Anodes, engine bellows - OSCULATI

43

498

43

An

od

es

, en

gin

e b

ello

ws

Anodes, engine bellowsBELLOWS - ANODES

43Anodes, engine bellowsAnodes, engine bellows

for VOLVO engines

Code Original reference Trasmission43.950.01 875256-0 Old type without the edge43.950.04 876294-0 New type with edge

*All VOLVO legs 100 B/S excluded.

43.932.12-13

Code Original reference

Exhaustlength mm

Foot ote

43.950.02 876631-3 160200/280/DPX/

DP-5/SXwithout flap, interchangable

with 43.950.03

43.950.03 876631-3 150200/250/270/280DP/290/

DPX-

43.950.05 876633-9 150280/280T/

280PTwith flap

43.950.06 3850426 DP-S/SX -43.932.12 858955 AQ 31-4143.932.13 860396 KAD42

Ring box flying cautchouc

Codice Original reference43.932.25 OE 80419043.932.26 OE 813967

43.932.60 Transmission bellows (orig. ref. 3854127)

Double elbow

Black rubber hose for cooling water intake for Volvo/Penta, universal model, includes clamps.

Code Original reference Model43.951.00 875822-9 Universal Clamps

Gaskets

Made of rubber, boat sealing for Volvo Sail Drive legs.

Code Original reference43.952.00 854932

Gruppo43.fm Page 498 Saturday, January 19, 2008 11:00 AM

20081958 43

499

43

An

od

es

, en

gin

e b

ello

ws

For MERCRUISER engines

Bellows

Code Original reference Description43.932.01 60932A4 sterndrive bellows43.932.07 816431A1 transmission Alpha I Generation II bellows43.932.08 36223A2 transmission Mercruiser I drive 1A-1B-1C bellows43.932.09 86840A3 transmission Bravo I/II/III bellows

43.932.10

43.932.11

Exhaust bellows

Code Model Original reference43.932.10 140/165 HP -43.932.11 170/488 HP 70981A3

Bellows

Code Description Original reference43.932.20 Command cable Stern Drive 74639

Bellows

Code Description Original reference43.932.00 Exhaust Stern Drive 18654A1

43.932.03 43.932.04

Socket joint

Code Descrizione Original reference43.932.03 Drain bellows Stern Drive 78458A143.932.04 Drain bellows low 4 inches 32-14358T

43.932.05 43.050.10

Exhaust bellows

Code Descrizione Original reference43.932.05 Drain high 4 inches collar 32-44348T43.932.06 Drain low 3 inches collar 32-90949T

43.050.10 Complete seal kit+ tight ring + 3 O-ring forMercruiser, Stern, Drive Alpha 1

27-94996A1

For OMC COBRA engines

Code Description Original reference43.932.60 Transmission bellows 987467-1/98397343.932.61 Collar 912374-1 - 5,7/7,5 liters up to 1986


43

500

43

An

od

es

, en

gin

e b

ello

ws

For outboard engines OMC / JOHNSON / EVINRUDE

43.300.00 Anode designed for mounting ontransom size 193x43x16mm (ref. 976669)

43.311.00 Anode for intermediate housing of SX-drive engines 78-85, size 177x80x40mm (ref.982277/982438).

43.309.00 Anode for transom of all OMC Cobra86-89 (ref. 984547/983952) size 95x110x30mm.

43.310.00 Anodes for stern drive units size81x118x40mm (ref. 980756).

43.320.00 Front anode for gear boxes of SX-drive engines and OMC Cobra 84-86 + stern driveunits Cobra (ref. 983494)

43.317.00 Legs for all outboard engines V4, V6and all OMC Cobra, except for model 460, 86-95(ref. 436745/393023/983315) size 38x40x24mm.

