ABOUT MCC4X4 · changing landscape and demanding on and off road conditions. ... SUV’s original...

I N T E R N AT I O N A L C ATA L O G U E

Established in 1999, MCC 4X4 has been a major 4WD equipment manufacturer and distributor for over a decade. MCC’s 4WD products are renowned, loved and operated by 4WD enthusiasts globally.

MCC offers a comprehensive range of accessories and equipment to suit almost every 4x4 vehicle. Our wide product range offers customers the choice of accessories such as Bull Bars, Nudge bars, Rear Bars, Wheel Carriers, Side Steps and Rails, Roof Racks, Draws System, Recovery Kits, camping gear and etcetera.

MCC’s experience and technical expertise in manufacturing 4WD accessories enables us to supply our customers with a wide variety of products which will improve the vehicle’s appearance, perfor-mance and functionality.

ABOUT MCC4X4Since we have manufactured and distributed our products both locally and overseas, we therefore understand the varying requirements toward 4WD equipment. To be accepted by worldwide customers, MCC endeavours to continue development of new innovative products which are of superior quality and design and will ultimately enhance the 4WD’s performance. We love our four wheel-driving just like you do, so we strive to make the most out of it by providing our customers with the finest quality 4WD equipment.

At MCC we believe in offering our customers the widest possible range of products and assisting them to make tailored decisions for their vehicle’s specific requirements. So you can rest assured in the confidence that you have got everything you need from our factory. We can guarantee that you will be left satisfied from the experience of purchasing directly from MCC and possess total confidence in our products; everything we manufacture has been thoroughly tested and proven under the most extreme of condi-tions. We also provide nationwide warranty support as part of our dedicated customer service mandate.

MCC Industrial New has set up their Australia national office, showrooms and warehouse,

“MCC 4X4 ACCESSORIES PTY LTD” To assist distributors and retail customers with pre and after sales back up, advise and spare parts. It also allows MCC manufacturing to have direct contact with Australian 4x4 workshops and 4x4 enthusiasts. So we can meet the requirements of Australian 4x4 owners, and develop new products for 4x4 vehicles, enable us to handle Australians always changing landscape and demanding on and off road conditions.

For the past 30 years MCC have been manufacturing and supplying automotive components worldwide. We have been producing bull bars and 4x4 accessories for the over decades for an array of 4WD com-panies in Australia and exporting to over 30 other countries. While not always being under the MCC name, out bars have seen it all, from the High country to the Kimberly and some amazing trip to the Cape. Through scrub, sand and mud out bars have the safety and quality that Australian’s demand.

MCC4X4 ACCESSORIES PTY LTDTHOMASTOWN, AUSTRALIA

We proudly manufacture our products in Thailand in our solely owned manufacturing facility, to the highest quality assurance

the world has to offer. As you may not be aware the majority of 4wd vehicles are manufactured in Thailand, this gives our factory direct access to vehicle for development of new and innovative 4x4 products for the Australian and world markets. We can guarantee the quality and durability of our products, due to the fact that our modern manu-facturing plant and skilled technicians are among the best within the

automotive production and manufacturing industry.Safety is our number one priority; let’s face it, why wouldn’t it be. Our bars are independently tested to ensure they are ADR compliant and Airbag compatible. It is this vigorous testing that makes our bars per-fect for the outback and city streets of Australia. We have been in the industry for many years and look forward to serving you for decades to come.

CONTENTSMCC 4X4 ACCESSORIES

MCC BULL BARS2 Rocker bars4 Phoenix bars5 Falcon bars6 Classic bars

7 Nudge bars

REAR PROTECTION8 Rocker rear bars9 Jack rear bars10 Rear bars with wheel carrier11 Rear bars with jerry can holder

12 ROLL BARS

13 SIDE PROTECTION Side steps & Side rails

14 ROOF RACKS

16 ROOFTOP TENTS Annex awning

17 DRAWS SYSTEM

18 RECOVERY GEARS

20 LIST OF AVAILABLE MODEL

33 WARRANTY

A Modern fog light design with unique frame insert which incorporates large fog lights and round park and flasher lamp

B Every bar incorporates two CB aerial brakets, welded to the top cross tube. For easy aerial installation

C Winch compatible is standard across the range. Separate winch beds have also been designed to spread winching loads evenly over the vehicle chassis, ensuring the bull bar functions properly in extream circumstances. Winch bed’s available for most models

D Mcc bull bars incorporates Hi-lift jacking points neatly positioned in the center pan sections

E Winch access holes located on top of the center pan area

F Each bull bar upright is cut from a single piece of quality high grade steel that extends from the top tube through the bumper section and forms the mounting plate to the bracket. This ensures the whole outer frame receives the maximum possible support

G Polyurethane overrider for light impact protection

H MCC’s mounting systems are designed to spread impact, ADR approved and air bag compliant.

