17

AEROSPACE QUALITY SYSTEMS (AQS)

(Susan Frailey, +1 618 615 4478, sfrailey@sae.org) (John Barrett, +1 724 991 3274, barrett@sae.org) (Mike Gutridge, +1 740 587 9841, mikeg@sae.org)

The Aerospace Quality Systems Task Group is conducting audits to demonstrate compliance to the PRI AC7004. This quality system audit is required where no existing quality system approval exists in accordance with the Nadcap Operating Procedure NOP-002.

TASK GROUP VOTING MEMBERS Subscriber Voting Members Patrice Bleau Bombardier, Inc. UVM Robert Bodemuller Ball Aerospace & Technologies UVM Robin Borrelli The Boeing Company VCH/UVM Mark Covert Honeywell Aerospace UVM David Day GE Aviation CHR/UVM (Chair – October 2010)

Warren Ferree 309th Maintenance Wing-Hill AFB UVM Harold Finch Spirit AeroSystems, Inc. UVM/SEC Aaron Havlovic Cessna Aircraft Company ALT/UVM Keith Kastner Cessna Aircraft Company UVM Angelina Mendoza UTC Aerospace Systems UVM

Earl Pruett Lockheed Martin Corp. UVM Andre Roy Bombardier, Inc. ALT/UVM Dave Vaughn Spirit AeroSystems Inc ALT/UVM Patricia Wesemann The Boeing Company ALT/UVM George Winchester Northrop Grumman Corporation UVM

Supplier Voting Members Mark Brown Kaman Aerospace Corp - Jacksonville SVM

Jim Tuminello Tech Met SVM

18

AEROSPACE QUALITY SYSTEMS (AQS) (Susan Frailey, +1 618 615 4478, sfrailey@sae.org) (John Barrett, +1 724 991 3274, barrett@sae.org) (Mike Gutridge, +1 740 587 9841, mikeg@sae.org)

AQS LIAISONS

Robin Borelli The Boeing Company COMP Task Group Bruce Brownfield Lockheed Martin Corp. HT Task Group Mike Coleman The Boeing Company CP Task Group Mark Covert Honeywell Aerospace NMSE Task Group David Day GE Aviation CMSP Task Group

Harold Finch Spirit AeroSystems Inc WLD Task Group John Nerz GE Aerospace CT Task Group Scott Sullivan Honeywell Aerospace NDT Task Group Barbara Waller Raytheon ETG Task Group

19

CHEMICAL PROCESSING (CP) (Mike Graham +1 724 772 8646, graham@sae.org) (Bill Dumas +1 724 772 8673, billdumas@sae.org)

(Nigel Cook, +44 870 350 5011, nigel.cook@pri-europe.org.uk) (Robert Lizewski, +1 724 772 8681, lizewski@sae.org) (William Calvert +1 724-772-8524, wcalvert@sae.org)

(Robert Nixon +1 724-772-8596, rnixon@sae.org)

The Chemical Processing Task Group is conducting audits to demonstrate compliance to the AC7108 series of documents. These audits address the following types of processes: • Anodizing • Chemical Cleaning • Chemical Milling • Conversion/Phosphate Coating

• Etching • Laboratory Evaluation • Paint/Dry Film Coatings • Plating

• Stripping • Surface Prep Prior to Metal Bond • Surface Treatment/Passivation • Vacuum Cadmium & Aluminium IVD

TASK GROUP VOTING MEMBERS

Subscriber Voting Members Hal Abel Raytheon RMS (Missile Systems) UVM Cary Baker The Boeing Company ALT/UVM Susan Baker The Boeing Company ALT/UVM David Burke BAE Systems, Inc. UVM Craig Bowden BAE Systems – Military & Air Information (MAI) ALT/UVM Bob Cashman Parker Aerospace UVM Jim Chan Honeywell Aerospace UVM Michael Coleman The Boeing Company ALT/UVM Terry Curtland Ball Aerospace & Tech UVM Karyn Deming Goodrich (UTAS) VCH/UVM Peter Droste Airbus UVM Robert Faticanti Textron Systems UVM Aleck Featherston Jr. Bell Helicopter Textron UVM

Sylvia Franklin The Boeing Company ALT/UVM Laurent Geerts Sonaca UVM Alan Gilbert Cessna Aircraft Company UVM Greg Haataja Bell Helicopter ALT/UVM Gerald Harvey Triumph Group Inc. ALT/UVM John Koenig The Boeing Company UVM Bob Koukol Honeywell Aerospace ALT/UVM Serge Labbe Heroux Devtek Inc. UVM Nathalie Le Pottier Eurocopter UVM Susan Lewis Lockheed Martin Corp. UVM Mihaela Lupu SAFRAN ALT/UVM Nick Magnapera BAE Systems - Inc. ALT/UVM Veronique Marcel SAFRAN Group UVM

Angelina Mendoza Goodrich (UTAS) ALT/UVM Tom Moreland Bombardier Inc. UVM Raj Najarajan Gulfstream Aerospace UVM Iris Niu Goodrich (UTAS) ALT/UVM Chad Odell Hill Air Force Base UVM Jim O’Shea GE Aviation ALT/UVM Eric T. Oswald Raytheon Co. ALT/UVM Garry Pickett Pratt & Whitney UVM Muralikrishnan Ramalingam GE Aviation UVM Chris Reilly Hamilton Sundstrand UVM Josefa Rodriguez EADS-MTAD UVM Corazon Santos The Boeing Company ALT/UVM Jerry Satchwell Rolls-Royce CHR/UVM (Chair – February 2010)

Richard Shain Hawker Beechcraft UVM Paul Slater Rockwell Collins UVM Stefania Sorrentino Alenia Aermacchi S.p.A UVM Steve Starr Honeywell Aerospace UVM Mike Stolze Northrop Grumman Corp. UVM Stacey Sullivan Cessna Aircraft Co. ALT/UVM Zia Usmani BAE Systems – Military & Air Information (MAI) UVM Shawn Vierthaler Spirit Aerosystems UVM Debbie Vogel Triumph Group ALT/UVM Gene Wallace Triumph Fabrications- Fort Worth ALT/UVM Grzegorz Wryk Goodrich (UTAS) ALT/UVM CHEMICAL PROCESSING continued on next page

20

CHEMICAL PROCESSING (CP) (Mike Graham +1 724 772 8646, graham@sae.org) (Bill Dumas +1 724 772 8673 billdumas@sae.org)

(Nigel Cook, +44 870 350 5011, nigel.cook@pri-europe.org.uk) (Robert Lizewski, +1 724 772 8681, lizewski@sae.org)

(William Calvert +1 724-772-8524, wcalvert@sae.org) (Robert Nixon +1 724-772-8596, rnixon@sae.org)

TASK GROUP VOTING MEMBERS CONTINUED

Supplier Voting Members Daniel Backus Har-Conn Chrome Co. SVM Phillip Bratton Hohman Plating SVM Lee Bruce Robert Stuart Ltd. SVM Larry Carlson X-R-I Testing SVM John Carpenter U.S. Chrome Corp. SVM Stephane Chaumeil Galion SVM Jorge Della Costa Chrome Plus International ALT/SVM Steve Crest Stabile Plating SVM Jim Cummings Metal Finishing Co. SVM Robert Custer AAA Plating & Inspection SVM Warren DeCuir Lisi Aerospace ALT/SVM Bob Denton B-D Industries ALT/SVM Jim Denton B-D Industries SVM

Rachel DeSimone American Tinning SVM William Ferris TechMetals SVM Sarah Fuqua Kearfott Corporation – Motion System Division SVM Ron Franklin ChemResearch Co. Inc. SVM Alex French Aerofin Labs Ltd ALT/SVM Paul French Aerofin Labs Ltd SVM Jonathan Hebben Ducommun Aerostructures SVM Eric Jacklin F.M. Callahan & Sons SVM David Jones Nex-Tech SVM Richard Kline X-R-I Testing SVM Keven Kudelka Westfield Electroplating SVM Jeff Logan Saporito Finishing ALT/SVM Julie Mahan Unison Engine Components - Terre Haute SVM

Rosa Martin Superior Plating SVM Ian McDonald Robert Stuart Ltd ALT/SVM David Michaud Fountain Plating Inc. SVM William Miller Hohman Plating & Mfg. Inc. SVM Simone Murphy-Fickenworth Chrome Plus International SVM Abdul Nathani Hi-Tech Metal Finishing ALT/SVM Mike Noettl Magnetic Inspection Laboratory SVM Jerker Nordh Volvo Aero SVM Patrick O’Leary Nu-Pro SVM Gregory Penny Embee Incorporated SVM Ken Pham Lisi Aerospace Torrance SVM Jim Ringer Tech Met SVM Cynthia Roth Team Industrial Services SVM

Guy Saenz Hi-Tech Metal Finishing SVM Tammi Schubert LMI Finishing Inc SVM David Serbousek Olympic Scientific SVM Steve Simacek Hytek Finishes SVM Scott Singer Imagineering Enterprises Inc. SVM Greg Smotherman Jr. Ozark Mountain Technologies SVM Vittorio Stana Avcorp Industries Inc. SVM Steve Stone Saporito Finishing SVM Yoshiomi Sukesada Asahi Kinzoku Kogyo Co. Ltd. SVM Jim Tuminello Tech Met ALT/SVM

21

COATINGS (CT) (Jim Lewis +1 724 772 8688, jiml@sae.org)

(Robert Lizewski, +1 724 772 8681, lizewski@sae.org) The Coatings Task Group is conducting audits to demonstrate compliance to the PRI AC7109 series of standards. These documents contain the Nadcap requirements for the following: • Thermal Spray • Vapor Deposited Coatings • Diffusion Coating Processes • Stripping of Coating Materials

• Coating Evaluation • Plating of Coated Parts • Heat Treating of Coated Parts

TASK GROUP VOTING MEMBERS

Subscriber Voting Members Nicolas Barthelemy Eurocopter UVM Fabrice Crabos SAFRAN Group (Turbomeca) UVM Ben Evans Goodrich (UTAS) UVM Jon Higgins Rolls-Royce UVM

Erkan Kilic GE Aviation ALT/UVM Dan Loveless Parker Aerospace UVM John Nerz GE Aviation UVM Clark Okawa Pratt & Whitney UVM

Tim Pruitt Rolls-Royce CHR/UVM (Chair – July 2011) +1 317 230 3728 Jack Saunders Honeywell Aerospace UVM Jan Wigren Volvo Aero Corporation VCH/UVM Deborah Vogel Triumph Aerostructures – VAD UVM

Supplier Voting Members Brent Bartlett Sulzer Metco Canada Inc. SVM Dale Harmon Cincinnati Thermal Spray SEC/SVM

Anil Joshi Praxair Surface Technologies SVM John Passmore St. Louis Metallizing SVM

Ronald Stewart Ellison Surface Technologies SVM Vern Talmadge Howmet Casting - Thermatech Coatings SVM

22

COMPOSITES (COMP) (Rebekah Braun +1 724 772 7116, rbraun@sae.org) (Roger Stirling +1 724 772 7148, rstirling@sae.org)

The Composites Task Group is conducting audits to demonstrate compliance to the PRI AC7118. These audits address the Nadcap requirements for the following processes: • CMP – Compression Molding • CP – Core Processing • LRP – Liquid Resin Processing

• MB – Metal Bonding • PAR – Prepeg/Adhesive Bonding/Resin Film

Infusion TASK GROUP VOTING MEMBERS

Subscriber Voting Members Monica Alcala Honeywell Aerospace UVM Peter Atwell AIRBUS S.A.S UVM Michael Bemis Goodrich (UTAS) UVM Laura Benedetti SAFRAN Group ALT/UVM Tara Campbell Rolls Royce UVM Elmer Cardwell General Dynamics Armanent & Technical Products UVM Claude Chevalier SAFRAN Group ALT/UVM Jeremy Phillips Cessna Aircraft Co. UVM David Constable AIRBUS S.A.S ALT/UVM Marty Couey Hawker Beechcraft Corp. UVM Lucia Cutillo Alenia Aermacchi S.p.A UVM

Laurent DeJaie Sonaca ALT/UVM Kevin Dowling Spirit AeroSystems CHR/UVM (Chair – July 2010) Joe Dwyer Rolls-Royce ALT/UVM Achim Enzmann Eurocopter UVM Marcel Francois SAFRAN Group UVM Olivier Goupillon Eurocopter ALT/UVM Steve Grunshaw BAE Systems – Military & Air Information (MAI) ALT/UVM Sara Gunnarsson Volvo Aero UVM Richard Hammond The Boeing Company ALT/UVM Brett Hemingway BAE Systems – Military & Air Information (MAI) UVM

