A Access Area Light OutdoorMar 02, 2020 · AS11-50-T3 110W 114.5 132 15,181 135 15,412 AS15-50-T3...

Multiple brackets are available for customizable mounting, improving installation time and reducing blind area of visual field. Slipfitter, arm mount, trunnion and yoke are available for the Access. See mounting accessories on accessory specsheet.

110W, 150W, and 320W models are available, with custom orders up to 1500W upon request. System efficacy is rated up to 170 lm/W and lifespan at greater than 50,000 hours. The fixture has the standard input of 100-240/277VAC.

ConstructionThe Access Area Light is precision manufactured from Die-cast aluminum. The luminaire comes with a built-in occupancy sensor, following Title 24 standards.

With high efficacy and precision-engineered polycarbonate lenses, the Access Area Light ensures the most energy saved with a wider smoother, and more uniform light output. The lower glare of the Access will be sure to offer improved visual comfort in parking lots and university campuses.

Application

• IP65 rated and tested for use in wet locations• Convenient modular design and knockout• High-transmittance, prismatic acrylic lens

Features

Electrical

Luminaire Access Area Light Type

Project

Product

Notes

OpticsThe Access is available in type lll beam angles with type ll and V available upon request. Color accuracy is rated at 70+ CRI, in a color temperature of 4000K and 5000K.

Certifications• DLC Premium• UL Listed• CE• RoHS• Title 24• IP65 rated

Order Format

Sample: AS11-50-T3

Series Wattage CCT Voltage Dimming Optic Finish Color

AS=Access Area Light11=110W15=150W30=300W

- 40=4000K50=5000K - Blank=100-277V

-V=347-480V - Blank=1-10V DimmingND=Non-Dimming - T3= Type III Blank=Black

Input Voltage (VAC) 100-240/277

CRI 73+

CCT(K)

3,0004,0005,0005,700

PF .9

L70 (Hours) 50,000+

Color Black

Housing Die Cast Aluminum

Optic Types T3=Type IIIT5=TypeV

Temperature Range -40°C to 50°C

Warranty 10 Years

Catalog # Description 110W 150W 300WMSF-AS-00 Slip Fitter for Access Area Light x x xMAM-AS-0S Square Pole Arm for Access Area Light x x xMTN-AS-00 Trunnion Mount for Access Area Light x x xMTN-AS-00 Round Pole Adapter for Access Area Light, 6 inch x x xMYK-AS-01 Yoke Mount Bracket for 110W/150W Access Area Light x xMYK-AS-01 Yoke Mount Bracket for 300W Access Area Light xSHD-AS-01 Shield for 110W/150W Access Area Light x xSHD-AS-02 Shield for 300W Access Area Light x

IP65 1-10V Dim Toxin-Free -40°C - 50°COperating

Photocell Motion Sensor

YearWarranty

AS Access Area LightOutdoor

www.atgledlighting.comT: 951.245.6222E: [email protected]

© 2020 LED Lighting10588 Monte Vista AveMontclair, CA

AS

Data subject to change. Last Edited: March 2, 2020 2:29 PM

https://atgelectronics.com/wp-content/uploads/2019/06/Area-and-Flood-Accessories.pdf

Lumen Data

Stock ItemATG Core Poduct

Catalog Number Wattage (W) System Wattage

4K 5K

T3 T3

Efficacy (Lm/W) Lumens (Lm) Efficacy (Lm/W) Lumens (Lm)

AS11-50-T3 110W 114.5 132 15,181 135 15,412

AS15-50-T3 150W 149.5 132 19,761 134 20,058

AS30-50-T3 300W 313.5 130 41,007 132 41,474

Catalog Number SPD Distribution BUG EPA

AS11-XX 10KV Optional T2 B3U2G2 2.1



Dimensions

Part No. Length (L) Width (W) Height (H)

AS11 20.9 11.8 3

AS15 20.9 11.8 3

Recorded in inches


AS11 20.5 11.8 5.8

AS15 20.5 11.8 5.8

Recorded in inches


AS11 26.7 14.2 5.8

Recorded in inches


AS30 27.2 14.2 3.1Recorded in inches

Slipfitter110W

150W

Squaremount110W

150W

Squaremount300W

Slipfitter300W

뇈샽

1,0

00

LL

L

L

W

W

W

W

H

H

H

H




AS


Dimensions

Accessories

Drilling Detail

Shield

Shield

100W -300WSHD-AS

Ø0.354" [Ø9.0]

Ø0.630" [Ø16.0]

4.000" [101.6]

2.008" [51.0]