43.314.00 Anode for outboard engines Evinrude/Johnson, size 46x34x23 mm.

43.308.00 Front anode for gear boxes of all OMCCobra 97-93 ’clutch + Volvo leg Duo Prop (ref.984513/3853818.

43.316.40 From 40 to V8, from 88 to 91 (exceptfor 40-50 from 89) + all OMC Cobra (ref. 431708).

43.322.00 Anode OMC King Cobra 1990/93 (ref.987067).

43.322.03 Back anode for gear boxes OMCCobra 87-89 (ref. 397768).

43.322.04 Anode for transoms of all OMC Cobra90-93 and OMC King Cobra 90-95 (ref. 986158/3853930) size 91x37x43 mm.

43.316.30 Outboard anode from 3 cylinders up toV6 1991 and later versions (ref. 433580).

43.315.20 Outboard anode also suitable forHonda outboard engines (ref. 173029/123009).

43.316.20 Outboard anodes 737 OMC (ref.398873).

43.316.00 Anode for outboard engines 4 1/2, 6,7 1/2, 8 from 79 to 84 + 4, 6, 8 from 85 to 90.

43.316.10 Double zinc for Johnson/Evinrude 20/25/35 from 91 to now, original reference 434029.

43.318.00 Anode for outboard engines 50-75 Hpfrom 82 to 84 (except for working versions 55 and65) (ref. 392461/392462).


20081958 43

501

43

An

od

es

, en

gin

e b

ello

ws

43.319.00 Anode for outboard engines 50/75 HP(ref. 392461).

43.306.00 Anode for 3/4 cyl 40/140 Hp + from 3to V8, from 85-90 + manual overturning modelsfrom 91 (ref. 398331/433458, size 56x43x23mm).

43.315.30 Anode plate for 9.9-15 Hp 2 strokes +8/9,9/15 4 strokes (ref. 3386357).

43.903.20 Leg anode plate for 40/50 HP 4strokes.

43.272.86 Anode fin for 40/50 HP 4 stokes 43.272.85 Anode fin for 60/70 HP 4 strokes

43.253.00 Anode fin for 225 HP 4 strokes. 43.640.04 Anode rod for 60/70/200/225 HP 4 strokes.

43.274.00 Anode plate for 40/50 HP 4 strokes (reference 327606). 43.272.20 Anode for 5 HP 4 strokes.

Anodes for outboard engines MERCURY/MARINER AND STERN DRIVE UNITS MERCRUISER

43.433.03 Anode for Mercury 4/5/6 HP (ref.875208).

43.172.64 Anode leg for 50/55/60 HP outboardengines, also for Mariner with the same power(ref. 17264).

43.806.18 Propeller shaft bracket anodeMercruiser Bravo I (ref. 806188A).

43.825.43 Anode for 9.9 HP 4 stroke outboardengine, size 15x13 mm (ref. 825435).

43.252.71 Trim for outboard engines 25/30/40HP, 2 and 4 strokes (ref. 825271).

43.421.00 Anode fin for outboard engines 20 HP(ref. 47820A1)


43

502

43

An

od

es

, en

gin

e b

ello

ws

43.426.00 Anode fin for outboard engines 18/25HP (ref. 94286).

43.426.10 Anode for 18/20/25 HP, also forMariner 20/25, Force 25, Yamaha 4T 50 HP (ref.98432).

43.426.20 Anode for Mercury/Mercruiser legswith stainless steel propeller (ref. 463.99A).

43.433.00 Anode for outboard engines (ref.09411)

43.433.01 Anode for outboard engines, alsosuitable for Mariner 6/8/9,5/15 HP (ref. 42121).

43.433.02 Anode for outboard engines 4,5/7,5/9,8 HP built after 1987 (ref. 85824A3).

43.435.10 Inboard plate Alpha One (ref.815933A1/821629A1).

43.434.10 Suitable for engine rods 2 and 4strokes 30 to 200 HP and Superamerica, fittedwith 4 holes (ref. 818298A1).

43.435.20 Bravo anode plate (ref. 821630A/C).

43.435.00 Anode for stern drive units Mercruiser(ref. 821631A-1).

43.259.03 Anode FP 2HP (ref. 810945M) 43.434.00 Anode for outboard engines Mercury(ref. 71320A3).

43.430.00 Rectangular plate anode suited forstern drive units, may also be use for otherpurposes; screw mounting, size 65x65x10 mm(ref. 34762A1).

