ANGLE HEADS & SPINDLE SPEEDERS · Taper Model System (mm) (mm) (mm) Drill Cap. (mm) Capacity R.P.M....
Transcript of ANGLE HEADS & SPINDLE SPEEDERS · Taper Model System (mm) (mm) (mm) Drill Cap. (mm) Capacity R.P.M....
113www.SowaTool.com1-800-265-8221
ANGLE HEADS &SPINDLE SPEEDERSRIGHT ANGLE HEADSGFX07 ER 11 Fixed 90º Right Angle Heads 116GFX07L ER 11 Fixed 90º Right Angle Heads 117GFX10 ER 16 Fixed 90º Right Angle Heads 118GFX10L ER 16 Fixed 90º Right Angle Heads 119GFX16 ER 25 Fixed 90º Right Angle Heads 120GFX16L ER 25 Fixed 90º Right Angle Heads 121GFX20 ER 32 Fixed 90º Right Angle Head 122GFX20L ER 32 Fixed 90º Right Angle Head 123GFX S40 Fixed 90º Right Angle Heads 124GPV13 ER 20 Pivoting Angle Heads 125GPV16 ER 25 Pivoting Angle Heads 126GPV20 ER 32 Pivoting Angle Heads 127
DRIVEN TOOLS 128-129
SPINDLE SPEEDERSCAT Taper Spindle Speeders 131BT Taper Spindle Speeders 132HSK Spindle Speeders 133NMTB Taper Spindle Speeders 134
Pull Studs 135
114
ANGLE HEADS
M A D E I N I T A L YATC Series
Designed for Automatic Tool Change Machines
Case hardened and groundshank and shaft
Positioning pin with automatic release
Modular antirotation group
Angular contact preloadedball bearings of precisionclass ABE 7/9
Gleason ground spiral bevelgears for maximum performanceand minimum vibration
Graduated ring
Output- ER Collet (Standard)- Weldon- Shell mill holder- Special
DesignThe compact design, along with mentionedspecifications allows for the highestperformances, high speeds, and long tool life.
Standard external coolantthrough pin
Treated steel head body with360º position andinternal air pressure, maximum rigidity, and corrosion resistant. Minimum thermal expansion
Also Available: MTC Manual Fixed & Pivoting Heads
We invite all inquiries1-800-265-8221 www.SowaTool.com
Angl
e He
ads
& Sp
eede
rs
115
ANGLE HEADS
M A D E I N I T A L YATC Series
Designed for Automatic Tool Change Machines
Long Series Right Angle (GFX16L)for machining in deep positions
Standard Series Right Angle (GFX20)Ideal for milling, drilling, tapping at 90º
Pivoting Angle Head Series (GPV16)Adjustable with in a 90º range for tilt drilling, milling, and tapping.Quick positioning pin.
See page: 121
See page: 122
See page: 126
www.SowaTool.com1-800-265-8221
Angle Heads & Speeders
116
ANGLE HEADS
GFX07 ER 11 Fixed 90º Right Angle Heads
1-800-265-8221 www.SowaTool.com
Angl
e He
ads
& Sp
eede
rs
Ø68
M A D E I N I T A L Y
Technical Data GFX 7Ratio 1:1RPM Max 10,000Max axial load N 120Torque Nm 5Weight Kg. 4Collet mm ER11 1mm - 7mm
Standard Features & Equipment Included:
• External coolant thru positioning pin• Internal air pressure• Retaining block• Wrenches• Grease tube• Instruction book & Inspection report
2
1,6
1,2
0,8
0,4
0
4
3,6
3,2
2,8
2,4
2
KW Nm
0 1000 2000 3000 4000 5000 6000
Rpm
Performance
Collet A B H End Mill & Tap Size Max WeightTaper Model System (mm) (mm) (mm) Drill Cap. (mm) Capacity R.P.M. (Kg.) Code No. Price $CAT 40 GFX07 ER 11 170 35 65 7 M6 10,000 4 381-002 7,388.80 CAT 50 GFX07 ER 11 170 35 80 7 M6 10,000 4 381-004 7,388.80 BT 40 GFX07 ER 11 170 35 65 7 M6 10,000 4 381-006 8,410.10 BT 50 GFX07 ER 11 176 41 80 7 M6 10,000 4 381-008 8,410.10 HSK63 GFX07 ER 11 177 42 65 7 M6 10,000 4 381-010 8,815.50 HSK100 GFX07 ER 11 180 45 80 7 M6 10,000 4 381-012 9,018.10 Other tapers available please inquire
