45th International October Conference on Mining and ...
Transcript of 45th International October Conference on Mining and ...
University of BelgradeTechnical Faculty in Bor and
Mining and Metallurgy Institute Bor
WW
th
Vt^^SSBfe^.-C\S
<$m$>^
- m 1:::-^^k''':4Mk:^^lk '^:-B
on Mining and Metallurgy
'
jgHB r >*
w v.
^ ^
Svet%i^4^iS|^;>fvs'ffik1/1
_10 ri/*f-Aliot-i?h-l 116 - 19 October 2013
Bor Lake, Bor, Serbia
^^^^^^^^H
rhe 45"' International October Conference on Mining and Metallurgy
16-!9 October 2013. Bor lake, Bur (Serbia)
» ><• ir. hc.xf.bur.ttcn
TABLE OF CONTENTS
Planary Lectures
Florian Kongoli, Edward Z. O'Brien, S. Llubani, Ian McBow (Canada)
L12 ordered nano-heterostructures embedded in solids 3
Milan Medved (Slovenia)
Role ofcoal in energy supply, Velenje coal mine case - Batfor Underground mining 5
Velimir Radmilovic (Serbia)
Sustainability and its close relation with mining and metallurgy 6
Zeljko Kamberovic (Serbia)
Production ofmetals in Serbia: Redesignfor brightfuture 7
Jozef Medved, Maja Voncina, Darja Volsak, Primoz Mrvar (Slovenia)
Thermodynamic modeling ofadvanced aluminium alloys 15
Nadezda M.Talijan (Serbia)Advanced electrical contact materials basedon silver / nanoparticle metal oxide composites 21
Biljana Stojanovic (Serbia)Slovenian foundry industry in the year 2012 23
Alojz Krizman, Martin Debelak, Mirjam Jan-Blazic (Slovenia)
Magnetic andferroelectric properties ofmultiferroic materials 24
Alexander Udovsky (Russia)
Influence ofspin-density anisotropy and dimensionedfactor on bec alloys stability in Fe-
(Cr, V,Mo) systems 25
Justin van der Toorn, Dragana Davidovic, Nely Hadjieva, Ivan Strmbanovic, Istvan
Marton, Mathias Knaak, Richard Tosdal, Brett Davis, Sean Hasson (Serbia, Germany,
Australia, Canada)
A new sedimentary rock-hostedgold belt in Eastern Serbia 29
Conferences Papers
Hamed Nadimi, Mehrnoosh Marvasti, Davoud Haghshenas Fatmehsari, SadeghFiroozi, Amirreza Azadmehr (Iran)
Effect ofsodium acetate on the separation ofNi and Co by D2EHPA 37
Anja Terzic, Ljubica Pavlovic, Zagorka Radojevic, Ljiljana Milicic (Serbia)
Comparison ofproperties of bauxite basedrefractory concretes with and without addition of
fly ash determined by means ofnon-destructive methods 41
Jelena Dokovic (Serbia)
Crack kinking in materials with the perpendicular anisotropy 45
Mohamed Helmy Taha, Yasser Mohamed Khawassek (Egypt)
Kinetics ofleachingprocess ofsella uranium ore material, South eastern desert, Egypt 49
xi
The 45'h International October Conference on Mining and Metallurgy, 16-19 October 2013. Bor Lake, Serbia
Mircea Dobrescu, Marius Vasilescu, Ioana Vasilescu (Romania)
An amazing and environmentfriendly material: aerogel. Properties and applications 53
Fei Zhou, Hua-Zhi Gu, Chun-Feng Wang, Ao Huang (China)
Investigation on properties ofmodified expanded vermiculite /forsterile compositematertials 57
Lvping Fu, Huazhi Gu, Ao Huang, Hua Zheng, Hui Duan (China)
Influence ofMgO micro-powder on the properties ofmagnesia castable 61
Srdjan Matijasevic, Mihajlo Tosic, Snezana Grujie, Vladimir Zivanovic, Jelena
Nikolic, Jovica Stojanovic, Sonja Smiljanjic (Serbia)
The crystallization ofglass in the system Li20xGe02 *P205 65
Ana Ilic, Snezana Serbula, Tanja Kalinovic, Jelena Kalinovic, Marina Ilic (Serbia)
Correlation ofsulphur dioxide and particulate matter with meteorological factors 69
Rade Biocanin, Sonja Stefanov (Serbia)
Calcium- hipohlorit-innovative aproach in environmentalprocess 73
Slavica Mihajlovic, Dusica Vucinic, Zivko Sekulic, Vladimir Jovanovic, DraganRadulovic, Vladan Kasic (Serbia)
Defining parametersfor adsorption ofstearic acidto calcite 77
Zarko Radovic, Dragoljub Blecie, Milisav Lalovic (Montenegro)
The influence ofIftreatment on mechanical properties oflow-alloy steel 81
Pavel Ctibor, Zdenek Pala, Jiri Kotlan, Jan Soumar, Karel Neufuss (CzechRepublic)
Dielectric and mechanicalproperties ofplasma-sprayed garnets 85
Shehret Tilvaldyev, Abimael Jimenez Perez, Leili S. Tilvaldyeva (Canada)
Impacts ofmining on the environment in high mountains ofKyrgyzstan 89
Shehret Tilvaldyev, Juan Migel Diaz, Alfredo Villanueva, L. Rico (Mexico)
Advanced control requirementsfor mineral processing plants 94
Tatjana Vecko Pirtovsek, Iztok Perus, Jozef Medved, Jakob Likar, Milan Tercelj(Slovenia)
Increasing ofhot workability ofD2 tool steel 100
Ao Huang, Yang Zon, Huazhi Gu (China)
Effect of'Zr02 precursor on sintering characteristics and resistance coefficients ofA1203-
MgO castable matrix 108
