4.5″ Downlight – Round
5
FEATURES ■ Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane ■ Dim to warm from 1800K to 3000K CCT, minimum 95 CRI ■ 4 inch aperture is unobtrusive in small scale spaces ■ Die cast trim choices include flush, regressed or angled lens ■ Contemporary design provides glare-free illumination for a soft ceiling appearance ■ Fully room-side accessible SPECIFICATIONS ■ HOUSING – Die-cast aluminum trim housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing-out mounting arms field adjust for ceiling thickness from 1/2″ – 2-1/4″. ■ TRIMLOCK – Innovative TrimLock reflector retention system ensures the trim remains flush with the ceiling plane. ■ OPEN REFLECTOR – Low-iridescent anodized aluminum. Clear semi-specular finish standard. ■ LENSED TRIM – Die-cast aluminum frame with micro-prismatic, acrylic lens. ■ ELECTRICAL – High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>55,000 hours. Reported L90>55,000 hours. Estimated L70 = 200,000 hours. ■ MOUNTING – Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. Remodel kit option includes receiver bracket hardware. ■ LISTINGS – ■ cCSAus conforms to UL STD 1598; Certified to CAN/CSA STD C22.2 No. 250.0 for damp locations. LED light assembly conforms to UL 2108 for remote installation. ■ Suitable for wet location under covered ceiling when specified with WET/CC or TD options. ■ IC-rated for direct contact with insulation when specified with I Mounting Type. ■ City of Chicago Environmental Air approved when specified with CP option. ■ Complies with ASTM-E283 when specified with ATH option. ■ RoHS compliant. ■ WARRANTY – 5-year limited warranty, see hew.com/warranty. NOTES 1 Lumen output based on full light output, O trim type, W distribution and CS finish, 3500K/95CRI. Actual lumens may vary +/-5%, see page 2 for FIXTURE PERFORMANCE DATA. 2 9″ aperture, specify degrees of slope in 5° increments, 05°-30°. Not available with I Mounting Type, ATH or WET/CC options. Painted white. Other colors available, consult factory. See page 3 for SLOPED CEILING ADAPTOR DETAILS. 3 Not available with I Mounting Type. 4 Not available with EM batteries. 5 N and R Mounting Types only. Not available with ATH or IP options. 6 N and R Mounting Types only. Not available with ATH or IP options. 7 Not available with WET/CC, ATH or IP options. N and R Mounting Types only. See page 4 for EM/10W/RTS DETAILS. 8 I Mounting Type required. 9 May be required for 347V, see product builder at hew.com/product-builder. 10 Trim ships separately. 11 Beam angle based on CS or WH reflector finish. 12 Available with WW Distribution only. 13 W Distribution, OF Flange Type, WH Reflector Finish only. Standard with AD diffuse acrylic lens. IP and WET/CC options standard. 14 O and A Trim Types only. 15 For use with mud-in plaster construction only, supplied with mud flange installation kit. See page 3 for FLANGE TYPE DETAILS. Not available with ATH or IP options. 16 R Trim Type only. Not available with MWT. 17 Not available with WH Reflector Finish, L or S Trim Types. 18 L and R Trim Types only. 19 Not available with O trim type. W and WW distributions only. 20 Not available with O trim type. W and WW distributions only. 21 O Trim Type only. WET/CC standard. Not available with S Trim Type. 22 Not available with PD trim option. 23 WH and BL Reflector Finishes only. 24 Mounting hardware required (N and I only), ordered separately, see MOUNTING HARDWARE ordering info. See page 4 for MOUNTING TYPE DETAILS. 25 Additional mounting hardware options available. SEE PAGE 5 FOR MOUNTING HARDWARE DETAILS. 26 L8 and L15 lumen packages only. 27 Also used in new construction sheetrock ceilings. 28 N and I Mounting Types only. I Mounting requires external brackets. 