowers

Pneumatic Actuators

Access Doors

Actuators and Valves

STOCK CATALOG

Air Products forImmediate shipment














continued success.



Commerce, CA 90040



Fax: 323-889-4825


Call Us at: 323-728-0004

STOCK CATALOG



323-728-0004858-583-0807

Table of ContentsLA Order Desk: (323) 728-0004SD Order Desk: (858) 583-0807

Quick Ship Program

Dampers

Fire/Smoke DampersVertical Curtain DampersSquare to Round AdaptorsCeiling Radiation DampersMounting AnglesAir Control DampersBackdraft DampersDamper Accessories

Actuators & Accessories

U.L. ActuatorsElectric ActuatorsPneumatic ActuatorActuator AccessoriesSystem Sensors

Access Doors & Roof Hatches

Exterior Access PanelStock Drywall Access DoorsRoof Hatch

Terminal Units

Single Duct Terminal UnitsVAV Accessories

Air Distribution

Linear Slot DiffusersInsulated Diffuser PlenumPerforated Lay-In DiffusersPerforated Lay-In ScreensPerforated Surface MountModular Core DiffusersArchitectural Ceiling Diffuser Lay-InLouvered Face Ceiling DiffuserCurved Blade Ceiling Diffuser

2-3

45566789

1011121213

1415-20

21

21-2223

2424

25-27272829293030

3031313232333435

3536363737

39Back Cover

Air Distribution (cont.)

Thermally Powered VAV DiffuserRound Neck Stamped Louver Diffuser Lay-InRound Face Fixed Discharge Cone DiffuserFixed Bar Return GrilleBar Style Filter GrilleSteel Auxiliary FrameAluminum Egg-Crate GrillesLouvers, 2 inch steel

Dampers

Round Opposed Blade DamperSquare Opposed Blade DamperRound Neck Opposed Blade DamperRound Neck Adaptor Square To RoundRound to Round Pancake Adaptors

Order FormDirectory of Personnel

Quick Ship Program - pg. 2-3

QUICK SHIP PROGRAM FOR POTTORFF, ALL-LITE, DYNASONICS and AIR MANAGERS MANUFACTURED ITEMS ONLY.

2

3-Day QSP and 5-Day QSP - Quantities and Sizes

Notes: Quantities shown above are the standard maximum number of units that are available under each program for the size and model shown.The above represents general program guidelines only. Please contact the factory for special requirements.Items shown in Blue denote products or special options that are available only on the 5-Day Rush Program.For products not listed, please contact the order desk for quick ship availability.

Product Category

Fire Dampers(Static & Dynamic) Rated

Fire-Smoke Dampers

Ceiling Radiation Dampers

Air Control Dampers

Backdraft Dampers

Series

VFD-10/VFD-30

VFD-10IMVFD-10-IS/VFD-30-IS

VFD-10-TL

VFD-15R/VFD-35RVFD-15R-IS/VFD-35R-IS

FD-140/FD-340

FSD-140/FSD-140-OP

FSD-17-/FSD-170-OP

FSD-340

FSD-125RSD-140

SD-25R

CFD-15RCFD-15R-ES

CFD-15

CFD-15-ES

CFD-521/CFD-521-BTCFD-20

CFD-20-ES

CD-10RCD-10

CD-20RCD-25-RCD-40

CD-50MD-30

BD-20RBD-50BD-60

10

15155

101010

10-single sect.

10-single sect.

10-single sect.

510-single sect.

10

201020

20

101515

4020-

2015-single sect.

5-single sect.-

1520

10-single sect.

25

505015

252520

20

25

20

1520

20

502550

50

253030

10040205020

1015

406020

16 & 20 ga. A, B, or C Sleeves, Round Duct Connections,Stainless Steel, Retaining Angles

20 ga. A or B Sleeves, Round Duct Connections20 ga. A or B Sleeves, Round Duct Conn. Ret. Angles 16 & 20 ga. A or B Sleeves, Round Duct Connections,Retaining Angles16 & 20 ga. Sleeves20 ga. Sleeves20 ga. Sleeves, Round Duct Connections, Stock Actuators

20 ga. Sleeves, Round Duct Connections, Stock Actuators,PI-50, Duct Mounted Smoke Detector20 ga. Sleeves, Round Duct Connections, Stock Actuators,PI-50, Duct Mounted Smoke DetectorsRound Duct Connections, Stock Actuators, PI-50Duct Mounted Smoke DetectorsStock ActuatorsRound Duct Connections, Stock Actuators, PI-50Duct Mounted Smoke DetectorsStock Actuators

22 ga. Sleeves, VC-165, CRB-24VC-165, CRB-2422 ga. Sleeves, VC-165, CRB-24, Round Duct Connections,Flange or PG ConnectionVC-165, CRB-24, Round Duct Connections,Flange or PG Connection

22 ga. Sleeves, CRB-24, Round Duct ConnectionsCRB-24, Round Duct Connections, Flange or PG Conn.

Standoff Locking Quadrants, Stainless Steel22 ga. Sleeves, Standoff Locking Quadrants, Stainless Steel Low Leakage Seals, Stock Actuators, Stainless SteelStock Actuators, Stainless SteelLow Leakage Seals, Stock Actuators, 20 ga. Sleeves,Stainless SteelStock Actuators, 20 ga. SleevesStock Actuators, Stainless Steel

22 ga. Sleeves, Stainless SteelB or C Mounting Flange, 22 ga. SleevesB or C Mounting Flange, 20 ga. Sleeves, Stainless Steel

Maximum Quantity (per Model)

3-Day QSP 5-Day QSPAvailable Options & Accessories

LA Order Desk: (323) 728-0004SD Order Desk: (858) 583-0807

QUICK SHIP PROGRAMLA Order Desk: (323) 728-0004SD Order Desk: (858) 583-0807

Program Details, Schedules and Deliveries(QSP - Rush - Standard Orders)

Pottorff Air Product Sales offers three categories of order schedules that are specifically designed to meet the dynamic requirements of your customers. While orders may be placed by U.S. mail, courier mail, fax or e-mail, Pottorff Air Product Sales requests that you refrain from placing orders, especially Standard Orders, over the telephone. Please note that the inherent risk of misunderstandingverbal orders is assumed by the Buyer. Pottorff Air Product Sales takes great pride in meeting it’s scheduled ship dates. However, in the rare case that Pottorff Air Product Sales misses a RUSH or QSP ship date, Pottorff Air Product Sales will not invoice the extra RUSH or QSP charge.

24-Hour QSP - Call us for availability and pricing.

Rush Orders must be identified as “24-Hour QSP - add 35% - or $35.00 whichever is greater.

3-Day QSP - 20% extra cost - or $20 whichever is greater.3-Day QSP Orders are small to medium sized orders of specific products that can be shipped in three days from receipt of order because of their simplicity. Specific model and size information is provided in the “Quick-Ship Program.”

Orders received Before Noon PST are scheduled to ship in three working days; orders received After Noon PST are scheduled to ship in four working days. As an example, if a 3-day QSP Order is received before noon on Thursday (the 12th), then the order would be scheduled to ship on Monday (the 16th). 3-Day QSP Orders must be identified as “3-Day QSP - add 20%.”

5-Day RUSH - 15% extra cost - or - $15 whichever is greater.The 5-Day RUSH Program is designed for time critical orders and includes the majority of our product offering. Products available on aRUSH basis are listed in our “Quick-Ship Program”. There are limited finishing capabilities on RUSH orders and non-stock actuators are typically not available.

Orders received Before Noon PST are scheduled to ship in five working days; orders received AFTER NOON PST are scheduled to ship in six working days. As an example, if a 5-Day RUSH Order is received before noon on Thursday (the 12th), then the order would be scheduled to ship the following Wednesday (the 18th.) Rush orders must be identified as “5-day RUSH - add 15%.”

7-Day RUSH - 10% extra cost - or $10 whichever is greater.The 7-Day RUSH Program is designed for time critical orders and includes the majority of our product offering. Products available on aRUSH basis are listed in our “Quick-Ship Program”. There are limited finishing capabilities on RUSH orders and non-stock actuators are typically not available.

Orders received Before Noon PST are scheduled to ship in seven working days; orders received AFTER NOON PST are scheduled toship in eight working days. As an example, if a 7-Day RUSH Order is received before noon on Thursday (the 12th), then the order would be scheduled to ship the following Friday (the 19th.) Rush orders must be identified as “7-day RUSH - add 10%.”

Standard OrdersStandard Orders are scheduled for the earliest available production completion date. The schedule is our best estimate, not a guarantee, of when orders will ship and our ability to maintain schedules is typically quite good. Production lead times are approximately two to three weeks from receipt of order. Add two to three weeks to standard lead times for products requiring painted or anodized finish. Consult factory for lead-time on non-stock actuators.

Sales Order Number (SON)Upon receipt, each customer purchase order is assigned a sales order number (SON) and a scheduled shipment date. The SON allows us to track all orders and provide rapid information regarding production status, shipping information and billing details.

3

FIRE/SMOKE DAMPERS


One Product - Multiple Applications• Vertical walls.• U.L. 555-S class II leakage rated.• 16" inch long, 20 gauge galvanized sleeve.• 1-1/2" hour rating for 1 or 2 hour walls & corridor ceilings.• U.L. file #R11767.• C.S.F.M file #3225-0368:110 fire rated, 3230-0368:111 leakage rated.• Optional SSPF single sided retaining angle.• All units available with optional round collars shipped loose.• Belimo low amperage, 120V electric (24V available), 7 Watts holding, 11 Watts running

(non stall type) actuator standard.• See optional available accessories.

• 1 hour rating for tunnel type corridor construction.• U.L. 555-S class II leakage rated.• 16" inch long, 20 gauge galvanized sleeve.• U.L. file #R11767.• C.S.F.M. file #3225-0368:110 fire rating, 3230-0368:111 leakage rating.• Optional SSPF single sided retaining angle or loose flange

(for use with air distribution).• Optional AR unit with collars both ends - optional AR1 unit with top collar only.

Collar(s) provided loose.• Belimo low amperage, 120V electric (24V available), 7 Watts holding, 11 Watts running.

(non stall type) actuator standard.• Additional accessories also available (see accessory reference).

FSD-172 - WallApplication

Horizontal Mount

Mounting Angles

FSD-172 - CorridorCeiling Application

Smoke Detector - pg. 13

Actuators - pg. 10-11

Access Doors - pg. 14-20

SSPF Angles - pg. 6


The Model FSD-172 is cross listed for installation in one and two hour rated walls for vertical mounting. It is also listed for installations in one hour rated tunnel corridor ceilings.

SSPF Mounting AnglesPottorff Air Product Sales’sexclusive single-side mountingangle design only requiresangles on one side of partition.The ingenious corner designallows this mounting system toinstall either underneath or ontop of the drywall offering addi-tional installation options andcost savings. Tested andapproved in accordance withU.L. standard 555 this uniquesystem is in full compliancewith all building codes for woodstud, metal stud or masonryinstallations.

Accessory Reference Operator/Actuator

AirFlow

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"20"x20"22"x22"24"x24"

W-11694W-11695W-11696W-11697W-11698W-11699W-11700W-11701W-11702W-11703

$538.00$538.00$575.00$575.00$649.00$649.00$688.00$688.00$732.00$732.00

Size Stock# List Price

4

Single Mounting AngleOver Drywall

Single Mounting AngleUNDER Drywall

* Metal Stud Only

MetalStud

MetalStud Damper

SleeveDamper Sleeve

VERTICAL FIRE DAMPERS

• “A” style dynamic dampers stocked.• Wall style vertical mount for

1 or 2 hour walls.• 12", 20 gauge galvanized steel sleeve.• U.L. file #R11767.• C.S.F.M. file #3225-368:101.• Optional SSPF picture frame angles.• Optional AR or AR1 units come with

round collar(s) loose.VFD-10-D-ISVertical Mount

(Model - VFD-10D-ISAR shown above.Optional round duct connection is a U.L.

approved breakaway connection.)

Accessory Reference

6" x 6"8" x 8"

10" x 10"12" x 12"14" x 14"16" x 16"18" x 18"20" x 20"22" x 22"24" x 24"

W-11617W-11618W-11619W-11620W-11621W-11622W-11623W-11624W-11625W-11626

$61.00$61.00$67.00$67.00$82.00$82.00$104.00$104.00$131.00$131.00


Access Doors - pg. 14-20Warnock Hersey Angle Set - pg.6

6"x6"x6"8"x8"x6"8"x8"x8"

10"x10"x8"10"x10"x10"12"x12"x10"12"x12"x12"14"x14"x12"14"x14"x14"16"x16"x14"16"x16"x16"18"x18"x16"18"x18"x18"20"x20"x18"20"x20"x20"22"x22"x20"22"x22"x22"24"x24"x22"24"x24"x24"

W-11637W-11638W-11639W-11640W-11641W-11642W-11643W-11644W-11645W-11646W-11647W-11648W-11649W-11650W-11651W-11652W-11653W-11654W-11655

$9.00$11.00$11.00$13.00$13.00$14.00$14.00$15.00$15.00$16.00$16.00$17.00$17.00$18.00$18.00$20.00$20.00$27.00$27.00

Size Stock# List PriceFIRE/SMOKE DAMPERS AND FIRE DAMPERSSQUARE-TO-ROUND ADAPTORS

• The Fire/Smoke Dampers and Fire Dampers Square-to-Round Caps will not fit on the Ceiling Radiation Dampers.

SSPF Angle - pg. 6

5

Mounting AnglesSingle Mounting Angle

Over Drywall

Single Mounting AngleUNDER Drywall

* Metal Stud Only

MetalStud

MetalStud Damper

SleeveDamper Sleeve

4-3/8" (111) Std.

3-1/4" (83) Std.

