cdn.p-r-i.org · Nadcap is an unprecedented cooperative industry effort to improve quality, while...

June 2014 Attendees' Guide

Dublin, Ireland

Performance Review Institute http://www.p-r-i.org

International Headquarters 161 Thorn Hill Road Warrendale, PA 15086 USA Phone: +1.724.772.1616 Fax: +1.724.772.1699 Email: [email protected]

European Office 1 York Street London W1U 6PA UK Phone: +44.870.350.5011 Fax: +44.870.350.5022 Email: [email protected]

Asia Office (China) PRI Asia Office (China) RM 307, Building No.1, China Aero-Polytechnology Establishment No. 7Jingshun Rd, Chaoyang District, Beijing 100 028, P.R.China Telephone: +86.10.6461.9807 Fax: +86.10.6467.3087 Email: [email protected]

Asia Office (Japan) Renak Bldg, 4th Floor, 1-4 Matsushin-cho Kasugai-shi, Aichi 486-0931 Japan Phone: +81.568.35.3520 Fax: +81.568.35.3397 Email: [email protected]

As of 21 May 2014 This does not represent the official roster or guidelines for Nadcap Meetings.

TABLE OF CONTENTS

Overview of PRI/Nadcap ....................................................................................................................... 2 Organizational Structure ........................................................................................................................ 3 Nadcap Subscribers .............................................................................................................................. 4 Future Nadcap Meetings ...................................................................................................................... 5 Task Groups (Operational) .................................................................................................................... 5 Getting the Most Out of Nadcap ............................................................................................................ 6 Antitrust Statement ................................................................................................................................ 7 Nadcap Personal Code of Ethics & Conflict of Interest .......................................................................... 7 Neutrality ............................................................................................................................................... 8 Export Control ....................................................................................................................................... 8 Membership Responsibilities ................................................................................................................. 8 Membership Categories ......................................................................................................................... 9 Membership & Task Group Officer Codes ........................................................................................... 10 Meeting Participation & Voting Procedures .......................................................................................... 11 Supplier Voting Member Policy ............................................................................................................ 11 PRI Board of Directors ...................................................................................................................... 12 Administrative Committees Nadcap Management Council......................................................................................................... 13-14 NUCAP Management Council ............................................................................................................. 15 Supplier Support Committee ................................................................................................................ 16 Task Groups Aerospace Quality Systems (AQS) ................................................................................................. 17-18 Chemical Processing (CP) ............................................................................................................. 19-20 Coatings (CT) ..................................................................................................................................... 21 Composites (COMP) ..................................................................................................................... 22-23 Conventional Machining as a Special Process (CMSP) ...................................................................... 24 Elastomer Seals (SEAL) ..................................................................................................................... 25 Electronics (ETG) ............................................................................................................................... 26 Fluid Distribution Systems (FLU) ........................................................................................................ 27 Heat Treating (HT) ......................................................................................................................... 28-29 Materials Testing Laboratories (MTL) ............................................................................................ 30-31 Measurement & Inspection (M&I) ........................................................................................................ 32 Nonconventional Machining and Surface Enhancement (NMSE) .................................................. 33-34 Nondestructive Testing (NDT) ....................................................................................................... 35-36 Non Metallic Materials Manufacturing (NMMM) .................................................................................. 37 Non Metallic Materials Testing (NMMT) .............................................................................................. 38 Sealants (SLT) ................................................................................................................................... 39 Welding (WLD) .................................................................................................................................... 40 General Global Staff E-Mail Addresses/Telephone Extensions .................................................................... 41-42 eAuditNet Training Sessions ............................................................................................................... 43 NCSI (Nadcap Customer Service Initiative) ......................................................................................... 44 Subscriber Orientation & Tutorial ......................................................................................................... 44 Supplier Orientation & Tutorial ............................................................................................................. 44 Supplier Support Committee Meeting .................................................................................................. 44

1

OVERVIEW PRI / Nadcap

Nadcap is an unprecedented cooperative industry effort to improve quality, while reducing costs, for quality assurance throughout the aerospace and defense industries. Nadcap is an industry-managed approach to conformity assessment that brings together technical experts from both industry and government in the Nadcap organization. Prime contractors, suppliers and representatives from the Government work together to establish requirements for accreditation, approve suppliers and define operational program requirements. Unlike traditional third-party programs, Nadcap is an industry managed program. This process results in a standardized approach to quality assurance and a reduction in redundant auditing throughout the aerospace industry because industry has joined forces to develop a program that: • Establishes stringent audit criteria and requirements to meet industry consensus

standards of all participants • Replaces routine auditing of suppliers with one approved through a consensus

decision-making process of members from the user community • Conducts more in-depth, technically superior special process audits • Improves supplier quality throughout industry through stringent requirements • Reduces costs through improved standardization • Utilizes technically expert auditors to assure process familiarity • Provides more frequent audits for primes, fewer audits for suppliers Beneficiaries of improvements resulting from Nadcap are as diverse as Nadcap's over 1,500 customers. A participating prime contractor reports a saving of over $1 million annually while achieving technically superior audits. An accredited Nadcap supplier has tracked a 97% reduction in rework resulting from improvements to their system stemming from Nadcap requirements.

Nadcap Facts

• Nadcap has over 2,800 accredited suppliers of special processes and products listed on the Nadcap Qualified Manufacturers List (QML)

• Nadcap has conducted over 40,000 audits with 5,000+ audits expected in 2014 • Subscribing prime contractor/government - 50

2

ORGANIZATIONAL STRUCTURE Nadcap MANAGEMENT COUNCIL

3

Nadcap SUBSCRIBING PRIME CONTRACTORS/ GOVERNMENT MEMBERS

• 309th Maintenance Wing-Hill AFB • AgustaWestland • Airbus Group

• Aerolia • Airbus • Airbus Defence and Space • Airbus Helicopters • Premium Aerotec GmbH

• Alenia Aermacchi S.p.A. • BAE Systems – Military Air &

Information (MAI) • BAE Systems • Ball Aerospace & Technology

Corporation • The Boeing Company • Bombardier Inc. • COMAC • Defense Contract Management

Agency (DCMA) • Eaton Aerospace • Embraer • GE Aviation

• GE Avio S.r.l. • GKN Aerospace • GKN Aerospace Sweden AB • General Dynamics

• Gulfstream Aerospace • Héroux Devtek Inc. (Landing Gear

Division)

• Honeywell Aerospace • Israel Aircraft Industries • Latecoere • Liebherr-Aerospace SAS • Lockheed Martin Corporation • MTU Aero Engines AG • Northrop Grumman Corporation • Parker Aerospace Group • Raytheon Company • Rockwell Collins, Inc. • Rolls-Royce • SAFRAN Group • Sonaca • Spirit AeroSystems • Textron Inc.

• Bell Helicopter • Beechcraft • Cessna Aircraft Company • Textron Systems

• Thales • Triumph Group Inc. • United Technologies Corporation

• Goodrich (UTAS) • Hamilton Sundstrand (UTAS) • Pratt & Whitney • Pratt & Whitney Canada • Sikorsky Aircraft

For updated information, please visit the PRI Website at www.p-r-i.org

4

http://www.p-r-i.org/

FUTURE Nadcap MEETINGS

October 20-24, 2014 Omni William Penn Hotel 530 William Penn Place Pittsburgh, PA 15219 USA Rate: $165 Single/Double Reservation information will be posted on the PRI Website when available.

March 2-6, 2015 Estrel Hotel & Convention Center Sonnenallee 225 12075 Berlin Germany Rate: €138 Single occupancy Reservation information will be posted on the PRI Website when available.

TASK GROUPS (OPERATIONAL)

Abbreviation Program Name AQS Aerospace Quality Systems CP Chemical Processing CT Coatings COMP Composites CMSP Conventional Machining as a Special Process SEALS Elastomer Seals ETG Electronics FLU Fluid Distribution Systems HT Heat Treating M&I Measurement & Inspection MTL Materials Testing Laboratories NDT Nondestructive Testing NMC Nadcap Management Council NMMM Non Metallic Materials Manufacturing NMMT Non Metallic Materials Testing NMSE Nonconventional Machining and Surface Enhancement SLT Sealants (Manufacturers & Distributors) WLD Welding

5

GETTING THE MOST OUT OF Nadcap The benefits received by member companies vary in direct proportion to their participation and flowdown into their own corporate structures. Nadcap is a tool that provides significant benefits when utilized properly. In order to maximize your benefits from Nadcap, the following tips will help:

For Subscriber Members

1. Clearly define your objectives, support and expectations for Nadcap. Share this information with your company's key personnel and Nadcap representatives. Ensure that management decisions (e.g., require or accept Nadcap accreditation and stop own auditing) are incorporated by organization.

2. Select personnel to represent your company to the task group who have demonstrated expertise in the task group area of responsibilities. Ensure all attendees have a basic understanding of the Nadcap process.

3. Ensure appropriate personnel in your company (sourcing & quality) are familiar with Nadcap's operation and the company's policies concerning Nadcap.

4. Address changes necessary in your current operations to provide for maximum implementation of Nadcap throughout your corporate structure.

For Supplier Members

1. Understand the objectives of Nadcap and participate in the improvement of the process. Attend Supplier events and meetings.

2. Utilize the many resources available on the PRI Website (www.p-r-i.org) and eAuditNet (www.eAuditNet.com). These resources are summarized in a document found at:

eAuditNet→Resources→Documents→Public Documents→Supplier Support Committee (SSC)→SSC Documents→Supplier Tools Spreadsheet

3. Take advantage of the Supplier Mentoring program which can pair you with an

experienced supplier to help you understand the common pitfalls in audits. 4. Perform a thorough and effective pre-audit well before your actual audit and

correct any deficiencies found. Document your objective evidence. 5. After your Nadcap audit move swiftly to identify root causes and implement

effective corrective actions in response to audit nonconformances. 6. Promote your success; notify your customers of your Nadcap accreditation.

6

ANTITRUST

Associations by nature involve communications or activities among members who are business competitors. Extreme care must be exercised to avoid policies, programs, dialogues, or pursuits, which could be seen as having an intention or result of restraint of trade. Conscientious antitrust compliance and fairness to participants demand that association meetings be conducted properly. Only legitimate subjects for association discussion should be undertaken. Chairpersons have been instructed that parliamentary rules and procedures should be followed at all meetings.

Nadcap Personal Code of Ethics and Conflict of Interest

All individuals (Subscribers, Suppliers, Staff, Auditors, etc.) involved with the Nadcap activity shall exhibit acceptable professional standards of conduct and uphold and advance the integrity of Nadcap. Each individual is expected to exercise impartial professional judgment to assure confidence in the integrity of Nadcap by avoiding conflicts of interest in all Nadcap related activities. When a competing interest has the potential to preclude or impair exercising one’s independent professional judgment or unreasonably jeopardize the integrity of the Nadcap activity, the individual should disassociate themselves from that particular activity. Any person associated with the Nadcap activity who believes that continued participation by any other person may jeopardize the integrity of Nadcap should bring the matter to the attention of the Nadcap Management Council. All Nadcap Staff, its Auditors, Nadcap Management Council and Task Group Members shall maintain proprietary or confidential information with which they become familiar as a result of their exposure to the supplier and/or reports during the accreditation process appropriately. Information of this type shall not be shared with individuals or organizations having no right to this information. All individuals associated with the Nadcap audit and review process shall avoid using undue influence or personal conversation to influence the audit results or the review process. Any known violations to the above policy may be reported to the ad hoc Nadcap Ethics Committee at [email protected].

7

mailto:[email protected]

NEUTRALITY

In keeping with the original spirit and purpose of the Nadcap program, all Nadcap meetings and related activities are to be conducted for the benefit of the aerospace industry as a whole. Activities sponsored by any individual Nadcap participant in conjunction with a Nadcap meeting or Nadcap-sponsored event, including but not limited to promotional events (hospitality suites, receptions, site tours, etc.) distribution of marketing materials, etc. are discouraged by Nadcap leadership and the Nadcap Management Council . To the extent that a supplier engages in such activities and those activities interfere with the objectives of the Nadcap program, the supplier may be asked to limit/modify/refrain from such activity.