43.432.00 Collar Alpha (ref. 806105A). 43.423.00 Flat anode fin Alpha/Bravo FP 35/300HP (ref. 76214A2).

43.424.00 Anode leag Bravo/Blackhawk (ref.806190A).

43.424.01 Anode leg Mercruiser/Alpha (ref.806189A).

43.424.03 Anode leg Mercruiser/Blackhawk (ref.806187-C).

43.424.05 Anodes for outboard enginesMercury from 40 HP or higher, 2 and 4strokes (ref. 826134).

43.822.15 Anode fin 25/50 HP, 2 and 4strokes (ref. 822157-T2)

Gruppo43.fm 02 Saturday, January 19, 2008 11:00 AM

20081958 43

503

43

An

od

es

, en

gin

e b

ello

ws

43.227.77 Anode fin 35/225 HPMercruiser (ref. 822777)

43.640.04 Anode plate 25/40 HP (ref.823912002)

Anode for propeller nut

43.966.00 Anode for propeller nut of Mercury outboard up to 30/50 HP, (rif. orig. 809660)

43.966.20 Anode for propeller nut outboard from 50/225 and inboard from 80 to 160 HP

43.966.40 Anode for propeller nut outboard from 70 to 275 HP and inboard from 120 to 485 HP+ Alpha + Bravo I (rif. orig. 809664)

43.967.00 Anode for propeller nut in-outboard MCM III, 215 H-E, II TR, Bravo IIo (rif. orig.809670)

43.823.91 Washer for outboard leg 4/6 HP, 2 and 4 stroke 20 x 7.4 mm

43.239.13 Washer for outboard leg 2,2/2,5/3/3,3 HP 23,5 x 7,6 mm (ref. N. 823913) Mercury/Marine

43.420.00 Fin anode 2 and 4 srtoke deer 40 to 225 HP, thread 7/16" (ref. N. 31640)

43.425.00 Fin anode for stern driver (Rif. orig. 34127)

43.442.00 Base support anode for stern drive, thread 12 x 1.75

43.442.01 Base support anode for stern drive, (ref. N. 55989A), thread 1 x 13 (120/160 HP) (ref.N. 55989A3), 120 HP Alpha-ONE 55

Anodes for outboard engines YAMAHA/MARINER

43.253.02 Fin Yamaha 25/50 HP 4 strokes (ref.67C-45371-00).

43.256.00 Fin Ø size 94 mm suited for Mariner20/50 HP + Yamaha 20/50 HP (ref. 664-4537101).

43.260.00 Anode washer Ø size 24x7 mm (alsosuitable for Honda 3.5 HP) (ref. 677-4525100).

43.262.00 Anode washer for 9.9/15 HP, Ø size45 mm (ref. 6E8-4225100).

43.252.00 Anode for 115/220 HP and higherpower (ref. 6EC-45251-00).

43.264.00 Anode for outboard engines 40/50 HP4 strokes (ref. 63D-4525100).

43.188.52 Anodes for 4/5/6 HP (also for Mariner)(ref. 6EO-4525112).

43.254.00 Anode 100/300 HP (ref. 6G5-4525102).

43.263.00 Anode for outboard engines F8A/B9,9D/F9,9B/15D (ref. 6E8-45251-02).


43

504

43

An

od

es

, en

gin

e b

ello

ws

43.254.10 Anode rod for Yamaha and Mariner40, size 205 mm for 25/100HP, (ref. 6H1-4525103/01).

43.426.10 Anode leg 50 HP 4 strokes. 43.260.02 Anode leg Yamaha 30/60 HP (ref.67C-45251-00).

43.260.03 Anode bridge Yamaha 80/60 HP 4strokes (ref. 65W-45251-00).

43.260.04 Anode leg Yamaha 6/8 HP 4 strokes(ref. 68T-45251-00).

43.266.00 Anode 9.9 HP (ref. 6G8-4525100).

43.267.00 Anode 8/30 HP (ref. 61N-4525101). 43.268.00 Anode 40/50 HP (ref. 63D-4525110). 43.269.00 Anode for 50/100 HP 4 strokes (ref.67F-4537100).

