Analysis of the behaviour of the simulated moving bed ... · Analysis of the behaviour of the...

Abstracts accepted at the 3rd International Symposium on Two-Phase Flow Modelling and ExperimentationPisa, 22-24 September 2004 0 / 45

Analysis of the behaviour of the simulated moving bed reactor in the sucrose inversion process

E.A. Borges da Silva, D.P. Souza, A.A. Ulson de Souza and S.M.A. Guelli U. SouzaUniversidade Federal de Santa Catarina, Departamento de Engenharia Química e Engenharia de Alimentos,LABSIN, Laboratório de Simulação Numérica de Sistemas Químicos, Florianópolis, Brazil

Leak detection in pipelines operating with gas-liquid mixtures

I.B. Macias, C.F. Braga, S.L. Cruz and J.F.R. PereiraDepartment of Chemical Systems Engineering, FEQ / UNICAMP, Campinas, Brazil

Dynamic slug tracking model for horizontal gas-liquid flow

E. Spanó Rosa and E. de Moraes FranklinUniversidade Estadual de Campinas, Faculdade de engenharia Mecânica, Departamento de Energia, BarãoGeraldo, Campinas, Brazil

Experimental study of the luminescence during the cavitation of a single bubble

M.O. Barbaglia and F.J. BonettoComision Nacional de Energia Atomica and CONICET, PLADEMA - UNICEN, Tandi, Argentina

Study of countercurrent flow limitation in horizontal pipe connected to an inclined one

M.A. NavarroComissão Nacional da Energia Nuclear, Centro de Desenvolvimento da Tecnologia Nuclear, Pampulha, BeloHorizonte, Brazil

Numerical evaluaton of two-fluid model solutions for turbulent fully-developed bubbly two-phase flow

O.E. Azpitarte and G.C. BuscagliaCentro Atomico Bariloche and Instituto Balseiro, Bariloche, Argentina

Modeling of the packed thread dyeing process and numerical results for effective diffusivity

D. Souza, A.A. Ulson de Souza and S.M.A. Guelli U. SouzaUniversidade Federal de Santa Catarina, Departamento de Engenharia Química e Engenharia de Alimentos,LABSIN, Laboratório de Simulação Numérica de Sistemas Químicos, Florianópolis, Brazil

Combustion of isolated single droplets of vacuum residue-water emulsions

R. Ocampo-Barrera and M. Ramirez de SantiagoInstituto Mexicano del Petróleo, Av. Framboyanes Lote 11 Manzana 2, entre Av. Las Torres y Av. Arrayanes,Ciudad Industrial Bruno Pagliai, Veracruz, Veracruz, México

Kinetic modelling for the oligomerization in liquid phase of an industrial olefin mixture

M. L. Jiménez, J. A. Muñoz Arroyo, M. Garfias, V. Samano, G. Ferrat, E. Romero and M. A. MantillaInstituto Mexicano del Petróleo, Eje Central Lázaro Cárdenas 152, Col. San Bartolo Atepehuacan, México,México

Improving the sour wet gas transport "Sunuapa - Giraldas - CPG Cactus" using the multiphasetransient simulator OLGA 2000

E. A. Bustos, A. Suárez Chávez and C. Cabrales Cruz Instituto Mexicano del Petróleo, Ceiba No.6 Fracc. Framboyanes, México


Numerical simulation of capillary-tube working with pure and mixed refrigerants under adiabatic andnon-adiabatic conditions

O. García-Valladares, C. D. Pérez-Segarraa and A. OlivaaCentro de Investigación en Energía de la UNAM, Apdo. Postal 34, Temixco, Morelos, México

Numerical simulation of concentric heat exchangers

O. García-ValladaresCentro de Investigación en Energía de la UNAM, Apdo. Postal 34, Temixco, Morelos, México

Two-phase flow modeling in a solar concentrator with ammonia evaporation

N. Ortega, O. García-Valladares and R. BestCentro de Investigación en Energía de la UNAM, Apdo. Postal 34, Temixco, Morelos, México

Flow modelling through curved vane flame stabilizers and its validation with PIV experimentation

R. Escalera, A. Chávez, R. Bolado and M. MorenoInstituto Mexicano del Petróleo ,Av. Framboyanes Lote 11 Manzana 2, entre Av. Las Torres y Av. Arrayanes, Ciudad Industrial Bruno Pagliai, Veracruz, Veracruz, México

An assessment of theoretical modeling for in-tube condensation in the presence of air

F. Aglar* and O. Yesin ***Turkish Atomic Energy Authority, Eskisehir Yolu 9, Km 06530, Lodumlu-Ankara, Turkey, **Middle EastTechnical University, Ankara, Turkey

Two-phase flow regime maps: transformations for air-lift pump performance presentations

V.C. Samaras and D.P. MargarisFluid Mechanics Lab., Mechanical Engineering and Aeronautics Dept., University of Patras, Patras, Greece

Study of free falling liquid layer in inclined pipes: effect of diameter and inclination angle

J. Lioumbas*, S.V. Paras* and O.J. Nydal***Department of Chemical Engineering, Aristotle University of Thessaloniki Univ.Box 455, GThessaloniki,Greece, **Department of Energy and Process Technology, NTNU, Trondheim, Norway

Free turbulence effects on bubble terminal velocity

F. Scargiali, R. Di Maggio and A. BrucatoDip. di Ingegneria Chimica dei Processi e dei Materiali, Università di Palermo, Palermo, Italy

Thermodynamic effects on hydrofoil and inducer cavitation

E. Rapposelli**, A. Cervone*, C. Bramanti* and L. D'Agostino**Dip. Di Ingegneria Aerospaziale, Università degli Studi di Pisa, Pisa, Italy. **Centrospazio/ALTA,Ospedaletto (Pisa), Italy

Numerical simulation of suspension flow in the entrance part of a tube

R. Shtinkova, E. Toshev and B. HristovInstitute of Mechanics, Dept. of Complex and Multiphase Flows, Sofia, Bulgaria


Experimental study of turbulence modulation in a grid-generated gas-solid particles flow

M. Hussainov, A. Kartushinsky, U. Rudi, I. Shcheglov, and S. TislerEstonian Energy Research Institue at Tallinn Technical University, Tallin, Estonia

Particle dynamics in the vortex ring

F. Kaplansky*, S.S. Sazhin** and U. Rudi**Estonian Energy Research Institue at Tallinn Technical University, Tallin, Estonia, **School ofEngineering, Faculty of Science and Engineering, The University of Brighton, Brighton, UK

Bases for dust mobilisation modelling in the light of stardust experiments

S. Paci*, N. Forgione*, F. Frediani* and M.T. Porfiri***Dip. di Ingegneria Meccanica, Nucleare e della Produzione, Pisa, Italy, **ENEA FUS, Frascati, Italy

Pulsed laser measurement and CFD simulation of solid particle concentration distribution in stirredtanks

A. Brucato, F. Grisafi, G. Micale, L. Rizzuti and F. ScargialiDip. di Ingegneria Chimica dei Processi e dei Materiali, Università di Palermo, viale delle Scienze, Palermo,Italy

Experimental and numerical studies of pressure drop in particle-laden horizontal channel flow

S. Laìn *,*** and M. Sommerfeld***Dept. Mechanical Engineering, Universidad Autònoma de Occidente (CUAO), Colombia.**Institute fur Verfahrenstechnik, FB IW, Martin Luter University, Germany, ***Laboratory for Research inCombustion technologies LITEC-CSIC, Spain

Simplified transient multiphase model for oil field development analysis

P. Andreussi, M. Bonuccelli, A. Bousbia and V. FaluomiUniversity of Pisa, TEA Group, Italy

Modelling multiphase flow at high gas velocity for well blowout analysis

P. Andreussi, M. Bonuccelli, A. Bousbia V. Faluomi and P. BlottoUniversity of Pisa, TEA Group, Italy, ENI-AGIP, Italy

The constitutive relation for the transport of mass in turbulent flows

R. MauriDip. di Ingegneria Meccanica, Nucleare e della Produzione, Pisa, Italy

Time dependent simulation of heat and mass transfer in aircraft thermal deicing sistem

G. Croce and P. D'AgaroDipartimento di Energetica e Macchine Università di Udine, Udine, Italy

Experimental measurements of solid distribution concentration in mechanically stirred solid-liquidsystems

E. Brunazzi, C. Galletti, A. Paglianti and S. PintusLaboratory of Process Equipment, Department of Chemical Engineering, Industrial Chemistry and MaterialsScience, University of Pisa, Pisa, Italy


Modelling of multiphase unconfined jet flames

P. Blotto*, M. Bonuccelli**, M. Falcitelli***, N. Mancini**** and F. Podenzani*****Eni/Division Exploration and Production, San Donato Milanese, Italy, **TEA Sistemi SpA, Pisa, ***TEAAmbiente srl, Pisa, ****EniTecnologie, San Donato Milanese, Italy

Eulerian-Lagrangian modeling of solid-liquid flow in turbulently stirred tanks

J. DerksenKramers Laboratorium, Delft University of technology, Delft, The Netherlands

Transient heating of droplets

S.S. Sazhin*, P.A. Krutitskii**, W.A. Abdelghaffar*, E.M. Sazhina* and M.R. Heikal**School of Engineering, Faculty of Science and Engineering, University of Brighton, Cockcroft Building,Brighton, UK, **Faculty of Physics, Moscow State University, Vorobyovy gory, Moscow, Russia

A hybrid Lagrangian-Eulerian method for dispersed phase simulation

N.E. Stevens and J.S. ShrimptonDepartment of Mechanical Engineering, Imperial College London

Two-phase flow patterns in small diameter tubes

L. Chen*, Y. S. Tian** and T.G. Karayiannis**Division of Environmental, Energy and Building Services, Engineering, Faculty of Engineering, Scienceand the Build Environment, London South Bank University, London, UK, **Aspentech Inc., The GeminiBuilding, Fermi Avenue, Harwell International Business Centre, Didcot, Oxfordshire, UK

Gain scheduled control of gas-liquid flow through a neural network

P.R. Barbosa and P. Seleghim JrThermal and Fluids Engineering Laboratory, University of São Paulo at São Carlos, Av. TrabalhadorSãocarlense, 400, São Carlos, Brazil

Modeling of vertical annular and wispy-annular flow

A. Laforgia, L.Y. Lao, C.J. Lawrence and G.F. HewittDepartment of Chemical Engineering and Chemical Technology, Imperial College London, Prince ConsortRoad, London, UK

A study of transient processes in a closed vessel due to injection of hot liquid sprays

J. Valha*, J.S. Lewis** and J Kubie****Westinghouse (Process Control Europe), Prague 2, Czech Republic. **Middlesex University, London,England, ***School of Engineering, Napier University, Edinburgh, Scotland

Three-phase gas-liquid-liquid flows in the steady and transient states

G.F. HewittDepartment of Chemical Engineering and Chemical Technology, Imperial College London, Prince ConsortRoad, London, UK

Vortex pairing in two-way coupled, condensed bubble laden shear layers

X.G. Yang*,***, X.B. Huang* and N. Thomas***School of Engineering & Science, University of Paisley, UK, **FRED Ltd, Aston Science Park,Birmingham, UK, ***The State Key Laboratory of Multiphase Flow, Xi'an Jiaotong University, China


Liquid re-circulation beneath a ventilated cavity in a vertical pipe

A.A. Sotiriadis and R.B. ThorpeUniversity of Surrey, Fluids Research Centre, School of Engineering, Surrey, UK

Boiling of hydrocarbons on a plate coated surface

S. Bhaumik, L. Prasad, V.K. Agarwal and S.C.GuptaDepartment of Chemical Engineering, Indian Institute of Technology Roorkee, Roorkee, India

A flow model for helical capillary tubes for refrigeration systems

H.K. Paliwal and K. KantDepartment of Mechanical Engineering, Institute of Engg. and Technology, Lucknow, India

Investigation of siphon action in a discharge duct

J.T. Kshirsagar, S. Gunaseelan, S.G. Joshi and R.K. SrivatsavaCorporate Research and Engineering Division, Kirloskar Brothers Limited, Udyog Bhavan, Tilak Road,Pune, India

Two-dimensional two-fluid simulation of LBE-Argon two-phase flows for ADS target systems

R. Chaudhary, A. Khanna, P. Satyamurthy and P. MunshiDepartment of Mechanical Engineering,Indian Institute of Technology Kanpur, India

Void-fraction imaging by rotating gamma-ray source and multiple detectors

P. Munshi, G. Biswas, S. Varshney, A.M. Quraishi, N.S. Dixit, P. Satyamurthy and N. VenkatramaniDepartment of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur , India

Laminar combined convection in vertical annulus

S. Mahto, A.P. Patil, S. Singh and M. Dubey Department of Mechanical Engineering, North Eastern Regional Institute Of Science & Technology [NERIST]Nirjuli, Arunachal Pradesh , India

Effect of attachment on fluidized bed combustion heat transfer

A.P. Patil, S. Samanta and R. AnandDepartment of Mechanical Engineering, North Eastern Regional Institute Of Science & Technology[NERIST], Nirjuli, Arunachal Pradesh , India