Access 110w-150w shield

131.5 305.0

120.0

12.986.0

1.5




AS


Electrical Accessories

BRI823Digital PIR Bi-level Sensor

Power Supply 120-277VAC 50/60Hz

Maximum Load -40°C-70 °C

Resistive/Tungsten - 600W@120VBallast Electronic (LED) -800/1200VA@120/277V

Dim Control Output 0-10V, max. 25mA sinking current

Detection Radius/Angle

30ft@40ft height/360 °

Mounting Height Max 24ft. @LW1 Max 40ft. @LS2

Remote Range 50ft. (15m) indoor, no backlight

Humidity Max. 95% RH

Temperature -40 °C - +70°C

Wiring

Ordering Information

BRl823-B-D wiring with dimming ballast or LED driver. Dimming Driver

LOAD(Red)

NEUTRAL(White)

Dimming Driver

GRAY(-)

VIOLET(+)

NEUTRAL(White) LINE(Black)

Catalog No. Color

□ BRl823-B-O-LW1 White

□ BRl823-B-O-LS2 White

□ BRl823-B-D-LW1 White

□ BRl823-B-D-LS2 White

□ RC-100 Black

BRl823-B-D wiring with non-dimming ballast or LED driver. Non-Dimming Driver

LOAD(Red)

NEUTRAL(White)

Non-Dimming Driver

NEUTRAL(White) LINE(Black)

Close En d Wire Connector

Description

ON/OFF Sensor,360° lens, maximum coverage 48' diameter from 8'-20' height

ON/OFF Sensor,360° lens, maximum coverage 60' diameter from 8'-40' height

Dimming Sensor,360° lens, maximum coverage 48' diameter from 8'-20' height

Dimming Sensor,360° lens, maximum coverage 60' diameter from 8'-40' height

Remote con trol Battery : AAA x 2

0

0

0

0

0

0

BR

l823-B-D

Digital H

igh/Low

/Off Passive Infrared

Fixture Integrated O

utdoo

r Senso

r H

old

off setpo

int w

ith auto

matic

calibratio

n o

ption

for co

nven

ience

and

add

ed en

ergy savings

Fully adju

stable h

igh an

d lo

w

dim

med

light levels; o

ption

al d

usk to

daw

n con

trol

BR

l823-B-D

R

C-100

(OP

TIO

NA

L)

IP65 rated

for w

et locatio

ns

Mu

ltiple mo

unting o

ptions fo

r easy installatio

n

0

IP

RO

JEC

T

I LO

CATIO

N/TYP

E

Product O

verview

Descrip

tion

The BR

l823-B-D

mounts in an outdoor lighting

fixture and provides multi-level control based on

motion and/or daylight contribution. It controls

0-1 0 VD

C LE

D drivers or dim

ming ballasts, and

is rated for wet and cold locations.

All control param

eters are adjustable via aw

ireless configuration tool capable of storing andtransm

itting sensor profiles.

Op

eration

Typically, the sensor ramps lighting O

n to the selected High m

ode level when m

otion is detected and the am

bient light level is below the hold

off setpoint. After the sensor stops detecting

movem

ent and the time delay elapses, lights fade

to the Low m

ode level. If there is no motion during

the subsequent cut off time delay, the lights w

ill turn O

ff. For dusk to dawn control, the integral

photocell can switch the lights O

n and Off based on

the ambient light level so that lighting rem

ains on overnight even w

ithout motion detection.

Features .

Provides line voltage O

n/Off sw

itching and 0-1 0V

DC

dimm

ing control•

Works w

ith ballasts or LED

drivers•

High and low m

odes fully adjustable fromO

to 1 0V•

Time delay from

5 to 30 minutes

•O

ptional cut off delay•

Adjustable ram

p up and fade down tim

es

Specifications Power supply

120-277VAC

Wireless H

andh

eld Con

figuration

Tool Initial setup and subsequent sensor adjustm

ents are m

ade using a handheld configuration tool (R

C-100). This tool enables adjustm

ent of param

eter, is also used to initiate automatic

calibration of the BR

l823-B-D

ambient light level

setpoint. The setpoint is used to hold the controlled lighting off or at low

level when there is

sufficient daylight. The wireless tool stores up

to five sensor parameter profiles to speed

configuration of multiple sensors.

Ap

plication

s The slim

, low-profile B

Rl823-B

-D is designed for

installation inside the bottom of a light fixture

body. When fully assem

bled and installed in an IP

65-rated fixture, the PIR

sensor module parts

are IP65 outdoor rated. The sensor is ideal for

areas such as parking facilities, gas stations, pedestrian pathw

ays and warehouses. A

choice of tw

o PIR

Lens ensures complete coverage for

mounting heights up to 40'.