43.259.00 Anode plate for 6/8 HP (ref. 6G1-45251-03).

43.259.01 Anode plate for 6C/6D/8C (Ref. 6G1-45251-02-6N0-G-5251-00).

43.259.03 Anode plate for 2B/3A/4B/F4A/5C(ref. 6L5-45251-02).

43.260.01 Anode washer for 25/70 HP size24x14 mm (ref. 663-45251-00).

43.270.00 Anode 150/225, 2 strokes + 150 4strokes (ref. 6J9-4537101).

43.270.50 Find 9.9/15 HP 4 strokes (ref. 66M-4537100).

43.424.05 Anode 40/70 HP 4 strokes. 43.252.90 Directional Yamaha fiin 60/225 HP(ref. 6E5-45371-10).

43.252.71 Anode rod 30/40 HP.

43.252.95 Directional Yamaha fin 225/250 HP(ref. 69L-45371-00).

43.260.07 Anode cylinder Yamaha 80/100 HP(ref. 67F-11325-00).

43.260.09 Anode cylinder Yamaha 40/200 HP(ref. 62Y-11325-00).


20081958 43

505

43

An

od

es

, en

gin

e b

ello

ws

43.260.11 Anode cylinder Yamaha 25/90 HP(ref. 688-11325-00).

43.260.12 Anode cylinder Yamaha 2,5/9,9 HP(ref. 6G8-11325-00).

43.260.13 Anode cylinder Yamaha 100/225 HP(ref. 6E5-11325-00).

43.260.14 Anode cylinder Yamaha 20/25 HP (ref. 6J8-11325-00).

43.260.15 Anode cylinder Yamaha 9.9HP (ref. 66M-11325-00).

43.255.00 Short fin anode for Mariner 40/50 HP and Yamaha 40/55 HP (thread in mm)(rif. orig. 679-4537100)

43.255.01 Short fin for Mariner 40/60HP later 1991 and for Yamaha 40/55 HP (thread 7/16o)

43.257.00 Long fin Mariner

43.258.00 Fin 25/200 HP (orig. ref. 688.45371.02)

43.270.61 Fin 150/200 HP Ø mm 150/200 (orig. ref. 6K1-4537102)

43.253.00 Fin anode for 100/225 HP and over, Ø 91 mm (ref. N. 6E5-45371-01)

43.270.60 Fin anode for 150/200 HP, Ø 97 mm (ref. N. 6K1-4537100)

43.253.01 Fin anode for 115/130/140 HP, Ø 91 mm (ref. N. 6L6-4537100)

Anodes for outboard engines SUZUKI

43.261.00 Anode washer Ø size 22x10 mm forengines F.B. Suzuki (ref. 55.321-93.142 - 55321-87J00).

43.903.20 Anode plate 40/115 2 strokes - 150/300 HP 4 strokes (ref. 55.320-95.310).

43.272.10 Fin for Suzuki engines without cooling55/85 HP, Ø size 60 mm (ref. 94.400), may alsobe replaced with 43.272.70.

43.272.80 Fin for Suzuki engines without cooling150/175/200/225 HP 2 strokes + 60/70 HP 4strokes Ø size 88 mm (ref. 55125-87D00).