A method to fix the velocity and temperature fields in two-phase flow - A homogeneous model

P.K. Sarma, V. Srnivas, V. Dharmarao, T. Subramaniam, P. Sivannarayana and H. LiuCollege of Engineering, GITAM, Visakhapatnam , India

Numerical study on the dynamics of a cavitation bubble collapse in a shallow layer of liquid

M. T. Shervani-Tabar and A. Tavakkol-AghaeeDepartment of Mechanical Engineering, University of Tabriz, Tabriz, Iran

Analysis of cavitating flows - A review

K.S. SumamDepartment of Civil Engg, Govt. Engineering College, Trichur, Kerala, India


Effect of mobility ratio on oil-water displacement in a porous medium

T. SheoreyDepartment of mechanical engineering, Jabalpur Engineering College, Jabalpur, Madhya Pradesh, India

Study of condensation in a high pressure feed water heater

Y.V.G. Kartik, V. Srinivasan and V.R. RaghavanDepartment of Mechanical Engineering, Indian Institute of Technology Madras, Chennai, India

Transient natural convection with surface evaporation in a partially filled tanks

S. Prasanth Kumar*, B.V.S.S.S. Prasad*, , G. Venkatarathnam*, S. Srinivasamurthy* and K. Ramamurthi***Department of Mechanical Engineering, IIT Madras, Chennai-600036, India, **LPSC, ISRO, Valiamala,Kerala, India

Role of CFD techniques in discriminating experimental solids concentration data in stirredsuspensions and modelling of the solids concentration profiles in a pilot reactor

G. Montante, D. Fajner, F, Orlandini and F. MagelliDipartimento di Ingegneria Chimica, Mineraria e delle Tecnologie Ambientali, Università di Bologna, vialeRisorgimento 2, Bologna, Italy

Fluid dynamic process simulation in a reactor for propylene polymerization

G. Penzo*, C. Saccani**, A. Bianchini** and R. Rinaldi**Basell Polyolefins, **Università degli Studi di Bologna, Italy

TpSimWin: an advanced simulation algorithm for solid-gas and solid-liquid flow

G. Amati, A. Bianchini and C. SaccaniUniversità degli Studi di Bologna

The levitation force on the core in a stationary core-annular flow through a horizontal pipe

G. Ooms and P.PoesioDelft Univ. of Technology, Delft, The Netherlands

Direct simulations of spherical particles in a linear shear flow field at low non-zero Reynolds numbers

P. Poesio and G. OomsDelft Univ. of Technology, Delft, The Netherlands

Interaction of particles with secondary flow in high Reynolds number horizontal pipe flow

J.M.C. Van 't Westende, R.J. Belt, L.M. Portela, R.F. Mudde and R.V.A. OliemansDelft Univ. of Technology, Delft, The Netherlands

Rotating sorbent reactor

E. Mondt, J.J.H. Brouwers and H.P. van KemenadeEindhoven Univ. of Technology, Eindhoven, The Netherlands

Large-eddy simulation of particle-laden channel flow

J.G.M. KuertenEindhoven Univ. of Technology, Eindhoven, The Netherlands


Particle-driven secondary flow in turbulent horizontal pipe flows

R.J. Belt, J.M.C. Van 't Westende, L.M. Portela, R.F.Mudde and R.V.A. OliemansDelft Univ. of Technology, Kramers Lab. voor Fysische Technology

Validation of the granular temperature prediction of the kinetic theory of granular flow by particleimage velocimetry and a discrete particle model

N.G. Deen, W. Dijkhuizen, G.A. Bokkers, M. van Sint Annaland and J.A.M. KuipersUniv. of Twente, Twente, The Netherlands

Effect of the porous coating on the critical heat flux temperature

S. Yildiz and G. BartschYildiz Teknik Universitesi, Makine Fakultesi, Istanbul, Turkey

Measurement of the aerodynamic forces on a small particle

C.M. Kolera, F.T.M. Nieuwstadt and J.C.R. HuntDelft Univ. of Technology, Lab. for Aero- and Hydrodynamics

Study on bubbles size distributions and three-dimensional flow pattern visualization in upwardflashing flow by means of wire-mesh sensors

A. Manera, H.M. Prasser, D. Lucas and T.H.J.J. van der HagenDelft Univ. of Technology, Delft, The Netherlands

Characterization of the interaction between turbulence and flock morphology in a flocculation process:PIV/digital imaging experiments and CFD modeling

M. Honkanen, P. Saarenrinne and J. ReunanenTampere Univ. of Techn., Tampere, Finland

Study of flow reversal phenomenon in crank-type vertical tubes

C.B. Lee, S.Y. Lee, D.W. Jeong and M.H. KimDepartment of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Science Town,Daejeon, Korea

Two-phase flow behavior inside a header connected to multiple parallel channels

J.K. Lee and S.Y. LeeDepartment of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Science Town,Daejeon, Korea

Features of two-phase gas/liquid flow at a combining T-junction - Hold up profiles around thejunction

B.J. Azzopardi*, A. Belghazi*, M. Fossa** and P. Guglielmini***Multiphase Flow Research Group, Nottingham Fuel and Energy Centre, School of Chemical, Environmentaland Mining Engineering, University of Nottingham, University Park, Nottingham NG7 2RD, U.K.**DITEC, University of Genova, Italy

The approach to stratification of a dispersed liquid-liquid flow at a sudden expansion

L. Yang, B.J. Azzopardi G. Baker, A. Belghazi and D. GiddingsMultiphase Flow Research Group, School of Chemical, Environmental and Mining Engineering, Universityof Nottingham, University Park, Nottingham NG7 2RD, U.K.


Non-stationary analysis of flow boiling in minichannel

D. Brutin and L. TadristEcole Polytechnique Universitaire de Marseille - Laboratoire I.U.S.T.I., Technopôle de Château-Gombert, 5,rue Enrico Fermi, Marseille, France

Enhancement of condensation heat transfer by using passive and active drainage techniques

D. Butrymowicz and M. TrelaInstitute of Fluid-Flow Machinery, Polish Academy of Sciences, Gen. J. Fiszera 14, Gdansk, Poland

Numerical calculation of critical mass flow rate in capillary tubes

D. Fuentes*,**, J.M. Corberán* and A. Pérez-Navarro**Applied Thermodynamics Department, Universidad Politécnica de Valencia; Valencia, Camino de Vera s/n,Spain, **Mechanical Engineering School, Universidad Industrial de Santander; Bucaramanga, Colombia

Study about the flashing process through a metering expansion valve

M.A. Bahajji, J.M. Corberàn, J. Urchueguìa and J. GonzalvezInstituto de Ingenierìa Energètica, Universidad Politècnica de Valencia. Camino de Vera 14, Valencia, Spain

The evaporation of a two-phase drop in a direct-contact heat exchanger - Transient and steady-statecomputations

F. Dammel, H. Beer and P. Stephan Darmstadt University of Technology, Chair of Technical Thermodynamics , Petersenstr. 30, Darmstadt,Germany

Effect of the microscale wall topography on the thermocapillary convection within a heated liquid film

T. Gambaryan-Roisman and P. Stephan Darmstadt University of Technology, Chair of Technical Thermodynamics, Petersenstr. 30, Darmstadt,Germany

Effect of the wall microstructure on the thermocapillary convection of a heated liquid film

T. Gambaryan-Roisman Darmstadt University of Technology, Chair of Technical Thermodynamics, Petersenstr. 30, Darmstadt,Germany

Dynamic wetting angle of a spreading droplet

S. Sikalo*, C. Tropea** and E. N. Ganiç**Faculty of Mechanical Engineering, University of Sarajevo, Vilsonovo setaliste 9, Sarajevo,Bosnia/Herzegovina, **SLA, Technische Universität Darmstadt, Petersenstraße 30, Darmstadt, Germany

Detailed data on stratified annular flow in inclined pipe

G. Geraci, B.J. Azzopardi, A. Sarimeseli and H.R.E. Van MaanenMultiphase Flow research Group, Nottingham Fuel and Energy Centre,School of Chemical, Environmentaland Mining Engineering, University of Nottingham, University Park, Nottingham, UK

Direct numerical simulation of the dispersion of microbubbles in turbulent boundary layer

A. Giusti, F. Lucci and A. SoldatiUniversità di Udine, Centro Interdipartimentale di Fluidodinamica e Idraulica and Dipartimento diEnergetica eMacchine, UDINE, ITALY


Flow boiling in capillary tubes

G. Hetsroni, A. Mosyak, E. Pogrebnyak and R. RozenblitDepartment of Mechanical Engineering, Technion - Israel Institute of Technology, Haifa, Israel

Flow in the annular film around a Taylor bubble rising through vertical columns of liquid

S. Nogueira*,**, M.L. Riethmuller*, J.B.L.M. Campos** and A.M.F.R. Pinto***von Karman Institute for Fluid Dynamics, Chaussèe de Waterloo, 72, B-1640 Rhode Saint Genèse,Belgium, **Centro de Estudos de FenÛmenos de Transporte, Departamento de Eng. QuÌmica, Faculdade deEngenharia da Universidade do Porto, Rua Dr. Roberto Frias, 4200 - 465 Porto, Portugal.

Interaction between transitional structures and particles in the near-field of a round, confined jet

F. Sbrizzai*, R. Verzicco**, M.F. Pidria*, P. Faraldi* and A. Soldati**Centro interdipartimentale di Fluidodinamica e idraulica, and Dipartimento di Energetica e Macchine,Universita di Udine, Udine, Italy, **Dipartimento di Ingegneria Meccanica e Gestionale, Politecnico di Bari,Bari, Italy

On the interactions between coherent structures and particles in turbulent boundary layer

M. Picciotto, C. Marchioli, M.W. Reeks° and A. SoldatiCentro Interdipartimentale di Fluidodinamica e Idraulica and Dipartimento di Energetica e Macchine,Università di Udine, Udine, Italy, °European Joint Research Institute Institute for the Environment andSustainability, Ispra (Va) Italy

On the influence of the inlet slug length distribution - A slug flow simulator

T. Sotto Mayor, A.M.F.R. Pinto and J.B.L.M. CamposCentro de Estudos de Fenómenos de Transporte, Departamento de Engenharia Química, Faculdade deEngenharia da Universidade do Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal

Flow around individual Taylor bubbles rising in stagnant CMC solutions: PIV measurements

R.G. Sousa*, A.M.F.R. Pinto*, M.L. Riethmuller** and J.B.M.L. Campos**Departamento de Engenharia Quìmica, Centro de Estudos de Fenòmenos de Transporte, Faculdade deEngenharia da Universidade do Porto, Rua Dr. Roberto Frias, Porto, Portugal, **von Karman Institute ForFluid Dynamics, 72 Chaussée de Waterloo, Rhode-Saint-Genèse, Belgium

On the effect of flow on boiling bubble detachment

M. Kovacevic and C.W.M. van der GeldEindhoven University of Technology, Department of Mechanical Engineering, P.O.Box 513, Einhoven, TheNetherlands

The effects of plate thickness, surface tension and fluid flow on detachment of drops from a plate end

A.S. Lexmond and C.W.M. van der GeldTechnische Universiteit Eindhoven

Further investigations into the phase split at a larger diameter vertical T-junction

E. Wren, R. Kaji, R. Geary, H. Robinson, E. Cheney, N.K. Omebere-Iyari and B.J. AzzopardiMultiphase Flow Group, Nottingham Fuel and Technology Centre, The University of Nottingham,University Park, Nottingham, NG7 2RD, England.


