4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3
-
Upload
annaprasad -
Category
Documents
-
view
1.044 -
download
3
Transcript of 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3
![Page 1: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/1.jpg)
Chapter 1Crystal Structure and
Noncrystalline Structure
![Page 2: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/2.jpg)
Learning objectives
Describe what crystalline and noncrystalline materials are
Draw unit cells for face-centered cubic (FCC), body-centered cubic (BCC) and hexagonal close-packed (HCP) crystal structures
Derive the relationships between unit cell edge length and atomic radius for FCC and BCC crystal structures
Compute the densities for metals having FCC and BCC structures
Write the designation for atom position, direction indices and Miller indices for cubic crystals
![Page 3: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/3.jpg)
Crystalline and Amorphous Structure Most of engineering materials are
crystalline – atoms are arranged in a regular and repeating manner
Metals are crystalline Minerals such as celestite (SrSo4),
amethyst (SiO2), alloys and some ceramic materials are also crystalline
Amorphous – without form, or non-crystalline such as polymers, glasses and some metals
![Page 4: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/4.jpg)
• Rare due to poor packing (only Po has this structure)
Simple cubic (SC)
![Page 5: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/5.jpg)
Face-centered cubic (FCC)
Isolated unit cellHard-sphere unit cellAtomic-site unit cell
![Page 6: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/6.jpg)
Face-centered cubic (FCC)
Relationship between the lattice constant, a, and the atomic radius, R.
Typical metals: -Fe, Al, Ni, Cu, Ag, Pt, Au
![Page 7: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/7.jpg)
Body-centered cubic (BCC)
Isolated unit cellHard-sphere unit cellAtomic-site unit cell
![Page 8: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/8.jpg)
Body-centered cubic (BCC)
Relationship between the lattice constant, a, and the atomic radius, R.
Typical metals: -Fe, V, Cr, Mo, W
![Page 9: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/9.jpg)
Hexagonal close-packed (HCP)
Relationship between edge length and atomic radius : a = 2RTypical metals: Be, Mg, -Ti, Zn, Zr
Isolated unit cellHard-sphere unit cellAtomic-site unit cell
![Page 10: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/10.jpg)
R
Atoms/unit cell
Unit cell contains: 6 x 1/2 + 8 x 1/8 = 4 atoms/unit cell
Unit cell contains: 1 + 8 x 1/8 = 2 atoms/unit cell
SC BCC FCC
Unit cell contains:8 Corners x 1/8
= 1 atom/unit cell
a
R=0.5a
a a
![Page 11: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/11.jpg)
Metals’ density
1. Copper is an fcc metal with an atomic radius of 0.128 nm. Calculate the density of copper. Atomic mass of copper is 63.55 g/mol.
2. Tungsten is a bcc metal with an atomic radius of 0.137 nm. Calculate the density of tungsten. Atomic mass of tungsten is 183.85 g/mol
![Page 12: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/12.jpg)
5
APF = Volume of atoms in unit cell*
Volume of unit cell
*assume hard spheres
Atomic packing factor (APF) fraction of unit-cell volume occupied by
atoms
Calculate the APF for the BCC and FCC unit cell, assuming the atoms to be hard spheres.
