5-AXIS MACHINING CENTER - Mandelli Spark · Mandelli Sistemi SpA Via Caorsana, 35 - 29122 Piacenza...
Transcript of 5-AXIS MACHINING CENTER - Mandelli Spark · Mandelli Sistemi SpA Via Caorsana, 35 - 29122 Piacenza...
5-AXIS MACHINING CENTER
GANTRY CONFIGURATION
STAGGER DESIGN
New DESIGN for hard alloys | Stiffened Kinematic ChainsNew ROTARY TABLE equipped with 2 bearings, faster and strongerDamping elements on linear and A axes | HSK100 Electro-spindleFixed ROTARY TABLE configuration for High Performance Turning
Dynamics 60 m/min, 5 m/s2
Thrust 20000 N
Axes Travels X = 1200 mmY = 1200 mmZ = 1450 mm
Spindle A6000 800Nm HSK100A15000 300Nm HSK100
Rotary Table 2000 Kg
Damping Elements Optional(Turcite)
Ballscrews X = 1xø50 (optional 2xø50)Y = 2xø50Z = 2xø50
HIGH TORQUE, NO BLACKLASHUp to 6.000 Nm torque for 5X roughingand smooth finishing with double pinion drive
TILTING HEAD
TECHNICAL SPECIFICATIONS
SPARK 1200 ROTARY TABLE
Column design with increased staggered arrangement (angle + distance)
Reinforced structures close to ballscrew connectionsStiffened bearing supportsOptional double ballscrew on X axis
SPARK 1200
DAMPING
Pallet: 800x800
Drive: Direct Drive
Payload: 2000 Kg
Speed turning/milling: 800 rpm/100 rpm
Contouring S1: 7600 Nm
Clamping Torque: 20000 Nm
Capsizing Torque: 15000 Nm
DYNAMIC DAMPING DEVICECustom solutions for vibration damping to reduce tool wear and improve material removal rate
KINEMATIC CHAINDirect connection for higherdynamic response
LINEAR AXES
Mandelli Sistemi SpAVia Caorsana, 35 - 29122 Piacenza - Tel +39 0523 [email protected] - www.mandelli.com