3258 Portable Jaw Crusher Model 3258-lP-PP/VGF · hard quarried stone or demolition debris. ... The...
Transcript of 3258 Portable Jaw Crusher Model 3258-lP-PP/VGF · hard quarried stone or demolition debris. ... The...
The 3258 is a low profile, severe duty, high
production portable plant designed for ease of
travel and safe operation. Equipped with a 3258
Hydraulic Jaw Crusher and 60” x 20’ Grizzly
Feeder, the plant is ideally suited for crushing
hard quarried stone or demolition debris.
The Telsmith designed and manufactured
chassis is built to withstand the rigors of
portable operation. Folding support legs
and operator’s platform, along with optional
hydraulic leveling systems, allow for quick
mobilization. The low profile 13’-6 travel height
and maximum width of 9’-11” simplifies moving
between sites. Large service platforms provide
good work areas for safe maintenance.
The advanced 3258 jaw crusher with hydraulic
adjustment and overload relief is at the heart of
the plant’s production capability. Combining a
32” gape and 58” width with low nip angles, it
out-produces other crushers in its class. Finger
tip controlled hydraulic adjustment reduces
maintenance time, and the hydraulic overload
relief system automatically protects the crusher
from tramp metal.
A heavy duty 60” wide X 20’ long grizzly feeder
controls the feed to the crusher. Arranged into a
skid module that includes the feed hopper, by-
pass chute and feeder drive, the entire module
can be slid off the back of the plant, simplifying
travel in severely weight-restricted areas.
For portable plant operators who demand
safe, low cost production, the 3258-LP-PP/VGF
provides solid reliability and optimum crushing
to deliver consistent performance.
3258 Portable Jaw CrusherModel 3258-lP-PP/VGF
3258 p
or
tab
le p
lan
t
3 2 5 8 p o r t a b l e c r u s h i n g p l a n t
The model 3258 jaw crusher offers state of the art crushing technology with hydraulic adjustment and overload protection.
Massive hydraulic cylinders adjust the crusher using push button controls. Hydraulic tension cylinders eliminate the need for spring adjustment so you are up and running in seconds.
A heavy duty 60” x 20’ vibrating grizzly feeder controls the feed to the crusher. Variable speed options are available.
The feeder is built into a skid module incorporating the feeder, loading hopper and grizzly by pass chute. The entire module can be removed as one unit,
sliding off the back of the plant, easing travel in severely weight-restricted areas.
The loading hopper and by pass chute are built from abrasion resistant high alloy steel providing longer wear life.
Vibrating grizzly Feeder:
3258 jaw crusher Features:
Hydraulic relief provides automatic
tramp iron protection
Hydraulic cylinders adjust the setting with
push button controls
Tension cylinders eliminate the need for
spring adjustment
A hydraulic relief system protects the 3258 from tramp iron. The system allows the crusher to operate safely at tight settings and automatically opens up to allow tramp metal to pass.
3258 p
or
tab
le p
lan
t
3 2 5 8 p o r t a b l e c r u s h i n g p l a n t
plant power options:
Electric: Electric drive options incorporate an elevated motor mount for optimum maintenance access behind the jaw.
Diesel: Diesel drive options incorporate a hydraulic belt tensioner and hydraulically activated clutch. Push button controls engage the clutch automatically. The belt tensioner eliminates routine belt maintenance.
Large Crusher Service Platform
Tri or Quad Axle Arrangements
Operators Platform With Folding Handrails
Adjustable Height Pivoting Support
P.O. Box 539 Mequon, WI 53092-0539
Phone: 800-765-6601 262-242-6600
Fax: 262-242-5812
©2007 Telsmith, Inc. 3258 Portable Plant 3/07
Telsmith Model 3258 Jaw Crusher: (60,000 lbs.) • 32” X 58” feed opening yielding high production • Hydraulic adjust with finger tip controls • Hydraulic overload system • Grease lubrication (optional oil lubrication)
Telsmith 60” x 20’ Vibrating Grizzly Feeder: (19,300 lbs.) • 5 ‘ grizzly section • ½” A-R steel pan liner • Optional variable speed drive (hydrostatic or A/C inverter)
Telsmith Chassis: • 13’-6” travel height • Receiving hopper and chutes fabricated from A-R steel • Removable grizzly feeder support module • 6 blocking support legs and two adjustable front pivoting support • King-pin front end with added clearance for tri-axle tractor • Operator’s platform with access ladder and folding hand rails • Crusher service platform • Tri-axle or quad-axle arrangements with air ride suspension • 2-point and 4-point hydraulic leveling systems (optional) Conveyor Option: • 54” x 30’ end discharge conveyor On-Plant Power: Electric Motor Option: • 200 HP crusher motor with slide base • 50 HP VGF motor with pivoting motor base • A/C inverter variable speed drive (optional) • Plant controls including starters and wiring (optional) Diesel Power Option: • Tier III diesel engine (approximately 365-hp-option CAT or Cummins) • Hydraulically activated clutch with push-button controls. • Hydraulic belt tensioning system eliminates adjustment. • Hydrostatic variable speed drive for VGF
Trav
el H
eigh
t
13’-
6’
18’- 11’ 5’- 11” 7’- 3” 15’- 8”
48’- 4’
9’-1
1”
Plant Weight
Assembled (Quad-axle, electric motor & plant controls)
Less VGF Module
At Kingpin 42,000 lbs At Kingpin 39,000 lbs
At Axles 84,000 lbs At Axles 55,000 lbs
Total 126,000 lbs Total 94,000 lbs
3258 plant speciFications:
Plant Dimensions: