38 Wandh. 295 38 272+|KH :DQGKDNHQ Korpus 790 · 2016. 1. 19. · and according to both IEC60364...
Transcript of 38 Wandh. 295 38 272+|KH :DQGKDNHQ Korpus 790 · 2016. 1. 19. · and according to both IEC60364...
Ko
rp
us 7
90
38 Wandh. 295 38
27
2Höhe Wandhaken 518
Korpus 371
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screw hooks, dimensions for mounting and drain
www.pelipal.com
07.10.2015
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und Personenschäden
Bei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung .
• Die Montage muß durch fachkundiges Personal erfolgen.
• Beachten Sie die beiliegenden Montageanleitungen.
• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel.
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technician
and according to both IEC 60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.
We will not be held responsible in case of disregard.
• Assembly must be carried out by skilled personnel.
• Take notice of enclosed installation instructions.
• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
Solitaire 6010 6010-HB01
Solitaire 6010
265
38 Wandhaken 294 238
Korpus mit Wangen 570
Höh
e W
andh
aken
525
Kor
pus
mit
Abd
eckp
latte
n 7
90
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
01.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-HBR01
Korpus 371
Ko
rp
us 1
69
0
38 Wandh. 295 38
47
Höhe Wandhaken 1643
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screw hooks, dimensions for mounting and drain
www.pelipal.com
07.10.2015
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und Personenschäden
Bei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung .
• Die Montage muß durch fachkundiges Personal erfolgen.
• Beachten Sie die beiliegenden Montageanleitungen.
• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel.
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technician
and according to both IEC 60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.
We will not be held responsible in case of disregard.
• Assembly must be carried out by skilled personnel.
• Take notice of enclosed installation instructions.
• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
Solitaire 6010 6010-HS01
Solitaire 6010
Höh
e W
andh
aken
525
H
öhe
Wan
dhak
en 1
117
48
38 Wandhaken 294 238
Kor
pus
mit
Abd
eckp
latte
n 1
690
Korpus mit Wangen 570
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
01.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-HSR01
Korpus 1210
38 Wandh. 295 38
47
Höhe Wandhaken 1163
Korpus 371
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screw hooks, dimensions for mounting and drain
www.pelipal.com
07.10.2015
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und Personenschäden
Bei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung .
• Die Montage muß durch fachkundiges Personal erfolgen.
• Beachten Sie die beiliegenden Montageanleitungen.
• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel.
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technician
and according to both IEC 60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.
We will not be held responsible in case of disregard.
• Assembly must be carried out by skilled personnel.
• Take notice of enclosed installation instructions.
• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
Solitaire 6010 6010-MS01
Solitaire 6010
Korpus 371
Korpus 1210
38 Wandh. 295 38
47
Höhe Wandhaken 1163
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screw hooks, dimensions for mounting and drain
www.pelipal.com
07.10.2015
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und Personenschäden
Bei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung .
• Die Montage muß durch fachkundiges Personal erfolgen.
• Beachten Sie die beiliegenden Montageanleitungen.
• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel.
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technician
and according to both IEC 60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.
We will not be held responsible in case of disregard.
• Assembly must be carried out by skilled personnel.
• Take notice of enclosed installation instructions.
• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
Solitaire 6010 6010-MS02
Solitaire 6010
48
38 Wandhaken 294 238
Kor
pus
mit
Abd
eckp
latte
n 1
210
Korpus mit Wangen 570
Höh
e W
andh
aken
116
2
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
01.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-MSR01
48
38 Wandhaken 294 238
Kor
pus
mit
Abd
eckp
latte
n 1
210
Korpus mit Wangen 570
Höh
e W
andh
aken
116
2
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
01.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-MSR02
63 63 Wandhaken= 674 Breite= 800
77
Höh
e= 6
00
Höh
e W
andh
aken
= 5
23
El.-Anschl.= 400
El.-
Ans
chl.=
300
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SP01
63 Wandhaken= 668 Breite= 1203