Potoceanu Nadia, Fanica Cristian, Nedeloni Marian Marius (Romania)
Some consideration about presence ofnew forms ofquartz formation at Ocna de Fier 112
Sergey Makeev, Vladimir Romenets, Yury Pokhvisnev, Valery Valavin, Alexander
Zaytsev (Russia)
The peculiarities ofiron oxides reduction by ROMELT technology 116
Ridvan Yamanoglu, Erdem Karakulak, Muzaffer Zeren (Turkey)Hot pressing behavior oftitanium powders with nickel reinforcements 120
Erdem Karakulak, Ridvan Yamanoglu, Muzaffer Zeren (Turkey)Production ofAl-5Mg-xAl203 composites by powder metallurgy 124
Dragoljub Blecic, Irena Nikolic, Velimir Radmilovic (Montenegro)
Thermal stability ofelectric arc furnace slag basedgeopolymers 128
xii
The 45"1 International October Conference on Mining and Metallurgy, 16-19 October 2013. Bor Lake, Serbia
Trena Nikolic, Nebojsa Tadic, Zarko Radovic, Dragoljub Blecic, Milisav Lalovic
(Montenegro)
Influence ofalkali dosage on the thermal andfire resistance ofbauxite basedgeopolymers 132
Milena Tadic, Irena Nikolic, Velimir Radmilovic (Montenegro)
Comparative analysis ofhydrolytic stability ofslag andfly ash basedgeopolymers 136
Silvana Dimitrijevic, Radniila Jancic Hajneman, Vlastimir Trujic, Dejan Trifunovic
(Serbia)
The effects ofPHvalue andadditive on microhardness ofdecorative gold coalings obtained
from auri-mercaplotriazole 140
Milad Barzegar, Saba Gharedash (Iran)
Investigation ofdamage in the rotary three cones bit during the excavation rock- a case
study 144
Saba Gharehdash, Milad Barzegar (Iran)
Numerical models currently being developedfor use in the mining industry 148
Ali Dabbagh, AH Heydari Moghadam, Mohd Hamdi (Malaysia)
A study on the effect ofcoke particle size on thermalprofde ofthe sinters produced in
Isfahan Iron Melting Co. 152
Ana Simonovic, Marija Petrovic, Milan Radovanovic, Snezana Milic, Milan
Antonijevic (Serbia)
Electrochemical behavior ofcopper in neutral sulfate media in the presence oftwo azole
compounds 156
Dmitry Vasilyev, Alexander Udovsky (Russia)
The use ofphysical modelsfor calculating solubility and spinodal curves ofbec Fe~Cr
alloys 160
Milena Cosic, Marina Dojcinovic, Zagorka Acimovic Pavlovic (Serbia)
Cavitation behaviour ofhypereutectic Al-l8wt%Si alloy obtained by rheocastingprocess 164
Dusko Minic, Dragana Zivkovic, Milena Premovic, Dragan Manasijevic, Vladan
Cosovic (Serbia)
Mechanical and electricalproperties ofalloys and isothermal section ofternary Ag-Bi-Znsystem at 673K 168
Milena Premovic, Dusko Minic, Dragan Manasijevic, Dragana Zivkovic, Vladan
Cosovic, Ljubisa Balanovic (Serbia)
Experimental investigation and thermodynamic calculations ofthe Ag-Ga-Zn phase
diagram 172
Alejandro Cruz-Ramirez, Pedro Roman-Martinez, Ricardo Sanchez-Alvarado,Marissa Vargas-Ramirez (Mexico)
Thermodynamic assessment ofthe Cu20 in the Si02-Cu20-FeO system 176
M. Morua, Marco Ramirez-Argaez, Carlos Gonzalez-Rivera (Mexico)
Cooling curve and inverse analysis ofthe solidification ofeutectic Al-Cu 180
Marco Ramirez-A rgaez, Carlos Gonzalez-Rivera (Mexico)
Mathematical model ofdri melting kinetics in a non-reactive slag bath 184
Volodymir Bondarenko, Olha Ievdokymova, Oleksandr Matviichuk (Ukraine)Regularities the JVC and SiC dekamicron powders formation coated with Ni, Co 188
xiii
The 45"1 International October Conference on Mining and Metallurgy, 16-19 October 2013, Bor Lake, Serbia
Sandra Filipovic, Jelena Stankovic, Renata Kovacevic (Serbia)
The design ofthe pump stationfor wastes in order to enlarge the capacity of the mine Veliki
Krivelj 192_
Dragan Milanovic, Daniela Urosevic, Vedran Kostic, Bojan Drobnjakovic, Branislav
Rajkovic (Serbia)
Verification the capacity oftransport systemsfor ore at the open pit south mining district
Majdanpek ; 196
Berran Alp, Ismail Girgin (Turkey)
Synthesis ofnew zinc borate compounds using Na2B4Q7*10H2O andZnC/2 200
Marija Mihajlovic, Mirjana Stojanovic, Zorica Lopicic, Marija Petrovic, Jelena
Milojkovic, Tatjana Sostaric, Caslav Lacnjevac (Serbia)
Sustainable agriculture: obtaining Nh4- zeolite fertilizer supplement 204
Slavka Zekovic (Serbia)
Global economic challenges for sustainable development in the BOR Basin ofcopper 208
Zorica Lopicic, Mirjana Stojanovic, Marija Mihajlovic, Marija Petrovic, Jelena
Milojkovic, Tatjana Sostaric, Jelena Avdalovic (Serbia)
Waste biomass-assisting agent in apatitefertilization 212
Ana Kostov, Radisa Todorovic, Aleksandra Milosavljevic (Serbia)
Development andproduction low-alloyed copper with iron by continuous casting upward