Mark Jackson Triumph Group, Inc. UVM Mike Kahler Ball Aerospace & Technologies UVM John Key Jr. Bell Helicopter VCH/UVM Betty Kocsis Honeywell Aerospace ALT/UVM Eric LeFort Sonaca UVM Frank Lennert The Boeing Company ALT/UVM Lance Loeks The Boeing Company UVM William Macias Goodrich (UTAS) ALT/UVM Leah Markowitz Honeywell Aerospace ALT/UVM Andreas Mastorakis GE Aviation UVM Angelina Mendoza Goodrich (UTAS) SEC/ALT/UVM

Rick Ouellette The Boeing Company ALT/UVM Keith Panuska Lockheed Martin UVM Alberto Portal EADS-CASA MTAD UVM Sally Spindor Triumph Group Inc. ALT/UVM Kenneth Sposato Triumph Aerostructures – VAD ALT/UVM Anne Stanley Bombardier, Inc. UVM Frank Thomas Bombardier, Inc. ALT/UVM Justin Walker Spirit AeroSystems ALT/UVM Composites continued on next page

23

COMPOSITES (COMP) (Rebekah Braun +1 724 772 7116, rbraun@sae.org) (Roger Stirling +1 724 772 7148, rstirling@sae.org)

TASK GROUP VOTING MEMBERS CONTINUED

Supplier Voting Members Nicolas Aimar Primus International SVM Kevin Brennan Swift Engineering, Inc. SVM Jim Brown Hexcel SVM Pierangelo Campagna EXOVA SVM Patrick Durkin TE Wire Liaison Richard Edge Cobham Composites SVM

Ben Flores AASC ALT/SVM Mike Guthmiller Applied Aerospace Structures SVM Rick Heise Swift Engineering, Inc. ALT/SVM Tommie Lakes GKN Aerospace SVM John Riddell St. Bernard Composites Ltd. ALT/SVM Vivian Salzarulo Kaman Aerospace Corporation SVM

David Scott Hitco Carbon Composites SVM Kevin Snyder Composite Horizons SVM Vitorio Stana Avcorp SVM Arno Toelkes Euro-Composites SVM Marc Trepanier Composite Atlantic Limited SVM

24

CONVENTIONAL MACHINING AS A SPECIAL PROCESS (CMSP)

(Andy Statham +44 133 286 9276, andy.statham@pri-europe.org.uk) The Conventional Machining as a Special Process (CMSP) Task Group is conducting audits to demonstrate compliance to the AC7126 series of checklists for conventional machining as a special process. These audits address the following types of processes:

• Holemaking • Turning • Grinding

• Broaching • Milling • Edge Treatment

TASK GROUP VOTING MEMBERS Subscriber Voting Members Ken Abram Honeywell Aerospace CHR/UVM (Chair – October 2011) Ertem Aygin GE Aviation ALT/UVM Nicolas Batista SAFRAN Group VCH/UVM Zeljko Calija Goodrich (UTAS) UVM Marco Cherubini Avio UVM

Philippe Durand Eurocopter UVM Vincent Dutilh SAFRAN Group ALT/UVM Mark Gleason GE Aviation ALT/UVM Wayne Hillstead 309th Maintenance Wing-Hill AFB UVM Scott Maitland Goodrich (UTAS) ALT/UVM

John Pfeiffer GE Aviation UVM Alex Pohoata Honeywell Aerospace ALT/UVM Tim Sowa Rolls-Royce UVM Caroline Des Landes Bombardier Inc. UVM

Supplier Voting Members Tim Crowe Dearborn Precision SVM

Brad Gould Dearborn Precision ALT/SVM

James Jensen Moeller Manufacturing Co SVM

25

ELASTOMER SEALS (SEALS) (Keith Purnell +1 724 772 8685, kpurnell@sae.org)

The Elastomer Seals Task Group is conducting product audits to demonstrate compliance to AC7115.

TASK GROUP VOTING MEMBERS Subscriber Voting Members Michelle Brunet The Boeing Company ALT/UVM Brent Clothier Cessna Aircraft Company UVM Kent DeFranco Lockheed Martin Corporation UVM Perry Freeman The Boeing Company UVM Marc Gage Hamilton Sundstrand UVM David Grulke Hamilton Sundstrand ALT/UVM

Jeffrey Kingsley Air Force UVM/GVT Manuel Koucouthakis Honeywell Aerospace CHR/UVM (Chair – October 2005) Susan Redward Honeywell Aerospace ALT/UVM Benjamin Shaw Rolls-Royce VCH/UVM Bob Teegarden Honeywell Aerospace ALT/UVM Estrella Watson Goodrich (UTAS) UVM

Supplier Voting Members Peter Holden Precision Polymer Engineering Ltd. SVM

John Hudspeth International Seal SVM

Dorothy Kern Parker Hannifin SVM

26

ELECTRONICS (ETG) (Bill Dumas +1 724 772 8673, billdumas@sae.org)

The Electronics Task Group is conducting electronics audits to demonstrate compliance to AC7119 Printed Boards, AC7120 Circuit Card Assemblies, and AC7121 Cable and Harness Assemblies.

TASK GROUP VOTING MEMBERS

Subscriber Voting Members William Cardinal Hamilton Sundstrand UVM Roy Garside Rolls-Royce UVM Eric Lacourt Thales UVM Philippe Larivee Thales ALT/UVM Nathalie LeFevre SAFRAN Group UVM

Nathalie LeTran Airbus – France ALT/UVM John Mastorides Honeywell Aerospace ALT/UVM/SEC Scott Meyer UTC Aerospace Systems UVM/CHR Philippe Pons Airbus – France UVM Norberto Roiz-Lafuente EADS CASA UVM

Richard Rowe Honeywell Aerospace UVM Richard Rumas Honeywell Aerospace UVM/VCH Suzanne Steketee Ball Aerospace & Technologies UVM Barbara Waller Raytheon Co UVM Gary Winters Northrop Grumman Corp UVM

Supplier Voting Members Cristiano Bazzi Somacis SpA SVM Paul Comer Graphic Plc SVM Stephan Gehrke Meggitt SA SVM Ian Hopps Ultra Electronics SVM

Donna Lopez Cristek Interconnects, Inc SVM Ishwar Mathur IEC Electronics Corp. SVM Jeremy Needs Ultra Electronics ALT/SVM Denise Ryves STS Defense Limited SVM

