Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods
-
Upload
dexby-p-de-guzman -
Category
Documents
-
view
169 -
download
3
Transcript of Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods
![Page 1: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/1.jpg)
PHYSICAL WASTEWATER TREATMENT METHODS
Adsorption and Reverse Osmosis and Other Physical Treatment Methods
Dexby de Guzman (2010)
![Page 2: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/2.jpg)
ADSORPTION WITH ACTIVATED CARBON
![Page 3: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/3.jpg)
Adsorption with Activated Carbon
Adsorption is the process of collecting solublesubstances within a solution on a suitable interface.
In wastewater treatment, adsorption with activatedcarbon—a solid interface—usually follows normalbiological treatment, and is aimed at removing aportion of the remaining dissolved organic matter.
Particulate matter present in the water may also beremoved.
![Page 4: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/4.jpg)
Activated Carbon
Activated carbon is produced by heatingchar to a high temperature and thenactivating it by exposure to an oxidizinggas at high temperature.
The gas develops a porous structure inthe char and thus creates a large internalsurface area.
The activated char can then be separatedinto various sizes with differentadsorption capacities.
![Page 5: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/5.jpg)
Types of AC
Granular Activated Carbon (GAC), which has a diameter greater than 0.1 mm, and
Powdered Activated Carbon (PAC), which has a diameter of less than 200 mesh.
![Page 6: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/6.jpg)
Surface Area of AC
One gram of AC has asurface area =1200 square metersas large as a footballfield.
![Page 7: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/7.jpg)
Adsorption process
It is the vast internal surface that gives activated carbonits unique ability to adsorb a wide range of compoundsfrom both the gas and liquid phases.
Once the targeted compound is in contact with theactivated carbon, it diffuses into its pores and is locked inplace by weak Van der Waals forces.
![Page 8: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/8.jpg)
Regeneration Process
Carbon is regenerated by removing the adsorbed organiccompounds through steam, thermal, or physical/chemicalmethods.
Thermal and steam regeneration are the most commonmethods to regenerate carbon used for wastewatertreatment. These methods volatilize the organiccompounds that have adsorbed onto the carbon.
Physical/chemical regeneration uses a solvent, which canbe a water solution, to remove the organic compounds.
![Page 9: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/9.jpg)
Adsorber Design
A fixed-bed column is often used to bring the waste-water into contact with GAC. The water is applied to thetop of the column and withdrawn from the bottom,while the carbon is held in place.
Backwashing and surface washing are applied to limithead loss build-up.
![Page 10: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/10.jpg)
Adsorber Design
![Page 11: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/11.jpg)
Carbon AdsorberSystems by Siemens Water Technologies
![Page 12: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/12.jpg)
Other Configurations
Expanded-bed and moving-bed carbon contactors havebeen developed to overcome the problem of head lossbuild-up.
In the expanded-bed system, the influent is introducedat the bottom of the column and is allowed to expand.
In the moving-bed system, spent carbon is continuouslyreplaced with fresh carbon.
![Page 13: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/13.jpg)
DESIGN PARAMETERS
1. Properties of Granular Activated Carbon
Particle Size Distribution
Surface Area - In general, the larger the surface area is,the greater is the adsorption capacity; however, thissurface area needs to be effective.
![Page 14: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/14.jpg)
Properties of Granular Activated Carbon
Pore Volume - a measure of the total pore volume within the
carbon particles in cubic centimeters per gram (cm3/g).
Iodine Number - measure of the volume present in poresfrom 10 to 28 Å (10–10 m) in diameter.
Molasses Number - measure of the volume in pores greaterthan 28 Å in diameter.
![Page 15: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/15.jpg)
Properties of Granular Activated Carbon
• Abrasion Number - measures the ability of carbonto withstand handling and slurry transfer.
• Apparent Density - the mass (weight) of aquantity of carbon divided by the volume itoccupies (including pore volume and interparticlevoids, adjusted for the moisture content).
• Bulk Density - the unit weight of the carbonwithin the adsorber.
![Page 16: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/16.jpg)
2. Isotherm
An isotherm is the relationship that shows thedistribution of adsorbate (material adsorbed)between the adsorbed phase (that adsorbed on thesurface of the adsorbent) and the solution phase atequilibrium.
Monolayer or multilayer adsorption
![Page 17: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/17.jpg)
Isotherm Models
Langmuir: qe = Q0KC/(KC +1)
--- monolayer adsoprtion
Freundlich: qe = KFC1/n
--- often used to be the best relation
Brauner, Emmet and Teller:
qe = BCQ0/[(Cs-C)(1+(B-1)(C)/Cs)]
--- multilayer adsorption
![Page 18: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/18.jpg)
3. Breakthrough Curves
The breakthrough curve can be defined as the “S”shaped curve that typically results when the effluentadsorbate concentration is plotted against time orvolume.
The break-through point is the point on thebreakthrough curve where the effluent adsorbateconcentration reaches its maximum allowableconcentration, which often corresponds to thetreatment goal.
![Page 19: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/19.jpg)
![Page 20: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/20.jpg)
4. Mass Transfer Zone
The mass transfer zone (MTZ) is the area within theadsorbate bed where adsorbate is actually beingadsorbed on the adsorbent.
The MTZ typically moves from the influent end towardthe effluent end of the adsorbent bed during operation.
![Page 21: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/21.jpg)
Real-life WW Applications
• Nurture Shampoo Manufacturing Co., Ltd. WWTPin India
• Tertiary Treatment
• The main purpose of using the activated carbonadsorption is to remove the color of the effluenttreated water for reusing to the cooling tower,fire fighting, floor washing, gardening, roadcleaning, and GAC back washing.
