F E AT U R E S:

• Provides a superior seal in applications that experience excessivemovement due to thermal expansion (i.e. Heat Exchangers)

• Premium oxidation resistant Polycarbon APX2 sealing or Teflon

• Maintains high bolt loads in exchanger applications

• Excellent recovery characteristics in cycling applications

• Wide Temperature range from cryogenic to 2000˚F dependingon application, facing and core material

• Wide Pressure Range from Vacuum to 3700 PSI depending onapplication, facing and core material

• Seals at low seating stress which makes it ideal for a wide variety offlange types

• Conforms and seals imperfections in flange surfaces

• Design facilitates ease of installation due to rigid core

• Used in various countries for over 70 years

• Resists over compression, creep relaxation and blowout

• Provides an effective seal under severe operating conditions

• Exceptional gasket for critical applications

• Provides a high level of sealability

• Low relaxation

• Standard 316L Stainless Steel core

FLEXIBLE GRAPHITE or PTFE

SERRATED SEALING RING

.125”

.002-.004”

.012”-.016”

.020”

KAG™ GASKKAG™ GASKEETTAdvanced Sealing’s camprofile KAG™ gasket is a superior alternative to double jacketed clad gaskets in heat exchanger applications. This style of gasket provides a high level of sealabilityfrom hydro-test through the run cycle including plant upsets. This gasket can be supplied withany rib configuration, metallurgy and facing material to suit most applications.

www.advseal.com 13452 Alondra Blvd. Cerritos, CA 90703 • Phone: 562-802-7782 • Fax: 562-802-7742

The properties and application parameters shown throughout this data sheet are typical. Your specific application should not be undertaken without independent study and evaluation for suitability. For specific application recommendations consult Advanced Sealing and Supply Company. Failure to select proper sealing products could result in property damage and/or serious personal injury.