The lift force on bubbles in a swarm: experimental analysis using LDA

A.A. Kulkarni and J.B. Joshi

Evaporation modelling in fields with strong pressure gradient-critical flashing flows in nozzles

P. Papadimitriou and T. SkorekThermal Hydraulics Division, Gesellschaft für Anlagen und Reaktorsicherheit (GRS) mbH, Garching,Germany

Data analysis for hot-film anemometry in turbulent bubbly flow

S. Luther*, J. Rensen*, D. Lohse* and J.M. Burgers***Department of Applied Physics, **Center for Fluid Dynamics, University of Twente, P.O. Box 217,Enschede, The Netherlands

Bubble aspect ratio and velocity measurements using a four-point fiber-optical probe

S. Guet*, J. Rensen*, S. Luther* and G. Ooms***Laboratory for Aero and Hydrodynamics, **Center for Fluid Dynamics, Delft University of Technology,Leeghwaterstraat 21, 2628 CB Delft, The Netherlands

Models for the forces acting on bubbles in comparison with experimental data for vertical pipe flow

D. Lucas, E. Krepper, H.-M.Prasser and J.M. ShiForschungszentrum Rossendorf e.V., P.O.Box 510 119, Dresden, Germany

Analyzing the velocity field of multiphase film flow

I. Ausner, A. Hoffmann, J.U. Repke and G. WoznyTU Berlin, Institute for Process and Plant Technology, Sekr. KWT9, Strasse des 17. Juni 135, Berlin,Germany

Simultaneous measurements of the local solid phase velocity and the local solid hold-up in athree-phase flow by an X-ray based method

U. Kertzscher, A. Seeger, K. Affeld and E. WellnhoferBiofluidmechanics Laboratory, Charité, Spandauer Damm 130, Berlin, Germany

Liquid jets expanding into a very low-pressure environment - Experimental results

M.M. Vieira and J. R. Simões-MoreiraEscola Politécnica da Universidade de São Paulo, Mechanical Engineering Department, Av. Prof. MelloMoraes, 2231, São Paulo, Brazil

Liquid jets expanding into a very low-pressure environment - Numerical solution

E. Angelo and J. R. Simões-Moreira Escola Politécnica da Universidade de São Paulo, Mechanical Engineering Department, Av. Prof. MelloMoraes, 2231, São Paulo, Brazil

Enhancement of mass transfer on single drops due to Marangoni convection

K. Schulze, M. Kraume and A. PaschedagDepartment of Chemical Engineering, technical University Berlin, Straße des 17. Juni 136, Berlin, Germany


Two-and three-phase flow computation for the optimization of oil skimming systems

G. Clauss and M.A. AmroDivision of Ocean Engineering, Technical University of Berlin, Salzufer 17-19, Berlin, Germany

Dryout of BWR fuel elements

F. ReischKTH, Royal Institute of Technology, Dept. of Energy Technology, Stockholm, Sweden

Experimental investigations of particle distributions in stirred solid/liquid systems

R. Angst and M. KraumeUniversity of Technology Berlin, Department of Chemical Engineering, MA 5-7, Straße des 17. Juni 136,Berlin, Germany

A model for two phase flow with evaporation

R. Krahl, M. Adamov, M. Lozano Avilés and E. BänschWeierstrass Institute for Applied Analysis and Stochastics, Mohrenstraße 39, Berlin, Germany

Multiple electrodes impedance sensor with a rotate applied signal for void fraction measurement

M.S. Rocha and J.R. Simões-MoreiraEscola Politécnica da Universidade de São Paulo, Mechanical Engineering Department, Av. Prof. MelloMoraes, 2231, São Paulo, Brazil

Drag and lift coefficients of single bubbles

A. TomiyamaUniversity of Kobe, Japan

Enhancement of condensation heat transfer by using passive and active drainage techniques

D. Butrymowicz and M. Trela Institute of Fluid-Flow Machinery, Gdansk,Poland

The flow of oil-water mixtures in horizontal pipes. State of the art and recent developments onpressure drop reductions and flow regime transitions

G. Sotgia* and P. Tartarini***University of Milan, **University of Modena, Italy

Small-scale and coarse-grained dynamics of interfaces : impact on two-phase flow modelling

D. LhuillierUniversité Pierre et Marie Curie, Paris, France

DNS and LES of turbulent multifluid flows

D. LakehalETH, Zurich, Switzerland

Heat transfer and crisis in swirl flow boiling

V. YagovMoskow Power Institute, Russia


Drag reduction with microbubble injection

Y. HassanTexas A&M University, USA

Simulation of subcooled nucleate boiling in a vertical annulus with coupling of bubble-tracking andtwo-fluid models

I. Kljenak, B. Koncar and B. MavkoReactor Engineering Division, Joze Stefan Institute, Jamova 39, Ljubljana, Slovenia

Modeling of condensation-induced water hammer

J. Gale, I. Tiselj and I. ParzerReactor Engineering Division, Joze Stefan Institute, Jamova 39, Ljubljana, Slovenia

Cavitating injector flow simulations within a DI diesel injector compared with experimental data

D. Greif, M. Costa, D. Wang, J. Han and A. AlajbegovicAVL List GmbH, Hans-List-Platz 1, Graz, Austria

Gas release model for a rapid decompression of an homogeneous liquid-gas mixture

M. KessalDépartement Transport et Equipement Pétrolier, Faculté de Hydrocarbures et de la Chimie, Universitéde Boumerdes, Algérie

Characterization of solid-liquid suspensions (real, large and non-spherical particles in non-Newtoniancarrier fluids) flowing in horizontal and vertical pipes

A. LegrandINRA-LGPTA, Villeneuve D'Ascq, France

Numerical simulation of water-jet-cooling process by using VOF model including phase change andconjugated heat transfer

S.I. ShimasakiUniversite Henri Poincare - Nancy 1, France

Two-phase gas-particle flow structure and heat transfer in high speed flow over a blunt body

A. Volkov*, Yu. Tsirkunov* and B. Oesterle***Baltic State University, St. Petersburg, Russia, **ESSTIN, Henri Poincaré University, Nancy, France

An anisotropic dispersion model based on a G.L.M.-like approach for turbulent shear flows

O. Caballina*, A. Kheiri** and B. Oesterle***ENSEM, Institut National Polytechnique de Lorraine, Nancy, France, **ESSTIN, Henri PoincaréUniversity, Nancy, France

Modeling of anisotropic particle motion in turbulent channel flow and comparison with experiments

J.Ph. Carlier, M. Khalidj and B. OesterleLEMTA, Henri Poincaré University, Nancy, France


Improvement of the formulation of the dispersed phase boundary conditions for a rough wall neededin two-fluid models

M. Khalidj*, B. Arcen* and A. Tanière***ESSTIN, Nancy, France, **LEMTA, Nancy, France

Stability of Shear Flows in bubbly fluids

N. ChikhiLaboratoire de Modélisation en Mécanique et Thermodynamique, Normandie-Niemen, France

Experimental study on two-phase pressure drop and void fraction in the U-bend region of a steamgenerator mock-up

E. DecossinEDF R&D / MFTT, Département Mécanique des Fluides et Transferts Thermiques, Chatou, France

Assessment and uncertainty evaluation for the CATHARE 3-dimensional module

I. Dor and J. DufrêneCEA-Grenoble,DEN/DTP/SMTH/LMDS, GRENOBLE, France

Foam drainage characterization by using impedance methods

B. Fournel*, H. Lemonnier** and J. Pouvreau***DEN/DTCD/SPDE, CEA/Perrelatte, France, **DEN/DER/SSTH, CEA/Grenoble, France

Periodic travelling waves of finite amplitude in two-layer flow

A. BoudlalLML-URA CNRS 8107,Villeneuve d'Ascq, France

Non maxwellian behavior in sedimentation

C. Bounhoure, Y. Brunet and A. MerlenBat M3, Mécanique, Université de Lille1, Villeneuve d'ascq,France

Heat and mass transfer of an evaporating sessile drop: an experimental and numerical investigation

L. Grandas, R. Santini, L. Tadrist and D. VeyretEcole Polytechnique Universitaire de Marseille - Laboratoire IUSTI - CNRS, Université de Provence,Marseille, France

Numerical simulations of a bubbly flow in a sudden-expansion with the Neptune code

C. Morel*, J. Pouvreau*, J. Laviéville** and M. Boucker***CEA Grenoble, DEN/DTP/SMTH/LMDS, Grenoble, France, **EDF - R&D, Chatou, France

Evaporation of falling water sheet on a horizontal cylinder: modelling and experimentation

H. Louahlia-Gualous, L. El Omari, E. Artioukhine and P.K. PandayCentre de Recherche sur les Ecoulements, Surface et Transfert, Laboratoire mixte UTBM-UFC, UMR CNRS,Belfort, France


Experimental study of the onset of the 3D oscillatory thermocapillary convection around a single air orvapor bubble. Influence on heat transfer

C. Reynard, M. Barthès, R. Santini and L. TadristEcole Polytechnique Universitaire de Marseille - Laboratoire IUSTI - CNRS, Université de Provence,Marseille, France

Direct simulation of rigid fibers in viscous fluid

A. Megally, P. Laure and T. CoupezINLN, Nice, France

Coupling between instantaneous liquid flow rate and transient air entrainment for GDI sprays

G. Delay*, R. Bazile*, G. Charnay* and H.J. Nuglisch***IMFT, Toulouse, France, **SIEMENS VDO Automotive, Toulouse, France

Dispersed phase measurements in sprays using optical probes

A. CartellierLEGI, INPG-BP53, Grenoble, France

Flashing liquid fragmentation: is there a hindered mass?

J.P. BigotENSMSE, St.Etienne, France

Modelling of the ignition inside a turbojet combustor. Application to in-flight relight

N. OuartiONERA Toulouse Center, Toulouse, France

One-dimensional turbulence model for 2-phase flows calculated in system code

G. SerreCEA/grenoble, DEN/DTP/SMTH/LMDS, Grenoble, France

Interfacial instabilities in inclined liquid films at high pressures

M.J.F. Ferreira and J.R.F. Guedes de Carvalho Departamento de Engenharia Química, Faculdade de Engenharia da Universidade do Porto, Porto, Portugal

Signs of flooding instability and mass transfer in high density gas slugs

M.J.F. Ferreira and J.R.F. Guedes de Carvalho Departamento de Engenharia Química, Faculdade de Engenharia da Universidade do Porto, Porto, Portugal

An experimental investigation on the relative roles of energy input, surface tension and viscosity on thebreak-up of a liquid drop

J.P. Monteiro, M.G. Rasteiro and J. M. BarataDep. Engenharia Electromecânica, Universidade da Beira Interior, Covilhã, Portugal


Transient effect of bubble contamination on the drag coefficient and on the gas-liquid mass transfer:an experimental study

S.P. Orvalho, J.M.T. Vasconcelos and Sebastiao AlvesCentro de Eng. Biologica e Quimica, Dept. of Chemical Engineering, 001 Lisboa, Portugal

Finite size coupling for Euler/Lagrange calculations of two-phase flows

E. Bourloutski, A. Hoelzer and M. SommerfeldMLU Halle, Germany

Use of fibre optical probes for on-line monitoring of multi-phase flow in a novel oscillatorymeso-reactor

N. Reis, A.A. Vicente, J.A. Teixeira and M.R. MackleyUniv. Minho, Braga, Portugal

Study of hydrodynamics and mixing in an airlift reactor with an enlarged separator using magnetictracer method

J. Klein, A.A. Vicente and J.A. TeixeiraUniv. Minho, Braga, Portugal

Measurement of droplet movement at wet steam

J. Novotni, L. Nováková and J. NozickaCzech. Tech. Univ. Praha, Czech Republic

Characteristics of two-phase flow inside mixing chamber of en effervescent atomizer

J. Jedelsk_, J. Katolick_ and M. JíchaBrno Univ. Technol., Brno, Czech Republic

Numerical solution of transonic flow of condensing steam

J. Fo_t and J. HalamaCzech. Tech. Univ. Praha, Czech Republic

Bubble formation: high speed images and acoustic signals

R. Bungani_, M.C. Ruzicka, J. Drahos and K. WichterleInst. Chem. Proc. Fundam AS CR, Praha, Czech Republic

Pressure drop for creeping flow through an axisymmetric sudden contraction

V.G. Pienaar and P.T. SlatterFlow Process Research Centre, Cape Technikon, South Africa

Flow through a 4:1 contraction: comparison of experimental and numerical investigations at lowReynolds numbers

P.T. Slatter and V.G. PienaarFlow Process Research Centre, Cape Technikon, South Africa


A kinetic energy correction factor for the laminar pipe flow of viscoplastic fluids

M.M. Baudouin, V.G. Pienaar and P.T. SlatterFlow Process Research Centre, Cape Technikon, South Africa

Simulation of evaporative cooling of droplets in a mechanical draft cooling tower

S.P. Fisenko, A.A. Brin and A.I. PetruchikA.V. Luikov Heat & Mass Transfer Institute, National Academy of Sciences of Belarus, 15, P. Brovka St.,Minsk, Belarus

The impact of the liquid-vapour equilibrium on the coefficient of performance of an absorption chiller

N. Chekir and A. BellagiU.R. Thermique & thermodynamique des procedes, TthP, Ecole Nationale d'Ingenieurs de Monastir

An experimental study of heat transfer between horizontal immersed tubes without and with annularfins of constant thickness in bubbling fluidized bed

S. Rasouli*, M. Reza Golriz**, A. Asghar Hamidi****Engineering Faculty, Azad University, Tehran, Iran, **Department of Applied Physics and Electronics ,Umea University, Sweden, ***Department of Chemical Engineering, Tehran University, Tehran, Iran

Influence of sub-cooled boiling on out of-phase oscillations in boiling water reactors

L. Muñoz-Cobo*, S. Chiva** and A. Escrivá**Departament of Chemical and Nuclear Engineering, Universidad Politécnica, Camino de Vera 14, Valencia,**Departamento de Tecnología, Universidad Jaime I, Castellon, Spain

Steam condensation on finned tubes, in presence of non-condensable gases and aerosols: influence ofimpaction, diffusiophoresis and settling on aerosol deposition

J.L. Muñoz-Cobo*,****, J. Peña**, L.E. Herranz*** and A. Pérez-Navarro*****Polytechnic University of Valencia. Department of Chemical and Nuclear Engineering, **Department ofapplied Mathematics, Universidad Politécnica, ***CIEMAT, Department of Nuclear Fission, Madrid.****Instituto de Ingeniería Energética, Universidad Politécnica, Spain

Contribution to predicted the rise velocity of single gas slugs in stagnant liquid. Influence of liquidviscosity and tube diameter