EXPORT CONTROL The Nadcap process accounts for the need to control the exchange of information, data, etc. that is restricted under export control regulations. This includes information which is shared or presented during Nadcap meetings, conference calls, and in discussions between meeting attendees. All attendees must take precautions to ensure that no information or material which is restricted under any export control regulation is included in any presentation or discussion during Nadcap meetings. If you are unsure as to whether or not the data with which you’re working is restricted under the Export Administration Regulation (EAR), the International Traffic in Arms Regulation (ITAR), and/or any other international export control law(s), you are legally obligated to contact the organization with whom the data originated for clarification.

RECORDING POLICY Audio or video recording of Nadcap meetings is prohibited unless formal approval is received from all attendees and recorded in the minutes. Violators of this policy will be asked to stop recording. Failure to stop recording or repeated attempts to record may result in expulsion from the meeting and/or the Nadcap program.

MEMBERSHIP RESPONSIBILITIES

1. Subscriber members are expected to attend all Nadcap meetings. If the member is unable to

attend, an alternate may be designated. 2. Other Nadcap members should make arrangements to attend all meetings where policy,

procedures, audit criteria, etc., will be discussed. Non-subscriber members shall review agenda to determine if they should attend.

3. Reply to surveys, questionnaires, and ballots that are circulated to members. 4. Carry through sponsorship and coordination of individual projects as assigned. 1. Prepare checklists for auditing and continuing surveillance. 2. Review resumes and interview auditors. 3. Review audit reports. 4. Participate in oversight audits.

8

MEMBERSHIP CATEGORIES

Subscriber Prime Subscriber Prime members are those aerospace or defense contractor prime companies who are Nadcap Subscribers, and Design Approval holders or Design Authorities of Aviation, Defense, and/or Space products for end use products or significant systems or subsystems for such products. Companies qualifying as Subscribers supporting Commercial Aviation shall hold approvals such as Technical Standard Order (TSO), Type Certificate (TC), Supplemental Type Certificate (STC) or Design Organization Approval (DOA) from an applicable regulatory agency or have been delegated design authority for major aircraft sections such as the fuselage, wing, or empennage from companies holding such approvals. Companies qualifying as Subscribers supporting Defense or Space shall demonstrate Design Authority of active product which is recognized by the industry as end-use products or significant systems or subsystems (such as propulsion systems, brake systems, aero structure systems, or the equivalent). These Subscriber Members have the design authority to write their own special process specifications and have internal engineering organizations to provide technical directions and support. Subscriber organizations which are structured to provide networked resources within their corporation for design and special process technical directions and support may identify subsidiary organizations or joint ventures owned by only Subscribers as part of their Subscriber Agreement with associated rights and obligations provided such organizations either meet the Subscriber Prime criteria or provide special process services solely to their corporation or joint venture corporations and not to other customers.

Subscriber Government

Representative from government agencies. Has vote in all Nadcap activities.

Supplier Active supplier who is participating in developing and revising audit criteria. Has vote in task groups on non-accreditation matters.

Liaison/Specialist Individual who has specific technical knowledge for a particular task group.

Pending Subscriber Same as Subscriber. This grade is temporary to allow new Subscribers to participate.

Observer May attend Nadcap meetings. May attend audit reviews by invitation only.

9

MEMBERSHIP CODES UVM SUBSCRIBER VOTING MEMBER - An appointed participator

of the Nadcap system.

SVM SUPPLIER VOTING MEMBER - A supplier member voting on nonaccreditation matters within the Task Group.

ALT ALTERNATE VOTING MEMBER - A qualified individual designated by a Voting Member to act in their absence.

MBR MEMBER - Appointed individual who participates by attending meetings, answering questionnaires, and furnishing pertinent technical information and expertise. Member has no formal vote.

GVT A government representative. If voting member, will have "UVM" code.

LVM LIAISON VOTING MEMBER - A voting member representing a corporation other than an OEM (i.e., a society or association).

TASK GROUP Officer Codes

CHR Chairperson

VCH Vice Chairperson

SEC Secretary

10

MEETING PARTICIPATION AND VOTING PROCEDURES

Meeting Participation • All members can attend open meetings. Subscriber meetings (closed meetings)

may be attended only by subscribers, pending subscribers or government members. NMC Voting Member Only meetings may be attended only by NMC Voting Members. Other members may be included in Closed or NMC Voting Member Only meetings at the invitation of the Chairperson.

• At Closed meetings, audit reports are reviewed, or accreditation status of suppliers

is discussed. Voting • Nadcap Management Council: Majority of eligible members present with a

minimum of five subscriber members. • All other meetings: Majority of eligible members present with a minimum of three

subscriber members, or per Task Group procedure. • When discussing critical issues, chairperson may call for voting members or

subscriber members vote only. NMC SUPPLIER VOTING MEMBER POLICY Each Nadcap commodity task group may have one appointed supplier member with full voting privileges at Council, on non-accreditation matters. The total number of supplier voting members shall be limited to 50% of the total number of Subscriber voting members, and the number of supplier votes shall not exceed 33⅓ % of Council voting members. The Nadcap Management Council Chairperson will maintain the right to call for a Subscriber vote only.

11

PRI BOARD OF DIRECTORS

Stan Adachi Divisional Director, Supplier Quality Defense, Space and Security The Boeing Company Richard A. Amato Manager, Manufacturing Engineering MECoE, Supply Chain Division GE Aviation Severin Drogoul Vice President – Business Improvement & Quality Airbus Group Etienne Galan Vice President Purchasing Snecma (Safran Group) Michael J. Hayward Sector Director International & Logistics Excellence Northrop Grumman Aerospace Systems Mario Langlois (Chairman) Director, Quality Engineering & Safety Office Bombardier Aerospace Tony Maguire BSc, MCQI CQP Head of Quality Hawk Aircraft Programmes BAE Systems PLC Ron Meester Vice President, Global Quality Honeywell Aerospace

Anna “Graham” Morast Director, Group Quality Pratt & Whitney Andy Page CEO Sharing in Growth UK Limited c/o Rolls-Royce Plc David L. Schutt, PhD Chief Executive Officer SAE Junji Tsuji Manager of Manufacturing Technology Group of Production Planning Department, Aero-Engine and Space Operations IHI Corporation Li Wei General Director, Quality and Safety Department Aviation Industry Corporation of China Jianqiang Xu Deputy General Manager of Science, Technology & Quality Department; C919 Program Chief Quality Officer Research Fellow Commercial Aircraft Corporation of China Ltd. (COMAC)

12

Nadcap MANAGEMENT COUNCIL (NMC) Subscriber / Government Voting Members Latchezar Anguelov SAFRAN ALT/UVM +1 450 434 3400 x6243 David Bale Pratt & Whitney Canada +1 905 564 4070 Dietmar Becher Liebherr Aerospace +49 8381 46 4717 Michael Bess DCMA ALT/UVM +1 804 734 0414 Pascal Blondet Airbus +33 561 180439 Richard Blyth Rolls-Royce +44 752 897 5719 Vice Chairperson Robert Bodemuller Ball Aerospace & Technology Corp. +1 303 939 4606 Katie Bradley Lockheed Martin +1 817 655 6410 Christopher Brust DCMA +1 804 734 0345 Christian Buck SAFRAN +33 140 60 81 32 Robert Cashman Parker Aerospace Group +1 949 465 4061 David Cianfrini BAE Systems, Electronic Systems +1 603 885 4464 Russell Cole Northrop Grumman +1 321-951-5662 Jim Diamond 309th Maintenance Wing, Hill AFB +1 801 775 5318 Harold Finch Spirit AeroSystems +1 316 371 8760 Jose Eduardo Freire Embraer S.A. ALT/UVM +55 12 3927 1051

John Haddock BAE Systems – Military Air Solutions +44 1254 765015 Tim Hayes Gulfstream Aerospace +1 912 395 0171 Martha Hogan-Battisti The Boeing Company ALT/UVM Scott Iby Hamilton Sundstrand (UTAS) +1 860 654 6106 Jason Jolly Cessna Aircraft Company Karen Kim Sikorsky Aircraft +1 203 386 7630 Scott Klavon PRI Secretary (Non-Voting) +1 724 772 7111 Bob Koukol Honeywell Aerospace ALT/UVM +1 310 512 2058 Ralph Kropp MTU Aero Engines AG +49 89 4 89 4035 Serge Labbé Héroux Devtek ALT/UVM +1 450 679 5454 ext. 4264 Daniel Lecuru Airbus Helicopters +33 4 42 85 60 74 Eric LeFort Sonaca +32 71 25 5560 Howard Jeff Lott The Boeing Company +1 562 547 6645 Frank Mariot Triumph Group Inc. +1 818-917-1420 Steve McGinn Honeywell Aerospace +1 602-231-2230 Robin McGuckin Bombardier Aerospace +44 28 90462697 Michael Murray Beechcraft Corporation

Ana Cristina Ottani dos Santos Embraer S.A. +55 12 3927 8939 Rick Peterson Rockwell Collins, Inc. +1 321 768 7286 Alberto Portal Airbus Defence And Space +34 954 594 479 Fabrizio Quadrini AgustaWestland Mark Rechtsteiner GE Aviation +1 513 243 6744 Per Rehndell GKN Aerospace Sweden AB + 46 520 292 185 Brad Richwine Raytheon Company +1 508 309 8374 Victor Schonberger Israel Aerospace Industries +972 52 3663522 Lisa Shaw Eaton, Aerospace Group +1 517 937 7360 Henry Sikorski Pratt & Whitney ALT/UVM Asa Snitchler Beechcraft Corporation ALT/UVM David Soong Pratt & Whitney +1 860 557 4248 Angela Vitale Alenia Aermacchi S.p.A. Kevin Ward Goodrich (UTAS) +1 602 750 4955 Chairperson Kirk Whalen Héroux Devtek +1 519 576 8910 Ext. 2708 George Winchester Northrop Grumman ALT/UVM +1 321 951 5435 Nadcap MANAGEMENT COUNCIL Continued on next page

13

Nadcap MANAGEMENT COUNCIL (NMC)

Voting Members Continued

Supplier Voting Members Corwyn Berger Exova, Inc. (MTL Task Group) +1 630 221 0385 ext. 76209 Michael Brandt Alcoa, Inc. (Heat Treating Task Group) +1 724 337 2062 Mark Brown Kaman Aerospace Corp (AQS Task Group) +1 904 485 1441 Tim Crowe Hunting Dearborn (CMSP Task Group) +65 6933 1777

Jim Cummings Metal Finishing Company (Chemical Processing Task Group) +1 316 267 7289 Robert Custer AAA Plating & Inspection (NDT Task Group) +1 310 637 1066 ext. 223 David Jones 3P Processing Inc. (NMSE Task Group) +1 316 943 0731 David Michaud Fountain Plating Company (M&I Task Group) Tom Newton Aircraft X-Ray Laboratories (Supplier Support Committee) +1 818 262 4421

Michael Schleckman Voss Industries, Inc. (Welding Task Group) +1 216 771 7655 ext. 304 Vitorio Stana Avcorp Industries Inc. (COMP/NMMM/NMMT Task Group) +1 604 587 4880 Vern Talmadge Howmet Thermatech Coatings +1 231 894 7778 (Coatings Task Group)

14

NUCAP MANAGEMENT COUNCIL (NuMC)

NUCAP (Nadcap Users Compliance and Audit Program) provides Nadcap Prime Subscribers a uniform method for self-certification of captive special processes in accordance with industry

standards and requirements. Subscriber/Government Voting Members Latchezar Anguelov SAFRAN Group ALT/UVM Pascal Blondet Airbus Chairperson Richard Blyth Rolls-Royce Christian Buck SAFRAN Group Jim Diamond 309th Maintenance Wing – Hill AFB Harold Finch Spirit AeroSystems John Haddock BAE Systems Military Air & Information (MAI) Robert Koukol Honeywell Aerospace ALT/UVM Serge Labbé Héroux Devtek Daniel Lecuru Airbus Helicopters Jeff Lott The Boeing Company