Douglas Schueller AbelConn LLC SVM Jennifer Wagner Ducommun LaBarge Tech SVM

27

FLUID DISTRIBUTION SYSTEMS (FLU) (Keith Purnell +1 724 772 8685, kpurnell@sae.org)

The Fluid Distribution Standards Task Group is conducting product audits to demonstrate compliance to AC7112, AC7112/1, AC7112/2, AC7112/3, AC7112/4, AC7112/6 and AC7123. These audits address the following: • Hose Manufacturing • Fittings & Other Machined Components • Couplings

• Hose Assembly • Value Added Hose Assembly Distributors • Titanium Tubing Manufacturers

TASK GROUP VOTING MEMBERS

Subscriber Voting Members Joe Bebey The Boeing Company ALT/UVM Samuel Buri The Boeing Company VCH/UVM Terence Chin NAVAIR UVM/GVT Mike King Northrop Grumman – SSSD Aerospace Systems UVM

Erwin Oman Bombardier UVM Mark Paul Rolls-Royce UVM Robert Schreiber The Boeing Company CHR/UVM (Chair – September 2008) +1 610 591 7660

Mark Scott The Boeing Company UVM Dan Smith GE Aviation UVM

Supplier Voting Members Roger Christianson Hydraflow Inc. SVM Mark Scatoloni Faber Enterprises Inc SVM

Michael Schleckman Voss Industries SVM Phillip Wade Smiths Tubular Systems - Laconia SVM

28

HEAT TREATING (HT) (Jerry Aston +44 870 350 5011, jerry.aston@pri-europe.org.uk)

(Marcel Cuperman +1 724 772 8678, cuperman@sae.org) (Rob Hoeth +1 724 772 8657, rhoeth@sae.org)

(Stan Revers +1 724 772 7157, srevers@sae.org)

The Heat Treating Task Group has developed AC7102 requirements and checklists that include the following: • Metal Systems – Carbon & Alloy Steels, Stainless Steel, pH Stainless Steels, Cast Iron, Aluminum Alloys, Titanium

Alloys, Heat Resisting Alloys, Magnesium, Other Nonferrous Metals • Heat Treating Process – Normalizing, Annealing, Hardening and Tempering, Solution Heat Treating, Aging,

Carburizing, Nitriding, Stress Relieving, Vacuum Brazing, Induction Hardening • Heat Treating Equipment – Furnace, Pyrometry, Instrumentation, Atmospheric Control System • Brazing

TASK GROUP VOTING MEMBERS Subscriber Voting Members Silvia Baeza Triumph Group, Inc. ALT/UVM Shaun Brewin Rolls-Royce Corp ALT/UVM Bruce Brownfield Lockheed Martin Corp. SEC/UVM Frank Brungs MTU Aero Engines GmbH UVM Giuseppe Campanile Alenia Aermacchi S.p.A UVM Craig Clasper General Dynamics Corp UVM Michael Corsino Hamilton Sundstrand UVM David Damasauskas Spirit AeroSystems Inc UVM Bernd Daniels MTU Aero Engines GmbH ALT/UVM Martin Day Honeywell Aerospace UVM Peter Edwards Airbus ALT/UVM Andreas Elbs Liebherr-Aerospace SAS UVM

Mark Emerson Rolls-Royce Corp UVM Robert Faticanti Textron Systems UVM Laurent Geerts SONACA UVM Christina Gonzalez-Perez EADS CASA UVM Peter Hammarbo Volvo Aero Corp UVM Gerald Harvey Triumph Group, Inc. UVM Wayne Hillstead 309th Maintenance Wing-Hill AFB ALT/UVM Andrew Hopkins BAE Systems (MAI) UVM Billy Hulse Spirit AeroSystems Inc ALT/UVM David Isenberg Parker Aerospace Group UVM Kent Johnson 309th Maintenance Wing-Hill AFB ALT/UVM

Jeff Koss The Boeing Company ALT/UVM Serge Labbe Heroux Devtek Inc. ALT/UVM Marc-Andre Lefebvre Heroux Devtek Inc. UVM William Macias Goodrich (UTAS) ALT/UVM Doug Matson The Boeing Company UVM Thomas Norris Goodrich (UTAS) UVM Eddy Pham Northrop Grumman Corporation UVM Sunder Rajan Raytheon Co UVM Chris Reilly Hamilton Sundstrand ALT/UVM Alex Richez Airbus UVM Simon Scott BAE Systems (MAI) ALT/UVM Mike Shen Honeywell Aerospace ALT/UVM

Gary Sigmon 309th Maintenance Wing-Hill AFB UVM David Soong Pratt & Whitney UVM William Stewart Bombardier Inc. UVM Marc Taillandier Eurocopter UVM Jeff Thyssen GE Aviation UVM Louis Tremblay Bombardier Inc. ALT/UVM Cyril Vernault SAFRAN Group VCH/UVM Tom Wilson Bombardier Inc. ALT/UVM Tomasz Wojtasik Honeywell Aerospace ALT/UVM HEAT TREATING continued on next page

29

HEAT TREATING (HT)

(Jerry Aston +44 870 350 5011, jerry.aston@pri-europe.org.uk) (Marcel Cuperman +1 724 772 8678, cuperman@sae.org)

(Rob Hoeth +1 724 772 8657, rhoeth@sae.org) (Stan Revers +1 724 772 7157, srevers@sae.org)

TASK GROUP VOTING MEMBERS CONTINUED

Supplier Voting Members Griff Braddock Braddock Metallurgical Inc SVM Michael Brandt Alcoa Inc. SVM Mark Brown Kaman Aerospace Corp SVM James Hill Carpenter Technology Corp. SVM

Alexander Klyuch Blades Technology Ltd SVM John Kunkle Alcoa Inc. SVM Bob Lehnen Bodycote Thermal Processing SVM Johanna Lisa Valley Metal Treating SVM

Vincent Musa Technetics Group Columbia SVM Michael Niedzinski Constellium France SVM Daniel Reeves Consolidated Foundries Inc SVM Stuart Sherman Metallurgical Processing Inc. SVM

30

MATERIALS TESTING LABORATORIES (MTL) (Jim Lewis +1 724 772 8688, jiml@sae.org)

(Kevin Wetzel, +1 724 772 8652, kwetzel@sae.org) (Rob Hoeth +1 724 772 8657, rhoeth@sae.org)