77
Höh
e= 6
00
Höh
e W
andh
aken
= 5
23
472 K
ipps
iche
rung
= 64
El.-Anschl./Kippsicherung= 806
El.-
Ans
chl.=
300
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SP02
63 Breite= 1403
77
Höh
e= 6
00
Höh
e W
andh
aken
= 5
23
Wandhaken= 472 Wandhaken= 434 Wandhaken= 434 K
ipps
iche
rung
= 64
El.-Anschl./Kippsicherung= 903
El.-
Ans
chl.=
300
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SP03
Breite= 1555
77
Höh
e= 6
00
Höh
e W
andh
aken
= 5
23
Wandhaken= 322 Wandhaken= 322 Wandhaken= 456 Wandhaken= 456
Kip
psic
heru
ng=
64 El.-Anschl./Kippsicherung= 778 E
l.-A
nsch
l.= 3
00
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SP05
Breite= 1905
77
Höh
e= 6
00
Höh
e W
andh
aken
= 5
23
Wandhaken= 422 Wandhaken= 422 K
ipps
iche
rung
= 64
Wandh.= 350 Wandh.= 362 Wandh.= 350
Kippsicherung= Breite/2
El.-Anschl. 655
El.-
Ans
chl.=
300
El.-Anschl. 655
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SP06
Höh
e= 7
09
Breite= 540
Wan
dhak
en=
665
4
4
Wandhaken= 464 38 38 Wange= 10 Wange= 10
El.-Anschl.= 270
El.-
Ans
chl.=
351
,50
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPS01
Höh
e= 7
09
Breite= 840
Wan
dhak
en=
665
4
4
Wandhaken= 764 38 38 Wange= 10 Wange= 10
El.-Anschl.= 420
El.-
Ans
chl.=
351
,50
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPS02
Höh
e= 7
09
Breite= 1140
Wan
dhak
en=
665
4
4
Wandhaken= 1064 38 38 Wange= 10 Wange= 10
El.-Anschl.= 570 E
l.-A
nsch
l.= 3
51,5
0
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPS03
Höh
e= 7
09
Breite= 1340
Wan
dhak
en=
665
4
4
38 38 Wange= 10 Wange= 10
Wandh.= 562 Wandh.= 340 Wandh.= 362
El.-Anschl.= 670
El.-
Ans
chl.=
351
,50
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPS04
Höh
e= 7
09
Breite= 1340
Wan
dhak
en=
665
4
4
38 38 Wange= 10 Wange= 10
Wandh.= 312 Wandh.= 640 Wandh.= 312
El.-Anschl.= 670
El.-
Ans
chl.=
351
,50
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPS05
Höh
e= 7
09
Breite= 1540
Wan
dhak
en=
665
4
4
38
Wange= 10 Wange= 10
Wandh.= 562 Wandh.= 340 Wandh.= 562 38
El.-Anschl.= 770
El.-
Ans
chl.=
351
,50
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPS06
Höh
e= 7
09
Gesamtbreite= 1840
Wan
dhak
en=
665
4
4
38 Wange= 10
Wandhaken= 854 56 Wange= 10
COL-LI= 910 COL-RE= 910
El.-
Ans
chl.=
351
,50
Wandhaken= 854 38
El.-Anschl.= 460 El.-Anschl.= 460
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPS07
Höh
e= 7
09
Breite= 540
Wan
dhak
en=
665
4
4
Wandhaken= 464 38 38 Wange= 10 Wange= 10
El.-Anschl.= 270
El.-
Ans
chl.=
350
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPSB01
Höh
e= 7
09
Breite= 840
Wan
dhak
en=
665
4
4
Wandhaken= 764 38 38 Wange= 10 Wange= 10
El.-Anschl.= 420
El.-
Ans
chl.=
350
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPSB02
Höh
e= 7
09
Breite= 1140
Wan
dhak
en=
665
4
4
Wandhaken= 1064 38 38 Wange= 10 Wange= 10
El.-Anschl.= 570 E
l.-A
nsch
l.= 3
50
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPSB03
Höh
e= 7
09
Breite= 1340
Wan
dhak
en=
665
4
4
38 38 Wange= 10 Wange= 10
Wandh.= 562 Wandh.= 340 Wandh.= 362
El.-Anschl.= 670
El.-
Ans
chl.=
350
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPSB04
Höh
e= 7
09
Breite= 1340
Wan
dhak
en=
665
4
4
38 38 Wange= 10 Wange= 10
Wandh.= 312 Wandh.= 640 Wandh.= 312
El.-Anschl.= 670
El.-
Ans
chl.=
350
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPSB05
Höh
e= 7
09
Breite= 1540
Wan
dhak
en=
665
4
4
38 38 Wange= 10 Wange= 10
Wandh.= 562 Wandh.= 340 Wandh.= 562
El.-Anschl.= 770
El.-
Ans
chl.=
350
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPSB06
Höh
e= 7
09
Gesamtbreite= 1840
Wan
dhak
en=
665
4
4
38 Wange= 10
Wandhaken= 854 56 Wange= 10
COL-LI= 910 COL-RE= 910
El.-
Ans
chl.=
351
,50
Wandhaken= 854 38
El.-Anschl.= 460 El.-Anschl.= 460
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPSB07
63 63 Wandhaken= Breite - 2*63mm Breite= 800 - 1200
77
Höh
e= 6
00
Höh
e W
andh
aken
= 5
23
El.-Anschl.= Breite / 2
El.-
Ans
chl.=
300
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPV01_0800-1200
63 63 Breite= 1201 - 1600
77
Höh
e= 6
00
Höh
e W
andh
aken
= 5
23
Wandhaken= (Breite/2) - 63mm Wandhaken= (Breite/2) - 63mm
El.-Anschl.= Breite / 2 E
l.-A
nsch
l.= 3
00
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPV01_1201-1600
63 63 Breite= 1601 - 2000
77
Höh
e= 6
00
Höh
e W
andh
aken
= 5
23
(Breite / 3) - 50 (Breite / 3) - 50
El.-Anschl.= Breite / 4
El.-
Ans
chl.=
300
El.-Anschl.= Breite / 4
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPV01_1601-2000
63 Breite
77
Höh
e= 6
00
Höh
e W
andh
aken
= 5
23
Wandhaken= 472
Kip
psic
heru
ng=
64
= =
Klappelement= 400 Wandelement = Breite - 404
El.-Anschl./Kippsicherung= Wandelement/2 + 3
El.-
Ans
chl.=
300
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPV02_1203-1600
63 Breite
77
Höh
e= 6
00
Höh
e W
andh
aken
= 5
23
Wandhaken= 472
KIS
= 64
=
KLE= 400 WAE = Breite - 404
= WAE/3
El.-Anschl./KIS= WAE/2 + 3
El.-
Ans
chl.=
300
