A ULTRABOND NG 365CC Cracked Concreteability to resist creep at elevated temperatures. ULTRABOND...
Transcript of A ULTRABOND NG 365CC Cracked Concreteability to resist creep at elevated temperatures. ULTRABOND...
ULTRABOND ® 365CCCracked ConcreteCode Compliant
ULTRABOND® 365CCCracked ConcreteCode Compliant
www.atcepoxy.com 1.800.892.1880
All Season HybridAnchoring Adhesive
AN
CHORING
D
OWELING
AN
CHORING
D
OWELING
Working Time
Full Cure Time
°F °C
862 min 30 30 min
684 min 20 45 min
560 min -15 36 hrs
GENERAL USES & APPLICATIONS
• Structural steel anchoring columns, beams, trusses, racking, rails & barriers
• Retro-fitting and bracing reinforced concrete buildings subjected to earthquake displacement to resist deformation and wind resistant to resist elastic forces
• Threaded rod and reinforcing bar (rebar) into cracked or uncracked concrete
• Vertical down, horizontal, upwardly inclined and overhead installations
• All-season hybrid anchoring system for dry and water saturated concrete conditions
• Service temperature range under short term loading conditions between 5 °F to 302 °F (-15 °C to 150 °C)
ADVANTAGES & FEATURES
• ICC-ES ESR-3770 evaluation report for cracked and uncracked concrete
• Florida Building Code (FBC) Compliant: 2014 and 2010
• Certified - Drinking Water System Components (NSF/ANSI 61) Joining and Sealing
• Resists static, wind and earthquake loading in tension and shear (IBC Seismic Design Categories A - F)
• Full cure in 45 minutes @ 77 °F (25 °C)
• Resists sustained loads up to 194 °F (90 °C)
• Withstands freeze-thaw conditions
ESR-3770
020406080
100120140160180200
Tem
pera
ture
(°F)
Approved Long Term Load (Creep) Resistance
Approved Temperature Range
Competitive Advantages
Gradual, permanent deformation produced by a continued application of heat or stress.
One of the measures of a superior adhesive anchoring product is its ability to resist creep at elevated temperatures. ULTRABOND 365CC is approved at one of the highest temperatures available in the market today.
Creep
Approved Temperature RangeThe widest limits of temperature in which the product is approved for use, between the minimum install temperature and the maximum short term loading temperature.
The wider the range of approved temperatures, the more installation and in-service versatility is provided to the contractor. For ULTRABOND 365CC, one product exceeds what most try to achieve with two separate adhesives.
Hilti is a registered trademark of Hilti Aktiengesellschaft Corporation | Simpson, SET-XP & AT-XP are registered trademarks of Simpson Strong-Tie Company, Inc. | ITW Red Head is a registered trademark, and A7+ is a trademark of Illinois Tool Works, Inc. | Powers, AC100+ Gold is a registered trademark, Pure110+ is a trademark, and DeWalt is a trademark, of Stanley Black & Decker
www.atcepoxy.com 1.800.892.1880Rev 032019T4.0
Data Sources for Illustrated Graphs: ESR-3770, Reissued April 2017 | ESR-3187, Revised November 2016 | ESR-2582, Reissued February 2017 | ESR-3298, Reissued July 2017 | ESR-3814, Corrected May 2017 | ER-263, Revised September 2016 | ESR-2508, Reissued July 2017 | ESR-3903, Revised July 2017 |
ESR-3577, Revised August 2016
5 55 105 155 205 255 305
Pure 110+
AC100+ Gold
C6+
A7+
SET-XP
AT-XP
RE 500 V3
HY 200R
365CC
Temperature (°F)
APPROVED TEMPERATURE RANGE
Bond vs. Steel Strength
0
5,000
10,000
15,000
20,000
25,000
30,000
35,000
40,000
45,000
3/8 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4
365CC Bond vs. Steel StrengthGrade 36 Threaded Rod, 10d Embedment Depth
Steel Strength
Bond Strength
Bond vs. Steel Strength (Grade 36 Threaded Rod), Uncracked Concrete, Dry Installation, No Seismic Loading, No Edge or Spacing Reductions,
Single Anchor, 110 °F Long Term, 176 °F Short Term
Grade 36 Threaded Rod, 10d Embedment Depth
Str
engt
h (lb
s)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
3 4 5 6
365CC Bond vs. Steel StrengthGrade 40 Rebar, 16d Embedment Depth
Steel Strength
Bond Strength
Bond vs. Steel Strength (Grade 40 Rebar), Uncracked Concrete, Dry Installation, No Seismic Loading, No Edge or Spacing Reductions,
Single Anchor, 110 °F Long Term, 176 °F Short Term
Grade 40 Rebar, 16d Embedment Depth
Str
engt
h (lb
s)
RebarThreaded Rod
302
For complete product information, please refer to the product TDS at www.atcepoxy.com.