Page 1 of 2

SUBMITTAL

JOB:

ENGINEER: CONTRACTOR:

REPRESENTATIVE:

ORDER NO: SUBMITTED BY: APPROVED BY:

DATE: DATE: DATE:

Series PiB 4380 IVS Vertical-In-line With VFD Control Pumps

PUMP DESIGN DATA PUMP MODEL: CAPACITY: USgpm (l/s) LIQUID: FLANGE RATING: ANSI 125 MAXIMUM WORKING PRESSURE: 175 psig (12 BAR) MAXIMUM OPERATING TEMPERATURE: 250°F (121°C)

QUANTITY REQUIRED: HEAD: ft. (m) TEMPERATURE: °F (°C)

MATERIALS OF CONSTRUCTION CASING CAST IRON IMPELLER BRONZE MOTOR SHAFT CARBON STEEL SHAFT SLEEVE BRONZE GASKET NON-ASBESTOS FIBER

MOTOR DESIGN DATA FREQUENCY 60 HERTZ

EFFICIENCY NEMA PREMIUM 12.12 ENCLOSURE TEFC

VOLTAGE 208V - 230V 460V 575V

MECHANICAL SEAL DESIGN DATA SEAL TYPE 2A ROTATING FACE RESIN BONDED CARBON STATIONARY SEAT SILICON CARBIDE SECONDARY SEAL EPDM SPRING STAINLESS STEEL ROTATING HARDWARE STAINLESS STEEL

DRIVE DATA

PROTOCOL (Standard): Modbus RTU ENCLOSURE: UL Type 12 EMI/RFI CONTROL: Integrated Filter designed to meet EN61800-3 HARMONIC SUPPRESSION: Integrated DC Link Reactors (<5% THD) COOLING: Fan-cooled through back channel AMBIENT TEMPERATURE: -10°C to +45°C up to 1000 meters above sea level (-14°F TO +113°F, 3280ft) ANALOG INPUTS: 2, current or voltage ANALOG OUTPUTS: 1, current DIGITAL INPUTS: 4 Programmable DIGITAL OUTPUTS: 2 Programmable (can be configured as additional digital inputs) PULSE INPUTS: 2 Programmable RELAY OUTPUTS: 2 Programmable

SENSORLESS CONTROL: Included

• TOLERANCE OF ±0.125" (±3 mm) SHOULD BE USED • FOR EXACT INSTALLATION DATA PLEASE WRITE FACTORY FOR CERTIFIED DIMENSIONS • SEE PERFORMANCE CURVES ON PAGE 2 • PUMP EQUIPPED WITH CASING DRAIN PLUG AND 1/4" NPT SUCTION AND DISCHARGE GAUGE

PORTS

FILE NO: 43.783 DATE: May 27, 2010 SUPERSEDES: 43.783 DATE: Apr. 19, 2010

MODEL CURVE CONNECTIONS ANSI 125#

MOTOR DIMENSIONS WEIGHT lbs (kg) HP PHASE &

VOLTAGE RPM X Y H D

4380IVS-1508F-1.5/4 14E 1.50 1.5

3 Phase 208-230, 460 or

575 Volt

1800 16.00 (406) 17.09 (434) 21.36 (543) 4.80 (122) 192 (87.3) 4380IVS-2206F-1.5/4 16E 2.00 1.5 1800 15.00 (381) 15.92 (404) 21.35 (542) 4.88 (124) 181 (82.3) 4380IVS-2208F-3.0/4 18E 2.00 3 1800 18.00 (457) 17.80 (452) 21.86 (555) 5.20 (132) 233 (105.9) 4380IVS-2208F-5.0/4 18G 2.00 5 1800 18.00 (457) 17.80 (452) 21.86 (555) 5.20 (132) 243 (110.5) 4380IVS-2210F-5.0/4 20E 2.00 5 1800 19.00 (483) 18.75 (476) 21.86 (555) 5.35 (136) 276 (125.5) 4380IVS-3306F-2.0/4 22G 3.00 2 1800 18.00 (457) 18.17 (462) 21.35 (542) 6.06 (154) 197 (89.5) 4380IVS-3308F-3.0/4 24C 3.00 3 1800 22.00 (559) 18.75 (476) 21.86 (555) 6.31 (160) 259 (117.7) 4380IVS-3308F-5.0/4 24E 3.00 5 1800 22.00 (559) 18.75 (476) 21.86 (555) 6.31 (160) 269 (122.3) 4380IVS-3310F-7.5/4 26E 3.00 7.5 1800 21.00 (533) 21.37 (543) 29.09 (739) 5.40 (137) 382 (173.6)

Note : All dimensions are in inches (mm) and weights in lbs (kg). For exact installation data please write factory for certified dimensions.

PERFORMANCE CURVES

S. A. Armstrong Limited 23 Bertrand Avenue Toronto, Ontario Canada, M1L 2P3 T: 416-755-2291 F: 416-759-9101

Armstrong Pumps Inc. 93 East Avenue North Tonawanda, New York U.S.A. 14120-6594 T: 716-693-8813 F: 716-693-8970

Armstrong Integrated Ltd. Wenlock Way Manchester United Kingdom, M12 5JL T: +44 (0) 8444 145 145 F: +44 (0) 8444 145 146 © S.A. Armstrong Limited 2010

For Armstrong locations worldwide, please visit www.armstrongintegrated.com

CURVE MODEL

CURVE MODEL

14E 4380IVS-1508F-1.5/4 22G 4380IVS-3306F-2.0/4 16E 4380IVS-2206F-1.5/4 24C 4380IVS-3308F-3.0/4 18E 4380IVS-2208F-3.0/4 24E 4380IVS-3308F-5.0/4 18G 4380IVS-2208F-5.0/4 26E 4380IVS-3310F-7.5/4 20E 4380IVS-2210F-5.0/4

5(0.32)

30(1.89)

20(1.26)

10(0.63)

50(3.15)

70(4.42)

100(6.31)

200(12.62)

300(18.93)

400(25.24)

(39.6) 130

(30.5) 100

(24.4) 80

(18.3) 60

(15.2) 50

(9.1) 30

(6.1) 20

(12.2) 40

(3.0) 10

(1.5) 5

20E

14E

16E

18E 18G

26E

24E

24C

22G

Flow - USGPM(L/s)

Tota

l Hea

d - F

eet(

m)