• Ceiling radiation damper• For use in floor-ceiling and

roof-ceiling assemblies.• 22 gauge galvanized steel construction.• U.L. file no. 3225-368:104.• Stocked with extended sleeve.• CRB-24 24" x 24" radiation

blankets for use in T-bar ceiling.• CRB-125 is 24" x 125’ of radiation

blanket material for custom sizing.

Ceiling radiation dampers are for use in floor-ceiling and roof-ceiling assemblies. They are constructed of 22 gauge galvanized steel andare stocked with an extended sleeve.

CFD-15-ES

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"20"x20"22"x22"24"x24"CRB-24

CRB-125

W-11742W-11743W-11744W-11745W-11746W-11747W-11748W-11749W-11750W-11751W-11731W-11732

$49.00$56.00$70.00$81.00$95.00

$102.00$105.00$126.00$133.00$144.00$26.00

$667.00


CEILING RADIATION DAMPERS


WARNOCK HERSEY MOUNTING ANGLES, FOR CFD’S ONLY

W-12446 2-1"x1/2"x28" Long x 20 ga. 2-1"x1/2"x3" Long x 20 ga.

$15.00

Cat# Size List Price

SSPF MOUNTING ANGLES - For VFD’s and FSD’s Only.

W-11786W-11787W-11788W-11789W-11790W-11791W-11792W-11793W-11794W-11795

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"20"x20"22"x22"24"x24"

$6.00$8.00

$10.00$12.00$14.00$15.00$17.00$19.00$21.00$23.00

Cat# Size List Price

6

Optional round duct transition on top Quick Ship Program - pg. 2-3

CONTROL DAMPERS• Single and opposed blade action available.• 6" x 16 gauge galvanized steel blades.• 1/2" dia. hex plated steel blade shafts.• In-jamb linkage.• Standard nylon bushings.• 1/2" round x 6" drive axle with bearing.• Dampers supplied 1/4" undersized.• Optional electric and pneumatic actuators

in stock (see accessory reference.)• Optional manual locking quadrant

(see accessory reference.)

• 6" x 22 gauge sleeve and frame, doublebeaded for strength.

• Easy duct connection.• 22 gauge galvanized blade with center “V”.• 3/8" square zinc plated shafts with tight

sealing nylon bushings.• Manual locking quadrant standard with

1-1/2" stand-off bracket.• No rattles.

• 12" x 20” gauge galvanized steel sleeve.• Double beaded for strength and easy duct connection.• Double membrane steel blade (14 ga. equivalent).• Polyethylene blade gasket provides full diameter seal.• 1/2" round diameter steel blade shafts.• Leakage less than 1% at 2" of static pressure.• Maintains seal at 4" of static pressure.• Optional electric and pneumatic actuators in stock.• Optional manual locking quadrant

(see accessory reference.)

6" x 6"8" x 8"

10" x 10"12" x 12"14" x 14"16" x 16"18" x 18"20" x 20"22" x 22"24" x 24"

W-11917W-11918W-11919W-11920W-11921W-11922W-11923W-11924W-11925W-11926

$81.00$81.00$95.00$95.00$123.00$123.00$155.00$155.00$192.00$192.00


6"8"10"12"14"16"18"20"22"24”

W-11889W-11890W-11891W-11892W-11893W-11894W-11895W-11896W-11897W-11898

$109.00$115.00$125.00$135.00$147.00$158.00$170.00$188.00$214.00$234.00


6"7"8"9"10"12"14"16"18"20"22"24"

$60.00$64.00$64.00$70.00$70.00$76.00$87.00$93.00$108.00$121.00$135.00$151.00


CD-42

Damper Accessories - pg. 9 Actuators - pg. 10-11

Accessory Reference

CD-10R

CD-25R

RCS-10R

RCS-10R FieldMounting Kit

6"7"8"9"10"12"14"16"18"20"22"24"

Field Mt. KitExtra Cable

Ex. Insulation

W-12380W-12381W-12382W-12383W-12384W-12385W-12386W-12387W-12388W-12389W-12390W-12391W-12395W-12377W-12378

$162.00$162.00$166.00$166.00$172.00$178.00$190.00$196.00$212.00$224.00$237.00$253.00$142.00$3.00/FT*



• Remote controlled cable operated balancing damper.• 6" x 22 gauge galvanized steel frame and sleeve.• Double beaded for strength.• 3/8" square zinc plated steel blade shafts with tight

sealing nylon bushings.• Factory assembled (no field assembly required.)

• Includes 36" cable and remote operator (as shown below)(longer lengths available.)

• Control arm/screw assembly - mounted on standoff bracket.

• Standard 36" long cable included (optional cable lengths available.)

• Allen key remote control assembly can be provided loose for use with almost any balancing damper.

• Standard 15/16" O.D. provides unobtrusive opening inceiling or wall for architectural requirements.

* Included with W-12377

7

W-11879W-12392W-11880W-12393W-11881W-11882W-11883W-11884W-11885W-11886W-11887W-11888

BACKDRAFT DAMPERS

• Aluminum tie bar interconnects all blades for increased stability at higher velocities up to 1250 fpm.

• Blade edge open cell neoprene gaskets reduce leakage and noise.

• Units supplied approximately 1/4" under nominal duct dimension.

The BD-50 is constructed with 2" X 1/2" X .060extruded aluminum channel frame and 24 gaugeformed aluminum blades. They feature nylonbushings and blade axles. They are constructedfor vertical mounting and horizontal upflow.

• Neoprene closed cell gaskets around frame.• Designed for low air flow gravity and fan usage

less than 600 FPM.

The BDR is constructed with 20 gauge steel frame andsleeve with aluminum spring loaded blades. They areconstructed for vertical mounting and horizontal upflow.

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"20"x20"22"x22"24"x24"

W-11899W-11900W-11901W-11902W-11903W-11904W-11905W-11906W-11907W-11908

$43.00$43.00$57.00$57.00$78.00$78.00$120.00$120.00$148.00$148.00


4"6"7"8"10"12"14"16"

W-11909W-11911W-11912W-11913W-11914W-11915W-11916W-12281

$42.00$49.00$74.00$87.00$120.00$162.00$191.00$229.00


BD-50

JDAA has a steel box type framewith aluminum blades with felt edging. They are constructed forvertical or horizontal upflow.

• 1500 FPM max. velocity at 1" w.g. with interconnecting tie bars.

• Adjustable tension spring provided.• 7/8" dia. conduit knockout in frame.

JDAA

10"x10"12"x12"15"x15"16"x16"19"x19"22"x22"26"x26"34"x34"

W-11236W-11237W-11238W-11239W-11240W-11241W-11242W-11243

$51.00$55.00$71.00$71.00$83.00$96.00$126.00$168.00



BDR

2" (51)Std.

5-5/8"(143)Max.

2" (51)Std.

5-5/8"(143)Max.

Vertical Mount

Horizontal Mount

2" (51)Std.

5-5/8"(143)Max.

2" (51)Std.

5-5/8"(143)Max.

Vertical Mount

Horizontal Mount

8

Air Flow

6-3/8"

DAMPER ACCESSORIES

A Style, 165 DegreeA Style, 212 DegreeB Style, 165 DegreeB Style, 212 DegreeE Style, 165 DegreeE Style, 212 DegreeStarlink, 165 Degree

Fusible Link Hook

W-12099W-12100W-12103W-12104W-12420W-12421W-12422W-12445

$7.00$7.00$7.00$7.00$12.00$12.00$29.00$8.00


U.L. DAMPER ACCESSORIES

A Style

B Style

E Style for FD

RCP-1 Toggle RCP-1 Key RDT-Remote Damper Tester

W-10087W-10088W-10089

$140.00$176.00$375.00


Fire Damper,Single LabelFire Damper,

500 Piece RollFire/Smoke,Single LabelFire/Smoke,

500 Piece Roll

W-12423

W-12424

W-12425

W-12426

$2.00

$138.00

$2.00

$138.00


DAMPER HARDWARE

5/16" Connecting Rod


FUSIBLE SWITCHES TESTER

FSD LABELS

FD LABELS

DAMPER DRIVE

HIGH BLADEBRACKET

LOW BLADEBRACKET

BALL JOINTSWIVEL

BUSHING/BEARINGS


BLADE EDGE SEAL


MANUAL QUADRANTS

S.S. Steel Oilite Bearing,1/2" Round

Synthetic Bearing,1/2" Round

Ball Bearing,1/2" Round

Synthetic Bearing,3/8" Square

W-12438

W-12439

W-12440

W-12441

$10.00

$5.00

$8.00

$5.00

Blade Edge Seal,Bulb, per foot

Blade Edge Seal,Closed Cell, per foot

Blade Edge Seal, Open Cell, per foot

W-12442

W-12443

W-12444

$10.00

$10.00

$10.00

LQ-355, 3/8" SquareSQ-315, 3/8" Square with

1" Stand-OffSQ-325, 3/8" Square with

2" Stand-OffLQ-560, 1/2" RoundLQ-555, 1/2" SquareHQ-760, 3/4" Round

W-10092W-10093

W-10094

W-10095W-10096W-10097

$9.00$13.00

$13.00

$20.00$20.00$30.00

Size Stock# List Price1/2" RD. Damper Drive Arms

High Blade BracketsLow Blade BracketsBall Joint Swivels

1/2" Damper Drive w/ U-clip, 6"5/16" Brass Trunion

5/16" Steel Rod, Zinc,per foot1/2" Steel Rod, Zinc, per foot3/4" Steel Rod, Hollow, Zinc,

per footDamper Blade Jumper Strap

Knee Lock for FSD w/fusible linkKnee Lock for FSD

w/electronic link

W-12428W-12429W-12430W-12432W-12447W-12431W-12427W-12434W-12437

W-12433W-12435W-12436

$10.00$20.00$15.00$10.00$20.00$7.50$10.00$15.00$20.00

$20.00$35.00$35.00

9


ACTUATORS

U.L. FIRE/SMOKE DAMPER ELECTRIC ACTUATORS - 350° DEGREE RATING

FSNF-120

BELIMO

Catalog# Model# Max.Sq.Ft. Voltage Power Description List$W-11986W-12025W-11991W-11993W-11992W-11987W-12031W-12026

FSLF-120FSLF-120-SFSNF-120

FSNF-120-SFSNF-24

FSNF-24-SFSLF-24

FSLF-24-S

66

16.516.516.516.5

66

120 VAC120 VAC120 VAC120 VAC24 VAC24 VAC24 VAC24 VAC

11(R), 7(H)11(R), 7(H)18(R), 6(H)18(R), 6(H)18(R), 6(H)18(R), 6(H)3(R), 2(H)3(R), 2(H)

2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return

$366.00$433.00$455.00$532.00$399.00$477.00$333.00$399.00

U.L. FIRE/SMOKE DAMPER PNEUMATIC ACTUATORS - 350° DEGREE RATING

SIEMENS SIEMENS

331-4826 331-2998

Catalog# Model# Max.Sq.Ft. Pressure Power Description List$W-10547

W-10548

331-4826

331-2998

4

12

8 - 13 PSI

8 -13 PSI

Pneumatic

Pneumatic

The No. 3 Pneumatic DamperActuator is a Compact,

Modular, Totally Enclosed,Rolling Diaphragm-TypeActuator Designed for

Modulating or Two PositionActuation.

The No. 3 Pneumatic DamperActuator is a Compact,

Modular, Totally Enclosed,Rolling Diaphragm-TypeActuator Designed for

Modulating or Two PositionActuation.

$211.00

$335.00

Aux. SwitchNoYesNoYesNoYesNoYes

Aux. SwitchNo

No

10

The type FSNF and FSLF spring-return actuators are intended for the operation of smoke and com-bination fire and smoke dampers in ventilation and air-conditioning systems. The actuator will meetrequirements of UL555 and UL555S when tested as an assembly with the damper and will meetrequirements of UBC for 15 second opening and closing at 3500F.

Square footage of damper operated will depend on make and model and the temperature required.

The 331-4826 Pneumatic Damper Actuator is a compact, modular,totally enclosed, rolling diaphragm-type actuator designed for mod-ulating or two position actuation. Typical applications are for controland fire/smoke leakage rated dampers or air valves.

The 331-2998 Pneumatic Actuator Damper Actuator is a totallyenclosed, pneumatic piston type actuator designed to operatedampers for ventilating systems, mixing box control, and otherapplications requiring a large effective diaphragm area and long stroke.

