AL BINAA AL AALI | Building Your Dreams

8/13/2019 AL BINAA AL AALI | Building Your Dreams

1/20

[email protected] | +971-5-568413

AL BINAA AL AALI Building Your Dreams 1

Building your dreamsINDEX

Chapter IInfrastructureCompany over view 02

Organization Chart 03

Chapter IICollections

Designs & Patterns 11

Edge & Boundaries 14

Chapter IIIProcessing SafetyProcessing cycle 16

hapter iv Contact 19


2/20



Company over View:

AL BINAA AL AALI is a private organization that was formed in 2012 and has established a strong foot hol

in the UAE market as a supplier and retailer of marble, granite, bluestone, sandstone, engineered stone, porcela

and ceramic tiles.

The products are sourced from countries

such as China, Italy, Turkey, India and Pakistan

which are the major producers of material

commonly consumed in the UAE market. AL

BINAA AL AALI products are distributed UAE wide

due to our capacity of stock holding and diversity.

AL BINAA AL AALI currently supplies more than 30

retail outlets and also has a relationship with the

Oman market.

As AL BINAA AL AALI expands, we have

increased our marketing and sales staff to meet

the demands creating a combined experience.

Our staff is fully equipped to answer your questions and offer assistance regarding your stone tile needs.

AL BINAA AL AALI has what you need to add that luxury touch to your indoor or outdoor tiling needs on

domestic or commercial level. As an importer wholesaler, distributor and retailer AL BINAA AL AALI stocks a broa

range of products such as Marble tiles and slabs, Limestone tiles and slabs as well as many other types of natur

stone such as: Granite, Travertine, Bluestone, Engineered stone, Laminated Stone and Sandstone. We also stock

wide range of Porcelain tiles and Ceramic tiles. We have it all in a variety of sizes and finishes not to mention a

extensive range of Wall Cladding, Mosaic tiles and Cobblestone.

AL BINAA AL AALI provides a vast amount of material for projects UAE wide.

Objective:

To introduce and lead the market in the importation and distribution of products.

Mission:

Our mission is providing best quality products and services at a reasonable rate

Polished Marble Tiles Whether you need marble tiles, marble slabs, limestone tiles or any other type of

stone our experienced and knowledgeable sales team can assist you to find the perfect product for your project

from design stage to completion.


3/20



Board of Directors

General Manager

Sales & Marketing

Manager

Foreman

Logistics Manager Finance & ADM ManagTechnical

Manager

Development officer

Stock Keeper

Skilled & unskilled workers

Designer


4/20



Collections

Marron Travertine # TR1 White Travertine # TR2 Yellow Travertine # TR3 Red Travertine # TR

Supper White # TR5 Statuary # MR6 Blanco Perlino # MR7 Green # MR8


5/20



New Rosa Levanto # MR -

9Mimosa # MR10 Breccia Oniciata # MR11 Moca Cream # MR1

Norwegian Rose # MR 13 Light Emperador # MR14 Forest rain brown# MR15 Sally Beige # MR16

Volakas # MR17 Crema Marfil # MR18 Rosa Verona # MR 19 Dark Emperador # MR - 20

Sunny # MR21 Tea Rose # MR22 Limestone # MR23 Silvia # MR24


6/20



Galala Beige # MR25 Mila Beige # MR26 Arabascato # MR27 Moonlight Beige # MR28

Honed filled # TR29 Brushed # TR30 Tumbled # TR31 Aegean rose # MR-32

Premium beige # MR-33 Black emperador # MR34 Cloudy beige # MR-35 White # MR-36


7/20



Desert Rose # LM37 Shelly bone # LM38 Sesamy Limestone # LM-39 Light Tumbled Beige # MR-4

Light Beige # MR-41 Light Flamed Beige # MR- 42 Gold Beige # MR43 Red Beige # MR-44

Mysia Beige # MR-45 Dark Beige # MR-46 Crema Barla # MR-47 Dark Emperador # MR-48

Light Emperador #MR-49 Sugar Beige # MR50 Burdur Beige # MR-51 Afyon Dark Galaxy # MR-52


8/20



Afyon Cream Galaxy # MR-53 Savana Gray # MR-54 Rosa Beige # MR55 Black # MR-56

Afyon # TR-57 Noce # TR-58 Noce Dark # TR-59


9/20



Crystal white # MR-60 Passion pulpis # MR-61 Romance safari # MR-62 Via Tornabuoni # MR-63

Via Condotti # MR-64 Via Montenapoleone # MR-65 Bianco Leuca # MR-66 Beige Ostuni # MR-67