Scott Maitland Goodrich (UTAS) ALT/UVM Muriel Malhomme Airbus ALT/UVM Frank Mariot Triumph Group Inc. Vice Chairperson Doug Matson The Boeing Company ALT/UVM Steve McGinn Honeywell Aerospace Robin McGuckin Bombardier Alberto Portal Airbus Defence And Space Fabrizio Quadrini AgustaWestland Mark Rechtsteiner GE Aviation Angela Vitale Alenia Aermacchi S.p.A. Kevin Ward Goodrich (UTAS)

15

SUPPLIER SUPPORT COMMITTEE (SSC) (Jim Borczyk, +1 724 772 8543, [email protected]) (Connie Hess, +1 724 772 8660, [email protected])

(Shannon McMeans, +1 724 772 8659, [email protected]) The Supplier Support Committee’s Mission is to represent the Supplier community and work with the Nadcap Management Council (NMC) to enhance the effectiveness and economical value of the Nadcap system for the mutual benefit of Suppliers and Subscribers. The SSC is made up of active Nadcap accredited Suppliers who are willing to help new Suppliers through the process, as well as assisting experienced Suppliers to establish, maintain and improve their accredited processes. SSC Leadership Team Lloyd Barker Alcoa Inc. (SSC LT Americas) Paul Evans JFIMS (SSC LT Europe) Dale Harmon Cincinnati Thermal Spray Inc. (SSC LT Vice Chair)

Jonathan Hebben Ducommun AeroStructures (SSC LT Secretary) Eric Jacklin F.M. Callahan & Son, Inc. (SSC LT Past Chair Advisor) Bao Lei China Iron & Steel Research Institute Group (SSC LT Asia)

David Michaud Fountain Plating Co. (SSC LT Americas) Tom Newton Aircraft X-Ray Laboratories (SSC LT Chairperson) Jim Ringer Tech Met (SSC LT Americas)

SSC Sub Team LeadersDale Harmon Cincinnati Thermal Spray (SSC Helpdesk) Jonathan Hebben Ducommun AeroStructures (Metrics) Bill Heeter Skills Inc. (Communications)

Lisa Jensen-Donahoe Alcoa (Mentor) David Michaud Fountain Plating Co. (NMC Standardization Liaison) Tom Newton Aircraft X-Ray Laboratories (Flowdown)

Jim Ringer Tech Met (Survey Action Team) Gary White Orbit Industries (SSC Task Group Representatives)

SSC Task Group Representatives Roy Adkins Braddock Metallurgical (HT Task Group) Tim Crowe Hunting Dearborn Inc. (CMSP Task Group) Brad Gould Huntington Dearborn, Inc. (M&I Task Group) Bryan Hall NSL Analytical (MTL Task Group)

Dale Harmon Cincinnati Thermal Spray Inc. (CT Task Group) John Hudspeth International Seal (Elastomer Seals Task Group) Dave Jones 3P Processing Inc. (NMSE Task Group) Dave Michaud Fountain Plating Co. (CP Task Group)

Michael Schleckman Voss Industries (Welding Task Group) Doug Schueller Abel Conn LLC (ETG Task Group) Vitorio Stana Avcorp Industries Inc. (COMP/NMMM/NMMT Task Groups) Gary White Orbit Industries, Inc. (NDT Task Group)

16

AEROSPACE QUALITY SYSTEMS (AQS) (Susan Frailey, +1 618 615 4478, [email protected])

(Mike Gutridge, +1 740 587 9841, [email protected])

The Aerospace Quality Systems Task Group is conducting audits to demonstrate compliance to the PRI AC7004. This quality system audit is required where no existing quality system approval exists in accordance with the Nadcap Operating Procedure NOP-002.

TASK GROUP VOTING MEMBERS Subscriber Voting Members Patrice Bleau Bombardier, Inc. UVM Robert Bodemuller Ball Aerospace & Technologies UVM Robin Borrelli The Boeing Company CHR/UVM (Chair – October 2012) Russell Cole Northrop Grumman Corporation UVM

David Day GE Aviation UVM Harold Finch Spirit AeroSystems, Inc. VCH/UVM Angelina Mendoza Goodrich (UTAS) UVM Earl Pruett Lockheed Martin Corp. UVM

Jeff Robb Cessna Aircraft Company ALT/UVM Patricia Wesemann The Boeing Company ALT/UVM

Supplier Voting Members Mark Brown Kaman Aerospace Corp - Jacksonville SVM David Eshleman The Young Engineers, Inc. SVM

David Jones 3P Processing SVM Debra Maier Alliant ATK Aerospace SVM

Jim Tuminello Tech Met SVM

17

AEROSPACE QUALITY SYSTEMS (AQS) (Susan Frailey, +1 618 615 4478, [email protected])

(Mike Gutridge, +1 740 587 9841, [email protected])

AQS LIAISONS Robin Borrelli The Boeing Company COMP Task Group Bruce Brownfield Lockheed Martin Corp. HT Task Group David Day GE Aviation CMSP Task Group Joel Mohnacky Hamilton Sundstrand (UTAS) CT Task Group

Earl Pruett Lockheed Martin WLD Task Group Jeff Robb Cessna Aircraft Company NMSE Task Group Gilbert Shelby Raytheon ETG Task Group Pete Torelli The Boeing Company NDT Task Group

18

CHEMICAL PROCESSING (CP) (Mike Graham +1 724 772 8646, [email protected])

(Nigel Cook, +44 870 350 5011, [email protected]) (Bill Dumas +1 724 772 8673, [email protected])

(Robert Lizewski, +1 724 772 8681, [email protected]) (William Calvert +1 724-772-8524, [email protected])

(Robert Nixon +1 724-772-8596, [email protected])

The Chemical Processing Task Group is conducting audits to demonstrate compliance to the AC7108 series of documents. These audits address the following types of processes: • Anodizing • Chemical Cleaning • Chemical Milling • Conversion/Phosphate Coating

• Etching • Laboratory Evaluation • Paint/Dry Film Coatings • Plating

• Stripping • Surface Prep Prior to Metal Bond • Surface Treatment/Passivation • Vacuum Cadmium & Aluminium IVD

TASK GROUP VOTING MEMBERS

Subscriber Voting Members Hal Abel Raytheon Co. UVM Daniel Amara Israel Aerospace Industries UVM Cary Baker The Boeing Company ALT/UVM Malik Boutoba Airbus Helicopters UVM Craig Bowden BAE Systems – MAI ALT/UVM Bob Cashman Parker Aerospace Group UVM Jim Chan Honeywell Aerospace UVM Michael Coleman The Boeing Company ALT/UVM Alessio Colombara AgustaWestland ALT/UVM Karyn Deming Goodrich (UTAS) CHR/UVM (Chair – February 2014) Bob Denney Honeywell Aerospace ALT/UVM Peter Droste Airbus UVM Robert Faticanti Textron Systems UVM Aleck Featherston Jr. Bell Helicopter Textron UVM

Sylvia Franklin The Boeing Company ALT/UVM Laurent Geerts Sonaca UVM Greg Haataja Bell Helicopter Textron ALT/UVM Gerald Harvey Triumph AeroStructures - VAD ALT/UVM John Koenig The Boeing Company UVM Martin Kolinko Eaton, Aerospace Group UVM Bob Koukol Honeywell Aerospace ALT/UVM Serge Labbé Héroux Devtek Inc. UVM Marc-André Lefebvre Héroux Devtek Inc. ALT/UVM Nathalie Le Pottier Airbus Helicopters ALT/UVM Susan Lewis Lockheed Martin Corporation UVM Mihaela Lupu SAFRAN Group ALT/UVM Nick Magnapera BAE Systems – E & I ALT/UVM Veronique Marcel SAFRAN Group UVM

Angelina Mendoza Goodrich (UTAS) ALT/UVM Tom Moreland Bombardier Inc. UVM Raj Nagarajan Gulfstream Aerospace UVM Jerker Nordh GKN Aerospace Sweden AB UVM Jim O’Shea GE Aviation ALT/UVM Eric T. Oswald Raytheon Co. ALT/UVM Jeremy Phillips Cessna Aircraft Company UVM Fabrizio Quadrini AgustaWestland UVM Muralikrishnan Ramalingam GE Aviation UVM Chris Reilly Hamilton Sundstrand (UTAS) ALT/UVM Josefa Rodriguez Baena Airbus Defence And Space UVM Corazon Santos The Boeing Company ALT/UVM Jerry Satchwell Rolls-Royce UVM Richard Shain Gulfstream Aerospace ALT/UVM

Paul Slater Rockwell Collins Inc. UVM Steve Starr Honeywell Aerospace UVM Mike Stolze Northrop Grumman Corporation VCH/UVM Yuhui Sun COMAC UVM Zia Usmani BAE Systems - MAI UVM Shawn Vierthaler Spirit AeroSystems Inc. UVM Michael Vosatka Rockwell Collins Inc. ALT/UVM Gene Wallace Triumph Aerostructures – VAD Fort Worth UVM Miao Wang COMAC ALT/UVM Wei Wang COMAC ALT/UVM Sergey Yesilevich Hamilton Sundstrand (UTAS) UVM CHEMICAL PROCESSING continued on next page

19

CHEMICAL PROCESSING (CP) (Mike Graham +1 724 772 8646, [email protected])

(Nigel Cook, +44 870 350 5011, [email protected]) (Bill Dumas +1 724 772 8673, [email protected])

(Robert Lizewski, +1 724 772 8681, [email protected]) (William Calvert +1 724-772-8524, [email protected])

(Robert Nixon +1 724-772-8596, [email protected])

TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Mark Airey Robert Stuart Ltd. ALT/SVM Daniel Backus Har-Conn Chrome Co. SVM Phillip Bratton Hohman Plating & Mfg Inc. SVM Lee Bruce Robert Stuart Ltd. SVM Larry Carlson PPI Aerospace SVM John Carpenter U.S. Chrome Corp. of Connecticut SVM Stephane Chaumeil Galion SVM Steve Crest Stabile Plating SVM Jim Cummings Metal Finishing Co. SVM Robert Custer AAA Plating & Inspection Inc. ALT/SVM Warren DeCuir Lisi Aerospace Torrance SVM Jorge DellaCosta Chrome Plus International ALT/SVM Bob Denton B-D Industries Inc. ALT/SVM Jim Denton B-D Industries Inc. SVM Bruce Dobbins Aetna Plating Company SVM William Ferris TechMetals Inc. SVM

Ben Flores Applied Aerospace Structures Corp. SVM Gary Fox Anodyne, Inc. SVM Ron Franklin ChemResearch Co. Inc. SVM Alex French Aerofin Laboratories Ltd. ALT/UVM Paul French Aerofin Laboratories Ltd. SVM Sarah Fuqua Kearfott Corporation – Motion System Division SVM Tim Hamlett Certified Metal Finishing, Inc. ALT/SVM Jonathan Hebben Ducommun Inc. SVM Bill Heeter Skills Inc. SVM Blanca E. Huerta Bowman Plating Company, Inc. SVM Eric Jacklin F.M. Callahan & Son Inc. SVM David Jones 3P Processing Inc. SVM Richard Kline X-R-I Testing SVM Keven Kudelka Westfield Electroplating Co. SVM Jeff Logan Saporito Finishing Company ALT/SVM

Rosa Martin Superior Plating Inc. SVM Cory McGraw P M Testing Laboratory Inc. SVM David Michaud Fountain Plating Co. SVM William Miller Hohman Plating & Mfg. Inc. ALT/SVM Simone Murphy-Fickenworth Chrome Plus International SVM Abdul Nathani Hi-Tech Metal Finishing ALT/SVM Julie Nguyen Element Materials Technology SVM Mike Noettl Magnetic Inspection Laboratory Inc. SVM Dihn Ngo GKN Aerospace Chem-tronics Inc. SVM Gregory Penny Triumph Processing, Embee Division, Inc. SVM Kim Porter Poly-Metal Finishing SVM Dennis Reidy CIL / Adtec SVM Ken Rettger Lord Corporation SVM Jim Ringer Tech Met SVM Cynthia Roth Team Industrial Services TCM Division SVM

