3D machining 23D machining 2

Contents

Import modelImport model

View of the part’s model

Folder of imported model items

Import geometry model

Contents

Workpiece setupWorkpiece setup

Workpiece parameters tab

Create workpiece by extruding a closed curve

Top and bottom levels of the workpiece

Workpiece contour’s closed curve

Workpiece contour Workpiece model

Contents

Create operationCreate operation

Create operation menu

Roughing waterline

Roughing operations

New Roughing waterline operation

Contents

Part parameters tab

Part and WorkpiecePart and Workpiece

SprutCAM uses the contents of the Model folder as the Part for machining by default. The default workpiece is a prism box around part the Part. Workpiece can be imported from external source as well.

Use part of previous operation

Workpiece parameters tab

Use result of previous operation as workpiece

Contents

Operation parametersOperation parameters

Parameters of the active operation

Active operation

Contents

Operation parametersOperation parameters

Contents

ToolpathToolpath

Calculate toolpath

Toolpath

Toolpath calculated without errors

Contents

Machining simulationMachining simulation

Continuous simulation

Result of simulation

Contents

Create operationCreate operation

Create operation

Roughing waterline

Roughing operations

New Roughing waterline operation

Contents

Job assignmentJob assignment

Job assignment parameters tab

Contour created with the built-in 2D Geometry drafting system

View of the work area with workpiece

A closed contour limiting the machined area to the groove on the part is used as the Job assignment.

Contents

Machining parametersMachining parameters

Contents

Toolpath calculationToolpath calculation

Run toolpath calculation

Toolpath

Indicates calculation success

Contents

Machining simulationMachining simulation

Continuous simulation

Result of previous operation

Result of machining simulation

Contents

Create operationCreate operation

Create operation

Finishing Complex

Finishing operations

New Finishing Complex operation consists of two operations – Finishing plane and Finishing waterline operations

Contents

Machined part and workpieceMachined part and workpiece

The part for the Finishing complex operation is the part from previous operations. The workpiece is the machining result of previous operations.

Machined part

Use part of the previous operation

Workpiece parameters

Use machining result of the previous operation

Contents

Finishing plane parametersFinishing plane parameters

Contents

Finishing waterline parametersFinishing waterline parameters

Contents

ToolpathToolpath

Calculate ToolpathCalculation is successfull

Toolpath of the Finishing plane operation

Toolpath of the Finishing complex operation

Toolpath of the Finishing waterline operation

Contents

Continuous simulation

Machining result

Machining simulationMachining simulation

Contents

Create new operation

Finishing drive (rest)

Rest machining operations

New Finishing drive (rest) operation

Create operationCreate operation

Contents

Part and WorkpiecePart and Workpiece

The part for the Finishing drive (rest) operation is the part of previous operations. The workpiece is the machining result of previous operations.

Machined part

Reference to the part model

Workpiece

Reference to machining result of previous operations

Contents

Finishing drive (rest) parametersFinishing drive (rest) parameters

Contents

Toolpath calculationToolpath calculation

Calculate toolpath

Calculation is sucessful

Rest areas machined by the finishing drive(rest) operation

Contents

Machining simulationMachining simulation

Blue colored areas are machined by the Finishing drive (rest) operation

Continuous simulation

Contents

Machining simulation for each operationMachining simulation for each operation

Finishing result of machining

Contents

Tools list compilingTools list compiling

Create Tools list

Tools list dialogViews configuration

Objects visibility panelDocument pattern

Contents

Tools listTools list

Technology operations

Document header

List of tools

Machining time

Views of model geometry

Contents

PostprocessorsPostprocessors

Create NC-program

Postprocessor configuration file

File of the NC-program

NC-program code listing

Contents