Adjustable Filament Spool Holder with MMU Bearings...8.2 MB 4.12 hrs f 0.20 mm k 0.40 mm h PLA 44.10...
Transcript of Adjustable Filament Spool Holder with MMU Bearings...8.2 MB 4.12 hrs f 0.20 mm k 0.40 mm h PLA 44.10...
7.50 hrs
2 pcs
f
0.20 mm
k
0.40 mm
h
1
77.00 g
d
MK3/S
Print Files (.gcode) DOWNLOAD ALL FILES
Summary
I works with regular filament spools of 1kg, 2.2 kg and even wider spools.Use bearings and aluminum rods from MMU as seen in the presentationpicture.
3D Printers > Other Accessories
R Romulus
AdjustableFilament SpoolHolder with MMUBearings
VIEW IN BROWSER
updated 3. 4. 2020 | published 3. 4. 2020
8.2 MB
4.12 hrs f 0.20 mm k 0.40 mm h PLA 44.10 g d MK3/S
updated 3. 4. 2020
6.3 MB
3.38 hrs f 0.20 mm k 0.40 mm h PLA 33.10 g d MK3/S
updated 3. 4. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
161.2 KBupdated 3. 4. 2020
616.5 KBupdated 3. 4. 2020
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-NonCommercial
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
01_02mm_pla_mk3s_4h7m.gcode
02_02mm_pla_mk3s_3h23m.gcode
01.stl
02.stl