60 cell - Australia Wide Solar | Sydney · PDF file60 cell LG NeON™ 2 ... MPP Current...

2
EN LG300N1T-G4 - Cello Technology - Transparent backsheet 60 cell LG NeON™ 2 BiFacial is designed to utilize both sides of PV module for absorbing more light and generating more energy. It also adoptsCello technology which replaces 3 busbars with 12 thin wires to enhance power output and reliability. It is possible to produce an abundance of output energy with LG NeON™ 2 BiFacial. About LG Electronics LG Electronics is a global big player, committed to expanding its operations with the solar market. The company first embarked on a solar energy source research program in 1985, supported by LG Group’s vast experience in the semi-conductor, LCD, chemistry and materials industries. In 2010, LG Solar successfully released its first MonoX® series to the market, which is now available in 32 countries. The NeON™ (previous. MonoX® NeON) and The NeON™2 won the “Inter- solar AWARD” in 2013 and 2015, which demonstrates LG Solar’s lead, innovation and commitment to the industry. Key Features Bifacial Energy Yield It is possible to produce 30% more energy and output energy can be increased more under optimized surrounding conditions. Better Performance on a Sunny Day LG NeON™ 2 BiFacial now performs better on sunny days thanks to its improved temperature coefficiency More Generation on a Cloudy Day LG NeON™ 2 BiFacial gives good performance even on a cloudy day due to its low energy reduction in weak sunlight. High Power Output LG NeON™ 2 BiFacial has been designed using LG’s new Cello technology which is able to achieve high rear efficiency cell over 92.5% based on front efficiency. Enhanced Performance Warranty LG NeON™ 2 BiFacial has an enhanced performance warranty. The annual degradation has fallen to 0.6%/yr from 0.7%/yr of the previous LG NeON™ module. +2.4%p 25yr Near Zero LID (Light Induced Degradation) The n-type cells used in LG NeON™ 2 Bifacial have almost no boron, which may cause the initial efficiency to drop, leading to less LID. BiFacial ~+3%

Transcript of 60 cell - Australia Wide Solar | Sydney · PDF file60 cell LG NeON™ 2 ... MPP Current...

Page 1: 60 cell - Australia Wide Solar | Sydney · PDF file60 cell LG NeON™ 2 ... MPP Current (Impp) [A] 9.15 9.79 10.43 11.04 Open Circuit Voltage ... IEC 61701(Salt mist corrosion test)

EN

LG300N1T-G4

- Cello Technology- Transparent backsheet

60 cellLG NeON™ 2 BiFacial is designed to utilize both sides of PV module for absorbing more light and generating more energy. It also adoptsCello technology which replaces 3 busbars with 12 thin wires to enhance power output and reliability. It is possible to produce an abundance of output energy with LG NeON™ 2 BiFacial.

About LG ElectronicsLG Electronics is a global big player, committed to expanding its operations with the solar market. The company first embarked on a solar energy source research program in 1985, supported by LG Group’s vast experience in the semi-conductor, LCD, chemistry and materials industries. In 2010, LG Solar successfully released its first MonoX® series to the market, which is now available in 32 countries. The NeON™ (previous. MonoX® NeON) and The NeON™2 won the “Inter-solar AWARD” in 2013 and 2015, which demonstrates LG Solar’s lead, innovation and commitment to the industry.

Key Features

Bifacial Energy YieldIt is possible to produce 30% more energy and output energy can be increased more under optimized surrounding conditions.

Better Performance on a Sunny DayLG NeON™ 2 BiFacial now performs better on sunny days thanks to its improved temperature coefficiency

More Generation on a Cloudy DayLG NeON™ 2 BiFacial gives good performance even on a cloudy day due to its low energy reduction in weak sunlight.

High Power OutputLG NeON™ 2 BiFacial has been designed using LG’s new Cello technology which is able to achieve high rear efficiency cell over 92.5% based on front efficiency.

Enhanced Performance WarrantyLG NeON™ 2 BiFacial has an enhanced performance warranty. The annual degradation has fallen to 0.6%/yr from 0.7%/yr of the previous LG NeON™ module.

+2.4%p

25yr

Near Zero LID (Light Induced Degradation)

The n-type cells used in LG NeON™ 2 Bifacial have almost no boron, which may cause the initial efficiency to drop, leading to less LID.