I The split air pan system - ensures the radiator receives greater airflow and further increases the strength of the bar.

J MCC logo - guarantee of high quality and unique design. All MCC products have been designed using the latest CAD/CAM, utilizing the most modern equip-ment, laser cutters, CNC benders, lathes, welders, and advanced powder coating centers.

FALCON BAR

MCC4X4 BULL BARSBeyond your expectation, it’s our design excellence

A

B

C

D

E

F

G

H

I

J

B

C

H

TOUGH AUSTRALIAN DESIGN

2 MCC 4X4 BULL BARS

MCC 4X4 BULL BARS

ROCKER BARSMCC 078

ADR approved for air bag and

winch compatible

Aerial mounts

Tow points

Hi-lift jacking points

Split air pan system

110 mm. fog lamps

Modern LED round park / Flasher lamps

* Note : Shackles are sold separately.

MCC 078-02 Rocker bar triple loops

** Pictures are for illustration purposes only, Rocker bar comes standard in sand black powder coated.

MCC 4X4 BULL BARS

PHOENIX BARSMCC 808

Premium Phoenix bar designed with LED fog lights / daytime

running lights. Standard model comes with Halogen fog lights.

ADR approved for airbag and winch compatible

Premium model are designed with airflow grill for better ventilation

Upgraded with heavy duty 62 mm diameter upper loop tube

for the ultimate protection

Unique and smooth design for modern look

LED parker / indicator lights

Four aerial mounts and driving lights mounts

Larger over rider protection

Dual hi-lift jacking points

High quality materials, 3 mm thick steel plates

Standard bars finished in black powder coat.

4 MCC 4X4 BULL BARS

MCC 808-02 Steel A - frame

PHOENIX 808-01 PHOENIX 808-02 PHOENIX 808-02

MCC 4X4 BULL BARS

FALCON BARSMCC 707

ADR approved for air bag and winch compatible

125 mm. fog lights

LED paker and indicator lights

Classic Falcon bar with no fog light also available

Dual aerial mounts


Driving lights mounts

Over rider protection

High quality materials, 3 mm. thick steel plate

Standard bars finished in black powder coat

MCC 707-02 Steel A - frame

PHOENIX 808-02 FALCON 707-02 AL FALCON 707-01 FALCON 707-01

MCC 4X4 BULL BARS

CLASSIC BARSMCC 004

ADR approved for air bag & winch compatible

Dual aerial mounts


Driving lights mounts

LED parker and indicator lights

Over rider protection

High quality materials with 3 mm thick steel plates

Standard bars finished in black powder coat

Optional under protection platets available for most models

* Optional 110 mm. fog lamp kits available

6 MCC 4X4 BULL BARS

MCC004-02 Classic bar with optional fog lamp kits

CLASSIC 004-02 CLASSIC 004-02 CLASSIC 004-02

MCC 4X4 BULL BARS

CLASSIC BARSMCC 004

MCC 4X4 ACCESSORIES

NUDGE BARSMCC 009 (H/L)

High quality polished 304 grade stainless steel

Mirror polished

1.5 mm. thickness

Aerial or spot lights mounts

Light weight and strong

ADR compliant and air bag compatible

Available for High/Low nudge bars

CLASSIC 004-02 NUDGE BAR 009L NUDGE BAR 009H

MCC 4X4 REAR PROTECTION

ROCKER REAR BAR Tough Australian design

Rear step with ADR rated tow bar

Two LED number plate lights

Two recevery points

Hi-lift jacking points

Reverse and flasher lamps

Available in high quality sand black powder coated finish

* Note : Bow shackles are sold separately

8 MCC 4X4 REAR BARS

ARD rated and approved tow bar

MCC022-01

MCC 022-01 MCC 022-01


JACK BAR Tough Australian design

Rear step with ADR rated tow bar

Tough rear and side panel protection

Two LED number plate lights

Hi-lift jacking point

High quality black powder coated finish

Two recovery points (Bow shackles are sold

separately)

Premuim Jack Bar : MCC 022-03

Optional add-on features.