(Robert Lizewski, +1 724 772 8681, lizewski@sae.org)

This task group has published the checklists (AC7101, AC7101/1-9, AC7101/11, & AC7006) for Materials Testing Laboratories. Types of activities being accredited: • ISO/IEC 17025 Requirements • Chemical Testing • Mechanical Testing

• Metallography (Micro & Macro) • Hardness • Corrosion

• Microhardness • DTA • Test Specimen Preparation

TASK GROUP VOTING MEMBERS

Subscriber Voting Members Muriel Auzanne Airbus VCH/UVM Dietmar Becher Liebherr Aerospace UVM Eric Billings 309th Maintenance Wing-Hill AFB UVM Pietro Bonarrigo Bombardier Inc. UVM Thomas Brendel MTU Aero Engines GmbH ALT/UVM Linda Cook Rolls-Royce UVM George Coste SAFRAN Group ALT/UVM Bill Davis GE Aviation ALT/UVM Doug Deaton GE Aviation UVM Uta Dietrich AIRBUS S.A.S. France ALT/UVM George Doviak Goodrich (UTAS) UVM

Kevin Elston Spirit AeroSystems ALT/UVM Colin Fletcher Bell Helicopter Textron UVM Jose Gilson SAFRAN Group UVM John Haddock BAE Systems Military Air & Information [MAI] UVM Jim Hartman Honeywell Aerospace ALT/UVM Keith Kastner Cessna Aircraft Company ALT/UVM John Knie The Boeing Company ALT/UVM Frank Lennert The Boeing Company UVM Domenico Manna Alenia Aermacchi S.p.A. UVM Patricia Matkowski The Boeing Company ALT/UVM Olivier Molinas Eurocopter UVM

Tim Myers Honeywell Aerospace CHR/UVM (Chair – October 2011) +1 602 231 5407 Jeremy Phillips Cessna Aircraft Company UVM Amanda Rickman Raytheon Co. SEC/UVM Lindsay Schurle Spirit Aerosystems UVM Christian Schwaminger MTU Aero Engines GmbH UVM Armen Talverdian The Boeing Company ALT/UVM Neil Tinsley UTC/Pratt & Whitney UVM Verl Wisehart Rolls-Royce ALT/UVM MATERIALS TESTING LABORATORIES continued on next page

31

MATERIALS TESTING LABORATORIES (MTL) (Jim Lewis +1 724 772 8688, jiml@sae.org)

(Kevin Wetzel, +1 724 772 8652, kwetzel@sae.org) (Rob Hoeth +1 724 772 8657, rhoeth@sae.org)

(Robert Lizewski, +1 724 772 8681, lizewski@sae.org)

TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Frank Anderson The M&P Lab Inc. SVM Corwyn Berger Exova, Inc. SVM Mary Lee Bogensperger PCC Airfoils LLC SVM Wayne Brege Cannon Muskegon SVM Philip Bretz Metcut Research Associates, Inc. SVM Andrew Cantrell Jorgensen Forge Corp. SVM Matthew Chamberlain-Webber Timet UK Limited SVM John Chir Latrobe Specialty Steel SVM Deena Crossmore IMR Test Labs SVM Eric E. Dirats Dirats Laboratories SVM Bryan Engel Esco Turbine Technologies SVM

Kay Fisher Bohler Edelstahl GmnH & Co KG SVM Deborah Frick Sherry Laboratories LLC SVM Stephan Greimers Thyssen Krupp VDM GmbH SVM Brian Griffin Howmet Research Corp. SVM Bryan Hall NSL Analytical Services Inc. SVM Anil Joshi Praxair Surface Technologies SVM John Low Universal Stainless & Alloy Products SVM David Luoni Element Newtown SVM Amy Neugebauer Mar-Test Co. SVM Jacob Padrul Constellium France SVM Frank Peszka Laboratory Testing Inc. SVM Annette O’Connell Haynes International Inc. SVM

Len Radys Atlas Testing Laboratories SVM Pierre-Emmanuel Richy Aubert & Duval SVM James D. Rossi Westmoreland Testing SVM Ray Schiltz AADFW SVM Byron Skillings ATI Ladish Forging SVM T. Rao Tipirneni Long Island Testing Labs. Inc. SVM Kevin VonScio Perryman Company SVM Margaret Willis ATI Allvac Monroe SVM Jason Wright Metals Technology, Inc. SVM

32

NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT (NMSE)

(Rick Sovich +1 724 772 8689, rsovich@sae.org) The Nonconventional Machining and Surface Enhancement (NMSE) Task Group is conducting audits to demonstrate compliance to the AC7116 series of checklists for nonconventional machining and the AC7117 checklist for surface enhancement. These audits address the following types of processes: Nonconventional Machining • Electrochemical Machining • Electrochemical Grinding

• Electrical Discharge Machining – Fast Hole, Sinker, Wire, EC Drilling

• Laser Beam Machining – Cutting, Drilling

TASK GROUP VOTING MEMBERS Nonconventional Machining Sub-Task Group

Subscriber Voting Members Ken Abram Honeywell Aerospace ALT/UVM Zeljko Calija Goodrich (UTAS) UVM Tara Campbell Rolls Royce plc ALT/UVM Harold Finch Spirit AeroSystems, Inc. ALT/UVM Mark Gleason GE Aviation UVM Christina Gonzalez Perez EADS-CASA UVM

Aaron Havlovic Cessna UVM David McCallister UTC/Pratt & Whitney SEC/UVM Gudrun Muehlbauer MTU Aero Engines GmbH UVM John Pfeiffer GE Aviation ALT/UVM Alex Pohoata Honeywell Aerospace VCH/UVM Holger Polanetzki MTU Aero Engines GmbH ALT/UVM

Greg Syvertson Bell Helicopter Textron UVM Angelie Vincent Spirit AeroSystems, Inc. CHR/UVM Paul Woolley Rolls-Royce UVM Evren Yuksekkaya GE Aviation ALT/UVM Parmjit Khera GE Aviation ALT/UVM Serge Labbe Heroux Devtek UVM

Supplier Voting Members Tim Scarlett Danville Metal Stamping Co., Inc. SVM

Mark Singer Kessington Machine SVM Mike Nosek Micro-Tronics Inc. SVM

NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT continued on next page

33

NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT (NMSE)

(Rick Sovich +1 724 772 8689, rsovich@sae.org)