Direction of rotation is opposite to the machine spindlePull Stud
pg 135
Cap 1/8” Gas
H20
45
14
B A
102
Ø18
6.5 21 88.5
50
1.520
20 59.5
30Ø90
6597
40
Release stroke5.5
ER11 1/7
117
GFX07L ER 11 Long Fixed 90º Right Angle Heads
ANGLE HEADS
www.SowaTool.com1-800-265-8221
Angle Heads & Speeders
ER11 1/7
20 H
45
Ø18
6.5 21 15
1.520
20 59.5
134
BA
147
Ø90
30
65
142
40
Cap 1/8” Gas
Release stroke5.5
Ø68
Technical Data GFX 7LRatio 1:1RPM Max 10,000Max axial load N 120Torque Nm 5Weight Kg. 4.3Collet mm ER11 1mm - 7mm
M A D E I N I T A L Y
2
1,6
1,2
0,8
0,4
0
4
3,6
3,2
2,8
2,4
2
KW Nm
0 1000 2000 3000 4000 5000 6000
Rpm
Performance
Collet A B H End Mill & Tap Size Max WeightTaper Model System (mm) (mm) (mm) Drill Cap. (mm) Capacity R.P.M. (Kg.) Code No. Price $CAT 40 GFX07L ER 11 215 35 65 7 M6 10,000 4.3 381-302 8,848.00 CAT 50 GFX07L ER 11 215 35 80 7 M6 10,000 4.3 381-304 8,848.00 BT 40 GFX07L ER 11 215 35 65 7 M6 10,000 4.3 381-306 8,848.00 BT 50 GFX07L ER 11 221 41 80 7 M6 10,000 4.3 381-308 8,848.00 HSK63 GFX07L ER 11 222 42 65 7 M6 10,000 4.3 381-310 9,346.40 HSK100 GFX07L ER 11 225 45 80 7 M6 10,000 4.3 381-312 9,451.90
Standard Features & Equipment Included:
• External coolant thru positioning pin• Internal air pressure• Retaining block• Wrenches• Grease tube• Instruction book & Inspection report
Other tapers available please inquire
Direction of rotation is opposite to the machine spindlePull Stud
pg 135
118
ANGLE HEADS
GFX10 ER 16 Fixed 90º Right Angle Heads M A D E I N I T A L Y
ER 16 Ø1/10
H45
Ø90
12.5
6.5 21
Ø18
A82
81.75
3728
1.75
40
20.367.5
60
B
Release stroke5.5 Cap 1/8” Gas
Ø87
Rpm
2,4
2
1,6
1,2
0,8
0,4
6
5,6
5,2
4,8
4,4
4
KW Nm
0 1000 2000 3000 4000 5000 6000
PerformanceTechnical Data GFX10LRatio 1:1RPM Max 10,000Max axial load N 250Torque Nm 10Weight Kg. 4.3Collet mm ER16 1mm - 10mm
Collet A B H End Mill & Tap Size Max WeightTaper Model System (mm) (mm) (mm) Drill Cap. (mm) Capacity R.P.M. (Kg.) Code No. Price $CAT 40 GFX10 ER 16 150 35 65 10 M8 10,000 4.3 381-020 5,674.30 CAT 50 GFX10 ER 16 150 35 80 10 M8 10,000 4.3 381-022 5,674.30 BT 40 GFX10 ER 16 150 35 65 10 M8 10,000 4.3 381-024 5,674.30 BT 50 GFX10 ER 16 156 41 80 10 M8 10,000 4.3 381-026 5,674.30 HSK63 GFX10 ER 16 157 42 65 10 M8 10,000 4.3 381-028 6,079.60 HSK100 GFX10 ER 16 160 45 80 10 M8 10,000 4.3 381-030 6,282.30
Standard Features & Equipment Included:
• External coolant thru positioning pin• Internal air pressure• Retaining block• Wrenches• Grease tube• Instruction book & Inspection report
Other tapers available please inquire
Direction of rotation is opposite to the machine spindlePull Stud
1-800-265-8221 www.SowaTool.com
Angl
e He
ads
& Sp
eede
rs
pg 135
119
GFX10L ER 16 Long Fixed 90º Right Angle Heads
ANGLE HEADS
ER 16 1/10
H20
45
A
216.5
Ø18
B 157
20.3
28
82372
142.5
134
40Ø90
Cap 1/8” Gas
Release stroke5.5
Ø87
M A D E I N I T A L Y
Rpm
2,4
2
1,6
1,2
0,8
0,4
6
5,6
5,2
4,8
4,4
4
KW Nm
0 1000 2000 3000 4000 5000 6000
PerformanceTechnical Data GFX10LRatio 1:1RPM Max 10,000Max axial load N 250Torque Nm 10Weight Kg. 5.2Collet mm ER16 1mm - 10mm