Beschreibung:KLE = KlappelementWAE = WandelementKIS = Kippsicherung
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPV02_1601-2000
63 Breite
77
Höh
e= 6
00
Höh
e W
andh
aken
= 5
23
Wandhaken= 472 K
IS=
64
WAE/4-63
KLE= 400 WAE = Breite - 404
WAE/4-63 = =
KIS= WAE/2 + 3
El.-
Ans
chl.=
300
WAE/4 WAE/4
Beschreibung:KLE = KlappelementWAE = WandelementKIS = Kippsicherung
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPV02_2001-2400
Breite
77
Höh
e= 6
00
Höh
e W
andh
aken
= 5
23
Wandhaken= 472 Wandhaken= 472 WAE/3 - 67
Kip
psic
heru
ng=
64
WAE/3 - 67
KLE= 400 WAE= Breite - 806 KLE= 400
El.-Anschl./Kippsicherung= Breite / 2
El.-
Ans
chl.=
300
Beschreibung:KLE = KlappelementWAE = WandelementKIS = Kippsicherung
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPV03_1655-2000
Breite
77
Höh
e= 6
00
Höh
e W
andh
aken
= 5
23
Wandhaken= 472 Wandhaken= 472 WAE/4 - 66
KIS
= 64
WAE/4 - 66 = =
WAE= Breite - 806 KLE= 400 KLE= 400 KIS= Breite / 2
El.-
Ans
chl.=
300
WAE/4 WAE/4
Beschreibung:KLE = KlappelementWAE = WandelementKIS = Kippsicherung
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPV03_2001-2400
Breite
77
Höh
e= 6
00
Höh
e W
andh
aken
= 5
23
Wandh.= 472 Wandh.= 472 WAE/5 - 65
KIS
= 64
WAE/5 - 65
WAE= Breite - 806 KLE= 400 KLE= 400
WAE/5 - 2 WAE/5 - 2
KIS= Breite / 2
El.-
Ans
chl.=
300
WAE/4 WAE/4
Beschreibung:KLE = KlappelementWAE = WandelementKIS = Kippsicherung
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
15.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-SPV03_2401-2800
Höh
e W
andh
aken
= 7
73
Z-Winkel.= 262
Breite= 350
329
H
öhe=
512
28 44
28 44
Obe
rkan
te W
asch
tisch
unte
rsch
rank
= 8
41
Was
chtis
ch=
9
OK
Was
chtis
ch=
850
Waschtischbreite= variabel Wandh.= 294
Zus
atzs
iche
rung
swin
kel=
679
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-U2L-01_K(D)WTV54
Höh
e W
andh
aken
= 7
62
Z-Winkel.= 262
Was
chtis
ch=
20
Breite= 350
Waschtischbreite= variabel
Obe
rkan
te W
asch
tisch
= 8
50
318
H
öhe=
512
28 44
28 44
Obe
rkan
te W
asch
tisch
unte
rsch
rank
= 8
30
Wandh.= 294
Zus
atzs
iche
rung
swin
kel=
668
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-U2L-01_MM(D)WTV54
Höh
e W
andh
aken
= 7
73
Z-Winkel.= 412
Breite= 500
Was
chtis
chun
terk
ante
= 8
41
329
H
öhe=
512
28 44
28 44
Was
chtis
ch=
9
Waschtischbreite= variabel
Obe
rkan
te W
asch
tisch
= 8
50
Wandh.= 444
Zus
atzs
iche
rung
swin
kel=
679
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-U2L-02_K(D)WTV54
Höh
e W
andh
aken
= 7
62
Z-Winkel.= 412
Was
chtis
ch=
20
Breite= 500
Waschtischbreite= variabel
Obe
rkan
te W
asch
tisch
= 8
50
Was
chtis
chun
terk
ante
= 8
30
318
H
öhe=
512
28 44
28 44
Wandh.= 444
Zus
atzs
iche
rung
swin
kel=
668
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-U2L-02_MM(D)WTV54
Höh
e W
andh
aken
= 7
73
Z-Winkel.= 262
Breite= 350
Was
chtis
chun
terk
ante
= 8
41
329
H
öhe=
512
28 44
28 44
Was
chtis
ch=
9
Waschtischbreite= variabel
Obe
rkan
te W
asch
tisch
= 8
50
Wandh.= 294
Zus
atzs
iche
rung
swin
kel=
679
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-U2LB-01_K(D)WTV54
Höh
e W
andh
aken
= 7
62
Z-Winkel.= 262
Was
chtis
ch=
20
Breite= 350
Waschtischbreite= variabel
Obe
rkan
te W
asch
tisch
= 8
50
Was
chtis
chun
terk
ante
= 8
30
318
H
öhe=
512
28 44
28 44
Wandh.= 294
Zus
atzs
iche
rung
swin
kel=
668
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-U2LB-01_MM(D)WTV54
780
20
60
210
= =
108
,5
318
7
3,5
78,5 78,5 623
500
145
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
MMWT54-780
Höh
e W
andh
aken
= 7
73
Z-Winkel.= 412
Breite= 500
Was
chtis
chun
terk
ante
= 8
41
329
H
öhe=
512
28 44
28 44
Was
chtis
ch=
9
Waschtischbreite= variabel
Obe
rkan
te W
asch
tisch
= 8
50
Wandh.= 444
Zus
atzs
iche
rung
swin
kel=
679
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-U2LB-02_K(D)WTV54
Höh
e W
andh
aken
= 7
62
Z-Winkel.= 412
Was
chtis
ch=
20
Breite= 500
Waschtischbreite= variabel
Obe
rkan
te W
asch
tisch
= 8
50
Was
chtis
chun
terk
ante
= 8
30
318
H
öhe=
512
28 44
28 44
Wandh.= 444
Zus
atzs
iche
rung
swin
kel=
668
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-U2LB-02_MM(D)WTV54
38 38Wandh. 295
Korpus 710
Korpus 371
47
Höhe Wandhaken 663
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screw hooks, dimensions for mounting and drain
www.pelipal.com
07.10.2015
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und Personenschäden
Bei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung .
• Die Montage muß durch fachkundiges Personal erfolgen.
• Beachten Sie die beiliegenden Montageanleitungen.
• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel.
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technician
and according to both IEC 60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.
We will not be held responsible in case of disregard.
• Assembly must be carried out by skilled personnel.
• Take notice of enclosed installation instructions.
• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
Solitaire 6010 6010-WS01
Solitaire 6010
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
Z
usat
zsic
heru
ngsw
inke
l= 6
09
Wan
dhak
en=
688
329
H
öhe=
512
38 54
38 54
Wandhaken= 694 Zusatzsicherungswinkel= 662
Breite= 770
Obe
rkan
te W
asch
tisch
= 8
50
Obe
rkan
te W
asch
tisch
unte
rsch
rank
= 8
41
Was
chtis
ch=
9
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
21.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL01_KWT54-780
Obe
rkan
te W
asch
tisch
= 8
50
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
Z
usat
zsic
heru
ngsw
inke
l= 5
98
Wan
dhak
en=
677
318
H
öhe=
512
O
berk
ante
Was
chtis
chun
terk
ante
= 8
30
Was
chtis
ch=
20 Waschtisch= 780
38 54
38 54
Wandhaken= 694 Zusatzsicherungswinkel= 662
Breite= 770
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
21.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL01_MMWT54-780
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
609
H
öhe
Wan
dhak
en=
688
329
H
öhe=
512
38 54 Zusatzsicherungswinkel= 404
Wandhaken= 694 Zusatzsicherungswinkel= 662
Breite= 1120
Höh
e W
andh
aken
= 8
03
Abfluss= 735
56
COL-LI= 750 COL-RE= 350 Wange= 10 Wange= 10
Obe
rkan
te W
asch
tisch
unte
rsch
rank
= 8
41
Obe
rkan
te W
asch
tisch
= 8
50
Was
chtis
ch=
9 Waschtisch= 1130
38 Wandhaken= 294
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
21.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL02_KWT54-1130L
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
598
H
öhe
Wan
dhak
en=
677
318
H
öhe=
512
38 54 Zusatzsicherungswinkel= 404
Wandhaken= 694 Zusatzsicherungswinkel= 662
Breite= 1120
Höh
e W
andh
aken
= 7
92
Abfluss= 735
56
COL-LI= 750 COL-RE= 350 Wange= 10 Wange= 10
Was
chtis
ch=
20
Obe
rkan
te W
asch
tisch
unte
rkan
te=
830
Waschtischbreite= 1130
OK
Was
chtis
ch=
850
38 Wandhaken= 294
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
21.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL02_MMWT54-1130L
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
609
H
öhe
Wan
dhak
en=
688
329
H
öhe=
512
Wandhaken= 388 54
Wandhaken= 694 Zusatzsicherungswinkel= 662
Breite= 1120 Abfluss= 385
COL-LI= 350 COL-RE= 750 Wange= 10 Wange= 10
38 38
Wan
dhak
en=
803
O
berk
ante
Was
chtis
chun
ters
chra
nk=
841
Obe
rkan
te W
asch
tisch
= 8
50
Was
chtis
ch=
9 Waschtischbreite= 1130
Wandhaken= 294
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
21.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL03_KWT54-1130R
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
598
H
öhe
Wan
dhak
en=
677
318
H
öhe=
512
Wandhaken= 388 54
Wandhaken= 694 Zusatzsicherungswinkel= 662
Breite= 1120 Abfluss= 385
COL-LI= 350 COL-RE= 750 Wange= 10 Wange= 10
Was
chtis
ch=
20 Waschtischbreite= 1130
OK
Was
chtis
ch=
850
38 38
Wan
dhak
en=
792
O
berk
ante
Was
chtis
chun
ters
chra
nk=
830
Wandhaken= 294
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
21.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL03_MMWT54-1130R
Höh
e A
bflu
ss=
500
Höh
e E
ckve
ntile
= 5
50
329
H
öhe=
512
38
54
Wandhaken= 694
Zusatzsicherungswinkel= 662
Breite= 1320
Höh
e W
andh
aken
= 7
73
Abfluss= 935
COL-LI= 750 COL-RE= 350 Wange= 10 Wange= 10
Obe
rkan
te W
asch
tisch
unte
rkan
te=
841
COL-MI= 200
71 114 71
288 262 54 Waschtischbreite= 1330
OK
Was
chtis
ch=
850
Was
chtis
ch=
9
38 Wandh.= 294
Zus
atzs
iche
rung
swin
kel=
679
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
21.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL04_KWT54-1330L
Höh
e A
bflu
ss=
500
Höh
e E
ckve
ntile
= 5
50
318
H
öhe=
512
38
54
Wandhaken= 694
Zusatzsicherungswinkel= 662
Breite= 1320
Höh
e W
andh
aken
= 7
62
Abfluss= 935
COL-LI= 750 COL-RE= 350 Wange= 10 Wange= 10
Was
chtis
ch=
20
Obe
rkan
te W
asch
tisch
unte
rkan
te=
830
Waschtischbreite= 1330
OK
Was
chtis
ch=
850
COL-MI= 200
71 114 71
288 262 54
38 Wandh.= 294
Zus
atzs
iche
rung
swin
kel=
668
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
21.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL04_MMWT54-1330L
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
679
329
H
öhe=
512
54 Wandhaken= 694
Zusatzsicherungswinkel= 662
Breite= 1320 Abfluss= 385
COL-MI= 200 Wange= 10 Wange= 10
Obe
rkan
te W
asch
tisch
unte
rkan
te=
841
114
COL-LI= 350 COL-RE= 750
Höh
e W
andh
aken
= 7
73
38 38 71 71 54 262 288
Waschtischbreite= 1330
Was
chtis
ch=
9
Obe
rkan
te W
asch
tisch
= 8
50
Wandh.= 294
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
21.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL05_KWT54-1330R
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
668
318
H
öhe=
512
54 Wandhaken= 694
Zusatzsicherungswinkel= 662
Breite= 1320
Abfluss= 385
COL-MI= 200 Wange= 10 Wange= 10
Was
chtis
ch=
20
Obe
rkan
te W
asch
tisch
unte
rkan
te=
830
Waschtischbreite= 1330
OK
Was
chtis
ch=
850
114
COL-LI= 350 COL-RE= 750
Höh
e W
andh
aken
= 7
62
38 38 71 71 54 262 288
Wandh.= 294
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
21.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL05_MMWT54-1330R
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
609
H
öhe
Wan
dhak
en=
688