TASK GROUP VOTING MEMBERS CONTINUED Surface Enhancement Sub-Task Group

Surface Enhancement • Automated Peening • Computer Controlled Peening • Flapper Peening

• Manual Peening • Peen Forming

Subscriber Voting Members Ken Abram Honeywell Aerospace ALT/UVM Silvia Baeza Triumph Group Inc. UVM Daniel Becker UTC/Sikorsky Aircraft ALT/UVM Marc Belanger Bombardier Inc. UVM Zeljko Calija Goodrich (UTAS) UVM Tara Campbell Rolls Royce Plc ALT/UVM Peter Edwards Airbus ALT/UVM Harold Finch Spirit AeroSystems, Inc. ALT/UVM

Bill Fitzgerald Northrop Grumman Corp. UVM Mark Gleason GE Aviation ALT/UVM Christina Gonzalez Perez EADS-CASA UVM Paul Graham Airbus UVM Aaron Havlovic Cessna UVM Glen Heide The Boeing Company ALT/UVM Serge Labbe Heroux Devtek ALT/UVM

David McCallister UTC/Pratt & Whitney SEC/UVM Gudrun Muehlbauer MTU Aero Engines GmbH UVM Evren Yuksekkaya GE Aviation ALT/UVM John Pfeiffer GE Aviation UVM Jeremy Phillips Cessna Aircraft Co. ALT/UVM Alex Pohoata Honeywell Aerospace VCH/UVM Holger Polanetzki MTU Aero Engines GmbH ALT/UVM

K. T. Quader The Boeing Company UVM Greg Syvertson Bell Helicopter Textron UVM Angelie Vincent Spirit AeroSystems, Inc. CHR/UVM Paul Woolley Rolls-Royce UVM Parmjit Khera GE Aviation UVM

Supplier Voting Members Steve ConnallyE/M Coating Services ALT/SVM Dave Jones NEX-TECH Processing SVM

Dawn Stokes PTI Industries Inc. SVM Yoshiomi Sukesada Asahi Kinzoku SVM

Jay McMurray Metal Improvement Co. SVM

34

NONDESTRUCTIVE TESTING (NDT) (Mark Aubele, +1 724 772. 8654, maubele@sae.org) (Jim Bennett, +1 724 772 8651, jbennett@sae.org)

(Phil Ford, +44 870 350 5011, phil.ford@pri-europe.org.uk) (Mike Gutridge, +1 740 587 9841, mikeg@sae.org)

(Andy Statham +44 133 286 9276, andy.statham@pri-europe.org.uk) The Nondestructive Testing Task Group is currently reviewing audit reports and making recommendations to Nadcap Council on accreditation for the following tests: • Magnetic Particle • Liquid Penetrant • Ultrasonic

• Radiography • Eddy Current

TASK GROUP VOTING MEMBERS Subscriber Voting Members Charles Alvarez UTC Aerospace SystemsALT/UVM Steve Bauer Northrop Grumman Corp. UVM Philippe Beck Eurocopter UVM Mitch Birzer General Dynamics Corp UVM Alain Bouchet SAFRAN Group UVM Juergen Burchards MTU Aero Engines GmbH UVM Fangmei Chu Honeywell Aerospace ALT/UVM Mike Clark Sikorksky Aircraft UVM Massimo Colombo Avio UVM Richard Costantino UTC Aerospace SystemsUVM Michael Daehling Cessna Aircraft Company ALT/UVM Timothy Doane 309th Maintenance Wing – Hill AFB UVM Chris Dootson BAE Systems – Military & Air Information (MAI) UVM

Roger Eckart Hamilton Sundstrand /IL ALT/UVM Jim Fowler Pratt & Whitney ALT/UVM Steven Garner Eaton Aerospace UVM Luis Grijalva Lockheed Martin Corporation UVM Thomas Mike Guinn Bell Helicopter Textron UVM Greg Hall Cessna Aircraft Company UVM Robert Hogan Honeywell Aerospace - Phoenix UVM Ed Hohman Bell Helicopter Textron UVM Scott Iby Hamilton Sundstrand ALT/UVM Phil Keown GE Aviation CHR/UVM (Chair – April 1996) +1 781 594 2856 Serge Labbe Heroux Devtek Inc ALT/UVM Donald MacLean Raytheon Co UVM

Luigi Merletti AgustaWestland UVM Michael Mitchell Hamilton Sundstrand UVM Dale Norwood Parker Aerospace Group UVM Gary O’Neill Parker Aerospace Group ALT/UVM Robert Rainone UTC Aerospace SystemsALT/UVM Robert Reynolds The Boeing Company - BDS ALT/UVM David N. Royce Pratt & Whitney SEC/UVM Victor Schonberger Israel Aerospace Industries ALT/UVM Bobby Scott Bombardier, Inc. UVM/VCH Uri Sol Israel Aerospace Industries UVM Andrea Steen Rolls-Royce ALT/UVM Christopher Stevenson Rolls-Royce UVM Terho Sulkupuro Volvo Aero Corp UVM

D. Scott Sullivan Honeywell Aerospace – Tempe UVM Phoenix ALT/UVM Pat Thompson Honeywell Aerospace – Torrance UVM Phoenix ALT/UVM Dominique Tomasso SAFRAN Group ALT/UVM Walter Tonizzo Heroux Devtek Inc UVM Peter Torelli The Boeing Company UVM Louis Truckley The Boeing Company ALT/UVM David H. Vaughn Spirit AeroSystems Inc UVM Tony Warren Airbus S.A.S – UK UVM Frank Whittaker Spirit AeroSystems Inc ALT/UVM Sean Wood Triumph Group UVM NONDESTRUCTIVE TESTING continued on next page

35

NONDESTRUCTIVE TESTING (NDT) (Mark Aubele, +1 724 772 8654, maubele@sae.org) (Jim Bennett, +1 724 772 8651, jbennett@sae.org)

(Phil Ford, +44 870 350 5011, phil.ford@pri-europe.org.uk) (Mike Gutridge, +1 740 587 9841, mikeg@sae.org)

(Andy Statham +44 133 286 9276, andy.statham@pri-europe.org.uk)

TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Christopher Andersen PCC Structurals Inc. LPC SVM Mike Ashton Hexcel Kent SVM Andy Bakewell E. M. Inspection Co Ltd SVM Mario Bianchi BYTEST SRL SVM Martyn Bills Exova (UK) Limited ALT/SVM N. David Campbell West Penn Testing Group SVM Massimo Capriolo BYTEST SRL ALT/SVM Claude Chambon Aubert & Duval SVM Dwayne Cooper RTI International Metals Inc SVM Robert Custer AAA Plating & Inspection, Inc. SVM

Paul Evans James Fisher IMS Ltd. SVM William Evridge X-R-I Testing ALT/SVM Richard Gasset LISI Aerospace - Torrance SVM David Gray Mitchell Laboratories Inc SVM Robert Henchar X-R-I Testing SVM Richard King New Hampshire Ball Bearings Inc. SVM Mike Kocka Arrow Gear Company SVM Josef Maier Bohler Edelstahl GmbH & Co KG SVM D.E. “Skip” McDougall Hitco Carbon Composites Inc. SVM (cont.)