•C

LAS

S 2 for w

hole sensor•

Optional daylighting setpoints feature

automatic calibration, or perm

it manual

adjustment.

•P

olycarbonate, flame retardant, UV

resistant,im

pact resistant.•

UL773A

and FCC

Maximum load Resistive/Tungsten -600W

@120V @ -40'F -+158'F

(-40'C -+70'C) Dim control outout Detection radius/angle Mounting height Remote range Humidity Temperature

Ballast Electronic (LED)-800/1200VA@120/277V

0-10V max. 25mAsinkina current

30FT@40FT HeighU360'

Max 24ft. @LW1

Max 40ft. @LS2 50ft. (15m) indoor, no backlight Max. 95% RH -40'F -+158'F (-40'C -+70'C)

Daylight Sensor

Motion Sensor

See sensor specsheet for more information

FSP-221B-D*BiLevel SensorIP66 Rated110-480V

Photocell

Load Ratings

@120V 0-800W tungsten, ballast, LED driver; 1/6hp motor@230-240V 0-300W ballast, LED driver@277V 0-1200W ballast, LED driver; 1/6hp motor@347/480V 0-1200W ballast, LED driver

0-10V Sinking Current

50mA

High/Low Modes high:0-10V, low: off, 0-9.8V

Time Delay 30 sec, 1-30 min

Cut Off Delay none, 1-59 minutes, 1-5 hours

Sensitivity/Service mode

low, med, max: on-fix, off-fix

Setpoints hold off setpoint: none, 1-250 fc, autophotocell on/off setpoint: 1-250fc

Ramp and Fade Times

1-60 sec

Op Temperature -40°F to +167°F (-40°C to +75°C)

Motion Sensor

*See Sensor Specsheet for more information

Shield

300WSHD-AS

Accessories

Access 300w shield

1.5

211.5

12.9

86.0

120.0

365.0




AS


Mounting

Yoke Mount

MYK-AS-01

Trunnion Mount

MTN-AS-00

327,

00

3,50

50,00

118,50

Slipfitter

MSF-AS-00

Square Mount

MAM-AS-0S

See mounting accessories on accessory specsheet.




AS


https://atgelectronics.com/wp-content/uploads/2019/06/Area-and-Flood-Accessories.pdf

Photometric

.1

.2

.51

2

5

10

.1

.2

.512

5

10

20

.1

.2

.51

2

.1

.2

.51 2

5

.1

.2

.51

2

5

10

.1

.2

.5 1 2

AS11-50-T3 @25’

AS30-50-T3 @25’

AS15-50-T3 @25’ AS15-50-T5 @25’AS11-50-T5 @25’

AS30-50-T5 @25’




AS


ATG Electronics®Industry Leading 10 Year Limited WarrantyFor North American LED Lighting Fixtures

ATG Electronics warrants to the original purchaser of ATG Electronics Domestic LED products listed above that were manufactured for which the ATG Electronics Spec Sheet located on our website contains the words “10 year limited warranty” that, subject to the below terms and conditions of this warranty, when such LED products are properly installed they will comply with ATG Electronics published product specifications for such products and will be free from material defects in material and workmanship for a period of ten (10) years from the date of sale by ATG Electronics, or, if lesser, 50,000 hours of operation (at an average of 13.6 hours per day operation). The LED arrays in the Product(s) will be considered defective in material or workmanship only if a total of 15% or more of the individual light emitting diodes in the Product(s) fail to illuminate.

The above express limited warranty is extended by ATG Electronics® only to the original or first end-user purchaser and only for the original installed location. This warranty only applies to products purchased after June 1, 2017. This warranty is non-transferrable, whether by assignment or operation of law. The original purchaser must provide warranty claims to ATG Electronics within the warranty period promptly upon discovery and in accordance with ATG Electronics Return and Repair Procedures as outlined within this document.

Should any defects be found by ATG Electronics upon its inspection of the properly returned product, ATG Electronics sole responsibility and liability under this warranty will be, at its option, to either repair or replace the defective part or parts or else make available a new replacement unit that will provide equal or better performance. All decisions regarding the existence or non-existence of defects or otherwise affecting the warranty shall be made by ATG ELECTRONICS and shall be final and binding on all parties. Where a defective LED product is replaced under this warranty, the balance of the original warranty period shall remain effective.