329
H
öhe=
512
38 54 Zusatzsich.-winkel= 354
Wandhaken= 944 Zusatzsicherungswinkel= 912
Breite= 1320
Höh
e W
andh
aken
= 8
03
Abfluss= 660
56
COL-LI= 1000 COL-RE= 300 Wange= 10 Wange= 10
Obe
rkan
te W
asch
tisch
unte
rkan
te=
841
W
asch
tisch
= 9
Waschtischbreite= 1330
OK
Was
chtis
ch=
850
38 Wandh.= 244
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
21.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL06_KWT54-1330M
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
598
H
öhe
Wan
dhak
en=
677
318
H
öhe=
512
38 54 Zusatzsich.-winkel= 354
Wandhaken= 944 Zusatzsicherungswinkel= 912
Breite= 1320
Höh
e W
andh
aken
= 7
92
Abfluss= 660
56
COL-LI= 1000 COL-RE= 300 Wange= 10 Wange= 10
Was
chtis
ch=
20
Obe
rkan
te W
asch
tisch
unte
rkan
te=
830
Waschtischbreite= 1330
OK
Was
chtis
ch=
850
38 Wandh.= 244
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
21.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL06_MMWT54-1330M
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
609
H
öhe
Wan
dhak
en=
688
329
H
öhe=
512
Zusatzs.-Winkel= 354 54 Wandhaken= 944
Zusatzsicherungswinkel= 912
Breite= 1320 Abfluss= 660
COL-LI= 300 COL-RE= 1000 Wange= 10 Wange= 10
Obe
rkan
te W
asch
tisch
unte
rkan
te=
841
38 38 56
Höh
e W
andh
aken
= 8
03
Was
chtis
ch=
9 Waschtischbreite= 1330
Obe
rkan
te W
asch
tisch
= 8
50
Wandh.= 244
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
21.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL07_KWT54-1330M
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
598
H
öhe
Wan
dhak
en=
677
318
H
öhe=
512
Zusatzs.-Winkel= 354 54 Wandhaken= 944
Zusatzsicherungswinkel= 912
Breite= 1320 Abfluss= 660
COL-LI= 300 COL-RE= 1000 Wange= 10 Wange= 10
Was
chtis
ch=
20
Obe
rkan
te W
asch
tisch
unte
rkan
te=
830
Waschtischbreite= 1330
OK
Was
chtis
ch=
850
38 38 56
Höh
e W
andh
aken
= 7
92
Wandh.= 244
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
21.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL07_MMWT54-1330M
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
Höh
e Zu
satz
s.-w
inke
l= 6
09
Höh
e W
andh
aken
= 6
88
329
H
öhe=
512
Breite= 1520
Abfluss= 375 COL-LI= 750
Wange= 10 Wange= 10
COL-RE= 750 Abfluss= 770 Abfluss= 375
38 Wandhaken= 694 56 Wandhaken= 694 38 54 Zusatzsicherungswinkel= 662 88 Zusatzsicherungswinkel= 662 54
Was
chtis
chun
terk
ante
= 8
41
Was
chtis
ch=
9 Waschtischbreite= 1530
Obe
rkan
te W
asch
tisch
= 8
50
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
21.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL08_KDWT54-1530
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
Höh
e Zu
satz
s.-w
inke
l= 5
98
Höh
e W
andh
aken
= 6
77
318
H
öhe=
512
Breite= 1520
Abfluss= 375 COL-LI= 750
Wange= 10 Wange= 10
COL-RE= 750 Abfluss= 770 Abfluss= 375
38 Wandhaken= 694 56 Wandhaken= 694 38 54 Zusatzsicherungswinkel= 662 88 Zusatzsicherungswinkel= 662 54
Waschtischbreite= 1530
Was
chtis
ch=
20
Was
chtis
chun
terk
ante
= 8
30
OK
Was
chtis
ch=
850
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
22.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL08_MMDWT54-1530
Höh
e A
bflu
ss=
500
Höh
e E
ckve
ntile
= 5
50
Höh
e Zu
satz
s.-w
inke
l= 6
09
Höh
e W
andh
aken
= 6
88
329
H
öhe=
512
Breite= 1820
Abfluss= 500 COL-LI= 900
Wange= 10 Wange= 10
COL-RE= 900 Abfluss= 820 Abfluss= 500
38 Wandhaken= 844 56 Wandhaken= 844 38 54 Zusatzsicherungswinkel= 812 88 Zusatzsicherungswinkel= 812 54
Was
chtis
chun
ters
chra
nk=
841
W
asch
tisch
= 9
Waschtischbreite= 1830
Obe
rkan
te W
asch
tisch
= 8
50
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
22.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL09_KDWT54-1830
Höh
e A
bflu
ss=
500
Höh
e E
ckve
ntile
= 5
50
Höh
e Zu
satz
s.-w
inke
l= 5
98
Höh
e W
andh
aken
= 6
77
318
H
öhe=
512
Breite= 1820
Abfluss= 500 COL-LI= 900
Wange= 10 Wange= 10
COL-RE= 900 Abfluss= 820 Abfluss= 500
38 Wandhaken= 844 56 Wandhaken= 844 38 54 Zusatzsicherungswinkel= 812 88 Zusatzsicherungswinkel= 812 54
Waschtischbreite= 1830
Was
chtis
ch=
20
Was
chtis
chun
ters
chra
nk=
830
OK
Was
chtis
ch=
850
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
22.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL09_MMDWT54-1830
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
Z
usat
zsic
heru
ngsw
inke
l= 6
79
Wan
dhak
en=
773
Wandhaken= 694 Zusatzsicherungswinkel= 662
28 44
28 44
Breite= 750
Obe
rkan
te W
asch
tisch
unte
rsch
rank
= 8
41
Höh
e= 5
12
329
W
asch
tisch
= 9
Waschtischbreite= variabel
Obe
rkan
te W
asch
tisch
= 8
50
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
22.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL10_KWTV54
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
Z
usat
zsic
heru
ngsw
inke
l= 6
68
Wan
dhak
en=
762
Wandhaken= 694 Zusatzsicherungswinkel= 662
28 44
Waschtischbreite= variabel
28 44
Obe
rkan
te W
asch
tisch
= 8
50
Breite= 750
Obe
rkan
te W
asch
tisch
unte
rsch
rank
= 8
30
Höh
e= 5
12
318
W
asch
tisch
= 2
0
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
22.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL10_MMWTV54
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzs.