ACTUATORS

ELECTRIC ACTUATORS - 2 POSITION SPRING RETURN - FOR USE WITH AIR CONTROL DAMPERS

BELIMO

LF

NF/AF

Catalog# Model# Max.Sq.Ft. Voltage Power Description List$W-10554W-12002W-10555W-12005W-10550W-12000W-10551W-12003W-10552W-12001W-10553W-12004W-12449W-12451W-12450W-12452

AF-120-USAF-120-S-US

AF-24-USAF-24-S-USLF-120-US

LF-120-S-USLF-24-US

LF-24-S-USNF-120-US

NF-120-S-USNF-24-US

NF-24-S-USTF-120-US

TF-120-S-USTF-24-US

TF-24-S-US

80/40 (w/seals)80/40 (w/seals)80/40 (w/seals)80/40 (w/seals)20/10 (w/seals)20/10 (w/seals)20/10 (w/seals)20/10 (w/seals)40/20 (w/seals)40/20 (w/seals)40/20 (w/seals)40/20 (w/seals)10/5 (w/seals)10/5 (w/seals)10/5 (w/seals)10/5 (w/seals)

1201202424120120242412012024241201202424

6(R), 2.3(H)6(R), 2.3(H)5(R), 1.5(H)5(R), 1.5(H)

5.5 (R), 3.5(H)5.5(R), 3.5(H)5(R), 2.5(H)5(R), 2.5(H)6(R), 3.5(H)6(R) 3.5(H)5(R), 2.6(H)5(R), 2.6(H)2(R), 1.3(H)2(R), 1.3(H)2(R), 1.3(H)2(R), 1.3(H)

2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return2-Position, Spring Return

$505.00$594.00$449.00$554.00$344.00$400.00$312.00$367.00$378.00$461.00$333.00$417.00$300.00$355.00$255.00$312.00

ELECTRIC ACTUATORS - PROPORTIONAL SPRING RETURN

NF/AF

Catalog# Model# Max.Sq.Ft. Voltage Power Description List$W-12454

W-10557

W-12453

W-10556

AF-24-MFT-US

AF-24-MFT-S-US

NF24-SR-US

NF-24-SR-S-US

80/40 (w/seals)

80/40 (w/seals)

40/20 (w/seals)

40/20 (w/seals)

24 vac (2-10vdc)

24vac (2-10vdc)

24vac (2-10vdc)

24vac (2-10vdc)

6(R), 1.8(H)

6(R), 1.8(H)

3(R),1(H)

3(R),1(H)

Proportional SpringReturn

Proportional Spring Return

Proportional Spring Return

Proportional SpringReturn

$622.00

$710.00

$449.00

$533.00

ELECTRIC ACTUATORS-PROPORTIONAL NON SPRING RETURN2-10 VDC OR 4-20 mA CONTROL SIGNAL

LM

AM

Catalog# Model# Max.Sq.Ft. Voltage Power Description List$W-10560

W-12459W-12460W-10561W-12461W-10558W-12462W-12463

W-12464W-12465

AMX24-MFT

AMB24-SRAMB24-3

GMB24-SRGMB24-3

LMB24-SRLMB24-3

LMX24-MFT

NMB24-3NMB24-SR

40/30 (w/seals)

40/30 (w/seals)40/30 (w/seals)70/50 (w/seals)70/50 (w/seals)15/6 (w/seals)15/6 (w/seals)15/6 (w/seals)

50/25 (w/seals)50/25 (w/seals)

24vac(2-10vdc)

24vac(2-10vdc)24vac

24vac(2-10vdc)24vac

24vac(2-10vdc)24vac

24vac(2-10vdc)

24vac24vac(2-10vdc)

4(R), 1.25(H)

4(R), 1.25(H)4(R), 1.25(H)4.5(R), 2(H)4.5(R), 2(H)

1.5(R), 0.5(H)1.5(R), 0.5(H)1.5(R), 0.5(H)

2.5(R), 0.5(H)2.5(R), 0.5(H)

Proportional,Programming Available

ProportionalModulating, Floating Point



Proportional,Programming Available

Modulating, Floating PointProportional

$482.00

$464.00$322.00$608.00$453.00$285.00$181.00$356.00

$227.00$322.00

Aux. SwitchNoYesNoYesNoYesNoYesNoYesNoYesNoYesNoYes

Aux. SwitchNo

Yes

No

Yes

Aux. SwitchNo

Add-OnAdd-OnAdd-OnAdd-OnAdd-OnAdd-On

No

Add-OnAdd-On

11

For position control, fail-safe control of dampers in HVAC systems. Control is positional from an auxiliary contact, or a manual switch.These actuators provide true spring return operation for reliable application and positive close off on airtight dampers. The springreturn system provides constant torque to the damper with, and without, power applied to the actuator.


Catalog# Model# Description List$

W-12466

W-12467

W-12468

W-12469

W-12470

W-12471

PS-100

S1A

S2A

ZG-R01

ZS-T

ZS-150

Actuator PowerSupply

Simulator

Auxillary Switch,1x SPDT, 3A@ 250VAC

Auxillary Switch,2x SPDT, 3A@ 250VAC

4-20maAdaptor, 500ohms, 1/2wresistor w/6"Pigtail Wires

Terminal Coverfor NEMA-2 (T-

Models)

PolycarbonateWeather Shield

$1,084.00

$76.00

$114.00

$15.00

$17.00

$120.00

ELECTRIC ACTUATORS - ACCESSORIES

PNEUMATIC ACTUATORS - PROPORTIONAL OR 2 POSITION

KREUTER

MCP-3631

SIEMENS

331-4826

Catalog# Model# Spring Range Description List$W-10562W-10547W-10548

MCP-3631-3000331-4826331-2998

5-10 PSI8-13 PSI8-13 PSI

Pneumatic, Proportional or 2 PositionPneumatic, Proportional or 2 PositionPneumatic, Proportional or 2 Position

$175.00$211.00$335.00

12

The 331-4826 Pneumatic Damper Actuator is a compact, modular,totally enclosed, rolling diaphragm-type actuator designed for mod-ulating or two position actuation. Typical applications are for controland fire/smoke leakage rated dampers or air valves.

• Fixed or pivot mounting models.• Position relay available as an option.• Variety of mounting/linkage kits to fit any application.• Threaded shaft for easy mounting of accessory items.

S1A

PS100

ZS-T

ZS-150 S2A

SYSTEM SENSORS

SYSTEM SENSOR DH100ACDCLP LOW FLOW SMOKE DETECTOR

• Outside mounting tabs.• Patented telescoping sampling tube.• Built-in reset button.• Interconnectability for multi-fan

shutdown (up to ten air handlers).• Patented cover tamper trouble signal.• Easy to clean.• 24 VAC/DC or 120/240 VAC operation.• High-Low voltage barrier.• UL 268A listed.

• Remote test station option.• Air velocity rating from 100 to 4000

FPM.• Equipped with two DPDT form C relay

contacts.• Easy & quick mounting to round or

rectangular duct from 1’ - 12’ wide.• Textured cover for convenient visual

inspection.• 3 year warranty

DH100ACDCLP

• Low profile smoke detector design.• Low standby current.• Two LED’s “blink” in stand by.• Detector head plugs easily into base.• Built-in test switch.• Built-in tamper-resistant feature.

• Air velocity rating 0 to 3000 FPM.• 120VAC base with built-in shorting spring.• Designed for mounting on standard

electrical box.• SEM screws for easy wiring and positive

wire retention.• Removable cover and insect screen for

field cleaning.• UL 268A listed.

2151

SYSTEM SENSOR 2151 LOW VELOCITY PHOTOELECTRIC (NO FLOW/LOW FLOW) DUCT DETECTOR

SMOKE DETECTOR BASE UNIT

SAMPLING TUBE FOR ABOVE DETECTOR

B114LP• UL 2075• 12/24 VDC• Wall or ceiling mounted.• Code required trouble relay.• Electro Chemical sensing.

Accessory ReferenceRTS451 RemoteTest StationRequired to be used with

2151 detector for in-ductinstallations. Also workswith DH100ACDCLP

* For use with 2151 must order base w-12653

RTC100Remote Test CoilKit (includesRTS451)

Catalog# Model# Description List$W-12472W-12473W-12474W-12457

ST-1.5ST-3ST-5ST-10

1.5 Foot Sampling Tube3 Foot Sampling Tube5 Foot Sampling Tube10 Foot Sampling Tube

$11.00$15.00$19.00$39.00

Catalog# List$W-10563 $214.00



• 120 VAC base unit foruse with 2151 above.

B114LPOS• 120 VAC base unit foruse with 2151 above andRTS below.B1146PBT

• 24 VAC/DC base unit for use with 2151 above.

Catalog# List$W-10565W-12652W-12653

B114LPB1146PBTB114LPOS

$84.00$84.00$84.00



13

SYSTEM SENSOR CARBON MONOXIDEDETECTOR

CO1224

Model#


XPA

SPECIFICATIONS: MODEL XPA• Door: 2" Thick Insulated .040 Aluminum Door.• Flange: 1" - 16 Ga. Galvanized Steel.• Exterior Hinge: Stainless Steel.• Gasketing: EPDM Foam Rubber Bulb Seal.• Handles: Locking and Non-Locking, Zinc Die Cast with Chrome Plating.• Handles are factory installed. Panels Are Ready For Installation.• Finish: Powder Coat Gray Primer.

Catalog# Size Wall Opening No. Handles List $W-12479W-12480W-12481W-12482W-12483W-12484W-12485W-12486

12"x12"14"x14"18"x18"24"x24"24"x36"24"x48"30"x30"36"x48"

12-3/8"x12-3/8"14-3/8"x14-3/8"18-3/8"x18-3/8"24-3/8"x24-3/8"24-3/8"x36-3/8"24-3/8"x48-3/8"30-3/8"x30-3/8"36-3/8"x48-3/8"

11122222

$284.00$303.00$370.00$549.00$631.00$755.00$631.00$919.00

*For key lock on above doors add $25.00 list.

14

EXTERIOR ACCESS PANEL: MODEL XPA

Stainless Steel isalso available - Call for Pricing

16 Gauge GalvanizedSteel Frame

STOCK DRYWALL ACCESS DOORS

TM - GENERAL PURPOSE INTERIOR ACCESS DOOR

• For Masonry, tile, and wallboard.• 16 gauge door, 16 ga. frame.• Screwdriver operated cam locks.• Steel construction.• Phosphate dipped with gray prime coat.• Concealed hinge on long dimension.• Cut opening 3/8" larger than nominal.*• Custom sizes and colors also available - Just Ask Us!!!• Can be ordered with Keylock option.

* Add $25.00 list to above doors for key option.

TM

Catalog# Size List$W-11493W-11495W-11496W-11500W-11501W-11503W-11506W-11507

8" X 8"10" X 10"12" X 12"14" X 14"16" X 16"18" X 18"24" X 24"24" X 36"

$42.00$51.00$53.00$58.00$65.00$70.00$107.00$142.00

FD - FIRE RATED ACCESS DOOR

• 1 or 3 Hour U.L. “B” Label wall rating.• Warnock Hersey 1 or 3 hour floor/ceiling rating.• 2" thick, 20 gauge door, 16 gauge frame.• Self closing, spring-assisted.• Stocked with flush key hole. Recessed Universal latch for

turning and key lock included.• Concealed hinge on long dimension.• Phosphate dipped with gray prime coat.• Cut opening 3/8" larger for walls.• Frame opening 1-5/8" larger for ceilings and line opening

with 5/8" “X” gypsum board.• Please also see FDSS stainless steel and FDWB for tape

and mud applications.• Custom sizes and colors also available - Just Ask Us!!!

Catalog# Size List$W-11455W-11456W-11457W-11458W-11459W-11460W-11461W-11462W-11463W-11464W-11465W-11466W-11467W-11468W-11469

8" X 8"10" X 10"12" X 12"14" X 14"16" X 16"18" X 18"20" X 30"22" X 30"24" X 24"24" X 36"24" X 48"30" X 30"32" X 32"36” X 36”36" X 48"

$139.00$150.00$157.00$168.00$180.00$198.00$303.00$310.00$262.00$396.00$478.00$363.00$411.00$475.00$598.00

FD

15

1"1"

1-3/4" (44.5)

(25.4) (25.4)

Opening (W)

Door (W)

Ceiling Opening (W)

Door (W)

Typical Ceiling Installation

W

Wall Opening (W)

Typical Wall Installation

Check on Availability.




ACCESS DOORS AND MORE ACCESS DOORS

TMS


8"X8"10"X10"12"X12"14"X14"16"X16"18"X18"24"X24"24"X36"

$91.00$123.00$140.00$169.00$202.00$251.00$381.00$560.00

• TMS stainless steel doors are mill finish.


8"X8"10"X10"12"X12"14"X14"16"X16"18"X18"24"X24"24"X36"

$262.00$266.00$363.00$396.00$452.00$504.00$725.00$1046.00

FDSS STAINLESS STEEL OR FDWB WALL BOARD FIRE RATED ACCESS DOORS

FDWB

Catalog# Size List$W-12503W-12504W-12505W-12506W-12507W-12508

8"X8"10"X10"12"X12"14"X14"18"X18"24"X24"

$161.00$176.00$187.00$217.00$251.00$366.00

• For construction and installation information on the above access doors please contact customer service.

Custom sizes and colors available.

Just Ask Us !!!

We also handle the following relateditems for your project:

• Heavy Duty Floor Vents• Smoke Vents• Equipment Hatches• Metal Building Curbs• Gravity Ventilator Skylights• Dome Style Skylights• Fire Extinguisher Cabinets

TMS STAINLESS STEEL ACCESS DOOR

16

FDSS

1"1"

1-3/4" (44.5)

(25.4) (25.4)

Opening (W)

Door (W)

Ceiling Opening (W)

Door (W)

Typical Ceiling Installation

W

Wall Opening (W)


Interior LatchRelease

1"1"

Hole for #10 SheetMetal or Machine Screw

Metal orWood Stud

Automatic door closer

Metal Lath andPlaster

PlasterguardDrywall Bead

Gypsum Board


Check on Availability. Check on Availability.


Check on Availability. Check on Availability.