- Aluminium step plate

- Reverse lamps

- Park & flasher lamps

MCC022-03

MCC 022-03 MCC 022-03


REAR CARRIERMCC 022-02 bar available in multiple combinations

S ingle wheel carrier

D ual wheel carrier

S ingle jerry can holder / single wheel carrier

D ouble jerry can holder / single wheel carrier

10 MCC 4X4 REAR CARRIER

NOTE : Tow Bar pack for Pick up range 022-02, will be required when fitting the bar as original tow bar has to be removed. If customer wishes to retain a tow bar, SUV’s original tow bar should be able to remain, no additional tow bar packs available for SUV’s.

MCC 022-02 : Dual wheel carrier


MCC 022-02 WHEEL&JERRY CAN HOLDER

A MCC 4x4 carriers can be ordered to suit your need. A standard carrier comes with a single wheel carrier and a jerry can holder. Dual wheel or double jerry can are optional.

B Modern LED light

C Jacking point, two at the rear and another two on the side for easy jack access without removing wheels from carrier.

D Strong stub axles, bearing and arms which can accommodate 35” tyres. (35” tyres side by side is dependent on vehicle)

E Supplied with bearing stub axle rubber covers for added good looks when arms removed.

F User friendly latch mechanism with safety locking pin.

G Self locking pin to hold arms open for easier access to the back of your vehicle.

H Rated and ADR approved tow bar packs available for pick-up / utilities.

I Pre drilled reversing sensor mounts. Rubber caps provided when not in use.

J All models have a quality powder coated finish and aluminium checker plate non slip step.

K The MCC logo, the guarantee of high quality and uniquely designed products. All MCC4x4 Products are manufactured using the lastest CAD/CAM technology. We are also utilize the most modern equipment and machinery during the manufacturing process.

MCC 4X4 ACCESSORIES

ROLL BAR AND SIDE PROTECTION

12 MCC 4X4 ROLL BAR & SIDE PROTECTION

MCC SWING ROLL BAR 032-05

MCC SWING ROLL BAR

Choice of high quality polished 304 grade stainless steel

or steel with black power coat finish

Aerial / spot light mounts

Thickness: 1.5 mm for stainless steel / 2.0 mm for steel

Commercial design

* Roof rack are sold separately.

MCC SIDE STEPS AND SIDE RAILS

Steel construction

Side and sill protection

Non slip aluminium checker plate steps

Side rails optional for panel protection

Removable end caps for side steps, allowing for addition

of optional side rails.

Black power coated finish

2 mm thickness / 50.8 mm diamater steel pipe

Noted: To be ADR compliant swivel clamp assembly must be fitted for side

airbag compatibility. For off road use only we also supply standards rail clamps.

Swivel kit

CLASSIC SPORT BAR 032-03

SIDE RAILS 030-09SR

SIDE RAILS 030-09SR

MCC 030-09MCC 030-09TWSR - PREMIUM DESIGN

MCC SWING ROLL BAR 032-05

MCC STANDARD RACK

Steel construction

Powder coated

Four wall design

Wheel carrier

Tie down points

Black powder coated finish

Sizes available :

150 x 125 cm.

185 x 125 cm.

220 x 125 cm.

MCC COMMERCIAL RACK

Steel construction

Powder coated

Commercial design

Wheel carrier

Tie down points


Sizes available :

150 x 125 cm.

185 x 125 cm.

220 x 125 cm.

14 MCC 4X4 ROOF RACKS

Sizes available :

150 x 125 cm.

185 x 125 cm.

220 x 125 cm.

MCC ROOF TOP TENT RACK

Steel construction

Powder coated

Roof top tent design

Wheel carrier

Tie down points


Sizes available :

150 x 125 cm.

185 x 125 cm.

220 x 125 cm.

New adjustable gutter mounting bracketsAvailable in :

12.5 - 16 cm.

20 - 23.5 cm.

Spare wheel mountingStandard on size 185 x 220 cm. only.

Cargo net hooksFor securing your items while traveling.