Gardiner Rynne Chem Processing Inc SVM Guy Saenz Hi-Tech Metal Finishing SVM Tammi Schubert LMI Finishing Inc. SVM David Serbousek Olympic Scientific Inc. SVM Dave Sexton III Certified Metal Finishing, Inc. SVM Ken Shouse Lord Corporation ALT/SVM Steve Simacek Hytek Finishes Company SVM Vitorio Stana Avcorp Industries Inc. SVM Milt Stevenson Anoplate Corp. SVM Steve Stone Saporito Finishing Company SVM Yoshiomi Sukesada Asahi Kinzoku Kogyo Inc. SVM Mitchell Tanner Triumph Processing, Embee Division, Inc. ALT/UVM Jim Tuminello Tech Met ALT/SVM Jerry Wahlin AAA Plating & Inspection Inc. SVM

20

COATINGS (CT) (Robert Lizewski, +1 724 772 8681, [email protected])

(Jim Lewis +1 724 772 8688, [email protected])

The Coatings Task Group is conducting audits to demonstrate compliance to the PRI AC7109 series of standards. These documents contain the Nadcap requirements for the following: • Thermal Spray • Vapor Deposited Coatings • Diffusion Coating Processes • Stripping of Coating Materials

• Coating Evaluation • Plating of Coated Parts • Heat Treating of Coated Parts


Subscriber Voting Members Nicolas Barthelemy Airbus Helicopters UVM Fabrice Crabos SAFRAN Group (Turbomeca) UVM James Dunn GE Aviation UVM Ben Evans Goodrich (UTAS) UVM Jon Higgins Rolls-Royce ALT/UVM

Erkan Kilic GE Aviation ALT/UVM Björn Kjellman GKN Aerospace Sweden AB ALT/UVM Dan Loveless Parker Aerospace UVM Joel Mohnacky Hamilton Sunstrand UVM Francis Monerie-Moulin SAFRAN Group ALT/UVM

Tim Pruitt Rolls-Royce CHR/UVM (Chair – July 2011) +1 317 230 3728 Jack Saunders Honeywell Aerospace ALT/UVM Udo Schuelke Honeywell Aerospace VCH/UVM Jan Wigren GKN Aerospace Sweden AB UVM

Supplier Voting Members Brent Bartlett Sulzer Metco Canada Inc. SVM Dale Harmon Cincinnati Thermal Spray SEC/SVM

John Passmore St. Louis Metallizing SVM Steve Payne Praxair Surface Technologies SVM

Ronald Stewart Ellison Surface Technologies SVM Vern Talmadge Howmet Thermatech Coatings SVM

ATTENTION ALL Nadcap COATINGS (CT) SUPPLIERS

In order to smoothly facilitate your upcoming Nadcap initial or re-accreditation audit, the Nadcap Coatings Task Group would like you to be aware that eAuditNet contains numerous self-help documents to guide through the process. The path provided below will lead you to the Coatings Audit Resources file which is a quick and easy reference tool providing links to numerous self-help documents pertinent to every stage of the Nadcap audit process. You are encouraged to take advantage of these valuable self-diagnostic references prior to your Nadcap audit. They may help you to avoid many of the most common findings and maximize your benefit throughout the audit

while minimizing overall costs to your business.

Path: eAuditNet→Resources→Documents→Public Documents→Coatings→Coatings Audit Resources

The Nadcap Coatings Task Group is committed to continually improving the program for all participants and welcomes all suggestions that support their efforts. Please do not hesitate to contact Bob Lizewski with your suggestions or attend a Nadcap meeting to contribute your ideas in person.

21

COMPOSITES (COMP) (John Tibma +1 724 772-7148, [email protected])

The Composites Task Group is conducting audits to demonstrate compliance to the PRI AC7118. These audits address the Nadcap requirements for the following processes: • CMP – Compression Molding • CP – Core Processing • LRP – Liquid Resin Processing

• MB – Metal Bonding • PAR – Prepeg/Adhesive Bonding/Resin Film

Infusion TASK GROUP VOTING MEMBERS

Subscriber Voting Members Monica Alcala Honeywell Aerospace UVM Peter Atwell Airbus SEC/UVM Michael Bemis Goodrich (UTAS) UVM Laura Benedetti SAFRAN Group UVM Ping Chen COMAC UVM David Constable Airbus ALT/UVM Lucia Cutillo Alenia Aermacchi S.p.A UVM Suthichar Danchaiviroj Triumph Group Inc. ALT/UVM Laurent DeJaie Sonaca ALT/UVM Joseph DeVirgilio The Boeing Company ALT/UVM Kevin Dowling Spirit AeroSystems UVM Patrick Dunleavy SAFRAN Group ALT/UVM Joe Dwyer Rolls-Royce ALT/UVM

Achim Enzmann Airbus Helicopters UVM Olivier Goupillon Airbus Helicopters ALT/UVM Steve Grunshaw BAE Systems – Military & Air Information (MAI) ALT/UVM Richard Hammond The Boeing Company ALT/UVM Brett Hemingway BAE Systems – Military & Air Information (MAI) UVM Mark Jackson Triumph Group Inc. UVM Evelyn Jacobson Pratt & Whitney UVM John Key Jr. Bell Helicopter CHR/UVM (Chair – October 2012) Betty Kocsis Honeywell Aerospace ALT/UVM Eric LeFort Sonaca UVM Herman Leibovich Israel Aircraft Industries UVM Frank Lennert The Boeing Company ALT/UVM

Lance Loeks The Boeing Company UVM William Macias Goodrich (UTAS) ALT/UVM Leah Markowitz Honeywell Aerospace ALT/UVM Andreas Mastorakis GE Aviation UVM Angelina Mendoza Goodrich (UTAS) ALT/UVM Larry Olsen Northrop Grumman Corporation UVM Rick Ouellette The Boeing Company ALT/UVM Keith Panuska Lockheed Martin Corporation VCH/UVM Jeremy Phillips Cessna Aircraft Company UVM Alberto Portal Airbus Defence And Space UVM Elliott Schulte Bell Helicopter ALT/UVM Ross Smelser General Dynamics Corp. UVM Sally Spindor Triumph Group Inc. ALT/UVM

Kenneth Sposato Triumph Group Inc. ALT/UVM Anne Stanley Bombardier Inc. UVM Colin Stuart Rolls-Royce UVM Frank Thomas Bombardier Inc. ALT/UVM Justin Walker Spirit AeroSystems ALT/UVM Yuhui Yuan COMAC ALT/UVM Composites continued on next page

22

COMPOSITES (COMP) (John Tibma +1 724 772-7148, [email protected])

TASK GROUP VOTING MEMBERS CONTINUED

Supplier Voting Members Frank Alberto Park Aerospace Technologies Corp. SVM Natalia Becerra Pozo Exova (UK) Limited SVM Kevin Brennan Swift Engineering, Inc. SVM Tom Brooks Applied Composites Engineering ALT/SVM Jim Brown Hexcel Corporation SVM Doyle Butler Albany Engineered Composites Inc. SVM Gordon Cameron Integrated Technologies Inc. SVM

Patrick Durkin TE Wire Liaison Ben Flores Applied Aerospace Structures ALT/SVM Mike Guthmiller Applied Aerospace Structures SVM Rick Heise Swift Engineering, Inc. ALT/SVM Hubert Kern FACC AG SVM Tommie Lakes GKN Aerospace SVM Breton Lutz DuPont de Nemours and Company SVM

Debra Maier ATK Space Systems – Clearfield SVM Jeff Rybolt Applied Composites Engineering SVM David Scott Reinhold Industries SVM Kevin Snyder Composite Horizons SVM Vitorio Stana Avcorp Industries Inc. SVM Arno Toelkes Euro-Composites SVM Jim Weishampel Dupont de Nemours and Company ALT/SVM

23

CONVENTIONAL MACHINING AS A SPECIAL PROCESS (CMSP) (Andy Statham +44 133 286 9276, [email protected])

The Conventional Machining as a Special Process (CMSP) Task Group is conducting audits to demonstrate compliance to the AC7126 series of checklists for conventional machining as a special process. These audits address the following types of processes:

• Holemaking • Turning • Grinding

• Broaching • Milling • Edge Treatment

TASK GROUP VOTING MEMBERS Subscriber Voting Members Ken Abram Honeywell Aerospace CHR/UVM (Chair – October 2011) Ertem Aygin GE Aviation ALT/UVM Charles Beargie Goodrich (UTAS) UVM Zeljko Calija Goodrich (UTAS) ALT/UVM

Philippe Durand Airbus Helicopters UVM Vincent Dutilh SAFRAN Group UVM Dan Graves Goodrich (UTAS) ALT/UVM Yann Jeffredo SAFRAN Group VCH/ALT/UVM

Scott Maitland Goodrich (UTAS) ALT/UVM John Pfeiffer GE Aviation SEC/UVM Alex Pohoata Honeywell Aerospace ALT/UVM Douglas Webb Honeywell Aerospace ALT/UVM

Supplier Voting Members Tim Crowe Hunting Dearborn Inc. SVM Brad Gould Hunting Dearborn Inc. ALT/SVM

James Jensen Moeller Manufacturing Co SVM Andy March Hunting Dearborn Inc. ALT/UVM

Karsten Riemer Aerotech Peissenberg GmbH SVM

24

ELASTOMER SEALS (SEALS) (Keith Purnell +1 724 772 8685, [email protected])

The Elastomer Seals Task Group is conducting product audits to demonstrate compliance to AC7115. Audit elements include: O-rings, plate seals / rubber bonded to substrates, molded shapes, compounding & compression seals.

TASK GROUP VOTING MEMBERS Subscriber Voting Members Michelle Brunet The Boeing Company ALT/UVM Tara Campbell Rolls-Royce UVM Brent Clothier Cessna Aircraft Company UVM Kent DeFranco Lockheed Martin Corporation UVM Melissa Facas Pratt & Whitney UVM

Marc Gage Hamilton Sundstrand (UTAS) UVM David Grulke Hamilton Sundstrand (UTAS) ALT/UVM Patrick Heppe The Boeing Company UVM Jeffrey Kingsley Air Force UVM/GVT Manuel Koucouthakis Honeywell Aerospace CHR/UVM (Chair – October 2005)

Benjamin Shaw Rolls-Royce ALT/UVM Bob Teegarden Honeywell Aerospace ALT/UVM Estrella Watson Goodrich (UTAS) VCH/UVM

Supplier Voting Members Jon Cutler Trelleborg Sealing Solutions SVM John Dickinson Parker Hannifin ALT/SVM John Hudspeth International Seal SVM

Mark Keal Meggitt Aerospace Limited SVM Scott Kronabetter Micro-tronics Inc. SVM Royce McDaniel Parker Hannifin SVM

David Sykes Meggitt Aerospace Limited ALT/SVM

25

ELECTRONICS (ETG) (Susan Frailey +1 618 615 4478, [email protected])

(Phil Ford, +44 (0) 1443 225545 [email protected]) The Electronics Task Group is conducting electronics audits to demonstrate compliance to AC7119 Printed Boards, AC7120 Circuit Card Assemblies, and AC7121 Cable and Harness Assemblies.