Conditions and Exclusions

This warranty is conditioned upon proper installation, use and maintenance. This warranty will automatically become null and void and shall not be applicable to any LED fixture which (i) has not been timely paid for, (ii) is not installed and operated in accordance with the current edition of The National Electric Code (NEC), the Standards for Safety of Underwriters’ Laboratory, Inc. (UL) or with ATG Electronics instructions and guidelines, (iii) has been moved from its original installation, (iv) has been installed within an area that has exposure to sulfur or any area with high acidic compounds in use, (v) has been operated in an ambient temperature or humidity that is higher than 35 degrees Celsius, (vi) has been subjected to a lightning strike, power surge or overvoltage condition, (vii) has its LED Board subjected to static electricity due to failure to discharge same prior to connecting or disconnecting the lead from the LED board, (viii) was not installed and/or operated in accordance with ATG Electronics instructions and guidelines, (ix) has been mishandled, misused, abused, tampered with, modified or altered by anyone other than ATG ELECTRONICS, (x) has been subjected to abnormal stresses and operating conditions, or (xi) has been operated without overvoltage and lightning protection devices in place.

Limitations

Disclaimers & Limitations of Liability

The foregoing warranty is exclusive of all other statutory, written or oral warranties and no other warranties of any kind, statutory, by operation of law or course of performance, or otherwise, are given, herein expressed or otherwise received. EXCEPT AS EXPRESSLY PROVIDED ABOVE, ATG ELECTRONICS DISCLAIMS ALL REPRESENTATIONS, WARRANTIES AND CONDITIONS OF ANY KIND, EXPRESS OR IMPLIED, REGARDING THE LED PRODUCTS AND ITS SERVICES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE OR PURPOSE.

LIMITATION OF LIABILITY. Other than the obligation to repair or replace as provided above, ATG Electronics shall have no liability for any losses, expenses or damages as a result of the installation, use, inability to use, removal or replacement of any LED product. ATG Electronics will not under any circumstances whether as a result of breach of contract, breach of warranty, tort, strict liability or otherwise be liable for consequential, incidental, special or exemplary damages including but not limited to, loss of profits or revenues, loss of any other goods or associated equipment or damage to any associated equipment, cost of capital, cost of substitute products, facilities or services, down time cost or claims of claimant’s customers. ATG Electronics liability on any claim of any kind for any loss or damages arising out of, resulting from or concerning any LED product, any aspect of this warranty or for any products or services furnished hereunder shall not exceed the price of the fixture which gives rise to the claim.

Return and Repair Procedures

All warranty requests and or questions are to be directed to ATG Electronics Customer Service Department (CSD) at 888-618-7298. If deemed necessary, the CSD will issue a Returned Merchandise Authorization (RMA) number which must be included on both the packing slip of the component or fixture being returned and on the outside of the box. You must include your name and contact information, including your email address, on the packing slip so that we can contact you easily. Each component or fixture must be packaged very carefully and properly so as to prevent damages in shipment and must be shipped freight prepaid. Please obtain a proof of delivery to ensure that the material is received.

Once the component or fixture has been received and tested, an evaluation report will be provided to the end user via email. This report will clarify the following:

A) The component / fixture is covered under the warranty policy and will either be repaired or replaced.B) The component / fixture is not covered under the warranty policy and the reason for this determination.

If ATG ELECTRONICS determines that the component or fixture is covered under the warranty, then the appropriate repairs will be started or a replacement fixture will be manufactured and shipped. Please note that in the event the returned component or fixture is found not to be covered under this warranty, you may be subject to a labor charge for the evaluation process and will be responsible for all return shipping charges and fees. For components and fixtures determined to be covered under this warranty prior to the first anniversary of the Sale Date, the repaired or replacement component or fixture will be returned to you at no charge. You will be responsible for all other shipping charges.

No Labor Reimbursement

All components and fixtures determined to be covered by this warranty as provided above, will be repaired or replaced at no charge to the customer, however, except as expressly provided above with respect to recessed and linear fixtures during the first year, the customer must hire and pay for an electrician to remove and reinstall such components and fixtures. No labor costs will be covered for the removal or reinstallation of any components or fixtures. The warranty does not cover modifications, repairs or replacements, or the related labor or materials costs, that may be necessary to facilities or third party products in connection with the removal, repair, or replacement of any LED product under this warranty.

10 Year Warranty




AS


A Access Area Light OutdoorMar 02, 2020 · AS11-50-T3 110W 114.5 132 15,181 135 15,412 AS15-50-T3...

Documents

Transcript of A Access Area Light OutdoorMar 02, 2020 · AS11-50-T3 110W 114.5 132 15,181 135 15,412 AS15-50-T3...