-win
kel=
679
H
öhe
Wan
dhak
en=
773
Abfluss= 770
Wandhaken= 694 56 Wandhaken= 694 Zusatzsicherungswinkel= 662 88 Zusatzsicherungswinkel= 662
Höh
e W
asch
tisch
unte
rkan
te=
841
Abfluss= 365 365 COL-LI= 750 COL-RE= 750
Breite= 1500 329
H
öhe=
512
28 44
28 44
Waschtischbreite= variabel
Was
chtis
ch=
9
Obe
rkan
te W
asch
tisch
= 8
50
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
22.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL11_KDWTV54
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzs.
-win
kel=
668
H
öhe
Wan
dhak
en=
762
Abfluss= 770
Wandhaken= 694 56 Wandhaken= 694 Zusatzsicherungswinkel= 662 88 Zusatzsicherungswinkel= 662
Was
chtis
ch=
20
Höh
e W
asch
tisch
unte
rkan
te=
830
OK
Was
chtis
ch=
850
Abfluss= 365 365 COL-LI= 750 COL-RE= 750
Breite= 1500 318
H
öhe=
512
28 44
28 44
Waschtischbreite= variabel
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
22.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSL11_MMDWTV54
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
Z
usat
zsic
heru
ngsw
inke
l= 6
09
Wan
dhak
en=
688
329
H
öhe=
512
O
berk
ante
Was
chtis
chun
terk
ante
= 8
41
38 54
38 54
Wandhaken= 694 Zusatzsicherungswinkel= 662
Breite= 770
Was
chtis
ch=
9 Waschtischbreite= 780
Obe
rkan
te W
asch
tisch
= 8
50
El.-Anschl.= 150
El.-
Ans
chl.=
150
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
22.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB01_KWT54-780
Obe
rkan
te W
asch
tisch
= 8
50
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
Z
usat
zsic
heru
ngsw
inke
l= 5
98
Wan
dhak
en=
677
318
H
öhe=
512
O
berk
ante
Was
chtis
chun
terk
ante
= 8
30
Was
chtis
ch=
20 Waschtisch= 780
38 54
38 54
Wandhaken= 694 Zusatzsicherungswinkel= 662
Breite= 770
El.-Anschl.= 150
El.-
Ans
chl.=
150
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
22.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB01_MMWT54-780
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
609
H
öhe
Wan
dhak
en=
688
329
H
öhe=
512
38 54 Zusatzsicherungswinkel= 404
Wandhaken= 694 Zusatzsicherungswinkel= 662
Breite= 1120
Höh
e W
andh
aken
= 8
03
Abfluss= 735
56
COL-LI= 750 COL-RE= 350 Wange= 10 Wange= 10
Obe
rkan
te W
asch
tisch
unte
rkan
te=
841
W
asch
tisch
= 9
Obe
rkan
te W
asch
tisch
= 8
50
Waschtischbreite= 1130
38 Wandhaken= 294
Elektroanschluss= 510
El.-
Ans
chl.=
150
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
22.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB02_KWT54-1130L
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
598
H
öhe
Wan
dhak
en=
677
318
H
öhe=
512
38 54 Zusatzsicherungswinkel= 404
Wandhaken= 694 Zusatzsicherungswinkel= 662
Breite= 1120
Höh
e W
andh
aken
= 7
92
Abfluss= 735
56
COL-LI= 750 COL-RE= 350 Wange= 10 Wange= 10
Was
chtis
ch=
20
Obe
rkan
te W
asch
tisch
unte
rkan
te=
830
Waschtischbreite= 1130
OK
Was
chtis
ch=
850
38 Wandhaken= 294
Elektroanschluss= 510
El.-
Ans
chl.=
150
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
22.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB02_MMWT54-1130L
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
609
H
öhe
Wan
dhak
en=
688
329
H
öhe=
512
Wandhaken= 388 54
Wandhaken= 694 Zusatzsicherungswinkel= 662
Breite= 1120 Abfluss= 385
COL-LI= 350 COL-RE= 750 Wange= 10 Wange= 10
Obe
rkan
te W
asch
tisch
unte
rkan
te=
841
38 38
Wan
dhak
en=
803
Waschtischbreite= 1130
Was
chtis
ch=
9
Obe
rkan
te W
asch
tisch
= 8
50
Wandhaken= 294
Elektroanschluss= 510
El.-
Ans
chl.=
150
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
22.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB03_KWT54-1130R
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
598
H
öhe
Wan
dhak
en=
677
318
H
öhe=
512
Wandhaken= 388 54
Wandhaken= 694 Zusatzsicherungswinkel= 662
Breite= 1120 Abfluss= 385
COL-LI= 350 COL-RE= 750 Wange= 10 Wange= 10
Was
chtis
ch=
20
Obe
rkan
te W
asch
tisch
unte
rkan
te=
830
Waschtischbreite= 1130
OK
Was
chtis
ch=
850
38 38
Wan
dhak
en=
792
Wandhaken= 294
Elektroanschluss= 510
El.-
Ans
chl.=
150
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
22.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB03_MMWT54-1130R
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
329
H
öhe=
512
38
54
Wandhaken= 694
Zusatzsicherungswinkel= 662
Breite= 1320
Höh
e W
andh
aken
= 7
73
Abfluss= 935
COL-LI= 750 COL-RE= 350 Wange= 10 Wange= 10
Obe
rkan
te W
asch
tisch
unte
rsch
rank
= 8
41
COL-MI= 200
71 114 71
288 262 54
Was
chtis
ch=
9 Waschtischbreite= 1330
Obe
rkan
te W
asch
tisch
= 8
50
38 Wandh.= 294
Elektroanschluss= 710
El.-
Ans
chl.=
468
Zus
atzs
iche
rung
swin
kel=
679
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
22.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB04_KWT54-1330L