Subscriber Voting Members Roger Bloomfield Goodrich (UTAS) ALT/UVM William Cardinal Hamilton Sundstrand (UTAS) UVM Frank Cristofol BAE Systems UVM Roy Garside Rolls-Royce VCH/UVM Jerome Hery SAFRAN Group ALT/UVM Eric Lacourt Thales UVM

Philippe Larivee Thales ALT/UVM Nathalie LeFevre SAFRAN Group UVM John Mastorides Honeywell Aerospace ALT/UVM/SEC Scott Meyer Goodrich (UTAS) UVM Junta Okutsu Honeywell Aerospace ALT/UVM Norberto Roiz-Lafuente Airbus Defence And Space UVM

Richard Rumas Honeywell Aerospace CHR/UVM (Chair-January 2014) Gilbert Shelby Raytheon Company UVM Magali Vigier Airbus UVM Barbara Waller Raytheon Company ALT/UVM

Supplier Voting Members Julie Barker Cristek Interconnects, Inc ALT/SVM Cristiano Bazzi Somacis SpA SVM Paul Comer Graphic Plc SVM Jose Lages Meggitt Sensing Systems SVM Donna Lopez Cristek Interconnects, Inc SVM

Jean-Francois Mahe SELHA SVM Ishwar Mathur IEC Electronics Corp. - Newark SVM Douglas Schueller AbelConn LLC SVM Matthew Smith Logic PD ALT/SVM

Kees van der Schoor Fokker Elmo B.V. SVM Juan Vasquez Viasystems North American Operations SVM Tim Voeller Logic PD, Inc SVM Jennifer Wagner Ducommun LaBarge Tech SVM

26

FLUID DISTRIBUTION SYSTEMS (FLU) (Keith Purnell +1 724 772 8685, [email protected])

The Fluid Distribution Standards Task Group is conducting product audits to demonstrate compliance to AC7112, AC7112/1, AC7112/2, AC7112/3, AC7112/4, AC7112/6 and AC7123. These audits address the following: • Hose Manufacturing • Fittings & Other Machined Components • Couplings

• Hose Assembly • Value Added Hose Assembly Distributors • Titanium Tubing Manufacturers


Subscriber Voting Members Keith Allen Rolls-Royce guUVM James Barnett Rolls-Royce ALT/UVM Joe Bebey The Boeing Company ALT/UVM Samuel Buri The Boeing Company VCH/UVM

Terence Chin NAVAIR UVM/GVT Erwin Oman Bombardier UVM Mark Paul Rolls-Royce UVM Robert Schreiber The Boeing Company CHR/UVM (Chair – September 2008) +1 610 591 7660

Mark Scott The Boeing Company UVM Dan Smith GE Aviation UVM

Supplier Voting Members Mark Scatoloni Spencer Aerospace Manufacturing, LLC SVM

Michael Schleckman Voss Industries SVM Chris Schofield Hydraflow SVM

Phillip Wade Smiths Tubular Systems - Laconia SVM

27


HEAT TREATING (HT) (Jerry Aston + 44 133 286 9273, [email protected])

(Marcel Cuperman +1 412 367 2547, [email protected]) (Rob Hoeth +1 724 772 8657, [email protected])

(Stan Revers + 44 133 286 9271, [email protected])

The Heat Treating Task Group has developed AC7102 requirements and checklists that include the following: • Metal Systems – Carbon & Alloy Steels, Stainless Steel, pH Stainless Steels, Cast Iron, Aluminum Alloys, Titanium Alloys, Heat Resisting Alloys,

Magnesium, Other Nonferrous Metals • Heat Treating Process – Normalizing, Annealing, Hardening and Tempering, Solution Heat Treating, Aging, Carburizing, Nitriding, Stress Relieving,

Vacuum Brazing, Induction Hardening • Heat Treating Equipment – Furnace, Pyrometry, Instrumentation, Atmospheric Control System • Brazing

TASK GROUP VOTING MEMBERS Subscriber Voting Members Pedro Aranda Eaton, Aerospace Group UVM Carolyn Backus The Boeing Company ALT/UVM Arie Ben Dov Israel Aerospace Industries UVM Tawny Blumenshine Cessna Aircraft Company UVM Shaun Brewin Rolls-Royce ALT/UVM Bruce Brownfield Lockheed Martin Corp. SEC/UVM Frank Brungs MTU Aero Engines AG UVM Craig Clasper Spirit AeroSystems UVM Cedric Colas SAFRAN Group ALT/UVM Michael Corsino Hamilton Sundstrand (UTAS) UVM Bernd Daniels MTU Aero Engines AG ALT/UVM Martin Day Honeywell Aerospace UVM Peter Edwards Airbus ALT/UVM Andreas Elbs Liebherr-Aerospace SAS UVM Mark Emerson Rolls-Royce UVM

Sergio Esposito Alenia Aermacchi S.p.A UVM Melissa Facas Pratt & Whitney UVM Robert Faticanti Textron Systems UVM Laurent Geerts SONACA UVM Cristina Gonzalez-Perez Airbus Defence And Space UVM Peter Hammarbo GKN Aerospace Sweden AB UVM Gerald Harvey Triumph Group, Inc. UVM Wayne Hillstead 309th Maintenance Wing-Hill AFB ALT/UVM Linnie Hook Cessna Aircraft Company ALT/UVM Andrew Hopkins BAE Systems (MAI) UVM Billy Hulse Spirit AeroSystems Inc ALT/UVM David Isenberg Parker Aerospace Group UVM Kent Johnson 309th Maintenance Wing-Hill AFB ALT/UVM Stephen Johnson Triumph Group, inc. ALT/UVM Karen Kim Sikorsky Aircraft ALT/UVM Jeff Koss The Boeing Company ALT/UVM

Serge Labbé Héroux Devtek Inc. ALT/UVM Marc-André Lefebvre Héroux Devtek Inc. UVM Stefan Lemberger Airbus Helicopters ALT/UVM Hongping Li COMAC ALT/UVM Weitao Ma COMAC UVM William Macias Goodrich (UTAS) ALT/UVM Doug Matson The Boeing Company UVM John Merritt Sikorsky Aircraft UVM Alessandro Miglio AgustaWestland ALT/UVM Thomas Norris Goodrich (UTAS) (Chair- October 2012) +1 858-436-5443 Eddy Pham Northrop Grumman Corporation UVM Fabrizio Quadrini AgustaWestland UVM Sunder Rajan Raytheon Co UVM Chris Reilly Hamilton Sundstrand (UTAS) ALT/UVM Alex Richez Airbus UVM

Thomas Ruglic Bell Helicopter UVM Simon Scott BAE Systems (MAI) ALT/UVM Gary Sigmon 309th Maintenance Wing-Hill AFB UVM Mariusz Stanczyk Lockheed Martin Corporation ALT/UVM William Stewart Bombardier Inc. UVM Marc Taillandier Airbus Helicopters UVM Jeff Thyssen GE Aviation UVM Louis Tremblay Bombardier Inc. ALT/UVM Cyril Vernault SAFRAN Group VCH/UVM Doug Webb Honeywell Aerospace ALT/ UVM Tom Wilson Bombardier Inc. ALT/UVM Grzegorz Wryk Rolls-Royce (AEC) ALT/UVM Ji Yuan COMAC ALT/UVM HEAT TREATING continued on next page

28


HEAT TREATING (HT) (Jerry Aston + 44 133 286 9273, [email protected])

(Marcel Cuperman +1 412 367 2547, [email protected]) (Rob Hoeth +1 724 772 8657, [email protected])

(Stan Revers + 44 133 286 9271, [email protected])


Supplier Voting Members Griff Braddock Braddock Metallurgical Inc SVM Michael Brandt Alcoa Inc. SVM Mark Brown Kaman Aerospace Corp SVM Robert Cvetichan Paulo Products Company (American Brazing Division) SVM Edward Engelhard Solar Atmospheres, Inc. SVM Dennis Fried Carpenter Technology SVM Tom Glosser Astro Aluminum Treating SVM

Alexander Klyuch Blades Technology Ltd SVM John Kunkle Howmet Castings & Services, Inc. Dover Casting (AHDC) SVM Bob Lehnen Bodycote Thermal Processing SVM Richard Lewis PCC Structurals – Carson City SVM Johanna Lisa Continental Heat Treating / Quality Heat Treating SVM Michael Niedzinski Constellium France SVM Timothy Paradis Metallurgical Processing Inc. SVM

Bill Rogers Alcoa – ZAO “AMR” SVM Kevin Seidel Universal Stainless SVM Stuart Sherman Metallurgical Processing Inc. ALT/SVM Dave Shonts Metal Finishing Company Inc. SVM Jeffrey Sipf Haynes International SVM Tom Valenti Specialty Steel Treating SVM

29


MATERIALS TESTING LABORATORIES (MTL) (Kevin Wetzel, +1 724 772 8652, [email protected])

(Jim Lewis +1 724 772 8688, [email protected]) (Rob Hoeth +1 724 772 8657, [email protected])

(Robert Lizewski, +1 724 772 8681, [email protected])

This task group has published the checklists (AC7101, AC7101/1-9, AC7101/11, & AC7006) for Materials Testing Laboratories. Types of activities being accredited: • ISO/IEC 17025 Requirements • Chemical Testing • Mechanical Testing

• Metallography (Micro & Macro) • Hardness • Corrosion

• Microhardness • DTA • Test Specimen Preparation


Subscriber Voting Members David Bale Pratt & Whitney UVM Pietro Bonarrigo Bombardier Inc. UVM Philippe Brailly SAFRAN Group ALT/UVM Thomas Brendel MTU Aero Engines AG ALT/UVM Ben Clark Eaton, Aerospace Group UVM George Coste SAFRAN Group UVM Doug Deaton GE Aviation UVM George Doviak Goodrich (UTAS) UVM Kevin Elston Spirit AeroSystems UVM Colin Fletcher Bell Helicopter Textron UVM

Jim Hartman Honeywell Aerospace ALT/UVM Stuart Hunt Airbus ALT/UVM John Knie The Boeing Company ALT/UVM Jeff Koss The Boeing Company ALT/UVM Frank Lennert The Boeing Company UVM Muriel Malhomme Airbus UVM Patricia Matkowski The Boeing Company ALT/UVM Jennifer McKeegan Cessna Aircraft Company UVM Olivier Molinas Airbus Helicopters UVM

Tim Myers Honeywell Aerospace CHR/UVM (Chair – October 2011) +1 602 284 5637 [email protected] Amanda Rickman Raytheon Co. VCH/UVM Lindsay Schurle Spirit Aerosystems ALT/UVM Christian Schwaminger MTU Aero Engines AG UVM Armen Talverdian The Boeing Company ALT/UVM Gary Winters Northrop Grumman Corporation UVM Verl Wisehart Rolls-Royce SEC/UVM MATERIALS TESTING LABORATORIES continued on next page

30

MATERIALS TESTING LABORATORIES (MTL) (Kevin Wetzel, +1 724 772 8652, [email protected])

(Jim Lewis +1 724 772 8688, [email protected]) (Rob Hoeth +1 724 772 8657, [email protected])

(Robert Lizewski, +1 724 772 8681, [email protected])

TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Siobhan Alekna SPS Technologies SVM Frank Anderson Lucideon M+P ALT/SVM Corwyn Berger Exova, Inc. SVM Wayne Brege Cannon Muskegon SVM Philip Bretz Metcut Research Associates, Inc. ALT/SVM Massimo Capriolo Bytest SRL SVM Eric Chabault Bureau Veritas Laboratories SVM Matthew Chamberlain-Webber Timet UK Limited SVM John Chir Latrobe Specialty Steel SVM Deena Crossmore IMR Test Labs SVM Kay Fisher Bohler Edelstahl GmbH & Co KG SVM Stephan Greimers Outokumpu VDM GmbH SVM Brian Griffin Howmet Research Corp. SVM

Robert Haldane Alcoa, Inc. SVM Bryan Hall NSL Analytical Services Inc. SVM Kevin Hineman ATI Allegheny Ludlum SVM Don Huffman Lisi Aerospace SVM Steven Keck Carpenter Technology Corp. ALT/SVM David Luoni Element Materials Technology SVM Bob Olevson Element Materials Technology ALT/SVM Jacob Padrul Constellium France SVM Frank Peszka Laboratory Testing Inc. SVM Annette O’Connell Haynes International Inc. SVM Ben Ransom RTI Int’l Metals, Inc. Tradcp, Inc. SVM Douglas Reed Special Metals Corp. SVM Pierre-Emmanuel Richy Aubert & Duval SVM

James D. Rossi Westmoreland Testing SVM Peter Scrimshire Special Metals Wiggin Ltd. – IncoTest SVM Dave Serbousek Olympic Scientific, Inc. SVM Byron Skillings ATI Ladish Forging SVM Shirley Strickland Lucideon M+P SVM T. Rao Tipirneni Long Island Testing Labs. Inc. SVM Simon Tournebize Aubert & Duval ALT/SVM Jennifer Tret Element Materials Technology Daleville LLC SVM Jeff Viney Metcut Research Associates, Inc. SVM Kevin VonScio Perryman Company SVM Margaret Willis ATI Allvac Monroe SVM Jason Wright Atlas Testing Laboratories SVM