Collet A B H End Mill & Tap Size Max WeightTaper Model System (mm) (mm) (mm) Drill Cap. (mm) Capacity R.P.M. (Kg.) Code No. Price $CAT 40 GFX10L ER 16 225 35 65 10 M8 10,000 5.2 381-320 9,249.20 CAT 50 GFX10L ER 16 225 35 80 10 M8 10,000 5.2 381-322 9,249.20 BT 40 GFX10L ER 16 225 35 65 10 M8 10,000 5.2 381-324 9,249.20 BT 50 GFX10L ER 16 231 41 80 10 M8 10,000 5.2 381-326 9,249.20 HSK63 GFX10L ER 16 232 42 65 10 M8 10,000 5.2 381-328 9,747.70 HSK100 GFX10L ER 16 235 45 80 10 M8 10,000 5.2 381-330 9,853.00
Standard Features & Equipment Included:
• External coolant thru positioning pin• Internal air pressure• Retaining block• Wrenches• Grease tube• Instruction book & Inspection report
Other tapers available please inquire
Direction of rotation is opposite to the machine spindlePull Stud
www.SowaTool.com1-800-265-8221
Angle Heads & Speeders
pg 135
120
ANGLE HEADS
GFX16 ER 25 Fixed 90º Right Angle Heads
58
Ø90
H12
.545
Ø18
6.5 21 29
65
67.5
82 A
B
335
47 119.5
Release stroke5.5 Cap 1/8” Gas
Ø130
M A D E I N I T A L Y
Rpm0 1000 2000 3000 4000 5000 6000
6
4,8
3,6
2,4
1,2
0
18
16,5
15,5
14,5
13,5
12,5
KW Nm PerformanceTechnical Data GFX16
Ratio 1:1RPM Max 8,000Max axial load N 510Torque Nm 24Weight Kg. 5.4Collet mm ER25 2mm - 16mm
System A B H End Mill & Tap Size Max WeightTaper Model Collet (mm) (mm) (mm) Drill Cap. (mm) Capacity R.P.M. (Kg.) Code No. Price $CAT 40 GFX16 ER 25 150 35 65 16 M12 8,000 5.4 381-100 6,586.30 CAT 50 GFX16 ER 25 150 35 80 16 M12 8,000 5.4 381-102 6,586.30 BT 40 GFX16 ER 25 150 35 65 16 M12 8,000 5.4 381-104 6,586.30 BT 50 GFX16 ER 25 156 41 80 16 M12 8,000 5.4 381-106 6,586.30 HSK63 GFX16 ER 25 157 42 65 16 M12 8,000 5.4 381-108 6,991.60 HSK100 GFX16 ER 25 160 45 80 16 M12 8,000 5.4 381-110 7,194.20
Standard Features & Equipment Included:
• External coolant thru positioning pin• Internal air pressure• Retaining block• Wrenches• Grease tube• Instruction book & Inspection report
Other tapers available please inquire
Direction of rotation is the same as the machine spindle
Pull Stud
1-800-265-8221 www.SowaTool.com
Angl
e He
ads
& Sp
eede
rs
pg 135
121
GFX16L ER 25 Long Fixed 90º Right Angle Heads
ANGLE HEADS
Ø18
6.5 21
20 H
45
29137.5
58R32
3
3547 119.5
A B
Ø90
152
135
Release stroke5.5 Cap 1/8” Gas
130
Rpm0 1000 2000 3000 4000 5000 6000
6
4,8
3,6
2,4
1,2
0
18
16,5
15,5
14,5
13,5
12,5
KW Nm Performance
Technical Data GFX16L
Ratio 1:1RPM Max 8,000Max axial load N 510Torque Nm 24Weight Kg. 6.7Collet mm ER25 2mm - 16mm
Collet A B H End Mill & Tap Size Max WeightTaper Model System (mm) (mm) (mm) Drill Cap. (mm) Capacity R.P.M. (Kg.) Code No. Price $CAT 40 GFX16L ER 25 220 35 65 16 M12 8,000 6.7 381-400 11,117.60 CAT 50 GFX16L ER 25 220 35 80 16 M12 8,000 6.7 381-402 11,117.60 BT 40 GFX16L ER 25 220 35 65 16 M12 8,000 6.7 381-404 11,117.60 BT 50 GFX16L ER 25 226 41 80 16 M12 8,000 6.7 381-406 11,117.60 HSK63 GFX16L ER 25 227 42 65 16 M12 8,000 6.7 381-408 11,620.80 HSK100 GFX16L ER 25 230 45 80 16 M12 8,000 6.7 381-410 11,725.60
Standard Features & Equipment Included:
• External coolant thru positioning pin• Internal air pressure• Retaining block• Wrenches• Grease tube• Instruction book & Inspection report
Other tapers available please inquire
Direction of rotation is the same as the machine spindle
M A D E I N I T A L Y
Pull Stud
www.SowaTool.com1-800-265-8221
Angle Heads & Speeders
pg 135
122
ANGLE HEADS
GFX20 ER 32 Fixed 90º Right Angle Head H
2055
