20

AMX SERIES

AMX-012

1. 12ch MIC/LINE inputs (P48/A-B, equipped with filter & EQ)2. 6MIX Bus, 2AUX Bus, in addition to Stereo Master3. Stereo Master equipped with limiter (auto release)4. AC and DC battery drive power supply5. Cascade connection possible6. 4W connectable with Intercom System7. OSC (Frequency setting): 1kHz or 400Hz8. External LINE input can be assigned to Stereo Master

RATING

1) Transmission Frequency Range 20~20,000Hz

2) Input Circuits

• INPUT MONO 12circuits 4kΩ(1kHz) Transformerless balanced -60 to +4dBu (w/24dB PAD) • RETURN STEREO 1circuit 10kΩ(1kHz) Transformerless balanced • RETURN TB MONO 1circuit 10kΩ(1kHz) Transformerless balanced

3) Output Circuits

• STEREO +4dBu STEREO 1circuit 600Ω Transformerless balanced • MIX +4dBu MONO 6circuits 600Ω Transformerless balanced • AUX +4dBu MONO 2circuits 600Ω Transformerless balanced • MONITOR +4dBu STEREO 1circuit 600Ω Transformerless balanced • PFL +4dBu MONO 1circuit 600Ω Transformerless balanced • TB +4dBu MONO 1circuit 600Ω Transformerless balanced • PHONES 50mW STEREO 1circuit 35Ω Transformerless unbalanced type

4) Power Supply

• AC 100V~240V 50Hz/60Hz • DC 12.0V~14.8V (Recommended battery: [IDX ENDURA-10 (operating time approx. 100 mins)]

5) Ambient Temperature and Humidity

• Temperature -15˚C~+45˚C(-15˚C~0˚C cold start) • Humidity 20% to 80% (However, no condensation)

6) Dimensions

• Including protruding parts 456(W) × 126(H) × 536(D) mm• Excluding protruding parts 456(W) × 117(H) × 489(D) mm

7) Weight 11.5kg

ANALOG 12CH PORTABLE AUDIO MIXER

21

VU METER PANEL & BACK PANEL

PFL INDICATORDC POWER SW

AC POWER SW

DC RECIVING INDICATORVU METER• MONITOR SELECTION• PFL LEVEL (RIGHT)• BATT CHECK (RIGHT)

BAR GRAPH METER ST&MIX1~6

HP JACK

AUX1/AUX2 OUT

ST RETURN INMIC/LINE IN

MIX1~6 OUT STEREO OUT

MONITOR OUT

PFL OUTCASCADE IN/OUT

TB SEND/RET TERMINAL

METER GAIN SW+4/0

A-B ENABLE SW

DC IN

AC IN

AMX-012

22

AMX SERIES

RATING

1) Transmission Frequency Range 20~20,000Hz

2) Input Circuits

• INPUT MONO 8circuits 4kΩ(1kHz) Transformerless balanced -60 to +4dBu (w/24dB PAD) • RETURN STEREO 1circuit 10kΩ(1kHz) Transformerless balanced • RETURN TB MONO 1circuit 10kΩ(1kHz) Transformerless balanced

3) Output Circuits

• STEREO +4dBu STEREO 1circuit 600Ω Transformerless balanced • MIX +4dBu MONO 6circuits 600Ω Transformerless balanced • AUX +4dBu MONO 2circuits 600Ω Transformerless balanced • MONITOR +4dBu STEREO 1circuit 600Ω Transformerless balanced • PFL +4dBu MONO 1circuit 600Ω Transformerless balanced • TB +4dBu MONO 1circuit 600Ω Transformerless balanced • PHONES 50mW STEREO 1circuit 35Ω Transformerless unbalanced type

4) Power Supply

• AC 100V~240V 50Hz/60Hz • DC 12.0V~14.8V (Recommended battery: [IDX ENDURA-10 (operating time approx. 120 mins)]