MCC 4X4 ACCESSORIES

ROOF RACKS

Quick & easy to set up, manufac-tured from high quality, 300 gsm poly / cotton ripstop canvas which is breathable

Weight approximately 65 kgs. Dimension : Open 1400 x 3100 x 1300mm / Closed 1450 x 1250 x 300 mm

Waterproof and mould resistant

Raised on aluminium rods and incorporates nylon flysheet.

Also comes with a sturdy, aluminium retractable ladder; 205cm long

Comfortable 50mm high density foam mattress with removable cover 240 cm x140cm / 900 gsm UV stablilised laminated PVC

Incorporates a pull out veranda and zip on annex

Insect screened windows and doors

Bungee cord system to assist with closing

Insulated aluminium formed and clad base reduces weight and helps prevent cold seeping through the floor

Enhanced mounting system – no need to drill into roof rack or bars which simple to install and remove when not in use

Comes complete with mounting hardware, wrenches, ladder, travel cover and comprehensive instructions

Aluminium filled with polyurethane

Double stitched seams edged with binding

3 mm stainless steel hinges and 4 mm electro galvanised spring steel flysheet poles

Heavy duty, UV stabilised PVC travel cover with welded seams for complete waterproofing

Travel cover tie down straps to minimize ballooning

16 MCC 4X4 ROOFTOP TENT & DRAWER SYSTEM

MCC 4X4 ACCESSORIES

ROOFTOP TENT

MCC 4X4 ACCESSORIES

DRAWER SYSTEMS

SMALL

LARGE

MCC FRIDGE SLIDE

High quality made fridge slide Strong design Black powder coated Heavy duty rollers High quality steel components Locks into place when full open Comes with mounting bolts Has two heavy tie down points front and back Easy to use release mechanism on the front

SMALL : Suite fridge up to 635 x 390 mm Outside diameter 660 x 460 x 60mm Inside diameter 635 x 390 x 40mm Full extended length from 660 to 1230mm

LARGE : Suite fridge upto 850 x 510 mm Outside diameter 870 x 580 x 60mm Inside diameter 850 x 510 x 40mm Full extended length from 870 to 1490mm

MCC 044-02 1.5 Galvanised steel frame construction

Stainless handle with lockable

and safe storage system

100 kgs. rating per drawer set

Over 90 bearing used in construction

Heavy duty marine grade carpet

Fridge slide are sold separately

Heavy duty solenoid

Remote control

Snatch block 4 ton

Damper blanket

Hawse fairlead

9500 Ibs.12000 Ibs.

SYNTHETIC ROPE WINCHES Heavy duty solenoid

Remote control

Snatch block 4 ton

Damper blanket

Roller 4way fairlead

9500 Ibs.12000 Ibs.

CABLE WINCHES

122 cm x 34 cm x 8 cm size

One set of 2 units

Carry bar

Folding shovel

AIR COMPRESSOR 90 AIR COMPRESSOR 160 SUBTRACTS Maximum working pressure 100 psi

Maximum flow rate 90 litres/mins,

Continuous use 40 minutes

Carry bag

Maximum working pressure 150 psi

Maximum flow rate 160 litres/mins

Continuous use 40 minutes

Carry bag

18 MCC 4X4 RECOVERY GEARS

Maximum 3 ton load

Simply to use. Ideal for 4WD, farm

use, lifting, pulling or winching

Comply with Australian safety

standards

Tested capacity 3000 kg

Lifting capacity 1050 kg

Available in 48” & 60” height

HI-LIFT JACKS

SUBTRACTS

Maximum 4 ton load

Complete kit including,

two protective mate

A pair works gloves

Carry bag

Simple to use without the

risk of damage to vehicle

9 m x 8000 Kg snatch strap

4 ton snatch block

2 x bow shackie 5/8”

Hitch receiver

Leather gloves

Carry bag

Land cruiser 200 series


Land cruiser 100, 105




Nissan GU Y60

Nissan GU Y61

Hilux Vigo

Mitsubishi triton

Nissan Navara

Ford Ranger

Isuzu D-Max

20 m x 5000 kg for winch extention

3 m x 12000 kg tree trunk protector

9 m x 8000 kg snatch

8 ton snatch block

2 x bow shackle 3/4”

1 x bow shackle 5/8”

4 ton snatch block

5 m x 8 mm high tensile chain

Leather glove

Heavy duty carry bag

SNOCKEL AIR JACKS RECOVERY KITS (LARGE) RECOVERY KIT (SMALL)

MCC 4X4 ACCESSORIES

RECOVERY GEARS

20 MCC 4X4 CATALOGUE

MCC ROCKER BAR : 078-02 Triple loops in black steel

MCC ROCKER BAR : 078-01 Optional single loop in stainless steel or black steel

MCC CLASSIC BAR : 004 - 02 Optional add on fog lamp kit 110 mm.