M.A.R. TalaiaPhysics Department, University of Aveiro, Aveiro, Portugal

A conservative scheme for the study of multi-dimensional two-fluid flow problems

J.R. García-Cascales and H. PaillèreUniversidad Politécnica de Cartagena, Spain

Implicit AUSM scheme for the analysis of two-fluid flow problems

J.R. García-Cascales and H. PaillèreUniversidad Politécnica de Cartagena, Spain

Numerical analysis of two-phase flow in condensers and evaporators with special emphasis on singlephase - two-phase transitions zones

S. Morales, J. Rigola, C.D. Pérez-Segarra and A. OlivaCentre Tecnològic de Transferència de Calor CTTC, Universitat Politècnica de Catalunya, Spain


Experimental analysis of two-phase flow in evaporators with special emphasis on single phase -two-phase transitions zones

G. Raush, J. Rigola, S. Morales, C.D. Pérez-Segarra and A. OlivaCentre Tecnològic de Transferència de Calor CTTC, Universitat Politècnica de Catalunya, Spain

Performance of an air-cooled, falling film absorber of an ammonia-water absorption cooling machine

J. Castro, L. Leal, P. Pozo and A. OlivaCentre Tecnològic de Transferència de Calor CTTC, Universitat Politècnica de Catalunya, Spain

Verification and validation of volume of fluid methods

L. Leal, J. Castro, P. Pozo and A. OlivaCentre Tecnològic de Transferència de Calor CTTC, Universitat Politècnica de Catalunya, Spain

Numerical simulation of particle-laden compound jet by vortex method

T. Uchiyama, A. Fukase and K. MinemuraGraduate School of Information Science, Nagoya University, Nagoya, Japan

Enhancement of heat transfer in subcooled flow boiling with microbubble emission

K. Suzuki, T. Kokubu, H. Kawamura, H. Shida and O. OgawaDepartment of Mechanical Engineering, Tokyo University of Science, Japan

Flow characteristics around and drag of obstacle in vertical upward gas-liquid bubbly pipe flow

T. Shakouchi, T. Nakamura, A. Voutinas and J. KawaguchiGraduate School of Engineering, Mie University, Mie, Japan

Characteristics of microbubble drag reduction on a 50 m-long flat plate

Y. Kodama, T. Takahashi, T. Hori, M. Makino, and T. UedaCenter for Smart Control of Turbulence, National Maritime Research Institute, Tokyo, Japan

Experimental research on the correlations of void fraction and frictional pressure drop in capillaryrectangular channels

H. Ide and T. FukanoDept. of Mechanical Engineering, Faculty of Engineering Kagoshima University, Kagoshima, Japan

Turbulence modification in bubbly upward pipe flow (extraction of microscopic turbulent structure byhigh speed time-resolved PIV)

K. Yoshimura*, D. Minato*, T. Tanaka**, Y. Sato* and K. HishidaDepartment of System Design Engineering, Keio University, Yokohama, Japan

Prediction of performance and flow behavior of steam ejector using computational fluid dynamicstechnique

K. Pianthong, K. Chunnanond, S. Aphornratana and M. BehniaDepartment of Mechanical Engineering, Faculty of Engineering, Warinchamrab Ubon Ratchathani, Thailand


Optical measurements of velocity gradient in the near-wall region of microbubble-laden turbulentchannel flow

Y. Saitoh and K. HishidaDepartment of System Design Engineering, Keio University, Yokohama, Japan

Bubble behavior and coalescence condition of two bubbles rising side by sice

T. Sanada, M. Watanabe and T. FukanoDepartment of Mechanical Engineering Science, Graduate School of Engineering, Kyushu University,Fukuoka, Japan

Bouncing and coalescence of single bubble approaching to free surface

T. Sanada, M. Watanabe and T. FukanoDepartment of Mechanical Engineering Science, Graduate School of Engineering, Kyushu University,Fukuoka, Japan

Numerical analysis of bubbly flows in a Laval nozzle based on a two-fluid and three-pressure model

R. Egashira, T. Yano and S. FujikawaDivision of Mechanical Science, Graduate School of Engineering, Hokkaido University, Sapporo, Japan

Uniform distribution conditions of two-phase flow in horizontal header to vertical branch pipes withhorizontal entrance connections

S. Horiki and M. OsakabeTokyo University of Marine Science & Technology, Tokyo, Japan

Estimation of two-phase flow quality with pressure difference oscillation

M. Osakabe and S. Horiki Tokyo University of Marine Science & Technology, Tokyo, Japan

Turbulent structure in a turbulent boundary layer with microbubbles

M. Hamada and H. KatoDepartment of Mechanical Engineering, Graduate School of Engineering, Toyo University, Kawagoe, Japan

Numerical simulation of segregation in fluidized bed using discrete element method and theexperimental verification

Z. Liu, T. Hirata, T. Kawaguchi, T. Tanaka and Y. TsujiThermal & Fluid Technology Dept. Technical Research Laboratory, Ishikawajima-Harima Heavy IndustriesCo., Ltd. Yokohama, Japan

Behavior of bubble departure in the direct-contact boiling field with a continuous liquid-liquidinterface

K. KadoguchiInstitute for Energy Utilization, Tsukuba, Japan

Rotating filtration with Taylor-Couette vortex flow for particle-liquid separation

H. Kawai, H. Takahashi and A. SuzukiMuroran Institute of Technology, Muroran, Japan


Modeling of bubbly flow turbulence based on bubble boundary layers

M. Nakagawa, M. Aritomi and M. MoriDepartment of Mechanical Sciences and Engineering, Graduate School of Science and Engineering, TokyoInstitute of Technology, Tokyo, Japan

Particle dynamics simulation - Modeling and application to multiphase cavity flow

K. Nagayama and K. TanakaDept.of Mech. Systems Eng., Kyusyu Institute of Technology, Hukuoka, Japan

The bubble clustering phenomena near the wall in a turbulent bubbly flow

T. Ogasawara, Y. Tagawa, A. Fujiwara, S. Takagi and Y. MatsumotoDept. of Mechanical Engineering, The University of Tokyo, Tokyo, Japan

A numerical study on detail flow structure and mass transfer in bubbly plumes

X. Gong, S. Takagi and Y. MatsumotoDept. of Mechanical Engineering, The University of Tokyo, Tokyo, Japan

Bubble breakup by pressure wave in bubbly flow

A. Fujiwara, K. Watanabe, S. Takagi and Y. MatsumotoDept. of Mechanical Engineering, The University of Tokyo, Tokyo, Japan

Fluctuation phenomenon of two-phase flow through a vertical pipe with contraction

Y. Morimoto, H. Madarame and K. OkamotoThe University of Tokyo Nuclear Engineering Research Laboratory, Ibaraki, Japan

Numerical analysis for bubbly flows through a convergent-divergent nozzle

K. Okita, S. Takagi and Y. MatsumotoInteligent Modeling Laboratory, The University of Tokyo, Tokyo, Japan

Measurements of interfacial area concentration in liquid-metal two-phase flow

Y. Saito, K. Mishima, Y. Tobita, T. Suzuki and M. MatsubayashiResearch Reactor Institute, Kyoto University, Osaka, Japan

Two-phase phase distribution effect on drift-flux parameters in a vertical large diameter pipe

X. Shen, Y. Saito, K. Mishima and H. NakamuraResearch Reactor Institute, Kyoto University, Osaka, Japan

Numerical investigation of acoustic radiation force on spherical particle

S. Ebara, T. Yokomine and A. ShimizuDivision of Energy Engineering and Science, Interdisciplinary Graduate School of Engineering Sciences,Kyushu University, Fukuoka, Japan

On the accuracy of gas-liquid flow measurement using wire mesh sensor

W. Wangjiraniran, H. Kikura and M. AritomiResearch Laboratory for Nuclear Reactor, Tokyo Institute of Technology, Tokyo, Japan.


Pressure drop for gas-liquid two-phase flow in microchannels - Effects of channel size and liquidproperties

A. Kawahara, M. Sadatomi, K. Okayama and K. KanoDept. of Mechanical Engineering and Materials Science, Kumamoto University, Kumamoto City, Japan

Burning processes of polyethylene terephthalate resin powder in a high temperature oxidizingatmosphere

R. Yamakita, K. Miura, Y. Ishino and N. OhiwaGraduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan

Void fraction measurement for gas-liquid two phase flow of magnetic fluid

H. Yamaguchi and T. KuwaharaDepartment of Mechanical Engineering, Doshisha University, Kyoto, Japan

Bubble rise characteristics after the departure from a nucleation site in water saturated flow boiling

T. Okawa, T. Ishida, Isao K. and M. MoriDepartment of Mechanophysics Engineering, Osaka University, Osaka, Japan

High heat flux cooling by forced convective boiling in narrow channels

Y. Shinmoto, T. Ohno, H. Ohta, O. Ogawa and H. ShidaDepartment of Aeronautics and Astronautics, Kyushu University, Fukuoka, Japan

Numerical simulation of unsteady cavtating vortex flow in submerged water jet

G. Peng and S. FujikawaDepartment of Mechanical Systems Engineering, Faculty of Engineering, Toyama Prefecture University,Toyama, Japan

Prediction of void fraction distribution for turbulent bubble flow in a vertical pipe with suddenexpansion

K. Kondo, K. Yoshida, T.o Okawa and I. KataokaMarine Technical College, Hyogo, Japan

Boiling condition on the oxide metal under gamma ray irradiating condition

Y. Imai, K. Okamoto, H. Madarame and T. TakamasaUniversity of Tokyo, Department of Quantum Engineering and Systems Science, Tokyo, Japan

Numerical simulation of bubble-laden plane mixing layer by vortex in cell method

T. Uchiyama and T. DegawaGraduate School of Information Science, Nagoya University, Nagoya, Japan

Radiation-induced surface activation and hydrophilicity

M. Furuya, T. Matsumura, Y. Honjo, T.Takamasa, K.Okamoto and Y. ImaiCentral Research Institute of Electric Power Industry, Tokyo, Japan


Application of ultrasonic Doppler method for bubbly flow measurement using two ultrasonicfrequencies

H. Murakawa, H. Kikura and M. AritomiResearch Laboratory for Nuclear Reactors, Tokyo Institute of Technology, Tokyo, Japan

Studies of flow characteristics affected by two-phase jet flow in aeration tank

K. Ode, K. Yoshida and I. KataokaDepartment of Mechanophysics Eng., Graduate School of Eng. Osaka University, Osaka, Japan

Numerical simulation of the motion of plastic particles in a jig separator

K. Asakura and M. MizunoEnvironmental Protection Systems Engineering, Hokkaido University, Sapporo, Hokkaido, Japan

Studies on dynamic interaction between gas and liquid flows through interfacial waves in verticalupward annular flow

K. Yoshida, T. Matsumoto and I. KataokaDepartment of Mechanophysics Engineering, Graduate School of Engineering, Osaka University, Osaka, Japan

Modification of shear stress in Taylor-Couette flow containing bubbles

Y. Murai, H. Oiwa, Y. Takeda, and F. YamamotoDiv. Mech. Sci., Graduate Sch. Eng., Hokkaido University, Sapporo, Japan,

Effect of bubble size on a bubble plume

A. Tomiyama, S. Yoshida, I. Zun and A. SouFaculty of Engineering, Kobe University, Kobe, Japan

A simple method for predicting fluctuating bubble motion

A. Tomiyama, K. Sakoda and A. SouFaculty of Engineering, Kobe University, Kobe, Japan

Interaction between boundary layer flow and moving particle

A. Mori, Y. Murakami, Y. Kobayashi, K. Hirose and M. FujieDepartment of Engineering, Hokkaido University, Sapporo, Japan

Gas driven circulation enhancement in an adiabatic air-water loop

M. De Salve, M. Malandrone and B. PanellaPolitecnico di Torino, Italy

Local two-phase flow measurements with advanced data processing methods in bubbly plumes

R. Zboray, M. Simiano and F. de CachardPaul Scherrer Institute, Villigen, Switzerland

Two-phase liquid-liquid flows in pipes of small diameters

A. Wegmann and P. von RohrETH, Zürich, Switzerland


Two-phase flow characteristics in gas-liquid microreactors

S. Waelchli and P. von RohrETH, Zürich, Switzerland

The effect of the structural evolution of snow on heat transfer

TH. U. Kaempfer, S.A. Sokratov and M. ScheebeliWSL, Davos, Switzerland

Modeling of thermosolutal convection in a rectangular enclosure during solidification of a binary alloy(e.g. Al with 7%Si)

A. Djimli, M. Kadja and R. BessaihDepartment of Mechanical Engineering, University of Constantine, Route de Ain-el-Bey, Constantine, Algeria

Simulation of two-phase flows using a multiple-size group model

A. KumbaroCEA Saclay, Gif-sur-Yvette, France

Analysis of laminar film condensation from vapor-gas mixtures in vertical tubes

M.K. Groff, S.J. Ormiston, and H.M. SolimanDepartment of Mechanical and Industrial Engineering, University of Manitoba, Winnipeg, Manitoba, Canada

Analytical prediction of single and dual two-phase discharges from stratified regions

J.T. Bartley, H.M. Soliman, and G.E. SimsDepartment of Mechanical and Industrial Engineering, University of Manitoba, Winnipeg, Manitoba, Canada