Ø110 75
92 B A
37.5
346
66 152.5
6.5 21
73
77.5Ø1
8Release stroke5.5
Cap 1/8” Gas
Ø164
Rpm
10
8
6
4
2
0
32
30
28
26
24
22
KW Nm
0 1000 2000 3000 4000
PerformanceTechnical Data GFX20
Ratio 1:1RPM Max 4,000Max axial load N 1250Torque Nm 40Weight Kg. 11Collet mm ER32 2.5mm - 20mm
Collet A B H End Mill & Tap Size Max WeightTaper Model System (mm) (mm) (mm) Drill Cap. (mm) Capacity R.P.M. (Kg.) Code No. Price $CAT 50 GFX20 ER 32 160 35 80 20 M16 4,000 11 381-148 7,295.60
Standard Features & Equipment Included:
• External coolant thru positioning pin• Internal air pressure• Retaining block• Wrenches• Grease tube• Instruction book & Inspection report
Other tapers available please inquire
Direction of rotation is the same as the machine spindle
M A D E I N I T A L Y
Pull Stud
1-800-265-8221 www.SowaTool.com
Angl
e He
ads
& Sp
eede
rs
pg 135
123
GFX20L ER 32 Long Fixed 90º Right Angle Head
ANGLE HEADS
20 H
55
6.5 21
B 172A
346
66 152.5
75R 40
Ø18
37.5157.5
153
Ø110
Cap 1/8” Gas
Release stroke5.5
Ø164
Rpm
10
8
6
4
2
0
32
30
28
26
24
22
KW Nm
0 1000 2000 3000 4000
PerformanceTechnical Data GFX20LRatio 1:1RPM Max 4,000Max axial load N 1250Torque Nm 40Weight Kg. 13.8Collet mm ER32 2.5mm - 20mm
Collet A B H End Mill & Tap Size Max WeightTaper Model System (mm) (mm) (mm) Drill Cap. (mm) Capacity R.P.M. (Kg.) Code No. Price $CAT 50 GFX20L ER 32 240 35 80 20 M16 4,000 13.8 381-448 11,920.10
Standard Features & Equipment Included:
• External coolant thru positioning pin• Internal air pressure• Retaining block• Wrenches• Grease tube• Instruction book & Inspection report
Other tapers available please inquire
Direction of rotation is the same as the machine spindle
M A D E I N I T A L Y
Pull Stud
www.SowaTool.com1-800-265-8221
Angle Heads & Speeders
pg 135
124
ANGLE HEADS
GFX S40 Fixed 90º Right Angle HeadsH
26
85
3.560
91.5 16
8.5
Ø28
8 24.5
Ø170
105
52.597
83
A B 110
Release stroke7
Cap 1/8” Gas
ISO / BT / CATØ192
Rpm
20
18
16
14
12
10
8
6
4
2
0
90
85
80
75
70
65
60
55
50
45
40
KW Nm
0 1000 2000 3000 4000
Performance
Technical Data GFX S40Ratio 1:1RPM Max 4,000Max axial load N 1800Torque Nm 140Weight Kg. 22Drill / Tap mm 26mm / M20
A B H End Mill & Tap Size Max WeightTaper Model (mm) (mm) (mm) Drill Cap. (mm) Capacity R.P.M. (Kg.) Code No. Price $CAT 50 GFX S40 190 35 110 26 M20 4,000 22 381-121 9,322.10 BT 50 GFX S40 196 41 110 26 M20 4,000 22 381-123 9,322.10 HSK100 GFX S40 200 45 110 26 M20 4,000 22 381-125 9,930.00
Standard Features & Equipment Included:
• External coolant thru positioning pin• Internal air pressure• Retaining block• Grease tube• Instruction book & Inspection report
Other tapers available please inquire
Note: Accepts CAT40, BT40, SK40 and NMTB 40 Taper Tooling
Direction of rotation is the same as the machine spindle
M A D E I N I T A L Y
Pull Stud
1-800-265-8221 www.SowaTool.com
Angl
e He
ads
& Sp
eede
rs
pg 135
125
GPV13 ER 20 Pivoting Angle Heads
ANGLE HEADS
Reference pin
Cap 1/8” Gas44
Ø42.5
28.5
80.5
H20
36.5
67
43
2852.5
Ø73
B
Ø18
6.5 21
A
Release stroke5.5
Reference Pin
0°- 90°
Dia.120
Rpm
2,5
2
1,5
1
0,5
0
6
5
4
3
2
1
KW Nm
0 1000 2000 3000 4000
Performance
Technical Data GPV13Ratio 1:1RPM Max 4,000Max axial load N 450Torque Nm 6Weight Kg. 4.2Collet mm ER20 1mm-13mm