MCC ROCKER BAR : 078-01 MCC FALCON BAR : 707-01Optional single loop in stainless steel or black steel

Classic bar Falcon bar Rocker bar Phoenix bar

MCC FALCON BAR : 707-02Classic Falcon bar with no fog light

MCC PHOENIX BAR : 808-02Top model : Steel A - frame with LED fog lights

MCC PHOENIX BAR : 808-01Optional single loop in stainless steel or black steel

MCC PHOENIX BAR : 808-02Standard model : Steel A - frame

MCC PHOENIX BAR : 808-01Stainless steel triple loop

MCC FALCON BAR : 707-02Steel A - frame

MCC FALCON BAR : 707-01Stainless steel triple loops

LIST OF AVAILABLE FRONT PROTECTION ACCESSORIES

22 MCC 4X4 CATALOGUE

MCC REAR ROCKER BAR : 022-01Comes with ADR rated tow bar pack

MCC JACK REAR BAR : 022-03 OPTION : Non-slip aluminium step plate

Reverse lampsPark & flasher lamps

MCC REAR BAR : 022-02Dual wheel

MCC SPORT BAR : 032-03MCC SWING SPORT BAR : 032-05

OPTION : Color coated (Standard comes in steel black powder coated)

MCC SIDE STEPS Standard model : 030-09 (Non-twist tube) Premium model : 030-09TW (Twist tube)

MCC SIDE RAILS : 030-09SR

NOTE : ADR compliant swivel clamp assembly must be fitted for side airbag compatibility.

MCC NUDGE BAR : 009LLow nudge bar (high nudge bar optional (009H)

Standard

Premium

MCC REAR BAR : 022-02Rear bar only

MCC REAR BAR : 022-02Single wheel

MCC REAR BAR : 022-02Dual wheel

MCC REAR BAR : 022-02Single jerry can holder / single wheel

MCC REAR BAR : 022-02Double jerry can holder / single wheel

LIST OF AVAILABLE SIDE & REAR PROTECTION ACCESSORIES

24 MCC 4X4 LIST OF AVAILABLE MODELS

Table 1

MODELBULL BARS ALLOY

004-02 007-02 707-01 707-02 078-01/02 808-01/02 707-02 AL/ALW

Toyota Hilux 88-97 (LN105-106)

Toyota Hilux 97-04

Toyota Hilux 05-11

Toyota Hilux 2012 - 2015

Toyota Hilux 2015 ON

Toyota Surf (4 Runner)130

Toyota Surf (4 Runner) IFS. Coil Spring 185

Toyota Land cruiser 60 Series


Toyota Land cruiser 105 Live axle 98-02

Toyota Land cruiser 100 IFS 02-07

Toyota Land cruiser 200 2008 - 2015

Toyota Land cruiser 200 2016 ON

Toyota Land Prado 90 / 95

Toyota Land Prado 120


Toyota Land cruiser 75 / 78 / 79 1994 ON

Toyota Land cruiser 70 Series 2007 ON


Toyota FJ Cruiser 07 ON

Mitsubishi Triton L200 MK/ Challenger PA 98-06

Mitsubishi Triton 2006 ML

Mitsubishi Triton 2010-2015 MN/ Challenger PB 09 ON

Mitsubishi Triton 2015 Pajero Sport 2015 - ON

Mitsubishi Triton MQ 2015 - ON

Mitsubishi Pajero NA - NG 83-91

Mitsubishi Pajero NH - NL 92-99

1


004-02 007-02 707-01 707-02 078-01/02 808-01/02 707-02 AL/ALW

Mitsubishi Pajero NM - NP 00-05

Mitsubishi Pajero NS - NW 2006 ON

Nissan Patrol GQ 88-97 Y60

Nissan Patrol GU 98-04 (Series 1-3) Y61

Nissan Patrol GU 05-ON (Series 4) Y61

Nissan Patrol GU 2010 ON Y61

Nissan Navara D22 Long Bed

Nissan Navara D40 05-10/ Pathfinder R51

Nissan Navara D40/11 Africa-Spain ST-X

Nissan Navara D40/11 ST-X 550, Pathfinder 550

Nissan Navara NP 300 2015 ON

Nissan Pathfinder R50

VW Amarok

Mazda Bravo 04-06

Mazda BT-50 (06-11)

