AM magazine 30th issue
-
Upload
additive-manufacturing-technologies-magazine -
Category
Documents
-
view
218 -
download
4
description
Transcript of AM magazine 30th issue
The
AMMagazineThe Magazine for 3D Printing and Additive Manufacturing Technologies
ISSN 0974-7133ISSUE 30 MARCH 2015
The AM Magazine will introduce and update the latest developments in layer manufacturing and Rapid Product Development technologies.The focus of the magzine is to serve the Design and Manufacturing professionals, Research and Development organisations andEducational Institutions who are particularly seeking to adopt layermanufacturing and rapid product development technologies.
Endorsed by
SUBSCRIPTIONSAnnual SubscriptionsRs. 3,000/-The AM Magazine is published bi-monthly by RAPITECH Solutions Inc.* All payments are to be made by DD drawn in favor of “ RAPITECH Solutions Inc.,Bangalore”
Publisher
Chief Editors
RAPITECH Solutions Inc. INDIA
Professor Deon de Beer
Dr. Wan Abdul Rahman
Professor Khalid Abdel Ghany
Vaal University of Technology, South Africa
Standard and Industrial Research Institute of Malaysia (SIRIM), Malaysia
Director of CAD/CAE and Rapid Prototyping and Manufacturing Lab.Central Metallurgical Research and Development Institute (CMRDI), Cairo, Egypt
ADVERTISING/OPERATIONS
Jyothish KumarRAPITECH Solutions [email protected] Mob: +91 9901033712
EDITORIAL ADVISORY BOARD
Professor P.Bartolo
Assitant Professor Bahram Asiabanpour, Ph.D
Professor Alain Bernard
Associate Professor Chua Chee Kai
Dr Gurunathan Saravana Kumar
Professor David W. Rosen
Professor Bopaya Bidanda
Associate Professor Yonghua Chen
Professor Manoj Kumar Tiwari
Professor Grier Lin
Professor David L. Bourall
Dr Allan E. W. Rennie
Associate Professor Salih Akour
Dr Rajesh Ranganathan
Dr Pulak M Pandey
Rob Snoejis,
Department of Mechanial Engineering, School of Technology and ManagementLeira, Portugal
Manufacturing Engineering Ingram School of EngineeringTexas State University- USA
IRCCyN, Ecole Centrale de Nantes, France
Nanyang Technological University, Singapore
Department of Engineering Design, Indian Institute of Technology Madras
Rapid Prototyping and Manufacturing Institute (RPMI)Georgia Institute of Technology, Atlanta USA
University of Pittsburg, USA
The University of Hong Kong, Hong Kong
Indian Institute of Technology, Kharagpur
International Leadership Institute, South Australia
University of Texas at Austin, USA
Lancaster Product Development Unit, Lancaster University
University of Jordan, Amman
Department of Mechanical Engineering, Coimbatore Institute of Technology
Indian Institute of Technology, Delhi
Layerwise, Belgium
Additive Manufacturing Society
of India (AMSI)French Rapid Prototyping Association
Portugese Rapid Prototyping Association
Standard and Industrial Research Institute of Malaysia
The AM Magazine is also endorsed by the following associations and organisations as a leading resource for information on the latestdevelopment of Rapid Product Development Technologies
3D Systems, USAVoxeljet Technology Gmbh, Gmbh
Optomec Inc. USA Nikon Metrology Arcam AB, Sweden
EOS Gmbh, GermanySchultheiss Gmbh, Germany
The AM Magazine
# 42, BSK 3rd Stage, 3rd Block, 3rd Phase, 9th Cross, Banagalore-560085, INDIARAPITECH Solutions Inc.
EDITORIAL
Stratasys Inc, USAFARO, USA
Publisher
RAPITECH Solutions Inc., is a leading edge service provider in Rapid
Prototyping (SLA/ SLS/ FDM /3D Printing), Rapid Tooling (Vaccum
Casting), Rapid Metal Casting and Reverse Engineering.
www.rapitech.co.in
Central Metallurgical Research & Development Institute
ExOne, GmbH
EFESTO LLC, USA
Layerwise, Belgium
RAPITECH Solutions Inc., aims to disseminate the research and development work in the field of Additive Manufacturing Technologies.The Objectives are-
To undertake and support Additive Manufacturing research projects.
To disseminate knowledge on state-of the–art Additive Manufacturing technology through training courses, organising seminars, symposia and workshops.
To network and tie up with best the Additive Manufacturing institutions/Organisations in the world to tap best ideas and transfer best practices from around the world.
Interact and collaborate with international Additive Manufacturing institutions and organisations to pursue research projects.
The AM Magazine AM - 14/15 Vol.05 Issue 30
AM Magazine online www.ammagazine.in
http://issuu.com/rpdmag
3
CONTENTS
4 AMMagazine Nov 2015
5 AMMagazine Nov 2015
6 AMMagazine Nov 2015
7 AMMagazine Nov 2015
AMMagazine Nov 20158
AMMagazine Nov 20159
AMMagazine Nov 201510
AMMagazine Nov 201511
AMMagazine Nov 201512
AMMagazine Nov 201513
AMMagazine Nov 201514
AMMagazine Nov 201515
AMMagazine Nov 201516
AMMagazine Nov 201517
www.amsi.org.in