Alvi automation(gas alarm) product brochure 2016

Solutions for Gas Detection, Instrumentation and Automation

Product BrochureALVI Automation ( )

2016

GasAlarm

ALVI Automation (India) Pvt. Ltd.(GasAlarm Systems)

301, Plot No.-28, Nannu Marg, Devi Nagar

Jaipur (Raj.) – 302019 (India)

Website: www.alviautomation.com, www.ga

ALVI Automation (India) Pvt. Ltd.

Devi Nagar

302019 (India)

.gasalarm.com.au

ALVI Technologies Pty. Ltd.(GasAlarm System

2/79, Station Road, Seven Hills, Sydney

NSW 2147, Australia

Email: [email protected]

Website: www.alvi.co

Tel No.: +61-2 983

ALVI Technologies Pty. Ltd. GasAlarm Systems)


NSW 2147, Australia

[email protected], [email protected]

.com.au, www.gasalarm.com.au

838 7220 / +61-4 1128 7513




, Website: www.alviautomation.com, www.ga


Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513

Email: [email protected], [email protected]@gasalarm.com.au

Tel No.: +91-141-2293-968

Index

• Gas Sensor & Transmitter ………………………………..…..…. Page 3 - 9

MSR Electronic, Germany

• Pressure, Level & Temperature instrumentation…...…..….. Page 11 - 35

Fischer Mess Und Regeltechnik, Germany

• Actuators – rotatory, linear...………..………………..…….….. Page 36 - 40

Joventa, Germany (HVAC, non Ex proof application)

• Portables, transmitter – pH, dis. O2, Redox………..…….….. Page 40 - 42

Greisinger, Germany

• Flow switch, level, spill, leak solutions……….…………….... Page 43 - 47

Jola, Germany

• Differential pressure, pressure switch/transmitter……….... Page 57 - 48

Beck Sensor, Germany

ALVI Automation ( ) Product Brochure 2016 GasAlarm






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

MSR Electronic Product Guide Gas detector, transmitter, analyser – toxic, flammable, oxygen

Carbon Monoxide Sensor Transmitter Also available for Zone 1, Zone 2 hazardous area, SIL2 MSR Electronic, Germany Carbon Monoxide (CO) sensor transmitter includes digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect carbon monoxide concentrations (CO). Comfortable calibration routine with selective access release is integrated in the transmitter. FEATURES

• Measuring range: 0-300 ppm (standard), 0-150 / 0-500 ppm (optional) • Technology: Electro-chemical (Gel type), Diffusion • Output: 4-20mA (standard) analog signal output, 0-10V DC (option),

RS485 (optional) • Accuracy: ± 3 ppm • Life expectancy: 5 years, normal operating environment • Operating temperature: -10° C to 50° C (standard) • Protection housing: IP44, IP65, stainless steel, duct housing • Poison / over flood protection, Reverse polarity protected, overload

and short-circuit proof • Relay output, Integrated buzzer, LCD display, (optional)

APPLICATION For the detection of carbon monoxide (CO) within a wide range of commercial applications such as:

• Underground garages, parking ventilation • Tunnels, coal mines • Engine repair shops, loading bays, engine test benches, • Shelters, go-kart race courses • Industries, gas furnace, gas trains • Kitchen, combustion area, heating area etc.

Carbon Dioxide Sensor Transmitter Also available for Zone 1, Zone 2 hazardous area, SIL2 MSR Electronic, Germany Carbon Dioxide (CO2) sensor transmitter includes digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect carbon dioxide concentrations. Comfortable calibration routine with selective access release is integrated in the transmitter. FEATURES

• Measuring range: 0-2000 ppm / 0-5000 ppm (standard), 0-2%, 0-5%, 0-20% and 0-100% Vol also available

• Technology: NDIR (Gold plated NDIR sensing cell) • Output: 4-20mA (standard) analog signal output, 0-10V DC (optional),

RS485 (optional) • Life expectancy: >15 years, normal operating environment • Operating temperature: -10° C to 50° C (standard) • Protection housing: IP30, IP65, stainless steel, duct housing

With IP65 weather-

proof housing

IP30 enclosure

s improvement programme.s improvement programme.s improvement programme.

s improvement programme.s improvement programme.s improvement programme.






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Poison / over flood protection, Reverse polarity protected, overload and short-circuit proof

• Relay output, Integrated buzzer, LCD display, (optional) APPLICATION

• Building ventilation and air-conditioning • Cold stores, ripening chambers, warehouse • Food processing, beverages • Agriculture, horticulture, incubators • Industrial application, combustion analysis etc

Oxygen Sensor Transmitter Also available for Zone 1, Zone 2 hazardous area, SIL2 MSR Electronic, Germany Oxygen (O2) sensor transmitter includes digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect oxygen concentrations. Comfortable calibration routine with selective access release is integrated in the transmitter. FEATURES

• Measuring range: 0-25% Vol (standard), 0- 30%, 0-100% Vol (optional)

• Technology: Electro-chemical (Gel type), Diffusion • Output: 4-20mA (standard) analog signal output, 0-10V DC (option),

RS485 (optional) • Accuracy: ± 0.01% Vol • Life expectancy: 3 years, normal operating environment • Operating temperature: -10° C to 50° C (standard) • Protection housing: IP44, IP65, stainless steel, duct housing • Poison / over flood protection, Reverse polarity protected, overload


APPLICATION

• Food processing, storage • Cold stores, ripening chambers, CA application, warehouses • Building ventilation, air quality monitoring • Tunnels, coal mines • Industries application, combustion analysis • Pharmaceuticals, clean rooms, medical applications

Ammonia Sensor Transmitter Also available for Zone 1, Zone 2 hazardous area , SIL2

MSR Electronic, Germany ammonia (NH3) sensor transmitter includes digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect ammonia concentrations. Comfortable calibration routine with selective access release is integrated in the transmitter.

FEATURES • Measuring range: 0-300 ppm (standard), 0- 2000 / 0-5000 ppm (optional) • Technology: Electro-chemical / Semi-conductor / Pellistor / NDIR • Output: 4-20mA (standard) analog signal output, 0-10V DC (option), RS485 (optional) • Accuracy: ± 0.1 ppm

s improvement programme.s improvement programme. s improvement programme.






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Life expectancy: 3-5 years, normal operating environment • Operating temperature: -10° C to 50° C (standard) • Protection housing: IP44, IP65, stainless steel, duct housing • Poison / over flood protection, Reverse polarity protected, overload


APPLICATION

• Food processing, storage • Cold stores, ripening chambers, CA application, warehouses • Refrigeration, beverages • Fertilizers, chemicals, • Industries application • Pharmaceuticals, clean rooms, medical applications

LPG Sensor Transmitter Also available for Zone 1, Zone 2 hazardous area, SIL2 MSR Electronic, Germany LPG sensor transmitter includes digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect LPG concentrations. Comfortable calibration routine with selective access release is integrated in the transmitter. FEATURES

• Measuring range: 0-100% LEL • Technology: Pellistor (Catalytic bead) type, Diffusion • Output: 4-20mA (standard) analog signal output, 0-10V DC (option),

RS485 (optional) • Accuracy: ± 0.01% LEL • Life expectancy: 3-5 years, normal operating environment • Operating temperature: -10° C to 50° C (standard) • Protection housing: IP44, IP65, stainless steel, duct housing • Poison / over flood protection, Reverse polarity protected, overload


APPLICATION

• Industries application, combustion analysis • Hotels, hot water systems, • Gas reticulation systems, pipe gas systems • Gas trains – food processing, ceramic processing • Refineries, fertilizers, Pharmaceuticals etc industrial applications

.

Ethylene Sensor Transmitter MSR Electronic, Germany Ethylene (C2H4) sensor transmitter includes digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect ethylene concentrations. Comfortable calibration routine with selective access release is integrated in the transmitter.

FEATURES

• Measuring range: 0-100 ppm, 0-2000 ppm, 0-100% LEL • Technology: Electro-chemical, Semi-conductor, Pellistor

IP65 weather-proof

housing







Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Output: 4-20mA (standard) analog signal output, 0-10V DC (option), RS485 (optional) • Life expectancy: 3-5 years, normal operating environment • Operating temperature: -10° C to 50° C (standard) • Protection housing: IP44, IP65, stainless steel, duct housing • Poison / over flood protection, Reverse polarity protected, overload


APPLICATION • Food processing, storage • Cold stores, ripening chambers, CA application, warehouses • Industries application, combustion analysis • Pharmaceuticals, clean rooms, medical applications

Hydrogen Sensor Transmitter Also available for Zone 1, Zone 2 hazardous area, SIL2 MSR Electronic, Germany Hydrogen (H2) sensor transmitter includes digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect hydrogen concentrations. Comfortable calibration routine with selective access release is integrated in the transmitter. FEATURES

• Measuring range: 0-100% LEL • Technology: Pellistor • Output: 4-20mA (standard) analog signal output, 0-10V DC (option),

RS485 (optional) • Life expectancy: 3 years, normal operating environment • Operating temperature: -10° C to 50° C (standard) • Protection housing: IP44, IP65, stainless steel, duct housing • Poison / over flood protection, Reverse polarity protected, overload


APPLICATION • Battery charging facility • Industries application analysis • Pharmaceuticals, medical applications

Methane (CNG, PNG, LNG) Sensor Transmitter Also available for Zone 1, Zone 2 hazardous area, SIL2 MSR Electronic, Germany methane (CH4) sensor transmitter includes digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect methane concentrations. Comfortable calibration routine with selective access release is integrated in the transmitter. FEATURES

• Measuring range: 0-100% LEL, 0-100% Vol • Technology: Pellistor (catalytic bead) • Output: 4-20mA (standard) analog signal output, 0-10V DC (option), RS485 (optional) • Life expectancy: 3-5 years, normal operating environment • Operating temperature: -10° C to 50° C (standard) • Protection housing: IP44, IP65, stainless steel, duct housing







Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Poison / over flood protection, Reverse polarity protected, overload and short-circuit proof

• Relay output, Integrated buzzer, LCD display, (optional)

APPLICATION • Refineries, oil fields, exploration • Oil & gas pipelines, bullets • Gas trains – food processing, ceramic processing • Combustion, furnace application • Industries application, combustion analysis • Pharmaceuticals, clean rooms, medical applications

Hydrogen Sulphide Sensor Transmitter Also available for Zone 1, Zone 2 hazardous area, SIL2 MSR Electronic, Germany Hydrogen sulphide (H2S) gas sensor transmitter includes digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect H2S gas concentrations. Comfortable calibration routine with selective access release is integrated in the transmitter. FEATURES