ACCESS DOORS AND MORE ACCESS DOORS

WB


8" X 8"10" X 10"12" X 12"14" X 14"18" X 18"22" X 22"22" X 30"24" X 24"

$58.00$66.00$70.00$70.00$99.00$124.00$165.00$150.00

WB - WALL BOARD INTERIOR ACCESS DOOR

Door (W)1"

1-3/4"(44.5)

Model WB Typical Wall Installation

Opening (W)

1"

Catalog# Size List$W-11577W-11578W-11579W-11580W-11581

12" X 12"16" X 16"16" X 20"18" X 18"24" X 24"

$84.00$106.00$128.00$115.00$162.00

PWE FDPW

CT


12" X 12"12" X 24"18" X 18"22" X 30"24" X 24"

$90.00$131.00$124.00$198.00$165.00

CT - TILE CEILING INTERIOR ACCESS DOOR

FRAMINGCHANNEL

PLASTICGROMMET

Model PW Typical Wall Installation

1-3/4"(44.5)

Opening (W)

Door (W)


12" X 12"16" X 16"16" X 20"18" X 18"24" X 24"

$72.00$90.00$107.00$99.00$147.00

PW - PLASTER INTERIOR ACCESS DOOR


12" X 12"14" x 14"16" x 16"18" x 18"24" x 24"

$210.00$224.00$243.00$258.00$325.00

PWE - INTERIOR WALL ACCESS DOOR/FDPW - FIRE RATED PLASTER WALL INTERIOR ACCESS DOOR


12" X 12"12" X 24"18" X 18"22" X 30"24" X 24"

$139.00$176.00$172.00$277.00$247.00

CP - PLASTER CEILING INTERIOR ACCESS DOOR

17

Typical Wall InstallationTypical Wall Installation

Model PW Typical Wall Installation

1-3/4"(44.5)

Opening (W)

Door (W)


Interior LatchRelease

1"1"

Hole for #10 SheetMetal or Machine Screw

Metal orWood Stud

Automatic door closer

Metal Lath andPlaster

PlasterguardDrywall Bead

Gypsum Board

CP

PW


DUCT ACCESS DOORS

DRUGA

Catalog# Model List$W-11546W-11547W-11548W-11549W-11551W-11552W-11553W-11554W-11555W-11556W-11557W-11558

DRU846GADRU849GADRU8411GADRU12811GADRU12814GADRU12816GADRU161216GADRU161218GADRU161220GADRU161222GADRU161224GADRU161228GA

Duct Size5" - 6"7" - 9"

10" - 11"10" - 11"12" -14"15"- 16"15" - 16"17" - 18"19" - 20"21" - 22"23" - 24"25" - 28"

$49.00$49.00$49.00$70.00$70.00$70.00$96.00$96.00$96.00$96.00$96.00$96.00

• Tested to 20" pos. wg & 10" neg.wg pressure.

• Plastic knobs with brass inserts.• Cut out template for door provided.• Uninsulated.

The Druga high pressure round access dooris constructed of a stamped galvanized steelpanel and features a neoprene gasket.

The Duga high pressure sandwichdoor is constructed of a stamped galvanized steel panel and features a neoprene gasket.

DUGA - HIGH PRESSURE - SANDWICH DOOR FOR RECTANGULAR DUCT - UNINSULATED

Catalog# Model List$W-11542W-11543W-11544W-51726

DU106GADU128GADU1814GADU2418GA

Duct Size10"X6"12"X8"18"X14"24"X18"

$37.00$53.00$111.00$190.00

DUGA

• Tested to 20" pos wg & 10" neg. wg pressure.• Plastic knobs with brass inserts.• Cut out template for door provided.• Uninsulated.

DC - CIRCULAR CLEAN-OUT DOORS

Catalog# Model List$W-11559W-11560W-12371

DC8GADC10GADC12GA

Duct Size8" Diameter10" Diameter12" Diameter

$37.00$41.00$49.00

• Circular opening effective for duct cleaning.• Effortless opening and closing.

The DC circular clean-out door is airtight and has no frame to install and seal.

DC

Bolt fastenedand sealed toinner door

Hand knob withbrass insert

Closed cellneoprene

Outer door

Conical Spring

Inner door withflat side cover

DuctwallDuctwall

Galvanized Steel

Hand knob withbrass insert Galvanized Steel

Conical Spring

Inner door withflat side cover

Ductwall

Ductwall

Bolt fastenedand sealed toinner door

Closed cellneoprene

Outer door

18

DRUGA - HIGH PRESSURE - ROUND DUCT ACCESS DOOR - UNINSULATED

DUCT ACCESS DOORS

DF2GA - HIGH TEMPERATURE GREASE DOORS FOR GREASE DUCT, 2300°F

DF2GA Catalog# Model List$W-11561W-11562W-11563W-12339

D106F2GAD128F2GAD1814F2GAD2418F2GA

Duct Size10" X 6"12" X 8"18" X 14"24" X 18"

$127.00$182.00$260.00$487.00

The DF2GA is constructed of stamped sealed panels and features steelwing nuts. An excellent clean-out door.

• Cut out template provided.• Ceramic fiber gasket (2300°F,

meets NFPA 96 standards).• 16 ga. Black iron backing plate

for grease applications.

HAD - HINGED INSULATED DUCT ACCESS DOORS

HAD

Catalog# Size List$W-11523W-11524W-11525W-11526W-11527W-11528W-11529W-11530W-11531

6" X 6"8" X 8"

10" X 10"12" X 12"14" X 14"16" X 16”18" X 18"20" X 20"24" X 24"

$24.00$27.00$32.00$36.00$42.00$48.00$54.00$60.00$75.00

• High density closed cell gasketing-door to frame & frame to duct.

• Zinc plated continuous steel hinge.• Thumb-operated steel cam latch(es).• Hole size is 1" smaller than nominal.

The HAD Hinged Insulated Access Door is features galvanized steel construction and1” high density fiberglass insulation.

CAD - CAMMED DUCT ACCESS DOOR, INSULATED

CAD


6" X 6"8" X 8"

10" X 10"12" X 12"14" X 14"16" X 16"18" X 18"20" X 20"24" X 24"

$24.00$27.00$32.00$36.00$42.00$48.00$54.00$60.00$75.00

• High density closed cell gasketing - door to frame & frame to duct.

• Thumb-operated steel cam latch(es).• Hole size is 1" smaller than nominal.

The CAD Duct Access Door features galvanized steel construction and 1" high densityfiberglass insulation.

19

Zinc CoatedWing Nuts Galvanized Steel

Conical Spring

Inner door withsmooth inside cover

16 GaugeBlack IronBacking Plate

DuctwallDuctwall Bolt weldedand sealed toinner door

Fiberglass Rope orCeramic FiberGasket Outer door

Hinge

InsulationGasket

Hinge

InsulationGasket


DUCT ACCESS DOORS

HAD-P - HINGED INSULATED DUCT ACCESS DOORS - PRESS-ON FLANGED FRAME


6"X6"8"X8"

10"X10"12"X12"14"X14"16"X16"18"X18"20"X20"24"X24"

$28.00$30.00$35.00$38.00$51.00$58.00$67.00$76.00$92.00

HAD-P

• Double sided adhesive neoprene gasket - for easy installation.

• Zinc plated continuous steel hinge.• Thumb-operated steel cam latch(es).• Punched hole start for easy screw flange

installation.

The HAD-P Hinged Insulated Duct Access Door features galvanized steel constructionand high density closed cell gasketing from the door to the frame only. Features 1"high density fiberglass insulation.

RAD - ROUND DUCT NON-INSULATED DUCT ACCESS DOOR

RAD Catalog# Size List$W-11515W-11516W-11517W-11518W-11519W-11520W-11521

5" - 6"7" - 8"9" - 10"11"- 12"14" - 16"18" - 20"22" - 24"

$42.00$42.00$50.00$50.00$50.00$79.00$79.00

• 1/4" thick neoprene gasket door to duct.• Zinc plated continuous steel hinge.• Two draw-tight sash locks.• Loose striker plates for field installation.

The RAD Round Duct Non-Insulated Duct Access Door is a 20 gauge galvanized steelroll-formed door panel which features zinc plated hardware.

WAD - WALK-IN INSULATED ACCESS DOOR

Catalog# Size List$W-11486W-11487W-11489W-11490W-11491W-12509W-11492

18" X 36"18" X 48"24" X 36"24" X 48"24" X 60"24" X 66"24" X 72"

$232.00$248.00$205.00$221.00$252.00$263.00$289.00

20

WAD

• 1" fiberglass insulation.• Full length zinc plated continuous vertical

hinge.• Two Ventlock 202 door latches with interior

and exterior handles.• Hole size is nominal.

The WAD Walk-In Insulated Access Door features a 16gauge galvanized steel frame and 22 gauge galvanizedsteel double-wall door.

Opening DimensionW-2”(51)

Opening Dimension H-2” (51)

Hinge

Insulation

"Z" Flange

Gasket

Handle

1-1/4"

Latch

1"

STOCK ROOF HATCHES

SINGLE DUCT TERMINAL UNITS*

1" (25mm) FIBERGLASS INSULATION

14 ga. (1.9mm) GALVANIZED STEEL COVER

COMPRESSION CYLINDER TPE CONTINUOUS

HATCH SEAL

22 ga. (.8mm) GALVANIZED STEEL LINER

RED VINYL GRIP

14 ga. (1.9mm) GALVANIZED STEEL CURB FRAME

ROOFING BY OTHERS

12"(305mm)

WIDTH

1" (25mm) FIBERBOARD INSULATION

*Aluminum Roof HatchAvailable by Request.

Other sizes and colors available. Call for information.

RHG-1 GALVANIZED ROOF HATCHES

RHG-1

Catalog# Size List$W-10091 30" X 36" $1,195.00

STEEL ROOF HATCHES*

• 14 gauge galvanized steel curb, 12" highwith 4" wide flange including holes for securing to roof deck.

• Curb includes integral, rounded corner, andcounter flashing.

• EPDM draft seal gasket.• Heavy gauge automatic hold open arm with

red grip for opening and closing.• Exterior latch handle with integral padlock

hasp, inside locking handle with interiorpadlock hasp.

• ARI Certified sound performance.• Heavy gauge steel construction.• Low leakage damper design.• Thermally insulated inlet tube.• Acoustically and thermally insulated casing

meets UL181 and NFPA 90A requirements.• Slip and drive discharge connection.• Damper position indicator mark.• Electronic controls available.• Patented Flo-Cross Multipoint Flo-Sensor.

Pricing on next page

* We can strap two boxes together to make a dual box.

The RHG-1 Roof Hatch features a 14 gauge galvanized steel cover with a 22 gauge galvanized steel liner with a Hammertone powder coat gray finish and standard heavyduty hinge. 1” fiberboard insulation surrounds the base and there is 1” fiberglass insulation between the exterior door cover and liner. This roof hatch is compression operated with a shock absorbing cylinder for safe closure.

21

Unit CFM Range Length Height Width Inlet DimensionSize Min to Max (L) (H) (W) (D)

681012141624

0/100-5200/185-9250/290-14500/420-21000/580-26000/740-37000/1420-7100

15-1/2"15-1/2"15-1/2"15-1/2"15-1/2"15-1/2"

15"

8"10"

12-1/2"15"

17-1/2"18"

see above

12"12"14"16"20"24"

see above

5-7/8"7-7/8"9-7/8"11-7/8"13-7/8"15-7/8"

see above

Model SDV Pneumatic Controls• Pressure independent.• Pneumatic actuator.• Control enclosure included.• Damper position indicator on shaft.• Multifunction controller.• DA-NO/NC or RA-NO/NC.• Field calibration required.

Model SDV No Controls• Unit stocked less controls.• Control enclosure included.• Flo-Cross Multipoint Flo-Sensor.• 3/8” bare damper shaft.

SDV Dimensional Data

SDV


SINGLE DUCT TERMINAL UNITS

OPTIONAL HOT WATER COILS 1 ROW AND 2 ROW

OPTIONAL STOCK 3 FOOT ATTENUATORS

SINGLE DUCT TERMINALUNITS, NO CONTROLS

• Copper tubing-aluminum fins.• Housed in galvanized casing.• Coil mounts at discharge outlet.• Slip and drive duct connection.• Coil ships loose.• Optional mounting available.

• 1 insulation, open both ends.• S and D drive connections.

22

Size H W L A B C D L A B C D

68

1012141624

8”10

12-1/215

17-1/21818

12121416202438

5555

7-1/27-1/2

5

00

1-1/41-1/41-1/41-1/41-1/4

6-1/48-3/410-7/813-3/815-7/815-7/815-7/8

33

4-1/44-1/44-1/44-1/44-1/4

1/21/27/87/87/87/87/8

01-1/81-1/81-1/81-1/81-1/81-1/8

6-7/89

11-1/214

16-1/216-1/216-1/2

4-1/44-1/44-1/44-1/44-1/44-1/44-1/4

7/87/87/87/87/87/87/8

5555

7-1/27-1/2

5

1 Row 2 Row

We can solder Water ControlValves on for free if desired.