technology 216
Radisa Todorovic, Aleksandra Milosavljevic, Ana Kostov, Ljubinka Todorovic
(Serbia)
Thermal treatment influence on mechanical properties oflow-alloyed copper with iron 220
Daniela Urosevic, Dragan Milanovic, Zoran Ilic, Vedran Kostic, Bojan Drobnjakovic
(Serbia)
Verification the capacity oftransport systemsfor waste rock at the south mining district -
Majdanpek * 223
Vladan Kasic, Zivko Sekulic, Slavica Mihajlovic, Vladimir Jovanovic, Melina
Vukadinovic (Serbia)
Geology oftravertine deposits Kraljeva gora near Milici - Serbian Republic 227
Miomir Mikic, Daniel Krzanovic, Milenko Ljubojev, Sladana Krstic, Vojka Gardic
(Serbia)
Auscultation offlotation tailings Veliki Krivelj with emphasis on the current state of
Krivelj's river collector, Serbia 23J
Miomir Mikic, Daniel Krzanovic, Radmilo Rajkovic, Daniela Urosevic (Serbia)
Potential signijicant impact on the environment ofFTRTH andflotation Bor, Serbia 235
Tatjana Apostolovski Trujic, Visa Tasic, Novica Milosevic (Serbia)
Sources ofair emissions in the BOR agglomeration 240
A. Dosic, Dragana Tomasevic, Milena Dalmacija, Bozo Dalmacija, Durda Kerkez,
Milena Becelic Tomin, Srdan Roncevic (Serbia)
Stabilisation ofwaste sludge from mine tailing 244
Durda Kerkez, Milena Becelic Tomin, Dragana Tomasevic, Milena Dalnsacija, Bozo
Dalmacija, Anita Leovac, Srdan Roncevic (Serbia)
Possibility assessment ofnative clay usage in iron ore agglomeration and solidification 248
xiv
The 45lh International October Conference on Mining and Metallurgy, 16-19 October 2013, Bor Lake, Serbia
Jelena Majstorovic, Tatjana Volkov Husovic, Snezana Savkovic, Dragana Rankovic
(Serbia)
Applaying ultrasound laboratory research in mining, civil engineering and metallury 252
Snezana Ignjatovic, Nadezda Ivanovic, Ivana Vasiljevic, Ilija Vasiljevic, Lazar Kricak
(Serbia)
The application of mathematical transformation on aeromagnetic data in order to detect
magnetic anomaly sources 256
Shehret Tilvaldyev, Alfredo Villanueva, Juan Miguel Diaz, Jorge Flores Garay(Mexico)
Parameters ofthe thermal decomposition ofsilverjarosite 260
Angelica Sanchez-Martinez, Victor H. Gutierrez Perez, Alejandro Cruz-Ramirez,
Ricardo Sanchez-AIvarado (Mexico)
Pyrometallurgical redaction ofwaste pastefrom lead acid batteries 264
Dragan Vuckovic, Vlado Gajic (BiH)
Selection ofthe optimal mode ofmining operations at the Ugljevik Istok open pit mine 269
Zoran Avramovic, Milan Antonijevic, Milos Avramovic (Serbia)
Corrosion ofconcrete in aggressive environment 273
Ndue Kanari, Eric Allain, Frederic Diot, Javier Mochdn, Ifiigo Ruiz-Bustinza, Jacques
Yvon (France)
Beneficiation ofmetallurgical slagsfor the recovery oftantalum and niobium oxides 277
Dragan Ignjatovic, Lidija Durdevac Ignjatovic, Dusan Tasic, Bosko Vukovic, Ratomir
Popovic (Serbia)
In situ determination ofshear resistance parameters oflithological member N8fromsouthern slope offield B Gracanica open pit mine 281
Milenko Ljubojev, Dragan Ignjatovic, Lidija Durdevac Ignjatovic, Dusan Tasic
(Serbia)
Probefor measuring stress-strain state in rock massif 285
Dusan Tasic, Dragan Ignjatovic, Milenko Ljubojev, Lidija Durdevac Ignjatovic
(Serbia)
Application ofthe point load test to determine the uniaxial compressive strength on rock
masses from ore deposit Borska reka 289
Biljana Jovanovic, Milana Popovic (Serbia)
Emission ofgas and solid particlesfrom the copperproduction process and their impact on
the environment 293
Paulina Hirtopanu, Sorin Silviu Udubasa, Gheorghe Udubasa (Romania)
Mineralogy ofa Romanian blastfurnace slag 297
Jie Zhou (Canada)
Investigation into offthe road tire pressure and temperature using tyresense data 301
Natasa Dordcvic, Melina Vukadinovic (Serbia)
Mechanochemical synthesis ofbarium litanate 305
Mohammed Saidi, Brahim Safi, Madjid Samar, Abdelbaki Bcmnouuah (Algeria)
Formulation and physicochemical characterization ofultra high performancefiber concrete
based ofsand dunes (UHPFC) 309
XV
The 45lh International October Conference on Mining and Metallurgy, 16-19 October 2013, Bor Lake, Serbia
Vesna Maksimovic, Anja Dosen, IHja Bobic, Milic Eric, Tatjana Volkov Husovic
(Serbia)
Cavitation erosion ofA356-fly ash composites 313
Grigory Orlov, D. Popov (Russia)
Improvement ofcold drawing and rolling oftubes 317
Alen Delic, Mirsada Oruc, Sulejman Muhamedagic, Milenko Rimac (BiH)
Properties ofaits tenitic stainless steel X15CrNiSi20-12 producedrecycling 321
