Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal...

28
Adjustment of Triangulation

Transcript of Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal...

Page 1: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Adjustment of Triangulation

Page 2: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Introduction

• Triangulation was the preferred method for horizontal control surveys until the EDM was developed

• Angles could be measured to a high level of accuracy

• Measured baseline distances were included every so often to strengthen the network

Page 3: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.
Page 4: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Azimuth Observation Equation

Page 5: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Arctangent Function for Azimuth

xi yi xj yj xj-xi yj-yi atan2(dy,dx) atan(dx/dy)

0 0 0.500 0.866 0.500 0.866 30 30

0 0 0.866 0.500 0.866 0.500 60 60

0 0 1.000 0.000 1.000 0.000 90 #DIV/0!

0 0 0.866 -0.500 0.866 -0.500 120 -60

0 0 0.500 -0.866 0.500 -0.866 150 -30

0 0 0.000 -1.000 0.000 -1.000 180 0

0 0 -0.500 -0.866 -0.500 -0.866 -150 30

0 0 -0.866 -0.500 -0.866 -0.500 -120 60

0 0 -1.000 0.000 -1.000 0.000 -90 #DIV/0!

0 0 -0.866 0.500 -0.866 0.500 -60 -60

0 0 -0.500 0.866 -0.500 0.866 -30 -30

0 0 0.000 1.000 0.000 1.000 0 0

Page 6: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Azimuth Examples

0°30°

60°

90°

120°

150°

180°

-150°

-120°

-90°

-60°

-30°

X

Y

Page 7: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Correction Term

• Even if we use a full-circle arc tangent function we may still need a correction term

• This can happen where the azimuth is near ±180°

• Check the K-matrix term (measured minus computed)

• If it is closer to ±360° than it is to 0°, correction is needed

Page 8: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Linearizing the Azimuth Equation

Page 9: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Other Partials

Page 10: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Linearized Azimuth Observation Equation

Page 11: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Angle Observation Equation

Page 12: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Angle Observation Equation

Page 13: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Linearized Form

Page 14: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Example 14.1

Page 15: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

First – Initial Approximations

Page 16: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Approximations - Continued

Page 17: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Approximations - Continued

Page 18: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Determine Computed Values for Angles and Distances

Page 19: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Computed Values - Continued

Page 20: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Set Up MatricesFirst, we need to define the Backsight, Instrument, and Foresight stations for the observed angles.

angle B I F

θ1 U R S

θ2 R S U

θ3 U S T

θ4 S T U

Page 21: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

J Matrix

Note: Rho (ρ) is the conversion factor from radians to seconds. This complication can be avoided by keeping all angles in radian units (for example, in the K matrix).

Page 22: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

K Matrix

If this was in radians, we wouldn’t need Rho. Also, the second value should be zero. (why?)

Page 23: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Compute Solution and Update Coords

Note: Further iterations produce negligible corrections.

Page 24: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Compute StatisticsResiduals: V = J X - K

S0

Page 25: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Coordinate Standard Errors

Page 26: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Other Angle Networks

• Resection – more than 3 points is redundant

• Triangulated quadrilaterals

• Other geometric shapes

Page 27: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Resection

Page 28: Adjustment of Triangulation. Introduction Triangulation was the preferred method for horizontal control surveys until the EDM was developed Angles could.

Triangulated QuadrilateralA

B

CD