31

MEASUREMENT & INSPECTION (M&I) (James Bennett +1 724 772 8651, [email protected])

The Measurement & Inspection Task Group is conducting audits to demonstrate compliance to PRI AC7130 checklists. These audits address the Nadcap requirements for the following processes: • AC7130/1 CMM – Coordinate Measuring Machines

TASK GROUP VOTING MEMBERS Subscriber Voting Members Phil Bamforth Rolls-Royce ALT/UVM Randall Becker The Boeing Company ALT/UVM Al Berger GE Aviation UVM Lance Christie Sikorsky Aircraft UVM Mark Clark The Boeing Company ALT/UVM

Chris Davison Spirit AeroSystems UVM Greg Goldhagen Hamilton Sundstrand (UTAS) UVM Cristina Gonzalez-Perez Airbus Defence And Space UVM Simon Gough-Rundle Rolls-Royce CHR/UVM (Chair- June 2013) +44 1332 291936 Norman Gross The Boeing Company VCH/UVM

Jacques Kerault Airbus UVM Cyril Lerebours SAFRAN Group UVM Mark Rechtsteiner GE Aviation ALT/UVM Steve Row Goodrich (UTAS) UVM Darren Yochum Rolls-Royce ALT/UVM

Supplier Voting Members Takahito Araki IHI Corporation SVM Gordon Cameron LMI Aerospace ALT/SVM Dave Eshleman The Young Engineers, Inc. SVM

Brad Gould Hunting Dearborn SVM Lisa Leonard National Physical Laboratory SVM Dave Michaud Fountain Plating Co. SVM

Tammi Schubert LMI Finishing, Inc, SVM

32

NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT (NMSE) (Brian Manty +1 727-480-5180, [email protected])

The Nonconventional Machining and Surface Enhancement (NMSE) Task Group is conducting audits to demonstrate compliance to the AC7116 series of checklists for nonconventional machining and the AC7117 checklist for surface enhancement. These audits address the following types of processes: Nonconventional Machining • Electrochemical Machining • Electrochemical Grinding

• Electrical Discharge Machining – Fast Hole, Sinker, Wire, EC Drilling

• Laser Beam Machining – Cutting, Drilling

TASK GROUP VOTING MEMBERS Nonconventional Machining Sub-Task Group

Subscriber Voting Members Ken Abram Honeywell Aerospace ALT/UVM Zeljko Calija Goodrich (UTAS) UVM Caroline Des Landes Bombardier, Inc. UVM Vincenzo DeRosa Alenia Aermacchi S.p.A. UVM Peter Edwards Airbus ALT/UVM Simon Long Airbus UVM Dan Loveless Parker Aerospace UVM

David McCallister UTC/Pratt & Whitney SEC/UVM Steven Meyer Spirit AeroSystems, Inc. UVM Gudrun Muehlbauer MTU Aero Engines AG UVM Jeremy Phillips Cessna Aircraft Co. ALT/UVM Alex Pohoata Honeywell Aerospace CHR/UVM (Chair – January 2013) +1 602 799 7546 Holger Polanetzki MTU Aero Engines AG ALT/UVM

Jeffrey Robb Cessna Aircraft Co. UVM Mike Schmidt GE Aviation ALT/UVM Nouman Usmani GE Aviation UVM Donald Williams GE Aviation ALT/UVM Paul Woolley Rolls-Royce VCH/UVM Evren Yuksekkaya GE Aviation ALT/UVM

Supplier Voting Members Jeffrey Kupis Micro-Tronics, Inc. SVM Tim Scarlett Danville Metal Stamping Co., Inc. SVM

Mark Singer Kessington Machine SVM Gigi Streeter Barnes Aerospace SVM

NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT continued on next page

33

NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT (NMSE) (Brian Manty +1 727-480-5180, [email protected])


Surface Enhancement Sub-Task Group Surface Enhancement • Automated Peening • Computer Controlled Peening • Flapper Peening

• Manual Peening • Peen Forming

Subscriber Voting Members Ken Abram Honeywell Aerospace ALT/UVM Zeljko Calija Goodrich (UTAS) UVM Alessio Colombara AgustaWestland S.p.A. ALT/UVM Caroline Des Landes Bombardier, Inc. UVM Vincenzo DeRosa Alenia Aermacchi S.p.A. UVM Peter Edwards Airbus ALT/UVM Cristina Gonzalez-Perez Airbus Defence And Space UVM Glen Heide The Boeing Company ALT/UVM

Serge Labbé Héroux Devtek ALT/UVM Marc-André Lefebvre Héroux Devtek Inc. UVM Simon Long Airbus UVM Dan Loveless Parker Aerospace UVM David McCallister UTC/Pratt & Whitney SEC/UVM Steven Meyer Spirit AeroSystems, Inc. UVM Gudrun Muehlbauer MTU Aero Engines AG UVM John Pfeiffer GE Aviation ALT/UVM

Jeremy Phillips Cessna Aircraft Co. ALT/UVM Alex Pohoata Honeywell Aerospace CHR/UVM (Chair – January 2013) +1 602 231 4134 Holger Polanetzki MTU Aero Engines AG ALT/UVM K. T. Quader The Boeing Company UVM Fabrizio Quadrini AgustaWestland S.p.A. UVM Jeffrey Robb Cessna Aircraft Co. UVM Mike Schmidt GE Aviation UVM Kenneth Sposato Triumph Aerostructures – VAD UVM

Michael Steele The Boeing Company ALT/UVM Greg Syvertson Bell Helicopter Textron UVM Donald Williams GE Aviation ALT/UVM Paul Woolley Rolls-Royce VCH/UVM Evren Yuksekkaya GE Aviation ALT/UVM

Supplier Voting Members Steve Connally Curtiss Wright Surface Technologies SVM

Alexander Klyuch Blades Technology Ltd. SVM Dave Jones 3P Processing, Inc. SVM

Dawn Stokes PTI Industries Inc. SVM Yoshiomi Sukesada Asahi Kinzoku Kogyo Inc. SVM

34

NONDESTRUCTIVE TESTING (NDT) (Mark Aubele, +1 724 772 8654, [email protected]) (Jim Bennett, +1 724 772 8651, [email protected]) (Phil Ford, +44 (0) 1443 225545 [email protected])

(Mike Gutridge, +1 740 587 9841, [email protected]) (Andy Statham +44 (0) 133 286 9276, [email protected])

(David Marcyjanik, +1 724 772 7113, [email protected]) The Nondestructive Testing Task Group is currently reviewing audit reports and making recommendations to Nadcap Council on accreditation for the following tests: • Magnetic Particle • Liquid Penetrant • Ultrasonic Survey-Rotating Components

• Ultrasonic • Radiography • Computed Radiography

• Eddy Current • Digital Radiography, Digital Detector Array

TASK GROUP VOTING MEMBERS Subscriber Voting Members Charles Alvarez Goodrich (UTAS) ALT/UVM Steve Bauer Northrop Grumman Corp. UVM Philippe Beck Airbus Helicopters UVM Alain Bouchet SAFRAN Group UVM Juergen Burchards MTU Aero Engines AG UVM Fangmei Chu Honeywell Aerospace Phoenix – ALT/UVM Antonio Cilberto Alenia Aermacchi S.p.A UVM Mike Clark Sikorsky Aircraft UVM Massimo Colombo Ge Avio S.r.l. UVM Richard Costantino Goodrich (UTAS) UVM Michael Daehling Cessna Aircraft Company ALT/UVM Timothy Doane 309th Maintenance Wing – Hill AFB UVM Chris Dootson BAE Systems – Military & Air Information (MAI) UVM Jim Fowler Pratt & Whitney ALT/UVM

Steven Garner Eaton, Aerospace Group UVM Frederic Girard Pratt & Whitney Canada UVM Jim Graves Rolls-Royce ALT/UVM Luis Grijalva Lockheed Martin Corporation UVM Thomas Mike Guinn Bell Helicopter Textron ALT/UVM Harry Hahn GE Aviation UVM Robert Hogan Honeywell Aerospace - Phoenix UVM Ed Hohman Bell Helicopter Textron UVM Scott Iby Hamilton Sundstrand (UTAS) ALT/UVM Dr. Hans-Hermann Kopp MTU Aero Engines AG ALT/UVM Serge Labbé Héroux Devtek Inc ALT/UVM Marc-André Lefebvre Héroux Devtek Inc ALT/UVM Donald MacLean Raytheon Co UVM Steve McCool Honeywell Aerospace South Bend – ALT/UVM Phoenix - ALT/UVM

Luigi Merletti AgustaWestland UVM Michael Mitchell Hamilton Sundstrand (UTAS) UVM Dale Norwood Parker Aerospace Group UVM Scott O’Connor Honeywell Aerospace ALT/UVM Gary O’Neill Parker Aerospace Group ALT/UVM Justin Payne Cessna Aircraft Company UVM Robert Rainone Goodrich (UTAS) ALT/UVM Robert Reynolds The Boeing Company - BDS ALT/UVM David N. Royce Pratt & Whitney VCH/UVM Victor Schonberger Israel Aerospace Industries ALT/UVM Bobby Scott Bombardier, Inc. CHR/UVM (Chair – October 2012) Uri Sol Israel Aerospace Industries UVM Christopher Stevenson Rolls-Royce UVM Terho Sulkupuro GKN Aerospace Sweden AB UVM

D. Scott Sullivan Honeywell Aerospace – Tempe – ALT/UVM Phoenix - ALT/UVM Pat Thompson Honeywell Aerospace – Torrance – ALT/UVM Phoenix - ALT/UVM Dominique Tomasso SAFRAN Group ALT/UVM Walter Tonizzo Héroux Devtek Inc UVM Peter Torelli The Boeing Company UVM Louis Truckley The Boeing Company ALT/UVM Tony Warren Airbus SEC/UVM Frank Whittaker Spirit AeroSystems Inc ALT/UVM Alun Williams Airbus ALT/UVM Jim Winter Spirit Aerosystems UVM Sean Wood Triumph Group UVM Jinqiu Zhou Comac UVM NONDESTRUCTIVE TESTING continued on next page

35

NONDESTRUCTIVE TESTING (NDT) (Mark Aubele, +1 724 772 8654, [email protected]) (Jim Bennett, +1 724 772 8651, [email protected]) (Phil Ford, +44 (0) 1443 225545, [email protected])

(Mike Gutridge, +1 740 587 9841, [email protected]) (Andy Statham +44 (0) 133 286 9276, [email protected])

(David Marcyjanik, +1 724 772 7113, [email protected])

TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Christopher Andersen PCC Structurals Inc. LPC SVM Mike Ashton Hexcel Corporation SVM Andy Bakewell E. M. Inspection Co Ltd SVM Shawn Ballou Wyman SVM Douglas Barra X-R-I Testing/Integrity Aerospace ALT/SVM Martyn Bills Exova (UK) Limited ALT/SVM N. David Campbell West Penn Testing Group SVM Massimo Capriolo BYTEST SRL ALT/SVM Claude Chambon Aubert & Duval SVM Dwayne Cooper Wyman Gordon ALT/SVM Nathalie Crozat-Vigier SKF Aerospace France SVM

Robert Custer AAA Plating & Inspection, Inc. SVM Douglas Davis Alcoa Fastening Systems SVM Paul Evans James Fisher NDT SVM Richard Gasset LISI Aerospace - Torrance SVM David Gray Mitchell Laboratories Inc SVM Robert Henchar Integrity Aerospace Group SVM Helmuth Hoeller FACC SVM Paul Johnson Firth Rixson Forgings Ltd. SVM Jeff Jones Alloy Processing Inc PCC Aerostructures SVM Richard King New Hampshire Ball Bearings Inc. SVM