6"8"10"12"14"16"

24"X16"

$220.00$234.00$263.00$284.00$316.00$355.00$695.00

SINGLE DUCT TERMINALUNITS, PNEUMATIC CONTROLS


6"8"10"12"14"16"

24"X16"

$416.00$430.00$458.00$480.00$512.00$551.00$890.00

SINGLE DUCT TERMINAL UNITS, W/ENVIROSEAL LINING, NO CONTROLS


6"8"10"12"14"16"

24"X16"

$264.00$280.00$315.00$341.00$379.00$426.00$836.00

SINGLE DUCT TERMINAL UNITS, W/ENVIROSEAL LINING, PNEUMATIC CONTROLS


6"8"10"12"14"16"

24" x 16"

$460.00$476.00$511.00$537.00$575.00$622.00$1029.00

3-FOOT ATTENUATOR FORVAV BOXES


6"8"10"12"14"16"

24" x 16"

$124.00$134.00$157.00$175.00$213.00$236.00$236.00

HOT WATER REHEAT COIL, 1-ROW


6"8"10"12"14"16"

24" x 16"

$77.00$88.00$130.00$169.00$209.00$235.00$444.00

HOT WATER REHEAT COIL, 2-ROW


6"8"10"12"14"16"

24" x 16"

$122.00$157.00$210.00$263.00$380.00$426.00$604.00

A

L

BH

Offset direction may be eit her direction from the plant1 3/4

Centered on height

1

WC

D

Measurements in inches

Offset direction may be either direction from the plant

SINGLE DUCT AND DUAL DUCT VAV ACCESSORIES

CONTROLS AND ACCESSORIES

BELIMO WATER CONTROL VALVES W/ON-OFF FLOATINGPOINT 24VAC NON-SPRING RETURN ACTUATOR

23

Catalog# Belimo Part # List$W-12535W-12536W-12537W-12538W-12539W-12540W-12541

B208+LRB24-3B209+LRB24-3B210+LRB24-3B211+LRB24-3B212+LRB24-3B213+LRB24-3B214+LRB24-3

1/2"1/2"1/2"1/2"1/2"1/2"1/2"

0.460.801.201.903.004.707.40

$261.00$261.00$263.00$263.00$265.00$278.00$285.00

Size Cv Rating

Catalog# Pneumatic Actuators List$W-51160

W-10562

W-12578

MCP-3631-3000, 5-10 psi Pneumaticrotary actuatorMCP-3631-5000, 8-13 psi Pneumaticrotary actuatorMCP-3631-8000, 3-8 psi Pneumatic rotary actuator

$175.00

$175.00

$175.00

Catalog# Pneumatic Hot Water Valve List$W-12580 VCP-21150141, 1/2” 2-Way-NO-right

angle 3-8 psi 2.0 Cv HW Valve$120.00

Catalog# Electric Actuator List$W-12579 MEP-1505, 24 VAC

electric rotary actuator$229.00

Catalog# Electronic Relays List$W-12583 REE-1005, Heating/

Cooling Changeover Relay

$70.00

Catalog# Size List$W-12584W-12585

Transformer, 120-24 VACDisconnect, 120-277 VAC

$45.00$14.00

BELIMO WATER CONTROL VALVES W/PROPORTIONAL24VAC NON-SPRING RETURN ACTUATOR


B208+LRB24-SRB209+LRB24-SRB210+LRB24-SRB211+LRB24-SRB212+LRB24-SRB213+LRB24-SRB214+LRB24-SR

1/2"1/2"1/2"1/2"1/2"1/2"1/2"

0.460.801.201.903.004.707.40

$365.00$365.00$367.00$367.00$369.00$374.00$378.00

Size Cv Rating

BELIMO WATER CONTROL VALVES W/PROPORTIONAL/MFT24VAC NON-SPRING RETURN ACTUATOR


B208+LRX24-MFTB209+LRX24-MFTB210+LRX24-MFTB211+LRX24-MFTB212+LRX24-MFTB213+LRX24-MFTB214+LRX24-MFT

1/2"1/2"1/2"1/2"1/2"1/2"1/2"

0.460.801.201.903.004.707.40

$365.00$365.00$367.00$367.00$369.00$374.00$378.00

Size Cv Rating

BELIMO WATER CONTROL VALVES W/ON-OFF FLOATINGPOINT 24VAC NON-SPRING RETURN ACTUATOR


B308+LRB24-3B309+LRB24-3B310+LRB24-3B311+LRB24-3B312+LRB24-3B313+LRB24-3B318+LRB24-3

1/2"1/2"1/2"1/2"1/2"1/2"3/4"

0.460.801.201.903.004.707.40

$304.00$304.00$310.00$310.00$316.00$320.00$387.00

Size Cv Rating

BELIMO WATER CONTROL VALVES W/PROPORTIONAL24VAC NON-SPRING RETURN ACTUATOR


B308+LRB24-SRB309+LRB24-SRB310+LRB24-SRB311+LRB24-SRB312+LRB24-SRB313+LRB24-SRB318+LRB24-SR

1/2"1/2"1/2"1/2"1/2"1/2"3/4"

0.460.801.201.903.004.707.40

$435.00$435.00$438.00$438.00$442.00$446.00$486.00

Size Cv Rating

BELIMO WATER CONTROL VALVES W/PROPORTIONAL/MFT24VAC NON-SPRING RETURN ACTUATOR


B308+LRX24-MFTB309+LRX24-MFTB310+LRX24-MFTB311+LRX24-MFTB312+LRX24-MFTB313+LRX24-MFTB318+LRX24-MFT

1/2"1/2"1/2"1/2"1/2"1/2"3/4"

0.460.801.201.903.004.707.40

$550.00$550.00$553.00$553.00$555.00$564.00$590.00

Size Cv Rating

Catalog# Electric Thermostat List$W-12582W-12581

TF-1111, 24 VAC, 2 Position, 550-850FTC-4111, 24 VAC, 2 Position,-400-1200F

$146.00$156.00

Transformers and Disconnects

• 2-way NPT valves• For chilled/hot water or

60% glycol• 900 rotation

• NPT female end fitting• Body - forged brass, N.P.• Stainless steel ball and stem

• 2-way NPT valves• For chilled/hot water or

60% glycol• 900 rotation

• NPT female end fitting• Body - forged brass, N.P.• Stainless steel ball and stem


LINEAR SLOT DIFFUSERS

MATCHING INSULATED DIFFUSER PLENUMS

24

Catalog# Size List$W-11176W-11177W-11178W-11182W-11183W-11184W-11173W-11174W-11175W-11179W-11180W-11181

48" x 1 Slot x 3/4"60" x 1 Slot x 3/4"72" x 1 Slot x 3/4"48" x 2 Slot x 3/4"60" x 2 Slot x 3/4"72" x 2 Slot x 3/4"48" x 1 Slot x 1"60" x 1 Slot x 1"72" x 1 Slot x 1"48" x 2 Slot x 1"60" x 2 Slot x 1"72" x 2 Slot x 1"

$143.00$178.00$214.00$194.00$242.00$290.00$163.00$204.00$245.00$214.00$267.00$321.00

• Air Managers Linear Slot Diffusers• Fully adjustable horizontal pattern controller in stock• 1 slot and 2 slot, 3/4" or 1" slot widths stocked.• Excellent VAV applications• Can be field cut to custom lengths

• Air Managers insulated linear plenum boot.• Matching fit for stock linear slot diffusers.• Galvanized steel construction.• Stocked in 48", 60" and 72" lengths.

Diffuser Plenums are designed for single diffusers or continuous runsand can be used for supply or returnapplications. They are available withan Inlet collar round up to 8" and flatoval up to 14".

Linear Slot Diffusers feature aluminum construction with endcaps or butt caps. They arestocked in a bright White finishwith black pattern controller.

LINEAR SLOT DIFFUSERS FROM STOCK OR LOCALLY CUSTOM MADE

LINEAR SLOT DIFFUSERS - LTSC FRAME



$127.00$164.00$250.00$127.00$164.00$250.00$127.00$164.00$250.00$127.00$164.00$250.00



$184.00$229.00$275.00$245.00$306.00$367.00$204.00$255.00$306.00$265.00$331.00$397.00

LINEAR SLOT DIFFUSERS - MCS FRAME

LTSC

INLETCOLLARROUND UPTO 10”FLAT OVALUP TO 14”

1/2 INCH INTERNALINSULATIONMEETS NFPA 90A AND 90B,SMACNA AND ASTM C 1071,TYPE 1

PLENUM MATERIAL: 24 GAUGEGALVANIZED STEEL

45 DEGREE TURN

VARIES1/2” MIN.

13” on 3/4”_

2”14” on 2-1/2” & 3”

DUCT WIDTH

CEILINGOPENINGWIDTH

2-1/2” on 3/4”_

2” SLOT4” on 2-1/2” & 3” SLOT

VARIES

INLETDAMPER(OPTIONAL)

2-1/2"

1-1/8" 3/4"

2-1/2"

5/8"

3/8" 7/8"

Concealed mounting with hemmed plenumLTSC Frame

Concealed mounting in hard surfacesMCS Frame

Inlet collar round up to 8"Flat oval up to 14".

PERFORATED LAY-IN DIFFUSERS

PERFORATED ADJUSTABLE CURVED BLADE LAY-IN T-BAR AND MATCHING RETURN

25

• Tuttle and Bailey curved blade perforated diffuser.• Round or square neck.• Unit is standard with adjustable curved blade core in neck.• Adjustable horizontal to vertical air pattern.• Diffuser stocked as 4 way blow pattern standard.• 24" x 24" lay-in ceiling module with removable perforated face.• White baked enamel finish.

Catalog# Size Max CFM @ NC List$W-10213W-10214W-10215W-10216W-10217W-10218W-10220W-10221W-10222W-10223W-10244W-10225

6"8"10"12"14"16"

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"

6"8"10"12"14"16"

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"

6"8"10"12"14"16"

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"

311@40469@40745@40732@40996@401094@40314@40473@40639@40840@401088@401396@40

$71.00$71.00$71.00$71.00$71.00$77.00$71.00$71.00$71.00$71.00$71.00$77.00

PV PR

PRODUCT DIMENSIONSPV, APV Series

05/06 CD-2— 5 —

MODULE SIZE LESS 1TYPICAL OF ALL FRAME STYLES

11/4 25

Frame Details: 24x24 Module

Frame SF, Surface Mount

MODULE SIZE LESS 1/4

INTEGRAL SPLINE 2 SIDES

23-15/16

Frame PL, Spline


23-3/85/16

Frame NR, Narrow Regress


233/8

Frame TG, Tegular3/8 Drop Face


23

Frame LT, Lay-in T-Bar

EARTHQUAKE TAB

3-3/42-3/16

5

DUCT SIZE LESS 1/8

Side View/Damper DetailSquare Neck with SF Frame

OPTIONAL OBD

1-WAY 2-WAY 3-WAY 4-WAY2-WAYCORNER

Air Pattern Options (specify when ordering)

EARTHQUAKE TAB

3-3/4

DUCT DIAMETERLESS 1/8

2-3/16

Side View DetailRound Neck with SF Frame

Minimum ceiling opening for SF is 23-1/4.

DIMENSIONS IN INCHES 05/06 CD-2— 5 —


23-3/85/16


EARTHQUAKE TAB

3-3/42-3/16

5

DUCT SIZE LESS 1/8


OPTIONAL OBD



EARTHQUAKE TAB

3-3/4


2-3/16


DIMENSIONS IN INCHES

CD

Ad

justab

le Cu

rve Blad

eP

erforated

Diffu

sers

07/06

42437_Final Text 7/18/06 2:14 PM Page 291


05/06 CD-2— 5 —


11/4 25





23-15/16

Frame PL, Spline


23-3/85/16



233/8



23


EARTHQUAKE TAB

3-3/42-3/16

5

DUCT SIZE LESS 1/8


OPTIONAL OBD



EARTHQUAKE TAB

3-3/4


2-3/16





23-3/85/16


EARTHQUAKE TAB

3-3/42-3/16

5

DUCT SIZE LESS 1/8


OPTIONAL OBD



EARTHQUAKE TAB

3-3/4


2-3/16



CD

Ad

justab

le Cu

rve Blad

eP

erforated

Diffu

sers

07/06



05/06 CD-2— 5 —


11/4 25





23-15/16

Frame PL, Spline


23-3/85/16



233/8



23


EARTHQUAKE TAB

3-3/42-3/16

5

DUCT SIZE LESS 1/8


OPTIONAL OBD



EARTHQUAKE TAB

3-3/4


2-3/16





23-3/85/16


EARTHQUAKE TAB

3-3/42-3/16

5

DUCT SIZE LESS 1/8


OPTIONAL OBD



EARTHQUAKE TAB

3-3/4


2-3/16



CD

Ad

justab

le Cu

rve Blad

eP

erforated

Diffu

sers

07/06


MODEL PV-LT MODEL PV-NR, Narrow Regress MODEL PR-LT MODEL PVR-NR

PV-LT, CURVED BLADE, PERFORATED FACE, 24”x 24 ”LAY-IN PANEL

PR-LT, PERFORATED FACE RETURN, 24 x 24 LAY-IN PANEL PVR-NR, PERFORATED FACE RETURN, 24x24 LAY-IN PANEL, NARROW REGRESS

PV-NR, CURVED BLADE, PERFORATED FACE, 24 x 24 LAY-IN PANEL, NARROW REGRESS

Catalog# Size Max CFM @ NC List$W-10234W-10235W-10236W-10237W-10238W-10239W-12294W-12295W-12296W-12297W-12298W-12299W-12300W-12302W-12303

6"8"10"12"14"16"

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"22"x22"46"x22"

275@34488@38763@411099@431495@461953@49350@35622@39972@421400@45

--

3150@494706@519839@52

$52.00$52.00$52.00$52.00$54.00$57.00$57.00$57.00$57.00$59.00$59.00$62.00$62.00$62.00$113.00


$69.00$69.00$69.00$71.00$71.00$73.00$69.00$69.00$69.00$71.00$71.00$73.00

Catalog# Size Max CFM @ NC List$W-10317W-10318W-10319W-10320W-10321W-10322W-10323W-10324W-10325W-10326W-10327W-10328

311@40469@40745@40732@40996@401094@40314@40473@40639@40840@401088@401396@40

$81.00$81.00$81.00$83.00$83.00$86.00$81.00$81.00$81.00$83.00$83.00$86.00

— 34 —CD-2 05/06

PRODUCT DIMENSIONSPR, APR



Side View/Damper DetailSquare Neck

Side View/Damper DetailRound Neck

— 34 —CD-2 05/06


CD

Ret

urn

Dif

fuse

rsP

erfo

rate

d D

iffu

sers

07/06



PERFORATED LAY-IN DIFFUSERS

PERFORATED FACE MODULAR CORE LAY-IN T-BAR AND MATCHING RETURN

• Tuttle and Bailey modular core perforated diffuser.• Square neck.• Removable modular core design.• Diffuser is adjustable to any blow pattern.• Diffuser stocked with cores set at 4 way blow standard.• 24" x 24" lay-in ceiling module with removable perforated face.• White baked enamel finish.

