4.5″ Downlight – Round · 0-90 1281 100 0-180 1281 100 H.E. Williams, Inc. Carthage, Missouri...
6
ORDERING EXAMPLE: 4DR - TL - L13/8TW - OPTIONS - DIM - UNV - OW - OF - CS - TRIM OPTIONS - N - F1 HOUSING TRIM MOUNT. HOUSING SERIES LUMENS [1] COLOR OPTIONS CONTROL VOLTAGE 4DR-TL TrimLock L13 1,300lm L22 2,200lm 8TW Tunable white (80 CRI, 2700K-5000K) EM/7W 7-watt emergency battery [2] EM/10W 10-watt emergency battery [3] EM/10W/RTS 10-watt emergency battery with regressed test switch [4] SCA_ _ Sloped ceiling adapter [5] ATH Airtight construction F Fuse kit CP Chicago plenum (CCEA) [6] TC Adjustable mounting arms for 1-1/2″ – 2-1/4″ thick ceilings DALI Driver prewired for DALI applications DIM Dimming driver with (1) 0-10V signal to control dimming and (1) 0-10V signal to control CCT DMX Driver prewired for DMX applications PSQ Lutron T-Series 2-channel tunable white 1%. UNV 120-277V TRIM [7] TRIM TYPE DISTRIBUTION [8] FLANGE TYPE REFLECTOR FINISH TRIM OPTIONS O Open reflector L Flush lens R Regressed lens A Angled lens [9] S Non-conductive flush lens for shower applications [10] W Wide 65° Open 50° Flush 50° Regressed M Medium 45° Open 35° Flush 30° Regressed N Narrow 10° Open 25° Flush 25° Regressed WW Wall wash [11] OF 1/2″ standard flange SF 1/4″ mud-in flange [12] Open trim types CS Clear semi-specular anodize SG Satin-glow anodize GD Gold anodize CG Champagne gold anodize PW Pewter anodize SPC Clear specular anodize RG Rose gold anodize WH White texture powder coat BL Black texture powder coat Lens trim types MWT Textured white trim flange [13] IP IP65 rated trim [14] AD Diffuse acrylic lens [15] PD Diffuse 1/8″ polycarbonate lens [16] TD Diffuse polycarbonate lens media at top of open reflector [17] WET/CC Wet location, covered ceiling listed AM Anti-microbial [18] CS Clear semi-specular powder coat WH White texture powder coat BL Black texture powder coat MB Black texture splay with white flange [19] MOUNTING MOUNTING TYPE [20] MOUNTING HARDWARE [21] N Open pan for new construction I IC-rated enclosure for new construction R Remodel kit [22] F1 Integral 2-position fixed pan bracket, universal bar hanger included [23] BA1 Adjustable butterfly pan bracket, bar hanger not included [24] CA1 Adjustable caterpillar pan bracket, universal bar hanger included [25] FEATURES ■ Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane ■ Tunable white from 2700K to 5000K CCT, minimum 80 CRI ■ Beam angles ranging from 10º narrow to 65º wide for tailored performance ■ Die cast trim choices include flush, regressed or angled lens ■ Contemporary design provides glare-free illumination for a soft ceiling appearance ■ Fully room-side accessible SPECIFICATIONS ■ HOUSING – Die-cast aluminum trim housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing-out mounting arms adjust for ceiling thickness from 1/2″ - 1-7/16″ (see options for additional ceiling thicknesses). ■ TRIMLOCK – Innovative TrimLock reflector retention system ensures the trim remains flush with the ceiling plane. ■ OPEN REFLECTOR – Low-iridescent anodized aluminum. Clear semi-specular finish standard. ■ LENSED TRIM – Die-cast aluminum frame with micro-prismatic, tempered glass lens. ■ ELECTRICAL – High-performance Class 2 LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>50,000 hours. Tunable White products use LEDs of multiple CCTs and may produce a perceptibly different shade of white from single-CCT products at the same CCT. All CCTs are within 3 MacAdam ellipses. ■ MOUNTING – Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. Remodel kit option includes receiver bracket hardware. ■ LISTINGS – ■ cCSAus conforms to UL STD 1598; Certified to CAN/CSA STD C22.2 No. 250.0 for damp locations. LED light assembly conforms to UL 2108 for remote installation. ■ Suitable for wet location under covered ceiling when specified with WET/CC or TD options. ■ IC-rated for direct contact with insulation when specified with I Mounting Type. ■ City of Chicago Environmental Air approved when specified with CP option. ■ Complies with ASTM-E283 when specified with ATH option. ■ RoHS compliant. ■ WARRANTY – 5-year limited warranty, see hew.com/warranty. NOTES 1 Lumen output based on O trim type, W distribution and CS finish, 4000K/80CRI. Actual lumens may vary +/-5%, see page 2 for FIXTURE PERFORMANCE DATA. 2 N and R Mounting Types only. 3 N and R Mounting Types only. 4 Not available with WET/CC, ATH or IP options. N and R Mounting Types only. See page 5 for EM/10W/RTS DETAILS. 5 9″ aperture, specify degrees of slope in 5° increments, 05°-30°. See page 4 for SLOPED CEILING ADAPTOR DETAILS. Not available with ATH or TC options. N Mounting Type only. Not available with WET/CC. 6 I Mounting Type required. 7 Trim ships separately. 8 Beam angle based on CS or WH reflector finish. 9 Available with WW Distribution only. 10 W Distribution, OF Flange Type, WH Reflector Finish only. Standard with AD diffuse acrylic lens. IP and WET/CC options standard. 11 O and A Trim Types only. 12 For use with mud-in plaster construction only, supplied with mud flange installation kit. See page 4 for FLANGE TYPE DETAILS. Not available with ATH or IP options. 13 Not available with WH Reflector Finish, L or S Trim Types. 14 L and R Trim Types only. 15 Not available with O trim type. W distribution only. 16 Not available with O trim type. W distribution only. 17 O Trim Type only. WET/CC standard. 18 WH and BL Reflector Finishes only. Not available with S Trim Type. 19 R Trim Type only. Not available with MWT. 20 Mounting hardware required (N and I only), ordered separately, see MOUNTING HARDWARE ordering info. See page 5 for MOUNTING TYPE DETAILS. 21 Additional mounting hardware options available. See page 5 for MOUNTING TYPE DETAILS. 22 Also used in new construction sheetrock ceilings. 23 N and I Mounting Types only. 24 N Mounting Type only. 25 N Mounting Type only. NEW CONSTRUCTION AND REMODEL CATALOG #: ������������������������������������������������ TYPE: ������������������������������������������������������ PROJECT: ��������������������������������������������������� 1/2″ min 1-7/16″ max 15″ ø4-1/2″ 5-3/4″ H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USA Information contained herein is subject to change without notice. Downlights Page 1 of 6 HEW.70714.LA REV.04/24/20 4DR 4.5″ Downlight – Round
Transcript of 4.5″ Downlight – Round · 0-90 1281 100 0-180 1281 100 H.E. Williams, Inc. Carthage, Missouri...
ORDERING EXAMPLE: 4DR - TL - L13/8TW - OPTIONS - DIM - UNV - OW - OF - CS - TRIM OPTIONS - N - F1 HOUSING TRIM MOUNT.
HOUSING SERIES LUMENS [ 1 ] COLOR OPTIONS CONTROL VOLTAGE4DR-TLTrimLock
L13 1,300lmL22 2,200lm
8TW Tunable white (80 CRI, 2700K-5000K)
EM/7W 7-watt emergency battery [ 2 ]
EM/10W 10-watt emergency battery [ 3 ]
EM/10W/RTS 10-watt emergency battery with regressed test switch [4 ]
SCA_ _ Sloped ceiling adapter [ 5 ]
ATH Airtight constructionF Fuse kitCP Chicago plenum
(CCEA) [6 ]
TC Adjustable mounting arms for 1-1/2″ – 2-1/4″ thick ceilings
DALI Driver prewired for DALI applications
DIM Dimming driver with (1) 0-10V signal to control dimming and (1) 0-10V signal to control CCT
DMX Driver prewired for DMX applications
PSQ Lutron T-Series 2-channel tunable white 1%.
