FUNAI BRAND NEW PRODUCT LOGO (revised edition 1,APR.,2010

40FDI7514(REF. NO.: 10090402)

ENGLISH

English      -­  1  -­

ContentsSafety  Information  .................................................. 2Getting  Started  ....................................................... 3

 .................. 3Remote  Control  ...................................................... 6

............................................................ 7  .............. 8

 ........................ 10  .......................................... 13

................................................. 14  ......................................... 14

 .......................... 15  ....................... 15

 ................ 16  .................................. 17

 ................................................... 22

40FDI7514 1

English      -­  2  -­

Safety  Information

Note   :  Follow   the  on  screen   instructions   for  operating   the  related  features.

To  operate  your  TV  in  extreme  ambient  conditions  may  cause  damage  of  the  device.

CAUTIONRISK  OF  ELECTRIC  SHOCK

DO  NOT  OPEN

CAUTION:    

 IMPORTANT  -­  Please  read  these  instructions  fully  before  installing  or  operating

  WARNING:   Never   let   people   (including  children)   with   reduced   physical,   sensory   or  mental  capabilities  or  lack  of  experience  and  /  or  knowledge  use  electrical  devices  unsupervised.

Do  not  Do  not

Do  not  

do  not

 

Do  not

Do  not

 

 

 

2 40FDI7514

English      -­  3  -­

Environmental  Information  

Eco

If   Screen   will   be   off   in   15  seconds.

PROCEED OK  to  off   immediately.  

.  

Power  Save  ModeDynamic.

“TV  switched  to  stand-­by  mode  automatically  because  there  was  no  signal  for  a  long  time”.   OK

“TV   switched   to   stand-­by   mode   automatically  because  no  operation  was  made  for  a  long  time”  

OK

Features

dongle

Accessories  IncludedRemote  Control  

TV  Control  Switch  &  Operation

1.

2.3.  

Getting  Started

40FDI7514 3

English      -­  4  -­

To  change  volume:  

To  change  channel:  

To  change  source:

To  turn  the  TV  off:  

Notes:

Operation  with  the  Remote  ControlMenu

Left  or  Right  OK  to  enter.  

Left  /  Right  /  Up  /  Down  Return/Back  or  Menu

Input  Selection

Source

Changing  Channels  and  Volume

Volume  +/-­  and  Programme  +/-­

Inserting  the  Batteries  into  the  Remote

AAA

Connect  Power  IMPORTANT220-­240V  AC,  50  Hz

Antenna/Cable  Connection

 

VGA

SPDIF

Aerial or Cable

TRADEMARK  ACKNOWLEDGMENT

4 40FDI7514

English      -­  5  -­

Information   for   Users   on   Disposal   of   Old  Equipment  and  Batteries[European  Union  only]

Notice:    The  sign  Pb  below  the  symbol  for  batteries  indicatesthat  this  battery  contains  lead.

Products

Battery

TV  Broadcasting

Receiving  Channels

Digital  Reception

Number  of  Preset  Channels

1000

Channel  Indicator

RF  Aerial  Input

LNB  Input

Operating  Voltage

Audio

Audio  Output  Power  (WRMS.)  (10%  THD)

2  x  6

Power  Consumption

Weight

TV  Dimensions  DxLxH  (with  foot)

TV  Dimensions  DxLxH  (without  foot)

Display

Operation  temperature  and  operation  humidity max

40FDI7514 5

English      -­  6  -­

Getting  Started  Remote  Control

NOTE:  The  Remote  Control  range  is  approximately  7m  /  23ft.

Using  My  button  1  (*)

Using  My  Button  2  (**)

1.  2.  3.  4.  5.  6.  7.  8.  9.  10.  11.  12.  13.   Internet14.  15.  16.  17.  18.  19.  20.  21.  22.  23.  

24.  25.  26.  27.  28.  