Collet A B H End Mill & Tap Size Max WeightTaper Model System (mm) (mm) (mm) Drill Cap. (mm) Capacity R.P.M. (Kg.) Code No. Price $CAT 40 GPV13 ER 20 130 35 65 13 M10 4,000 4.2 381-198 7,092.90 CAT 50 GPV13 ER 20 130 35 80 13 M10 4,000 4.2 381-200 7,092.90 BT 40 GPV13 ER 20 130 35 65 13 M10 4,000 4.2 381-202 7,092.90 BT 50 GPV13 ER 20 136 41 80 13 M10 4,000 4.2 381-204 7,092.90 HSK63 GPV13 ER 20 137 42 65 13 M10 4,000 4.2 381-206 7,498.20 HSK100 GPV13 ER 20 140 45 80 13 M10 4,000 4.2 381-208 7,700.90
Standard Features & Equipment Included:
• External coolant thru positioning pin• Internal air pressure• Retaining block• Wrenches• Grease tube• Instruction book & Inspection report
Other tapers available please inquire
Direction of rotation is opposite to the machine spindle
M A D E I N I T A L Y
Pull Stud
www.SowaTool.com1-800-265-8221
Angle Heads & Speeders
pg 135
126
ANGLE HEADS
GPV16 ER 25 Pivoting Angle HeadsØ9
0
Ø50.5
3149
94
33.5
53
82
2045
Ø18
6.5 21 67.5
Reference pin
H
B A
Release stroke5.5
Cap 1/8” Gas
Reference Pin
0°- 90°
142
Rpm
5
4
3
2
1
0
10
9
8
7
6
5
KW Nm
0 1000 2000 3000 4000
Performance
Technical Data GPV16Ratio 1:1RPM Max 4,000Max axial load N 480Torque Nm 18Weight Kg. 6.8Collet mm ER25 2mm-16mm
Collet A B H End Mill & Tap Size Max WeightTaper Model System (mm) (mm) (mm) Drill Cap. (mm) Capacity R.P.M. (Kg.) Code No. Price $CAT 40 GPV16 ER 25 150 35 65 16 M12 4,000 6.8 381-270 7,660.40 CAT 50 GPV16 ER 25 150 35 80 16 M12 4,000 6.8 381-272 7,660.40 BT 40 GPV16 ER 25 150 35 65 16 M12 4,000 6.8 381-274 7,660.40 BT 50 GPV16 ER 25 156 41 80 16 M12 4,000 6.8 381-276 7,660.40 HSK63 GPV16 ER 25 157 42 65 16 M12 4,000 6.8 381-278 8,167.00 HSK100 GPV16 ER 25 160 45 80 16 M12 4,000 6.8 381-280 8,227.80
Standard Features & Equipment Included:
• External coolant thru positioning pin• Internal air pressure• Retaining block• Wrenches• Grease tube• Instruction book & Inspection report
Other tapers available please inquire
Direction of rotation is opposite to the machine spindle
M A D E I N I T A L Y
Pull Stud
1-800-265-8221 www.SowaTool.com
Angl
e He
ads
& Sp
eede
rs
pg 135
127
GPV20 ER 32 Pivoting Angle Heads
ANGLE HEADS
Ø64.6
36
106
51
Ø110
65
4177.5216.5
H20
55
B A
92
18
Release stroke5.5 Cap 1/8” Gas
Reference pin
Reference pin
0°- 90°
165
Rpm
0 1000 2000 3000 4000
10
9
8
7
6
5
4
3
2
1
0
30
29
28
27
26
25
24
23
22
21
20
KW Nm Performance
Technical Data GPV20
Ratio 1:1RPM Max 4,000Max axial load N 715Torque Nm 32Weight Kg. 13Collet mm ER32 3mm-20mm
Collet A B H End Mill & Tap Size Max WeightTaper Model System (mm) (mm) (mm) Drill Cap. (mm) Capacity R.P.M. (Kg.) Code No. Price $CAT 50 GPV20 ER 32 160 35 80 20 M16 4,000 13 381-150 9,727.40 BT 50 GPV20 ER 32 166 41 80 20 M16 4,000 13 381-154 9,727.40 HSK100 GPV20 ER 32 170 45 80 20 M16 4,000 13 381-158 10,335.40
Standard Features & Equipment Included:
• External coolant thru positioning pin• Internal air pressure• Retaining block• Wrenches• Grease tube• Instruction book & Inspection report
aOther tapers available please inquire
Direction of rotation is opposite to the machine spindle
M A D E I N I T A L Y
Pull Stud
www.SowaTool.com1-800-265-8221
Angle Heads & Speeders
pg 135
128
ANGLE HEADS
1-800-265-8221 www.SowaTool.com
Angl
e He
ads
& Sp
eede
rs
INTRODUCINGDRIVEN TOOLS
DOOSAN HAAS MAZAK
NOW STOCKED IN THE U.S.A.