43.272.30 Clamp and terminal plate for 55/75/85/90/150/200/225 HP (ref. 41.810-87D00).

43.272.20 Anode plate 4/6 HP (ref. 55.320-98.600).


43

506

43

An

od

es

, en

gin

e b

ello

ws

43.272.40 Plate anode for 8/9.9/15 HP 2 strokes+ 9.9/15 4 strokes (ref. 53321-93900).

43.272.85 Fin for 60/140 HP 2/4 strokes (ref.55125-87E01).

43.272.86 Fin for 55/65/75/85 HP + 40/70 4strokes (ref. 55125-95500).

43.903.30 Anode plate for 55/65/75/85HP (ref. 55320-98400).

43.640.04 Anode rod for 60/250 HP 4strokes (ref. 55320-94900).

43.903.32 Anode plate for Suzuki 4strokes 60/140 HP (ref. 55321-90J01).

43.274.00 Anode plate for all model (ref.55300-95500).

43.272.00 Fin with cooling 20/25/30 HP 2/3 cylinder, Ø mm 70 (orig. ref. 55125-96302-96310)

43.272.70 Fin cooling for engine Suzuki 55/65 HP, Ø mm 60 (rif. orig. 55125-95301)

Anodes for VOLVO STERN DRIVE UNITS

43.500.00 TRIM anode for legs 270 (ref.832934).

43.540.00 Anode manifold size 12x52 mm (ref.800476).

43.540.01 Heat exchanger anode, size 16x30mm (ref. 823661).

43.271.40 Truncated anode with screws forVolvo engines, male/female, 7/16’’ screws, sizes16x42mm (ref. 838929).

43.554.11 Duo Prop leg (also Cobra OMC leg)(ref. 3855411-2).

43.554.12 Splash-proof Duo Prop Volvo anode(ref. 3857857).

43.554.13 Volvo DP/DPR Drive anode (ref.3863206/3588746).

43.541.30 Duo Prop leg (also Cobra OMC leg)(ref. 3854130).

43.547.00 Anode fitted with brass plug, Ø size25x30 mm, suitable for diesel engines.

43.550.00 Universal rod for anode leg type 250/270/280 size 187 mm (ref. 832598-7).

43.549.05 DPX legs (ref. 873395-8). 43.531.00 Anode for Penta Duo Prop Volvo (ref.875821-1).


20081958 43

507

43

An

od

es

, en

gin

e b

ello

ws

43.555.00 Twin anodes for foldable propellers(110S/120S/1205B/S120C) (ref. 852018-1).

43.553.00 DPX anode leg (ref. 872675/872793-5).

43.553.01 Trapezoid anode for Volvo (ref.872175/876638-8).

43.535.00 Anode for Sail Drive propeller leg, 3piece series, (ref. 3858399).

43.554.15 Volvo DUOPROP anode (ref.3588745/3588768/3588770/3588746/3588748/3588750).

43.226.46 Ring for Sail Drive Volvo leg withpropeller Max-PROP, internal Ø size 46 mm.

43.510.00 Collar anode for leg 100 (ref n. 875810-4)



43.528.00 Collar anode for leg 280/290 (ref n. 875815)

43.529.00 Collar anode Sail Drive. Ø 97 mm, height 28 mm Sail Drive 120 (ref n. 876286)

43.530.00 Collar anode Sail Drive. Ø 105 mm, height 43 mm Sea Drive 110 (ref n. 878512)

43.513.00 Zinc ogive for propeller Ø 22/25/30 (ref n. 833913-7)

43.514.00 Zinc ogive for propeller Ø 40/45 (ref n. 828140-4)

43.551.00 Base anode for Duo Prop foot (ref n. 852835-8)

43.551.01 Base anode for Duo Prop foot (ref n. 872139-1)

Anodes for foldable propellers MAX-PROP

43.224.38 Propeller cone inside Ø 38 mm, for shaft Ø 25/28 mm



43.226.46 Ring for Sail Drive Volvo leg with propeller Max-PROP, internal Ø size 46 mm.


43

508

43

An

od

es

, en

gin

e b

ello

ws

Anodes for BMW engines STERN DRIVE UNITS

43.131.00 Collar anode size 13x52mm. 43.132.00 Fin model 1988. 43.133.00 Anode collar size 13x50mm.

Anodes for YANMAR engines

43.542.00 Circular anode, Ø size 20 mm L43. 43.543.00 Circular anode, Ø size 20 mm L55. 43.544.00 Washer anode, Ø 69 x 12 mm

43.544.01 Anode washer diameter size 77 mm. 43.544.02 Fin 43.544.03 Sail-Drive anode collar (ref.19642002652).

Anodes for engines RENAULT MARINE CUMMINS - CATERPILLAR - MERCRUISER

43.560.00 Anode, cooling plug, thread 18x1,50, Ø mm 15x35



43.100.00 Shaft nut size 22/25 mm, thread size 16x2,0.

Code Length mm Thread ’43.228.00 12x52 3/843.228.10 12x40 3/843.228.30 9,5x70 1/443.228.40 30x73 3/443.228.50 30x82 3/443.228.70 16x64 3/843.228.80 16x77 3/843.228.90 16x90 3/8