29.  30.  31.  Teletext

"

Digital  Teletext"

OK

"

6 40FDI7514

English      -­  7  -­

NOTE:  When   connecting  

a   device   via   the   YPbPr   or  

S ide   AV   input ,   you   must  

use   connection   cables   to  

enable   connection.   See   the  illustrations  on  the  left  side.  |  To  enable  PC  audio,  you  will  need  to  use  SIDE  AV  CONNECTION  cable’s  WHITE  &  RED  inputs.  |  If  an  external  device  is  connected  via   the  SCART  socket,   the  TV  will   automatically   switch   to  AV  mode.|   When   receiving   DTV  channels   (Mpeg4   H.264)   or  while   in  Media  Browser  mode,  output  will  not  be  available  via  the  scart  socket.   |  When  using  the  wall  mounting  kit  (optional),  we  recommend  that  you  plug  all  your  cables  into  the  back  of  the  TV  before  mounting  on  the  wall.  |  Insert  or  remove  the  CI  module  only  when  the  TV  is  SWITCHED  OFF.   You   should   refer   to   the  module   instruction   manual   for  details   of   the   settings.   |   Each  USB   input   of   your   TV   supports  devices  up  to  500mA.  Connecting  devices   that   have   current   value  above  500mA  may  damage  your  TV.

Connector Type Cables Device

ScartConnection

(back)

VGAConnection

(back)

SIDE  AV   PC/YPbPr  Audio

Connection(side)

   

   

HDMIConnection

(back)

SPDIFF(Coaxial  Out)Connection

(back)

SIDE  AV Side  AV(Audio/Video)Connection

(side)

HEADPHONEHeadphone  Connection

(side)

PC  to  YPbPr

YPbPr  VideoConnection

(side)

USB  Connection  

(side)

CI  Connection  

(side)

LAN

 

Ethernet  Connection  

(back)    

Getting  Started  Connections

40FDI7514 7

English      -­  8  -­

Switching  On/OffTo  Switch  the  TV  On

Standby Programme   +/-­   or   a  

To  Switch  the  TV  OffStandby

To  power  down  the  TV  completely,  unplug  the  power  cord  from  the  mains  socket.Note:  When   the   TV   is   switched   into   standby  mode,   the  standby   LED   can   blink   to   indicate   that   features   such   as  Standby  Search,  Over  Air  Download  or  Timer  is  active.  The  LED  can  also  blink  when  you  switch  on  the  TV  from  standby  mode.

First  Time  Installation

OK   to  

Note:  Depending  on  the  Country  selection  you  may  be  asked  

be  0000.  You  have  to  enter  it  if  you  are  asked  to  enter  a  PIN  for  any  menu  operation  later.

Store   Mode

Home  ModeIf  Store  Mode

YESOther  Settings

If  Home  Mode Store  ModeFirst  Time  Installation OK  

Aerial  InstallationAerial

 Channel  List

Yes OK   .

MenuCable  Installation

Cable OK

YES OKNO OK

OK  

Note:   Searching   duration  will   change   depending   on   the  selected  search  step.

Media  Playback  via  USB  Input

IMPORTANT!

Note:

USB  device.

Getting  Started  First  Time  Installation  -­  USB  Connections

8 40FDI7514

English

Media  Browser  Menu

MenuPicture Sound  

and  Settings Menu   Media  

Browser Settings

Start  playback  with  the  Play  

button  and  activate     the  list.

Start  playback  with  OK  and  

activate     played  in  a  loop  (repeat).

Start  playback  with  OK/Play  

button  and  activate    

Quick  Menu

Power  Save  Mode,  Picture  Mode,  Equalizer  Settings,  Favourites,  Sleep  Timer  and  Information  booklet   Quick  Menu

40FDI7514 9

English      -­  10  -­

TV  Menu  Features  and  Functions

Picture  Menu  Contents

Mode Cinema Game Sports Dynamic  and  Natural.  

