AP router manual

5
1 Wireless Router (Dynamic) + Wireless Card Network Parameter Protocol meet the IEEE 802.11n, IEEE 802.11b standards support USB1.1, USB2.0 devices support USB suspend mode in order to achieve low power consumption support the IEEE802.11 WEP encryption provide easy configuration, monitoring program wireless Roaming (Roaming) technology to ensure efficient wireless connections operating system support for Windows 2000/XP/XP64/7/Vista/Vista64 Use and Setup Network cable (LAN port) connect the wired network from many device such as wired router or the switch, with the state of dynamic IP (the IP is equipped automatic), using step of this portable wireless AP as follow: 1Shift the AP/WIFI switch at the AP on the side of Products, plug in the power (connect the computer with USB cable or with the adapter of 110V-240V), connect the wired routers or the switch to the AP with a network cable, all the indicator is light. Note: The power specifications for the 5V/500mA, if you are using does not match the power supply may result in product damage or no Internet access. 2When the wireless function of computer is opening, click the wireless icon in the right corner of the desktop , open the “look up the wireless network”, refresh the wireless network list, you will find the name of wireless network AP-Router-*******and double click and still connect then you can connect the wireless network succeed. At this moment there are 8 computers can connect the internet at the same time.

description

You can use a wireless network (WLAN) to share Internet access, files, printers, game consoles, and other devices among all the computers in your home.

Transcript of AP router manual

Page 1: AP router manual

1

Wireless Router (Dynamic) + Wireless Card

Network Parameter Protocol

meet the IEEE 802.11n, IEEE 802.11b standards

support USB1.1, USB2.0 devices

support USB suspend mode in order to achieve low power consumption

support the IEEE802.11 WEP encryption

provide easy configuration, monitoring program

wireless Roaming (Roaming) technology to ensure efficient wireless connections

operating system support for Windows 2000/XP/XP64/7/Vista/Vista64

Use and Setup

Network cable (LAN port) connect the wired network from many device such as

wired router or the switch, with the state of dynamic IP (the IP is equipped automatic),

using step of this portable wireless AP as follow:

1. Shift the AP/WIFI switch at the AP on the side of Products, plug in the power (connect

the computer with USB cable or with the adapter of 110V-240V), connect the wired

routers or the switch to the AP with a network cable, all the indicator is light. Note:

The power specifications for the 5V/500mA, if you are using does not match the

power supply may result in product damage or no Internet access.

2. When the wireless function of computer is opening, click the wireless icon in the right

corner of the desktop , open the “look up the wireless network”, refresh the

wireless network list, you will find the name of wireless network “AP-Router-*******”

and double click and still connect then you can connect the wireless network succeed.

At this moment there are 8 computers can connect the internet at the same time.

Page 2: AP router manual

2

Page 3: AP router manual

3

Network cable (LAN port) connect the wired network such as MODEN LAN, complete

these two steps above, at this time the wireless network is not really success because you

still can’t get online, there is another step, click the “broadband connection” on the

desktop.

Page 4: AP router manual

4

Input the account name and secret then click connect then you can go to the

internet. At this state there is only computer which can dial the broadband

connection to connect the internet.

Page 5: AP router manual

5

Safety:

The safety of wireless signal, to ensure nobody can steal your wireless signal, we can

modify the password with the website “192.168.1.225”, connect the AP successfully, and

enter the website, and you can input a new password with 13bits and affirm again, apply

and then modify successful. If forget the password, press key “REST” 5 seconds, the

password is clear.

USB wireless card

Shift the AP/WIFI switch on the WIFI, connect the AP and computer with an USB cable,

setup the driver of the wireless card in the CD, enter the interface of setup and choose

“only setup the driver”. if setup success, the wireless card can use normal.