5.8m Solar House Installation Instruction

Introduction

• Step 1. connect the corner panels• Step 2. connect the back and side wall panels• Step 3. Install the roof• Step 4. Install the slopping wall (front wall)• Step 5. assemble the PVC profile inside the house• Step 6. assemble the corner aluminum plastic profile• Step 7. Install the door lock• Step 8. seal all the gap• Extra explanation about the solar panel connection

Step 1. connect the corner panels

• Put the 2 corner panels together, drill & rivet them

Step 2. connect the back and side wall panels

• Connect the panels as the pictures shown below

Step 3. Install the roof

• Install the roof profile first• Put the roof on, drill & rivet them

Step 4. Install the slopping wall (front wall)

• Install the wall panel as the picture shown

Step 5. assemble the PVC profile inside the house

• After rivet all the panel connection, put all the PVC profile on as the picture shown

Step 6. assemble the corner aluminum plastic profile

1. Finish view at this stage

2. Use the black glue to put the corner profile on the outside house

corner and the bottom part.

Step 7. Install the door lock

• Look at the single door lock installation instruction.

Step 8 seal all the gap

• Seal all the gap between panels by using the black glue

• Finish the house installation

Extra explanation

• The panel connection place is where to install the solar panel

finish