ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE...
-
Upload
bryan-parks -
Category
Documents
-
view
241 -
download
1
Transcript of ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE...
![Page 1: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/1.jpg)
ABDALLAH ALHARABAH
![Page 2: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/2.jpg)
INTRODUCTION
![Page 3: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/3.jpg)
Problem Statement Problem Statement
This term's problem is to design an MTBE plant that produces 2000 tons MTBE per day.
INTRODUCTION
MTBE is a gasoline additive used to increase octane number that is produced from methanol and isobutylene. MTBE is produced by a liquid-phase reaction over a catalyst. The reaction is between isobutene and methanol as follows:
(CH3)2C=CH2 + CH3OH (CH3)3C-O-CH3
![Page 4: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/4.jpg)
Problem Statement Problem Statement
INTRODUCTION
The isobutene and propane are inert. The conversion is 95% and the selectivity is one.
The reactor30 bar and 90 °C
,Pure Methanol
Mixture :-40% isobutylene-55% isobutane-5% propane
MTBE 2000 ton/day
![Page 5: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/5.jpg)
![Page 6: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/6.jpg)
INTRODUCTION
MTBE SYNTHSIS - Raw Material - Properties and Thermodynamics
MTBE PROCESSES - Process Description - Process Flow Diagram (PFD) - Uses and Alternatives - Safety
Outlines
![Page 7: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/7.jpg)
INTRODUCTION
MTBE is a chemical compound with molecular formula C5H12O.
It has been used since 1979 when it was first added to gasoline to replace lead as an anti-knock agent and to boost octane. MTBE oxygenate has achieved a great economic importance in recent years as a gasoline additive because of its ability to enhance the octane value of unleaded motor gasoline while increasing the oxygen content.
MTBE is produced by the reaction of isobutylene and methanol in the presence of a cation exchange resin catalyst Amberlyst 15.
known as methyl tertiary butyl ether
![Page 8: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/8.jpg)
MTBE is also used in organic chemistry as a relatively inexpensive solvent with properties comparable to diethyl ether but with a higher boiling point and lower solubility in water.
It is also used medically to dissolve gallstones.
INTRODUCTIONknown as methyl tertiary butyl ether
![Page 9: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/9.jpg)
Raw Material
![Page 10: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/10.jpg)
RAW MATERIALknown as methyl alcohol
its molecular formula is CH3OH.
Methanol was formerly produced by the destructive distillation of wood.
The modern method of preparing methanol is based on the direct combination of carbon monoxide gas and hydrogen in the presence of a catalyst.
Most methanol is produced from the methane which is found in natural gas.
![Page 11: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/11.jpg)
RAW MATERIALknown as methyl alcohol
Pure methanol is an important material in chemical synthesis.
Methanol is a colorless liquid, completely miscible with water and organic solvents and is very hydroscopic. It boils at 64.96° C (148.93° F) and solidifies at -93.9° C (-137° F).
It forms explosive mixtures with air and burns with a nonluminous flame. It is a violent poison; drinking mixtures containing methanol has caused many cases of blindness or death. Methanol has a settled odor.
![Page 12: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/12.jpg)
RAW MATERIALknown as 2-methylpropene with a formula C4H8
It is called olefin because it contains a four-carbon branched alkene.
It is colarless gas and on of the important hydrocarbon in industrial.
Isobutylene is used as an intermediate in the production of a variety of products.
It is reacted with methanol and ethanol in the manufacture of the gasoline oxygenates methyl tert-butyl ether (MTBE) and ethyl tert-butyl ether (ETBE), respectively. Alkylation with butane produces isooctane, another fuel additive.
![Page 13: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/13.jpg)
RAW MATERIALIt is molecular formula C3H8
Propane is a colorless, flammable gas at atmospheric pressure and normal temperatures.
It has a natural gas odor and is soluble in ether, alcohol and slightly soluble in water.
Typical uses include vehicle fuel, home heating, and refrigerant gas.