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
318
H
öhe=
512
38
54
Wandhaken= 694
Zusatzsicherungswinkel= 662
Breite= 1320
Höh
e W
andh
aken
= 7
62
Abfluss= 935
COL-LI= 750 COL-RE= 350 Wange= 10 Wange= 10
Was
chtis
ch=
20
Obe
rkan
te W
asch
tisch
unte
rsch
rank
= 8
30
Waschtischbreite= 1330
OK
Was
chtis
ch=
850
COL-MI= 200
71 114 71
288 262 54
38 Wandh.= 294
Elektroanschluss= 710
El.-
Ans
chl.=
468
Zus
atzs
iche
rung
swin
kel=
668
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
22.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB04_MMWT54-1330L
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
679
329
H
öhe=
512
54 Wandhaken= 694
Zusatzsicherungswinkel= 662
Breite= 1320
Abfluss= 385
COL-MI= 200 Wange= 10 Wange= 10
Obe
rkan
te W
asch
tisch
unte
rkan
te=
841
114
COL-LI= 350 COL-RE= 750
Höh
e W
andh
aken
= 7
73
38 38 71 71 54 262 288
Was
chtis
ch=
9
Waschtischbreite= 1330
Obe
rkan
te W
asch
tisch
= 8
50
Wandh.= 294
El.-
Ans
chl.=
468
Elektroanschluss= 610
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
23.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB05_KWT54-1330R
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
668
318
H
öhe=
512
54 Wandhaken= 694
Zusatzsicherungswinkel= 662
Breite= 1320
Abfluss= 385
COL-MI= 200 Wange= 10 Wange= 10
Was
chtis
ch=
20
Obe
rkan
te W
asch
tisch
unte
rkan
te=
830
Waschtischbreite= 1330
OK
Was
chtis
ch=
850
114
COL-LI= 350 COL-RE= 750
Höh
e W
andh
aken
= 7
62
38 38 71 71 54 262 288
Wandh.= 294
El.-
Ans
chl.=
468
Elektroanschluss= 610
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
23.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB05_MMWT54-1330R
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
609
H
öhe
Wan
dhak
en=
688
329
H
öhe=
512
38 54 Zusatzsich.-winkel= 354
Wandhaken= 944 Zusatzsicherungswinkel= 912
Breite= 1320
Höh
e W
andh
aken
= 8
03
Abfluss= 660
56
COL-LI= 1000 COL-RE= 300 Wange= 10 Wange= 10
Obe
rkan
te W
asch
tisch
unte
rkan
te=
841
W
asch
tisch
= 9
Waschtischbreite= 1330
Obe
rkan
te W
asch
tisch
= 8
50
38 Wandh.= 244
Elektroanschluss= 460
El.-
Ans
chl.=
150
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
23.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB06_KWT54-1330M
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
598
H
öhe
Wan
dhak
en=
677
318
H
öhe=
512
38 54 Zusatzsich.-winkel= 354
Wandhaken= 944 Zusatzsicherungswinkel= 912
Breite= 1320
Höh
e W
andh
aken
= 7
92
Abfluss= 660
56
COL-LI= 1000 COL-RE= 300 Wange= 10 Wange= 10
Was
chtis
ch=
20
Obe
rkan
te W
asch
tisch
unte
rkan
te=
830
Waschtischbreite= 1330
OK
Was
chtis
ch=
850
38 Wandh.= 244
Elektroanschluss= 460
El.-
Ans
chl.=
150
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
23.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB06_MMWT54-1330M
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
609
H
öhe
Wan
dhak
en=
688
329
H
öhe=
512
Zusatzs.-Winkel= 354 54 Wandhaken= 944
Zusatzsicherungswinkel= 912
Breite= 1320 Abfluss= 660
COL-LI= 300 COL-RE= 1000 Wange= 10 Wange= 10
Obe
rkan
te W
asch
tisch
unte
rkan
te=
841
38 38 56
Höh
e W
andh
aken
= 8
03
Was
chtis
ch=
9 Waschtischbreite= 1330
Obe
rkan
te W
asch
tisch
= 8
50
Wandh.= 244
Elektroanschluss= 460
El.-
Ans
chl.=
150
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB07_KWT54-1330M
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzsi
cher
ungs
win
kel=
598
H
öhe
Wan
dhak
en=
677
318
H
öhe=
512
Zusatzs.-Winkel= 354 54 Wandhaken= 944
Zusatzsicherungswinkel= 912
Breite= 1320 Abfluss= 660
COL-LI= 300 COL-RE= 1000 Wange= 10 Wange= 10
Was
chtis
ch=
20
Obe
rkan
te W
asch
tisch
unte
rkan
te=
830
Waschtischbreite= 1330
OK
Was
chtis
ch=
850
38 38 56
Höh
e W
andh
aken
= 7
92
Wandh.= 244
Elektroanschluss= 460
El.-
Ans
chl.=
150
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB07_MMWT54-1330M
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
Höh
e Zu
satz
s.-w
inke
l= 6
09
Höh
e W
andh
aken
= 6
88
329
H
öhe=
512
Breite= 1520
Abfluss= 375 COL-LI= 750
Wange= 10 Wange= 10
COL-RE= 750 Abfluss= 770 Abfluss= 375
38 Wandhaken= 694 56 Wandhaken= 694 38
54 Zusatzsicherungswinkel= 662 88 Zusatzsicherungswinkel= 662 54
Was
chtis
chun
terk
ante
= 8
41
Was
chtis
ch=
9
Waschtischbreite= 1530
Obe
rkan
te W
asch
tisch
= 8
50
El.-
Ans
chl.=
150
Elektroanschluss= 610
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB08_KDWT54-1530
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
Höh
e Zu
satz
s.-w
inke
l= 5
98
Höh
e W
andh
aken
= 6
77
318
H
öhe=
512
Breite= 1520
Abfluss= 375 COL-LI= 750
Wange= 10 Wange= 10
COL-RE= 750 Abfluss= 770 Abfluss= 375
38 Wandhaken= 694 56 Wandhaken= 694 38
54 Zusatzsicherungswinkel= 662 88 Zusatzsicherungswinkel= 662 54 Waschtischbreite= 1530
