Alquat BBA
-
Upload
palan-madhukant -
Category
Technology
-
view
215 -
download
4
description
Transcript of Alquat BBA
ALQUAT - BBA
(2009-2010)
ALQUAT BBABleach Bath Accelerator
ALQUAT BBAA unique catalyst & desorbing agent designed
to greatly accelerate action of chlorine bleach
on Indigo.
It performs synergistically
when used in chlorine
bleach processes; enabling
substantial reductions in
chlorine bleach
concentrations, bleach
cycle time and/or process
temperatures to achieve a
given shade.
PROPERTIES:
PHYSICAL APPEARANCE : BUFF COLORED POWDER
IONIC NATURE : NONIONIC
PH OF 1% SOLUTION : 7.5 ± 1
MISCIBILITY : DISPERSIBLE IN WATER
COMPATIBILITY : COMPATIBLE WITH NONIONIC,
ANIONIC & CATIONIC
STABILITY : STABLE
ALQUAT BBA
Features:
Ensures over 50% reduction in chlorine bleach concentration & also half the reduction in time to achieve the same bleach effects.
The reduction in dosage of Sodium hypochlorite and Processing time results in following benefits.
•Reduced fabric damage
ALQUAT BBA
•Lower localized abrasion and streak marks
•Reduced quantities of antichlor and peroxide in subsequent steps
•Reduced quantities of objectionable gases and odour in the local environment
ALQUAT BBA
Benefits:
Substantial reduction in bleach cycle time allowing for improved productivity.
Bleaching process at lower temperatures allowing savings in fuel costs & energy costs.
Vastly reduced effluent quantities
“Ecofriendly” & “environmentally safe”.
ALQUAT BBABenefits in processing of tencel blends:
Tencel is a regenerated cellulosic fibre, advantageously used with cotton to give improved aesthetics and comfort. However tencel is easily damaged while bleaching with Sodium hypochlorite.
Alquat BBA reduces the damage to the blended garment due to the reduction in the processing time as well as reduction in the damage due to Sodium hypochlorite solution.
It also lowers the excessive fibrillation of tencel, which normally requires a biopolishing operation to be carried out subsequently
Application:
It is a highly active chlorine bleach accelerant, & hence small amounts are sufficient to permit a high percentage reduction in chlorine bleach concentration.
As a starting point, use 1.0-2.0% . Alquat-BBA & cut the amount of chlorine bleach by 50%. Other modifications of the bleach cycle, such as time should be made after the initial evaluations. Add the Alquat-BBA to the bath and agitate to uniformly disperse throughout the load prior to addition of the chlorine bleach. Peroxide neutralization may be required if whiter, brighter shades are desired.
ALQUAT BBA
L. N. CHEMICAL INDUSTRIES
OFFICE ADDRESS :-150 Adarsh Industrial Estate,Sahar Road, Chakala, Andheri (E), Mumbai – 400 099
Tel.- 91- 22- 4221 6789 (30 Lines) 91- 22- 2834 7513 91- 22- 6692 4112Fax -91-22- 2836 6434
FACTORY ADDRESS :-D- 14 /10, T.T.C. M.I.D.C Industrial area,Turbhe , P.O.K.U.Bazar,Navi Mumbai – 400 705
Tel.-91- 22- 4141 9899 (30 Lines)Fax -91- 22- 4141 9888
Email ID – [email protected] [email protected]