Josef Maier Bohler Edelstahl GmbH & Co KG SVM John Massie TurboCombustor Technology SVM Cory McGraw PM Testing Laboratory Inc. SVM William McKessy Alcoa Howmet SVM David Mitchell Composite Inspection Solutions SVM Julie Nguyen Element Materials Technology SVM Blair James O’Connell Precision Castparts Corp SVM Patrick O’Leary Nu-Pro Limited SVM Mark Pennington Firth Rixson Forgings Ltd. ALT/SVM Mark Pompe West Penn Testing Group ALT/SVM

Jonathan Pugh Exova (UK) Limited SVM Steve Radelich Jorgensen Forge SVM Cindy Roth TEAM Industrial Services TCM Division-Cincinnati SVM Frank Saenz Hi-Tech Metal Finishing ALT/SVM Guy Saenz Hi-Tech Metal Finishing SVM Michael Steele Northstar Aerospace Chicago Inc. SVM Gary White Orbit Industries Inc SVM

36

NON METALLIC MATERIALS MANUFACTURING (NMMM) (John Tibma +1 724 772-7148, [email protected])

The Non Metallic Materials Manufacturing Task Group is conducting audits to demonstrate compliance to the PRI AC7124. These audits address the Nadcap requirements for the following processes:

• Resin Manufacturing • Prepeg Manufacturing • Adhesive Manufacturing

TASK GROUP VOTING MEMBERS Subscriber Voting Members Monica Alcala Honeywell Aerospace ALT/UVM Peter Atwell Airbus SEC/UVM Michael Bemis Goodrich (UTAS) UVM Laura Benedetti SAFRAN Group UVM Ping Chen COMAC UVM David Constable Airbus ALT/UVM Joseph DeVirgilio The Boeing Company ALT/UVM Kevin Dowling Spirit AeroSystems UVM Patrick Dunleavy SAFRAN Group ALT/UVM

Joe Dwyer Rolls-Royce ALT/UVM Achim Enzmann Airbus Helicopters UVM Olivier Goupillon Airbus Helicopters ALT/UVM Steve Grunshaw BAE Systems-Military Air & Information (MAI) ALT/UVM Brett Hemingway BAE Systems-Military & Air Information (MAI) UVM Mark Jackson Triumph Group Inc. UVM Evelyn Jacobson Pratt & Whitney UVM John Key Jr. Bell Helicopter CHR/UVM (Chair – October 2012)

Betty Kocsis Honeywell Aerospace UVM Frank Lennert The Boeing Company ALT/UVM Lance Loeks The Boeing Company UVM Muriel Malhomme Airbus ALT/UVM Leah Markowitz Honeywell Aerospace ALT/UVM Andreas Mastorakis GE Aviation UVM Keith Panuska Lockheed Martin Corporation VCH/UVM Jeremy Phillips Cessna Aircraft Company UVM

Alberto Portal Airbus Defence And Space UVM Elliott Schulte Bell Helicopter ALT/UVM Sally Spindor Triumph Group Inc. ALT/UVM Ken Sposato Triumph Group Inc. ALT/UVM Anne Stanley Bombardier Inc. UVM Colin Stuart Rolls-Royce UVM Justin Walker Spirit AeroSystems ALT/UVM Yuhui Yuan COMAC ALT/UVM

Supplier Voting Members Frank Alberto Park Aerospace Technologies Corp. SVM Natalia Becerra Pozo Exova (UK) Limited SVM Jay Berndt Toray Composites America Inc ALT/SVM

Jim Brown Hexcel Corporation SVM Douglas Jacques Renegade Materials Corporation SVM Rick Price Park Aerospace Technologies Corp ALT/SVM

Don Russell Toray Composites America Inc ALT/SVM Colleen Saunders Toray Composites America Inc SVM Steve Schrameyer Cytec Engineered Materials SVM Vitorio Stana Avcorp Industries Inc. SVM

Arno Toelkes Euro-Composites SVM Nancy Vancil Toray Carbon Fibers America Inc. SVM

37

NON METALLIC MATERIALS TESTING (NMMT) (John Tibma +1 724 772-7148, [email protected])

The Non Metallic Materials Testing Task Group is conducting audits to demonstrate compliance to the PRI AC7122-I for Independent Testing Laboratories, PRI AC7122-P for Part Manufacturers Captive Laboratories and PRI AC7122-R for Raw Materials Manufacturers Captive Laboratories. These audits address the Nadcap requirements for the testing of Class A: Composites and Class B: Adhesive/Adhesive Primer

• Mechanical Testing • Physical Testing

• Chemical Testing • Thermal Testing

• Flammability Testing


Subscriber Voting Members Monica Alcala Honeywell Aerospace ALT/UVM Peter Atwell Airbus SEC/UVM Michael Bemis Goodrich (UTAS) UVM Laura Benedetti SAFRAN Group UVM Peter Bonarrigo Bombardier Inc. ALT/UVM Ping Chen COMAC UVM David Constable Airbus ALT/UVM Joseph DeVirgilio The Boeing Company ALT/UVM Kevin Dowling Spirit AeroSystems UVM

Patrick Dunleavy SAFRAN Group ALT/UVM Joe Dwyer Rolls-Royce ALT/UVM Achim Enzmann Airbus Helicopters UVM Olivier Goupillon Airbus Helicopters ALT/UVM Steve Grunshaw BAE Systems-Military & Air Information (MAI) ALT/UVM Brett Hemingway BAE Systems-Military & Air Information (MAI) UVM Mark Jackson Triumph Group Inc. UVM Evelyn Jacobson Pratt & Whitney UVM

John Key Jr. Bell Helicopter CHR/UVM (Chair – October 2012) Betty Kocsis Honeywell Aerospace UVM Frank Lennert The Boeing Company ALT/UVM Lance Loeks The Boeing Company UVM Muriel Malhomme Airbus ALT/UVM Leah Markowitz Honeywell Aerospace ALT/UVM Andreas Mastorakis GE Aviation UVM Larry Olsen Northrop Grumman Corporation UVM Keith Panuska Lockheed Martin Corporation VCH/UVM

Jeremy Phillips Cessna Aircraft Company UVM Alberto Portal Airbus Defence And Space UVM Elliott Schulte Bell Helicopter ALT/UVM Sally Spindor Triumph Group Inc. ALT/UVM Kenneth Sposato Triumph Group Inc. ALT/UVM Anne Stanley Bombardier Inc. UVM Colin Stuart Rolls-Royce UVM Justin Walker Spirit AeroSystems ALT/UVM Yuhui Yuan COMAC ALT/UVM

Supplier Voting Members Frank Alberto Park Aerospace Technologies Corp. SVM Natalia Becerra Pozo Exova (UK) Limited SVM Paul Braun Cincinnati Testing Labs SVM Jim Brown Hexcel Corporation SVM Gordon Cameron Integrated Technologies Inc. SVM

William DeLaurier IMR Test Labs SVM Douglas Jacques Renegade Materials Corporation SVM Dennis Kidd Cincinnati Testing Labs Inc. ALT/SVM Tommie Lakes GKN Aerospace SVM

John Moylan Delsen Testing Labs SVM Rick Price Park Aerospace Technologies Corp ALT/SVM Jim Rossi Westmoreland Mechanical Testing SVM Don Russell Toray Composites ALT/SVM

Colleen Saunders Toray Composites SVM Steve Schrameyer Cytec Engineered Materials SVM Vitorio Stana Avcorp Industries Inc. SVM Nancy Vancil Toray Carbon Fibers America Inc. SVM Nicolas Vetel Critt-Materiaux MPC SVM

38

SEALANTS (SLT) (Keith Purnell +1 724 772 8685, [email protected])

The Nadcap Sealants program consists of two types of audits: (1) Sealant Manufacturers: AC7200/1 - on-site inspection of aerospace sealant manufacturers (2) Value-Added Sealant Distributors: AC7202 Testing and fabrication techniques included in the audit criteria: • Two-Part Polysulfide Sealants • Silicones and Fluorosilicones • Polyurethanes

• Adhesion Promoters • Coatings and Coating Processes • Peel Panels, Shear Specimens, Tensile Bars


Subscriber Voting Members Jerry Brown Lockheed Martin Corp. ALT/UVM Brent Clothier Cessna Aircraft Company VCH/UVM Kent DeFranco Lockheed Martin Corp. CHR/UVM (Chair – December 2011)

Aleck Featherston Bell Helicopter Textron UVM Jeffrey Kingsley Air Force UVM/GVT Diane Kleinschmidt NAVAIR UVM/GVT Manuel Koucouthakis Honeywell Aerodapce UVM

Angelina Mendoza Goodrich (UTAS) ALT/UVM Raj Nagarajan General Dynamics Corp. UVM Estrella Watson Goodrich (UTAS) SEC/UVM

Supplier Voting Members Jim Carney NSL Aerospace SVM Suzanna DeMoss 3M Company Aerospace and Aircraft Maintenance Department SVM Derek Hughes PPG Aerospace PRC DeSoto ALT/SVM John Lane Integral Products Inc. SVM

Josh Mazin Flamemaster Corp ALT/SVM David Nickerson Packaging Systems Inc. SVM Philip Shackley PPG Aerospace/PRC DeSoto Intl. SVM Linda Smith Flamemaster Corporation SVM

Jeff Steele D Aircraft Products Inc. SVM Randy Wilt Graco Supply Company SVM Jonathan Zook 3M Company Aerospace and Aircraft Maintenance Department ALT/SVM

39


WELDING (WLD) (Ian Simpson +44 1332 869272, [email protected])

(Mike Gutridge +1 740 587 9841, [email protected]) (Stan Revers +44 1332 869271, [email protected])

Process specific requirements have been developed by the Welding Task Group and are contained in the AC7110 series of checklists. Welding processes covered include: • Diffusion Welding • Electron Beam Welding • Flash Welding • Friction/Inertia Welding • Fusion Welding

• Laser Welding • Percussion Stud Welding • Resistance Welding • Torch/Induction Brazing

• Welder/Welding Operator Qualification

• Evaluation of Welds

TASK GROUP VOTING MEMBERS Subscriber Voting Members Robbie Adams Honeywell ALT/UVM Osawonuyi Agbonkonkon Parker Hannifin Corp ALT/UVM Gary Coleman The Boeing Company ALT/UVM Caroline DesLandes Bombardier Inc ALT/UVM Andrew Dewhurst BAE Systems Military Air & Information (MAI) ALT/UVM Chris English GE Aviation SEC/UVM William Fitzgerald Northrop Grumman Corp. UVM Bob Fletcher BAE Systems Military Air & Information (MAI) UVM Stephen Geldart Eaton Aerospace ALT/UVM Larry Hamanishi The Boeing Company ALT/UVM

Milan Hanyk Honeywell Aerospace UVM Les Hellemann GE Aviation ALT/UVM/ALT/SEC Valere Henry SAFRAN Group UVM Tommy Howland Spirit Aerosystems ALT/UVM Scott Iby Hamilton Sundstrand (UTAS) ALT/UVM Michael Irvin The Boeing Company UVM Jerry Isoaho GKN Aerospace Sweden AB UVM Günther Jakobi Rolls-Royce ALT/UVM Hugh Jamison Bombardier inc ALT/UVM Ralph Kropp MTU Aero Engines AG CHR/UVM (Chair – July 2008) +49 89 1489 4035

Holger Krueger Airbus UVM Mario Leclerc Bombardier Inc. UVM Donald Lenhart Spirit AeroSystems Inc UVM Dag Lindland Pratt & Whitney UVM Scott Maitland Goodrich (UTAS) UVM Joel Mohnacky UTC Aerospace (Hamilton Sundstrand) UVM Lyle Morris Raytheon Company UVM Rick Peterson Rockwell Collins Inc MBR Jeremy Phillips Cessna Aircraft Company ALT/UVM Marco Luigi Poletto Alenia Aermacchi SpA UVM

Earl Pruett Lockheed Martin Corp UVM Brian Ricks Raytheon Company ALT/UVM Paul Slater Rockwell Collins Inc MBR Ken Sposato Triumph Group UVM Tim Storm Parker Hannifin Corp UVM David Struckman Eaton, Aerospace Group UVM Steve Tooley Rolls-Royce VCH/UVM Gary Winters Northrop Grumman Corp ALT/UVM

Supplier Voting Members James Ahlemeyer Ducommun AeroStructures SVM Christopher Kielb Advance Welding SVM