5) Ambient Temperature and Humidity

• Temperature -15˚C~+45˚C(-15˚C~0˚C cold start) • Humidity 20% to 80% (However, no condensation)

6) Dimensions

• Including protruding parts 346(W) × 126(H) × 528(D) mm • Excluding protruding parts 346(W) × 117(H) × 489(D) mm

7) Weight 10.0kg

1. 8ch MIC/LINE inputs (P48/A-B, equipped with filter & EQ)2. 6MIX Bus, 2AUX Bus, in addition to Stereo Master3. Stereo Master equipped with limiter (auto release)4. AC and DC battery drive power supply5. Cascade connection possible6. 4W connectable with Intercom System7. OSC (Frequency setting): 1kHz or 400Hz8. External LINE input can be assigned to Stereo Master

ANALOG 8CH PORTABLE AUDIO MIXER

AMX-08

23

VU METER PANEL & BACK PANEL

PFL INDICATOR

DC POWER SW

AC POWER SW

DC RECIVING INDICATORVU METER• MONITOR SELECTION• PFL LEVEL (RIGHT)• BATT CHECK (RIGHT)

BAR GPAPH METER ST&MIX1~6

HP JACK

AUX1/AUX2 OUT

ST RETURN IN

MIC/LINE INMIX1~6 OUT

STEREO OUT

MONITOR OUTPFL OUTCASCADE IN/OUT

TB SEND/RET TERMINAL

METER GAIN SW+4/0

A-B ENABLE SW

DC IN

AC IN

AMX-08

24

INPUT MODULE MASTER MODULE MONITOR MODULE

INPUT LEVEL

HIGH

MID

LOW

3BAND EQ

AUX1/AUX2

PAN

OL/SIG INDICATOR

P48/OFF/A-B

HPF

POLARITY

EQ ON/OFF

MIX1~MIX6

ST BUS ON/OFF

PFL

PRE/POST(MIX 1～6)

INPUT FADER

MIX1~MIX6MASTER LEVEL

MIX1~MIX6OSC/TB SELECTION

AUX1/AUX2MASTER LEVEL

STEREO LIMITER

TB to EXT TB to MIX 1~6

GAIN REDUCTION

STEREO OUTPUT FADER

LEVEL ADJUST(1kHz/400Hz)

BATT CHECK

OSC ON

OSC 1kHz/400Hz

RETURN ST BUS ON/OFF

RETURN INPUT LEVEL

TB SEND LEVEL

TB RETURN LEVEL

PFL OUT LEVEL

TB MIC

RETURN MONITOR SWITCH

MONITOR LEVEL

PHONES LEVEL

MONTOR SELECTION

AMX-08 / AMX-012 INPUT PANEL

25

AMX-08/012 Block Diagram

30

LINEUP

Digital AMX-12D

INPUT

MIC/LINE MONO 8CHLINE MONO/STEREO 4CHSUB IN STEREO 2CHRET IN STEREO 1CHCOMMUNICATION MONO 1CHEXT MONITOR SURROUND(5.1CH) 1CHINSERTION RET MONO 8CH

OUTPUT

MASTER STEREO 1CHGROUP STEREO 2CH

AUXSTEREO 1CHMONO 2CH

MONITOR SURROUND(5.1CH) 1CHFB STEREO 1CHPFL OUT MONO 1CHTB SEND MONO 1CHPHONES STEREO 2CHPHASE STEREO 1CHINSERTION SEND MONO 8CH

Basic Spec.

Power supplyAC 100~240 V 50/60HzDC 12.0~14.8 V

Power consumptionAC 60WDC 12V 5A (Life approx. 90 mins when battery IDX ENDURA-10 used)

Dimensions (W×H×D)

494mm × 197mm × 656mm (Including handle) 494mm × 197mm × 618mm (Not including handle) 434mm × 195mm × 580mm (State with side panel removed.)