M A D E I N I T A L Y
WE INVITE INQUIRIES FOR OKUMA, NAKAMURA, MIYANO, BIGLIA
DMG MORI
129
ANGLE HEADS
www.SowaTool.com1-800-265-8221
Angle Heads & Speeders
Int. GageModel Orient Rotation Turret Output Coolant Nm Rpm Length Code No. Price $99.MS.A59 AX NL60 ER-32 - 60 10,000 Max 89.9 381-504 2,081.50 99.MS.A60 AX NL60 ER-32 • 80bar 60 10,000 Max 89.9 381-505 3,079.80 99.MS.A72 RD NL60 ER-32 - 60 10,000 90 381-506 4,460.30 99.MS.A73 RD NL60 ER-32 • 80bar 60 10,000 90 381-507 4,991.20
Int. GageModel Orient Rotation Turret Output Coolant Nm Rpm Length Code No. Price $99.DS.A01 AX BMT55 ER-25 - 40 8,000 57.2 381-512 1,805.40 99.DS.A02 AX BMT55 ER-25 • 80bar 40 8,000 57.2 381-513 2,070.90 99.DS.A11 RD BMT55 ER-25 - 40 8,000 70 381-514 3,398.40 99.DS.A12 RD BMT55 ER-25 • 80bar 40 8,000 70 381-515 4,014.30 99.DS.A41 AX BMT65 ER-32 - 70 6,000 72.5 381-516 2,124.00 99.DS.A42 AX BMT65 ER-32 • 70bar 70 6,000 72.5 381-517 2,442.50 99.DS.A51 RD BMT65 ER-32 - 70 6,000 72 381-518 3,568.20 99.DS.A52 RD BMT65 ER-32 • 70bar 70 6,000 72 381-519 4,226.70
Int. GageModel Orient Rotation Turret Output Coolant Nm Rpm Length Code No. Price $99.HA.590082 AX VDI40 ER-32 - 63 6,000 82.1 381-500 1,571.80 99.HA.590082B AX VDI40 ER-32 • 25bar 63 6,000 82.1 381-501 1,964.70 99.HA.590084 RD VDI40 ER-32 - 63 6,000 Max. 75 381-502 2,952.40 99.HA.590084B RD VDI40 ER-32 • 25bar 63 6,000 Max. 75 381-503 3,734.60
Direction of rotation is opposite to the machine spindle
Driven tools for CNC turning centers allow milling, drilling, and tapping operations on the lathes withoutadditional parts handling. GS can supply a wide range of types in order to equip the CNC lathes and turretsof the most popular builders on the market with an unbeatable price/quality ratio.
Main technical features• Main body designed to maximize rigidity and reduce vibration• Specially treated corrosion resistant steel body• Angular contact bearings + taper roller bearings on output spindle for better rigidity and longer life
• Gleason spiral bevel gears with completely ground involute form
• Internal coolant option - up to 100bar• Designed, manufactured and assembled in Italy• 2 Year guarantee
Int. GageModel Orient Rotation Turret Output Coolant Nm Rpm Length Code No. Price $ 99.MZ.A58 Off-AX QTN2-40 ER-32 - 80 6,000 50 381-508 2,761.10 99.MZ.A59 Off-AX QTN2-40 ER-32 • 80bar 80 6,000 116 381-509 4,247.90 99.MZ.A65 RD QTN2-40 ER-32 - 80 6,000 130 381-510 2,950.50 99.MZ.A66 RD QTN2-40 ER-32 • 80bar 80 6,000 130 381-511 3,893.90
Direction of rotation is the same as the machine spindle
Driven Tools For DMG MORI Lathes
Driven Tools For DOOSAN Lathes
Driven Tools For HAAS Lathes
Driven Tools For MAZAK Lathes
130
SPINDLE SPEEDERS
These Spindle Speeders have been designed and developed to offer a product that ensuresmaximum reliability and precision in milling and drilling. From design to static and dynamic testing ofthe finished product.
• Max. 22,000 continuous revs (higher ratings on request)• Used in particular for finishing operations• Manual or automatic mounting option• Allow the machine to rotate at low rpm• Possibility of using hard metal tools
The compact construction, the heat-treated steel parts, and the ground gears on the involute guaranteetransmission of high power ratings with amazingly low noise levels. The spindle is supported by a setof preloaded precision ball bearings with oblique contact that ensure greater strength and rotationprecision within 0.01 mm.
