8/30/12

13
8/30/ 12 PAR-28 Installation 2013 Ford Police Interceptor Utility

description

PAR-28 Installation. 2013 Ford Police Interceptor Utility. 8/30/12. PAR-28 Installation. 2013 Ford Police Interceptor Utility does not come with fog lights Front facia is made from solid plastic Round area in facia needs to be cut out for fog light to mount - PowerPoint PPT Presentation

Transcript of 8/30/12

Page 1: 8/30/12

8/30/12

PAR-28 Installation2013 Ford Police Interceptor Utility

Page 2: 8/30/12

• 2013 Ford Police Interceptor Utility does not come with fog lights

• Front facia is made from solid plastic

• Round area in facia needs to be cut out for fog light to mount

• Bracketry on the back side of front facia to support fog lights needs

to be purchased from Ford

PAR-28 Installation

Page 3: 8/30/12

The following parts need to be purchased from your local Ford dealer:

• (1) Driver Side Bracket – (BB5Z-15266-A)

• (1) Passenger Side Bracket – (BB5Z-15266-B)

• (6) Bracket Mounting Screws – (W706805-S902)

• (6) Mounting Nuts – (W715051-S439)

• (8) Light Mounting Screws – (N807011-S424)

Page 4: 8/30/12
Page 5: 8/30/12

• Fog Light – (PAR28)

• Explorer/Utility Bracket - (P28FX11)

PARTS

Page 6: 8/30/12

Using a 3.5” Hole Saw, Cut Out Fog Light Hole in FaciaSTEP 1

Page 7: 8/30/12

Before After

Remove Plastic Tabs from Ford Mounting Brackets(BB5Z-A & BB5Z-15266-B)STEP 2

Page 8: 8/30/12

Install Mounting Nuts into facia(W715051-S439)STEP 3

Page 9: 8/30/12

Mount PAR-28 Lighthead and P28FX11 together per Installation GuideSTEP 4

Page 10: 8/30/12

Install PAR-28 and Bracket Assembly into Ford Mounting Bracket using the Light

Mounting Screws (N807011-S424)STEP 5

Page 11: 8/30/12

Install Complete Assembly into facia using the Bracket Mounting Screws (W706805-5902)STEP 6

Page 12: 8/30/12

Finished Product

Page 13: 8/30/12