Plamen Tashev, Seryozha Valkanov, Yavor Lukarski, Marina Manilova (Bulgaria)Examination offractured weldedjoint obtained through electric-resistance welding (ERW) 325
Peter Fajfar, Matevz Fazarinc, Borut Zuzek, Goran Kugler, Milan Tercelj (Slovenia)
New progress in laboratory testing ofthermalfatigue resistance 329
Ladislav Celko, Lenka Klakurkova, Martin Julis, Martina Hrckova, Jifi Svcjcar
(CzechRepublic)Formation and growth ofeutectic layers in nickel coated thick aluminium-based substrates 333
Brankica Andelic, Nevenka Petrovic, Suzana Dragulovic,
Danijela Simonovic, Branka Pesovski (Serbia)
Production ofPbOfor the analysis ofAu and Agfor cupellation 337
Boyan Boyanov, Alexander Peltekov, Vilma Petkova (Bulgaria)
Oxidizing roasting ofzinc sulphide concentrates with different iron content 341
Rodica-Mariana Ion, Irina Fierascu, Radu-Claudiu Fierascu, Constantin Radovici,Mihaela-Lucia Ion (Romania)
Roman iron ores from Covasna archaeological site 345
Radu-Claudiu Fierascu, Irina Fierascu (Romania)
Archaeometallurgical comparison between numismatic artefacs and modern coins 349
Radu-Claudiu Fierascu, Irina Fierascu, Rodica-Mariana Ion (Romania)
Non-destructive techniques applied in the archaeometrical study ofmetal artefacts 353«
Marina Dojcinovic, Olivera Eric Cekic, Dragan Rajnovic, Leposava Sidanin, Sebastian
Balos (Serbia)
The morphology of austempered ductile iron surface damaged by cavitation 357
Marius Vasilescu, Mircea Dobrescu (Romania)
Techniques infailure analysis offracture 361
Milan Cckerevac, Ljiljana Nikolic Bujauovic, Mladen Zdravkovic, Milena Tomic,Aleksandar Radeiikovic (Serbia)
Oxidation ofcopper sulphide and chalcopyrite with ferrate(VI) 365
Alexander Peltekov, Boyan Boyanov (Bulgaria)
Behavior ofarsenic in hydrometallurgical zinc production 369
Vladimir Naumov, William LeBarge, Oleg Kovin (Russia)
A new insight into origin ofthe Yukon placer gold 373
Nikola Bajic, Mihailo Mrdak, Slobodan Stojadinovic, Jasmina Pekez, Zoran
Karastojkovic, Marko Rakin, Darko Veljic (Serbia)
Masteringproduction ofcoated electrodes with a coredwire core 377
xv i
The 45' International October Conference on Milting and Metallurgy, 16-19 October 2013, Bor Lake, Serbia
Nikola Bajic, Darko Veljic, Marko Rakin, Slobodan Stojadinovic, Jasmina Pekez,
Mihajlo Mrdak (Serbia)
Mastering ofproduction offlux-cored wires-intendedfor wide layer surfacing using the epp-
procedure_
381
Radc Katana, Nikola Bajic, Slobodan Stojadinovic (Serbia)
A supplement to the research ofproperties ofbimetal materials for industrial knives 385
Zorka Buric, Obrad Aleksic, Maria Nikolic, Nenad Nikolic, Goran Brankovic,
Pantelija Nikolic (Serbia)
Structural, morphological and optical study ofnanostructured Ti02/Fe203 thickfilm 389
Dragoslav Randic (Serbia)
Some innovative approaches to thepossibility ofpreconcentrationfor coarse milledbase
metal ores 393
Mohamed El-Karmouty, Mohamed El-Wageeh, Ahmet Abd El-Aziz, Yasser El-Shayeb(Egypt)
New technique - one three-one two (13-12) - in ultimate pit limit heuristic algorithms 397
Jasmina Jovanovic, Ruzica Nikolic, Gordana Kocic, Nenad Krstic, Milena
Krsmanovic, Gordana Sredojevic Dugalic (Serbia)
Monitoring the effect ofchronic copper intoxication through indicators oflipidperoxidationin tissues ofinternal organs 401
Zoran Slovic (Serbia)
Sulfide capacity models comparison ofCaO-Al203-Si02-MgO-FeO-MnO slag 405
Victor Hugo Gutierrez Perez, Alejandro Cruz-Ramirez, Marissa Vargas Ramirez
(Mexico)
Copper drossing in lead refining with sulfur injection 411
Ildar Ilaltdinov, Vladimir Naumov (Russia)
Method ofdetermining the gold balance in the tailings cone deposits 415
Zoran Bartulovic, Dejan Todorovie, Vladan Milosevic, Branislav Ivosevic, Ivana
Jovanovic, Jelena Carapic (Serbia)
Laboratory investigation ofmixed copper sulphide and oxide minerals flotationfromCerovo ore deposit 417
Branislav Ivosevic, Dejan Todorovic, Vladan Milosevic, Zoran Bartulovic, Ivana
Jovanovic, Goran Stojic (Serbia)
The investigation ofthe rich copper oreflotation parametersfrom the Bor's pit 421
Vladan Milosevic, Branislav Ivosevic, Vladimir Jovanovic, Zoran Bartulovic, Jelena
Carapic, Ivana Porfirovic (Serbia)
Investigation ofcopper oreflotation kinetics from several Bor pit ore bodies 425
Miodrag Banjesevic (Serbia)
Geology ofthe new discovery cooper andgold area south of Bor - Timok magmatic
complex 429
Tamara Boljanac, Sanja Martinovic, Milica Vlahovic (Serbia)
Removal ofcopper, cadmium, andzinc from the mine wastewater in RTB Bor by low cost
"adsorbent fly ash 43]