• Measuring range: 0-50 / 0-200 ppm • Technology: Electro-chemical • Accuracy: 0.2 ppm • Output: 4-20mA (standard) analog signal output, 0-10V DC (option),

RS485 (optional) • Life expectancy: 2 years, normal operating environment • Operating temperature: -10° C to 50° C (standard) • Protection housing: IP65, stainless steel, duct housing • Poison / over flood protection, Reverse polarity protected, overload


APPLICATION • Refineries, oil fields, exploration • Oil & gas pipelines, bullets • Chemicals, petrochemicals etc • Industries application, combustion analysis

VOC (CO2+VOC) Sensor Transmitter (Air Quality) Also available for Zone 1, Zone 2 hazardous area, SIL2 MSR Electronic, Germany Indoor air quality (CO2+VOC) sensor transmitter includes digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect IAQ gas concentrations. FEATURES

• Measuring range: 0-4000 ppm • Technology: Bio Semiconductor • Output: 4-20mA (standard) analog signal output, 0-10V DC (option), RS485 (optional) • Life expectancy: >5 years, normal operating environment • Operating temperature: -10° C to 50° C (standard) • Protection housing: IP30, IP65, stainless steel, duct housing • Poison / over flood protection, Reverse polarity protected, overload







Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968


APPLICATION

• Building ventilation, air-conditioning • Malls, auditoriums, commercial space, offices • Pharmaceuticals, clean rooms, medical applications • Pollutions monitoring

Freon (Refrigerant) Sensor Transmitter Also available for Zone 1, Zone 2 hazardous area, SIL2 MSR Electronic, Germany Freon (CFC, HCFC) gas sensor transmitter includes digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect Freon gas concentrations. FEATURES

• Measuring range: 0-2000 ppm • Technology: Semiconductor, NDIR • Output: 4-20mA (standard) analog signal output, 0-10V DC (option),

RS485 (optional) • Life expectancy: 5-15 years, normal operating environment • Operating temperature: -10° C to 50° C (standard) • Protection housing: IP44, IP65, stainless steel, duct housing • Poison / over flood protection, Reverse polarity protected, overload


APPLICATION • Refrigerant, air-conditioning • Cooling stations, chiller plants • Power plants, Industries application, • Pharmaceuticals, clean rooms, cold rooms, medical applications

Sulphur Dioxide Sensor Transmitter Also available for Zone 1, Zone 2 hazardous area, SIL2 MSR Electronic, Germany Sulphur Dioxide (SO2) gas sensor transmitter includes digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect SO2 gas concentrations. FEATURES

• Measuring range: 0-20 ppm • Technology: Electro-chemical • Output: 4-20mA (standard) analog signal output, 0-10V DC (option), RS485 (optional) • Life expectancy: 3 years, normal operating environment • Operating temperature: -10° C to 50° C (standard) • Protection housing: IP44, IP65, stainless steel, duct housing • Poison / over flood protection, Reverse polarity protected, overload


APPLICATION • Refineries, oil fields, exploration






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Oil & gas pipelines, bullets • Chemicals, petrochemicals etc • Industries application, combustion analysis • Pharmaceuticals, clean rooms, medical applications

Hydrogen Chloride Sensor Transmitter Also available for Zone 1, Zone 2 hazardous area, SIL2 MSR Electronic, Germany Hydrogen Chloride (HCl) gas sensor transmitter includes digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect HCl gas concentrations. Comfortable calibration routine with selective access release is integrated in the transmitter. FEATURES

• Measuring range: 0-20 / 0-200 ppm • Technology: Electro-chemical • Output: 4-20mA (standard) analog signal output, 0-10V DC (option),



APPLICATION

• Refineries, oil fields, exploration • Oil & gas pipelines, bullets • Chemicals, petrochemicals etc • Industries application • Pharmaceuticals, clean rooms, medical applications

Nitrogen Dioxide Sensor Transmitter Also available for Zone 1, Zone 2 hazardous area, SIL2 MSR Electronic, Germany Nitrogen Dioxide (NO2) gas sensor transmitter includes digital measurement value processing and temperature compensation for the continuous monitoring of the ambient air to detect NO2 gas concentrations. Comfortable calibration routine with selective access release is integrated in the transmitter. FEATURES

• Measuring range: 0-20 / 0-50 ppm • Technology: Electro-chemical • Output: 4-20mA (standard) analog signal output, 0-10V DC (option),



APPLICATION • Industries application






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Pharmaceuticals, clean rooms, medical applications Other toxic and flammable Gas detector / transmitter available are:

Acetic Acid Ethyl Mercaptan JP8 Ozone

Acetone Ethylene Oxide Mercaptans Petrol Vapours

Acetylene Fluorine / F2 Methanol Phosphine

Benzene Formaldehyde / CH2O Methyl Ethyl Ketone

/ MEK / C4H8O Propane

Carbon Dichloride

Oxide / Phosgene Hydrazine / N2H4 n-Butane Propyl Alcohol

Chlorine / Cl2 Hydrogen Cyanide n-Heptane Propylene / Propene

Chlorine Dioxide / ClO2 Hydrogen Fluoride n-Hexane Silane

Cyclopentane Iso Butane Nitrogen Oxide / NO Styrene

Dinitrogen Oxide / N2O Iso Butyl Alcohol Nitrogen Trifluoride Sulfur Hexafluoride / SF6

Ethane / C2H6 Iso Pentane n-Octane Tetrahydrothiophene

Ethyl Acetate Iso Propanol Alcohol Nonane Toluene

Ethyl Alcohol Iso Propyl Alcohol n-Pentane Trimethyl Amine

Trimethyl Benzene Xylene






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

Fischer Products Catalogue Differential pressure, pressure, level, temperature

Differential pressure �� Gauge DA01 : Diaphragm type, high corrosion resistant DA01 is used for indication and switching differential pressure of gaseous and liquid media in chemical, gas plants, onshore and offshore area etc. Features:

• High corrosion-resistance • Robust, good wear resistant movement • Rinse-able pressure chambers, insensitive against dirt • overpressure safe up to 250 bar • Options: dial with liquid filling; adjustable reference pointer. • Measuring range: 0...60 mbar to 0...1600 kPa • Max. Pressure: 250 bar ( 400 bar > 0.6 bar) • Operating temperature: Medium: -20°C to +80°C • Indicator: 100 mm / 160 mm • Protection class: IP54 per DIN EN 60529, IP65 for filled models

Applications:

• Chemicals and gas plants • On and offshore area

DA03: Diaphragm type, high corrosion resistance. Also available Ex version ATEX certified DA03 is a versatile differential pressure gauge which can be configured with various optional features, such as:

• Adjustable limit contacts: delayed action or magnet actuated type • Proximity type (NAMUR) non-contact limit detector • Pointer position transducer, with electrical signal output

Features: • Corrosion resistant • Rugged, wear resistant mechanism • Unaffected by fouling • Easily cleaned pressure chamber • Options: liquid filling, reference pointer, peak registering pointer • Measuring range: 0-40 mbar to 0-25 bar (other ranges on request) • Overpressure: 40 bar or 100 bar • Media temperature: -20 to +80 Cel • Dial size: 100 mm, 160 mm • Protection class: IP54 per DIN EN 60529 • Connect material: SS 1.4571, Hastelloy C276






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

Applications:

• Chemical, pharmaceutical industries • Process industries • Marine and off-shore, shipping, water treatment, automobile

DA08: Capsule element, Diff. pressure Gauge These instruments are mainly used in industrial and climatic engineering to measure low and lowest differential pressures. They are suitable for measuring non-aggressive and clean gaseous media. Features

• For small ranges (4 mbar and higher) • Maintenance-free • Measuring range: 0-4 mbar to 0-160 mbar • Overpressure: 200 mbar • Operating temperature: Ambient: -20°C to +70°C, me dia: +50°C • Dial size: 100 mm, 160 mm

Applications • Moving tap filters • Ventilators • Veturitubes

DA09 - Differential pressure gauge DA09 is designed for measurement of differential pressures of liquids and gases. It can be fitted with a choice optional accessory, including:

• Limit detector contacts: delayed-action or magnet actuated switch type • Non-contact proximity type limit detector (NAMUR) • Liquid filling for protection

Features

• Corrosion resistant • Choice of pressure connection types • Compatible with aggressive media • Measuring range: 0...25 mbar to 0...250 mbar / 10 bar • Max. Pressure: 400 mbar to 25 bar • Operating temperature: Ambient: -20°C to +80°C, Me dium: +100°C, maximum • Indicator: 100 mm / 160 mm • Protection class: IP54 per DIN EN 60529

Applications

• Chemical, pharmaceutical industries • Process industries • Marine and off-shore

DA12 - Diaphragm type Differential pressure gauge DA12 series is suitable for measurement of pressure, differential pressure and partial vacuum in field of industrial and sanitary techniques. Typical applications are measurements of differential pressure between orward- and return flow in

heating systems and monitoring of filters, compressors and blowers.






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

Measuring system and pressure chamber are available in different materials to meet various requirements. Features:

• Long service life • Multiple applications • High overpressure protection • Measuring range: 0 - 400 mbar to 0 - 25 bar • Nominal pressure: 25 bar • Operating temperature: ambient: -10°c to +70°c, me dium: +70°c, maximum • Protection class: IP54 per din en 60529

DA30 – Diff. pressure gauge, rugged diaphragm type DA30 measures and indicates pressure and differential pressure. It is suitable to work with gaseous and liquid media not affecting the materials used. Electrical and electronic accessory components (KE...) enable limiting of signal and transmitting of measurement. Features

• Measuring system in rugged design • Overpressure proof up to nominal pressure • Slow-action and magnetic snap-action contacts • Inductive contacts (NAMUR) • Azimuth transmitter • Options: limit signaling contacts, pointer rotation transducer, liquid filling • Measuring range: 0...160 mbar to 0...1.6 bar • Nominal Pressure: 40 bar • Operating temperature: Ambient: -20°C to +80°C, Me dium: +80°C, maximum • Protection class: IP65 per DIN EN 60529

Application: • Water treatment • Level measurement • Filter techniques • Flow measurement

Differential Pressure �� Transmitter DE03 – Diff. Pressure Transmitter, with LVDT sensor DE 03 Electronic Differential Pressure Transmitter combines electronic measurement with a rugged sensor design, resulting in high accuracy, high differential and static rating, and ability to handle difficult media. It is available with local digital readout and electronic limit detection relays, with measuring range of 0 – 40 mbar to 0 – 25 bar.