William McKessy Alcoa Howmet SVM David Mitchell Composite Inspection Solutions SVM Patrick O’Leary Nu-Pro Limited SVM Mark Pompe West Penn Testing Group ALT/SVM Jonathan Pugh Exova (UK) Limited SVM Cindy Roth TEAM Industrial Services TCM Division-Cincinnati SVM Guy Saenz Hi-Tech Metal Finishing SVM Gary White Orbit Industries Inc SVM Rob Yocum Imagineering Finishing Tech SVM

36

NON METALLIC MATERIALS MANUFACTURING (NMMM) (Rebekah Braun +1 724 772 7116, rbraun@sae.org)

The Non Metallic Materials Manufacturing Task Group is conducting audits to demonstrate compliance to the PRI AC7124. These audits address the Nadcap requirements for the following processes:

• Resin Manufacturing • Prepeg Manufacturing • Adhesive Manufacturing

TASK GROUP VOTING MEMBERS Subscriber Voting Members Monica Alcala Honeywell Aerospace ALT/UVM Peter Atwell AIRBUS S.A.S. UVM Muriel Auzanne AIRBUS S.A.S. ALT/UVM Michael Bemis Goodrich (UTAS) UVM Laura Benedetti SAFRAN Group ALT/UVM Tara Campbell Rolls- Royce UVM Claude Chevalier SAFRAN Group UVM Jeremy Phillips Cessna Aircraft Co. UVM David Constable AIRBUS S.A.S. ALT/UVM

Marty Couey Hawker Beechcraft Corp. UVM Kevin Dowling Spirit AeroSystems CHR/UVM (Chair – July 2010) Joe Dwyer Rolls-Royce ALT/UVM Achim Enzmann Eurocopter UVM Marcel Francois SAFRAN Group ALT/UVM Olivier Goupillon Eurocopter ALT/UVM Steve Grunshaw BAE Systems-Military Air Solutions ALT/UVM Brett Hemingway BAE Systems-Military & Air Information (MAI) UVM

Mark Jackson Triumph Group Inc. UVM Mike Kahler Ball Aerospace & Tachnologies UVM John Key Jr. Bell Helicopter VCH/UVM Betty Kocsis Honeywell Aerospace UVM Frank Lennert The Boeing Company ALT/UVM Lance Loeks The Boeing Company UVM Leah Markowitz Honeywell Aerospace ALT/UVM Andreas Mastorakis GE Aviation UVM

Keith Panuska Lockheed Martin SEC/UVM Alberto Portal EADS-CASA MTAD UVM Sally Spindor Triumph Group Inc. ALT/UVM Ken Sposato Triumph Aerostructures – VAD ALT/UVM Anne Stanley Bombardier, Inc. UVM Justin Walker Spirit AeroSystems ALT/UVM

Supplier Voting Members Jay Berndt Toray Composites ALT/SVM Jim Brown Hexcel SVM

Jim Ferrel Cytec Engineered Materials ALT/SVM Richard Perrett Advanced Composites Group Ltd SVM

Rick Price Park Electrochemical SVM Colleen Saunders Toray Composites SVM

Steve Schrameyer Cytec Engineered Materials SVM Arno Toekles Euro-Composites SVM

37

NON METALLIC MATERIALS TESTING (NMMT) (Rebekah Braun +1 724 772 7116, rbraun@sae.org)

The Non Metallic Materials Testing Task Group is conducting audits to demonstrate compliance to the PRI AC7122-I for Independent Testing Laboratories, PRI AC7122-P for Part Manufacturers Captive Laboratories and PRI AC7122-R for Raw Materials Manufacturers Captive Laboratories. These audits address the Nadcap requirements for the testing of Class A: Composites and Class B: Adhesive/Adhesive Primer

• Mechanical Testing • Physical Testing

• Chemical Testing • Thermal Testing

• Flammability Testing

TASK GROUP VOTING MEMBERS

Subscriber Voting Members Monica Alcala Honeywell Aerospace ALT/UVM Peter Atwell AIRBUS S.A.S. UVM Muriel Auzanne AIRBUS S.A.S. ALT/UVM Michael Bemis Goodrich (UTAS) UVM Laura Benedetti SAFRAN Group ALT/UVM Peter Bonarrigo Bombardier, Inc. ALT/UVM Tara Campbell Rolls- Royce UVM Claude Chevalier SAFRAN Group UVM

Jeremy Phillips Cessna Aircraft Company UVM David Constable AIRBUS S.A.S. ALT/UVM Marty Couey Hawker Beechcraft Corp. UVM Kevin Dowling Spirit AeroSystems CHR/UVM (Chair - July 2010) Joe Dwyer Rolls-Royce ALT/UVM Achim Enzmann Eurocopter UVM Marcel Francois SAFRAN Group ALT/UVM Olivier Goupillon Eurocopter ALT/UVM

Steve Grunshaw BAE Systems-Military & Air Solutions ALT/UVM Brett Hemingway BAE Systems-Military & Air Information (MAI) UVM Mark Jackson Triumph Group Inc. UVM Mike Kahler Ball Aerospace & Technologies UVM John Key Jr. Bell Helicopter VCH/UVM Betty Kocsis Honeywell Aerospace UVM Frank Lennert The Boeing Company ALT/UVM Lance Loeks The Boeing Company UVM

Leah Markowitz Honeywell Aerospace ALT/UVM Andreas Mastorakis GE Aviation UVM Keith Panuska Lockheed Martin SEC/UVM Alberto Portal EADS-CASA MTAD UVM Kenneth Sposato Triumph Aerostructures – VAD ALT/UVM Sally Spindor Triumph Group, Inc. ALT/UVM Anne Stanley Bombardier, Inc. UVM Justin Walker Spirit AeroSystems ALT/UVM

