Ankersmid peliter cooler datasheet 0
Transcript of Ankersmid peliter cooler datasheet 0
Peltier Cooler Gas Sample Cooler
Through lowering the dew point of humid gas, the Ankersmid Peltier Cooler is able to reduce the risk of condensation occurring in the analyser
The Peltier Cooler is equipped with an adjustable dew point stabiliser.
The stabiliser is set at 4oC as standard with the option to adjust the
value to between 1 and 15oC at any time.
Digitally Controlled The digital controlled cooler has many control and warning features
like programmable alarms, mA-output, digital inputs and Modbus or
RS485 communication. Using smart technology the alarm status of the
cooler changes when the temperature deviates ± 3 °C from a set point
Humidifies Calibration Gases The peltier cooler is equipped with a silicon coated (glass) heat exchanger,
as standard with the added availability of PFA coating as an alternative.
Using a special liquid inlet, the Peltier Cooler humidifies calibration gases
to avoid volumetric errors.
KEYBENEFITS• Removable heat-exchanger with
unique design
• Humidified heat-exchanger for
calibration cross-interference
compensation
• Digital controlled high stable outlet
dew point ± 0,1°C
• Compact design
• Digitally controlled
Affordable & compact, the peltier cooler cools below ambient temperature and eliminates
the risk of condensation
“ “
TECHNICALSPECIFICATION
GENERAL • Lowers the dew point of humidity
• Ambient temperature up to +50°C
• Interchangeable heat exchangers
OPERATION DATA • Gas inlet dew point: Max. 65°C
• Gas inlet temperature: Max. 190°C
• Gas outlet temperature: +1°C to +15°C,
factory setting: +4°C
• Ambient temperature: +5°C to 45°C
• Total cooling capacity: Max. 245kJ/h
• Stability: 0.1°C at ambient temperature 20°C
POWER
• Mains connection: Electrical terminals 2.5mm² / Cable
gland 2 x PG13
• Alarm contact: Free programmable contact 1NO / 1NC,
rating: 250V, 16A AC
• Alarm set points: < +2°C / > +10°C
• Protection class: IP20 EN 60529 / EN 61010
• Electrical protection: Fuse 1,6A
• Power consumption: 2 Peltier elements á 34W
PHYSICAL• Dimensions: 200 x 280 x 190mm (H x L x D)
• Weight: Approx 4.5kg
• Housing: Stainless steel/Aluminium anodised,
Wall-mounting
11 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HTT: +44(0)151 666 8300 F: +44(0)151 666 8329 E: [email protected] W: www.a1-cbiss.com Buy Online: shop.a1-cbiss.com
Cert No. 996ISO 9001
MODELOPTIONS
Model Number 14xx 15xx 16xx
Heat exchangers 1 2 1
Gas flow rate 1x 150Nl/h max 2x 150Nl/h max 1x 350Nl/h max
Sealing Fluoroelastomer Fluoroelastomer Fluoroelastomer
Max. pressure 10 bar a 10 bar a 10 bar a
Pressure drop 2mbar at 150Nl/h 2mbar at 150Nl/h 5mbar at 350Nl/h
Dead volume 35cm³ 35cm³ 100 cm³
Sample gas inlet 1x 1/4”f NPT 1x 1/4”f NPT 1x 1/4”f NPT
Sample gas outlet 1x 1/4”f NPT 1x 1/4”f NPT 1x 1/4”f NPT
Condesate outlet 1x 3/8”f NPT 1x 3/8”f NPT 1x 3/8”f NPT