Catalog# Size Max CFM @ NC List$W-10227W-10228W-10229W-10230W-10231W-10232W-10233

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"

175@22311@27486@31700@35

---

$69.00$79.00$87.00$97.00$106.00$120.00$128.00

PM PR

— 26 —CD-2 05/06

PRODUCT DIMENSIONSPM, APM Series

Frame Details: SF, LT, TG & NR


Frame TG, Tegular3/8” Drop Face



2-Way Corner1-Way 2-Way Opposite 3-Way 4-Way VERTICAL

Modular Core Adjustments

DIMENSIONS IN INCHES— 26 —CD-2 05/06


CD

Mo

du

lar

Co

reP

erfo

rate

d D

iffu

sers

07/06

Optional SOBD

1 3/16

H

LT23 3/4

H

Listed - 1/4SFPM: Listed + 3

PM: Listed + 7APM: Listed + 5

H

APM: Listed + 2 3/4

Ceiling Opening

Listed - 1/8

H

NR 23 11/16

23 25/64

Listed - 1/8TG

22 7/8

23 3/4

H

Listed - 1/8


— 26 —CD-2 05/06











CD

Mo

du

lar

Co

reP

erfo

rate

d D

iffu

sers

07/06

Optional SOBD

1 3/16

H

LT23 3/4

H



H

APM: Listed + 2 3/4

Ceiling Opening

Listed - 1/8

H

NR 23 11/16

23 25/64

Listed - 1/8TG

22 7/8

23 3/4

H

Listed - 1/8


— 26 —CD-2 05/06











CD

Mo

du

lar

Co

reP

erfo

rate

d D

iffu

sers

07/06

Optional SOBD

1 3/16

H

LT23 3/4

H



H

APM: Listed + 2 3/4

Ceiling Opening

Listed - 1/8

H

NR 23 11/16

23 25/64

Listed - 1/8TG

22 7/8

23 3/4

H

Listed - 1/8


MODEL PM-LT MODEL PM-NR, Narrow Regress MODEL PR-LT MODEL PVR-NR

PM-LT, MODULAR CORE, PERFORATED FACE, 24" x 24" LAY-IN PANEL PM-NR, MODULAR CORE, PERFORATED FACE, 24" x 24" LAY-IN PANEL, NARROW REGRESS

Catalog# Size Max CFM @ NC List$W-10329W-10330W-10331W-10332W-10333W-10334W-10335

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"

175@22311@27486@31700@35

---

$66.00$73.00$82.00$91.00$98.00$109.00$120.00

6"8"10"12"14"16"

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"

PR-LT, PERFORATED FACE RETURN, 24 x 24 LAY-IN PANEL PVR-NR, PERFORATED FACE RETURN, 24x24 LAY-IN PANEL, NARROW REGRESS


6"8"10"12"14"16"

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"22"x22"46"x22"

275@34488@38763@411099@431495@461953@49350@35622@39972@421400@45

--

3150@494706@519839@52

$52.00$52.00$52.00$52.00$54.00$57.00$57.00$57.00$57.00$59.00$59.00$62.00$62.00$62.00$113.00


$69.00$69.00$69.00$71.00$71.00$73.00$69.00$69.00$69.00$71.00$71.00$73.00

— 34 —CD-2 05/06






— 34 —CD-2 05/06


CD

Ret

urn

Dif

fuse

rsP

erfo

rate

d D

iffu

sers

07/06


27

PERFORATED LAY-IN DIFFUSERSPERFORATED FACE MOUNTED ADJUSTABLE AIR PATTERN LAY-IN T-BAR AND MATCHING RETURN

PERFORATED LAY-IN SCREENS

PERFORATED FACE LAY-IN T-BAR SCREENS

• Tuttle and Bailey economy perforated diffuser.• Round or square neck.• Unit is standard with face mounted adjustable air pattern.• Diffuser is field adjustable to any blow pattern.• Diffuser stocked with 4 way blow pattern preset.• 24" x 24" lay-in ceiling module with removable perforated face.• White baked enamel finish.

• Matching steel perforated, non-ducted.• White baked enamel finish.

Catalog# Size Max CFM @ NC List$W-12282W-12283W-12284W-12285W-12286W-12287W-10241W-10242W-10243W-10244W-10245W-10246W-10247

6"8"10"12"14"16"

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"

275@43489@49764@541100@571497@601955@63350@45622@51972@561400@60

---

$53.00$53.00$53.00$53.00$56.00$58.00$58.00$58.00$58.00$61.00$61.00$63.00$73.00

PP

PTL

PR

PRODUCT DIMENSIONSPP, APP Series


— 15 — 05/06 CD-2




— 15 — 05/06 CD-2


CD

Face M

ou

nted

Pattern

Perfo

rated D

iffusers

07/06


MODEL PP-LT

24" x 12"

PP-LT, MOUNTED PATTERN DEFLECTORS, PERFORATEDFACE, 24 x 24 LAY-IN PANEL

PTL-LT, PERFORATED FACE, 24 x 24 LAY-IN PANEL, NON-DUCTED PTL-NR, PERFORATED FACE, 24 x 24 LAY-IN PANEL, NON-DUCTED, NARROW REGRESS

Catalog# Size Max CFM @ NC List$W-10963W-10964W-10965

24"x12"24"x24"48"x24"

2548@395250@42

-

$27.00$29.00$47.00

Catalog# Size List$W-11171 24"x24" $38.00

— 34 —CD-2 05/06






— 34 —CD-2 05/06


CD

Ret

urn

Dif

fuse

rsP

erfo

rate

d D

iffu

sers

07/06


MODEL PR-LT

— 30 —CD-2 05/06

PRODUCT DIMENSIONSPTL, APTL Series

B

A

NOMINALMODULE SIZE

MODULE LESS1/4

9/16


Module A BSize Dimension Dimension

12x12 11-3/4 11-3/416x16 15-3/4 15-3/420x20 19-3/4 19-3/424x12 23-3/4 11-3/424x24 23-3/4 23-3/448x24 47-3/4 23-3/4



CD

Ret

urn

Pan

elP

erfo

rate

d D

iffu

sers

07/06


24" x 24"48" x 24"

PR-LT, PERFORATED FACE RETURN, 24 x 24 LAY-IN PANEL


6"8"10"12"14"16"

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"22"x22"46"x22"

275@34488@38763@411099@431495@461953@49350@35622@39972@421400@45

--

3150@494706@519839@52

$52.00$52.00$52.00$52.00$54.00$57.00$57.00$57.00$57.00$59.00$59.00$62.00$62.00$62.00$113.00


PERFORATED SURFACE MOUNTPERFORATED FACE SURFACE MOUNT SUPPLY AND RETURN

• Flat frame construction with screw holes.• Square neck with removable perforated face.• Basic curved blade perforated diffuser.• Diffuser stocked as 4 way blow pattern standard.• White baked enamel finish.

• Flat frame construction with screw holes.• Square neck with removable perforated face.• White baked enamel finish.

Catalog# Size List$W-10886W-10887W-10888W-10889W-10890W-10891W-10892W-10893W-10894W-10895

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"20"x20"22"x22"24"x24"

$79.00$79.00$93.00$105.00$134.00$144.00$155.00$176.00$198.00$219.00

V-PERF-S

V-PERF-R

V-PERF-S, PERFORATED FACE,CURVED BLADE SUPPLY,

SURFACE MOUNT


6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"20"x20"22"x22"24"x24"

$32.00$36.00$43.00$47.00$55.00$64.00$75.00$79.00$86.00$105.00

V-PERF-R, PERFORATED FACE,CURVED BLADE SUPPLY,

SURFACE MOUNT

CEILING OPENING IS DUCT SIZE

CEILING OPENING IS DUCT SIZE

SUPPLY

RETURN

29

MODULAR CORE DIFFUSERSMODULAR CORE T-BAR LAY-IN AND SURFACE MOUNT

ARCHITECTURAL CEILING PLAQUE DIFFUSER LAY-INPLAQUE DIFFUSER T-BAR LAY-IN

• Square neck.• Each individual core can be removed and rotated to provide

the required air pattern.• T-bar lay-in and surface mount units stocked.• White baked enamel finish.

Tuttle and Bailey lay-in plaque diffusers feature a roundneck connection and a choice of six round neck sizes.The all stamped process means no miter lines orunsightly fasteners.

• Diffuser model is 24" square.• May be used for supply or return.• 1-1/4" collar for easy duct connection.• White baked enamel finish.• Removable plaque face.

SQD-LT

T-1100

SQD-SB

SQD-LT, MODULAR CORE, 24 x 24 LAY-IN PANEL

SQD-SB, MODULAR CORE, BEVELED FRAME, SURFACE MOUNT

Catalog# Size Max CFM @ NC List$W-10122W-10123W-10124W-10125W-10126W-10127W-10128W-10129W-10130W-12599

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"20"x20"22"x22"24"x24"

275@28489@33764@381100@411497@441956@472475@493056@523697@534400@55

$48.00$52.00$62.00$78.00$88.00$99.00$108.00$152.00$160.00$167.00

Catalog# Size Max CFM @ NC List$W-10131W-10132W-10133W-10134W-10135W-10136W-10137W-12598

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"20"x20"

275@28489@33764@381100@411497@441956@472475@493056@52

$91.00$93.00$107.00$120.00$130.00$142.00$152.00$171.00

T-1100, ARCHITECTURAL PLAQUE DIFFUSER, 24 x 24 LAY-IN PANEL

Catalog# Size Max CFM @ NC List$W-12322W-12323W-12324W-12325W-12326W-12327

6"8"10"12"14"15"

280@34490@38770@411100@431500@431720@46

$79.00$79.00$79.00$79.00$79.00$79.00

PRODUCT DIMENSIONSModular Core DiffuserSQD, AQD Steel & Aluminum

— 93 — 05/06 CD-1— 93 —

Frame Details: SF, SB, LT, TG & NR


CD

Mo

du

lar Co

reS

qu

are/Ro

un

d D

iffusers

07/06


PRODUCT DIMENSIONSModular Core DiffuserSQD, AQD Steel & Aluminum

— 93 — 05/06 CD-1— 93 —

Frame Details: SF, SB, LT, TG & NR


CD

Mo

du

lar Co

reS

qu

are/Ro

un

d D

iffusers

07/06



LOUVERED FACE CEILING DIFFUSERS - Lay-in and Surface MountLOUVERED FACE LAY-IN AND SURFACE MOUNT DIFFUSER

CURVED BLADE CEILING DIFFUSERS - Surface and Exposed Mount

CURVED BLADE SURFACE MOUNT CEILING DIFFUSERS

• Tuttle and Bailey louvered face diffuser.• Square neck sizes stocked in 3" increments.• 4-way fixed air pattern stocked.• Surface mount ceiling opening is duct plus 1".• Inner assembly spring loaded and removable.

• Excellent for vav and cold air devices.• White baked enamel finish.• Removable core.• Surface mount is beveled frame.

• TRU AIRE adjustable curved blade ceiling diffuser.• Also designed for low sidewall, high sidewall applications.• White baked enamel finish.• Curved Blade Surface Mount Ceiling Diffusers feature a 4 way fixed

discharge pattern• Excellent for vav and cold air devices.


6"x6"9"x9"

12"x12"15"x15"18"x18"21"x21"

225@34506@37900@371406@402025@412756@42

$84.00$89.00$116.00$147.00$177.00$205.00

M-LT M-SB

M-LT, LOUVERED FACE DIFFUSER, 24" x 24" LAY-IN PANEL M-SB, LOUVERED FACE DIFFUSER, 24" x 24", SURFACEMOUNT, BEVELED FRAME


6"x6"9"x9"

12"x12"15"x15"18"x18"21"x21"

225@34506@37900@371406@402025@412756@42

$42.00$47.00$74.00$105.00$137.00$183.00


6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"

$31.00$37.00$43.00$47.00$64.00$79.00$96.00

— 37 —

PRODUCT DIMENSIONSM, AM Series - Fixed PatternSquare/Rectangular Neck

Frame Details: LT, PL, YM, SB, SF & NR

Ceiling Module

Ceiling Module minus 1/4

2-1/8

Ceiling Module

2-1/83/8

3/8

2-1/8

13/16

Ceiling ModuleDuct plus 5

Ductsize

plus 1

2-1/87/8

1-1/2

Ceiling Opening Duct plus 3-1/2

Duct Size

Duct Size minus 1/8

Duct plus 5-9/16

2-1/8

1/4

3/8 23-3/8

24

1-1/2

Duct Size

Duct Size minus 1/8

2-1/8


Frame YM, Snap-In

Frame PL, Spline

Frame SB, Surface Beveled

Frame SF, Surface Flat


* Max neck size for NR Frame is 18x18

— 37 — 05/06 CD-1DIMENSIONS IN INCHES

CD

Lo

uvered

Face

Sq

uare/R

ou

nd

Diffu

sers

07/06


— 37 —

PRODUCT DIMENSIONSM, AM Series - Fixed PatternSquare/Rectangular Neck

Frame Details: LT, PL, YM, SB, SF & NR

Ceiling Module

Ceiling Module minus 1/4

2-1/8

Ceiling Module

2-1/83/8

3/8

2-1/8

13/16

Ceiling ModuleDuct plus 5

Ductsize

plus 1

2-1/87/8

1-1/2

Ceiling Opening Duct plus 3-1/2

Duct Size

Duct Size minus 1/8

Duct plus 5-9/16

2-1/8

1/4

3/8 23-3/8

24

1-1/2

Duct Size

Duct Size minus 1/8

2-1/8


Frame YM, Snap-In

Frame PL, Spline

Frame SB, Surface Beveled

Frame SF, Surface Flat


* Max neck size for NR Frame is 18x18

— 37 — 05/06 CD-1DIMENSIONS IN INCHES

CD

Lo

uvered

Face

Sq

uare/R

ou

nd

Diffu

sers

07/06


THERMALLY POWERED VAV PLAQUE DIFFUSERVSD-4, RICKARD THERMALLY POWERED VAV PLAQUE DIFFUSER FOR LAY-IN

VSD-4

Catalog# Size Max CFM @ NC List$W-12602W-12603W-12604W-12605

6"8"10"12"

196@25349@28545@34785@44

$505.00$505.00$505.00$505.00

DATE

DRW No.

REV

FILE: VSD4US

SCALE

CHECKED BY

9/07

RADUS01

N/A

N.T.S.