French Beige # MR68 Aman Beige # MR 69 Bottcino # MR70 Mum Beige # MR71

Langdok # MR72 Dark Emperado # MR73 Gohare Beige # MR74 Portoro # MR75


10/20



Jafar Beige # MR76 Golden Moca Crema # MR77 Thassos White # MR78 Perlato Svevo # MR79

Sahara# MR- 80 Golden Green # MR-81 Golden Black# MR-82 Indus Gold # MR-83

Sunny Gray # MR-84 Verona Plane # MR-85 Sahara Beidge # MR-86 Green # MR-87


11/20




12/20



ABAA#01 ABAA#02 ABAA#03


13/20







14/20



Edge Boundaries:


15/20




16/20



The marble and granite manufacturing process contain the following steps.

GANGSAWING

Slabs of different thicknesses come out sawn from each block by the use of diamond blades set on a pow

loom through vertical gang saws working at a sawing speed varying from the 4cm/h for the hardest granite to th

40cm/h for the softest limestone.

The cutting speed and the sawing characteristic of the diamond blades are differently set every time on th

basis of the demanded thickness and of the physical and technical peculiarity of each stone, so as to avoid t

collapse of the block during the gangsawing.

HAND RESIN GLUEING

In order to make harder weak and widespread veined structured marbles it is necessary to exploit the mode

technology of the epoxy resin as well as the hands of skilled workers able to glue the most broken material maki

its structure as hard as possible. This phase is very important, since it makes possible the use of stones of beautif

color shades that otherwise should not be employed in the building field.

REINFORCING

After the hand resin gluing the reinforcing phase is due to render the flexural strength of veined marbl

higher. An epoxy resin is poured on the back side of the marble slab so that during oven-drying catalyzing the har

resin fills in all the natural micro holes of the stone. The marble is also reinforced by a glass fybre wires net glued bresin on the back side of each weak slab.

AUTOMATIC RESIN FILLING

The plant for automatic epoxy resin filling has been the first cause of ABAA success in high quality marb

manufacture. Colored epoxy resins are sprayed and spreader all over the front side of the slabs, the catalyzin

process goes on inside a vertical line of drying ovens. The mixture of the resins is made on purpose for each


17/20



material, due to its peculiarity in color, vein, porosity and strength; the resin mixture definitely fills in all the mic

holes in the marble slab, making it many times stronger than its natural. Through this manufacture the cycle

strengthening of the marble slab is completed and so beautiful colored materials become suitable to an architectur

use.

SLABS LINE POLISHING

The stone slab is naturally mat, to make it brilliant you have to polish it by a surface abrasion process. Th

first step of this phase is setting each slab properly on the line, than washing it at a high pressure in order to cleaevery trace of dust. The roller conveyor carries on the slab into an oven-drying section, and then the entire resin an

glue residue are removed. After oven-drying the real polishing activity begins: while carried over the roller convey

the slab is subject to the rotating pressure of the polishing heads set in increasing order of sharpness. The final wa

and the quality visual control complete the polishing manufacturing phase. Coming out from the polishing line eac

slab is protected by a plastic film and recomposed in the original block, in order to preserve the color uniformity

the parcel.

Polishing is just one of the surface finishing treatment for marble, granite, limestone and travertine, ev

though it is the most employed, the other frequently used surface finishing treatments are:

o HONINGo FLAMINGo ANTIQUE FINISHINGo SAND FINISHINGo BUSHHAMMERINGo CLEAVING


18/20



CUTTING

The cutting phase is the most various since the final product can assume the most different shap

customized on each client's specifics. ABAA has 4 cutting machines for diamond disk cutting and an automa

CAM molding machine.

"CUT-TO-SIZE" POLISHING

It is often necessary to re-polish pieces after their cut to make them perfect. A special machine is dedicated

this aim.

FINAL QUALITY CONTROL AND PACKAGING

Making remarkable projects imposes a severe quality control of manufacture and materials, so that ea

piece of product receives the finishing touch by hand and it is marked on its back by its identification number so

to be properly set in the assembly plan of each project; then the pieces are packed in wooden crates made on purpo

and protected by polystyrene sheets and/or plastic film.


19/20



Contact:

Address:House 18, Road No. 23, Industrial Area 15, National Paint R/A,, SharjahUAE

Office:+971-6-5347086

Cell:+971-5-56841303, +971-5-69087408

Fax:+971-6-5347087

Email:[email protected], [email protected], [email protected]

Web:www.binalaali.com


20/20


20

AL BINAA AL AALI | Building Your Dreams

Documents

Transcript of AL BINAA AL AALI | Building Your Dreams