Features:

• Highly corrosion resistant • Rugged, wear resistant sensor design • Low hysteresis • Easily cleaned pressure chamber • Unaffected by fouling • Measuring range: 0-40 mbar to 0-25 bar • Nominal pressure rating: 100 bar






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Operating temperature: Ambient: -10°C to +70°C, Me dium: -15°C to +80°C • Protection class: IP54 per DIN 40050 • Output: 0/4-20mA, 0-10VDC • Display: 3 ½ digit LCD • Options: limit relays, diaphragm pressure seal

Application:

• Water and effluent treatment plants, and other filtration applications: for monitoring condition of filters

• Flow monitoring in sprinkler systems • Flow measurement of steam and hot water, using differential pressure flow sensors, in remote

heating systems • Monitoring pressure drop across valves • Pump control dependent on differential pressure in block unit heating power stations

DE 13 – Diff. pressure transmitter, with inductive displacement transducer DE13 for differential, negative and positive pressure measurement using a diaphragm system with liquid filling. The instrument transmits a standard electrical signal. Features

• Highly corrosion resistant • Rugged, wear resistant sensor design • Low hysteresis • Easy to rinse pressure chambers • Unaffected by fouling • Measuring range: 0-40 mbar to 0-25 bar • Nominal pressure rating: 100 bar • Operating temperature: Ambient: -10°C to +60°C, Me dium: +70°C • Protection class: IP65 per DIN EN 60529 • Output: 0/4-20ma, 0-10VDC • Display: 3 ½ digit LCD (optional)

Applications

• Monitoring filter condition • Flow control • Monitoring ∆ p at valves • Pump control

DE16 – Diaphragm type, diff. pressure transmitter DE16 are used for measuring overpressure, partial vacuum and differential pressure. This series is suitable for various measuring applications in the field of industrial and sanitary techniques. Features

• Overpressure protection • Rugged design • Maintenance and wear free inductive pick-up • Multiple applications






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Measuring range: 0-60 mbar to 0-25 bar • Nominal pressure rating: 25 bar • Operating temperature: Ambient: -10°C to +70°C, Me dium: +70°C • Protection class: IP54 per DIN EN 60529 • Output: 0/4-20mA, 0-10VDC • Display: 3 ½ digit LCD (optional)

Applications:

• Measurement of differential pressure between forward- and return flow in heating systems. • Monitoring of filters, blowers and compressors.

DE23 – Diff. pressure transmitter, for air, gas Features:

• Low pressures measurable without long-term drift • Robust design; over pressure protected; maintenance free • Measuring range: 0-25 Pa to 0-1000 Pa • Nominal pressure rating: 1 bar • Operating temperature: Ambient: -10°C to +70°C, Me dium: +70°C • Protection class: IP65 per DIN EN 60529 • Output: 4-20mA, 2 wire

Application:

• Air conditioning and ventilation, condition monitoring of filters • Environment monitoring • Clean room, medical, labs, pharmaceuticals

DE 25 – Digital diff. Pressure transmitter DE25 is a differential pressure transmitter with a 3-wire electrical interface. It is suitable for accurate measurement of positive / negative gauge pressure or differential pressure of air and gases Features:

• Piezo-resistive sensor element • short circuit, overvoltage and reverse battery protected • Measuring range: 0-2.5 mbar to 0-100 mbar • Operating temperature: Ambient: -10°C to +50°C, Me dium: -10°C to +50°C • Protection class: IP65 per DIN EN 60529 • Output: 0/4-20mA, 0-5/10 VDC

Application: • Air conditioning plant and systems, Filter systems • Ventilation systems • Environmental monitoring • Plant and mechanical engineering

DE27 – Digital Diff. pressure transmitter DE27 is a multi-function differential pressure transmitter with a 2-wire or 3-wire electrical interface. It is suitable for accurate measurement of positive / negative gauge pressure or differential pressure of air and gases. Features

• Piezo-resistive sensor






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Robust design; over-pressure protected; maintenance-free • Output signal can be accurately scaled, adjusted for zero offset anywhere in the specified

pressure range, and inverted if needed • All settings/adjustments can be done from a PC using the optional EU03 PC Adaptor • Measuring range: 0-4.0 mbar to 0-100 mbar, +-60.0 mbar • Operating temperature: Ambient: -10°C to +70°C, Me dium: -10°C to +70°C • Protection class: IP65 per DIN EN 60529 • Output: 4-20mA, 0-10 VDC • Display: without, with 3 ½ or 4 Digit LCD

Applications:

• Air conditioning plant and systems, Air flow and actuator air pressure monitoring • Ventilation systems • Environmental monitoring • Condition monitoring of roll-band filters • Flue draft measurement

DE28 – Diff. pressure transmitter Measuring Transmitter for overpressure, partial vacuum and differential pressure of liquid and aerial media. Ranges: 0-0.4 up to 0-6 bar. This series of transmitter is suitable for various measuring applications in the field of industrial and sanitary techniques Features

• Overpressure protection • Maintenance-free due to inductive movement • Rugged design • Measuring range: 0-0.4 bar to 0-6 bar • Operating temperature: Ambient: 0°C to +70°C • Protection class: IP54 per DIN EN 60529 • Output: 0/4-20mA, 0-10 VDC

Applications: • Measurement of differential pressure between forward and return flow in heating systems • Monitoring of filters, blowers and compressors

DE38 - Digital Differential Pressure Transmitter Available in Ex-version for Hazardous zone 2, zone 22, ATEX certified DE 38 is a multi-function field mounted pressure instrument that combines a digital readout, transmitter and dual limit detection relays. It can be used for measurement and control of positive or negative gauge pressure, differential pressure, flow and level. It is compatible for use with relatively clean and non-corrosive gases or liquids. Features

• Robust design; over-pressure protected • Wear-free non-contact LVDT sensing element needs no maintenance • Selectable pressure units • Signal output with possibility of spreading and inverting characteristic curve with any offset

(optional) • Characteristic conversion of output via 3...30 entries table • Complete set-up of all parameters and print out by using optional PC-programming interface

EU03






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Measuring range: 0-400 mbar to 0-1600 bar • Operating temperature: Ambient: -10°C to +70°C; Me dia: -10°C to +70°C • Protection class: IP65 per DIN EN 60529 • Output: 0/4-20ma, 0-10 VDC • Display: 3 ½ digit LCD

Applications • Monitoring of compressors, filters and vacuum systems • Measurement of differential pressure between supply and return fuel lines in heating systems • Flow, control-pressure and level measurement

DE39 – Digital Diff. pressure transmitter – GL Structural tested with pressure sensors Suitable for liquid and gaseous media. Features:

• Large bright LED display • Selectable pressure units • 2 independent limits with a choice of logic modes • With microprocessor for most accurate pressure reading • Digitally programmable zero adjustment and filtering • Optional analog signal output with user-programmable scaling, linearization, inversion and

offset adjustment. • User defined signal conversion look up table (up to 30 points) • Fully programmable from a PC, using the optional model EU03 PC Adaptor • Separate display of each pressure possible • Measuring range: 0-6 bar to 0-40 bar • Nominal pressure: 40 bar • Operating temperature: Ambient: -10°C to +70°C; Me dia: -10°C to +80°C • Protection class: IP65 per DIN EN 60529 • Output: 0/4-20ma, 0-10 VDC

Application: • Differential pressure measurement of highly contaminated media • Filter condition monitoring • Hydrostatic level monitoring • Monitoring of pumps and compressors

DE 44 - Digital 2-Channel Differential Pressure Transmitter, with switch Available in Ex-version for Hazardous zone 2, zone 22, ATEX certified DE44 is a dual-sensor multifunction pressure instrument that combines a digital readout, dual limit detection relays and optional transmitter output. It can measure positive gauge, negative gauge or differential pressure of two independent gas / air pressure sources. Features

• Robust design; over-pressure safe • Two independent differential pressure sensors • Signal output with possibility of spreading and inverting characteristic curve with any offset







Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

EU03 • Measuring range: two independent diff. pressure sensor, 0-4 mbar to 0-100 mbar, +-60mbar • Operating temperature: Ambient: -10°C to +70°C; Me dia: -10°C to +70°C • Protection class: IP65 per DIN EN 60529 • Output: 0/4-20mA, 0-10 VDC • Display: 3 ½ digit LED

Applications • Monitoring of roll-band filters, vacuum systems, etc. • Chimney draught measurement • Flow and control-pressure measurement • Surface coating systems • Ventilation and air handling systems • Climate control systems • Environmental systems

DE45 - Digital Differential Pressure Switch / Transmitter Available in Ex-version for Hazardous zone 2, zone 22, ATEX certified DE45 is a multi-function pressure instrument that combines a digital readout, dual limit detection relays, and optional transmitter output. It can measure positive gauge, negative gauge, or differential pressure. Features

• Robust design, over-pressure safe • Signal output with possibility of spreading and inverting characteristic curve with any offset


EU03 • Measuring range: two independent diff. pressure sensor, 0-4 mbar to 0-250 mbar, +-60 mbar • Operating temperature: Ambient: -10°C to +70°C; Me dia: -10°C to +70°C • Protection class: IP65 per DIN EN 60529 • Output: 0/4-20mA, 0-10 VDC • Display: 3 ½ digit LED • Switching contacts: 2 sets of programmable voltage free relay contacts, NO or NC (optional)

Applications

• Monitoring of roll-band filters, vacuum systems, etc. • Chimney draught measurement • Flow and control-pressure measurement • Surface coating systems

DE46 - Digital Differential Pressure Switch / Transmitter Available in Ex-version for Hazardous zone 2, zone 22, ATEX certified DE46 is a multi-function diff. pressure switch with an optional transmitter signal output. It is suitable for accurate measurement of low pressure/ negative gauge pressure or differential pressure of air and gases.