VSD 4 - Thermally Powered Variable VolumeVariable Geometry Square Diffuser

United States Version

www.rickardus.comThese drawings do not detail every aspect of the product. This submittal demonstrates general product dimensions; drawings are not to scale.

Rickard Air Diffusion reserves the right to make changes without notice. Copyright © 2007 Rickard Air Diffusion

Available ColorsWhite

Notes:* - For Relief Rings, also see submittal RADUS05

Dimensions in inches

NR

9/16

5/16

24

PL

Spline hardwareby others

3/8

243/8

YM

Mounting hardwareby others

13/16

24

SF**

** For SF applications, a separate trim frame ships with a LT diffuser

24 3/8Ceiling Opening

25 1/4

LT 23 3/4

Cooling Setpoint Adjustment

Heating Offset Adjustment

Minimum Airflow Adjustment

Neck - 1/8 *

18 1/4

2 1/2

1 3/8 for sizes 10 & 12

1 1/8 for size 61 1/4 for size 8

7 1/4

DATE

DRW No.

REV

FILE: VSD4US

SCALE

CHECKED BY

9/07

RADUS01

N/A

N.T.S.

VSD 4 - Thermally Powered Variable VolumeVariable Geometry Square Diffuser

United States Version

www.rickardus.comThese drawings do not detail every aspect of the product. This submittal demonstrates general product dimensions; drawings are not to scale.

Rickard Air Diffusion reserves the right to make changes without notice. Copyright © 2007 Rickard Air Diffusion

Available ColorsWhite

Notes:* - For Relief Rings, also see submittal RADUS05

Dimensions in inches

NR

9/16

5/16

24

PL

Spline hardwareby others

3/8

243/8

YM

Mounting hardwareby others

13/16

24

SF**

** For SF applications, a separate trim frame ships with a LT diffuser

24 3/8Ceiling Opening

25 1/4

LT 23 3/4

Cooling Setpoint Adjustment

Heating Offset Adjustment

Minimum Airflow Adjustment

Neck - 1/8 *

18 1/4

2 1/2

1 3/8 for sizes 10 & 12

1 1/8 for size 61 1/4 for size 8

7 1/4

• Thermally Actuated using Wax Bulb Technology.• 10 Yr. Replacement Parts Warranty.• No Electrical Requirements. • No Tools Needed to Set Temperature Setpoints.• Reversing Changeover.• No Routine Maintenance Required.• Self Contained • ARI Certified.

31

ROUND NECK STAMPED LOUVERED DIFFUSER LAY-INHIGH VOLUME SQUARE FACE LOUVERED DIFFUSER

• Excellent performance for both vav and cold air devices.• Choice of six round neck sizes.• Diffuser module is 24" square.• 1-1/4" collar for easy duct connection.• White baked enamel finish.• Earthquake tabs standard.

Tuttle and Bailey high volume 2 cone louvered face diffuser is constructed with a stamped process which features no miter lines or unsightly fasteners. The anti-streak, anti-smudge design keeps your ceiling clean.

1200

• Tuttle and Bailey round face high capacity diffuser.• Heavy gauge steel construction.• Core is easily removed for installation or maintenance.• Stocked in 2" increments.• Two horizontal discharge settings.• Center button is removable for access to damper.• White baked enamel finish.

P3

1200, ROUND NECK 2-CONE LOUVERED FACE DIFFUSER, LAY-IN


6"8"10"12"14"15"

216@29384@33600@36864@391069@381227@38

$71.00$71.00$71.00$71.00$71.00$71.00

P3, THREE CONE ROUND CEILING DIFFUSER

Catalog# Size Max CFM @ NC POS1.2 List$W-10187W-10188W-10189W-10190W-10191W-10192W-10193W-12606W-12650

6"8"10"12"14"16"18"20"24"

275@37/42490@39/44763@41/451100@43/461490@44/471960@45/482480@41/443060@47/494400@49/50

$110.00$118.00$129.00$147.00$167.00$204.00$246.00$267.00$309.00

Nominal RoundDuct Size D

B C E(Pos. 1)

E(Pos. 2)

060810121416182024

6-1/28-1/210-1/212-1/214-1/216-1/218-1/220-1/224-1/2

11-1/814-3/418-1/4

222629

32-1/236

43-1/4

1-3/42-1/82-7/83-1/83-3/8

44-3/45-7/87-3/4

1-1/81-1/22-1/82-3/82-5/83-1/43-7/84-7/86-5/8

ROUND FACE FIXED DISCHARGE CONE DIFFUSERHIGH CAPACITY ROUND FACE DIFFUSER - Exposed or Surface Mount

— 16 —CD-1 05/06 — 16 —

PRODUCT DIMENSIONSS1200, A1200 Series Fixed Pattern

Frame Details: SF, LT, PL & NR

eludoM 42x42eludoM 21x21


*Surface mount frame style includes an aluminum trimframe for installation

Nom.DuctSize(in.)

Steel &Aluminum

A

SeriesSteel

B

SeriesAluminum

B6 5-7/8 1-1/2 28 7-7/8 1-1/2 2

Nom.DuctSize(in.)

Steel &Aluminum

A

SeriesSteel

B

SeriesAluminum

B

6 5-7/8 1 2

8 7-7/8 1 2

10 9-7/8 1-1/2 2

12 11-7/8 1-1/2 2

14 13-7/8 1-1/2 2

15 14-7/8 1-1/2 2

1200 Series 1200 A1200 1200 Series 1200 A1200

CD

Ste

pd

ow

n 2

-Co

ne

Sq

uar

e/R

ou

nd

Dif

fuse

rs

07/06


PRODUCT DIMENSIONSP3, AP3 Series

— 104 —CD-1 05/06

Model P3, AP3

Adjustment of P3 &AP3, is achieved byremoving the two innercores as one unit andrepositioning sixscrews. Spring lockholds inner core unit inplace and allows foreasy removal &replacement.

Note: At position 1, maximum capacity is obtained. At position 2, induction is increased.

P3 AP3


Nominal RoundDuct Size

DB C

E(Position 1)

E(Position 2)

06 6-1/2 11-1/8 1-3/4 1-1/8

08 8-1/2 14-3/4 2-1/8 1-1/2

10 10-1/2 18-1/4 2-7/8 2-1/8

12 12-1/2 22 3-1/8 2-3/8

14 14-1/2 26 3-3/8 2-5/8

16 16-1/2 29 4 3-1/4

18 18-1/2 32-1/2 4-3/4 3-7/8

Nominal RoundDuct Size

DB C

E(Position 1)

E(Position 2)

06 6-1/2 11-1/8 1-3/4 1-1/8

08 8-1/2 14-3/4 2-1/8 1-1/2

10 10-1/2 18-1/4 2-7/8 2-1/8

12 12-1/2 22 3-1/8 2-3/8

14 14-1/2 26 3-3/8 2-5/8

16 16-1/2 29 4 3-1/4

18 18-1/2 32-1/2 4-3/4 3-7/8

20 20-1/2 36 5-7/8 4-7/8

24 24-1/2 43-1/4 7-3/4 6-5/8

30 30-1/2 53-3/4 8-1/8 6-5/8

36 36-1/2 64-1/2 10-1/8 8-3/8

CD

Ro

un

d 3

-Co

ne

Sq

uar

e/R

ou

nd

Dif

fuse

rs

07/06



STATIONARY RETURN GRILLESTEEL BAR STYLE RETURN GRILLE - EXPOSED OR SIDEWALL SURFACE MOUNT

Catalog# Size List$W-10436W-10437W-10438W-10439W-10440W-10441W-10442W-10443W-10444W-10445W-10446W-10447W-10448W-10449W-10450W-10451W-10452W-10453W-10454W-10455W-10456W-10457W-10458W-10459W-10460W-10461W-10462W010463W-10464W-10465W-10466W-10467W-10468W-10469W-10470W-10471W-10472W-10473W-10474W-10475W-10476W-10477

6"x4"6"x6"8"x4"8"x6"8"x8"10"x4"10"x6"10"x8"10"x10"12"x4"12"x6"12"x8"12"x10"12"x12"14"x4"14"x6"14"x8"14"x10"14"x12"14"x14"16"x4"16"x6"16"x8"16"x10"16"x12"16"x14"16x1618"x4"18"x6"18"x8"18"x10"18"x12"18"x14"18"x16"18"x18"20"x4"20"x6"20"x8"20"x10"20"x12"20"x14"20"x16"

$16.00$17.00$17.00$19.00$20.00$19.00$20.00$22.00$23.00$20.00$22.00$26.00$27.00$30.00$22.00$26.00$27.00$30.00$32.00$36.00$23.00$27.00$30.00$32.00$36.00$40.00$43.00$26.00$29.00$32.00$36.00$39.00$44.00$48.00$54.00$29.00$30.00$33.00$37.00$40.00$47.00$53.00

Catalog# Size List$W-10478W-10479W-12623W-10480W-10481W-10482W-10483W-10484W-10485W-10486W-10487W-10488W-10489W-10490W-10491W-10492W-10493W-10494W010495W-10496W-10497W-10498W-10499W-10500W-10501W-10502W-10503W-10504W-10505W-10506W-10507W-10508W-10509W-10510W-12624W-12625W-12626W-12627W-12628W-12629W-12630

20"x18"20"x20"22"x10"22"x22"24"x4"24"x6"24"x8"24"x10"24"x12"24"x14"24"x16"24"x18"24"x20"24"x24"30"x4"30"x6"30"x8"30"x10"30"x12"30"x14"30"x16"30"x18"30"x20"30"x24"30"x30"36"x6"36"x8"36"x10"36"x12"36"x14"36"x16"36"x18"36"x20"36"x24"36"x30"36"x36"46"x22"48"x12"48"x24"48"x36"48"x48"

$58.00$65.00$39.00$80.00$30.00$36.00$39.00$41.00$46.00$53.00$61.00$63.00$77.00$92.00$40.00$44.00$48.00$54.00$58.00$68.00$78.00$87.00$95.00$119.00$153.00$53.00$60.00$65.00$74.00$84.00$94.00$104.00$113.00$147.00$198.00$256.00$161.00$95.00$197.00$372.00$472.00


6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"20"x20"

$63.00$65.00$68.00$75.00$81.00$88.00$99.00$111.00

• Steel fixed horizontal blades on 3/4" centers.

• Steel 1-1/4" flat border frame with screw holes.

• Countersunk screw holes and mounting screws.

• Blades are fixed at 35 degree deflection.

T70D FIXED BAR STYLE RETURN GRILLE, SURFACE MOUNT

T70D-LT FIXED BAR STYLERETURN GRILLE, LAY-IN

T70D

BAR STYLE FILTER GRILLE

STEEL BAR STYLE FILTER GRILLES FOR T-BAR

• Steel filter frame for 1" filter.• Hinged parallel to blades.• Screw driver latches.• White baked enamel finish.• Filters not included.

S90H-FF-TB

Catalog# Size List$W-10516W-12636

20"x20"44"x20"

$181.00$313.00

— 27 — 05/06 RG-1

PRODUCT DIMENSIONST70, T70D, T75, T75D


— 27 — 05/06 RG-1



Table o

f Co

nten

tsR

egisters &

Grilles

07/06

Steel R

eturn

Grilles &

Reg

isters


— 27 — 05/06 RG-1



— 27 — 05/06 RG-1



Table o

f Co

nten

tsR

egisters &

Grilles

07/06

Steel R

eturn

Grilles &

Reg

isters


— 27 — 05/06 RG-1



— 27 — 05/06 RG-1



Table o

f Co

nten

tsR

egisters &

Grilles

07/06

Steel R

eturn

Grilles &

Reg

isters


33

DOUBLE DEFLECTION BAR TYPE SUPPLY REGISTERS

Catalog# Size List$W-10686W-10687W-10688W-10689W-10690W-10691W-10692W-10693W-10694W-10695W-10696W-10697W-10698W-10699W-10700W-10701W-10702W-10703W-10704W-10705W-10706W-10707W-10708W-10709W-10710

6"x4"6"x6"8"x4"8"x6"8"x8"10"x4"10"x6"10"x8"10"x10"12"x4"12"x6"12"x8"12"x10"12"x12"14"x4"14"x6"14"x8"14"x10"14"x12"14"x14"16"x4"16"x6"16"x8"16"x10"16"x12"

$41.00$49.00$43.00$50.00$55.00$48.00$53.00$57.00$68.00$50.00$57.00$66.00$73.00$80.00$55.00$64.00$67.00$80.00$86.00$98.00$60.00$67.00$74.00$86.00$93.00

Catalog# Size List$W-10711W-10712W-10713W-10714W-10715W10716W-10717W-10718W-12607W-10719W-10720W-10721W-10722W-10723W-10724W-10725W-12608W-12609W-10726W-10727W-10728W-10729W-10730W-10731W-12610


$106.00$120.00$67.00$71.00$78.00$93.00$99.00$114.00$131.00$143.00$70.00$77.00$82.00$99.00$104.00$122.00$138.00$174.00$81.00$86.00$93.00$109.00$118.00$138.00$157.00

Catalog# Size List$W-12611W-12612W-10732W-10733W-10734W-10735W-10736W-10737W-10738W-12613W-12614W-12615W-12616W-12617W-12313W-12314W-12308W-12309W-12310W-12618W-12619W-12620W-12621W-12622

24"x18"24"x20"24"x24"30"x4"30"x6"30"x8"30"x10"30"x12"30"x14"30"x16"30"x18"30"x20"30"x24"30"x30"36"x6"36"x8"36"x10"36"x12"36"x14"36"x16"36"x18"36"x20"36"x24"36"x30"

$182.00$206.00$239.00$98.00$107.00$118.00$132.00$146.00$168.00$190.00$220.00$253.00$303.00$366.00$134.00$143.00$159.00$174.00$210.00$233.00$260.00$303.00$366.00$470.00

T64

• Steel adjustable vertical face bars and horizontalback bars on 3/4" center.