29 N Mounting Type only. 30 N Mounting Type only. ORDERING EXAMPLE: 4DR - TL - L24/9DW - OPTIONS - DIM1 - UNV - OW - OF - CS - TRIM OPTIONS - N - F1 HOUSING TRIM MOUNT. HOUSING SERIES LUMENS [1] COLOR OPTIONS CONTROL VOLTAGE 4DR - TL TrimLock L8 800lm L15 1,500lm L24 2,400lm 9DW Dim to warm (95 CRI, 1800K – 3000K) SCA_ _ Sloped ceiling adapter [2] ATH Airtight construction F Fuse DIM1 1% dimming driver (0- 10V signal to control dimming and CCT) LUT Lutron Ecosystem enabled [3] UNV 120-277V 347 347V [4] EM/7W 7-watt emergency battery [5] EM/10W 10-watt emergency battery [6] EM/10W/RTS 10-watt emergency battery with regressed test switch [7] CP Chicago plenum (CCEA) [8] SDT Stepdown transformer [9] TRIM [10] TRIM TYPE DISTRIBUTION [11] FLANGE TYPE REFLECTOR FINISH TRIM OPTIONS O Open reflector L Flush lens R Regressed lens A Angled lens [12] S Non-conductive flush lens for shower applications [13] W Wide 65° Open 50° Flush 50° Regressed M Medium 45° Open 35° Flush 30° Regressed N Narrow 10° Open 25° Flush 25° Regressed WW Wall wash [14] OF 1/2″ standard flange SF 1/4″ mud-in flange [15] Open trim types CS Clear semi-specular anodize SG Satin-glow anodize GD Gold anodize CG Champagne gold anodize PW Pewter anodize SPC Clear specular anodize RG Rose gold anodize WH White texture powder coat BL Black texture powder coat Lens trim types CS Clear semi-specular powder coat WH White texture powder coat BL Black texture powder coat MB Black texture splay with white flange [16] MWT Textured white trim flange [17] IP IP65 rated trim [18] AD Diffuse acrylic lens [19] PD Diffuse 1/8″ polycarbonate lens [20] TD Diffuse polycarbonate lens media at top of open reflector [21] WET/CC Wet location, covered ceiling listed [22] AM Anti-microbial [23] MOUNTING MOUNTING TYPE [24] MOUNTING HARDWARE [25] N Open pan for new construction I IC-rated enclosure for new construction [26] R Remodel kit [27] F1 Integral 2-position fixed pan bracket, universal bar hanger included [28] BA1 Adjustable butterfly pan bracket, bar hanger not included [29] CA1 Adjustable caterpillar pan bracket, universal bar hanger included [30] NEW CONSTRUCTION AND REMODEL CATALOG #: ������������������������������������������������ TYPE: ������������������������������������������������������ PROJECT: ��������������������������������������������������� ø4-1/2″ 5-3/4″ 1/2″ min 2-1/4″ max 15″ H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USA Information contained herein is subject to change without notice. Downlights Page 1 of 5 4DR 4.5″ Downlight – Round REV.12/22/21.70712.LA
Transcript of 4.5″ Downlight – Round
FEATURES
■ Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane
■ Dim to warm from 1800K to 3000K CCT, minimum 95 CRI
■ 4 inch aperture is unobtrusive in small scale spaces
■ Die cast trim choices include flush, regressed or angled lens
■ Contemporary design provides glare-free illumination for a soft ceiling appearance
■ Fully room-side accessible
SPECIFICATIONS ■ HOUSING – Die-cast aluminum trim
housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing-out mounting arms field adjust for ceiling thickness from 1/2″ – 2-1/4″.
■ TRIMLOCK – Innovative TrimLock reflector retention system ensures the trim remains flush with the ceiling plane.
■ OPEN REFLECTOR – Low-iridescent anodized aluminum. Clear semi-specular finish standard.
■ LENSED TRIM – Die-cast aluminum frame with micro-prismatic, acrylic lens.
■ ELECTRICAL – High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>55,000 hours. Reported L90>55,000 hours. Estimated L70 = 200,000 hours.
■ MOUNTING – Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. Remodel kit option includes receiver bracket hardware.
■ LISTINGS – ■ cCSAus conforms to UL STD 1598; Certified
to CAN/CSA STD C22.2 No. 250.0 for damp locations. LED light assembly conforms to UL 2108 for remote installation.
■ Suitable for wet location under covered ceiling when specified with WET/CC or TD options.