The 45lh International October Conference on Mining and Metallurgy, 16-19 October 2013, Bor Lake, Serbia
Sanja Martinovic, Tamara Boljanac, Milica Vlahovic, Tatjana Volkov Husovic
(Serbia)
Anisotropy study ofrefractory concrete subjected to the thermal shock by using the surface
analysis 435
Milica Vlahovic, Sanja Martinovic, Tamara Boljanac, Sonja Milicevic (Serbia)
Adsorption properties ofTENTfly ash in removal ofcopperfrom wastewater 439
Daniel Krzanovic, Vladan Bogdanovic, Radmilo Rajkovic, Miodrag Zikic, Zoran
Vaduveskovic (Serbia)
Review ofdesignedparameters ofdrilling and blasting in the north part ofthe open pitsouth mining district in afunction ofproviding the necessary safety to the population and
facilities in the town ofMajdanpek 443
Zoran Karastojkovic, Radisa Peric, Milesa Sreckovic, Milka Jovanovic, Zoran
Janjucevic, Ratios Gajic (Serbia)
Ellipsometric measurement ofn, k, cos(S) and tan(ijj) on coldrolledstripfrom gold alloy585 447
Sonja Milicevic, Dragan Povrenovic, Vladimir Adamovic, Ivana Jovanovic (Serbia)
Zeolite - benefits and disadvantges ofusing it in a real wastewater treatments 451
Vesna Conic, Dana Stankovic, Svetlana Ivanov, Suzana Dragulovic, Zdenka StanojevicSimsic, Branka Pesovski, Vesna Krstic (Serbia)
Physicochemicalproperties of Gindusa and Tenka concentrate 455
Vladimir Pucovski, Katarina Geric (Serbia)Modeling ofHAZ in weldjoint using genetic programming 459
Anna Vyrostkova, Jozef Pecha, Ladislav Falat, Lucia Ciripova, Milan Svoboda, Viera
Homolova (Slovakia)
Investigation ofthe T24 weldcracking in water walls 463
Branislav Markovic, Dragana Zivkovic, Dragan Manasijevic, Nadezda Talijan,Miroslav Sokic (Serbia)
Phase equilibria study and characterization ofthe alloys in the Bi-Cu0.25NiO. 75 section ofthe Bi-Cu-Ni system . 467
Daniel Saramak, Anna Mrynarczykowska, Aldona Krawczykowska (Poland)
The analysis ofeffectiveness ofPolish copper oreflotation process for various level ofwater
salinity 471
Krzysztof Gargul, Piotr Jarosz, Stanistaw Malecki (Poland)
Recycling oflow zinc content waste materialsfrom iron metallurgy 475
Omid VandGhorbany, Fardis Nakhaei, Abbas Sam, Mahmood Hekmati, MajidMosavi (Iran)
Improving energy efficiency and increasing capacity ofgrinding circuits with comminution
ofthe SAG mill circulated load ; 479
Vesna Marjanovic, Dragan Milanovic, Srdana Magdalinovic, Sanja Bugarinovic,Branislav Cadenovic, Bojan Drobnjakovic (Serbia)
Characterization ofa samplefrom the deposit andesite finger in the copper mine hlajdanpek 483
Aleksandra Fvanovic, Biserka Trumic, Milorad Zrilic, Sasa Marjanovic, Vesna
Marjanovic, Jelena Petrovic (Serbia)
Optimization ofmechanical properties ofPdNi5 alloy 487
win
The 45' International October Conference on Mining and Metallurgy, 16-19 October 2013, Bor Lake, Serbia
Biserka Trumic, Aleksandra Ivanovic, Sasa Marjanovic, Lidija Gomidzelovic, Vesna
Krstic, Silvana Dimitrijevic, Vesna Marjanovic (Serbia)
Pt-Pd system: Investigation ofmechanicalproperties 491
Dragan Rajnovic, Danka Labus, Sebastijan Balos, Miroslav Dramicanin, Olivera Eric
Cekic, Leposava Sidanin (Serbia)
Influence ofwater andgaseous environments on tensile properties ofaustempered ductile
iron 495
Sebastijan Balos, Miroslav Dramicanin, Marina Dojcinovic, Dragan Rajnovic,
Leposava Sidanin, Olivera Eric Cekic, Danka Labus (Serbia)
Cavitation ofunalloyedAPImaterial in water 499
Jelena Avdalovic, Vladimir Beskoski, Snezana Zildzovic, Mirjana Stojanovic, Srdan
Miletic, Mila Ilic, Miroslav Vrvic (Serbia)
Bacterially generated H2S04from pyrite, as a leaching agent ofphosphorusfromphosphate ore 503
Vladimir Adamovic, Aleksandar Cosovic, Jelena Avdalovic, Sonja Milicevic (Serbia)
Assessment ofdust emissions from mobile equpment duringfuture exploitation oflead-zinc
orefrom the open pit mine Kizevak 507
Radisa Peric, Zoran Karastojkovic, Zorica Kovacevic, Dragoslav Guskovic (Serbia)
The effects ofaging ofgold alloysforjewelry production with Au-58,5 (wt.) % matrix 511
Iulia Jivanescu, Sorina Lupu, Claudiu Cherciu, Marius Dima (Romania)
A study on cheap andreliable semi-autonomous robot and artificial regolith mixturefor
mining tests 515
Marian Bordei, Octavian Potecasu, Florentina Potecasu, Florin Marin (Romania)
Considerations on producing thin strips from Fe-Ni alloys used in measurement and control
equipment manufacturing 519
Marin Mihaela, Potecasu Florentina, Potecasu Octavian, Bordei Marian, Marin Florin
(Romania)
Effect ofsteam treatment on the wear resistance ofsintered P/M steels.