Melinda Mitton Advance Welding ALT/SVM Angelo Monzo Barnes Aerospace ALT/SVM James A. Olejarczyk Alcoa Power and Propolsion SVM

David Osenar PAKO, Inc. ALT/SVM Mike Schleckman Voss Industries Inc SVM Jackie Sternot PAKO, Inc. SVM

Gigi Streeter Barnes Aerospace SVM

40

E-mail Addresses and Telephone Extensions for PRI Staff

(Performance Review Institute - USA +1 724.772.1616) (Performance Review Institute - Europe +44.870.350.5011) (Performance Review Institute - China +86.10.6461.9807) (Performance Review Institute - Japan + 81.568.35.3520)

Adrian, Deb Scheduler +1.724.772.8653 [email protected] Aston, Jerry Associate Program Manager - Heat Treating +44.133.286.9273 [email protected] Aubele, Mark Senior Program Manager - AQS, Electronics, Measurement &

Inspection and NDT +1.724.7728654 [email protected]

Ayres, Jamie Scheduler +1.724.772.8582 [email protected] Beard, Danielle Office Coordinator – Europe +44.870.350.5011 [email protected] Benkart, Joyce CSR – Chemical Processing +1.724.772.8643 [email protected] Bennett, Jim Senior Staff Engineer – NDT, Measurement & Inspection +1.724.772.8651 [email protected] Bigsby, Chris Marketing & Communications Administrator +44.870.350.5011 [email protected] Bliss, Linda Nadcap Training Coordinator / Document Control

Administrator +1.724.772.8674 [email protected]

Bonar, Amanda European Support Coordinator +44.870.350.5011 [email protected] Borczyk, Jim Director, Customer Support and Industry Relations +1.724.772.8543 [email protected] Brock, Samantha Registrar Process Coordinator +1.724.772.8664 [email protected] Burkholder, Scott Sales Engineer +1.724.772.8667 [email protected] Calvert, Will Senior Staff Engineer - Chemical Processing +1.724.772.8524 [email protected] Conroy, Karen Manager, Human Resources and Administration +1.724.772.7171 [email protected] Cook, Nigel Lead Staff Engineer - Chemical Processing +44.133.286.9274 [email protected] Cuperman, Marcel Senior Staff Engineer - Heat Treating +1.412.367.2547 [email protected] DiMatteo, Cindi Accounting Manager +1.724.772.8668 [email protected] Dumas, Bill Senior Staff Engineer - Chemical Processing +1.724.772.8673 [email protected] Eckels, Jennifer Coordinator, Nadcap Auditor Staffing +1.724.772.8579 [email protected] Ford, Phil Staff Engineer – NDT & ETG +44.1443.225.545 [email protected] Frailey, Susan Staff Engineer – AQS & ETG +1.618.615.4478 [email protected] Godfrey, Hannah Senior Specialist - Professional Development Program,

Europe +44.870.350.5011 [email protected]

Gondek, Rebekah Manager – Nadcap Quality and NUCAP +1.724.772.7116 [email protected] Graham, Mike Sr. Program Manager - Chemical Processing, Composites,

Conventional Machining as a Special Process, Nonconventional Machining and Surface Enhancement

+1.724.772.8646 [email protected]

Grubbs, Wendy QPL Development Coordinator +1.724.772.8647 [email protected] Gutridge, Mike Lead Senior Staff Engineer - NDT, AQS and Welding +1.740.587.9841 [email protected] Hess, Connie Supervisor, Supplier and Subscriber Services +1.724.772.8660 [email protected] Hill, Joe Registrar Production Planning and Control Specialist +1.724.772.8691 [email protected] Hoeth, Rob Staff Engineer - Heat Treating and Materials Testing

Laboratories +1.724.772.8657 [email protected]

Ippolito, Lisa Manager, Purchasing, Facilities & Travel Management +1.724.772.4093 [email protected] Jingyu, Tang (Riki) Nadcap China Coordinator +86.10.6461.9807 [email protected] Joliffe, Claire European Nadcap Support Coordinator +44.870.350.5011 [email protected] Joseph, Rhonda Professional Development eQuaLified Coordinator +1.724.772.8644 [email protected] Kegerreis, E. J. Director, Registrar Sales and Marketing +1.724.772.4094 [email protected] Klavon, Scott Director, Nadcap Program and Aerospace Operations +1.724.772.7111 [email protected]

Kornrumpf, Jennifer Senior CSR - Coatings, Materials Testing Laboratories, and

NMSE +1.724.772.8680 [email protected]

Kosis, Susan Cost Accountant +1.724.772.8650 [email protected] Kucan, Pete Director, Registrar Operations +1.724.772.7170 [email protected] Kurtyka, Crystal Professional Development Coordinator – eQuaLearn +1.724.772.8537 [email protected] Le, Liu Manager, PRI Asia/Pacific +86.10.6461.9807 [email protected] Leigh, Joanna Marketing Manager +44.870.350.5011 [email protected] Lewis, Jim Program Manager - Coatings, Elastomer Seals, Fluids,

Materials Testing Laboratories, Sealants and QPL +1.724.772.8688

[email protected]

Lizewski, Robert Staff Engineer - Chemical Processing, Coatings and Materials Testing Laboratories


Logan, Phylis Registrar Process Specialist +1.724.772.8641 [email protected] Manty, Brian Interim Staff Engineer, NM/SE +1 727 480 5180 [email protected] Marcyjanik, David Staff Engineer – Nondestructive Testing +1.724.772.7113 [email protected]

41








E-mail Addresses and Telephone Extensions for PRI Staff

(Performance Review Institute - USA +1 724.772.1616) (Performance Review Institute - Europe +44.870.350.5011) (Performance Review Institute - China +86.10.6461.9807) (Performance Review Institute - Japan + 81.568.35.3520)

Martin, Seema Director, European Operations, Global Marketing,

Professional Development and European Business Development


McCabe, Justin Research & Development Specialist +1.724.772.8693 [email protected] McKinley, Stacey CSR – AQS, NDT and Welding +1.724.772.8566 [email protected] McMeans, Shannon Coordinator, Supplier & Subscriber Services +1.724.772.8659 [email protected] McSorley, Brittany CSR – Elastomer Seals, Fluids, Heat Treating and Sealants +1.724.772.7574 [email protected] Morrill, Lacy Registrar Process Coordinator +1.724.772.8648 [email protected] Nixon, Robert Senior Staff Engineer, Chemical Processing +1.724.772.8596 [email protected] Novak, Linda Manager, Auditor Planning & Scheduling +1.724.772.8669 [email protected] O’Connor, Kellie Nadcap Program Coordinator +1.724.772.8676 [email protected] Parvez, Shariq Software Engineer +1.724.772.8686 [email protected] Petrucci, Melanie CSR – Conventional Machining as a Special Process,

Composites/NMMM/NMMT, Electronics and M&I +1.724.772.8642 [email protected]

Phillis, Jim Controller +1.724.772.8565 [email protected] Pinto, Joe Executive Vice President and Chief Operating Officer +1.724.772.7175 [email protected] Ploucha, Mike Subscriber Support Specialist +1.513.552.5071 [email protected] Pollock, Brett Sales Engineer +1.724.772.7567 [email protected] Powers, Ian Software Developer +1.724.772.4073 [email protected] Purnell, Keith Staff Engineer - Elastomer Seals, Fluids, and Sealants +1.724.772.8685 [email protected] Rasmussen, Takako PRI Japan Coordinator +81.568.35.3520 [email protected] Revers, Stan Senior Staff Engineer - Heat Treating & Weld +44.1332.869.271 [email protected] Rigot, Dina Registrar Process Specialist +1.724.772.8682 [email protected] Roach, Kellie Associate CSR – AQS, NDT, Welding +1.724.772.7173 kroach@p-r-i-org Rubright, Julie Executive Assistant & HR Coordinator +1.724.772.8595 [email protected] Sanchez, David Professional Development Administrator – Europe +44.870.350.5011 [email protected] Sanz, Christine Manager, Legal Services +1.724.772.8584 [email protected] Shiveley, Chelsea Business Systems Support Coordinator +1.724.772.7110 [email protected] Shultz, Glenn Senior Data Analyst +1.615.382.5075 [email protected] Simpson, Ian Associate Program Manager - Welding +44.133.286.9272 [email protected] Statham, Andy Senior Staff Engineer - Conventional Machining as a Special

Process & NDT +44.133.286.9276 [email protected]

Stefanakis, Louise Business Systems Manager +1.724.772.8658 [email protected] Stefanchik, Michele Supervisor – eQuaLearn +1.724.772.8645 [email protected] Steffey, Jon Program Manager, Informatics Solutions +1.724.772.7505 [email protected] Tibma, John Staff Engineer – Composites/NMMM/NMMT +1.724.772.7148 [email protected] Washington, A’Raiyna Informatics Support Coordinator +1.724.772.8687 [email protected] Wetzel, Kevin Senior Staff Engineer - Materials Testing Laboratories +1.724.772.8652 [email protected] Yu, Shanwen Software Engineer +1.724.772.8675 [email protected] Zajacs, Lisa Registrar Process Specialist +1.724.772.8671 [email protected]

42






Training Sessions

eAuditNet Overview for Subscribers Monday, 23rd June

Directly following the Subscriber Orientation & Tutorial

eAuditNet Overview for Suppliers Tuesday, 24th June

Directly following the Supplier Orientation & Tutorial

43

Nadcap Customer Support Initiative (NCSI)

The Nadcap Customer Support Initiative (NCSI) is a free, web based training program designed to teach suppliers more about the Nadcap process. The training reviews many topics including: audit preparation, a review of Nadcap Operating Procedures, information on common findings, Root Cause advice and more. To better support the Nadcap supplier community, the Nadcap Customer Support Initiative (NCSI) training is now available online. This means greater flexibility and availability for suppliers, who can benefit from the information at their convenience. The presentation is available on www.eAuditNet.com under Public Documents in the General Document section or on www.p-r-i.org under Nadcap in the Supplier Info section. After reviewing, if a supplier has any questions regarding the presentation, they may contact a member of the Global Scheduling team.

Subscriber Orientation & Tutorial All new Subscriber participants are advised to attend the Nadcap Subscriber Introduction at 9:00 a.m. on Monday, 23rd June. The tutorial is a general Nadcap presentation geared toward Subscribers. It provides the audience an overview of the structure and functionality of the Nadcap program. As well as the opportunity to ask general Nadcap questions.

Supplier Orientation & Tutorial All new Supplier participants are advised to attend the Nadcap Supplier Introduction at 9:00 am on Tuesday, 24th June. The tutorial is a general Nadcap presentation geared toward Suppliers. It provides the audience an overview of the structure and functionality of the Nadcap program, as well as the opportunity to ask general Nadcap questions.

Supplier Support Committee (SSC)

The Supplier Support Committee’s (SSC) Mission is to represent the supplier community and work with the Nadcap Management Council (NMC) to enhance the effectiveness and economical value of the Nadcap system for the mutual benefit of Suppliers and Subscribers. The SSC is made up of active Nadcap accredited Suppliers who are willing to help new Suppliers through the process, as well as assisting experienced Suppliers to establish, maintain and improve their accredited processes. The focus of the SSC is on the overall Nadcap procedural process and issues which affect all Nadcap accredited Suppliers. The SSC offers a Supplier Mentoring program, dedicated to assisting those Suppliers who are new to the process and/or those needing assistance with navigating through the Nadcap system by providing names and contact information of experienced Nadcap Suppliers. If you would like to work with a Mentor please send an email to [email protected]. All suppliers are urged to attend the SSC Meeting on Tuesday, 24th February from 5:00 pm-7:00 pm to learn more about changes within the Nadcap program, provide feedback on issues that affect them and ask general Nadcap questions.

44

http://www.eauditnet.com/

http://www.pri-network.org/


NOTES

45

cdn.p-r-i.org · Nadcap is an unprecedented cooperative industry effort to improve quality, while...

Documents

Transcript of cdn.p-r-i.org · Nadcap is an unprecedented cooperative industry effort to improve quality, while...