■ IC-rated for direct contact with insulation when specified with I Mounting Type.
■ City of Chicago Environmental Air approved when specified with CP option.
■ Complies with ASTM-E283 when specified with ATH option.
■ RoHS compliant. ■ WARRANTY – 5-year limited warranty, see
hew.com/warranty.
NOTES1 Lumen output based on full light output, O trim type, W distribution
and CS finish, 3500K/95CRI. Actual lumens may vary +/-5%, see page 2 for FIXTURE PERFORMANCE DATA.
2 9″ aperture, specify degrees of slope in 5° increments, 05°-30°. Not available with I Mounting Type, ATH or WET/CC options. Painted white. Other colors available, consult factory. See page 3 for SLOPED CEILING ADAPTOR DETAILS.
3 Not available with I Mounting Type.4 Not available with EM batteries.5 N and R Mounting Types only. Not available with ATH or IP options.6 N and R Mounting Types only. Not available with ATH or IP options.7 Not available with WET/CC, ATH or IP options. N and R Mounting
Types only. See page 4 for EM/10W/RTS DETAILS.8 I Mounting Type required.9 May be required for 347V, see product builder at
hew.com/product-builder.1 0 Trim ships separately.1 1 Beam angle based on CS or WH reflector finish.1 2 Available with WW Distribution only.1 3 W Distribution, OF Flange Type, WH Reflector Finish only. Standard
with AD diffuse acrylic lens. IP and WET/CC options standard.1 4 O and A Trim Types only.
1 5 For use with mud-in plaster construction only, supplied with mud flange installation kit. See page 3 for FLANGE TYPE DETAILS. Not available with ATH or IP options.
1 6 R Trim Type only. Not available with MWT.1 7 Not available with WH Reflector Finish, L or S Trim Types.1 8 L and R Trim Types only.1 9 Not available with O trim type. W and WW distributions only.2 0 Not available with O trim type. W and WW distributions only.2 1 O Trim Type only. WET/CC standard. Not available with S Trim Type. 2 2 Not available with PD trim option.2 3 WH and BL Reflector Finishes only.2 4 Mounting hardware required (N and I only), ordered separately,
see MOUNTING HARDWARE ordering info. See page 4 for MOUNTING TYPE DETAILS.
2 5 Additional mounting hardware options available. SEE PAGE 5 FOR MOUNTING HARDWARE DETAILS.
2 6 L8 and L15 lumen packages only.2 7 Also used in new construction sheetrock ceilings.2 8 N and I Mounting Types only. I Mounting requires external brackets.2 9 N Mounting Type only.3 0 N Mounting Type only.
ORDERING EXAMPLE: 4DR - TL - L24/9DW - OPTIONS - DIM1 - UNV - OW - OF - CS - TRIM OPTIONS - N - F1 HOUSING TRIM MOUNT.
HOUSING SERIES LUMENS [ 1 ] COLOR OPTIONS CONTROL VOLTAGE4DR - TLTrimLock
L8 800lmL15 1,500lmL24 2,400lm
9DW Dim to warm (95 CRI, 1800K – 3000K)
SCA_ _ Sloped ceiling adapter [ 2 ]
ATH Airtight construction F Fuse
DIM1 1% dimming driver (0-10V signal to control dimming and CCT)
LUT Lutron Ecosystem enabled [ 3 ]
UNV 120-277V347 347V [4 ]
EM/7W 7-watt emergency battery [ 5 ]