Modeling and simulationg of three-dimensional two-phase flows using finite elements and globalLagrange multipliers

C. Diaz-Goano*, P. Minev** and K. Nandakumar**Dept. of Chemical and Materials Engineering, **Dept. of Mathematical and Statistical Sciences, Universityof Alberta, Edmonton, Alberta, Canada

Theoretical analysis and experimental study of pressure drop in the evaporator of the McGill heat pipe

H. Zhao, F. Mucciardi and J. GruzleskiDepartment of Mining, Metals and Materials Engineering, McGill University,3610 University, Montreal,Quebec, Canada

Liquid turbulence measurements of gas-liquid bubbly flow in large diameter vertical pipe

M.E. Shawkat, C.Y. Ching and M. ShoukriDept. of Mechanical Engineering, McMaster University, Hamilton, Canada

A new model for the pressure recovery of air-oil two-phase flow across a sudden expansion

W.H. Ahmed, C.Y.Ching and M. ShoukriDept. of Mechanical Engineering, McMaster University, Hamilton, Canada


A simple two-phase frictional multiplier calculation method

M.M. Awad, T. Johansen and Y. S. MuzychkaFaculty of Engineering and Applied Science, Memorial University of Newfoundland, St. John's,Newfoundland, Canada

Population balance simulations in bubble column reactors

S. Bove, T. Solberg and B.H. HjertagerAalborg University Esbjerg, Chemical Engineering Laboratory, Group of Chemical Fluid Flow Processes,Niesl Bohr vej 8, Esbjerg, Denmark

Mathematical modelling of coagulation processes in rotating systems

M. Breitlingand and M. PiescheUniversity of Stuttgart, Institute of Mechanical Process Engineering. Böblinger Str. 72, Stuttgart, Germany

Prediction performance of a thermodynamically consistent turbulence modulation model formultiphase flows

M. Chrigui and A. SadikiTechnical University of Darmstadt, Institute for Energy- and Powerplant, Petersenstraße 30, Darmstadt,Germany

Multifluid modeling of the effect of inter-particle collisions in polydispersed gas-solid turbulent flows

P. Fede, G. Patino and O. SimoninInstitut de Mécanique des Fluides, UMR CNRS/INPT/UPS, Toulouse, France

Validation of Eulerian multiphase flow models for nuclear safety applications

Th. Frank, A.D. Burns and J.M. ShiANSYS CFX Germany, Staudenfeldweg 12, Otterfing, Germany

The complete formulation of transport equations for the mean and variance of particle size distributionin disperse turbulent flow

E. Gharaibah, A. Pituckchon and W. PolifkeLehrstuhl für Thermodynamik, Technische Universität München, Garching, Germany

Large eddy simulation of particle-laden vertical channel flow under consideration of a consistentmodeling of turbulence modulation

B. Groh, A. Sadiki and J. JanickaTechnical University of Darmstadt, Institute for Energy- and Powerplant, Petersenstraße 30, Darmstadt,Germany

Modelling of the interface kinetic energy transfer in turbulent bubbly flows

P.A. Haynes, O. Simonin and A. GuelfiInstitut de Mécanique des Fluides, Avenue du professeur Camille Soula, F-31400 Toulouse, France

New method in numerical modelling of electric wet painting

M. Horn, H.J. Schmid, E.P. Stephan and M. MaischakUniversität Erlangen-Nürnberg, Particle Technology Group, Cauerstraße 4, Erlangen, Germany


Comparative analysis of CFD models for fluidised beds; particle models, solver and experimentalvalidation

K. Johansson, B.G.M. van Wachem and A.E. AlmstedtDepartment of Thermo and Fluid Dynamics, Chalmers University of Technology, Gothenburg, Sweden

CFD modelling of a rectangular bubble column

E. KrepperForschungszentrum Rossendorf e.V., Institut für Sicherheitsforschung, Dresden, Germany

Finite element simulation of two-phase flows in gas-liquid reactors

D. Kuzmin and S. TurekUniversity of Dortmund, LS III, Institute of Applied Mathematics, Vogelpothsweg 87, Dortmund, Germany

Influence of the model bubble diameter on three-dimensional numerical simulations of thermalcavitation in pipe elbows

E. LaurienUniversity of Stuttgart, Institute for Nuclear Technology and Energy Systems (IKE), Pfaffenwaldring 31,Stuttgart, Germany

Air-water flow in a vertical pipe with sudden changes of the superficial water velocity

H.M. Prasser and E. KrepperForschungszentrum Rossendorf e.V., Institut für Sicherheitsforschung, Dresden, Germany

Deposition of particles in laminar tube flow under the influence of thermophoretical and electricalforces

L. Reime and D. MewesUniversity of Hannover, Institute of Process Engineering, Callinstraße 36, Hannover, Germany

Eulerian multiphase modeling of feed injection and vaporisation in FCC riser reactor

C. Saulnier, O. Simonin and D. VédrineInstitut de Mécanique des Fluides, Allée du professeur Camille Soula, Toulouse, France

Forces between two spheres at low Reynolds numbers

S. Vargas and W.J. EassonSchool of Engineering and Electronics, The University of Edinburgh, The King's Buildings, Edinburgh,Scotland, UK

Statistical models of particle dispersion and preferential concentration in turbulent flows

L.I. Zaichik and V.M. AlipchenkovInstitute for High Temperatures of the RAS, Krasnokazarmennaya 17a, Moscow, Russia

Measurement of bubble sizes, velocity profiles and turbulent diffusion coefficients of the gaseous phasein a rectangular bubble column using image processing

A.Zaruba, H.M. Prasser and E. SchleicherForschungszentrum Rossendorf e.V., Institut für Sicherheitsforschung, Dresden, Germany


Comparison of different types of fluidization with the use of videogrammetr

S. Anweiler and R. UlbrichtTechnical University, Opole, Poland

Measurements of gas-liquid flow in bubble column using image processing method

D. Zajac and R. UlbrichtTechnical University, Opole, Poland

Measurement of particle velocity in a free stream by means of a modulated laser beam

P. Mirek, J. Pisarek and W. NowakTechnical University, Czestochowa, Poland

Mass transport enhancement in turbulent dispersed media

L. Broniarz-Press and V. PressPoznan University of Technology, Poland

Power consumption for suspending in the stirrer tank equipped with various baffles

L. Broniarz-Press, A. Trybus and J. BorowskiPoznan University of Technology, Poland

Studies on the drag reducing by the mixtures of polymer/surfactant solutions

L. Broniarz-Press and I. PótorakPoznan University of Technology, Poland

Shear-thinning fluids flow in fixed and fluidised beds

L. Broniarz-Press, P. Agacinski and J. RózanskiPoznan University of Technology, Poland

Gas hold-up and power input in agitated gas-liquid system in a tank

L. Broniarz-Press, W. Szaferski and M. SypulaPoznan University of Technology, Poland

Boiling heat transfer on enhanced carbon fibre reinforced microcoating

T. OrzechowskiKielce University of Technology, Poland

Boiling heat transfer hysteresis on horizontal flat and cylindrical developed micro-surfaces

T. WójcikKielce University of Technology, Poland

Boiling heat transfer enhancement on fin arrays with extended micro surfaces

R. Pastuszko, M. Poniewski and P. MroczekKielce University of Technology, Poland


Flow boiling incipience in minichannels

M. Piasecka and M. PoniewskiKielce University of Technology, Poland

Liquid phase backmixing around the loop of the inverse fluidized bed airlift column

B. Kawalec-Pietrenko and M. LazarczykGdansk University of Technology, Poland

Liquid phase mixing in the loop-type column reactor

B. Kawalec-PietrenkoGdansk University of Technology, Poland

The CFD modelling of the turbulent liquid-liquid flow in a Kenics mixer

Z. Jaworski and P. Pianko-OprychSzczecin Technical University, Poland

Thermal design of a condenser operating under mixed flow regime on the two-phase side

T. SkiepkoBialystok Technical University, Poland

Analytical-numerical model of nucleate boiling on developed micro-surfaces with tunnels

M. Koziol and M. PoniewskiKielce University of Technology, Poland

Impact of heating surface spatial orientation and mesh covering thickness on the boiling curve shape

K. Wczesniak and M. PoniewskiKielce University of Technology, Poland

Two-phase flow in a stirred tank - A numerical and experimental study

C.H. Blomgren, X.Y. Tu, C. Trägårdh and L. FuchsDivision of Fluid Mech., Dept. of Heat & Power Eng., Division of Food Eng., Lund University, Sweden

Measurements of velocity, turbulence and phase fractions in horizontal two-phase oil-water flow

G. Elseth*, H. Kvandal* and M.C. Melaaen***Norsk Hydro Oil & Energy , **Telemark University College, Norway

Isokinetic sampling in large scale high-pressure two-phase flow

P. Hedne and P. FuchsStatoil Research Centre, Trodheim, Norway

Online measurements of droplet characteristics in a flowing crude oil/water system

H. Aakre, T. Solbakken and R.B. SchüllerR&D Centre, Norsk Hydro ASA, Advisor Multiphase Flow, Norsk Hydro ASA, Agricultural univ. Norway


Estimation of fiber orientation distribution in accelerating channel flow

H. Eloranta, P. Saarenrinne and T. PärssinenTampere Univ. Of Technology, Energy and Process Engineering, P.O.Box 589, Tampere, Finland

A post-processing algorithm accounting for velocity bias and concentration fluctuations in two-phaseflow applications of a phase Doppler particle analyzer

T. Bergenblock and B. LecknerChalmers University of Technology, Dept. of Energy Conversion, Göteborg, Sweden

An experimental study of downward directed two phase flow

P. AnderssonInstitute for Energy Technology P.O.Box 40, Kjeller, Norway

Integral properties of stratified multiphase pipe flow

P.A. Berthelsen, G. Chupin, O.J. Nydal and T. Ytrehus The Fluids Engineering Group, Department of Energy and Process Engineering, Norway

Experimental results of pressure drop of single phase and air-water mixture in 24-rod SVEA-96mock-up fuel bundle

D. Caraghiaur and W. FridDivision of Nuclear Reactor Technology Department of Energy Technology Royal Institute of Technology,Stockholm, Sweden

Minor design details affect three-phase mass flow rate through chokes

S.J. Munaweera, T. Solbakken and R.B. SchüllerNorsk Hydro Oil and Energy research Centre, Porsgrunn, Norway

Comparative analysis of CFD models for fluidized beds; particle models, solver and experimentalvalidation.

K. Johansson, B. G. M. van Wachem, and A.E. AlmstedtThermo and Fluid Dynamics, Chalmers University of Technology, Gothenburg, Sweden

Quenching boiling heat transfer of a heated sphere in nanofluid

H.S. Park, D. Shiferaw, D.K. Kim, and B.R. SehgalDepartment of Material Chemistry, Royal Institute of Technology, Stockholm, Sweden

Numerical simulation of two-phase flows using a volume-of-fluids model with various interfacereconstruction schemes

L. Wang and B. SundenDivision of Heat Transfer, Lund Institute of Technology, Lund, Sweden

Using geometrical automata to develop constitutive lows in bubbly flows

V. Herrero*, G. Venere** and A. Clausse***Ejército argentino - CNEA, Av. Del Libertador 8250, Buenos Aires, Argentina, **CNEA-CONICET,Universidad Nacional del Centro, Tandil, Argentina


Heater aspect ratio effects on pool boiling heat transfer under varying gravity conditions

C. Henry, J. Kim, and B. ChamberlainUniversity of Maryland, USA

Effects of an applied magnetic field on the bubble growth and departure in a magnetic liquid

F.D. Stoian*,***, G. Pop*,***, D. Bica****,***, V. Stoica1a***, O. Marinic**,***, and L. Vékás****,****Department of Thermal Machines & Transport, **Institute for Complex Fluids and ***National Center forEngineering of Systems with Complex Fluids, Politehnica University of Timisoara, 1 Mihai Viteazu Bv.,Timisoara, Romania, ****Laboratory of Magnetic Liquids, Center of Fundamental and Advanced TechnicalResearches, Romanian Academy - Timisoara Branch, 24 Mihai Viteazu Bv., Timisoara, Romania

Nodalisation qualification in preparation of counterpart test analysis

M. Cherubini, F. D'Auria and G. GalassiDIMNP Università di Pisa, Via Diotisalvi, 2, Pisa, Italy

Simultaneous convective heat and mass transfer during gas bubble dissolution in an alternatingelectric field

T. Elperin*, A. Fominykh* and Z. Orenbakh***Dept of Mechanical Engineering, Ben-Gurion University of the Negev, Israel, **Negev Academic College ofEngineering, Beer Sheva 84100, Israel

Experimental study on combined natural and gas-injection enhanced circulation

W. Ambrosini, G. Forasassi, N. Forgione, F. Oriolo and M. TarantinoUniversità di Pisa, Dipartimento di Ingegneria Meccanica, Nucleare e della ProduzioneVia Diotisalvi, Pisa, Italy

Flow and heat transfer properties of ice slurries in a vertical rectangular channel

E. Stamatiou and M. KawajiDepartment of Chemical Engineering and Applied Chemistry, University of Toronto, 200 College St.Toronto, Ontario, Canada

