6002 power track – non-continuous roPAG 1 - ENG 6002 power track – non-continuous row Frame...

1
The reported luminous flux is the flux emitted by the light source with a tolerance of ± 10% compared to the indicated value. The W tot column indicates the total wattage absorbed by the system without exceeding 10% of the indicated Contact the Consulting and design Centre for any lighting information. 05/02/2021 PAG 1 - ENG 6002 power track – non-continuous row Frame structure for the creation of continuous row of Techno System fixtures or in combination with other products (see table). Simple and quick mounting as a ceiling or a suspension fixture thanks to the wide range of accessories. The track is designed to house 5-pole or 7-pole terminal block (the latter to be used for the EMergency and DIMMable DALI versions) or 11-pole block with rapid connectors.  Track housing: painted rolled steel with rounded edges for hand safety and galvanized steel previously stove-enamelled with a UV-stabilised, anti- yellowing white polyester resin applied after phosphate treatment; supplied with cable 1,5 mm2. Produced according to applicable EN60598-1 CEI 34-21 standards, degree of protection according to EN 60529 standards. The power track 6002 is designed to be used with a lower number of connectors (1 or 2) for applications where continuous row mounting is not required. It will ensure aesthetic uniformity (due to the absence of unused connectors) and increase savings. Designed to allow the quick non-continuous row mounting of luminaires of the Techno System series. 13296046000200 - 1 connector (left) 13296100002265 - 1 connector (left) 13296100002266 - 1 connector (left)  13296046002265 - 1 connector (right) 13296100002021 - 1 connector (right) 13296100002267 - 1 connector (right)  13296546000199 - 2 connectors (right + left) 13296600002022 - 2 connectors (right + left) 13296600002025 - 2 connectors (right + left)  13296546002265 - 1 connector (central) 13296600002023 - 1 connector (central) 13296600002268 - 1 connector (central) Download DXF 2D - chanEL.dxf Montaggi - 6001-6002-6003 mount examples.pdf Code Gear Kg WTot Colour 132960-46000200 S 3.25 0 W WHITE 132961-00002265 S 3.25 0 W WHITE 132961-00002266 S 3.25 0 W WHITE 132960-46002265 S 3.25 0 W WHITE 132961-00002021 S 3.25 0 W WHITE 132961-00002267 S 3.25 0 W WHITE 132965-46000199 S 4.70 0 W WHITE 132966-00002022 S 4.70 0 W WHITE 132966-00002025 S 4.70 0 W WHITE 132965-46002265 S 4.70 0 W WHITE 132966-00002023 S 4.70 0 W WHITE 132966-00002268 S 4.70 0 W WHITE Products - 6600 Techno System - 90° symmetric - CRI 90 - 6601 Techno System - 25° asymmetric - CRI 90 - 6602 Techno System - 25° bi- asymmetric - CRI 90 - 6603 Techno System - 30°x80° elliptical - CRI 90 - 6604 Techno System - 60° wide-beam - CRI 90 - 6605 Techno System - wide- beam semi-spherical diffuser - CRI 90 - 6606 Techno System HE - UGR - CRI 80 - 6611 Techno System HE - 90° symmetric - CRI 80 - 6615 Techno System HE - 60° wide-beam - CRI 80 - 6614 Techno System HE - 30°x80° elliptical - CRI 80 - 6612 Techno System HE - 25° asymmetric - CRI 80 - 6613 Techno System HE - 25° bi-asymmetric - CRI 80 - 6616 Techno System HE - wide-beam semi-spherical - 6617 Techno System HE - 90° Opal symmetric - CRI 80

Transcript of 6002 power track – non-continuous roPAG 1 - ENG 6002 power track – non-continuous row Frame...

Page 1: 6002 power track – non-continuous roPAG 1 - ENG 6002 power track – non-continuous row Frame structure for the creation of continuous row of Techno System fixtures or in combination

The reported luminous flux is theflux emitted by the light source witha tolerance of ± 10% compared tothe indicated value. The W totcolumn indicates the total wattageabsorbed by the system withoutexceeding 10% of the indicated

Contact the Consulting and design Centre for any lighting information. 05/02/2021 PAG 1 - ENG

6002 power track – non-continuous row

Frame structure for the creation of continuous row of Techno System fixturesor in combination with other products (see table). Simple and quick mountingas a ceiling or a suspension fixture thanks to the wide range of accessories.The track is designed to house 5-pole or 7-pole terminal block (the latter to beused for the EMergency and DIMMable DALI versions) or 11-pole block withrapid connectors.  Track housing: painted rolled steel with rounded edges for hand safety andgalvanized steel previously stove-enamelled with a UV-stabilised, anti-yellowing white polyester resin applied after phosphate treatment; suppliedwith cable 1,5 mm2.Produced according to applicable EN60598-1 CEI 34-21 standards, degree ofprotection according to EN 60529 standards.The power track 6002 is designed to be used with a lower number ofconnectors (1 or 2) for applications where continuous row mounting is notrequired. It will ensure aesthetic uniformity (due to the absence of unusedconnectors) and increase savings.Designed to allow the quick non-continuous row mounting of luminaires of theTechno System series.13296046000200 - 1 connector (left) 13296100002265 - 1 connector (left)13296100002266 - 1 connector (left)   13296046002265 - 1 connector (right)13296100002021 - 1 connector (right) 13296100002267 - 1 connector (right)  13296546000199 - 2 connectors (right + left) 13296600002022 - 2connectors (right + left) 13296600002025 - 2 connectors (right + left)  13296546002265 - 1 connector (central) 13296600002023 - 1 connector(central) 13296600002268 - 1 connector (central)

DownloadDXF 2D- chanEL.dxf

Montaggi- 6001-6002-6003 mountexamples.pdf

Code Gear Kg WTot Colour132960-46000200 S 3.25 0 W WHITE132961-00002265 S 3.25 0 W WHITE132961-00002266 S 3.25 0 W WHITE132960-46002265 S 3.25 0 W WHITE132961-00002021 S 3.25 0 W WHITE132961-00002267 S 3.25 0 W WHITE132965-46000199 S 4.70 0 W WHITE132966-00002022 S 4.70 0 W WHITE132966-00002025 S 4.70 0 W WHITE132965-46002265 S 4.70 0 W WHITE132966-00002023 S 4.70 0 W WHITE132966-00002268 S 4.70 0 W WHITE

Products

- 6600 Techno System - 90°symmetric - CRI 90

- 6601 Techno System - 25°asymmetric - CRI 90

- 6602 Techno System - 25° bi-asymmetric - CRI 90

- 6603 Techno System - 30°x80°elliptical - CRI 90

- 6604 Techno System - 60°wide-beam - CRI 90

- 6605 Techno System - wide-beam semi-spherical diffuser -CRI 90

- 6606 Techno System HE -UGR - CRI 80

- 6611 Techno System HE - 90°symmetric - CRI 80

- 6615 Techno System HE - 60°wide-beam - CRI 80

- 6614 Techno System HE -30°x80° elliptical - CRI 80

- 6612 Techno System HE - 25°asymmetric - CRI 80

- 6613 Techno System HE - 25°bi-asymmetric - CRI 80

- 6616 Techno System HE -wide-beam semi-spherical - 6617 Techno System HE - 90°

Opal symmetric - CRI 80