EM/10W 10-watt emergency battery [6 ]
EM/10W/RTS 10-watt emergency battery with regressed test switch [ 7 ]
CP Chicago plenum (CCEA) [ 8 ]
SDT Stepdown transformer [ 9 ]
TRIM [ 1 0]
TRIM TYPE DISTRIBUTION [ 1 1 ] FLANGE TYPE REFLECTOR FINISH TRIM OPTIONSO Open reflectorL Flush lensR Regressed lensA Angled lens [ 1 2 ]
S Non-conductive flush lens for shower applications [ 1 3 ]
W Wide 65° Open 50° Flush 50° RegressedM Medium 45° Open 35° Flush 30° RegressedN Narrow 10° Open 25° Flush 25° RegressedWW Wall wash [ 1 4 ]
OF 1/2″ standard flange
SF 1/4″ mud-in flange [ 1 5 ]
Open trim typesCS Clear semi-specular
anodizeSG Satin-glow anodizeGD Gold anodizeCG Champagne gold anodizePW Pewter anodizeSPC Clear specular anodizeRG Rose gold anodize WH White texture powder coat BL Black texture powder coat
Lens trim typesCS Clear semi-specular
powder coatWH White texture powder coat BL Black texture powder coatMB Black texture splay with
white flange [ 1 6 ]
MWT Textured white trim flange [ 1 7 ]
IP IP65 rated trim [ 1 8 ] AD Diffuse acrylic lens [ 1 9 ]
PD Diffuse 1/8″ polycarbonate lens [ 2 0 ]
TD Diffuse polycarbonate lens media at top of open reflector [ 2 1 ]
WET/CC Wet location, covered ceiling listed [ 2 2 ]
AM Anti-microbial [ 2 3 ]
MOUNTINGMOUNTING TYPE [ 2 4] MOUNTING HARDWARE [ 2 5 ] N Open pan for new constructionI IC-rated enclosure for new construction [ 2 6 ]
R Remodel kit [ 2 7 ]
F1 Integral 2-position fixed pan bracket, universal bar hanger included [ 2 8 ]
BA1 Adjustable butterfly pan bracket, bar hanger not included [ 2 9]
CA1 Adjustable caterpillar pan bracket, universal bar hanger included [ 3 0 ]
NEW CONSTRUCTION AND REMODEL
CATALOG #: ������������������������������������������������
TYPE: ������������������������������������������������������
PROJECT: ���������������������������������������������������ø4-1/2″
5-3/4″
1/2″ min2-1/4″ max
15″
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 1 of 5
4DR 4.5″ Downlight – Round
REV.12/22/21.70712.LA
FIXTURE PERFORMANCE DATAOPEN REFLECTOR FLUSH LENS REGRESSED LENS
CCT AT 100% (FULL OUTPUT)
CCT AT 1% (FULL DIM) DIST. WATTAGE DELIVERED
LUMENSEFFICACY
(lm/W)DELIVERED
LUMENSEFFICACY
(lm/W)DELIVERED
LUMENSEFFICACY
(lm/W)
L8
3000K 1800K
W 14.0 862 61.6 670 47.9 678 48.4M 14.0 830 59.3 760 54.3 763 54.5N 14.0 800 57.1 765 54.7 769 54.9
L15
W 23.4 1511 64.6 1175 50.3 1188 50.8M 23.4 1455 62.3 1333 57.0 1337 57.2N 23.4 1402 60.0 1242 57.4 1348 57.7
L24 W 37.7 2228 59.1 1925 51.1 1945 51.6
M 37.7 2226 59.0 1995 52.9 1997 52.9N 37.7 2228 59.1 2197 58.3 2208 58.6
1 Distribution will also be affected, consult factory.2 Use multiplier when specified with O Trim Type.
■ Photometrics tested in accordance with IESNA LM-79. Results shown are based on 25ºC ambient temperature. ■ Wattage shown is based on 120V input. ■ Results based on 3000K, 95 CRI, full output, actual lumens may vary +/-5% ■ Use multiplier table to calculate additional options.