Features: • Low pressure measurable without long-term drift • Robust design, over-pressure safe, Maintenance-free • Optional transmitter signal output that can be accurately scaled, adjusted for zero offset






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

anywhere in the specified pressure range and inverted if needed • Non-linear measurements can be linearised using a user-programmable look-up table of up

to 30 points • All settings / adjustments can be done from a PC using optional EU03 PC adaptor • Measuring range: 0-25 Pa to 0-1000 Pa, -100 to +100 Pa • Operating temperature: Ambient: -10°C to +70°C; Me dia: -10°C to +70°C • Protection class: IP65 per DIN EN 60529 • Output: 0/4-20mA, 0-10 VDC • Display: 3 ½ digit LED • Limit relay contact: 2 relays, potential free contacts,

Application:

• Condition monitoring of filters, precision air duct measurement • Clean room pressure balance monitoring • Burner air feed low pressure detection • Oven air feed control

DE50 - Differential Pressure Transmitter Measuring transmitter with limit switching function for overpressure, vacuum and differential pressure especially for gaseous media Features

• High overpressure safety • Maintenance-free due to wear resistant inductive measuring cell • Rugged design • Based on a capsule element measuring system • Measuring range: 0-4 mbar to 0- 600 mbar • Nominal pressure: 3 bar • Operating temperature: ambient: -10°C to +60°C; me dia: -20°C to +70°C • Protection class: IP54 per DIN EN 60529 • Output: 0/4-20mA, 0-10 VDC • Display: 3 ½ digit led (optional) • Limit relay contact: 2 relays, potential free contacts (optional)

Applications:

• Air conditioning technology • Ventilation technology • Environmental engineering • Continuous ventilating control • Monitoring of exhausters, tapeline filters etc. • Chimney draft measurement • Flow and control pressure measurement • Surface technology

DE61 - Differential Pressure Transmitter Measuring transmitter with limit switching functions for acquisition and transmission of lowest pressure and differential pressure. Main Features

• Based on Capacitive sensor • Highly pressure sensitive, long-time stability • Resistant to shocks and vibration, high overpressure safety • Measuring range: 0-0.25 mbar to 0- 4.0 mbar






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Nominal pressure: 0.6 bar • Operating temperature: Ambient: -10°C to +60°C; Me dia: -20°C to +70°C • Protection class: IP54 per DIN EN 60529 • Output: 0/4-20ma, 0-10 VDC • Display: 3 ½ digit LED (optional) • Limit relay contact: 2 relays, potential free contacts (optional)

Typical Applications

• Filter techniques • Precision measurements in air conditioning conduits • Clean-room pressure compensation • Burner vacuum measurements • Circulating air controlling in furnaces

DE70 – Differential pressure transmitter, with microprocessor Available in Ex-version for Hazardous zone 2, zone 22, ATEX certified DE 70 differential pressure transmitter uses a capacitance type sensor and modern microprocessor technology. It is ideally suited for differential pressure applications such as measurement of

• Positive pressure, • Differential pressure, • Liquid level

Where a high degree of accuracy is required. Features

• Capacitance type silicon sensor • Robust, wear resistant sensor • High resistance to corrosion • Low hysteresis • Not affected by fouling of pressure chambers • Microprocessor technology • Measuring range: 0-6 to 0-5000 mbar, 0-2 to 0-20bar • Operating temperature: ambient: -10°C to +70°C; me dia: 0°C to +80°C • Protection class: IP67 • Output: 4-20mA • Display (optional)

Differential pressure �� Switch DS11 - Differential Pressure Switch, Diaphragm based A combination of indicating and switching instrument for pressure, differential pressure and partial vacuum. Pressure chamber and measuring diaphragm are available in different materials to meet various requirements. Features

• High repeatability of switching points • Long service life • Multiple applications • High overpressure protection • Measuring range: 0-400 mbar to 0-25 bar • Operating temperature: Ambient: -10°C to +70°C; Me dia: +70°C • Protection class: IP54 per DIN EN 60529






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Contact outputs: 1 or 2 micro switches, adjustable • GL type approved, Acc. To SEV guidelines


• Measurement of differential pressure between forward and return flow in heating systems • Observation of filters and pumps

DS13 – Differential Pressure Switch, gauge DS13 is used for monitoring of pressure, differential pressure and partial vacuum in tanks, hydraulic and fluid technology systems, filters and blowers. This instrument offers high repeatability of switching points in rugged design during long service life. Pressure chamber and measuring diaphragm are available in several materials to enable adapting the instrument to various applications. Features

• High repeatability of switching points • Long service life • High overpressure safety • Multiple applications • Measuring range: 0-400 mbar to 0-25 bar • Operating temperature: ambient: -10°C to +70°C; me dia: +70°C • Protection class: IP54 per DIN EN 60529 • Contact outputs: 1 or 2 micro switches, adjustable

DS21 - Differential Pressure Switch, Gauge Available in Ex-version for Hazardous zone 1, zone 2, ATEX certified DS21 series is used as flow-operation safety device in heat carrier oil plants acc. to DIN 32 727 and hot water plants acc. to VdTÜV data sheet flow 100. The flow-operation safety devices consist of a differential pressure device, e.g. an orifice plate, differential pressure switch and adequate shut-off valves. Follow mounting instructions in accordance to application. All instruments of this type series meet these demands. Successful structural testing of type series DS21 is confirmed by the following marks of conformity:

• for flow-operated safety devices DIN 32 727 DIN record No. 1B012/07 • Acc. to VdTÜV data sheet flow 100 TÜV SW/SB . 07 – 020

Features:

• High repeatability of switching points • Long service life • High overpressure protection • Structural testing • Measuring range: 0-250 mbar to 0-6 bar • Operating temperature: Ambient: -10°C to +70°C; Me dia: +70°C • Protection class: IP54 per DIN EN 60529 • Contact outputs: 1 or 2 micro switches, adjustable






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

DS27 - Digital Differential Pressure Switch DS27 is a multi-function differential pressure switch with 2 independent switch outputs. It is suitable for accurate monitoring of positive / negative gauge pressure or differential pressure of neutral, dry air and gases. Features

• Piezo-resistive sensor element • Robust design; over-pressure protected; maintenance-free • Switch activation / deactivation points independently adjustable: hysteresis or limit-window

can have any value • User programmable zero offset, damping, switching delay and switching logic • All settings/adjustments can be done from a PC using the optional EU03 PC Adaptor • Measuring range: 0-4.0 mbar to 0-100 mbar, +- 60 mbar • Operating temperature: Ambient: -10°C to +70°C; Me dia: -10°C to +70°C • Protection class: IP65 per DIN EN 60529 • Contact outputs: 2 X solid state, • Display: 2x LED (standard), 3 ½ digit LCD (optional)

Applications

• Condition monitoring of roll-band filters • Combustion feed air pressure and flow measurement • Air flow and actuator air pressure monitoring

DS31 – Differential pressure switch, adjustable limit Differential pressure switch for positive / negative gauge pressure or differential pressure of neutral media such as industrial water, water for heating systems, neutral gases and oils. It is suitable for on/off control due to the continuously adjustable switching point between 10% and 100% of the measuring range. Features:

• High repeatability of switching points • Long service life • High overpressure protection • Measuring range: 0-0.6 bar to 0-6 bar • Operating temperature: Ambient: +80°C; Media: +80° C • Contact type: micro switch

DS34 – Differential pressure switch Differential pressure switch type DS34 is suitable for all non aggressive gases and fluids, as they are: service water, heating water, neutral gas, oil, oily water. It is suitable to detect vacuum, over pressure and differential pressure. Features:

• High repeatability, long shelf life • Measuring range: 0-0.6 bar to 0-6 bar • Operating temperature: Ambient: -10°C to +80°C; Me dia: +80°C • Contact type: micro switch • Protection class: IP65






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

Pressure �� Gauge MA11 – Standard Bourdon tube manometer / pressure gauge Features:

• Robust mechanical construction • Can be equipment with limit signal transmitters or angular position

measuring transducers • Fulfilled safety standards • Measuring range: 0-0.6 bar to 0-600 bar acc. to DIN EN 837-1 • Nominal pressure: 25 bar • Operating temperature: Ambient: -25°C to +60°C; Me dia: +100°C • Protection class: IP54 per DIN EN 60529

Applications:

• Mechanical and plant engineering • Hydraulics • Pneumatics • Heating and air conditioning technology • Environmental technology

MA12 – Pressure gauge Pressure gauge, especially suited for heavy measuring conditions, e.g. in case of pressure shocks, vibrations or high demands on breaking capacity. The overpressure safe measuring system guarantees high operation safety. The pressure chamber and the measuring diaphragm are available in different materials to meet various requirements. Features:

• Vibration resistant • Long service life, rugged measuring system • Measuring range: 0-400 mbar to 0-25 bar • Nominal pressure: 25 bar • Operating temperature: ambient: -10°c to +70°c; me dia: +70°c • Protection class: ip54 per din en 60529

Applications • Process engineering • Plant engineering • Water economy • Pneumatic conveying systems

MA13 - Bourdon Tube Pressure Gauge (for chemical use) MA13 for overpressure and vacuum meets the high technical requirements of corrosion-resistance and interference immunity. It is used for liquid and gaseous media, except those having a high viscosity or is liable to crystalize. Features:

• Rugged, chemical/ corrosive resistant • Measuring range: 0-0.6 bar to 0-600 bar acc. to DIN 16064 • Operating temperature: Ambient: -25°C to +60°C; Me dia: +100°C • Protection class: IP54 per DIN EN 60529 • Options: contact modules, transducers, liquid filing, marking pointer, drag pointer






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

Application Fields • Chemical industries, process • Materials processing • Pneumatic systems • Machinery and terotechnology • Environmental technology

MA15 – Diaphragm type pressure gauge MA15 series pressure gauges are used for measuring pressure in difficult conditions. They are used to measure pressure whilst being unaffected by the media. All parts of the instrument are made of special materials to handle corrosive process fluids and to withstand aggressive ambient and permanent weathering. Features:

• High corrosion resistance • Manufactured acc. to DIN • High overpressure safe • Suitable for open air installation • Measuring range: 0-25 mbar to 0-400 mbar (flange size: 160 mm)

0-6 bar to 0-25 bar (flange size: 100 mm) • Operating temperature: Ambient: -20°C to +60°C; Me dia: +100°C • Protection class: IP54 per DIN EN 60529 • Options: liquid filling, contact modules, transmitter output

MA32 – Pressure gauge with transmitter Features:

• Casing and measuring system of stainless steel • Safety casing acc. to DIN EN 837-1 • Direct local pressure display • Tele-transmission of measured values • Measuring range: 0-0.6 bar to 0-400 bar • Operating temperature: Ambient: 0°C to +60°C; Medi a: 0°C +85°C • Measuring system transmitter: ceramic measuring cell, 0/4-20mA, 0-10 VDC • Protection class: IP54 acc. to DIN 40050 • Options: liquid filling

Pressure �� Transmitter

ME01 – Digital pressure Gauge with transmitter ME01 is an electronic manometer with on-site display and signal transmitter for positive and negative pressure measurement of liquid and gaseous media. This type series’ manometers are suitable for






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

various measuring tasks; they apply to measuring ranges of 0 - 1.6 bar up to 0 - 60 bar. Features

• Directly measuring sensor without transfer fluid • High vibration-resistance • High accuracy • High overpressure safety • Minimum hysteresis • Measuring range: 0-0.16 bar to 0-60 bar (negative pressure also) • Operating temperature: Ambient: 0°C to +60°C; Medi a: 0°C +85°C • Transmitter: 0/4-20mA, 0-10 VDC output • Protection class: IP65 acc. to DIN 60529


• Process engineering • Process technology • Environmental engineering • Machine and plant construction

ME11 – Pressure transmitter Pressure transmitter for pressure and partial vacuum, with directly measuring ceramic diaphragm. This series is suitable for multiple application in:

• Process engineering and technology • Chemical process, steel, marine, shipping • Environmental technology

Features:

• Robust design, high accuracy • High overload protection, vibration resistance • Minimum hysteresis • Measuring range: 0-1.6 bar to 0-60 bar (negative pressure also) • Measuring element: Ceramic diaphragm • Operating temperature: Ambient: 0°C to +60°C; Medi a: 0°C +85°C • Transmitter: 4-20mA, 0-10 VDC output • Protection class: IP65 acc. to DIN 60529

ME12 – Digital pressure transmitter with remote configuration function Pressure transmitter with ceramic measuring cell for measuring positive and negative pressure.