523
Octavian Potecasu, Florentina Potecasu, Marian Bordei, Mihaela Marin (Romania)Researches on optimizing thefabrication technologiesfor the thick sheets intendedfor pipes 527
Slobodan Radosavljevic, Nikola Vukovic, Jovica Stojanovic, Aleksandar Pacevski, Ana
Radosavljevic Mihajlovic, Vladan Kasic (Serbia)
Polymetallic barite-sulfide deposit Bobija, Triassic volcanogenic-sedimentary zone ofPodrinje, Western Serbia: Mineralogy and chemism ofsulfides 531
Sladana Krstic, Vesna Ljubojev, Miomir Mikic, Milenko Jovanovic, Zoran Stojanovic(Serbia)
Sedimentological analysis ofthe clay deposit Dusanovac 535
Slavica Miletic, Dejan Bogdanovic (Serbia)
Ecological management in afunction ofmanagement ofnatural resources 539
Milenko Jovanovic, Sladana Krstic, Vesna Ljubojev, Goran Packovski (Serbia)
Bentonite clay - Tijovac - Industrial applications ' 543
Nevcnka Petrovic, Tamara Urosevic (Serbia)
The choice ofmatrix modifiersfor the determination ofarsenic by atomic spectrophotometrywith graphite finance (GFAAS) - 547
xix
The 45lh International October Conference on Mining and Metallurgy, 16-19 October 2013, Bor Lake, Serbia
Marijana Pavlov Kagadejev, Visa Tasic, Darko Brodic, Dragan Milivojevic (Serbia)
The analysis ofelectro-energetic system elements in Majdanpek copper mine 551
Aleksandra Pataric, Marija Mihailovic, Zvonko Gulisija, Zoran Janjusevic (Serbia)
Effects ofEMFon the alloying elements distribution at 7075 AI alloy 555
R. Paunova, R. Alexandrova, M. Marinov, P. Petrov (Bulgaria)
Thermodynamic offlotation waste reductionfrom copper slag 559
Nasirinezhad Ali, Heidari Mehrdad (Iran)
The Optimization and Production Scheduling on CF Copper Porphyry Deposit in IRAIV -
Case study 563
Mirjana Rajcic Vujasinovic, Vesna Grekulovic, Zoran Stevic (Serbia)
The effect ofimmersion time ofsilver and copper in a benzotriazole solution on their
electrochemical stability 568
Vesna Grekulovic, Mirjana Rajcic Vujasinovic, Zoran Stevic (Serbia)
Electrochemical characterization offourteen carat gold in an acidic medium 572
Tatiana Selivanova (Russia)
Real-time control ofcombusting area using magnetic mearsumentsfor underground coed
gasification 576
Vasko Stojanovski, Vesna Angelevska (Macedonia)
Determination ofactual static tension condition in the main dredger's carriers SRs 1300 580
Emina Pozega, Svctlana Ivanov, Zoran Stevic, Nikola Vukovic, Lidija Gomidzelovic,
Ivana Markovic (Serbia)
SEM- EDS analysis and microindentation hardness study ofn - type doped BiTeSe alloy
single crystals 584
Zorica Ljubomirovic, Zdenka Stanojevic Simsic,"Silvana Dimitrijevic, Vesna Conic,
Mirjana Steharnik (Serbia)
Review of toxity ofindium compounds 588
Dragica Jevtic, Aleksandra Mitrovic, Aleksandar Savic, Aleksandar Radevic (Serbia)Cement Composites Modeling UsingAmorphous Kaolin 592
Miroslav Sokic, Dcjan Todorovic, Velizar Stankovic, Vladislav Matkovic (Serbia)
Leachingfollowed byflotation ofoxide-sulphide copper orefor increasing overall copper
efficiency 596
Emina Pozega, Ivana Markovic, Nikola Vukovic (Serbia)
SEM- EDS analysis and microindentation hardness study ofZr doped X2Y3 (X = Hi, Sb;
y 7 e, Se ) p— type semiconductor 600
Ruzica Manojlovic, Blagoj Rizov, Jon Magdeski (Macedonia)
Mathematical modeling ofmechanical properties ofhot rolling steel sheets 604
Ruzica Manojlovic, Zagorka Koneska, Dafmka Stoevska Gogovska (Macedonia)
Analysis ofcauses offracture ofturbine regulator valve spindle 608
Branislav Radosevic (Serbia)
Possible renaissance ofcopper in Serbia 612
Bosfjan Markoli, Iztbk Naglic, Kristina Zuzek Rozman, Paul John McGuiness,
Spoinenka Kobe (Slovenia)
Magnetic shape memory effect in Ni-based alloys 616
The 45' International October Conference on Mining and Metallurgy, 16-19 October 2013, Bor Lake, Serbia
Lidija Gomidzelovic, Ana Kostov, Dragana Zivkovic, Emina Pozega, LjubisaBalanovic (Serbia)
Calculation ofthermodynamic properties in ternary Cu-Ga-Ni system 620
Yury Minaev (Russia)
Phenomena ofgrain boundaries phase transition with respect to alloys modification 623
Edis Softie, Irfet Sisic, Aldijana Mahmic (BiH)