Anodes for SELVA outboard engines

43.020.00 Universal fin anode fitted on a roundbase

43.025.00 Fin fitted onto a rectangular plate (15HP).

43.030.00 Rectangular flat anode plate.


20081958 43

509

43

An

od

es

, en

gin

e b

ello

ws

43.030.01 Curved rectangular plate. 43.256.00 Fin for 25/40/50/60 HP 4 strokes. 43.263.00 Anode for 9.9/15 HP 4 strokes.

43.259.03 Anode 4 HP 4 strokes. 43.264.00 Anode for outboard engines 40/50 HP4 strokes.

43.254.10 Anode rod fr Selva 25/100HP.

43.260.04 Anode leg Selva 6/8 HP 4 strokes 43.260.07 Anode cylinder Yamaha 80/100 HPSelva (ref. 67F-11325-00).

43.270.50 Fin 9.9/15 HP 4 strokes Selva (ref.66M-4537100).

43.267.00 Anode 8/30 HP Selva (ref. 61N-4525101).

43.266.00 Anode 9.9 HP Selva (ref. 6G8-4525100).

43.031.00 "U" shape leg for 40/60 HP.

43.032.00 "U" shape leg for 70/100 HP. 43.033.00 Universal rod for 40/HP and higher, 2strokes.

43.254.00 Anode support 115 HP 4 strokes.

43.269.00 Anode fin 100 HP 4 strokes 43.253.00 Fin 115 HP 4 strokes

43.260.03 Anode support 4 strokes 43.260.02 Anode leg 40/50/60 HP 4strokes


43

510

43

An

od

es

, en

gin

e b

ello

ws

Anode for HONDA outboard engines

43.420.00 Fin (ref. N. 41107- ZW1-003ZA) 43.291.00 Fin for HP 25/35/45/50 (ref. 06412-ZV5-000).

43.315.20 Plate 2/5/8/8,9/15 HP (ref. 41106-ZV4-650)

43.290.00 Anode plate for 35/45/50 HP (ref.06411-ZV5000).

43.424.07 Anode plate for 75/225 HP (ref.06411-ZW1-000).

43.292.00 Zinc anode for Honda 8/20 HP (ref.41106-ZW9-000).

43.424.05 Plate anode for 75/225 HP (ref. N. 41109-ZW1-1003) (foot AT)

43.293.00 Plate anode for 75/225 HP (ref. N. 41109-ZW-1-B000) 36x72 mm

Anodes for ’TOHATSU" outboard engines

43.640.01 Fin for 35/40 HP, Ø size 50 mm (ref.348-60217-0).

43.640.02 Fin for 25/30 HP and 40/50 HP Mega,Ø size 59.5 mm (ref. 3C8-60217-1).

43.640.03 Fin for 60/70/140 HP, Ø size 77 mm(ref. 3B7-60217-0).

43.640.04 Anode rod, 40/60/140 HP, Ø190x40 (rif. orig. 3C7- 60218-1)

43.640.05 Small anode for 9.9/15/18 HP(ref. 3B7-60218-1).

Anodes for various engines

43.600.05 Convex anode plate size 80x55 mm,wheelbase 50 m, weight 180 grams.

43.610.00 Universal anode for engine brands:Chrysler, Evinrude, Johnson or any outboardengine; for mounting on an anti-cavitation plate.

43.900.00 Rectangular plate anode size160x70x15 mm, weight 900 grams.

43.703.00 Plate anode, size 100x50x8 mm,weight 300 grams.

43.910.01 Bolting anode weight 3 kg, wheelbase200 mm (Z3).

43.901.00 Circular Vetus anode for mountingwith just one bolt, Ø size 80x45h.


20081958 43

511

43

An

od

es

, en

gin

e b

ello

ws

Threaded anode for cooling system:

43.541.00 from mm 10x40, thread 3/8"

43.545.00 from mm 20x80, thread 3/4"

43.548.00 from mm 16x50, thread 1/2"

43.701.00 Soap shape anode, weight 300 g

43.702.00 Soap shape anode, weight 500 g

43.599.00

43.600.00

Standard rose anode for rudders

Sold in pairs, fitted with bolt and screw nut.

Code Ø mm Weigth pair g Type43.599.00 50 200 heavy43.600.00 70 300 light43.600.01 70 450 heavy43.605.00 90 500 light43.605.01 90 890 heavy43.620.00 130 1350 heavy43.630.00 190 6140 heavy

Sold in pair

Rectangular anodes with insert

Made of galvanized iron, for screw mounting or for welding; hydrodynamic shape.