UNV 120-277V
TRIM [7 ]
TRIM TYPE DISTRIBUTION [8 ] FLANGE TYPE REFLECTOR FINISH TRIM OPTIONSO Open reflectorL Flush lensR Regressed lensA Angled lens [ 9 ]
S Non-conductive flush lens for shower applications [ 1 0 ]
W Wide 65° Open 50° Flush 50° RegressedM Medium 45° Open 35° Flush 30° RegressedN Narrow 10° Open 25° Flush 25° RegressedWW Wall wash [ 1 1 ]
OF 1/2″ standard flange
SF 1/4″ mud-in flange [ 1 2 ]
Open trim typesCS Clear semi-specular anodizeSG Satin-glow anodizeGD Gold anodizeCG Champagne gold anodizePW Pewter anodizeSPC Clear specular anodizeRG Rose gold anodize WH White texture powder coat BL Black texture powder coat
Lens trim types
MWT Textured white trim flange [ 1 3 ]
IP IP65 rated trim [ 1 4 ]
AD Diffuse acrylic lens [ 1 5 ]
PD Diffuse 1/8″ polycarbonate lens [ 1 6 ]
TD Diffuse polycarbonate lens media at top of open reflector [ 1 7 ]
WET/CC Wet location, covered ceiling listed
AM Anti-microbial [ 1 8 ]
CS Clear semi-specular powder coatWH White texture powder coat BL Black texture powder coatMB Black texture splay with white flange [ 1 9 ]
MOUNTINGMOUNTING TYPE [ 2 0] MOUNTING HARDWARE [ 2 1 ] N Open pan for new constructionI IC-rated enclosure for new construction R Remodel kit [ 2 2 ]
F1 Integral 2-position fixed pan bracket, universal bar hanger included [ 2 3 ]
BA1 Adjustable butterfly pan bracket, bar hanger not included [ 2 4 ]
CA1 Adjustable caterpillar pan bracket, universal bar hanger included [ 2 5 ]
FEATURES
■ Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane
■ Tunable white from 2700K to 5000K CCT, minimum 80 CRI
■ Beam angles ranging from 10º narrow to 65º wide for tailored performance
■ Die cast trim choices include flush, regressed or angled lens
■ Contemporary design provides glare-free illumination for a soft ceiling appearance
■ Fully room-side accessible
SPECIFICATIONS ■ HOUSING – Die-cast aluminum trim
housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing-out mounting arms adjust for ceiling thickness from 1/2″ - 1-7/16″ (see options for additional ceiling thicknesses).
■ TRIMLOCK – Innovative TrimLock reflector retention system ensures the trim remains flush with the ceiling plane.
■ OPEN REFLECTOR – Low-iridescent anodized aluminum. Clear semi-specular finish standard.
■ LENSED TRIM – Die-cast aluminum frame with micro-prismatic, tempered glass lens.
■ ELECTRICAL – High-performance Class 2 LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>50,000 hours. Tunable White products use LEDs of multiple CCTs and may produce a perceptibly different shade of white from single-CCT products at the same CCT. All CCTs are within 3 MacAdam ellipses.
■ MOUNTING – Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. Remodel kit option includes receiver bracket hardware.
■ LISTINGS – ■ cCSAus conforms to UL STD 1598; Certified
to CAN/CSA STD C22.2 No. 250.0 for damp locations. LED light assembly conforms to UL 2108 for remote installation.
■ Suitable for wet location under covered ceiling when specified with WET/CC or TD options.
■ IC-rated for direct contact with insulation when specified with I Mounting Type.
■ City of Chicago Environmental Air approved when specified with CP option.
■ Complies with ASTM-E283 when specified with ATH option.
■ RoHS compliant. ■ WARRANTY – 5-year limited warranty, see
hew.com/warranty.
NOTES1 Lumen output based on O trim type, W
distribution and CS finish, 4000K/80CRI. Actual lumens may vary +/-5%, see page 2 for FIXTURE PERFORMANCE DATA.
2 N and R Mounting Types only.3 N and R Mounting Types only.4 Not available with WET/CC, ATH or IP
options. N and R Mounting Types only. See page 5 for EM/10W/RTS DETAILS.