Weight 15 kg (Not including cover)

Operating free-air temperature range

-10～+40℃ (however, no condensation)

Feature

• Continues the functions of our analog portable mixer [AMX-12ST].• Switches and Volume have the operability of an analog mixer.• Equipped with slots which allow mounting of up to 2 optional I/O units.• Input has an 8 mono + 4 stereo configuration and even stereo channels are equipped with MIC HA.

• Each input is equipped with a compressor (with link function).• PAN (LCR, F/S, DIV) and monitor function (DOWN MIX) corresponded to 5.1ch surround sound.

• External remote control using GPIO (parallel) and RS-422 (serial) is possible.• External synchronization signal corresponds to word clock and VIDEO(NTSC, PAL).

• Sampling frequency corresponds to 48/96 kHz.• Equipped with 2 units cascade use I/O.• Can be mounted in a 19 inches wide rack.

AMX SERIES

31

LINEUP

Analog AMX-012 AMX-08 AMX-04 AMX-02

INPUT

MIC/LINE MONO 12CH MONO 8CH MONO 4CH MONO 2CH

RET IN STEREO 1CH STEREO 1CH STEREO STEREO

TB RET MONO 1CH MONO 1CH MONO MONO

OUTPUT

ST OUT STEREO 1CH STEREO 1CH STEREO2CH(2CH Settable to monaural direct output.)

STEREO 1CH

MIX OUT MONO 6CH MONO 6CH MONO MONO

AUX1/AUX2 MONO 2CH MONO 2CH MONO MONO

MONITOR STEREO 1CH STEREO 1CH STEREO STEREO

PFL OUT MONO 1CH MONO 1CH MONO MONO

TB SEND MONO 1CH MONO 1CH MONO MONO

PHONES STEREO 1CH STEREO 1CH STEREO 2CH STEREO 1CH

Basic Spec.

Power supplyAC 100~240 V 50/60Hz AC 100~240 V 50/60Hz

DC 12.0~14.8 V DC 12.0~14.8 V DC 9.0V~18.0 V DC 6.0V~16.0 V

Power consumption

AC 50W AC 30W

DC 12V 4A(Life approx. 120 mins when

battery IDX ENDURA-10 used)

DC 12V 3A(Life approx. 150 mins when

battery IDX ENDURA-10 used)0.3A 0.2A

Dimensions

(W×H×D)

456mm × 126mm × 536mm(Including handle)

456mm × 117mm × 489mm(Not including handle)

346mm × 126mm × 536mm(Including handle)

346mm × 117mm × 489mm(Not including handle)

181x60x160mm 104x147x36mm

Weight 12 kg 10 kg 1.9kg 560g

Operating free-air

temperature range-10～+45℃

(however, no condensation)-10～+45℃

(however, no condensation)0℃～40℃

(however, no condensation)0℃～40℃

(however, no condensation)

Feature

• Each channel is equipped with a high-pass filter equalizer.

• All input channels are equipped with MIC HA.

• Two kinds of microphone power supplies (P48 / A-B).

• Stereo output is equipped with a limiter.

• RETURN input which can be sent to the stereo output.

• Equipped with 2 units cascade use I/O.

• Equipped with worldwide AC input and DC (battery) input.

• Corresponds also to A-B12V supply

power in addition to phantom power

supply for microphone (P-48V)

• Equipped with M-S decoder.

Corresponds to M-S system

microphone.

• Each channel is equipped with a

limiter, equalizer, and low-pass filter.

• Master output is equipped with a 3

steps variable type limiter.

• Operated for approximately 10

hours by battery drive, alkali size

AA battery. (When optional size AA

battery case used)

• Wide input range (-70 to +4dBm)

• Limiter realizes natural volume

adjustment by original circuit.

• Wide I/O setting (+4 / -20 / -60dB)

• Equipped with a phantom power

supply for microphone.

• 12V drive

• Output can be switched to 1 input 2

outputs, 2 inputs.

• Equipped with VU/PEAK switching

type meter.

• Equipped with an oscillator (1KHz).