A dynamic model for pool boiling heat transfer on enhanced surfaces with sub-surfaces channels

Chen, Groll and MertzIKE, Stuttgart, Germany

Demonstration of the heat removing capabilities of the EPR core catcher

Fischer, Herbst and SchmidtFramatome, Erlangen, Germany

Experimental investigation of two-phase flow patterns and temperature distributions during boiling ina micro structured reactor/heat-exchanger

Freund, Pfender and MertenInstitut for Chemical Process Engineering, Stuttgart, Germany

DNS of condensing stratified flow

Fulgosi, Lakehal and YadigarogluInstitute of Energy Technology, ETH, Zürich, Switzerland


Numerical study on bubble train flow in a square vertical mini-channel: Influence of liquid sluglength

Ghidersa, Wörner and CacuciForschungszentrum Karlsruhe, Germany

Considering bubble size distributions in CFD simulations using a moment method

Jeschke, Gnotke and LothEuR, TU-Darmstadt, Germany

Structure and dynamics of the wake and shape of singulas air bubbles freely rising in quiscent waterand their relevance for bubble paths

Heinzel, Jianu and SauterForschungszentrum Karlsruhe, Germany

Compact gas-liquid phase separators for the use in solar-thermal power plants

HirschDeutsches Zentrum für Luft- und Raumfahrt, Stuttgart, Germany

Hydraulic properties estimation and uncertainty in using them to calculate the rate of flow incompressed air tunnelling

Chinkulkijniwat, Semprich and ScheidInstitute for Soil Mechanic and Foundation Engineering, Graz, Austria

Flow boiling heat transfer in a vertical narrow channel

Shuai, Kulenovic, Sobierska, Mertz and GrollIKE, Stuttgart, Germany

Dispersion in bubble columns with and without mass transfer

Wiemann and MewesInstitut of Process Engineering, Hannover, Germany

CFD simulation and comparison of numerical models for dilute gas-particle flow over a backwardfacing step

Z.F. Tian, J.Y. Tu and G.H. YeohRMIT University

Modelling and evaluation of jet impingement heat transfer with phase change at a heated surface

A.J.C. King and T.T. ChandratillekeCurtin University of Technology

A unified model considering force balances on departing vapour bubbles and population balance insubcooled boiling flow

G.H. Yeoh and J.Y. TuAustralian Nuclear Science and Technology Organisation (ANSTO)


Experimental characterisation of gas-liquid flows through a globe valve

C. Alimonti and U. LuziDept. ICMMPM, University of Rome "La Sapienza", Italy

Improving multiphase flow metering performance using artificial Intelligence algorythm

C. Alimonti* and G. Falcone***University of Rome "La Sapienza", **SPE, Enterprise Oil plc

Narmax identification for the prediction of the dynamics of the vapotron effect

C. Biserni*, A. Fichera**, I.D. Guglielmino**, E. Lorenzini* and A. Pagano***Dipartimento di Ingegneria Energetica, Nucleare e del Controllo Ambientale, Università di Bologna, VialeRisorgimento 2, Bologna, Italy, **Dipartimento di Ingegneria Industriale e Meccanica, Università di Catania,Viale A. Doria 6, Catania, Italy

Rewetting of a hot vertical surface by liquid sprays

M. Casamirra*, F. Castiglia*, C. Lombardo*, L. Saraceno*, G.P. Celata** and A. Mariani***University of Palermo, Nuclear Engineering Department, Palermo; **ENEA, Institute of EnergeticThermal-Fluid Dynamics, Roma, Italy

Dividing two-phase flow in branching conduits with large diameter horizontal main pipes and lateralbranches

M. Casamirra, F. Castiglia, M. Giardina, C. Lombardo and S. Molica NardoDepartment of Nuclear Engineering, Palermo University, Palermo, Italy

Measurement of pressure gradient during two-phase flow inside multi-port mini-channels

A. Cavallini, D. Del Col, L. Doretti, M. Matkovic, L. Rossetto and C. ZilioDipartimento di Fisica Tecnica, Università di Padova, Padova, Italy

Design, experiments and RELAP5 code calculations for the PERSEO facility

R. Ferri*, A. Achilli*, G. Cattadori*, F. Bianchi** and P. Meloni***SIET S.p.A., Piacenza, Italy; **ENEA, Bologna, Italy

Computation of still asymmetrical drops on surfaces with regular roughness resorting to Wenzelequation

M. MantegnaDipartimento di Energetica del Politecnico di Milano, piazzale Leonardo da Vinci, 32, Milano, Italy

Evaluation of measurament uncertainty applied to the most important parameters characterizing theoil-water flows and the related critical flow transitions

R. Marchesi*, M.S. Mello* and S. Menegozzi***Department of Energetics, Polytechnic University of Milan, **Center for Quality of Athenaeum, PolytechnicUniversity of Milan, Italy

Flow patterns and pressure gradient in horizontal, upward inclined and vertical heavy oil-water-gasflows: experimental investigation and full-scale experiments"

A.C. Bannwart*, O.M.H. Rodriguez**, F.E. Trevisan*, F.F. Vieira* and C.H.M. de Carvalho****Faculty of Mechanical Engineering, Dept. of Petroleum Engineering, UNICAMP, Brazil, **Faculty ofMechanical Engineering, Dept. of Energy, UNICAMP, Brazil, ***PETROBRAS, CENPES/PDP/TE, Brazil


PIV-based analysis of interface forces in wavy-stratified oil-water flows

B. Pulvirenti* and G. Sotgia***Università di Bologna, Bologna, **Politecnico di Milano, Milano, Italy

Simulation of laser-induced detonation in multiphase mixtures under laser radiation

V. Emelyanov and K. VolkovDepartment of Gas and Plasma Dynamics, Baltic State Technical University, Saint Petersburg, Russia, Centrefor Research in Fire and Explosion Studies, University of Central Lancashire, UK

Device independent measurements of the viscosity of concentrated suspensions using magneticresonance imaging

R.M. Ambrosini, M.D. Mantle, L.F. Gladden, P.F. Luckham and C.J. LawrenceDepartment of Chemical Engineering, Imperial College of Science, Technology and Medicine, UK, MagneticResonance Research Centre, Department of Chemical Engineering, University of Cambridge, UK

Experimental study of convective patterns for volatile wetting films

C. Buffone and K. SefianeSchool of Engineering and Electronics, University of Edinburg, UK

Numerical study of thermocapillary convection for an evaporating liquid in heated capillary tubes

C. Buffone, K. Sefiane and R. BannacerSchool of Engineering and Electronics, University of Edinburgh, UK, Leevam-LMSC, Université de GergyPontoise, France

Theoretical prediction with PBE of phase inversion in dispersed two-phase liquid systems

B. Hu, K.K. Ioannou, O.K. Matar, G.F. Hewitt and P. AngeliDepartment of Chemical Engineering, University College London, UK, Department of Chemical Engineering,Chemical Technology, Imperial College London, UK

Investigation for phase inversion in liquid-liquid dispersed system using laser-induced fluorescence

L. Liu, O.K. Matar , E.S. Perez de Ortiz and G.F. HewittDepartment of Chemical Engineering, Chemical Technology, Imperial College London, UK

Effects of numerical spray modelling in a gas turbine cleaning application

F. MundDept. of Power, Propulsion, Aerospace Engineering, Cranfield University School of Engineering, Cranfield,UK

The interaction of turbulence and inertia for small particle deposition in a 90° curved duct

Z.L. Wu and J.B. YoungHopkinson Laboratory, Engineering Department, Cambridge University, UK

Numerical modeling of transient behavior of internal liquid-vapor flows

Y.Y. Niu and M.Y. LinDept. of Mechanical Engineering,Chung Hua University,Hsinchu,Taiwan


Revisiting Lagrangian modeling approach with direct Monte Carlo method for inter-particle collisionin wall-bounded turbulent flows

C.H. Hsu and K.C. ChangDept. of Aeronautics and Astronautics,National ChengKung University,Tainan,Taiwan

Single-phase and two-phase frictional characteristics of R-410A flow in small U-type return bends

I.Y. Chen, C.C. Wang and S.Y.LinDept. of Mechanical Engineering,National Yunlin University of Science and Technology,Yunlin,Taiwan

Condensation heat transfer and pressure drop of refrigerant R-410A flow in a vertical plate heatexchanger

Y.Y. Hsieh,Y.M. Lie and T.F. LinDept. of Mechanical Engineering,National Chaio Tung University,Hsinchu,Taiwan

Gas-liquid phase distribution and void fraction measurements using the MRI

N. DaidzicNCMR , NASA-GRC, 21000 Brookpark Road , MS 110-3, Cleveland, USA

Visualization and characterization of nucleate pool boiling in aqueous surfactant solutions on acylindrical heater

J.T. Zhang, S. Vishnubhatla, and R.M. ManglikThermal-Fluids & Thermal Processing Laboratory, Department of Mechanical, Industrial and NuclearEngineering, 598 Rhodes Hall, University of Cincinnati, Cincinnati, Ohio, USA

Dynamics of bubbles and bubble clouds: structure formation in acoustic cavitation

S. Konovalova, K. Zakirov and I. AkatovDept. Of Mech. Eng. And Applied Mechanics, North Dakota State University, Fargo, USA

Experimental research on flow patterns in two-phase flow in microchannels

J.K. KeskaFluid Power and Mechanical Systems, University of Louisiana, Lafayette, USA

Dynamics of gas lift cooling in the encapsulated nuclear heat source

J.W. ParkDry Reprocess Fuel Development Team, Reactor Thermal-Hydraulic Analysis, KAERI, Yusong, Taejon,Seoul, Korea

Modeling and simulation of full-scale bubbly flows around surface ships

F.J. Moraga, D.A. Drew and R.T. LaheyCenter for Multiphase Research. Rensselaer Polytechnic Institute. Troy, New York 12180-3590. USA.

The analysis of interfacial waves

A.Yu. Galimov, D.A. Drew, F.J. Moraga and R.T. Lahey, Jr.Center for Multiphase Research, Rensselaer Polytechnic Institute, Troy, New York, USA


Modelling of Faraday waves using thermal-hydraulic computer codes

C. Frepoli and K. OhkawaWestinghouse Electric Co. Nuclear Services Division PO Box-355, Pittsburg, USA

Modeling and validation of bubble breakup in two-fluid model simulations of turbulent bubbly jets

F.J. Moraga, D.A. Drew and R.T. Lahey, Jr.Center for Multiphase Research, Rensselaer Polytechnic Institute. Troy, New York, USA

Dynamics of a bubbly turbulent boundary layer along a surface-piercing plate

A. Aliseda and J. LasherasMechanical and Aerospace Engineering Department, University of California, San Diego, La Jolla, California,USA

Nano-structure computation with coupled energy, momentum phase ordering kinetics models

V. Badalassi and S. BanerjeeDepartment of Chemical Engineering, University of California, Santa Barbara, California, USA

Modeling interfacial area density in a slurry/bubble column with a three field model of two-phase flow

S.P. Antal and R.T. Lahey, Jr. Center for Multiphase Research, Rensselaer Polytechnic Institute, Troy, NY, USA

A study of two-body forces in fluidization

B.A. Kashiwa and R.M. RauenzahnLos Alamos National Laboratory, Los Alamos, NM, USA

The modeling of gas/liquid/solid interfaces for lquid droplets on inclined surfaces

S. Vafaei* and M.Z. Podowski*,***Dept. of Mechanical, Aerospace and Nuclear Engineering, **Center for Multiphase Research, RensselaerPolytechnic Institute, Troy, NY 12180, USA

Two-phase particulate flow in curved permeable membrane systems

P. Tiwari*, S.P. Antal*,** and M.Z. Podowski*,***Department of Mechanical, Aerospace and Nuclear Engineering, **Center for Multiphase Research,Rensselaer Polytechnic Institute, Troy, NY 12180, USA

The effect of nanoparticles on Taylor-bubble motion in inclined pipes

M.Z. Podowski*,**, A. Hirsa*,**, B. Wierzbicki* and S.P. Antal*,***Dept. of Mechanical, Aerospace and Nuclear Engineering, **Center for Multiphase Research, RensselaerPolytechnic Institute, Troy, NY 12180, USA

Numerical simulation of bubble columns flows - Effect of breakup and coalescence closures

P. Chen, J. Sanyal and M.P. DudukovicChemical Reaction Engineering Laboratory, Washington University, St. Louis, MO, USA


Bubble dynamics measurements in bubble columns using four-point optical probe

J. Xue*, M. Al-Dahhan*, M.P. Dudukovic* and R.F. Mudde***Chemical Reaction Engineering Laboratory, Washington University, St. Louis, MO, USA, **KramersLaboratorium voor Fysische Technologie, Delft University of Technology, Delft, Netherlands

A model of bubble departure from Cu-Gr composite surfaces

N. Zhang*, D.F. Chao** and W.J. Yang****Ohio Aerospace Institute at NASA Glenn Research Center, Cleveland, OH, **NASA Glenn ResearchCenter, Cleveland, OH, ***ME Department, The University of Michigan, Ann Arbor, MI, USA

Transport phenomena in gas-stirred ladle systems with a slag layer

W.J. Yang*, J.M. Miao*, S. Mochizuki**, and W.M. Yan****Department of Mechanical Engineering, University of Michigan, Ann Arbor, Michigan, U.S.A,**Department of Mechanical Systems Engineering, Tokyo University of Agriculture and Technology,Koganei, Tokyo, Japan, ***Departmennt of Mechanical Engineering, Hua Fan University, Shih-Ting, Taipei,22305, Taiwan, R.O.C.

