350335EN, Fusion PC Gun (ProConnect) Sell Sheet · Title: 350335EN, Fusion PC Gun (ProConnect) Sell...
Transcript of 350335EN, Fusion PC Gun (ProConnect) Sell Sheet · Title: 350335EN, Fusion PC Gun (ProConnect) Sell...
FUSION® PCThe Fastest Air-Purge Gun to Rebuild
©2019 Graco Inc. ELECTRONIC ONLY 350335 Rev. A 10/19 All other brand names or marks are used for identification purposes and are trademarks of their respective owners. All written and visual data contained in this document are based on the latest product information available at the time of publication. For more information on Graco’s Intellectual Property see www.graco.com/patent or www.graco.com/trademarks. Graco reserves the right to make changes at any time without notice.
Contact us today!Visit www.graco.com/fusionpc to learn more or have a Graco representative contact you.
Rebuild Like a Pro
Maximizing uptime and maintaining a great spray pattern are essential to thriving contractors. By significantly decreasing the labor and troubleshooting time required to keep guns in service, you can now focus on the rest of your business. With ProConnect technology in the Fusion PC gun, the entire fluid section including the side seals and all associated o-rings are replaced in a single cartridge compared to individual parts. This means you can stock fewer parts and have a perfect rebuild in seconds, with a factory tested replacement cartridge.
Factory Rebuild with ProConnect Technology
Troubleshooting a gun in the field can be a difficult task, especially for new applicators, due to the amount of moving parts required to properly spray fast-set two component materials. Having the ability to perform a factory rebuild on the job site with minimal downtime will allow the sprayer to spend more time spraying, maximizing uptime, and getting jobs done faster.
Ordering Information
Fusion PC Guns, Round
25P588 PC42RD (01) mix chamber (0.042 orifice size)
25P589 PC52RD (02) mix chamber (0.052 orifice size)
Fusion PC Gun Retrofit, Round
25P701 PC42RD (01) mix chamber (0.042 orifice size)
25P702 PC52RD (02) mix chamber (0.052 orifice size)
Repair Parts
19Y301 Fusion ProConnect Replacement Cartridge, 3 pack
19Y308 Fusion ProConnect Replacement Cartridge, 5 pack
A/B Fluid Check Valves
• Cross-overs remain contained in cartridge
ProConnect Replacement Cartridge
• Fully assembled and factory tested
• Contains side seals and all related o-rings in one simple part
Clean-off Air Port
• Maintain spray pattern throughout the day
Air-Purge Check Valve
• Prevents cross-overs from entering gun air piston
Fluid Housing with ProConnect Technology
• Replace fluid cartridge in seconds
Stainless Steel Hose Manifold
• Uses same long lasting Fusion AP/MP fluid manifold
Simple Safety Stop
• Manually position on/off mode
Fusion AP Spray Technology
• Excellent spray performance in an easy to use, easy to clean gun
Ergonomic Handle
• Comfortably spray all day long with Fusion’s
ergonomically designed
handle