• Two or three planetary gears for high transmission power ratings• Special tool attachment on request (Komet, DIN 1835, etc.)• Coolant through the tool centre, on request• Machine connection, on request (Morse Cone, DIN 69880 etc.)• Interchangeable anti-rotation pin which can therefore be customized by the buyer• Can be mounted on traditional machines and on machines with automatic tool change.• Lubricated with a long-life synthetic grease that is practically maintenance free.
The test certificate attached to each Spindle Speeder guarantees the quality of the product.
Spindle SpeedersM A D E I N I T A L Y
1-800-265-8221 www.SowaTool.com
Angl
e He
ads
& Sp
eede
rs
131
CAT TAPER SPINDLE SPEEDERS
SPINDLE SPEEDERS
CAT Taper Spindle Speeders
CAT 40 CAT 50Series Code No. Price $ Code No. Price $
CT10/ER20 384-214 8,838.00 384-216 9,931.00 CT13/ER25 384-218 9,874.50 384-220 10,722.40 CT16/ER32 384-222 12,569.20
M A D E I N I T A L Y
Pull Stud
www.SowaTool.com1-800-265-8221
Angle Heads & Speeders
pg 135
132
SPINDLE SPEEDERS
BT TAPER SPINDLE SPEEDERS
1-800-265-8221 www.SowaTool.com
Angl
e He
ads
& Sp
eede
rs
BT 40 BT 50Series Code No. Price $ Code No. Price $
BT10/ER20 384-236 8,611.90 384-238 9,535.30 BT13/ER25 384-240 9,836.80 384-242 10,289.00 BT16/ER32 384-244 11,340.50
M A D E I N I T A L Y
Pull Stud
BT Taper Spindle Speeders
pg 135
133
HSK SPINDLE SPEEDERS
SPINDLE SPEEDERS
www.SowaTool.com1-800-265-8221
Angle Heads & Speeders
HSK 63 HSK 80 HSK 100Series Code No. Price $ Code No. Price $ Code No. Price $
HSK10/ER20 384-246 10,100.60 384-248 10,590.50 384-250 10,590.50 HSK13/ER25 384-252 10,590.50 384-254 11,174.70 384-256 11,174.70 HSK16/ER32 384-258 12,248.90 384-260 12,248.90
M A D E I N I T A L Y
HSK Spindle Speeders
134
SPINDLE SPEEDERS
NMTB TAPER SPINDLE SPEEDERS
1-800-265-8221 www.SowaTool.com
Angl
e He
ads
& Sp
eede
rs
NMTB 40 NMTB 50Series Code No. Price $ Code No. Price $
NMTB-10/ER20 384-224 8,517.70 384-226 8,687.20 NMTB-13/ER25 384-228 10,100.60 384-230 10,439.80 NMTB-16/ER32 384-232 12,474.90 NMTB-30/ER50 384-234 32,412.10
M A D E I N I T A L Y
NMTB Taper Spindle Speeders
135
PULL STUDS
www.SowaTool.com1-800-265-8221
Angle Heads & Speeders
Pull Studs Cross-Reference Chart
RetentionKnob Collis Parlec Command Lyndex
Supply No. No. No. No. Code No. Price $BT-30 (M12 x 1.75 Draw Bar Thread)
311-09 64723 3003TRK RB2M-0001 B30-4500 366-000 22.70 311-09A 64721 3004TRK RB2M-0002 B30-6000 366-002 22.70
BT-40 (M16 x 2 Draw Bar Thread)329-12 RS4M-0205 B40-1500 366-003 30.80 329-13 69101 P329-13 RS4M-0205C 366-004 34.10 311-13 64711 4003TRK RB4M-0001 B40-4500 366-006 27.60 311-13A 64713 4004TRK RB4M-0002 B40-6000 366-008 27.60 311013B 69059 4002TRK RB4M-0003 B40-9000 366-010 27.60 311-13D 4003TRKC RB4M-0001-C B40-4500* 366-012 32.40 311-13E 4004TRKC RB4M-0002-C B40-6000* 366-014 32.40 311-13F 4002TRKC RB4M-0003-C B40-9000* 366-016 32.40 111-26 69047 F40TRK RS4M-0115 366-018 26.00 111-22A 69980 A40TRK RS4M-0105 366-020 26.00 312-25 366-022 30.80 111-26A F40TRKC RS4M-0115C 366-024 30.80
366-026 32.40 350-00V MH40TRK 366-028 29.20 171-26 366-030 29.20 171-27 366-032 35.70
CT-40 (5/8-11 Draw Bar Thread)711-23 4030TRK RS4E-0114-C 366-034 32.40
