ANTI-SLIP

CRYSTAL

SATINATO

MICRO

Representing

INNOVATIVE PRODUCTION TECHNOLOGIES

The porcelain industry is constantly developing, offering us, manufacturers, new material to improve the product quality.

ANTI-SLIP ASR / AMR

CRYSTAL PGR Super

SATINATO SGR / SLR

MICRO Rm

We represent 4 innovations of the porcelain industry thathave been successfully tested and are being prepared for

release at our enterprise in the near future

Structural and matte surface with anti-slip effect

Super polished surface

Satin surface for glazed and technical porcelain

Finest edge processing

These technologies are directed to create the PROFESSIONAL-QUALITY

products, as part of the “PRO” program implemented at our enterprise. Launched since September 2018

ANTI-SLIP

АSRАМR МАТTANTI-SLIP

TECHNOLOGY

The anti-slip effect is achieved by applying special particles to the porcelain surface prior kiln firing.

Non-slip facing material has a wide range of application.Most tiles are used in-door or under cover.

We offer porcelain stoneware that is ideal for open spaces

Our surfaces identification:

STRUCTURALANTI-SLIP

*Any article of Product Program can be made with this surface

MOST OFTEN ANTI-SLIP PORCELAIN TILES ARE NEEDED FOR FINISHING:

Water and SPA areas

Bathrooms and walk in showers.

Kitchens.

Hallways, corridors, balconies in the apartments and houses

Outdoor territories, stairwells, ramps and patios.

Hospitals and health resorts.

Catering facilities

Shopping and utility areas in malls.

Office premises.

Hotels and entertainment complexes.

This finishing is used in any other areas, wherever it is necessary to observe increased safety measures or there is an INCREASED RISK OF INJURIES

MR

АМR

АМR АМR

WHAT WAS ACHIEVED:Slip resistance – R12 (Test method DIN 51130)The surface does not shine, is matteThe surface is washed with waterThe surface keeps its anti-slip properties, even being wetThe surface has high abrasion resistance – means it is long-livedThe sprinkles only slightly change the tile design

Anti-slip test GRANULE (anti-slip)

Anti-slip test, being wet, GRANULE (anti-slip)

The lab abrasion resistance test at 2100 rpm PROTECTION

The lab abrasion resistance test at 18000 rpm GRANULE(anti-slip)

CRYSTAL

PGR Super

TECHNOLOGY

Glazed porcelain with a polished surface is widely represented on the market.But polished glaze had a significant disadvantage – after polishing the surface used to get

dirty and required special protection with chemical agents which did not last for long. Today we offer a new generation of glazes.

Our surfaces identification:

PGRPGR

PGR Super PGR Super

CRYSTAL-A NEW GENERATION OF POLISHING GLAZES

Has a special structure that does not leave pores after polishing, which prevents the ingress of dirt.

Has a high rate of light reflection after polishing, which makes the design looks more deep and beautiful.

The glazes are transparent, which allows high-quality polishing of dark designs.

SATINATOTECHNOLOGY

Among architects and exacting developers a new type of polished surface “Satinato” is gaining popularity.

This effect is achieved by polishing the glaze and technical porcelain stoneware with special abrasives.

This type of processing is usually used in Premium segment interiors.

SLR

SLR

SGR SLR

PLR

WHAT ATTRACTIVE ABOUT PORCELAIN STONEWARE WITH SATIN FINISHHas a soft, subdued brilliance and depth

Soft and velvety to the touch (fabric effect)

The interior revetted with “satin” acquires a unique style and looks expensive.

Our surfaces identification: Satin surface of technical porcelain Satin surface of glazed porcelain

MICRO

Rm

TECHNOLOGY

Bevelling – processing the outer side of the sharp edge, which is formed after porcelain tiles cutting (rectification).

Processing is done to prevent cuts during operation.

Standard beveling is 1-1,5 mm. wide (taking into account the allowed plate deformation, its width is not the same along the length).

Our surfaces identification for Micro bevelling is:

SR SR

SRm SRm

NEW MICRO BEVELING TECHNOLOGY “MICRO” ALLOWS:

Obtain the beveling thickness of 0,5 mm, while keeping all the protective properties.

Maintain the same thickness along the entire plate length.

Reduce joint sizes during plates' installation.