• Gauge pressure range from -1 – 0 bar to 0 -60 bar • Absolute pressure gauge from 0 – 1 bar to 0-16 bar

ME12 series is suitable for a wide variety of measuring tasks in the fields of:

• Process engineering and technology • Chemical process, steel, marine, shipping • Environmental technology






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

Features: • Configurable, robust housing design • High accuracy, low hysteresis • Measuring range: 0-0.6 bar to 0-60 bar (negative pressure also) • Measuring element: Ceramic diaphragm • Operating temperature: Ambient: -10°C to +60°C; Me dia: -10°C +85°C • Transmitter: 0/4-20mA, 0-10 VDC output • Protection class: IP65 acc. to DIN 60529

ME49 - Pressure Transmitter for Hazardous Areas Available in Ex-version for Hazardous zone 1, zone 2, ATEX certified ME49 pressure transmitter with ceramic gauge head is suitable for accurate measurement of positive / negative gauge pressure in hazardous areas. The units meet demands for type of protection ’’EEx ib IIC T6“. They are approved for usage in zone 1 and 2 hazardous areas given they are connected to intrinsically safe circuits. Features

• High precision of measurements • Direct measuring sensor without transfer fluid • Good long-time stability • Measuring element: Ceramic diaphragm • Measuring range: 0-40 mbar to 0-40 bar • Operating temperature: Ambient: -20°C to +60°C; Me dia: -20°C +85°C • Transmitter: 4-20mA, 2 wire • Protection class: IP65 acc. to DIN 60529

Applications

• Gas supply • Materials processing • Environmental technology • Process engineering

ME50 – Programmable pressure transmitter ME50 is equipped with either a ceramic measuring cell (for range upto 400 mbar) or front-flush piezo-resistive measuring cell (above 400 mbar). This series is suitable for wide variety of measuring tasks in the field of:

• Process engineering and technology • Environmental engineering • Regenerative energy (biogas etc)

Features: • On-site digital display of measured values • Rotatable housing • Free choice of process measurement direction (axial or radial) • Configurable on-site via 3 button menu (off-set, range, damping, display indication)






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Robust housing, high accuracy, high vibration resistance • Low hysteresis • Measuring range: -25 – 25 mbar to 0-40 bar • Operating temperature: Ambient: -20°C to +80°C; Me dia: -10°C +85°C • Transmitter: 4-20mA, 2 wire • Protection class: IP65 acc. to DIN 60529

ME67 – Pressure transmitter for waste water / process measuring Application: Pressure transmitter with ceramic measuring cell ME67 series is suitable for diverse measuring tasks in the following areas:

• Process engineering and technology • Environmental engineering • Regenerative energy (biogas etc) • Waste water engineering

Features: • Suitable for aggressive media • Robust design, high accuracy, high vibration resistance • Low hysteresis, parameterisable • Measuring range: -25…25 mbar to 0-1000 mbar • Operating temperature: Ambient: 0°C to +60°C; Medi a: 0°C +60°C • Transmitter: 4-20mA, 2 wire • Protection class: IP65 acc. to DIN 60529

ME69 – Pressure transmitter for water, electroplating plants ME69 type pressure transmitter is designed to detect process pressure in water treatment and electroplating plants. Because of its all plastics design and its corrosion free characteristic feature derived therefore, the ME69 is best suitable in electroplating systems and plants for treatment of potable, service, process or waste water. Features

• Rugged design • High accuracy • Resistant against aggressive media • Measuring range: 0-1.6 bar to 0-10 bar • Operating temperature: ambient: 0°c to +60°c; medi a: 0°c +60°c • Transmitter: 4-20ma, 2 wire / 0- 10 vdc 3 wire • Protection class: ip65 acc. To din 60529

ME71 – Pressure Transmitter, microprocessor based Available in Ex-version for Hazardous zone 1, zone 2, ATEX certified ME71 pressure transmitter uses a capacitance type sensor and modern microprocessor technology. It is ideally suited for measuring positive and negative gage pressure in applications where a high degree of accuracy is required. It is optionally available in versions certified for use in hazardous locations. Features

• Robust, wear resistant sensor • High resistance to corrosion, high degree of functionality






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Excellent long term stability, low hysteresis • Not affected by fouling of pressure chambers • Capacitance type silicon sensor • Microprocessor technology • Measuring range: 0-130 mbar to 0-100 bar • Operating temperature: Ambient: -10°C to +70°C; Me dia: 0°C +80°C • Transmitter: 4-20mA (optional: HART interface) • Protection class: IP65 acc. to DIN 60529 • Optional: display, liquid filling

Pressure �� Switch MS10 – Contact pressure vacuum gauge For overpressure and vacuum proof contact pressure gauge for control and supervising purposes in vacuum processes. Application:

• Winning of drinking water, water economy • Process technology • Tero-technology • Pneumatic transporter

Features

• High repeatability • Switching function independent of the indication • Vibration resistant • Long service life, rugged diaphragm system • Measuring range: -200..200 mbar to -1…24 bar • Operating temperature: Ambient: -10°C to +70°C; Me dia: +70°C • Protection class: IP54 acc. to DIN 60529 • Optional: liquid filling, 1 or 2 micro switches

MS11 - Contact Pressure Gauge (for heavy measuring conditions) Contact pressure gauge, especially suited for heavy measuring conditions, e.g. in case of pressure shocks, vibration, numerous or exacting breaking capacity. The separated drive of the indication and switching function guarantees a high operation safety. The pressure chamber and the measuring diaphragm are available in different materials to meet various requirements. Application Fields

• Winning of drinking water • Process technology • Terotechnology • Water economy • Pneumatic transporter






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

Features • 2 change-over micro-switches • High repeatability • Switching function independent of the indication • Vibration resistant • Long service life • Rugged diaphragm system • All measuring ranges overpressure proof to 25 bar • Measuring range: 0..400 mbar to 0…25 bar • Operating temperature: ambient: -10°c to +70°c; me dia: +70°c • Protection class: ip54 acc. To din 60529 • Optional: liquid filling, 1 or 2 micro switches

MS12 - Digital Pressure Switch / Transmitter Compact parameter driven pressure switch / transmitter for positive and negative pressure control. Features:

• Large bright LED display • Selectable pressure units • Optional analogue signal output, with user-programmable scaling,

linearization, inversion, • And offset adjustment • User-defined look-up table for signal conversion, with up to 30 points • Fully programmable from a PC, using the optional Model EU03 PC Adaptor • Measuring range: 0..1.6 bar to 0…60 bar • Operating temperature: Ambient: -10°C to +70°C; Me dia: -25°C +70°C • Protection class: IP65 acc. To DIN EN 60529 • Output: 0/4-20 ma / 0-10 VDC • Display: 3 ½ digit LCD • Switching contacts: 2s set of programmable voltage free relay contacts

Applications:

• Pressure switch / pressure display for inconvenient • Accessible measuring places • Level measurement • Simplified pump control • Monitoring of pumps and compressors






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

TW85 - Weld in Resistance Thermometer For Explosion-hazardous Areas zone 1, zone 2 Resistance thermometers TW85 are applied as intrinsically safe equipment to measure temperature in fluids and gases as well as dusts. These thermometers consist of a protective sleeve with various process connections, a terminal head and - depending on model - an exchangeable gauge slide. All components in touch with process media are leak tested. Pt 100 temperature sensors acc. to DIN EN 60 751 in tolerance classes A or B in 2, 3 or 4-wire circuit are used inside the protective sleeve. Models with 2 measuring circuits are possible. To transfer measurement as standard signal (e.g. 4...20mA) a transmitter can be integrated into the terminal head. Depending on usage and measuring task resistance thermometers can be delivered with various terminal heads. The instruments are solely to be used with provided protective sleeve. Features:

• Measuring element: Gauge slide acc. To DIN 43762 • Max. Media temperature: 450°C •

Insertion tube: dia. 11mm, 165mm long

TA – Expansion thermometer Expansion thermometer TA serves as indicator, monitor and controller. It is used in all industries where temperature shall need to be registered. Features:

• Rugged and vibration resistant measuring system • Moisture resistant bayonet ring case (stainless steel) • High accuracy (class 1 ) acc. to DIN EN 13190 • Very short reaction time • Mechanical working, zero point correction • Suitable for equipment of contact devices • Suitable in combination with Pt100 measuring resistance • Measuring range: -30°C …50°C to 0-600°C

Application:

• Process technology, environment technology • Heating systems, ventilating and air conditioning systems

Temperature �� Transmitter TE01 – Digital Thermometer Electric thermometer with Pt100 sensor. For on-site readout and remote transfer of measurements. Applications:

• Control engineering • Process control • Environmental engineering

Temperature �� Thermometer

• Machine and system construction






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

Features: • Direct measuring sensor • High degree of protection against vibration • High accuracy, low hysteresis • Measuring range: -50°C …0°C to 0-300°C • Protection class: IP54 per DIN 40050 • Display: 3 ½ digit LED • Output: 0-20mA, 3 wire

TE41 – Digital Temperature transmitter TE41 is the latest generation 4-20 mA output digital head transmitter for temperature measurement of fluids and gases. It accepts an input signal from thermocouples (TC), resistance thermometers (RTD), resistance transmitters and voltage transmitters. It is easily installed in any industry-standard terminal head (form B, BUS, BUSH, S79, BBK). Features

• 2-wire 4-20 mA output • Compatible with thermocouples acc. to EN 60584 • Compatible with Pt-100 RTD sensors acc. to EN 60751 (IEC 751. DIN 43760) • Unaffected by EMI • Conform to EMC norms • High accuracy, Very low temperature coefficient • PC programmable • Sealed against moisture / humidity • Sensor fault detection • Thermocouple input: Type: K, J, T, E, L, U, N, C, D, S, B, R, Pt 100/500/1000,

Ni100/500/1000 Applications

• Food processing industries • Heating, ventilation, air-conditioning • Environmental systems • Chemical process industries • Petrochemicals

TE42 – Digital temperature transmitter TE42 is the latest generation 4-20 mA output digital head transmitter for temperature measurement of fluids and gases. It accepts an input signal from resistance thermometers (RTD). It is easily installed in any industry-standard terminal head (form B, BUS, BUSH, S79, BBK). Features:

• 2-wire 4-20 mA output • Compatible with Pt-100 RTD sensors acc. to • EN 60751 (IEC 751, DIN 43760) • Unaffected by EMI • Conform to EMC norms • High accuracy • Very low temperature coefficient • PC programmable • Sealed against moisture / humidity • Sensor fault detection






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Measuring input: Pt100 • Protection class: IP66 / IP 00

Applications

• Food processing industries • Heating, ventilation, air-conditioning • Environmental systems

• Chemical process TK – Long distance expansion thermometer The long distance expansion thermometer TK serves as indicator, monitor and controller.