5 9″ aperture, specify degrees of slope in 5° increments, 05°-30°. See page 4 for SLOPED CEILING ADAPTOR DETAILS. Not available with ATH or TC options. N Mounting Type only. Not available with WET/CC.
6 I Mounting Type required.7 Trim ships separately.8 Beam angle based on CS or WH reflector
finish.9 Available with WW Distribution only.1 0 W Distribution, OF Flange Type, WH
Reflector Finish only. Standard with AD diffuse acrylic lens. IP and WET/CC options standard.
1 1 O and A Trim Types only.1 2 For use with mud-in plaster construction
only, supplied with mud flange installation kit. See page 4 for FLANGE TYPE DETAILS. Not available with ATH or IP options.
1 3 Not available with WH Reflector Finish, L or S Trim Types.
1 4 L and R Trim Types only.1 5 Not available with O trim type. W
distribution only.1 6 Not available with O trim type. W
distribution only.1 7 O Trim Type only. WET/CC standard.1 8 WH and BL Reflector Finishes only. Not
available with S Trim Type.1 9 R Trim Type only. Not available with MWT.2 0 Mounting hardware required (N and I
only), ordered separately, see MOUNTING HARDWARE ordering info. See page 5 for MOUNTING TYPE DETAILS.
2 1 Additional mounting hardware options available. See page 5 for MOUNTING TYPE DETAILS.
2 2 Also used in new construction sheetrock ceilings.
2 3 N and I Mounting Types only.2 4 N Mounting Type only.2 5 N Mounting Type only.
NEW CONSTRUCTION AND REMODEL
CATALOG #: ������������������������������������������������
TYPE: ������������������������������������������������������
PROJECT: ���������������������������������������������������1/2″ min
1-7/16″ max15″
ø4-1/2″
5-3/4″
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 1 of 6HEW.70714.LA REV.04/24/20
4DR 4.5″ Downlight – Round
FIXTURE PERFORMANCE DATA OPEN REFLECTOR TRIM TYPE
DISTRIBUTION DELIVERED LUMENS WATTAGE EFFICACY (lm/W)
L13
W 1283 14.6 87.9M 1281 14.6 87.7N 1283 14.6 87.9
L22 W 2289 24.0 95.2
M 2198 24.0 91.4N 2097 24.0 87.2
FLUSH LENS TRIM TYPEDISTRIBUTION DELIVERED LUMENS WATTAGE EFFICACY (lm/W)
L13
W 1029 14.6 70.7M 1148 14.6 78.6N 1175 14.6 80.7
L22 W 1781 24.0 74.0
M 2020 24.0 84.0N 2033 24.0 84.5
6000
4000 30002500
REGRESSED LENS TRIM TYPEDISTRIBUTION DELIVERED LUMENS WATTAGE EFFICACY (lm/W)
L13
W 1040 14.6 71.4M 1149 14.6 78.7N 1181 14.6 81.1
L22 W 1799 24.0 74.8
M 2026 24.0 84.3N 2043 24.0 84.9
■ Photometrics tested in accordance with IESNA LM-79. Results shown are based on 25ºC ambient temperature.
■ Wattage shown is based on 120V input. ■ Results based on 4000K, 80 CRI, actual lumens may vary +/-5% ■ Use multiplier tables to calculate additional options.
MULTIPLIER TABLESCOLOR TEMPERATURE
CCT LUMENS WATTS2700K 0.83 1.033000K 1.00 1.003500K 0.99 0.994000K 1.00 1.005000K 0.98 1.03
REFLECTOR FINISHCATALOG NUMBER
CONVERSION FACTOR
O TR
IM
CS 1.00SG 1 0.92GD 0.93CG 0.96PW 0.86SPC 1.02RG 0.88
WH 1 0.89BL 1 0.47
R TRI
M WH 1.00CS 0.98BL 0.79
TRIM
CATALOG NUMBER
CONVERSION FACTOR
S 0.85AD 0.85PD 0.85TD 0.75
WET/CC 2 0.851 Distribution will also be
affected, consult factory.2 Use multiplier when
specified with O Trim Type.
