A

5
A Major project Report On Wireless Robot with IP Submitted in partial fulfillment of the requirement for the award of the degree of BACHELOR OF TECHNOLOGY In ELECTRONICS & COMMUNICATION ENGINEERING Submitted by Jawed Akhter 117B1A0455 Under the guidance of Asst.Prof. Ms.Alavelu

Transcript of A

Page 1: A

A

Major project Report

On

Wireless Robot with IP

Submitted in partial fulfillment of the requirement for the award of the degree of

BACHELOR OF TECHNOLOGY

In

ELECTRONICS & COMMUNICATION ENGINEERING

Submitted by

Jawed Akhter 117B1A0455

Under the guidance of

Asst.Prof. Ms.Alavelu

Page 2: A

Certificate

This is to certify that this dissertation work entitled “Wireless Robot With IP” is a Bonafide work carried out by Jawed Akhter (117B1A0455) in partial fulfillment of the requirements for the award of the degree of Bachelor of Technology in ELECTRONICS AND COMMUNICATION ENGINEERING, from “Sagar Institute of Technology”, during the period 2014 under the guidance and supervision.

Internal Guide Head of the Department

Asst.Prof. Ms.Alavelu Mr. K.Srishylam

M.Tech,MISTE,AMIE,AMIETE

.

Page 3: A

DECLARATION

We hereby declare that the project “Wireless Robot With IP” submitted in the partial fulfilment

of that requirements for the award of the degree of bachelor of technology in electronics and

communication engineering from SAGAR INSTITUTE OF ENGINEERING AND

TECHNOLOGY, CHEVELLA, affiliated to JNTU, Hyderabad is an authentic work and has not

been submitted to any other university/institute for award of degree.

Jawed Akhter 117B1A0455

Department of E.C.E

Sagar Institute of Technology.

Date:

Place: Signature

Page 4: A

ACKNOWLEDGEMENT

With great pleasure we want to take this opportunity to express our heartfelt gratitude to all the people who helped in making this mini project work a grand success.

We are grateful to Mr. K.Srishylam (M.Tech,MISTE,AMIE,AMIETE) . Professor & Head of Electronics and Communication Engineering department, SITECH. And Ms Alavelu, Project Assistant, for their valuable suggestions and guidance during the execution of this project and also for giving us moral support throughout the period of our study in SITECH.

We are also highly indebted to our principal Dr.P.V.K Murthy , for giving us the permission to carry out this mini project.

We would like to thank the teaching and non-teaching staff of ECE Department for sharing their knowledge with us.

Last but not the least we express our sincere thanks to Dr.W.R.Reddy and all the founders of Sagar Institute of Technology for their continuous care towards our achievements.