MULTIPLIER TABLESREFLECTOR FINISH
CATALOG NUMBER
CONVERSION FACTOR
O TR
IM
CS 1.00SG 1 0.92GD 0.93CG 0.96PW 0.86SPC 1.02RG 0.88
WH 1 0.89BL 1 0.47
R TRI
M WH 1.00CS 0.98BL 0.79
TRIM
CATALOG NUMBER
CONVERSION FACTOR
S 0.85AD 0.85PD 0.85TD 0.75
WET/CC 2 0.85
6000
4000 30002500
2000 1500
PHOTOMETRY4DR-TL-L24/9DW-DIM1-UNV-OW-OF-CS Total Luminaire Output: 2228 lumens; 37.7 Watts | Efficacy: 59.1 lm/W | 95.0 CRI; 3604K CCT
90°
0° 20°
40°
80°
60°
0°
CAND
LEPO
WER D
ISTRI
BUTIO
N
VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0°0 20115 2071 19815 2178 61725 2479 114735 341 21545 49 3855 12 1165 1 175 0 085 0 090 0
LUME
N SU
MMAR
Y
ZONE LUMENS % FIXTURE
0 - 40 2176 980 - 60 2226 1000 - 90 2228 1000-180 2228 100
WIDE MEDIUM NARROW WALL WASH ANGLED WALL WASH
OPEN
65° 45° 10°
FLUS
H
50° 35° 25°
REGR
ESSE
D
50° 30° 25°
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 2 of 5
4DR 4.5″ Downlight – Round
REV.12/22/21.70712.LA
TRIMLOCK DETAILSTWIST PULL RELEASE
SLOPED CEILING ADAPTOR DETAILS
A
ø9″Ceiling cutout: ø9-3/8″
A (HEIGHT) PLENUM HEIGHT5° 10° 15° 20° 25° 30°
8-13/16″ 8-15/16″ 9″ 8-15/16″ 8-7/8″ 8-11/16″ 9-1/4″15° Shown
TRIM TYPE DETAILSOPEN OPEN (WALL WASH) FLUSH SHOWER ANGLED REGRESSED
ø4-1/2″ ø4-1/2″ ø4-1/4″ 1/8″ ø4-1/4″ 1/8″ ø4-1/4″ 1/8″ ø4-3/8″ 1/8″
1-1/4″
FLANGE TYPE DETAILS1/2″ STANDARD 1/4″ MUD-IN MUD FLANGE MOUNTING KIT (SLIM FLANGE TYPE)
ø5-1/2″
Ceiling Cutout: ø5″
ø5″Ceiling cutout: ø5-1/2″
1/2″1/8″
ø8″ø5-3/16″
REFLECTOR FINISH DETAILSSPC Clear specular
SG Satin-glow
PW Pewter
GD Gold
CG Champagne gold
RG Rose gold
CS Clear semi-specular
WH White
BL Black
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 3 of 5
4DR 4.5″ Downlight – Round
REV.12/22/21.70712.LA
MOUNTING TYPE DETAILSNEW CONSTRUCTION IC-RATED REMODEL
15″
12″
ø5″6″
4-1/4″
B
C
A
D
LENGTHLUMENS A B C D E F
L8 15-3/16″ 16″ 6-3/8″ 12-1/8″ 9-1/2″ 6-1/16″L15 16-5/8″ 17-1/2″ 7-7/8″ 14″ 10-1/4″ 7″
ø5″
E
F
Cross Section
ø4-1/2″
5-3/4″
Receiver Bracket
3-1/4″
2-3/4″
6-5/8″ 1-1/8″ minspace
Ceilingcutout
Driver and Junction Box
6-15/16″
4-1/8″
5-1/4″
EM/10W/RTS DETAILS
Shown Installed
Test buttonfrom EM Driver
RTS trim nut
RTS trim washer
RTS trim
RTS TRIM CUTOUT (Outside pan boundary) Downlight cutout
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 4 of 5
4DR 4.5″ Downlight – Round
REV.12/22/21.70712.LA
MOUNTING HARDWARE DETAILS
F1 Factory-installed 2-position fixed pan bracket, universal bar hanger included, ships uninstalled
BA1 Adjustable butterfly pan bracket, bar hanger not included (N Mounting Type only)
CA1 Adjustable caterpillar pan bracket, universal bar hanger included (N Mounting Type only)
Mounts to t-bar or nailer bar
14″ minimum24″ maximum
Mounts to t-bar or nailer bar
14″ minimum24″ maximum
BA2 Adjustable butterfly pan bracket, heavy-duty universal bar hanger included (N Mounting Type only)
CA2 Adjustable caterpillar pan bracket, t-bar hanger included (N Mounting Type only)
14″ minimum24″ maximum Mounts to t-bar
or nailer bar
F1 with I Mounting Type
Mounts to t-bar or nailer bar
12″ minimum24″ maximum
Mounts to t-bar
11″ minimum26″ maximum
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 5 of 5
4DR 4.5″ Downlight – Round
REV.12/22/21.70712.LA