A novel two-phase flow system for fabrication of a ceramic/polymer composite

C. DryNatural Process Design 1605 Park Haven Drive Champaign, Illinois, USA

Liquid velocity fields in two-phase microchannel convection

E.N. Wang, S. Devasenathipathy, D.W. Fogg, J.M. Koo, J.G. Santiago, K.E. Goodson and T.W. Kenny Mechanical Engineering, Stanford University, USA

Fluorescent imaging of void fraction in two-phase microchannels

D. Fogg, R. Flynn, C. Hidrovo, L. Zhang and K. GoodsonDepartment of Mechanical Engineering, Stanford University, Stanford, USA

Microscale desportion based on membrane separation

J. Siekas, J. Thorud, D.V. Pence and J.A. LiburdyDepartment of Mechanical Engineering, Oregon State University, Corvallis, USA

Investigation of spray formation by ligament controlled atomizers

V. Srinivasan*, A.J. Salazar** and K. Saito***

Variation of the local wall superheat along the circumference of a horizontal tube on pool boiling heattransfer

G. Ribatski*, J.M. Saiz Jabardo**, E. Fockink da Silva** and E. Bugança Stelute***Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign, 1206 W.Green Street, Urbana, USA, **Departamento de Engenharia Mecânica, Escola de Engenharia de São Carlos,Universidade de São Paulo, Av. Trabalhador SãoCarlense, 400, São Carlos, SP, Brazil

Experimental investigation of liquid sheet contraction and departure-site spacing for liquid dropletsand jets falling on in-line bundle of horizontal circular tubes

G. Ribatski and A.M. JacobiDepartment of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign, 1206 W.Green Street, Urbana, USA


Vibration-induced two-phase cooling technologies for high power thermal management

S. Heffington, S. Tillery, M. Smith, and A. GlezerGeorge W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, USA

Separation of particles by chaotic advection

R. Chevray* and A. Omurtag***Department of Mechanical Engineering, Columbia University, New York, USA, **Bloomberg L.P., NewYork, USA

Distribution and properties of liquid drops in viscous liquid-liquid contacting processes

H.T. Kim*, S.M. Son*, C.G. Lee*, Y. Kang* and S.D. Kim***Chungnam National University, Daejeon, Korea, **KAIST, Daejeon, Korea

An experimental investigation of flow boiling in a microchannel

C. Huh and M.H. KimPohang University of Science and Technology, Pohang, Kyoungbuk, Korea

Effect of tube orientation on two-phase flow distribution of R-22 in T-junction

S.J. Tae and K. ChoSungkyunkwan University, Suwon 440-746, Korea

Enhancement of absorption performance due to the film wave formation on the vertical absorber

J. Kim and K. ChoSungkyunkwan University, Suwon 440-746, Korea

Application of electrical resistance imaging to two-phase flows

S. Kim*, K.J. Lee*, Y.J. Ko*, K.Y. Kim*, B.S. Kim*, M.C. Kim*, H.S. Cho** and B.S. Lee****Cheju National University, Cheju, Korea, **Yonsei University, Wonju, Korea, ***Konkuk University,Chungju, Korea

Experimental analysis of the flow through a micro-orifice

J.J. Shin, C.H. Lee, S.G. Kim and S.K. OhDA R&D Center, Samsung Electronics, Suwon, Korea

Effect of guide plate to enhance heat transfer on planar water impinging jet

C.H. Shin, S.H. Yim and H.H. ChoYonsei University, Seoul, Korea

Reactivity and attrition characteristics of oxygen carrier particles for chemical-looping combustion

S.R. Son and S.D. KimKAIST, Daejeon, Korea

A numerical study on the curvature effect on the behaviors of fuel sprays impinging on the concavesurface

G.H. Ko and H.S. RyouChung-Ang University, Seoul, Korea


A study on the two-phase flow in single- and multi-channel

M.Y. Ha*, C.H. Kim**, Y.W. Jung*, G.H. Jeong* and S.G. Heo***Pusan National University, Pusan, Korea, **LG Electronics, Changwon, Gyeongnam, Korea

5x5 bundle CHF measurements at near critical pressure of freon R-134a

S.D. Hong, S. Chun and W.P. BaekKorea Atomic Energy Research Institute, Daejeon, Korea

The effect of operating temperature and working fluid on the heat transport capacity of an inclinedtriangular micro heat pipe

D. Sugumar*, K.K. Tio** and C.K. Eng**National Technical University College of Malaysia, Malacca, Malaysia, **Multimedia University, Malacca,Malaysia

Benchmarking for the interfacial area concentration measurement of five-sensor probe method

D.J. Euh*, B.J. Yun*, W.M. Park*, Y.J. Youn*, C.H. Song* and K.B. Baek***Korea Atomic Energy Research Institute, Daejeon, Korea, **Chungbuk National University, Cheongju,Korea

Measurement of two-phase mass flow rate using average bi-directional flow tube

B.J. Yun, D.J. Euh, K.H. Kang, C.H. Song and W.P. BaekKorea Atomic Energy Research Institute, Daejeon, Korea

Direct vessel vertical injection for advanced emergency core cooling system

S.H. Yoon*, Y.H. Yu** and K.Y. Suh**Seoul National University, Seoul, Korea, **PHILOSOPHIA, Inc., Seoul, Korea

Critical heat flux phenomena in one-dimensional narrow gap

Y.H. Kim*, S.J. Kim*, J.J. Kim*, S.W. Noh*, K.Y. Suh*, J.L. Rempe**, F.B. Cheung*** and S.B.Kim*****Seoul National University, Seoul, Korea, **Idaho National Engineering & Environmental Laboratory, IdahoFalls, USA, ***The Pennsylvania State University, University Park, USA, ****Korea Atomic EnergyResearch Institute, Taejon, Korea

Onset of wetting failure in liquid-liquid systems

D. JacqminNASA Glenn Research Center

Experimental study of flash evaporation on enclosed water pool: influence of characteristic parameters

D. SauryLaboratoire de Mécanique et Energetique, Universite de Valenciennes

Modeling and computation of heat exchanges in the configuration of an impinging jet on a hot plate

N. SeilerIMFT, Allée du Professeur Camille Soula, Toulouse, France


Transient 3D simulations of the gas-solid polydispersed flow in a circulating fluidized bed

O. BatrakIMFT, Allée du Professeur Camille Soula, Toulouse, France

Analysis of condensation flow instabilities in a narrow channel

B. Mederic, M. Miscevic, P. Lavieille, V. Platel Vincent and J.L. JolyLaboratoire d'Energétique, 118, route de Narbonne, Toulouse, France

Influence of liquid content in foam flow on heat transfer intensity

J. Gylys, S. Sinkunas and T. ZdankusDepartment of Thermal and Nuclear Energy, Kaunas University of Technology, Kaunas, Lithuania

Analysis of two-phase flow distribution in Couette-Taylor reactor

E. Dluska, R. Hubacz and S. WronskiFaculty of Chemical and Process Engineering, Warsaw University of Technology, Warszawa, Poland

Break-up of bubbles and droplets in stagnant media

P. Budzynski and M. DziubinskiFaculty of Process and Environmental Engineering, Lódz Technical University, Lódz, Poland

Study of critical heat flux on graphite rod in annular channel

J. Avaliani, M. Chkheidze, G. Goderdzishvili and I. KordzakhiaResearch Institute "OPTICA", 1, Merab Alexidze Str., Tbilisi, Georgia

A simple model for slug flow of gas and non-newtonian liquid mixtures in a vertical pipe

M. Dziubinski and H. FidosFaculty of Process and Environmental Engineering, Lodz Technical University, Lódz, Poland

Approximation to the drag coefficient on a bubble moving through power-law or carreau fluid

M. Dziubinski, M. Orczykowska and P. BudzynskiFaculty of Process and Environmental Engineering, Lodz Technical University, Poland

A 2D ill-posed problem in predicting boiling heat transfer coefficient

T. OrzechowskiKielce University of Technology, Kielce, Poland

Modelling of instability of water and steam water flow in evaporator

K. Wojs and P. SzulcInstitute of Heat Engineering and Fluid Mechanics, Wroclaw University of Technology, Poland

Electrohydrodynamic organisation of condensate drainage for integral-fin tube by means of doubleelectrode

D. Butrymowicz, J. Karwacki and M. TrelaInstitute of Fluid-Flow Machinery, Polish Academy of Sciences, Gen. J. Fiszera 14, Gdañsk, Poland


The structure-phenomenological study of two-phase liquid systems

E. Taran, Y. Pridatczenko and V. GryaznovaKiev National University, Ukraine

Influence of environment parameters on the surface wetting by droplets

Z. Zapalowicz and M. TrelaSzczecin Technical University, Poland

Pressure waves of moderate amplitude in a gas-liquid medium of cluster structure

V.E. Dontsov and V.E. NakoryakovInstitute of Thermophysics SB RAS, Novosibirsk, Russia

Modeling of simultaneous heat and mass transfer for vapor absorption by immobile solution layer

V.E. Nakoryakov and N.I. GrigoryevaInstitute of Thermophysics SB RAS, Novosibirsk, Russia

Boiling heat transfer and upward flow patterns in a bundle of minichannels

V.V. Kuznetsov, A.S. Shamirzaev and I.N. ErshovInstitute of Thermophysics SB RAS, Novosibirsk, Russia

Development of explosive boiling in a flat microheater

V.V. Kuznetsov and E.S. VassermanInstitute of Thermophysics SB RAS, Novosibirsk, Russia

Hydrodynamic structure of two-phase bubbly flow in a horizontal channel

O.N. Kashinsky, A.V. Chinak and E.V. KaipovaInstitute of Thermophysics SB RAS, Novosibirsk, Russia

Evolution of local characteristics of upward slug flow in a vertical pipe

O.N. Kashinsky, V.V. Randin and A.S. KurdumovInstitute of Thermophysics SB RAS, Novosibirsk, Russia

A single bubble impact on the wall in upward laminar bubbly flow

O.N. Kashinsky, L.C. Timkin, R.S. Gorelik and P.D. LobanovInstitute of Thermophysics SB RAS, Novosibirsk, Russia

Heat transfer and crises phenomena in falling liquid nitrogen films at boiling and evaporation

A.N. Pavlenko, A.M. Matsekh and V.V. LelInstitute of Thermophysics SB RAS, Novosibirsk, Russia

Summarizing experimental data on condensation heat transfer of moving vapor inside vertical tubes

I.I. GogoninInstitute of Thermophysics SB RAS, Novosibirsk, Russia


Experimental study of extended DNB at a step-wise heat supply in a pool boiling conditions

V.V. Ovchinnikov*, B.P. Avksentiuk** and V.M. Kravchenko***Institute of Thermophysics SB RAS, Novosibirsk, Russia, **Kiev National Commercial and EconomicUniversity, Ukraine

The study of structure, heat and mass transfer in the gas-droplet near-wall jet in a tube

V.I. Terekhov and M.A. PakhomovInstitute of Thermophysics SB RAS, Novosibirsk, Russia

Fluidization in vortex chambers - Peculiarities of gas dynamics, heat and mass transfer

E.P. Volchkov, N.A. Dvornikov and V.V. LukashevInstitute of Thermophysics SB RAS, Novosibirsk, Russia

Numerical investigation of cellular heterogeneous detonation in aluminum particle gas suspension

T.A. Khmel, A.V. Fedorov and V.M. FominInstitute of Theoretical and Applied Mechanics SB RAS, Novosibirsk, Russia

Collective Bow shock ahead of the transverse system of spheres in a flow behind shock wave

V.M. Boiko, K.V. Klinkov and S.V. PoplavskiInstitute of Theoretical and Applied Mechanics SB RAS, Novosibirsk, Russia

Stability of gas-liquid flow in vertical helical coils

V.Yu. Liapidevskii* and A. Boudlal***Lavrentyev Institute of Hydrodynamics, Novosibirsk, Russia, **Laboratoire de Mecanique de Lille, France

Thin films flow under Marangoni effect

V.V. KuznetsovLavrentyev Institute of Hydrodynamics, Novosibirsk, Russia

Kinetic model for the motion of gas bubbles in a incompressible liquid

V.M. Teshukov and S.L. GavrilyukLavrentyev Institute of Hydrodynamics, Novosibirsk, Russia, Laboratoire de Modelisation en Mecanique etThermodynamique, Marseille, France

Numerical modeling of self-oscillations in a two-layer viscous fluid with bottom mass supply

A.A. OsiptsovLomonosov Moscow State University, Moscow, Russia

Calculation of inclusion concentration in a spherical rotating volume of self-gravitating fluid

A.N. Osiptsov*, A.B. Belonoshko**, R. Ahuja*** and B. Johansson***Lomonosov Moscow State University, Moscow, Russia, **Royal Institute of Technology, Stockholm,Sweden, ***Uppsala University, Sweden