Was
chtis
ch=
20
Was
chtis
chun
terk
ante
= 8
30
OK
Was
chtis
ch=
850
E
l.-A
nsch
l.= 1
50
Elektroanschluss= 610
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB08_MMDWT54-1530
Höh
e A
bflu
ss=
500
Höh
e E
ckve
ntile
= 5
50
Höh
e Zu
satz
s.-w
inke
l= 6
09
Höh
e W
andh
aken
= 6
88
329
H
öhe=
512
Breite= 1820
Abfluss= 500 COL-LI= 900
Wange= 10 Wange= 10
COL-RE= 900 Abfluss= 820 Abfluss= 500
38 Wandhaken= 844 56 Wandhaken= 844 38 54 Zusatzsicherungswinkel= 812 88 Zusatzsicherungswinkel= 812 54
Was
chtis
chun
terk
ante
= 8
41
Was
chtis
ch=
9 Waschtischbreite= 1830
Obe
rkan
te W
asch
tisch
= 8
50
El.-
Ans
chl.=
150
Elektroanschluss= 760
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB09_KDWT54-1830
Höh
e A
bflu
ss=
500
Höh
e E
ckve
ntile
= 5
50
Höh
e Zu
satz
s.-w
inke
l= 5
98
Höh
e W
andh
aken
= 6
77
318
H
öhe=
512
Breite= 1820
Abfluss= 500 COL-LI= 900
Wange= 10 Wange= 10
COL-RE= 900 Abfluss= 820 Abfluss= 500
38 Wandhaken= 844 56 Wandhaken= 844 38 54 Zusatzsicherungswinkel= 812 88 Zusatzsicherungswinkel= 812 54
Waschtischbreite= 1830
Was
chtis
ch=
20
Was
chtis
chun
terk
ante
= 8
30
OK
Was
chtis
ch=
850
E
l.-A
nsch
l.= 1
50
Elektroanschluss= 760
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB09_MMDWT54-1830
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
Z
usat
zsic
heru
ngsw
inke
l= 6
79
Wan
dhak
en=
773
Wandhaken= 694 Zusatzsicherungswinkel= 662
28 44
28 44
Breite= 750
Obe
rkan
te W
asch
tisch
unte
rsch
rank
= 8
41
Höh
e= 5
12
329
W
asch
tisch
= 9
Obe
rkan
te W
asch
tisch
= 8
50
Waschtischbreite= variabel
El.-Anschl.= 150
El.-
Ans
chl.=
150
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB10_KWTV54
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
Z
usat
zsic
heru
ngsw
inke
l= 6
68
Wan
dhak
en=
762
Wandhaken= 694 Zusatzsicherungswinkel= 662
28 44
Waschtischbreite= variabel
28 44
Obe
rkan
te W
asch
tisch
= 8
50
Breite= 750
Obe
rkan
te W
asch
tisch
unte
rsch
rank
= 8
30
Höh
e= 5
12
318
W
asch
tisch
= 2
0
El.-Anschl.= 150
El.-
Ans
chl.=
150
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB10_MWTV54
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzs.
-win
kel=
679
H
öhe
Wan
dhak
en=
773
Abfluss= 770
Wandhaken= 694 56 Wandhaken= 694 Zusatzsicherungswinkel= 662 88 Zusatzsicherungswinkel= 662
Höh
e W
asch
tisch
unte
rkan
te=
841
Abfluss= 365 Abfluss= 365 COL-LI= 750 COL-RE= 750
Breite= 1500 329
H
öhe=
512
28 44
28 44
Was
chtis
ch=
9 Waschtischbreite= variabel
Obe
rkan
te W
asch
tisch
= 8
50
Elektroanschluss= 610
El.-
Ans
chl.=
150
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB11_KDWTV54
Höh
e A
bflu
ss=
500
H
öhe
Eck
vent
ile=
550
H
öhe
Zusa
tzs.
-win
kel=
668
H
öhe
Wan
dhak
en=
762
Abfluss= 770
Wandhaken= 694 56 Wandhaken= 694 Zusatzsicherungswinkel= 662 88 Zusatzsicherungswinkel= 662
Was
chtis
ch=
20
Höh
e W
asch
tisch
unte
rkan
te=
830
OK
Was
chtis
ch=
850
Abfluss= 365 Abfluss= 365 COL-LI= 750 COL-RE= 750
Breite= 1500 318
H
öhe=
512
28 44
28 44
Waschtischbreite= variabel
Elektroanschluss= 610
El.-
Ans
chl.=
150
Bodenplatte
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
6010-WTUSLB11_MMDWTV54
9 1130
390 740
60
290
120
3
8
50 400
498
117
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
KWT54-1130L
1130
9
740 390
60
290
50 400
38
120
498
117
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
KWT54-1130R
9 1330
390 940
60
290
120
3
8
50 600
498
117
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
KWT54-1330L
9 1330
665 665
60
290
325 325
38
120
498
117
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
KWT54-1330M
9 1330
600 50
38
120
60
290
390 940
117
498
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
KWT54-1330R
9 780
60
290
50 50
38
120
= =
117
498
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
KWT54-780
1130
20
428,5 623 78,5
73,
5 3
18
108
,5 390 740
60
210
500
145
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
MMWT54-1130L
1130
20
390 740
60
210
623
318
7
3,5
108
,5
428,5 78,5
500
145
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
MMWT54-1130R
1330
20
390 940
60
210
108
,5
318
7
3,5
623 78,5 628,5
500
145
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
MMWT54-1330L
1330
20
= =
73,
5 3
18
108
,5
353,5 623 353,5
60
210
500
145
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
MMWT54-1330M
1330
20
390 940
60
210
108
,5
318
7
3,5 628,5 623 78,5
500
145
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
MMWT54-1330R
780
20
60
210
= =
108
,5
318
7
3,5
78,5 78,5 623
500
145
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.pelipal.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.pelipal.com
www.pelipal.com
26.10.2015
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
MMWT54-780