Code length. x width. x High mm Weight kg43.907.01 90x35x25 0,2543.907.02 125x46x23 0,5043.907.03 145x62x28 1,0443.907.05 150x70x25 2,0643.907.06 200x100x20 2,9043.907.07 200x100x55 5,20

Welding anodes

tapered, can be pierced and bolted.

Code Version A B C D

43.904.00 ZP - 0 203 120 40 25 0,543.905.00 ZP - 1 260 178 60 30 1,243.910.00 ZP - 3 340 231 76 30 243.911.00 ZP - 2 430 280 98 48 543.905.01 ZF - 2 250 120 80 45 2

Heavy-duty rose anode, for bolt mounting.

Code Ø mm

43.915.00 110 69043.915.01 120 100043.915.02 125 108043.915.03 140 1570

Anode washer

43.201.00 kg. 0,520, Ø mm 57, Castoldi

43.202.00 kg. 1,500, Ø mm 83, Castoldi

43.203.00 with nut M10 from mm 30, Ø mm 22, Castoldi

Oval Vetus type anode for mounting with two bolts

Codemm

Hole tohole mm

43.902.00 150x60x25 80 0,90043.902.01 250x65x30 140 2,40043.902.02 350x70x35 200 4,400


43

512

43

An

od

es

, en

gin

e b

ello

ws

Bolting anodes

Fitted with rubber plate.

Code mm Hole to hole mm

43.920.01 1,2 150x70x20 7443.920.02 1,3 148x70x26 7443.920.03 2,5 200x100x20 11043.920.04 3,8 200x100x30 11043.920.06 6,2 300x148x21 160

Axis line Radice anode

Code Ø mm Code Ø mm Code Ø mm43.225.00 25 43.235.00 35 43.245.00 4543.230.00 30 43.240.00 40 43.250.00 50

Ogive shaft anodes with standard thread

Fitted with interchangeable zinc plate.

Code Axis Ø mm Thread mm Spare zinc43.122.20 20 16x1,5 43.123.2043.122.25 25 18x1,5 43.123.2543.122.30 30 20x1,5 43.123.3043.122.35 35 24x2,0 43.123.3543.122.40 40 26x2,0 43.123.4043.122.45 45 30x2,0 43.123.4543.122.50 50 36x3,0 43.123.50

Propeller anodes, new Radice type from 1996

Fitted with inner brass hexagon with zinc anode.

anode with nut only anode Per axis mm Thread mm43.251.01 43.265.01 20/22/25 18x1,543.251.02 43.265.02 30 20x1,543.251.03 43.265.03 35 24x243.251.04 43.265.04 40 24x243.251.05 43.265.05 45 33x243.251.06 43.265.06 50 36x343.251.07 43.265.07 60 45x3

.Brass ogive for propeller shaft, standard thread with interchangeable zinc anode.

Code Axis Ø mm Thread mm Spare zinc43.121.20 20 16x1,5 43.120.0043.121.25 25 18x1,5 43.120.0043.121.30 30 20x1,50 43.120.0043.121.35 35 24x2,00 43.150.0043.121.40 40 26x2,00 43.150.0043.121.45 45 30x2,00 43.150.00

43.005.00 Anchoring anode, weight 2 kilos

Olive shape propeller shaft

Fitted with stainless steel pins and nuts.

Code Hole mm Code Hole mm Code Hole mm43.800.19 20,0 43.800.35 35,0 43.800.55 55,043.800.22 22,0 43.800.38 38,0 43.800.60 60,043.800.25 25,0 43.800.40 31,8 43.800.65 65,043.800.30 30,0 43.800.45 45,0 43.800.70 70,043.800.32 31,8 43.800.50 50,0

Low olive shapes for propeller shafts

For sail boats with confine spaces, fitted with stainless steel pins and nuts.

Code Hole mm Thickness mm Code Hole mm Thickness mm43.801.20 20 14 43.801.35 35 2043.801.22 22 14 43.801.40 40 2043.801.25 25 14 43.801.45 45 3043.801.30 30 15 43.801.50 50 30


Anodes, engine bellows - OSCULATI

Documents

Transcript of Anodes, engine bellows - OSCULATI