![Page 22: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/22.jpg)
![Page 23: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/23.jpg)
REVERSE OSMOSIS
![Page 24: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/24.jpg)
Reverse Osmosis (RO)
RO is a membrane-based demineralizationtechnique used to separate dissolved solids,such as ions, from solution (most applicationsinvolve water-based solutions, which is the focusof this work).
Membranes in general act as perm-selectivebarriers, barriers that allow some species (suchas water) to selectively permeate through themwhile selectively retaining other dissolved species(such as ions).
![Page 25: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/25.jpg)
![Page 26: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/26.jpg)
Osmosis
Osmosis is a natural process wherewater flows through a semipermeablemembrane from a solution with a lowconcentration of dissolved solids to asolution with a high concentration ofdissolved solids.
![Page 27: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/27.jpg)
![Page 28: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/28.jpg)
Design Parameters
1. Flow Rating (in gpm)
2. Recovery = permeate/influent
3. Rejection = retained/influent
4. Flux = volumetric flow rate of a fluid through a given area.
5. Concentration polarization - has a negative effect on theperformance of an RO membrane.
6. Fouling is a result of deposition of suspended solids,organics, or microbes on the surface of the membrane,typically on the feed /concentrate side.
![Page 29: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/29.jpg)
Designs: Membrane Modules
Reverse osmosis membranes for industrialapplications are typically modularized usingconfigurations that pack a large amount of membranearea into a relatively small volume.
Economical
Smaller area
Easy installation and replacement
![Page 30: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/30.jpg)
1. Plate and Frame
Plate and frame RO modules are typically usedfor specialty, high suspended solids applicationsand are not generally found in water- purificationfacilities.
These modules consist of flat sheets ofmembrane that are modularized into plates,typically two membranes placed back to backper plate. The plates are then stacked within aframework for support.
![Page 31: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/31.jpg)
Plate and Frame
![Page 32: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/32.jpg)
2. Tubular
Tubular modules are also used for specialty,high-solids applications typically found in thefood and biological processing industries.
These modules essentially resemble a shell-and-tube heat exchanger, with the RO feedwater on the tube side and RO permeate on theshell side.
![Page 33: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/33.jpg)
Tubular
![Page 34: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/34.jpg)
3. Spiral Wound
Spiral wound membrane modules are the mostcommon type of module used for RO today Themajor advantage of a spiral wound module isthat the packing density is fairly high.
Influent that enters the spiral wound moduledoes so tangentially to the membrane surfaceand the reject exits the module at the endopposite of the influent. Water that permeatesthe membrane does so perpendicularly to thesurface of the membrane and is collected .
![Page 35: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/35.jpg)
Spiral Wound
![Page 36: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/36.jpg)
Closer View of Spiral Wound
![Page 37: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/37.jpg)
Why Spiral Wound?
![Page 38: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/38.jpg)
4. Hollow Fine Fiber
• Hollow fine fiber RO modules aremembranes formed into very small-diametertubes, with an outside diameter of about 85microns and an inside diameter of about 42microns.
• The fibers resemble human hair and can be asflexible. The membrane “skin” or thin film ison the outside of the fiber.
![Page 39: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/39.jpg)
Ho
llow
Fin
e F
ibe
r
![Page 40: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/40.jpg)
Comparisons
![Page 41: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/41.jpg)
Real-life WW Applications
• In a sewage treatment facility in
![Page 42: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/42.jpg)
15 RO units
1 RO unit = 5 million gallons per day
= 150 pressure vessels
1 pressure vessel = 7 spiral wound elements
P = 150 – 220 psi
Product is said to be distilled quality.
![Page 43: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/43.jpg)
OTHER PHYSICAL TREATMENT METHODS
![Page 44: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/44.jpg)
UV Disinfection
UV spectrum lies between X rays and visible light.
Most bacteria do not have enzymes to repair UV damage.
UV lamps are specially manufactured mercury lamp.
![Page 45: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/45.jpg)
Ion Exchange
• Ion exchange is a unit process in which ions of a givenspecies are displaced from an insoluble exchangematerial by ions of a different species in a solution..
• The most widespread use of this process is in domesticwater softening, where Na ions from a cationic-exchange resin replace the Ca and Mg ions in thetreated water, thus reducing hardness.
• It has been use in wastewater applications for theremoval of nitrogen, heavy metals, and TDS.
![Page 46: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/46.jpg)
Ion Exchange Equipment
![Page 47: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/47.jpg)
Water Softening Cycle
• Service
• Regeneration
a. Backwash
b. Brine
c. Rinse
d. Flush
RegenerationService
![Page 48: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/48.jpg)
Miscellaneous Physical Treatment Methods
Evaporation/Distillation
Dewatering/Drying
Electrolytic recovery
Solvent extraction
![Page 49: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/49.jpg)
References
Kucera, J. Reverse Osmosis: Industrial Applications and Processes. Massachusets, U.S.A.: Scrivener Publishing LLC, 2010.
U.S. Army Corps of Engineers. Adsorption Design Guide. 2001.
Tchobanoglous, G. Wastewater Engineering: Treatment and Reuse. McGraw-Hill Companies, 2003.
![Page 50: Adsorption, Reverse Osmosis and Miscellaneous Physical Wastewater Treatment Methods](https://reader033.fdocuments.in/reader033/viewer/2022042623/551ddcc549795955198b4ff0/html5/thumbnails/50.jpg)
Thank you for listening!