Features: • Rugged and vibration resistant measuring system • Moisture resistant case • High accuracy (class 1) acc. to DIN EN 13190 • Ambient temperature compensation and zero correction • Suitable for equipment of contact devices • Suitable in combination with Pt100 measuring resistance • Long distance indication using capillary tube transmission line between probe and casing • Measuring range: -30°C …+50°C to 0-600°C

Application: • Process technology, environment technology • Heating systems, ventilating and air conditioning systems

• Food technology Temperature �� Switch TS61 – Temperature Switch TS61 temperature switches are used for monitoring and controlling out-of-limit temperature conditions in heating and cooling systems, in pipes, process vessels, and storage vessels. They are particularly suitable for monitoring, control, and protection of compressors, motors, pumps, hydraulic power systems, plastics processing machines, etc Features

• Failsafe, high current switching capacity (resistive and inductive loads) • Fast response time, Easy to install • Instantaneous snap action switching • Self-resetting • Set point range: 70 ° - 180 °C in 5K steps • Switch point accuracy: ± 5K • Protection class: IP54 per DIN EN 60529 • Vibration resistant per Germanischer Lloyd specifications; Characteristic Curve 2






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

TT – Screw in thermocouples Thermocouples are suited for direct temperature measurement of gaseous and liquid media. The applications of the measuring inserts are not limited to the specified thermocouples. They are adapted to the given request with regard to temperature, length, bending property, vibration resistance and accuracy. In addition to our standard models we provide a lot of special types for special applications. Important characteristics: Thermocouples can be used in many fields of application thanks to the following characteristics:

• Cost-effective measuring principle • Easy signal processing • Possibility of use even at large distances from the measuring point (w. transmitter) • The thermocouples can be equipped with two measuring elements • Easy exchange

Level Sensor NB10 – hydrostatic level probe / well probe Features:

• High measuring accuracy • Low hysteresis • Corrosion-resistant materials • Integrated measurement converter • Measured values stable over time • Measuring ranges: 0-1 m to 0-250 m cable length • Operating temperature: ambient: 0 ° - 70 °C. medi a: 0 ° - 70 °C • Protection class: IP68 as per DIN 40 050 • Output: 0/4-20mA, 2/3 wire

Application:

• Measuring probes for hydrostatic measurement of fluid fill-levels like: • Wells, dams, • Drill holes, bore wells • Waste water systems, containers etc

NC56 – Capacitive level sensor NC56 Capacitive Level Sensor can be used for level measurement of

• Clean water • Waste water and sewage • Diesel fuel • Fire suppression foam

NC56 can be applied to plastic or metal tanks. Features

• Rugged design and construction, IP67 • Built-in electronic signal conversion • Very easy level setting • EC type approval • Remote calibration • Measuring technology: capacitance sensing






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Level measuring range: 400 -2000 mm (or customer defined) • Operating temperature: max. 80°C • Protection class: IP67 • Output: 0/4-20 ma, 0/2-5/10 VDC

Applications

• Manufacturing industries • Process industries • Environmental systems • Vehicular applications • Marine applications

NC57 Capacitive Level Sensor Features:

• Rugged design and construction, IP67 • Built-in electronic signal conversion • Very easy level setting • Remote calibration • Measuring technology: capacitance sensing • Level measuring range: 400 -2000 mm (or customer defined) • Operating temperature: max. 80°C • Protection class: IP67 • Output: 0/4-20 ma, 0/2-5/10 VDC

Applications: The Model NC57 Capacitive Level Sensor can be used in a various applications, for example:


NK06 Level Sensing Probe Unit: Conductivity Type - GL structural tested NK06 series are standardized conductivity type level sensing probe units for detection and control liquid level. An NK 06 level sensor probe is typically used with a Model ER67 (GT76) electronic Control Unit. This combination is suitable for a wide range of level control applications, such as:

• Monitoring minimum or maximum filling levels in vessels • Protection of pumps against dry running • Differentiating oil and water levels within enclosed oil/water separators

The NK06 series are GL approved (Certificate No. 93 825-86 HH) Features:

• Protection class: IP65 • Operating temperature: ambient : -20°C to 80°C, m edia: 60°C • Length of electrodes: customer defined.






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

Tank level sensor NR56 is designed especially for fire engines. It serves as reliable level measurement in foam tanks. Features

• Rugged design and construction, IP67 • Built-in electronic signal conversion • Very easy level setting • Integrated easily into existing vehicle equipment • Sensing technique: resistance dry reed contact chain activated by floating magnet • Measuring level: 250 to 1400 mm (or customer defined) • Operating temperature: -20°C to 70°C • Output: 0/4-20mA, 0/2-5/10 VDC

Applications The tank level sensor model NR56 can be used in a variety of applications areas, for example:


NS01 – level switch, microprocessor enabled NS01 is a microprocessor controlled level switch for liquid or paste-like and adhesive media. Applications:

• Full / empty monitoring in vessels • Pump / dry running protection • Detection of liquid level in vessels and pipes

Features:

• Socket welding system with modular process adaption • Measuring point free of dead space • Adjustable for various media • Materials with contact to media from peek • Comply with FDA, EHEDG • Defined mounting position of screwed cable gland • Operating pressure: 10 bar max. • Operating temperature: ambient -10°c to 70°c, med ia: 0°c to 100°c • Protection class:IP69K

NK10 – level limiter / float switch For Explosion-hazardous Areas zone 1, zone 2 NK10 is applied into heat and process engineering plants to ensure that the lowest permissible level is not fallen below. The instrument meets the requirements of DIN 4574 as limiter. This series’ instruments are structural tested and have received the DIN registration number / prototype test mark of DIN CERTCO (company for validation of conformity). Features

• Temperature resistant up to 400°C • Material in contact with medium of stainless steel • Double wall metal bellows of stainless steel • Varnish heat resistant • Contact switches: 1 or 2

NR56 – Tank Level Sensor






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

Joventa, Germany HVACR, building application (air damper, fire damper)

Actuators – Rotatory, on/off type, Non Springback For safe area, HVAC application, air damper, fire dampers, valves • Torque range: 2 nm – 64Nm

• Power supply: 24VAC/DC, 230VAC • Control: 2/3 point • Angle of rotation: 90° (93° mech) • Run time: 8 sec – 125 sec • With/ without auxiliary switch • With or without potentiometer • without spring back (spring return) • Up to 5 actuators in parallel operation possible • Manual release button • Automatic shut off at end position • IP54 protection (Standard), IP65 • Operating temperature: -20° - +50° C

Product Supply

Voltage Torque Control Signal Position Signal

Running

Time

(sec)

DAB1.4 24V 2Nm 3 point none 36

DAB1.4C 24V 2Nm 3 point none 36

DAD1.4 24V 4Nm 3 point none 72

DAD1.4C 24V 4Nm 3 point none 72

DAN1.N 24V 4Nm 2/3 point none 35

DAN1.SN 24V 4Nm 2/3 point Aux. switch 35

DAN2.N 230 V 4Nm 2/3 point none 35

DAN2.SN 230 V 4Nm 2/3 point Aux. switch 35

DAS1 24V 8Nm 2/3 point none 30

DAS1.S 24V 8Nm 2/3 point Aux. switch 30

DAS1.P1 24V 8Nm 2/3 point 1 k 30

SA1.12 24V 8Nm 2/3 point none 8

SA1.12S 24V 8Nm 2/3 point Aux. switch 8

DA1 24V 16Nm 2/3 point none 80

DA1.S 24V 16Nm 2/3 point Aux. switch 80

DA1.P1 24V 16Nm 2/3 point 1 k 80



DAL1 24V 24Nm 2/3 point none 125

DAL1.S 24V 24Nm 2/3 point Aux. switch 125

DAL1.P1 24V 24Nm 2/3 point 1 k 125

DAG1 24V 32Nm 2/3 point none 140

DAG1.S 24V 32Nm 2/3 point Aux. switch 140

DAG1.P1 24V 32Nm 2/3 point 1 k 140






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

DAS2 230V 8Nm 2/3 point none 30

DAS2.S 230V 8Nm 2/3 point Aux. switch 30

DAS2.P1 230V 8Nm 2/3 point 1 k 30



DA2 230V 16Nm 2/3 point none 80

DA2.S 230V 16Nm 2/3 point Aux. switch 80

DA2.P1 230V 16Nm 2/3 point 1 k 80



DAL2 230V 24Nm 2/3 point none 125

DAL2.S 230V 24Nm 2/3 point Aux. switch 125

DAL2.P1 230V 24Nm 2/3 point 1 k 125

DAG2 230V 32Nm 2/3 point none 140

DAG2.S 230V 32Nm 2/3 point Aux. switch 140

DAG2.P1 230V 32Nm 2/3 point 1 k 140

Actuators – Rotatory, modulating, Non springback For safe area, HVAC application, air damper, fire dampers, valves • Torque range: 2 nm – 64 Nm

• Power supply: 24VAC/DC, 230VAC • Control: 0-10V / 0-20mA • Position signal: 0-10V • Angle of rotation: 90° (93° mech) • Run time: 8 sec – 125 sec • With/ without auxiliary switch • With or without potentiometer • without spring back (spring return) • Upto 5 actuators in parallel operation possible • Manual release button • Selectable direction of rotation • Automatic shut off at end position • IP54 protection (Standard), IP65 • Operating temperature: -20° - +50° C

Product Supply

Voltage Torque

Control

Signal

Position

Signal

Running

Time (sec)