![Page 13: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/13.jpg)
13
Theoretical Density,
where n = number of atoms/unit cell A = atomic weight VC = Volume of unit cell = a3 for cubic NA = Avogadro’s number = 6.022 x 1023 atoms/mol
Density = =
VC NA
n A =
Cell Unit of VolumeTotal
Cell Unit in Atomsof Mass
![Page 14: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/14.jpg)
Space lattice and unit cell
Crystalline structure – regular and repeating
Unit cell – structural unit that is repeated by translation in forming a crystalline structure
Lattice constants – length of a unit cell edge and/or angle between crystallographic axes
![Page 15: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/15.jpg)
Seven Crystal Systems Unique unit cell
shapes that can be stacked together to fill 3-D space
![Page 16: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/16.jpg)
14 Bravais Lattices
Lattice points – theoretical points arranged periodically in 3-D space
![Page 17: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/17.jpg)
Lattice positions
Atom positions in a BCC unit cell
![Page 18: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/18.jpg)
Directions in the unit cells: Miller indices is a notation system in crystallography for planes and directions in crystal
Shorthand notation 1. determine the coordinates of two points 2. subtract the coordinates of the tail from the head 3. Clear fraction and reduce the results to lowest
integers 4. Enclose the number in a brackets [ ]. If negative sign
is produced, represent the negative sign with a bar over the number
![Page 19: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/19.jpg)
Lattice direction
![Page 20: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/20.jpg)
Lattice planes – Miller indices
1. Identify the points at which the plane intercepts 2. Take receprocal of these inetercepts 3. Clear fractions 4. Enclose the number in a brackets , no comma [ ]. If negative sign
is produced, represent the negative sign with a bar over the number
![Page 21: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/21.jpg)
21
Crystallographic Planes z
x
ya b
c
4. Miller Indices (110)
example a b cz
x
ya b
c
4. Miller Indices (100)
1. Intercepts 1 1 2. Reciprocals 1/1 1/1 1/
1 1 03. Reduction 1 1 0
1. Intercepts 1/2 2. Reciprocals 1/½ 1/ 1/
2 0 03. Reduction 2 0 0
example a b c
![Page 22: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/22.jpg)
22
Crystallographic Planesz
x
ya b
c
4. Miller Indices (634)
example
1. Intercepts 1/2 1 3/4
a b c
2. Reciprocals 1/½ 1/1 1/¾
2 1 4/3
3. Reduction 6 3 4
(001)(010),
Family of Planes {hkl}
(100), (010),(001),Ex: {100} = (100),
![Page 23: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/23.jpg)
HOME WORK FOR VLNV-MECH
What are the Miller indices of the cubic crystallographic planes shown?
![Page 24: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/24.jpg)
Single crystal : A material formed by the growth of a crystal nucleus without secondary nucleation or impingement on other crystals; a regular three-dimensional structure extends throughout the material
Polycrystalline materials are solids that are composed of many crystallites of varying size and orientation. The variation in direction can be random (called random texture) or directed, possibly due to growth and processing conditions.
Anisotropy: Is the property being directionally dependent Modulus of Iron: [100]= 125 MPa[110]= 210 Mpa[111]= 272 MPa
Isotropic: Substances in which measured properties are independent of direction. Example; Tungsten , modulus is 384 in all direction [100], [110], [111].
![Page 25: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/25.jpg)
![Page 26: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/26.jpg)
26
X-Rays to Determine Crystal Structure
X-ray intensity (from detector)
c
d n
2 sinc
Measurement of critical angle, c, allows computation of planar spacing, d.
• Incoming X-rays diffract from crystal planes.
Adapted from Fig. 3.37, Callister & Rethwisch 3e.
reflections must be in phase for a detectable signal
spacing between planes
d
incoming
X-rays
outg
oing
X-ra
ys
detector
extra distance travelled by wave “2”
“1”
“2”
“1”
“2”
![Page 27: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/27.jpg)
27
X-Ray Diffraction Pattern
Adapted from Fig. 3.20, Callister 5e.
(110)
(200)
(211)
z
x
ya b
c
Diffraction angle 2
Diffraction pattern for polycrystalline -iron (BCC)
Inte
nsity
(re
lativ
e)
z
x
ya b
cz
x
ya b
c
![Page 28: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/28.jpg)
Assignment for VLNV Mech
1. Draw direction vector in unit cubes for the following cubic directions
2. Draw in unit cubes the crystal planes that have the following Miller indices
(a) [111], (b) [110], (c)[121], (d)[113]
(a) (111), (b) (321), (c)(121), (d)(331)
(e) (302), (f) (014), (g)(342)
![Page 29: 4 MATERIAL SCIENCE Crystal Structure for Viet 1 No3](https://reader036.fdocuments.in/reader036/viewer/2022062303/55255fb14a7959c2488b4be5/html5/thumbnails/29.jpg)
3. Determine the expected diffraction angle for the first-order reflection from the (310) set of planes for BCC chromium when monochromatic radiation of wavelength 0.0757 nm is used.
4. Using the data for α-iron in Table 3.1, compute the interplanar spacings for the (111) and (211) sets of planes.
5. The metal niobium has a BCC crystal structure. If the angle of diffraction for the (211) set of planes occurs at 75.99° (first-order reflection) when monochromatic x-radiation having a wavelength of 0.1659 nm isused, compute (a) the interplanar spacing for this set of planes, and (b) the atomic radius for the niobium atom.