PHOTOMETRY4DR-TL-L13/8TW-DIM-UNV-OW-OF-CS Total Luminaire Output: 1283 lumens; 14.6 Watts | Efficacy: 87.9 lm/W | 80.0 CRI; 4037K CCT
90°
0° 20°
40°
80°
60°
0°
CAND
LEPO
WER D
ISTRI
BUTIO
N
VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0º0 11585 1193 11415 1254 35625 1428 66035 196 12445 28 2255 7 665 1 175 0 085 0 090 0
LUME
N SU
MMAR
Y
ZONE LUMENS % FIXTURE
0 - 40 1254 980 - 60 1283 1000 - 90 1283 1000-180 1283 100
4DR-TL-L13/8TW-DIM-UNV-OM-OF-CS Total Luminaire Output: 1281 lumens; 14.6 Watts | Efficacy: 87.7 lm/W | 80.0 CRI; 4037K CCT90°
0° 20°
40°
80°
60°
0°
CAND
LEPO
WER D
ISTRI
BUTIO
N
VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0º0 25935 2566 22215 1480 42425 1146 49535 100 11445 23 1855 5 565 1 175 0 085 0 090 0
LUME
N SU
MMAR
Y
ZONE LUMENS % FIXTURE
0-40 1256 980-60 1279 1000-90 1281 1000-180 1281 100
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 2 of 6HEW.70714.LA REV.04/24/20
4DR 4.5″ Downlight – Round
4DR-TL-L13/8TW-DIM-UNV-ON-OF-CS Total Luminaire Output: 1283 lumens; 14.6 Watts | Efficacy: 87.9 lm/W | 80.0 CRI; 4037K CCT90°
0° 20°
40°
80°
60°
0°
CAND
LEPO
WER D
ISTRI
BUTIO
N
VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0º0 136385 6842 49715 1518 42525 584 28535 57 6845 6 555 1 265 1 175 0 085 0 090 0
LUME
N SU
MMAR
Y
ZONE LUMENS % FIXTURE
0-40 1275 990-60 1282 1000-90 1283 1000-180 1283 100
4DR-TL-L13/8TW-DIM-UNV-OWW-OF-CS Total Luminaire Output: 724 lumens; 14.6 Watts | Efficacy: 49.6 lm/W | 80.0 CRI; 4037K CCT
0° 20°
40°
60°
80°90°
-20°
-40°
-60°
-80°-90°
0° 90°
CAND
LEPO
WER D
ISTRI
BUTIO
N
VERTICAL ANGLE
HORIZONTAL ANGLE ZONAL LUMENS0º 45º 90º 135º 180º
0 663 663 663 663 6635 707 676 674 515 456 5715 640 635 664 283 313 14225 992 739 659 233 261 23435 278 165 143 195 218 12745 43 40 87 155 167 7455 19 18 45 91 92 4865 13 11 19 47 48 2875 4 3 7 23 22 1385 0 0 1 3 0 290 0 0 0 0 0
LUME
N SU
MMAR
Y
ZONE LUMENS % FIXTURE
0 - 40 560 770 - 60 682 940 - 90 724 1000 - 180 724 100
4DR-TL-L13/8TW-DIM-UNV-LM-OF-WH Total Luminaire Output: 1148 lumens; 14.6 Watts | Efficacy: 78.6 lm/W | 80.0 CRI; 4037K CCT90°
0° 20°
40°
80°
60°
0°
CAND
LEPO
WER D
ISTRI
BUTIO
N
VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0º0 29715 2844 25915 1745 46725 472 22835 123 8245 56 4455 36 3265 22 2275 11 1285 2 390 0
LUME
N SU
MMAR
Y
ZONE LUMENS % FIXTURE
0-40 1036 900-60 1112 970-90 1148 1000-180 1148 100
4DR-TL-L13/8TW-DIM-UNV-RM-OF-WH Total Luminaire Output: 1149 lumens; 14.6 Watts | Efficacy: 78.7 lm/W | 80.0 CRI; 4037K CCT90°
0° 20°
40°
80°
60°
0°
CAND
LEPO
WER D
ISTRI
BUTIO
N
VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0º0 33135 3087 27615 1715 46625 503 24135 124 8345 48 3855 27 2465 14 1475 6 685 2 290 0