BiFacial

~+3%

Page 2: 60 cell - Australia Wide Solar | Sydney · PDF file60 cell LG NeON™ 2 ... MPP Current (Impp) [A] 9.15 9.79 10.43 11.04 Open Circuit Voltage ... IEC 61701(Salt mist corrosion test)

PreliminaryLG300N1T-G4EN

* STC (Standard Test Condition): Irradiance 1000 W/m², Module Temperature 25 °C, AM 1.5* The nameplate power output is measured and determined by LG Electronics at its sole and absolute discretion.

Electrical Properties (STC*)Module LG300N1T-G4 10% 20% 30%

Maximum Power (Pmax) [W] 300 321 342 363

MPP Voltage (Vmpp) [V] 32.9 32.8 32.8 32.9

MPP Current (Impp) [A] 9.15 9.79 10.43 11.04

Open Circuit Voltage (Voc) [V] 40.1 40.1 40.2 40.3

Short Circuit Current (Isc) [A] 9.65 10.28 10.83 11.33

Module Efficiency [%] 18.3 19.6 20.8 22.1

Operating Temperature [°C] -40 ~ +90

Maximum System Voltage [V] 1000

Maximum Series Fuse Rating [A] 20

Power Tolerance (%) [%] 0 ~ +3

* NOCT (Nominal Operating Cell Temperature): Irradiance 800 W/m2, module temperature 20 °C, wind speed 1 m/s

Electrical Properties (NOCT*)Module LG300N1T-G4

Maximum Power (Pmax) [W] 221.9

MPP Voltage (Vmpp) [V] 30.4

MPP Current (Impp) [A] 7.29

Open Circuit Voltage (Voc) [V] 37.3

Short Circuit Current (Isc) [A] 7.77

Dimensions (mm)

40

270

170

105

(Z view)Ø8.0Mounting holes(8ea)

(X view)5.5 x 4.0

Drain holes(4ea)

Ø4.3Grounding holes(4ea)

1000

(Distance between mounting holes)

(Size of short side)

1640

(Siz

e of

long

sid

e)

960

1100

Junction box

1000Cable length

(Dis

tanc

e be

twee

n m

ount

ing

hole

s)

1300

(Dis

tanc

e be

twee

n m

ount

ing

hole

s)Detail X

4.0

5.5

R1.5

Detail Y

4.0

7.5

Detail Z

Ø8.0

10 10

29

40 40

Long side frame

29

Short side frame

Drain holes(4ea)

(Y view)7.5 x 4.0

* The distance between the center of the mounting/grounding holes.

Mechanical PropertiesCells 6 x 10

Cell Type Monocrystalline / N-type

Cell Dimensions 156.75 x 156.75 mm / 6 inches

# of Busbar 12 (Multi Wire Busbar)

Dimensions (L x W x H) 1640 x 1000 x 40 mm

Front Load 6000 Pa

Rear Load 5400 Pa

Weight 17.0 ± 0.5 kg

Connector Type MC4

Junction Box IP67 with 3 Bypass Diodes

Length of Cables 1000 mm x 2ea

Glass High Transmission Tempered Glass

Frame Anodized Aluminium

* 1) 1st year: 98%, 2) After 2nd year: 0.6%p annual degradation, 3) 83.6% for 25 years

Certifications and Warranty

Certifications

IEC 61215, IEC 61730-1/-2

ISO 9001

IEC 62716 (Ammonia corrosion test)

IEC 61701(Salt mist corrosion test)

Fire Rating Class C

Product Warranty 12 Years

Output Warranty of Pmax Linear Warranty*

Temperature CharacteristicsNOCT [ °C ] 45 ± 3

Pmax [%/°C] -0.38

Voc [%/°C] -0.28

Isc [%/°C] 0.03

LG Electronics Inc.Solar Business DivisionSeoul Square 416, Hangang-daero, Jung-gu, Seoul 100-714, Korea

www.lg-solar.com

Product specifications are subject to change without notice.DS-N2-60-W-G-F-EN-60321

Copyright © 2016 LG Electronics. All rights reserved.01/02/2016

Characteristic Curves

Voltage (V)

10 1000W

600W

200W

800W

400W

6

2

8

4

0 10 3020 4015 3525 455

Curr

ent (

A)

Temperature (°C)

Isc

Voc

Pmax

140

60

100

20

120

40

80

0-40 900 25-25 50 75

Isc,

Voc

, Pm

ax (%

)

Including backside irradiation contribution in Isc as a percentage of STC

BiFacial