366-036 22.70 312-26 69007 366-038 26.00 111-22 67751 40TRK RC4E-0001 C40-STD* 366-040 22.70 111-23 64724 40NTRK RC4E-0002 C40-STD 366-042 22.70 312-22 64732 RB4E-0100 C40-MAZAK 366-044 26.00 126-22 69978 366-046 26.00 316-16 4008TRK RS4E-0212 C40-1500 366-048 29.20 311-14 64712 4009TRK C40S-4500 366-050 26.00 311-14A 64714 4014TRK RB4E-0002 C40S-6000 366-052 26.00 311-14B 64683 4001TRK RB4E-0003 C40S-9000 366-054 26.00 316-17 64730 4008TRKC RS4E-0212-C C40-1500* 366-056 32.40 315-14 4009TRKC C40S-4500* 366-058 30.80 318-14A 4014TRKC RB4E-0002-C C40S-6000* 366-060 30.80 360-30 4001TRKC RB4E-0003-C C40S-9000* 366-062 30.80 171-22 64725 C400TRK RS4E-0104 366-064 27.60 171-23 69029 C400TRKC RS4E-0104-C 366-066 34.10 321-14 64729 4005TRK RB4E-0001 C40-4500 366-068 27.60
C40-6000 366-070 27.60 C40-9000 366-072 27.60 C40-4500* 366-074 32.40 C40-6000* 366-076 32.40 C40-9000* 366-078 32.40
CT-45 (3/4-10 Draw Bar Thread)111-33 67752 45TRK RC5E-0001 C45STD* 366-080 26.00
BT-50 (M24 x 3 Draw Bar Thread)111-44A A50TRK RS6M-0105 366-082 34.10 311-17 69995 5003TRK RS6M-0001 B50-4500 366-084 39.00 311-17A 5004TRK RB6M-0002 B50-6000 366-086 39.00 311-17B 64719 5002TRK RB6M-0003 B50-9000 366-088 39.00 316-43 5003TRKC RB6M-0001-C B50-4500* 366-090 45.40
CT-50 (1”-8 Draw Bar Thread)111-46 69993 50NTRK RC6E-0002 C50-STD 366-092 30.80 312-46 64737 M50TRK 366-094 35.70 111-44 57753 50TRK RC6E-0001 C50-STD* 366-096 30.80 311-18 64720 5005TRK RB6E-0001 C50-4500 366-098 37.30 311-18A 64722 5014TRK RB6E-0002 C50-6000 366-100 37.30 311-18B 69057 5001TRK RB6E-0003 C50-9000 366-102 37.30 316-45 64731 5005TRKC RB6E-0001-C C50-4500* 366-104 43.70 318-44A 69057 5014TRKC RB6E-0002-C C50-6000* 366-106 43.70 342-18B 5001TRKC RB6E-0003-C C50-9000 366-108 43.70
Can’t find your pull stud?We invite your inquiriesPlease have ready the following Information when calling• Taper of Machine• Make & Model No. of the Machine• Draw Bar Thread Dia & Pitch• Taper Angle required underneath head of stud
*Coolant Thru
136 1-800-265-8221 www.SowaTool.com
Angl
e He
ads
& Sp
eede
rs
CALL TODAY FOR A QUOTE
CALL TODAY FOR A QUOTE
• Vises are matched• An integral key and large fasteners reduce reflection
• Chip cover protects lead screw• Moveable jaw does not lift off the bed• Interchangeable soft jaws• 6” Jaw Width• 7.5” Jaw Opening • Model GS675
327-275M 230-863
• Thin style, 1/8" thick• Matched pairs• Made of high grade steel alloy• Hardened and ground• Tolerance ± 0.0003"• Length: 6”• Height:1/2, 5/8, 3/4, 7/8, 1,1-1/8, 1-1/4, 1-3/8,1-1/2, 1-5/8
MACHINE VISE + PARALLEL SET
Code No.: 500-778
DOUBLE CLAMP VISE WITHFREE ALUMINUM SOFT JAWS
• One handle simultaneously operates two moveable jaws and clamps 2 pieces of workpiece of same or different size or one large workpiece
• The moveable jaw ANTI-LIFT mechanism provides alignment to workpiece without jaw lift• There are 6 kinds of clamping ways to meet workpieces of different shapes and sizes• The whole body is precisely ground and height tolerance is within ±0.025mm (±0.001”),
therefore several vises can be lined up for production• The rigid construction prevents base distortion
+
FREECode: 382-600• Model TLD-60G/HV• 6” jaw width• 4.9” jaw openings 6” Aluminum Soft Jaws
Code: 382-602
Promo Code: 500-273