LUME
N SU
MMAR
Y
ZONE LUMENS % FIXTURE
0-40 1064 930-60 1127 980-90 1149 1000-180 1149 100
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 3 of 6HEW.70714.LA REV.04/24/20
4DR 4.5″ Downlight – Round
CONTROL DETAILS
Fixture 1 Fixture 2Quick
Connect2-conductor
DALI DALI +
DALI -
DMX
RJ45 Ports (IN/OUT)
QuickConnect
Ethernet cable
QuickConnect
2-conductor
DIM DIM (Int) +
DIM (CCT) +DIM -
Fixture 1
Fixture(Master)
Fixture(Satellite)
Fixture 2
LUTRON T-SERIES
Fixture 1 Fixture 2Quick
Connect2-conductor
T1
T2
TRIMLOCK DETAILSTWIST PULL RELEASE
SLOPED CEILING ADAPTOR DETAILS
A
ø9″Ceiling cutout: ø9-3/8″
A (HEIGHT) PLENUM HEIGHT5° 10° 15° 20° 25° 30°
8-13/16″ 8-15/16″ 9″ 8-15/16″ 8-7/8″ 8-11/16″ 9-1/4″15° Shown
TRIM TYPE DETAILSOPEN OPEN (WALL WASH) FLUSH SHOWER ANGLED REGRESSED
ø4-1/2″ ø4-1/2″ ø4-1/4″ 1/8″ ø4-1/4″ 1/8″ ø4-1/4″ 1/8″ ø4-3/8″ 1/8″
1-1/4″
FLANGE TYPE DETAILS1/2″ STANDARD 1/4″ MUD-IN MUD FLANGE MOUNTING KIT (SLIM FLANGE TYPE)
ø5-1/2″
Ceiling Cutout: ø5″
ø5″Ceiling cutout: ø5-1/2″
1/2″1/8″
ø8″ø5-3/16″
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 4 of 6HEW.70714.LA REV.04/24/20
4DR 4.5″ Downlight – Round
REFLECTOR FINISH DETAILSSPC Clear specular
SG Satin-glow
PW Pewter
GD Gold
CG Champagne gold
RG Rose gold
CS Clear semi-specular
WH White
BL Black
MOUNTING TYPE DETAILSNEW CONSTRUCTION IC-RATED REMODEL
15″
12″
ø5″6″
4-1/4″
B
C
A
D
LENGTHLUMENS A B C D
L13 15-3/16″ 16″ 6-3/8″ 12-1/8″L22 16-5/8″ 17-1/2″ 7-7/8″ 14″
Cross Section
ø4-1/2″
5-3/4″
Receiver Bracket
3-1/4″
2-3/4″
6-5/8″ 1-1/8″ minspace
Ceiling cutout
Driver and Junction Box
6-15/16″
4-1/8″
5-1/4″
EM/10W/RTS DETAILS
Shown Installed
Test buttonfrom EM Driver
RTS trim nut
RTS trim washer
RTS trim
RTS TRIM CUTOUT (Outside pan boundary) Downlight cutout
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 5 of 6HEW.70714.LA REV.04/24/20
4DR 4.5″ Downlight – Round
MOUNTING HARDWARE DETAILS
F1 Integral 2-position fixed pan bracket, universal bar hanger included BA1 Adjustable butterfly pan bracket, bar hanger not included (N Mounting Type only)
CA1 Adjustable caterpillar pan bracket, universal bar hanger included (N Mounting Type only)
Mounts to t-bar or nailer bar
14″ minimum24″ maximum
Mounts to t-bar or nailer bar
14″ minimum24″ maximum
BA2 Adjustable butterfly pan bracket, heavy-duty universal bar hanger included (N Mounting Type only)
CA2 Adjustable caterpillar pan bracket, t-bar hanger included (N Mounting Type only)
Mounts to t-bar or nailer bar
12″ minimum24″ maximum
Mounts to t-bar
11″ minimum26″ maximum
H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.
Downlights Page 6 of 6HEW.70714.LA REV.04/24/20
4DR 4.5″ Downlight – Round