Mazda BT-50 2012

Ford Courier PG 04-06

Ford Ranger PJ 07-09

Ford Ranger PK 09-11

Ford Ranger PX 2012 ON

Ford Ranger Mark II 2015 ON

Holden Colorado RC 2008

Holden Colorado RG 2012 ON

Holden Colorado 7 2012 ON

Holden Jackaroo U8 2000

Holden Colorado TF/KB 88-03

Holden Rodeo / D-Max 03-07 RA

2


004-02 007-02 707-01 707-02 078-01/02 808-01/02 707-02 AL/ALW

Holden Rodeo / D-Max 08-11 RA7 ON

Isuzu D-Max 2012 - 2015 ON

Isuzu D-Max MU-X 2012 ON

Isuzu D-Max 2016 ON

Jeep Cherokee XJ 1994


Jeep Grand Cherokee WJ 1999 ON

Jeep Wrangler TJ 97-06 ** **

Jeep Wrangler JK 2007 ON ** **

Land Rover Discovery I

Land Rover Discovery II

Land Rover 90, 110, 130, Defender ** **

Great Wall V200 Pick-up

Great Wall V240 Pick-up 2011

JMC 2015 - ON

** Vehicle Specific Bar Style

NOTE :A) All bull bars are design to fit flared and non-flared vehicles.B) All 707-01 come with standard with triple loop. Single loop option sold separately. 808-01/02C) All bars are winch compatible, for Great Wall V200 Diesel If require winch, intercooler will require relocate.

3


Table 1-1

MODELNUDGE BARS REAR BARS SPORT BARS

009 L 009 H 022-01 022-02 022-03 032-03 032-05


Toyota Hilux 97-04

Toyota Hilux 05-11

Toyota Hilux 2012

Toyota Suft (4 Runner) IFS, Coil Spring





Toyota Land cruiser 200

Toyota Land cruiser Prado 90 / 95

Toyota Land cruiser Prado 120

Toyota Land cruiser Prado 150




Toyota Land Cruiser 79 Pick-up


Mitsubishi Triton L200 MK

Mitsubishi Triton 2006 - 2009 ML

Mitsubishi Triton 2010 - ON MN

Mitsubishi Pajero Sport 2015 ON





5


004-02 007-02 707-01 707-02 078-01/02 808-01/02 707-02 AL/ALW


Isuzu D-Max 2012 - 2015 ON

Isuzu D-Max MU-X 2012 ON

Isuzu D-Max 2016 ON




Jeep Wrangler TJ 97-06 ** **

Jeep Wrangler JK 2007 ON ** **



Land Rover 90, 110, 130, Defender ** **



JMC 2015 - ON

** Vehicle Specific Bar Style

NOTE :A) All bull bars are design to fit flared and non-flared vehicles.B) All 707-01 come with standard with triple loop. Single loop option sold separately. 808-01/02C) All bars are winch compatible, for Great Wall V200 Diesel If require winch, intercooler will require relocate.

3


009 L 009 H 022-01 022-02 022-03 032-03 032-05





Nissan Navara D40 05-10


Nissan Navara D40/11 ST-X 550

Nissan Navara NP 300 2015 - ON


VW Amarok

Mazda Bravo 04-06

Mazda BT-50 (06-11)

Mazda BT-50 2012











Isuzu D-Max 2012 - 2015


6



009 L 009 H 022-01 022-02 022-03 032-03 032-05



Jeep Wrangler TJ 97-06

Jeep Wrangler JK 2007 ON



Land Rover 90, 110, 130, Defender



JMC

* This product is underdevelopment, please contact for availability.