DMB1.2 24V 2Nm 0…10V none 36

DMD1.2 24V 4Nm 0…10V none 72

DMN1.2 24V 4Nm 0…10V 0…10V 35

DMS1.1 24V 8Nm 0…10V 0…10V 30

DMS1.1S 24V 8Nm 0…10V 0…10V, HS 30

DM1.1 24V 16Nm 0…10V 0…10V 80

DM1.1S 24V 16Nm 0…10V 0…10V, HS 80

DML1.1 24V 24Nm 0…10V 0…10V 125

DML1.1S 24V 24Nm 0…10V 0…10V, HS 125






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

DMG1.1 24V 32Nm 0…10V 0…10V 140

DMG1.1S 24V 32Nm 0…10V 0…10V, HS 140

Actuators – Rotatory, Springback, On/off For safe area, HVAC application, air damper, fire dampers, valves

• Torque range: 6 nm – 20 Nm • Power supply: 24VAC/DC, 230VAC • Angle of rotation: 90° (93° mech) • Run time: 8 sec – 125 sec • With/ without auxiliary switch • With or without potentiometer • Upto 5 actuators in parallel operation possible • Manual release button • Selectable direction of rotation • Automatic shut off at end position • IP54 protection (standard), IP65 • Operating temperature: -20° - +50° C

Product Supply

Voltage Torque Control Signal

Position

Signal

Running

Time (sec)

DAF1.06 24V 6Nm 2 point none 10...40

DAF1.06S 24V 6Nm 2 point Aux. switch 10...40

DBF1.06 24V 6Nm 3 point none 10...40

DBF1.06S 24V 6Nm 3 point Aux. switch 10...40

DAF1.08N 24V 8Nm 2 point none 55…71

DAF1.08SN 24V 8Nm 2 point Aux. switch 55…71

DBF1.08N 24V 8Nm 2/3 point none 55…71

DBF1.08SN 24V 8Nm 2/3 point Aux. switch 55…71

DAF1.10 24V 10Nm 2 point none 24…57

DAF1.10S 24V 10Nm 2 point Aux. switch 24…57

DBF1.10 24V 10Nm 2/3 point none 150

DBF1.10S 24V 10Nm 2/3 point Aux. switch 150

DA1.F 24V 16Nm 2 point none 90…120

DA1.FS 24V 16Nm 2 point Aux. switch 90…120

DA1.4F 24V 16Nm 3 point none 90…120

DA1.4FS 24V 16Nm 3 point Aux. switch 90…120



DBF1.20 24V 20Nm 2/3 point none 150

DBF1.20S 24V 20Nm 2/3 point Aux. switch 150








Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

DAF2.08N 230V 8Nm 2 point none 55…71

DAF2.08SN 230V 8Nm 2 point Aux. switch 55…71



DA2.F 230V 16Nm 2 point none 90…120

DA2.FS 230V 16Nm 2 point Aux. switch 90…120


DAF2.20S 230V 20Nm 2 point Aux. switch 24…57 Actuators – Rotatory, Spring back, modulating For safe area, HVAC application, air damper, fire dampers, valves

• Torque range: 6 nm – 20 Nm • Power supply: 24VAC/DC, 230VAC • Control: 0-10V / 0-20mA • Position signal: 0-10V • Angle of rotation: 90° (93° mech) • Run time: 8 sec – 125 sec • Upto 5 actuators in parallel operation possible • Manual release button • Selectable direction of rotation • Automatic shut off at end position • IP54 protection (standard), IP65 • Operating temperature: -20° - +50° C

Product Supply

Voltage Torque

Control

Signal

Position

Signal

Running

Time (sec)

DMF1.06 24V 6Nm 0..10V 0..10V 10…40

DMF1.06S 24V 6Nm 0..10V 0..10V, HS 10…40

DMF1.08N 24V 8Nm 0..10V 0..10V 55…71

DMF1.08SN 24V 8Nm 0..10V 0..10V, HS 55…71

DHF1.10 24V 10Nm 0..10V 0..10V 150

DHF1.10S 24V 10Nm 0..10V 0..10V, HS 150

DM1.1F 24V 16Nm 0..10V 0..10V 60

DM1.1FS 24V 16Nm 0..10V 0..10V, HS 60

DMF1.20 24V 20Nm 0..10V 0..10V 150

DMF1.20S 24V 20Nm 0..10V 0..10V, HS 150

Actuators – Mixer (on/ off, modulating) For safe area, HVAC application, air damper, fire dampers, valves

• Torque range: 16 nm • Power supply: 24VAC/DC, 230VAC • Control: 0-10V / 0-20mA • Position signal: 0-10V • Angle of rotation: 90° (93° mech) • Upto 5 actuators in parallel operation possible • Manual release button






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Selectable direction of rotation • Automatic shut off at end position • IP54 protection (standard), IP65 • Operating temperature: -20° - +50° C

Product

Supply

Voltag

e

Torque Control

Signal

Position

Signal

Running

Time (sec) Type

MA1 24V 16Nm 2/3 point None 120 on/off

MA1.S 24V 16Nm 2/3 point Aux. switch 120 on/off

MA2 230V 16Nm 2/3 point None 120 on/off

MA2.S 230V 16Nm 2/3 point Aux. switch 120 on/off

MM1.1 24V 16Nm 0-10V 0-10V 120 Modulating

MM1.1S 24V 16Nm 0-10V 0-10V 120 Modulating

Greisinger Portables, transmitter – moisture, pH, redox etc

Multi-point hay temperature measurement Typ electronic 0150 Fire prevention at self heating of feed by permanent observation of the temperature trend in stored harvests like straw,hay, crop etc

• rugged stainless steel design • 3 measuring points alongside probe • glow and fire zone detection • Measuring range: -20°C to +150°C • Resolution: 0.1°C • Display: 3½-digit, 13mm high LCD-display

Material Moisture Measuring Device GMH 3830 For cut wood, , sawdust, wood chips, wood wool, , straw, hay, concrete, gas concrete, bricks, limestone mortar, paper, textiles etc

• 466 wood characteristic curves • 28 building material characteristic curve • moisture estimation • display of moisture content u or wet-basis moisture content w • external temperature probes connectable • serial interface or analog output 0-1V, freely adjustable • Future-proof via updates DIN 1052 • Characteristic curves: 494 • Measuring range: • moisture: 0.0 to 100.0 % moisture content (depending on characteristic curve) • temperature: -40.0...+200.0°C • Display: two 4 digit LCDs






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

Residual oxygen measurement GMH 3691 GOG For quick and cost-effective measurement of residual oxygen in packaging industry,food industry

• Meas. range: 0,0 to 100.0% O2 • Oxygen probe: Oxygen-partial pressure probe • Built in external sensor housing • Response time: T90 < 10 sec, depending of temperature • Working temperature: 0 to 50°C (sensor), -20 to 5 0°C (device) • Relative humidity:0 to +95%RH (non-condensing)

Non-contact temperature measurement IR-CT 20

• Rugged and applicable without cooling up to 180°C ambient • Adjustable emission factor • Freely scaleable analogue output 0(4)-20mA, 0-10V, thermocouple

type J or K • Illuminated liquid crystal display • Measuring range:-40 to +900°C (freely scaleable) • Spectral sensitivity: 8 - 14 µm • Optic resolution: 20:1 (precision glass optics) • Temperature resolution: 0.1°C • Response time: 150 ms (95%)

Water level / well probe Tank level measure GBS 01 /GBS 02 Suitable for permanent level measuring in tanks, rivers, lakes, drinking-water wells, drilling holes, waste water plants and For measuring the level of fuel and other aggressive media.

• Meas. ranges: 1 to 250 m water column • Overload (bar): 80 • Output signal: 4-20 mA / 0-10 V • Operating temperature: -10 to+85°C • Housing: chromium-nickel alloy 1.4571.

Dissolved oxygen Transmitter OXY 3610 MP for dissolved oxygen in liquids

• Measuring ranges: o oxygen conc: 0.00 to 25.00 mg/l (dissolved) o temperature: 0.0 to 50.0 °C

• Output signal (only 02): 4 - 20 mA (2-wire - standard) • 0 - 10 V (3-wire - option)

• Working condition: 0 to +50 °C, 0 to +95 %RH (non -condensing) • Display: approx. 10 mm high, 4-digit LCD-display






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

pH-measuring transducer GPHU 014 MP automatically and manually temperatur compensation

• External Pt1000-temperature probe connectable • Sensor input electrically isolated • Measuring range: 0.00 to 14.00 pH • Accuracy: 0.02 pH ±1 digit (at nominal temperature = 25°C) • Output signal: 4 - 20 mA (2-wire, standard), 0 - 10 V (3-wire, optional) • Electrode: any standard pH electrode is suitable. • Temperature compensation: -30 to 150°C, • Display: approx. 10 mm high, 4-digit LCD-display • Working temperature: 0 to +50 °C • IP rating: IP65

Redox-measuring transducer GRMU 2000 MP

• Measuring range: ±2000 mV • Accuracy: 0.2 % FS (at nominal temperature = 25°C ) • Output signal: 4 - 20 mA (2-wire) • Working temperature: 0 to +50 °C (electronic) • Housing: ABS (IP65)

Conductivity measuring transducer GLMU 200 MP incl. 2-pol measuring cell GLMU 400 MP incl. 4-pol measuring cell compact conductivity measuring cell

• Output signal freely scaleable • Adjustable cell constant • Selectable temperature compensation mode • On site display for the conductivity or temperature • Conductivity: 0.0 - 200.0 µS/cm to 0 - 500 mS/cm • specific resistance: 5.0 - 100.0 kOhm*cm to 1.00 - 50.00 Ohm*cm • TDS: 0.0 - 200.0 mg/l to 0 - 200 g/l • Salinity: 0.0 - 70.0 • Temperature meas.: -5.0 to +140.0 °C (transducer) , 0.0 to +80.0 °C (meas. cell) • Measuring cell: 2-pole / 4-pole measuring cell • Meas. cell connection: 7-pole diode connector • Display: approx. 10 mm high, 4-digit LC-display • Output signal: 4 - 20 mA (2-wire) standard • Housing: ABS (IP65)






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

Jola, Germany Solution for level and leakage monitor and control

Level Sensor & Controller SSP… and SI/SSP/NL/1/K/… variant Mercury-free floating switches Also available in Ex version, ATEX certified These floating switches are designed for mounting from the side or from the top.

Features: • Switching voltage: AC / DC 24V -230 V • Operating principle: ball-operated micro-switch, potential-free

changeover contact • Float material: PP • Seal material: FPM or EPDM • Protection class: IP68

SSX… and SI/SSX/LF/4/1/K/TPK variant Mercury-free floating switches Also available in Ex version, ATEX certified These floating switches are designed for mounting from the side or from the top.