Supplier Voting Members Nicolas Aimar Primus International FCD SVM Frank Anderson The M&P Lab SVM Paul Braun Cincinnati Testing Labs SVM Jim Brown Hexcel SVM Pierangelo Campagna EXOVA SVM

Stephen Davies Hexcel ALT/SVM William DeLaurier IMR Test Labs SVM Jim Ferrel Cytec Engineered Materials ALT/SVM Dennis Kidd Cincinnati Testing Lab ALT/SVM Tommie Lakes GKN Aerospace SVM Brian McCrory Delsen Testing Labs ALT/SVM

John Moylan Delsen Testing Labs SVM Richard Perrett Advanced Composite Group SVM Rick Price Park Electrochemical SVM John Riddell Primus International FCD ALT/SVM Jim Rossi Westmoreland Testing SVM Don Russell Toray Composites ALT/SVM

Colleen Saunders Toray Composites SVM Steve Schrameyer Cytec Engineered Materials SVM Marc Trepanier Composite Atlantic Ltd. SVM Nicolas Vetel Critt-Materiaux MPC SVM

38

SEALANTS (SLT)

(Keith Purnell +1 724 772 8685, kpurnell@sae.org)

The Nadcap Sealants program consists of two types of audits: (1) Sealant Manufacturers: SAE Aerospace Standard AS7200/1 - on-site inspection of aerospace sealant manufacturers. (2) Value-Added Sealant Distributors: SAE Aerospace Standard AS7202. Testing and fabrication techniques included in the audit criteria: • Two-Part Polysulfide Sealants • Silicones and Fluorosilicones • Polyurethanes

• Adhesion Promoters • Coatings and Coating Processes • Peel Panels, Shear Specimens, Tensile Bars

TASK GROUP VOTING MEMBERS

Subscriber Voting Members Jerry Brown Lockheed Martin Corp. ALT/UVM Brent Clothier Cessna Aircraft Company UVM Kent DeFranco Lockheed Martin Corp. CHR/UVM (Chair – December 2011) Aleck Featherston Bell Helicopter Textron UVM

Jeffrey Kingsley Air Force SEC/UVM/GVT Diane Kleinschmidt NAVAIR UVM/GVT Manuel Koucouthakis Honeywell Aerodapce UVM Angelina Mendoza Goodrich (UTAS) ALT/UVM Raj Nagarajan General Dynamics Corp. UVM

Susan Redward Honeywell Aerospace ALT/UVM Clifford Smith General Services Administration UVM/GVT Estrella Watson Goodrich (UTAS) UVM

Supplier Voting Members Jim Carney National Sealants & Lubricants SVM Suzanna DeMoss 3M Company Aerospace and Aircraft Maintenance Department SVM Derek Hughes PPG Aerospace PRC DeSoto ALT/SVM

John Lane Integral Products Inc. SVM Philip Shackley PPG Aerospace/PRC DeSoto Intl. SVM Linda Smith Flamemaster Corporation SVM Jeff Steele D Aircraft Products Inc. SVM

Jonathan Zook 3M Company Aerospace and Aircraft Maintenance Department ALT/SVM

39

WELDING (WLD) (Ian Simpson +44 870 350 5011, ian.simpson@pri-europe.org.uk)

(Mike Gutridge +1 740 587 9841, mikeg@sae.org) (Stan Revers +1 724 772 7157, srevers@sae.org)

Process specific requirements have been developed by the Welding Task Group and are contained in the AC7110 series of checklists. Welding processes covered include: • Diffusion Welding • Electron Beam Welding • Flash Welding • Friction/Inertia Welding • Fusion Welding

• Laser Welding • Percussion Stud Welding • Resistance Welding • Torch/Induction Brazing

• Welder/Welding Operator Qualification

• Evaluation of Welds

TASK GROUP VOTING MEMBERS Subscriber Voting Members Carlos Alfaro Eaton Aerospace ALT/UVM Brandon Beasley Parker Aerospace Group ALT/UVM Gary Coleman The Boeing Company ALT/UVM Caroline DesLandes Bombardier Inc ALT/UVM Andrew Dewhurst BAE Systems Air & Information (MAI) ALT/UVM Chris English GE Aviation UVM Harold Finch Spirit AeroSystems Inc ALT/UVM Bob Fletcher BAE Systems Air & Information (MAI) UVM Larry Hamanishi The Boeing Company ALT/UVM

Milan Hanyk Honeywell Aerospace UVM Scott Iby Hamilton Sundstrand UVM Michael Irvin The Boeing Company UVM Jerry Isoaho Volvo Aero Corporation UVM Günther Jakobi Rolls-Royce ALT/UVM Hugh Jamison Bombardier inc ALT/UVM Keith Kastner Cessna Aircraft Company UVM Ralph Kropp MTU Aero Engines GmbH CHR/UVM (Chair – July 2008) +49 89 1489 4035 Holger Krueger Airbus UVM

Mario Leclerc Bombardier Inc. UVM Donald Lenhart Spirit AeroSystems Inc UVM Dag Lindland Pratt & Whitney UVM Nick Magnapera BAE Systems Inc. UVM Scott Maitland UTC Aerospace SystemsUVM Steve Michaud Parker Aerospace Group UVM Lyle Morris Raytheon Company UVM Rick Peterson Rockwell Collins Inc MBR Jeremy Phillips Cessna Aircraft Company ALT/UVM

Earl Pruett Lockheed Martin Corp UVM Brian Ricks Raytheon Company ALT/UVM Paul Slater Rockwell Collins Inc MBR Ken Sposato Triumph Group UVM David Struckman Eaton Aerospace UVM Steve Tooley Rolls-Royce VCH/UVM Angelie Vincent Spirit AeroSystems Inc ALT/UVM Gary Winters Northrop Grumman Corp UVM

Supplier Voting Members Randy Hite PCC Structurals Inc. LPC SVM Christopher Kielb Advance Welding SVM

Angelo Monzo Barnes Aerospace ALT/SVM David Osenar Pako Inc. ALT/SVM

Mike Schleckman Voss Industries Inc SVM Jackie Sternot PAKO, Inc. SVM

Gigi Streeter Barnes Aerospace SVM Guido Witting Heggemann AG SVM