7


009 L 009 H 022-01 022-02 022-03 032-03 032-05










VW Amarok

Mazda Bravo 04-06

Mazda BT-50 (06-11)

Mazda BT-50 2012











Isuzu D-Max 2012 - 2015


6

MODEL

SIDE STEPS ROOF RACK DRAWER SYSTEMS

DOUBLE CAB031-05 044-01 044-02

030-09 030-09SR 030-09TW 030-09TWSR


Toyota Hilux 97-04

Toyota Hilux 05-11

Toyota Hilux 2012 - 2015

Toyota Hilux 2015 ON

Toyota Suft (4 Runner) IFS, Coil Spring





Toyota Land cruiser 200 2008 - 2015

9

MODEL


DOUBLE CAB031-05 044-01 044-02

030-09 030-09SR 030-09TW 030-09TWSR



Toyota Land Prado 90 / 95 * * * *









Mitsubishi Triton 2010 MN









Nissan Navara D22 Long / Short Bed





10


MODEL


DOUBLE CAB031-05 044-01 044-02

030-09 030-09SR 030-09TW 030-09TWSR


VW Amarok

Mazda Bravo 04-06

Mazda BT-50 (06-11)

Mazda BT-50 2012





Ford Ranger Mark II 2015 ON







Isuzu D-Max 2012

Isuzu D-Max 2016 - ON




Jeep Wrangler TJ 97-06

Jeep Wrangler JK 2007 ON

Land Rover Discovery I ** ** ** **

Land Rover Discovery II ** ** ** **

11

MODEL


DOUBLE CAB031-05 044-01 044-02

030-09 030-09SR 030-09TW 030-09TWSR



Toyota Land Prado 90 / 95 * * * *









Mitsubishi Triton 2010 MN









Nissan Navara D22 Long / Short Bed





10

MODEL


DOUBLE CAB031-05 044-01 044-02

030-09 030-09SR 030-09TW 030-09TWSR

Land Rover 90, 110, 130, Defender ** ** ** ** **



JMC 2015 - ON

* This product is underdevelopment, please contact for availability. ** Vehicle Specific Bar Style

NOTE :D) All side steps and rails design for vehicle with flared wheel arches,

E) Information contained in this catalogue is based on manufacturers’ specifications at the time of print. Changes to vehicles or products may occur after this time that may render a certain accessory unsuitable for a particular application.

F) Vehicle model dates contained in this catalogue are indicative, so please exercise caution when ordering accessories if your vehicle’s build date falls close to a model change date. If in doubt, please consult with our staff, who can assist with determining the correct product for a particular vehicle.

12

FOLLOW USFor more up to date products and events from us in social network.

www.facebook.com/MCC4X4accessories

@ MCC4X4


B E Y O N D E X P E C TAT I O N

WARRANTYMCC 4x4 products come with 1 year warranty. MCC 4x4 warrants the original buyer, only when purchased new via authorized MCC 4x4 resellers and dis-tributors, from date of original retail sale.

Product is warranted against defects in material or workmanship that cause the product to perform below the specified limits set by MCC4x4, to the extent that MCC 4x4 will repair or replace any parts which are found to be defective.

All warranty claims must be submitted via original purchasing store or chain, unless otherwise arranged. Proof of original purchase must be presented upon request.

Products may require to be returned to MCC 4x4 for assessment or repair. Postage and removal costs involved are not the responsibility of MCC 4x4, and may only be considered upon discretion by MCC 4x4 in the event of such claim being verified.

The warrant does NOT apply where, 1) Acts of neglect or misuse are evident, 2) Product has been modified, 3) Vehicles which are modified or not the recommended vehicle of use, 4) Used in racing or competition conditions without the prior consent of MCC 4x4, 5) used beyond the expectations of the original vehicle manufacturer.

Before installation of any product, please ensure you have received the cor-rect parts for your application. Ordering of the correct parts is the responsibil-ity of the buyer. Return of a product in an un-used condition will attract a 20% restock fee, where MCC 4x4 is not at fault.

Return of used or soiled product, 1) outside warranty period, 2) without fault, will result in refusal of your claim and be returned at buyer’s expense.

Damage to products through fitment error is not covered under warranty.

FREIGHT CONDITIONS:Freight of all products is the buyer’s responsibility. Where MCC 4x4 have arranged freight, costs involved will be invoiced to the buyer.MCC 4x4 is not responsible for damage or loss during freight.

FITTING:Any prices quoted may be subject to fitting costs. The price of fitting is deter-mined by the individual fitting agent.

ABOUT MCC4X4 · changing landscape and demanding on and off road conditions. ... SUV’s original...

Documents

Transcript of ABOUT MCC4X4 · changing landscape and demanding on and off road conditions. ... SUV’s original...