• 1-14" flat border frame with screw holes.• Countersunk screw holes and mounting

screws included.• Polyurethane foam gasket

included on frame.• Steel OBD damper included.• White baked enamel finish.

T64, DOUBLE DEFLECTION BAR TYPE SUPPLY GRILLE W/OBD

— 7 — 05/06 RG-1

PRODUCT DIMENSIONST54, T64


— 7 — 05/06 RG-1



Steel S

up

ply

Grilles &

Reg

isters

07/06


— 7 — 05/06 RG-1



— 7 — 05/06 RG-1



Steel S

up

ply

Grilles &

Reg

isters

07/06


STEEL AUXILIARY MOUNTING FRAME - Conversion From T-Bar to SurfaceMODEL SMF 24" x 24"

• Enables fast and efficient installation of a T-Bar diffuser or grille in a hard or plaster ceiling.

• Easy and simple installation.• Allows easy access to ceiling plenum space.• Wide flange provides a clean look.• White baked enamel finish.• Mounting hardware included.• Recommended ceiling opening is module size plus 1/4".

SMF

STEEL SUPPLY REGISTER - EXPOSED OR SIDEWALL SURFACE MOUNT



ALUMINUM EGG-CRATE RETURN GRILLE - Lay-In and Surface MountMODEL CRE5OO-LT AND CRE5OO-SF SURFACE MOUNT

• Aluminum cube core 1/2" x 1/2" x 1/2".• Aluminum 1-1/4" flat frame with screw holes.• T-bar units stocked with 24" x 24" panels.• Furnished with countersunk screw holes and

mounting screws for surface mount units.• White baked enamel finish.

CRE5OO-LT

CRE500-SF, EGG-CRATE RETURN GRILLE, SURFACE MOUNT


6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"20"x20"22"x22"46"x22"

$76.00$80.00$84.00$90.00$99.00$107.00$122.00$136.00$152.00$286.00

Catalog# Size List$W-10279W-10280W-10281W-10282W-10283W-10284W-10285W-10286W-10287W-10288W-10289

6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"20"x20"22"x22"24"x24"46"x22"

$22.00$26.00$30.00$36.00$45.00$54.00$68.00$82.00$98.00$119.00$231.00

CRE5OO-SF

SINGLE DEFLECTION MULTI-SHUTTER SUPPLY REGISTERSSTEEL SUPPLY REGISTER - EXPOSED OR SIDEWALL SURFACE MOUNT

• Steel adjustable vertical face bars.

• Multi-louver included.• White baked enamel finish.

Catalog# Size List$W-10746W-10747W-10748W-10749W-10750W-10751W-10752W-10753W-10754W-10755W-10756W-10757W-10758W-10759W-10760W-10761W-10762W-10763W-10764W-10765W-10766W-10767W-10768W-10769W-10770


$36.00$32.00$36.00$36.00$36.00$38.00$41.00$45.00$36.00$41.00$45.00$52.00$54.00$41.00$45.00$52.00$52.00$56.00$68.00$45.00$52.00$52.00$56.00$68.00$72.00

Catalog# Size List$W-10771W-10772W-10773W-10774W-10775W-10776W-10777W-10778W-10779W-10780W-10781W-10782W-10783W-10784W-10786W-10787W-10788W-10789W-10790W-10791W-12376W-12631W-12632W-12633W-12634W-12635W-12637

16"x16"18"x4"18"x6"18"x8"18"x10"18"x12"18"x14"18"x18"20"x4"20"x6"20"x8"20"x1020"x12"20"x14"24"x4"24"x6"24"x8"24"x10"24"x12"24"x14"24"x24"30"x4"30"x6"30"x8"30"x10"30"x12"30"x14"

$81.00$45.00$52.00$52.00$68.00$72.00$81.00$101.00$52.00$56.00$61.00$68.00$76.00$88.00$56.00$68.00$72.00$76.00$88.00$101.00$177.00$72.00$81.00$92.00$101.00$112.00$132.00

900V

CRE500-LT, EGG-CRATE RETURN GRILLE, LAY-IN

35

DOOR LOUVERS


12x1214x1416x1618x1218x1824x1224x1824x24

$345.00$387.00$411.00$384.00$430.00$440.00$493.00$497.00


12x1214x1416x1618x1218x1824x1224x1824x24

$150.00$161.00$183.00$169.00$200.00$200.00$249.00$315.00

1900A 700A

• #8 x 3/4 Phillips screw fasteners.• 1900A U.L. fire rated for use in fire doors

with up to a 1-1/2 hour rating• Free area: 50%-700A, 45%-1900A.

The 1900A is is constructed of 16 gauge steel and the 700A isconstructed of 18 gauge steel. Both have a bronze baked enamelfinish.

1900A, Steel, Fire-Rated


8x810x1012x1214x1416x1618x1820x2024x24

$54.00$58.00$62.00$70.00$79.00$87.00$103.00$163.00

Steel Louver, Flanged Frame

700A, Steel, Non-Rated

2" DEEP STEEL LOUVER

EXTERIOR 2" DEEP SL245-F BONDERIZED STEEL LOUVER

2" Steel louver has a bonderized 26 gauge steel frame and blades witha 45 degree blade profile. It features all spot welded construction.

STEEL FIRE RATED 1900A DOOR LOUVERSTEEL NON-RATED 700A DOOR LOUVER

AIR LOUVERS INC.6285 RANDOLPH STREETCITY OF COMMERCE, CA 90040(323) 726-8814 • FAX (323) 726-0338www.airlouvers.com

Distributor: ____________________________________________

Architect: ______________________________________________

Contractor: ____________________________________________

Project: _______________________________________________

Location: ______________________________________________

Date:__________________________________________________

MODEL 700A

MMooddeell 770000AA

SSppeecciiffiiccaattiioonnss

SSttaannddaarrdd FFeeaattuurreess::

OOppttiioonnss::

D4 800-766-0660 ALGC0809

AIR LOUVERS INC.6285 RANDOLPH STREETCITY OF COMMERCE, CA 90040(323) 726-8814 • FAX (323) 726-0338www.airlouvers.com

Distributor: ____________________________________________

Architect: ______________________________________________

Contractor: ____________________________________________

Project: _______________________________________________

Location: ______________________________________________

Date:__________________________________________________

MODEL 1900-A

MMooddeell 11990000--AA

SSppeecciiffiiccaattiioonnssSSttaannddaarrdd FFeeaattuurreess::

OOppttiioonnss::

FFiirree RRaattiinnggss ((wwiitthh UULL aanndd IITTSS ccllaassssiiffiiccaattiioonn mmaarrkkiinnggss))::

FFIIRREE RRAATTEEDD

D15ALGC0809 800-766-0660

SL245-F

• 45 degree blade profile.• Slim 2" deep profile.• 1-1/2" bonderized steel flange standard.• 1/4" mesh bird screen standard.• All units supplied 1/4" under nominal size.


SQUARE OPPOSED BLADE DAMPER - For Square Neck Diffusers and GrillesMODEL SOBD

• Gang-operated blades.• Damper operates with medium size flat

blade screwdriver.• Electrogalvanized steel construction.• Tools-free mounting• Includes mounting pins. Pins install by

finger pressure.


6"x6"8"x8"

10"x10"12"x12"14"x14"16"x16"18"x18"20"x20"22"x22"24"x24"

$17.00$19.00$26.00$29.00$35.00$44.00$53.00$61.00$69.00$79.00

SOBD

ROUND NECK OPPOSED BLADE DAMPERMODEL ROD

• Blades are gang-operated for quick adjustment.

• Adjustment is via flat-blade screwdriver from below the face of the diffuser.

• Duct mounted, not recommended for use in flexible ducts.


6"8"10"12"14"16"18"20"24"

$26.00$28.00$30.00$32.00$38.00$58.00$66.00$74.00$87.00

ROD

Standard finish is 6"-12" Millor 14"-30" Black enamel

ROUND OPPOSED BLADE DAMPER - For Round Neck Applications

Round Opposed Blade Damperssnap into position in diffusers without requiring the use of tools,for a more efficient installation.

• Blades are gang-operated via flat blade screwdriver from below.

• Steel construction.• Gray baked enamel finish.

Catalog# Size List$W-10272W-10273W-10274W-10275

6"8"10"12"

$27.00$28.00$30.00$32.00

RON

ROUND TO ROUND PANCAKE ADAPTORS

MODEL RTR Catalog# Size List$W-11470W-11471W-11472W-11473W-11474W-11475W-11476W-11477W-11478W-11479W-11480W-11481W-11482W-11483W-11484

6"x4"6"x5"8"x6"8"x7"10"x6"10"x7"10"x8"10"x9"12"x6"12"x7"12"x8"12"x9"12"x10"14"x12"16"x14"

$14.00$14.00$16.00$16.00$18.00$18.00$18.00$18.00$25.00$25.00$25.00$25.00$25.00$30.00$35.00

RTR

ROUND NECK ADAPTOR SQUARE TO ROUND

MODEL RNA

Catalog# Size List$W-11394W-11395W-11396W-11397W-11398W-11402W-11403W-11404W-11405W-11406W-11407W-11408W-11409W-11410W-11411W-11412W-11413W-11414W-11419W-11420W-11421W-11422W-11423W-12646W-11424W-11425W-11426

6"x6"x5"6"x6"x6"8"x8"x6"8"x8"x7"8"x8"x8"

10"x10"x6"10"x10"x7"10"x10"x8"10"x10"x9"10x10x1012"x12"x8"12"x12"x9"12"x12"x10"12"x12"x12"14"x14"x8"14"x14"x10"14"x14"x12"14"x14"x14"16"x16"x14"16"x16"x16"18"x18"x14"18"x18"x16"18"x18"x18"20"x20"x7"20"x20"x16"20"x20"x18"20"x20"x20"

$11.00$11.00$13.00$13.00$13.00$16.00$16.00$16.00$16.00$16.00$17.00$17.00$17.00$17.00$20.00$20.00$20.00$20.00$22.00$22.00$28.00$28.00$28.00$31.00$31.00$31.00$31.00

RNA


22"x22"x6"22"x22"x10"22"x22"x12"22"x22"x14"22"x22"x16"22"x22"x18"22"x22"x20"

$37.00$37.00$37.00$37.00$37.00$37.00$37.00

37

• Constructed from 26 gauge galvanized steel.

• Allows attachment of round flex orrigid duct to square neck of grilleor diffuser.

• Shipped loose for field installation.• Standard finish is Mill.

• Constructed from 26 gauge galvanized steel.

• Allows attachment of larger round flex or rigid duct to smaller square neck of grille or diffuser or vice versa.

• Shipped loose for field installation.• Standard finish is Mill.

STOCK CATALOG















continued success.



Commerce, CA 90040



Fax: 323-889-4825


Call Us at: 323-728-0004

STOCK CATALOG



323-728-0004858-583-0807

Mail to: POTTORFF - AIR PRODUCT SALES6501 Flotilla StreetCommerce, CA 90040

Fax to: 323-889-4825

Tax Exemption #: THANK YOU FOR YOUR ORDER!

BILL THIS ORDER TO:

Name:

Address:

City: State: Zip:

Phone:

E-mail:

METHOD OF PAYMENT(Please circle)

Check Money Order Credit Card

Card#

Exp. Date:

Signature:

SUBTOTAL:

TAX:

TOTAL:

VISA MASTERCARDAMER/EXPRESS DISCOVER

ORDER FORM

Date:

SHIP THIS ORDER TO: (if different than billing addess)

Name:

Address:

City: State: Zip:

Phone:

E-mail:

CatalogPage No:

Model # QuantityOrdered

Description of Product Priceper unit

TotalPrice

Customer Acct #:

PO #: LA Order Desk: (323) 728-0004SD Order Desk: (858) 583-0807

DIRECTORYLA Order Desk: (323) 728-0004SD Order Desk: (858) 583-0807

Inside Sales Personnel - Los Angeles

Jim Turner

Carlos Gonzalez

Adam De La Garza

Art Kowalski

Outside Sales Personnel - Los Angeles

Ruben Aguirre

Bob Bissell

Mike Lopez

Bud Ream

Paul Dedona

Outside Sales Personnel - San Diego

Manny Galicia

Project Management - Los Angeles

Robin Scilley

Patricia Kocsis

Estimating Department

Anthony Garcia

Jamil Ahmed

Management

Greg Scilley

Jim Turner

I

Operations Manager

Inside Sales Representative



OutsideSales Representative

Outside Sales Representative





Senior Project Manager

Project Purchasing

Project Estimator

Project Estimator

Vice President - General Manager

Operations Manager

Phone: 323-869-3843, Fax: [email protected]




Direct Line: 323-869-3855, Fax: [email protected], Cell: 213-494-3253Direct Line: 323-869-3856, Fax: [email protected], Cell: 213-494-3254Direct Line: 323-869-3868, Fax: [email protected], Cell: 213-494-6075

Direct Line: 323-869-3860, Fax: [email protected], Cell: 213-305-0944Main Line: 323-728-0004, Fax: [email protected], Cell: 323-833-0042

Direct Line: 858-583-0807, Fax: [email protected], Cell: 858-583-0807

Direct Line: 323-869-3872, Fax: [email protected]


Main Line: 323-728-0004, Fax: [email protected]

Main Line: 323-728-0004, Fax: [email protected]



STOCK CATALOG















continued success.



Commerce, CA 90040



Fax: 323-889-4825


Call Us at: 323-728-0004

STOCK CATALOG



323-728-0004858-583-0807

STOCK CATALOG















continued success.



Commerce, CA 90040



Fax: 323-889-4825


Call Us at: 323-728-0004

STOCK CATALOG



323-728-0004858-583-0807

Aps

Documents

Transcript of Aps