![Page 14: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/14.jpg)
Properties and Thermodynamics
![Page 15: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/15.jpg)
Properties and Thermodynamics
known as methyl tertiary butyl ether
MTBE properties
Molecular weight (g/mole) 88.15
Boiling Temperature ( °C) 54
Specific gravity 0.74
Water solubility (mg/L) 50000
Vapor pressure (mm Hg) 251
Henry's Law 1.5E-3
Latent heat of vaporization (Cal/g) 81.7
Specific heat (Cal/g.°C) 0.51
![Page 16: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/16.jpg)
Properties and Thermodynamics
known as methyl alcohol with a formula CH3OH
![Page 17: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/17.jpg)
Methanol propertiesMolecular weight (g/mole) 32.04
Boiling Temperature (°C ) 65
Melting pint (°C ) -97.7Relative Density 0.79Specific gravity 0.8Water solubility (mg/L) infinityVapor pressure (mm Hg) 122Heat of Formation (MJ/kmol) 201.3-
Gibbs Free Energy -162.62Tc (K) 512.6Pc (bar) 81Vc ( m³/kmol) 0.118Density ( kg/m³) 791Heat of Vaporization (kJ/kmol) 35278
Henry's Law 1.1E-4
Properties and Thermodynamics
known as methyl alcohol with a formula CH3OH
![Page 18: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/18.jpg)
Butenes properties isobutylene 1-butene
Molecular weight (g/mole) 56.11 56.107Boiling Temperature (°C ) -6.9 -6.3
Melting pint (°C ) -140.3 -185.4Specific gravity 0.59 1.998Water solubility (mg/ml) insoluble 0.085Vapor pressure ( kPa) 268.8 268Flash point (°c) -76 -79
Tc (°c) -144.7 146.4
Pc (atm) 39.48 40.2
Vc ( cm³/mol) 239 -
Density ( g/cm³) gas 0.5879 2.72(kg/m³)
Latent Heat of Vaporization (cal/g)
94.3 390 (kj/kg)
Specific heat (kj/kg.k) 1.487 0.083 (kj/mol.k)
Properties and Thermodynamics
![Page 19: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/19.jpg)
It is molecular formula C3H8
Properties and Thermodynamics
Propane propertiesMolecular weight (g/mole) 44.1Boiling Temperature (°C ) -42.09
Melting pint (°C ) -187.6Specific gravity 1.5503Water solubility (mg/ml) 0.07Vapor pressure (psig) 109Viscosity (centipoise) 0.008029Gibbs Free Energy -162.62Tc (°F) 206.2Pc (psia) 617.4Density ( kg/m³) gas 1.83 Density ( kg/m³) liquid 507.7Heat of Vaporization (cal/g) 101.76Specific heat (cal/g.°c) 0.3885
![Page 20: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/20.jpg)
Process Description
![Page 21: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/21.jpg)
Process Description
(MTBE) is a gasoline additive used to increase octane number that is produced from methanol and isobutylene.
Methanol is purchased but the isobutylene is obtained from the isomerization and dehydrogenation of butane .
Methanol
Butenes
Water
MTBE
M
eth
anol R
ecy
cle
Colu
mn
MTB
E C
olu
mn
MTBE Reacto
r
MethanolScrubber
Waste stream
Butene waste stream
![Page 22: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/22.jpg)
Process Description
The Butenes stream contains 40% isobutylene, 55% isobutene and and 5% light gases mainly propane
Methanol
Butenes
Water
MTBE
M
eth
anol R
ecy
cle
Colu
mn
MTB
E C
olu
mn
MTBE Reacto
r
MethanolScrubber
Waste stream
Butene waste stream
![Page 23: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/23.jpg)
Process Description
The MTBE produced is extracted from the reaction effluent via distillation, while the unreacted methanol is absorbed by water before it is separated from water via distillation. The recoverd methanol is recycled back to the reactor.
Methanol
Butenes
Water
MTBE
M
eth
anol R
ecy
cle
Colu
mn
MTB
E C
olu
mn
MTBE Reacto
r
MethanolScrubber
Waste stream
Butene waste stream
![Page 24: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/24.jpg)
Process Description
MTBE is produced by a liquid-phase reaction over a catalyst. The reaction is between isobutylene and methanol as follows:
(CH3)2C=CH2 + CH3OH (CH3)3C-O-CH3
Methanol
Butenes
Water
MTBE
M
eth
anol R
ecy
cle
Colu
mn
MTB
E C
olu
mn
MTBE Reacto
r
MethanolScrubber
Waste stream
Butene waste stream
![Page 25: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/25.jpg)
Process Flow Diagram (PFD)
![Page 26: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/26.jpg)
1
5
3
4
8
11
6
7
1 0
1 2
9
2
processwater
m ethanol
butenes
R-901
T-902
T-903
T-901
butenewaste stream
wastewater
M TB E
Figure 1 : P rocess F low D iagram for M TBE P roduction
R-901MTBEReactor
T-901MTBEColumn
T-902MethanolScrubber
T-903MethanolRecycleColumn
Process Flow Diagram
![Page 27: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/27.jpg)
Process Flow Diagram
![Page 28: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/28.jpg)
Kinetic Data and Uses
![Page 29: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/29.jpg)
Process Flow Diagram
The catalyst used in this reaction is Amberlyst 15.
A kinetic model for the liquid phase reaction using Amberlyst 15 as a catalyst is
![Page 30: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/30.jpg)
MTBE has many properties that make it a good gasoline component for technical and environmental reasons: • MTBE can be used as fuel that can supplement the supply of gasoline components.
• Its high octane rating makes it an ideal substitute for other octane components, e.g. lead.
• It is an oxygenate, which can be used in the formulation of cleaner-burning gasoline.
Uses
![Page 31: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/31.jpg)
Safety
![Page 32: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/32.jpg)
Safety is very important in the plant because any small mistakes will cost money. For example:
in reactor we should have a jacket or coil to cool the reactor because the reaction is exothermic and isothermal. If we don't have cooler the reaction temperature with time will increase and that will lead to break the catalyst and explosion.
Also in the distillation column limit the maximum height to 53 m because of wind load and foundation considerations
Safety
![Page 33: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/33.jpg)
Also we need to use spare pump because if the primary pump is not working we don't have problem.
Moreover we need to use PID tuning to control the process conditions like temperature and pressure.
Also some safety factors will required in the design's calculation to avoid problems.
Safety
![Page 34: ABDALLAH ALHARABAH. INTRODUCTION The purpose MTBE PLANT, PRODUCTION MASS AND ENARGY BALANCE EQUIPMENT DESIGN, SIZING ECONOMICS ANALYSIS.](https://reader035.fdocuments.in/reader035/viewer/2022062308/56649edd5503460f94bee44d/html5/thumbnails/34.jpg)
???