92 Cam Latch - Southco · 135 Dimensions in millimeters (inch) unless otherwise stated Handle...
Transcript of 92 Cam Latch - Southco · 135 Dimensions in millimeters (inch) unless otherwise stated Handle...
134
ACTUAL SIZE
ACTUAL SIZE
Dimensions in millimeters (inch) unless otherwise stated
Lockcore
Lockcore
Escutcheon
Escutcheon
54(2.13)
Handle
Handle
84(3.31)
25(.98)
25(.98)
Cam
Cam
Retainer plate
Reatainer plate
Jam nut (2)
Spring washer
Spring washer
Shaft (M10 thread)
Shaft (M10 thread)
Note: Do not alter this factorypre-set nut
Note: Do not alter this factorypre-set nut
Lockwasher (2)
Lockwasher (2)
Grip range
0.8 (.03)39 (1.53) A
A
Gasket
Gasket
90˚�
48.5(1.90)swingradius
100 (3.94)swing radius
0.8 (.03)
39 (1.53)
112.5(4.43)
27(1.06)
54 (2.13)
Jam nut (2)
90˚�
G
Grip rangeG
92 Cam LatchT and L-Handle · Adjustable grip
• Round hole install• Detents in open and closed position
Material and FinishZinc alloy and steel, zinc plated
Performance DetailsMaximum static load: Short cam 400 N (90 lbf) Long cam 200 N (45 lbf)
Installation NotesScrew and lockwasher assembly M4 x 10 (supplied). For door thickness > 3.0 (.12), calculate screw length using the following formula: Door thickness + 7.00 (.28)
KeysSee page 130
NotesFor fixed grip versions see page 124
For version with 8 (.32) square shaft see page 143
4 (.16)Short cam
24 (.93)
47(1.86)
1.2 (.05)5 (.19)
19(.75)
5 (.19)
19 (.75)
19 (.75)
48 (1.88)
Ø 4 (.16) Studs 19(.75)
38 (1.5)Short cam
57 (2.25)Long cam
5 (.19)Long cam
www.southco.com/92
Cam (supplied) Retainer Plate (supplied)
T-Handle
L-Handle
135
Dimensions in millimeters (inch) unless otherwise stated
Handle assemblyGasket
Cam
Retainer plate
Optional rodsfor multi-point(see pages 198-199)
38±0.2(1.50±.01)
Ø 21±0.1(.83±.005)
FrameDoor
1 For short cam:25.5 (1.00) Minimumto 32 (1.25) Maximum
2 Holes,Ø 4.8±0.1
(.19±.004)
19±0.1 (.750±.005)
2 For long cam:25.5 (1.00) Minimumto 51 (2.00) Maximum
C C
Type“A”
Type“B”
Turn clockwiseto latch
Turn counter-clockwiseto latch
L Lock style1 T-handle non-locking2 T-handle key-locking CH751 (two keys supplied)3 L-handle non-locking4 L-handle key-locking CH751 (two keys supplied)
92 - L R - F G C
R Rotation1 Type A clockwise to latch2 Type B counter-clockwise to latch
F Finish1 Bright chrome5 Black powder coated
C Cam 1 Short 38 (1.5)2 Long 57 (2.25)
___________________________________________________________________________ Part Number Selection See table
www.southco.com/92
G Grip Minimum Maximum A
1
16 (.63)
19 (.75) 32 (1.25)
2 32 (1.25) 44.5 (1.75)
3 44.5 (1.75) 57.5 (2.25)
143
Other options available. For complete details on variety, part numbers, installation and specification, go to
Other options available. For complete details on variety, part numbers, installation and specification, go to
ACTUAL SIZE
Dimensions in millimeters (inch) unless otherwise stated www.southco.com/92
• Single hole installation• Accommodates wide grip ranges
Material and FinishNylon and steel, zinc plated
Performance DetailsMaximum static load: 110 N (25 lbf)
NotesKnob style shown. Additional L-handle and flush slotted styles available
61 Cam LatchUniversal cabinet series · Adjustable grip
19(.75)
L
Shaft, 4.8 (.19) sq.
1 Hole Ø 6.8 (.27 )
Ø 24.1(.95)
+.005-.000
+0.1-0.0
Ø 22.5(.88)
Max.totalgrip
Frame
13(.50)
17.5(.69)
33.5(1.31)
8 (.31)
3.2 (.13) 9.5(.38)
Setscrew
Cam
Retainer clip
Door
Maximum Total Grip Shaft Length L Assembly Part number
12.5 (.50) 25.5 (1.00) 61-10-102-11
25 (1.00) 38 (1.50) 61-10-104-11
44.5 (1.75) 57 (2.25) 61-10-107-11
92 Cam LatchT, Compact-T and L-handle · Adjustable grip
• Easy cam adjustments
Material and FinishZinc alloy, powder coated or chrome plated and steel, zinc plated
Performance DetailsMaximum static load: 150 N (34 lbf)
NotesBlack and chrome finish available
For versions with threaded shaft see page 134.
For fixed grip versions see page 124.
Gasket Part Number: 92-70-G (sold separately)
33.2(1.31)
Type Aclockwiseto latch
Type Bcounter-clockwiseto latch
Cam (sold separately)
13.6(.54)
40.7(1.6)
Shaft length
61.2(2.41)
Concealed mounting holes8-32 threads
Finish Shaft Length
Locking Compact-T Part Number
Type A Type B
Black
38.1 (1.5) 92-61-113-50 92-61-213-50
50.8 (2.0) 92-61-114-50 92-61-214-50
63.5 (2.5) 92-61-115-50 92-61-215-50
10.9 (.43)
3.6 (.14)
60.9 (2.4)
50.8 (2.0)
19 (.75)
7.9 (.31) Square
Cam Part Number
92-24-203-12
Cam
ACTUAL SIZE
www.southco.com/61
Knob Style
Compact T-handle
Compact T-handle style shown. T and L-handle style available. Locking and non-locking.