Features: • with external/ internal fixing weight (for optimal functioning) • switching voltage: AC/DC 24V – 250 V • operating principle: ball-operated micro-switch, potential-free changeover contact • Float material: PP • Seal material: FPM or EPDM • Protection class: IP68

SS/PTFE 55/A 3/K and SS/PTFE 55/A 1/K Mercury-free floating switches Also available in Ex version, ATEX certified These floating switches are designed for mounting from the top. Features:

• switching voltage: AC/DC 24V – 250 V • operating principle: ball-operated micro-switch, potential-free

changeover contact • Float material: PTFE • Seal material: FPM • Protection class: IP68






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

TS/O/. Mercury-free immersion probes Also available in Ex version, ATEX certified These immersion probes consist of a probe tube on which one or several floating switches are mounted and of a terminal box to which the floating switches are connected. These units are particularly suitable for fuel oil tanks, diesel fuel tanks, hydraulic oil tanks etc. Features:

• probe tube material: PP • Probe tube diameter: 16 mm – 25mm • Mounting orientation: vertical • Mounted floating switches: SSP

SM.. Float switches Also available in Ex version, ATEX certified The rising and falling liquid level causes the float to move slightly up or down. When the float rises, it activates a micro-switch. Features:

• Switching voltage: AC/DC 24V – 250 V • Operating principle: micro-switch, changeover contact • Bellow material: PP • Float material: PTFE • Float dimensions: cylindrical float, 29mm X 133 mm to 63mm X 140 mm; ball float (optional) • Protection class: IP68 • Temperature range: 0-100° C

TSR.. immersion probe Also available in Ex version, ATEX certified Magnetically operated liquid level controllers TSR immersion probes have a probe tube with built-in mono-stable reed contacts. The float is fitted with a permanent ring magnet and moves freely up and down the probe tube, activating the reed contacts as it rises and falls. Features:

• Switching voltage: AC/DC 24V – 250 V • Probe tube material: SS 316 Ti • Probe tube diameter & length : Ø 12mm, customer specified • Float: SS 316 Ti, Ø 73 mm(ball) or Ø 44.5 mm X 52 mm to Ø 90 mm X 60 mm • Protection class: IP68 • Temperature range: -20°-100° C • Max. no. of contacts: 3 / 6

HMW/3/.. and HMW/1/.. magnetic switches These magnetic switches are accommodated in a housing which can be fastened to a pipe by means of a pipe clip which is attached to the housing. The housing contains a connection terminal and a micro-switch; a magnet is fixed to the lever of the latter. When the magnetic switch is installed and the magnet on the micro-switch level is activated by a magnet moving up and down in the pipe, this changes the position of the micro-switch lever and an electrical circuit is created.






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

The magnetic switches have so-called bistable characteristics; i.e. They remain in the switching status caused by the influence of the passing magnet and only switch over when the magnet passes by in the opposite direction. Features:

• Switching voltage: AC/DC 24V – 250 V • Housing: PP, approx. 65 x 50 x 35 mm • Protection class: IP65 • Pipe clip material and clip diameter: 28-60, SS or PP • Temperature range: 0°-60° C

HA/… level indicators These level indicators allow direct read-off of a liquid level based on the system of communication tubes in the sight-glass of the unit. The unit is fitted with 3 taps (2 taps to separate the unit from the tank, 1 tap for discharge of the liquid). These magnetic switches can be attached to the sight-glass of the HA/.. level indicator. In this case, a float made of PP with a built-in magnet must be inserted in the tube. Features:

• Tap material: SS 316 Ti or PP • Sight-glass material: Duran glass or transparent PVC • Mounting orientation: vertical • Temperature range: 0-+60° C

NVM/PP/.. level controller Magnetically operated liquid level controller These level controllers are fitted with a float, a float rod, a guide tube made of transparent PVC and a magnet. The float follows the level of the liquid and moves the float rod of the unit up and down. Above the nipple the guide tube is attached for the float rod and the magnet. Adjustable HMW/./32 magnetic switches are mounted on the outside of the tube. These magnetic switches have a so-called bi-stable characteristic; i.e. they remain in the switching status caused by the influence of the passing magnet and only switch over when the magnet passes by in the opposite direction. Features:

• Float material and dimensions: PP, Ø 63 X 140 mm, Ø 85 mm (ball) • Float road material: SS 316Ti or titanium • Mounted magnetic switches: HMW/3/32 or HMW/1/32 • Max. no. of magnetic switches: as required • Mounting orientation: vertical • Temperature range: 0-+60° C






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

Detector and controller for conductive liquids: These controllers are used for the automatic control of pumps or solenoid valves as well as for overflow or run-dry protection in wells or tanks with electrically conductive liquids. The liquid levels are monitored by electrodes which give switching commands to the electronic relay depending on contact with the liquid. For the two-point control, two control electrodes and one earth electrode are required. Signalling of one liquid level requires one control electrode and one earth electrode. A metallic, conductive tank wall can be used as an earth connection in place of the earth electrode. Suspension Electrodes:

• Design: 1 control electrode or 1 earth electrode • Electrode rod (s): SS 316 Ti • Housing: PP , Duroplast, SS 316 Ti • Mounting orientation: vertical • Temperature range: 0-+60° C

Rod Electrodes:

• Design: 1 control electrode or 1 earth electrode • Electrode rod (s): SS 316 Ti, Ø 4mm, covered with polyolefin shrink-down

tubing • Length: 30mm min, 2500 mm. max. • Mounting orientation: vertical • Temperature range: 0-+60° C

Rod Electrodes: • Design: 2-4 control electrode and 0-1 earth electrode • Electrode rod (s): SS 316 Ti, Ø 4mm, covered with polyolefin shrink-down

tubing • Length:: 2500 mm. max • Mounting orientation: vertical • Temperature range: 0-+60° C

Leakage detector Also available in Ex version, ATEX certified. For detection of conductive liquids (e.g. water, ..) Plate electrodes and Cable electrodes For the signalling the presence of a conductive liquid caused, for example, by burst pipe, spill over, leakage etc. Plate and cable electrodes can, for example, be used on normally dry floors or false ceileing or in normally dry pipeline and cable ducts Cable electrodes can also be used alongside pipes or in double-pipe systesm. If the two electrode plates of a plate electrode or the two sensor cables of a cable electrode come into contact with a conductive liquid (e.g. water, acid etc) an electrical contact is made and an alarm signal is given. Plate electrodes:

• Design: 1 control electrode and 1 earth electrode • Electrode plate material: SS 316 Ti • Length between last electrode and electrode relay: 1000 mm. max • Cable break monitoring: without / with • Temperature range: -20° -+60° C






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

Cable electrodes:

• Design: 1 control electrode and 1 earth electrode • Sensor cables: 2 ropes made of SS 316 or 316 Ti, each Ø 3mm, each

covered by a halogen-free protective polyester sheath; length: 2m each (longer on request)

• Cable break monitoring: without / with • Temperature range: -20° to +60° C

For detection of conductive liquids (e.g. water, ..) and non-conductive liquids (eg. Oils, HSD, diesel etc) These sensors permit to detect all organic and inorganic liquids with a specfic dielectric contact between 1.8 and 109, for instance the presence of fuel oil on the floor of a tank room or in a collection tub located underneath a fuel oil burner. They should only be used in normally dry surrondings.

• Housing: SS 316 Ti and PTFE or PP and cast resin • Functional principle: capacitive sensor with SS cylindrical capacitor or capacitive

sensor with gold-plated capacitor plate on epoxy resin backing material • Protection class: IP65 • Temperature range: -20° -+60° C

Floating electrodes For detection of a thin layer of non-conductive luquids with a lower specific gravity on the top of conductive liquids with a higher specfic gravity. Eg. Oil on water.

• Design: 1 control electrode and 1 earth electrode • Electrode rods: SS 316 Ti, Ø 4 mm, coated with shrink-down tubing

made of polyolefin or PVDF • Length of connecting cable: 2m or longer on request • No. of float: 4 made of PP or SS • Temperature range: 8° -+60° C

Beck Sensors Product Guide Pressure sensor for air, clean gases

Pressure switches: Model: 901 Also available in Ex version, ATEX certified for hazardous zone Features:

• Measuring range: overpressure: 0 – 20 mbar to 0-12 bar vacuum pressure: -5 - -20mbar to 0 - -900 mbar

• Permissible media: liquids, gases – also aggressive media • Adjustable switching knob: with or without • Temperature range: ambient: -20° -+60° C, media: 0 ° -+130° C • Protection class: IP44 / IP54 / IP65






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

• Certification: Low Voltage Directive 2006/95/EC; RoHS Directive 2002/95/EC; ATEX Directive 94/9/EC; Product types tested by TÜV Südwest

Differential pressure switch

Model: 901 Also available in Ex version, ATEX certified for hazardous zone Features

• Measuring range: 0 – 50 mbar • Permissible media: liquids, gases – also aggressive media • Adjustable switching knob: with or without • Temperature range: ambient: -20° -+60° C, media: 0 ° -+130° C • Protection class: IP44 / IP54 / IP65 • Certification: Low Voltage Directive 2006/95/EC; RoHS Directive 2002/95/EC; ATEX Directive

94/9/EC; Product types tested by TÜV Südwest Application:

• Industrial application – oil & gas, chemicals, petrochemicals • Water flow & pressure monitoring • Flow monitoring • Food processing, beverages etc

Model: 930 Also available in Ex version, ATEX certified for hazardous zone Features

• Measuring range: 0 – 200 Pa to 0-4000 Pa • Permissible media: air, clean gases, non aggressive gases. • Adjustable switching knob: with or without • Temperature range: ambient and media: -20° -+85° C • Protection class: IP54 • Certification: Low Voltage Directive 2006/95/EC; RoHS Directive 2002/95/EC; ATEX Directive

94/9/EC Application:

• Monitoring air filter and ventilators • Monitoring industrial cooling-air circuits, air-conditioning • Controlling air and fire protection flaps • Monitoring flow in ventilation ducts

Differential pressure transmitter Model: 984m 984M series are used to measure differential pressure, overpressure and vacuum. They provide 2 pressure ranges and 2 output signals, which are selectable using a jumper. Features

• Configurable pressure range, response time, volume flow measurement. • Measuring range: dual jumper selectable range, 0 – 100 Pa to 0-250 kPa • Permissible media: air, clean gases, non aggressive gases. • Signal output: 0-10 V and 4-20mA • Temperature range: ambient and media: 0° …+50° C • Protection class: IP54 • Optional display, selectable response time






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513






Devi Nagar

302019 (India)

.gasalarm.com.au



NSW 2147, Australia



Tel No.: +61-2 983



NSW 2147, Australia



838 7220 / +61-4 1128 7513


Tel No.: +91-141-2293-968

Alvi automation(gas alarm) product brochure 2016

Data & Analytics

Transcript of Alvi automation(gas alarm) product brochure 2016