ContrastBrightnessSharpnessColour

Power  Save  Mode

Backlight  (Optional)

Noise  Reduction Noise  Reduction

Advanced  Settings

Dynamic  Contrast

Colour  Temp

Picture  ZoomNote:  Auto  option  is  only  available  in  Scart  mode  with  SCART  PIN8  high  voltage/low  voltage  switching

Film  Mode

Skin  Tone

Colour  Shift

RGB  Gain

HDMI  True  Black

PC  PositionAutoposition  PositionV  Position

Dot  Clock

Phase

ResetWhile  in  VGA  (PC)  mode,  some  items  in  Picture  menu  will  be  unavailable.  Instead,  VGA  mode  settings  will  be  added  to  the  Picture  Settings  while  in  PC  mode.

10 40FDI7514

English      -­  11  -­

Sound  Menu  Contents

VolumeEqualizerBalanceHeadphoneSound  ModeAVL  (Automatic  Volume  Limiting)

Headphone/Lineout

Dynamic  BassSurround  Sound  (optional)  Digital  OutSettings  Menu  ContentsConditional  AccessLanguage

Parental(*)Note:

TimersDate/TimeSourcesNetwork  SettingsOther  Settings

Menu  TimeoutScan  Encrypted  ChannelsBlue  BackgroundSoftware  UpgradeApplication  VersionHard  of  Hearing

40FDI7514 11

English      -­  12  -­

Audio  Description

Auto  TV  Off

Standby  Search  (Optional)

Store  Mode

Media  Renderer

Power  Up  ModeVirtual  RemoteFollowMe  TVInstall  and  Retune  Menu  Contents

Automatic  Channel  Scan  (Retune)

Digital  Aerial:Digital  Cable: Analogue:  

Digital  Aerial  &  Analogue:Digital  Cable  &  Analogue:

Manual  Channel  ScanNetwork  Channel  ScanAnalogue  Fine  TuneFirst  Time  InstallationClear  Service  List

12 40FDI7514

English      -­  13  -­

Using  the  Channel  List

Menu  Lock

Maturity  Lock

Child  Lock

Set  PIN

Note:  Default  PIN  can  be  set   to  0000  or  1234.   If  you  have  

selection)  during  the  First  Time  Installation  use  the  PIN  that  

Some  options  may  not  be  available  depending  on  the  country.

General  TV  OperationElectronic  Programme  Guide  (EPG)

Epg

Red  button  (Prev  Day):

Green  button  (Next  day):

Yellow  button  (Zoom): Yellow

Blue  button  (Filter):  SUBTTL:   Subtitles  

Info   button:

Numeric  Buttons   (Jump):

OK:Text   button   (Search): Guide   Search”  

Swap  button  (Now):

Programme  OptionsIn  EPG OKEvent  Options

Select  ChannelIn  EPG

40FDI7514 13

English      -­  14  -­

Software  Upgrade

Software  upgrade  search  via  user  interfaceSettings Other  

Settings Software  UpgradeOK Upgrade  Options Scan  for  upgrade OK

OK

3  AM  search  and  upgrade  mode

if   Automatic   scanning Upgrade   Options  Enabled

Note:  If  the  TV  fails  to  come  on  after  the  upgrade,  unplug,  wait  for  two  minutes  then  plug  it  back  in.

Troubleshooting  &  TipsTv  will  not  turn  on

Poor  picture

No  picture

No  soundMute

Remote  control  -­  no  operation

Input  sources  -­  can  not  be  selected

14 40FDI7514

English      -­  15  -­

AV  and  HDMI  Signal  Compatibility

Source Supported  Signals Available

EXT(SCART)

Side  AV

YPbPr  1080i

HDMI1HDMI2

480i

1080i

(X:  Not  Available,  O:  Available)In  some  cases  a  signal  on  the  LCD  TV  may  not  be  displayed  properly.   The   problem  may   be   an   inconsistency   with  