Two-phase heat pipes in heating systems for housings and civil structures

R.M. Bayasan*, A.G. Korotchenko* and G.P. Pustovoit***Inter Heat Pipe Corp., **Lomonosov Moscow State University, Moscow, Russia


Heat transfer regimes at subcooled water swirl flow

A.T. Komov, A.N. Varana, A.V. Dedov and V.V. YagovMoscow Power Engineering Institute, Russia

Alternative energy sources on the basis of controlled cavitations effects

K.M. Dyussenov* and E.D. Sergievsky***Pavlodar State University, Kazakhstan, **Moscow Power Engineering Institute, Russia

Some features of film boiling on a solid hemispherical surface

V.S. Grigoriev*, Yu. P. Ivochkin*, A.P. Kryukov**, Yu.A. Zeigarnik* and V.G. Zhilin**Institute for High Temperatures of Russian Academy of Sciences, **Moscow Power Engineering Institute,Russia

An experimental study of air-solid flow characteristics near blunted body

A.Yu. Varaskin and T.F. IvanovInstitute for High Temperatures of Russian Academy of Sciences, Moscow, Russia

The effect of turbulence on spontaneously condensing wet-steam flow

A.R. Avetissian*, G.A. Philippov* and L.I. Zaichik***Nuclear Power Engineering Reserch & Development Institute, **Institute for High Temperatures of RussianAcademy of Sciences, Russia

Numerical modeling of supersaturated vapor condensation: on the possibility of the experimentaldetermination of the nucleation rate

N.M. Kortsenshteyn and E.V. SamuilovKrzhizhanovsky Power Engineering Institute, Moscow, Russia

Natural and charged clusters in external and integral gas dynamic flows of flying vehicles

A.S. Artyukhin, B.V. Egorov, Yu.E. Makachev, E.A. Pleshakov, I.S. Ufimtsev and A.Yu. KhlopkovMoscow Physical and Engineering Institute, Zhukovsky Central Aerohydrodynamic Institute, Moscow,Russia

Transportation of dust by explosion of circular charge on ground surface

V. Levin* and V. Markov***Institute for Automation and Control Processes, Far Eastern Branch of RAS, Vladivostok, **SteklovMathematical Institute of RAS, Moscow, Russia

Heat transfer at subcooled flow boiling

M.A. Gotovsky, N.D. Agafonova and I.L. ParamonovaPolzunov Institute, St. Petersburg State Politechnical University, St. Petersburg, Russia

Nonlinear oscillations of aerosol in a resonance tube

D.A. Gubaidullin*, R.G. Zaripov*, R.G. Galiullin**, E.R. Galiullina** and L.A. Tkachenko**Institute of Mechanics and Engineering, RAS, **Kazan State University, Kazan, Russia


Modeling evaporation and separation process of complex hydrocarbon liquids using FLUENT 6.1software

A. Soultanov, R. Fahrutdinov and I. DiarovKazan State Technological University, Kazan, Russia

Formations of fractal-like structures during self-similar crystallization with a two-phase zone

D.V. Alexandrov, S.V. Bulitcheva, M.E. Komarovski and I.A. ChirchovUral State University, Ekaterinsburg, Russia

Analyses of effect of noncondensable gases in horizontal steam generator with Relap5/Mod3.2

O.I. Melikhov, V.I. Melikhov, G.V. Bychkova and A.A. BelskyElectrogorsk Research & Engineering Centre of Nuclear Plants Safety, Electrogorsk, Russia

Modeling of two-phase flow phenomena occurred in the horizontal steam generator with STEG code

O.I. Melikhov, V.I. Melikhov and Y.V. ParfenovElectrogorsk Research & Engineering Centre of Nuclear Plants Safety, Electrogorsk, Russia

Dynamics of bubble media under vibration

V.S. Fedotovsky, T.S. Vereshchagina and L.V. TerenikLeipunsky Institute of Physics and Power Engineering, Obninsk, Russia

Dynamic models in heat exchange

V.S. BednarzhevskiiAltai State University, Barnaul, Russia

The structure-phenomenological study of two-phase liquid systems

E.Yu. Taran, Yu.V. Pridatchenko and V.A. GryaznovaKyiv Taras Shevchenko National University, Ukraine

Modeling of two-phase convective-radiative heat exchange in the cooling basin

V. Katinas, P. Vaitiekunas and A. MarkeviciusLithuanian Energy Institute, Kaunas, Lithuania

Study of critical heat flux on graphite rod in annular channel at low velocity of subcooled flow boiling

J. Avaliani, M. Chkheidze, G. Goderdzishvili and I. KordzakhiaResearch Institute "Optica", Tbilisi, Georgia

High heating-rate absorption over surfactants

V.E. Nakoryakov, N.S. Bufetov and R.A. DykhtyarInstitute of Thermophysics SB RAS, Novosibirsk, Russia

Experimental study of dense gas-solid pipe flow: effect of inter-particle collisions

M.V Protasov and A.Yu. VaraksinInstitute for High Temperature of the Russian Academy of Sciences, Moscow


Numerical and analytical analyses of hydraulic and heat transfer characteristics of upward anddownward turbulent two-phase bubble flow

V. Artemyev and Y. KornienkoInstitute for Physics and Power Engineering (IPPE), Obninsk

An application of hele-shaw kind flow in the devices for separation of multiphase mixtures

S.M. DrozdovCentral Aerohydrodynamic Institute (TsAGI), Zhukovsky

Nonstationary effect at complete vapor condensation inside tubes

V.A. Fedorov*, O.O. Milman* and N.A. Pribaturin***"Turbocon", Kaluga, **Institute of Thermophysics SB RAS, Novosibirsk, Russia

Thermohydraulic oscillations and instability in heat abstraction systems with natural circulation oftwo-phase heat transfer agent

V.A. Fedorov and O.O. Milman"Turbocon", Kaluga, Russia

Gas-driven disturbance waves on vertical liquid film

S. Alekseenko, V. Antipin, A. Cherdantsev, S. Kharlamov, D. MarkovichInstitute of Thermophysics SB RAS, Novosibirsk, Russia

Analysis of air bubble probability distribution functions in a large-size dropshaft

C. Gualtieri* and H. Chanson***Hydraulic and Environmental Engineering Department "Girolamo Ippolito", University of Napoli "FedericoII", Napoli, Italy, **Department of Civil Engineering, The University of Quensland, Brisbane QLD 4072,Australia

Modelling of liquid heating under inverted annular film boiling conditions

A.V. PalaginNuclear Safety Institute of Russian Academy of Sciences (IBRAE), B.Tulskaya 52, Moscow, Russia

Analysis and experimental investigation of a bubble pump for absorption refrigeration

A. FrancoDipartimento di Energetica "L. Poggi", Università di Pisa, via Diotisalvi 2, Pisa, Italy

Heat transfer enhancement in refrigerant R141b pool boiling with wire nets structures

A. Franco*, E. Latrofa* and V.V. Yagov***Dipartimento di Energetica "L. Poggi", Università di Pisa, via Diotisalvi 2, Pisa , Italy, **Moscow PowerEngineering Institute (Technical University), Moscow, Russia

Enhanced heat transfer using radial fins

R.N. Krikkis and P. Razelos Institute of Thermal Sciences, 2 Kanigos St., Suite 4-17, Athens, Greece


Analysis of the peach bottom BWR turbine trip pressure wave propagation and its effect on the kineticcore dynamic

A. Bousbia-Salah and F. D'AuriaDipartimento di Ingegneria Meccanica, Nucleare e della Produzione, Università di Pisa, via Diotisalvi, 2,Pisa, Italy

On the possibility of the evaporator drastic reduction in a pulsated two-phase thermosyphon

S. Filippeschi, E. Latrofa and G. SalvadoriDipartimento di Energetica "L. Poggi", Università di Pisa, via Diotisalvi 2, Pisa , Italy

Numerical simulation for micrconvection around brownian motion moving nano-particles

B.X. Wang, H. Li, X.F. Peng and L.X. YangDepartment of Thermal Engineering, Tsinghua University, Beijing, China

Critical heat flux in thin rectangular channels for low flow rate

D.H. Lu, Y.P. Huang, X.S. Bai and Y. LiuThe National Laboratory of Bubble Physics and Natural Circulation Nuclear Power Insitute of China,Chengdu, China

Experimental study on the steam-water separator with corrugated plates

X.M. Wang, S.Y. Huang and J. LiCollege of Power Engineering, HuaZhong University of Science and Technology, Wuhan 430074, China

Effect of electric field on bubbles in two-phase system

W. Dong, R.Y. Li and H.L YuCollege of Power Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China

Application of time-frequency analysis to fluidization regimes recognition in circulating fluidized beds

Y.G. Chen, Z.P. Tian and Z.Q. MiaoSchool of Mechanical and Power Engineering, Shanghai Jiaotong University, No. 800 Dongchuan Road,Shanghai, China

A numerical simulation of liquid-sand separation with downhole hydrocyclone

Z.M. Li, B.F. Li, L.C. Fu and Z.H. ZhangCollege of Petroleum Engineering, University of Petroleum(East China), Dongying 257061, China

Flow regime identification in a two-phase flow using statistical analysis and neural network

Z.H. Jia, G. Niu and J. WangSchool of Mechanical and Power Engineering, Shanghai Jiao Tong University, Shanghai, PO BOX 52,No.1954 Huashan Road, Shanghai, China

Effect analysis of ash on the SO2 formation in coal-fired power plants

J.X. Ren, F.Q. Li, Q.Y. Gu, W.J. Gao and D.S. WeiShanghai University of Electric Power Shanghai 200090, China


Numerical simulation of gas-solid two-phase flow, coal combustion and calcium carbonatedecomposition in pre-calciner

J.D. Lu, L. Huang and S.J. WangState Key Laboratory of Coal Combustion, Huazhong University of Science and Technology, Wuhan 430074,China

Non-Boiling coupled heat transfer of annular two-phase flow of air and water in a small vertical tube

J. Yi and Z.H. LiuSchool of Mechanical and Power Engineering, shanghai Jiaotong University, No.1954 Huashan Road,Shanghai, China

The improvements of evaporation drag model

X.Y. Li, Y.H. Yang and J.J. XuDepartment of Nuclear Science & System Engineering, School of Mechanics and Power, Shanghai JiaotongUniversity, No.1954 Huashan Road, Shanghai, China

Numerical study of turbulent heat transfer in a vertical inclined pipe under supercritical pressure

F. Xu, L.J. Guo and B.F. BaiState Key Laboratory of Multiphase Flow in Power Engineering_Xi'an Jiaotong University_Xi'an, China

Mixed convective flow and heat transfer of water in a vertical helicoidal pipe under supercriticalpressure

F. Xu, L.J. Guo and B.F. BaiState Key Laboratory of Multiphase Flow in Power Engineering_Xi'an Jiaotong University_Xi'an, China

Large eddy simulation of dense gas-particle flow in a riser

P. Xiang and Y.C. GuoDepartment of Engineering Mechanics, Tsinghua University, Beijing, China

Experimental study of a two-phase loop thermosyphon using minichannels

J.L. Xu and H.L. ShiGuangzhou Institute of Energy Conversion, Chinese Academy of Sciences, No.81, Xianlie Zhong Rd.,Guangzhou,China

Prediction of phase distribution in laminar bubbly flow by eulerian/lagrangian method

T. Wen, D. Che and G. XiSchool of Energy Power Engineering, Xi'an Jiaotong University, Xi'an, China

An experimental study on removal of NOx in flue gas at the nonequilibrium plasma

Q. Zhang, S.S. Xu, F. Gu and T. ZhouThermal Power Research Institute, State Power of China, Xi''an, China

Experimental study on sand incipience process in wind-blown-sand flow by PTV

H.Y. Qi and C.F. YouState Key Laboratory of Clean Combustion of Coal, Tsinghua University, Beijing, China


Modeling of bubble flow regime in a closed two-phase thermosyphon

Z.W. Tang, C.F. Ma and Z.Y. JiangCollege of Environmental and Energy Engineering, Beijing University of Technology, Beijing, China

Multi-scale analysis of pressure fluctuation in gas-liquid annular flow

B.F. Bai and L.J. GuoState Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an, China

Turbulent bubbly flow in pipes

A.V. Gorin, A. Vakhguelt and S. Al-ZubaidySchool of Engineering and Science, Curtin University of Technology, Curtin Sarawak, CDT 250, Miri,Sarawak, Malaysia

Laser scattering-transmitting method for in-situ measurement of particle dust concentration in theexhaust dust

S.M. Wang and Y.J. Zhao, Y.Z. Wu and Y. LuThe Key Laboratory of Clean Coal Power Generation and Combustion Technology Ministry of Education,Southeast University, Nanjing 210096, China

Application of ECT on measuring flow regime of circulating suspension bed

C.P. Wang, D.K. Li and Z.A. LuSept. Therm. Eng., Tsinghua University, Beijing, China

Analysis of the behaviour of the simulated moving bed ... · Analysis of the behaviour of the...

Documents

Transcript of Analysis of the behaviour of the simulated moving bed ... · Analysis of the behaviour of the...