A theoretical review on experimental measurement ofsurface properties ofpavementstructures 627
Blaz Karpe, Borut Kosec, Milan Bizjak (Slovenia)
Heat transfer parameters determination ofthe free jet melt-spinning process 631
Oleg Kurov (Israel)
Determination ofelectrode reactions on metals surface in corrosive solutions 639
Rudolf Tomanec, Milica Stefanovic, Josip Isek (Serbia)
Pellets and bricksfromfly ash as building materials 643
Ghassan S. El-Masry, Mustafa Ee-Musbahi, Otman Abughris, Faraj Alsol (Libya)
The effect ofchanging the type offilters on gas turbine parts 647
Mustafa El-Musbahi, Ghassan EI-Masry (Libya)
Fatigue stress analysis ofthe honeycomb panel structure edges andjoints 652
Vladan Cosovic, Aleksandar Cosovic, Dragana Zivkovic, Nadezda Talijan (Serbia)Silver zinc oxide electrical contact materials prepared by template method 656
Sasa Stojadinovic, Nikola Lilic, Miodrag Denic, Miodrag Zikic (Serbia)Application ofan adaptive system to predict blasting flyrock events 660
Radmilo Nikolic, Nenad Vusovic, Aleksandra Fedajev, Igor Svrkota (Serbia)
Is RTB Bor on its way out ofcrisis? 664
Dragana Bozic, Nada Strbac, Milan Gorgievski, Velizar Stankovic (Serbia)
Column adsorption ofzinc ions onto beech sawdust and wheat straw 668
Nikola Ciric, Nenad Vusovic, Vitomir Milic, Dejan Petrovic (Serbia)
Information technology and importance of3D modeling in mining 672
Vojka Gardic, Nesho Cipev, Suzana Staukovic, Radostina Hristova, Konstantin Mitov,Aleksandra Ivanovic (Serbia)
Environmental risk assessment ofthe mining industry in a transboundary region between
Bulgaria andSerbia 676
Milan Trumic, Ljubisa Andric, Maja Trumic, Milan Petrov, Anja Terzic (Serbia)
Recycling the constructing waste material 680
Vesna Conic, Mirjana Rajcic Vujasinovic, Vesna Grekulovic, Vladimir Beskoski,Vlastiinir Trujic (Serbia)
Zinc bioleaching from polymetallic tenka concentrate 686
Srba Mladenovic, Ljubica Ivanic, Dragoslav Guskovic, Sasa Marjanovic, Svetlana
Ivanov (Serbia)
Effect ofsolidification cooling rate on microslructure and hardness ofAISH2 alloy 690
Katia Draganova, Vladislava Stefanova, Biserka Luchev, Petar Iliev (Bulgaria)Sulphuric acid dissolution ofwaelz clinker waste in the presence ofsodium sulphite reducer 694
Srccko Manasijevic, Srdan Markovic, Mile Durdevic, Radymir Radisa (Serbia)
The analysis ofthe phase diagram ofaluminum piston alloys 698
xx i
The 45lh International October Conference on Mining and Metallurgy, 16-19 October 2013, Bor Lake, Serbia
Adrian Ioana, Augustin Semenescu, Cezar Florin Preda (Romania)
Environmentalprotection and electric arcfurnaces 702
Adrian Ioana, Augustin Semenescu, Cezar Florin Preda (Romania)
Quality management elementsfor steels elaboration 706
Zoran Ilic, Radomir Mijovic, Branislav Rajkovic, Vojka Gardic (Serbia)
Optimisation ofwater consuption in lime productionfacility ,,Zagradje", RTB Bor 710
Bojan Stojcetovic, Valentina Velinov (Serbia)
Potential ofrenewable energy sources in Serbia 714
Mladen Milic, Srba Mladenovic, Dragoslav Guskovic (Serbia)
Detection ofgold by ICP-AES method 718
Bojan Stojcetovic, Valentina Velinov (Serbia)
Impact ofwindpower plants on the environment, humans and economic development 722
Dejan Petrovic, Vitomir Milic, Igor Svrkota, Sasa Stojadinovic (Serbia)
Development ofthe block bottom for block mining methods 726
Grozdanka Bogdanovic, Dejan Antic, Milan Trumic, Ljubisa Andric, Maja Trumic
(Serbia)
An overview oftechnologies for spent batteries recycling 730
Dejan Antic, Grozdanka Bogdanovic, Milan Antonijevic, Velizar Stankovic (Serbia)
Comparison ofisotherms for copper ions adsorption on natural zeolite and anthracite coal 736
AH Hatab, Hassan Zaid, Abdulwahab Ibrahim (Libya)
Individual effects ofRRA design process parameters on properties of 7079 aluminum alloy-
grey based Taguchi 741
Sasa Drmanic, Dominik Brkic, Marina Stamenovic, Jasmina Nikolic, Vladimir
Pavicevie, Slavisa Putic (Serbia)
Acidic solution influence on the strain distribution in glass-polyester pipes subjected to
internal pressure 745.