).  If  you  do  experience  such  a  problem  please  contact  your  

PC  Input  Typical  Display  Modes  

Index Resolution Frequency

1 640x3502 640x4003 640x4004 640x4805 640x4806 640x4807 640x4808 640x4809 800x600

10 800x60011 800x60012 800x60013 800x60014 800x60015 832x62416 1024x76817 1024x76818 1024x76819 1024x76820 1024x76821 1024x76822 1152x86423 1152x86424 1152x86425 1152x86426 1152x87027 1280x76828 1360x76829 1280x76830 1280x76831323334 1280x102435 1280x102436 1280x102437 1400x105038 1400x105039 1400x1050404142 1600x120043 1680x10504445

40FDI7514 15

English      -­  16  -­

Supported  File  Formats  for  USB  Mode

Media Extension Format Notes

Video

1080P@

Audio

Picture

Subtitle -­

-­

16 40FDI7514

English      -­  17  -­

Supported  DVI  Resolutions

72Hz 75Hz

640x400

640x480

800x600

832x624

1024x768

1152x864

1152x870

1280x768

1360x768

1280x1024

1400x1050

1600x1200

1680x1050

40FDI7514 17

English      -­  18  -­

ConnectivityWired  Connectivity

To  Connect  to  a  Wired  Network

Media  Browser MenuMedia  Browser OK

OKMedia  Browser

Network  Settings  section  in  the  Settings  menu.

Network  TypeWired  or  Wireless  

DeviceWired  Device

IP  Address

Green

Advanced  ModeGreen

Red OK  Return Back  to  exit.

Wireless  Connectivity  To  Connect  to  a  Wireless  NetworkIMPORTANT

To  Connect  to  a  wireless  LAN,  you  should  perform  

the  following  steps:

1.  

2.  

3.  to  

18 40FDI7514

English

Network  Settings Network  Type Wireless  Device

Yellow

Note:   If   the  modem  supports  N  mode,   you   should   set  N  mode  settings.

OK

Network  Type OK.

Blue  

GreenOK

Other  Information

Connected  or  Not  Connected.IP  Address:Network  Name:

Red

Connecting  to  your  mobile  device  via  Wireless  Connectivity

Wireless  Connectivity

OK  40FDI7514 19

English      -­  20  -­

Note:  This   feature  may  not  be  supported  on  all  mobile  devices.

Connectivity  TroubleshootingWireless  Network  Not  Available

Network  Settings

Connection  is  Slow

Distruption  during  playback  or  slow  reactions

Using  Multimedia  Server  Access  Network  Service

1.  Nero  Media  Home  Installation

2.  Connect  to  a  Wired  or  Wireless  NetworkNetwork   Settings   for   detailed  

3.  Play  Shared  Files  via  Media  BrowserMedia  Browser Left   or   Right  

OK

Multimedia  Server  Access

SettingsOK View  

Style Folder Left  or  Right  OK.

Device  Selection

OK

Green Menu  to  exit.  

OK.Videos

.Videos

Media  Browser  Menu  

Note:  

20 40FDI7514

English      -­  21  -­

Nero  MediaHome  InstallationTo   install   Nero   MediaHome,   please   proceed   as  follows:Note:  To  use  DLNA  function,  this  software  should  be  installed  to  your  PC.

1.  

2.   Download

PC.  3.  

4.  

5.   Install

6.   Next  

7.   Next

8.   Install  

9.   Finish

10.  Congratulations!

Internet  PortalHINT:

First   Time  Installation

Internet

Note  on  PIP  Window

Programme  +/-­

OK  Return/

BackExit

Note:

Parental  Settings.

40FDI7514 21

English      -­  22  -­

Internet  Browser

Refresh

Previous

Next

Quick Access

Home Page

Address Bar Add History Bookmarks Zoom

Settings

Remote control shortcuts

(Zoom in-out/Back/Home)

OK  

To  use  the  internet  browser,  please  select  the  internet  browser  logo  from  the  portal  section.

22 40FDI7514