Boris Rygalin, Alexey Koltsov, Lidya Pavlova, Elena Kirilenko, Vladimir Kukin,
Marie-Jose Cornu, Ser'gey Timoshenkov, Ruslan Lobus (Russia)
Study ofwetting behavior on Tailored model surfaces and the effects ofoxides 753
Dalibor Denadic, Miodrag Manic, Dejan Tanikic, Miroslav Radovanovic, Sasa
Randelovic (Serbia)
Optimization ofturning parameters using taguchi method 757
Stefan Dordievski, Tamara Urosevic, Marija Milivojevic, Valentina Janosevic, Beba
Stojanovska, Vladan Andrejic, Vesna Krstic (Serbia)
Environment and automotive catalysts 762
Igor Svrkota, Vitomir Milic, Dejan Petrovic (Serbia)
Miningmethod design in transition period forJama Bor underground mine 766
Miodrag Zikic, Dejan Tanikic, Jelena Dokovic, Sasa Stojadinovic, Dalibor Denadic,
Jasmina Petrovic (Serbia)
Simple fast-disjoint compensating clutch 770
Miroslav Sokic, Ilija Ilic, Zvonko Gulisija, Zeljko Kamberovic, Nada Strbac, Vaso
Manojlovic (Serbia)
Sources andforecasting ofnon-ferrous secondary raw materials creation 774
xxii
The 45lh International October Conference on Mining and Metallurgy, 16-19 October 2013, Bor Lake, Serbia
Ali Hatab, AbduIBaset Frefer, Iman Nima (Libya)
Trituration time effects: XRD and microhardness studies ofAg-Cu-Sn-Hg metallic dental
alloy 778_
Nada Strbac, Dorde Nikolic, Ivan Mihajlovic, Aleksandra Mitovski, Milovan Vukovic,
Predrag Dordevic, Milica Arsic (Serbia)
Arsenic removalfrom enargite concentrates: determination ofoptimal leaching conditions
by Taguchi optimization method 782
Ivan Ivanovic, Radoje Pantovic, Vcsna Jovanovic, Ana-Marija Duric (Serbia)
Peak oil and environment - the coming environmental impact 786
Vesna Jovanovic, Zoran Stojkovic, Radoje Pantovic, Ana-Marija Duric, Jelena
Vulicevic, Klaudija Milenkovic (Serbia)
Effect ofmineral spring water with Palanacki kiseljak provincial population health 790
Beba Stojanovska, Stefan Bordievski, Tamara Urosevic, Marija Milivojevic, Valentina
Janosevic (Serbia)
Effect oftemperature on catalytic activity ofthe enzyme amylase from saliva 794
Stefan Dordievski, Beba Stojanovska, Suzana Stankovic, Jelena Petrovic (Serbia)
Application ofmetallic copper electrode in potentiometric determination ofcopper(U) ions
in solution 798
Aleksandar Todic, Dejan Cikara, Tomislav Todic, Deana Cikara Anic (Serbia)
The influence ofvanadium on the properties ofXl80CrMol2-l steel castings 802
Jelena Penavin Skundric, Branko Skundric, Slavica Sladojevic (BiH)
Adsorption of nitrogen on cation-modified J3Xzeolites 806
Konstantin Mitov, Nesho Chipev, Radostina Hristova, Suzana Stankovic, Jelena
Petrovic (Bulgaria)
Strategyfor remediation ofimpaired andpointed by maining activity terrains on the
territory ofR. Serbia and R. Bulgaria 813
Zdenka Zovko Brodarac, Natalija Dolic, Jadranka Malina (Croatia)
Aficrostructural characterization ofintermetallic phases in HAZ ofMIG welded ENA W-
6060 alloy 817
Svetlana Nestorovic, Ivana Markovic, Desimir Markovic, Ljubica Ivanic (Serbia)
Microstructure changes in the cast copper-gold alloy during thermo-mechanical treatment 821
Miodrag Miljkovic, Jovica Sokolovic, Rodoljub Stanojlovic (Serbia)
Environmental protection ofdeposit areas and its economic value 825
Aleksandar Kapuran, Igor Jovanovic (Serbia)
Ruzana-new bronze age metallurgical center in north eastern Serbia 831
Vesna Njagulovic, Ankica Jeremic, Cedomir Duniitraskovic (Serbia)Production ofnon stabilized copper powder and influence ofsome important parameters 835
Marius Criveanu, Andrei Rotaru, Claudiu Nicolicescu, Marco Actis-Grande, Mario
Rosso (Romania)The effect ofGASCARBUSINTprocedure on some mechanical properties ofsintered steels 839
Biljana Dokic Milosevic, Danko Milosevic (Serbia)
The lime synchronization ofDSC and PLC systemsfor effective automation in metallurgy 840
xxm
The 45' International October Conference on Mining and Metallurgy, 16-19 October 2013, Bor Lake, Serbia
Tamara Holjevac Grguric, Mirko Gojic, Dragana Zivkovic, Ana Rostov, StjepanKozuh, Diana Cubela (Croatia)
Characterization ofCu-Al-Mn shape memory alloy 844
Ivana Ivanic, Mirko Gojic, Stjepan Kozuh, Ladislav Vrsalovic, Senka Gudic (Croatia)
Comparison ofcorrosion parametersfor CuAINi alloy in various heat treated states 848
Ivica Buljeta, Ana Beros, Ruzica Udovicic, Marina Jovanovic (BiH)
The limited valuesfor heavy and light metals in the development of internal cracks in the
aluminum billet 852
Ljubisa Balanovic, Dragana Zivkovic, Dragan Manasijevic, Nada Strbac, Ivan
Mihajlovic, Aleksandra Mitovski (Serbia)
Determination ofternary interaction coefficient in Ga-Sn-Zn system 858
AUTHOR INDEX 864
DONORS 871
xxiv